Computer Support Forum

Gobi 5000 card GPS doesn't work.

Question: Gobi 5000 card GPS doesn't work.

I cannot find a GPS signal with a Gobi 5000 card, although the Gobi website plainly says the card it supposed to broadcast a GPS signal. Can anyone tell me how to do this? My software (Delorme Street Atlas USA and Microsoft Streets and Trips) each say there is no GPS device,. The software definitely finds a USB GPS device, but not the built-in Gobi GPS. The Gobi 4000 software came with GPB enabler software, but I cannot find similar software for the Gobi 5000.

Relevance 100%
Preferred Solution: Gobi 5000 card GPS doesn't work.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Gobi 5000 card GPS doesn't work.

I have the identical problem. Lenovo tech support has no idea what to ay about it. It has been suggested that my WWAN card needs to be activated with my wireless provider in case that "turns on" the GPS, but that strikes me as patently ridiculous. I have reference in Device Mgr to a Sierra Wireless Location Sensor, but it is not associated with a COM port, and no software seems able to find it. This is profoundly annoying.

3 more replies
Relevance 83.64%

Hi all, I have problem with activating Verizon boardband service on my X1 laptop after it is back from the warranty service (bad mother board, my laptop has been working find with Verizon broadband service for 9 months before the motherboard died). I made the research and found this http://support.lenovo.com/en/documents/ht082428 This is the same issue happened on the same model of my laptop, same model of my built-in air card.The only difference is it was the windows 7 and mine is windows 8.1 Unfortunately, the solution on that article does not work for my case. I contacted Lenovo and wait for the level 2 tech support to contact back to me my case number is 302MRJ8. If anyone has any input please feel free to join in. ThanksSteve 

More replies
Relevance 76.26%

Hello all, I would like to know if anyone has tried ( without hacking the bios or anything like that ) any of the other 3G modems for the lenovo S10-3t - ad does anyone know where I can purchase the " approved " 3G modems that will work ? I have done a search and can't find anything solid - I actually purchased a Qualcomm GOBI from CDW the exact same one they offer on the Lenovo site and the exact one mentioned here in these forums - and I get the unauthorized card error ! I called Lenovo for support and the gentlemen I worked with had no clue what to do quite frankly was really no help at all - I was even deferred to Quallcomm to their tech support and they pretty much said its Lenovos problem - so here I am with a 3G modem that doesn't work and before I purchase another one I want to ensure it definitely works - Any ideas ? Thanks 

Answer:S10-3T Approved 3G modems ?QualComm GOBI doesn't work

It might be the same GOBI model but different Vendor ID and Product ID. I've personally seen the VID/PID of the Ericsson and Huawei modems posted in the other thread so it's safe to say that they will work with the S10-3T. However, finding where to buy those exact modems can be a problem. I would guess it will only be available at the Lenovo site soon.

2 more replies
Relevance 73.39%

Where can I buy a unlocked GOBI 5000? The only ones I see on Lenovo.com is $200 for either the Verizon or AT&T brands.. I need one that works with T-mobile

Answer:Where to buy a unlocked GOBI 5000?

What region and network are you planing to use internet in? T-Mobile operates in 3 LTE frequency bands in the US - B2, B4, B12 (for B12 the company planned to start operating just in July 2014) and 3 bands in the EU - B3, B7, B20, in depends of the region and license type. But Gobi 5000 (Sierra Wireless em7355) supports only 2 bands of 6 above - B2 and B4.At the same time Sierra Wireless em7345 LTE card (another one card for the new line Lenovo notebooks) supports 5 bands of 6 above, except of B12. So, there are no advantages for em7355 if you are not planning to work in Sprint LTE network and 3g CDMA/EV-DO networks of US carriers.Supported frequency bands isn't a "locking" feature. It's a design, the set of components, filters. Purchase the card you need on shop.lenovo or altarnate resources.

1 more replies
Relevance 72.57%

Hi, There are two antenna wires in T440P, but three connectors on the card:1. MAIN2. GPS3. AUX It is clear that one wire goes to MAIN, but where goes the secondwire?As per installation diagramme you can do both???But what is the difference?thnaks for support !













Solved!

Go to Solution.

Answer:Gobi 5000 EM7355 installation

HiPlug the red antenna cable into the jack labeled MAIN on the card, and the blue cable into the jack labeled AUX. Jack labeled GPS is for the active (!) GPS antenna, laptop hasn't it. That jack might have a voltage (depending on the internal settings), so If you'll connect any regular antenna cable, modem will be broken because of short circuit.Let me ask you: is you location Georgia in the reality? Where are you planing to use em7355 and what types of networks?

7 more replies
Relevance 72.57%

Anyone know how I can get the verizon gobi 5000 to work with my T431s on windows 7.  For some reason there is no driver for the gobi 5000 that I can find and the lenovo mobile broadband activiation software only supports AT&T.   I'm at a loss. Waited 2 months to get the gobi 5000 only to realize that the model it was built for (T431s) is not currently compatible. Would appreciate any help!

Answer:T431s and GOBI 5000 - THERE IS NO DRIVER!!

HAS NO ONE OUT THERE RUN INTO THIS ISSUE????

5 more replies
Relevance 72.57%

Has anyone been succesfull in getting this to work, I've got 15 laptops not one of which is working with the Gobi 5000 and Verizon.   If you have been succesful are you using Verizon Access Manager or Lenovo Access Connections?  How did you go about getting it to connect.  The furthest I've got with all my monkeying around is for Lenovo Access Connections to show Verizon but not be able to connect. Verizon's site mentions nothing of the Gobi 5000 and Lenovo's drivers dont' work,  downloading the Sierra drivers from Sierra allows the device to show in Access Connections but is still not usable.

More replies
Relevance 72.16%

Microsoft 5000 mouse worked fine for a month, now doesn't. Inspiron 1520, Vista Home Premium 32bit. Changed batteries. Plugged dongle in to different USB ports: get message: USB device not recognized, USB device has malfunctioned. Uninstalled drivers, reinstalled; device manager says device is working properly. Disabled, enabled. Downloaded driver IntelliPoint 8.2 32-bit for Windows Vista (EXE) from http://www.microsoft.com/hardware/en-us/d/wireless-mouse-5000: it crashes, computer crashes, never quite gets to the end. Once this morning I replugged dongle in and got "installing hardware...your device is ready to use"...and it worked for 2 minutes then stopped again and "USB device not recognized." Very frustrating. Not a bluetooth issue, right? since it's got a USB dongle...thanks for any suggestions. Can't think of anything else to try.
 

Answer:Microsoft 5000 Mouse doesn't work

My suspicion is either the mouse or USB dongle has gone bad.

If it's still under warranty (I think Microsoft has a 3 year warranty), I'd go to the Microsoft website and check out your RMA options.

Hope this helps.
 

2 more replies
Relevance 71.75%

Good morning all. I recently installed a GOBI 5000 WWAN card for AT&T into my new Thinkpad T440p. I downloaded the driver package from the appropriate Windows 8.1 matrix and the computer crashed (blue screen DRIVER_POWER_SAVE) and then restarted. The driver appears to have been installed, as the device manager shows the following entry under networking adapters: Sierra Wireless EM7355 Qualcomm GOBI 4G/LTE/HSPA+/EVDO Also, under the networking portion of the Metro style settings page, the AT&T Broadband modem shows up, and with information regarding the IMEI, IMSI, which I forwarded to AT&T, so as far as they are concered my preexisting Data plan is current with the modem's IMEI number.. Still no luck with connecting. There was mention of Lenovo Broadband Mobile Activation Utility which I found elsewhere on Lenovo's but upon lauching the installer, it says that the current card is not supported. Overall, not sure what to do to get this thing connected to Mobile Broadband, also not sure if incomplete driver installation could be the culprit. I am going to call Lenovo support to see what they can do, will update here.

Answer:T440p WWAN connection GOBI 5000

Just got off with Lenovo Tech Support. They mentioned that theThinkPad GOBI 5000 Mobile Broadband - AT&T GOBI 5000 WWAN card, Part number: 0C52886 using Sierra Wireless EM7355 - GOBI 5000 software (ghwp14ww.exe), version 3.4.1308.3909 as of 13 DEC 2013 may not be compatible with Windows 8.1 which is what I am running currently. I will check on when the updated driver package appears with compatibility for Windows 8.1 and post here, they mentioned that it should be pushed via Lenovo System Update, so I guess I will stay tuned.

1 more replies
Relevance 71.75%

Will the new AT&T Gobi 5000 work with the T530?  Not that it should matter but the innards include an i7-3520M, 16GB 1600MHz, and a 256GB 840 Pro.  I'd opt for the 5000 rather than the 4000 if I knew it was compatible.  Any advice?





