Computer Support Forum

Need a digital signed driver

Question: Need a digital signed driver

Greetings to all, I have W520 64 bit Windows 7. I get an alert when I restart the laptop indicating a digital signed driver for drive Rapid Boost Drive. How do I get one or stop getting this message ? Thank youi. Ldxrunner

Relevance 100%
Preferred Solution: Need a digital signed driver

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Need a digital signed driver

Do you mean RapidBoot?

4 more replies
Relevance 76.67%

Hi,

This is my first post on these forums, so please excuse me if anything is wrong.

Details of the problem: I have a Sony VAIO laptop that runs Windows 7 Home Premium x64. I recently downloaded the same version from digital river that has SP1 included and installed it on my laptop. I installed the drivers that I had downloaded from sony's esupport site which went fine. After I rebooted and tried to install the rest of the drivers, I started getting the Code 52 error: Windows cannot verify the signature of this driver. I've seen that every driver can be installed immediately after the system has been booted the first time (after a clean install). Once rebooted, it starts giving the code 52 error. I can't install my iPhone drivers (through iTunes) or PS3 utilities because of this. I'm wondering what changes during the first reboot. I must also say that these very same drivers were used on the previous build of Win 7 HP that I was using except that it did not have SP1 integrated.

Has anyone had a similar experience? I know that the digital signature check can be disabled using bcdedit.exe but I want Windows 7 to work the way it should: it should stop me from using unsigned drivers while installing signed drivers correctly. Does any one have any clue to what's going on with my Win7 on my laptop?

Answer:Driver Digital Signature error when using signed drivers (Code 52)

Hi ajayav, Welcome to Sevenforums.

Boot into Advanced Boot Options and disable driver signing checking.

The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

Disabling driver signature enforcement has helped a lot of users in fixing the issue.

You may also delete the USB "Upper Filter" & "Lower Filter" Entry and check if that helps.

Before we go any further, please first backup the Registry.

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

1. Click “Start”, type “regedit” (without quotation marks) in the “Search” bar and press Enter.

Note: If UAC (User Account Control) pops up, please accept it.

2. Right click “Computer” (the root node) in the left pane, click “Export” under the “File” menu, choose “All” under “Export range”, and select “Desktop&... Read more

5 more replies
Relevance 62.32%

I've created a self-signed digital certificate as follow step:Start button-->Microsoft Office-->Microsoft Office Tools-->Digital Certificate for VBA Projects.1.How to delete the self-signed digital certificate after created?2.How to change the expiration date for the self-signed digital certificate? 

Answer:Delete a self-signed digital certificate

I'm assuming that the certificate didn't work which is why you want to delete it...More info on what you want to accomplish.

2 more replies
Relevance 62.32%

i'm workin wit a Intel(R) 82845G/GL/GE/PE/GV/ Graphics controller

I can't do nothing wit it,every time i tried too play gta vice city or some otha programs it says graphic card cant be find i'm curious,when i had xp i didnt had this problem and i just had this right when i upgrade..........how do i get my card digital signed?
 

Answer:My graphics card is Not Digital Signed......Pic

7 more replies
Relevance 61.5%

I scanned my computer with AVG (Which just recently has been acting funny), and I found and deleted a bunch of tracking cookies, but there were a hand full of files that I don't think were infected, but it said next to them that "The file is signed with a broken digital signature" Does anyone know what that means, and how to fix it?
Thanks! O h and most of those files were from C:\WINDOWS\Installer

Answer:What does it mean if a file is signed with a broken digital signature?

Per AVG this is for information only
The file is signed with a broken digital signature
The reported file was signed with a digital certificate ensuring its integrity. However due to changes to it, the certificate no longer corresponds with the content. This might happen when file is infected but also when it was incorrectly updated, broken due to some error or when the digital signature expired.
More http://free.avg.com/ww-en/faq.num-2677#num-2677#ixzz16tbadwcE
http://ask-leo.com/what_is_a_broken_...if_so_why.html
Make sure that you run a full, updated AVG scan
Download and run malwarebytes; full and upated scan
If all is negative, you are ok.
http://www.malwarebytes.org/mbam.php

9 more replies
Relevance 60.68%

i'm workin wit a Intel(R) 82845G/GL/GE/PE/GV/ Graphics controller

I can't do nothing wit it,every time i tried too play gta vice city or some otha programs it says graphic card cant be find i'm curious,when i had xp i didnt had this problem and i just had this right when i upgrade..........how do i get my card digital signed?
 

Answer:I install vista But my graphics card is not DIGITAL SIGNED....PIC

Hi,

It doesn't look like Intel have a Vista driver for that chip:

http://www.intel.com/support/graphics/intel845g/sb/cs-009082.htm

Time to go shopping my friend.
 

1 more replies
Relevance 60.27%

My AVG antivirus has detected a a file with a signed broken digital signature, issues by : DT Soft Ltd.
C:\Users|Denise|Desktop<Recovered programs and music<Downloads<DTLite4454-0315.exe (sorry somehow I have managed to activate the red keyboard items and don`t know how to inactivate them and get back to the normal keyboard items!)

Anyway, with this broken digital signature, I cannot get on to the internet and access my e-mail or open a file or anything. AVG does not have an option available to `remove selected`or `remove all` hence using laptop to send this message. Can`t even download the TSG SysInfo either to give you more details I`m afraid.

My main frame was recently upgraded to windows 7. I therefore have NOT been able to do the essentials like Hijack this, etc. before posting this message as am unable to use the keypad and get anywhere. Can`t type a single word, letters are repeated or missed and one cannot go back and try an insert or rewrite etc. In fact at this present moment in time, I cannot even get a single letter to appear when I use the keyboard!

Is there a way of getting rid of this with AVG or disabling it without having to type anything using the keyboard) so I am able to open the internet to connect to the forum and try and sort this out on said computerÉ

I am presently on the forum getting assistance from Jeff with my laptop,Windows Vista, for malware issues as well.
 

Answer:signed broken digital signature, keyboard totally inactive

Can I just delete this file from it`s location in the C drive as I cannot find it on my desktop for uninstalling or will it have attached to other programmes and filesÉ (question mark)!
 

1 more replies
Relevance 59.45%

Greetings,

A few days ago someone has e-mailed me and their e-mail in my inbox appeared with a red ribbon next to it. When I open it or preview it, I can read what they wrote and see that they also have a signature.asc attachment.

Our e-mail environment is an in-house hosted Microsoft Exchange setup. With instructions from Microsoft at https://office.microsoft.com/en-us/...ges-with-a-digital-signature-HP001230539.aspx I created a digital signature using Comodo. When I send a signed message, Outlook converts the message I wrote into an attachment, attaches it to a new e-mail with a blank body but with the Subject I wrote, and sends it to intended recipients.

How can I get it to sign messages without converting the whole e-mail message into an attachment and forcing recipients to open the attachment to read my message?

I want to know how, with Outlook 2010/2013 on Exchange, I can send messages that too have a signature.asc and receive the ribbon mark.
 

More replies
Relevance 54.12%

I'll try to keep this brief:

> Upgraded GFX cards to 2 x Asus EAH4980 (ATI Radeon HD4890 architecture) from NVidia 8800GTS

> Performed full format on HD and reinstalled Windows Vista X64 Home Premium as well as SP1 and SP2

> Installed chipset drivers etc.

> Installed bundled VGA drivers (8.592)

> Installed miscellaneous software/games

System was running very stable and performing well in Benchmarking tests and games. I then tried to update the VGA drivers to the latest versions, first from ATI's own website - Catalyst 9.8 with VGA driver displayed in Device Manager as 8.640 - and then from Asus' website - displayed as 8.630 in Device Manager.

