Computer Support Forum

T450s Thinkpad - ERROR 2101: Detection error on SSD1 (M.2)

Question: T450s Thinkpad - ERROR 2101: Detection error on SSD1 (M.2)

Model: T450sEquiped as:Intel i54+4GB RAM256GB SSD (M.2) Configured as boot disk running Win 7 x64500GB HDD as additional storage Issue:Seemingly at random, approx once every one to two weeks while PC is on and at the desktop but not actively being used (meaning no user is sitting in front of it performing tasks) it will error and crash. The error is a black screen with the following error: 2101: Detection error on SSD1 (M.2) Press Esc to continue. According to the user Esc does nothing and the only escape is to long press the physical power button until a power down occurs. On reboot the system comes up without issue. No user has actually seen the crash take place. MY QUESTION(S):1st. Is this most likely an issue with the T450s not being able to reliably boot from the m.2 slot or is this more likely an issue with the SSD installed in the m.2 slot?2nd. Is this something altogether different? Any (knowledgeable) advice or info appreciated.

Relevance 100%
Preferred Solution: T450s Thinkpad - ERROR 2101: Detection error on SSD1 (M.2)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: T450s Thinkpad - ERROR 2101: Detection error on SSD1 (M.2)

It is hard to diagnose without seeing it, but my experience has been that the Gen4 and later CPUs (like yours) support a very low power state that is incompatible with some devices. (that would make it a problem with the card) Make sure you have the latest BIOS and power manager software installed. Look in the device manager and find the M.2 SSD. There should be a power management tab. Turn off the option to allow the system shut the device off to save energy.

4 more replies
Relevance 132.53%

Hi Team.So my thinkpad t450s just crashed in the midst of playing some music.Then it rebooted and said 2101: Detection error on SSD1 (M.2)I cant come back to my OS because it is installed on the said SSD.Already read the manual and opened the thing up and cleaned and reseated the SSD. But does not help.Guess the SSD is broken? OR does anyone have any other ideas??Thanks a lot!

More replies
Relevance 91.93%

Hi, I bought my P50 like 4 months back and suddenly it has started to throw this error when the machine is starting up."2100: Detection error on SSD1 (M.2)". I have run the tests in BIOS mode and all the tests got passed. I have faced the error 2 times now and after keeping the machine down for few minutes and switching back on resolved the issue. But I can't be sure it will solve the issue next time.Just bit of a background to the error. I have started my machine this morning, and from Windows login screen machine sudddenly restarted saying "DPC_WATCHDOG_VIOLATION". And on the restart I got the error. I do have a feeling that this not related to actual hardware, but firmware etc.  Any ideas would be highly appreciated. Thanks.Jaliya

More replies
Relevance 76.56%

Whenever I try shutting down my computer normally, it is extremely slow and displays the message: Error 2101  Detection error on HDD2 (mini sata). This causes some problems on my computer. My laptop is a Thinkpad T530 with Intel Core i7, 500 GB HDD, and 8 GB RAM. Any suggestions?

Answer:Error 2101 Detection error on HDD2 (mini sata) in T530

do you have mSATA installed on the system???

6 more replies
Relevance 76.56%

running 1.40 biosthink I have WWAN model as there is a SIM slot and there are a red and blue wires ready for the 3G wireless card.all lenovo drivers etc checked to latest versionsInstalled 128GB Kingspan which failed to do anything and caused the whole system to be unbootable. Turns out the ssd was dead as it did not work in working usb enclosure.swapped in 64GB msata minipci from my old eee901 it is the correct size for the lenovo slot - it wasn't for the 901 and I am now getting 2101 Detection Error on hdd2 on boot up.I have tried reseating the card, cleaning the pins, reseating, booting to Hirens, Slacko, Gparted, Fedora and not been able to see it as the error code is pre OS... Anything I can do? - roll back drivers, roll back bios, buy specific brand msata any suggestions welcome :-)

Answer:Error 2101 Detection error on HDD2 (mini sata) X220

HiIt seems newer drive is needed or its firmware. Chek out SSD manufacturer site for fw update.Since x220 BIOS 1.16 or something like this one, msata SSD error detection has disappeared. Except of rare cases with some Crucial (or Corsair, didn't remember) and Samsung drives. Also do not use OCZ drives.

7 more replies
Relevance 76.27%

I got my 430s, and it's with a 16Gb mSATA SSD cache inside.Now everytime when I open my PC, it shows Error 2101 Detection error on HDD2 (mini sata) and I need to press ESC to continue.Is there any software or driver's problem, or it just phsically got wrong?Any techician could help to solve, or I have to do it my own?










Solved!
Go to Solution.

Answer:Error 2101 Detection error on HDD2 (mini sata) in...

Have you ensured you are running the latest BIOS?  What version BIOS do you currently have? After pressing escape does the computer boot normally?

9 more replies
Relevance 76.27%

Hi guys, I fitted a 64GB Sandisk P4 mSATA SSD today in my week old X220 4287CTO & get this error, I thought it maybe the bios causing the problem as reported in the forum but the threads I have read seem to be the SSD not being recognized at all. Any help would be appreciated. Product SKU: 4287CTOProduct Name: ThinkPad X220 - 3 Yr Depot Topseller Warranty Intel Core i5-2410M Processor (2.3GHz, 3MB L3, 1333MHz FSB)7 Home Premium 64 English12.5" Premium HD (1366x768) LED Backlit Display, Mobile Broadband Ready, 2x2 Antenna2 GB DDR31333MHz (1 DIMM)Keyboard UKFingerprint Reader720p HD Camera20 GB Hard Disk Drive, 7200rpmNo Micro Solid State DriveThinkPad Battery 29+ (6 cell)Country Pack United Kingdom with Line cord & 65W AC adapterBluetooth 3.0Intel Centrino Advanced-N 6205 (2x2 AGN)Integrated Mobile Broadband - Upgradable

Answer:Error 2101 Detection error on HDD2 (mini sata)

Yeah I am getting the exact same error 2101. Also X220 but 4286-CTO which I brought from US. The BIOS version is 1.17(highest I can find now).Wonder if it is a compatibillity problem or simply the bios is not programmed rightly.

7 more replies
Relevance 75.98%

Hi all. I have a 1 month old t450s bought directly from lenovo. Standard HDD and ram, decided to go with the HD+ IPS monitor (very good) and opted out on the 16gb ssd. I've bought a crucial balistic 8gb stick and a Transcend MTS400 128gb ssd m.2. I've installed everything and it was all working well with the eventual 2101 error on boot after resuming from sleep. Since my OS is installed on the SSD I've disabled the sleep mode, because boot time is less than 5 seconds. Anyway, a week ago I've started experiencing random freezes doing regular tasks (browsing, documents...). Yesterday the computer was frozen, I've power cycled it and I was greeted with a 0xc0000225 blue screen (something on the lines of file system not found).I've tried everything, system repair, changing the UEFI settings, reseating the ssd, running the Lenovo bios diagnostics (all green). Nothing works. Any ideas? Thanks!

More replies
Relevance 105.37%

I get the following message when I turn on the laptop: 2101: Detection error on SSD (M.2) The laptop (T560) is new and was only received on the 13 May 2016.  When it occurs I run thediagnostics and can usually get the machine to boot up. However, the error then reoccurs at a later stage, usually if the machine has been idle for a while.  I have lodged a service call with Lenovo but thought I would share my experience here and see if anyone else has the same issue? 

More replies
Relevance 104.14%

Hi AllHave installed Windows 10 on ADATA SP600 120Go SSD M.22 on my T440. All was ok for month (10 month exactly).Recently i updated the bios to the latest one : 2.44 (I don't know which version I had before :-( ).And know the laptop reboot regulary with the error message : 2101 detection error on SSD M.2 Any suggestion are welcome.My first Idea is to downgrade the bios but offically it is not possible. I did not find the way to do.Thanks for your helpChristophe 

More replies
Relevance 102.91%

Hi, I just received my T430 about 4 days ago and it's working perfectly until I was trying to install important windows updates. As I was rebooting my laptop after the installation (which fails everytime I don't know why), my computer gave me a loud beep and a error code of 2101 detection error. So I searched this forum and found this solution http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT074404 from another post that had the same problem as mine.As i was following the steps,( i did cmd, uninstalled express cache, and did disk managment) but as i went on my disk management i could not find my mSATA. I have a 16 gb mSATA and it was working perfectly fine before. I've noticed on my reboot that it took longer to load and the error message would then come up.So my problem is that I cannot view my mSATA disk on my disk managementThankyou!

Answer:2101 Detection Error: Cannot view my mSATA

The Error 2101: Detection error on HDDx miniSata is a BIOS error. This has nothing to do with the operating system you have installed or any drivers. During the POST, the system does not see the miniSata drive. I (like some others) received my new T530 recently, setup it all up and then a few hours later received this error. The solution is simple. You must open up your ThinkPad. Remove the two keyboard screws and remove the keyboard and RE-SEAT the miniSata drive. There is 1 screw holding the board down. Remove it, re-insert it in. Screw everything back up and voila, no more issue. Go to the Lenovo / ThinkPad Guides and Manuals page for your device (http://support.lenovo.com/en_US/guides-and-manuals/default.page?) and download the Hardware Maintenance Manual for your ThinkPad. There are clear instructions (for those less inclined) on how to remove the keyboard. You do NOT need to disconnect the ribbon cable. Simple / carefully slide the keyboard forward and the miniSata drive will be visible and accessible. You can also use the ExpressCache program to get stats on the miniSata drive and see how it is working. Open a Command Prompt (in Administrator Mode) and issue the command: eccmd -info   -   Display ExpressCache activity informatio eccmd -?   -  Will show you all options eccmd -format   - Will reformat and clear the cache drive. Hopefully, this will help out those out there with this issue. Ju... Read more

2 more replies
Relevance 100.86%

I got this error out of the blue the other day on startup, and now I get it every time I restart.  I have tried a number of solutions that I found in these forums (which I'll outline below) but it seems like my system just can't find the drive anymore.  Here's what I've done: 1. ran the ExpressCache program via Command Prompt (eccmd.exe -info) and got this error:  "**ERROR** ECCmd Request device is not available"2. unistalled the ExpressCache software, shut down, pulled the battery opened up the memory module slot cover, removed the mSATA drive and then re mounted it.3.  reinstalled ExpressCache4.  I'm trying to reformat the drive, but I am receiving similar errors     a.  When I try to format the drive (eccmd.exe -format) I get the following error:  HFS Volume is not mounted  **ERROR**  ECCmd Requested device is not available     b.  When I try to create a partition (eccmd.exe -partition) I get the following error:  0x10df (4319).  I looked this up and maybe there are system files missing? I have also tried this but it then says "There is NO mSATA detected, please check mSATA attached" http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT073737 If anyone has any advice, please let me know.

