Computer Support Forum

Satellite L300 - Recovery wipes C drive then fails to rebuild

Question: Satellite L300 - Recovery wipes C drive then fails to rebuild

My Satellite L300 has just come back from Toshiba for repair under warranty and before having a chance to burn Recovery Disks came up with the BSOD. Removed hard drive and placed in a SATA cradle and ran chkdsk which repaired it to the extent that (back in the laptop) I could at least access the Recovery Console.

I selected return to Toshiba factory state (or something similar - can't remember the exact wording!). C prompt screen came up and all seemed to be going well until it came up with an error. Retried it twice but the error / failure notice came up both times. Tried to reboot to safe mode but no bootmgr. Removed the disk again and placed it in the SATA cradle and the C partition seems to have been wiped.

With no windows installation at all, is it possible to run the Toshiba recovery (start and holding 0 does nothing)?

Would a Windows Vista recovery disc do anything or enable me to reaccess Toshiba's recovery?

Any ideas? Help,Please!

Relevance 100%
Preferred Solution: Satellite L300 - Recovery wipes C drive then fails to rebuild

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Satellite L300 - Recovery wipes C drive then fails to rebuild

Hi mate,

Wait a moment, please! Which error message you get exactly and what you mean exactly with the SATA cradle?

Notebooks are country specific so which L300 you have exactly? This is important because the HDD recovery works different on the notebooks or let?s say there are different ways how to start it.

> With no windows installation at all, is it possible to run the Toshiba recovery (start and holding 0 does nothing)?
Another question: How you want to start the HDD recovery procedure if now Windows is installed? ;)
Right, that?s not possible!

In your case I would order a new recovery disk. You should contact the ASP in your country!

3 more replies
Relevance 92.66%

I have today taked delivery of a bright, shiny, brand new recovery disk, direct from Toshiba. I was under the impreession it would wipe everything from the hdd and recreate a factory install with HDD recovery partition (which is what I want) but it fails every time at the same place with the following error message:-

[WARNING] W\:sources\boot.wim [uncompress File: (seq. 90) -> file corrupted in block at offset 024D8020

Any ideas how to solve this or have I waited 2 weeks for a dud CD??

Ta, Fred

Answer:Satellite L300 - Fails during recovery installation


I have also Satellite L300 but never had a problem with the Toshiba recovery disc.

What happens if you install Windows using a Microsoft disc? Does it work or do you get an error message too? If yes it might be a hardware issue, HDD, RAM or something else.

Furthermore I did read here in forum that it?s sometimes useful to format the whole HDD before using Toshiba recovery disc.
Check this!

5 more replies
Relevance 79.95%

I?ve got Norton virus protection and when I backed up my laptop I saved backup into D drive which is partition backup drive...
I want to factory reset the laptop but I can?t do this as it says can?t find backup drive

Is there a CD I can clean the laptop with ...I think there must be something missing from the backup drive D.
Can someone tell me how to sort it plsss
I have no backup disks and have no CDs that came with the laptop as I lost them.

Answer:Satellite L300-20D - system recovery is missing backup drive

The whole story is somehow confusing.

Factory settings you can have on two different ways:
-using recovery installation discs
-using HDD recovery option >

>I want to factory reset the laptop but I can?t do this as it says can?t find backup drive
Can you please explain to us how you have tried to reset laptop to factory settings and on which point you got this message?

2 more replies
Relevance 75.44%

I have recovered the system and "wiped" the C & D drives on a laptop and now I am having problems with certain programmes, I cant download the programme as it says my service pack is not up to date, I have:
version 5.12600 Service pack 2 build 2600 - installed on the laptop. Is there a download for that IS compatible with the service pack that I have on my laptop or how can I alter it, safely, to accomodate the programme, I am also having problems in that I cannot get the PCadvisor log on page to open on the laptop, it just stays on the ad. banner page and will not load the log-on page (but I can log on on this computer connected to the same router, I have been told there could be an issue with updates, how can I see if I have got the correct windows updates on the laptop? thanks LAPTOPDUNCE

Answer:Problems after recovery and Cclean hard drive wipes.

I have just tried to download the windows service pack 3, following all the instructions and then at the end of the whole rigmarole it comes up with "page cannot be displayed, try another page" - Oh, its a pain in the a**e this whole rigmarole!! LAPTOPDUNCE

10 more replies
Relevance 75.03%

Will not run on DC. Battery is appearently good (both Win7 and HMONITOR report it as 100% - HMONITOR says it has 17% wear, which is consistent with age)Runs OK on AC but will not boot or run on DC and will "die" immeadiatly if AC connector pulled.

Win7 detects if the battery is removed and is happy when it is put back.
Panel lights are consistent with a good battery - no flashing.

This happened after I fully powered down - normally let it sleep.

Satellite Pro L300-291

Rgds George

Answer:Satellite Pro L300-291 - Ok on AC but fails on DC


In your case I would recommend checking and testing the notebook with a new, good working and tested battery.
It sounds a little bit like a battery malfunction?

But of course this is just a suggestions and I think here in the forum nobody would be able to say what?s wrong exactly?

1 more replies
Relevance 75.03%

Talk about confusing. Does anyone know how to get a Toshiba C660 working after the HDD has failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will the recovery disk ( if you purchase one from Toshiba ) rebuild the new HDD along with a new recovery partition and install windows 7 (original OS ) and accept the product key printed on the Windows License attached to the base of the laptop. I have read a number of suggestions but these have been deemed incorrect by others.

Surely Toshiba must have a way of sorting this problem.

Do they read these posts ?

Answer:Satellite L660-12Q - Would recovery disk rebuild the new HDD along with a new recovery partition

Hi buddy?

I don?t think that this is really complicated? I could find all info regarding the recovery procedure in the user manual?

The recovery disk has to be created at the first day of purchase? its recommended to create one in cases something would be wrong with the HDD.

The recovery disk contain an image?. Image is a package containing Win system, drivers, tools and all the stuff preinstalled on the notebook.
You purchased the notebook and the system was already activated so you don?t need the key placed at the bottom of the unit.
Furthermore the usage of recovery disk formats the whole HDD (partitions too) and set the notebook back to the same state like at the first day of purchase.

There is also another option to recover the notebook called HDD recovery. This HDD recovery does not need recovery disk. Usage of HDD recovery would format ONLY the C (system) partition.

2 more replies
Relevance 74.21%

My Toshiba L300 fails.

When I try to start it up, it turns on. Then it says, Run System Normally and all that, what ever I choose it starts then it comes up with a bar and it has a green bar going back and forth and has (c) Microsoft Corporation under it. And thats all I've left it on for atleast 30 minutes now.

Answer:Satellite L300 - Fails to start-up


Have you tried to start the notebook in safe mode?
Therefore go in the advanced boot menu before Windows starts by pressing F8 and choose safe mode.

It?s really hard to say what is the reason for this but in worst case you must reinstall Windows using Toshiba recovery disk.


2 more replies
Relevance 73.39%


I have a Toshiba Salelite L300, comes up with screen saying: Windows failed to start because of a recent hardware or software change might be the cause, options are to run startup repair (which freezes when selected , screen goes blurry), or to start windows normally which also causes screen to freeze and go blurry.

I have tried connecting up to an external monitor but same thing occurs.

Op System is XP, laptop is approx 15 months old.

Answer:Satellite L300 - Fails to start and freezes


So if start up repair also freezes I think the Windows installation is muddled up and you have to reinstall the system?

Do you have the Toshiba recovery disk? If yes you can boot from it to get factory settings back. The disk will wipe the whole HDD and reinstall Windows with all drivers and tools from recovery image on the disk. Just follow the screen instruction, the most happens automatically, you have to only to click on ?next? sometimes ? That?s all! :)

2 more replies
Relevance 73.39%

I have a L300-16L and it now fails to boot up.

When the laptop is powered on, I get two options (can't be sure of the exact text as I don't have it with me at the moment):
1) Start Windows Repair
2) Start Windows normally

When I select option two, I get a blue screen and the error code for the failure is:
Stop 0x00000024 (0x00190444, 0x864d22e0, 0xc0000102, 0x00000000)

When I select option one, I get "The installed program cannot start. Click OK to turn off the computer".

I have downloaded and created a Vista Recovery CD from the Microsoft website, and have run
bootrec /fixmbr
bootrec /fixboot
neither of which fix the problem.

If I press PF8 during startup, I get various options including booting in Safe Mode. However after it has loaded various files (the last of which is CRCDISK.SYS), all I get is a black screen.

Unfortunately I have not created any recovery disks, but presumably I could select the Toshiba HDD Recovery option that is displayed in the options when I press PF8 during startup.
However I guess that I will need to copy all of my existing data first as this option will wipe out my hard drive (I am assuming that I will be able to copy the data using the Vista Recovery CD as it does allow me to open a command prompt window).

Does anyone have any other ideas on how to resolve this problem before I go down the HDD Recovery route ?


Answer:Satellite L300-16L - Vista fails to load

Ok, being an idiot I managed to delete the BCD file. Although I have recreated it, it only has details for the OS on the C: drive.
How can I use BCDEDIT to add the Toshiba HDDRecovery partition back into the menu displayed when I press PF8 during startup?

2 more replies
Relevance 72.57%

When I turn my laptop on windows fails to load. I don't have installation disks and I can't load into safe mode or anything. The file is \Boot\BCD and the status is 0x000000f. The info is 'An error occured while attempting to read the boot configuration data.

Can you help please?

Answer:Satellite L300-147 - windows fails to load \Boot\BCD

Can you enter ?Advanced boot settings? with F8 at start up?
Is option ?Repair my computer? available there?

7 more replies
Relevance 70.52%

Hi All,

I have the above computer (or should I say my wife) & it has been nothing but a right pain since the first day we got it.
I have had it about 2 years & must have had to reformat the HD at least 6-8 times using the Product Recovery Disc as laptop wouldn't boot.
The laptop runs Vista.