No matter what drivers I update to I am met with BSOD errors as soon as I try to run any kind of media on my PC. The dump files/dxdiag info etc. is attached to this post.

Upon investigation I note that one driver is not loading and is listed as 'not digitally signed', namely

ATKDispLowFilter.sys

This driver is an AsusTek release. It appears to load ok before I perform these driver updates. I can find no reference to any issues with it either on Asus' forums or elsewhere so this doesn't appear to be a common problem.

I've tried to locate a signed version of the driver to no avail.

Any solution would be very much appreciated.

Phil



-----------------------------------------------------------------------

System Info:

Asus Rampage Formula MB
Intel Q9550 45nM
Nvidia 4x1... Read more

More replies
Relevance 54.12%

Hey guys can somebody please help me im trying to install a vodafone 3G modem on my HP Pavilion DV7 laptop but i cant it says driver not digitally signed. Im using windows 7 home premium 64 bit

Answer:driver not digitally signed

Hello Tokelo and welcome to the forums.

Your best bet is try this - Disable Driver Signing in Windows 7

I have not tried it myself but it may help.

Report back with your findings.

Lucky

1 more replies
Relevance 54.12%

I have been trying now to install drivers for my Panasonic Digital Camera, which installs itself as a ZIP drive (it uses a 3.5 100MB ZiP disk instead of memory cards), and Fusion Dazzle which is an analog to digital convereter. Both plug in via USB. They used to work perfectly until I had to reformat and reinstall Windows on my computer.

I now get an error message that it is missing certain files (which ARE on the system) and it is looking for "C:\PCLEUSB.drv". When I point it to the correct driver location I get an error message saying that this driver has not been digitally signed to be compatible for Windows XP and will now exit installation.

I am using the most current drivers from the manufacturer and they say that they are Windows compatible and I am the first to have this problem. So far, they have been unable to assist.

Any suggestions?
Ed
 

Answer:Driver not Windows XP signed

usually the program will ask you if you want to continue, I have never experienced where it just "exited" on it's own. I always continue regardless but it is up to the user.
 

2 more replies
Relevance 54.12%

PeerBlock is a fork of the popular Peer Guardian 2 software. Well the folks that are developing it have just received a legally signed driver for PeerBlock which means that it will run on Windows Vista and Windows 7 (32 & 64 bit) without the problems that were plaguing Peer Guardian 2.

You can check it out at PeerBlock Development

PeerBlock Free Download and Reviews - Fileforum

Answer:PeerBlock Now Has a Signed Driver

that software is false security

4 more replies
Relevance 54.12%

I recently got a docking station for my laptop (Dell precision M65 w/WinXP Pro SP3 all updates) and when I plugged it in (after all the plug-n-play stuff detected the new docking station stuff), the mouse plugged into the dock USB port would not work (it worked fine previously when plugged into the laptop USB port). I undocked and plugged the mouse back into the laptop's port but it still didn't work.

I went into the device management applet and and tried to update the driver. There was nothing under "Mice and other pointing devices" except the PS/2 touchpad. Under "Human Interface Devices" there was an entry called "HID-Compliant device" If I deleted that device and then did a "scan for hardware changes" I would get the "found new hardware" popup in the tray and then breifly see "Dell USB Optical Mouse" during which the mouse would work but within 2 or 3 seconds it would switch to "HID-Compliant device" and then inform me that my hardware was ready to use at which point the mouse stopped working.

After much screwing around with the device manager and various other USB mice, I found that I could use the "Update Driver" right-click menu item to force the driver to "HID-Compliant mouse" by bypassing all the "Automatic" stuff. This resuted in a working mouse, but I have to do this every time I turn on the laptop.

I have noticed that while following the dialogs during... Read more

More replies
Relevance 54.12%

Am trying to install HP Deskjet 630c printer and it keeps telling me this driver is not digitally signed. I just put Windows xp on the computer. What does this mean and can I get help? I am not very computer literate and any help would greatly appreciated. Many thanks Paula.

Answer:driver is not digitally signed

"Not digitally signed" means Microsoft have not tested this driver and verified it to be compatible with Win XP.  This does not mean it will not work, you should click on the "continue anyway" to install your print driver.  If this is a concern you should check the HP web site for newer driver tested by MS.Kim

1 more replies
Relevance 53.71%

Good evening,

I just reinstalled XP on a friends machine that was pooched. It is a Dell DIM4400. Everything is working except for the sound card. It is a built in sound card. When the computer boots up the new hardware wizard comes up asking for a driver for a realtek AC97 Audio device. I have tried everything I can to install the driver but each time I try I get an error that the driver is not digitally signed and it won't install. If I try in safe mode it installs but I get a blue screen upon startup and have to reboot. I do not have the orignial Dell cd but I have tried every driver from the Dell site that should work on this model of computer. I have updated the chip set drivers on the motherboard etc. I just can't get this sound card to work. Any advice??
 

More replies
Relevance 53.71%

I create a signed driver named fangcloud.sys, and signtool.exe to verify the driver like follow:
PS C:\Program Files (x86)\Windows Kits\10\bin\10.0.15063.0\x86> .\signtool.exe verify /v /pa D:\code\SyncNewVision\build
\windows\component\driver\64\win7\fangcloud.sys

Verifying: D:\code\SyncNewVision\build\windows\component\driver\64\win7\fangcloud.sys

Signature Index: 0 (Primary Signature)
Hash of file (sha1): 11C8FF8DD2070FA8A6EE7727007358812E26AA5A

Signing Certificate Chain:
    Issued to: VeriSign Class 3 Public Primary Certification Authority - G5
    Issued by: VeriSign Class 3 Public Primary Certification Authority - G5
    Expires:   Thu Jul 17 07:59:59 2036
    SHA1 hash: 4EB6D578499B1CCF5F581EAD56BE3D9B6744A5E5

        Issued to: Symantec Class 3 SHA256 Code Signing CA
        Issued by: VeriSign Class 3 Public Primary Certification Authority - G5
        Expires:   Sun Dec 10 07:59:59 2023
        SHA1 hash: 007790F6561DAD89B0BCD85585762495E358F8A5

            Issued to: Hangzhou Yifangyun Network Technology Co., Ltd.
            Issued by: Symantec Class 3 SHA256 Code Signing CA
            Expires:   Tue Aug 20 07:59:59 2019
            SHA1 hash: 12BA8EBB01FCA162472D6A6... Read more

More replies
Relevance 53.71%

Hi, I finally have my File System mini-filter driver working great, and tested it a lot on Vista 64-bit using the testsigning boot option. All was fine.

However, when I turn testsigning OFF and try to start the service (the driver), I get the StartService failed with 577 - windows cannot verify the digital signature. Note that the driver in INSTALLED, and the Registry is updated, etc. I just can't start the service (even when running as Admin).

It is signed using a Microsoft cross-certificate, based on the original certificate issued by GlobalSign, as directed in MSDN. You can examine the certificate using the driver's properties, and all looks fine.

I also tried installing the certificate, but that made no difference. This should all be correct, except that it doesn't work!! Any idea what is going on here? Any help would be greatly appreciated! I thought I was all done with this project, but since it doesn't work, I am currently screwed. THANKS!

More replies
Relevance 53.71%

G'day. I'm trying to install my old VisionPLus DVB-T card into a Windows 7 O/S box and it won't recognise any of the old drivers. When I try to install the TwinHan Digital tv software, Windows can't/ won't install them.

