Computer Support Forum

Ricoh PCIe SDXC/MMC Host Controller / Windows 8.1

Question: Ricoh PCIe SDXC/MMC Host Controller / Windows 8.1

Hi allMy T430s has a 04W3932 Ricoh Multi Card Reader. I have the "usual" problem that the card reader shows up in device manager, but an SD card that I insert is not seen. I have read all the threads on this subject I could find (quite a few) and manually installed this driver: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g1s902ww.exe The driver seems to install ok, but the problem persists.It is difficult for me to understand, why it should be so hard to publish a driver that works reliably and make this problem go away.I would appreciate a suggestion how to tackle thisThanks a lotRudi





T430s, 8Gb memory, 128Gb mSATA SSD, Win 10 Pro, 1TB HD, 1600x900

Relevance 100%
Preferred Solution: Ricoh PCIe SDXC/MMC Host Controller / Windows 8.1

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Ricoh PCIe SDXC/MMC Host Controller / Windows 8.1

Are you also running the latest BIOS?What type of SD card is it? SDHC, SDXC?Does installing the driver from this post help you?http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T430s-card-reader-cannot-read-16-GB-SDHC-ca...

4 more replies
Relevance 110.78%

I just bought a new SanDisk SDHC 32GB card but my card reader is not able to detect it, although it can detect SD card. Is there any update driver I need to download to solve this problem?

Answer:T420S with RICOH PCIe SDXC/MMC Host Controller can not detect SanDisk SDHC

Hi michael0130,thanks for posting and welcome to the community. I was just wondering which OS are you currently using?If your using Win7 or Win8 I would suggest you to update your BIOS First and then uninstall the card reader driver and reinstall it with the latest version below.BIOS (For Win7 or Win8 ONLY!)http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014992Card reader :(Win 7) : http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014960(Win 8) : http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032126Hope this helps and please do post back your results.Regards

1 more replies
Relevance 110.78%

I've T420s, Ricoh PICe SDXC/MMC Host Controller, and several SD cards. Right away I can say that the cards (Kingston, Samsung, Transcend) are all right, tried them on different computer and phone, they work well, so I assume this is not a card issue. I never used Card reader extensively, so I can't say if it started lately or was always like that, my T420s is about 1 year old and I'm running Windows 7 32bit. Here is the problem. Device seems to be switching on and off all the time when the card is inserted or taken out. I can say this as I'm keeping device manager window open. It seems like the connection between card reader and motherboard (?) is very bad, as I have to press on the device to pop out and press it back in to appear in the list of devices. When I plug in the card, it might actually show up, but then, when I pop out the card and pop it back it, it won't show again. So I have to take out the device itself again to have a chance of accessing my card. I've tried updating the driver from http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014960 But it  didn't help. I've seen this: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/SD-Card-reader-not-working-Code-22-ThinkPad... But even if the device appears under IDE ATA/ATAPI Controllers, there is no "Ricoh SD Disk Device" under "Disk Drives" most of the times when I insert cards. Anyone had similar issues?

Answer:Ricoh PCIe SDXC/MMC Host Controller is working porrly with cards, T420s

Hi, answer42
 
I would make sure that the BIOS is up to date. If the BIOS is not up to date, the motherboard may not be fully recognizing when a card is present in the port. The latest BIOS for your machine is 1.35, and you can find that here. So definitely make sure the BIOS is up to date and see if that helps the issue.
 
Hope it helps,
Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

4 more replies
Relevance 87%

please, i am looking for the driver ricoh pcie sd/mmc host controller to windows 7 32 bits. i have a sony vaio PCG-21212L.THANK YOU.

Answer:ricoh pcie sd/mmc host controller

If it's for the SD/MMC card-reader built into your Sony, you can download it from Sony's support website: Support for Sony product | Technical Support

The default country is UK, so if you live elsewhere choose the appropriate country by clicking the flag at top-left of the page.

1 more replies
Relevance 84.1%

I have a W510 and installed the LSC not long ago.  It reports that the Ricoh PCIe SD/MMC Host Controller is disabled, but the Device Manager says "This device is working properly."  Anyone else seen this and have a resolution (or than disabling the warning)? Thanks! Chris

Answer:Lenovo Solution Center & Ricoh PCIe SD/MMC Host Controller

Dear Chris, Welcome to the Community! Go to Settings, under Lenovo Solution Center configuration, you could uncheck Device Manager.
 
Hope this helps. 
Peter
W520 (4284-A99) | i9300 - CM11 / GoogyMax 2
Give kudos to reward people for their assistance | Mark the thread solved if the solution works | Direct e-mail regarding technical problems will be ignored
=====================================
Dolby ; IdeaPad Slate Tablet ; Equalizer APO 
 
 

4 more replies
Relevance 92.25%

My SD card slot does not work.
I am able to install this , and get an updated driver off windows update.
HOWEVER, in device manager, I see this message with a yellow "!"

This device is not working properly because Windows cannot load the drivers
required for this device. (Code 31)

Have carried out an sfx /scannow but no corrupted files are reported.
Any ideas how to fix this?


My computer's make is Advent and I cannot get any joy from anyone online regarding my problem. I have posted to the Advent's forum and again, no one seems to know or answer.
These are the details:
Advent fp9004
Windows 7 Home Premium 32bit.

If you can provide a link to a driver's update, will this install automatically after downloading, or do I need to force the installation and what is the recommended way?

I would be very grateful for any information.
Ton

Answer:Ricoh SD Host Controller

Hello & welcome to sevenforums,

If you get an updated driver from Windows Update it means its on your computer now, you could manually try to install the Ricoh driver from the Device Manager .


from the device manager right click, search manually on your computer the path.

Follow this tutorial:
Driver Install - Device Manager

You could try to locate the driver name in C:\Windows\System32\DriverStore\FileRepository



If not working...the only link i founded for ricoh drivers v6.0:
ftp://ftp.hp.com/pub/softpaq/sp37501-38000/sp37872.exe

Download the softpack sp37872 and extract it with 7-Zip for 32-bit Windows

Before:
Create yourself a restore point

Run the Setup.exe inside the extracted folder sp37872.

Note:
You can also manually install the driver from the Device Manager by pointing the search to look at the extracted softpack sp37872 if running the setup.exe doesn't work properly on your machine.

9 more replies
Relevance 91.43%

I have been having a problem with my built in Ricoh card reader for quite a while, originally while running Vista Ultimate x86 and now with Windows 7 Ultimate x64. I have an Asus G1s.
The problem is that it does not read SD cards, and when I insert an sd card the "Ricoh memory stick disk device" under disk drives in device manager changes to "Ricoh xd-Picture card disk device" and suffers from error 10 failing to start. It seems to me that the problem id that the card reader does not recognise the sd card and thinks it is an xd card.
Under "IDE ATA/ATAPI controllers" I jave three Ricoh devices
Ricoh memory stick controller Hardware id
PCI\VEN_1180&DEV_0592&SUBSYS_15D71043&REV_12
Ricoh SD/MMC Host controller HW id
PCI\VEN_1180&DEV_0843&SUBSYS_15D71043&REV_12
and Ricoh xd-picture card controller HW id
PCI\VEN_1180&DEV_0852&SUBSYS_15D71043&REV_12
Apart from that I have Ricoh 1394 OHCI compliant Host controller HW id
PCI\VEN_1180&DEV_0832&SUBSYS_15D71043&REV_05
and my standard sda controller HW id
PCI\VEN_1180&DEV_0822&SUBSYS_15D71043&REV_22
It seems like there is a problem either with the firewire host or the sd sdbus.sys host not recognising the card
I have fully updated all drivers and even tried to change the compatible hardware id in the sdbus.inf and reloading to match the sd host controller al to no avail.
I would very much appreciate any help as the usb card readers I buy are always ... Read more

More replies
Relevance 90.2%

PCI\VEN_1180&DEV_0576

Ricoh R5C576 SD Host Controller

Does anyone have a driver for Windows 7 Professional 32 Bit ???

TIA

Answer:Ricoh R5C576 SD Host Controller Driver ???

Hi ... The Driver required for that Device is the Card Reader .. What is the Model Number of your Computer ? ..

3 more replies
Relevance 84.87%

Hello Everyone, I was wondering if any of you has faced this before.I have an W520 - 4276 since almost one year which is running pretty well.A couple of days ago, an exclamation mark appeared on the SimpleTap Icon indicating I have a message.After starting SimpleTab, I noticed that the notification was coming from Lenovo Solution Center.In Lenovo Solution Center and under Check-Up -> Device Manager I was getting a message that the Ricoh 1394 ohci compliant host Controller is disabled. By checking the device Manager, the device Status was "Windows has stopped this device because it has reported Problems. (Code 43). After restarting the Computer the device was enabled again.. but the same is Happening almost every 2-3 days.. I hope someone can clarify this strange behavior..Regards, here are the screenshots, 













Solved!

Go to Solution.

Answer:Ricoh 1394 ohci compliant host controller reported as disabled in lenovo solution center

Spoiler (Highlight to read)I have the same message/alert.  Just showed up today (Aug 25 2013).  I have a Lenovo W530 and have had it since Feb 2013.I have the same message/alert.  Just showed up today (Aug 25 2013).  I have a Lenovo W530 and have had it since Feb 2013. 

