Computer Support Forum

Satellite L350D-21 Problems using recovery disks to recovery to new HDD

Question: Satellite L350D-21 Problems using recovery disks to recovery to new HDD

Hi,

I have SATELLITE L350D-212 notebook with windows 7 home premium OA.
It started to complain that there was something wrong with the harddisk so I went and bought another harddisk of same size.

I have created the recovery disk when the computer was bought and have backup of all the data in external harddisk.

After I changed the new harddisk to the notebook and tried to boot from recovery disk nothing happens eventhoug I can see that there seems to be everything Ok with the disk.

Any ideas on how to get the recovery to run for the new harddisk?

I have the old harddisk attached as external disk via USB but can't boot from that too. It just stops at some point and says to shutdown.

Relevance 100%
Preferred Solution: Satellite L350D-21 Problems using recovery disks to recovery to new HDD

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Satellite L350D-21 Problems using recovery disks to recovery to new HDD

Hi

Usually the recovery disk should format the new HDD but I would recommend to attach the new HDD as an external device to another computer and to format this new HDD before trying to recover the notebook.

After the HDD has been formatted, connect it to the L350D and boot from the recover disk?

Good luck

8 more replies
Relevance 96.76%

Hi,
I bought Satellite A500 yesterday and now I am trying to create the recovery disks before anything else.
However, towards the end of the 1st DVD, I get an error message saying "Faile dto open the following file. e:\boot\bcd (Error code 0201123-F1-00000000)" and then when I click 'OK', the DVD is ejected giving a message 'failed to create recovery media 1'. Upon physical examining I have noted the DVD is written to almost full.

Any advise on this? Also, in the interface, it does show a USB option and says to insert a USB media with more than 7GB free. Can I use this to create the recovery disk? If so, when I reinstall windows 7, can this be used as a bootable disk?

Would greately appreciate any help on this issue. If it is malfunctioning, I want to return it ASAP.

Thanks,
Thilan.

Answer:Satellite A500 - problems with creating the recovery disks

As far as I know you cannot use external device for recovering so it is very important to create recovery DVDs.

Try to create recovery disc using DVD-R media only. Use high quality medias like TDK or Verbatim.
Last month I created recovery discs on Satellite A500-157 and everything went well.

2 more replies
Relevance 96.76%

Stop 0x000000001A *Memory_Management* Blue Screen during recovery.
Please help.

Answer:Satellite L500-12T System Recovery from Recovery Disks

First recovery or first notebook start?
HDD or DVD recovery?

1 more replies
Relevance 95.12%

Hallo everyone!

I've got a Satellite L350D with Windows Vista.
I'm on my mind to reinstall it.
All my data from both partitions are saved except for a folder on my disk E Data "HDDRecovery" which should not be modyfied or deleted or whatever.

I wonder if all the data are deleted from the hard drive due to formatting, then how does it appear that this very folder HDDRecovery stays safe on the hard drive?
Or is it that the hard drive is not really formatted and the data on my hard drive is still safe and hidden?

Thank`s for answers!

Answer:Questions about HDD Recovery Folder - Satellite L350D

Hello

I will try to explain how it works.

Original Toshiba recovery image designed for your notebook is saved on second partition in folder called ?HDDRecovery?. This image should be used if you want to install OS and have original ?factory state?.

For this installation you can use this recovery image from second partition or using recovery DVD. It is recommended for everyone to create this recovery DVD. Have you created it?

If you use recovery DVD the whole HDD will be formatted and all data saved on it will be deleted.
If you start HDD Recovery procedure only partition C will be deleted. This ?HDDRecovery? folder is important if you only want to use HDD recovery installation. When you want to use DVD only you can delete it (I don't recommend you to do this).

I hope I could help a little bit but if you have more questions please let us know.

4 more replies
Relevance 95.12%

Hi

I am trying to help a Damsel in distress. Her Satellite L350D-213 would not boot up. Though I could boot up in Safe Mode, that is all I could do. I tried to save all her data, but couldn't do that either. I carried out a HDD recovery and all seemed to be OK until I booted as normal, but when I tried to open up programs and they didn't open. I eventually called for a Shut Down. This took over 10 minutes.

I rebooted in Safe Mode and tried opening the pre installed programs on the Desktop and there appeared to be no problem. Shutting down took a whole 13 seconds!

Tried rebooting as normal and the same problem occurred.

I just have a feeling that one of the system files is corrupted. More than likely I am wrong, so is there anyone out there than can advise?

Thanks

Stokkers

Answer:Satellite L350D-213 Desktop freezing after HDD Recovery

It is not easy to say what is wrong there. Which programs you try to start?
Corrupted files? I don?t think so. You have installed clean recovery image and if there is some corrupted file the same should happen from the day one.

Start your notebook and enter BIOS settings, set it to default and install recovery image again.
Configure Windows and wait until OS starts properly. Don?t connect notebook to the internet and check it again. Don?t connect some external devices.
What you can try is to open task manager and see if there is some background activity that needs much CPU use. You can try to stop it.
You can try to disable some applications in start-up.

Play a little bit with all this.
There must be some logical explanation why this happen.

2 more replies
Relevance 95.12%

Hi,

Well, for the first time in 8 years I had to do a system recovery using the disks i created when i first bought my l300-13s using the Toshiba Recovery Disk Creator.
I had inadvertantly deleted the HDD Recovery partition when i set out to do a clone using a bigger HDD.

What I want to find out is instead of making recovery disks to DVD can i make a recovery USB flash drive?

Thanks

Peter.

Answer:Satellite L300-13S - Recovery USB instead of Recovery DVD Disks?

When you open Toshiba recovery media creator you can see options which media can be created. I?m not 100% sure but I think on old L300 there was option for recovery DVDs only so I think you cannot create recovery USB.

5 more replies
Relevance 92.25%

I have successfully loaded the recovery disc but still cannot start up. It says start up repair could not find a problem. I have got as far as the message:- Please wait a moment while windows starts for the first time - then it either freezes or turns off. Seem to be just going around in circles!
Can anybody please help?

More replies
Relevance 85.28%

can anybody help me. i am trying to use my recovery disks on my p10 but it will format so far and then just shut down. it gets to differant stages each time but been as how it started to format i now have no pc so if anybody can help i will love ya forever

Answer:Recovery disks for my Satellite P10

Hello,

did you checked your Recovery CD/DVD for scratches? Also it can be that your HDD has some faulty sectors which can be checked with Scandisk!
Scandsk is a DOS based tool which is on every MS bootdisk. You will find different bootdisks at www.bootdisk.info
When you will connect a FDD USB drive and start the notebok, you have to press F12 for boot menu! Choose FDD USB and the bootdisk will start. Then you can use scandisk.
After that you can use a tool called format.com
This will format your HDD.
When you finished and cleaned your recovery CD you should try the recovery again!

Theo

1 more replies
Relevance 85.28%

Hi,
I bought a refurbished Satellite M70-364 off of the internet but it has no recovery disks and I was wondering if any one would be willing to make me a copy of the Satellite M70 recovery disk or loan me the disks.
Would be very gratefull and will pay for the use of the disks please reply by e-mail [email protected]

cheers craig

Answer:Satellite M70-364 recovery disks

Hi,

you can try it here: http://backupmedia.toshiba.eu/landing.aspx

It?s a newly created site for people which need recovery media for their machine..

GReets

2 more replies
Relevance 85.28%

I have damaged my recovery disk 2 on my A30. Where can i get replacement?

Answer:Satellite A30: How to get the Recovery disks?

You will have to contact the ASP in your country for the CD order!
Such CD?s are not very expensive an I?m sure you can purchase the recovery CD from the Toshiba service point!

Please check this page to find the nearest ASP in your country!
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

2 more replies
Relevance 84.46%

Does anyone know where I can download or order the recovery disks for my M70, the place i took it to get it fixed said it cant be fixed without them.

Answer:Satellite M70: Where to order the Recovery Disks?

Hello Luke

Is your M70 not delivered with recovery DVD? As far as I know it is definitely delivered with recovery DVD and please asks your local dealer about that.

The recovery image can not be downloaded just ordered by Authorized Toshiba service partner in your country.

2 more replies
Relevance 84.46%

Hi

We have a Satellite Pro L10-135: Intel with Windows XP.

The laptop is a few years old and is full of spyware, my partner has also accidently deleted some program files. I have removed all personal files and would like to completely reformat the unit to factory condition.

But she has lost the recovery CDs. I have tried to get them from Toshiba, but when I enter the serial number it says that its too old and the disc is unavailable. I've also tried to find the Toshiba Recovery Disk Creator, but on the start menu, it is nowhere to be found instead it says Start>All Programmes>Toshiba>Networking or Start>All Programmes>Toshiba>Utilities.

I need the process to be idiot-proof as I am not too confident with computers, so I would like to get a genuine Toshiba restoration, rather than attemting to download individual drivers, etc.

Does anyone know where I could buy or download the disc in the UK?

Many thanks.

Answer:Satellite Pro L10-135 no recovery disks, need to restore

It is always problematic with old notebook models but what you can try is to contact nearest authorized Toshiba service provider in your country and ask for help.
Maybe they have somewhere archived old recovery discs and can help you with this.

One more thing: very often I saw that people offer recovery discs on eBay.
Check it out. Maybe you will be lucky and find recovery disc for your notebook model there.

2 more replies
Relevance 84.46%

Hi, I seem to be getting mixed messages from Toshiba about the availability of Recovery disks for my laptop. Are there any UK readers of this message board that would either sell me a spare copy they have that they no longer need or, do a copy for me of their recovery CD (and ideally the tools & utility CD) for this laptop? I would pay of course.

Answer:Satellite Pro 4340: Need Recovery Disks

Hi

The fact is that you will get all Toshiba CD from the service partner in your country.
You can order the Recovery CD and all another CDs.
I'm sure it's not very expensive.

Check this link:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
There you will find the ASP in your country.

4 more replies
Relevance 84.46%

I have lost the recovery disk for my Satellite A210, is it possible to get replacements? Thanks

Answer:Need XP recovery disks for Satellite A210

Hello

Visit Toshiba page under https://backupmedia.toshiba.eu/landing.aspx
There you can order recovery discs. I don't know if you can order recovery for your Satellite A210 but you can check it anyway.