I've downloaded and tried the latest (DigitalTV 3.4 Build 19-02_20090212) and windows comes up with "Driver not found". I've tried to install in compatability mode but still no good.

When installing the above, it identifies my card as &#8220;PCI CX-87A with MCU DVB-S/-C/-T/ATSC card&#8221;.

Out of all the available drivers on Twinhan's site, which would be the best for my card?

Thanks
 

Answer:Driver not digitally signed so won't install

64bit Windows 7?

http://suffolk757.com/blog/2009/03/05/installing-unsigned-drivers-in-windows-7/

Out of all the available drivers on Twinhan's site, which would be the best for my card?
Click to expand...

The one written for Vista would be my choice, probably not one for W7 yet, may never be.

Looks like MS ha removed a way to disable unsigned drivers protection in Vista64, so probably is the same for 7
http://www.mydigitallife.info/2008/...-cause-drivers-not-found-in-64-bit-vista-x64/
The issue is known to affect PeerGuardian, TV tuner cards, Gigabit Ethernet adapters, CD/DVD-ROM/RW drives, and many other devices.Click to expand...

Looks like unsigned drivers are a no go for x64 Vista and Windows 7, well there are some workarounds in the article above, sounds like a hassle.
Not sure if this software will work with W7
http://www.tipandtrick.net/2008/per...iver-signature-signing-with-readydriver-plus/
 

3 more replies
Relevance 53.71%

I have NVIDIA GeForce 8800 GT with which I have had some driver issues. While checking the Driver details in Device Manager I noticed that some Driver files are not digitally signed. These are: C:\Windows\System32\nvcpl.cplC:\Windows\System32\nvcplui.exeC:\Windows\System32\nvcpluir.dllC:\Windows\System32\nvexpbar.dllCould this be causing problems with my drivers?

Answer:Driver files not digitally signed

It is my view that you should always download drivers form the Manufacturers website. To update your current drivers go hereclick here

3 more replies
Relevance 53.71%

My audio driver won't install b/c it's not signed. Anyway around this? I can't use the Vista driver b/c that didn't work for my surround sound on my mobo. ASUS has Win7 x64 drivers, but their not signed

Answer:My audio driver won't install b/c it's not signed -_-

Anyone know how I can get this installed?

9 more replies
Relevance 53.71%

Hey,

So I just upgrade to Vista x64 and 4GB of memory (courtesy of OCZ).

However, when installing the x64 version of MagicDisc/MagicISO I get the following error:

Can I get around this?
 

Answer:Required Digitally Signed Driver?

Uhmmm... yes, you can by pressing F8 at boot time and choosing to ignore the warnings about unsigned drivers, but you have to do it each and every time you boot. There is a way to permanently disable that driver signing requirement but I'm leery to give out the info anymore since it hosed a few people's machines recently.

It wasn't my fault that they chose to continue using shitty old drivers, but they blamed me for the mistake they made anyway.

Vista x64 is a more secure and stable OS than the 32 bit version, and that's one of the primary reasons why: the driver signing requirement. Disabling it or 'getting around it' will more than likely end up causing you issues at some point.

Google can find the specific method to disable the signing requirement permanently, or a search here might find it since it's been posted about 3 times over the past 4 months or so.

Good luck, either way...
 

5 more replies
Relevance 53.3%

OneDrive on my laptop is showing that I am not signed in. I have verified that I am signed into my Microsoft account, and I can access OneDrive online and on my phone.

Answer:Why is OneDrive on my laptop showing as not signed in when I am signed in on all other devices?

I'm not 100% sure, but I believe you might have to sign in separately on your laptop for it.

1 more replies
Relevance 52.89%

is it necessary to sign driver in win xp 32 sp2.

when i google i got that it is necessary for win vista , win7 and other upper version.

Answer:windows require a digitally signed driver xp 32 sp2

A signed driver is not necessary in Windows. It is an extra security layer, as drivers can become corrupt by malware. If you obtained the driver from a trusted source (like the device manufacturer's website), you can go ahead and tell Windows to install it.

3 more replies
Relevance 52.89%

I'd like to install a graphics card utility called RivaTuner but it requires that signed driver checking is disabled in Vista x64.

I'm running Vista x64 Service Pack 2, so how can I disable signed driver checking?

Answer:How can I disable signed driver checking in Vista x64 SP2?

Hello sofakng,
Try F8 on bootup and disable from there, i think this will work. Good luck and please post your results, thank's.

2 more replies
Relevance 52.89%

help !!!! i was uninstalling what i thought were unimportant stuff & accidentaly uninstalled my sound manager can anyone tell me where i can find a Windows XP digitally signed Realtek AC?97 driver

Answer:help i need a Windows XP digitally signed Realtek AC’97 driver

Hi mate,
check what make/model is your Motherboard, visit manufacturers web site and download sound driver for that type of Motherboard...

2 more replies
Relevance 52.89%

MAIN Problem #1:

Hi I'm wondering if anyone knows if i can find a Microsoft Certified Display adapter/video card driver (are those the same thing?) for my :
ASUS AGP-V7100 Geforce2 MX video card.

runnig win98/SE on a VIA chipset

The reason i ask is because when i look at my drivers through the DirectX diagnostic tool 's display tab it shows my driver as 'nvdisp.drv' and in the 'notes' sections adds :

" The file nvdisp.drv is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs. You may be able to get a signed driver from the manufacturer of the hardware device"

but when i look through the ASUS home page i can't find my video card. I know my driver is from NVIDIA and i've found the right page to update from them but i'm also wanting to update my chipset driver from VIA and they warn of compatibility problems with NVIDIA so i'm looking for a "signed" "certified" or "standard" adpater/driver?
[current driver listed as ASUS AGP-V7100 SDRAM v12.60 in the device manager]
**********************************
**********************************
Related probelm #2

The reason i'm updating my chipset driver is because i need to update my diplay adapter. And I'm updating that because i'm updating my direct X. All because i'm having compatibility problems with my new CD burner's "NERO" software (OEM ver... Read more

Answer:Certified/Signed display adapter/driver?

11 more replies
Relevance 52.89%

downloaded samsung magician and installed it. it started up and apparently i need some sort of digitally signed driver now?

"program compatibility assistant"

"samsung magician application resource
samsung india software operations

windows blocked installation of a digitally unsigned driver. uninstall the program that uses the driver, and control releasers website to get a signed version of the driver"

Answer:samsung magician need digitally signed driver

You don't need Magician for the drive to work just fine. You may not get all the advanced features, but the drive will be plenty fast.

1 more replies
Relevance 52.89%

Inatalled software from CD to run new Canon A560 digital camera. Unable to download from camera as the driver software is "not signed" (I'm using Windows XP).Can open Canon 'Zoombrowser' s/ware only to get cannot detect camera message - have tried other USB ports - no difference.Also get Msg: 3rd party INF does not contain digital signature information.contact with Canon - fruitlesscontact with Dell (XP OS installed on PC) - fruitless.Contact with PC advisor? - Please helpMuge

Answer:driver software for canon A560 not signed in XP

I should add to my previous thread that the camera works fine when connected to my laptop.Muge

3 more replies
Relevance 52.89%

downloaded samsung magician and installed it. it started up and apparently i need some sort of digitally signed driver now?

"program compatibility assistant"

"samsung magician application resource
samsung india software operations

windows blocked installation of a digitally unsigned driver. uninstall the program that uses the driver, and control releasers website to get a signed version of the driver"

Answer:samsung magician need digitally signed driver

You don't need Magician for the drive to work just fine. You may not get all the advanced features, but the drive will be plenty fast.

