Computer Support Forum

Re: Satellite A300-21I - Recovery hangs at 52%

Question: Re: Satellite A300-21I - Recovery hangs at 52%

Hi

I have an A300-21i and it wont boot. It wont recover using the image as the image seems to be corrupt and it wont re-install with the recovery disks it always hangs at around 52% whilst unpacking the OS from image X.

I have however proved that it is not the machine as I have managed to install Win XP Pro on it and everything is fine. BUT I would like to return it to factory condition as I would like to sell it.
I would appreciate any thoughts on this

Many thanks

Relevance 100%
Preferred Solution: Re: Satellite A300-21I - Recovery hangs at 52%

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Re: Satellite A300-21I - Recovery hangs at 52%

Hi!

I have never noticed a problem with my Toshiba recovery disks but have you tried to format the HDD before you use the recovery disk? Therefore you can use a Microsoft XP disk to format the whole HDD.
After this boot from Toshiba recovery disk again and follow the screen instructions.
Does it work?

Furthermore it would be interesting to know if it?s possible to install Windows with a Microsoft disk. Can you please check this?
Maybe the Toshiba recovery disk is scratchy or it?s a HDD malfunction and so it always hangs during the installation.

Bye

6 more replies
Relevance 72.57%

I'm moving from a desktop environment to my new Satellite A300.

The only problem I've encountered is with Corel Graphic Suite X3. This works fine on the desktop under XP and also on my wife's non-Toshiba laptop under Vista Home Premium. On the A300 it hangs unpredictably. Sometimes it won't load, other times it loads and gets a Vista error immediately.

The error message is non-specific and the program closes. I've got Vista and X3 fully updated to the latest service releases. So I figure the problem is likely to be the Vista setup on the A300.

Can anyone suggest where to look to fix this?

Answer:Coreldraw X3 hangs on Satellite A300-1BZ

Hello Peter

In my opinion you should check FAQ section of software manufacturer. Maybe you will find some useful info about configuration under Vista.
Have you tried to remove it and make new installation?
Check which applications are enabled in auto start? Try to disable all you don't need.

It is not easy to say what is wrong there. Every of us have own OS configuration with different applications running at the background.
In my opinion offering answer to this is nothing but ?mission impossible?. ;)

1 more replies
Relevance 72.57%

My laptop constantly hangs. Works for 5 minutes and again hangs. At once does not join.

What to do!?

Answer:Satellite A300 constantly hangs

Did you install new RAM recently? You should check the RAM using Memtest, which is a bootable CD or Floppy Disk from www.memtest.org

Do a BIOS update and update drivers that are newer than you currently have installed. You can download them from the Toshiba website.

You may also try backing up your data and running Recovery to restore the system back to its factory state. If it still hangs after reinstalling Windows, then the hardware may be faulty. An ASP can repair the faulty hardware for you - free if its under warranty.

2 more replies
Relevance 72.57%

Hello!

Month ago I bought a laptop Toshiba Satallite A300-1OC.
But there is a problem, the system does not consistently work as long as one does not hang.
Then the work is stable and reliable.

I'm using Windows Vista.
Loading the latest updates to the operating system, nothing helps.

It relied on your help.

Thanks in advance.

Answer:Satellite A300-1OC: Vista hangs sometimes

Hi

As I understand your issue; the Vista hangs sometimes but not always.
I mean it?s hard to replicate this issue and the reason. Is it right?

Hmm? did you try to recover the system and to check if this would happen again?
Did you notice an higher temperature while this issue appears?

How about the BIOS update? Do you use the latest BIOS on your notebook?

I think you should check everything what I have mentioned ?

3 more replies
Relevance 71.75%

Hi;

I am experiencing problem on my laptop built in camera. After opening it, using whether in Yahoo messenger (webcam) or by Camera Assistant software camera, in a few seconds it will hang.
I tried to check if the driver for this camera is working, it says it has the latest update. I also try to uninstall and re-install,same problem
Whats wrong with this camera? I just bought this laptop last month and giving me a problem. Can anyone help me here?

Model : Satellite A300
Part #: PSAG8E-05J00TEN
Serial#: 29452151Q

Thanks!

Answer:Satellite A300 - built in camera hangs

What hangs?

Does the whole system hang? Or just the webcam application?

Have you installed drivers for another USB device recently?

Try updating the BIOS, which can be found on the Toshiba website.

2 more replies
Relevance 70.93%

I have Satellite A300-U01... there is one problem sometimes when I ENABLE or DISABLE Bluetooth device in my laptop, the laptop hangs for 3 or 5 seconds and if some song is playing it hangs and make strange noise for 3 or 5 seconds then become normal...

Answer:When the BT is enabled/disabled Satellite A300-U01 hangs few seconds

Has your notebook ?factory settings? or you have installed own OS?

4 more replies
Relevance 70.11%

I have a computer that is a Statelite A300.
I have recently formated my computer because it kept frezzing.

I reinstalled using the toshiba recovery patition.
Once i start the computer i login and then it screen comes up saying.
+Preparing your system. This might take a few minutes. The system may restart automaticaly... Please wait.+

So i wait and wait and wait. nothing happenes just more and more restarts.
Also i am about to format using recovery dics's i created in safe mode a while ago.

Anyone got any tips. please do hesitake to asked questions.

Answer:Satellite A300 hangs on login screen - "Preparing your system"

On the "Please Wait" screen, can you press ESC or ALT-TAB to see whats happening in the background?

Also, have you tried resetting the BIOS to its default settings?

3 more replies
Relevance 67.65%

Hi

my A300 has become a bit slow loading up and such. So i want to format the hard drive.
I have made 2 DVD's using Toshiba recovery disc creator. Now what.
Do i do use the two disks that i have just made or do i use the product recovery media disks that came with the system.
Also what about all the drivers and such will they be on the disks i created or do i need to search for them and other programs such as my virus programs and such.

Cheers for any help

Answer:Re: Satellite A300 - How to run recovery

I assume you didn?t read any topics here in the forum regarding the recovery procedure?
Right?
So I recommend doing this because this theme is one of the most asked themes here in the forum!

PS: You need to boot from recovery disk and have to follow the instruction on the screen.
Recover disk will format whole HDD and will set the notebook to the same state like at the first day of purchase.

2 more replies
Relevance 67.65%

Hello,

I can see that WXP drivers are available for my Satellite A300 but can I have a recovery DVD for my Satellite A300-19R? Should I call Toshiba?

The installation is simple and without error messages. I'm not experienced with WXP installation and must not install ALL the drivers step by step.

Thanks for your answer.

Answer:Can I get WXP recovery for Satellite A300-19R?

You can order one online at:
https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 67.24%

Hej,

Installed new hdd on my satellite a300. When i run the product recovery cd, I get error <seg. 10> -> cannot read WIM header]
[Error: 23] F:\05425Xsp2.swm. [_wim_create_file: <seq. 10> Fail to read WIM header

Progress 100%

[ERROR: 1812] C:\Program Files\Ulead Systems\DVD MovieFactory for Toshiba\Ulead

DVD DiscRecorder 2.2\Background\16_9_Wide\Spor03_W.jpg

Error restoring image.

The speciefied image file did not contain a resource section.

ERROR: ImageX could not apply VISTA F:\05425XSP2.swm Index 2 from ODD to c:\!
Press any key to countinue......

Waiting for ODD to become avaiable...
ODD Drive F: ready.
Check for medium in drive F: ...
Continue......
Failed to initialize the raid class.
No RAID - continue normally .....

X:\windows system32>

Then nothing happens.....

If I close the window, the recover just start all over again...... ?????

What can be wrong?

Thanks for any solution

Answer:Satellite A300 - recovery failure

>What can be wrong?
Good question. Do you use recovery disc for the first time?
Try to set BIOS to default settings and try again?

By the way: which HDD have you built in?

1 more replies
Relevance 67.24%

Hello,

I have a Toshiba Satellite A300-15B, purchased almost 2 months age. I have created a recovery DVD using Toshiba Recovery DVD Creator as mentioned in the manual. The question is, I have created this DVD 2 months upon purchasing and I used the notebook for this period. Would my recovery disc be the same as a recovery disc created just after purchasing?

My recovery disc's content does not include any setup that I can see which makes me think that I might have created a wrong one. Can I use this disc for re-installing Vista assuming that I am now using Windows XP?

And how many recovery discs are required for this model of Toshiba? I only have one.

Thanks for your time and consideration.

Kind regards..

Answer:Question about recovery DVD for Satellite A300-15B

>Would my recovery disc be the same as a recovery disc created just after purchasing?
The recovery image is always the same. When you use it the notebook will always have the same configuration, the same you got after switching it for the first time.

>My recovery disc's content does not include any setup that I can see which makes me think that I might have created a wrong one. Can I use this disc for re-installing Vista assuming that I am now using Windows XP?
There is no setup.exe because the installation cannot be started under running OS or in some kind of DOS mode. Just put recovery disc into optical disc drive, start your notebook, press F12, choose CD/DVD drive there, press ENTER and follow the menu on the screen. You can use now what you want. after using recovery DVD you will have ?factory settings? again, the same you got after switching it for the first time.

>How many recovery discs are required for this model of Toshiba?
This question is understandable for me. Generally it depends on media you use for creating recovery media. Just follow the instructions in ?Toshiba Recovery Disc Creator?. It can be that you need two DVD-R medias.

Do you have more questions?

4 more replies
Relevance 67.24%

I've lost the recovery disc that I first created & I'm now up the creak after vista crashed on my. I've managed to reload it but have some serious hardware issues that I'm unable to resolve such as being unable to connect to the internet etc.

Can anybody advise where to purchase a recovery disc please?

Thanks in advance

Answer:Satellite A300-1BZ - Where can I buy a recovery disk?

Hello

Of course you can buy a new recovery disk. Just click on the following link and order a new one:
https://backupmedia.toshiba.eu/landing.aspx

By the way, you can download all drivers and tools on the Toshiba website if you have installed Windows from a Microsoft disk:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers

Greets

2 more replies
Relevance 67.24%

hiya folks

I want to do a clean install on my laptop Satellite Pro A300 but only thing is I cannot find my recovery disc which I made. When I first made it is there any where I can get a new one?
I've checked the drivers section but nothing there

thankyou
ade

Answer:Satellite Pro A300 - Can I get a new recovery disk?

Hi

If you have still installed the Vista version that was delivered with the notebook you can create a new recovery disk again.
Just start the Toshiba recovery disk creator and create a new one ? That?s all!

Furthermore you can reinstall Vista if you use the HDD recovery option. Therefore you have to go in advanced boot menu (F8) and select ?repair my computer?. Some files will be loaded and then you can choose the Toshiba recovery option.
But this is only possible on preinstalled Vista version.