Anyway problem I have now is that once again laptop fails to boot but for some reason Product Recovery disc also fails to work.....
What can I do...

I have read on various forums that it might work if I reformat the HD first using some s/w on a bootable CD but how/ what S/W do I use.....?
The laptop has a 160Gb SATA HD installed. How can I check this is all working.
I have no idea if current problem is S/W or hardware related..

Does Toshiba have a utility I can use...?

Many thanks for any help....


Answer:Satellite U300-13U fails to boot and Recovery disc fails to work too


What happened exactly?
Do you get some error messages using recover disk?

Please check if the HDD is OK! You can check this in BIOS.
If the HDD is listed in BIOS then the BIOS found the HDD and the HDD is not dead.

Usually you could boot the notebook using an Live disk? for example Bart PE
It?s a bootable live windows CD/DVD

This can helps to format the HDD and then to use the recovery disk!

5 more replies
Relevance 69.7%


Well, for the first time in 8 years I had to do a system recovery using the disks i created when i first bought my l300-13s using the Toshiba Recovery Disk Creator.
I had inadvertantly deleted the HDD Recovery partition when i set out to do a clone using a bigger HDD.

What I want to find out is instead of making recovery disks to DVD can i make a recovery USB flash drive?



Answer:Satellite L300-13S - Recovery USB instead of Recovery DVD Disks?

When you open Toshiba recovery media creator you can see options which media can be created. I?m not 100% sure but I think on old L300 there was option for recovery DVDs only so I think you cannot create recovery USB.

5 more replies
Relevance 68.88%

Hi, my laptop crashed and there is nothing on my laptop and do not have the recovery cd/dvd. Does anyone have it that they can forward to me.
I have a Toshiba Satelite L300 14x. PLEASE help as I am desparate need of getting my laptop up and running again.

Answer:Need Recovery CD/DVD for my Satellite L300

If you need original Toshiba recovery CD/DVD you can order it under

2 more replies
Relevance 68.88%

I recently bought "Toshiba Satellite L300" which had Windows 7 operating system but the Recovery CDs had Windows XP.
And my hard disk was single partition and Microsoft office was not working on this notebook and I used that CD to fix these problems.

But I lost my previous Windows 7.

Now it is Windows Xp SP 3 on my computer.
But I am not satisfied with XP want Windows 7.

How can i get it again for free?

Please let me know that what is right Recovery CD for "Toshiba Satellite L300". ?

Answer:What is right Recovery CD for Satellite L300?

>I recently bought "Toshiba Satellite L300" which had Windows 7 operating system but the Recovery CDs had Windows XP.

Hmm? this is strange? I have no clue what Satellite L300 this is but usually an L300 series was preinstalled with Vista Home Premium

So I?m wondering why Win 7 was preinstalled and why you get Win XP recovery disk?

Usually the L300 should be equipped with an HDD recovery partition which would contain the Toshiba image.
It should be able to recover the new notebook using the HDD recovery and this should help you reinstall the Vista OS.

In my opinion you should talk with your dealer? maybe the notebook was a replacement device????
Who knows?

2 more replies
Relevance 68.88%

How are you?
Please I need CD/DVD recovery for my Toshiba notebook.
It is: Satellite L300-14X

Answer:Need recovery CD/DVD for Satellite L300-14X

You can order it under

Good luck!

1 more replies
Relevance 68.88%

Hi there,

Can anybody help me please.

My satellite pro L300 laptop crashed which I have had repaired.
Unfortunately I have no recovery disks for the operating system eg Windows Vista.

I can not find how to get these disks from the Toshibe website or to be honest what these disks are correctly refered as.

Any help would be appreciated..

Answer:Satellite Pro L300 - Where to get the Recovery DVD


The notebook supports the HDD recovery option. This means that you can reinstall the Toshiba image without using the Recovery DVD. You have to boot notebook and press the F8 button. The advanced boot menu will appear and there you should choose the first option ?Repair my computer?. Then choose Toshiba recovery (last option) and start the installation.

After this installation you could use the Toshiba preinstalled burning software called ?TOSHIBA Recovery Disc Creator? to create a own recovery DVD

But if you have formatted the HDD the repair option will not work because the recovery folder was also deleted. In such case you will be not abele to create the own Recovery DVD.

But you could order it from here:

2 more replies
Relevance 68.88%


Problem's with SATELLITE L300-13R, fails to start Vista.
Pressing F12 with recovery dvd, starts loading from dvd, then stops after about 30 second leaving a blank screen.

We also have seen the following message

STATUS: 0xc00000e9
INFO: An unexpected I/O error has occured

There is also an explanation that it may be due to an external device that has not been disconnected properly or a hardware error.

The recovery discs worked fine a few weeks ago.

Any other ideas?

Answer:Satellite L300-13R - not able to recovery


Did you try the HDD recovery?
You could start this press F8 at the beginning.
Then choose Repair my Computer and then HDD recovery.

You should also set BIOS to default settings and safe the changes.
Then try again.

4 more replies
Relevance 68.47%

I have a problem whilst trying to restore my Toshiba Satellite L300 laptop back to factory settings!!

Okay so basically, my Toshiba Satellite laptop screwed up and I even turn the thing on!!
After a while I was able to 'Restore to Factory Settings' and then after typing my name and Pc name etc. and after it had scanned whatever it scans, it says 'Step 2: Finishing Installation Prcoess May take several minutes. Do Not interrupt or shut down' Or or whatever it says...

Anyway, I dont know but it seems to be stuck at this screen! I Left it for like 30/40 mins and it was still doing it so I turned it off by the button. Now when I turn it on, I cant do anything until it finishes that installation but when I try let it, it doesnt seem to do anything!!!

Please help!

Additional Details
I dont have a recovery disc!! I am restoring it or recovering it or whatever from the HDD thing after you press F8 on the start up

All help appreciated

Thanks, Andy

Message was edited by: ADMIN

Answer:Recovery issue with Satellite L300

Hello Andy

Unfortunately there is no some kind of ?magic solution?. Either recovery installation works or not and there is no way to get it work somehow.

All you can do is to start recovery installation again, if possible. Please do this and send some feedback.

To be honest I don?t understand why you didn?t create recovery DVDs following Toshiba?s advice. If something goes wrong with HDD or HDD recovery image cannot be used you will be able to use recovery DVDs for OS installation.

5 more replies
Relevance 68.47%

is it possible to use the recovery DVDs on my TOSHIBA L300-1BW laptop without any recovery / hidden data on my HDD?

As I wish to upgrade my current drive for more space

Answer:Satellite L300-1BW - Can I use the recovery DVDs?


I?m not sure if I understand your question right but you can use the recovery disk for your notebook on every time. It?s not depending on the HDD or on partition.

For example if you exchange the HDD you can install the notebook using the recovery disk.

I hope I could help you a little bit.


3 more replies
Relevance 68.47%

Hi All

When using the recovery disk I get the following error: HDD01 is missing.
The laptop was fine before the recovery



Answer:Satellite L300 and Recovery Error

The drive appears in the BIOS. I tried a XP CD but it said not drive is found.

4 more replies
Relevance 68.47%

Hi all!

Have tried numerous places and can't find the answers I'm looking for, so here I am.

My nephew has a Toshiba Satellite L300 - 149 that won't boot up past the Windows Vista log in screen.

I want to do a full system restore on it (ie. back to factory settings) .

Now, it was shipped without recovery discs as seems to be the norm these days so, after much seraching I found the directions for pressing either the F8 and the zero key on boot up.

Now.... F8 brings up a menu (zero key does nothing) but the menu (Advanced Options or something) DOES NOT include the option to repair the system. It brings up a list of other things including....


There are a couple of other options too, but not a one that offers a complete recovery.

Can anyone shed light on how I can do a full restore via the HDD, or whether this model even supports the option? (There's been absolutely no tampering with the OS since it was purchased.) Failing that, where can I get restore discs from?



Answer:Vista Recovery Help - Satellite L300-149

Hello Bear

At first welcome to the forum and I hope you will find your answers here. ;)

Before we start our discussion I just want to know one thing: is preinstalled Vista on this L300 original Toshiba recovery image?
Fact is that ?Repair my computer? option (missing on your L300) is visible if notebook has ?factory settings? ONLY.

Has your nephew created recovery discs (DVDs) following Toshiba?s advice and using preinstalled ?Toshiba recovery disc creator? tool?

5 more replies
Relevance 68.47%

I'm needing to restore to factory settings and have SOMEHOW managed to delete my recovery partition...
After some little playing around and reading i figured it best to just order a recovery CD from the Toshiba backup media thingy.

Now, while reading around there were quite a few people who said that their recovery CDs didn't work because they had no recovery partition.

So, before i start throwing ?30 around i figure it best to ask :

*Will the recovery CD restore my laptop back to it's factory settings WITHOUT the recovery partition?*

Thanks for any help :D

Answer:Satellite L300 - Recovery CD question

> Will the recovery CD restore my laptop back to it's factory settings WITHOUT the recovery partition?


If you have the recovery DVD then you could use it in order to restore the notebook to factory settings.
Many people deleted the HDD recovery image on the second partition and were NOT able to create the recovery disk. But if you have such disk then the HDD recovery files are not needed to perform the recovery procedure.

3 more replies
Relevance 68.47%

Purchased laptop 3 months ago, my son has homework on it (40 pages). Laptop suddenly stopped working. When I try and boot it up it tries to start laptop in repair mode, loads files, goes to load up vista then I get grey screen saying (System recovery options) installed programme cannot start turn off computer.

Gone through every single f8 routine and the only one of interest is disable auto restart on system failure where I get error message : Stop oxoooooo24 (ox00190444,ox85a6bdeo,oxc0000102,0x00000000).

