Computer Support Forum

Satellite L500-12T System Recovery from Recovery Disks

Question: Satellite L500-12T System Recovery from Recovery Disks

Stop 0x000000001A *Memory_Management* Blue Screen during recovery.
Please help.

Relevance 100%
Preferred Solution: Satellite L500-12T System Recovery from Recovery Disks

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Satellite L500-12T System Recovery from Recovery Disks

First recovery or first notebook start?
HDD or DVD recovery?

1 more replies
Relevance 81.2%

Hi,

I have a problem creating recovery disks for the Satellite L500-126.

I am using the Toshiba recovery disk creator.

The 1st disk is ok.
When I try to make the 2nd disk, the systems stops exactly at 50% of the 2nd disk. and no more reaction from the disk creator.

I tried 2x, and each time i had to abort and throw away the dvd's.

any suggestions?

Answer:Problem creating recovery disks for the Satellite L500-126

Hi

You should try another DVD from different manufacturers?
It?s nothing unusual that some DVDs are not fully compatible and that the CD/DVD drives cannot write the data properly?
I had such issue in the past and could solve this testing and using different DVDs.

2 more replies
Relevance 79.46%

Hello,

My pc start acting up after i made a system restore.For exemple i cant use the fn key function.

Last week i decided to format my pc. But when i opened the TOSHIBA Recovery Disc Creator i got an unespected error 0D00F6-49-00000001.

I mananged to create 2 of the 4 dvd's. Im using Dvd-r from memorex.
Can someone help.

Thank you in advance for your help.

Answer:Satellite L500 - cannot create recovery disks - 0D00F6-49-00000001 error

Is this the first time you try to create recovery discs?

How you have created 2 discs if the Toshiba recovery disc creator starts with error?

Anyway, in this forum you can find similar threads. Probably is some recovery file corrupted and disc cannot be created.
I don?t think there is something you can do about it. Either it works or not. Maybe you should contact nearest Toshiba service and explain the situation. I hope they can help you with this and order original Toshiba DVD disc for you.

2 more replies
Relevance 104.14%

Hello,

Could someone please tell me what I can do after the process of Product Recovery.
I made Recovery Media 1, Recovery media 2 and System repair disc Windows 7 64-bit much earlier when I bought the laptop.
But where do I put these files which are on the DVDs and especially how do I get the 64-bit icon back into the laptop?

Answer:Satellite L500: What to do with the system recovery disc for 64 bit?

Hi

The recovery disk which you have created helps you to set the notebook back to the factory state.
This means that you will get the same state like at the first day of purchase.
The HDD will be formatted and you will get the Windows OS, tools and drivers?

Greets

7 more replies
Relevance 104.14%

Used Toshiba product recovery disks to recover system on new hard drive in Toshiba L500 PSLS3A-04M002.

During recovery, Windows complained 'Windows can not verify the digital signature for this file' - file is LPCFilter.sys.

Also while setting up drivers, Windows made the same complaint about Realtek High Definition Audio driver and a Virtual WiFi Filter Driver (from Microsoft Corp!).

Following the restore, if I start Windows normally, the Windows startup repair starts automatically with a title "Your computer was unable to start". The startup repair takes a while then comes up with a message "Startup Repair cannot repair this computer automatically".

If I press F8 on startup, and choose the option "Disable Driver Signature Enforcement", Windows starts without any problems.

I thought doing a Windows Update might help but when I click on "Check For Updates" button I get a message "Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer." When I look in Services I see that the service is running.

I don't want to press F8 every time I start up and don't think it's a good idea to do it anyway and would like to be able to update Windows.

I would appreciate any help.

Answer:System recovery problems on Satellite L500

Have you created this disc on your own or you use original toshiba disc?
Do you use it for the first time?

4 more replies
Relevance 102.09%

I just purchased a brand new laptop and have realised that it didn't come with a recovery disc or a recovery partition on the hard drive.

Just wondering if my hard disc crashes how am i supposed to reinstall windows?
The laptop i bought is a Toshiba satellite L500 and is only a few weeks old.

If anyone could help on the subject would be very much appreciated.

Answer:Satellite L500 - No recovery disc or recovery partition - How to reinstall?

Hi

Normally if I buy a new notebook or other product I read the user manual firstly. So I would recommend that you should the same before you ask different questions.

The point is that you have to create a Toshiba recovery disk yourself. Therefore start the recovery disk creator that is preinstalled on your notebook and follow the screen instructions. I recommend a high quality DVD-R medium to create this disk.

Furthermore you can reinstall Windows using the HDD recovery option. On the second partition you can find this folder that contains an image of factory settings and you can start this feature if you go in advanced boot menu and select ?repair my computer?. This is not a special partition, only a folder where the image is stored.

HDD recovery procedure is the same as Toshiba recovery disk. You get back factory settings too but the recovery disk wipes the whole HDD. The HDD recovery only the first partition.

By the way: Normally you did get this message:
+Important INFORMATION+

+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+

+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
... Read more

2 more replies
Relevance 98.81%

Anyone from Romania with a Satellite L500-126?

I had a problem with my Vista oem and I want to reinstall it and don't have recovery disks.

Thank you

Answer:Satelllite L500-126: I want to reinstall it and don't have recovery disks

Hi

Satellite L500-126 was delivered without the recover disk but with the HDD recovery option! This means that you can recover the notebook without the usage if Recovery disk.

Start the notebook pressing F8.
Choose the function: Repair my Computer and then new window will appear.
Then you would get new option with recovery HDD

Should work?

2 more replies
Relevance 96.76%

Hi,

I have SATELLITE L350D-212 notebook with windows 7 home premium OA.
It started to complain that there was something wrong with the harddisk so I went and bought another harddisk of same size.

I have created the recovery disk when the computer was bought and have backup of all the data in external harddisk.

After I changed the new harddisk to the notebook and tried to boot from recovery disk nothing happens eventhoug I can see that there seems to be everything Ok with the disk.

Any ideas on how to get the recovery to run for the new harddisk?

I have the old harddisk attached as external disk via USB but can't boot from that too. It just stops at some point and says to shutdown.

Answer:Satellite L350D-21 Problems using recovery disks to recovery to new HDD

Hi

Usually the recovery disk should format the new HDD but I would recommend to attach the new HDD as an external device to another computer and to format this new HDD before trying to recover the notebook.

After the HDD has been formatted, connect it to the L350D and boot from the recover disk?

Good luck

8 more replies
Relevance 95.12%

My Laptop came preloaded with Windows 7 Home Premium and I would like to create system recovery disks. I have a drive labeled RECOVERY (D. How do I create recovery disks from this drive?

Answer:Need to create system recovery disks from RECOVERY (D:) drive

We know nothing about your laptop, so it's hard to say. Who made it?? What model?

You probably have to access some program, either from a choice in your list of programs or through a particular keystroke during the boot process. Look in your list of available programs for something related to recovery or consult your manual.

9 more replies
Relevance 95.12%

The 500 GB Samsung Hard Drive on my HP Pavilion a6500f PC running on Windows Vista Home Premium (64-bit) crashed. I bought and installed a new 500 GB Western Digital Caviar Blue model WD5000AAKS hard drive on the PC. I ordered recovery disks from HP using the computer's serial number and confirmed that the Build ID on the recovery CDs and the sticker on my computer match. However when I attempt to recover the system Windows loads the recovery files and then I get the error:

"This PC is not supported by the system recovery discs. You will not be able to recover this system with these discs."

I have tried 2 sets of recovery discs from hp and get the same error. I have attempted to use the Cyberlink Recovery Disk Utility from hp http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&lc=en&dlc=en but it fails. This Utility only supports Windows 7 per the hp page.

I would appreciate any help on how to move forward. I am new to this site so if I broke any rules please feel free to correct me. Thanks.

NYATI

Answer:System Recovery Fails with hp Supplied Recovery Disks

How much did you pay for your recovery discs and is it refundable? If you the recovery disc costs more then $100, you would be better off purchasing a copy of Windows 7 which is far more stable and a less of a memory hog.

8 more replies
Relevance 95.12%

Hi,

Well, for the first time in 8 years I had to do a system recovery using the disks i created when i first bought my l300-13s using the Toshiba Recovery Disk Creator.
I had inadvertantly deleted the HDD Recovery partition when i set out to do a clone using a bigger HDD.

What I want to find out is instead of making recovery disks to DVD can i make a recovery USB flash drive?

Thanks

Peter.

Answer:Satellite L300-13S - Recovery USB instead of Recovery DVD Disks?

When you open Toshiba recovery media creator you can see options which media can be created. I?m not 100% sure but I think on old L300 there was option for recovery DVDs only so I think you cannot create recovery USB.

5 more replies
Relevance 90.61%

Hi

I would like to restore my Toshiba back to the factory settings.

I have tried to press F8 during startup to acces repair menu, but the recovery wizard is not an option.
I have tried pressing 0 while starting up but no recovery wizard there either.

I can see the HDD folder at the drive E: but there does not seem to be an option for starting recovery there eihter

Any suggestions what to do?

Answer:How to use HDD recovery on Satellite L500?

Do you use original preinstalled OS hat you got with your notebook or own OS version?

Have you created recovery discs? If yes, use these discs for recovey image installation.

3 more replies
Relevance 90.61%

Hi I have a second hand Satellite L500-1XC, the previous owner has installed Ubuntu (which I can't access due to password) as well as windows 7 and I'm trying the laptop restore it to factory settings but I just don't know how.

I've tried turning it off and then holding 0 and pressing the start button. On start up the bottom of the screen does say HDD Recovery at the bottom left of the screen but after that it just goes to the selection part for me to pick either Ubuntu or Windows 7 and then just loads the laptop as normal.

I have tried looking for the Recovery Media Creator but I can't find it. It seems many of the original Toshiba utilities and supports have been deleted.

If anyone can help me to fix this laptop I would be so grateful as I really can't afford to buy a recovery disk from Toshiba.

Thanks

Answer:Satellite L500-1XC HDD Recovery help

> I'm trying the laptop restore it to factory settings but I just don't know how
I don?t think that HDD recovery would work because the Linux has been installed on the HDD and I think the partition table has been changed.
This might be the reason why the HDD recovery isn?t working.