5 more replies
Relevance 82.41%

WIN 7 Ultimate, 64 bit, ASUS M3A78-EM Motherboard.

I built my PC about 3-4 year ago using the above MB and OS and I am very happy with it.

I recently decided to install a 4 port, front, USB 3 hub.

The MB doesn't directly support USB 3 but does have a PCIe 2 slot.

I purchased from Scan a Lycom UB-115, 1x Ext' 1 x Int' 2 x port USB 3 PCIe card, this is a powered card as is the front hub which was puchased seperate to the card.

The multi software disk that came with the PCIe card is NEC.

Installing the front 4 port hub was a doodle, on restarting machine, new hardware was recognised and successfully installed and I know power is getting to hub.

I wasn't so lucky with the software, the NEC 64 bit software installs OK but the USB 3 host controller/driver is not found. If I look in device manger it is not there under Universal Serial Bus Controller, ( which is where I assume the USB 3 controller would show ) and there are no yellow warning triangles, Windows simply can't find the installed software/ host controller/driver.

I spoke to Scan who directed me to Lycom's driver download page, there is an update, so downloaded it, uninstalled previous version, installed update version, still no joy, nothing in device manger.

If I click start, all programs, I can see the software, if I click on the USB 3 Utility icon, a window pops us informing USB 3 Host Controller/Drive not found.

Can anyone help me to resolve this issue?

Answer:USB 3 PCIe card, NEC USB 3 host controller not found?

Anybody?

2 more replies
Relevance 69.29%

Hi, Just did a clean (well, Lenovo Restore clean) Win 7 Pro 64 bit install on my 2441 W530.  The issue is that the card reader doesn't seem to recognize cards.  The Driver is installed and claims to be "working properly".  But if I shove a card in the slot and have it click in, nothing happens.  No little "thudump" noise from the O/S, no recognition of the drive in Windows Explorer.  Any ideas? Thanks, J





Two W530s, i7-3820QM, 2.7Ghz, 500Gb Samsung 850 Pro, 1920x1080, nVidia K2000m/100m, Win 7 ProT510, M540, 2.53Ghz, 1Tb hybrid drive, Win 7 ProTwo T61ps, T9500/T9300, 2.6GHz, 8Gb RAM, 256Gb Samsung 840 Evo, 1900x1200, nVidia 256Mb FX 570m, Win 7 Pro/Ultimate

Answer:Ricoh PCIe SCXC/MMC card reader not recognizing cards...

Hello,
 
If you boot the W530 from a Linux Live CD and attempt to access an SD Card, is it then recognized?  If not, I would say that it is a hardware issue (perhaps the internal card reader apparatus is loose).
 
Regards,
 
Aryeh Goretsky
 

2 more replies
Relevance 68.06%

Hi,

I currently have Motherboard Asus P5B-Plus Vista edition which has
1 x PCI-E x16, 3 x PCI-E x1, 3 x PCI 2.2

I plan to build a data server with this motherboard and buy Promise Supertrak EX8350 which is PCI-E x4 Raid controller card.

My question is. Instead of buying a new motherboard that has PCI-E x4 slot.
Can I just install the PCI-E x4 Raid controller card into PCI-E x16 slot which is normally for video card? And Just buy a cheap regular PCI video card for PCI 2.2 slot?

Hopefully someone could help me with this and I thank you in advance.
NYSaint
 

Answer:PCIe x4 Raid controller card into PCIe x16 slot

The 4X card has the long edge connector for the socket I assume, then yes. I have a second x16/4 slot that, iirc, they say will work as a 4x slot. That said, do they make a PCIE x1 videocard for the short slot?
 

5 more replies
Relevance 67.65%

Hello : Since I updated to win 10 . in device manager I'm having a problem with my usb host controllers , looks like I need a update for win 10 .

Answer:renesas 3.0 host controller / hci compliant host controller needed .

Can you do option one of this tutorial,

System Information File - Create in Windows 10 - Windows 10 Forums

I see Renesas drivers for W7 for your board, have you tried those?

P8P67 | Motherboards | ASUS Global

2 more replies
Relevance 63.96%

ever since yesterday when i tried to install an online game called forsaken world and then decided to cancel it part way through because it took too long and froze my laptop to where i had to do a hard shut down to get it to restart. It has been running slow since then and I am getting a black screen after the main boot screen when i try to go into safe mode to fix any issues that says:
Intel UNDI, PXE -2.0(build 083)
 
For Atheros  PCIE controller v2.0.1.9 (12/15/09)
check cable connection
PXE-MOF: exiting Intel PXE rom
 no bootable device detected -- insert boot disk and press any key.
 
I am writing this from my XP desk top. Is it possible the network card or cable on the inside has become unplugged. if so how do i go about fixing this? A
also since this computer was bought from walmart there was not any disks that came with . so i cannot do a clean install of 7.  

Answer:atheros pcie controller in windows 7 laptop not working

before this happened i noticed the laptop was over heating and running slower than usual. it started up fine yesterday and earlier today but now it won't go past that screen. oh and my computer is a toshiba l655 s5146. with 4 gb ram and a 1.27 ghz processor.

2 more replies
Relevance 63.14%

My Sony VGN-NW320f using windows 7 Pro Ricoh memory stick controller keep giving me an error every time I try to install a new USB device like, USB INTERNET hub, black playbook, any usb phone cant connect to desktop software. In the divice manager it says driver cannot verify the Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52). is there a way to get this fix as Sony is not much of a help!!!

Answer:Sony Vio Ricoh memory stick controller error

Hi there

Sony eSupport - VGN-NW320F/B - Drivers & Software

or try

Sony eSupport - VGN-NW320F/B - Support

cheers
jimbo

2 more replies
Relevance 62.73%

Nowhere in the documentation, web site is any info about what kind of controller and hence what size SD cards this model is supporting.Even Lenovo tech support doesn't know that info!I am really hesitant to buy a SDXC card of +32GB only to find out it supports on SDHC cards, thus limited to 32GB... thanks for any useful info, Ralf

Answer:What kind of SD card controller is in a Lenovo IdeaPad 120S-11AIP? SDHC or SDXC compatible?

Hi ITWorxLA,
 
Welcome to the Community Forums.
 
As per system overview :
IO port: Memory card slot (SD/SDHC/SDXC/MMC)
 
Platform specification:
One microSD Card slot, supports up to 2TB
 
Usually there would be stickers on the box or laptop to indicate the format it also supports.
You can try to find/borrow  a spare 32GB SDXC to test first before purchase.
 
Hope this helps answer your query.
 
Regards

1 more replies
Relevance 61.91%

Hi all,
I would like to have both VGA (Embedded) and DVI-D (PCIe) active for some application to run, seem like monitor can't be detect when I enable Embedded Video Controller in BIOS.
We are running Windows 7 Pro 64bit, we need VGA for KVM and DVI-D to enable GPU for anti aliasing.
Best Regards

More replies
Relevance 61.91%

Hi all,
I would like to have both VGA (Embedded) and DVI-D (PCIe) active for some application to run, seem like monitor can't be detect when I enable Embedded Video Controller in BIOS.
We are running Windows 7 Pro 64bit, we need VGA for KVM and DVI-D to enable GPU for anti aliasing.
Best Regards

More replies
Relevance 61.09%

Folks,I have searched and searched but nothing works from the given driver updatesPls help

Answer:how to enable reading 4GB Ridata SDHC card on T61 7663-BC2 with Ricoh R5C476 controller

The Ricoh reader is very picky with the type of SDHC cards you use, apparently only cards from reputable brands i.e. Kingston are shown to work reliably in this card reader system for anything above 2 gig.

6 more replies
Relevance 60.27%

I've had a crazy time trying to find a driver the the Intel SD Host Controller (ACPI\VEN_8086&DEV_0F14 or ACPI\80860F14). I know I'm taking the hard route since I just installed Window Thin PC on my wife's Lenovo ideapad 100S, which normally comes installed with Windows 10 x64 on a Samsung eMMC, but Thin PC works great on her laptop with a m.2 SSD installed.

I already tried utilizing the most recent Atom embedded drivers for Windows 7 & modifying the INF strings to try to force it to work but that just gave a non-working host controller. It'd be great to have the Samsung eMMC drive show up but I keep hitting walls.
 

More replies
Relevance 59.04%

I did update to my Edge E420s from windows 7 to windows 10. After the update my laptop couldn't read 64Gb SD-card. The problem seems to be missing JMicron PCIe SD Host Controller -driver. I cannot find from Lenovo's pages. Same with JMicron. From where?

Answer:ThinkPad E420s Windows 10 update and SD host controller driver

 ThinkPad E420s isn't compatible with Windows 10 and isn't supported by Lenovo. https://support.lenovo.com/us/en/documents/ht103535#thinkpad

2 more replies
Relevance 58.22%

I upgraded from Windows 7 Ultimate 64 bit to Windows 8 Pro and am trying to get a Kodak i260 scanner running.  This device worked correctly using the driver supplied by Kodak on Windows 7.
The installation instructions includes :

Installation of Driver Files:


Double click the 1394 host controller device name. The controller properties window will openSelect the Driver tab. Click the Update Driver button

Select "Browse ..... software". Click NextSelect "Let me ..... computer". Click NextHighlight ?1394 OHCI Compliant Host Controller (Legacy)? in the driver list.  Click NextClose the installation finished window when it appearsClick the Driver Details button from the Properties windowVerify the files 1394bus.sys and ohci1394.sys are listedClose the properties and management windows.