2 more replies
Relevance 84.46%

I have a Toshiba Satellite C50-A-19T laptop with OS windows 8.1

Recently my laptop had booting problems so i contacted toshiba support and they told me to get recovery disk from backupmedia.toshiba.eu and i ordered the disk and it arrived today#

When i enter the recovery disk and boot from the disk drive (ODD) it brings the windows logo then after a minute it goes to a blank screen and i waited and after a while it was still a blank screen
I had already went into the BIOS to change the settings to boot from the CD but even after that the same problem persists

Please help

Answer:Satellite C50-A-19T - recovery disks not working

Hi

Go to BIOS and disable the option called: secure boot
Now you should be able to boot from the ODD.

By the way: please check if the HDD is listed on the first BIOS page (name, size, etc?)
In case the HDD details are not visible, the HDD isn?t recognized by BIOS? this could be related to HDD malfunction.

1 more replies
Relevance 84.46%

Hi
I have a Toshiba Satellite A300- 1EG.

I created 2 recovey disks as required in the "Toshiba Recovey Disk Creator". I created the first one (Disk 1) 2 weeks ago and the second one (Disk 2) today because I didn't have 2 DVDs in hand.

My first question is does it matter if I have left a period of time between the two creations will if affect the recovery if I ever need to use them?

My second question is do both recovery disks just recover the operating system eg: Windows Vista or do they recover everything that was saved on Local Disk C at the time they were created?

My final question is if it happens my operating system dies, do I just power on the laptop and put in recovey disk 1 and then 2, (if that is not how I do it can someone please tell me how to?)

Regards

Answer:Satellite A300-1EG - Why do I need 2 recovery disks?

Hello

When you use ?Toshiba Recovery Disc Creator? you can see there option for using different empty medias. On some notebook the image can be burned on one empty DVD and on some models you need two of them. It depends on recovery image.

For my Satellite A300 I used two DVD-R medias. I have created recovery images for several notebooks and it is not known to me you have interrupt recovery creation and continue it later. When the first media is finished you must put second empty media and burning procedure will continue automatically. As far as I know there is NO option for disc 2 creation only. Please be careful about that.

I recommend you to obtain two empty DVD-R medias and create recovery DVDs at once.

When you use recovery DVD the whole HDD will be deleted, not just partition C. that means all data saved on HDD will be deleted. If your notebook has two HDD the recovery procedure will affect HDD1 only. Be careful about that and before you start recovery procedure back up all your important data.

Final answer to final question ;) ? when you want to install OS again using recovery media do follow:
Power your notebook ON and press F12 to enter boot options
Put recovery media 1 into optical disc drive
In boot options choose CD/DVD drive and press ENTER
Follow the menu on the screen

Of course, start with DVD1 and when asked insert second DVD.

4 more replies
Relevance 84.46%

Ok my first problem with my laptop was that I had about 5 Trojan viruses which passed through my antivirus some how =/

But now cause I rang up Toshiba line they said use recovery disks. I did not do the recovery disks because the disks would not go had to update firmware -.- did nott do that but he said ok press F8 on start up.

I did that HDD Recovery but it got stuck at 31 % and restarts. I load it up and it says BOOTMGR is missing press cntrl + alt + del to restart. I do that comes straight back to the same screen. I do it like 50 times nothing I can do.

I have searched the internet for the recovery disks download no help. I rang them up they said they cant system recover it -.- no idea what to do Any ideas?

Answer:Satellite L300D-13S - Need recovery disks

Hi!

I agree with the Toshiba hotline, you should use the recovery disk for this problem.

You can not download the recovery disks in the internet but you can buy a new one. Here is the link:
https://backupmedia.toshiba.eu

Bye

2 more replies
Relevance 83.64%

I have a Toshiba Satellite Pro A300 2CW. I bought it with Software Windows XP (included in a CD), which worked perfectly for years. I have reinstalled it several times during this years, but now the CD has deteriorated and it doesn't work anymore.

Originally the machine had WIndows Vista installed with DVD recovery creation option and a HDD recovery option, but I think this is not possible for Windows XP.

Do I have any options?Where could I buy the original Windows XP CD?

Thank you

Answer:Satellite Pro A300-2CW - Need Recovery disks with Windows XP

Hi

You can try to order it on https://backupmedia.toshiba.eu/landing.aspx
Other way you can install own WXP version. All WXP drivers, tools ad utilities can be downloaded from Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp

1 more replies
Relevance 83.64%

I recently bought a new notebook from Toshiba, the Satellite P300. It has Vista installed out of the box but there is no recovery media included with the package. I'm worried that if something might go wrong in the future, I won't be able to repair my operating system.

Two questions:
1) Is it normal that there is no recovery disc included with the Satellite P300? In other words, other customers who have bought the same laptop don't have this either. Or is this an exception and a mistake of my local vendor. In the manual on the 'included in this package' list there is no mention of a recovery disc included with the package.

2) Can I get a recovery disk from Toshiba if something goes wrong?

Answer:No recovery disks included with my Satellite P300

Hi

> Is it normal that there is no recovery disc included with the Satellite P300?
Yes, because the notebook was equipped with the HDD recovery option which allows you to recover the notebook from the HDD.

> Can I get a recovery disk from Toshiba if something goes wrong?
There is preinstalled Toshiba Recovery disk creator software.
This software creates a Toshiba recovery DVD. I think this info was published in the user manual which should be preinstalled on your notebook.

So I would strongly recommend reading the user manual and to create such recovery DVD before you would change anything on the notebook.

Cheers mate

2 more replies
Relevance 83.64%

The computer has a black screen with cursor in the middle not able to move. I have opted to do recovery disk but it is not doing anything still black screen with cursor in the middle of screen. I have backed up computer ages ago not worried about wiping it all off just want to restore to factory settings.
 

Answer:recovery disks for toshiba satellite a500

I have similar problem I got mine to boot from cd by removing hd.
didnt do much good didnt have anywhere to install so I tried repair computer
and put hd back in no good wont recognise hd can use cmg line that way though
hope someone has an answer
 

3 more replies
Relevance 83.64%

I have a Toshiba Satellite L350 which I bought some years ago

Originally it was a vista home premium laptop and I opted for the Toshiba windows 7 upgrade and its been pretty much trouble free .

However recently something went a bit weird and things just were not working well (it would not always log you out and never seemed to shutdown correctly) and various other applications did not run correctly.

After a few uninstalls ,reinstalls, scans and Microsoft patches did nothing I decided to take the plunge and use the recovery disk.

I had bought one from Toshiba when I got the machine originally and had made one myself before the upgrade to windows 7 and one again after.
I still have the windows 7 upgrade dvds so I can apply them after if I had to start back on vista again.

The only other big change has been a RAM upgrade to 4gb - I still have the original RAM if I need it but before all this there were no hardware issues reported and chkdsk was fine also.
So to me it was the o/s that was the problem.

I have now tried all the recovery disks and they all have the same problem reporting that imagex cannot uncompress the second file image as it is corrupt at block 90 ? I don?t have this actual message to hand
but can update later.


I can?t see that I?m doing anything wrong as all i do is put the dvd in the drive and restart the laptop with F12 to boot off the recovery DVD and follow the on screen commands.
Have you any reports of such of this p... Read more

Answer:Recovery disks not working for Satellite L350

Thats very strange that al recovery discs show the same error message. As far as I know when you start recovery image installation the HDD will be formatted, new partitions created, recovery image copied on second HDD partition and as last step is recovery image installation.
>I had bought one from Toshiba when I got the machine originally and had made one myself before the upgrade to windows 7...
Have you tested both of them in the past?

Generally speaking all you do is right. In my opinion the problem can be recovery image itself or maybe HDD has some failure on certain sectors.
If you can obtain second HDD somewhere exchange it, set BIOS to default settings and test recovery installation again.

5 more replies
Relevance 83.64%

Hi together,

I got a big problem. Win 7 Home Premium 64 BIT crashed on my satellite L550D-13V.

I tried to repair but it doesn't work. So I decided to recover via HDD Utility.
Everything seems to be okay but in the end the tool said that errors occured. I tried to recover again but the process aborted with bluescreen "PAGE_FAULT_IN_NONPAGED_AREA" this time.

After reboot system told me that no bootmgr is available. I tried to boot by using recovery disk but it also seems to be faulty because the system cannot not boot from the disks.

And there's my problem. I am unable to boot / recover now. Volume D seems to be okay - the HDD utility files are still available but I cannot create new recovery disks and it is not possible to boot into HDD utility tool.

Do you have any ideas?

Many thanks in advance and regards
Danny

Answer:Satellite L550D-13V - How to recover without recovery disks?

Hi

The story is strange?
I?m wondering why you are not able to boot from the Recovery disk?
Did you use the created recovery disk in the past or did you try this disk for the first time?

However, regarding the error message: PAGE_FAULT_IN_NONPAGED_AREA
I googled for that and it seems that this could be related to memory fault.
Possibly one of the modules malfunctions.

Of course this is just an personal opinion?

If an HDD folder is available on your HDD, then there is a small chance to get the HDD recovery to work. Here a interesting thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=40790

3 more replies
Relevance 83.64%

Does anyone know where (or if ) i can download the installation / Recovery CD's for the Toshiba Satellite Pro A200.

Cheers,

Answer:Satellite Pro A200 Where to download the Recovery Disks

The recovery CD cannot be downloaded!!!!
You have to order it from the ASP in your country if you have damage or lose it!!!!

But I really don?t understand why you ask this!!! Such questions are answered many times!!!! Check firstly the existing threads before you will ask something!!!


regards

2 more replies
Relevance 83.64%

Dear All

I wish to find out how many recovery disks my L300-1AQ (Model No PSLB8E) laptop requires.

I have a disk that I made when I bought the computer but I cannot start using it untill I make sure that only one disk is required (if more than one disk is required and I start the recovery process I believe I will render the computer unusable). I know that recent Toshibas come with multiple DVDs so it's definitely worth my checking before I do anything.