In worst case you have to order a new recovery disk from Toshiba directly:
https://backupmedia.toshiba.eu/landing.aspx

Bye

2 more replies
Relevance 67.24%

Hi everyone,

I did a very stupid thing!! I formatted my laptop Sattelite A300-1EI and discovered that i have lost the recovery DVD that i made???

I called the retailer where i bought the laptop but they don't have recovery disks for this model?

How can i retrieve my original VISTA version for my laptop???

Is there anywhere on this site to download it?

I have downlowded all the drivers from this site but i want the original vista back...

Please help

Answer:Re: Satellite A300-1EI - Where to get the Recovery disk

Maybe you could order it from this page:
https://backupmedia.toshiba.eu/landing.aspx

Check it out

2 more replies
Relevance 67.24%

Hi

can any one help?
I am looking for a copy of the recovery CD'S for my Satellite A300.

Answer:Need recovery CDs for my Satellite A300 laptop

Hi scottyy

You can order recovery media under https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 67.24%

Hello, at me such problem. I when have bought tried to change splitting of disks that was not half-and-half and that for disk C it was taken away for example 50 Gbyte and on disk D the remained. And so, suffered suffered and because of that that did not know that in BIOS the tag is established that it was impossible to touch SATA. All has spoilt.
Also has removed even the protected area on a disk for system restoration :(

Help please, I wish to return all as was. It is for this purpose necessary Recovery Disk for Toshiba Satellite A300-15E

In advance thanks all responded

Answer:It is very necessary recovery disk for Satellite A300-15E

Well buddy?. You mad a big mistake? you should have created the Recovery disk firstly before you have changed or deleted something from the disk.

I don?t know if you will be able to use the recovery HDD option but try to press the F8 buttons immediately after you have powered up the notebook.
Usually the menu should appear and there you should choose the first option called ?Repair my Computer? and then Toshiba recovery.

Well if this is not possible then you have no other choice as to order the Recovery disk from this website:
https://backupmedia.toshiba.eu/landing.aspx

Bye

2 more replies
Relevance 67.24%

Hii

Does anyone have the recovery disk 2 for A300? I have disk 1 but missing disk 2 :(
Hope someone can help me or send me a link from where i can download the disk 2

Thankyou

Answer:Satellite A300 - Need recovery disk 2

Hi amrit711,

The Toshiba recovery disk you can?t download so hopefully you find something with the same model where you can get recovery disk 2.

But you can also order the recovery disk from Toshiba directly. It?s not for free but these disks are pretested and should work properly:
https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 67.24%

Hi

I bought a Toshiba Satellite A300 with Windows Vista pre-instaled but I didn't received any CD or DVD with Vista. I just have a sticker with CD key on the back of the laptop.

I installed Windows XP from personal reason and now I want to install again Windows Vista using the folder HDD Recovery.
Can I install or I should have made a DVD with Vista ?

Thanks

Answer:Satellite A300 - Need recovery disk

Sorry but now you are not able to install Vista with the HDD Recovery. The HDD Recovery can only be used on an installed Windows Vista system because XP doesn?t support this function.

Your mistake was that you didn?t burn the recovery disk with the Toshiba Recovery Disk Creator in Vista and now you are not able to burn it.

The only way to get Vista back is the recovery disk and now you must order it on the Toshiba website or from an authorized service provider.
https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 67.24%

Trying to recover my A300, when on recovery disk 2 it restores for a while then I get the message:

Error: 10-FC12-045D recovery error

Just wondering whether ordering a new set of recovery disks from Toshiba would be worthwhile or whether there's another solution to the problem?

Answer:Recovery failure on Satellite A300

To be honest I have never saw such error but on this forum I saw several complains about similar issues.
In my opinion, before you order anything, try to obtain other HDD for testing purposes. Exchange HDD and try to install recovery image again.

Can you do this?

2 more replies
Relevance 67.24%

Hi!

I have my Satellite A300 with Windows Vista for a while now, but it started to give me some problems a few days ago.

All of a sudden, windows won't load, it frozed on the windows logo screen. Since i needed to recover the files i installed ubunto from a cd and i was able to get the files out safe. Now, and since i have this partition, everytime i get to the screen where i chose the partition and try to start windows, a black screen shows and nothing happens! So i thought let's format everything but I just can't make it to the recovery screen or terminal. I've tried every key and trick I could find or remember of, but it still goes to the partition screen.

I have lost track of my recovery CD so, is there any way I can format without the recovery CD?

Thank you!

Answer:Satellite A300-1M1 - Format without recovery CD?

Hi

If you want original factory settings back your only chance is Toshiba recovery disk. Generally speaking it?s no problem if you have lost it because you can order it from Toshiba but this service is not for free:
https://backupmedia.toshiba.eu/landing.aspx

Alternative you can use a normal Microsoft Windows disk. All drivers and tools you can get on official Toshiba website.

Check this!!!

2 more replies
Relevance 67.24%

Hi,

Does anyone know if a windows Vista DVD should have been included in the box? If not how do I receive a copy?
Thanks for your help.

Martijn

Answer:Should I get recovery DVD with brand new Satellite A300-16I?

Hello

As far as I know all new Toshiba notebooks are delivered with HDD recovery image. That means there is no recovery media anymore. When you start your notebook model you will see a ?reminder? about creating recovery DVD.
Can you find on the desktop shortcut for ?Toshiba Recovery Disc Creator?? If yes please start it and create recovery DVD.

Can you find ?HDD Recovery? folder on second partition? Please do not delete it.

2 more replies
Relevance 67.24%

I have tried using the Toshiba Recovery Disc Creator numerous times and with many different brands of Discs to create the recovery disc.
However every time just as the laptop is just about to finish burning the disc, there is an error and the operation could not be completed.

I don't believe there is a problem with the drive as I have used it for many other things including watching movies with no problem.
Could Toshiba please mail me a recovery disc instead?
Thanks

Answer:Cannot create a recovery CD for my Satellite A300-1BZ

>Could Toshiba please mail me a recovery disc instead?
Mail a recovery disc? Very interesting. To mail 4 GB image is not so easy.

I don't know what are you doing but if you want good tip then use Verbatim or TDK DVD-R empty medias. Use DVD-R only.
I have Satellite A300 too and I created recovery DVDs successfully.
Do you use DVD-R medias too?

2 more replies
Relevance 67.24%

Hi
I have a Toshiba Satellite A300- 1EG.

I created 2 recovey disks as required in the "Toshiba Recovey Disk Creator". I created the first one (Disk 1) 2 weeks ago and the second one (Disk 2) today because I didn't have 2 DVDs in hand.

My first question is does it matter if I have left a period of time between the two creations will if affect the recovery if I ever need to use them?

My second question is do both recovery disks just recover the operating system eg: Windows Vista or do they recover everything that was saved on Local Disk C at the time they were created?

My final question is if it happens my operating system dies, do I just power on the laptop and put in recovey disk 1 and then 2, (if that is not how I do it can someone please tell me how to?)

Regards

Answer:Satellite A300-1EG - Why do I need 2 recovery disks?

Hello

When you use ?Toshiba Recovery Disc Creator? you can see there option for using different empty medias. On some notebook the image can be burned on one empty DVD and on some models you need two of them. It depends on recovery image.

For my Satellite A300 I used two DVD-R medias. I have created recovery images for several notebooks and it is not known to me you have interrupt recovery creation and continue it later. When the first media is finished you must put second empty media and burning procedure will continue automatically. As far as I know there is NO option for disc 2 creation only. Please be careful about that.

I recommend you to obtain two empty DVD-R medias and create recovery DVDs at once.

When you use recovery DVD the whole HDD will be deleted, not just partition C. that means all data saved on HDD will be deleted. If your notebook has two HDD the recovery procedure will affect HDD1 only. Be careful about that and before you start recovery procedure back up all your important data.

Final answer to final question ;) ? when you want to install OS again using recovery media do follow:
Power your notebook ON and press F12 to enter boot options
Put recovery media 1 into optical disc drive
In boot options choose CD/DVD drive and press ENTER
Follow the menu on the screen

Of course, start with DVD1 and when asked insert second DVD.

4 more replies
Relevance 67.24%

My daughter dropped the laptop. I now get a blue screen that says that I need to press F8 to start the recovery process. But when I press F8 nothing happens.. Any ideas? I would really appreciate any feedback.

Answer:Satellite A300-21H - Can't start the HDD recovery

> My daughter dropped the laptop. I now get a blue screen that says that I need to press F8 to start the recovery process. But when I > press F8 nothing happens.

I think there is something wrong with hard drive after drop. Can you enter the Bios (f2 on startup) to check if hdd recognized. You can see it on main page or boot option.

4 more replies
Relevance 67.24%

I want to recover my Toshiba Satellite A300-1G5 Notebook to factory settings state. But when I run the HDD recovery wizard, It says that the file or program is not found.
And when I checked to my Partition drive its not also there.

Please help me or post information on what to do or where to get the HDD recovery thing..

Thank you and I hoping for your response from the great community of this forums.\

Answer:Cannot start HDD recovery at Satellite A300-1G5

Hi,

Seems to me, the Hdd recovery image is already not available on your hard drive. Did you make a recovery disk? Otherwise, you need buy from Toshiba, the more information for ordering is:

https://backupmedia.toshiba.eu/landing.aspx

3 more replies
Relevance 67.24%

I have a Satellite A300-1MC. It will not boot into windows just sits there with the welcome screen. PC diagnostics indicate that the Hard Drive is faulty. I have replaced the MK3252GSX hard drive with a Toshiba MK3276GSX - both are 320Gb.

When I insert the recovery discs I get the following message when Disc 2 is running "Please insert next recovery medium containing file D:\08008XSP6.SWM.

Any ideas where I go from here"?

Answer:Satellite A300-1MC - Recovery is not working

Hi

Are you sure that you Recovery disk was created properly?
Did this recovery disk function properly in the past?

Did you label the disks correctly?

It looks like there is a problem with recovery disk.

3 more replies
Relevance 66.42%

I have Satellite A300-14s

My brother transfer some songs and videos to this partition (Data:)

The good thing is that the original recovery files are there and not modified (i check it because i have a300-20a)

my A300-14s has HDD recovery folder and *.bin file (this is the one has problem) but my A300-20A has HDD recovery folder and **.TAG file

I have deleted all songs and videos in the data partition and then try to recover my A300-14s to factory default...
I restart then press F10 at begning but i got and error...