Answer:2101 detection on HDD2 (mini sata) error on my T430

Hello and welcome,
 
None of the symptoms you describe sound to me like software issues. There is something wrong with the mSATA SSD, or the controller that accesses it - or it needs to be re-inserted in its socket.
 
Is this machine under warranty?  I'd suggest calling support and running this by them.  They may suggest re-seating the device in its socket, or may offer replacement or some other option.  I don't speak for Lenovo, just offering my personal suggestion.
 
Z.

3 more replies
Relevance 100.86%

I started getting this error everytime I reboot my machine. If I press ESC boot continues fine. Whats strange is I dont eve have a HDD2 Mini Sata, and if I do I have never known about it and I cant set it in device manager, etc. How do I get the machine from stopping to try and detect this? Very annoying. 













Solved!

Go to Solution.

Answer:T530, 2101: Detection error on HDD2 (Mini Sata)

Disconnect AC power, remove battery pack, wait for a while, then put everything back and try if 2101 disappears.

5 more replies
Relevance 100.86%

I recently bought an OCZ Nocti mSATA SSD for my w520 and after I installed win7 on it, the system started showing 2101etection Error on HDD2(mini SATA)...... does anyone know how to fix it?? thank you!

Answer:How to deal with 2101: detection error on HDD2(mini SATA)

I had this problem with w510 and corsair force SSD. but after update a laptop BIOS and SSD firmware I have this problem very very rare (may be one time per have a year)Stas

2 more replies
Relevance 100.86%

I've read a lot about the 2101 Detection Error of mSATA issue on x220 with mSATA other than intel 310 installed. Last year I purchased a W520 and an Intel 310 mSATA. They worked fine together untill yesterday. I have windows 7 enterprice 64bit installed on the mSATA and linux installed on an SSD. I have a 500GB HDD installed in the ultrabay, as a shared data volume shared by Windows and Linux. Everytime I try to boot windows, it fails. And during the next reboot, the "2101 Detection Error" shows up. To try to solve this problem I have the mSATA reseated and the 2101 error disappears, until I try to boot windows again. Everything works fine IF I ONLY BOOT LINUX. 2101 Detection Error shows up everytime I TRY TO BOOT WINDOWS UP. I've updated the UEFI BIOS to the latest version which is 1.36 but the problem is still there. I've used the lenovo diagnosis tool (bootable usb) to run a set of quick tests and no error detected (except for drive self test either not supported or not passed). Please find the configuration of my laptop below:======================================W520-4270CTOCPU:                                 I7 2720 QMMEMORY:                        16GB (4GB SAMSUNG X 4)VIDEO:                   ... Read more

Answer:2101 Detection Error with mSATA on W520 with Intel 310 installed

Is the mSata card first in the boot order?

9 more replies
Relevance 100.86%

I ordered the mSata mini 128GB card to go into the half size slot under thge keyboard.  However when I boot I get:  "2101: Detection error on HDD2 (Mini SATA)".  I thought that a half size drive would work, as it does it my Lenovo W520.  However it appears the BIOS does not recognize it.  It does however recognize it in my W520. Has anyone else successfully added a second drive internally to the X1 Carbon Touch? http://www.mfactors.com/msata-mini-half-size-sataiii-ssd-128gb-64gb/  













Solved!

Go to Solution.

Answer:X1 Carbon - "2101: Detection error on HDD2 (Mini SATA)"

Hello and welcome,
 
No personal experience here, but I do see this note on the page you linked:
 
Note: Only works with systems with mSATA standard connector. NOT compatible with Mini PCIe slot for WWAN/wireless cards
 
The way I read the Hardware Maintenance Manual  that slot is WWAN only, not a WWAN/mSATA combo slot.  Could be wrong.
 
Z.

2 more replies
Relevance 99.63%

Hello Lenovo Community, My laptop is as follows:Lenovo T430sMachine Type: 2352-CTOWindows 7 Home Premium 64-Bit Please let me know if there is any other necessary information. Problem:During startup, I receive the above "2101 Detection error on HDD2 (Mini SATA)" error. It is important to note that this problem is intermittent. I have a 16gb mSATA installed on my computer. I've attempted to do the following to fix this error: 1. Run several virus scans - no viruses apparent2. Earlier I ran "eccmd -info" and the command prompt indicated that everything was working correctly.3. I reseated the mSATA card last night.4. Today, when I run the same command as an administrator: "eccmd -info" ------------------------------------------------------------------------------------------------------------------------------------------------------------C:\Windows\system32>eccmd -ifnoExpressCache Command Version 1.0.86.0Copyright? 2010-2011 Diskeeper Corporation.Date Time: 7/8/2014 17:33:18:579 (STEVEN-THINK #0)HFS Volume is not mounted.USAGE:ECCmd [-NOLOGO][-INFO | -PARTITION | -EXCLUDE | -CLEAREXCLUSIONS | -FORMAT | -PRELOAD]-NOLOGO - No copyright message will be displayed.-INFO - Display ExpressCache activity information.-PARTITION - Create an ExpressCache partition.[DriveId] - Optional drive ID[PartSize] - Optional partition size in MB-EXCLUDE - Exclude a drive from being cached.DriveLetter - Drive letter-CLEAREXCLUSIONS - Clear all cache exclusions.-FORMAT - ... Read more

More replies
Relevance 94.71%

Hi.  I have a T430s (original owner). At boot-up, I receive a "2101: Detection error on HDD2 (mini sata)", BUT I don't use a Mini SATA!! Windows 10; All drivers current via Lenovo system update (incl. bios 2.69).I have a Crucial SSD drive; I have verified Crucial SSD has latest firmware.I do not have (and have not had) a Mini SATA card installed - this is why the error is so weird to me.I DID recently change the Wifi Switch and cable (which is when the error started showing)The wires that would feed the Mini SSD are still covered with tape from the factory (I forget the colors)I have removed the battery, internal battery and power (and rebooted).  I have reseated the SSD and the DVD drive (and rebooted).I do not have Express software installed; the software that would control the Mini SATA drive (I can't see any "express" software in Add / Remove programs) Can you help me with this annoying mystery?

More replies
Relevance 93.07%

Hi there, After about month of use I suddenly got an error: "2101: Drive detection error on hdd2 (mini sata)". Simply while browsing the internet system hung up and after reboot the error appeared.I've read that people here had same error just after mounting their SSD's - mine worked fine for few weeks.The problem appeared short time after auto-updating BIOS but not just after flash. 2 or 3 restarts gone smoothly.Strange is that now my BIOS version is still 1.16 when on the web since last Wednesday hangs ver. 1.17 - the update went on Saturday.Any ideas how to avoid sending anything (Laptop and SSD) to RMA? I have already RMA ticket from OCZ but want to save some time and don't want to lose the data.Besides I'm not sure if it isn't issue of the new BIOS from Lenovo. Thanks in advance for any help.Gootchio 





--------------------ThinkPad T430 (2344-52G)i5-3210M, NVS5400M, 16GB Corsair Vengeance, 120GB OCZ Nocti SSD + 500GB HDD, Win7 Pro









Solved!

Go to Solution.

Answer:2101 Error: ThinkPad T430 and OCZ Nocti 120GB

Hello gootchio,
Welcome to the Lenovo Forums.
 
You should try and reseat the drive the computer is not detecting.  This should reset the code and hopefully correct the problem.





Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve the problem you encountered? Click Solution Provided to let us know!What we Do in Life will Echo through Eternity. -Maximus Aurelius

7 more replies
Relevance 91.02%

Anyone experiencing this? I see a lot of older posts referring to this error. This is on a brand new machine.  Wondering if this is something that needs to be repaired or just a bug which could be fixed by an upcoming Bios update.  Happens infrequently but sometimes I will come back to the laptop after walking away, and it will be at this error. 

Answer:T450s: 2100: Detection error on HDD0 (Main HDD)

Do you have an SSD?

6 more replies
Relevance 91.02%

Hi,I got T450s with 500GB HDD which I replaced with 500GB SSD Crucial MX200.After installing Windows 8.1 Pro, turning on bitlocker and restarting machine, I saw black screen with white text: 2100: Detection error on HDD0 (Main HDD) usually if I power off laptop and turn it on again, problem gets solved and I can start Windows, but then after restarting computer again the error is usually there again... I've noticed that if I turn off the bitlocker, the problem doesn't appear (at least I wasn't able to encounter it without bitlocker). I saw threads about similar problems with this and other thinkpad models as well as crucial and samsung SSDs, but none was actually reporting that it may be connected with bitlocker functionality... (I can't be 100% sure it is, but so far it looks like it). any idea how I can fix it so that it works also when bitlocker is enabled? Thanks!

Answer:T450s: 2100: Detection error on HDD0 (Main HDD)

I have exactly the same problem too with a T550 and a 1TB Crucial MX200. Did you ever find a solution? I'm tempted to return the MX200 and try a Samsung 850 EVO instead.

1 more replies
Relevance 87.74%

Hello! First post on this forum but been browsing for some time. My machine: ThinkPad S430, type-model: 3364-5HG, Win 7 x64, 500 GB HGST HDD. My problem is notably similiar to this one: https://support.lenovo.com/us/en/documents/ht082504.The problem occurs on very irregular basis, at times a couple of times a day but other times it goes weeks between the interrupts. It starts with some sort of short mechanical sound from the HDD, similar to the one when you turn the laptop of by pressing and holding the power button (only do this if I absolutely have to, it feels like choking someone with a pillow). After the sound, the screen freezes for a couple of seconds before the short bluescreen mentioned in the link occurs. The rest is as follows by the link above. Basically the only difference is the HDD brand (HGST in my S430 and Samsung in the link). After reboot (with power button during the automated reboot after bluescreen when the error code occurs), the laptop works fine.  It's getting quite annoying when this happens and also the suspension of not knowing when it will happen next is not good for my heart. What to do? Thanks in advance! Regards,Nicholas

More replies
Relevance 84.05%

I got frequent BSOD a few months ago, but fixed it by updating some of my drivers. I got another BSOD today with the error IRQL_NOT_LESS_OR_EQUAL while using google chrome. I have attached the DM Log files.