Oh and the recovery partition is gone due to an "aggressive" installation of linux, so that's not an option for us (it's new user is a windows user).

I cannot find this information on the internet or in the manual so I would be grateful if anyone out there has this information.

Best wishes to all

Answer:Satellite L300-1AQ - How many recovery disks required?

Hi DiodePrridge51b,

If Toshiba recovery disk creator required 1 disk only, you need only 1 recovery disk to restore factory settings.

It?s always depending on the notebook model and OS how much disks you need but if only 1 disk was required it?s enough and you start recovery installation. :)

3 more replies
Relevance 83.64%

I'm upgrading the hard drive of my *toshiba a300-1mz*, but I'd be sure that I can use the *recovery disks* maked at the first boots for the s.o. (vista)

I expect your support...
thank you very much...

Answer:Satellite A300-1mz Can I use the recovery disks after a HDD upgrade?

Hi

Yes, you can do this!
If the HDD has been recognized by BIOS then you should boot from Toshiba recovery disk in order to reinstall the OS which was preinstalled by Toshiba.

Greets

5 more replies
Relevance 83.64%

Have an Satellite Pro A300-28V laptop with Vista 32 Business. After a recovery from HDD Recovery partition I decided to use the function Complete PC system backup to make an image for future recovery with all my present settings. Too annoying to reset to factory default (Thunderbird 3.0 Mail, Open Office, and some other small applications previously running with no problems for years on another desktop computer).

The system needs 5 to 9 DVD's and it writes the first DVD. Takes roughly 30 minutes. Then, during verification of that disc it hangs. Verification bar stops at about 30% complete.
Anyone with that experience? Does not the Business "Complete PC image" work well on a OEM installation of Vista?
Or is it maybe the DVD driver who needs an update? I do not use a 3rd party burning software.

/Sweden

Answer:Satellite Pro A300-28V - Can't create own recovery disks

Hi

Which program you are using to create your own recovery disks? For example I mean Acronis, Norton Ghost, etc.

In your case I would try it with another burning program like CD Burner XP or Nero.
Furthermore you could try to remove the upper and lower filters in Windows registry, maybe it will work.

Last but not least on the Toshiba website you can check if there is a firmware update for your CD/DVD drive.

3 more replies
Relevance 83.64%

Hi

is there a way to make the recovery disks install win7 x32 instead of x64 (Satellite Pro C660-2JR)

Answer:Recovery disks creation for Satellite Pro C660-2JR

If your notebook was delivered with 64bit version you can create recovery disc for this preinstalled version only. With other words, recovery image saved on recovery partition will be saved on empty DVD disc. Nothing more than that.

If you want to use 32bit OS you must check if your notebook model is supported for it and install own version.

2 more replies
Relevance 83.64%

My Sat Pro A10 operated happily running a dual boot system (XP and Mandriva) before failing to start one day.
I successfully used the Toshiba recovery disks and all was OK for a year or so before the same fault recurred.

Now recovery disk Nr.1does not restores the system and the laptop switches off after appearing to function normally for about 20 seconds.

Restoring the MBR and reformatting using a Win 98 recovery floppy failed to solve the problem.

Does anyone have any ideas please?

Answer:Satellite Pro A10 recovery disks fail to reinstall Win XP

What exactly happens when Disc 1 fails? Read error?

Is the Disc scratched or dirty? You may need to order a replacement disc from Toshiba

3 more replies
Relevance 83.64%

Hi folks,

Posting this question for my neighbour as he now has no internet access as laptop not working - Satellite C660 running Win7.

When powering up he gets the Toshiba screen then a blank screen with cursor at the top left flashing.

Tried to boot from Win7 DVD (Pressed F12 to get to boot options & changed to DVD), can hear the drive trying to access the dvd but then get the message 'failed'. Win7 DVD works in both my laptop and desktop pc's.

Any ideas.

Thank you

Nigel

Answer:Satellite C660 Won't boot from HDD or recovery disks

> When powering up he gets the Toshiba screen then a blank screen with cursor at the top left flashing.

Possibly the HDD is dead.
You ca try to power up the unit and press F2
Now you should be able to access the BIOS.

If the HDD isn?t listed on the first BIOS page, then this means that HDD isn?t recognized by BIOS and this means that HDD is faulty.

7 more replies
Relevance 82.82%

Hi

I bought in June 08 a Toshiba Satellite P205D-S8804 on Ebay Australia and I now need to format system but cannot find my recovery disks that were provided with system.

Where can I order the necessary recovery disks from in Australia? Is there a number i can ring for products no longer under warranty?

Answer:Satellite P205D-S8804 - Need replacement recovery disks

Hi Eagle,

I don?t life in Australia so I don?t know how it works exactly but I would recommend contacting an authorized service provider in your country. The guys can order a new disk I think.

Furthermore if you have a Microsoft Windows disk you can reinstall Windows with this disk. You can download all drivers and tools on the Toshiba website.

4 more replies
Relevance 82.82%

Hi,

Is it possible to extract the OS from the recovery cd's that you make?

Answer:Re: Satellite A660 - Extract Windows 7 from recovery disks

Yes, it's possible but you won't get Windows 7 installation files but the image of the system just before the very first factory run. Anyway it could be useful on another Toshiba notebook replacing Vista.

2 more replies
Relevance 82.82%

I'm working on a Satellite A200, which doesn't have any recovery disks, and now seems to have a messed up Vista installation.
Before I started working on it, I created backup images of the Hard drives 3 partitions (C:\, TOSHIBA SYSTEM VOLUME & HDDRECOVERY) which I have saved on another computer.
My question is, can I create recovery disks from these images? The machine they are saved on triple boots XP, Vista & W7, they were created using ShadowProtect Desktop.
I can mount the images into either OS...

Answer:Satellite A200 - Burn recovery disks from HD image?

As far as I know it can be problematic now. Recovery media can be created when notebook has ?factory settings?. That means available "Toshiba Recovery Disc Creator" tool and recovery image placed on second partition.

When you move this recovery image somewhere else and put it back later it can happen that "Toshiba Recovery Disc Creator" cannot find the files anymore.

4 more replies
Relevance 82.82%

I have a Satellite L300 and have made a few sets of recovery disks as from what I read some makes work and some dont and so far none have.

Insert disk 1, press power on button and hold F12 down until the option for boot comes up.
Select CD/DVD then dos type box appears with X:\windows\system32\cmd.exe - startnet.cmd
and in the box Waiting for ODD to become available...

You can add as many dots after that as nothing proceeds further - hence three sets of recovery disks on three different brands of DVD any advice would be pleaseing!

brian

Answer:Re: Satellite L300 - Recovery disks made but wont run

Hi

According to your description, the system recovery procedure does not start up and the ODD cannot read the disk.

In your case I would recommend recover the notebook using the Toshiba HDD recovery.
You can start the procedure from HDD; press F8, choose repair my computer, Toshiba HDD recovery.
Now the system restore should proceeds?

After the notebook has been set to the factory settings, check if there is a firmware update for this ODD (CD/DVD drive). If yes -> update the firmware.
I know you have tried three different DVD brands but you should still try to create a recovery disk using another DVD disk? I?m using TDK DVD ?R and had good experience using it. A friend of mine uses Verbatim DVD?R and never had any problems?

5 more replies
Relevance 82.82%

My L350 has suffered a disk problem and would not boot. It attempted an automatic recovery but failed. I have rebooted from the system recovery cd's I created when the laptop was first purchased but the recovery fails at image 5.

Does anyone have any advice?

Answer:Satellite L350 will not boot or recover using the recovery disks

Have you used these recovery discs in the past?
If the discs are OK I can imagine there is some problem with HDD but I?m not 100% sure about that.

2 more replies
Relevance 82.82%

I recently purchased a Satellite Pro A300-13X notebook with Vista Business installed.
It came with two product recovery discs to install XP professional.

Since I decided just to use XP, I followed the procedure for product recovery and I am now running XP from the first disc. It seems to run properly.

I'm unable to install the second disc and wonder where it is for. It contains 7 application files 001-002-003-004 crc and tpa.

Does anyone know what to do with this disk?

Answer:Satellite Pro A300-13X: Question regarding the Product Recovery disks

Don't know what this disc contains or how to install it, but check if everything works and if all utilities and programs are installed, which you had under Windows Vista.

1 more replies
Relevance 82.82%

I was just wondering about this.
Could i make ISO images of my recovery disks, i know i could just make some more copies, but i am learning how to create ISO images.
But i was a bit worried what would happen when i put a disk in the drive.....

Answer:Re: Satellite L300-1BV - creating ISO images of your recovery disks

This with recovery image is a little bit complicated and something like this is not possible.
All you can do is to create recovery DVD using Toshiba recovery disc creator or start recovery from HDD directly using Toshiba recovery option (F8).

You can do with this what you want but how you want to start installation later?
Sorry but I think it will not work.

5 more replies
Relevance 82.82%

*Request for help*.

Following system crash 16 January have reinstalled Windows - as per my TOSHIBA Manual,
from the 2 supplied Recovery CDs - onto my Satellite 2450.

After watching the TOSHIBA & SYMANTEC 1.0.1.0 Recovery Utility screen show progress
over the course of 21 hours - inserting Disk 2 as per screen instruction along the way -
at the end I was left with blank screen apart from a C Drive Prompt.

I am uncertain as to the proper required action to continue the recovery.

REQUEST ADVICE correct procedure to complete the recovery.

Regards.




Using 1.4 Mb floppy StartUp disk can see that C: has what appears to be the XP folders.

- plus a folder, SYSPREP, which with another machine I see has contents shown below.