This is

[http://img25.imageshack.us/img25/4292/dsc00004xi.jpg]

plz help

I can't recover

Answer:Satellite A300-14s - My brother modified hdd recovery

Hi

Try to this:
Press F8 while the notebook powers up.
Then choose ?Repair my Computer?.
Now new window should appear and then you should choose Toshiba HDD recovery.

Usually this should start the HDD recovery procedure.

4 more replies
Relevance 66.42%

I recently purchased this laptop and I get this reminder to make a recovery disc, but the link to the program doesn't work.

When I found the recovery disc program in its original folder it still refused to open.
My laptop just 'thinks' for a moment and then pretend nothing has happened.

Does anyone have a solution for me?
Maybe I could download a working version of this program...?

Answer:Making Recovery disc for Satellite A300-16I

Hi

From my own experience after a third system restart a recovery reminder appear saying you need to create a Recovery DVD.
You said you found the recovery disc program in the original folder? well, as far as I know there is a ?TOSHIBA Recovery Disc Creator? shortcut on the desktop.
Use this shortcut to star this application.
If this is not possible then you could try to recover the notebook again and then to create the recovery CD.

To start the recovery process you have to press F8 button immediately after system start.
Then choose the option called ?Repair your Computer? and follow the instruction on the screen.

Bye

2 more replies
Relevance 66.42%

Well at first my computer started doing weird like I wasn't able to use firefox or msn since it said there was no connection. But it showed there was a connection and my download manager was still downloading. So I restarted my pc and it couldn't make a connection so eventually I could make a connection through my Iphone but my normal lan connection wouldn't start working again.

So I thought I'd backup my documents and just reinstall my whole pc. I used the f8 button at startup and it said everything its supposed to say and I clicked on reset to fabric settings (or something like that). So It started up and after it installed it gave a error. Though it started to configure vista, so I thought it would be fine. But when it rebooted it did the toshiba startup thing and then a loud beep with a total black screen.

I tried to do the recovery again but it didn't gave the option when pressing f8. I tried every thing to fix it but nothing worked.

Eventually I managed to install vista off a disk I still had left from my computer from an other manufacture.

However now It won't install any windows updates (it downloads but then gives a error) and a lot of drivers are missing wich when I install them don't work.

Is there any way this can be fixed? I still got the recovery files on my d partition, But it won't give the repair your computer thing that you get when pressing f8.

Answer:Total crash after HDD recovery on Satellite A300

Hi!

This is strange because normally after using the recovery disk all should work and all drivers must be installed.

In your case I would try to reinstall Windows again with the recovery disk. Maybe you should before format the HDD with the Microsoft installation disk and then using the recovery disk.
By the way, did you create the recovery disk? You can do this with the Recovery disk creator and it?s preinstalled on your computer.

Good luck and tell me what happened.

Bye

2 more replies
Relevance 66.42%

Hello,

I have a problem with Recovery Disc Creator. When it burns the 1st DVD disc an error occurs. It says "Unexpected error occured. Error code: 0E01B5-26-2A031000".
I have Toshiba Satellite A300-1NA.

All of the updates are installed, and generally the system is "clean". I suspect that this problem is caused by my DVD-RW drive (MAT****A UJ880AS) but I cannot find new firmware for it. Thanks in advance for any help.

Best regards
Maciej

Answer:Re: Can't create recovery discs on Satellite A300-1NA

Hi!

Firmware updates you can get on the Toshiba website but for your Satellite A300 with Mat****a drive I didn?t find one.

Have you tried DVD?s from different manufactures? I use always Verbatim disks and never had problems with it.
Check this!

Bye

4 more replies
Relevance 66.42%

Hi,
Trying to fix a mates laptop, had lots of issues so tried to put it back to out of the box state but when loading the disc's on 2nd disc fails to read and I get an error. Tried buring it at min speed but still no good.
Just wondering where I would get them from. Model number is: PSAG4A-02E00M.
Cheers,
Matt

Answer:Recovery Disc's needed for Satellite A300

Hi,

1. have you tried to restore from Hdd image as written in this article?

http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=58

2. but when loading the disc's on 2nd disc fails to read and I get an error

It looks like it scratched and some files can't be read. As I know, the 2nd Dvd contains drivers/utilities that you can install yourself from Toshiba driver pages. It depends on model:

[European Toshiba Driver Page|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

[Canadian Toshiba Driver Page|http://support.toshiba.ca/support/Download/ln_byModel.asp]

[Australian Toshiba Driver Page|http://www.mytoshiba.com.au/support]

[American Toshiba Driver Page|http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp]

> Just wondering where I would get them from

Unfortunately, it's not free to order recovery disk, you have to pay. For European models, you can order here:

[Recovery disk|https://backupmedia.toshiba.eu/landing.aspx]

For other models (country regions), you should check on above mentioned sites

2 more replies
Relevance 66.42%

Hello to everyone!!

My cousin interrupted the first boot of Vista, resulting in an constant error while powering up the laptop (saying something about disconnecting a camera or a media player). I decided to perform a clean install of Vista Home Pre and everything rolled ok.

I have a back up of the HDD Recovery Folder and tried to burn a DVD using as prototype my recovery dvd (A200-1J0) which prooved non-bootable.
So, I would like to know whether it is possible to make a recovery dvd manually (meaning without the wizard mentioned in the user manuals) for the Toshiba A300-17N laptop.

Answer:How manually create Recovery DVD of Satellite A300

Something like this is not possible. If the HDDRecovery folder still exists on second partition please start your notebook and press F8 for advanced boot option. Use first option on the top for computer repair. Follow the menu und choose option for Toshiba HDD recovery.

Install OS again and create recovery DVD using preinstalled Toshiba tool.

1 more replies
Relevance 66.42%

I have a Toshiba Satellite Pro A300 2CW. I bought it with Software Windows XP (included in a CD), which worked perfectly for years. I have reinstalled it several times during this years, but now the CD has deteriorated and it doesn't work anymore.

Originally the machine had WIndows Vista installed with DVD recovery creation option and a HDD recovery option, but I think this is not possible for Windows XP.

Do I have any options?Where could I buy the original Windows XP CD?

Thank you

Answer:Satellite Pro A300-2CW - Need Recovery disks with Windows XP

Hi

You can try to order it on https://backupmedia.toshiba.eu/landing.aspx
Other way you can install own WXP version. All WXP drivers, tools ad utilities can be downloaded from Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp

1 more replies
Relevance 66.42%

Hi

sorry for my English, I?m French.

I have purchased a Toshiba Sat A300-1fg and I have burn the dvd recovery before installed XP.

And now the first DVD can't be read correctly and I can't restore my notebook for sell it
(the fan is too loud, media keys don't work with another player of wmp.... i'm not happy with this notebook)

I search anymore can be upload me a DVD copy please.

thx

Best regards

Answer:Satellite A300-1FG psag4e does not read Recovery DVD

Hi

Try to copy this Recovery DVD on other computer and then try to boot from the burned DVD.

By the way; The Media buttons can be use din WinAmp. You have to enable the option in WinAmp settings. The fan is not loud and cooling settings can be changed in Power Saver settings.
These are some tiny tips ;)

12 more replies
Relevance 66.42%

I have no prior experience with making a recovery CD and I hear ya only get one shot to do it, and so have to be careful not to screw up. Hence.. I am posting here so I can get some clear instructions on how to achieve this. I am not going to rush into it like a bull in a china shop because that's usually when i make mistakes.
Would love someone to guide me thru doing this step by simple step if that is not too demanding to ask. I would very much appreciate it.

All I know is I have the Toshiba recovery disk creator in Program Files...I will install ImgBurn if that's OK to use, but would love some guidance helping me thru this so I dont mess up.

tmany kind thanks,
Kes

Answer:Creating recovery CD for a Satellite A300-1J1 Laptop

Hello Kes

Toshiba takes care of you and made simply way to do this. ;)

You must not install anything. Just start Toshiba recovery creator tool and put high quality empty DVD-R media and follow the menu on the screen. That?s all.
I recommend you to use TDK or Verbatim medias. I have tested both of them and they work for sure.

9 more replies
Relevance 66.42%

Hi all

I?m planning to buy new laptop of model Satellite A300-1GR for my work.
But I found that there's a problem. Many users face when dealing with laptop in general which is the deletion of partition when using Recovery disc at any OS failure & losing there data on other drives.
So what I want is a solution that makes me able to do the follow:

1- Have many Drives C, D , E , etc?
2- The OS is on C drive & my work data on others
3- In case of any problem or failure in the OS I can format just the C: drive & install another OS on it without any removing or modification on the other drives at which my data kept on
4- Ability to install different OS?s like Windows Vista , XP or Linux

Simply i just want my new laptop to be like my Desktop PC ( Full controlled by me )

Best Regards

Answer:Questions about Satellite A300 HDD pratitions & recovery

Hi buddy

Will try to provide a little bit light into this case ;)

The A300 is equipped with the HDD Recovery function. This means that you can recover the notebook without the OS DVD.
The installation will start from the HDD.
Of course there is a possibility to create a Toshiba Recovery DVD using a preinstalled Toshiba Disk Creator.
After the creation of Toshiba Recovery DVD you can format the whole HDD and can delete all partitions (if you want).

So now we come to the point which you have asked;

The whole HDD will be formatted (also the partitions) if you would use the Toshiba Recovery DVD.
Why? I think the Recovery DVD was designed for one purpose; settings the notebook back to the factor settings.
And this is what the Recovery DVD does. It sets everything back to the first state.

So if you want to keep your data on the other partition then you shouldn?t use the Toshiba Recovery DVD but an original Microsoft Windows OS disk.

Furthermore it?s always advisable to backup the data on a external HDD for example.
Then it would be no problem to get back the data on the notebooks HDD.

CHeers

1 more replies
Relevance 66.42%

Hi,
I just bought a Satellite Pro A300 with Windows XP.
I want to know how I can, or if I need to, create a recovery disc which will reset the machine to its original state.
The information included gives instuctions on how to do this for machines installed with Vista but not for XP.

I know I can recover from the hidden partition but in case that option isn't possible I would like to be able to recover from CD or DVD.
There is a Product Recovery CD included which just says 'MS Windows XP' so I guess it won't include drivers or the Toshiba software?

Any help appreciated,
Thanks,
Mick

Answer:Satellite Pro A300: How can I create the Recovery Disc

Hi

Do you have preinstalled Toshiba software called ?TOSHIBA Recovery Disc Creator??

Please check this.
Using the TOSHIBA Recovery Disc Creator you can create the Recovery Disk.

But if your notebook was already preinstalled with Windows XP then a Recovery CD or DVD should be included.

Did you check all items in the box?