My problem is with line c. ?1394 OHCI Compliant Host Controller (Legacy)? is not listed as a choice.
Is this driver still included in Windows 8 64 bit? Where can I obtain it?
TIA.Regards, Rob

Answer:Is 1394 OHCI Compliant Host Controller (legacy) included in Windows 8 Pro 64 bit?

I found the following which resolved the issue for me:
Solution
Caveat: As Windows8 automatically disables unsigned drivers upon reboot, you will need to go through the process of rebooting with unsigned drivers allowed, or your device will not work.
It would really be useful if someone could create a signed copy!!!
Maybe it will work for you too, but I take no responsibility if it borks your machine, increases global warming or causes some other unwanted side effect.

Regards, Rob

22 more replies
Relevance 58.22%

Hello friends,

I'm having problems trying to install Windows 7, hopefully you guys can help.

I own an HP Stream 13 like this one here: Amazon.com: HP Stream 13.3-Inch Laptop (Intel Celeron, 2 GB RAM, 32 GB SSD, Cobalt Blue) with Office 365 Personal for One Year: Computers & Accessories

It came with Windows 10 pre-installed. I get free access to Windows products via dreamspark through my school. I decided I wanted to download Windows 7. I got through the setup and ended up at the partition part where it says:
"Windows cannot be installed to this disk. Windows needs the driver for device [Intel SD Host Controller]. Click 'Load Driver' and load the required device driver."
I have tried downloading Intel's automatic driver detection utility thing, but that did not work.

I have also tried Shift+F10, diskpart, list disk, sel disk 0, clean. But it came with an error in the command prompt that says:
"Virtual Disk Service error:
Clean is not allowed on the disk containing the current boot,
system, pagefile, crashdump or hibernation volume."

I'm at a stump. Any help is greatly appreciated.

Answer:Unable to install Windows 7 [Intel SD Host Controller] driver needed?

Hi Uni,
W7 likes to be installed as No1, even on a virtual Drive.
Your best bet is to install 7 and make 10 the virtual,
BUT
if you only have 2gb Ram, then you'll have to use 32bit versions, or buy more Ram

The drivers should available via the HP website for that model

Roy

1 more replies
Relevance 57.81%

Hi,
I'm looking for driver for Intel SD Host Controller device, a part of Dell Inspiron 14 3452, for Windows 7 x64
Device ID: ACPI\VEN_8086&DEV_0F14 or ACPI\80860F14 as it appears in Windows 10 installed there now.
Hardware identifier apps detect that that's part of Braswell chipset.
 
Please help with finding the driver.
 
What I checked:
1. Intel and Dell driver download resources, including www.dell.com/.../advanced drivers for chipset, including extraction of drivers from all relevant driver packages.
2. Intel's and Dell's Update apps to find drivers.
3. Whatever Windows 7 installation app gets from the internet when pointed to go online at the start of Windows 7 installation, as there is an option to get drivers from internet at the beginning if Widows 7 installation is running from under Windows 10.
4. Alternative websites and forums for drivers.
5. Driver packages from other vendors for their laptops using likely the same hardware.
6. Drivers for Windows 10 and Windows 8.
7. Dell's support including phone based ones.
8. Intel community.
9. BIOS update - done, didn't help.
Nothing helped.
 
Details:
I can't get drivers for Windows 7 using Windows Update as now I have Windows 10 installed on that laptop. I can't use any kind of driver downloader app as now I have Windows 10 on a laptop I need drivers for, and that downloaders can get drivers only for OS version they are installed on. I need that driver to install Wi... Read more

More replies
Relevance 57.81%

Hello,

I have a Gigabyte EP43-UD3L motherboard on a Windows 7 Pro 64 bit system. I keep getting an admiration mark on my device manager screen saying that there is a problem with Host Controller compatible with OCHI1394, I tried reinstalling, deleting... everything but nothing works. Sometimes, randomly, the PC starts and everything seems to be fine, but 90% I keep getting this error message.

I downloaded the latest Realtek HD Audio drivers after deleting the installed driver, and then the error seems to be fine until I restart the computer again.

What could the problem be?
Thank you very much!

Answer:Host Controller compatible with OCHI1394, driver or device problem. Windows 7 64bit.

Run the Windows 7 upgrade advisor --> http://www.microsoft.com/windows/win...e-advisor.aspx

What FireWire devices do you have?

Regards. . .

jcgriff2

.

2 more replies
Relevance 57.4%

Hi,

Have difficulty to show my Toshiba V63700-A 500gb external HD plugged in the USB 2s of my motherboard.

Saw this below in Amazon (?9.99) but does not mention Win8 only w7, has anybody by chance used it in w8?

Also my mobo has 2 free PCIE slots, will I need anything else with them or just plug into them & + power cable?.

The seller did not answer my Q. .....thanx ......nick

".......eLifeStore? 4 Ports USB 3.0 PCIE PCI Express Card for PC with USB 3.0 Extension Cable (30CM), SuperSpeed 5.0Gbps, Support MS Microsoft Windows 98SE/ME/2000/XP/Server 2003/XP 64-bit/Vista /win 7....."


Home build, Asus P5K Premium WiFiiFi Intel,
Intel Core 2 Quad Pro Q6600 95W 2.4GHz, OCZ Vendetta Cpu Cooler,
2x2GB, 240-pin DIMM, DDR2 800 (400mhz) PC2-6400,
EVGA GeForce 9800 GTX KO 512MB GDDR3 (PCI-E),
Seagate Barraguda sata 500gb, TOSHIBA vb63700-A 500GB external HD,
Corsair TX750M Psu, X45, XPhome/Win8

Answer:Add a USB 3 PCIE controller

If you need more USB ports. Get a laptop cooler with a built in USB hub.

5 more replies
Relevance 57.4%

Hi,

Have difficulty to show my Toshiba V63700-A 500gb external HD plugged in the USB 2s of my motherboard.

Saw this below in Amazon (£9.99) but does not mention Win8 only w7, has anybody by chance used it in w8?

Also my mobo has 2 free PCIE slots, will I need anything else with them or just plug into them & + power cable?.

The seller did not answer my Q. .....thanx ......nick

".......eLifeStore® 4 Ports USB 3.0 PCIE PCI Express Card for PC with USB 3.0 Extension Cable (30CM), SuperSpeed 5.0Gbps, Support MS Microsoft Windows 98SE/ME/2000/XP/Server 2003/XP 64-bit/Vista /win 7....."


Home build, Asus P5K Premium WiFiiFi Intel,
Intel Core 2 Quad Pro Q6600 95W 2.4GHz, OCZ Vendetta Cpu Cooler,
2x2GB, 240-pin DIMM, DDR2 800 (400mhz) PC2-6400,
EVGA GeForce 9800 GTX KO 512MB GDDR3 (PCI-E),
Seagate Barraguda sata 500gb, TOSHIBA vb63700-A 500GB external HD,
Corsair TX750M Psu, X45, XPhome/Win8 ​
 

Answer:Add a USB 3 PCIE controller

That does say it's compatible with Windows 7. It's a PCI Express card which is different than a PCI slot. If you're not sure if you have a PCI Express slot can you post a pic of your motherboard?
 

3 more replies
Relevance 57.4%

Hello, I have a HP Pavilion HPE h8-1360t Desktop and I have been trying to install a Vantec 2-Port SATA II 300 PCIe Host Card with RAID. It uses a Silicon Image 3132 controller http://www.siliconimage.com/solutions/pc/host-controller/. The operating system is Windows 7 Professional Service Pack 1 64 bit. The computer does not recognize the card in any of the PCIe slots and it does not appear in the device manager. I cannot bring up the card's BIOS, either. I have started and restarted the computer with the card in and out of each of the slots and it is never recognized. Any ideas on how I can get the computer to recognise the card?Thanks!

Answer:PCIe SATA II Host Card with RAID not recognized

Enter the BIOS and see if it is recognized as being present. That is where you should begin. According to the information on Vantec's website you should see the SATA ports in the device manager after it is installed.  Best regards,erico

9 more replies
Relevance 56.99%

Hi all I'm trying to upgrade to Windows 8 but the assistant will not let me proceed because it is tell me to "manually uninstall" the "Intel USB 3.0 eXtensible Host Controller Driver". When I first ran the installer it listed two "Intel USB 3.0 eXtensible Host Controller Driver". One had the uninstall button which I ran just fine but after a restart the upgrade installer still complained about the one that needed manually uninstalling. I've made sure all the Intel USB devices were uninstalled in device manager. I've reinstalled the drivers then uninstalled again. I've even been through the registry which did have references to iusb* files in system32/drivers. The files referenced did not exist so I removed those registry keys but the upgrage installer still complains that I have to manually uninstall the Intel USB 3. I even disabled the USB3 mode in the bios but this had no affect. Does anyone know what I need to do to stop the Windows 8 upgrade process complaining about this driver? Thanks

Answer:Windows 8 upgrade problem - Intel USB 3.0 eXtensible Host Controller Driver manually uninstall

FYI I gave up in the end and just did a clean install of Windows 8.