DESKTOP-92VPPHA-Thu_03_10_2016_131322_22.zip

Any help would be appreciated!

Answer:ThinkPad T450s error: irql_not_less_or_equal

The driver for Intel(R) Dual Band Wireless-AC 7265 caused that BSOD.

Search for any possible updates here: Drivers Software
_________________________________________________________________

Code:
BugCheck D1, {99, 2, 0, fffff80159434e74}

*** WARNING: Unable to verify timestamp for Netwtw02.sys
*** ERROR: Module load completed but symbols could not be loaded for Netwtw02.sys
Probably caused by : Netwtw02.sys ( Netwtw02+34e74 )

Followup: MachineOwner
---------

Code:
Image name: Netwtw02.sys
Browse all global symbols functions data
Timestamp: Tue Jan 05 14:58:43 2016 (568B8CCB)

0 more replies
Relevance 84.05%

I got frequent BSOD a few months ago, but fixed it by updating some of my drivers. I got another BSOD today with the error IRQL_NOT_LESS_OR_EQUAL while using google chrome. I have attached the DM Log files.

Attachment 68701

Any help would be appreciated!

Answer:ThinkPad T450s error: irql_not_less_or_equal

The driver for Intel(R) Dual Band Wireless-AC 7265 caused that BSOD.

Search for any possible updates here: Drivers Software
_________________________________________________________________

Code:
BugCheck D1, {99, 2, 0, fffff80159434e74}

*** WARNING: Unable to verify timestamp for Netwtw02.sys
*** ERROR: Module load completed but symbols could not be loaded for Netwtw02.sys
Probably caused by : Netwtw02.sys ( Netwtw02+34e74 )

Followup: MachineOwner
---------


Code:
Image name: Netwtw02.sys
Browse all global symbols functions data
Timestamp: Tue Jan 05 14:58:43 2016 (568B8CCB)

1 more replies
Relevance 81.59%

Recently after getting a fresh install of windows 10 on my ThinkPad T450s, I occasionally get BSOD while in the middle of doing various tasks (word processing, web browsing, onenote, etc.). Because of the fresh install, I downloaded many applications so I don't know what's causing the issue. The error code is 0xdead039e, but I couldn't find any information about it online. Any help would be appreciated.

Attachment 59827

Model: ThinkPad T450s
CPU: Intel(R) Core(TM) i5-5200U CPU @ 2.20Ghz
RAM: 8.00 GB
Hard Drive: 500 GB HDD
Graphics: Intel HD Graphics 5500

Answer:BOSD Error Code 0xdead039e on Lenovo ThinkPad T450s

All 4 dumpfiles are :


Code:
*** WARNING: Unable to verify timestamp for Netwtw02.sys
*** ERROR: Module load completed but symbols could not be loaded for Netwtw02.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck DEAD039E, {121e0009, 12507ba, 11af0000, 0}
Probably caused by : Netwtw02.sys ( Netwtw02+7f2d5 )
Followup: MachineOwner
---------
1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Unknown bugcheck code (dead039e)
Unknown bugcheck description
Arguments:
Arg1: 00000000121e0009
Arg2: 00000000012507ba
Arg3: 0000000011af0000
Arg4: 0000000000000000
Debugging Details:
------------------

CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0xDEAD039E
PROCESS_NAME: Sy... Read more

3 more replies
Relevance 81.59%

Recently after getting a fresh install of windows 10 on my ThinkPad T450s, I occasionally get BSOD while in the middle of doing various tasks (word processing, web browsing, onenote, etc.). Because of the fresh install, I downloaded many applications so I don't know what's causing the issue. The error code is 0xdead039e, but I couldn't find any information about it online. Any help would be appreciated.

DESKTOP-92VPPHA-Wed_01_20_2016_135015_19.zip

Model: ThinkPad T450s
CPU: Intel(R) Core(TM) i5-5200U CPU @ 2.20Ghz
RAM: 8.00 GB
Hard Drive: 500 GB HDD
Graphics: Intel HD Graphics 5500

Answer:BOSD Error Code 0xdead039e on Lenovo ThinkPad T450s

All 4 dumpfiles are :


Code:
*** WARNING: Unable to verify timestamp for Netwtw02.sys
*** ERROR: Module load completed but symbols could not be loaded for Netwtw02.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck DEAD039E, {121e0009, 12507ba, 11af0000, 0}
Probably caused by : Netwtw02.sys ( Netwtw02+7f2d5 )
Followup: MachineOwner
---------
1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Unknown bugcheck code (dead039e)
Unknown bugcheck description
Arguments:
Arg1: 00000000121e0009
Arg2: 00000000012507ba
Arg3: 0000000011af0000
Arg4: 0000000000000000
Debugging Details:
------------------

CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0xDEAD039E
PROCESS_NAME: Sy... Read more

0 more replies
Relevance 79.54%

Recently I was in the middle of using my laptop when it bluescreened and crashed. Now I'm not proud of this, but for some reason this is not an uncommon sight; I bought this off of eBay a couple months ago and it worked fine for a few days before randomly bluescreening often. Now I tried to change and install all the eight drivers, and while that solved most issues for awhile. But then I received a detection error 2100 main hdd0 on startup. Now I actually fixed it that time, and none of my files seemed to be damaged, which is strange given the nature of the error but I didn't question it. Now however the error is back seemingly inspired and I can't seen to get my laptop to simply boot. I ran the memory test and it passed and I don't even have an ssd so I don't know what the issue is or why it was fixed last time (I changed the SATA to compatability and then back to ahci and reset it). I think it might have to do with a faulty or corroded contact but I have not opened it to check. If it's anything like last time, I'm willing to bet that there is actually nothing wrong with my drive but something is again causing it not to be detected. I do have photos if that will help, but they need to be compressed so for now I hope this will be enough.

More replies
Relevance 78.72%

I have a Thinkpad Yoga which today was turned on while I was away (i.e. computer was not in use). When returning back the screen said "2100: Detection error on HDD0 (Main HDD)". Windows must have crashed (probably just another one of those faulty Lenovo drivers) and then the system couldn't boot up.
Everything seems alright after a hard reboot but I'm afraid my SSD drive has gone bad.
 
Link to image
 
Found a support document of the error on Thinkpads with Samsung SSD, but mine have a LiteOn. Can anyone help me find out why this happened and if anything is wrong with my SSD?
 
Thanks,
// Måns
 
The support document I'm talking about: http://support.lenovo.com/us/en/documents/ht082504
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

Answer:2100: Detection error on HDD0 (Thinkpad Yoga)

I have the same problem on a Lenovo Thinkpad, it does it once a day One way to fix it: Once it boot up wrong, press esc and the in the menu select the "Lenovo diagnosis" or something like this, once you see your 2 drives, you can reboot and it will work.When I launched a usb key while having the 2100 error, only the liteon ssd was detected... Might be a Hard Drive problem? (my thinkpad is only 3 months old) I tried updating my Bios, and I reinstalled windows. No differrences, still having a bug once every 2 or 3 reboot I'm trying to fix it soon and if no way, i'm going to make the warranty work(Sorry for my english, not my native language)

8 more replies
Relevance 77.9%

After about 18 months of use, I am repeadedly receiving the following errors on my Thinkpad Twist S230U (Model #3347CTO): 2100: Detection error on HDD0 (Main HDD)Press Esc to continue. (On Startup) or   Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. (0% complete)If you'd like to know more you can search online later for this error: CRITICAL_PROCESS_DIED (Windows 8 BSOD when I am in Windows) I am periodically able to login, so on my last login I did a complete refresh ran all the disk utility options, and did a complete refresh.  I just finished installing the 150 or so updates, did another run through the disk utility applications, and it is still doing it.   Any thoughts? I'm worried that it will get to the point where it won't startup again (and it is a huge pain when I am working and it goes BSOD on me).  There was nothing installed or any physical shock to the machine that would have led to this happening when it did.

Answer:2100: Detection error on HDD0 and BSOD on Thinkpad Twist

Hi Glennschatz,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that you are facing the issue with HDD drive on ThinkPad Twist S230u.
 
I suggest you to check with Lenovo diagnose tool, through which we can identify the exact error from that.
 
Below is the link to enter the downloads page and install Diagnose application and check accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
 
http://support.lenovo.com/en_US/downloads/default.page#
 
Hope this helps. Do post back if issue persists!
 
Best regards.

Hemanth Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

8 more replies
Relevance 77.9%

Hi there guys! First of all, it's my first time to post something here. Just recently purchased a Thinkpad Twist. However, after a few days, all of a sudden, I always get the error 2100: Detection Error on HDD0 (Main HD). I'm not sure what exactly is the problem though because after a few minutes, when I restart, it'll load Windows 8 back and eventually after a few browsing and use of computer, will force restart stating there's a problem encountered, etc. Once it restarts, it gives the same 2100 error again. Please help me guys as I'm really frustrated. I can't seem to use the computer normally without force restart due to error and loading windows 8 thereafter due to 2100 error.

Answer:Thinkpad Twist s230u 2100: Detection Error on HDD0...

I have the same problem. When I reboot the computer it keep on showing this error and it happened very often. But when you try a few time reboot it may be OK . So frustrated......I will call the support center...