You could still check this Toshiba document which describes the whole HDD recovery procedure:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

So now HDD recovery does not work? in this case you can use only the installation disk.
You can try to install Windows 7 using Microsoft disk (the Toshiba drivers are downloadable) or you will order the disk from Arvato:
http://backupmedia.toshiba.eu/landing.aspx

4 more replies
Relevance 89.38%

Well I got this laptop two days ago and used it once after installing fire fox and my mobile broadband drvier's and going back home to boot up and find it was going to happen,

I had tried safe mode (all three) and repair and all I got was a black screen with the cursor up where there should have been a language screen (I used the recovery disk that came along with the laptop) so anyway after finding out I wasnt going to be able to repair it I tried to install but of course that didn't work either so I put my XP 64 bit OS on and worked perfectly fine, then I upgraded (using my own upgrade windows 7) and that works fine no problems, so I tried again with the original windows 7 that came pre-installed on the laptop's hard drive and all went find untill it starts installing driver's or updates (I'm not 100% sure on this but it is at and/or after the face recognition installation,

Then it shuts it's self down and boots back up to automatically restart and asking me if I want to repair due to a bad start-up so I do the repair boots back up and still says I need to repair and finds nothing wrong and carrys on in that circle.

Now I have been told that it could be the register or it is a graphics problem, I myself am getting pretty fed up of having to install/reinstall/format this laptop.

So if there is anyone who know's what is wrong or what to do or even if it needs to be sent back to be fixed that will be very helpful.

I thank anyone in advance.

Happy new ye... Read more

Answer:Satellite L500-19X - Can't use the recovery disk

Hi

Well, I think it?s really hard to say what the reason is. Maybe the recovery disk is scratchy or the files corrupt there.

At the moment I can?t imagine that it?s a hardware problem because other Windows disk working properly.

In your case I would try to install Windows 7 from a Microsoft disk and then see what happens. If it works properly and you can install all drivers & tools you should order a new recovery disk from Toshiba directly.

Bye

2 more replies
Relevance 89.38%

I have this laptop with 3 Partitions

The main partition got corrupted and apparently wiped so all windows folders have been deleted and a low level format carried out

I still have the recovery sector

Just wondering how to reinstall it back onto the main partition

I tried F8 and it took me to a screen to choose language but after that it said "You must log in to access system recovery options"

I guess user data has been wiped from the main partition ?

Are there any other keys to press on startup to access the Recovery partition ?

Thanks
 

Answer:Toshiba Satellite L500 Recovery

6 more replies
Relevance 89.38%

Excuse for my very bad English at first!!!

I want to reinstall Win7 but the HDD menu recovery in the screen (Boot, F8, Repair , ...) is not present on the menu.

If you don t understand my question, can u send me the web address of the French forum?

Thanks

Answer:Satellite L500-13Z - HDD recovery is not present

Hello

At first I must say that your English is good and understandable.
So, back to your problem.

If ?Repair my computer? option is not available in ?Advanced boot options? HDD recovery installation (from recovery image saved on HDD) is not possible.
It can be done with recovery DVD only.

Have you created recovery DVD following Toshiba advice and instruction how to do this?

3 more replies
Relevance 89.38%

hi all,

since yesterday my Satellite L500-20x have only Bluescreens called "Driver not Less or equal" --> Restart! He boots to win7 till login, after that EVERYTIME restart. I try a lot stuff to solve:
Systemrepair (3Times) and no changes
SystemRecovery (by HDD not CD) Recovery works but still bluescreens and no changes to fix the Problem.
Memory check (from Win7) checked it 3 Times all 100% ok.
Toshiba HDD Recovery (i try many times but he shut down EVERYTIME by bluescreen while Process... so i cant do this - unpossible to finish Recovery!)

Thats the first Notebook I every buyed and I never heard of a Recovery Disk - so I dont create one! Now I cant come into win7 - so I cant create it now. Anybody have any Ideas? I want windows new to install... but i dont have the same Win Disk. Notebook Win = Win7 64Bit all i have is WIn7 32Bit for my HomePC.

I need help!

Answer:Satellite L500-20X - No recovery disk

Hi beAm,

If you don?t have a Toshiba recovery disk you can order one from Toshiba directly:
https://backupmedia.toshiba.eu/landing.aspx

This would be worth a try if HDD recovery option doesn?t work properly.

If you order such a disk and install it the original factory settings on HDD will be restored. A clean factory installation will be restored with all drivers and tools (out of box settings) and if this doesn?t work it seems to be a hardware malfunction?

2 more replies
Relevance 89.38%

I have a Sattelite L500/nb I purchased in december.
I attempted to perform a HD wipe and system recovery the other day and it seems the recovery partition has been corrupted.
On boot the system states error: F3-F100-0004 and then shuts down on 'ok'

Can I obtain recovery cd's for this system?

How do I fix this?

Answer:Re: Recovery partition/help Satellite L500

What country are you in?

You can order Recover Discs from the Toshiba website.

2 more replies
Relevance 89.38%

Hello,

I have just formatted my laptop using Recovery Disc 1. On forums, it says after Disc 1, the menu will ask for Disc 2. But it never asked for Disc 2. Should I have inserted it right after it asked me to eject Disc 1?
I am writing this now on my newly set up Win 7. Everything seems fine but I wonder whether the lack of Disc 2 will cause any problem. Is there any way to boot my laptop also using the second disc?

Thanks!

Message was edited by: wawawa

Answer:Satellite L500 did not ask for Recovery Disc 2

> I am writing this now on my newly set up Win 7. Everything seems fine but I wonder whether the lack of Disc 2 will cause any problem. Is there any way to boot my laptop also using the second disc?

The second disk will be created only if the space on the first disk would not be enough! So the amount of recovery disk depends on the size of the image file.
If your notebook works properly, I would not be afraid about the 2nd missing disk :)

6 more replies
Relevance 89.38%

Hi all,

I just bought a L500 and I realised that my system is 64bit but the recovery disc that came with it is 32bit.
Does it make any differece at all? Should I contact Toshiba to get a 64bit recovery disc or is there any way I can create a recovery disc?

Thanks,

Vini Cruz.

Answer:Satellite L500 and recovery discs

Hey Vini Cruz,

I have checked the specifications from some Satellite L500 models on the Toshiba website and it seems that some are equipped with 32bit recovery disk and the preinstalled OS is 64bit.

If you want a 64bit recovery disk you have to create it by yourself using Toshiba recovery disk creator. It creates an image of factory settings from 64bit OS that is the same as 32bit but only 64bit ;)

For further informations check also the user manual chapter 3.

2 more replies
Relevance 88.56%

I have this laptop with 3 Partitions

The main partition got corrupted and apparently wiped so all windows folders have been deleted and a low level format carried out

I still have the recovery sector

Just wondering how to reinstall it back onto the main partition

I tried F8 and it took me to a screen to choose language but after that it said "You must log in to access system recovery options"

I guess user data has been wiped from the main partition ?

Are there any other keys to press on startup to access the Recovery partition ?

Thanks

Answer:[SOLVED] Toshiba Satellite L500 Recovery

Quote:




If the computer is running, shut it down by clicking start, then shut down again.
Press and hold "0" (zero) key on your keyboard and then depress the computers power switch. When the computer turns on, the Toshiba HDD Recovery Uitlity Screen will appear, presenting 3 options, just choose Restore Original Factory Image.
Press 1 to restore your hard disk drive to its original factory default. A confirmation message will appear, indicating that all data will be overwritten and lost during the restore process. Be sure to back up all important files before proceeding.
Click Yes to begin restoration, A message will appear once the operation is finished, indicating that the HDD has been restored.
Press any key to restart the computer.

19 more replies
Relevance 88.56%

Hi,

on my Satellite L500-1UR ce two DVD I created and the Windows 7 home premium 32bit given with the PC don't work ..
In both cases, the restauration process seems to work correctly but the finishng phase never ends .. boot, reboot, rereboot .. and so one.

Reinstallation using a "standard" Windows 7 32 bit seems to work .. but .. I am afraid I could have lost something.

How to get "correct" DVDs ?
Thanks for help

Answer:Recovery DVD Creation does not work on Satellite L500-1UR

Hi

Please check if you could create the recovery disks using another DVDs from different manufacturers.
I had the same issue in the past. I tested some DVDs from Verbatim and TDK ?R and could create the recovery DVD.

Greets

3 more replies
Relevance 88.56%

I need to get to the option "Recover to factory default software with user's data" but I'm having problems getting to this stage.

I've tried power + 0 with no luck, same with power + f12.
When the boot menu comes up, HDD Recovery is not there as an option to select.

I need the exact option above but I have no clue how to get it. I have the option of selecting "Toshiba HDD Recovery" at startup repair, but will it have that option if I go further into it?

So far I got up to the screen that warns about unpacking the system image partition but don't want to go further in case that option is not there.

Can anyone help? :/

Answer:Satellite L500-1ZC - cannot start the HDD recovery menu

I have the option of selecting "Toshiba HDD Recovery" at startup repair, but will it have that option if I go further into it?



Toshiba HDD recovery sets the notebook back to factory settings! This means that your system partition will be deleted and you will get the same HDD state like at the first day of purchase.

Therefore you should backup the date before performing the recovery process.

5 more replies
Relevance 88.56%

I have got a Satellite L500-13w and it came pre-installed with Windows Vista and the recovery files, but I formated the PC and installed Windows 7 and then installed XP.

Now I want to use the system recovery to get back to Vista but I didn?t create a Vista recovery CD using the files that came on the separate partition.Though I still have does files in the place they came.
So my question is, running Windows XP, is there a way to use those files to create the recovery file or CD?

Please reply

Answer:Satellite L500-13W - Creation of recovery disk possible on another OS?

Hi Nagravison-PT,

Unfortunately this is not possible. The Toshiba recovery disk can only be created on preinstalled OS because only there the recovery disk creator is installed.

The recovery files on second partition are now useless, because you can?t use the HDD recovery option anymore and recovery disk creator is deleted.

What to do now?
Either you use a Microsoft disk or you order a recovery disk from Toshiba:
https://backupmedia.toshiba.eu/landing.aspx

6 more replies
Relevance 88.56%

Can this be done?