1 more replies
Relevance 56.99%

What is the difference between these two
-Realtek 1x Gigabit LAN Controller
-Realtek PCIe GBE Family Controller

asus m5a88v-evo

Answer:Realtek 1xGigabit LAN Controller vs Realtek PCIe GBE Family Controller

That 1x you posted from the specs is actually 1 x,

Realtek?, 1 x Gigabit LAN Controller(s)

meaning that there is one controller on the motherboard. Some boards come with dual LAN controllers, hence why they mentioned it only having one. The second will be the name of the onboard LAN controller.

9 more replies
Relevance 56.17%

My laptop is missing a certificate: C:\Windows\system32\RtNicProp64.dll and I get an error for windows updates: Package ID: UnknownPath: UnknownError Code: 0x80070057Source: Command Line   

Answer:Realtek PCIe GBE Family Controller

See: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/404... and expand the "Driver-Network(4)" section, and pick the "Realtek PCIe GBE Family Controller Driver" software. 

1 more replies
Relevance 56.17%

the software is not working.

Answer:Realtek PCIe GBE Family Controller

Could you please provide a better description of the issue? Also, what notebook model are you referring to?The only thing that you need to do is to uninstall the driver software and then reinstall it. Have you done so yet?

3 more replies
Relevance 56.17%

i  have problem  for connected to internet,driver Realtek PCIe GBE Family Controller not working or PCI  hardware                    
PCI\VEN_10EC&DEV_8168&SUBSYS_2ABF103C&REV_06PCI\VEN_10EC&DEV_8168&SUBSYS_2ABF103CPCI\VEN_10EC&DEV_8168&CC_020000PCI\VEN_10EC&DEV_8168&CC_0200
any help please. 

Answer:Realtek PCIe GBE Family Controller

Hi, Please try:    http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64531.exe Regards.

1 more replies
Relevance 56.17%

How to change speed from 100 to 1000 ?

More replies
Relevance 56.17%

So, I've run into a little problem that has me stumped. I am building a machine for gaming. Here's what I have in it:

Asus M2N32-SLi Deluxe
AMD FX-62 @ 2.8GHz
4x 512Mb (2Gb total) Ultra DDR2 XL 800Mhz
nVidia 7950 GX2 (1Gb RAM)
Silicon Image 3132 HDD controller 1x PCI Express
2x WD 250Gb SATA, RAID 0

I put that SiI 3132 card in because of the nForce 590SLi MCP's incompatibility with those two HDDs (I've tried everything to make these drives work, and it won't even work with only one drive).

Now, everything works fine except for the video card. I can install Vista with no problems (both the 64 bit and 32 bit versions) but when I try running 3Dmark06 or CounterStrike or any 3d program (in 32 bit or 64 bit Vista), I get small artifacts on the load screen then the video driver crashes. Of course, Vista is nice and doesn't allow that to crash the entire system and just shuts down the game and reloads the video driver.

I did use an old school IDE HDD as a temporary fix before I got the 3132 controller and successfully ran 3Dmark and all kinds of games on the same vid card. I would hope this HDD controller is not the cause of all the trouble, but it wouldn't surprise me if it was :rolleyes: . I have all the new drivers from nVidia for both the chipset and the video card.

Anyone have any idea what it could be or any tips on what to do? I greatly appreciate any help in advance. Thanks guys!
 

Answer:PCIe Video Card and HDD Controller

read your own post, u said the answere, and stated how u fixed it. the controller is the problem.
 

1 more replies
Relevance 56.17%

Need to replace Realtek PCIe FE Family Controller on my Compaq CQ5715F with AMD Athlon II. FOXCONN mother board 2 AB7. However, I cannot connect to the internet where can I get a driver for a replacement?

Answer:Realtek PCIe FE Family Controller

Hi Welcome to Seven Forums .. The Driver you require is in the Link below ...
Software & driver downloads Compaq Presario CQ5715F Desktop PC | HP? Support

9 more replies
Relevance 56.17%

Can you tell me how to fix these Wired LANNot ConnectedRealtek PCIe FE Family Controller Wired LANNot ConnectedMicrosoft Wi-Fi Direct Virtual Adapter BluetoothNot ConnectBluetooth Device (Personal Area Network) #2

Answer:Realtek PCIe FE Family Controller

Hello llamedos, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.  I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number we can provide you with accurate information. How Do I Find My Model Number or Product Number?Which Windows operating system am I running?Is the Windows Version on My Computer 32-bit or 64-bit? Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!

4 more replies
Relevance 56.17%

So I want to use wakeup on lan. I have searched google for answers of how to do this. I have done the power options on the ethernet adapter in device manager and went into BIOS to allow WOL (I couldn't find the option). I am using this app called unified remote to wakeup my laptop but it hasn't worked. I think it maybe has to do with the ethernet adapter turning off during sleep. If this is the case then how do I keep the ethernet adapter from turning off during sleep?

Answer:WOL realtek pcie gbe family controller

I had to go back to the realtek website and install their drivers. This adds an option under advanced properties for the LAN adapter in device manager for "WOL from power off" (or something like that) that wasn't there with the Microsoft driver.

I think I had to extract the Realtek drivers, right click on the LAN adapter in device manager, update driver, choose from list of hardware, have disk -> select the .inf file, and manually install the driver that way, IIRC.

6 more replies
Relevance 56.17%

Hi, We have been trying to figure out how to hook up our TV with connection from our laptop to get to Hulu.com, Netflix.com etc.  Any suggestions?

More replies
Relevance 56.17%

Windows 10 Ethernet bug (Realtek PCIe GBE Family Controller) a known bug, my Notebook after some windows updates stop to work as described on the microsoft comunity....The network stops to work after few seconds after "Repair Procedure". Then runs, but the story repeats....http://answers.microsoft.com/en-us/windows/forum/windows_10-networking/windows-10-ethernet-bug-realt...HP HEELP ME!!

More replies
Relevance 56.17%

Hello guys
I was just wondering about this in the notification area
Is this ok, i was wondering what it meant by "realtek PCIe family fe controller Disconnected"
And does it need to be in the notification area...
Windows 7 home premium

More replies
Relevance 56.17%

This to use with Avid Media Composer 5.5.5 and possibly Adobe Premiere 5 on Win7 Pro. Also, does that long green plastic thing need to be reinserted before closing cover?  Or is that just used when transporting the workstation? Thanks for your help. Mike

Answer:z420 Which slot should I install Matrox MXO2 PCIE Host Adapt...

> z420 Which slot should I install Matrox MXO2 PCIE Host Adaptor? The general rule is "wherever it fits", but take a close look at the PCI-E slots on the motherboard, because the labelling could be '1X' or '4X' or '16X'.  Putting a '16X' adapter into a '4X' slot could inhibit its performance. > Also, does that long green plastic thing need to be reinserted before closing cover?  > Or is that just used when transporting the workstation? It helps push the add-in cards "tightly" down into the slots on the motherboard.   

2 more replies
Relevance 55.76%

my dell laptop is giving error Realtek PCIe GBE Family Controller Series v2.29 (06/30/09)PXE-E61: Media test failure, check cablePXE-M0F: Exiting PXE ROMdoen't work beyond that. i can access setup. it happened when i tired installing Samsung wireless A750 monitor. As soon as i ran setup driver and rebooted it gave me this error.

Answer:Realtek PCIe GBE Family Controller Series v2.29 (06/30/09)

Are you meaning to try and boot to a PXE server? Or are you just trying to boot into windows?If builders built buildings like programmers wrote programs, then the first woodpecker that came along would destroy civilization.

2 more replies
Relevance 55.76%

Hey, it's me Cris1

Today I need the best settings for Realtek PCIe GBE Family Controller so I can play online games with out lag , specifically I want speed.

Thanks!

Answer:Realtek PCIe GBE Family Controller {Best Settings},help.

Code:
:: Script that finds the enabled network adapter of a certain name and sets the default gateway or TCP/IP Parameters

@Echo Off
SETLOCAL EnableDelayedExpansion

set networkCardKey=HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e972-e325-11ce-bfc1-08002be10318}
set enabledKey=HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\
set interfaceKey=HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\

for /f "tokens=* skip=2" %%i in ('reg query "%networkCardKey%"') do (

set I=%%i

if "!I:~0,4!"=="HKEY" (
if not "!I:~-10!"=="Properties" (
for /f "tokens=3*" %%A in ('reg query "%%i" /v DriverDesc') do set name=%%A %%B
for /f "tokens=3" %%C in ('reg query "%%i" /v DeviceInstanceID') do set dev=%%C
for /f "tokens=3" %%D in ('reg query "%%i" /v NetCfgInstanceId') do set guid=%%D
for /f "tokens=3" %%E in ('reg query "%enabledKey%!dev!" /v ConfigFlags') do set flag=%%E
if "!flag!"=="0x0" (
set __adapter_!I:~-4!.name=!name!
set __adapter_!I:~-4!.guid=!guid!
)
)
)
)

set targetName=Realtek PCIe GBE Family Controller

set guid=
set testguid=

for /f "tokens=2* delims=.=" %%A in ('set __adapter_') do (
if "%%A"=="guid" (
set testguid=%%B
)
if "%%A"=="name&quo... Read more

3 more replies
Relevance 55.76%

PCI\VEN_10EC&DEV_8136&SUBSYS_1670103C&REV_05Need Realtek PCIe Family Controller actual driver.My sistems Windows 10 64x I have 9.1.401.2015













Solved!

