Computer Support Forum

HueyPRO Calibration Application download?

Question: HueyPRO Calibration Application download?

I have just installed windows 7 on my W700 and was installing all the drivers and utilities. but it seems that the HueyPRO Calibration Application is not aviliable for download somehow? it said "No available downloads" ?http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70503#changes I kind of need the colour calibration to carry on my day to day work as a photographer...

Relevance 100%
Preferred Solution: HueyPRO Calibration Application download?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: HueyPRO Calibration Application download?

I second this.

2 more replies
Relevance 76.85%

I updated to Windows 8 pre-release and now to Windows 8.1 but have not been able to use the built in color calibration for my ThinkPad W510 4318-CTO.  Will drivers be available?

More replies
Relevance 85.28%

Hi! I have had a W700ds for 2 years now and HueyPro color calibration always worked like a dream. When I did the usual two-weekly calibration a few days ago, the result was way too green. I tried it again, installed the latest version of HueyPro, reset HueyPro, etc., but the same greenish color remains. Is it that my color sensor has given up the ghost? Anyone had the same problem and what was the solution? Thanks in advance.

Answer:HueyPro color calibration too green on W700ds

Roemrijkewolf, the sensor may have gone bad, which happens in some cases. On my W700, the screen has a visibly greenish cast if I switch off the calibrated results within the huey PRO software. Call tech support.I recommend that you read this before having your ThinkPad serviced. If you're familiar with doing electronic repairs yourself and want Lenovo to just send you the part, it's a fairly straightforward repair, and the procedure is in the W700ds "Hardware Maintenance Manual." They'll probably send you a new palmrest.Also, by now, many of the little air intake slots (each about 5mm, or just under 1/4" long) on the underside of your laptop are probably clogged with dust. You can see this with a flashlight and magnifying glass, particularly if you look at the patch of slots in the rear corners of the underside of the machine (that's where the two fans are). I recommend that you turn the laptop off, disconnect it from everything, close the lid, flip it over onto a cushioned surface, attach a crevice tool to your vacuum cleaner, and use that to suck the dust OUT OF ONLY those little vent slots on the bottom surface of the laptop. That helps keep the laptop's cooling system running at maximum efficiency. NEVER use compressed air to blow the dust INTO the laptop, because you don't want all that dust on the inside where it can cause problems.Good luck!

4 more replies
Relevance 85.28%

HI dudes I got my W700DS 2757 E9J. My latop have panColsensor with HueyPRO software.After  reinstalled the vista  ultimate  64 system.it dont work.I download the HueyPRO 1.16 and run it. when I shut down the cover of lotap ,the colour Calibration  will not happen,and all computer is totally going sleep. I am waiting for a long time,it is still nothing happen.I try so many time,but every time the machine is go to sleep. is there anyone can help me ? thanks a lot !!  

Answer:HELP HELP FOR ThinkPad W700 Color Calibration (HueyPRO)

I have exactly the same problem.  I change the Power Option setting to "Do Nothing" when the lid closes and now the system does not sleep.  But HueyPRO keeps waiting for the lid to close.

9 more replies
Relevance 59.04%

Hello, everyone.
I am an illustrator, working with a partner, printing our illustrations on greeting cards, prints, magnets and the like. We're using some low-end equipment because, as artists, we are doing our required amount of suffering before we make it big (I hope).
We use, mostly, Adobe Photoshop for image prep, then Illustrator to put out the final product. 99.9% of our work is in rich color, so we're trying to get as much out of a 6-head Epson printer as possible.
I've noticed differences between the printed result and what appears on screen since I switched printers about 3 months ago. I am familiar with the differences between RGB and CMYK models, the additive and subtractive princples in printing.
I know there's a way to bring the printer around to be more in line with what the monitor shows and have just discovered Adobe Gamma, but have never used it.
Most of the literature I've read so far talks about "profiles", but I haven't seen any real "how-to" instructions.
Is someone able to direct me to a site or information so I can put it all together?
I'd really appreciate the help.
Thanks!
 

Answer:Monitor, printer, application calibration

6 more replies
Relevance 54.12%

Hey, I am trying to troubleshoot why my touchscreen is not working. However, the drivers from dell's site -  is protected by password. How do I even update the drivers?!

More replies
Relevance 52.07%

I went and ran the built in color calibration tool in Windows 10 to adjust gamma, brightness, contrast etc but I want to restore this back to what it was before I ran this calibration tool. How do I do that? There does not seem to be an obvious "Restore Default" button anywhere.

Do I simply delete / remove the Profile listed in the box under Start-Settings-Colour Management and maybe untick the box "Use my settings for this device"?

Thanks.

Answer:Windows color calibration tool and resetting calibration

During color calibration you may have made changes to brightness and contrast outside windows using your monitor display menu.

Open your monitor menu from the controls on your monitor and find default or Auto settings there and reset defaults from there.

Then you can delete your profile, and proceed to recalibrate if necessary.

2 more replies
Relevance 51.25%
Question: Hueypro color cast

Greetings,I bought the w700ds about 10 months ago with XP. Everything worked like a charm. I then installed windows 7 (finally a worthy replacement) and then the problems came with hueypro. It could not evn install then it could not even calibrate. When I heard I had to install the bios drivers I did and it worked. BUT now, instead of calibrating, it pretty much destroys the colors, it gives me a nasty magenta cast. Can somebody help me? Do i need to install another specific driver? Thanks and take care

Answer:Hueypro color cast

On W701 I had same problem with magenta cast when I calibrated in wide gamut mode. I fixed by switching to sRGB mode (Control panel/Display/Change display settings/Advance settings/Monitor Color), and then calibrating.Not sure if this will be relevant to W700ds since display there is not wide gamut though...

2 more replies
Relevance 51.25%

I received my X220T a couple of weeks ago, one of the standard configurations (i7, Win 7-64bit).  I'm looking to improve the pen calibration.  It's not bad, but there are some regions of the screen where the pen tip doesn't line up well with the cursor. The only calibration I can seem to access is the 4-point calibration.  With previous tablets running Windows 7, when I reset the calibration I would get the 16-point calibration but that doesn't seem to work here.  I only get the 4-point calibration, which improves the calibration marginally.  Is there a way to get to the 16-point calibration or another method to improve the calibration? Thanks,Dave 

Answer:X220T pen/screen calibration - where is 16-point calibration?

I found that pressing the Reset button which is next to Calibration did the trick. However the calibration on my tablet is still off near some of the edges.

9 more replies
Relevance 50.84%

I am a photographer and purchased the W700 so I could perform accurate on site edits and upload them to the wire services I shoot for. After running hueyPRO the result is a strong magenta cast not even close to the same settings on a higher end Spectra view II program I use on my desktop that is nearly perfect.  If I switch back to normal the color is too cool. I will be sitting next to dozens of professional photographers Saturday at an NCAA Division I game and again Sunday at an NFL game with the largest screen in the media room representing Lenovo and the reception will not be positive. Lenovo support tells me to call x-rite-Pantone for support.  I suppose I can try that Monday but this weekend will have me submitting images I can only guess are close to accurate color. I post on this forum but am not sure why since there doesn't seem to be any Lenovo response here either. After receiving my brand new W700 that had the BSOD before I could even complete initial setup I sent it into Lenovo for repair.  My brand new system required the following parts replaced; 42W8202              VGA CARD GLM2 W EMI MYLAR45N6098               Structure FRAME17.042W8199              PLANAR FOR MXM SUPPORT W TPM W45N5411      &... Read more

More replies
Relevance 50.43%

I took delivery of a brand new W510 unfortunatley quality control seems to be down the tubes. 1) The hueyPRO does not work ... there is an unknown USB device that windows is unable to load any drivers for (not sure if this is the hueyPRO) .... before you ask the hueyPRO software is installed. I have tried to get it to work with both the original Lenovo install disk and a clean install of everything ... nothing works  2) I also asked for a RAID option (but not enabled) the system board that shipped does not have the RAID option on it  The end result they are shipping me a new keyboard bezzel and a new system board .... for a machine less than 24 hours old ... how does this get thru quality control ???