Didn't create recovery disc so phoned Toshiba have received put in and loaded file up It eventually comes to a point where to continue it will erase all data on disc. Which is what I don't want. Then took disc out, but it had loaded enough drivers to enable me to have a look in dos. When I look for the C drive, come back with a messagesaying unreadable. When I look in the D drive there are files including one saying HDD recovery. (i assume vista automatically partitions disc)

Anyway any suggestions? There is one file I need which is a works document (wps). Is there anyway I can recover from the d drive in HDD recovery through dos? any suggestions?
If I run the recovery disc will it delete both partitions or just work on C: and then through D: I maybee able to recover document?

Answer:Question about HDD recovery on Satellite L300


As I can see you have tested all options using F8.
Does it mean you have tested ?safe mode??
Can you start notebook in ?safe mode??

If your work is saved on partition D you can start recovery installation (F8 ? Repair my computer) and Vista will be installed again but all data saved on partition D will be there again.
- When you use HDD recovery option - partition C will be deleted only.
- When you use recovery DVD the whole HDD will be formatted.

1 more replies
Relevance 68.47%


I hope you can help.
I want to restore a L300 laptop back Factory Defaults, (XP).

I'm not able to boot to Last known good config or any Safe Mode anymore after several viruses infected the laptop and the restore points failed after antivirus packages identified them as infected and removed them among other items.

I have the Original Toshiba Recovery Disk and it loads fine and goes through the motions of unpacking...

...Finishing on 'Remove Media', and I click OK. Lastly clicking exit on the recovery application.
The laptop powers off.

I turn the laptop back on, and screen flickers a couple of times, shows windows logo and reboots. This repeats.

Run out of ideas....

F2 Bios setting look ok.

What can I do?


Answer:Recovery does not complete on Satellite L300


Not sure what could cause this but I think you should start with HDD check.
I use very nice freeware software called Drive Fitness Test. Use this software in order to check the HDD for malfunction.

If the tool would detect some HDD problems, then you should replace the software.

By the way: are you able to boot the notebook using an Live CD lie Knopix Live CD (Linux) or an Windows live environment WinPE or BartPE? Check this.
Usually the live cd does not need any installation? you boot simply from the CD in order to load the OS.

13 more replies
Relevance 68.47%


I have a question about the recovery for a Tosihba Satellite L300-1AY with Windows Vista pre-installed.
I wanted to recover my laptop and when I pressed F8 during start-up I could choose the restore my computer.

But after that part I got a message-box (System Recovery Options) telling me that the installed programs could not start and the only option I had was press OK so the computer would turn off.

I was wondering if there was any way this could be fixed or if there's another way to recover my computer.


Answer:Satellite L300-1AY recovery not working


You could recover the notebook using the Recovery DVD which you have hopefully created before this issue happened?
Did you create such recovery DVD?

If not then only the HDD recovery option can be used.
For this you have to press F8 after notebook has been powered up.
Then choose ?Repair my Computer?.
Then a new window will appear and then you could choose Toshiba Recovery.

If this procedure will not start up and if you will be not able to use the HDD recovery then you need a Toshiba recovery DVD.

If you didn?t create the recovery DVD then you could order it from here:

5 more replies
Relevance 68.47%


Forgot to make a "Recovery CD" on first start up, is there any way to do that later?

I really want to reinstall Windows Vista on my Satellite L300-17K, and i did not get any system?s CD when i bought the laptop. I asked the retailer for a system CD but he said that i should get a message on first startup saying that i should make a "Recovery CD". But as i recall, such message never came up.

So how should i do now when i want to reinstall the system, without buying a new license?

Thanks in advance!



Answer:Satellite L300-17K - How to create a recovery CD?

Hi buddy,

What OS you have installed now? If the preinstalled OS from Toshiba is still installed, you can create a Toshiba recovery disk if you start the ?Toshiba recovery disk creator?. This tool is preinstalled on your computer in start > all programs > Toshiba.

If you don?t have the original OS anymore, you can order a recovery disk from Toshiba directly:

3 more replies
Relevance 68.47%


How I can get recover CD for Satellite L300-135
Model Number PSLB0E-02H01HAR?

I have format the disk & I have not had the CD recover
What can I do?

[email protected]

Answer:Need recovery disk for Satellite L300-135


You can order a new recovery disk on Toshiba.
Here is the link:


2 more replies
Relevance 68.47%

I have a Toshiba Satellite L300-22X. I tried to restore to new settings and it said I have a missing file so it could not restore so I turned off my laptop it loaded up a black screen saying please insert windows disk my laptop didn?t come with a disk and I can?t get around it any way.

Can someone help please?

Answer:Satellite L300-22X and recovery disk


Can you start recovery installation as described in

2 more replies
Relevance 68.47%

Hi all, is it possible to boot the recovery image from an L300 in DOS?

The reason I ask is, I have a laptop that will not boot in any way shape or form. If put in a Vista disc and go to DOS prompt I can see the recovery partition & files, so is this possible or what are my options?

Thanks in advance
Regards, Ciaran

Answer:Satellite L300 - Can I start the recovery from DOS?

> , is it possible to boot the recovery image from an L300 in DOS?
I doubt this is possible?

What you could do is to start the Toshiba HDD recovery procedure pressing the F8 button.
Then a boot menu should appear and there you should choose the first option called ?Repair my Computer?.
Then a new window should open providing a option called Toshiba recovery.
Choose it and usually the HDD recovery should start.

But this procedure is possible only if the second partition and the HDD recovery folder have not been changed

2 more replies
Relevance 68.47%


I have the Satellite L300 Notebook with the reinstalled Windows 7.
A year ago I installed an original Windows Vista Version, but I don`t created a recovery disk from Windows 7.
I saved all the recovery files on another partition, but I need the Recovery Utility to create the install disc.
Where can I get this utility?

many thanks in advance

Answer:Satellite L300 - Where can I get the Recovery Utility


You cannot download this.
The Toshiba Recovery disk creator is preinstalled and you should always create the recovery disk BEFORE changing the OS or something on the HDD.
Saving the recovery files on another partition will not help you because the Toshiba Recovery disk creator will not recognize this?

Now, you will need to order the Recovery disk if you want get back the notebook?s factory settings.

3 more replies
Relevance 68.47%


I need help using system restore.

I have a Toshiba L300 1A3 wines. vista.

The system fell, tile lack of recovery. Attempting to repair through F8 initially went, everything was going according to the directions and suddenly the computer turns off after a few seconds to turn on and nothing.

Nothing works, None, F8,, 0 '' and others.

There are only F2 and F12. After pressing any key is only a sound signal and nothing works.
Is there a chance to revive it or is it better to give somewhere to the site?

Answer:Satellite L300-1A3 - recovery problem

First of all: this is English language community - Please post in English!

Now some questions:
Is HDD recognized by BIOS (first BIOS page)?
If not, the HDD is dead and you would need to replace the HDD.
After that you would need to use Toshiba recovery disk in order to install the system again.

If you don?t have such disk, you will need to use Microsoft Windows CD to install the OS.
Essential drivers are available on Toshiba EU driver website.

By the way: such questions were posted many times in this forum. Go through singles threads and read the recommendations.

2 more replies
Relevance 68.47%

I have a Satellite L300 that freezes at start-up and the f8 function does not work to take me into the recovery menu.
I do not have a recovery disk for this machine, but do have one for a Satellite A100-065.
Both machines are running vista.

Can you please tell me if i can use this disk on the l300?

Answer:Can I use the Recovery for A100 on Satellite L300?

I don?t think that your A100 recovery disk will run on L300.
Both notebooks are completely different and were equipped with different hardware specifications and therefore the drivers which are on the A100 will be not compatible with L300.

Furthermore I doubt that you will be able to perform the Recovery setup using the A100 disk on L300. Usually you should get an error message.

7 more replies
Relevance 68.47%

I have just bought an L300 which has Vista on it, I'd prefere XP but don't have the XP recovery disk. Any chance of a copy of XP recovery disc?

Answer:Need WXP recovery disc for my new Satellite L300

Please note that all L300 laptop models are not the same and Toshiba offers L300 with 6 different hardware platforms.
What you can try is to get one, if available, at

2 more replies
Relevance 68.47%

My laptop didn't start up anymore, so I start to recover with the 2 DVD's I made myself when I bought the laptop.
(I already used the DVD's succesfully to recover a 2nd hand laptop)

The disk is already formatted succesfully, but the procedure stops when following error appears "File creation error - Data error <cyclic redundancy check>. Copying of Recovery Base files failed! Prees any key to continue...".
Then everything in DOS stops: X:\windows\system32>_
How can I proceed, with what DOS-commands?

Please advise. Thanks in advance.

Answer:Recovery failed on Satellite L300-19F

When the recovery procedure starts everything runs automatically and if there is no problem with recovery image, DVDs you?ve created or HDD the whole recovery procedure will run properly.

You cannot have any influence on this and you cannot put some DOS commands to continue recovery procedure.
Do you use recovery DVDs on machine they are created for?
Have you changed anything on the notebook like HDD upgrade?

3 more replies
Relevance 67.65%


I'm in desperate need of assistance, hope someone can help me here.
On booting up laptop one day I got the dreaded ERROR LOADING OPERATING SYSTEM.

So I bought a recovery disk from the media shop for my laptop.

Now, I've tried all the F8 stuff but this doesn't work for some reason on this laptop.

Anyways, disk arrived and did exactly what it said on the back:
Insert disk and powerdown machine
Press F12 on boot up and select Optical Drive.

Right now when it powers back up, I get the WINDOWS IS LOADING FILES.
Then the MICROSOFT CORPORATION (with the bar above it), once this goes on a few seconds the CD/DVD drive stops and then get a black screen.