Volume in drive G has no label.
Volume Serial Number is 1724-0EEE

Directory of G:\SYSPREP

01/17/2003 07:40 AM <DIR> .
01/17/2003 07:40 AM <DIR> ..
08/29/2002 01:00 PM 16,384 SYS.EXE
08/29/2002 01:00 PM 27,357 CVTAREA.EXE
08/29/2002 01:00 PM 32,768 POWERCFG.EXE
09/20/2001 01:40 PM 588 WINBOM.000
02/25/2002 09:52 AM 153 SYSPREP.INF
08/29/2002 01:00 PM 112,640 SYSPREP.EXE
08/29/2002 01:00 PM 24,576 SETUPCL.EXE
08/29/2002 01:00 PM 50,055 OFORMAT (a COM file)
08/29/2002 01:00 PM 15,360 NETCFG.EXE
08/29/2002 01:00 PM 46,592 MSDINST.EXE
08/29/2002 01:00... Read more

Answer:Satellite 2450 Recovery Disks completed - Is there life after their use?

Just info. Finally cracked it and re-installed. Not clear why. Kept returning *Extraction Failed*. I kept running the recovery disks again, and again. The rate of progress seemed to increase on each attempt. Got to the *insert second disk and press Enter* bit. Did so, and on this occasion got message that the extraction failed due operator abort. Don't I just love this kit! Regardless ran again from scratch. When second disk requested I inserted it and confirmed done by pressing the letter *O* (For OK) rather than Enter. That ran through to 100% whereupon got a dialogue asking to remove the second disk and boot using Ctrl Alt Del.

It booted and brought up the Welcome screens. Could be in with half a chance. Thanks for input. zeds are calling.

2 more replies
Relevance 82.82%

I just restored my Windows Vista Home Premium 32 bit Operating System on my Toshiba Satellite L350-170 using the recovery discs I created 4 years ago when I first bought my laptop.

Having restored the OS, it has taken the best part of a day to install all the Microsoft updates, including Vista Service Pack 2, and other programmes I use (e.g. MS Office, Real player, AVG etc.).

Now everything is up to date, I have created a new system restore point on the hard drive and run the Toshiba Recovery Media Creator again. Just out of interest, will the recovery discs be created up to the last restore point, or will it just reproduce the discs I already have, which restore it to the factory settings?

If this only restores it to the factory settings, is there a way of creating a system disk to get it back to the point it's at now?

Answer:Do new recovery disks for Satellite L350-170 save updates?

Hi, no it doesn't work that way. Running Recovery will restore the HDD back to how you got it from the factory.

Message was edited by: RandyRoberts

2 more replies
Relevance 82.82%

i want to reformat my laptop, its a Satellite P300.... many things do not work anymore ie: system restore and corrupted c drive

1) would reformatting my laptop fix these problems?

2) 2 disks "product recovery media TOSHIBA satellite p300 etc and says windows vista ulimate 64 bit

Does that mean they contain vista? (vista came pre installed

3) should i make a copy of the vista serial PRODUCT ID that is on my system menu screen

4) how would i run these disks.....

I appreciate if you could help, its an awesome computer

Will reserach on how to run the disks, just wanting to make sure they contain vista

Answer:Satellite P300 - Does the product recovery disks contain Vista?

> 1) would reformatting my laptop fix these problems?
Probably yes

> 2) 2 disks "product recovery media TOSHIBA satellite p300 etc and says windows vista ultimate 64 bit
As far as I know P300 has been equipped with HDD recovery and the Vista 32bit was preinstalled. There should be an option which would helps to recover the notebook using the HDD recovery option. Press F8 while notebook booting up. Then choose Repair my Computer and start the HDD recovery.
This should set the machine to factory settings. Finally you could create a recovery disk using the preinstalled software called Toshiba recovery disk creator.

> 3) should i make a copy of the vista serial PRODUCT ID that is on my system menu screen
You could do this but as far as I know the Vista on the Toshiba Recovery disk is already activated and you don?t need any serial keys.

> 4) how would i run these disks.....
Usually you have to boot from such disk

PS; to get more details you should read the user manual and should read the threads in this forum!

2 more replies
Relevance 82.82%

A short question;
how to dual boot with the two recovery disks tath ive got with my laptop (Satellite Pro L40)

disks 1&2 are windows vista buisness
disks 3&4 are windows xp profesional
disk 5 is bios update

The guy where i bougt the computer (an ordinairy electroinic store named expert) said it was posible with tose disks.
I
I've already made a partition but when i boot the disks it doesnt has the option to select a partition

thanx already

Answer:Satellite Pro L40 - How to make a dual boot with two Recovery disks

>Satellite Pro L40 - How to make a dual boot with two Recovery disks?
Short answer: you cannot do this. Maybe if you have two HDDs (I didn?t tried this) but as far as I know your SP L40 has only one.
Ask this smart guy how to do this. Maybe he has some useful tip.

2 more replies
Relevance 82.82%

Hi,

I have a problem creating recovery disks for the Satellite L500-126.

I am using the Toshiba recovery disk creator.

The 1st disk is ok.
When I try to make the 2nd disk, the systems stops exactly at 50% of the 2nd disk. and no more reaction from the disk creator.

I tried 2x, and each time i had to abort and throw away the dvd's.

any suggestions?

Answer:Problem creating recovery disks for the Satellite L500-126

Hi

You should try another DVD from different manufacturers?
It?s nothing unusual that some DVDs are not fully compatible and that the CD/DVD drives cannot write the data properly?
I had such issue in the past and could solve this testing and using different DVDs.

2 more replies
Relevance 82.82%

Hi all,

I have a brand new Satellite M300-18P, pre installed with Vista 32bit. I would like to make rescue disks using the pre-installed Toshiba utility. Every time I try to burn a disk, the process stops halfway saying (and I have to translate this bit): "a problem has occurred in the power calibration area". code OEO1B5-26-00037304.

The program suggests the DVD-disk might be faulty, and urges to try another disk. After 3 disks, I do not believe this is the cause. I used DVD+r, normally compatible with the driver.
I want the recue disks since I want to format the hard disks and make a clean UBUNTU install. Might I decide not to use Ubuntu any longer, then I would like to install the original software back on the M300.

Can anybody help? Thank you. Kurt

Answer:Impossible to make recovery disks with my Satellite M300

Hello Kurt

I recommend you to use DVD-R media and just high quality product. Friends U400 is a little bit ?sensitive? with medias but I have used TDK DVD-R and it worked perfectly.

3 more replies
Relevance 82.82%

I have 3 recovery disks which were provided with my Toshiba (which was originally bought in the US for me by my brother although I am UK based). The laptop was originally running Windows XP Home Edition and Microsoft Works and is covered in Toshiba labels to that effect. When I try to restore the system using the recovery disks, the screen says it is installing Windows 95 ! Also, although It appears to be reformatting the hard drive, it only gets as far as 86% then stops ! (even if left overnight)

So I have two questions:

1) Can I get correct replacement start-up disks for XP?
2) Is there a likely reason for the 'lock-up' at 86%?

Answer:Satellite 2415 S205 Recovery disks do not work

Hey there

About getting correct discs, I think you can try here:

https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 82.82%

Hi,

I have a satellite 1800-400. The cd shows in device manager but it doesn't recognise the cd is in the drive. I need to use the recovery cdsas the system has been damaged virus etc. Is there a way i can get around the cd drive problem.

Thanks,

Hugh.

Answer:Satellite 1800-400: CD Rom wont work/ Cant use Recovery Disks

Hi,

you have to boot from recovery disk by pressing C or F12 at startup.

6 more replies
Relevance 82.41%

Hi, I have a just purchased the ThinkPad E550. I want to create recovery disks for the system. I have already upgraded the laptop to Windows 10 (system came with Windows 7). There is no OneKey Recovery icon that I can find, and I understand that this may not be available for anythign above Windows 7. How do I create the recovery disks? Thanks

Answer:How to create recovery disks for ThinkPad E550 with Windows 10 and no OneKey Recovery option

Hi srm17,
Welcome to Lenovo Community.
Does this help?  http://www.techradar.com/us/how-to/software/operating-systems/how-to-create-a-windows-10-recovery-di...

3 more replies
Relevance 82.41%

Hello, I've lost access to my Thinkpad because of lost password to Hard disk.Then purchased another HDD and installed OS and drivers. Getting few problems, one is that I cannot use ThinkVantage key to restore my system. But I have Rescue and Recovery Startup Disk & Product Recovery Disks, so can I recover my old HDD?If not possible to use the old, can I get back my system working[as factory default] with those disks? Thanks.

Answer:Thinkpad z60m: HDD password [But have Rescue and Recovery Startup Disk & Product Recovery Disks]

For second option, what will be the passwords of the recovered system: BIOS, HDD, Windows?

3 more replies
Relevance 82.41%

I installed Ubuntu GNU/Linux in my 3000 N100 0768GZQ laptop and deleted the partition in which i had installed Vista using fdisk. However, fdisk also deleted the Lenovo rescue and recovery partition. Not realizing this i created 2 new partitions in the free space. Now I want to install Vista in one of these partitions and I don't have a Lenovo Rescue and Recovery drive or the recovery CDs. Please help me.

Answer:Lost Lenovo Rescue and recovery partition in 3000 N100 0768GZQ have no recovery disks, please help

You can either get a hold of Vista installation disks and install it manually, or call Lenovo support and ask for recovery disks. They may charge you for the disks as you are supposed to create your own recovery disks.





\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

1 more replies
Relevance 82.41%

 I am doing a fresh install in the following rather than cloning because the system has not been reinstalled for 4yrs.  From an external usb CD drive (internal drive removed) I installed the recovery disks onto a 160GB Samsung HM160HC PATA drive with no problem .  Then clicked the restart button.  My T42 booted right back into the opening page of the Rescue and Recovery routine.  On restarting again I used F12 to get the list of drives and selected the Samsung HDD.  This did not help.  Have repeated startup numerous times.  The computer could not be looking at any other drive because the Samsung is the only one connected.  I am tempted to download Lenovo's available BIOS update while logged-in with the old 30GB drive regardless of the fact that my  Embedded Controller Program is ver 3.04 and supposed to be suitable for the 160GB drive upgrade.  If anyone has a suggestion please let me know.













Solved!

Go to Solution.

Answer:T42 HDD upgrade- Recovery disks install but hard drive only boots to Rescue and Recovery routine.

Welcome to the forum!
 
Wipe the hard drive clean.
 
Boot from the first (Rescue & Recovery CD) and follow the prompts. You'll have 7 more CDs to go through (5 for the earlier version).
 