W530 | 3840QM | 32g @ 1.35v CL9 1986z | 512g 840 Pro | 1t HGST 7200 | FHD AUO v.4 | Quadro K2k | GOBI 5k | Centrino 6300

More replies
Relevance 71.75%

Hi, my company purchased x240s and the GOBI cards separately and of course they purchased the AT&T version and we use Verizon as our carrier.Now here is the thing, even with that branding from the tech specs on the Lenovo shop portal they look exactly the same. When I install the latest drivers for the GOBI card and Lenovo Access Connections I can get it to somewhat work in the beginning and then it stops working. I tried every conceivable way to get it to work all the time but it's a hit or miss until it permanently fails and the sim I use is from an x230 that also has a GOBI card. My question is does it really make a difference if it is branded as AT&T since the GOBI card does work at some point and if it doesn't matter am I doing something wrong?Thanks for any help!

More replies
Relevance 71.34%

I have a Dell Inspiron 17 5000 series with a lcd touchscreen. I turned it on last week and the screen was white. So I shut it down and next time I used it the screen will not turn on.
I tried hooking the laptop to my TV with an HDMI and it works. The touch screen will work too. But when I take the HDMI cable out the computer screen is completely black. I've read and heard an inverter could be the problem but I'm not 100% positive and don't know where to purchase a part to fix this issue. Any suggestions help!
Thanks!

More replies
Relevance 70.93%

Has anyone got this card successfully working with Verizon?? SIM is in place and ready for activation with Verizon. When I try to use the Lenovo Mobile Broadband Activation tool the only options listed are ATT and Other. The other option just says to call your provider. This tool worked for us previously with the x230 and there was always a Verizon activation option. Any help much appreciated!

Answer:Verizon Activation x240 Gobi 5000 EM7355

Lenovo is aware of this issue but they don't have a solution yet. We have been dealing with this problem FOR MONTHS with both Verizon and Lenovo pointing fingers at each other. Until Lenovo fixes the problem, I would advise anyone who intends to use the Gobi 5000 card with Verizon to stay away. There are obviously problems that were not caught in QA that have lingered where our support requests were swept under the rug not acknowledging any problems. For the price you pay for these laptops, you would expect them to be working out of the gate. The X240, T440s/T440 and any laptops that use the Gobi 5000 are not ready for businesses who use Verizon and have a mobile workforce. You're better off slamming your head against the wall rather than wait for Lenovo to fix the problem.

9 more replies
Relevance 70.93%

I've noticed a couple other threads regarding the GOBI 5000 WWAN card on 2014 X1 Carbon machines, so I know I'm not the only one having issues ... I have two new X1s (both 20A7), one with a Verizon GOBI 5000 and another with an AT&T GOBI 5000. The Verizon card installs fine and works, no issues there. The AT&T card has alternately: not shown up at all in Device Manager, shown up as an "unknown" object, and now after uninstalling the driver, removing the card, rebooting, re-installing the card, etc., the driver package installs successfully, but the card shows up under ports as COM4. The description is correct - system sees it as a "Sierra Wireless EM7355 ...". Naturally, Mobile Broadband Activation doesn't see the card and so won't run. In another thread someone suggested they were able to get hold of an older driver package that successfully installed; any hope of getting a link? Or better yet, an updated current driver?













Solved!

Go to Solution.

Answer:Alternate Drivers for 2014 X1 Carbon GOBI 5000?

Sorry, this is Windows 7 64-bit. Haven't tried with Windows 8 ...(and can't as we're standardized on 7).

6 more replies
Relevance 70.52%

So I'm using a Dell Inspiron 15 5000 series which has only one audio socket, while my headset has two plugs. The thing is if I plug the headset in and use it without pressing OK on this pop up dialog, I can use the microphone, but not the headphones. On the other hand, if I press OK, the headphones will work but the microphone won't. What's the problem here?

Answer:Dell Inspiron 15 5000 series doesn't work (entirely) well with my headset.

Hello. If you want to use both a mic and headphones at the same time, you have to either get a headset with a single combined plug, or get a usb audio jack and use your existing headset:
                      

1 more replies
Relevance 70.11%

I've currently got a 1st generation X1C with the Ericsson WWAN and was wondering if it was possible to swap out that card with the Sierra GOBI 5000 from the newer X1C to gain LTE data speeds? Has anyone done an upgrade or have relevant info? Any help appreciated.

Answer:Possible to upgrade WWAN on X1C 3443CTO to newer Sierra GOBI 5000?

Anyone?

1 more replies
Relevance 70.11%

I cannot access my work VPN with ThinkPad GOBI 5000 Mobile Broadband - Verizon.Error: after I login the VPN, i get a internet page cannot be displayed.   I can access my VPN with another WiFI.I tried changing the windows 7 64bit host file.Tried chaging GOBI Adapter DNS entries any alternative ThinkPad GOBI 5000 Mobile Broadband - Verizon "drivers" ? any solutions?  

More replies
Relevance 69.7%

We received 2 brand new X1 Carbon (type 20A7) models and neither have been able to detect the Gobi 5000 WWAN card (Sierra Wireless EM7355, Lenovo Part# 0C52902.)  The X1 Carbon's are running the latest drivers (including BIOS update), Windows 7, Windows 8, Windows 8.1- it doesn't matter: They will not detect the WWAN card in the WWAN slot. Tried 2 different WWAN cards straight out of the box from Lenovo (these happen to be the Verizon variants, I don't have any AT&T ones handy) and it's like it doesn't even exist. Yet I can remove either Gobi 5000 card and install it into a T440s and it comes up without any issue. I've tried taking a working and activated Gobi 5000 card out of a T440s and putting it into the X1 Carbon, yet the X1 Carbon refuses to recognize the device exists in Device Manager. I spent about an hour on the phone with Lenovo tech support who ultimately told me my question was "Out of scope" and something they would not handle. The tech even agreed with my frustration that it's listed right on the **bleep** Lenovo product site: "Mobil [sic] Broadband: Sierra Wireless 7355 - Gobi 5000" and couldn't explain why A) It wasn't working orB) Why Lenovo feels a feature listed on their own marketing materials was "out of scope" for support. She also confirmed the part number is exactly the same and the T440s and the X1 Carbon use the identical part. The tech ultimately speculated that some type of magical "system board upgrade"... Read more

Answer:ThinkPad X1 Carbon 20A7 and WWAN (GOBI 5000) note detected

kmehling,firstly, check out, is wwan port enabled within the BIOS setup? Item is named like this one - WirelessWANAccess.

9 more replies
Relevance 64.78%

Has anyone heard of this problem.

I have a Satellite 5000 with WinXp. I installed SP1 and now my sound card does not work.

Any ideas out there???

Answer:Satellite 5000 with WinXp,Service Pack 1 installed and now my sound card does not work

Has no one had this problem?

I have reinstalled the Yamaha drive a couple of time and still the same thing - no sound?

I bought this unit in Holland and it has been great until the Service Pack problem. I heard that Comcom was a good dealer there. May be I'll have to bring it to them, if I can not get help here?

3 more replies
Relevance 59.04%

I have lost my cd rom windows will not acknowledge that it is there although on start up is is shown as being found. thanks for the help with the video card.
 

Answer:lost cd-romdrive while installing graphics card card doesn,t work right either

Welcome to the forum Ray and Julia,

Recheck all the cables and make sure they are plugged in properly.

When you install a new video card you have to remove ALL drivers for the old card.
Uninstall the drivers for the old card in Add/Remove Programs and if you don't have the option there, check in Control Panel/Device Manager and make sure there are not 2 cards showing under Display Adapters. If the old one is still showing, Highlight it and click Remove.

Uninstall the new video card drivers, restart then re-install the new drivers.
 

2 more replies
Relevance 59.04%

Hi TechSpot folk, and thanks for in advance for anyone who can help me.

I've bought myself a new video card yesterday; HIS Radeon X1650 Pro 512mb IceQ, AGP. I went ahead to install it, and I get no picture after booting up.

I am receiving a signal to the monitor (I am not getting a "check signal" message) but no image comes to the PC. I went to put my old card in which is a Gigabyte 128mb 9600 Pro, and it now it doesn't work either!!!

Both cards are receiving power as theirs fans are chugging along.

I had also purchased a 1gig stick of RAM to complement my new video card, so I set my PC up the way it was before the attempted installation of the new card. Still nothing happening.