It doesn't go any further than that.
Tried restarting laptop without disk in, and all that is coming up then is
Press Ctrl+Alt+Del to restart

What do I do?????
Can I get hold of the Media Shop and tell them that the disk doesn't work? if so what is their e-mail address?????

Thanks in advance.

Answer:Satellite L300 - Recovery disk stops


In my opinion it?s really hard to say what the reason is for this. It could be also an issue with the CD/DVD drive or the HDD.
So have you tested a Microsoft installation disk? You can try it with a XP or Vista disk from Microsoft. If you have booted from it try to format the HDD. Sometimes it?s necessary to format the HDD before you can use the Toshiba recovery disk. On this way you can also test if your CD/DVD drive is working.

If the Microsoft disk is also not working it could be a problem of the HDD. You can check the HDD with a diagnostic tool like Drive Fitness Test. Google is your friend to find it ;)

Good luck and if you have more questions, please let us know!


3 more replies
Relevance 67.65%

I have had Windows reinstalled on my laptop after having a problem with BIOS (result of having windows and ubuntu on the same machine! However I know want to make a recovery disk as I forgot to to do that before. I have downloaded the Recovery disk creator but no longer have the recovery partition as they wiped everything when windows was reinstalled.

Any ideas on what is best to do?

Thanks :)

Answer:Re: Satellite L300-1G5 - Where to get Toshiba recovery disk?

That's the point that you had to do it when bought your laptop. Now, you can't make it as it's not available anymore on your laptop. Installing Ubuntu you wiped it.
Now, you can:

1 Order [Recovery disk|] from Toshiba for money
2 Get windows copy disk to install. All drivers you can find on the [European Toshiba Driver Page|]

2 more replies
Relevance 67.65%

Dear All

I wish to find out how many recovery disks my L300-1AQ (Model No PSLB8E) laptop requires.

I have a disk that I made when I bought the computer but I cannot start using it untill I make sure that only one disk is required (if more than one disk is required and I start the recovery process I believe I will render the computer unusable). I know that recent Toshibas come with multiple DVDs so it's definitely worth my checking before I do anything.

Oh and the recovery partition is gone due to an "aggressive" installation of linux, so that's not an option for us (it's new user is a windows user).

I cannot find this information on the internet or in the manual so I would be grateful if anyone out there has this information.

Best wishes to all

Answer:Satellite L300-1AQ - How many recovery disks required?

Hi DiodePrridge51b,

If Toshiba recovery disk creator required 1 disk only, you need only 1 recovery disk to restore factory settings.

It?s always depending on the notebook model and OS how much disks you need but if only 1 disk was required it?s enough and you start recovery installation. :)

3 more replies
Relevance 67.65%


My laptop started giving problems (slow booting & hanging inbetween) so I tried to re-instal with recovery disk but whaile installation it ask for lang. & confirmation data deletion and after minutes installation stoped & turn to Dos mode (Admin to X:).

When I restarted labtop it shows Bootmgr failed.

Then I contact service center & they replaced the HDD with new, but still the same problem.

I even tried to instal XP SP2, after copying files it shows HDD not found.

Pls help

L300 - 10Q series

Pls advice also how to check Windows XP is of 32 or 64 bit?

Thanks again


Answer:Re: Satellite L300-10Q - Can't install with the recovery disk and XP SP2

If you try to install your notebook with the Microsoft installation disk you need the SATA drivers. You can find it on the Toshiba website.
You must load the drivers from an external FDD or you integrate it in a new CD with nLite (

For the recovery disk you don?t need such drivers because they are already on the disk.
If you get the same problem with the recovery disk you should check your HDD with Drive Fitness Test (Google is your friend).

3 more replies
Relevance 67.65%


We have a Satellite L300-149.
Was running really slowly so wanted to reset it to factory settings.

Did the 'press F12 when starting, put disk in' etc etc BUT have a horrible feeling that I put a disk in that actually belonged to a different Toshiba we used to use a U300.
The 'give away' was that the user manual for the U300 is now on the desktop on the Satellite :-/

I hoped that this wouldn't be a major problem BUT the F8 key has now disappeared making it impossible to connect to the internet.

I looked online and read that the L300 sometimes doesn't come with a disk as the info is kept on a separate part of the hard drive so hoped I could reset it back to factory settings again but when I click F2 on start up and go to the option to restore it, noting happens.

Can anyone please help??????

Answer:Help needed with system recovery Satellite L300-149


Forget the HDD recovery now?
You have recovered the system using another disk and this has deleted the HDD recovery image files. So this option is NOT possible!

You are right? the L300 and all other notebooks are not delivered with Recovery disks.
The recovery disk has to be created using the preinstalled software called Recovery Disk Creator. But this is also NOT possible because you removed the preinstalled system and the files which are needed for such recovery disk are not available anymore!

But if everything work properly except of the WLan FN + F8 key, then I would recommend to install only the Wlan driver. I think the key does not work because the right WLan driver is not installed.

I think the Satellite L300-149 supports the Wlan Realtek RTL8187B chip.
So install the right Wlan driver which you can find here:

4 more replies
Relevance 67.65%

I have a Satellite L300 1AS Laptop running Vista and I want to restore back to factory settings as when bought.

I created the 2 DVD restore discs when first setup.
When I boot from DVD drive with restore discs I get to choose language then that's it. When I click 'next' I can't go any further. I can move mouse but that's it. I have tried booting up then pressing F8 and then repair Windows but only get a black screen and nothing else.

Is there anything else I can try to format my drive back to factory settings

Answer:Satellite L300 - Nothing happens if I start the recovery disk

What is the reason you want to run Recovery in the first place? Was it not booting properly? Was it giving a BSOD?

Can you hear noises from the Hard Disk?

Test the Hard Disk for errors by using DFT.
DFT Download:

Download the ISO File and burn it to a CD-R Disc (There is also a Floppy Disk version if that's easier).
If you dont know how to burn an ISO file, read this guide:
Restart your laptop and boot from the DFT Disc.
Choose the "Advanced" Test and let it run (it may take an hour or so).
If you see a red message box, the HDD is faulty.
An error od 0x70 means there are bad sectors and the HDD needs replacing.

Also test the RAM for errors.

8 more replies
Relevance 67.65%

I bought a Toshiba Satellite L300 and erroneously I deleted the HDD recovery folder located in the partition E, now I cannot anymore make a recover of my system in the case something goes wrong. I am wondering how to reinstall HDD recovery disk creator.

Answer:Satellite L300 - Recovery folder deleted


If you have deleted the HDD recovery folder you can?t create a recovery disk anymore.
You are also not able to reinstall Windows without disk.

Reinstalling the Toshiba Recovery Disk creator will not solve this problem. This is only the program that doesn?t contain the files for recovery.

So in your case you need a recovery disk. You can get one from a local ASP or you order here a new one from Toshiba directly:


5 more replies
Relevance 67.65%

Hey there,

can anybody help? I got a Satellite L300 and today I wanted to reset everything. So I started a product recovery. Pity I did not check the DVD before starting. It was scratched although I did not use it before. So recovery stopped in the middle of nowwhere. I can not finish recovery - I can not start computer - and I can not copy the disc on another computer (tried that of course).

Is there anywhere a site where I can download a disc image of the product recovery??

Thank you!

Answer:Satellite L300 - Can I download the recovery disk?

Hey horst,

You can?t download the Toshiba recovery disk but you can order a new one here:

By the way: If the preinstalled OS from Toshiba is still installed you can also use the HDD recovery option. Therefore go in advanced boot menu and select ?repair my computer?. After this you have factory settings again and you can create a new recovery disk.
But remember: It?s only possible on preinstalled OS. I assume it was Vista?!

1 more replies
Relevance 67.65%

I was using system recovery. It got half way through and it stopped.
Now the laptop won?t do anything. It is a Vista preload

Any help would be great.

Answer:Recovery load stopped at Satellite L300


Try to start the HDD recovery again.
Press the F8 button immediately after notebook has been powered up.
Then choose ?Repair my Computer? and choose Toshiba Recovery in new window.

The HDD recovery should start and should reinstall the Windows Vista again.

Check it out!

2 more replies
Relevance 67.65%


I'm trying restore to factory settings but not having any luck.

I have tried pressing F8 when toshiba logo comes up, it goes to the advance boot screen and I select repair computer and it starts windows. I don't get the recovery options.
I have also tried pressing zero when powering up the laptop just beeps at me.

What im I doing wrong?

its a L300-149 running vista

Answer:Cannot recover Satellite L300 using HDD recovery option

As I can see all you do is right.
Switch your notebook ON and press F8 several times and you will enter Advanced Boot options

The first option should be ?Repair your computer? and after two or three steps you should see System Recovery Options and last option there must be ?Toshiba recovery?.

Have you used this recovery options in the past or you try to use it for the first time?

3 more replies
Relevance 67.65%


I normally use DBAN to wipe my disks, however, I'm interested in doing this on a laptop without destroying the recovery partition.

Basically on a Satelitte L300 I would like to wipe the HDD using DBAN (Darik's Boot & Nuke) (but preserve the recovery partition) and then do a clean install of Windows 7. Is this possible or do I need to look at another alternative?


Answer:Re: Satellite L300 - Keep recovery partition when using DBAN

I don?t use DBAN and cannot give you proper answer but one thing I must say: create recovery DVD using preinstalled ?Toshiba recovery disc creator? and after doing this you can do whatever you want.

If something goes wrong you can install OS using these discs.
Please note: when you install own Win7 using non-Toshiba disc saved recovery image has no sense anymore because you will not be able to start HDD recovery anymore. To get factory settings again you must use Toshiba recovery DVDs.

3 more replies
Relevance 67.65%

My son has a Satellite L300-1AQ running vista. Suddenly the laptop will no longer load and the auto repair options fails too. There is a blue screen appearing but only for a second when I try the repair option - then the laptop shuts down. We do not have any recovery disks.