Once the process is complete, the machine will instruct you to remove the final CD and reboot. At that point, you should be able to boot from the hard drive with no interaction required.
 
Good luck.

9 more replies
Relevance 82%

Hi, everyone.I'm quite sure I found this on-line and that it's doable, but now that I need it, of course I can't find it!My computer-illiterate sister has an eMachines Windows Vista computer that will no longer boot either normally or in safe mode; it hangs on crcdisk.sys.  She didn't make recovery disks when she got the computer, and the recovery console that comes up when it tries to boot also hangs.  She believes that it was interrupted while running a Windows update, but she's not entirely certain about that.  Anyway, her primary concern was recovering her pictures and documents, and I was able to do that by booting off a bootable Ubuntu CD.   Thus she now has everything she needs from that computer.  Before we take the sledgehammer to it, I want to fiddle with it and see whether I can get it booting into Windows off of the hard drive again so she can use it again, even if only for going on-line and not for saving precious stuff.I thought I read somewhere that if the recovery partition was readable (as it -- and the rest of the hard drive -- seem to be) that you could copy it up onto an external hard drive, then create recovery CD's on a different computer, but I can no longer find the instructions on how to do that.  Is that do-able, and if so, can I do it on an XP computer, or do I need to use a Win7 computer (I don't have a Vista computer).  Can I do it right off of the external hard drive, or d... Read more

More replies
Relevance 82%

Back to school for 4 children with laptops is a pain, I seem to be constantly wiping them and setting them up again.

Any ideas why the recovery disks of Vista don't display the TOSHIBA HDD Recovery option?

I made a USB drive and copied all the files from a backup of the Recvery Drive to it. The USB shows the TOSHIBA HDD Recovery option but asks for the disks and will not run the recovery from the USB itself. This is annoying but at least I can still use it to recover the machine.

I would like to either

solve the issue with the disks

or

get the USB to recover using it's own files instead of asking for the disks. Vista wasn't created with the option to recover from USB so this might be impossible.

Answer:Vista Recovery disks don't display TOSHIBA HDD Recovery option

The HDD recovery option will not appear in the Advanced boot menu if something has been changed or modified on the HDD and the ?flag? has been removed.
For example this may be the case if the partition has been changed, modified or if the HDD recovery files or folder has been modified, moved or deleted.

In case you want to recover the notebook back to factory settings, you have to use the recovery disk

4 more replies
Relevance 82%

Hi all Would need some help for the OKR. Currently using Y450 Situation :System came with 3 partitions, Large C: , Small D: , Service Partition [Pre-installed Vista]Copied whole service partition out onto a external HDD. Formatted Main HDD partitions without touching the service partition, then installed XP on my systemAfter the XP installation, C: Drive is my "Service Partiton" and i can see ALL files which is supposed to be hidden (don't ask me why, I don't know -.-)D: Drive is my XP System files and everything else (1 HUGE partition 480GB). So right now, when i try to create recovery disks selecting the file on myC: Drive "Service Partition" factory.wsi file, i keep hitting this error : OneKey RecoveryFail:  error code 0xE0DD001FAn internal program error has occured.  Also, my Optical Drive also seems to die off after hitting this error, I can't eject, read, anything at all! I have to restart the whole System to get it to work again, its as if the power to the optical drive just died.   I have applied all the possible updates/patches for OKR, still nothing works. How can i fix this?   

Answer:Onekey Recovery error tring to burn Recovery Disks

1) You can't just copy the entire partition and expect the recovery process to work...2) You now cannot create your recovery disks because you have a) changed the partitions b) have removed the ability for the OKR partition to function.3) The only option you have now is to send your computer into the Depot and have them reimage your HDD... Also, while you are talking to them, ask them how to create a proper set of recovery disks through a backup and ask if they have Recovery disks they can send you... if they are available.

1 more replies
Relevance 82%

im trying to restore my computer back to factory settings, but im getting a could not enumerate error message. i have a toshiba satelitte model a215 s7462 model working with vista 32-bit
 

Answer:recovery disks problems

hello J_B

see if this helps. toshiba is the 7th one down. http://www.techsupportforum.com/har...port/162525-laptop-recovery-instructions.html

good luck
 

1 more replies
Relevance 81.59%

Hi

Can anyone help please?

I own a Satellite L350-20F running Vista
After suffering a blow to the laptop it stopped working. (no surprise)
Have used recovery disks to try to restore unit, but nothing happens it just reboots to the running ants with microsoft corporation written underneath, then check disk starts reporting no bad sectors, after this fins it reboots to running ants again.

Am getting blue screen error message every now and again, then goes to windows recover screen to either launch startup reapir (done this lots times still no progress) or start windows normally.
Tried to repair but just keep going through the stages of putting disks in and going through disk repair.

Is it easy to change HDD inside (i know how to on PC but no clue in laptop)(out of warranty))
I also own a satellite L300-25H is it poss to network them together and do a full format of broken one to see if that helps?
The only thing is will i be able to reformat new HDD with recovery disks to put back on Vista or will i need to pay out for a new OS?

Many Thanks

Si

Answer:Satellite L350-20F - Recovery Disks work to a certain point, still no boot

Yes it is easy to replace the HDD, just unscrew the two screws in the HDD Panel on the Base.

If there is a HDD chassis/bracket on the drive, you will need to transfer the bracket to the new HDD.

If you have no Recovery Discs, you can order the discs from the Toshiba website for a small fee.

2 more replies
Relevance 81.59%

I have a Toshiba Satellite A55-S1065 that I recently replaced the harddrive in, and when I try to use the recovery disks it keeps failing at various points with the A:/ghost error, even though this machine doesn't have a A drive

I really need help can anyone?

Answer:Satellite A55-S106 A:/ghost error when using recovery disks to reinstall OS

Apparently from my research into this problem on all of that years toshiba recovery disks they are set to automatically try and find a floppy drive, even when there isn't one.
I've copied the recovery disk onto a new disk, still dosen't work.

I've reinstalled the harddrive to make sure the connection is good.
I don't have another windows disk to try, does anyone have any advice for me?
It's very strange.

Can anyone help?

2 more replies
Relevance 81.59%

Hello!

I have a Toshiba Satellite L300-139 (Vista, 160GG, 2GB memory).

Hard disk has been damaged (when booting Vista, systems does not start at all, and every time only a blank screen with the mouse arrow is shown --> tried all choices + PE boot etc. but there is no access to the Recovery Console) and there is no possibility to run CHKDSK to fix this problem.

No recovery disks were created when the computer was new.

I removed the laptop hard disk and plugged it in to my desktop computer, but 2 partitions out of 3 were damaged and I managed to recover some data including:

c:\program files\TOSHIBA
d:\HDDRecovery

Recovery of the data was done by using www.sysresccd.org and external USB hard disk.

I copied all the data to the USB disk and started the TRORDCLauncher program (run as Administrator). All it does it removes my DVD-drive from vista and then fails with error (rough translation):
"Other process is using the drive or there is no drives available. Check the drive status. [OK]"

It seems that Recovery Images have been created with Windows PE Tools 2.0 (Imagex), but as the data is spreaded around the folders I have not been able to create the recovery disks manually.

Any Ideas and knowledge how to create the recovery disks with this data what I have or do I have to order the DVD's and wait for couple of weeks before getting the system up again?

Thanks!

-L

ps.
If someone knows a nice solution for executing Microsoft CHKDS... Read more

Answer:Creating Recovery disks without the possibility to boot -Satellite L300

Sorry but there is no chance you can create recovery DVD. Recovery DVD can be created if you use ?Toshiba Recovery creator? tool only and unfortunately there is no way to get it.

HDD recovery procedure using F8 can work only if the HDD configuration is not changed (new OS installed), the HDD recovery folder must be placed on second partition.
So with short words, you can do this just if the notebook has ?factory settings?. Now you cannot do anything but order new original recovery DVD for this notebook model.

If you want to do this you can order it under https://backupmedia.toshiba.eu/landing.aspx

Bye

1 more replies
Relevance 81.59%

 I have gone to restore my laptop to Factory setting but in the rescue and recovery application i do not have any option to recover to the laptop as it came out the factory. When i got the laptop i created rescue media and have a set of 4 disks, All DVD(2 are 8.5GB). The R&R  boots and asks for the Final C disk. None of the disks display in the backup listbox. Before i went for a fresh install using a Windows 7 disk, i got R&R to off load media to a portable drive. This will boot to a different version of R&R similar to the post 2008 walkthrough. But the screen i get does not have the radio button for Factory restore, just the backup and when i put my DVD's in, no backup is found from the media i have... I removed the factory partition after i created the media as i presumed i could get back to the factory using them. My fresh install of windows 7 works but downloading the wireless driver from Lenovo doesn't activate... wish i never started to mess with it now.... Any suggestions???













Solved!

Go to Solution.

Answer:Edge 525 & Rescue & Recovery & No recovery Partition But Disks

Update: All Restored and Working again... Must label the Disks better in the future... I had 4 disks in a bundle, the first being the Rescue repair disk, which boots to a similar screen. As 1 of my disks didn't do anything in the various rescue and recovery application i used from previous thinkpads. Turned out this was bootable and the proper rescue and recovery for my set of disks... cdrivebackup.swm took ages to load and then asked for the second disk. Processed and now 1 working system again... now to move all the data back...

1 more replies
Relevance 81.59%

If I use the recovery disks (3) and the driver and application disk to re-install Windows 7 on my Acer Aspire 7740-5691 will the recovery partition be restored. The recovery partition is 11.72 GB and is 100% free space and healthy according to information in disk management. I am not sure how the recovery partition got wiped but the computer is up and running at this time. The disks were made when I purchased this computer about 5 years ago. The hard drive is 320 GB, processor is intel i3 quad core, ram is 4GB. Thank you in advance for your comments and information. Oscar1













Solved!

Go to Solution.

Answer:Do Recovery Disks restore Recovery Partition, Aspi...

Acer erecovery media will restore your laptop to factory default, so, yes it will restore the original recovery partition too.