7 more replies
Relevance 77.9%

Hi Lenovo Community,  around April/May I bought a T470 and since then my Notebook is crashing from time to time out of nothing with the apparently famous "2100: Detection error on HDD0 (Main HDD)" error.First this error screen shows up:     First error messageAnd it is shortly followed up by this one:Second error messageBefore starting this thread I had a look into the community and the older posts. This seems to be a problem which comes up often with all kind of Lenovo Notebooks (ThinkPads and also IdeaPads) however there was no thread for the T470 model yet and the suggested solutions (mostly only to update the drivers) didn't really solve my problem...!All my drivers are regularly updated via Lenovo Companion and yet the problem still comes out of nothing...Does anyone have an idea?Thank you.Best Regards,GT500M

More replies
Relevance 77.08%

After a windows update, the laptop started giving me this error. I attempted the quick fixes, such as going into diagnostic, the HDD isn't present there either. I've reseated the HDD, nothing is working. I believe this could be a chipset/IRST mismatch issue, I just need to know what to get and a suggestion on how to get it installed.  Ok yes it's an old laptop but I need to get it going even if only long enough to back up my data. I am desperate please any solution is a godsend at this point.

More replies
Relevance 77.08%

Hello everyone,
One fine evening while watching a movie, my laptop stopped responding and in frustration I switched off the laptop by holding the power button long enough to turn off. Next Morning it showed a blue screen and a message to recover my windows, which I failed to do and by the afternoon this message showed up. Detection Error on HDD0 (main HDD) and hence forth I've been unable to install windows from a USB drive since ( and I suppose) it is not able to read my HDD. I do not care about my data at all, I just want my laptop up and running. If I can have the data back it will be perfect otherwise I don't mind not getting my data back. I know for a fact that my Hard disk is fine because I went into command prompt, diskpart , and list disk, and saw the status of HDD as healthy, this is after the error (detection error on HDD). SO my question is: Why this error? IS there a problem in the motherboard? Why the error shows once and then doesn't show the next time and then comes up again.
 

Answer:2100: Detection Error on HDD0 (Main HDD); Lenovo Thinkpad Yoga

The error might be bad sectors, but I'm not sure. if my guessing is correct, you might have to get a new drive to replace. also you need to reinstall OS
 

2 more replies
Relevance 76.67%

Hi, So I just got my T430 in November and recently it had been blue screening. I decided to factory restore and ever since the factory restore I have been receiveing a 2101 Error every time I restart, and only when I restart. I have no idea what to do, anyone have a solution?













Solved!

Go to Solution.

Answer:T-430 2101 Detection Every Time I Restart

Hi, mboon
 
I tried to do some research on your error, but Microsoft has little listed for a code 2101 error. Could you possibly reboot your machine at some point and copy down the error message in its entirety? With more information, we might be able to figure out a fix.
 
Best, 
Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

5 more replies
Relevance 75.03%

Hello! I just recieved a new T530 I7 and also a Crucial M4 mSata SSD (CT256M4SSD3). The issue I have is sometimes the system will give a 2101 detection error at Post and the only way around it is to power off again, remove the battery/AC and try again. Ive seen other posts regarding this error but no clear resoution. 













Solved!

Go to Solution.

Answer:Intermitent 2101 detection Issues with new T530 and mSATA

Called Crucial support.   They had me change the Intel 7 AHCI controller driver from Intel to the Standard Microsoft driver.  They suspect that the Intel driver is causing the drive to not shutdown properly.  I'll see how it performs with the generic driver for awhile.

9 more replies
Relevance 73.8%
Question: x260 Error 2101

I have a X260 with a Samsung 850 EVO SSD installed connected to the normal SATA cable. Recently, the system ran down in hibernate or sleep mode until the battery was completely drained. The next time I started it up, Iwas presented with an immediate error after the logo of "2101 Detection error on SSD(M.2)". Booting into BIOSor UEFI diagnostics doesn't show any options for diagnosing the SSD. What is odd is there is no M.2 SSD. ?Right nowI am traveling and don't have a SATA-USB cable or another drive to try, but is there any possibility this is something other than my SSD failing completely? System does not boot. Things I have tried already: Reseating the SATA cable, Resetting BIO S to default settings, "Power Cycling" the SSD. All checks in UEFI diagnostics pass.

More replies
Relevance 73.8%

Hello,I just purchased new SSD ADATA Pro SP900 256GB SSD and when I want to boot my computer I got error2101  Detection error on HDD1 (mini sata).At the first start, there was no error and everything seems working but when I try to open SSD in windows, the disk was uninitialised. I tried to initialise it but without success, so I reboot the notebook and got this error. I installed lastest bios, try to remove SSD wait some time and reinsert it but the error still appear. Does anybody have solution? I figure that this error is quite common. Thanks













Solved!

Go to Solution.

Answer:E531 SSD error 2101

Hello, the problem was in faulty SSD drive. Seller told me that he probably got some bad series of this SSD because almost 60% of sold was not working, so I returned it and picked up Transcend MTS400 256GB which works like a charm.

1 more replies
Relevance 73.8%

Hello,I just purchased new SSD ADATA Pro SP900 256GB SSD and when I want to boot my computer I got error2101  Detection error on HDD1 (mini sata).At the first start, there was no error and everything seems working but when I try to open SSD in windows, the disk was uninitialised. I tried to initialise it but without success, so I reboot the notebook and got this error. I installed lastest bios, try to remove SSD wait some time and reinsert it but the error still appear. Does anybody have solution? I figure that this error is quite common. Thanks

More replies
Relevance 72.16%

Hi guys im loving my W350 but on start up I get an error message saying 2101 error miniSata drive not detected. It has also done this once whle in use which is more worrying. I have taken the keyboard off, removed the 16gb mSata and replaced it, but it still is not being detected. If anyone has any thoughts Id be really grateful. Cheers, Al.

Answer:W350 2101 mSATA not detected, anyone else getting this error?

Oh actually, after i put the drive back it it booted up and was visible in the  device manager, but dissappeared when clicked on.. thanks for your thoughts.al

5 more replies
Relevance 72.16%

Hi, I just updated BIOS ver. from 1.30 to 1.37. Had no problem with it. The system restarted and got the message that " 2101: Detection error on HDD2 (mini SATA)" This is a Crucial M4 256Gb SSD, which I'm using since 5 month. Changed it back to my old KINGSTON 64GB SSD , and it works. I've downloaded BIOS ver 1.3 , downgraded the system, but the problem still exists.It boots without any problem with the Kingston , but not with the Crucial. Currently I don't have another computer to test the Crucial SSD if it's broken, but I think it's rather BIOS related. Plese advise what to do now, because I had all my work on that SSD.  Regards,Gabor













Solved!

Go to Solution.

Answer:T420SI 2101 ERROR after BIOS update

Contact Crucial. If another drive works then it may be dying and the error is a result of the status.





T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Win 10 64bitZ70-80 I7 - 5500U 16GB GB - 1TB HD Win 10 64bit FHD 17.3", G840 w/2GB

2 more replies
Relevance 71.34%

So I've read through the history of the msata and the x220 (4286-CTO) and how the BIOS revisions were required during the middle of last year in order to get the Intel 310 and some others to work. Thinking that my little x220 with Bios revision 1.26 (i7, 8gb, 4286-CTO) would be fine, I purchased a Kingston SSDNow mS100 64GB mSATA Internal Solid State Drive SMS100S2/64G and installed it yesterday. The instal went without a hitch, but when I restarted the machine, I received a 2101: Drive detection error on hdd2 (mini sata) error.   I've seen that the 2101 error has been mentioned in relation to a couple of Sandisk msata drives on the forum, but those discussions didn't seem to go anywhere. I just got off my second call with Lenovo support (30 minutes today and 25 minutes last night), only to have them tell me that msata is not supported by my 4286-CTO.  That sounds incorrect, as others with the 4286-CTO seem to have luck with Intel and Renice. What am I doing wrong?  Is this something that another BIOS revision could cure?  At least on one of the sandisk discussions, the OP said that he/she had tested the drive in another computer without a problem, so I don't think it's a problem with the actual drives.   Somebody else mentioned that some drives are not compliant with the JEDEC standard, but that doesn't sound like an explanation to me either.  Thoughts?  Help! Best, sad x220

Answer:2101 Error: X220 with Kingston 64GB msata

I have the same issue with x220.  The mSATA I have is the Sandisk SDSA4DH-064G.  I can also add that the function of the mSATA is the same regardless of whether the mSATA is used in the mSATA slot or on an adapter card in the SATA hard drive bay (Error is 2100 rather than 2101, but the text is the same).  For this reason, I believe the Lenovo BIOS is unable to configure the mSATA drive appropriately.  I imagine that Lenovo could quickly resolve this with a new BIOS. I have tested this drive on a desktop consisting of a Asus P9X79 Deluxe + Intel 3960x running Windows 7, 64-bit.  Device is recognized by BIOS and WIndows Disk Manager. 

9 more replies
Relevance 68.47%

When I try to boot my W520, I get a BIOS boot up error : "2100: Detection Error on HDD0 (Main HDD)". I am using PNY XLR8 240GB SSD. It worked fine for a month. I also have PGP installed and whole disc encrypted. I installed an update of Intel Management Engine Firmware and Intel Chipset, both are the latest from lenovo site because I was experiencing expreme slowness from my harddrive. Programs would freeze. Webpages would take forever to load..The next time I rebooted, I got the error. If I leave the SSD out for a bit, and put the SSD back in, the disk will work for some time... but on next reboot, it is again detection error.. TRIM is enabled on my system. I am not sure how the SSD died so quickly. I am back to using my HDD but I am not happy. I want a solution... is this a intel chipset issue? Intel IMEI issue? Is  the PNY SSD just a bad model? I've googled plenty and dont really see a solution. Sometimes there is a firmware update.. PNY has no firmware updates for my drive.. I don't see anybody else using PNY on their W520, but plenty of people are experiencing Error 2100 with SSD on their W520.. somethings fishy.. help please! thanks in advance !

Answer:W520: PNY XLR8 240GB SSD with error "2100: Detection Error on HDD0 (Main HDD)"

Hello,
I don't have a ThinkPad W520 or a PNY SSD, but could it be simply that the SSD is coming loose inside the ThinkPad's chassis?  I suppose this could occur if a 7mm high SSD was inserted into a 9.5mm high 2.5" drive bay with a ~2mm spacer to "pad" the unused vertical space.
 