Current components of PC are:

P4 2.8ghz (D865PERL)
Gigabyte Radeon 9600 Pro 128mb
512mb RAM
DVD and Lite-On burner
 

Answer:New video card install no good, now older card doesn't work either

I don't know about the 9600 Pro but the X1650 Pro should have a power connector on it. Possibly a floppy drive type connector. Was that plugged in?
 

3 more replies
Relevance 59.04%

Hello. Few days ago i bought a new laptop. HP Notebook 15-ay057nw. Everything was okey but not the graphic card and performance. I can't play games !!! ;/ Laptop uses only Intel HD Graphics. I have the newest drivers in both graphic cards. In BIOS i can not find the option to change graphic card. I set all to "max performance" but still the dedicated card doesn't work ;/Dedicated card in any apps, games are 0%. I try everything and i can not find the solution. Guys please help me i really need a helpI'm giving a prof to this the AMD Graphic card is 0%. In dxdiag the first graphic card is Intel HD Graphics. In the advanced options of resolution the graphic card is Intel. Sorry for my english, i'm polish so my english not the best. Thanks for any help-Best wishes, Luke

More replies
Relevance 58.22%

Hi MajorGeeks and thanks for in advance for anyone who can help me.

I've bought myself a new video card yesterday; HIS Radeon X1650 512mb Pro IceQ, AGP. I went ahead to install it, and I get no picture after booting up.

I am receiving a signal to the monitor (I am not getting a "check signal message") but no image comes to the PC. I went to put my old card in which is a Gigabyte 128mb 9600 Pro, and it now suffers the same symptoms!!!

Both cards are receiving power as theirs fans are chugging along.

I had also purchased a 1gig stick of RAM to complement my new video card, so I set my PC up the way it was before the attempted installation of the new card.

Components of PC are:

P4 2.8ghz (D865PERL)
512mb RAM
DVD and Lite-On burner

Your advice is most appreciated - I need my PC for study, eeek!
 

Answer:New video card installation : BAD : old card doesn't work now

My guess is the ram is not compatable, with old card and old ram, reset cmos, unplug powersupply, remove battery from motherboard and let sit for a few minutes, hold down on-off button for a few seconds. Reinstall battery and see if it will run. Welcome to MajorGeeks. ed
 

7 more replies
Relevance 56.17%

I bought the Byop sim card package followed all the steps and my sim card did not work, is it possible it is defective ?

Answer:Why doesn't my Sim card work ?

Try testing with some other SIM card, to see if the problem is with the SIM card itself or the phone. Or, you know, try cleaning the SIM card, or making sure there are no obstructions, etc.

3 more replies
Relevance 56.17%

I have a P20-552 (PSP26E-025E9-S4) which is about 18 months old. I recently bought a Canon digital camera (IxUS 750) with a 2GB Sandisk Ultra II SD card and the combination is working well. Although I can transfer images from the camera to my Toshiba portable using an USB cable, sometimes I would like to use the SD slot on the portable but there seems to be a problem: seconds after pressing home the SD card in the slot I get the message "Disk is not formatted - Do you want to format it now?". I reply OK but then I get the message "The disk in drive E cannot be formatted"

The card continues to work perfectly well in both my camera and in my iPaq PocketPC. The SD card slot in the Toshiba will work quite happily with the Sandisk 256MB SD card that is usually in my PDA.

Anybody has any idea why the 2GB card doesn't work in the Toshiba? Is it a question of updating a driver - I did look the other day but I couldn't find anything that to me seemed appropriate but I might well have overlooked something..

I am running XP Home (SP2) and have fully automatic updates ON. I have Norton Virus and Zone Alarm running and am not experiencing any problems with any other software/applications - at least, no problem since someone suggested vacuuming my overheating laptop a few weeks ago ;-)

Thanks, Brian.

Answer:P20-552: 2GB SD card doesn't work.

It seems that the unit doesn?t support this card.
Check your user manual. There you will find a information that this unit supports only the following SD card sizes: 8/16/32/64/128/256 and 512 MB

According to this document the 2 GB are to high.

3 more replies
Relevance 56.17%

I have a tv card made by Orgio. When I clicked the short cut icon, I got a msg saying 'can't get device'. I reinstalled sofrware and put a hardware in other slot, but I got a same msg.

Please help me!!!

Answer:my tv card doesn't work!!!

by software you mean only the tv viewing program,right? you need to reinstall the driver

9 more replies
Relevance 56.17%

I recently developed a problem with my PC (p4 2.8 win XP 2gb ram) where
it doesn't want to seem to work with my 6800LE anymore.

Basically what happens is that I boot it up, get as far as the logon screen
and then my screen goes black and nothing works. Not even trying to use
the keyboard to login without seeing it happen.

Things I've tried:
Used a different graphics card.
Tried it with a 7300GT and got the same problem

Tried it with a 5200FX and PC works fine!

The difference between the 5200 and both the 7300 and 6800 is that the latter
both required a power supply.

So I've tried disconnecting everything to the powersupply except the
MB, HD and the gfx card and I get the same problem.

Has anyone got any ideas on what else I can try?
 

Answer:PC doesn't want to work with my gfx card

7 more replies
Relevance 56.17%

I have purchased a T&W Electronics TW8388 TV Tuner card (China Manufacturer) !
My card uses Philips SAA7130HL chip !

I installed the driver ( 2002 dated ) and the software (Ulead [email protected]) included on the driver CD.
My TV tuner card work well for a few seconds, then, the video froze (no motion), but the sound is still coming out from my

speaker, my computer becomes extremely slow (nearly not responding) for a while ! I pressed ALT + F4 and waited for about 2

minutes, the software closed and my computer returned to normal state ! I tried many times but the same situation occured.

I tried installing other drivers (older and newer) from LifeView, PowerView and even from DriverAgent.com (I can't find any

driver update on T&W website), also I tried other TVR Softwares like LifeView TVR, IuVCR, ChrisTV ... but they didn't work

for me !

Did anyone of you meet the same problem ? Please help me out !

Thanks !
 

Answer:TV Card doesn't work well !

14 more replies
Relevance 56.17%

Could anyone tell me the difference between Gobi 2000 and Gobi 3000? Thank you













Solved!

Go to Solution.

Answer:X120e Gobi 2000 v Gobi 3000

Hello,
 
I found a spec sheet for the Gobi 2000 here and the one for the Gobi 3000 here.  From looking between the two, it appears the newer 3000 model is ready for UMTS - AWS and EV-DO/CDMA ? 2100 MHz (standards which may not have been ratified when the 2000 was released), supports faster HSDPA speeds (14.4Mbps vs. 7.2Mbps) and is 2.5 grams lighter.
 
Regards,
 
Aryeh Goretsky
 

3 more replies
Relevance 55.76%

One day, the sound suddenly cut out. Since then, it hasn't worked. I had the same dilemma before, but then miraculously, the sound came back. The sound stayed for quite a while, a few months, then it went out again about 2 days ago. Since then, it hasn't worked.

I plugged my speakers into my phone and it worked. So the problem cannot be the speakers. I looked in my Device Manager and I can't find the driver. I tried installing the sound driver, but it tells me this:

"Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this Setup program."

So, my computer isn't detecting the sound card. My sound card is Sound Blaster Live! 24-bit

Btw, I'm running Windows XP

Anyone have any ideas or clues?
 

Answer:Sound card doesn't work...

That is a pretty old card and nothing lasts forever. Pull the card and give is a close look; see if you find any leaking caps, burned components, etc. If it looks OK, install it in another pci slot and pw ON. See if windows finds the card.
 

1 more replies
Relevance 55.76%

I recently purchased a new Chaintech GeForce 7300GT videocard to upgrade my computer. After following the directions my display is completely black through POST. Then the monitor shuts down. Any suggestions?

Answer:Video Card Doesn't Seem To Work

A friend of mine had a similar problem.
Oddly enough after installing the card a second time it worked flawlessly...!
Sorry... cant give more help (only symphathies)!

2 more replies
Relevance 55.76%

I just got back to Windows 7 Ultimate from Windows 8.
I instantly downloaded World of Warcraft and League of Legends, and i have problems opening both.
When i open League of Legends i get the message: could not load direct3d.
And when i open World of Warcraft i get the message: Failed to find a suitable display device. Exiting program.
I guess its some problem with the graphic card atleast.

DxDiag: dxdiag - Pastebin.com

Answer:My graphic card doesn't work as it should.

hi,

please post your pc specs...

3 more replies
Relevance 55.76%

The SD card reader slot on my Gateway laptop doesnt read my sd cards upon insertion. It is not the card, because I have tried multiple SD cards and they all do not work. There is no error message or anything, the drive just does not appear in my computer like it used to so that I can view the files on the card. I have had this problem previously, and it was fixed by repairing my texas instruments controller thing in device manager, but it is working ok when i look at it in device manager now without the slot working. Any help is appreciated!
 