View Solution.

Answer:Realtek PCIe Family controller driver

Hi: Try the driver directly from Realtek. 2nd one on the list. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false

5 more replies
Relevance 55.76%

My house got struck by lightning. I had all electricity protected but forgot to surge protect the DSL phone line. The phone line didn't get a direct hit but picked up some static and my modem was lost. Also, the ethernet plug on my OOMA phone system was lost along with the Realtek PCIe GBE Family Controller. It shows as not working. The rest of the computer seems fine. This is on an Asus motherboard.

Can I fix this by simply purchasing a replacement networking card and plugging it into one of the motherboard card slots? If it requires a special type, please let me know.

Thanks
 

Answer:Lightning fried PCIe GBI Family Controller. What now?

Depending on the model number of that ASUS motherboard and what type slots it has, you'll need to buy and install a PCI or PCI Express x1 ethernet card to replace the one that went bad.

http://www.newegg.com/Product/Produ...&percm=33-320-130:$$$$$$$;33-320-069R:$$$$$$$ (PCI)

http://www.newegg.com/Product/Produ...#&percm=33-114-095:$$$$$$$;33-114-081:$$$$$$$ (PCI Express x1)

Note: These are just examples of the different ones.

------------------------------------------------------------
 

1 more replies
Relevance 55.76%

Hello!
 
I have looked up some posts on the forum, and tried everything in the bios people are saying, but with no luck.
 
I changed from the original HDD to an SSD and reinstalled another windows. I changed from UEFI to Legacy support so I could boot from my USB flash.
 
And this message is coming up, every second time i rest
 
Link to image
 
Moderator note: images totalling more than 50k converted to links per forum rules:  Lenovo Community Participation Rules

Answer:Y510P Atheros PCIE Controller Looping

Good day and welcome to the community.
 
Look for a setting labeled "PXE Boot to LAN" in your BIOS. Try disabling it if it shows as enabled.
 
Regards.

7 more replies
Relevance 55.76%

There's a new update for my network adapter, but I'm having problems updating it. I downloaded the Win7 and WinServer 2008 R2 Driver 7.058 off RealTek's website and inside the 64b folder there is no setup or install. It only contains .dll and .sys.

How do I install this?
 

Answer:Solved: RealTek PCIe GBE Family Controller

You would use the "Update Driver" feature from Device Manager to update to this driver.

OR

Instead of downloading the ZIP/manual update version, you can download the Auto Installation version from the Realtek website: http://www.realtek.com.tw/downloads...d=5&Level=5&Conn=4&DownTypeID=3&GetDown=false
 

3 more replies
Relevance 55.76%

Hi guys!
As you know, M83 based on Q85 chipset without RAID support.
But RAID-1 is very needed for me now, so i decided to install pci-e raid controller.
I tried stlab a-410 controller (Silicon Image SIL3132) and..  nothing happens, system didn't  recognize it.
Then i tried this controller in edge-72 - same situation.
But in usual PC  this raid controller works fine (on asus mainboard).
So: is it possible to install any pci-e raid controllers in thinkcenter M83 ?  Any positive expirience?
Thanks in advance!
 
 
Mod:  edited Subject line to make it more search friendly













Solved!

Go to Solution.

Answer:M83, Q45 - installed Marvell PCIe RAID controller

Solution: controller on Marvell 88SE9230 works well,  supported raid 1,0,10 and bootable. 

2 more replies
Relevance 55.76%

On my HP Netbook which uses Windows 7 Starter 32-bit, I checked for downloads on 12/31/2015 and received this requested update: Realtek PCIe FE Family Controller. What was strange was the following message that was included: Update released in November 2014.

This did not make any sense that it showed up over a year later since I have been updating and using this netbook almost on a daily basis with WiFi as a necessity.

My WiFi is working perfectly, so why would i even want to mess around and have the weird problems that seem to happen to those who just download everything from Microsoft in blind faith?

Did anyone else receive this update at that time?

More replies
Relevance 55.76%

So I had this issue where my ethernet connection on my Lenovo B570 laptop keeps disconnecting about every couple of minutes and the link lights would turn off then it would reconnect. So I did the following:

visit Realtek and install the latest driver. (Might not be necessary but do it anyways)
open Network and Sharing Center, click on Manage adapter settings, right click Realtek PCIe GBE Family Controller (Local Area Connection) and select properties. Click on configure, switch to advanced tab and change the following properties:

Auto Disable Gigabit > Relink Battery or AC
Green Ethernet > Disable
Energy Efficient Ethernet > Disable

My ethernet connection has been stable so far.

Hope this helps anyone.

Answer:Realtek PCIe GBE Family Controller keeps disconnecting - my fix.

Thank You Very Much! Your manual really helped me!
I was dancing with a tambourine for 3 nights, before i found Your message.
I Must add that 1 step was made by myself: link speed/duplex settings were changed from Auto to 10 Mb, Full Duplex. And only after that link lights began to work....

7 more replies
Relevance 55.76%

My house got struck by lightning. I had all electricity protected but forgot to surge protect the DSL phone line. The phone line didn't get a direct hit but picked up some static and my modem was lost. Also, the ethernet plug on my OOMA phone system was lost along with the Realtek PCIe GBE Family Controller. It shows as not working. The rest of the computer seems fine. This is on an Asus motherboard.

Can I fix this by simply purchasing a replacement networking card and plugging it into one of the motherboard card slots? If it requires a special type, please let me know.

Thanks
 

Answer:Lightning fried PCIe GBI Family Controller. What now?

If your PC has an open PCI (or PCIe) slot, you should be able to install a replacement like this (if you have a "low profile" desktop unit, be sure to get one with the proper height backplane):

http://www.amazon.com/TRENDnet-32-B...=1400109089&sr=8-2&keywords=pci+ethernet+card

As for the OOMA box, DSL modem, etc. you'll have to test each one. If the DSL unit came from your ISP, you should call their customer support line to run a remote diagnostic test on it.
 

1 more replies
Relevance 54.94%

Hi ive been revieving some stutter noticibly when playing and form of video or audio and it has been getting worse as of late. Overall performance has dropped as well.

Ive tried using Latency Checker and Latencymon and Realtek Ethernet Diagnostics Utility to try and diagnose the problem and the closest thing ive come to is that it has something to do with 'Realtek PCIe GBE Family Controller' as when I disable it the stutter appears to vanish and latency readings drop however I need that to connect to the internet so keeping it removed is not really an option.

I have tried using a variety of drivers and methods from this forum and others and none have come to be of any use as of yet.

Here are my readings from Latency Checker and Latencymon:
http://i45.tinypic.com/alj8r8.jpg
http://i45.tinypic.com/14dhv6h.jpg

Thanks.

Answer:PC Stutter, Latency, Realtek PCIe GBE Family Controller

  
Quote: Originally Posted by Fiercy


Hi ive been revieving some stutter noticibly when playing and form of video or audio and it has been getting worse as of late. Overall performance has dropped as well.

Ive tried using Latency Checker and Latencymon and Realtek Ethernet Diagnostics Utility to try and diagnose the problem and the closest thing ive come to is that it has something to do with 'Realtek PCIe GBE Family Controller' as when I disable it the stutter appears to vanish and latency readings drop however I need that to connect to the internet so keeping it removed is not really an option.

I have tried using a variety of drivers and methods from this forum and others and none have come to be of any use as of yet.

Here are my readings from Latency Checker and Latencymon:
http://i45.tinypic.com/alj8r8.jpg
http://i45.tinypic.com/14dhv6h.jpg

Thanks.


Welcome to SevenForums,


Looks that your internet & network have to be improved...

Perhaps you could run an Elevated Command Prompt , type in the open command window: netsh int tcp show global

and post a screenshot

Some might be able to help you....

Meanwhile try to look at that SITE for some useful infos on Networking.
Be aware that any changes to the system could make unstable your machine & Network. (not all of the settings, down there have to be improved...!).

If you're unsure of what to do, please feel free to ask here.

You could also do a web search... Read more

2 more replies
Relevance 54.94%

hello I hope I can get some fresh ideas Ivetried alot of different things and nothing seems to be working.
first off this is a new fresh install of windows 8 i had to download and install 8.1 via updates. This computer is fully updated.

It is an older computer but I only use it for my TV to store Movie/Videos
ASUS M3A78-EM
AMD Phenom 8450 @ 2.1ghz
2gb gskill ram
blueray drive
3tb seagate
2tb wd
kingston 120gb SSD

after a fresh install everything worked fine until i tried to connect to my local network the onboard NIC has an error (code 10) it is a Realtek PCIe GBE Family NIC. after finding this i uninstalled and went to Realteks website and got the newest windows 8 64bit drivers. ran the install and it updated the drivers... but the device still cannot start so i uninstalled again and picked the drivers manually and that didn't change the issue either.