7 more replies
Relevance 66.42%

I got problem in my Satellite A300-y00, which are virus, trojan or more threats.
I want to ask if is it possible to resend back to Toshiba to reformat as a new one again?
I mean that will they install the same software with included everything such as a new one in order to delete all threats.

Will it cost more?

Answer:Can I send Satellite A300-y00 for recovery procedure

Hi

As I?m not mistaken the A300 was equipped with the HDD recovery option.
This means that you can recover the notebook and set it to factory settings very easly and without usage of the Recovery DVD!!!

So power up the notebook, press the F8 button and choose the option called ?Repair my Computer?.
Then a new screen should appear and there you will have to choose the last option called Toshiba Recovery or something like that.
Then follow the instruction on the screen.

The whole HDD should be formatted and new OS with all the drivers should be installed

19 more replies
Relevance 66.42%

i'm trying to create recovery disc for the first time(bought laptop before 5 days) and just a little before the end the creator stops:


Failed to read file.
F:\06343XSP5.SWM
(Error code: 020150-20-00000000)


What is going wrong?

Answer:Satellite A300-15A can't create recovery disc

Are you using good quality Discs?

Try TDK DVD-R media.

2 more replies
Relevance 66.42%

I bought a Satellite A300 few days ago, it auto installed Vista without CD when I opened it.
Is it spouse to come with a vista CD/DVD or do I have to burn one with Toshiba recovery disk?

Answer:Satellite A300 - and Vista recovery Question

Hi, You should burn one dvd with recovery tools for future, toshiba dont gives cd's with a300 :) i also have a300

4 more replies
Relevance 66.42%

I have just brought a Toshiba Satellite A300-1j1 laptop, and at the same time got the upgrade to Vista Ultimate disk at the same time.

Straight out I went to do a soft upgrade to Ultimate, which failed, and the laptop restored to Premuim.

Stupidly I then immediately went for a hard install to Ultimate which 'worked', but obviously the drivers to run the laptop was not installed, so I decided to go back to Factory settings, and try getting Ultimate on again.

However using F8 on boot up is not giving me the option to restore, and I have since learnt that I should have make a set of recovery disks, which I did not do.

The installation data is still on the 'E' drive, so is there anyway I can still use it to make these discs, or what should I do?

Thank you for your help,

Ian

Answer:Satellite A300-1J1: Cannot use F8 to start the HDD recovery procedure

>?.and I have since learnt that I should have make a set of recovery disks, which I did not do.
That is your biggest mistake.
>The installation data is still on the 'E' drive, so is there any way I can still use it to make these discs, or what should I do?
There is nothing you can do to create recovery DVD. if you want to have original recovery DVD you must buy it.
For this check please https://backupmedia.toshiba.eu/landing.aspx

Sorry buddy :(

1 more replies
Relevance 66.42%

Hello,
I have a Toshiba Satellite A300-1MM laptop. I want to factory reset the Windows Vista OS, but leave the other OSes I have in the state they are. I am attaching a screenshot of the disk management selection and the :My Computer:.
I want to reinstall Vista from the recovery disk to the partition I currently have them, without messing other ones.
As boot loader I am using GRUB 2.0 (Ubuntu 14.04)

I want to keep the current partitions and replace Vista.
(I know that i have accidentaly deleted the recovery partition, but i have recovery disks so do notworry)

Thanks in advance , for any other definitions, ask me.

More replies
Relevance 66.42%

Hi,

I'm having some issues making the Recovery Disc (see http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=38328&tstart=0 ), but as the main file burned to the discs is a 1+ GB *".exe"* one, I am starting to wonder if the discs are really expected to be bootable... after all you'd +usually+ require a windows envionment to execute such a file.

Or maybe the files required to "run" that .exe are supposed to be in the bootable part of the disc?

Thanks in advance.

Answer:Are Recovery Discs bootable? - Satellite A300

Hi

I don?t know how you have burned the Recovery disk but you should use definitely the Toshiba Recovery disk creator tool.
This tool burns the Toshiba image and creates the bootable recovery disk.

And yes, the recovery disk is bootable and if you want to start the recovery procedure you have to boot from it.

Greats

6 more replies
Relevance 66.42%

Hi. I have a Satellite A300 laptop.
I saw that my computer has 1 hidden partition in the first drive and another recovery file in the second drive.

1) What is the difference between the 2?
2) I accidentally deleted the file on the second drive, and now I'm unable to create a recovery disc, so I need to order a new one.

What does the disc contain? does it only install the operating system, or will it also include some of the software that came with my laptop (Microsoft works, camera assistance software and so on...)

Thank you.

Answer:What does the recovery disc include - Satellite A300?

1) This is pretty easy. The hidden partition contains the Windows recovery environment and the file on the second partition in the HDD recovery folder the factory settings or lets an image of it.
The recovery environment is a Vista feature, not a Toshiba. If you want the factory settings back or reinstall Windows you need the HDD recovery function or the Toshiba recovery disk.
Here is a useful link about the recovery environment: http://en.wikipedia.org/wiki/WinRE

2) The reason why you can?t create the recovery disk is that you have deleted the file. Normally on the second partition in the HDD recovery folder is the image for that and this can also be used for the HDD recovery function. Therefore you must go in the advanced boot menu and select ?repair my computer?. But now it?s too late and you can?t use this feature.

If you want the recovery disk you can order a new one from Toshiba directly:
https://backupmedia.toshiba.eu/landing.aspx
The recovery disk contains the operating system and all drivers and tools from Toshiba that you need for the notebook.

I?m right that you didn?t look in the user manual?! ;)
Otherwise you would know all what I have told you.

2 more replies
Relevance 66.42%

Trying to reinstall XP.

Restarted the machine with the recovery disk, the recovery application starts up. Select options and then it starts unpacking. Gets to 7% and stays like that for over 2 hours.
I tried re-installing Windows XP from my own disk but that fails with a message saying cannot detect Hard Drive.

The hard drive is present and can be seen in the BIOS.
Should I leave this recovery thing running over night?

Is there any way I can re-install the drive with XP?
Can I install a new drive and re-install XP?

Any help would be appreciated.

Answer:Satellite Pro A300: Windows Recovery Problem

Is maybe recovery disc damaged?

Missing HDD message is typical for WXP installation and on this forum you can find tons of threads with exact explanation why this happen and what you can do about it.

Just for example check http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35787

Test it again with own WXP installation to be sure HDD is OK.

3 more replies
Relevance 66.42%

Hi all, I have a Satellite A300 that has been giving me problem in the past few weeks...

I am using Windows Vista

about 2 months ago, teh laptop start to have problem, it will restart itself automatically before getting into windows (while in the windows loading screen, no blue screen, screen just turns black suddenly and restarts itself), but it will eventually get into windows successfully after a few loops

but from about 3 weeks ago, it just keeps looping and never get into windows, good news is it can enter safe mode no problem

I did every thing I can to try rescue it, like messing with msconfig, drivers, removing rams etc but no luck

so i back up everything in safe mode and decided to factory restore the machine, but the problem is that when I start the computer pressing 0 and gets into the recovery screen, the restart loop happens again!

any idea? or is there any other way to perform factory restore without touching the windows installed in my laptop? is it a hardware or software issue?

i thought about creating recovery disc but my cd drive is not working properly, and i dont want to risk buying an external cd drive not knowing if the problem can be fixed...

many thanks!

Answer:Re: Satellite A300 cant boot, cant use factory recovery

>...i dont want to risk buying an external cd drive not knowing if the problem can be fixed...
That?s right but you must understand that it is not easy on this virtual way to offer exact explanation and diagnostic to your problem.

It is not easy to say if this is software or hardware related issue. best way to test is recovery image installation. Recovery image is tested and if there is no some hardware problem notebook should run properly. How to install recovery image you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

>...or is there any other way to perform factory restore without touching the windows installed in my laptop?
Something like this is not possible. Windows that you use now must be reinstalled. I don't know why you notebook restarts but this is also risk for recovery image installation. In case that recovery image installation will be interrupted you will have two problems:
-original recovery image saved on your HDD will be unusable
-you will not be able to start t again

In your situation best thing is to minimize this risk and have original recovery DVD that can be used if something goes wrong.
>but the problem is that when I start the computer pressing 0 and gets into the recovery screen, the restart loop happens again!
Can you please explain what happen exactly? Does notebook simply cut off/go off and then restart again or what?

5 more replies
Relevance 66.42%

I bought a new Satellite A300 and now I have to reinstall Windows Vista. My question is:

Through the recovery disk do I already have all the necessary drivers for my computer?
Do I have to download them online one by one?

Thank you for your help

Ciao

Michele

Answer:Satellite A300 - Does the recovery disk contain all drivers?

Hi

Yes, the Toshiba recovery disk contains all drivers and tools for your notebook. After you have used the Toshiba recovery disk you have the same settings as you have started the notebook the first (out of the box). So that means the disk contains an image of ?factory settings?.

The disk is very easy to use: You have only to boot from it and follow the screen instructions. Windows and all drivers will be reinstalled in few minutes.

3 more replies
Relevance 66.42%

Hello!

I have Satellite A300 with windows vista recovery disc and I want to upgrade to windows 7! how can I get one?
how much does it costs?

Answer:Satellite A300 - How to get Windows 7 recovery disk?

Hi

The upgrade is pretty easy: Just purchase a Microsoft update disk and then you can update Vista to Windows 7 ? That?s all!

But if you bought your notebook from June 26, 2009 to January 31, 2010 you can order a Windows 7 upgrade disk directly:
http://eu.computers.toshiba-europe.com/innovation/generic/windows7-upgrade

2 more replies
Relevance 66.42%

I have an A300-1MO.
Can I use any Toshiba recovery disk \?
Or is there like a specific one for my A300-1MO?

I'm like a total noob....
Somebody pls help...!

Answer:Re: Satellite A300-1MO - Can I use any Toshiba recovery disk?

No, you cannot use any Recovery disk? you have to use the recovery disk designed for this notebook model.
The point is that recovery disk contains a image. Image is a package which contains OS and Toshiba drivers?
If you would use another recovery disk then the image would be installed with not compatible drivers and this could lead to further problems?

Every new Toshiba notebook provides a Toshiba Recovery Disk creator tool. This tool can create a recovery disk?

2 more replies
Relevance 66.42%

I have a Satellite Pro A300 and I need to factory reset. I have learned from my computers teacher that there is an unknown virus on it. Apparently it was downloaded when I downloaded Malware Bites. I got the laptop for free from Set-BC because I have muscular dis-trophy and get tired writing.