Answer:SD Card Slot doesn't work

6 more replies
Relevance 55.76%

I installed win 2k pro and no matter what I try it always installs some default vortex legacy drivers. My card is a montego a3d xstream. 90% of my games don.t work........help
 

Answer:my video card doesn't work with win 2k pro HELP.

check on microsofts website to see if that vid card is compatible. if its not then u need to either get another vid card or downgrade to 98 or ME or see if XP supports it but if 2000 doesnt then XP probably wont either. you can also check the manufacturers website to see if they have updated drivers. just make sure u search high and low for drivers before u give up
 

3 more replies
Relevance 55.76%

Hello, I've been having some problems with my  graphic card.I've got a laptop XPS M1710, Vista and a Nvidia Geforce Go 7900 GTXYesterday, I installed an old game ( from 2001) and after that I watched a video on viddler.com in full screen.I had some graphical glitches with any moving image on my laptop ( including scrolling ). I restarted my laptop, and tried to watch the video again. After which the laptop crashed and successfully restarted, I tried to watch it again and now it wouldn't restart.It would give me the Dell loading screen with graphical glitches on it ( red lines and such ) after that the load thingie and after that instead of the windows logo, a blue screen with some info on it.So I went into safe mode, and my screen was littered with these small blue squares/blocs. Figuring it had something to do with my graphic card, I disabled that through Device manager, and managed to restart in normal mode. If I enable the card, I can't start up except in Safe Mode.So the problem is most likely my graphic card. Reason I said I installed an old game is that after that I had problems with the video, ain't sure it is connected. Could it be that the game messed up my graphic card? Is it possible my card is irrevocably damaged from a few crashes?I already did a virus scan and updated to the newest drivers. Please help me with this, cause I really don't want to buy a new card and I'd be really surprised that a few crashes could break it so... Read more

Answer:Graphic card doesn't work

Replacing video card in laptop would be a hassle.Did you try System Restore?Did you try to reinstall video driver?

14 more replies
Relevance 55.76%

JohnWill said:

I'd stick with the NEC chipset for expansion USB 2.0 cards, here's an alternative: http://www.newegg.com/Product/Product.asp?Item=N82E16815166002

This should work in any desktop system with a spare PCI slot.Click to expand...

i have a dell 8200 dimension and i bought a pci card to upgrade my computer to 2.0 usb port and it is not supported and it wont work as far as 2.0 speed. sorry for butting in to this thread but i was quite dissapointed. did i get the wrong info? and can i truly upgrade my machine?
 

Answer:USB 2.0 Expansion Card Doesn't work

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread. I've created a new thread for your issue here. Thanks for your cooperation.

RE your issue: It would help if you told us what specific card you purchased, and what the exact symptoms are.
 

1 more replies
Relevance 55.76%

I connected a gtx 750 it frozr to my hp xw 8400 workstation, when i powered everything it didn't boot and there was a red light and 6 beeps in  a row (graphics card not detected).  How is this possible that it can't detect my graphics card?? 

More replies
Relevance 55.76%

I recently sent out my laptop for depot service and when it returned, my SD Card reader stopped working. LED light doesn't blink, and I've tried it on two different Operating Systems. It used to work intermittently, and I had requested them to check it out. It came back and stopped working completely. Does anybody know if I could reseat it myself or something like that? Coz, I do not have the time to send it back to the depot, as I'm returning home (country) in a week. Thanks!

Answer:SD Card reader doesn't work

Help appreciated!

2 more replies
Relevance 55.76%

I connected a gtx 750 it frozr to my hp xw 8400 workstation, when i powered everything it didn't boot and there was a red light and 6 beeps in  a row (graphics card not detected).  How is this possible that it can't detect my graphics card?? 

More replies
Relevance 55.76%

I have just reinstalled Windows ME on a clean 'C'drive and after a couple of days have managed to install most of the neccessary items for the computer to run OK. All except the graphics card (I think). All the written word seems OK but the pictures are only just visible. Everything is too big as well. Using 'Settings'in 'Display' in 'Control Panel' it is set at 16 colors and 640 by 480 and I can't change it. My monitor is 17inch. Also, in the Device Manager under "Display Adapters" there is a yellow '!' against "S3Inc. Trio 3D\2X 362\368 V1.00.34". and under "Other Devices" there is a large yellow question mark and also a yellow question mark against PCI Multimedia Device....PCI Multimedia Video Device....USB Device. My Graphic card disc says, Graphic Master, Accelerator, Model No 213...I hope one of you kind gentlemen can help me on this. Thanks in anticipation and please try to make any questions not too technical........

Answer:Graphics Card doesn't seem to work

I think that you probably need to load your MoBo drivers so that it recognises the AGP slop and hence, your Graphics card.

10 more replies
Relevance 55.76%

I got a computer - free - from a friend of mine that's good enough for everything I need to do.  Except, it's got really crappy on-board graphics.  How crappy, you ask?  I can't even be on a website with too much activity (and do you know how many websites sneak in ads that dance around or have little movies?) without my computer crashing...blue screen and everything.  (It only happens when there's a video or something similar playing - and it ALWAYS happens when there's a video or something similar playing - so I'm sure that's what it is.)So I bought a graphics card to take some of the strain off.  The computer only has PCI slots, so I was pretty limited in what I could get.  I got the NVidia GEForce FX5200.I popped it in my computer and turned it on, and the monitor doesn't get a signal.  The little "on" light stays yellow, like the computer isn't even on.  The computer itself still makes all of its usual little start-up noises, so I know the only problem is that I can't see anything.  I even tried disconnecting the monitor from the graphics card itself and reconnecting it to the regular plug-in, but still nothing.  The instructions tell me that I might have to go into my BIOS and set the graphics to "PCI."  But...there's nothing in the BIOS menu that even remotely resembles video options.  Once I take the card out of the computer, everythin... Read more

Answer:I need help with a graphics card that doesn't work

Welcome to the CH forums.Please read thisHate to ask but you did install a driver

4 more replies
Relevance 55.76%

We've recently had a new graphics card installed, GeForce 220, and are having problems viewing on the TV. When we start the computer we can see it loading up, but when it finishes and gets to the desktop the screen will go blank and we can't see anything. The computer is no forced to use the VGA and we can't watch any videos, DVDs etc. The computer will not recognize the TV if we have both the TV and a monitor. We have tried other tvs/monitors and the video card is working properly so we figure it is the tv being a 720, anyone have any solutions/suggestions for me that don't involve buying a new TV? Oh we are running Vista 32bit. Thanks!

Answer:new graphics card doesn't work with 720 TV

hm... did you update the drivers? or try it in safe mode?

12 more replies
Relevance 55.76%

Hi, I had my X61 (7675-CTO) with Windows Vista (Business edition) and the SD card reader didn't read SD card. I tried 1 G SD card and 4 G sony memory stick. But both of them worked well on my another laptop with WinXP. What's wrong?  I know some guys have the same problem. pl. give some suggestion. thanks.

Answer:Card reader doesn't work!

I have the same exact problem. And to make things worse, I was going to go do a partial re-install and found out that I don't have a re-install image available on my drive (from the bootup support programs.) I too have the 7675-CTO, but I run Windows XP...JohnMessage Edited by johnfbartlett on 05-19-2008 09:52 AM

9 more replies
Relevance 55.76%

Hi, I have a belkin wireless 54g network card in one of my computers that has stopped working after I re-installed windows.

THE CARD:
http://catalog.belkin.com/IWCatProdu...duct_Id=179458


The mobo's NIC is working though. so I downloaded its latest driver:
http://web.belkin.com/support/downlo...ad=1430&lang=1

when I launch the 'driver program', a dialog box comes up and says: "please insert wireless card then run setup again"

The card IS inserted. It was woking before I did a fresh install.

I don't know what else to do other than take the card out and smash it with a very large hammer.

info:
WinXPproSP1

Answer:Wireless card doesn't work. please help.

reseat the card. go into device manager and scan for new hardware if it does not auto detect it.

2 more replies
Relevance 55.76%

Good-day to you all, I'm here with a necessity.
The necessity to find out the solution to a problem that let me dismayed.

I'm using Win XP SP 2, and short time ago, I've bought a memory card reader, those little usb.

The problem it is that, when I use it on my computer I can't copy any files, nor from the card to any folder of my hard disk, nor from any file from the hard disk to the card.
Seldom it works, and I can pass one file, but very seldom. If I want to transfer all the content of the card for example (1 gb) I can't. And when I want to see files that are in the card, it takes a long of time, just to visualize a single file, and when I want to copy it, I just can't or it takes a huge time.