4 more replies
Relevance 81.59%

I have a M92p SFF that I am trying to create the recovery set for. I have created the boot disk using a cd-r. I inserted a dvd-r for the first of the recovery disks and I get this message: "This disk cannot be DVDRAM, please select another recordable media type supported by the selected drive and try again." I click OK and it returns to the menu where the process begins.

More replies
Relevance 81.59%

My Laptop came preloaded with Windows 7 Home Premium and I would like to create system recovery disks. I have a drive labeled RECOVERY (D. How do I create recovery disks from this drive?

Answer:Need to create system recovery disks from RECOVERY (D:) drive

We know nothing about your laptop, so it's hard to say. Who made it?? What model?

You probably have to access some program, either from a choice in your list of programs or through a particular keystroke during the boot process. Look in your list of available programs for something related to recovery or consult your manual.

9 more replies
Relevance 81.59%

I put in a new harddrive but I do not have the original recovery cd's. I want to reinstall Windows XP and enter my original Windows Key - will the Rescue and RecoveryŽ 4.21 download give me everything I need - or is there something else that goes with it? I didn't see any mention of reinstallation of Windows XP - only other suppoprt and diagnostic software.Thanks for your help - the amount of information on these computers is overwelming! Scott 

Answer:Recovery and Reinstall Windows XP - A52-8168 - Need Recovery Disks.

do you have the original HDD you have to burn the recovery cds from a service partition that comes on the HDD you can also use microsoft win. xp disc but I don't think your OEM key will work with that http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-70804 you can also search online....ebay





_______________________________Thinkpad R61 7733-1GUThinkpad X61T 7762-54UThinkpad X60T 6363-4GU_______________________________Did a member help you today? Thank them with a Kudo!If a post answers your question, please mark it as an "Accepted Solution"!Regards,GMAC

3 more replies
Relevance 81.59%

The 500 GB Samsung Hard Drive on my HP Pavilion a6500f PC running on Windows Vista Home Premium (64-bit) crashed. I bought and installed a new 500 GB Western Digital Caviar Blue model WD5000AAKS hard drive on the PC. I ordered recovery disks from HP using the computer's serial number and confirmed that the Build ID on the recovery CDs and the sticker on my computer match. However when I attempt to recover the system Windows loads the recovery files and then I get the error:

"This PC is not supported by the system recovery discs. You will not be able to recover this system with these discs."

I have tried 2 sets of recovery discs from hp and get the same error. I have attempted to use the Cyberlink Recovery Disk Utility from hp http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&lc=en&dlc=en but it fails. This Utility only supports Windows 7 per the hp page.

I would appreciate any help on how to move forward. I am new to this site so if I broke any rules please feel free to correct me. Thanks.

NYATI

Answer:System Recovery Fails with hp Supplied Recovery Disks

How much did you pay for your recovery discs and is it refundable? If you the recovery disc costs more then $100, you would be better off purchasing a copy of Windows 7 which is far more stable and a less of a memory hog.

8 more replies
Relevance 81.59%

doing a factory disk recovery vista business 0n lenovo 6072 bvu thing centre windows comes up tofinish after finishing state shutdown load custom startup shuts down restarts the bar with moving lines appears the screen goes blank can hear startup sound the computer goes in like a sleep modeif you shut down the computer it restarts with not properly shut down restart normal safe mode network mode press normal does the samething and goes in sleep mode again is there normal startup and acustom startup if so how do you fixit

Answer:recovery lenovo 6072bvu withfactory recovery disks

'Startup sounds' as in the windows music or 'startup sounds' as in you hear fans and drives spinning up? If the former then you've got some kind of video problem. Try booting to safe mode. If it loads to the desktop set resolution to 800 x 600 and reboot to normal mode. Then try setting a higher resolution if desired.If the latter, well it still sounds like video. Do you have both an on-board video port and an added card? If so try both.

2 more replies
Relevance 81.18%

I had an issue (blue screen) with my T42 and decided to return my system to the orginal configuration using the recovery disks.  I've been able to load the disks, however, the problem is that after completing and rebooting, the system goes back to the Rescue and Recovery screen and not Lotus window.  Rescue and Recovery must be on my hard drive because I had removed all disks from my disc drive.  Anyone know how I can get back the windows screen?Vic

Answer:Problems with using recovery disks on my T42 upon reboot

See here. Don

4 more replies
Relevance 80.77%

Hello,

My pc start acting up after i made a system restore.For exemple i cant use the fn key function.

Last week i decided to format my pc. But when i opened the TOSHIBA Recovery Disc Creator i got an unespected error 0D00F6-49-00000001.

I mananged to create 2 of the 4 dvd's. Im using Dvd-r from memorex.
Can someone help.

Thank you in advance for your help.

Answer:Satellite L500 - cannot create recovery disks - 0D00F6-49-00000001 error

Is this the first time you try to create recovery discs?

How you have created 2 discs if the Toshiba recovery disc creator starts with error?

Anyway, in this forum you can find similar threads. Probably is some recovery file corrupted and disc cannot be created.
I don?t think there is something you can do about it. Either it works or not. Maybe you should contact nearest Toshiba service and explain the situation. I hope they can help you with this and order original Toshiba DVD disc for you.

2 more replies
Relevance 80.77%

I?m trying to do a clean OS install of Vista onto a new hard drive, the install runs correctly but at the end, instead of it requesting me to create a user id and password as the machine does at first boot up when new, it shows a login for administrator with a message that the administrator account has been disabled, and another to input a pre-existing user name and password, which I do not have since this is a clean install.

Does Toshiba want me to only run the recovery on top of a pre-existing OS install? That would be quite a limitation, and would prevent one from recovering their machine after a hard drive dies.
Any thoughts? I did look thru the docs for a default password, but if it's there I didn't find it.

Thanks in advance!

Answer:Re: Satellite U305-S7477 - issue with clean install from recovery disks

Hello

To be honest your issue is strange to me. The fact is, for operating system installation you can use either Microsoft installations DVD or Toshiba recovery DVD. In both cases when installation is almost done you must enter your username and password (optional). There is no difference at all.

I have done recovery installation many times under WXP and Vista. No difference at all. Username must be entered always and I didn?t notice such issue as described in your posting.

So please try to install OS again and be careful with each installations step. All recovery installations images are tested and I cannot imagine Toshiba?s people can oversight something like this.

2 more replies
Relevance 80.36%

Hi sry, for my english in the 1st place. Now the problem:

I have a Compaq Presario Notebook, V6000 adquired in 2006 with windows XP media center edition, I used a few times the recovery disks and all was ok, at more or less 6 months I upgraded the BIOS at recomendation of HP/Compaq because of issues with the model in question (loads of problems more than the ones they admit) so I upgraded it, and less than a weak after I tried the windows 7 Beta release edition, till 2 days ago, I put the recovery disks to downgrade and well, the problem appeared, I got this message: This Recovery Volumes don't support this model of PC I looked in the dxdiag and for my surprise my laptop is not more an Compaq Presario, but an HP MCP51M, and in the BIOS in Notebook Model is nothing, blank, for what I see the disks check the model of the laptop, and the right info is not there, any help??
 

Answer:Problems using recovery disks to reinstal windows Xp

I have seen this before, not sure you can do anything to solve it, the recovery discs look at the bios, and see that field is blank, and halts the recovery process. I had this same issue on a HP DV6000, never found a solution.

.
 

1 more replies
Relevance 79.95%

Hello,

just bought a satellite A505-S6005 and trying to create recovery disks.
I am using Dynex DVD-R.

It created the 1st disk after erroring out 2 times and when I started the 2nd disk kept getting the message again which is Error Code OE01BS-26-2A037303 says power calibration area error occurred, check disk for dirt or scratches.

The disks are not scratched and after going through 5-6 disks am wondering if something is wrong with the optical drive & not the disks.

Any help appreciated.
Thanks.

Answer:Satellite A505-S6005: power calibration error creating recovery disks

Hi

I think it?s a problem with your DVD medias?
You are using not compatible disks!!!

Try different DVDs from different manufacturers.
I?m use the Verbatim or TDK DVD-R and my CD/DVD drive handles these disks trouble free.

Check it!!! I?m sure this will help you!!!

3 more replies
Relevance 79.95%

Hi There I did a clean install of my T510 with Windows 7 64bit. I didn't create recovery disks prior to doing this, however I still have the recovery partition. How do I go about creating the recovery disks and/or how would I go about recovering to factory defaults now from the recovery partition? ThanksNeal

More replies
Relevance 79.95%

I'll be upgrading my T520 from Windows 7 to Windows 8 (clean install) and want to create a full, restorable backup of my system first. I'm confused about just which method to go with.  In Control panel, there is a "Lenovo-Factory recovery disks".  And then there is also Rescue & Recovery, which I just installed.  From the online instructions, it looks like with R&R, I can select either the OS and/or Data.  If I select OS, is this the same as running the Control panel item, Factory recovery disks?? I will probably create the OS backup media separate from the Data media anyway, since I want to copy the data over to my clean install of Windows 8. Thanks!

Answer:Use "Factory recovery disks" or "Rescue & recovery"?

The Recovery Disks are a must have do burn them to DVD's (3 - DVD are burnt). These 3 DVD allow you to reinstall the the Windows 7, tools drivers etc to the state it came from the factory. It becomes clean start as you originally got it. They maybe also used to boot into for the repair console but I am not certain as I haven't tried it myself. Now having said that which should be clear. You want an IMAGE of the DRIVE which includes 3 partitions. One is no good since Lenovo boots via Rapidstart via "System_Drv" partition. If you look in Disk Management you'll see that is the active boot partition. You need it and the Windows partitions a minimum. But that leave the Q drive omitted. Few people take into account that even though they have a backup of the HD they DON'T have the means to read it to put it back. Its fine if you just going to over write a working system from the backup but not it the application or tools are missing. Acronis Trueimage is OS independent and allow for a Boot CD to be made for those situation in which you can restore a HD, a partition or even folder and files from the same backup. This is what you'd want or something equivalent and 100% that you'll have access to it afterwards. I doubt you'd be able to easily do all this will R&R  and there is no way to verify that in advance. Many time the backup is no good and you're SOL. Trueimage can verify the image file created that its good if you which so you know. You can create as many imag... Read more

5 more replies
Relevance 79.95%

The recovery partition on my laptop was deleted so I obtained the Recovery Media Disks from HP for my laptop.  The laptop does not have a CD/DVD drive.  How do I go about creating the Recovery Media on a USB flash drive? -Does it have to be done on the laptop that I want to recover, or can I create the USB Recovery drive on a different PC Thanks,Mark

Answer:Create USB Recovery Media from Recovery disks

Hi, My suggestion: try an external Optical drive or send it back and ask for USB key/flash drive because DVD and USB do not have same structure. I don't know ripping DVD to ISO file work or not but you may want to try. Regards.