More replies
Relevance 50.43%

Hello, I formatted my pc new W530. I am looking for software hueyPRO Pantone and the driver of the cart ? I am very satisfied with the  pc   Thank you ps : Sorry for English, I am French 

Answer:w530 seek driver hueyPro color

Hi,
 
i have W530 and i made a clean install of Windows 7 pro, becouse of bloatware in lenovo install. Evereything is working, but i cant find phantom software fot x-rite color calibrator for W530. Where is it? I have tried to install W520 Phantom calibrator software v 1.0.0, but im getting error:
"Error trying connecting to measurement device. Please call technica support."
 
The problem is that lenovo has no technical support for their high end products - except those funny people that now nothing about thinkpad notebooks :/ I`ve tried to send email to support, but i got reply saying - email account out of quota Quite irrytating.
 
Can anyone point link to phantom calibration software for w530 ? I think this soft from w520 doesnt match w530 and therefore im getting error.
 
Moderator Note; post merged, subject edited

3 more replies
Relevance 49.61%

any idea ?..
My Free Download Manager can't download any EXE file. Every i clicked download the status always showed message that "*.exe - Stopped"

Answer:Download Manager can't download any application file

VIRUS REMOVAL / PROTECTION 1. Download MalwareBytes. Malwarebytes
2. Disconnect from the Internet.
3. Disable your present antivirus software.
4. Remove your present antivirus software.
5. Install and run the MalwareBytes Quick Scan (remove any bad guys)
6. Reconnect to Internet.
7. Update MalwareBytes.
8. Run malwarebytes quick scan again.(remove any bad guys)
9. Download and Install Microsoft Security Essentials.
http://www.microsoft.com/security_essentials/

Now I advise you disable MalwareBytes and only enable again when and if you need it..

1 more replies
Relevance 45.1%

I was attempting to download iTune 7.5 and when I clicked the download button the appeared over my mouse arrow a windows like ikon with a red circle with a slash through it. I disconnected Zonealarm and it still happened. I tried it on my wireless laptop with vista and it downloaded fine. What's up. Thanks in advance.

Bill
 

Answer:Cannot download an application

What browser are you using?
What version Of iTunes Do you currently Have?
If you have iTunes 7+, try using the "apple Software update" that gets installed in the start Menu.
 

2 more replies
Relevance 45.1%

Why did I get a pop-up from Microsoft for "make msn my homepage?" msn.com is and has been my homepage. Scam or what. They offered to download and "run" an application.Thanks for your help.CoffeeBreakmessage edited by CoffeeBreak

More replies
Relevance 45.1%

any *.exe application file i try to download, the dialog box says you have choosen to open *.exe which is a : Binary File

Answer:when i try to download an application it is d

Not sure what you are trying to do. You want to Save the EXE without opening it ???I have not done that in awhile. But Right Click on the EXE, then click 'Save As...' or may say 'Save Link As...' or may say 'Save Link Target As ...'

3 more replies
Relevance 44.69%

I have HP desktop. An app popped up to download HP Advisor. Once it started downloading
it has not stopped. The icon , a box appears on screen (loading HP Advisory) and been there for
months. Cannot get it off. Called HP they will not help me. How can I get this off my computer
screen?
 

Answer:Remove download application

Can you attempt a system restore?
 

3 more replies
Relevance 44.69%

Error! Could not download application! Please try again!

I get this message every time I log in. How can I find out
what it is reffering to, or make it stop coming up?

Thanks,

Blue ray

Answer:Error! Could not download application! Please try again!

Welcome to TSF Blue Ray.............

Is this your own personal machine or a company machine that's connected to a network?

4 more replies
Relevance 44.69%

I am connected to the Internet with HughesNet. They have a limit on the download amount - 425 Mb per day. My Hughes usage shows me that every day at 1 AM approximately 100-120 Mb is being downloaded on my PC. I do not do anything at this time. Can someone please give me an advice on how can I monitor which application downloads these data and maybe from which IP address. I looked at many softwares (Bandwidth Monitor, etc) but they can show me the usage, but unfortunately not the application that initiates it. Your help would be appreciated.
 

Answer:Need application download monitoring

Welcome to TSG.
I assume you don't have an antivirus program updating or Windows, set for overnight?
Why don't you shut down the computer? Next time you start, sometimes it gives an error, that something didn't run and needs now updating. If nothing is showing, you might have a virus hiding and will have to check your computer under the Malware removal Section.
Unless some expert for networking is able to tell more (I also wish there would be a program to log, what is going on, would be good) I'd rather unplug everything, when I am not at the computer.
 

1 more replies
Relevance 44.69%

Application download did not succeed. Check your network connection, or contact your system administrator or network service provider. That what a family member of mine gets when they try to download anything off of the internet. Its old probably running windows xp or older. Anyone know what the problem is and how to fix it, hits on Google dont explain, only for this one click thing

I know this is windows 7 forum but maybe it pertains to us also

Answer:Application download did not succeed

Come on

5 more replies
Relevance 44.69%

I want to find out how much I actually download from the net in a month inorder to see if I really need an unlimited ISP or say a 3 GB per month deal.Any freeware to do this people know of?

Answer:Download measuring application

Down to home. click hereTautology meter. click here

2 more replies
Relevance 44.69%

Hello all....

Scanned my HD-no boot sector virus-reinstalled XP on a clean partition; loaded Mobo drivers-all working good; updated windows xp (51 updates)
Of course, I restarted after each of the above. Total boot time, from dead screen to log in screen is 27 secs, pretty good.

My XP disk was damaged, apparently, because this is the fourth time I've installed it and the first flawless install!

Until SP2. I remembered to run the Prescott Hotfix and restarted. My SP 2 disk said something about a "corrupt file" so I went to Microsoft and downloaded it instead. After 111 Mb, it started to install, then I got the following error message:

Update.exe Application Error

The instruction 0x77f83905 referenced memory at "0x00000000". The memory could not be written. Click ok to terminate the program.

Microsoft recommends trying to reinstall, but if things are already goofed up.....
I suppose I could go to Add/Remove Programs and see if SP2 is there; then I could remove it and try again.

Not expecting a reply given the hour, but you never know.....

Actually, I'm pretty happy. This thing has never worked better!

BTW-I haven't installed Office or any other progs except Adaware and AVG until I'm sure this is a good install.

Thanks again
jtone
 

Answer:Application Error after SP2 Download

Exit AVG completely, just don't disable it. Now try to install SP2.
 

2 more replies
Relevance 43.87%

I keep getting this error. 2503, 2502, and 1603. It happens everytime I try to install skype. I do not have the windows installer file, the only closely related item is LoJackinstaller. I change all the permissions, upgrade to windows 7 pro, everything but it won't install skype. Also I tried downloading and installing windows installer 3.1 but it said that I have run out of storgae room and the installation failed.
Its also only gives me the 2503,2502, and 1603 errors when I try and install Skype. I download and installed chrome and several other programs just fine.

Answer:errorr 2503 while trying to download application

Some possibilities here: Software Updates produce error codes 2503 and 2502 - Microsoft Answers

4 more replies
Relevance 43.87%

For any Links that are meant to automatically send me to a URL, I click them, something comes up (I'm assumeing it's from Internet Explorer), and then closes itself again, and it acts asif nothing has happened.

The error code which I always get is:

Unable to Execute File:
http://(URL HERE).com

ShellExecuteEx failed; code -2147418133
Catastrophic Failure

I'd also note the fact that Internet Explorer refuses to open. Completely.