9 more replies
Relevance 52.89%

I'm trying to install a program, but I says I can't install an unsigned driver.






Quote:
Driver: CPU Core Temperature Monitor
Service: Logitech CPU Core Tempurature (not a typo)


I've tried Disable Driver Signature Enforcement in my bios, and DDISABLE_INTEGRITY_CHECKS in cmd.

Neither works.

Answer:Need to bypass digitally signed driver requirement.

Go to Start Menu > Run and type the following command: bcdedit /set nointegritychecks ON
Restart the PC and install the unsigned driver
After installation go to Start Menu > Run and type the following command: bcdedit /set nointegritychecks OFF
Restart your PC

4 more replies
Relevance 52.89%

If you have a computer that is running Windows 7 or Windows Server 2008 R2 and you install a driver that has a Windows Hardware Quality Labs (WHQL) or Authenticode signature on the computer.
But in Device Manager, when you expand the corresponding device, right-click the driver, and then click Properties and then click the Driver Details button on the Driver tab, you may find that the driver file is displayed as unsigned! This issue occurs because of incorrect logic when the Authenticode flag in the catalog file of the driver is checked.
To fix this issue download and apply this hotfix from KB2619914.

More replies
Relevance 52.89%

I recently purchased a new pc that came with win vista 64 bit premium home installed. I am now reloading all my old programs and I keep getting ?windows requires a digitally signed driver" error message. I also can't seem to play my old movie files, all of which played fine when I had Win XP. Apparently Vista does not want me to make my own decisions, so I am wondering how I might go about disabling all this extra secure vista crap. Can I go into Control panel and disable the BitLocker Drive Encryption? Or do I need uninstall 64bit and install the Vista 32 bit? Would that be a smooth transition? Would all my stuff work again if I had the less securitized 32bit Vista? Thanks for any help you may provide.
Regards,
William

Answer:windows requires digitally signed driver

Welcome to the Vista forums

1) You don't want to disable UAC (User Account Control) as it does a lot to protect your computer from various malware. If you really feel the urge to turn it off, then you can in control panel in the User Account section. Once turned off, you'll get the red shield in the bottom right saying it's disabled. Disable security warnings by opening security centre and going to "change how security centre warns me" or something and choose the "no warnings" option.

2) Just download the Vista codec pack (just Google it and you should find it) and DivX and you should have no problems watching videos.

3) You can install unsigned drivers on Vista 64 bit, do this by running an elevated command prompt (right click on command prompt in Start menu and click "run as administrator".

Type this and press enter bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS

When you reboot, you should be able to install unsigned drivers.
Also, I looked on the HP website for your computer, and it has 6GB RAM, so going to Vista 32bit would only allow you to use about 3.5GB RAM. I also saw it only has an Nvidia 6150e onboard graphic card. Are you using this? As if you upgraded this to a graphic card, you'd notice better performance on Vista as well.

2 more replies
Relevance 52.89%

Hi all,

please can someone help me.....

I am trying to install my Adaptec 1430SA controller card, for use with Win7 64bit, i have been trying for hours !

I have now got as far as windows seeing the right driver for the card, but windows refusing the driver because it is not digitally signed... i have downloaded the correct driver from adpatec.com ensuring it was the driver for use with win7 64 bit...

i dont know what i should do now, ive tried booting from an ms dos diskette and loading the drivers that way, but nothing seems to work....

PLEASE HELP ME !!!

Answer:HELP! Driver is NOT digitally signed for Adaptec 1430SA

Hi press F8 when windows is starting and you can deactivate it for the time you are on, alas you have to do
it each time you reboot. Have to go will try help later.

4 more replies
Relevance 52.89%

Hi

The last few times I started my computer, the system comes with the warning:

"Windows requires a digitally signed driver
Driver: Broadcom NetDetect Driver
Service: BASFND
Publisher: Broadcom Corporation
Location: C:\Program Files\Bra...\BASFND.sys"

Windows suggests to uninstall the program or device that uses this driver and check the publishers support site to get a digitally signed driver.

The problem is that I have no idea of which program or hardware is using this driver. All the drivers I have installed in my computer are from the computer manufacturer.
I have also been at Broadcoms homepage and there is plenty of things to download there. But I dont want to ruin anything.

Suggestions on what to do?

System: Windows Vista 64
 

Answer:Windows requires a digitally signed driver

Broadcom is your onboard ethernet, I don't see why it would suddenly complain unless there was an update.:confused You can disable driver signing but it only cures the symptom and not the cause.
 

2 more replies
Relevance 52.89%

I am having a heck of a time. I have installed Windows Vista Home Premium 64 Bit and the ASUS P5QC mobo I have came with an unsigned 64 bit Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
driver.

I called ASUS tech support and talked to them and as of this time, they have only a beta version of the 64 bit signed driver. Vista is not accepting the driver and is considering it as unsigned, so I am left without a computer that can connect to the net.

I have searched hi and low all over the internet to see if I could buy a wired ethernet adapter which has a 64 bit signed driver, but all of the ethernet cards I have been able to find are only compatible with the 32 bit version of Vista or they only have unsigned drivers for their ethernet cards. This is really frustrating!

Does anyone know here WHO (what manufacturer, make, model) of a wired ethernet adapter card 10/100 or 10/1000/1000 (that does not cost a fortune - is retail version, not industrial or commercial)
I might be able to purchase that has the appropriate signed drivers - or

Does anyone here know HOW to disable the signed driver enforcement in Vista Home Premium 64 Bit with SP1? I understand it was possible to do it at one time, but since Microsoft HEXED us with two patches, that route has been disabled. So if there is a way to disable the mandatory signed driver requirement, I would like a step by step explanation of how to do it, in lieu of the need to purchase a new card (my ASIS mobo comes with an UNSIGN... Read more

Answer:Vista 64 Bit Ethernet Signed Driver Trouble

Try Updating your BIOS. I have the ASUS P5QC mobo, and the wired connection works great with Vista Ultimate x64. Perhaps you have a bad mobo?

~Lordbob

27 more replies
Relevance 52.48%

Hello, I have Windows 10 (64 bit) and all the latest Windows + Lenovo updates. The SSD's are Samsung 850 EVO (system) and Samsung 840 EVO (data). Since a few weeks ago, I started seeing a pop-up message, whenever I boot the computer. It says that "A digitaly signed driver is required". Also, the Samsung Magician software reports, that AHCI Mode is deactivated and SATA Interface is N/A. Does that mean that my system is not running on full performance? And is there are solution for these issues? Thank you! 

More replies
Relevance 52.48%

Windows Vista x64 decided to implement a 'security measure' by which all drivers must be 'digitally signed' to be allowed to install and run. I have a program which is compatible with Vista and x64 bit operating systems, however as its drivers are not digitally signed I cannot run it correctly - I recieve the message 'Windows requires a digitally signed driver' and access to the driver is blocked.

Is there a method of bypassing this?

Answer:'Windows requires a digitally signed driver' - How can I bypass this?

When you boot your system hit F8 and you can bypass it there. You will have to do this every boot. There are a couple applications out there that will do this for you but the names escape me right now.