I also have a Satellite laptop L300D-13S which works ok and presume I could obtain a recovery disk from that - but prob diff drivers etc.

Can anyone advise me how best to my sons laptop (Im not concerned about data recovery as all backed up already) but do want to get it back to factory settings incl Vista. Not sure whether using a recovery disk from my laptop is an option to consider - instinctively it isnt as never that simple.

Any advice welcome please.

Answer:Satellite L300-1AQ - Can I use the recovery disk from L300D?

Hi mate,

I can?t imagine that the recovery disk from Satellite L300D will work on Satellite L300. The hardware platform is different because one machine is equipped with Intel CPU and the other one with AMD CPU so there is a big difference.

Furthermore in worst case it could be a hardware issue and in this case the recovery disk would not work?

What you can do now? I think you have to options: Either you install Vista from a Microsoft disk or you order a Toshiba recovery disk:

After the installation from the Microsoft disk you can download all drivers on the Toshiba website. Then you will get also ?factory settings? back but it takes longer as recovery disk because it contains an image where already all drivers and tools are included/installed.

I hope I could help you a little bit. :)

2 more replies
Relevance 67.65%

So I got cocky and didn't install any anti-virus software and ended up getting drowned in spyware so instead of going through the hassle of trying to remove each one whilst they slowed the computer to a halt I decided to reset to factory condition.

It seemed easy but now after the first part (a command window with a percentage) it told me that the HDD recovery had failed.
What can I do now as I cannot use my computer, I don't have a Vista disk because Toshiba claimed I could recover from the harddrive I could use XP if there is no quick fix as I have a disk for that but how easy is it to find and install all the drivers, by the way it's an Satellite L300.

I have no idea why the recovery partition isn't working as well, so what do you guys recommend I should do?

Thanks, Guy.

Answer:Vista HDD Recovery Fail on Satellite L300

> It seemed easy but now after the first part (a command window with a percentage) it told me that the HDD recovery had failed. What can I do now as I cannot use my computer, I don't have a Vista disk

Did you try to start the HDD recovery again?
Simply press the F8 button after notebook powering up and choose ?Repair my Computer?.

Usually this should help to start the HDD Recovery again.

If this will not be possible then you will not be able to recover the notebook without the Toshiba Recovery disk.
It?s really stupid situation if you didn?t create the recovery disk before this issue happened :(

Well, your last chance would be this website:

Here you could order a new Toshiba Vista recovery disk


2 more replies
Relevance 67.65%

Dear friends,

I try to install windows Vista in my PC with my backup CDs which I made when I bought my Toshiba Satellite L300 almost two years back.
Now today I was trying to install it on my PC but I received the error that 09115xsp.swm file cannot be copied from CD to HDD c:! It was something like that error and also Acrobat adobe 8 something something....

Sorry I forget it already cus I?m at internet cafe and try to get help. Is there any possibility so solve this issue..If I can download some files from internet. It don't mean that I have to buy new windows right? Help me!!! This error never shown before while I install windows previously on my laptop.

Thanks in advance.

Answer:Cannot instal recovery image on my Satellite L300

Is maybe installation disc damaged (scratches on the side with data)?

4 more replies
Relevance 67.65%

Running Windows 7 Home Premium 64 bit on my L300. Deleted by error the Toshiba webcam program and now i need it back.

Anybody out there knows how to accomplish this piece of magic because i have'nt a clue.


Answer:Satellite L300 - Webcam program recovery

Hi buddy,

Your problem description is not very clear but I assume you need the webcam software for reinstalling it...

Anyway, you can download it here: > Support & Downloads > Download Drivers
Notebook > Satellite > Satellite L Series > Satellite L300

Check this!!!

5 more replies
Relevance 67.65%

Yesterday my Laptop L300-20D completely crashed.
When I restarted it, it wouldn't load up so i switched it off and it took me to recovery.

When the recovery was finished it restarted again and started to boot up, but after a few seconds it blue screened. I tried safe mode. Nothing. I went back to recovery and it told me that recovery wasn't working.

I have no idea why it crashed bacause i hadn't dropped or banged it.
I remember it making this weird click sound, like it would click repeatedly 8 times really fast, and then stop for a second and do it again.

I have no idea what is wrong with it??

Answer:Satellite L300-20D crashed - BSOD after recovery


> I remember it making this weird click sound, like it would click repeatedly 8 times really fast, and then stop for a second and do it again.
This sounds like a HDD issue and I think the HDD is crashing so it causes this weird click sound.

In your case I would check the HDD using a special diagnostic tool like Drive Fitness Test. Use Google to find this tool or another one. It?s freeware and easy to use. If you download the iso-image it creates a bootable disk where you can start this test from.

Alternative you can try the Toshiba recovery disk. Normally the recovery disk works always.

1 more replies
Relevance 67.65%

I have the same problem! I bought my Toshiba Satellite L300 a month ago but the Windows Vista recovery disk was not included in the package. Is there any option to save or to recover the Windows OS just in case I need to reformat my laptop?

Answer:Satellite L300 - Where can I get the Toshiba recovery disk?


I you would read the user manual, you would know that you have to create a Toshiba recovery disk yourself so please check your user manual!!!

And here you can read more about recovering a notebook:

2 more replies
Relevance 67.65%

Mate has an L350 which is completely knackered and unfortunately has no recovery disks. Could I use my recovery disks for my L300 model or will that just make things worse?

Answer:Satellite L350 - Can I use the recovery disk from the L300?

You could try but it may be missing Drivers or it may BSOD depending on the hardware differences.

Can you run Recovery from the HDD? Press F8 when Windows starts and choose the Repair/Recovery option.

Otherwise you would need to buy a replacement recovery disc from Toshiba.

2 more replies
Relevance 67.65%

Will the recovery disc with reference GMR400712PT0 run on Toshiba L300?

Thank you!

Answer:Recovery Disc (GMR400712PT0) and Satellite L300

As far as I know Satellite L300 was delivered without recovery DVD and only with HDD recovery so I presume it is not original recovery DVD.

Where have you find it?
By the way: is Portuguese your native language?

4 more replies
Relevance 67.65%

Hello everybody,

I have reinstall my Windows Vista, the last score before reinstaling Vista is 3,2, but after reinstall and download driver software from official web site I have score 3,1. I think there's something wrong ???
So by default when i buy my laptop, I don't recive any disc's with drivers or Vista.

I have two questions.

1. Can I request disc with drivers for my model by Toshiba support?
2. If I reinstall my Vista, can I lose my Warranty?

Thank you a lot!

bILLY ;)

Answer:Satellite L300-11M - recovery disk required


The Recovery disk can be ordered here:

Your warranty will not cancel if you reinstall the Vista OS?
Any software installations don?t affect the warranty?

2 more replies
Relevance 67.65%

Okay, so I've lost all my disks for my laptop (story tl;dw) and then it dies. I order a new recovery disk image from Toshiba and start running repairs from it.

Firing it up, I press F12, select CD/DVD from the Boot Menu and press Enter.
It gives me a message 'Windows is loading flies..." and a progress bar.
Progress bar completes, clears the screen, then there's about thirty seconds of the 'Microsoft thinking bar' animation, the computer stops making hard drive/CD drive noises.

Nothing happens.

For ten minutes, nothing happens.

Except a chunk of my electricity bill is consumed by the blank backlit screen.

Any words of advice, support, etc. greatly appreciated.


Answer:Satellite L300-147 Recovery disk problem


At first I can say that recovery disc cannot be used for repairs. You can use it for clean OS installation only.
Described behaviour is definitely not OK and you should be able to see menu with listed language options.

What you can do?
I?m afraid not much. Set BIOS to default settings and try several times to see if you will be lucky and recovery installation will starts properly.
For testing purposes you can try to obtain Microsoft installation disc and see if operating system installation will starts properly.

4 more replies
Relevance 67.24%

Hi, I have an Acer Aspire 5610. I am trying to rebuild the hard drive as it had an error message sying hd failure was imminent and now it wont load windows properly. I have pressed F2 to enter Bios menu, set it to load from CD-ROM and put recovery cd in however i dont think its working properly as it doesnt come up with any options to rebulid drive, it comes up with windows disk check as does without the disc in.Please can anyone help??Oh and i've tried pressing ALT+F10 on startup but nothing happens. Thanks

Answer:Rebuild hard drive with recovery CD's Acer laptop

Recovery may be trying to access the hidden partition on the failed hard drive.if the drive is failing mechanically I think you ned a new drive.

1 more replies
Relevance 66.83%


my experience with computing is very limited, so I will be using very simple language and maybe some stupid words.

I have a Toshiba Satellite L300. I want to reboot it because of some research and some discussions that have been made through it.
I know that even if I delete them in my history they still remain in the hard disk, HHD.
So I wanted to reboot my pc, I have contacted computing guy who sold me the pc and he said that I can use a recovery disk to get back my original windows but does it mean that this disk will also install the old memory?

In short I was to boot my pc to get rid of all the images, msn discussions, google search being made from my pc.
Its History, the ones that are still keept in the pc but I can't get access to.
I haven't created my recovery disk yet but will it include my old files and history? or just windows and the drivers?

Answer:Satellite L300 - Toshiba Recovery Disck, what does it memorize?


As I understand you want to format (you call it ,, reboot) your hard disk to remove all the information such as history, files that nobody can read it.
Please, remember if you even format your hard disk, it's still possible to recovery all the data from your hard disk.
As I know, there is a good software called Tech Erase, it can securely destroy all the data on your hard disk and almost impossible to recover it (depending what algorithm use choose). But I don't understand why you need it. Do you have something special?
About talking recovery disk, you can make a new installation but the information from old one can be recovered by the special utilities.