Regards,
 
Aryeh Goretsky
 

3 more replies
Relevance 68.06%

I've had my T430 for about a year, and other than two Corsair RAM sticks failing my computer has been running smoothly. Last night, my computer suddenly froze up and now it won't recognize my SSD. I'm currently using my stock HDD, but now I can't access any of the data on my SSD. I've tried running the SSD firmware update from the Lenovo site, but it wouldn't show my SSD under the memory devices (I'm not sure if this particular SSD is supported by the firmware update either). I don't think lenovo customer support would help in this situation, since my stock HDD runs fine and I didn't buy the SSD from them, so any help would be appreciated.

Answer:T430 "2100: Detection error on HDD0 (Main HDD)" Error on Samsung 830

I have the same problem that I ran into for no reason.  Does anyone have a solution for this?  Luckily I was able to login to safemode once and did my data back up after I could not login to safe mode.  The moment I connect to net work this problem happens.  On a side note I bought this T430S on ebay 3 months back with 16GB Memory, 500GB SSD which was running pretty good.

1 more replies
Relevance 68.06%

Hi, I have a month old T440s. It has the original 256GB SSD drive (didn't open\replace anything).After uninstalling some antivirus software win8 had problems booting. To make a long story short, I tried different things to fix the MBR and eventually got to the point of trying to do a full factory restore, which didn't work (it couldn't find the recovery partition).When I boot up now, I get the "2100: Detection Error on HDD0 (Main HDD)" error.Aside from trying to restore using Lenovo CD (shipped to me, will be here in a couple of days), what else cn be done and what caused this ordeal? I don't mind about the data on the SSD, I just really need my laptop functioning ASAP. Thanks for any advise you may have!

Answer:Brand new T440s (original 256GB SSD) - Error 2100: Detection Error on HDD0 (Main HDD)

Hi,check out the disk drive model. If that's a Samsung SSD PM841, refer the page below regarding firmware update affected models:http://support.lenovo.com/us/en/documents/ht082504

7 more replies
Relevance 68.06%

Hallo, Since the past couple of days I am receiving this Error 2102: Detection error in HDD2 during every cold/warm boot. It pops up even after a complete powerdown for overnight and boot up the next day. Further, the boot itself has become very slow - shows blank screen until the Thinkpad logo is displayed, followed by which the error message pops up. Thanks in advance for pointers!!! P.S: I looked up in the community for similar errors - only couple found and no solutions.----------------------------------------------------------------------------------------------------------------------------------------------------------------Thinkpad Edge E530 - i5-3210M -upgraded 8GB RAM - 750 GB, 16GB mSATA HDD Performance Booster  













Solved!

Go to Solution.

Answer:Edge e530 - Error 2102: Detection error in HDD2 - press escape to continue

That error is coming from BIOS, it means there is something wrong detecting the mSATA SSD.  It could point to a hardware problem.  It is definitely not a software problem.  I would call the support line in your country, and ask what they recommend about it.

2 more replies
Relevance 68.06%

I have an issue with a Lenovo X1 Carbon Touch Windows 8. It has a 512GB SSD. (Believe its Samsung)  Earlier today the computer frooze while saying plug in your charger, so I had to hold down the power button to do a forced shutdown. Upon turning it back on I got this error after hanging on the Lenovo logo for a good five minutes. Error: 2100: Detection error on SSD0 (M.2) The SSD is not visible anywhere not in BIOS or anywhere else. I've tried reseating it however it doesn't help. The BIOS is upto date, any I'm unable to update the SSD Firmware as I cannot get onto Windows as per the instrutions here - http://support.lenovo.com/us/en/documents/ht082504 1. I cant update firmware for the SSD as I cant get onto Windows2. The BIOS firmware is the latest 3. I've taken the SSD out and put it back in4. Reset BIOS settings5. Disconnected Battery and left it for an hour I'm panicing as all my data is on there, I assumed it was safe as it's SSD.  Please can anyone assist?  

Answer:X1 Carbon - SSD Failure? Error 2100: Detection error on SSD0 (M.2)

Sorry for a 2500 GBP laptop I'd expect better really. This is the SECOND X1 Carbon I've had out of 4 to fail me with the SSD. I've lost all my data (Yes I know I should have backed it up) that I'll never be able to recover. Ultimately I've given up on the brand of Lenovo, my company who supplies exclusively Lenovo hardware to our customers are now switching to Dell as a direct result of the lack of support and poor hardware/firmware design. Just ordered 2X Dell XPS 13's as a replacement for my less than 6 month old Lenovo X1 Carbon, never thought it would come to this but the lack of support, knowledge and consitant hardware failures has left me no choice, I can't operate or do my work on an Lenovo X1 Carbon, fingers crossed the Dell will be better as it cant get any worse than Lenovo. To anyone who has Google'd the error and found this thread some cold facts; According to my resources this error can be caused if the system is not shutdown, BSOD or sudden power loss. If it doesn't resolve itself, there is a good chance it wont. Cycle the computer numrous times, let the battery run flat. Try it a few more times. Reset the BIOS, Update the BIOS. Prevention is better than cure, supposedly updating the SSD Firmware might have prevented this from happening in the first place.Lots of reports that this is an issue with BIOS and Firmware issues that result in an early death. I can confirm this having happened twice to me on different generation and model... Read more

3 more replies
Relevance 68.06%

I'd lost my power cord and haven't been using my E220s for few weeks.When I finally bought a power cord, the screen only shows:Thermal sensing error.2103: detection error on HDD2 (mini sata).And it turns on.How do i fix it?

More replies
Relevance 66.42%

(i have updated the title. sounds more like it. ^_^) Greetings ! I am a proud (well, yes ...) owner of the E530 A3G-Model sporting a 16GB SSD.Yes, the one with the pulsy, noisy fan. ^_^  The Story: Last week i thought i'd need a change and try something new. As i'm not really a noob oncomputers, i thought i'd set up Win7 x64 SP1 on the SSD. That's ... not that easy,considering the size, so i've spent the weekend removing irrelevant components ...... like Natural Language, Speech Support, Language Packs ...... from the Win7 x64 SP1 Installation Disks. It took me two days to get it to work, with several testing sessions using VirtualBox,but then i got it right. I haven't removed any drivers, services or anything actually essentialwhich could break the system. (I promise!) So ... after a long session in VirtualBox and installing this system on a small partition on my HDDto verify it REALLY works, i went going on to install it on the SSD. Please note that RapidBoot is turned off in the BIOS and i have removed ExpressCache,which i had previously installed manually, but wasn't actually caching anything anymore,for reasons i don't understand. Maybe i have turned it off weeks ago, i don't know. So, i have set up a 3GB FAT32 partition at the beginning of the SSD for the pagefile. It's a habit.It's a good idea to do this on HDDs, so i kept doing it. Longevity of the SSD was no issue for me,as if it breaks ... well, then it breaks ... but the... Read more

Answer:ThinkPad E530 and the case of the vanished SSD (msata 2101)

Oh ... i forgot to mention that the 2101 error doesn't even show up anymore.

1 more replies
Relevance 66.01%

Please, any idea how to fix error 2104 with laptop ThinkPad p50 full error message >>  2104: Detection error on Storage Device2 (m.2)

More replies
Relevance 61.91%

Hello..... i run the hardware scan on my t450s, and return with these error.... any help suggestions: Motherboard: ....  Result Code: WMB01R010-UL7Y0I thanks



T400, 2764-CTO, Win-Ultimate, Intel T9400, RAM 3 Gb, 160 Gb, Ati 256 Mb.T60,T40

More replies
Relevance 61.91%

Hi,  we recently received a number of T450s laptops and we are trying to install teh management engine components update using system update to fix a bsod issue.   We have successfully downloaded and installed the update several times but on this one laptop (which is identical to the others), we are getting the following error The setup program ended prematurely because of the following error : The installation source for this product is not available.  Verify that the source exists and that you can access it. I have tried installing the file using system update, downloading and manually installing it.  Removing intel option from device manager and reinstalling.  Rebooting, etc... Is there any way to fix this? Thanks, Derek

Answer:T450s - system update error

HiDid you reinstall TVSU after its current version has been removed completely? And then install the drivers, updates you need.

3 more replies
Relevance 60.68%

We're planning to push BIOS updates to all our systems in the near future. However, in testing we've noticed that some systems will fail installation with error code 211. The problem seems to be related to a changed BIOS logo, since when ran manually, the updater asks if it should overwrite the existing logo or keep it. This seems to cause problems when you run the BIOS update executable "winuptp64.exe" with the "-s" (silent) argument.Is there a solution to this, like an argument that forces overwriting of logo or keep existing? Full error log:[2018/1/24 11:40:47] version 25.26
OS = Windows 10 64bit
Driver Loading....Done
System BIOS Version -> JBET54WW
Applying BIOS Version -> JBET66WW
Keep the custom start up image of the system.
System EC Version -> JBHT15WW
Applying EC Version -> JBHT17WW
AC adapter/Battery check....OK.

BIOS Flashing....
The number of retries of BIOS update = 1
The number of retries of BIOS update = 2
The number of retries of BIOS update = 3
Failed.
Error : Fail to do module option.

Error code = 211

More replies
Relevance 60.27%

Hi, I would like to get some help about my dying, 5 years old, T43. I tried to start it yesterday, and the text "error 0187 eaia data access" popped up at the top-right of a black screen, before windows had time to appear. Today, it's even worst, the laptop completely refuses to boot. There is no response at all, when I press the power-on button. I think that there might be a problem with the back-up battery, because just before showing me this type of error, it was having trouble to keep time. Before going in further investigation for this hardware problem, I would like to get some advices... Thanks, Jc

Answer:Thinkpad T43 error:"error 0187 eaia data access"

I forgot to say, that I'm at my first steps in this forum, and that I'm sorry if that question has already been asked...

2 more replies
Relevance 60.27%

There was a grammar issue on a message that displayed from the Rescue and Recovery application.I took a screen shot in case it is needed. The text readsTitle:Rescue and RecoveryMessage:Rescue media enables you to access Rescue and Recovery tools, evenyou are unable to start Windows(R) environment, do you want to makea rescue media immediately?There is an "if" missing between the first and second line.Also, the last question should be it's own sentence. Unless you want to break it with a semicolon.

More replies
Relevance 59.86%

I have an emachines e520 laptop and am trying to go from Ubuntu to XP, however every time i try doing the install, it blue screens and gives me the "STOP: 0x0000007B (0xF7AF4524,0xC0000034,0x00000000,0x00000000)" error.