4 more replies
Relevance 52.48%

Hi all, Following device:ThinkPad E531Graphics: Intel HD 4000System: Win7 Pro Following problem:1) Approx. 2 month ago a windows update caused a problem with the hdmi at my laptop. There was no connection to the TV possible anymore (I tried the TV, the cable and the hdmi device already).2) I installed a new driver (origin: Lenovo support page). Result: Windows messages that the driver is not digitally signed...Hence, the device "vga save" was set. What I've already tried, everything as admin:1) look for older drivers: Got only one and it didn't work2) Tried to install a driver directly from Intel: Didn't work3) Tried to disable the signing (GPEdit.msc -  code signature ...). Here I had the problem that I even have no line with the code signature to set the ignore property4) Tried to install the drivers (Intel and Lenovo) in the testmode. The waring message about unsigned drivers came5) Tried to create a certificate. Here the cmd said the command is not known.6) Tried to install the drivers (Intel and Lenovo) after setting the "TESTSIGNING" off (BCDEdit). The waring message about unsigned drivers came My question:Any ideas or similar experiences?I can not believe that the Lenovo or Intel drivers are not signed. But why Windows does not accept them?Is the available update to Win10 an option? Generally: Failure F40 (the failure is 40 cm in front of the monitor) is not excluded  Thank you very much in advance.Regards,Stefan 

More replies
Relevance 52.48%

I tried to install Ati tray tools, I got the "signed driver" error notice, so I reboot press F8 and select Disable Signed Driver Checking and try to install again. Same error

I tried bcdedit and still doesn't work

Using Vista64 business SP1
 

Answer:Disable Signed Driver Checking doesn't work

There is a hotfix you have to uninstall

Uninstall hotfix KB938979 and then you should be able to disable driver signing via the F8 method, or the BCEdit method...
 

13 more replies
Relevance 52.48%

No, I'm not asking, how to... I'm telling you how to

In a shell with admin rights, enter:

bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS

and yes, it's DD... no typo. Reboot and enjoy.
 

Answer:Disabling signed driver enforcment in Vista x64 final

What? Don't you know Microsoft knows what's best for you? How dare you try to think for yourself!
 

24 more replies
Relevance 52.48%

My harddrive went out and I put a new one in. It was a brand new drive and I loaded Windows 7 Home Premium 64bit from my laptop's recovery disk that came with the inital purchase. When I started to add the drivers 2 of them came up as unable to verify the signatures. Most importantly the driver for my Wifi adapter, which is an Intel Wifi Link 1000 BGN says this. Windows refuses to run it in that state. So I have no internet and it says that the adapter is not installed or is disabled. When I go into the Device Manager the adapter is there with a yellow "!" and has an error code 52 (for unsigned driver). It shows installed and enabled though

I installed the driver from the intial driver disc and it says unsigned, I was able to get the latest driver from Intel's website and that too says it can't verify the digital signature.

When I boot into the F8 screen and disable driver enforcement I am able to get online.

I'm not sure if this is related or not, but regardless of how I boot, Windows updater and troubleshooters do not work.

I'd appreciate any help.

Answer:Asus recovery - Intel driver not signed (but worked before)

I'm having the exact same problem!! Please let me know if/how you got it fixed. Thanks!

3 more replies
Relevance 52.48%

I have x220 with Windows 7 Pro 64 bit. Device manager shows under Storage Controllers "Ricoh PCIe SDXC/MMC host controller," but there is a yellow triangle with "!" and a Device Status Code 52 message "Windows cannot verify the digital signature for the drivers required for this device." I checked in C:\Drivers\WIN\Multicard and found two *.cat files--which, I understand, are required to confirm digital signature. Each of them (ridisk.cat and risdxc.cat) has a signed and valid certificate! So what is going on? Will the card reader work? Is there something wrong with how Windows 7 is treating the Ricoh driver, which I downloaded from the Lenovo site? Why should I be getting this grief?













Solved!

Go to Solution.

Answer:Ricoh card reader driver-not digitally signed?

Hello,
 
Perhaps the driver is damaged?
 
Try deleting the Ricoh PCIe SDXC/MMC host controller from the Device Manager and then restarting the computer in order to let the Device Manager re-detect it and re-install the device drivers.  Does that solve the problem?
 
Regards,
 
Aryeh Goretsky
 

5 more replies
Relevance 52.48%

Hello,
I'm at my wits end. Anyone who can help would be my hero.

Acer 5253 laptop, Win7 Home Premium 64bit SP1, AMD C-50.

Trying to use a USB mouse. I have 3 logitech mice. None work because hidclass.sys and hidusb.sys are not digitally signed. If I f8 and disable driver signing enforcement, all 3 mice work, so I'm pretty certain that's the issue.

Tried "Update Driver" via device manager. Windows determined that I already had the best driver and wouldn't do anything.

Logitech does not furnish drivers for Win7. They rely on the native drivers.

Acer does not furnish mouse drivers. They refer you to the manufacturer of the mouse.

Tried copying the files in question from a 64bit machine that showed them to be digitally signed. Renamed the ones on my machine and pasted the ones from the "good" machine. Resolved nothing.

chkdsk /r found problems and repaired them. Didn't help.

sfc /scannow found problems that it could not resolve. Looked in CBS.log and found no references to either of the sys files in question. No resolution.

System Restore only had one restore point, and it was from 2 days ago. Problem was already noticed by then. I suspect that it's been this way since I purchased the laptop a couple of months ago anyway, but if there had been a restore point back at the very beginning, I'd have tried that.

I don't know much about digital signing of drivers. I've seen in a couple of threads that I might be able to sign the drivers myself, ... Read more

Answer:Windows mouse driver files not digitally signed

Mike

Obviously many more problems than just the mouse driver.

You can use earlier drivers (ie from vista, or even XP) if you install them in compatibility mode
[right click the installer>properties>compatibility>chose OS]

The other system problems need a repair install.

4 more replies
Relevance 52.48%

OK, I have come across 3 methods to disable driver signing with the bcdedit program on various websites:
bcdedit.exe /set testsigning on/off
bcdedit.exe /set nointegritychecks on/off
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS

What are the differences between them and which one should I use? Oh, how do you re-enable driver signing for the DDISABLE_INTEGRITY_CHECKS method, if I use it?
 

Answer:need help with enabling and disabling signed driver enforcement in vista 64

I'm using the last one and to re-enable it type: bcdedit /deletevalue loadoptions
 

2 more replies
Relevance 52.07%

Hi.I am having a Z580 (Windows 7 65 bit home premium) laptop.Recently I am experincing many problems with my wireless adapter.After a few seconds of switching on, wireless symbol will show "Limited Access". I will try troubleshooting, but the system will hang and i have to force it to shutdown.So I have un-installed the wireless driver and re-installed it. But now the same "Limited Access" happens and when i troubelshoot, (Reseting wireless adapter) the adapter goes off and it is shown that "Adapter is experiencing driver or hardware related problems". When i looked into device manager it is shown that ""This device cannot start .Code10"". Also when i checked the details, it is showing that "'the driver is not digitally signed"".Please help me solve this issue asap.

Answer:Wireless Adapter is not working (Code 10) "Driver is not digitally signed"

Update : If i put laptop in sleep after wireless becomes "Limited access"  after 10-15 mins if i reopen it, wifi is connected normally and it works! but for a period less than 10 mins.. After that again "Limited access" is coming and nothing will load!!! it is becoming a serious issue plz help

1 more replies
Relevance 52.07%

This is more of a bug report rather than a question.


When installing the latest version of Message Analyzer 1.4 (Build 4.0.8110.0) on a clean installation of Windows 10 Pro (Build 14393.222), it shows an error saying 'A Digitally Signed Driver Is Required' Message Analyzer -- WFP Callout Driver.
I'm guessing maybe due to the new driver signing requirements in Windows 10 1607 Anniversary Update...
https://blogs.msdn.microsoft.com/windows_hardware_certification/2016/07/26/driver-signing-changes-in-windows-10-version-1607/

More replies
Relevance 51.25%

windows 10 version 1607
after clean install ?
Samsung magician 4.9.7

Answer:does samsung magician show ahci disabled with signed driver error on

Does on mine, even though speccy etc all show it being on, must be a magician error.