Answer:Unable to go to any links from a Application/Download

Try resetting Internet Explorer. How to reset Internet Explorer settings

If you can't open IE try this http://go.microsoft.com/?linkid=9646978

1 more replies
Relevance 43.87%

This morning I downloaded (2 hours!) Easy-PhotPrint V3.30 from the Canon Software Center, Europe, but when I tried to open it I got the message that it was not a WIN32 application. So I tried again - another 2 hours - with the same lack of success. Obviously I downloaded the version suitable for Windows XP. Any suggestions as to a way foward? Thank you.

Answer:Download apparently is 'not a WIN32 application'

r u using a download manager by any chance if so diable it and download through windows downloader

2 more replies
Relevance 43.87%

hello,

It's all started when google chrome browser stoped working and a suggested solution was to check my firewall and add google chrom to allow list and I did but it didn't work anyway, so I deleted the google crhome and tried to reinstall it but i got this message "application download did not succed" and:
" PLATFORM VERSION INFO
Windows : 6.1.7601.65536 (Win32NT)
Common Language Runtime : 4.0.30319.296
System.Deployment.dll : 4.0.30319.1 (RTMRel.030319-0100)
clr.dll : 4.0.30319.296 (RTMGDR.030319-2900)
dfdll.dll : 4.0.30319.1 (RTMRel.030319-0100)
dfshim.dll : 4.0.31106.0 (Main.031106-0000)
SOURCES
Deployment url : https://dl.google.com/update2/1.3.21...defaultbrowser
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of https://dl.google.com/update2/1.3.21...defaultbrowser resulted in exception. Following failure messages were detected:
+ Downloading https://dl.google.com/update2/1.3.21...defaultbrowser did not succeed.
+ Unable to connect to the remote server
+ An attempt was made to access a socket in a way forbidden by its access permissions [2404:6800:4001:c01::be]:443
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [4/19/2013 4:33:32 PM] : Activation of https://dl.google.com/update2/1.3.21...defaultbrowser has started.
ERROR DETAILS
Following errors were detected during this op... Read more

Answer:application download did not succed, any suggestions?

Welcome to Seven Forums Leena. How did you delete chrome? Did you use it's own uninstaller? From windows Features?

You can try manually removing all traces

Manually uninstall Google Chrome in Windows - Google Chrome Help

Are you downloading from the Google site? If so, try unchecking Set Google Chrome as my default browser on the download link.

https://www.google.com/intl/en/chrome/browser/

You might try downloading from another source. Filehippo is safe, and has the latest stable release

Download Google Chrome 26.0.1410.43 - FileHippo.com

They also have the latest beta if you wish.

Download Google Chrome 27.0.1453.56 Beta - FileHippo.com

A Guy

3 more replies
Relevance 43.87%

Right now, when I connect my card reader to my pc, adobe photoshop album starter edition 3.2 opens automatically. How do I change this setting so that I can use windows to download my pics.Thanks and God Bless,BigtimeSorry, Windows XP OS

Answer:Choosing an application to download pictures

When you plug it in, do you get a window asking you what to do, or does it go straight to Adobe Photoshop?

1 more replies
Relevance 43.87%

My brother's computer suddenly lost all traces of one of his installed applications. Not only is it no longer installed, but the executables and associated folders have all vanished, even when searched for with a file recovery utility.

Also (and I don' think this is a coincidence), suddenly he can no longer download ANYTHING, although he can receive email via Outlook.

We ran a security software scan, and no malware was found.

I'm mystified. Any ideas?

He's running Windows 7 and Mozilla Firefox.
 

Answer:suddenly lost an application; plus, can't download anything

Hi

Personally from what you have described I would run the below and then start a new thread in our malware forum and attach the results as it seems from your description malware related.





Please read and follow the following READ & RUN ME FIRST. Malware Removal Guide and once finished please start a new thread in the Malware Forum plus a guide on how to attach the logs HOW TO: Attach Items To Your Post Click to expand...

Then if given the all clear from our malware team, revisit this thread but also tell us what Service Pack Windows 7 is at as well as installed security software.
 

4 more replies
Relevance 43.87%

This is the situation: Whenever I try to donwload files (E.G - http://www.mediafire.com/?a2x5yeggjcolwxb) or various other 'Minecraft' Files it will download them, 100%. But when I try to open them or save or w/e,
c:/users/<admin name>/downloads/world1(2).rar
application not found

Is it me or the file? thanks, Brandon.

Answer:Can't download files, Application not found

Quote:





Originally Posted by Brandp8787


http://www.mediafire.com/?a2x5yeggjcolwxb
c:/users/<admin name>/downloads/world1(2).rar
application not found




The file you are downloading is world1(1).rar - multi-volume. You need to download the world1(2).rar + others, if they exist.

Contact the owner of the file(s).

This thread is closed.

`

1 more replies
Relevance 43.87%

I am trying to download and install User Profile Hive Cleanup Service from Microsoft onto a Vista machine and I keep getting the following error. How is this fixed? Thank you.

"There is a problem with the Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
 

Answer:Solved: Can't download an application from Microsft

8 more replies
Relevance 43.87%

Hi all, I want some app , but they are not in site for download
Their name:

1- Delcam FeatureCam 2013 R2 SP2 Build 19.6.0.27

2- Vista Codec Package 6.5.1

3- Aero Glass Tweaker 1.2

4- FastStone Image Viewer 4.8 Final

5 - Pokki 0.262.11.421

6- AVG Internet Security 2013 13.0 Build 3272a6212



Techspot is really best site for download software. so should have all apps Thanks
 

Answer:I want Some application software , they are not in site for download

For anything you can't find here, google for it and choose the developer's site.

Avoid places like CNET (download.com) that pack spyware with it.
 

2 more replies
Relevance 43.46%

inbuilt applications on my Lumia 520 are not updated and new applications are not installed in my mobile why?

Answer:What is family setting on my Lumia520 and how do I download the new application?

Is this a new phone or a second hand.
Do you have your Microsoft account installed on it?

2 more replies
Relevance 43.46%

not a valid win32 application(windows 7) i get this error when i try to download files from the internet.

Answer:Download error Not a Valid Win32 Application

Are you downloading 64bit versions and trying to install them on 32bit??

3 more replies
Relevance 43.46%

The Vidmate is an app which can download any video uploaded on YouTube or any other Video streaming site. Not only this but also, it has numerous features and to mention all here would not be possible. So, to get benefits of all the features of Vidmate application you would require downloading the app on your device.
visit here for more information:
http://www-vidmateapp.com/
 

More replies
Relevance 43.46%

Hi, i've developed a ClickOnce app, on my LAN Network, users access to this app through URL

http://10.20.30.40/APP/setup.exe

but just once PC with IE 6 throws "File Not Found", but with the Linux Utility for Windows Wget , i could download the file from command line with no troubles. the site http://10.20.30.40 is added to trusted sites, but no changes with "File not found" error. Thanks for Any help or clue

More replies
Relevance 43.46%

Windows Vista. I am trying to load a software application from a CD. When I click on the auto run I get the following error:

The program or feature
"\??\C:\USERS\............\DISK1\SETUP.EXE"
cannot start or run due to incompatibility with 64-bit versions of Windows. Please contact the software vendor to ask if a 64-bit Windows compatible version is available.

Do I really need to contact the vendor???? Is there any way around this?????
 

Answer:Software application download part deaux

when I wanted to buy a new laptop, I was told, I would have to buy all new software since Vista won't run most of the older programs, especially 64-bit need apparently different drivers.
I bought a used laptop with XP therefore. I like the programs I bought and can't afford to update constantly when Windows changes/

I guess you will have to contact the software vendor.
 

3 more replies
Relevance 43.46%

Somehow my Vista laptop got infected with a bug. This bug will not let me download or run anykind of antivirus type application. I've tried saving them as different file names, but it still will not work

I really don't want to reformat everything. Please help!!