3 more replies
Relevance 79.95%

Hello,I have a T430s. My original hard drive is dying so I got a new one. Before swapping the hard drives, I created the factory recovery disks (1 "boot media" + 3 "data media"). After installing the new hard drive, I boot with the first DVD (the "boot media") and it only goes to the system image option. It tells me to insert the last DVD of the system image, but obviously I have the factory recovery disks, not a system image disk. So it doesn't recognize any of the three data DVDs as the "last DVD". There is no factory recovery option, it only goes to the system image option. How can I restore to factory settings with my DVDs on my new hard drive? Do I have to use a CD/DVD to boot into R&R somehow, and if so, how? Thanks! 

Answer:T430s Recovery with Factory Recovery Disks

Hello,I have a T430s. My original hard drive is dying so I got a new one. Before swapping the hard drives, I created the factory recovery disks (1 "boot media" + 3 "data media"). After installing the new hard drive, I boot with the first DVD (the "boot media") and it only goes to the system image option. It tells me to insert the last DVD of the system image, but obviously I have the factory recovery disks, not a system image disk. So it doesn't recognize any of the three data DVDs as the "last DVD". There is no factory recovery option, it only goes to the system image option. How can I restore to factory settings with my DVDs on my new hard drive? Do I have to use a CD/DVD to boot into R&R somehow, and if so, how? Thanks!

1 more replies
Relevance 77.08%

Hi everybody!
I have HP Desktop with Windows 7 Home Premium.

When I was using Vista there was a difference between using recovery partition on the hard drive to restore Windows and Recovery disks that you create yourself.

The Recovery Partition one would only restore your computer to it's shipping condition - meaning that if I had partitioned the drive and had Windows partition separately from my other files it will erase all of it and get rid of that new partition of mine along with all my files.

If I used the disks - it will give me an option of shipping condition OR just to reinstall Windows partition of my drive so all other files are not erased.

In Windows 7 the created disks give me only one choice - Factory System Reset. Does it mean that it will erase it ALL or just the Windows partition?

I really don't want to back up 300GB of my data... just need the Windows partition erased and reinstalled. Will Recovery Disks do that or is there any other option for doing it with Windows 7?

Answer:Recovery Disks or Recovery Partition

I would not run the Recovery Disks without backing up data. It doesn't sound like they will let you choose where to install Win7.

You can always borrow or locate a clean retail copy of your version Win7 to clean install with Product Key on your COA sticker on machine. Many tech enthusiasts do this to avoid the bloatware and useless factory utilities. Let us know if you want more information on this.

You can also make your own Win7 Backup image saved externally so you never have to reinstall or recover again, just reimage from the saved file. Backup Complete Computer - Create an Image Backup

6 more replies
Relevance 77.08%

When viewing Disk Management, there are two RECOVERY D: disks. They have the exact information with the exception of one having an NTSF file system. I get error messages that backups are failing due to insufficient space. I attempted to change backups to a network location and outwardly it appeared to have been successful but still getting the errors. I'm hesitant to screw around with anything on the D drive(s). I have no idea if this was introduced when I upgraded to Windows 10 or if it's always been that way (on Windows 8.0). Any inputs would be greatly appreciated. Thank you! Dennis

Answer:Two Recovery (D:) Recovery Disks with the same information

I went through this before with a poster over at eight forums...

There is only one D partition - but because it is a HP Bootable partition
Disk management sees the drive as recovery and bootable..

the give away is the Two other Recovery Partitions and the fact that the partition is assigned D by disk management

D contains your HP Factory Recovery Image..

4 more replies
Relevance 77.08%

When viewing Disk Management, there are two RECOVERY D: disks. They have the exact information with the exception of one having an NTSF file system. I get error messages that backups are failing due to insufficient space. I attempted to change backups to a network location and outwardly it appeared to have been successful but still getting the errors. I'm hesitant to screw around with anything on the D drive(s). I have no idea if this was introduced when I upgraded to Windows 10 or if it's always been that way (on Windows 8.0). Any inputs would be greatly appreciated. Thank you! Dennis

Answer:Two Recovery (D:) Recovery Disks with the same information

I went through this before with a poster over at eight forums...

There is only one D partition - but because it is a HP Bootable partition
Disk management sees the drive as recovery and bootable..

the give away is the Two other Recovery Partitions and the fact that the partition is assigned D by disk management

D contains your HP Factory Recovery Image..

5 more replies
Relevance 77.08%

Dear all,
 
I have searched the KB for a solution but can't find one for One Key V8 - how can I create recovery CDs/DVD's?
 
Many thanks,
Ian
 
Moderator Note; subject edited

Answer:G50-70 One Key Recovery 8 - How to create Recovery Disks?

No-one has ever had this problem before? Makes me special then :-)Any Lenovo support read these threads?

5 more replies
Relevance 75.85%

Lenovo'ers I just got my ThinkPad a week ago. It could not complete its Windows Updates, seems there was corruption in the Windows Update registry (google 'windows update error 643', seems to be common). I tried a few Microsoft support tools to correct it, but in the end I was wasting too much time so decided to restore my laptop to factory state. I went to the ThinkPad tools from the Start Menu, where there was a tool to create system restore disks. I went through that process, and created "Boot" and "Data" recovery disks. I rebooted my laptop with the boot DVD, and it started the recovery. I opted to do a full factory reset. It started going through the process, but then stopped and asked  for the "Application and Drivers Disk 1". What? The disk creation process only produced a "Boot" and "Data" disk. I tried using the Data disk for Disk #1, and was relieved when that worked. Sadly, the process continued until it stopped again and asks for Application and Driver disk #2. Sadly, the 'Data' disk  does not work for this, and the restore process refuses to continue. I am stuck. My machine is now in a completely unusable state. The original parition has been wiped out, and the OS is not installed. Two questions: 1) what is wrong with the recovery process? Seems like a major problem with the tool producing 'Boot' and 'Data' disks, while the reinstaler expects different disks. How can this be?2) how can I restore my machine to factory s... Read more

Answer:T530 Recovery Process Broken, I have Boot and Data disks not Application and Drivers disks 1 and 2

Hello and welcome,
 
Sorry to hear about this
 
Your recovery partition is probably already wiped out by the aborted restore, but what happens if you press the "Think" button during boot?  (or whatever it's called these days)  That might have given you a factory restore option _before_ you tried the DVDs.
 
Failing that, give support a call and explain the situation.  They can send you a DVD set.  They normally charge for these, but in a situation like yours they are often provided free.  I can't speak for Lenovo - that's just my personal experience.
 

United States
THINK-branded products
English
1-800-426-7378
24 hours/day7 days/week

 
Z.

2 more replies
Relevance 75.44%

i have had to replace my hardrive on my tablet now only to discover. I can no longer use the tablet as i don't have the nesecary software or drivers. I have been on Toshiba web site but can not find what I am looking for. I am now using Win xp media center on it.

I have also tried Win Xp and downloading the drivers but do not work. Can anyone tell me where to get the recovery disks and tablet editon for this laptop?

thanks

Answer:Portege M200: recovery disks and Win Xp tablet disks needed

Hello ez

Contact Authorized Toshiba service partner in your country. They can order for you original recovery media. The installation is very easy and everything will be work perfectly again.

Bye

5 more replies
Relevance 75.44%

I'm selling my laptop and there are a few people interested in it. The thing is, I no longer have the recovery disks for Windows XP nor do I have my Microsoft Office 2007 CD or the Adobe Photoshop CS3 CD. I had them for a while and lost them when I moved to college. The potential buyers are interested in my laptop because I have Microsoft Office Home and Student 2007 as well as Adobe Photoshop CS3. So if I do a complete wipe with DBAN, it will wipe my entire HD clean, correct? Is it possible to wipe certain parts of the hard drive and not others?Is there a way for me to sell my laptop while keeping Microsoft Office Home and Student 2007 and Photoshop on there without compromising my security? I can't reformat or wipe my whole laptop due to missing recovery disks. I know simply deleting everything isn't "safe" but is that enough? Any help would be much appreciated. Thanks.

Answer:Help! Selling Laptop But Missing Recovery Disks and Software Disks

 1 You can wipe the drive [totally] with software. 2 or you can buy a Windows cd & format the drive, this is not a foolproof wipe like #1. I dont know how important is is to you?

5 more replies
Relevance 73.39%

Hello all, I have a Satellite L675. In the recovery wizard, there is an option for "Erasing the internal hard drive". According to the user manual, I am given the following warning: "Erasing the internal storage drive will delete all data on the drive, including the partitions",

Will this recovery wizard option actually delete the hidden recovery partitions (sda1 and sda3), wiping the entire hard drive, or just the user-created partitions (sda2, AKA C

Thanks for clarification on this.

More replies
Relevance 73.39%

Had to use Recovery disc recently only to discover, too late, that I had lost the two media creator discs to completer the reboot.

Can't find them on the basic home page - help!

Answer:Satellite C650 - Cannot find recovery discs to perform full recovery

Recovery disk cannot be downloaded.
You can order it for a small fee.
http://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 73.39%

Hello,

I have a Satellite L670 PSK3EE-xxxxx

When I launch Toshiba Recovery Media Creator I have two errors :
Unxcepted error, please close the app and relaunch :

0D00F6-49-00000015
0D0172-49-00000015

Then it displays the soft and ask for 3 DVD...
Any idea why ?
Where Could I download a new version of Toshiba Recovery Media Creator ?