So i checked the back of the computer and noticed that non of the activity lights were lighting up on the NIC so i pulled the ram and battery AND power cord and let it sit. (ive delt with a similar issue before where a NIC would stay asleep and not wake up) after a wait i turned it back on and noticed that i had an orange light glowing again on the NIC.

After setting up the bios i booted back into windows only to see that as SOON as the driver were automatically installed the lights in the back go out and of course..... the device cannot start error.....

At this point I cant think of anything else to do. I do have a wi... Read more

Answer:Realtek PCIe GBE Network Controller Cannot start code 10

Welcome to the forum jonilink!

Have you tried going into Device Manager and selecting update the driver, then let me pick and go through the list? There may even be a generic Microsoft one that gets it working.

5 more replies
Relevance 54.94%

My computer works fine, im using HP windows 7. However, everytime i restart my PC, this annoying Realtek PCIe etc.. black screen appears. It takes a few mins to get done and PC restarts normally. How can i fix this? Thanks

Answer:Annoying Realtek PCIe FE Family Controller on startup

Hi Welcome to Seven Forums ... Boot into the BIOS and DISABLE boot from network ...

Set you HD to first Boot ...

1 more replies
Relevance 54.94%

if my laptop has problumme then what should i  do

More replies
Relevance 54.94%

I have tried downloading this new driver to my computer and it will not install onto my comuter for whatever reason. Is anyone having the same issue? My current driver is Realtek pcie Fe Family Controller.

Answer:upgrade driver to realtek pcie gbe family controller

In order to help you further, could you please provide us with more information about your computer? Please post the specific model number or the P/N (Product Number) for your computer. Instructions for finding your HP P/N are here. This will help us locate resources, drivers, and identify correct parts for your specific model.

8 more replies
Relevance 54.94%

I own a HP xw6600 workstation with two E5450 Xeon Quad Cores and 32 GB of - Quad Channel memory installed an one Samsung 850 Pro SSD as my main OS drive together with an WD Re 2 TB HDD. Investing in a original Adaptec or LSI SAS controller card is perhaps a bit too much for a almost 6 year old workstation. There for I am considering to buy a SATA III - PCIe controller card with two SATA connectors and two mSATA connectors instead.Has anyone here tried that before and if so how did that workout for you ?  

More replies
Relevance 54.94%

I am using a Realtek PCIe GBE Family Controller on my motherboard for ethernet, and it randomly, with no rhyme or reason, disconnects from the network, at least once every few hours. It works again when I disable and reenable it, but it's extremely aggravating whenever it happens. I've tried using multiple versions of the driver, and I have tried disabling any sort of "Green" and "Energy Efficient" features (including "Advanced EEE"). Nothing has changed what's going on. I'm currently running 10.16.323.2017, but I've also run 10.1.505.2015 and 9.1.406.2015 versions of the driver.

I've also unchecked "Allow the computer to turn off this device to save power."

More replies
Relevance 54.94%

On an HP Pavilion E9220Y.

Problem:
The gigabit ethernet card, Realtek PCIe GBE Family Controller, is not responsive after disabling then enabling the card, or after unplugging the ethernet cable then plugging it back in. However, from a cold boot the ethernet card works fine.

The card has the latest drivers.

Thankfully the wireless adapter is fully functional, but would love to get the ethernet card to function correctly too.

Any ideas?

Answer:Realtek PCIe GBE Family Controller - Strange Behavior

  
Quote: Originally Posted by ceryan


On an HP Pavilion E9220Y.

Problem:
The gigabit ethernet card, Realtek PCIe GBE Family Controller, is not responsive after disabling then enabling the card, or after unplugging the ethernet cable then plugging it back in. However, from a cold boot the ethernet card works fine.

The card has the latest drivers.

Thankfully the wireless adapter is fully functional, but would love to get the ethernet card to function correctly too.

Any ideas?


Have you tried re-installing the driver?

9 more replies
Relevance 54.94%

I have version 7.012.1218..2009 dated 12/09.  The new version is: 7.017.0304.2010 dated 3/2010. The download fails with the error code (-1)       Any ideas? Thanks, Bill

Answer:Unable to download Realtec PCie FE family controller???

Hi , you didnt say what model you have, but for S10-3 ...the prefered download for Ethernet is
Realtek 7.6.820.2009  ... and download page S10-3 Driver i could download and extract all driver ...
 
sincerely KalvinKlein

1 more replies
Relevance 54.94%

This is my first time building a computer and after i put all the parts together it worked fine my the only problem im facing right now is im not sure if my network card support wireless connection(Please read the attachment) if it can please teach me how to fix this problem. Sorry im a noob in computer science
Processor AMD FX (tm)-4100 quad - core processor
Network Card Realtek PCIe GBE Family Controller

[img]http://s10.**************/5byfgbm39/image.jpg[/img]
[img]http://s12.**************/qe31vy8qx/image.jpg[/img]

PS I am using a cable to get on the internet but its really slow, is there a way to make is faster

Answer:Realtek PCIe GBE Family Controller can not connect to wifi?

You need to get a usb or pci wireless card if you want to connect to wifi. The realtek gbe is a gigabit ethernet interface, so you have to plug a cable in to it to get internet or network access.

2 more replies
Relevance 54.94%

Hi there,

I missing my network adapters "Realtek PCIe GBE Family Controller" Version 7.46.610.2011 from my computer, windows 7 64 bit.

I have check the Realtek website for the drive but I can not find it there and I am out of my league in this area. I have write underneath the Realtek PCIe GBE Family Controller drivers info.

Realtek PCIe GBE Family Controller" Version 7.46.610.2011 info:

Realtek PCIe GBE Family Controller

Driver Provider: Realtek

Driver Date: 10/06/2011

Driver Version: 7.46.610.2011

Digital Signer: Microsoft Windows Harware Compatiblity Publisher

PCI\VEN_10EC&DEV_8168&SUBSYS_04B71028&REV_06
PCI\VEN_10EC&DEV_8168&SUBSYS_04B71028
PCI\VEN_10EC&DEV_8168&CC_020000
PCI\VEN_10EC&DEV_8168&CC_0200

I realize that I need to find the drivers for Microsoft Virtual WiFi Miniport Adapter #3

Microsoft Virtual WiFi Miniport Adapter #3

Driver Provider: Microsoft

Driver Date: 21/06/2006

Driver Version: 6.1.7600.16385

Digital Signer: Microsoft Windows

Hardware Ids
{5d624f94-8850-40c3-a3fa-a4fd2080baf3}\vwifimp


I'll appreciate a helpful hand, Please.

Thanks

Jb

Answer:Realtek PCIe GBE Family Controller driver missing

Hi Welcome to Seven Forums .. Can you Please Post your System Specs ..

The Link below will help you achieve this ...

System Info - See Your System Specs
Also can you run a System Scan to check for corrupt Files ..
SFC /SCANNOW Command - System File Checker

6 more replies
Relevance 54.94%

Everything working okay, then loaded in Zone Alarm and things still working good. When into System Configure and the picture says it all. How do I figure out how to get this back?



Second question is about my Realtek PCIe GBE Family Controller. Does anyone know what is the optimal settings are for this? An interesting thing happen to me last night. Tried to download a 235megb file. First tried it failed. Then I started looking around and noticed about Jumbo Frames. So I took it from disabled to 9kb MTU. Wow, blew it way with a down load speed I got. Then I turn it back to disabled and did speed test. Speed test showed 45-55 down and 4 up. Then I turned it back on and wow it peg the needed three times and the last speed it register was 65-70 down and about 12 up. So what is it that I did?

Thanks

Answer:system configure and Realtek PCIe GBE Family Controller

Hi mate.

Don't know about the first one, but for the second one, Jumbo frames are network-layer PDUs that have a size much larger than the typical 1500 byte Ethernet MTU size.
This means that if you enable Jumbo Frames, your device can transfer bigger packets.
This usually depends on your hardware support, e.g. do you have a router who supports Jumbo Frames (which you do), and also does your ISP supports Jumbo Frames (it should), but they usually don't enable it per end user.
I don't know your situation, but since you witnessed higher speed, you can use it if you like

But if ISP find out, and they will if you downloading like a maniac, they will investigate and disable it on their side so you won't be able to use it even though you would have it enabled on your side .

1 more replies
Relevance 54.94%

Dear Forum Users,I buyed a eSATA adapter card with a PCIe x1 interface. My ThinkCentre m90P (5472) has only a PCIe x16 slot. I can plugin the card into this slot, but it is not recognized of the BIOS or Windows 7 (x64).I just updated the BIOS to the latest version, without success. Does anyone know if it should work to run a PCIe x1 card in a x16 slot? ThanksITGuy22

More replies
Relevance 54.94%

I am experiencing this error and cannot seem to get it to go away. I began exploring what is happening because of such varied computer speeds. I am running a Dell 3847 with windows 10 and speeds vary from 4 to 50 mb but it's mostly it's usually somewhere between 20 to 40 mb. My computer connects via wifi. I have gone to the Dell site and looked for the upgraded driver and downloaded it but I am still getting this error. I have also went to the device manager, uninstalled and reinstalled the driver to no avail. I also tried a couple things I read online regarding power management and made sure Auto Disable Gigabit, Green Ethernet and Energy Efficient Ethernet were all disabled but none of this done anything to resolve the error. Also, right after the family controller error I am receiving this one as well but I assume is because of the said error:
The local adapter does not support an important Low Energy controller state to support peripheral mode. The minimum required supported state mask is 0x491f7fffff, got 0x1fffffff. Low Energy peripheral role functionality will not be available.