I tried this device in other computers running WIN XP SP 2, and it worked out.
I have no doubts at all the that the problem is in my pc, and for sure in Win XP.
It is not unrelated to say that other USB devices, such as Mp4, or Mp3 players, etc. etc. etc. (of high speed file transferring USb 2) work well.

Not long time ago I tried installing my WIN XP SP 2, in another partition, just for trying if my WIN installation was bad or somethjng, but it doesn't work in the other WIN installation either.

I checked out the CMOS and it is all as it should be. (I mean the USB configuration) it is marked "Enabled" in all the options.

I tried connecting it in all other ports (from the front and back) but it didn't work either.

The exact error... Read more

Answer:USB card device doesn't work

Does the problem just occur on very large files?

If you open the Device Manager (run devmgmt.msc) and look under the USB tree -- is there an entry there for an "Enhanced" USB controller? If so, is it "working properly"?

You might try doing what is known as a USB "cleanup":

USB CLEANUP

First set a System Restore point and test it: start > run: msconfig > Launch System Restore.

The standard approach to these problems is to remove all the USB devices in the Device Manager and let Windows reinstall them. But there is a special technique to it.

I am uploading a registry patch you will need to download, unzip and run. Confirm the merge to the registry.

It is the patch described in JohnWill's note here:

http://forums.techguy.org/hardware/449735-usb-problem.html#post3435808

Once you have installed the patch, follow the rest of his instructions.

Note: in some cases Windows does not have the proper install path for the information files required. If the New Hardware Wizard prompts you for an install location, point it to:

c:\windows\INF

This is a hidden directory, so you will need to have "show Hidden Files" enabled in Folder Options > View to see it.
 

3 more replies
Relevance 55.76%

Just replaced an aging 32MB G400 card in a 98SE system with a Radeon 9200SE, and now my DVD drive won't play anymore.

Any suggestions as to what I can do?
Thanks

Answer:New graphics card, now DVD doesn't work

Make sure you didnt knock loose an IDE cable

Everytime i touch my case, something comes undone like that

9 more replies
Relevance 55.76%

deleted - wrong thread.
 

Answer:new video card doesn't work

OK, I put this in your own thread AND edited out your email addy. Replying to a guide is not going to get you any help. They are to read and use however not to reply to. Next posting your email on the forum is asking to be spammed.
 

3 more replies
Relevance 55.76%

My sound doesn't work What can I do?

Answer:my sound card doesn't work

check that the drivers are installed, using device manager A thank you would be nice, if I have helped.

2 more replies
Relevance 55.35%

Thanks in advance Hi Could anybody who own a x220 with internal wwan card gobi 3000(only that model) give me the vendor and id of this hardware?I need smth like this(it can be found in device manager) PCI\VEN_8086&DEV_0085&SUBSYS_13118086 (this string is for centrino 6205). I need the same string but for gobi 3000, so could somebody past it here? If somebody owns gobi 3000 and do not know how to find it juz post here and Ill write detailed tutorial.

Answer:gobi 3000 wwan card

I don't have the Gobi 3000 device, but the information you need is here:USB\VID_1199&PID_9012 SIERRA WIRELESS MC8355 GOBI 3000 (QDLOADER)USB\VID_1199&PID_9013 SIERRA WIRELESS MC8355 GOBI 3000 9012 & 9013 are items for the same device. As you know 9012 is for fw loading management. Also, as you see Gobi 3000 sits on usb interface only.

1 more replies
Relevance 55.35%

There are many issues known with the Gobi 2000, but now I am at a point where the solutions found in the internet do not help me any further:- drivers are installed, device shows in the device manager, firmware is set to vodafon- I just don't know how to turn on the 3G-card, it neither does not show in the connection manager (CTRL-F5) nor can it be turned on with other software Does anyone know how to solve this issue? ThanksS  

More replies
Relevance 55.35%

I have a quick question for those who have the Gobi 3G. When you first turn on your computer does your WWAN light stay on and remain on until you log in into Windows? Since my bluetooth light and WLAN turns off immediately after going past the BIOS screen. Since there are times when I didn't log in and my battery life was pretty drained. Wondering if there's any fix or setting changes I can make? Or is this even normal? Thanks.

Answer:Gobi 3G Card powers on always at start?

Hello mate, My gobi doesn't turn on at startup. If I turn my computer off with the gobi on, the next start it will be on. But if you shut it down before turning off your laptop it shouldn't be on at startup.





__________________________________________________________________________________Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

4 more replies
Relevance 55.35%

Is it possible to use Gobi 2000 wwan card on x61 laptop?I think drivers won't be issue, but will my laptop boot with that card installed?  

Answer:gobi 2000 wwan card on x61

http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X61-3G-Wireless-WAN-Configuration/td-p/28572

1 more replies
Relevance 55.35%

HP lt4112 GOBI 4G module does not work reliably. Especially during moving (eg. in train, bus) when handover between BTS occurs quickly one after another between various types of networks (LTE, 3G, 2G) the Gobi module simply fails to function after longer or shorter amount of time. It loses connection, resets itself, turns itself into Locked state (requiring entering PIN again) or even hangs in hard such way that even turning off and on in Windows Netowrk Settings panel doesn't help, even shutting down the computer does not help and the device must be powered off through removing battery from Zbook for a couple of seconds (this means of course opening back cover, removing battery for a while and then put it back).This behaviour happens most probably due to poorly written drivers or with smaller probablity due to hardware malfunction or simply bad design of the module.I do not recommend anybody to buy HP products which are equipped by this module. HP constantly fails to produce high quality drivers for their products and its software is often buggy and not reliable.

More replies
Relevance 54.94%

Hey Everybody!

Alright so today i decided to try to overclock my CPU (DualCore AMD Athlon 64 X2, 2000MHz 3800+) from 2.00 to 2.32 being the max that they would let me go up to in my bios.
i boot up my computer and i found that my sound driver had stopped working, i reinstalled the driver but still it doesn't work. So i went back into my Bios and set the clock speed back to 2.00 hoping it would magically heal itself. I boot up my computer and still no sound at all.

My Motherboard is PC Partner RD480k9-A72D
The Sound Driver that comes with it High Definition Audio Driver Package -Kb888111

Please Help as much as possible!
 

Answer:Sound Card Doesn't Work After Overclocking

I'm having trouble finding that Motherboard. Doing the following, exactly, will help you provide more info (note the clickable links, in the text)

Please put your System Specs information in your Profile

If you have a brand name computer (like Dell; HP; or other) please place the Computer name & Model number in your Mobo field of your Profile
 

8 more replies
Relevance 54.94%

Hi, on the first days when I had the device... it worked normally.Now it doesn't Any ideas why? I can't even find the sd card reader in the device manager. I tested 3 different cards so far, it didn't even recognize something.  

Answer:SD card slot doesn't work suddenly Y2P

Have you changed anything recently?  A driver update or something uninstalled?

9 more replies
Relevance 54.94%

Hi, I have an Asus A8N5X and I am trying to install a 12-in-1 Card Reader and a fan. I install the fan to the CHA1_FAN socket but.. it doesn't work! It works on CHA2_Fan and others but not CHA1_FAN! This mobo is BRAND SPANKIN' NEW out of the box, so I know there isn't any problems with it. I don't know why the 12-in-1 Card Reader doesn't work.

Here's the motherboard:

. the Lower left CHA1_FAN socket doesn't work! and where do I install the Card Reader to? COM 1? Thanks!!
 

More replies
Relevance 54.94%

hey guys,
yesterday i bought a new Nvidia XFX 7600gt AGP to replace my old 5200 AGP and i got 512mb ram to up my gaming performance. I put these into my computer, the correct slots and everything, plugged my comp back in with the new adapter from the comp to monitor and then the problem began. The computer booted up, and the monitor had power, but nothing was displayed on the screen. Instead of a green light on the monitor, there is an amber one like when it's in standby. I'm baffled.
My specs are:
Intel Pentium 4 3CPUS
3.00ghz
Previously had 512mb ram, just put another 512 in.
Previously had 5200 AGP, just put in a 7600GT AGP.

Any help would be appreciated!
 

More replies
Relevance 54.94%

I decided it was about time to upgrade my slow computer for games, especially since it had built in graphics.

I ordered a HIS Radeon 4670 card, based on reviews it was good for my budget and most of the reviews were positive.