I'm trying to restore my laptop to it's day of purchase (only a month today). From what I can see on the forum, I'm just one of a long line of us who has discovered that the version of our recovery DVD does not match the product we bought. Hence, I'd like to restore the 64 bit version (without the over-priced option of ordering recovery media which is scandalously over-priced compared to Microsoft's offering of 64-32 / 32-64 DVD switch for little over the cost of postage).


(((I'd be grateful for any ideas, however, I notice there is an unhealthy amount of 'experts' around who LOVE telling us consumers that everything is our fault. This brand of righteous 'help' is judgemental, condescending and above all - and most relevant to this forum -, is unhelpful. 'I just don't understand why you didn't back up 5,000 copies on the day of purchase'...etc. We all make mistakes, and if you've made one, you'll make on again. It's nice when the person we meet at that time doesn't point the finger of judgement)))

Answer:Satellite L500-1XL: restore to day of purchase using HDD recovery

> Hence, I'd like to restore the 64 bit version (without the over-priced option of ordering recovery media which is scandalously over-priced compared to Microsoft's offering of 64-32 / 32-64 DVD switch for little over the cost of postage).

The notebook came with preinstalled Win 7 64bit. Additionally you received the Toshiba recovery disk Win 7 32bit version.

Please take a look into the user manual.
It said that you can create an additionally recovery disk of the OS which was preinstalled; means Win 7 64bit.
There should be a preinstalled tool called Toshiba Recovery disk creator. This tool helps to create an own new Win 7 64bit recovery disk.
After you have created this disk, you could use it in order to set the notebook back to the same state like at the first day of purchase.

Greets

5 more replies
Relevance 88.56%

Hey guys. NEED HELP

How do i load windows 7 back onto my HDD with the recovery partition missing?
And no i dont have a copy of it just windows 7

HELP

Answer:Satellite L500 - recovery partition missing

Hi

If you didn?t create a recovery disk, then you will need to order the disk from here:
http://backupmedia.toshiba.eu/landing.aspx

Greets

2 more replies
Relevance 88.56%

Hi all

I have a Toshiba L500 -128, the original 320gb hard drive is simply too small and i would like to avoid buying an external hard drive (for any other purpose than backing up) because in my experience they are just rubbish and i want all my data on the laptop.

I wanted to buy a new 1 (possibly 2) tb hard drive to put in it, which i assume it is equipped to deal with, (please anyone correct me if they know otherwise) along with another 4GB ram....

Anyway what i'm really wondering is whether or not i can get away with using my recovery discs on the new hard drive.
If they did it the old fashioned way (sending a OS disc and a drivers disc) i wouldn't even question it but as i created the discs from the computer itself, i wasn't too sure as when i opened the discs up to make sure everything had burnt on to them ok, i didn't see anything like what i was expecting to.

Also i read somewhere that someone else tried this and it didn't work, they assumed because the recovery included an image specifically to fit the original sized Hard drive?

Can anyone shed some light at all please?

Thanks

Answer:Satellite L500 -128 Using recovery discs on new (bigger) HDD

Hi

First of all you should create the Toshiba Recovery disk using the preinstalled tool called Toshiba Recovery disk creator.
Usually you should receive an confirmation message that the recovery has been created successfully.
This would mean that you could use this disk to set the notebook back to factory settings not matter what HDD is in use.
This means that Recovery disk should work with other HDDs.

But note; the usage of such recovery disk would format the HDD and delete everything from HDD partitions. But this should not bother you if you use new, empty HDD ;)

5 more replies
Relevance 88.56%

Dear sir

I have a Labtop *TOSHIBA I3 L500* , in 2nd of April 2010 from one of market there in FUJERAH .

.Aafter 11 days *I installed uncompatable software with Windows7* so the blue page which content a warning massage says " Your software has been damaged " have been viewed then i deside to use the RECOVERY CD .

I was foraced to use the *Recovery CD* which found with Bag of Labtop but something strage problem founded which is :
The OS was stucked in the last step of installing exactly when _logging in_ , a warning massage was appeared "Please dont interrubt installing the windows and logging in ..please wait " , the the massage was disappeared then system were shutdown and logging again and so on .....etc

I created a nother Recovery CD's which have 2 DVD's , and the Problem was still the same .

I used a Copy of Windows7 to rebot from it and to install the windows7 .

*MY QUESTION IS :*
WHY THE RECOVERY DVD WAS NOT WORKING ??? despite I create a RECOVERY DVD from the which have 2 DVD .
I dont think there is an scratched in original Recovery DVD which sold with toshiba labtop !! because the Recovery DVD which I created from windows7 and the same labtop have the same problem .
Please help me

Answer:Satellite L500 - Recovery disc failure

Hi

If you have created the Recovery disk correctly ad if the procedure finished successfully then the installation from recovery disk should work.

I?m not quite sure why you are not able to recovery the unit using the recovery disk but you should check the BIOS.
Access the BIOS pressing F2 and you should set the settings to default.
Save the changes and try to reinstall the OS using the recovery disk again.

If this will not help then go to BIOS and set the SATA mode from AHCI to compatible and then try install the OS again.

2 more replies
Relevance 87.74%

Hi,

i have a Toshiba Satellite L500-F19, and recently started have a bad performance in the graphic interface and also started to shut down on its own.

In order to try and fix the problem i used the HDD recovery sistem by pressing F8 in the boothing process.
What happens is that this process failed and and now my portable computer doesnt even start!
What can i do?

I have a windows repair disc but it was only made a few days ago and this pc is in my possetion for 3 years now.
Is there any way i can recover my sistem back to the original?

Thanks
Jo?o

Answer:Satellite L500-F19 does to boot due to failed HDD recovery process

Yes, you can recover it to original factory settings. You can do this on one way only: you must use recovery DVD. Have you created this disc?

Please don?t mix Windows repair disc and recovery disc. At the moment you cannot repair anything. What you must do is clean recovery image installation.

2 more replies
Relevance 87.74%

Hello,

I have a Notebook Toshiba Satellite Pro L500-1T8 and its hard drive has been damaged, so I cannot recover the special partition (I've tried also with the 0-key bootup).

I haven't create a restore disk from windows 7 because nobody told me to do so!

I'd like to re-install my windows 7 licensed copy (at the moment I've installed an ubuntu linux).
How can I do?


Thanks,
Fabrizio

Answer:Satellite Pro L500-1T8 - How to install Win 7 if recovery partition is damaged

No way to recover a genuine Toshiba laptop? Is it true?

1 more replies
Relevance 87.74%

Am trying to re-install my Window 7 system on a Satelite L500-19Z. When I insert the recovery disc(s) it completes and then reboots.

When rebooting it goes through the 'system registry' and 'system settings' stages and then reboots. It thens says 'Setting up for first time use'.
Then it comes up with a basically white screen and the box saying 'finalising installation - will take a few minutes' etc.

However, after a while it just reboots and goes through the same sequence again - and again - and again etc.

I can reboot in SAFE mode but it won't allow me to make a System Restore point.
When I try to reboot normally it just goes straight back into the routine above.

I've tried a number of recovery discs but they all do the same thing.

Answer:Satellite L500-19Z - Recovery process not complete correctly?

> I've tried a number of recovery discs but they all do the same thing.
Does this mean that you have more recovery disk for this notebook model?
Did you use the right one?

I?m not quite sure why the recovery procedure does not finish successfully but it could be possible that your notebook?s hardware is affected.
What was the purpose for a recovery? Was something wrong with the notebook?

4 more replies
Relevance 87.74%

My new Satellite L500 - 19X came pre-installed with Win 7 - 64 bit version.
Also included was a "Product Recovery Win 7 32 bit" disc

Within the packaging was a leaflet saying:

"If you plan to use the 64-bit version at a later stage, please create a _recovery medium_ prior to installing 32-bit Windows 7"

It then cautions me to create a "64 bit recovery medium.....ordering a 64-bit recovery medium is not free of charge"

The manual goes on at length about "_System Recovery Options_" As instructed in the manual I have made a "Repair Disc Windows 7 64-bit" Am I correct in saying that I do not or cannot have an actual Win 7 64-bit disc?

The leaflet says "a backup copy (of the Win 7 64-bit) is stored on the hard disk drive as a _recovery image_" So is this the actual Win 7-64-bit complete disc that I am after, and if so how do I get it?

The Toshiba documentation is not clear, and I believe rather contradicts itself?

I am confused! Anyone understand what's going on?

JohnF.

Answer:Creating Win 7 64bit Recovery Disc for Satellite L500-19x?

Hi

As I understand you have received the Notebook with preinstalled Win 7 64bit OS.
But you didn?t get the Win 7 64bit recovery disk but you have a Win 7 32bit recovery disk. Is it right?

Well mate? the case is that the usage of the Recovery disk will format the full HDD and will erase everything from HDD. This means that you will lose the preinstalled Win 7 64bit OS.
So if you would not create the Win 7 64bit recovery disk BEFORE using the Win 7 32bit recovery disk then you will not be able to go back to 64bit version.

Therefore create the Win 7 64bit recovery disk at the beginning. Then you are safe and can install Win 32bit and 64bit whenever you want.

5 more replies
Relevance 87.74%

Hello!

I've bought a new Toshiba Satellite L500-19E with Windows 7 Home Premium (64 bit). So far, everything's working brilliant.
I've already created the recovery dvds.
Therefore, could I now delete the partition with the recovery programm? I want to use the full space of my hdd and create partitions as I want.
But I don't know how I should do this?
Could you please help me?

greez

Answer:Satellite L500-19E - Deleting recovery partition and create new

If you are 100% sure the created recovery DVDs are ok you can remove all saved data on second partition.
Open Windows Explorer and on the left side where is second partition listed click with right mouse button on it and choose option FORMAT.
Choose Quick format option and click on START.

After minute or two all data will be gone.

Please note: in the future when you want to use recovery DVD for Win7 installation the whole HDD will be deleted and you will lose all your data.
Using recovery DVD you cannot format partition C only.

8 more replies
Relevance 87.74%

Hello

I have a Satellite L500-12Q laptop. I used the Recovery Disc Creator to make the recovery discs. It needs 4 discs. The 1st was writtenk ok, but on the second, near the end of the progress, it stopped advancing. It is almost an hour, and it is still not finished. I am on the second try. The disc is spinning and the drive makes noise as if it were writing, but it doesn't advance at all.