Thanks by advance

Answer:Satellite L670 PSK3EE - Recovery Recovery Media Creator ERRORS

Toshiba recover creator asks for 3 DVDs because three empty DVDs are needed in order to create an Recover Disk!

PS: I found Toshiba Recover Media Creator for download on this Toshiba Australian page:
http://www.mytoshiba.com.au/support/computers/satellite/l670/psk3ea-055017/download?os=25

2 more replies
Relevance 73.39%

Hi,

I have a Satellite U400 (few years old), and I never created the recovery DVD.
Now I want to do it, but for some reasons, when I launch Toshiba recovery disc creator, nothing happens...
The partition with the recovery files is there, as well as the folder HDDRecovery. I did add some files to this partition, could this be the problem ?

Thanks for your help.

Answer:Satellite U400 Impossible to create recovery DVD with Recovery disc creator

>I did add some files to this partition, could this be the problem ?
No. if you didn?t change partitions structure this should not be the problem.

Question is: does Toshiba recovery disc creator start or not? If you cannot star this tool it has nothing to do with recovery files.
Can you find this file - C:\Program Files\Toshiba\TOSHIBA Recovery Disc Creator\TRORDCLauncher.exe ?

4 more replies
Relevance 73.39%

Hi.
I just buy a new Satellite L50-A-161 with 6 Gb Ram.
When i try to create the recovery disks (3 of 4.7Gb DVD) with Recovery Media, during the verify, after writing the first disk, I receive this error message:

Cannot read file:
D: \EFI \ microsoft \boot \bcd
(error code: 02014F - 20-00000000)

and the process stops.

Is there anyone thath can help me?

These are the spec of my notobook:
Satelliete L50-A-161, 6 GB Ram, Intel Core I7 3630QM-2,40GHz,NVIDIA GEFORCE GT740M 2GB RAM, S.O. W8 64bit.
Ask for more, if nedds.

Thanks

Answer:Satellite L50-A-161 - Recovery Media fails in creat recovery disk

Hmmmm.... there must be some problem with recovery image.
When you open recover disc creator and if there is option for USB media creation please test it.

Maybe you will be able to create recovery USB stick.

2 more replies
Relevance 73.39%

Hello, I've used the recovery media creator to create a USB flash drive recovery media.

If i then use that to restore the Windows 7 installation onto a new hard drive (as SSD) will that drive itself have the recovery media partition on it?

So if I then lose the USB stick could I restore again by holding down zero when powering on?

Or does it recover the Windows partition and nothing more?

Thank you

More replies
Relevance 73.39%

I recently bought a Satellite Pro L850-1UJ with Windows 8
http://www.toshiba.co.uk/laptops/satellite-pro/l850/satellite-pro-l850-1uj/

I've created a new partition (so i could use it as data room)
i.e. C: the windows system AND Z: my data

after that, i could NOT use the RECOVERY MEDIA CREATOR to create the recovery dvds
BUT the partition still exists and i can see the inside files from windows

IS IT a way to extract the files from the recovery partition or any other clue how i could fix the partition scheme so the RECOVERY MEDIA CREATOR could recognize it


Many thanks for your time...

Answer:Satellite Pro L850-1UJ: How create recovery DVDs from recovery partition

After changing HDD partitions structure it happens that ?Toshiba recovery media creator? cannot find recovery files. These files are marked with special markers that in your case cannot be found anymore.

I?m afraid now is too late to do or change anything. You are not the first one with this problem. We always write here that first step should be recovery media creation and later you can do whatever you want. You can even delete it.

Now you can just order new recovery disc at https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 73.39%

Talk about confusing. Does anyone know how to get a Toshiba C660 working after the HDD has failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will the recovery disk ( if you purchase one from Toshiba ) rebuild the new HDD along with a new recovery partition and install windows 7 (original OS ) and accept the product key printed on the Windows License attached to the base of the laptop. I have read a number of suggestions but these have been deemed incorrect by others.

Surely Toshiba must have a way of sorting this problem.

Do they read these posts ?

Answer:Satellite L660-12Q - Would recovery disk rebuild the new HDD along with a new recovery partition

Hi buddy?

I don?t think that this is really complicated? I could find all info regarding the recovery procedure in the user manual?

The recovery disk has to be created at the first day of purchase? its recommended to create one in cases something would be wrong with the HDD.

The recovery disk contain an image?. Image is a package containing Win system, drivers, tools and all the stuff preinstalled on the notebook.
You purchased the notebook and the system was already activated so you don?t need the key placed at the bottom of the unit.
Furthermore the usage of recovery disk formats the whole HDD (partitions too) and set the notebook back to the same state like at the first day of purchase.

There is also another option to recover the notebook called HDD recovery. This HDD recovery does not need recovery disk. Usage of HDD recovery would format ONLY the C (system) partition.

2 more replies
Relevance 73.39%

I just purchased a brand new laptop and have realised that it didn't come with a recovery disc or a recovery partition on the hard drive.

Just wondering if my hard disc crashes how am i supposed to reinstall windows?
The laptop i bought is a Toshiba satellite L500 and is only a few weeks old.

If anyone could help on the subject would be very much appreciated.

Answer:Satellite L500 - No recovery disc or recovery partition - How to reinstall?

Hi

Normally if I buy a new notebook or other product I read the user manual firstly. So I would recommend that you should the same before you ask different questions.

The point is that you have to create a Toshiba recovery disk yourself. Therefore start the recovery disk creator that is preinstalled on your notebook and follow the screen instructions. I recommend a high quality DVD-R medium to create this disk.

Furthermore you can reinstall Windows using the HDD recovery option. On the second partition you can find this folder that contains an image of factory settings and you can start this feature if you go in advanced boot menu and select ?repair my computer?. This is not a special partition, only a folder where the image is stored.

HDD recovery procedure is the same as Toshiba recovery disk. You get back factory settings too but the recovery disk wipes the whole HDD. The HDD recovery only the first partition.

By the way: Normally you did get this message:
+Important INFORMATION+

+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+

+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
... Read more

2 more replies
Relevance 73.39%

I have Satellite M305D-S4830, and try to restore the factory settings, the computer brings two DVDs, which were read well, but at the end of the second one generates the error with number 10-FC12-0241 and asked to press a button to turn off the computer. So far I have not been able to restore the system and nothing to boot the computer.

Please, help me fix the problem

Thanks

Manuel Fajardo Benitez

Answer:Re: Satellite M305D-Recovery factory defaults for Vista using the recovery

Hello,

Bad memory can cause Recovery problems.

Go to www.memtest.org and download Memtest. Its a bootable Floppy disk or CD that will test the memory for errors.

1 more replies
Relevance 72.57%

hi again...i got that Satelite L350 D -20 D waht have 400 gb Hdd 2xAMD . 700 MB graph card and RAM..well..there is weird staff.. i got two blocks of Ram 2x 2GB so it giving me 4 GB RAM in my laptop..nice ..i like it..need more but still is ok..
first thinkg i got 32 bit Os so system can works on MAX 3.5 GB ram so i losing 500 mb ..but ok..NP..im cool with 3.5 GB RAM..but..

when i starting AafterEffect i can see info aboute only 2 GB Ram Instaled..well i understand AdobeAftterEffet CS4 not use more thatn 2 GB of ram..what is weird .. so maybe its explanation why i can see only 2 GB RAm instaled on startup...BUT.

this is not only one Software what can see my RAM like 2047 MB Instaled ONLY.. Moste My programs see 2 GB RAM ... i was instal RAM Free program to clean memory but more i was use it to check for see how Program will see my Memory.. and again..program can see only 2047 MB of RAM..WTF..
In Control panel / System/ ican see i got 3.5 GB ram instaled on board.. more..DxDiag Same..showing me 3.5 GB Ram instaled... LOL O_o ..

i dont realy understand why Systyem can See memory but Programs what use it MOSTE CANT see it..
any sugestions ?

Answer:RAM `problems` Satellite L350D-20D

>In Control panel / System/ ican see i got 3.5 GB ram instaled on board.. more..DxDiag Same..showing me 3.5 GB Ram instaled... LOL O_o ..

So everything is ok here buddy? the windows has recognized the 3.5GB due to the 32bit limitation.
The programs address only the memory which is used by application.. therefore you don?t get the full 3.5GB

3 more replies
Relevance 72.57%

Hi all

I have a customers Sat M40-197 which was badly messed up with malware so I did a full recovery using the supplied disc which has the product number PMR400490EN0. After restart the system just hangs in normal mode, and on safe mode I notice that the last line logged is Mup.sys but even in that mode the system still doesn't start. I've tried using Ghost in advanced mode not resizing the partition but no matter what I try I can't get it to start.

Before I take what I think is my only option of using a standard OEM XP Home disc and installing using the supplied product key I was wondering if anyone had any solutions to this?

Thanks in advance.

Answer:Satellite M40: Recovery procedure hangs on restart after using recovery CD

Hi,

sounds first like some Recovery CD error. I mean it?s possible that the CD is physically damaged or whatever and then some data may be corrupted.

If not then I would assume the following reasons:

- HDD is not properly formatted -> reformat it completely and create one BIG partition
- HDD is faulty -> check the HDD with some special HDD tool from the manufacturer (in most cases you can download it from the manufacturers website)
You can also download "UBCD4WIN" (just google for it) and check your HDD with the integrated tools
- The memory could be faulty -> use the "UBCD4WIN" and check the memory with "PI" or "SuperPI"

Thats it..
;)

Greets

1 more replies
Relevance 72.57%

Dear all,

I delete all data in C:\ drive and I do a format c:\

I don't create a Recovery CD, and now I can't restore with F8, but I show that I have a recovery partition on D:\ drive.

Please, how can I restore it ?

Thanks in advance for your help.

Best regards,

TOSHIBA C670

Answer:Satellite C670 - formatted C:\ and no Recovery CD but recovery partition

Hi

Maybe this thread about a similar theme would be useful for you:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=53952

If this is not helpful or if you will not be able to recover the notebook using the method mentioned there, then you will need to order the recover disk from here:
http://backupmedia.toshiba.eu/landing.aspx

3 more replies