I have downloaded the drivers and included them into the XP install disk. i made an iso file from the boot disk and then added the drivers to the ISO and then burned it back to a disk. And still no luck. I do press F6 but it still goes to expect it from a floppy drive, which the laptop does not have.

the HDD in the system is a sata drive and Sata mode is set to AHCI in the setup utility of the comptuer.

Help!
 

Answer:HDD detection error

Try setting the mode from AHCI to IDE in the BIOS, then boot from the Windows CD.
 

2 more replies
Relevance 59.45%

The initial setup of the FP sensor for Power On PW in Bios and also for logon to Win 10 went smooth.However, it happens in a few days already 3 times that the re logon to Windows after time controlled lock of Windows with FP sensor didn't work.After signing on manually to Windowsusing the keyboard the FP sensor had an error code 45 in the device manager, "currently this hardware device is NOT connected. To fix this problem, reconnect the hardware device."My workaround is shutting down the machine, fire up again, go in Bios settings, just walk through Security Fingerprint settings, change nothing, but nevertheless save changes and let it boot again.The logon process to Windowws then works again and the FP sensor no longer has the error code in the device manager.The workaround works, but is of course annoying anyway... Any idea how to fix this?

More replies
Relevance 59.04%

I purchased an X1 Yoga w/ 512 GB SSD / i5 a couple months ago - loved the laptop.  After a week or so using it I started getting random blue screens of death.  Following the BSOD, the laptop sometimes reboots normally, other times displays an error during boot "2101: Detection error on SSD (M.2)."  If this error message is displayed, the laptop won't boot and has to be restarted again.  After restarting anywhere from one to five times, it returns to function normally.   After experiencing the same problem intermittently for a couple weeks, I finally called Lenovo and reported the issue and registered to return the laptop, ordered a brand new one (again X1 Yoga / 512 GB SSD, this time i7).   After waiting a couple weeks for delivery, I received the new laptop a few days and freshly installed all of my software, transferred my data over from the faulty laptop, and got back to work as of yesterday.  Everything seemed fine, but then again today I got a BSOD with the new laptop, and the same SSD error!   I can't find much information about this error via Google search, and only found one or two posts on the forum here referencing it that aren't very helpful.   It seems like this must be a relatively uncommon problem, but I've had it with two independent laptops.  I haven't installed any exotic software or made any customizations to the laptop - it seems unlikely that I am causing this problem myself.  ... Read more

Answer:Detection error on SSD (M.2) - X1 Yoga

Does anybody have a clue as to why I would have this SSD detection error issue on two laptops in a row?  The new laptop continues to bluescreen with a "Critical_Process_Died" message once or twice each day, seemingly at random.  It sometimes refuses to boot with the "Detection Error on SSD (M.2)" message.   I'm getting ready to send this second X1 Yoga back to Lenovo in the next few days if I can't find any explanation for this. Any advice from Lenovo?

9 more replies
Relevance 59.04%

Set-up detection errorHi I have just formatted the hard drive and I cant get past this Error SU-0013I am trying to load the first Win 95 via the CD Drive.I have been asked if I have HPFS or Windows NT file system?Also to create an MS-DOS boot partition, and if I have a Lantastic server or Supper store compression, and to disable it before running set-up. Message:- See set-up text on set-up disk 1 or on the CD-ROM.I have used Windows 98SE to boot as the 95 Diskette will not. Any advice Welcome.Ex

Answer:Set-up detection Error SU-0013 WIN 95

As a matter of interest I can load Win 95 with USB support OK. I already have that on a PC.But my interest is in the early 95.I bought a load of oldish Dells and I hope to load each PC with software of its time up to present Day.Ex

10 more replies
Relevance 59.04%

All right, I just built a computer, and whenever I plug the dvd burner into the motherboard, it won't get any power, but when I unplug the IDE cable from it, it gets power just fine. I've tried using a different cable, different CD drive, and unplugging unnecessary things (video card, ram, hard drive, etc.), and same result every time, anyone got any suggestions? Here's what I got:
AMD Athlon 64 3700+
ASUS n-force 4 motherboard A8N5X
1 gig stick ECC PC3200 ram (x2)
250 gig SATA hard drive
Geforce 6800 PCI-E 256 MB vid card
500 W power supply

More replies
Relevance 59.04%

Hey all,
I need to be able to write a code in java that can detect errors in a bit string of any length. I think a good place to start would be learning exactly what and how hamming's error detection code works. anybody got enough time on their hands to help?
 

Answer:Hamming error detection

oh yeah, and can anybody tell me how to change my profile from private so i can send PM's? thanks all
 

2 more replies
Relevance 59.04%

hello, I've a Lenovo Thinkpad Edge E5320 Core i5,and every time if i start my laptop afterwards he was or outor standby i get a error thats called; 2102the remainder text in the error message is:Detection error on HDD2  (Mini Sata)i'm wondering wat it is an how i can fix it? i'm hoping for a quick answer, thanks TT de Souza

Answer:2102 Detection error

Hi, TTdeSouza
 
I did some quick research to see how others have gone about fixing this error. I found this thread here from a Lenovo employee on the same issue. According to the employee, someotherguy, the issue is indicative of a hardware fault. Due to this, I would recommend giving Lenovo Support a call at your earliest convenience.
 
Hope it helps,
Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

1 more replies
Relevance 58.63%

Windows 98Am getting a message when loading internet explorer stating that "Install on demand has detected an error - unspecified". Underneath this box is another box that states " Need to download & install VIsual Basic Scripting Support". However, when I click on the "unspecified error" box it gets rid of both.Do I need to download and install this, and if so, any ideas on where i can find this from - microsoft website can find download but hangs computer.Also - don't know if it is related - but problems with mouse on internet explorer - can point and click, but will not acknowledge text boxes within websites.Help needed asap.Thanks

Answer:Install on Demand detection error - help please

Sounds like you could do with a repair of Internet explorer. Either reinstall it, or if you have IE6, go to add/remove programs and choose to removeIE and you will get an option to repair.

1 more replies
Relevance 58.63%

Hello,  still getting HDD detection error after computer went in to the sleep mode. 2100: Detection Error on HDD0 (Main HDD)HDD protected with bitlocker, Win8 Pro system. SSD Intel has been checked by intel checking software: no fault, lastest firmware.How to fix this? Should i change disk by warranty? Thank YouLooking forward













Solved!

Go to Solution.

Answer:Think Pad X230 HDD Detection Error 2100

I had this with a Crucial M5M mSATA SSD, and the solution was to turn the machine off for 20 minutes with no battery and and no power connected, then try again. The drive failed totally about 2 weeks later though.  

1 more replies
Relevance 58.63%

Hi there,I bought a x1 carbon 3rd gen and it has been working with no issues until today. I bought the 512gb ssd option. Suddenly, I am getting the mentioned error, 2103 detection error on ssd0 (m.2), each time I power on the laptop, with no possibility of booting into windows, etc.... Is this a failure in the ssd? Any suggestions?Any help would be really appreciated.Thanks.











Solved!
Go to Solution.

Answer:2103 detection error on ssd0 (m.2)

HiWhat's the SSD model?

9 more replies
Relevance 58.63%

Hello all. I've got a user who's T430s just goes to the ThinkPad logo and then after several seconds moves on but never gets to loading Windows. We just get 2100: Detection Error on HHDO. I had another T430s so I swapped drives. Now the T430s that wasn't booting boots fine. So I assumed the hard drive was going but the odd thing is that the 2nd T430s which now has the "problem drive" in it doesn't give me the 2100 error. The catch is the drive is encrypted with BitLocker and no combo of passwords or finger swipes will let us proceed. So my dilemna is I can't tell if this drive is bad because I can't see it. I ran Lenovo Bootable Diagnostics and they said they couldn't scan because it was encrypted. I put the drive in an external dock and connected it to a Windows 10 system and the drive doesn't show up under the Bitlocker to Go section. Is there any way to tell if this drive is completely done? It would be great to get data off of it but I can't seem to find a way. Everything I find seems to require a drive letter and this drive has none. Even booted into a live Ubuntu with the drive in the laptop and it wouldn't see it. Thanks all. 

Answer:2100: Detection Error on HHDOcan

A lot of people have had this issue with perfectly good drives, and some have said they resolved it by going into setup, and then saving settings upon exit.   Others have said that by pressing F12, entering the boot menu and selecting the HD will let it boot as well.    Another said that by changing from SATA to Compatibility in the BIOS, restarting and then setting SATA back to AHCI will force a reset of the drive so it will boot too. Not sure if any will work for you, but you might put the drive back in the original system and give it a try (if you have not already anyway). I did see also where Amy_Lenovo posted in the same thread that a fix was found for the X250 ThinkPads, but that it required the system be sent into Lenovo.

1 more replies
Relevance 58.63%

I am trying to run an online virus scan from symantec at http://security.symantec.com. I click the virus detection button and the scanning screen opens. The scan does not start. I receive an error message "unable to run virus detection"-In order to run Virus Detection you must be using Microsoft Internet Explorer 5.0 or higher with ActiveX and Scripting enabled.
I have checked my internet options under the security tab. I defaulted my options and made sure activeX and scripting is enabled. I have windows xp pro with Internet Explorer version 6.0
I have tried reinstalling IE6.0

I have an antivirus program and I am not at risk. How can I fix this problem? thanks.

Site of the message i receive:
http://security.symantec.com/sscv6/...ie&venid=sym&plfid=23&pkj=WGVMRHYTINMHDKDCWLL
 

More replies
Relevance 58.63%

Hi all

I've been testing AVAST 4.2 fairly rigorously on both VISTA X-64 and W7 7100 X-64.

Straight from the MS site I downloaded the .VHD Virtual disks (XP compatability mode)

AVAST reports that the .VHD file contains a "COMPRESSION BOMB". Now this doesn't actually tell me what this is -- but the fact that it reports something with the word BOMB in it means it can't be good.

Now as this VHD file was downloaded from the official Microsoft site I assume it HAS to be OK (or does it - I would imagine MS regularly checks its own websites - there's plenty of people out there who'd jump at a chance of attacking a MS site if they could).