14 more replies
Relevance 51.25%

When I downloaded/installed Everest Home Edition I got and error message shown in the attached image although Everest seems to work fine. How do I make Vista accept non-digitally signed drivers that I trust?This is on my HP 6715b in specs, Vista Business x64[regaining space - attachment deleted by admin]

Answer:Everest Home Edition download. Message = driver not digitally signed

To be on the safe side, reckon the download was ruined by some kind of malicious software. Perhaps on your system.Ask a friend to download it and see if he gets the same thing.EDIT:Just did download from the majorgeeks. Works on both XP and Vista. Scanned with Avast and no threat found.You have malware. Or a bad download.

8 more replies
Relevance 51.25%

H5321GW didnt have proper signed driver for Windows Server 2016. Why? On windows 10 the driver is working (Version 8.2.5.0 from 6/11/2015), i saved and pushed into the Windows Deployment System, but after under Windows Server 2016 didnt work, because of signature missing. When will be available updated driver for the mobile broadband?? .... And Bluetooth connect to PAN also dont have. (BTH\MS_BTHPAN)


























H5321GW.JPG ?73 KB

More replies
Relevance 51.25%

windows 10 version 1607
after clean install ?
Samsung magician 4.9.7

More replies
Relevance 50.84%

I have a problem with a RAID device. vista wont update it from the internet automatically so i used the my motehrboard cd to install it off. everything went ok and it installed well. the only problem was that when vista booted back up the driver wasnt digitally signed so vista wouldnt boot up into windows. i had to take out the hardrive and put it in as a slave and delete the files through xp. does anyone know where i can get this driver from that has been digitally signed?

Answer:silicon image sil3114 sata raid controller digitaly signed driver

Originally Posted by UKMach


I have a problem with a RAID device. vista wont update it from the internet automatically so i used the my motehrboard cd to install it off. everything went ok and it installed well. the only problem was that when vista booted back up the driver wasnt digitally signed so vista wouldnt boot up into windows. i had to take out the hardrive and put it in as a slave and delete the files through xp. does anyone know where i can get this driver from that has been digitally signed?




HI.
This it?s the good driver > http://www.siliconimage.com/docs/Si3..._x64_15100.zip < only you need install and then vista x64 uptade whit the new version.

Regard

2 more replies
Relevance 50.84%

Dear all, I don't find this driver on the Lenovo website.Please, could you help me to find the link? Thanks a lot,Kind regards,Manu

Answer:unable to find the signed driver ACPI/IBM00068 for T400 6475-U2G Win7 64x

i have the same problem but didn't get an answer...http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/ACPI-LEN0068-5-amp-2890D699-amp-0/m-p/93269...

2 more replies
Relevance 50.84%

Hi all,
I am wondering how do I digitally sign my driver so that it can be installed on a Win7 Ultimate SP1 in a VMWare virtual machine. I have used Visual Studio 2013 to sign my driver and cat files using a certificate I obtained from GlobalSign. Both of these
files passed the signtool check, but when trying to install in this virtual machine it generates an error code 52.
Thanks in advance for any help

More replies
Relevance 49.61%

This driver (or part of it) is not digitally signed, hence during silent install in SCCM TS Windows 7 x64 it will "hang" waiting to accept the unsigned driver (NOT during Apply drivers, but Sequence that runs setup.exe - I install ALL graphics drivers this way!)

http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=D4HM1
Had top revert to previous version
Intel HD, 5300, 5500, 6000, 515, 520, 530, P530, Iris 540 Graphics Driver, 20.19.15.4390, A05
to be able to do silent install!
Somebody else might have noticed?
Seb

More replies
Relevance 47.15%

Hello everyone.

Recently I kept getting this popup saying *A digitally signed driver is required*

How do I find out what program is using this unsigned driver to remove this popup?

Answer:How to solve "digitally signed driver is required"

Any warnings in Device Manager ?

more replies
Relevance 47.15%

Hello everyone.

Recently I kept getting this popup saying *A digitally signed driver is required*

How do I find out what program is using this unsigned driver to remove this popup?

Answer:How to solve "digitally signed driver is required"

Any warnings in Device Manager ?

0 more replies
Relevance 46.74%

Only been here an hour and already on to my second problem, lol.

So my only other problem is one little hardware adapter that has 64bit drivers... but they're not signed.

Is a "Syba" Serial to USB Adapter (SY-USB-S)...

basically I need to use it so that my battey backup can talk with Windows and give reports on power spikes etc... as well as control the shutdown of windows when I'm not around if there's a power outage.

Now, it's not a huge deal as the battery backup will still work of course, but the extra features won't work until Windows can communicate with it. Unfortunatly the backup only as a serial connection (and my motherboad doesn't) so I'm forced to use the "Serial (RS232) to USB" adapter.

So I'm wondering a few things.

1) can I force Vista x64 to use the unsigned driver from the company?

2) can I trick Vista x64 into thinking the driver is signed? (or someone mod the drive to that it is signed by me?)

3) Anyone know of a signed driver from another company that will work with this item? I assume a few companies use the same chip inside the device. All it does is make a bridge from USB to serial so it's a pretty simply device as well.

4) Anyone know of another Serial to USB adapter that has singed drivers that I could purchase to replace the current one?

Thanks again for any advice or help,
TK.

Answer:Vista x64 Driver "not signed" question...

Hi TK,

This will allow the unsigned driver to run in Vista. Hope it works for you.

- Allow Unsigned drivers to run

Shawn

10 more replies
Relevance 43.87%

I bought a crappy digital camera for vacation use so not to wreck my good one.. prob is I left the CD to install it.. I can't seem to find the drivers to download em, and the company JAZZ is apparently out of business...(no wonder it was so cheap)  anyone know where I can get em? tks

Answer:Driver for digital cam

Search it on google.Some other sites are:http://www.driverzone.com/http://www.drivers.com/http://www.driversdownload.com/

1 more replies
Relevance 43.46%

I have a new RCA (RP5030) digital recorder and want to download files to my hard drive. The instructions say to plug it in (USB cable included) and start dragging and dropping. However everytime I try to connect it, Ol' Sleepy wants me to find a driver for it. It didn't come with a CD and installing software/drivers is not mentioned in the user manual. I have tried several different approaches, connecting while the (desktop) computer is off and then booting up, and also connecting while the computer is already operational. Same result. I am still running Windows 98SE.

Suggestions? Thanks for the assist -
 

Answer:Driver for digital recorder?

Read here,

http://www.rcaaudiovideo.com/en-us/AppUtilitiesDriverUpgrade
 

2 more replies
Relevance 43.46%

Hi im looking for a driver for my fifital camcorder it is a SMART JVCAM LIXVS_660 i have had a look but can not see it anywere and my driver disk that i got with the camcroder is too scratched.Please help as i have no webcam nowthanxschaztait

Answer:Digital Cam Corder Driver

What has a webcam to do with a digital camcorder?