My teacher told me that I need to Factory Reset it, but when I received the laptop, it had had everything installed on it, (kurzwell, Chrome, etc) so I don't have the factory reset disk. Also, the virus has disabled everything that has the slightest thing to do with internet, (Chrome, I.E., Firefox, Outlook, malware bites, etc).

Is there any possible way that I could factory reset the laptop without needing the disk.
Any suggestions will help.

Thanks

Answer:How to install recovery image on Satellite Pro A300?

Hello Steve

Notebooks delivered without recovery disc have recovery image saved on HDD and if you still use original preinstalled operating system you can try to install this recovery image following recovery procedure. How to do this is described in user?s manuals document or you can do this following instruction described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

Does it work for you?

1 more replies
Relevance 66.42%

First of all, sorry for my very bad english.

I bought a portable PC 9 months ago, Toshiba Satellite A300. I have had problems with a virus and the result is that despite of the actions of clean and disinfection, the computer remains infected and I have denied the access to the hard disks and regedit.

I have thought to recover the operating system preinstaled of factory (I hope it is the solution and not the formatting) and Barrie told me to check http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

I did it but the PC says that it's imposible because there's no files. I didn't make a rescue CD (so newbee).

What can I do?

Answer:Satellite A300 - How recover the OS without having Recovery disk?

Hi

Did you already install another OS?

Normally the HDD recovery as Barrie suggested always works if the preinstalled Windows from Toshiba is installed but sometimes due viruses it could not work. I mean if you don?t have success with this you will need a Toshiba recovery disk to get back factory settings.

A new recovery disk you can order here:
https://backupmedia.toshiba.eu/landing.aspx

Bye

3 more replies
Relevance 66.42%

Hi ..

my friend has this laptop: Satellite A300-20P.

I'm not sure what he did, but he installed Windows Vista Home Premium 64bit, then 32-bit again. The whole thing messed up.
Anyway, he didnt make a recovery disk for his laptop (damn thing). Now, becasue I have a Toshiba laptop too I know that there is Recovery on the Harddisk on the D partition (not the windows partition). I tried to use "Repair Windows" booting Windows, when I try to restore the whole PC from a backup media it says " No backup media found", now I'm not sure if the recovery sector still available or not, because the Windows cant boot. So is there away to find the recovery media?

If this mission impossible, then I have Windows Vista Ultimate to install and I can download the drivers from the site? The problem is, how I will make recovery media when install the Windows and the drivers ?

Please this is urgent.

Thanks in advance!

Answer:Satellite A300-20P - How to restore from Toshiba recovery?

Hi

To be honest I?m confused at the moment because first you wrote about a problem of your friend?s notebook and you wrote something about your own notebook where you try repair Windows.
So I don?t understand what you mean exactly.

But fact is you have two possibilities to restore factory settings:
1)Use the Toshiba HDD recovery option. You can start it if you go in advanced boot menu (F8) and select ?Repair my computer?. Then follow the screen instructions.
The first partition of the HDD will be wiped and you get factory settings back.
2)Use the Toshiba recovery disk. It?s very similar to HDD recovery option but whole HDD will be wiped (all files will be deleted). After this you have factory settings back, too.

So that?s all what you can do to restore the factory settings. If the HDD recovery option not work and you don?t have a recovery disk you have to order a new one from Toshiba directly.

Alternative you can use a Microsoft disk to install Windows and then download and install all drivers and tools from Toshiba website step by step.

6 more replies
Relevance 66.42%

I have just created my two recovery DVDs for my new computer and I want to know if I still need my 113GB partition on my computer?

Answer:Re: Satellite A300-27H? Do I need HDD Recovery partition after creating DVD

Hmm?.
The Recovery disk would set the notebook back to factory settings? this means that the Recovery disk would format the whole HDD and would create the same partitions like at the first day of purchase? it should create also the HDD recovery partition too?

Therefore in my opinion you could delete it if you don?t want to have such partition on your HDD?

Cheers

5 more replies
Relevance 66.42%

Hello,

I was wondering if anyone knows how to recover the Satellite A300-1J1. My laptop has Windows Vista home premium, I'm not too sure about the number of "bits" because the sticker at the bottom of my laptop is faded. My serial number is 8811896Q.

I shut down my laptop and when I tried starting it up the following morning it said "Windows failed to start. A recent hardware or software change might be the cause". Then it goes to this screen which says "System Recovery Options: the installed programme cannot start. Click OK to turn off the computer".

Does anyone know how to recover my laptop without having to lose (wipe out) all data currently on it, such as windows documents etc.?
Thanks

Answer:Satellite A300-1J1 and system recovery options

>Does anyone know how to recover my laptop without having to lose (wipe out) all data currently on it, such as windows documents etc.?
In the past we have discussed very often about this theme. Anyway it works on this way:
- When you use recovery DVD for OS installation whole HDD will be deleted including data on all partitions
- If you use HDD recovery option only partition C will be deleted and all data saved on second partition will be still there
So try please HDD recovery installation following instructions on Toshiba document.

1 more replies
Relevance 66.42%

I have satellite A300 with pre loaded Vista home premium OS, due to some reason I had to format the entire disk and I lost my OS recovery partition.

Can any one help me in getting my os partition?
I had checked with the service centers they said I can use the OS recovery partition of similar model.

So I request everyone if anyone can provide me the OS partition, I would be thankful to them.

Please contact me at [email protected]

regards
anup

Answer:Satellite A300 - I lost the recovery partition

Hi!

I think you did understand something wrong.
On the Toshiba notebooks there is no recovery partition, they have a HDDrecovery folder that contains the factory settings.
I recovery partition that you mean is a Window Vista feature, not a Toshiba.
Here is a useful link to this: http://en.wikipedia.org/wiki/WinRE

The HDD recovery folder is stored on the second partition of the notebook. You can use the HDD recovery function if you go in the advanced boot menu, choose ?Repair my computer? and select the Toshiba HDD recovery function.
But I think this is too late now?

Did you burn the Toshiba recovery disk? Normally you can burn the factory image that is stored in the HDD recovery folder on a DVD by using the Toshiba recovery disk creator. Therefore you get always a remember message or popup that you have to do this.

If you didn?t do this and you want the Toshiba recovery disk you must order a new one. You can do this here: https://backupmedia.toshiba.eu/landing.aspx

I hope I could help you. Do you have more questions?

Bye

2 more replies
Relevance 66.42%

Hello, I have a Toshiba A300 1j1 and have had it for two years. Recently, when attempting to start the laptop just a blankscreen appeared whilst the laptop appeared to be running, but eventually the screen appears. But more alarmingly I get a "BOOTMGR is missing, press ctrl+Alt+Del. So I run the recovery process as I made recovery CD's a year earlier. But I can't complete the process bec. I get...

Checking for HDD1
HDD1 not found!
Try to remove all letters from potential partitions on HDD 0 ...
Try to remove all letters from potential partitions on HDD 1 ...
Microsoft DiskPark_Version 6.0.6001
Copyright <C> 1999-2007 Microsoft Corporation.
On computer: MINWINPC

Disk 0 is now the selected disk.
Diskpart succeeded in cleaning the disk.
Diskpart succeeded in creating the specified partition.

Partition 1 is now the selected partition.
Diskpart successfully assigned the drive letter or mount point.
100 percent completed
Diskpart successfully formatted the volume.
Diskpart succeeded in creating the specified partition.

Partition 2 is now the selected partition.
Diskpart successfully assigned the drive letter or mount point.
100 percent completed
Diskpart successfully formatted the volume.
Diskpart succeeded in creating the specified partition.

Partition 3 is now the selected partition.
Diskpart successfully assigned the drive letter or mount point.
100 percent completed
Diskpart successfully formatted the volume.
^^^^^^^^^
Copy Recove... Read more

Answer:Recovery process FAIL on Satellite A300

Hey mate,

> ERROR: Copying of Recovery Base files failed!
Sounds like a faulty or scratched recovery disk maybe?

In my opinion you should try another disk, . e.g. Microsoft Windows disk. If your recovery disk is faulty, the Microsoft disk should work properly. After this you can download and install all drivers and tools from the Toshiba page.

In worst case it?s a hardware malfunction, HDD or something else, but you should test another disk firstly. ;)

2 more replies
Relevance 66.42%

Hi,
I have tried to reinstall my Vista home premium on my Satellite A300-247. I have buit-in OS. I have done it axactly according to manual (restart - F8 - repair your computer - ......) When I clicked on Toshiba HDD recovery in recovery tools system wrote me this:

" the recovery of the OS is impossible
Could not find HDD recovery folder on second drive of the first hard disk.
There is no valid HDD recovery enviroment on this computer. "

I want to ask what should I do reistall my OS. I have no disc with OS and tool for creating backup disc doesnt work.
Is there some option to get from Microsoft or from Toshiba my OS on DVD?
If I use this tool for reinstalling OS, will I loss all informations on drive D ( Vista is on drive C)

Thanks for answer

Answer:Satellite A300-247 cant find HDD recovery folder

Hi

Seems the HDD recovery does not work.
Possibly something has been changed on the HDD recovery partition or the recovery files has been deleted?

Usually it?s always advisable to create a recovery disk at first. This should be done at the beginning and such recovery disk is always helpful if something would go wrong with HDD recovery or with the HDD?

Now you cannot recover the notebook because you don?t have such disk and the HDD does not work?

What to do???
Well, I think you would need to order new disk.
You can do this here:
https://backupmedia.toshiba.eu/landing.aspx

Greets

2 more replies
Relevance 66.42%

EDIT:
Thanks to a recovery software I have saved the "HDD RECOVERY" folder an all the other files that were in D:(the damaged partition) into another folder in C:

Now how can I burn a recovery cd/dvd starting by this folder ?


--------------
I've the Satellite A300-21w that came with a 320 GB HD splitted in 2 partitions: C: & D an Vista Home premium:
The D: partition containing the "HDD RECOVERY" folder was accidentally damaged by me and now the system only view the C: partition !
I've tried to run the Toshiba Recovery Disc Creator but it shows the message: can't find the "hdd recovery" folder.
How can I reboot my laptop?

Message was edited by: melauf00

Answer:Satellite A300 - Recovery partition is lost

Thanks to a recovery file software now I' ve copied the "HDD REcovery" directory with all the other hidden files in D: in a folder in C:

Now...how I can burn a recovery cd/dvd with that folder ???

3 more replies
Relevance 66.42%

Have an Satellite Pro A300-28V laptop with Vista 32 Business. After a recovery from HDD Recovery partition I decided to use the function Complete PC system backup to make an image for future recovery with all my present settings. Too annoying to reset to factory default (Thunderbird 3.0 Mail, Open Office, and some other small applications previously running with no problems for years on another desktop computer).