Please, could you help me?

Thanks
Claudiu

Answer:Satellite L500-12Q Recovery Disc Creator Error

Hey Claudiu,

What kind of DVD you are using to create the Toshiba recovery disks? I did also had some problems to create a recovery disk but I changed the media from DVD+R to DVD-R and all was ok!!! I used Verbatim disks for creating because I have really good experience with this kind of disks. Furthermore it seems that TDK disks also work pretty well. Check this!!!

If it doesn?t work check the Toshiba page for a firmware update of your ODD!

1 more replies
Relevance 87.74%

I have a new Toshiba Satellite L500-1XD. I have tried to create the recovery media twice now and both times it failes on the first of two disks with the following error;

Failed to open the following file.
E:\boot\bcd
(Error Code:02013-F1-00000000)

I am using the Toshiba Recovery Media Creator. The operating system is Windows 7 Home Premium 64bit. I am using standard 4.7GB DVD+R disks.

Any help would be useful.

Thank you.

Answer:Re: Failure to create recovery media Satellite L500-1XD

> I am using standard 4.7GB DVD+R disks.

I recommend you to use high quality media like verbatim or Tdk. You see, it can cause problem with ,,low brand,, disks.

2 more replies
Relevance 86.51%

LS.
Just the other night, my laptop was still working fine. The only systemchange I made was installing a program to read .djvu files.
Now my computer won't start anymore. it just says:

------------------------------------
windows fail to start. A recent hardware or software change might be the cause. to fix the problem:
1. Insert your windows installation disc and restart your computer.
2. choose your language setings, and then click "next"
3. click "repair your computer"

if you do not have this disc, contact your system administrator or computer manufacturer for assistance.

file: \Boot\BCD
Status: 0xc000000f
info: an error occured while attempting to read the boot configuration data.
------------------------------------

I do not have the windows installation disc, as it was not supplied when I bought the laptop.
however, I have recently made a recovery dvd. The problem is, only by pressing f12 during start up and then selecting the dvd to boot from, will the recovery start. TOSHIBA HDD Recovery Utility screen does not appear automatically during startup of the computer. however, via the f12-boot way, no options are presented. I cannot select any option to recover just the c partition (no menu appears like I have seen in many tutorials with the 3 options: http://aps2.toshiba-tro.de/kb0/HTD7C02140000R01.htm ) . It will erase my entire HDD.
Help please. I do not want to lose all the data on my other partitions. I'm scared :(
many th... Read more

Answer:Satellite L500 serie. No recovery menu. no option to restore just C.

> I do not have the windows installation disc, as it was not supplied when I bought the laptop.
The disk was not supplied because it was possible to create an recover disk using Toshiba recovery disk creator software which was available on the HDD!

The Toshiba recovery disk is NOT the same like common Windows installation disk!
The recovery disk contains an image and you can just run the recovery disk in order to set the notebook back to the same state like at the first day of purchase. This means, you HDD will be formatted!!!

If you don?t want to lose the file on the HDD, I would recommend booting from a Linux live CD or from WinPE disk.
WinPE can be downloaded and you could create a bootable CD.
Then you could get access to the HDD and could backup the data on external HDD or USB stick.

Google for WinPE or linux live CD to get more details

3 more replies
Relevance 86.51%

HI,

I have been arsing around with my l500-1dt. I used the shop supplied 32 bit toshiba win 7 recovery disk, but I want to recover back upto 64 bit (originally installed on the latop).

I created the 2 dvds with the toshiba recovery media creator but as my current win 7 32 bit version isn't actually broke, it doesn't seem to want to start up any recovery process when I put the disks in and restart.

I've tried holding 0 to start the HDD recovery too and seem to have the same problem.

Is there anyway to force recovery start up and install 64 bit windows 7?

Thanks

Answer:Satellite L500-1DT: Force Recovery back to 64bit Win 7 from 32bit

Hi

I assume the Win 7 was already preinstalled on your notebook.
So the HDD recovery option should be still available on the HDD? Is it right?
I assume you didn?t change anything on the HDD and in such case you could try recover the notebook using HDD recovery option.

In such case you have to press F8 then you should get advanced boot menu.
Here you have to choose Repair my Computer.
New window will appear and here you need to choose HDD recovery!!!

4 more replies
Relevance 86.51%

I have a Satellite L500-19Z laptop which was running a 64bit version of Windows.
Because of a problem I had to re-install Windows. The disc that came with the laptop was Product Recovery Windows 7 Home Premium 32bit. Not realising the implications of re-installing using this

I've now ended up with a 32bit operating system meaning that I can only use 3gb of my 4gb RAM. Can I obtain a Recovery disc for the 64bit version of Windows? I created, when I first got the laptop, a Repair Disc for my 64bit system but, of course, if I try to use this it tells me, rightly, that I don't have a compatible operating system version.

Answer:Can I order Win7 64bit recovery disc for Satellite L500-19Z?

I think you can order it.

Please visit - https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 86.51%

When starting 64-bit version of win 7 cmd.exe script faile due to following error
ERROR could not move v:\_IMG\10185xsP*.swm to v:\HDDRecovery\SWImg

Duplicate file of file already exists.

Has anyone had similar error?
This happens when installing Win 7 as a first time startup

Answer:Satellite L500-1DT - HDD recovery Windows 7 64bit installation fails

Which notebook model do you have?
Please send full model name and model number.

You can find it on Toshiba sticker at the bottom.

5 more replies
Relevance 86.51%

Hi. New user to the forum and new owner of a Toshiba.

I am trying to create the 4 recovery discs for my Toshiba satellite L500-12E. Discs 1, 2 & 4 created successfully, but disc 3 failed two times. The message I received onscreen was: Failed to read the following file: F:backslash ZZImg backslash 09753xsp6.swm Error Code: 020150-20-00000000
( I cannot get the computer to type a backslash on this window)

Anyone know of a similar problem or a solution?

Dwight

Answer:Satellite L500-12E - Error during creating Toshiba recovery disk

Hi Dwight,

Which disks you are using for creating Toshiba recovery disk?

I have good experience with Verbatim DVD-R. Have you tested these disks?

2 more replies
Relevance 86.51%

This is a detailed bug report so please bear with me.
If you can help, or can confirm you've had the same happen to you, I'll be grateful.

I've owned several Toshiba laptops before and I even used to work for Toshiba so rest assured I like the machine. But I've got a problem with its recovery software. I just bought a laptop, Satellite L500-1DT with Windows 7 64 bit, on behalf of a non-techie who lives elsewhere. Since I know from experience that I will occasionally have to field panic calls along the lines of "it's become too slow", "how do I get rid of the accumulated junk", "maybe it's got a virus" and so on, the first thing I checked was the automatic recovery, i.e. how to bring the HD back to "as new" state.

So I booted into the machine, answered the questions until I got into the OS proper, and then ran the "make a recovery DVD" program. Double layer DVD verified ok. With the freshly made DVD, I swapped the supplied HD for a spare I had (much smaller: only 40 GB instead of 320) and booted the rescue DVD hoping that it would remake me a clean system on the blank drive.

It did repartition the drive according to its scheme, with more or less half the space for Windows and the other half for Data including the recovery files. It did install the system in the Windows partition. It then rebooted into the installed Windows 7 to finalize the installation. There, trouble began: an endless loop of reboots for hours un... Read more

Answer:Satellite L500-1DT: HDD Recovery of Win 7 is stuck in endless reboot loop

Hi

First of all I have to say that I was able to recover my unit trouble free.
The Win 7 installation went smoothly and everything was installed properly.

Back to you issue:
For me it sounds like something wrong with the installation? maybe some partitions of the HDD were muddled up? maybe the HDD should formatted again and then you should run the recover procedure.
You have to test it?

Regarding the DVD player:
As far as I know there is no DVD player for Win 7 64bit. There is only a update available for Win 64bit. So you will have to install the DVD player for Win 7 32bit version and then to update it using the patch released for Win7 64bit.

4 more replies
Relevance 86.1%

My two-year old Satellite C75-A-14X suffered a major hard drive crash a few weeks ago. My data has been backed up, but I've been unable to repair my PC, and as I hadn't created any recovery media, I bought a system recovery USB stick from Toshiba. I received the USB stick today and attempted to restore my laptop to its factory default settings. I left my laptop to perform the recovery for about an hour or so. When I returned, the screen said that there was an error (I didn't make a note of the error code) and the recovery had failed. Now, when I restart my laptop I get a blue screen with the following text:

"Recovery

Your PC needs to be repaired

A required device isn't connected or can't be accessed.

Error code: 0xc000000f

You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.

Press Enter to try again
Press F8 for Startup Settings
Press Esc for UEFI Firmware Settings"

When I press Enter or F8, my laptop remains on the blue screen with the above text. Pressing Esc is the only option at this screen that works. How can I re-attempt restoring factory settings from the recovery USB stick?

More replies
Relevance 85.69%

Hi all, just tried to launch recovery media creator on the Toshiba board and the following ERROR CODE: 0d00f6-49-00000015 appears.
This goes after a few clicks on the mouse and the program starts.

Any ideas how to mend this?
Operating system is Windows 7 64bit my new shinny laptop.

any help would be great.

Answer:Re: Satellite L500 - Error appears if I start recovery disk creator

Hi

You used not compatible disk!
You have to test different DVD from different manufacturers.
Not all DVD from different manufacturers are compatible. There are big differences between the brands? So check and try other DVD

4 more replies
Relevance 85.69%

Dear All,
I need help I have Satellite L500-1GJ windows 7 home Premium. With recovery CD I installed OS but after complete installation my laptop screen shows with lot of rectangular dots on the screen and freezes , I tried many times and it comes to the same problem. Find attached screen shot.

Thanking you.
Best Regards

More replies
Relevance 85.69%

I bought a Toshiba Satellite L500-1XD laptop from an Argos store in August. Soon after I got it it occasionally restarted itself and displayed the blue recovery screen saying the laptop has recovered from a hardware failure. This has become more frequent recently and it often shuts down, displays blue screen, restarts and does this over and over again.