Answer:Im infected. Cant download or run any spyware/antivirus application. HELP!!

It sounds like you may have something running which is preventing you from being able to install/run security software. What I normally do is use Rkill to stop the malware processes that start when the computer comes on. Then I run the Malwarebytes and SUPERAntiSpyware. Here are some DL links for the Rkill....LINK 1LINK 2LINK 3LINK 4Save it to your desktop and then double click to launch it (With Vista you need to right click and select run as administrator). You should see a little black window open and then close. If you see that box then it worked. If you don't see the black box then delete the file and use another download link and repeat the steps.Once it runs you should be able to run Malwarebytes.

7 more replies
Relevance 43.46%

When trying to download .exe files, I always get an error message telling me that the downloaded file is not a valid win32 application. The latest file to do this is the update for zonealarm free version which addresses the problem with Windows security update KB951748. This problem has been going on for months and affects both of my computers equally. Please helppppppppppppp!
 

Answer:Not a valid win 32 application when trying to download and install .exe files

Since you have two different computers -- and I assume they both do not have Zone Alarm and that update (I'd uninstall both if they do) -- try connecting one directly to the modem, bypassing the router.

Test with an alternate cable as well if you can.

I have also seen this problem on older NForce motherboards with the onboard Nvidia firewall installed (Network Access Manager).
 

3 more replies
Relevance 43.46%

I am looking for a Windows application that would enable me to quickly extract bulk emails from an IMAP server. I trying to help a friend who has 15000+ emails in two separate folders on her IMAP server. She uses Outlook, which is running incredibly slow due to the quantity of emails on the IMAP server. Whenever I try to archive the emails, Outlook freezes, so I'm pretty much looking for an application designed to just fetch and delete emails from an IMAP server.

Anyhow have any suggestions? Feel free to leave questions if my problem is not clear.

Thanks,

- Clear
 

Answer:Download IMAP Emails Fast Application?

Use mulberry if you want super fast handling and access of IMAP accounts with lots of messages. Some servers will have a fit about mulberry because it opens a zillion connections to the server though, so watch out. You can select messages and save them, but its save feature sucks when trying to save multiple files at once. (Note that mulberry's UI sucks)

Use Sylpheed if you want to backup a folder to an .mbs file. The option is under file -> export to mbox file. It will produce a really good backup. As for speed, with a 7Mbps connection, it will take around 20 minutes per 8000 messages consisting of 25.5MB to fetch the messages and generate the .mbs file. But, it might be faster or slower depending on your system too.

There's Symphony Imap backup, which you can use to backup a complete account. It's not exactly fast, but it handles lots of messages no problem.

If all you want to do is delete some messages, use mulberry. If you want to backup, use Sylpheed.

Thunderbird won't be as fast as mulberry, but it should work fine for accessing lots of messages.

Opera works really good (although not super fast in fetching) with lots of messages. 100000 for example. I usually use Opera with around 20000 messages.
 

3 more replies
Relevance 43.46%

I have just received my IdeaCentre B320 All-in-one desktop PC and am absolutely loving it!When I was looking through the specs before I bought it they stated that one of the features of the desktop was the Veriface application.  However I cannot find it on the computer and am wondering if I have to download it and where I would download it from?Any help would be much appreciated!

Answer:IdeaCentre B320 - Veriface application, how can I download this?

I'm not sure about Veriface but, there is a Veritouch application for the B520. I have not used it yet therefore, I can't tell you how well it works.

1 more replies
Relevance 43.46%

Hi All,

This is a brand new HP computer running Windows 7. I did not have any anti virus software on it yet, and I immediately have a virus/malware that seems to be infecting everything. When I try to open any program, I get "Application cannot be executed. The file ****.exe is infected. Do you want to activate your antivirus software now?"

IE Explorer opens, but I cannot connect to any websites. New messages are constantly popping up about incoming attacks and rundll32.exe is infected, etc. I cannot download anything. Please Help!

Answer:Application cannot be executed....infection won't let me open or download anything. PLEASE HELP

Please download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:
- Update Malwarebytes' Anti-Malware
- Launch Malwarebytes' Anti-MalwareRestart the computer into Safe mode with network;If you can not choose just pick Safe mode.Launch Malwarebytes' Anti-MalwareMBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from http://mbam.malwarebytes.org/database/mbam-rules.exehere and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box... Read more

3 more replies
Relevance 43.05%

Mod Edit: Merged posts and cleaned ~~boopmeHi,first of all I apologise for my poor English. From yesterday, when I use Firefox or Chrome, Norton closes them after few minutes and appears this notification 
 Immagine.jpg   153.5KB
  0 downloads I've tried a complete scan and also Norton Power Eraser but the problem is not solved. Can you please help me? Thank you in advance Nycky    DDS (Ver_2012-11-20.01) - NTFS_AMD64Internet Explorer: 11.0.9600.16428Run by Home at 15:17:41 on 2014-02-04Microsoft Windows 7 Home Premium   6.1.7601.1.1252.39.1040.18.4008.1237 [GMT 1:00].AV: Norton 360 *Enabled/Updated* {63DF5164-9100-186D-2187-8DC619EFD8BF}SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}SP: Norton 360 *Enabled/Updated* {D8BEB080-B73A-17E3-1B37-B6B462689202}FW: Norton 360 *Enabled* {5BE4D041-DB6F-1935-0AD8-24F3E73C9FC4}.============== Running Processes ===============.C:\Windows\system32\lsm.exeC:\Windows\system32\svchost.exe -k DcomLaunchC:\Windows\system32\nvvsvc.exeC:\Windows\system32\svchost.exe -k RPCSSC:\Windows\System32\svchost.exe -k LocalServiceNetworkRestrictedC:\Windows\System32\svchost.exe -k LocalSystemNetworkRestrictedC:\Windows\system32\svchost.exe -k LocalServiceC:\Windows\system32\svchost.exe -k netsvcsC:\Windows\system32\svchost.exe -k GPSvcGroupC:\Windows\system32\svchost.exe -k NetworkServiceC:\Windows\system32\WLANExt.exeC:\Program File... Read more

Answer:Fake App Attack: Misleading Application File Download 3

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/523164 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

2 more replies
Relevance 43.05%

Hello there,
As it says in the title, I've been having this error thrown at me by Norton the past couple of days merely by having my browser open. There's a managed extension that may be involved with it but despite my best efforts I cannot remove it (multiple uninstall/reinstalls, Norton Power Eraser, a reasonably thorough (albeit amateur) purge of any files related to Chrome, and fiddling with Regedit).
 
Though the problems might not be related, I suspect they are as they both appeared around the same time. I currently have Chrome uninstalled (As it is quite useless) but much prefer using it over Internet Explorer, so any help getting it back would be greatly appreciated.
 
ASUS ROG
Windows 7 64bit
 
Thank you.

Answer:Chrome: Fake App Attack: Misleading Application Download 3

Hello Dashiva I would like to welcome you to the Malware Removal section of the forum.Around here they call me Gringo and I will be glad to help you with your malware problems.Very Important --> Please read this post completely, I have spent my time to put together somethings for you to keep in mind while I am helping you to make things go easier, faster and smoother for both of us!Please do not run any tools unless instructed to do so.We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same",... Read more

26 more replies
Relevance 43.05%

Hi there!. I see a lot of people having this very same problem (fake app attack: Misleading application file download 3) causing Firefox and Chrome to crash. Can anyone please help? I downloaded SecurityCheck and AdwCleaner but I'd be happier with someone expert guiding me through the deleting process.
 
Thanks a lot!

Answer:Fake App Attack: Misleading Application File Download 3 AGAIN

Problem solved =)

2 more replies
Relevance 43.05%

Hi all,
 
I am also experiencing the crashing of Chrome and IE every 3 mins with a warning from NIS about a Fake App attack.
 