7 more replies
Relevance 43.46%

I want to install Dolby Digital Plus on my notebook, but I don't know which driver I need. Can you give me a link for downloading the right driver?                                                       Model: 15-r121ngProduct: K4C36A#ABD                                                       When i want to install Dolby Digital Plus, i get this error:  In english: The Doby Digital Plus-Audiodriver can not be startet. Restart your computer or install the driver again, if the problem continues.    I hope you can help me, you also can answer me in german  FabJoeHD

Answer:Dolby Digital Plus Driver please

Hi,Did your laptop audio come with Dolby audio technology built in?https://www.dolby.com/us/en/technologies/dolby-digital-plus.htmlI don't think your notebook speaker is tuned to dolby technology capability from factory, according to its specs.https://www.dolby.com/us/en/categories/pc.htmlOnly audio driver you can try to install is this:http://support.hp.com/us-en/drivers/selfservice/swdetails/HP-15-Notebook-PC-series/7234951/model/747...RegardsVisruth

1 more replies
Relevance 43.46%

Does any one know where i can get a driver for a Sampo DCE-211 digital camera that will work with Windows XP?

Answer:XP Digital Camera Driver.

click here might help, although they do not state which version of Windows the driver is for.It does not look good, though - see click here

10 more replies
Relevance 43.46%
Relevance 43.46%

hi! im pretty computer illiterate, so bear with me.
i bought a cheap-o digital camera from an online auction (1st mistake). the disc that it came with says it uses windows98, and i have windowsXP. i can install the program, but when i go to try and download the pictures from the camera, it says that it "cannot read the camera" because i do not have the correct driver for my usb. i beleive the software installed it for serial ports--it says it cannot install it for the usb.
i tried to contact both the software company (arcsoft) and the camera manufacturer (some crazy company called "master shine"), and i cannot seem to get help from either. can you tell me if/how to make this darn thing work? do i simply need to get the camera's usb line connect to the serial port? or, is there someplace i can get the correct driver for this?
the software that came with it is arcsoft photobase2.0 (requires windows98). the camera is the dg.cam from master shine international. my computer is a dell 4500s with windowsXP.
please help!!
 

Answer:need driver for my digital camera

Unfortunately, the camera will probably need an XP specific driver and if the manufacturer doesn't have one its probably not going to work.

EDIT:

you might try right clicking on the program and running it in compatability mode for windows 98
 

2 more replies
Relevance 43.46%

Hi I have a digital camera (Premier DS-5080) it is also a webcam. Unfortunately I have kind of lost the cd, now I can't use it as a webcam. Anyone know where I can get a driver for that?PC guy

Answer:Driver for Digital Camera

Trawl through this little lot may be a hrlpclick here)%22&sourceid=navclient-ff&ie=UTF-8&rlz=1B2GGGL_enGB206GB206

4 more replies
Relevance 43.46%

I recently bought a camera that uses DSCII as its driver. trouble is, SP2 will not accept it. Any ideas for a replacemnt/substitute?Alan Cox

Answer:Digital camera driver

When you loaded the Drivers did a box come up saying that it was not digitally signed Driver??? If so you should click YES not NO to carry on loading the drivers

10 more replies
Relevance 43.46%

I have a couple of regular digital cameras (Canon and Nikon) which are too big for me to carry around with me all the time. So for the last year I have been looking for a used small, thin camera just for that purpose. I have finally been given a Vivitar Vivicam 35 but I cannot find a driver for it - the neighbour (donor) no longer has the CD that came with it. I wrote to Vivitar Canada who was purchased by Sukor Limited asking for a driver and they replied that they have no Vivitar stock, accessories or information prior to the official date of their purchase of the Vivitar brand.

I know this is not the only Vivcam 35 in the world so I am sure that there is a Win 7 driver out there; I just simply cannot find it. Can anyone help, please? Thanks in advance and regards from Ottawa.

Answer:Driver for Digital Camera

I realized that there is a separate forum for drivers and that I should not have posted this here in the first place. So I have reposted it in "Drivers". Sorry for the inconvenience.

1 more replies
Relevance 43.46%

Since getting my Dell laptop with Vista 64 Bit I have had more problems with software. So many programs don't work on 64 bit. I wish I had known.
Now I can't use my digital piano as a midi device to record into the computer. They don't have any 64 bit drivers at this time!!!

Answer:No driver for Digital keyboard

Can you try to set compatability to XP?

Did you try to install it by Double Clicking on .exe file or by Right Clicking on the .exe file and using "Run as Administrator?

I am sure there are other ways to get around your problem but I am also a Vista Noob so, this is all I got at the moment.

5 more replies
Relevance 43.46%

I have recently invested in a DXG-308 Digital Camera. I have installed the necessary software that came with the camera, however, my computer says the driver is not installed. I have uninstalled and re-installed the driver but my computer won't recognize it. Is there a website I can download the driver from ( preferably free or low cost as I only paid $99 for the camera)? I am running Windows XP.
Thanks
 

Answer:DXG-308 Digital Camera Driver

Looks like you are not the only person having trouble........see some of these other posts.
http://forums.techguy.org/t402618&highlight=DXG-308.html

http://forums.techguy.org/t400246&highlight=DXG-308.html

http://forums.techguy.org/t409722&highlight=DXG-308.html
 

1 more replies
Relevance 43.05%

Does anyone know where I can find drivers for a 2004 Panasonic DMC-LC50 Lumix digital camera? It doesn't seem to be on the manufacturers site.
 

Answer:Solved: digital camera driver

7 more replies
Relevance 43.05%

have recently purchased a JVC GR-DX28EK video camera, second hand it came with no disc ! i cant connect to my pc (XP pro) without driver, have searched driverguide.com with no joy, can anyone please help/advise.thanksyozzer

Answer:JVC digital video camera - need driver, help !!!!!

Maybe click hereor hereclick here

6 more replies
Relevance 43.05%

I had installed an HP DeskJet F4280 All-in-One printer and recently discovered that one of the printer drivers has no digital signature.

---> C:\WINDOWS\system32\difxapi.dll

All the rest of them were listed with full signatures. Any ideas as what to do in regards to this issue? All help would be greatly appreciated.

Answer:Printer driver digital signatures

Are there problems with the printing?

My difxapi.dll driver is not digitally signed ,but my windows 7 is - Microsoft Community

More pages on https://www.google.com/search?site=&....0.mG7bE2Z26T8

1 more replies
Relevance 43.05%

Hi, Ive been searching and searching for a driver for my TwinHan card and most fail to install on my Vista RC1 x64 setup.

After many weeks trying to figure out the problem, I have altered the TwinHan BDA drivers and they "actually work", the biggest problem being that it requires you to disable the "forced signed driver" in the F8 bootup menu.

As far as I know they don't actually work in Windows Media Center, but I have also found a way around that too.

This:
http://www.twinhan.com/files/driver/...ld%2002-02.zip

is the new Beta software released by TwinHan, and it actually works with Vista !!

Here they are:
Twinhan DVB-T x64 Vista Drivers Modified.zip

Enjoy


ps. DONT FORGET TO DISABLE THE FORCED SIGNATURES BEFORE AND AFTER THE INSTALLATION OF THE DRIVERS!!!!!!

Answer:Twinhan DVB-T 878 Digital Tuner x64 Driver

If I install these drivers on Home Premium, the Vista control panel no longer works. You see the window opening but immediately closing again. If I undo the install all's well again but then I can't watch TV.

26 more replies
Relevance 43.05%

I,m trying to install my driver disk for my camera but my pc isn't reading it, what else can I do?
 

Answer:digital camera driver disk

The make and model of the camera and the operating system you are using would be of great help.

What happens if you plug the camera in to the computer with the cord that should have come with it?
 

1 more replies
Relevance 43.05%

For some reason, the mute and volume keys on this keyboard suddenly stopped working and I have been unable to find anywhere to download the correct drivers again; yes even from MS website. Perhpas there's a simpler soplution beause everything else on the keyboard still works. Only the mute and volume keys stopped working. If you have a solution for this problem, it would be very much appreciated. I'm using an XP platform. Thanks.
[email protected]

 

Answer:MS Digital Media Pro Keyboard Driver

http://www.microsoft.com/hardware/download/download.aspx?category=mk
The software is called intellitype.
 