I have not installed many new programmes on the laptop and have installed all updates. I have removed any programmes I did install with the exception of Microsoft Office.

Another thing that might be related if that when the laptop starts up it says the Toshiba Service Station has stopped working and tries to check for a solution to the problem.

I would any appreciate any advice on how I could perhaps remedy this

Thanks in anticipation

Answer:Satellite L500-1XD constantly restarting & displaying blue recovery screen

Hi katrina_1,

That means the preinstalled Windows version is still installed, right?!

Well, I think it?s hard to say why it happens? It could be a software or hardware malfunction. Both could be possible.
The most reasons for blue screens are drivers or hardware itself? Are all devices installed properly in device manager or do you see yellow exclamation marks?

In your case I would try to reinstall Windows. Maybe it?s only a software or driver issue?
Furthermore if you have installed two RAM modules, test it with one module only. You can also use ?Memtest86? or another RAM diagnostic tool to test the RAM modules for failures.

1 more replies
Relevance 85.28%

I have damaged my recovery disk 2 on my A30. Where can i get replacement?

Answer:Satellite A30: How to get the Recovery disks?

You will have to contact the ASP in your country for the CD order!
Such CD?s are not very expensive an I?m sure you can purchase the recovery CD from the Toshiba service point!

Please check this page to find the nearest ASP in your country!
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

2 more replies
Relevance 85.28%

Hi,
I bought a refurbished Satellite M70-364 off of the internet but it has no recovery disks and I was wondering if any one would be willing to make me a copy of the Satellite M70 recovery disk or loan me the disks.
Would be very gratefull and will pay for the use of the disks please reply by e-mail [email protected]

cheers craig

Answer:Satellite M70-364 recovery disks

Hi,

you can try it here: http://backupmedia.toshiba.eu/landing.aspx

It?s a newly created site for people which need recovery media for their machine..

GReets

2 more replies
Relevance 85.28%

can anybody help me. i am trying to use my recovery disks on my p10 but it will format so far and then just shut down. it gets to differant stages each time but been as how it started to format i now have no pc so if anybody can help i will love ya forever

Answer:Recovery disks for my Satellite P10

Hello,

did you checked your Recovery CD/DVD for scratches? Also it can be that your HDD has some faulty sectors which can be checked with Scandisk!
Scandsk is a DOS based tool which is on every MS bootdisk. You will find different bootdisks at www.bootdisk.info
When you will connect a FDD USB drive and start the notebok, you have to press F12 for boot menu! Choose FDD USB and the bootdisk will start. Then you can use scandisk.
After that you can use a tool called format.com
This will format your HDD.
When you finished and cleaned your recovery CD you should try the recovery again!

Theo

1 more replies
Relevance 84.46%

Does anyone know where I can download or order the recovery disks for my M70, the place i took it to get it fixed said it cant be fixed without them.

Answer:Satellite M70: Where to order the Recovery Disks?

Hello Luke

Is your M70 not delivered with recovery DVD? As far as I know it is definitely delivered with recovery DVD and please asks your local dealer about that.

The recovery image can not be downloaded just ordered by Authorized Toshiba service partner in your country.

2 more replies
Relevance 84.46%

Ok my first problem with my laptop was that I had about 5 Trojan viruses which passed through my antivirus some how =/

But now cause I rang up Toshiba line they said use recovery disks. I did not do the recovery disks because the disks would not go had to update firmware -.- did nott do that but he said ok press F8 on start up.

I did that HDD Recovery but it got stuck at 31 % and restarts. I load it up and it says BOOTMGR is missing press cntrl + alt + del to restart. I do that comes straight back to the same screen. I do it like 50 times nothing I can do.

I have searched the internet for the recovery disks download no help. I rang them up they said they cant system recover it -.- no idea what to do Any ideas?

Answer:Satellite L300D-13S - Need recovery disks

Hi!

I agree with the Toshiba hotline, you should use the recovery disk for this problem.

You can not download the recovery disks in the internet but you can buy a new one. Here is the link:
https://backupmedia.toshiba.eu

Bye

2 more replies
Relevance 84.46%

Hi, I seem to be getting mixed messages from Toshiba about the availability of Recovery disks for my laptop. Are there any UK readers of this message board that would either sell me a spare copy they have that they no longer need or, do a copy for me of their recovery CD (and ideally the tools & utility CD) for this laptop? I would pay of course.

Answer:Satellite Pro 4340: Need Recovery Disks

Hi

The fact is that you will get all Toshiba CD from the service partner in your country.
You can order the Recovery CD and all another CDs.
I'm sure it's not very expensive.

Check this link:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
There you will find the ASP in your country.

4 more replies
Relevance 84.46%

Hi

We have a Satellite Pro L10-135: Intel with Windows XP.

The laptop is a few years old and is full of spyware, my partner has also accidently deleted some program files. I have removed all personal files and would like to completely reformat the unit to factory condition.

But she has lost the recovery CDs. I have tried to get them from Toshiba, but when I enter the serial number it says that its too old and the disc is unavailable. I've also tried to find the Toshiba Recovery Disk Creator, but on the start menu, it is nowhere to be found instead it says Start>All Programmes>Toshiba>Networking or Start>All Programmes>Toshiba>Utilities.

I need the process to be idiot-proof as I am not too confident with computers, so I would like to get a genuine Toshiba restoration, rather than attemting to download individual drivers, etc.

Does anyone know where I could buy or download the disc in the UK?

Many thanks.

Answer:Satellite Pro L10-135 no recovery disks, need to restore

It is always problematic with old notebook models but what you can try is to contact nearest authorized Toshiba service provider in your country and ask for help.
Maybe they have somewhere archived old recovery discs and can help you with this.

One more thing: very often I saw that people offer recovery discs on eBay.
Check it out. Maybe you will be lucky and find recovery disc for your notebook model there.

2 more replies
Relevance 84.46%

Hi
I have a Toshiba Satellite A300- 1EG.

I created 2 recovey disks as required in the "Toshiba Recovey Disk Creator". I created the first one (Disk 1) 2 weeks ago and the second one (Disk 2) today because I didn't have 2 DVDs in hand.

My first question is does it matter if I have left a period of time between the two creations will if affect the recovery if I ever need to use them?

My second question is do both recovery disks just recover the operating system eg: Windows Vista or do they recover everything that was saved on Local Disk C at the time they were created?

My final question is if it happens my operating system dies, do I just power on the laptop and put in recovey disk 1 and then 2, (if that is not how I do it can someone please tell me how to?)

Regards

Answer:Satellite A300-1EG - Why do I need 2 recovery disks?

Hello

When you use ?Toshiba Recovery Disc Creator? you can see there option for using different empty medias. On some notebook the image can be burned on one empty DVD and on some models you need two of them. It depends on recovery image.

For my Satellite A300 I used two DVD-R medias. I have created recovery images for several notebooks and it is not known to me you have interrupt recovery creation and continue it later. When the first media is finished you must put second empty media and burning procedure will continue automatically. As far as I know there is NO option for disc 2 creation only. Please be careful about that.

I recommend you to obtain two empty DVD-R medias and create recovery DVDs at once.

When you use recovery DVD the whole HDD will be deleted, not just partition C. that means all data saved on HDD will be deleted. If your notebook has two HDD the recovery procedure will affect HDD1 only. Be careful about that and before you start recovery procedure back up all your important data.

Final answer to final question ;) ? when you want to install OS again using recovery media do follow:
Power your notebook ON and press F12 to enter boot options
Put recovery media 1 into optical disc drive
In boot options choose CD/DVD drive and press ENTER
Follow the menu on the screen

Of course, start with DVD1 and when asked insert second DVD.

4 more replies
Relevance 84.46%

I have lost the recovery disk for my Satellite A210, is it possible to get replacements? Thanks

Answer:Need XP recovery disks for Satellite A210

Hello

Visit Toshiba page under https://backupmedia.toshiba.eu/landing.aspx
There you can order recovery discs. I don't know if you can order recovery for your Satellite A210 but you can check it anyway.

2 more replies
Relevance 84.46%

I have a Toshiba Satellite C50-A-19T laptop with OS windows 8.1

Recently my laptop had booting problems so i contacted toshiba support and they told me to get recovery disk from backupmedia.toshiba.eu and i ordered the disk and it arrived today#

When i enter the recovery disk and boot from the disk drive (ODD) it brings the windows logo then after a minute it goes to a blank screen and i waited and after a while it was still a blank screen
I had already went into the BIOS to change the settings to boot from the CD but even after that the same problem persists

Please help

Answer:Satellite C50-A-19T - recovery disks not working

Hi

Go to BIOS and disable the option called: secure boot
Now you should be able to boot from the ODD.

By the way: please check if the HDD is listed on the first BIOS page (name, size, etc?)
In case the HDD details are not visible, the HDD isn?t recognized by BIOS? this could be related to HDD malfunction.

1 more replies
Relevance 83.64%

Does anyone know where (or if ) i can download the installation / Recovery CD's for the Toshiba Satellite Pro A200.

Cheers,

Answer:Satellite Pro A200 Where to download the Recovery Disks

The recovery CD cannot be downloaded!!!!
You have to order it from the ASP in your country if you have damage or lose it!!!!

But I really don?t understand why you ask this!!! Such questions are answered many times!!!! Check firstly the existing threads before you will ask something!!!


regards

2 more replies
Relevance 83.64%

My Sat Pro A10 operated happily running a dual boot system (XP and Mandriva) before failing to start one day.
I successfully used the Toshiba recovery disks and all was OK for a year or so before the same fault recurred.

Now recovery disk Nr.1does not restores the system and the laptop switches off after appearing to function normally for about 20 seconds.

Restoring the MBR and reformatting using a Win 98 recovery floppy failed to solve the problem.

Does anyone have any ideas please?

Answer:Satellite Pro A10 recovery disks fail to reinstall Win XP

What exactly happens when Disc 1 fails? Read error?

Is the Disc scratched or dirty? You may need to order a replacement disc from Toshiba

3 more replies
Relevance 83.64%

Dear All

I wish to find out how many recovery disks my L300-1AQ (Model No PSLB8E) laptop requires.