Would be very grateful if someone could please help.
 
All the best,
David

Answer:Fake App Attack: Misleading Application File Download 3

Hi all,
 
The problem has just spontaneously disappeared within the last hour.
I've absolutely no idea why. My PC was unusable for two days.
 
Best wishes,
David

5 more replies
Relevance 43.05%

Hallo,
I am looking for a map application that let you download the map for offline use. Another important feature that I'm looking for is that I would like to be able to create my maps, by adding symbols to the offline maps.
Any suggestion ? Thanks

Answer:Is there a map application that lets you download maps for offline use and add signs to the map?

Originally Posted by Windows Central Question Hallo,
I am looking for a map application that let you download the map for offline use. Another important feature that I'm looking for is that I would like to be able to create my maps, by adding symbols to the offline maps.
Any suggestion ? Thanks What device are you using?
If you're using a Windows Phone 8.1, the native maps app lets you download apps for offline use, under Settings > Applications > maps > download maps > select country.
I'm not sure what you meant by "adding symbols" in conjunction with "create my maps". Did you mean you want to edit the offline map, i.e. creating custom roads? If yes, then there seems to be no map app that allows you to do this, though there is website for that: openstreetmaps.org. If you meant adding landmarks and points of interest, then you can do that with the native Windows Phone 8.1 maps app as well. Just hold on any part of the map until a prompt to name that location appears. The neat thing about this is that this would work with Cortana when you want "her" to remind you when you reach that particular location or get departure/arrival/traffic alerts for that location... if you have "her" available and enabled in your region/country.

2 more replies
Relevance 43.05%

I too have the same issue.  Norton catches it, and then it shuts down on Chrome.  Very confusing...  can't understand why, nor fix.  Anyone?
 
Moderator Edit: Split off of another topic to better allow help
Roger

Answer:Fake app attack misleading application file download 3 also

Welcome aboard   Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result. Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop.* Double-click mbam-setup.exe and follow the prompts to install the program.* At the end, be sure a checkmark is placed next to Up... Read more

1 more replies
Relevance 43.05%

Hello,
 
Recently, whenever I visit a new web page, I receive a notification from Norton that it has blocked an intrusion from "t.cttsrv.com".
 
I have tried uninstalling any programs that I've recently added, as well as running a full scan with norton to no avail.
 
I've also done a scan with AdwCleaner, and have included the log below:
 
___________________________________________________________________________________________
 
# AdwCleaner v4.111 - Logfile created 01/03/2015 at 12:29:59
# Updated 18/02/2015 by Xplode
# Database : 2015-02-18.3 [Server]
# Operating system : Windows 7 Home Premium Service Pack 1 (x64)
# Username : User - USER-THINK
# Running from : C:\Users\User\Desktop\AdwCleaner.exe
# Option : Cleaning
 
***** [ Services ] *****
 
 
***** [ Files / Folders ] *****
 
 
***** [ Scheduled tasks ] *****
 
 
***** [ Shortcuts ] *****
 
 
***** [ Registry ] *****
 
Key Deleted : HKLM\SOFTWARE\Classes\S
Key Deleted : HKLM\SOFTWARE\Classes\CLSID\{D2CE3E00-F94A-4740-988E-03DC2F38C34F}
Key Deleted : HKLM\SOFTWARE\Classes\CLSID\{8DCB7100-DF86-4384-8842-8FA844297B3F}
Key Deleted : HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Browser Helper Objects\{D2CE3E00-F94A-4740-988E-03DC2F38C34F}
Key Deleted : HKCU\Software\Microsoft\Windows\CurrentVersion\Ext\Stats\{D2CE3E00-F94A-4740-988E-03DC2F38C34F}
Key Deleted : HKCU\Software\Microsoft\Windows\CurrentVersion\Ext\Stats\{8DCB7100-DF86-4384... Read more

Answer:Web Attack: PUP/Adware/Fake Application Download 4 Malware

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.===Download Malwarebytes' Anti-Malware from HereDouble-click mbam-setup-2.X.X.XXXX.exe to install the application (X's are the current version number).Make sure a checkmark is placed next to Launch Malwarebytes' Anti-Malware, then click Finish.Once MBAM opens, when it says Your databases are out of date, click the Fix Now button.Click the Settings tab at the top, and then in the left column, select Detections and Protections, and if not already checked place a checkmark in the selection box for Scan for rootkits.Click the Scan tab at the top of the program window, select Threat Scan and click the Scan Now button.If you receive a message that updates are available, click the Update Now button (the update will be downloaded, installed, and the scan will start).The scan may take some time to finish,so please be patient.If potential threats are detected, ensure that Quarantine is selected as the Action for all the listed items, and click the Apply Actions button.While still on the Scan tab, click the link for View detailed log, and in the window that opens click the Export button, select Text file (*.txt), and save the log to your Desktop.The log is automatically saved by MBAM and can also be viewed by clicking the History tab and then selecting Application Log... Read more

9 more replies
Relevance 43.05%

Hi,
Did a search on the forum for a similar topic, but didn't find anything relevant.

I've d/loaded the following :
http://www.freedownloadmanager.org/ (FDM) and did a test on a small applic. Managed to Run the app. onto the PC (Applic. was Upload Manager, approx. 400kb) from FDM. Simple enough.

Before doing that, however, tried to Save it to a CD, by attempt @ right-clicking on file name. But, there's no option to try save it to CD, by electing to ''Send to...'', like one finds in IE . Also, couldn't drag & drop file from FDM to DVD RW Drive (D:)

Had a look through the headings in FDM, and closest I got to was Export option, but it seems to only want to save the file in a .txt format,
which to me implies it won't allow it (i.e. the contents of the file) to Run from the CD thereafter ??

My aim is to be able to save certain Windows Updates (espec. Service Packs which constitute about 400MB's, each) to FDM, and then simply save them to a CD / DVD+RW / memory stick.

[I know I can d/load these MS files via Windows Update directly onto the PC, and have done so many times b4, but want to now try this other option.]

Any ideas would be appreciated.

Answer:How to SAVE an application to CD/DVD/memory stick, via a Download Manager ?

Hello,

You are in the wrong Section, I'm moving this Thread to Microsoft Support.

1 more replies
Relevance 43.05%

Hi there,
Thanks for reviewing my question. 
Every few minutes, Norton pops up saying that “Norton blocked an attack by Fake app attack misleading application file download 3.”  This causes my browser (both Chrome & Firefox) to crash.  I ran a full system scan and it found nothing.  I also did a system restore to a few weeks ago (the problem started today).  Any help would be appreciated!  Thanks.
 
Moderator Edit: Moved for the Virus, Trojan, Spyware, and Malware Removal Logs forum to a more appropriate forum due to no logs.
Roger

Answer:Fake app attack misleading application file download 3

Welcome aboard   Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result. Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop.* Double-click mbam-setup.exe and follow the prompts to install the program.* At the end, be sure a checkmark is placed next to Up... Read more

3 more replies
Relevance 43.05%

Hi I'm desperate at this point hoping someone besides dell or windows can help me.
I just bought my dell precision that runs windows 8.1. Every online application that I am downloading and opening looks too small for my screen. applications like adobe creative cloud, media fire cloud desktop application and Wacom.
I've attached a screenshot of what the application looks like compared to the rest of the screen. How can i fix this?

Answer:Dell / Windows 8.1 internet download application issue

Hi mcbair25,
Adobe cloud is always like that its the same for me and everyone.
If you have another program or app that runs like that then mention it please.

5 more replies
Relevance 43.05%

Recently I have been getting dialog boxes popping up at seemingly random times asking me what to do with a download from stumbleupon called application/octet-stream. I have not clicked on a download link and I don't know what it is trying to download. I have cancelled every time rather than let the download proceed.