First, I upgraded my slow sempron 3400+ to a 5600 x2, about the fastest cpu I can use with my motherboard with low wattage in-mind (I think it's 65 watt). This seemed to install fine, but the video card did not apparently. (unless it doesn't work with my montor?)

All I know is, I plugged the video card in the PCIE slot and get no output signal to my monitor with it. It is an older CRT monitor (Samsung SyncMaster 955df) and I never read they wouldn't work with newer cards, but I guess it's possible?

Anyway, the card doesn't have the VGA pin for my monitor, but it came with an adapter.
When I hook up the adapter there are 2 slots that it fits into and neither one will display a video signal, when I boot my computer. I tried uninstalling the built in graphics drivers and also disabling the on-board graphics in device manager. Neither one has fixed my problem. I've tried to contact customer support but there is no number on the web site except for one in China!

I noticed the fan came on on the card, but I'm still worried because XP doesn't even seem to detect it. I hope I didn't get a broken card, but if it is I need to hurry up and send it back. Any advice?
 

Answer:Solved: New Video Card doesn't seem to work

16 more replies
Relevance 54.94%

Hello People!I have a problem I haven't been able to solve, so I thought I would let the forum see if they could help me.  I have a amd xp 1200 cpu, 768mb ram, 20gb HD, 80gb HD, 250gb usb HD, biostar geforce fx5200 video card, running xp pro 2002, sp2.  I recently installed this video card and now I can't read my usb hd.  (I also upgraded to firefox 3, but don't think this is the problem)  I upgraded all my drivers and reinstalled everything but still no usb HD.  It works fine with my old cirrus logic 2mb video card but when new card is installed it doesn't want to work.  (old card was pci and new card is agp if it matters)  External drive shows up in my computer but can't access it because of an I/O error.  Device manager shows everything is fine.  I have tried new drivers, old drivers, installing, reinstalling bios upgrade and everthing else I could think of but the usb hd is inaccessible with the new video card.  Any suggestions or advice is deeply appreciated!!!

Answer:USB HD doesn't work after video card install!

If you have any data on the drive, copy it to another location then try reformatting the drive on the problem computer.Alan <>< 

1 more replies
Relevance 54.94%

Hi

I have a GeForce 8500GT Graphics card that no longer works if I install ANY drivers available for it. Before you ask I have tried the oldest drivers possible, they do not work either! It all started from a BSOD (unfortunately I lost the minidump files in a system restore) and the following days it stopped working, the computer would freeze on the Windows starting logo of Win7. Making it seem like a OS problem. But a week later and numerous tests later it appears the card works fine without drivers, but as soon as I install any it stops working. I was wandering if there is another way of using this card?

Cheers

Ending
 

Answer:Graphic card doesn't work with drivers!

8 more replies
Relevance 54.94%

I have a HP Pavilion dv2315nr.  It has a built in wireless card, Broadcom I believe.  I have went to the HP site and downloaded/installed the driver but nothing happened.  It says that I have installed it and it shows that it is installed but I am unable to access the wireless internet card.  If it helps the light on the card is always orange, I thought it is supposed to be blue.  Can anyone help I would appreciate it?

Answer:Built-In Wireless Card doesn't work

Has it worked in the past?When did it stop working?

14 more replies
Relevance 54.94%

Hello. I have laptop HP 15-af138ur, Windows 10 64-bit. My integrated videocard is amd radeon R5, dedicated is amd radeon R5 M330.The problem is: all games run through integrated card. I tried to choose high performance in catalyst center. But this doesn't help. What can I do?

More replies
Relevance 54.94%

I have a problem with my graphics card. I dont know if its borken or anything. It just doesn't seem to work. One day my computer just crashed. Than I shuted it down suddenly. Than when the computer rebooted the videocard drivers didn't seem to work. I unistalled and reinstalled the drivers and same problem. Everything seems to work, but I can't play any games. Every game throws a error message at my face. Most common error is the D3D9 error. I am not sure that my nvidia graphic card is borken or maybe its a overheating problem. I am really not sure. Anyway if anybody has got any ideas, please tell me.
Operating system:NVIDIA GeForce 9800 GT, windows 7 ultimate 32-bit
.

Answer:Nvidia card doesn't work for some reason!

The D3D9 error can be fixed by installing the latest DX9 runtime from Microsoft.

Download details: DirectX End-User Runtime

9 more replies
Relevance 54.94%

Hi,
I just bought a Asus K8V-X and my video which is a nVidia TNT2 doesn't work with it. It goes in windows but, detect it as a Standard VGA. I tried installing nVidia drivers but it says that it cannot detect any hardwares for the drivers. And also I installed my motherboard CD.

Can someone helps me??

BTW: My CPU is a Sempron 64 Bit 3000+

Answer:Video card doesn't work with new mobo!

is it the agp or pci version?

4 more replies
Relevance 54.94%

i have put my graphics card in and than clocked my integrated one. then i found out taht the SiS card sucks and i tried to get my geforce back inside. oh and it says SATA device not found even though i installed a new SATA driver from SiS
 

More replies
Relevance 54.94%

Hey guys Mettalknight here

I recently bought a new Graphics Card (A Powercolor HD7750 Pic) this graphics card has 1 HDMI 1 VGA and 1 DVI slot. My old graphics card had the same setup so I thought no problem I will just take my 2 vga monitors and since I already have a converter it will work no problem right? Well I was wrong on that one. So my VGA monitor now works but the one that is converting from DVI to VGA doesn't. Is there any way to fix this? Do I need to go out and buy a new converter?

Thanks a lot for the help!
Mettalknight

Answer:Got a new graphics card and now my second monitor doesn't work

The problem is that the new card is DVI only on the DVI port. Also what you are connecting with is not a converter but an adapter. An actual DVI to VGA converter can cost upwards of $100 or more, where the adapters are a couple of dollars at most.

Sounds like your old card (what was it by the way?) was intended to do VGA over the DVI port in addition to the native VGA port. Unfortuneatly there is much you can do in this regard as very few if any cards made recently do more than VGA from one port, either native or via DVI adapter.

1 more replies
Relevance 54.94%

Hi, I try with the card reader socket on my Y550p but I see it doesn't work, surely that I already installed required driver software for it. Could you please help me out? Do I need to do anything to make it work? Thanks.

Answer:Y550p 's card reader doesn't work

you can try to re-install card reader drivers ( windows 7 - xp ), make sure the cards are working and seated well on socket.( you may also need to re-install chipset drivers : windows 7 - xp and/or storage drivers : windows 7 - xp )

3 more replies
Relevance 54.94%

I have recently been doing some small upgrades to my PC and just today I started hooking the Mobo and the Video card together. I just bought the video card at the store today, as the last part that I had ordered in the mail arrived yesterday. These are the specs of my comptuer:

Asus P4S800D-X (AGP 8x/4x) <a href="http://usa.asus.com/products3.aspx?l1=3&l2=12&l3=45&slname=SiS%20655FX">Link</a>
Pentium 4 2.53 GHz 533 FSB

Kingston HyperX 2GB DDR PC3200

new Video Card (doesn't work)
VisionTek ATI Radeon x1300 AGP 8x/4x
(new video card link including the place i bought it)
http://www.circuitcity.com/ssm/Visi...44064/catOid/-13011/rpem/ccd/productDetail.do

Old Video card (works)
Xtasy Nvidia GeForce 4 Ti4600

When I plug in the new video card, I get nothing on the screen and not even a beep from the mother board, however when I plug in the old video card, it works perfectly. Are there any known issues with these or is the video card a dud and I should return it to the store for a new one??

Thanks for all your help in advance!

~guyaton
EDIT: Note Support for the Video card is only available monday through friday.
 

Answer:Solved: New Mobo, New Vid card. Doesn't work

7 more replies
Relevance 54.94%

Hi, i have problem with my ThinkPad R61 (8918). The MMC card reader doesn't work. The windows device manager says that "Device Cannot Start (Code 10)". And now i am wondering that is a software problem (i made a clean install of windows, installed all drivers from lenovo support page, all works ecxept Ricoh card reader) or hardware problem. have anyone had symilar problems with their Thinkpad?

Answer:R61, Ricoh card reader doesn't work...

Exactly the same problem here. Frank

1 more replies
Relevance 54.94%

+Mon #1 works fine Mon #2 Stops beyond initial part of boot. Tried new drivers plus on line tech support

Answer:1 monitor doesn't work. V/tek card w/2 mon input (vga) & dvd

Just because a graphics card has two monitor outputs, it doesn't necessarily mean it supports two monitors simultaneously. Cards which support two monitors usually have two identical output ports (eg 2 x DVI ports or 2 x VGA).On your card it's very likely that it has a VGA & a DVI port just to give the user more connectivity choices with a single monitor.For example, your monitor may have only a VGA port, or only a DVI port. That won't be a problem because your graphics card can accommodate either type. But the card isn't designed to output a signal from both ports both at the same time.