The system needs 5 to 9 DVD's and it writes the first DVD. Takes roughly 30 minutes. Then, during verification of that disc it hangs. Verification bar stops at about 30% complete.
Anyone with that experience? Does not the Business "Complete PC image" work well on a OEM installation of Vista?
Or is it maybe the DVD driver who needs an update? I do not use a 3rd party burning software.

/Sweden

Answer:Satellite Pro A300-28V - Can't create own recovery disks

Hi

Which program you are using to create your own recovery disks? For example I mean Acronis, Norton Ghost, etc.

In your case I would try it with another burning program like CD Burner XP or Nero.
Furthermore you could try to remove the upper and lower filters in Windows registry, maybe it will work.

Last but not least on the Toshiba website you can check if there is a firmware update for your CD/DVD drive.

3 more replies
Relevance 66.42%

I'm upgrading the hard drive of my *toshiba a300-1mz*, but I'd be sure that I can use the *recovery disks* maked at the first boots for the s.o. (vista)

I expect your support...
thank you very much...

Answer:Satellite A300-1mz Can I use the recovery disks after a HDD upgrade?

Hi

Yes, you can do this!
If the HDD has been recognized by BIOS then you should boot from Toshiba recovery disk in order to reinstall the OS which was preinstalled by Toshiba.

Greets

5 more replies
Relevance 65.6%

I just installed the ultraiso program, when I open the toshiba recovery disc creator this message appear

An unexpected error occurred.
please quit this application and restart it.
(error code:0D00F6-26-00000015)

with an only ok option when I press it, it appears again ,when I press ok for the second time, it disappears and the program runs. What can I do to stop that?

note: I had the same problem with the poweriso program

my lap is a A300-211

Answer:Satellite A300-211 - Can't start recovery disk creator

Hi mate,

Can you please tell us what happens if you uninstall ultraiso program? To be honest ths program isn?t known to me, I never heard about this.
Then try it again please.

In worst case you have to start the HDD recovery option to reinstall Windows. Then you should be able to create the recovery media. For HDD recovery procedure I have founded this:
http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

3 more replies
Relevance 65.6%

Hello,
I have a Satellite A300, and I mistakenly deleted HDD Recovery folder.

I have recovery discs, but I'd like HDD Recovery folder to restore my system without using the discs.

Please, can you tell me how to re-create the folder HDD Recovery?

Thank you very much

Answer:HDD Recovery image deleted on Satellite A300 - How to restore from HDD

Hi,

Unfortunately, now it isn't impossible to recover it from hdd image, but with recovery disk only. You can only copy it from someone who has the same laptop with hdd recovery folder.

Message was edited by: Jeka-IL

7 more replies
Relevance 65.6%

I have read the threads that already exist, before anyone pounces with the obvious, however I don't see the answers to my specific questions, so I hope that someone can help.

Basically, my A300 was regularly overheating and turning off, and after a recent instance of this, I part disassembled it and cleaned the heatsink and surround thoroughly.

Unfortunately, on re-assembly, it became evident that Windows would not boot, presumably either due to some issue caused by the most recent power cut, or maybe even as part of my very careful disassembly??

Anyway, Vista will not boot, in any mode, either standard, in safe mode or in repair mode. As stadard, it blue screens with an error message UNMOUNTABLE_BOOT_VOLUME etc.

In repair mode, the windows logo and green bar comes up, but then it simply black screens and no more. The only slight variation I have had here is that sometimes a white cursor comes up, but still a black screen. I have left the machine for 30 minutes in case there was a simple delay, but no... nothing happens, it just hangs.

I have no recovery CD, because I didn't create one, however I have been able to access all the files through the Knoppix platform, and everything appears in order, so major HDD corruption seems unlikely.

I can see the folders for Toshiba HDD recover and also Windows RE, so my question to you people is this; Is there a way that I can use these files that are still in tact to recover Vista without purchasing a disk for 30 pounds... Read more

Answer:Satellite A300-1J1 - How to use HDD recovery files to install Vista again

Hey,

Unfortunately I think there is nothing what you can do because the files are useless if HDD recovery doesn?t work because you must be able to access the advanced boot menu of Windows.

I agree with you it?s not good that HDD recovery from Toshiba doesn?t work for you but you must also understand it?s your fault that you didn?t create the recovery disk as mentioned in user manual. ;)

So either you purchase a new recovery disk or you use a Microsoft Windows disk to reinstall Windows. All drivers and tools you can download on Toshiba page.

1 more replies
Relevance 65.6%

Hi, Hope someone can help.

Laptop stopped working - keeps trying to fix problem via windows on start-up but this just hangs for hours so I ordered a recovery disc to start a fresh as I believe the original problems were caused by a virus. I have no important data to keep so am OK with clearing everything and restarting. Today. I have just received my Product Recovery disc that I ordered from Toshiba. I follow the instructions; load disc, power on holding C. Then it just continues as if the Recovery CD wasnt in the drive. The CD drive doesnt spin. Its as if the laptop doesnt recognize the disc.

Any ideas?

Answer:Satellite Pro A300 - Recovery disk fails at start

Hello

Well, either i?s something wrong with recovery disk itself or the drive doesn?t detect the disk properly?

What happens if you access the BIOS boot menu (F12 key) and select CD/DVD drive as boot device?
If it doesn?t work try another bootable disk to make sure the drive is working properly.

7 more replies
Relevance 65.6%

Hi,

Tried making recovery disc for new Toshiba A300-29N using Sony DVD, always getting error. Toshiba service center confirmed that Sony DVD not compatible with this DVD drive.
Any one faced htis issue and any update. Tried with Imation DVD it worked fine
Regards
Samir

Answer:Cannot create recovery disc on my Satellite A300-29N using Sony DVD

I don't use Sony DVD media but TDK or Verbatim DVD-R. Every time I used it I was able to create recovery media. No problems at all.
I recommend you to do the same. Believe me it will work properly.

2 more replies
Relevance 65.6%

I recently purchased a Satellite Pro A300-13X notebook with Vista Business installed.
It came with two product recovery discs to install XP professional.

Since I decided just to use XP, I followed the procedure for product recovery and I am now running XP from the first disc. It seems to run properly.

I'm unable to install the second disc and wonder where it is for. It contains 7 application files 001-002-003-004 crc and tpa.

Does anyone know what to do with this disk?

Answer:Satellite Pro A300-13X: Question regarding the Product Recovery disks

Don't know what this disc contains or how to install it, but check if everything works and if all utilities and programs are installed, which you had under Windows Vista.

1 more replies
Relevance 65.6%

Hi guys I have a bit of an issue with my laptop (Satellite Pro A300-PSAG1E0). Well a few issues really


I had the laptop purchased as a gift second hand from eBay. The listing stated the laptop had the XP Downgrade media supplied on DVD which it wasn't and that I could create a copy of the recovery media using the built in software which it doesn't as it doesn't have the recovery creator software on it.

I belive that the laptop is running an illegal version of Windows as the product key sticker states it is meant to run Vista Home primium and it runs windows 7.

The seller has disappeared and he is not awnsering any of my calls. Im at my whits end with this as being on a low income means I can't really afford to buy recovery media or an offical Windows disk.

Any help on how I could get the recovery disks or any advice on how I can get a legal copy of Windows would be great. I have also reported it to microsoft as suspect software.

Once Again thanks

Chris Winter

Message was edited by: cheesewuz2004

Answer:Recovery media for Satellite Pro A300-PSAG1E0 required

Hi

You can order the Recovery disk for this notebook from here:
http://backupmedia.toshiba.eu/landing.aspx

But I don?t understand why you didn?t search in the forum for such questions.

Bye

2 more replies
Relevance 65.6%

Hello,

Hope you guys can help me.

I have a problem with my labtop and have formated the hard drive.. but in there was the HDDRecovery. Luckly (i guess..) i have save that same file in my other pc as a backup.

Now the problem is: even when i put the HDDRecovery in the exact same place where he was originally it doesn't work...

Theres any way to fix this?!

Thanks..

Answer:Satellite A300-1ID - deleted recovery HDD - backup does not work

hi,

You see, there was a hidden Toshiba recovery utility that you removed while formatting hdd. HDDRecovery folder you have doesn't help you.
You can order [Recovery disk|https://backupmedia.toshiba.eu/landing.aspx] for money from Toshiba or get Windows disk to install, all drivers are available on [Toshiba Driver Page|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

4 more replies
Relevance 65.6%

Hi everyone,

With my Toshiba nothing but problems. First I waited replacement screen for month cause there wasn?t any at warehouse. K, after that I downgraded to XP but driver are buggy, sound is poor, cant get USB2.0 to work, system is slower than Vista so I decided to return to Vista.

But of course, there is no DVD so I need to restore via HDD restore folder I have. But cool, Toshiba doesn't let me to download utility to create backup DVD. So what I can do? I have HDD Recovery folder, how to now create DVD without utility I was first given.

Ps.
You can say it?s not Toshiba fault; you did that bla bla. Of course, but first I waited replacement screen, I wasn?t given original Vista DVD, I cant even download utility from Toshiba. What sad piece of equipment. I have experience, my first installed OS was DOS and Win95, numerous OS installation after that but this that I can install back my OS in 2009 I wouldn't hope its gonna happen.

Any ideas you good ppl

Answer:Satellite A300-1lT - I want restore Vista with the recovery option

Sorry buddy, but in this case you need a new recovery disk. The HDD Recovery folder is not useful for you because you don&rsquo;t have Windows Vista yet and as you already know the Toshiba Recovery Disk Creator can&rsquo;t be downloaded.

So you must order a new disk from an authorized service provider or Toshiba directly:
[https://backupmedia.toshiba.eu/landing.aspx]

To be honest this is not a problem of Toshiba. If you start the notebook at first time you get the following message and this should not be ignored:

+Important INFORMATION+

+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+

+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
+hat you are able to restore your computer to the original factory installed state, even if your computer+
+gets seriously damaged+

6 more replies
Relevance 65.6%

HI

I bought a toshiba Satellite A300-15D

ftm the tsscorp drive that is installed in the device no longer works (does not detect any type of media what so ever). ) need to recover the laptop so I used a USB DVD drive to boot from the recovery disc but after the recovery console loads it says waiting for media in drive f: which is the tsscorp drive altough I used an external drive to load the disc.

What files would I need to modify to make it load from the external drive and if thats not the solution what should I do?

thanks in advance

Answer:Satellite A300 - How to use recovery disk with external DVD drive?

Hi buddy,

Unfortunately I think it?s not possible to use the recovery disk with external CD/DVD drive. So you have to place the internal one to use the recovery disk.
You can get a new drive from an authorized service provider.