I tried to attach a screen capture showing one of the dialog boxes, but I had already uploaded it on a different forum and now it won't upload here.

I am running Win XP sp3, usually use the Firefox browser (ver 9.0.1) and I am often on Failblog.org when this happens. I recently went through the whole malware removal procedure and my system is clean.

Any idea what this is and what I should do about it?

Thanks,

Dave
 

Answer:why am I asked to download stumbleupon application/octet-stream?

http://support.mozilla.org/en-US/questions/746116
from November but probably still applicable.
 

2 more replies
Relevance 42.64%

My system web browsers were coming to a complete halt before or sending me to a web search called omiga, I unwittingly added the virus to my system by installing a free program called ''fast video player''. I ran the Norton anti virus full system scan first and later on a quick scan. It picked up and removed some Malware which now allows me to use my browsers without grinding to a halt or being redirected. However I am still getting a pop up that my Norton firewall is detecting as "Web Attack:PUP/Adaware/Fake Application download 4". I have attached the Norton scan results as well as the quarantine list. Below I have the DDS log and I have attached the attach.txt. Thanks in advance.
 
|DDS (Ver_2012-11-20.01) - NTFS_AMD64 
Internet Explorer: 11.0.9600.17344
Run by Clarence at 14:58:38 on 2014-10-21
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.61.1033.18.8177.5735 [GMT 11:00]
.
AV: Norton Internet Security *Enabled/Updated* {D87FA2C0-F526-77B1-D6EC-0EDF3936CEDB}
SP: Norton Internet Security *Enabled/Updated* {631E4324-D31C-783F-EC5C-35AD42B18466}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Spybot - Search and Destroy *Enabled/Updated* {9BC38DF1-3CCA-732D-A930-C1CA5F20A4B0}
FW: Norton Internet Security *Enabled* {E04423E5-BF49-76E9-FDB3-A7EAC7E589A0}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\... Read more

Answer:Web Attack:PUP/Adaware/Fake Application download 4 intrusion attempt

Hello Godel112358, welcome to Bleeping Computer's Malware Removal forum!
 
My username is LiquidTension, but you can call me Adam. I will be assisting you with your malware-related problems.
If you would allow me to call you by your first name I would prefer that.  
 
======================================================
 Please read through the points below to ensure this process moves as quickly and efficiently as possible.
Please read through my instructions thoroughly, and ensure you carry out each step in the order specified.
Please do not post logs using the CODE, QUOTE or ATTACHMENT format. Logs should be posted directly in plain text. If you receive an error whilst posting, please break the log in half and use multiple posts.
Please do not run any tools or take any steps other than those I provide for you. Independent efforts may make matters worse, and will affect my ability in ascertaining the current situation and providing the best set of instructions for you.
Please backup important files before proceeding with my instructions. Malware removal can be unpredictable.  
If you come across any issues whilst following my instructions, please stop and inform me of the issue in as much detail as possible. Please do not hesitate to ask before proceeding.
Topics are locked if no response is made after 4&... Read more

14 more replies
Relevance 42.64%
Answer:How can I download Tango for my lumia 535? I didn't find this application from store.

Unfortunately, you cannot. It is not available for Windows Phone.

4 more replies
Relevance 42.64%

Hiya

In medium to large organizations, it is common to want to keep all instances of a desktop application up to date with the latest version of executables, libraries, and other files. The Updater Application Block provides an extensible framework that companies can use to create updateable applications

System Requirements
Supported Operating Systems: Windows Server 2003

To run the Updater Application Block, you need the following:
- Microsoft Windows 2000, Windows XP Professional, or Windows Server 2003
- Version 1.1 of the Microsoft .NET Framework and .NET Framework SDK
- Visual Studio .NET 2003 (Recommended but not required

http://www.microsoft.com/downloads/...3a-d957-4b17-9b97-296fb4927c30&DisplayLang=en

Regards

eddie
 

More replies
Relevance 42.64%

Currently hve Norton antivirus blocking this threat with every second click of any link in any webpage
 
Here are my DDS logs:
 
.
UNLESS SPECIFICALLY INSTRUCTED, DO NOT POST THIS LOG.
IF REQUESTED, ZIP IT UP & ATTACH IT
.
DDS (Ver_2012-11-20.01)
.
Microsoft Windows 7 Home Premium 
Boot Device: \Device\HarddiskVolume1
Install Date: 23/10/2012 1:02:25 PM
System Uptime: 21/10/2014 1:32:35 PM (1 hours ago)
.
Motherboard: PEGATRON CORPORATION |  | 2ACB
Processor: AMD A8-3800 APU with Radeon™ HD Graphics | P0 | 2400/100mhz
.
==== Disk Partitions =========================
.
C: is FIXED (NTFS) - 1847 GiB total, 1778.171 GiB free.
D: is FIXED (NTFS) - 16 GiB total, 1.964 GiB free.
E: is CDROM ()
F: is Removable
G: is Removable
H: is Removable
.
==== Disabled Device Manager Items =============
.
==== System Restore Points ===================
.
RP140: 1/10/2014 4:56:27 PM - Windows Update
RP141: 9/10/2014 8:35:04 AM - Scheduled Checkpoint
RP142: 16/10/2014 3:57:55 PM - Windows Update
RP143: 20/10/2014 11:13:10 AM - Removed Bonjour
RP144: 21/10/2014 8:12:56 AM - Restore Operation
RP145: 21/10/2014 12:56:17 PM - Norton_Power_Eraser_20141021125615584
RP147: 21/10/2014 1:25:37 PM - Revo Uninstaller Pro's restore point - MyBestOffersToday 027.70
RP149: 21/10/2014 1:27:05 PM - Revo Uninstaller Pro's restore point - C:\Program Files (x86)\mbot_au_70
.
==== Installed Programs ======================
.
64 Bit HP CIO Components Installer
7500_7600_7700_Help1
Adobe AIR... Read more

Answer:'PUP: Fake application download 4' opens popups in all browsers Windows 7

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/552721 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

2 more replies
Relevance 42.64%

I've read this topic http://www.bleepingcomputer.com/forums/t/519643/firefox-crashes-norton-fake-app-attack-misleading-application-file-download-3/And followed nasdaq's guide. But my results were:
RogueKiller V8.6.3 _x64_ [Jul 17 2013] by Tigzy
mail : tigzyRK<at>gmail<dot>com
Feedback : http://www.adlice.com/forum/
Website : http://www.adlice.com/softwares/roguekiller/
Blog : http://tigzyrk.blogspot.com/
 
Operating System : Windows 7 (6.1.7600 ) 64 bits version
Started in : Normal mode
User : Bameoi [Admin rights]
Mode : Remove -- Date : 02/04/2014 12:14:40
| ARK || FAK || MBR |
 
¤¤¤ Bad processes : 1 ¤¤¤
[BLPATH] OptimizerPro.exe -- C:\ProgramData\BetterSoft\OptimizerPro\OptimizerPro.exe [-] -> KILLED [TermProc]
 
¤¤¤ Registry Entries : 6 ¤¤¤
[HJ POL] HKCU\[...]\System : DisableTaskMgr (0) -> DELETED
[HJ POL] HKCU\[...]\System : DisableRegistryTools (0) -> DELETED
[HJ POL] HKLM\[...]\System : DisableTaskMgr (0) -> DELETED
[HJ POL] HKLM\[...]\Wow6432Node\[...]\System : DisableTaskMgr (0) -> [0x2] The system cannot find the file specified. 
[HJ DESK] HKLM\[...]\NewStartPanel : {59031a47-3f72-44a7-89c5-5595fe6b30ee} (1) -> REPLACED (0)
[HJ DESK] HKLM\[...]\NewStartPanel : {20D04FE0-3AEA-1069-A2D8-08002B30309D} (1) -> REPLACED (0)
 
¤¤¤ Scheduled tasks : 1 ¤¤¤
[V1][ROGUE ST] schedule!3036567561.job : C:\ProgramData\BetterSoft\... Read more

Answer:About Error "Fake App Attack Misleading Application File Download 3"

2 files contain the same text (The text above)

17 more replies
Relevance 42.23%

Hi guys. I'm a Computer Science student and I do computer repair in my spare time.