2 more replies
Relevance 54.94%

I have a Satellite P10, which has a built in SD card reader. I got Windows XP SP3 from Microsoft update a few days ago, and suddenly the card reader couldn't see any SD card larger than 128MB. It was listed in device manager with a exclamation mark by it - and didn't show up as a removable drive in My Computer. Error message was "Device cannot start - Error Code 10"

I uninstalled SP3 , and it works again. I've tracked it down to this hotfix which is included in SP3:

http://support.microsoft.com/kb/934428/

If I install this on it's own I get the same symptoms, and uninstalling it cures it again.

So for the time being I can't install SP3. Does anybody know if it's possible to remove a single hotfix from a service pack?

thanks
Doug.

Answer:SD card doesn't work after XP SP3 install on Satellite P10

Hi,

wheres the problem?? Install the SP3 and remove the KB934428 afterwards simply by going into "Add & Remove" programs and checking the box "show updates".
All Windows update-packages will be shown in the list of installed applications.
Just go there, search for this KB-update and remove it to re-enable your SDcardreader.

Greets

9 more replies
Relevance 54.94%

I upgraded to Win 8.1 an now the Card Reader doesnt work. Nothing happend when I put a Card in it. I Tried serveral. I changed the Driver to a new one from the Homepage of Realthek - nothing. What can I do?

Answer:Qosmio X70 -The SD-Card Reader doesn't work

Can you please tell us what the status of card reader device in device manager is (storage controller)?

By the way, have you upgraded your machine following instructions on http://www.toshiba.eu/innovation/generic/windows8_1-message/ ?

5 more replies
Relevance 54.94%

I have a D-Link DWL-520 V. E1 wireless card and want to install it in a computer running Windows XP. D-Link does not give technical support for this card but does have the driver for download on their website.
I downloaded the driver for WinXP and clicked the setup icon to install and it installed the Utility program but never produced the screen to install drivers like the manual says it should. Is anyone familiar with this and know why I can't install the driver? The utility does me no good if the driver is not installed.
 

Answer:Solved: Wireless card doesn't work

http://support.dlink.com/supportscope.asp DLINK Support

http://support.dlink.com/products/revision.asp?productid=DWL-G520 Revisions of D-Link

http://support.dlink.com/products/view.asp?productid=DWL-G520 Information on your particular product.

Up at the top of the page there is a contact number -

Hope this helps...Jazz
 

2 more replies
Relevance 54.94%

I just bought a new computer from Acer, it was fitted with Nvidia's Geforce G210, since I had a 8600GT lying around, I placed it in the computer.

It worked for about a week then suddenly quit. When I hit the power button, the fans start turning, but the monitor says there's no video input.

I thought it was the 8600GT that was malfunctioning, so I fit it into my other rig, surprisingly enough, it still works.

The new Acer computer still works with onboard graphics though.

I bought the Acer M5800

Here's the link to the computer's page: http://www.acer.com.sg/acer/product...d189e.c2att1=228&ctx1.att21k=1&CRC=3279785648

Here are the computer's specs:
Intel® G43 Express Chipset
Intel Core 2 Quad Processor Q8200 (2.33GHz, 4MB L2 Cache, 1333 FSB)
2GB Ram
750GB S-ATA HDD
Nvidia GeForce G210
Acer said it was "Probably incompatible with the motherboard" I doubt so since it worked for a week
 

Answer:New Graphics Card Suddenly Doesn't Want To Work

Bump
 

1 more replies
Relevance 54.94%

Hello guys,

I have a Tecra A3-106, my card reader started not reading the cards in these days.. (I have recently formatted my system using the recovery dvd) when I put my memory stick into the drive i can see the card icon on my computer but when I try to access the content, I get an error saying ''Card needs to be formatted'' and I can't do anything... When I insert a different SD card, the reader doesn't even recognise it.. (As it used to access these medias successfully before)

I tried uninstalling the device then installing automatically but no luck, tried downloading the SD Secure Module but when I try to install it, I get an error saying ''SD Secure Module.msi cannot be located'' or something like that..

Long story short, I can't use my card reader and I have also checked these cards on a different system and they are readable.

What could that be? Any troubleshooting ideas are highly appreciated.

Best Regards,
Onur.

Answer:Tecra A3-106 SD/MS Card Reader Doesn't work

Hi Onur

It is definitely not easy to say what is wrong there. In my opinion there is no much to do. If the slot doesn?t work properly after recovery image installation it can be some hardware problem. Installing recovery image the hardware is configured on the right way and wrong driver installation is definitely excluded.

Whet you can do is to test it with different SD cards (different manufacturers and also different capacity. I don?t know what is maximum supported capacity for SD card but it is possible the card will not be readable if you use 2 or more GB SD cards.

1 more replies
Relevance 54.94%

Hey!My memory card reader doesn't work for some reason. When i put the card in it, it only showed it like an empty CD reader but said it's empty... Also it was always hidden.Now i downloaded some other driver, and when i put the card in it only appears for a second, then disappear, and gives a sound when i remove an USB cable from the laptop...Any suggestions? I have windows 8.1

More replies
Relevance 54.53%

Pasting in contextual information from another post. ~ OBconflicker.Bi!nf worm keeps reappearing, windows defender monitor stops working, slow computer, windows search protocol windows pop up, Malware, virusPop up windows keep appearing "Windows search protocol host stopped working and was closed" Itunes occassionally doesn't work, Media Sync doesn't work. Hard Drive keeps working in the background. Windows Defender no longer monitors the running programs.End of added information. ~ OBLogfile of Trend Micro HijackThis v2.0.2Scan saved at 8:46:00 AM, on 1/11/2010Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v7.00 (7.00.6001.18349)Boot mode: NormalRunning processes:C:\Windows\system32\taskeng.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Program Files\Windows Defender\MSASCui.exeC:\Program Files\Digital Media Reader\readericon45G.exeC:\Program Files\Java\jre6\bin\jusched.exeC:\Program Files\Intel\IntelDH\CCU\CCU_TrayIcon.exeC:\Program Files\Common Files\Intel\IntelDH\NMS\Support\IntelHCTAgent.exeC:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exeC:\Windows\WindowsMobile\wmdc.exeC:\Windows\System32\hkcmd.exeC:\Windows\System32\igfxpers.exeC:\Windows\sttray.exeC:\Program Files\... Read more

Answer:microsoft windows search protocol host stopped, slow, firefox doesn't work, itunes doesn't work

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Relevance 54.53%

i have a tosiba Satelite P10-824 an I don't no why I can use Infra red and sd card reader.
I have installed the driver but i dont ni why i can use it.
When i do a sd card in not happens and i can not sent something via infra red.

Answer:Satelite P10-824: SD card reader and IrDA doesn't work

Hi

Check the device manager.
Are the mentioned devices properly recognized in the device manager or there are some yellow exclamation marks?
How did you install the OS? Form Toshiba recovery CD or manually? Did this issue appear from first day or did you install any 3rd party applications?

As you see there are many questions because nobody knows what you have done on your notebook. In my opinion the corrupted registry entries could be a reason for such issues.

I think you should try to remove the Irda and SD card reader from the device manager and after new reboot you should ?auto? search for the devices.
The drivers should refresh and it should be possible to use the devices.

5 more replies
Relevance 54.53%

Replaced dead videocard with msi HD6450 and machine won't boot. Tried old card I had laying around and it works fine. My searches have turned up questions about BIOS / UEFI compatability problems but no solutions. This is the second card I've tried, I sent the first one back assuming the problem was with card.Motherboard: Angelica 1.2CPU: AMD FX-8150Bios: Ang_716      4/5/2012The original card was a GeForce 8500GTThe card I'm temporarily using is a GeForce 9300 GE 

More replies
Relevance 54.53%

I just purchased a new Hewlett Packard 64 bit laptop 2 weeks ago. I thought it had biult in firewire port but doesn't. I have tons of dv video waiting to be captured & keep having trouble. I bought a Dynex firewire card & the booklet that came with it doesn't list Vista (XP, 98, 200, etc. are listed). I put the card in, attach cable to camera as should be but nothing happens. It doesn't recognize anything. What am I doing wrong? How can I get my videp from this dv camera to my pc? Please help, Christmas is coming & I would love to film knowing it will be on dvd for everyone to see eventually. Thank you, Stacye
 

Answer:IEEE firewire card doesn't work, is it vista?