But if the original Toshiba OS is installed, you can use the HDD recovery feature to reinstall Windows as well. Go in advanced boot menu (F8) and select ?Repair my computer? :)

8 more replies
Relevance 65.6%

hi i'm from greece.

I go to I do boot the recovery cd and she returns the following error:
+Could not get a language entry from ini file+
http://free4u.gr/pics/view-152_DSC01468.JPG


what to do.?

Answer:Re: Satellite A300-15A recovery issue: Could not get a language entry from ini

Hi

Did you try to repeat the recovery procedure?
Did you use the Toshiba recovery disk or did you start from the HDD recovery?

Check both procedures;
Firstly try the HDD recovery; press F8 then choose repair my computer and in new window follow with HDD recovery.

9 more replies
Relevance 65.6%

My Satellite Pro A300's Hard drive failed.It has now been replaced. I have ordered a recovery disk.
Will this enable me to reinstall the Windows Vista OS that came originally installed?

Also,I am getting this message"BOOTMGR MISSING".Will the recovery disk fix this issue too?
Many thanks in advance !

Answer:Re: Satellite Pro A300 - Will recovery disk reinstall Windows OS on new HDD

>I have ordered a recovery disk. Will this enable me to reinstall the Windows Vista OS that came originally installed?
Yes. Definitely.

Is new HDD recognized properly in BIOS settings?
If yes there should not be any problem.

By the way, A300 runs perfectly and much better with Win7 32bit.

4 more replies
Relevance 65.6%

Hi
I'm using Toshiba A300 laptop which has 2 HDDs (250GB each). The laptop has Windows Vista Home 32-bits installed but I want to change to Windows Vista 64-bits, which comes with the recovery disc, in order to use all 4GB RAM.

I backup all data and move them to the 2nd HDD (named D, the first one named C).

Therefore, I wonder if the recovery wizard will delete data from both hard drives or just the 1st one.

Thanks in advance
Kevin

Answer:Does recovery disc deletes data on 2nd HDD on Satellite A300?

Hi

Your notebook has been equipped with the HDD recovery option which allows you to create the own Toshiba recovery disk which would contains the preinstalled OS.
In your case the Vista 32bit.

And yes, the installation from the Recovery disk formats the whole HDD and deletes everything from the HDD, also from second partition.

Therefore create the Recovery disk before you would install or change anything on the HDD

2 more replies
Relevance 65.6%

Hi everybody!

Need some help with my Satellite A300. I lost the optical recovery disc I burned when the laptop was new. Now when I'm trying to burn a new recovery disc I can't find the Recovery Disc Creator - not on the desktop or in the Start meny. I still have the folder with all the recovery files left - a folder named HDDRecovery with size 4.5 GB. The problem is to find out how to burn the disc.

Can anyone help?


//iMate, Sweden

Answer:Satellite A300 - I can't find the recovery disk creator

Hi!

Have you reinstalled the notebook with your own Windows version?

The problem is that the recovery disk creator can?t be downloaded. So I think you must use the HDD recovery function to restore the factory settings. After this it?s maybe possible to burn the recovery disk again.

Bye

6 more replies
Relevance 65.6%

I am not really providing any solution, but faced similar problem with my Satellite A300-1EI laptop, purchased in Dubai, UAE. I tried to make recovery discs through Toshiba Recovery Disc Creator. However, everytime, I got an error message. I tried with Verbatim, Philips DVD-R and lost several DVDs. Meanwhile on some net surfing, I found out that Toshiba DVD writer is a bit sensitive and try using Verbatim brand DVD-R. I tried with Verbatim 2 days ago and at the last moment when I was about to dance with joy that first DVD is created, received an erro message as below

*"The following issue occured while recording data to the disc.*
*The current process will be stopped.*

*A power calibration area error occurred.*
*Please check if the dics is scratched or dirty.*
*If so, please try again with a new disc.*

*(Error Code: 0E01B5-26-00037304)"*

I really do not understand the message. Can you advise on how to create the recovery discs.

Regards,
Vijay

Answer:Re: Satellite A300 - Error while creating Recovery Disk

Hi

For me it looks like the used DVD disks are not fully supported by ODD.
It seems to be a compatibility issue.

I had such issue in the past but I could solve it using another DVD from another manufacturer.
I made a good experience with TDK DVD-R.
Using the ?R disk I was able to burn the disk but using the +R I received an error.

Cheers

5 more replies
Relevance 65.6%

Dear all,

I have Toshiba satellite A300, Model NO PSAGCE-00C006AR,

My operating system is windows Vista home premium.
Recently I was working on battery when my system shut itself down.

When I connected the charger and powered it on I found that screen shows message (Please wait ) for ever, and does not allow me to enter my password.
When I press the power button to turn off my PC and restart in safe mode I can enter my password and log on to my PC and, however when I log on the PC shows only black screen with indicator arrow and nothing more.
Start button does not respond, My Computer icon or any other icons are not shown on the desktop.

I did the following steps trying to repair my PC:-

1 I restarted my PC in safe mode with command prompt trying to run chkdsk /r, however I received error message that the disk is write protected and that I can scheduled it to run the next restart. I typed Y and restart but chkdsk did not run although I restarted it 2 times.
2 I restarted my PC and select advanced option then repair start up problem, then I received message that no problem was found.
3 I also tried Toshiba HDD recovery, but it could not find any recovery folder although there is about 1.5GB partition which has everything.
4 I tried windows complete PC restore but I received a message that ( a valid backup could not be found)
5 my PC came without recovery CD, so I borrowed one and restart my PC from the CD and selected repair ..etc, however I received ... Read more

Answer:How I can use the recovery folder located in HDD to repair Satellite A300

Hello

Of course I don't know what is wrong exactly but I am confusing about some other facts.
The fact is that Toshiba has created small reminder who informs user from the first day that Toshiba doesn?t deliver recovery DVD and it is recommended to create such DVD media immediately.

Question on you: have you created this recovery media?

The Toshiba recovery image has nothing to do with Vista WinRE 1,5 GB partition. WinRE partition is Vista feature. On new notebook models Toshiba recovery image is saved on second partition in ?HDDRecovery? folder. If you didn?t touch it and if you didn?t change anything with partitions you should be able to install Vista again using this recovery image.

After switching your notebook on press F8 and choose the first option ?Repair my computer? (if available). You can enter Vista System Recovery Options . The last option should be ?Toshiba Recovery?. If you didn?t change anything this option will be available.

Check it out!

1 more replies
Relevance 65.6%

Hi there.
I want to completely format my windows Vista on satellite A300-14S, but i don't have the cd with me.
How do i do it then? I want to bring it to factory default settings with everything gone.

Thank you.

Answer:How to format Satellite A300-14S without any Vista Recovery disk

Hi,

You can:

1 Order [Recovery disk|https://backupmedia.toshiba.eu/landing.aspx] for money
2 Get Windows copy disk to install all Toshiba drivers you can download from [Toshiba drivers|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
3 If you haven't removed hdd image, you can restore:

http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=58

Message was edited by: Jeka-??

2 more replies
Relevance 65.6%

Please I'm in desperate need of help,

My brother purchased new Toshiba A300-23E in Saudi Arabia. He has little knowledge of computers.
It was on the display threre.

He sent it to my father in Pakistan but soon noticed that it was full of virues and he fresh installed Windows xp SP2 after formating hard drive.

He gave that to me for fixing the problem. As it is designed for windows vista. I want to install windows vista but i havent got the recovery disk or any operating disk.

How am i suppose to install windows vista?
Somebody told me that i download vista trail version and enter the key which is on the back of my laptop.

Anybody having any idea. plz

Answer:How to install Vista on Satellite A300 without recovery disk?

> He sent it to my father in Pakistan but soon noticed that it was full of virues and he fresh installed Windows xp SP2 after formating hard drive.

This was a big mistake buddy?
The recovery disk was not shipped with the notebook because there was an preinstalled tool called Toshiba recovery disk creator which allows you to create an own recovery disk.
But this is not possible since the HDD has been formatted and all files have been deleted.

Now you would not be able to recover the unit even using the HDD recovery since the files are not available on HDD.

You need a recovery disk and you can order it from here:
https://backupmedia.toshiba.eu/landing.aspx

Greets

2 more replies
Relevance 65.6%

i bought my lap last april and after the crash of the system.
I used the recovery disc that i made from the image on the hard disc but it erased all the data in the two partitions.

My question: Is there a way to use the disc to format partition C only without erasing the data on the other partition?

Answer:Toshiba recovery disc usage for Satellite A300-211

Hi

No. the recovery disk will format the whole HDD and will erase everything from the HDD and partition.
The usage of the HDD recovery procedure will format only the C and will leave the data on the data partition.

Cheers

6 more replies
Relevance 65.6%

Dear brothers,

I lost the original recovery for my labtop Toshiba Satellite A300-146 (formated) and now the windows is not working.

I need the recovery CD if any body have it , please.

Answer:Satellite A300-146 - Original recovery (vista) is needed

Hi!

If you have lost the recovery disk you can order a new one from Toshiba directly:
https://backupmedia.toshiba.eu/landing.aspx

Bye

2 more replies
Relevance 65.6%

First of all, sorry about my english, but it's not my native language. About my technical problrm, short and simply:
I am useing Toshiba Sat A300-1GN with Vista 32-bit. I was trying to create a recovery disc by useing Toshiba Recovery Disc Creator.

I have inserted a totaly new DVD disc to DVD writer, and program was running very well but suddenly it just fail giving an error with something like that "There was an error in reinforcement calibration area. Error code: 0E01B5-26-00037304"

What's wrong?

What should I do to create tha disc? I can only add, that I have turned of my any-virus system just like it was said in Toshiba manual, but it didn't help.

Pleas, help.

Answer:Recovery Disc Creator Error - Satellite A300-1GN

What is the brand of DVD disc you are using?

Some cheap brands cause problems like this, to ensure you use good quality media such as TDK or Taiyo Yuden.

4 more replies
Relevance 65.6%

I have bought an A300 15b laptop, and it comes with win Vista preinstalled
I would like to change my OS to Win XP.
After searching this forum I noticed that I have to make a back up DVD of the original Toshiba recovery.

I found the recover folder on E:\HDDRECOVERY .
Now can anyone help with "HOW to make this DVD ".

I mean if I burn the folder as it is will it be bootable?
Do I have to use an image burning software , or drug&drop will work??

Are drivers available for Win XP?

Thank you in advance .

Answer:Satellite A300-15B: How to burn HDD recovery image & need Win XP drivers

Hi

You can burn and create the own Vista Recovery DVD using the Toshiba Recovery Disk Creator software.
It?s preinstalled on the notebook.