I've run into a problem and I'm stumped. Maybe one of you guys will be able to figure this out.

A client came to me with a laptop that has a strange issue. He's been using Vista Service Pack 1 and IE7 and when he downloads any kind of binary file, after the download completes, it tells him the download is corrupt. IE won't allow any ActiveX controls to be downloaded, even after you allow a control to run. It fails silently, with no error message.

First thing I did was clear out the temp files, update him to IE8 and point him towards Firefox. Firefox will download files, but certain files (such as a manual download of the ActiveX control I was looking for) still refuse to run, stating the file is corrupt. I downloaded the file (which is used for Facebook.com's photo album creation) from a different source, and still no go. And this was attempted with both the updated IE8 and Firefox 3.5

OK, so maybe it's bad RAM? I did an extensive test of his RAM and came back with no errors. I scanned his hard drive, (nothing but a few orphaned files), defragmented his drive (was only at 2%), scanned for viruses and malware (finding 4 fairly common malware files), ran SFC scan, scanned and error-checked the registry, uninstalled his out-of-date McAffee that had run out of its subscription, and installed AVG.

AVG refuses to download updates. And this is on my own wired ne... Read more

Answer:Troubleshooting a client issue: IE and 3rd party application download files corrupt

Get rid of AVG and try either Avira Antivir or Avast. Then run Malwarebytes. Clear all temp files and all temporary internet files including cookies.
 

9 more replies
Relevance 42.23%

Hiya

The Configuration Management Application Block is an extensible framework that provides a simple and efficient mechanism through which to read and write application configuration data. Standard support is provided for the secure storage of configuration data in Microsoft SQL Server, the Windows registry, and XML files. However, the extensible architecture of the Configuration Management application Block enables you to securely store any type of application configuration data in any data store with minimal development effort.

System Requirements
Supported Operating Systems: Windows Server 2003

To run the Configuration Management Application Block, you need the following:
- Microsoft Windows 2000, Windows XP Professional, or Windows Server 2003
- Version 1.1 of the Microsoft .NET Framework and .NET Framework SDK
- Visual Studio .NET 2003 (Recommended but not required)
http://www.microsoft.com/downloads/...53-8ca7-4a92-85e3-e4795bd27feb&DisplayLang=en

Regards

eddie
 

More replies
Relevance 42.23%

For whatever reason an error message has popped up several times in recent days. It reads as follows:

NOTICE: You have not completed a scan, so the condition of your registry remains unknown. If your computer has errors in the registry database, it could cause unpredictable or erratic behavior, freezes, or crashes. Would you like to download Registy Cleaner to scan for and correct any registry problems now (recommended)?

I'm not sure what this means, but I presume the recommendation is legitimate. My first thought is that this is some sort of well-disguised advertisement, but I don't really believe so. Now that I think about it, it seems that I did interrupt a scan recently, so I'm wondering if that is why I keep getting this message. If so, perhaps all I need to do is run another scan through to completion.

I would greatly appreciate hearing from anyone familiar with this error message.
 

Answer:JavaScript Application error message recommends download of Registry Cleaner.

14 more replies
Relevance 41.82%

Hiya

The User Interface Process Application Block provides a simple yet extensible framework for developing user interface processes. It is designed to abstract the control flow and state management out of the user interface layer into a user interface process layer. This helps you write generic code for the control flow and state management for different applications types (for example, Web and Windows) and helps manage user's tasks in complex scenarios (for example, suspending and resuming stateful tasks).

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Windows® 2000, Windows XP Professional or Microsoft Windows Server 2003
Microsoft .NET Framework version 1.1
Visual Studio .NET (recommended but not required)

http://www.microsoft.com/downloads/...a0-f36b-4ebe-8d33-f57784bdfb0f&DisplayLang=en

Regards

eddie
 

More replies
Relevance 41.82%

Hi everybody!
 
At first I'd like to inform you that I'm not an advanced computer-user and that I'm not a native english speaker. So it may be, that I'll be a bit slow in understanding, but I'll try my very best!!! I'd be glad if you could try to write to me in an easy and understandable language... THANKS!
 
I use a DELL-Notebook (Vostro 1510) with these system-informations:

 System-Informations.jpg   77.14KB
  2 downloads
 
All software on my computer is updated (as far as I can judge...) and I use Norton Internet Security, CCleaner and Auslogics Disk Defrag daily.
 
My computer-problem occured three days ago: When I use Mozilla Firefox 26.0 (x86 de) it only takes a few minutes and then Firefox crashes (doesn't matter which website I'm on...). It happens every time! I can restore Firefox, but then it keeps crashing.
 
Norton Internet Security appears with the following note (Fake App Attack Misleading Application File Download 3):

 Norton-Warning1.jpg   155.11KB
  1 downloads

 Norton-Warning2.jpg   178.36KB
  0 downloads
 
I read a few postings and discussions on the internet (though not understanding every detail...) and found out, that you may help me getting rid of this "something" on my computer, helping me step by step to clean it.
 
I'd be very thankful for any professional help from you!!!
 
Cheers!
cisumdog

Answer:Firefox crashes. Norton "Fake App Attack Misleading Application File Download 3"

Hello, Welcome to BleepingComputer.
I'm nasdaq and will be helping you.

If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.
===

--RogueKiller--
Download & SAVE to your Desktop RogueKiller for 32bit or Roguekiller for 64bit Quit all programs that you may have started.Please disconnect any USB or external drives from the computer before you run this scan!For Vista or Windows 7, right-click and select "Run as Administrator to start"For Windows XP, double-click to start.Wait until Prescan has finished ...Then Click on "Scan" buttonWait until the Status box shows "Scan Finished"click on "delete"Wait until the Status box shows "Deleting Finished"Click on "Report" and copy/paste the content of the Notepad into your next reply.The log should be found in RKreport[1].txt on your DesktopExit/Close RogueKiller+==============

Please download AdwCleaner by Xplode onto your Desktop.Close all open programs and internet browsers.Double click on AdwCleaner.exe to run the tool.Click the Scan button and wait for the process to complete.Click the Report button and the report will open in Notepad.
IMPORTANT

If you click the Clean button all items listed in the report will be removed.
If you find some false positive items or programs that you wish to keep, Close the AdwCleaner windows.

Close all open programs and internet browsers.Double click on AdwCleaner.exe to run the tool.Click the ... Read more

7 more replies
Relevance 41.82%

Hey, I'm struggling to find anything to remove this fake app attack virus thing. I don't know what site I got it from and I have tried numerous full system scans and searching online for help. I came across this site and was wondering if anyone would be able to help me out.
 
Toshiba
Processor: Intel® Core™ i3-2350M CPU @ 2.30GHz 2.30GHz
RAM: 8.00GB (7.89 GB usable)
System type: 64-bit Operating System
 
couldn't tell you anymore than that I am afraid.
 
I saw this thread http://www.bleepingcomputer.com/forums/t/519643/firefox-crashes-norton-fake-app-attack-misleading-application-file-download-3/ and was wondering if I did the same thing would it work?
 

Answer:Google Chrome crashed -Fake App Attack: Misleading Application File Download 3

Hello -
Please note that link was from Virus, Trojan, Spyware, and Malware Removal Logs        
 
Each system is looked at one at a time, and yours may not be exactly the same.
Any small alteration to the O/S may mean another method should be used.
 
If you need more assistance, please Fully read and follow the instructions in the Preparation Guide For Requesting Help starting at Step #6.
 