I have a disk that I made when I bought the computer but I cannot start using it untill I make sure that only one disk is required (if more than one disk is required and I start the recovery process I believe I will render the computer unusable). I know that recent Toshibas come with multiple DVDs so it's definitely worth my checking before I do anything.

Oh and the recovery partition is gone due to an "aggressive" installation of linux, so that's not an option for us (it's new user is a windows user).

I cannot find this information on the internet or in the manual so I would be grateful if anyone out there has this information.

Best wishes to all

Answer:Satellite L300-1AQ - How many recovery disks required?

Hi DiodePrridge51b,

If Toshiba recovery disk creator required 1 disk only, you need only 1 recovery disk to restore factory settings.

It?s always depending on the notebook model and OS how much disks you need but if only 1 disk was required it?s enough and you start recovery installation. :)

3 more replies
Relevance 83.64%

Have an Satellite Pro A300-28V laptop with Vista 32 Business. After a recovery from HDD Recovery partition I decided to use the function Complete PC system backup to make an image for future recovery with all my present settings. Too annoying to reset to factory default (Thunderbird 3.0 Mail, Open Office, and some other small applications previously running with no problems for years on another desktop computer).

The system needs 5 to 9 DVD's and it writes the first DVD. Takes roughly 30 minutes. Then, during verification of that disc it hangs. Verification bar stops at about 30% complete.
Anyone with that experience? Does not the Business "Complete PC image" work well on a OEM installation of Vista?
Or is it maybe the DVD driver who needs an update? I do not use a 3rd party burning software.

/Sweden

Answer:Satellite Pro A300-28V - Can't create own recovery disks

Hi

Which program you are using to create your own recovery disks? For example I mean Acronis, Norton Ghost, etc.

In your case I would try it with another burning program like CD Burner XP or Nero.
Furthermore you could try to remove the upper and lower filters in Windows registry, maybe it will work.

Last but not least on the Toshiba website you can check if there is a firmware update for your CD/DVD drive.

3 more replies
Relevance 83.64%

I have a Toshiba Satellite L350 which I bought some years ago

Originally it was a vista home premium laptop and I opted for the Toshiba windows 7 upgrade and its been pretty much trouble free .

However recently something went a bit weird and things just were not working well (it would not always log you out and never seemed to shutdown correctly) and various other applications did not run correctly.

After a few uninstalls ,reinstalls, scans and Microsoft patches did nothing I decided to take the plunge and use the recovery disk.

I had bought one from Toshiba when I got the machine originally and had made one myself before the upgrade to windows 7 and one again after.
I still have the windows 7 upgrade dvds so I can apply them after if I had to start back on vista again.

The only other big change has been a RAM upgrade to 4gb - I still have the original RAM if I need it but before all this there were no hardware issues reported and chkdsk was fine also.
So to me it was the o/s that was the problem.

I have now tried all the recovery disks and they all have the same problem reporting that imagex cannot uncompress the second file image as it is corrupt at block 90 ? I don?t have this actual message to hand
but can update later.


I can?t see that I?m doing anything wrong as all i do is put the dvd in the drive and restart the laptop with F12 to boot off the recovery DVD and follow the on screen commands.
Have you any reports of such of this p... Read more

Answer:Recovery disks not working for Satellite L350

Thats very strange that al recovery discs show the same error message. As far as I know when you start recovery image installation the HDD will be formatted, new partitions created, recovery image copied on second HDD partition and as last step is recovery image installation.
>I had bought one from Toshiba when I got the machine originally and had made one myself before the upgrade to windows 7...
Have you tested both of them in the past?

Generally speaking all you do is right. In my opinion the problem can be recovery image itself or maybe HDD has some failure on certain sectors.
If you can obtain second HDD somewhere exchange it, set BIOS to default settings and test recovery installation again.

5 more replies
Relevance 83.64%

I recently bought a new notebook from Toshiba, the Satellite P300. It has Vista installed out of the box but there is no recovery media included with the package. I'm worried that if something might go wrong in the future, I won't be able to repair my operating system.

Two questions:
1) Is it normal that there is no recovery disc included with the Satellite P300? In other words, other customers who have bought the same laptop don't have this either. Or is this an exception and a mistake of my local vendor. In the manual on the 'included in this package' list there is no mention of a recovery disc included with the package.

2) Can I get a recovery disk from Toshiba if something goes wrong?

Answer:No recovery disks included with my Satellite P300

Hi

> Is it normal that there is no recovery disc included with the Satellite P300?
Yes, because the notebook was equipped with the HDD recovery option which allows you to recover the notebook from the HDD.

> Can I get a recovery disk from Toshiba if something goes wrong?
There is preinstalled Toshiba Recovery disk creator software.
This software creates a Toshiba recovery DVD. I think this info was published in the user manual which should be preinstalled on your notebook.

So I would strongly recommend reading the user manual and to create such recovery DVD before you would change anything on the notebook.

Cheers mate

2 more replies
Relevance 83.64%

Hi folks,

Posting this question for my neighbour as he now has no internet access as laptop not working - Satellite C660 running Win7.

When powering up he gets the Toshiba screen then a blank screen with cursor at the top left flashing.

Tried to boot from Win7 DVD (Pressed F12 to get to boot options & changed to DVD), can hear the drive trying to access the dvd but then get the message 'failed'. Win7 DVD works in both my laptop and desktop pc's.

Any ideas.

Thank you

Nigel

Answer:Satellite C660 Won't boot from HDD or recovery disks

> When powering up he gets the Toshiba screen then a blank screen with cursor at the top left flashing.

Possibly the HDD is dead.
You ca try to power up the unit and press F2
Now you should be able to access the BIOS.

If the HDD isn?t listed on the first BIOS page, then this means that HDD isn?t recognized by BIOS and this means that HDD is faulty.

7 more replies
Relevance 83.64%

I'm upgrading the hard drive of my *toshiba a300-1mz*, but I'd be sure that I can use the *recovery disks* maked at the first boots for the s.o. (vista)

I expect your support...
thank you very much...

Answer:Satellite A300-1mz Can I use the recovery disks after a HDD upgrade?

Hi

Yes, you can do this!
If the HDD has been recognized by BIOS then you should boot from Toshiba recovery disk in order to reinstall the OS which was preinstalled by Toshiba.

Greets

5 more replies
Relevance 83.64%

I have a Toshiba Satellite Pro A300 2CW. I bought it with Software Windows XP (included in a CD), which worked perfectly for years. I have reinstalled it several times during this years, but now the CD has deteriorated and it doesn't work anymore.

Originally the machine had WIndows Vista installed with DVD recovery creation option and a HDD recovery option, but I think this is not possible for Windows XP.

Do I have any options?Where could I buy the original Windows XP CD?

Thank you

Answer:Satellite Pro A300-2CW - Need Recovery disks with Windows XP

Hi

You can try to order it on https://backupmedia.toshiba.eu/landing.aspx
Other way you can install own WXP version. All WXP drivers, tools ad utilities can be downloaded from Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp

1 more replies
Relevance 83.64%

Hi together,

I got a big problem. Win 7 Home Premium 64 BIT crashed on my satellite L550D-13V.

I tried to repair but it doesn't work. So I decided to recover via HDD Utility.
Everything seems to be okay but in the end the tool said that errors occured. I tried to recover again but the process aborted with bluescreen "PAGE_FAULT_IN_NONPAGED_AREA" this time.

After reboot system told me that no bootmgr is available. I tried to boot by using recovery disk but it also seems to be faulty because the system cannot not boot from the disks.

And there's my problem. I am unable to boot / recover now. Volume D seems to be okay - the HDD utility files are still available but I cannot create new recovery disks and it is not possible to boot into HDD utility tool.

Do you have any ideas?

Many thanks in advance and regards
Danny

Answer:Satellite L550D-13V - How to recover without recovery disks?

Hi

The story is strange?
I?m wondering why you are not able to boot from the Recovery disk?
Did you use the created recovery disk in the past or did you try this disk for the first time?

However, regarding the error message: PAGE_FAULT_IN_NONPAGED_AREA
I googled for that and it seems that this could be related to memory fault.
Possibly one of the modules malfunctions.

Of course this is just an personal opinion?

If an HDD folder is available on your HDD, then there is a small chance to get the HDD recovery to work. Here a interesting thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=40790

3 more replies
Relevance 83.64%

The computer has a black screen with cursor in the middle not able to move. I have opted to do recovery disk but it is not doing anything still black screen with cursor in the middle of screen. I have backed up computer ages ago not worried about wiping it all off just want to restore to factory settings.
 

Answer:recovery disks for toshiba satellite a500

I have similar problem I got mine to boot from cd by removing hd.
didnt do much good didnt have anywhere to install so I tried repair computer
and put hd back in no good wont recognise hd can use cmg line that way though
hope someone has an answer
 

3 more replies
Relevance 83.64%

Hi

is there a way to make the recovery disks install win7 x32 instead of x64 (Satellite Pro C660-2JR)

Answer:Recovery disks creation for Satellite Pro C660-2JR

If your notebook was delivered with 64bit version you can create recovery disc for this preinstalled version only. With other words, recovery image saved on recovery partition will be saved on empty DVD disc. Nothing more than that.

If you want to use 32bit OS you must check if your notebook model is supported for it and install own version.

2 more replies
Relevance 83.64%

I bought a Ideacentre k430 back in 2013. It's a wonderful computer and I really like it. Unfortunately, the hard drive is failing and corrupt. I can't find my original recovery disks and I can't make an uncorrupted back up now.What I hope to be able to do is purchase a set of recovery disks so I can simply replace the hard drive and restore to factory. But I've had two messages from lenovo telling me I must first bring my warranty to date before they can answer my questions. I don't mind paying to do that IF someone can let me know that will definitely enable me to eventually purchase the recovery software I need.Can someone let me know if I will be allowed to purchase recovery software if I agree to pay for warranty extension for this old but beloved computer?Otherwise its a waste of money as the hard drive is shot.

More replies
Relevance 83.64%

Hello. I have been working on my T30 2366-97U. New heatsink/fan and keyboard. Now need hard drive. I never lost a disk in my life! Now cant find my os disks. How to get new ones? From Lenovo? From Microsoft? It came preinstalled on the t30. Some people seem to be cooking them up and selling them for like US$1.00 each - total 8 disks? Something doesnt sound right... Any info helpful. Thanks!