Message was edited by: Jeka-IL

9 more replies
Relevance 66.83%

Hi All

I bought a L300 without OS and now its working pretty good with Vista32 . But I need to install Toshiba Recovery Disc Creator on this notebook. I have tried many toshiba web sites, but I'm unable to find this utility on the tosiba web(s). Please help me on this and I appreciate if some one can send the download link for Toshiba Recovery Disc Creator Utility.



Answer:Satellite L300 - Where can I download the recovery disc creator?

Sorry buddy but the Toshiba recovery disk creator can not be downloaded.
Normally the Toshiba recovery disk creator it?s preinstalled on the notebook if the notebook was delivered with Windows Vista.

The only way to get a recovery disk is to order a new one from Toshiba directly:

2 more replies
Relevance 66.83%

I have purchased recovery discs for my notebook.
I received 2 discs from Toshiba. Item number R10249DU on both.

Booted on disc 1 and installed. No problem.

However, when do I use disc 2? I have not been prompted to use it.

Disc 2 contains about 9 Gigs on 12 files (9 x .swm files; 2x .crc files; 1x data.ini).

All suggestions appreciated


Answer:Satellite L300 - how to install purchased recovery discs?


I don?t know why you have received two disks but if the installation from the first disk went smoothly then everything should be ok and you should be able to boot the notebook and should be able to finish the Vista installation.

Did you finish the Vista installation successfully?

3 more replies
Relevance 66.83%

Blue screen first appeared after having a few problems. I tried to reboot to factory settings which did not work, so I ordered the recovery media from Toshiba. After following the instructions that appeared it finally said to wait while windows was installed, after a few minutes this appaears:
'Windows can complete the installation. Restart the installation'

I've tried this 6 or 7 times now and I am getting no where. I would really appreciate some help if possble.

Kiki :)

Answer:Satellite L300-217 - Recovery disk can't complete the installation


Before we start a long discussion, can you install Windows from a normal Microsoft disk? Just to test if it?s a hardware malfunction or not.


5 more replies
Relevance 66.83%

I had a Satellite Pro M40 with XP Pro that died completely (hard drive). I have the recovery disk.

I now have two more laptops - an Equium and a L300, both with Vista. I would like to install XP on one of them (preferably the L300). Is it possible to do so using my M40 recovery disk?
A bit of googling suggests that differences in the size of the hard-drive can be an obstacle. My M40 drive was 40GB, these new drives are much bigger.

Has anybody tried this or have advice?

Answer:Will Satellite Pro M40 recovery disk install XP on Equium or L300?

This will not work. Before the recovery procedure starts the notebook will be identified. If the ?code? on recovery media doesn?t match code on the notebook the installation will be stopped.

SP M40 recovery on L300 ? no way.

2 more replies
Relevance 66.83%

Hi all,

I have to re-install Vista (on a Toshiba Sattelite L300) running the "recovery disks" created by Toshiba recovery-disk-creator before and using a brandnew disk (Toshiba MK2035GSS, 200GB).


1) Have I to partition and to format the new disk BEFORE starting with recovery disk(s) / DVD(s),
or will that be done by the recovery process ?

2) What is the reason the current disk is divided in two equal-sized partitions C: and D: , whereas
partition D: seems to be reservered for the system, but only 5 GB are used ?

3) What is the purpose of the 3.partition ("inactive") with approx. 1.5 GB space ?

Thanks in advance for your assisstance and help !


Answer:Satellite L300; Questions regading Vista recovery on a new HDD

> 1) Have I to partition and to format the new disk BEFORE starting with recovery disk(s) / DVD(s),
or will that be done by the recovery process ?
No because the HDD would be formatted during the recovery process.

> 2) What is the reason the current disk is divided in two equal-sized partitions C: and D: , whereas
partition D: seems to be reservered for the system, but only 5 GB are used ?
On the D partition you can find the HDD recovery folder and files. HDD recovery allows you to recover the notebook from HDD and in such case you don?t need the recovery disk

> 3) What is the purpose of the 3.partition ("inactive") with approx. 1.5 GB space ?
This is a Vista partition and is need for backup files. Vista is able to repair the OS if something will go wrong? for this the files are needed which are stored on this partition.

4 more replies
Relevance 66.83%

Hi I just installed Windows 7 on this standard Satellite L300-18D Laptop. I'm a computer novice really.

Anyway there is a HDD recovery file reserved by the OEM of Toshiba which I have been using occassionally to restore my computer to factory conditions whenever my Laptop becomes too slow or infected with a virus. But It restores Vista.

Since I have Windows 7 now, is there a way to do a system recovery straight to Windows 7 instead of Vista then Windows 7? The only way I'm aware of doing this is creating a system image from control panel (backup and restore) but it takes 25GB which is too much data to store. Can I replace the OEM Vista HDD recovery partition with a Windows 7 recovery one? The Toshiba HDD Recovery file only takes 4.68GB as compared with 25GB for a self-created Windows 7 system image.

Anyone know a solution?

kind regards

Answer:Satellite L300-18D - Can I create Win7 System recovery?

> Can I replace the OEM Vista HDD recovery partition with a Windows 7 recovery one?
No. Something like this is not possible. Original Toshiba recovery image cannot be changed.

All you can try to do is to make own Win7 installation and create own image using some third part software like Acronis.

2 more replies
Relevance 66.83%

My daughters Satellite L300 was giving problems that seemed to be hard drive errors.
I've installed a new hard drive and tried to reinstall vista from the Product recovery CD.
The partitions are successfully created and then I get an error "restoring C:\program files\adobe\acrobat ...etc several time followed by

"error restoring image"

"The file or directory is corrupted and unreadable"

"ERROR Imagex could not apply VISTA F:\06235XSP.svm Index 2 from ODD to c:\!

"press any key to continue"

And that's thye ned.

Any ideas

Answer:Satellite L300 - can not reinstall Vista using Recovery disk


Hmm? looks like the notebook cannot restore the OS from the recovery image?
To be honest I?m not quite sure why this error appears but possibly it?s related to the new installed HDD.

Maybe you could format the HDD again using an clean Microsoft Windows CD (Win XP, etc?).
Boot from the Win CD and format the HDD.
Then go back to the recovery disk, boot from the recovery disk and try to install the OS again?

Maybe it would work?

5 more replies
Relevance 66.83%


I had a blue screen - dont know what error message was and then shut down .
I have carried out the recovery process to get back to an out the box computer but when i start up I only get as far as desktop and then " windows explorer is not responding "

Has any one any ideas ?

Also if it is a hard drive failure can I easily replace the hard drive and boot from my recovery discs


Answer:Satellite L300-215: windows explorer is not responding after recovery

>Also if it is a hard drive failure can I easily replace the hard drive and boot from my recovery discs
Yes, its easy to replace the HDD.
You will need an SATA 2.5? HDD for this notebook.

But i recommend checking the HDD firstly using an tool called Drive Fitness Test... use google to get this software

Here you can find some examples how to replace the HDD on different notebook models:

1 more replies
Relevance 66.83%

Hi, i recently purchased a laptop from toshiba*

I accidently deleted the folder on my 'data' drive via formating the drive.
I was told i needed that folder within the hard drive to create my recovery disk

Now that folder is gone.
Is there any way in which i can still CREATE the disk or DOWNLOAD/AQUIRE the folder to use for the recovery process to create disk ??
Without resorting to paying for a new disk - [ which costs nearly &pound;30 !!

Please try to help as i am stuck here ...


Answer:Satellite Pro L300-152: Deleted reocvery folder - But need Recovery DVD

Bad news buddy.
Without the recovery folder you will be not able to create the Toshiba Recovery disk.
Unfortunately but it looks like you will have to order the Recovery DVD.

HDD formatting was a bad move :(

2 more replies
Relevance 66.83%

Last year I had been getting blue screen of death for a while and purchased on this site a recovery disc for my model of laptop. Turned out I didnt need to use it as it was a problem with Mcafee.
However just 6 months later my laptop started playing up, windows crashing, blue screen, etc

I thought I would use the recovery to clean it all up and start from scratch as there isnt really anything of importace on my laptop. I followed onscreen instructions and recovery from disc began, however it only got part the way through and then said it has failed. Resulting in lapton having no o/s or anything.

I have tried recovery from disc again and agin, but keeps failing.

I really dont know where I go from here. My laptop is just over 1 year old and i was over ?30 for recovery disc !!!

Answer:Satellite L300-1AQ - Recovery installation failure, no OS installed

Hi buddy,

Maybe it?s a hardware malfunction...

Have you already tried to install an OS from another disk? You can use a Microsoft Windows disk to install Windows. Maybe it will work and in this case only the recovery disk isn?t working properly (scratched or something else).

If the Microsoft disk doesn?t work too, I assume it?s a hardware malfunction. Therefore contact an authorized service provider. They can check your notebook.

2 more replies
Relevance 66.83%

Hey all,

My Vista is crashed, and i have not any CD with copy.
So, im looking for link with OS in german version..
I still got it my product key.

L300 - 13Y, model PSLB0E - 020Y01XGR
Pleas help me.

Answer:Re: Satellite L300: Vista crashed and no Recovery disk


You cannot download the recovery disk!
You can order this from here:

It?s not expensive? I guess it costs ~30Euros

2 more replies
Relevance 66.83%

After using the Recovery DVD I previously made to reinstall windows some programs like configfree were not installed so I had to download them and install them by myself, but the problem is that even RECOVERY DISC CREATOR is not installed, so does anybody know where I can download the RECOVERY DISC CREATOR for my laptop?

Model: Satellite L300-135
Model Number: PSLB0E - 02H01HAR

Answer:Satellite L300-135 - Where to download Recovery disc creator?


The recovery disk creator can?t be downloaded. It?s only preinstalled on your notebook and included in Toshiba recovery disk so that you could burn this disk again.

But I?m wondering? Are you sure that you have used the Toshiba recovery disk? Normally after using this disk contains this application.