Do you know the model number of the laptop?
 

8 more replies
Relevance 54.53%

Hi All

I've installed Win 7 on my TECRA M2 and everything worked fine at once ... except for one thing! The SD card reader is not recognized (worked well with XP).
Any hint please ?

Thanks in advance

JP

Answer:Tecra M2 - Card reader doesn't work on Windows 7

Hi!

Is the card reader listed in device manager with yellow exclamation mark?

Normally I would suggest that you should try the card reader driver from Windows Vista but there is no card reader driver on Vista available on the Toshiba website.

So it seems that you have to live with this issue or you try a card reader driver from another notebook?

Bye

5 more replies
Relevance 54.53%

I have a problem with my sound card, the line in jack does not work for recording, i activate it in the volumen control configuration, (i mean on the little speaker that is on the clock icon) in the reproduction and record propieties, when i plug for example a cd player on the line in jack i can hear the music but i can't control the level of output, and the worst thing is that i can't record nothing, i checked all the hardware drivers, all software, and everything is correct! What could be?? Please help me!!

**** I tried on others computers of my friends, and i got the same problem, maybe i'm doing something wrong....
 

Answer:Line In Sound Card Trouble, it doesn't work!!

what type of sound card does it have it's own software program that needs it to be enabled
 

3 more replies
Relevance 54.53%

I have a Indian Bank MasterCard World EMV Chip card with international transaction enabled. However I'm unable to use it on Microsoft Store.
It works fine on Mac Appstore, iTunes and BlackBerry AppWorld where there's no need to enter any OTP but on Microsoft Store whenever I try to purchase something then the phone launches a window in Edge browser and asks me to enter OTP.
The problem is that my card is a Chip based Signature and Pin card which doesn't use OTP authentication.
What should I do?

Answer:Why doesn't my debit card work on Microsoft Store?

Originally Posted by Subhankar Das I have a Indian Bank MasterCard World EMV Chip card with international transaction enabled. However I'm unable to use it on Microsoft Store.
It works fine on Mac Appstore, iTunes and BlackBerry AppWorld where there's no need to enter any OTP but on Microsoft Store whenever I try to purchase something then the phone launches a window in Edge browser and asks me to enter OTP.
The problem is that my card is a Chip based Signature and Pin card which doesn't use OTP authentication.
What should I do? Try adding your card to Paypal and link the paypal account as a preferred billing option on outlook.com. Alternatively you can link the card directly on outlook.com, the former would be a recommended option - just in case.

more replies
Relevance 54.53%

I looked on my PC and Drive e is there but no card reader or drive f is there

More replies
Relevance 54.53%

when i try to install drivers i get an error message 'setup was unable to complete the installation try to setup your display adaptor with a standard VGA driver before running setup'
What do i do now?
 

Answer:ATI radeon 9250 graphic card doesn't work

We need more information. What driver version are you trying to install, and what version of windows are you on?

Might was well give us your computer specs as well. Mobo make/model in particular.
 

43 more replies
Relevance 54.53%

Hi, I recently purchased a T400 (Type 2764) with the ATI HD 3400 graphics card and Windows XP (I don't want to run Vista).  Whenever I start my computer, however, I get a message saying that the ATI card has no driver.  I understand that Lenovo decided to not pre-install the particular driver for XP and as a result I've tried downloading the driver from both Lenovo and ATI, but neither seems to work.  Any help would be appreciated.













Solved!

Go to Solution.

Answer:T400 Graphics Card Driver Doesn't work

The 2764 version of the T400 has switchable graphics. If the original preload was Vista, then switchable graphics were enabled. XP doesn't support switchable graphics, so you must choose between the Intel or ATI card. From Lenovo support doc,  MIGR-70665: For switchable graphic machines, boot into bios via F1, select config -> display and set the following parameters: Default Primary Video Device [Internal] Boot display device [Thinkpad LCD] * Graphics Device [Discrete Graphics] ** OS detection for switchable [Disable] * Change this setting to VGA or DVI if the machine will be used on a Advanced Dock** Switchable Graphics is a Windows Vista feature only. Set the Serial ATA setting from AHCI to Compatability mode (this will prevent the BSOD 0x7B error on booting the XP media. Terry

2 more replies
Relevance 54.53%

Hi guys,

I have 3 virtually identical PC's and just bought 3 new Gainward GTX 750Ti video cards for them.

The problem is that the new card type doesn't work in one of the PC's and all I get is a black screen from start up.

The PC with the problem was running a Gigabyte M61pme-S2 video card before which still works fine in that PC and the onboard video also works fine so there's something about the new card and that machine that is a problem, even though that combination is fine in the other identical PC's.

Things I've tried so far:

-I've tried the same card in other PC's and it works fine.
-I've tried putting a higher voltage PSU in the machine with the problem.
-I've tried removing the BIOS battery for a minute to reset the BIOS and also selected default factory settings
-I've tried a new video cable and new monitor
-I've tried running through all cables out of the card ie. HDMI, standard etc

I'm not sure what else to try.

Can't be a driver problem because it doesn't get to that stage.

Can someone please offer some advice on what the problem is as I doubt I can get a refund on a card that will test as working.

Many thanks,

Ana
 

More replies
Relevance 54.53%

Hi guys,
I just bought new graphic card (msi radeon hd 7850 twin frozr 2gb) and seasonic 650W power supply today.

my current specs are :

Monitor: HP 2309m (1920x1080)
Motherboard: MCP73M01H1 (Napa)
CPU: Intel Core 2 Quad Q9400 2.66 GHz
Memory: 4 GB PC2-6400
Graphic card: msi radeon 7850 twin frozr III oc 2gb (previous one: GT 130 768MB)
PSU: seasonic 650W (previous one: 350W)

And when I put them together and turn on the power, the monitor doesn't not detect any signal (dvi).
so I switched the dvi cable to the on-board graphic card then the monitor can display but the device manager only detects ob board graphic card.
then I put back gt 130 and it works perfectly as before.
then I tried putting 7850 back then same issue (monitor doesn't detect anything)
I can see the fans are running on 7850

Help pls?

Answer:New graphic card doesn't work (msi 7850 TFIII 2gb oc)

Hi, As you mentioned that your onboard is working fine, this rules out the possibility of faulty motherboard. Try to run your graphic card on a different machine. If the problem still persists, then i would suggest you to RMA the card, as it might be faulty peace.

6 more replies
Relevance 54.53%

I have installed the driver for the card reader, but if I put for example a Memory Stick into the cardreader, Windows does not show it or recognize the Memory Stick. And there are no icons for the card reader in "My computer".

Can somebody help me?

Answer:Toshiba A200-1CC Card Reader doesn't work

Hi,

is the Smartcard service activated in your "services"? If you don?t know what this is then Click on Start -> Control Panel -> Administration -> Services -> Smartcard

Then activate the Smartcard and enable it.

That should work, otherwise you can go to the Toshiba drivers download site and check for Cardreader drivers which should enable the whole stuff, too. But I am not sure if the modify the settings in your services...

Here?s the link to the Toshiba drivers download site:

http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

Greets

1 more replies
Relevance 54.53%

Hi, I have recently purchased a Libretto U100 and when I put a 2GB SD card into reader the computer locked up,screen froze and had to reboot system.

I reinstalled OS XP pro SP2 from recovery disc and the SD card reader worked fine. However as soon as I updated all software to SP3 the problem returned.

Any suggestions/help is appreciated.

Answer:Libretto U100 - SD Card reader doesn't work with XP SP3

Well, SP3 causes more of the same problems or even worse. My laptop from an other manufacture gives me a BSOD after installation of SP3.

I never heard of this issue (with the SD card), but I guess it has something to do with SP3 drivers. Maybe you can download some other drivers for the cardreader form the manufacturer website?

5 more replies
Relevance 54.53%

I just intalled 2GB extra memory but when it is installed the wireless card doesnt work. When I take it out the wireless works!
The wireless card reports "device cannot start" error 10 when the mem is installed but works when the mem is removed again.
The fault replictes reliably every time I install / uninstall the mem and only started when the mem was installed

I tried the new part alone in the slot where the original part was and it works fine
( both are 2GB) but when original part put in 2nd slot - it doesnt work.

Anyone any ideas what the issue might be?

Thanks

Paul

Answer:WLAN card doesn’t work with 4GB RAM on Satellite Pro U400-153

That is a really strange issue...

First I would make BIOS update so check the Toshiba European driver website for an update:
http://eu.computers.toshiba-europe.com

If you don?t have success with an update, try two other memory modules. Maybe they are not 100% compatible with the notebook.

3 more replies