Answer:How to get new XP Pro (system recovery?) disks?

If the HD that came with it is dead or gone, you will need to call Lenovo and I think OS discs are $50.00    

2 more replies
Relevance 83.64%

My
HP PX624AA XP Pro 2005 Media Centre Photosmart m7061.uk PC which has been a joy to use this last ten years recently started playing up.
Since XP has not been supported I have been trying out different browsers installing and uninstalling which has led to programs not responding so decided to use the system recovery using the two disks that I created when the PC was new and was talked through the process by HP on the telephone with some other queries I had under warranty.
So I started with disk 1 and had two choices and decided to reformat the
Hard Drive for a clean install, some twenty minutes in and 14% showing a error box informed me that it could not find file c:\1386\Drv\APP17311\src\CTShared\ShareDLL\AudPlug\CTNvfFlt.dll and so instead of aborting clicked on ignore to carry on but then this happened about ten times with same file heading but second half of file different name.
Eventually disk 1 stopped and was asked to load disk 2 and I thought after that had finished I would be looking for the missing files but instead when disk 2 finished it asked for disk 3. Disk 3 where the hell does disk 3 come from. The HP advisor definitely told me to get 2 DVDs ready and so did the pc and even online it still states 2 disks are needed. Now the PC is knacked for the use of a better word, all I have is a faulty disk 1 and no disk 3 so it looks like back to factory settings is out of the question for me because all these years I have kept my PC as original as was possible and us... Read more

Answer:HP System Recovery Two Disks or Three

If you only formatted C: partition, you may still have a hidden factory restore partition on your hard drive. Restart your pc and continually tap F11 (about every 1 second) and see if it brings up a menu screen.

10 more replies
Relevance 83.64%

I wanted to perform a system recovery and tried using my recovery disks.  The first disk froze at 36% so I was stuck.  I ordered a new set of recovery disks from hp online and they sent me a USB flash drive.I am following the instructions shown below but I do not have a "USB Storage device option"Do you have any suggestions on how to get this option on my menu. thanks Immediately press the Escape key repeatedly, about once every second, until a Startup or Select Boot Device Menu opens.The selections you need to make vary slightly depending on the type of menu that appears on your screen:If a "Startup Menu" opens, press F9 to open the "Boot Menu" or "Boot Device Options". Use the up or down arrow key to select the name of your USB Storage Device (the volume label of the drive). Then press Enter to continue. 

More replies
Relevance 83.64%

Hi

I have been having virus problems with my computer lately and feel that it would be easier if I just reload my system to the factory default. Unfortunately, the factory restore on my computer via a partitioned drive is not functioning. I do not know if this is virus related. I was wondering if I could use disks generated from another computer. I have an Acer Aspire 5610Z running on Windows Vista and my friends computer is also an Acer Aspire but a different model number. It also runs on Windows Vista. Can I use the recovery disks made from his computer on mine? Any advice would be appreciated. Thanks.

Answer:Using system recovery disks

Did you get a restore disk with your laptop because I got a partition and disk.

1 more replies
Relevance 83.64%

Exactly what is on these 6 cd's? If I need to reinstall my OS can I use these instead of my Windows XP cd? I don't want to wipe out everything on my HP laptop.

Thanks
 

Answer:HP System Recovery Disks???

Running recovery disks will wipe out everything on a computer and restore it to the way it was when you bought it.
 

1 more replies
Relevance 83.64%

A few years ago i created system recovery disks and had to use them to restore my laptop. I didn't know what to do so my friend did it for me, but now he's not around and i need to reformat because i'm giving the laptop to my girlfriend.

I still have the disks but have no idea how to use them. I've gone in the HP recovery manager and clicked yes when it asks if i want to restore to the factory settings. It then restarts and seems to be looking for a windows 7 installation disk which i don't have and as far as i recall never have done.

On boot up i tried pressing f11 and it said it was going to the system recovery, and then it just loaded up windows anyway.

How do i restore my computer?

Answer:How Do I Use My System Recovery Disks?

In order to use your recovery disks, you have to make sure that your computer will boot from the CD/DVD drive as the first boot option and not from the hard drive. According to HP, the factory default boot order for the Pavilion dv3 series is floppy drive, optical drive (CD/DVD), hard drive, USB device. Since you probably don't have a floppy drive connected, the computer should boot from the CD/DVD drive.

Put Recovery Disk # 1 into the CD/DVD tray and close the tray. Now restart the computer. You will probably see a brief prompt on the screen to press any key to boot from the CD/DVD drive. You must press a key (the space bar is a good choice) and the computer should boot from Recovery Disk # 1. If you miss the prompt the computer will then move to the next device and boot from it. (That would be your hard drive.)

But if the default boot order was changed, you'll have to go into the BIOS to make the CD/DVD drive first boot option.

This HP article gives some more info including how to access the hidden recovery partition and how to use the Function keys to access the BIOS.

Configuring the Boot Order in the System BIOS HP Pavilion dv3 Series Notebook PC | HP Support

5 more replies
Relevance 83.64%

Hi all

I went to go online with my wife's HP desktop this morning and heard a noticeable ticking noise. I shook the mouse to open the display monitor and it said "disk drive failure". It was working the night before without any error messages or anything that would let me know the HD was going south. Unfortunately I don't have hardly any info on it except as follows:

HP Pavilion p7-1287c PC
Model # p-7 1287c
I have the product number and Serial number but probably not appropriate to give here.
5 and 1/2 years old
Came with Windows 7
It was an Intel I-5 processor
I believe it had 10 gigs of ram.

I have a couple of HP desktop computers that are dead for one reason or another and so I'm going to take a hard drive from one of them and see if they will work, if not I will buy a new hard drive for it.
I do have the HP restore disc set that I ordered from HP shortly after I bought the machine.

Does anyone know if these HP System Restore disks have a routine to format the newly installed Hard Drive and then restore the original OS? Or, will I need to reformat the hard drive myself and then install from the System Restore disks? Been years since I reformatted a hard drive. What is the sysntax to partition and reformat it?
Then, once it is formatted I will need to go into the BIOS Setup Utility won't I and change from the C: the disk to the CDROM drive so I can put in the System Restore Disk set, right?

I have a new PC for my wife already so no hurry... Read more

Answer:HP system recovery disks...

Everything is done automatically when restoring your computer. You will be needing your Restore disk and not too sure about your computer drivers too, but I think you will also need them if not yet included in your restore disks.
 

1 more replies
Relevance 82.82%

I'm working on a Satellite A200, which doesn't have any recovery disks, and now seems to have a messed up Vista installation.
Before I started working on it, I created backup images of the Hard drives 3 partitions (C:\, TOSHIBA SYSTEM VOLUME & HDDRECOVERY) which I have saved on another computer.
My question is, can I create recovery disks from these images? The machine they are saved on triple boots XP, Vista & W7, they were created using ShadowProtect Desktop.
I can mount the images into either OS...

Answer:Satellite A200 - Burn recovery disks from HD image?

As far as I know it can be problematic now. Recovery media can be created when notebook has ?factory settings?. That means available "Toshiba Recovery Disc Creator" tool and recovery image placed on second partition.

When you move this recovery image somewhere else and put it back later it can happen that "Toshiba Recovery Disc Creator" cannot find the files anymore.

4 more replies
Relevance 82.82%

I was just wondering about this.
Could i make ISO images of my recovery disks, i know i could just make some more copies, but i am learning how to create ISO images.
But i was a bit worried what would happen when i put a disk in the drive.....

Answer:Re: Satellite L300-1BV - creating ISO images of your recovery disks

This with recovery image is a little bit complicated and something like this is not possible.
All you can do is to create recovery DVD using Toshiba recovery disc creator or start recovery from HDD directly using Toshiba recovery option (F8).

You can do with this what you want but how you want to start installation later?
Sorry but I think it will not work.

5 more replies
Relevance 82.82%

Hi,
I bought Satellite A500 yesterday and now I am trying to create the recovery disks before anything else.
However, towards the end of the 1st DVD, I get an error message saying "Faile dto open the following file. e:\boot\bcd (Error code 0201123-F1-00000000)" and then when I click 'OK', the DVD is ejected giving a message 'failed to create recovery media 1'. Upon physical examining I have noted the DVD is written to almost full.

Any advise on this? Also, in the interface, it does show a USB option and says to insert a USB media with more than 7GB free. Can I use this to create the recovery disk? If so, when I reinstall windows 7, can this be used as a bootable disk?

Would greately appreciate any help on this issue. If it is malfunctioning, I want to return it ASAP.

Thanks,
Thilan.

Answer:Satellite A500 - problems with creating the recovery disks

As far as I know you cannot use external device for recovering so it is very important to create recovery DVDs.

Try to create recovery disc using DVD-R media only. Use high quality medias like TDK or Verbatim.
Last month I created recovery discs on Satellite A500-157 and everything went well.

2 more replies
Relevance 82.82%

Hi,

Is it possible to extract the OS from the recovery cd's that you make?

Answer:Re: Satellite A660 - Extract Windows 7 from recovery disks

Yes, it's possible but you won't get Windows 7 installation files but the image of the system just before the very first factory run. Anyway it could be useful on another Toshiba notebook replacing Vista.

2 more replies
Relevance 82.82%

Hi

I bought in June 08 a Toshiba Satellite P205D-S8804 on Ebay Australia and I now need to format system but cannot find my recovery disks that were provided with system.

Where can I order the necessary recovery disks from in Australia? Is there a number i can ring for products no longer under warranty?

Answer:Satellite P205D-S8804 - Need replacement recovery disks

Hi Eagle,

I don?t life in Australia so I don?t know how it works exactly but I would recommend contacting an authorized service provider in your country. The guys can order a new disk I think.

Furthermore if you have a Microsoft Windows disk you can reinstall Windows with this disk. You can download all drivers and tools on the Toshiba website.

4 more replies
Relevance 82.82%

Hi all,

I have a brand new Satellite M300-18P, pre installed with Vista 32bit. I would like to make rescue disks using the pre-installed Toshiba utility. Every time I try to burn a disk, the process stops halfway saying (and I have to translate this bit): "a problem has occurred in the power calibration area". code OEO1B5-26-00037304.