3 more replies
Relevance 43.05%

My AWESOME 2.1 speaker set from Microsoft, called the model 80, has worked just fine in all other operating systems.
But now with Win7, it only shows up in Device Manager but not with correct driver.
What can I do? I've spent hours chasing down Google's suggested sites for this problem but found nothing that helps.

Thanks.

More replies
Relevance 43.05%

Where can I find drivers for my JVC Camera?

Answer:JVC GR-DVL 160 Digital video camera driver

Hi, try click hereCheers.

2 more replies
Relevance 43.05%

I just realized that I posted this message in the wrong forum and am now posting it again here because I don't know how to simply move it. Sorry!

I have a couple of regular digital cameras (Canon and Nikon) which are too big for me to carry around with me all the time. So for the last year I have been looking for a used small, thin camera just for that purpose. I have finally been given a Vivitar Vivicam 35 but I cannot find a driver for it - the neighbour (donor) no longer has the CD that came with it. I wrote to Vivitar Canada who was purchased by Sukor Limited asking for a driver and they replied that they have no Vivitar stock, accessories or information prior to the official date of their purchase of the Vivitar brand.

I know this is not the only Vivcam 35 in the world so I am sure that there is a Win 7 driver out there; I just simply cannot find it. Can anyone help, please? Thanks in advance and regards from Ottawa.

Answer:Driver for Vivicam 35 digital camera

You actually need the Camera software DVD which will have the necessary drivers on it. I does seem that finding that may be very difficult.
You may be better off looking around for a current Compact Camera.

3 more replies
Relevance 43.05%
Relevance 43.05%

I have a digital camera that i bought cheap at odd lots. it has a mini LCD that is basic with no live view or review. the camera can function as a web cam to. it's slender and about 6inches tall. it has the words digital on it. does anyone know the name of the camera or the manufacturer?
 

Answer:Digital Camera Driver issues

Look for the FCC ID number. It should be a small tag that is either on the unit or in the battery compartment.

You may then be able to go to http://www.driverguide.com and see if any of the drivers there have that FCC ID number.
 

1 more replies
Relevance 43.05%

Hi everyone - the files that I downloaded for this monitor include both analogue and digital drivers however the digital one doesn't appear in the compatible hardware list. So I tried the analogue driver but I get a horrid flicker with only 59 and 60 Hz refresh rates available, so I turned off the show hardware compatible tick in order to then be able to utilise the digital driver, and its better but still there's a flicker.
Does anyone have any ideas what I could do??
Many thanks

Answer:SyncMaster 245B digital driver

Hi piersonal,

First, could you please fill out your system specs as completely as possible? The more information the better. Minimum additional info would be 32- or 64-bit Windows 7 and what edition, your video card model, and any antivirus software you may have installed.

Second, it sounds like those are not the proper drivers for you. Could you please give us a link to the web page from which you downloaded them?

Cheers,

Walker
Windows Outreach Team

4 more replies
Relevance 43.05%

I recently acquired a "Firefly" USB/AC Adapter to Sata PCB and cannot find the drivers for it anywhere! This is a small circut board that attaches to any 3.0 sata drive and connects to your PC via USB. I would love to get this working on my XP system. I believe that it was manufactured by Western Digital who has no drivers available online. Part #4060-705014-004 Rev. A. On the other side of the board is the same number except the 4060 is shown as 4061. Any help would be appreciated. Thanks In Advance!!
 

Answer:Western Digital Firefly Driver!!!!

Haven't seen a pic but I think I know what it sort of looks like...and I think it probably doesn't have drivers...everything should be in the PCB firware to convert and run out to a USB port. I have similar products that convert from SATA to USB and they don't need any drivers; just a USB-aware OS. Otherwise we'd all need a lot of drivers for all our external drives in addition to the USB mass storage driver.
 

2 more replies
Relevance 43.05%

Hi,

I'm trying to find an update to this driver but I can't find one that works. I downloaded some from google searches but after they install the program pops up an error message that says "Error! Driver not found. Please reboot and run this install again." When I run it again I get the same error.

I used a program called Everest to generate an .HTM file that has my hardware layout (motherboard, devices, etc...) that I'll include in a .ZIP file. I'll also include the DxDiag log. If anyone could help I'd appreciate it immensely!

Let me know if there's any more information I can provide to help.

Answer:SoundMAX Digital Audio Driver

it took me about an hour to find this. i hope it helps you.

http://esupport.sony.com/perl/swu-li...ing&SelectOS=7

1 more replies
Relevance 43.05%

Does anyone have Dynavision digital camera, model number DS880A.It's a small digi/web cam and i need the drivers for it.Did a search on the net and found the manufacturers site but the twain drivers they have there dont seem to work. After downloading the file to my computer, i tried to install it using the "add new hardware wizard"/"install new drivers wizard" but the wizard was looking for an "ini" file and the folder that came as the download called "cybercam" only contained a "DSCAM.dll" file and a "DSCAM.ds" file.
Are any of those the driver file I'm looking for and why wont it load up?
Many thanks in advance to all or any that can help me.
Kaiwaka
 

More replies
Relevance 43.05%

I installed Windows 2000 over 98, and my digital camera driver messed up. It seems to be no where. It's a digital FUJIFinePix1300. I have a disc, but seem to have misplaced the directions. Any help would be extrememly appreciated. It is compatible with 2000, it says so on the disc. Any help setting up the driver, etc. would be greatly appreciated. Please email me: [email protected]


Matt
 

Answer:Fuji Digital Camera Driver

Same thing happend with me. Installation of all drivers are different. I would go to there web site and the directions should be there? Good Luck
 

1 more replies
Relevance 43.05%

I have tried to load the driver from the installation disk for a Premier DC520 camera onto my PC running XP profesional. However it wont load & I get the following error message
"The file
C:\WINDOWS\twain_32\DC520\UNWISE.EXE could not be opened. Please check that your disk is not full and that you have access to the destination directory."
I have also tried to load the latest driver on the Pretec website V2.00 twain driver but I still get the same error.
I have 1Gb available on the hard drive.
Please help!
 

More replies
Relevance 43.05%

I have the M318B View Quest digital Video driver and would like to use it with Vista Home P but can't find a vista driver for it. ANy suggestions how I can get the device to work with my Vista?

More replies
Relevance 43.05%

Thought maybe this would be of some help for updating drivers that will work with Vista.

http://www.dcviews.com/press/Windows-Vista-Compatibility.htm
 

Answer:Digital Cameras (Driver Updates)

8 more replies
Relevance 43.05%

I am trying to use my digital concepts cr-70r card reader in Windows 7 and it is not being recognized. Anyone know of an available driver? Thanks

Answer:Digital Concepts Driver Needed

  
Quote: Originally Posted by dmrob99


I am trying to use my digital concepts cr-70r card reader in Windows 7 and it is not being recognized. Anyone know of an available driver? Thanks


Can you go to the website and check it out?

6 more replies
Relevance 43.05%

Anyone got a clue where i might find the driver for a Digital TV DVB-T USB Adapter/Dongle?http://www.amazon.co.uk/Digital-Adapter-Dongle-Freeview-receiver/dp/B000OF1EJM/ref=sr_1_1?ie=UTF8&s=electronics&qid=1208785266&sr=1-1Bought it off Amazon a few months ago and lost the driver CD. I found plenty of TV tuner programs but no driver for XP sp2.

More replies