If anyone has a suggestion on what I could try next I would greatly appreciate it!!

More replies
Relevance 54.94%

Please help

I recently had problems with my local network connection. Sony tried to help me fix this problem by reinstalling the original driver- REDETH-00265707-0042.EXE, however, this did not work. I have lost the realtek PCIeGBE completly from my laptop. Since I have tried to have my laptop fully recovered to its original state twice, but it has not seemed to work. I have contacted Sony on five ocassions but they don't seem to know what is going on. Please help me!

By the way I do a recovery on my laptop I have a message that “the following program did not install completely: Ethernet Driver ( Realtek) “

Thanks
Thai

Answer:Missing Realtek PCIe GBE Family Controller Ver.7.48.823.2011

Have you tried updating the driver from Device Manager?
Network Adapters > Realtek >Update driver >Search automatically

9 more replies
Relevance 54.94%

Hi,
Recently I did a clean install of Windows 8 Pro on my Asus K53SV laptop, i did not notice this right away since my Wi-Fi is working with no flaws but when i try an Ethernet connection, it gives me an unidentified network and a limited connection.
Iv tried resetting the router, tried multiple drivers (ones from asus site and realtek site), connecting directly to the router and modem but they all seem to come out as a limited connection. I have also tried reset winsock entries and reset TCP/IP stack.
I don't want to do a clean install if its not gonna have a very high chance that it will fix this issue; I have a desktop that's connected via Ethernet and it has no problems getting connection. Are there any other ways I can fix this?

Thank you

Answer:Realtek PCIe GBE Family Controller - Limited connection?

Originally Posted by impulez


Hi,
Recently I did a clean install of Windows 8 Pro on my Asus K53SV laptop, i did not notice this right away since my Wi-Fi is working with no flaws but when i try an Ethernet connection, it gives me an unidentified network and a limited connection.
Iv tried resetting the router, tried multiple drivers (ones from asus site and realtek site), connecting directly to the router and modem but they all seem to come out as a limited connection. I have also tried reset winsock entries and reset TCP/IP stack.
I don't want to do a clean install if its not gonna have a very high chance that it will fix this issue; I have a desktop that's connected via Ethernet and it has no problems getting connection. Are there any other ways I can fix this?

Thank you



The Asus site doesn't show an updated LAN driver for Windows 8 yet.

Have you tried going directly to Realtek for the driver, it shows a driver for Realtek PCIe GBE Family Controller half way down the first page for Windows 8.

Site 1 is for the US mirror download site.

Second link is just front door.

Realtek

Realtek

5 more replies
Relevance 54.94%

HI all - I tried to search for an existing thread but....

I have TWO pcie NEC USB 3.0 host controller cards installed. Each card has two usb 3.0 ports.

Everything was fine until I installed the second card. Now I get a BSOD only when I shutdown, and it seems every time I shutdown. It boots fine.

Question: I know I have given very little detail but in general, is there any reason I should not be able to have two of these cards installed? The device mgr actually looks like 3 are installed (under USB Controllers).

Windows 7 (of course)
x58a-ud3r mobo
Any advice or suggestions greatly appreciated.

Eliot

Answer:Are TWO pcie NEC usb 3.0 controller cards causing BSOD at shutdown?

  
Quote: Originally Posted by wooleysdad


HI all - I tried to search for an existing thread but....

I have TWO pcie NEC USB 3.0 host controller cards installed. Each card has two usb 3.0 ports.

Everything was fine until I installed the second card. Now I get a BSOD only when I shutdown, and it seems every time I shutdown. It boots fine.

Question: I know I have given very little detail but in general, is there any reason I should not be able to have two of these cards installed? The device mgr actually looks like 3 are installed (under USB Controllers).

Windows 7 (of course)
x58a-ud3r mobo
Any advice or suggestions greatly appreciated.

Eliot


Hi Elliot and welcome
Without the DMP's there could be a million reasons. You should be able to have two or more but if the number of drivers/devices in device mgr is different than the correct number that in itself could be the problem...Try UN-installing the highest number device.

7 more replies
Relevance 54.94%

I downloaded windows8.1 now my internet only works wifi it does not pick the cable to my d-link dsl-2750u router so im trying to get it to work like before

Answer:realtek pcie gbe family controller {error code 35}

Probably the existing network driver is not compatible with Windows 8 - looking in Device Manager will confirm this so have a look.If it shows error for the network driver, you need to update it to a Windows 8 compatible one. Your laptop manufacturer has all the drivers on it's website. Just hope they support Windows 8 on your model, you are supposed to check that before upgrading the OS

3 more replies
Relevance 54.94%

I downloaded Driver_Win7_7049_11182011.zip, but there is no setupfile or an exe-file that can start the installation. What can I do to get it work? W7 64 bits.

Regards,
cfwold
 

Answer:Realtek PCIe GBE family controller, new driver, no exe-file

You need to unzip the file(s) first and then you will find the exe file. Windows (since XP) comes with a basic zip utility application. Right click on the zip file and select extract or extract all.
 

6 more replies
Relevance 54.94%

Hi,
Lately I keep getting this update automatically to download Realtek PCIe GBE Family Controller #2. I already have Intel(R) Gigabit CT Desktop Adapter installed with now problems. Do I need the Family Controller and what is the difference between the two. I'm not on wi fi ,home PC Windows 7,,, and is there some way to stop the automatic update for the GBE Family Controller.

Thank you,
 

Answer:Realtek Pcie Gbe Family Controller,downloading Automatically

You need to tell us what is trying to update it? Is it Windows Update and if so is it marked 'optional' or 'recommended' or 'important'?
If it is not WU trying to update it, what program is doing that?
Also say what the MAKE and MODEL of your system is.
 

12 more replies
Relevance 54.94%

My older desktop is disconnecting from its wired connection ever since upgrading to Windows 10. Has to be the driver but I can't find a newer one to use.  Any help?Realtek PCIe GBE Family ControllerCurrently has 9.1.404.2015Desktop is model p6608f

Answer:Need Updated Driver For Realtek PCIe GBE Family Controller

The Windows 10 driver is listed at the top tier, version 10.012http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy...

1 more replies
Relevance 54.94%

Can someone plz help me fix it because when I click on the properties it says it cannot start so my modem's ethernet line does not even light up. Someone please help I have spent 3hrs trying to fix this and my phone is running out of batteries trying to search for help. Thanks for reading.

Answer:realtek pcIe FE family controller wont start

Hi and welcome to TSF what is the make and model of the computer or the make and model of the motherboard

1 more replies
Relevance 54.94%

Hello. I am trying to figure out which driver is the correct one to download and install to update my Realtek PCIe GBE Family Controller. The version I have is 6.223.525.2009 and I know theres been a version 6.225.0703.2009 released but I have been unable to find it. Looking at the available drivers on Realteks site, I was unable to determine which would be the correct download. If someone here could help me with this issue I would greatly appreciate it.

Thank You
John

Answer:Need Updated Driver For Realtek PCIe GBE Family Controller

Most of the times I've downloaded a driver from their site it doesn't work.I'd go to your PC manufacturer's website.

2 more replies
Relevance 54.94%

I can no longer access the internet if the ethernet cable is plugged in.

More replies
Relevance 54.94%

Right so I'm sure that many people have a realtek ethernet card. What would be the optimal performance settings for it in the advanced tab? I'm using a desktop & connect straight from a ethernet cable.

I'm not sure if this has been discussed in detail about what settings to pick for each option but hopefully this thread can go that route

Answer:Realtek PCIe GBE Family Controller - Optimal Settings?

i usually run with speed and duplex set to full and 100 or 1000 if you have that option and check the speed on speedtest. Then i switch it back to auto and see if there is much of a difference.

1 more replies
Relevance 54.94%

My Realtek PCIe GBE Family Network Controller driver has very slow download speed. At first I would uninstall it and restart my computer, then the speed would go back to normal. However, after a while, the download speed would go below 10Mbps, until I would have to uninstall the driver and restart over again. I have already updated the drivers and tested postiive with other laptops. How do I fix this issue?

Answer:Realtek PCIe GBE Family Network Controller Driver ...

gexcen,
 
Which model notebook are you referring to so we can try to help narrow this down?

1 more replies
Relevance 54.94%

I recently upgraded my HP p6608f desktop to Windows 10.  I am having some issue that have pointed to the Ethernet adapter.  In Device Manager it is identified as Realtek PCIe GBE Family Controller.  I would like to download the latest driver for it.  HP does not support my computer for Windows 10 therefore I would go to Realtek for the driver.  http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy...On the Realtek site they list identifiers for the controller such as RTLxxxxx.  How do I know which controller mine is so I can get the correct driver?  I will mention that on another computer I also have a Realtek PCIe GBE Family Controller and it has driver v. 10.1.505.2015 which seems different than what is shown on the Realtek site.











Solved!
View Solution.