The program suggests the DVD-disk might be faulty, and urges to try another disk. After 3 disks, I do not believe this is the cause. I used DVD+r, normally compatible with the driver.
I want the recue disks since I want to format the hard disks and make a clean UBUNTU install. Might I decide not to use Ubuntu any longer, then I would like to install the original software back on the M300.

Can anybody help? Thank you. Kurt

Answer:Impossible to make recovery disks with my Satellite M300

Hello Kurt

I recommend you to use DVD-R media and just high quality product. Friends U400 is a little bit ?sensitive? with medias but I have used TDK DVD-R and it worked perfectly.

3 more replies
Relevance 82.82%

I just restored my Windows Vista Home Premium 32 bit Operating System on my Toshiba Satellite L350-170 using the recovery discs I created 4 years ago when I first bought my laptop.

Having restored the OS, it has taken the best part of a day to install all the Microsoft updates, including Vista Service Pack 2, and other programmes I use (e.g. MS Office, Real player, AVG etc.).

Now everything is up to date, I have created a new system restore point on the hard drive and run the Toshiba Recovery Media Creator again. Just out of interest, will the recovery discs be created up to the last restore point, or will it just reproduce the discs I already have, which restore it to the factory settings?

If this only restores it to the factory settings, is there a way of creating a system disk to get it back to the point it's at now?

Answer:Do new recovery disks for Satellite L350-170 save updates?

Hi, no it doesn't work that way. Running Recovery will restore the HDD back to how you got it from the factory.

Message was edited by: RandyRoberts

2 more replies
Relevance 82.82%

I recently purchased a Satellite Pro A300-13X notebook with Vista Business installed.
It came with two product recovery discs to install XP professional.

Since I decided just to use XP, I followed the procedure for product recovery and I am now running XP from the first disc. It seems to run properly.

I'm unable to install the second disc and wonder where it is for. It contains 7 application files 001-002-003-004 crc and tpa.

Does anyone know what to do with this disk?

Answer:Satellite Pro A300-13X: Question regarding the Product Recovery disks

Don't know what this disc contains or how to install it, but check if everything works and if all utilities and programs are installed, which you had under Windows Vista.

1 more replies
Relevance 82.82%

I have a Satellite L300 and have made a few sets of recovery disks as from what I read some makes work and some dont and so far none have.

Insert disk 1, press power on button and hold F12 down until the option for boot comes up.
Select CD/DVD then dos type box appears with X:\windows\system32\cmd.exe - startnet.cmd
and in the box Waiting for ODD to become available...

You can add as many dots after that as nothing proceeds further - hence three sets of recovery disks on three different brands of DVD any advice would be pleaseing!

brian

Answer:Re: Satellite L300 - Recovery disks made but wont run

Hi

According to your description, the system recovery procedure does not start up and the ODD cannot read the disk.

In your case I would recommend recover the notebook using the Toshiba HDD recovery.
You can start the procedure from HDD; press F8, choose repair my computer, Toshiba HDD recovery.
Now the system restore should proceeds?

After the notebook has been set to the factory settings, check if there is a firmware update for this ODD (CD/DVD drive). If yes -> update the firmware.
I know you have tried three different DVD brands but you should still try to create a recovery disk using another DVD disk? I?m using TDK DVD ?R and had good experience using it. A friend of mine uses Verbatim DVD?R and never had any problems?

5 more replies
Relevance 82.82%

My L350 has suffered a disk problem and would not boot. It attempted an automatic recovery but failed. I have rebooted from the system recovery cd's I created when the laptop was first purchased but the recovery fails at image 5.

Does anyone have any advice?

Answer:Satellite L350 will not boot or recover using the recovery disks

Have you used these recovery discs in the past?
If the discs are OK I can imagine there is some problem with HDD but I?m not 100% sure about that.

2 more replies
Relevance 82.82%

*Request for help*.

Following system crash 16 January have reinstalled Windows - as per my TOSHIBA Manual,
from the 2 supplied Recovery CDs - onto my Satellite 2450.

After watching the TOSHIBA & SYMANTEC 1.0.1.0 Recovery Utility screen show progress
over the course of 21 hours - inserting Disk 2 as per screen instruction along the way -
at the end I was left with blank screen apart from a C Drive Prompt.

I am uncertain as to the proper required action to continue the recovery.

REQUEST ADVICE correct procedure to complete the recovery.

Regards.




Using 1.4 Mb floppy StartUp disk can see that C: has what appears to be the XP folders.

- plus a folder, SYSPREP, which with another machine I see has contents shown below.

Volume in drive G has no label.
Volume Serial Number is 1724-0EEE

Directory of G:\SYSPREP

01/17/2003 07:40 AM <DIR> .
01/17/2003 07:40 AM <DIR> ..
08/29/2002 01:00 PM 16,384 SYS.EXE
08/29/2002 01:00 PM 27,357 CVTAREA.EXE
08/29/2002 01:00 PM 32,768 POWERCFG.EXE
09/20/2001 01:40 PM 588 WINBOM.000
02/25/2002 09:52 AM 153 SYSPREP.INF
08/29/2002 01:00 PM 112,640 SYSPREP.EXE
08/29/2002 01:00 PM 24,576 SETUPCL.EXE
08/29/2002 01:00 PM 50,055 OFORMAT (a COM file)
08/29/2002 01:00 PM 15,360 NETCFG.EXE
08/29/2002 01:00 PM 46,592 MSDINST.EXE
08/29/2002 01:00... Read more

Answer:Satellite 2450 Recovery Disks completed - Is there life after their use?

Just info. Finally cracked it and re-installed. Not clear why. Kept returning *Extraction Failed*. I kept running the recovery disks again, and again. The rate of progress seemed to increase on each attempt. Got to the *insert second disk and press Enter* bit. Did so, and on this occasion got message that the extraction failed due operator abort. Don't I just love this kit! Regardless ran again from scratch. When second disk requested I inserted it and confirmed done by pressing the letter *O* (For OK) rather than Enter. That ran through to 100% whereupon got a dialogue asking to remove the second disk and boot using Ctrl Alt Del.

It booted and brought up the Welcome screens. Could be in with half a chance. Thanks for input. zeds are calling.

2 more replies
Relevance 82.82%

i want to reformat my laptop, its a Satellite P300.... many things do not work anymore ie: system restore and corrupted c drive

1) would reformatting my laptop fix these problems?

2) 2 disks "product recovery media TOSHIBA satellite p300 etc and says windows vista ulimate 64 bit

Does that mean they contain vista? (vista came pre installed

3) should i make a copy of the vista serial PRODUCT ID that is on my system menu screen

4) how would i run these disks.....

I appreciate if you could help, its an awesome computer

Will reserach on how to run the disks, just wanting to make sure they contain vista

Answer:Satellite P300 - Does the product recovery disks contain Vista?

> 1) would reformatting my laptop fix these problems?
Probably yes

> 2) 2 disks "product recovery media TOSHIBA satellite p300 etc and says windows vista ultimate 64 bit
As far as I know P300 has been equipped with HDD recovery and the Vista 32bit was preinstalled. There should be an option which would helps to recover the notebook using the HDD recovery option. Press F8 while notebook booting up. Then choose Repair my Computer and start the HDD recovery.
This should set the machine to factory settings. Finally you could create a recovery disk using the preinstalled software called Toshiba recovery disk creator.

> 3) should i make a copy of the vista serial PRODUCT ID that is on my system menu screen
You could do this but as far as I know the Vista on the Toshiba Recovery disk is already activated and you don?t need any serial keys.

> 4) how would i run these disks.....
Usually you have to boot from such disk

PS; to get more details you should read the user manual and should read the threads in this forum!

2 more replies
Relevance 82.82%

I have 3 recovery disks which were provided with my Toshiba (which was originally bought in the US for me by my brother although I am UK based). The laptop was originally running Windows XP Home Edition and Microsoft Works and is covered in Toshiba labels to that effect. When I try to restore the system using the recovery disks, the screen says it is installing Windows 95 ! Also, although It appears to be reformatting the hard drive, it only gets as far as 86% then stops ! (even if left overnight)

So I have two questions:

1) Can I get correct replacement start-up disks for XP?
2) Is there a likely reason for the 'lock-up' at 86%?

Answer:Satellite 2415 S205 Recovery disks do not work

Hey there

About getting correct discs, I think you can try here:

https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 82.82%

A short question;
how to dual boot with the two recovery disks tath ive got with my laptop (Satellite Pro L40)

disks 1&2 are windows vista buisness
disks 3&4 are windows xp profesional
disk 5 is bios update

The guy where i bougt the computer (an ordinairy electroinic store named expert) said it was posible with tose disks.
I
I've already made a partition but when i boot the disks it doesnt has the option to select a partition

thanx already

Answer:Satellite Pro L40 - How to make a dual boot with two Recovery disks

>Satellite Pro L40 - How to make a dual boot with two Recovery disks?
Short answer: you cannot do this. Maybe if you have two HDDs (I didn?t tried this) but as far as I know your SP L40 has only one.
Ask this smart guy how to do this. Maybe he has some useful tip.

2 more replies
Relevance 82.82%

Hi,

I have a satellite 1800-400. The cd shows in device manager but it doesn't recognise the cd is in the drive. I need to use the recovery cdsas the system has been damaged virus etc. Is there a way i can get around the cd drive problem.

Thanks,

Hugh.

Answer:Satellite 1800-400: CD Rom wont work/ Cant use Recovery Disks

Hi,

you have to boot from recovery disk by pressing C or F12 at startup.

6 more replies
Relevance 82.41%

Hi, I have a just purchased the ThinkPad E550. I want to create recovery disks for the system. I have already upgraded the laptop to Windows 10 (system came with Windows 7). There is no OneKey Recovery icon that I can find, and I understand that this may not be available for anythign above Windows 7. How do I create the recovery disks? Thanks

Answer:How to create recovery disks for ThinkPad E550 with Windows 10 and no OneKey Recovery option

Hi srm17,
Welcome to Lenovo Community.
Does this help?  http://www.techradar.com/us/how-to/software/operating-systems/how-to-create-a-windows-10-recovery-di...

3 more replies