By the way: What OS is installed now?

6 more replies
Relevance 66.83%

I am trying to create recovery disc for Sat L300-1AS,
I have tried a number of various DVD discs from top quality to DVD-R / DVD+R but each time when the system is verifying the data I get an error message 02016F-3C 00000000

What am i doing wrong please help as frustration is really beginning to kick in now


Answer:Satellite L300-1AS - error while creating a Recovery disc


The error appears die to not fully compatible DVD disk.

I created a recovery disk using the TDK DVD-R disk. Some people suggested it too.

I think it worth a try!

Greets and good luck

6 more replies
Relevance 66.83%


want to create recovery discs for my Satellite Pro L300. User manual gives instructions fro Vista but machine is shipped with XP Pro.

Can anyone help?

Answer:Creating Recovery discs on a Satellite Pro L300 Running XP pro

Can you please post exact model number? I just want to check specification.

Anyway, as far as I know this model was delivered with preinstalled VISTA 32BIT BUSINESS and WXP recovery DVD. Do you still have this DVD?

I?m not 100% sure but I think WXP didn't have option for recovery disc creator. The whole story has started with Vista.

2 more replies
Relevance 66.83%

I have a Toshiba Satellite L300-145 PSLB0E, and i havent the Recovery Cd.
I?d like to know how can i create a recovery disc.
The TOSHIBA Recovery Disc Creator application doesnt allow me to do so becuase the image of the software is not found in folder HDD Recovery. Is there any other way?


Answer:Re: Create a Recovery Disc in Satellite L300-145 PSLB0E


how do you mean with the recovery disc creator cannot find the HDD-recovery partition?? Did you modified something on the system or formatted/repartitioned on your harddisk?

Maybe you installed some new software? Please give some details about the recently installed applications or modifications which were done to your system..


5 more replies
Relevance 66.83%

I was just wondering about this.
Could i make ISO images of my recovery disks, i know i could just make some more copies, but i am learning how to create ISO images.
But i was a bit worried what would happen when i put a disk in the drive.....

Answer:Re: Satellite L300-1BV - creating ISO images of your recovery disks

This with recovery image is a little bit complicated and something like this is not possible.
All you can do is to create recovery DVD using Toshiba recovery disc creator or start recovery from HDD directly using Toshiba recovery option (F8).

You can do with this what you want but how you want to start installation later?
Sorry but I think it will not work.

5 more replies
Relevance 66.83%

I have a Satellite L300 and have made a few sets of recovery disks as from what I read some makes work and some dont and so far none have.

Insert disk 1, press power on button and hold F12 down until the option for boot comes up.
Select CD/DVD then dos type box appears with X:\windows\system32\cmd.exe - startnet.cmd
and in the box Waiting for ODD to become available...

You can add as many dots after that as nothing proceeds further - hence three sets of recovery disks on three different brands of DVD any advice would be pleaseing!


Answer:Re: Satellite L300 - Recovery disks made but wont run


According to your description, the system recovery procedure does not start up and the ODD cannot read the disk.

In your case I would recommend recover the notebook using the Toshiba HDD recovery.
You can start the procedure from HDD; press F8, choose repair my computer, Toshiba HDD recovery.
Now the system restore should proceeds?

After the notebook has been set to the factory settings, check if there is a firmware update for this ODD (CD/DVD drive). If yes -> update the firmware.
I know you have tried three different DVD brands but you should still try to create a recovery disk using another DVD disk? I?m using TDK DVD ?R and had good experience using it. A friend of mine uses Verbatim DVD?R and never had any problems?

5 more replies
Relevance 66.83%


I am dual booting (running Windows Vista & Win7) and if I delete Windows Vista can I reinstall Windows Vista with my recovery CD?
And I have another drive on my computer for recovery Partition so can I use my recovery CD to reinstall Windows vista if I want it back after I got rid of it and would it wipe my win7 drive or remove the duel boot?

My specs are:
Intel Pentium
Hard drive 160GB

Answer:Satellite Pro L300 - Can I reinstall Vista with the recovery disk?


The Toshiba recovery disk contains an image of the factory settings. That means if you use it you get back the settings from the first time that you have started the notebook.
So if you want Windows Vista back you must only use the Toshiba recovery disk.

But the Toshiba recovery disk wipes the whole HDD. That means you will lose everything and also your dual boot system with Windows 7. So backup your data first before you use the recovery disk.

I hope I could help you a little bit. :)


2 more replies
Relevance 66.83%

Just out of interest.
I have not tryed this, but i hered you can only make one copy of the recovery disks, using the toshiba disk creator.

I just thought it would be quicker to post this question, rarther than try it out.
I do know it costs 30 to get a copy of these recovery discs, which led me to think are these for people who have not created recovery discs or people who have lost there copy of the recovery discs.

I myself have only one copy

Answer:Satellite L300-1BV Can you only make one copy of the recovery discs

No, you can make as many as you want. But it will only work on L300's

2 more replies
Relevance 66.42%

I just buy a new Satellite L50-A-161 with 6 Gb Ram.
When i try to create the recovery disks (3 of 4.7Gb DVD) with Recovery Media, during the verify, after writing the first disk, I receive this error message:

Cannot read file:
D: \EFI \ microsoft \boot \bcd
(error code: 02014F - 20-00000000)

and the process stops.

Is there anyone thath can help me?

These are the spec of my notobook:
Satelliete L50-A-161, 6 GB Ram, Intel Core I7 3630QM-2,40GHz,NVIDIA GEFORCE GT740M 2GB RAM, S.O. W8 64bit.
Ask for more, if nedds.


Answer:Satellite L50-A-161 - Recovery Media fails in creat recovery disk

Hmmmm.... there must be some problem with recovery image.
When you open recover disc creator and if there is option for USB media creation please test it.

Maybe you will be able to create recovery USB stick.

2 more replies
Relevance 66.01%

Hi, after running fine for several months I shut my notebook down recently and when I went to boot it up again it told me there was an error with Windows and had to run the repair center.

Well after waiting for four hours and getting no-where I decided to use the recovery disks I got the last time I sent it away. After installing all the neccesary components it then told me it was installing Windows. After doing this for ten minutes I got a pop up block telling me that "Windows could not be installed on this hardware". After it shut itself down and I rebooted it told me the same message and suggest I reinstall so I tried the process again and it ended in the same result.

Whats the problem?

Answer:Satellite L300-215 - Recovery disk couldn't be installed on this hardware


I?m wondering... I never heard about such an issue.
If I understand you correctly, you got the recovery disks from Toshiba or have you created it yourself?

Maybe the recovery disks are not designed for this kind of notebook?
If you can test it with a Microsoft disk you should do this. Maybe it will work.

Furthermore it would be interesting to know if the mainboard of your notebook was exchanged before. Theoretically this could happen due missing DMI informations. In this case an authorized service provider can help you. :)

4 more replies
Relevance 66.01%

Can u please help me out.
If i got the installed factory default windows vista, then how can i create the recovery disk, and also can i create the recover usb-disk , so that i would be able to boot my system with that usb?

And also if i m having another same model machine, then can i use its recovery disk in the other machine having same model and OS.???
because right now I have two same toshiba machines model is Satellite L300-190.

Waiting for your response.

Answer:How to create Recovery disk using installed Vista - Satellite L300-190

I think this theme has been discussed a lot of time here in the forum.

You can create the Recovery disk using the Toshiba Recovery disk creator!
This tool should be preinstalled on your notebook if the notebook has been equipped with the HDD recovery option.

You could also try to restore the notebook using the HDD recovery option.
You have to press the F8 while notebook powering up and then have to choose the option called ?Repair my Computer?. Then new window should open and there you could choose the Toshiba recovery.

If you are unable to use the both procedures (HDD recovery and Toshibas recovery disk) then you could order the new disk from here:

That?s all

2 more replies
Relevance 66.01%

I have tried to create my recovery discs on my new L300 laptop. Whilst creating the disc i get the following error:
Failed to read the following file F:\ZZImg|09115XSP.swm (Error code: 020150-20-00000000).

Anyone know what this means, and how to fix this problem? I have a very basic knowledge of IT and haven't got a clue how to sort this out.

Any help would be greatly appreciated. Many thanks in advance.


Answer:Re: Error message while creating recovery disc on a satellite L300

Hi mate

Yes, I know this error?
It appears because of usage not fully compatible disks?
I had the similar issue and could solve this using another DVD from another manufacturer.

Check this? it will help your too..

4 more replies
Relevance 66.01%

My Satellite Pro L300 PSB15E Series died!

No recovery using either recovery DVD disc or system restore.

Have original licence details and need to reformat disc and do clean reboot.

Toshiba original image is cleanest way.

Any ideas?

More replies
Relevance 66.01%

Please Help...

I'm trying to restore orginal settings through recovery process.
Having pressed F8 at the booting stage and chosen to recover the system it thinks about it and then comes back with the following error;

STATUS: 0xc00000e9
INFO: An unexpected I/O error has occured

There is also an explaination that it may be due to an external device that has not been disconnected properly or a hardware error.

I do not have anything connected and have re-booted the system several times to try to resolve the issue. I've also tried to re-boot to the last safe configuration but this has not helped (although has now given my sound card back to me as this along with any other issues have been a problem - hence the desire to recover the original system settings).

Any advice would be greatly apprciated.


Answer:Satellite L300: Recovery failure - unexpected I/O error has occured


Lets summary;

- You are not able to boot the Windows OS (even using safe mode)

- You are not able to recover the notebook using HDD recovery option.

- You don?t have a recovery disk

Well? in such case I don?t see any other solution as to order new recovery disk and then to try to recover the notebook using this disk.