I'm going to download the XP compatability mode again and have another scan.

VISTA again reports the file as CLEAN) so I think there still might be a couple of things AVAST need to fix in W7 when reading compressed or "archive" type files.

I can't post the screenshot -- once I see something with the word "BOMB" in it I immediately WIPE the entire machine. Schnell Fast, Pronto.

Cheers
jimbo

Answer:Avast 4.2 - Error in detection in .VHD file

The Avast forum reports this: A decompression bomb is a file that unpacks to an enormous amount of data - thus "flooding" the unpacking engine. It's quite hard to detect such files reliably, so it's possible that it gives some false alarms ocassionally.

The entire forum is here,
Hope this helps..

4 more replies
Relevance 58.63%

Hey! I have a Lenovo Thinpad R61i laptop and when I turn it on I receive 2100: Detection error on HDD0 (03). I reseted the BIOS and I've extracted the HDD and tossed it again. No solution! I need to power off it 2 times before it enter the Windows. Please help me!













Solved!

Go to Solution.

Answer:2100: Detection error on HDD0 (03)

Hi NRCS,Warm Greetings & welcome to Lenovo Community, happy to have you here.As I understand that you are facing issue HDD 2100: Detection error on HDD0 (03) in your ThinkPad R61i.
As you have said system is booting in Windows at that time you can try to run Lenovo Diagnostics for complete checkup of your hardware components & update us how it goes.
I hope the above information helped you.
Please feel free to post in Lenovo Community Forums if you have any further queries!
 
Regards,Prabhansh_______________________________________________Tap that Kudos button if I helped.If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

9 more replies
Relevance 58.63%

Hi,
I have Lenovo laptop which getting 2100:Detection error on HDD0. What does it means? I couldn't get into windows.

Answer:2100: Detection error on HDD0

seems to be a common problem with lennovo laptops if it is a thinkpad yoga popping over to lennovo support and downloading chipset and IRST drivers then updating may be the way forward. install chipset 1st then IRST
click here click here
Drivers

3 more replies
Relevance 58.63%

hi,
We are using Dell computers in our company. We have a P-I machine with 3Com network card running on Windows NT Worstation. I shifted the "Harddisk AND Network card" to another P-II Dell machine. When I start this system , the Network card is not detected and I am not able to Login to the Domain and the system deosnt get the IP address from the DHCP Server. I get the following error in the Event Viewer:
"EI90x: Could Not Find Adapter"

I want to know what are the issues that prevent a Network card from being detected. This happens even if use another Network card.

I need help real BAD.

Thanks in advance
 

Answer:Network Card detection Error

7 more replies
Relevance 58.63%

I bought a 120G Crucial M500 mSATA ssd a while back and have been seeing fairly consistent boot errors saying it can't detect the ssd. This is my boot/root drive, and the laptop runs fine for days/weeks at a time without problem. Which is odd, because I can boot off that ssd just fine after pressing escape to ignore the error. Sometimes from a cold boot it doesn't happen, but pretty much 100% of reboots result in that error message. Is there a way to fix this? It's rather annoying to have to babysit the laptop on boot.













Solved!

Go to Solution.

Answer:W530 and mSATA detection error

Hello and welcome,
 
Have you checked with Crucial?  I had similar-sounding issues with an M4.  Sometimes the SSD is slow to come on-line due to internal house-keeping work.
 
Perhaps there's a firmware update or work-around.
 
Z.

3 more replies
Relevance 58.63%

At the risk of probably repeating this question..Why won`t the Dell system detect program run?? Get this error message. The following properties have been set:Property: [AdminUser] = true {boolean}Property: [InstallMode] = HomeSite {string}Property: [NTProductType] = 1 {int}Property: [ProcessorArchitecture] = AMD64 {string}Property: [VersionNT] = 6.1.0 {version}Running checks for package 'Windows Installer 4.5', phase BuildListLooking up path for special folder 'WindowsFolder'Running check with folder 'C:\Windows\System32' and file 'msi.dll'Attempting to find file 'C:\Windows\System32\msi.dll'File version is '5.0.15063.0'Setting value '5.0.15063.0 {version}' for property 'VersionMsiDll'The following properties have been set for package 'Windows Installer 4.5':Property: [VersionMsiDll] = 5.0.15063.0 {version}Running checks for command 'WindowsInstaller4_5\WindowsXP-KB942288-v3-x86.exe'Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '4.5': trueResult of checks for command 'WindowsInstaller4_5\WindowsXP-KB942288-v3-x86.exe' is 'Bypass'Running checks for command 'WindowsInstaller4_5\WindowsXP-KB958655-v2-x86-ENU.exe'Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsiDll' and value '4.5.6001.22299': trueResult of checks for command 'WindowsInstaller4_5\Win... Read more

More replies
Relevance 58.63%

I have a X1C 3rd (2015) .it runs a win10 and works well,several days ago  the OS auto update for something what I really don't notice the detail,and the laptop cannot boot the OSanymore.when it starts ,it'll show 2103 detection error on ssd0 (m.2) on the lcdI run the diagnostic,all the test can pass.But I still can't find the ssd even in a PE recover modewhat can I do ,any can show some help pls. PS.the SSD is PM851 256GB Samsung?

More replies
Relevance 58.63%

I got a new T440s with a standard disk hard drive. My coworker gave me a Crucial SSD 512GB drive to swap in its place. I imaged the current drive on to the SSD and inserted it. Upon boot, before the boot sequence I receive the 2102 error. There is nothing in the SSD2 slot, as we didn't buy this option. The theory in my workplace (tech firm) is that I may have accidentally turned power on while swapping the drive while no drive was in the primary slot. How/where in the bios do I keep the machine from looking into this slot to boot? Currently what happens is the error is thrown and I have to hit escape to boot windows. This is a minor inconvenience, there is no loss of functionality, but when powering up on a dock or rebooting, it requires user presence. Thanks for your help.

Answer:2102: Detection error on SSD2 (M.2)

t440s might have three slots for drives - one sata III 2,5" and two m.2 slots. Usually new laptops with HDD are shipping with cache m.2 SSD which is placed in the 3rd slot. Since error 2102 is msata drive detection related I'd suggest to check out your laptop configuration and remove small SSD since you have primary SSD drive. But at first check out the function of small SSD drive - cache only or/and hibernation partition storage. And disable appropriate features for that drive.

4 more replies
Relevance 57.81%

Received my t450s last week, and haven't determined this was an issue till last couple days - have looked around the forums to see whether I'm the only one, or others have this issue: The "v" key doesn't seem to work like the others.  One of my most used passwords begins with "v".  I was getting a sign-in error for a few websites I log into, and so I'd have to enter it a couple times.  Then I noticed that the "v" will only register when it's pushed down a certain way - if I push straight down on it, it'll work.  If I push on the left side, it doesn't register the keystroke (unless I push hard down to the bottom of the stroke).  All the rest of the keys work perfectly. Am I just being too picky?  I don't think so, as I'm just comparing the stroke of one key to the others on the keyboard, and determine there's a difference.  Any comments or solutions?  thanks 

More replies
Relevance 57.81%

Good day dear forum members! My brand new X1 Carbon arrived fully loaded......with errors. Right out of the box it hit me with a BSOD (CRITICAL_PROCESS_DIED). The system boots from the second attempt, but BSOD pops up every 5-10min. All drivers/BIOS updated. 1TB Samsung nvme ssd (PM961 f/w3L0QCXY7) seems to be using a driver dated 6/21/2006 and so does its "Standard NVM Express Controller". Samsung nvme driver cannot be installed because it claims there's no suitable ssd, Samsung magician doesn't recognize the drive either, however, it is properly identified in the device manager. Any suggestions before I ship this back..? Any help appreciated.
 
Moderator note: post edited to comply with Community Guidelines

More replies
Relevance 57.81%

is my T420 dead?...can buying a new SSD get it going again? (Currently Samsung)  

Answer:2100: Detection error on HDDO (Main HDD)

Just wondering if this is SSD related or Motherboard related?....should I just get another SSD or stay away from SSD and go back to a regular drive?

4 more replies
Relevance 57.81%

I have a T420 and tried a Crucial M500 but kept getting the 2100 detection error.   I'm wondering if the mSATA version would be OK or if this problem is present on both the main SATA bay as well as the mSATA connection? Has anyone had this error when booting an SSD from the mSATA port? Thanks! 





T400 6475-8Q5 | 8GB RAM | WXGA+ | Seagate 500GB 7200 | Win 7 Pro 64-bit............T61 7658-CTR | 8GB RAM | WD Black 320GB

Answer:Has anyone had the 2100: detection error on the mSATA port?

I run a Crucial m4 mSATA 256GB in my T420.
 
As I mentioned in your other thread, I saw the error once or twice - IIRC on the very first power-up and again after a firmware update.  Once the SSD finished its internal housekeeping, it never happened again.
 
Z.

6 more replies
Relevance 57.81%

I just bought a W550s, and have just installed all the current windows updates, added my antivirus, office suite, adobe suite, winrar. That's pretty much everything I've done to it so far. Just booted it up after installing most recent windows update. Came up on the black screen "2102 detection error for SSD2" Press ESC to proceed I've had lenovos (Thinkcentres, thinkpads), but never really had these kind of issues. What is the best process to get a hold of support? Nothing wrong with phone support, but I've found myself clicking through the suitable options and being on the phone with a software company that has no real relation to Lenovo, so I'd prefer to at least start a ticket/investigation by email/online.

Answer:W550s: 2102 detection error for SSD2

Hi Lolenick,
 
Welcome to Lenovo Community!
 
As per my knowledge the issue is indicating to mSATA drive which will serve as SSD2 and it is giving error. I?d suggest you to look at your laptop configuration and remove small SSD since you have primary SSD drive. But at first check out the function of small SSD drive - cache only or/and hibernation partition storage. And disable appropriate features for that drive.
 