Answer:Realtek PCIe GBE Family Controller driver needed

Hi: You would use the W10 auto installation driver from this set of ethernet controllers, as the motherboard specs for your PC indicate is comes with the Realtek RTL8111DL 10/100/1000 Mbps ethernet adapter. You can see that adapter listed at the top of the webpage...RTL8111C/RTL8111CP/RTL8111D(L) http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

4 more replies
Relevance 54.94%

if my laptop has problumme then what should i  do

More replies
Relevance 54.53%

hi i'm using genune windows 10 home(not pirated version)
my default version of realtek pcie gbe family controller is 9.1.401.2015 .,i upgraded it to 10.8.311.2016 awhile ago after that i can't use lan on my laptop, when i rollback to my default version, it is fine again. can anyone tell me what is the problem??

Answer:realtek pcie gbe family controller win10 can't connect after upgrade

Looks like a driver issue. I suggest you download the latest driver version from the website of your mainboard manufacturer.

4 more replies
Relevance 54.53%

hi i'm using genune windows 10 home(not pirated version)
my default version of realtek pcie gbe family controller is 9.1.401.2015 .,i upgraded it to 10.8.311.2016 awhile ago after that i can't use lan on my laptop, when i rollback to my default version, it is fine again. can anyone tell me what is the problem??

More replies
Relevance 54.53%

Windows 7 x64 with sabertooth 990fx with built in network in motherboard being realtek pci gbe family controller. Computer shows as connected to internet. Chrome or internet explorer says unable to connect, or unable to display. trouble shoot says unable to detect any problems. Tried re-install drivers. Since this computer belongs to a curious 11 year old boy, checked realtek settings to my computer. Still not work. There was settings different. tried device manager uninstall and re-install. not fix. in network and sharing, under connections, did disable and enable.

When i did cmd ping, i get 4 packets sent and 4 received. So internet seems to be working.

How fix this problem? Do I need reset to factory the network, if so, how? Or is there a problem with motherboard? or is it something in windows 7. Please help.

Answer:realtek pcie gbe family controller - network connectivity problems

The first thing I do with such problems is open Control Pane, Internet Options then click the Connections tab followed by LAN settings. Usually, unless specified by an ISP, only the first choice about Automatically detect should be checked, none of the others.

2 more replies
Relevance 54.53%

Hi!  I've tried for some time now and can't get my Windows 8.1 Pro Acer Aspire One725-0687 PCIe FE Family Controller to run at 100mbps.  My old Windows 7 Aspire One722 runs at 100mbps just fine!  I just got the Inventec PCIe FE Family Controller upgrade and that didn't fix it.  Any ideas?

Answer:Acer Aspire One725-0687 PCIe FE Family Controller ...

Drivers are updated?have you tried to change the ethernet cable?what's the top speed of router/modem? check also on device manager, speed settings:press windows key logo + xclick on device managerclick on network adaptersdouble click on your ethernet adapterclick on advanced tabcheck if Speed&duplex is available on the listif so, click on it and set it to the top speedclick ok

9 more replies
Relevance 54.53%

I purchase several new Edge E545 laptops as an upgrade for a client.  I need to run Win7-64 on them so I cleared the harddrive, configured the BIOS for Win7 install and proceeded on.  Install went off without a hitch.  I began to run all the driver installers for the various components.  No problem.  Ran Windows Update.  Installed all new patches, etc up to current data (1/8/2014).  Problem.  The Gigabit network interface won't work.  Install/uninstall the driver both from Lenovo and Realtek.  Doesn't work.  Enable/disable the device.  Doesn't work.  BIOS is at 1.10 while the version available at the Lenovo Support site is only 1.09 so the BIOS is pretty up to date.  Turned UEFI to "Both" and "Legacy Only".  Doesn't work.  Device Manager reports "This device cannot start.  Code 10" no matter what I do.  NOT having a working LAN is NOT an option as the client often goes to sites where Wi-Fi is not available.













Solved!

Go to Solution.

Answer:Realtek PCIe GBE Family Controller Network Adapter Code 10

Hi,
 
Welcome to Lenovo Community Forums!
 
I?m sorry to hear that you are getting Code 10 error in device manager of your Lenovo ThinkPad Edge E545.
 
Code 10 is a default error code that Device Manager generates when the operating system cannot determine which specific error code to return after an issue occurs. The problem can range from hardware failure to software config.
 
Check under BIOS if you have enabled the device.
 
Refer this Microsoft article for further info on code 10 error.
 
Hope this helps!
 
Best regards,
Mithun.





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 54.53%

I have a Lenovo K450 desktop computer and it is less then a week old and my Realtek PCIe GBE family Controller has stopped working.  I uninstalled it and reinstalled it.  I downloaded the new driver from Realtek and I also used the driver on Lenovo's site and it is still not working.  Do I need to get a new Motherboard?  

Answer:Lenovo K 450 realtek pcie gbe family controller error code 10

Hi gmacked,Yes this would seem like a hardware failure and would require service.Only faster option would be to get a cheap Ethernet card to put in it.

1 more replies
Relevance 54.53%

Here's a weird one - I have an Asus M5A97 LE R2.0 with an onboard Realtek Ethernet interface. If I load the latest driver (8.3.730.2012) it runs at 7Mbps - which is about as good as I get from my ADSL link. If I then reboot the system, it drops to 1.36 Mbps and stays there until I reload the driver. Clearly, the driver reload is kicking something on to allow the Realtek chip to run right. Any ideas? - I have tried going back to an earlier driver but get the same result.

Answer:Realtek PCIe GBE Family Controller runs slow after reboot

Seems to be an 8111f- related issue. I popped an RTL8187 WiFi dongle in one of the USB 3.0 slots and it works fine (although even that ran slow in a USB2.0 slot)... Trouble is, it is impossible to get an Ethernet driver that is not a Realtek without spending a small fortune.

2 more replies
Relevance 54.12%

Operating System: Vista SP2

Hello,

My computer has the Realtek PCIe GBE Family Controller for Networking, and I also have Verizon's router, the Westell Versalink 327w router.

My computer and this router seem to not like each other and have serious incompatibility problems. My computer will work with every other router that I've tried with no issues, but not with the Westell Versalink 327w router.

In addition, I know it's not the router's fault, as the router is able to connect to other PCs and laptops with no problem.

But my computer and this router seem to have some serious rivalry with each other. Here's the issue:

First off, the router seems to have a difficult time locating the PC... as if it has no connection, and vise versa. I have to switch the power to the router on and off repeatedly until I can establish a working link.

Even then, it's not stable. Sometimes I'll get it to the point where it will work for a long time, until I power down the computer, then it has issues again.

Lately, ever since my last shut down, I'm able to connect for brief periods of time, usually anywhere from 30 seconds to 4 minutes, then the router decides to ignore the PC again, or vise versa.

I've updated the router to it's latest firmware version, and the Realtek adapter to it's latest driver version (from the official website) and still, I have problems.

I've tried various Ethernet cables, and they make no difference.

I ... Read more

Answer:Westell Versalink 327W & Realtek PCIe GBE Family Controller Disconnects

6 more replies
Relevance 53.3%

Prior to getting this screen on start up, the computer has been experiencing random shut downs.
I recieve a screen that displays the message:
Intel UNDI, PXE-2.1 (build 083)Copyright (C) 1997-2000 Intel CorporationThis Product is covered by one or more of the following patents:US5, 307, 459, US5, 434, 872, US5, 732, 094, US6, 570, 884, US6, 115, 776 and US6, 327, 625Realtek PCIe FE Family Controller Series v1.19 (08/10/09)
and it will not boot pass that.
I check the boot settings and yes my HDD is first to boot. 
 

Answer:Dell Inspiron N5010- Stuck at Realtek PCIe Family Controller Series v1.19(08/10/09)

Hi,
Welcome to the Community. Will it allow you to press F2 key at the Dell Logo to boot into the Bios to check if the hard drive is getting detected? 
If it allows you, press the F12 key at the Dell Logo, select Diagnostics and run an extended diagnostics on your computer. Post back with any error codes.
Thank you.

4 more replies
Relevance 52.89%

I have a Mesh PC with Windows XP loaded. I have a Belkin 4 Port Hub 1 and have now plugged in a USB 2.0 Card Reader and have received the message that I need HI-SPEED USB Host Controller. As a beginner I do not know how to get this and does this upgrade my pc to 2.0. Can anyone tell me what I need to do?

Answer:USB Host Controller

From what you have said, is that your PC is USB 1.1 compliant and you have a USB 2.0 card reader.You can install a PCI USB 2.0 card, and this will enable you to run your USB card reader in USB 2.0 mode.You can get oneclick here for about £30or type usb 2.0 into google You must have a spare PCI slot free on your motherboard.

2 more replies
Relevance 52.89%

i have pentium4 2.4ghzcpu,intel 845gvsr motherboard,128mb ram,samsung 40 gb hdd.i have xp os installed.whenever i start pc a message appears,"new hardware found"usb host controller,though i insert motherboard cd it does not installs hardware,what should i do?
 

Answer:usb host controller

windows has detected new hardware .. it will install the drivers for it if it can otherwise it will ask for a cd .. you can also check out windowsupdate.com
cheers
 

2 more replies