You can order the recovery disk here:

2 more replies
Relevance 66.01%

I have been trying to create recovery discs for my new L300 but after few minutes the programme stops and getting error Messages (not matching boot.wim). Again I tried to create through other branded DVDs like Philips DVD-R, Imation DVD-R, Sony DVD+-R etc.
Can you please help on this?

I cannot find the Verbatim and TDK DVDs in our nearest market for trying those brands too.

Answer:Satellite L300 - Error message if I try to create a recovery disk


I have a Satellite L300 too and didn?t have any problems to create the Toshiba recovery disk. I used a Verbatim DVD-R media and generally I made the best experience with these DVD manufacture and DVD-R types.

In your case I would try this DVD media or the TDK DVD-R disks. If you can?t find it on the nearest computer store you can also order it online. Have a look on Amazon or eBay, there you can order such medias.
It?s worth a try! ;)


2 more replies
Relevance 66.01%

Good evening

I have a Satellite L300. A month ago, I bought and install an upgrade for Windows 7 (I had Vista). Yesterday night my laptop was working fine and this morning when I opened it I got this error :

BOOTMGR is corrupt. the system cannot boot.

I did some research and tried to boot on the recovery disk. The laptop read the disk I get the Windows is looding files screen and then a Microsoft Corporation appears with a bar above it and then I get a blue screen that say :

process1_initialization_failed vista

Now what can I do to reformat my computer and reinstall it if I cannot load the recovery disk!!!

I tried to put my Vista DVD that I have for my other PC but I get another black screen error...

Can someone tell me what I can do now?

Is it because I have a recovery CD for Windows Vista and not 7?

Answer:Satellite L300 - Cannot enter in Windows and Recovery disk will not booth

Ok so I have read several post here and the only thing I can't think of is the hard drive... but it had already been changed a couple of months ago by Toshiba... now my laptop is no under garantee anymore with Toshiba but I have an extended waranty with my VISA... if nobody have a clue here I will try to bring it where they changed by HDD last time...

2 more replies
Relevance 66.01%


I have a Toshiba Satellite L300-139 (Vista, 160GG, 2GB memory).

Hard disk has been damaged (when booting Vista, systems does not start at all, and every time only a blank screen with the mouse arrow is shown --> tried all choices + PE boot etc. but there is no access to the Recovery Console) and there is no possibility to run CHKDSK to fix this problem.

No recovery disks were created when the computer was new.

I removed the laptop hard disk and plugged it in to my desktop computer, but 2 partitions out of 3 were damaged and I managed to recover some data including:

c:\program files\TOSHIBA

Recovery of the data was done by using and external USB hard disk.

I copied all the data to the USB disk and started the TRORDCLauncher program (run as Administrator). All it does it removes my DVD-drive from vista and then fails with error (rough translation):
"Other process is using the drive or there is no drives available. Check the drive status. [OK]"

It seems that Recovery Images have been created with Windows PE Tools 2.0 (Imagex), but as the data is spreaded around the folders I have not been able to create the recovery disks manually.

Any Ideas and knowledge how to create the recovery disks with this data what I have or do I have to order the DVD's and wait for couple of weeks before getting the system up again?



If someone knows a nice solution for executing Microsoft CHKDS... Read more

Answer:Creating Recovery disks without the possibility to boot -Satellite L300

Sorry but there is no chance you can create recovery DVD. Recovery DVD can be created if you use ?Toshiba Recovery creator? tool only and unfortunately there is no way to get it.

HDD recovery procedure using F8 can work only if the HDD configuration is not changed (new OS installed), the HDD recovery folder must be placed on second partition.
So with short words, you can do this just if the notebook has ?factory settings?. Now you cannot do anything but order new original recovery DVD for this notebook model.

If you want to do this you can order it under


1 more replies
Relevance 66.01%

Hello all,

I have a Toshiba Satellite Series L300 (2008 model) laptop which originally had Vista but I installed Windows 7 Professional on it. I now wish to return back to Vista.

I noted that the 'Windows.old' folder created on the C:/ drive seems to be missing a lot of files and could have been altered since the date it was created. I think it would be too risky to use it to recover back to Vista.

So my question is can I use my original set of Toshiba Recovery DVDs to get back to Vista? I want to do a full factory reset to recover my system to when it was originally purchased with Vista.

If the Recovery DVDs is not an option and the only was is by using the Windows.old folder, if it is lacking important files could it leave my system corrupted? I am sure there is a way to get back to Vista by factory restore somehow.

Comments and feedback urgently required!

Thanks in advance.

Answer:Satellite L300 Windows 7 back to Vista with Toshiba Recovery CDs

> So my question is can I use my original set of Toshiba Recovery DVDs to get back to Vista?
Definitely. Only using original recovery discs you will have ?factory settings? again.

8 more replies
Relevance 65.6%

Hi all,

I just bought an L300 model number PSLB0C 08R08C.
I was unable to create a recovery disk, I was getting error message saying it can't create the disk because it's scratched or has dirt on it, I wasted 5 brand new DVDs.

I went to the store and replaced it with another unit, but got the same problem (I have not tried another DVD brand though)

Second issue with this unit, the screen flickers once every time it comes back from an off state.
3rd issue, the wireless card disappears from the device manager, until I restart.
Laptop was made in China ;-)

Any suggestions are much apprecaited

Answer:Screen flickers on Satellite L300 and I'm unable to create a recovery disk

Hi there,

that is indeed strange that you were unable to create a recovery disk, and that the problem recurred even after swapping the laptop with another unit from the store. however, if you have not tried another DVD brand then i would suggest doing this if the laptop is claiming the disk is scratched or has dirt on it. i am unsure if toshiba actually manufactures blank DVD's but if they do, this would be a starting point, as it would be expected toshiba hardware would work happily with their own branded DVD media. however, if you cannot find toshiba dvd then use another trusted brand, e.g. Imation or TDK. with my experience, i have tried many brands of DVD's and have found TDK to be very reliable.

with regards to the second issue, this may be related to the graphics card in the system, or could be due to the performance of the laptop itself. check that you have the latest driver for your graphics card and that all computer settings are optimised/hard drives are defragmented and junk files removed. with your third issue, this issue could also be related to driver problems, again check your regional toshiba drivers website for the latest drivers. failing this, i would suggest backing up your data and then restoring back to a factory state, then installing updated drivers immediately. i hope this info can help you in some way.

welcome to the forums, and please leave helpful points or correct answer points for any helpful advice that has been given in response to your... Read more

8 more replies
Relevance 65.6%

My Satellite L300 is 3 months old and a couple of days ago I had to resort to using the 4 recovery DVDs.
After several hours I get an Error: 10-FA1Z-045D message. I have made 3 attempts and get the same message each time.

Any suggestions?

Answer:Satellite L300 - recovery ends with error message: 10-FA1Z-045D

My only suggestion to this is you should contact nearest authorized service provider as soon as possible. I don't know for sure what the problem can be but it must be either HDD issue or some problem with recovery image.

In both cases you will get free service and if necessary service can order new recovery installations DVD for you.
Don't wait too long and vase your time with it. Call nearest service tomorrow and talk with them.

3 more replies
Relevance 65.6%

My niece asked me to re-install her Toshiba Satellite L300 laptop, because the windows installation is rather buggy. She didn't have a recovery disk. Using Toshiba's Recovery Disk Creator I tried creating a recovery disk.

However, the program wouldn't start. Checking the directory of the program, it would seem that the program simply isn't there. Afterwards, I checked the data partition of the laptop.

There was a map with HDD recovery. However when using Windows' advanced boot (F8 before Windows startup) there was no choice of repairing the notebook. They only choices were the standard windows options (Save mode, normal start, etc.).

In short, it seems impossible to re-install the notebook with the current information at hand.
What would be the next course of action? Is it possible to order a recovery CD from Toshiba?

Another niece has the same notebook, would it be possible to use that notebook to create a recovery disk?

I'll appreciate and look forward to your reactions.

Answer:Recovery disk Creator & data partition won't work - Satellite L300


It looks like something has been changed on the HDD?
However, fact is you?ve no Recovery disk and you cannot use HDD recovery option.

This means you need to order a new Recovery disk from Toshiba.

You can do this here:

PS: one tip? if you would use a search option of this forum, you would find the right answer too ;)

2 more replies
Relevance 65.6%

I get error 0xc000000f when restarting and if i try the recovery disk i get error error: 10-FC12-0241
operating system is vista business and laptop is toshiba L300 PSLB1A - 02S008

Answer:Satellite Pro L300 PSLB1A: Recovery disk not working - 0xc000000f error


You mean you cannot boot the notebook using the Toshiba Recovery disk which you have created?

Go to the BIOS and check if the CD/DVD drive is recognized. It should be listed on the first BIOS page.
If the CD/DVD drive is not listed then you should set the SATA mode to compatible and should save the changes.
After that try to boot again from the Recovery disk.

I also searched on the Toshiba European driver page for some info and found some details;

There is a firmware update for CD/DVD drive TS-L633A and TS-L633P.
This Firmware solve "Sometime not able to writing on DVD+R media".
The issue happens only DVD+R media, other kind of media have no problem.

5 more replies
Relevance 65.6%

Hi Everyone,

I?ve created the Toshiba Recovery Disc (s) and think I need to use them now. My Satellite L300-1AQtaking AGES to load when I power up, it sometimes freezes for no obvious reason (It's telling me memory is OK, so not a RAM problem) and does other odd little annoyances.

Should I use the Recovery discs do you think? Is it straight forward? Does it give step-by--step instructions please? OS is Vista.

Many thanks


Answer:2 Years old Satellite L300 started playing up - Recovery Disc question

Yes, you should use recovery discs and make clean OS installation. After 2 years of usage I think the OS should be ?refreshed?.

After clean OS you will see that notebook will run much better than before.
Please optimize also OS: remove all useless stuff from the system and configure Windows start-up. This will make start-up much faster.

4 more replies