Please check the desktop shortcuts or the folder on the C:\ Program Files

The Toshiba Recovery Disk Creator will burn the Toshiba image.
I would also recommend using the DVD-R disks? some people got an error message during the burning due to not compatible DVD disk.

Cheers

9 more replies
Relevance 65.6%

Hello there!

I'm new in the new type of slipstreaming Windows. I was familiar with the old one with Norton ghost. It was easy for me, but I have a problem with the new one. I want to recover only C drive on my laptop with a different size than the factory size.

I want to delete the first partition and rearrange others because I want bigger partition for my data and small Partition for my system. Can I boot program with CD then insert Toshiba recovery disk and use the Vista image on recovery DVDs to recover only C drive?

Excuse me for my English. :-)

Answer:Can I recover only C Drive on Satellite A300 with recovery disk?

Hello

At first I must say that your English is very good and understandable. ;)

Back to recovery question. I agree with you. With old Norton ghost recovery image it was possible to install OS on one partition only. Unfortunately with recovery media that you can create with your Satellite A300 something like this is not possible.

3 more replies
Relevance 65.6%

Hi,

I had some trouble while trying to install MAC-OSX, to it, where the partition table get deleted, then I recover all the partition as is, but I can't boot anyways,
Then, I decide to temproraly install another copy of vista from Vista disk ( not the partition ), then configure my laptop to boot from the recovery partition and reinstall the right copy,
My problem is, every thing is there, the only problem is, I need to configure the system to boot from the recovery partition.

My device is:
Satellite, A300-148

Thanks in advcanced.
Ahmed.

Answer:How can I configure Satellite A300-148 boot from recovery partition?

I have bad news for you my Friend, but your NB is not compatible for the MAC- OSx system, this NB was designed only for windows vista, & if some day you can install the system, may be you have too many problem with the drivers & the performance of the machine, so I don't recomend do it.

You can check all the information about the NB in this page.
http://eu.computers.toshiba-europe.com/innovation/product/Satellite-A300-148/150445/DISC_MODEL/0/highlightOption/137940/#0

I hope this help you.
/*HEAVY METALL*\

5 more replies
Relevance 65.6%

The story so far...

Laptop failed (A300-1MC)

No recovery disk available
Replaced HDD
Installed Vista using borrowed recovery disk from earlier Toshiba Satellite model
Installed missing drivers => working system without valid product key
Connected old HDD using external usb enclosure
Launched original TRORDCLauncher on old drive - no errors

So now I apparently have 2 recovery DVDs.

Question: Will these DVD's restore to original system ?

The earlier Satellite had no TRORDCLauncher and came included with recovery disks

I am aware of correct procedure => order recovery disks from https://backupmedia.toshiba.eu

Answer:Re: Satellite A300-1MC: Would recovery restore to original system ?

> So now I apparently have 2 recovery DVDs.

Recovery disk would always set the notebook back to the same state like at the first day of purchase?

6 more replies
Relevance 65.6%

Hi guys.

I have a question.
I have a Toshiba Satellite A300 which came with Windows Vista.
I have the recovery partition normally with the utility normally preinstalled.
After I formatted the system partition, I installed a clean and fresh copy of Windows 7.

My question is as follows.
Since the recovery partition does not get messed with, isn't there a way to install the hdd recovery utility back in Windows recovery options from F8 before boot?

Please don't tell me that I need to have the recovery disk.
I already do, I just want to find a solution because it shouldn't be that hard for someone who accidentaly formatted the system partition and hadn't created the discs, but has the recovery partition. My guess is that there needs to be some modification to the Windows Recovery Enviroment files that is initiated when you use the Repair My Computer option at boot because normally the HDD recovery utility appears as one of its tools-options.

The problem is that I don't where these files are, (maybe C:\boot ?)
Right now I am tryiing to see if an upgrade install of windows 7 on windows vista will keep the options of hdd recovery so maybe I will find what is needed.

Any suggestions are welcome!
Thank you for your time.

Answer:Satellite A300 - How to start HDD recovery after clean OS insatallation

Ok, just one more hint, I found what's happening with the recovery enviroment and what needs to be replaced in order for it to include more tools...
This article was really helpful:
http://www.techplat.com/2010/02/12/how-to-replace-default-windows-7-recovery-environment-in-diagnostic-and-recovery-toolset/

Also I found some microsoft guides on editing the windows 7 recovery environment.
http://technet.microsoft.com/en-us/library/dd744576%28WS.10%29.aspx
http://technet.microsoft.com/en-us/library/dd744525%28WS.10%29.aspx

So I am continuing and I believe I am close....

3 more replies
Relevance 65.6%

Hi there

I bought myself a A300-1FC at the german Saturn sotres chain.
It is a nice notebook so far the only thing that annoys me is the pile of preinstalled software which is of no use for me at all.

Is there any way of recovering the plain windows only and then installing all required drivers
and service packs manually. Or at least a way that leaves all the useless software aside?

If not I am quite keen on downgrading - I don't like vista particulary much anyway but combined
with the annoyment of the preinstalled software it is certainly enough reason do get rid of it.

Any help?

Cheers

aurtobi

Answer:Satellite A300-1FC - Recovery of Vista without preinstalled software

Hello

As you can see Toshiba, like all other notebook manufacturers, offers Recovery image. This recovery image contains all necessary drivers, Toshiba designed tools and utilities and also some additional software.

You must understand that maybe 10% people have good PC knowledge and they are able to configure notebook alone. I am happy that you are one of them but you must know that recovery image is designed for easy and not complicated OS installation. There is no possibility to install ?clean? Vista using this recovery media.

Other way nobody force you to use all of them. All useless stuff you can remove from the system. Believe me I do the same thing. You can optimize OS on your needs.

Bye and good luck!

1 more replies
Relevance 65.6%

Hi all

I have a customers Sat M40-197 which was badly messed up with malware so I did a full recovery using the supplied disc which has the product number PMR400490EN0. After restart the system just hangs in normal mode, and on safe mode I notice that the last line logged is Mup.sys but even in that mode the system still doesn't start. I've tried using Ghost in advanced mode not resizing the partition but no matter what I try I can't get it to start.

Before I take what I think is my only option of using a standard OEM XP Home disc and installing using the supplied product key I was wondering if anyone had any solutions to this?

Thanks in advance.

Answer:Satellite M40: Recovery procedure hangs on restart after using recovery CD

Hi,

sounds first like some Recovery CD error. I mean it?s possible that the CD is physically damaged or whatever and then some data may be corrupted.

If not then I would assume the following reasons:

- HDD is not properly formatted -> reformat it completely and create one BIG partition
- HDD is faulty -> check the HDD with some special HDD tool from the manufacturer (in most cases you can download it from the manufacturers website)
You can also download "UBCD4WIN" (just google for it) and check your HDD with the integrated tools
- The memory could be faulty -> use the "UBCD4WIN" and check the memory with "PI" or "SuperPI"

Thats it..
;)

Greets

1 more replies
Relevance 64.78%

Hi my name is Kanwar. I live in Toronto, Ca.

I purchased A300 toshiba laptop 3 month back, and made recovery DVDs the same time :-)
But i faced some problem and did tried to do recovery and i erased all data after taking backup, but while using my 1st DVD i faced a problem that PREINST2.SWM file is missing after about 12 minutes.

My DVD is brand new, without any scratches.
Also while creating the recovery discs, there was no issue, it got 100% successful.

What can i do now?
I need the laptop in my studies very urgent and its .....
I left message on 1-800- Toshiba also, but got no response :-(

Help me
u may reply here and forward on [email protected]
thnx

Answer:PREINST2.SWM file is missing while recovery procedure on Satellite A300

Hi

Did you try to use the HDD recovery procedure (if possible)???

Press F8, while notebook powering up. Choose repair my computer.
Then a new window will open. Then you could start the recovery from HDD.
But this would be possible if the HDD recovery folder has not been changed.

If HDD recovery is not possible, I recommend formatting the HDD using an Windows XP CD.
Then try to boot from the Toshiba Recovery DVD again.

Check it out

2 more replies
Relevance 64.78%

I have a Satellite A300 and have been advised to "recover' my computer.

I haven't made a recovery disk yet and was wondering if the files (ie. music) would be included in the recovery and if they weren't would they be deleted. Also i was wondering about the programs (ie. iTunes), would it be recovered because I am making the recovery disk with it installed.

It is just a problem because I have 250GB of music and I would take a while to move to my portable hard drive and it would really screw up iTunes.

Cheers, Levi

Answer:Re: Satellite A300 - Does the recovery disk include music and programs?

Hi

It?s a good idea that you think about creating a Toshiba recovery disk because you will need if Vista doesn?t start. This could happen?

Anyway, the Toshiba recovery disk you can create with the Toshiba recovery disk creator. What does the program do?
The recovery disk creator burn a bootable disk with an image of the ?factory settings?. That means all files that you have stored on the computer or programs that you installed are not on the recovery disk. The image that I said is stored on the second partition of your notebook in the folder ?HDDrecovery?.

So before you run the recovery disk you should backup all files on a DVD or external HDD. The complete HDD will be formatted with the recovery disk.

By the way, do you know the HDD recovery function? It?s the same as the recovery disk but it formats only the first partition. You can start this Toshiba feature if you go in the advanced boot menu, select ?repair my computer? and then choose the Toshiba recovery option. Then you get the factory settings back.

But the files and programs that you have installed don?t affect this image. So don?t be worry about this and backup your files from time to time.

I hope you can understand it now and if you have more questions, please let us know!

Bye

3 more replies
Relevance 64.78%

Hello,

I have deleted the HDDrecovery partition by accident but i have all the files in the partition backed up.

Is it possible to create the partition again?
Or make a recovery disc from the files? -
I have the recovery-disc-creator program if its possible to still use?

Regards
Shaun
Satellite Pro A300

Answer:Satellite Pro A300 - deleted HDD recovery partition but have ghost backup

> Is it possible to create the partition again?
From my knowledge it?s not possible to create it again without a usage of Toshiba recovery disk? As far as I know this partitions contains also some marks which are necessary to boot from this partition.

> Or make a recovery disc from the files? -
I have the recovery-disc-creator program if its possible to still use?
Usually this Toshiba Recovery Disk Creator tool needs the HDD partition in order to create the Recovery Disk. But I doubt it will functions if you have already deleted this partition.
But nevertheless you could check it.
Create the partition (Vista disk management), copy this files on this partition and check if the this Toshiba Recovery Disk Creator tool would find this.

If not then I don?t believe that you could create such HDD partition?

In such case you will have to buy a Toshiba Recovery disk

2 more replies