Hope this helps!!
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 57.81%

Hi,  I need to upgrade the firmware of the SSD and when I put the SSD in Lenovo laptops in ROM mode. I get the following error "2100 Detection Error on HDD0" as disk can't be read.  After this it asks me to press "ESC" to continue. I want it to go to PXE boot when the DISK failure is found as I push OS in the RAM and then treat this disk as secondry (SSD) and then recover it.  My boot order is set as :: SSDPXE  Can some please help how can I avoid getting in the Press ESC to continue and make machine reboot automatically? By the way its 440P lenovo machine I tried this stuff on. Any help is appreciated. Thanks-Vishal

More replies
Relevance 57.81%

hello.  I have a E540 laptop with a ssd.  Recently I have gotten this error when starting up my computer : 2100 detection error on hdd0.  To get past it I have turn off and on the laptop multiple times.  Does anyone have a fix?

More replies
Relevance 57.81%

when this error pops up the only thing that is noted as [failure] is my media how do i solve this problem 

Answer:2100 detection error on HDD0 [mainhdd]

Hello ryuyankataso, welcome to the community,
 
could you maybe post which Lenovo notebook you have as this will help members to assist you best.  Quite often this error wil indicate that a hard drive has failed but can also mean that it has jogged loose and just needs removing and replacing.

2 more replies
Relevance 57.81%

I have a Lenovo ThinkPad Yoga, with a 256GB SSD and an i5 processor. I received it on April 29. After two weeks of normal use, it crashed and gave this error:?2100: Detection error on HDD0 (Main HDD)?I could not get it to boot. I took it to a computer repair shop and they (Lenovo warrantee) replaced the SSD. It worked for about a week, then crashed again, same error. My tech guy said that it might be a bad board, frying hard drives; but Lenovo insisted on replacing the hard drive again. Ten days later, same crash. I unplugged it and put it on a shelf for the weekend, intending to take it back to the shop. Monday morning I plugged it in and it started up normally. It has been working normally for three days, but I am worried about getting the same error and crash. Can you tell me what might be happening, and if there is anything I can do to prevent a recurrence? This seems to be a common problem across many machine models, but I haven't found any solutions to it.  










Solved!
Go to Solution.

Answer:2100: Detection error on HDD0 (Main HDD)

The connector or the data controller board could be shortcurcuiting the ssd.

9 more replies
Relevance 57.81%

Hi, I bought Thinkpad Yoga last year. The Yoga originally came with 512 GB HDD plus 16GB SanDisk SSD. A couple of days ago, I replaced the original HDD with Crucial BX100 SSD (500GB). Since then, I have the 2100 error. It goes like this. When I boot the computer by pressing the power button on the side of the computer, it boots well. About 30 minues later, the computer suddenly loses connection with the newly installed SSD, and shows 2100 error message on black screen. When I press any key (as instructed on the screen), the computer shows Boot Menu. But the Boot Menu lists only ATA HDD1: SANDisk SSD U110 16GB.  When I reinstalled the original HDD, 2100 error didn't happen. But I don't want to use HDD anymore for speed issue.  If anyone solved a similar problem, please help me.  Thanks in advance.- H_Kim.  

Answer:2100: Detection error on HDD0 (Main HDD)

This is not just that one particular comptuer type or HDD type. I have two different Edge Series comptuers with standard HDD that are consistantly getting the 2100 Connection Error and Missing Operating System errors at bootup. Have to boot a couple of times to get the OS to load properly.

2 more replies
Relevance 57.81%
Relevance 57.81%

Motherboard: Asus P5N- MX motherboard; BIOS update 903
CPU: Intel Core 2 Duo E8400 Processor
OS: Windows XP

I was trying to install a new CPU and in the middle of that process, I found I needed to update the BIOS. Again this took some time to do but once it was updated, I saw this message:

"The system intruded, chassis opened, or tempered before. Please check the system."

I looked up the issue and did a series of things to mend it.

Checked the manual. According to it, there is no switch in the BIOS itself, only a physical set of pins which by default have a jumper cap over them to short the detector. Upon checking my MB, I found this jumper cap was missing, so I ordered a batch and replaced it. Problem continued.

Reset CMOS. I turned the PC off, removed the battery, then moved the jumper cap to clear CMOS according to the manual. Waited about a minute to be safe before returning the cap to its original position and putting the battery back in. Problem persists.

Updated BIOS again. I'd previously had issues updating the BIOS only to learn the file was not being detected was all. Once that was settled, it was updated and this new issue appeared. After calling ASUS, the rep suggested the first two options I mentioned as well as checking for an even more recent update to the BIOS. I had the most recent one, but I re-updated it anyway. Problem persists.

Check jumper caps. I thought maybe the cap was not secure enough for the short to be detected, so I checke... Read more

Answer:Solved: How do I get around chassis intrusion detection error?

8 more replies
Relevance 57.81%

First, please forgive me. I am a computer noob. I'm not very savvy with computers, so I might need "extra" help.

We have a shared family computer and today, all of a sudden, a window popped up and said something along the lines of, "Hard Drive Detection Error". My wife restarted the computer and everything on the desktop disappeared, none of the programs were in the Startup menu and we have no idea what happened and how to fix this. I've searched and found that others had similar experiences. I'm not sure if my hard drive really is out of commission or if we've contracted a virus.

I'm running Windows XP (sorry not sure which Service Pack). My hard drive is petitioned into 2 parts, Operating System is on the C:\ and everything else (music, games, pics, etc...) is on the E:\. It seems like everything still shows up on the E:\, that's why I believe I may have contracted a virus???

Can someone please help this noob out?

Thanks in advance!

Answer:Virus???: Hard Drive detection error

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

------------------------------------------------------

Your files aren't missing, they're hidden and the hard drive errors you see are fake.

Please download this file and run it.

If necessary, you can run it straight from a USB drive.

------------------------------------------------------

Download dds and save it to your desktop from here or here.
Double-click dds to run the tool.When done, DDS will open two (2) logs: DDS.txt
Attach.txt

Save both reports to your desktop.
-----------------------------------------------------

Please include the following logs in your thread:Contents of the DDS.txt posted as text in your reply.
Attach the Attach.txt to your post by clicking the Manage Attachments button under Additonal Options>Attach Files on the composition page. Browse to where you saved the file, and click Upload.
------------------------------------------------------

Download GMER Rootkit Scanner from here and Save it to your Desktop.Double-click gmer.exe to run it. If asked to allow gmer.sys driver to load, please consent .
If it gives you a warnin... Read more

17 more replies
Relevance 57.81%

Whenever I try to restart my ThinkPad T440s, it takes a very long time to get past the "ThinkPad" screen.  If I hard reboot it while it's stuck here (press and hold the power key, then turn it back on), it loads just fine.  However, if I let it keep going it beeps loudly and angrily and gives me the 2100: Detection error on HDDO (Main HDD) on a black screen with only "Press Esc to continue".  When I press Esc it loads the boot screen, but without access to my hard drive.  If I hard reboot it again, it starts just fine. Any ideas on why it would be doing this, or what I could do to fix it?  It looks like it was a common problem a few years ago, but this is new to me and it doesn't really look like there was a fix back then.  Hoping there's better news now? Any help is appreciated!

More replies
Relevance 57.81%

Hello,I have a Lenovo X1 Carbon 2nd Gen (Type 20A7) and after 14 months of use now, I got the error "2100 detection error on ssd0 (M.2)".I saw different topics about that kind of error and Lenovo really disappointed me -_- (they were different years I wasn't purchasing Lenovo anymore and this has been a sad welcome back).I saw some solutions about the Lenovo X1 Carbon 1st Gen, but I didn't find anything about how to fix it on the 2nd Gen. I read this https://support.lenovo.com/us/en/documents/ht082504 and I would like to know it there is a way to manually install that firmware without have access to the operating system. I was running Debian 8 on my laptop when that error occurred and I have bunch of important data that I need to recover!I know, it's bad not have a backup and I usually do it, but I never had any problem with any HDD/SSD on all the laptops I had (a lot) and being that an expensive laptop, I couldn't imagine that was gonna happen (and just after 14 months of use). I tried running a live GNU/Linux distro to check if it was able so see the SSD to make a backup, but nothing...I put the SSD in a SATA adapter, connected to different laptops running Windows 7, but nothing. I really hope the SSD is not dead at all. Anyone able to help me? Both about to fix that error and have my system back or recover my data from the SSD that is not recognized/seen on any system.Thanks! p.s: the SSD is a MZNTD512HAGL-000L1

Answer:X1 Carbon 2nd Gen - 2100 detection error on ssd0 (M.2)

Hi and welcome, X1CarbYuu've linked the proper page regarding issue.Another ones, with details (note, fw package has different file name, I can't confirm whether its content differs from the page in your post):http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x1-...There is readme file.I searched on the Samsung support site information about the recent fw available, but faced a bit difficulties.Regarding the fw update on the system w/o Windows installed I have the only suggestion to use bootable media like LiveUSB, Windows To Go, WinPE 5.0. Probably fw update tool will work.I'm worry you weren't able to connect SSD to the external laptop. I hope you didn't perform to boot that laptop from current Samsung SSD. Perhaps there was some incompatibility between BIOS, adapter, SSD fw, drivers.

8 more replies
Relevance 57.81%

My son is running a PC with XP pro. I ran AVG antivirus and it has detected 3 viruses in a zip file (count.jar-43c66fb6-14c3949a.zip) called BlackBox.class, Verifier.class, and Beyond.class. I tried to follow through on the AVG suggested removal which says if you haven't got Java plug-ins installed you can delete the appropriate file. When I do this it appears to prevent access to the internet. Any advice much appreciated.A bit of further info, on boot up it keeps generating a message that New hardware relating to an Ipod has been found, even though no such item (we don't have one) or infact anything is plugged into any of the ports.I am not sure if the Online gaming that appears to have installed itself in favourites(and cannot be deleted is any connection, it also appears to have installed a browser bar at the bottom of the screen which also I don't appear to be able to remove.

Answer:Virus Problems & Hardware detection error

Try downloading Winsock fix click here then remove the file, then run Winsock fix.Also scan with Ewido click here

7 more replies
Relevance 57.81%

Hi, I hope some one can help me. I have a P50  In thise I have the OS on a M2 disk. I have on other M2 disk both are working good. When I tryed to mount a 2.5" ssd Kongston 256 gb I got the message "2100: Detection error on HDD0 (Main HDD)"If I connect the disk to a ekstern reader I finde it but not when connected internaly in PC. BR 

More replies