NOTE :If you are unable to complete any step, still post the topic and leave a full description of your problems.
 
When you have done that, start a new topic and post the required logs to  Virus, Trojan, Spyware, and Malware Removal Logs forum, NOT Here, for assistance by the Malware Response Team Experts.
 
Please Use Copy and Paste for all your responses, and Do Not Attach them unless your helper requests this.
 
If HelpBot responds to your topic, please follw his Step #1 so the team will be notified.
 
After doing this, please reply back in this thread with a link to the new topic so we can close this one.

1 more replies
Relevance 41.41%

Faulting application name: iexplore.exe, version: 11.0.9600.17937, time stamp: 0x55a7fb4f
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x0000000000000000
Faulting process id: 0xdc4
Faulting application start time: 0x01d0e337fd5d8b3f
Faulting application path: C:\Program Files\Internet Explorer\iexplore.exe
Faulting module path: unknown
Report Id: 794dcfc7-4f2b-11e5-a1c3-14feb59f2af2
Then this error 1001 :

Fault bucket 36117055, type 27
Event Name: BEX64
Response: Not available
Cab Id: 0
Problem signature:
P1: iexplore.exe
P2: 11.0.9600.17937
P3: 55a7fb4f
P4: StackHash_6c37
P5: 0.0.0.0
P6: 00000000
P7: 0000000000000000
P8: c0000005
P9: 0000000000000008
P10:
Attached files:
C:\Users\Lori\AppData\Local\Temp\WER896A.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Lori\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_iexplore.exe_d53624b2ebd1de94a7cdd241fb375f95efccbf18_111acca1
Analysis symbol:
Rechecking for solution: 0
Report Id: 794dcfc7-4f2b-11e5-a1c3-14feb59f2af2

More replies
Relevance 38.95%

When I download a file with firefox 3.5.5 in vista home premium x64 I get an error - not a valid 32bit application. If I use ie8, the file downloads fine and I can open it.

More replies
Relevance 38.13%

Hi,  I accidentially delete the desktop version of 'Yoga Picks'. I would like to reinstall it, but can't find the download. I'm not looking for the 'Yoga Picks' Metro App - I'm looking for the common desktop verson. Can someone please provide a download link? Best regards,Dodson65

More replies
Relevance 36.49%
Question: FDD Calibration

Is it possible to re-calibrate the settings in a HP Pavilion 6535 OEM floppy disk drive/ can the existing settings be found? Sorry but HP support is not there after warranty expires, except for phone "help" @ $27.00 per minute.
 

Answer:FDD Calibration

16 more replies
Relevance 36.08%
Question: W520 Calibration

Hello all Nice to meet you!I received my new W520 some days ago and I'm really happy about it.I only have some issues with the color calibration. I'm using the integrated calibration device and the preloaded software (PANTONE) but the results are not that good. The screen gets too red or too blue :/Can you halp me? Any advice?Are there alternative softwares that work with the integrated calibration device that I could use to calibrate the screen? Thank you! 

Answer:W520 Calibration

I'm so sorry to bump but I really need some help with the calibration

5 more replies
Relevance 36.08%

Hello everyone, This weekend I wanted to re-calibrate the batteries of my X300 (it's running under Windows 7 RC).So I used the Power Manager and run the calibration (full charge - discharge - full charge) and I let the computer.When I came back later, I saw the level of charge was 1% although it was on AC power!OH MY GOD! I was so scared (I thought it wouldn't go under 5%) So I want to know : Is it normal to go so low ? Was Windows wrong ? My batteries are dead ? Today my father told me that he thought the autonomy has decreased  

Answer:Do batteries go to 1% during calibration ?

Hi blaq! The battery calibration process (full charge - discharge - full charge) takes several hours. It sounds like you came back to your X300 when it was half way through the process i.e. the battery was fully discharged. This is normal, but it sounds like you may have stopped the calibration process before it completed. I suggest you re-run the calibration.

2 more replies
Relevance 36.08%

does anyone know any calibration software, or some good ways to calibrate your monitor?

I just got my 2233RZ Samsung 120hz Monitor and it seems a little too bright. I only calibrated my TV before and I am not sure how to do it on a computer.
Thanks for your help.

Answer:Monitor Calibration?

  
Quote: Originally Posted by Warfare


does anyone know any calibration software, or some good ways to calibrate your monitor?

I just got my 2233RZ Samsung 120hz Monitor and it seems a little too bright. I only calibrated my TV before and I am not sure how to do it on a computer.
Thanks for your help.


Hi and welcome

There is a display calibration in control panel>display control panel>calibrate

Hope this helps

Ken J+

2 more replies
Relevance 36.08%

My most reliable internet source is IE9. One day, I cleaned my keyboard without shutting down my computer. I was still on my email page. Now, whenever I click something, such as something on google, it usually selects an option 1 or 2 above or below. It doesn't select the correct one. Also, when i try to click something, i have to right click and press open. This is very Inconvenient. I ignored it for a while, but now I can't even register for certain programs. When it has those selecting options, it wouldn't let me open the options. When i finally did, selecting it only brought me back up to my name! Whenever i press backspace, it brings me to the previous page.

Answer:I have calibration issues only in IE9

So when you use another browser, everything is normal ?

Someone with more knowledge may opine, but I would begin by resetting IE9. Go to Internet Options/Advanced/Reset and/or uninstall and reinstall IE9.

9 more replies
Relevance 36.08%

When I run the Huey color calibration, the "fixed" colors look exactly the same as the non-fixed. I have the latest version of the software. Any help would be greatly appreciated.

Answer:W700 Calibration does nothing

Anyone have a fix or suggestion for this? I'm running windows 7 professional.

3 more replies
Relevance 36.08%

I have tried many times to calibrate my monitor so as to get the printed out put to match display and have failed miserably each time.I find that if I follow all instructions, the screen display always looks far to dark and the colours also dark.I have used Adobe gamma, Serif monitor calibration, and Samsung Natural colour but all with the same results.Where do I find ICC profiles etc?Bryan Smith

Answer:Monitor calibration

Some advice and freeware:click hereclick hereclick here

1 more replies
Relevance 36.08%

On past systems I've used a Monaco Optix colorimeter for display calibration and profiling, however a recent email from their tech support tells me this won't be an option in the near future.






We still do not have support for Vista 64 bit operation. We do have a technically unsupported procedure for using Optix in a Vista 32 bit operating system, and you can find this on our webpage support pages for Optix.

I understand that you have an urgent need to do calibration in Vista 64 bit, but we don't have any ETA for this operating system and Optix compatibility.

My apologies that we don't have any better news for you at this time.



Anyone know of a colorimeter/calibration&profiling system that works with Vista 64?

More replies
Relevance 36.08%

Hello again
I am in the process of improving quite a lot of photos using photoshop elements 5. Some of these photos will be enlarged and printed not using my own printer!
I think that I could do with calibrating my monitor. There seems to be quite a few free software options and software to purchase. Has anyone used this sort of software and been happy with the printed results.
Thanks tdc.
 

Answer:Monitor calibration

Has anyone used this sort of software and been happy with the printed results.Click to expand...

Nope ...

You need a Spider to really calibrate any monitor, or some other makers offering.



 

3 more replies
Relevance 36.08%

Hello all, I've found many great tips here! I can't seem to get the touchscreen to calibrate correctly no matter what I do.  I've read some tips on the forum here with regards to this, but still no luck (with a dagi stylus or even finger touch). It's especially a problem when trying to read an ebook in the tablet position.  I mostly have problems at the edge of the screen (especially scrolling and closing a window).  When trying to close a full-size window, it picks up the pressure well below and to the left of the box to close. This happens in both tablet and "laptop" modes.  The touch capabilities work much better towards the center of the screen.  I did a fresh install to Home Premium, but I recall having some problems from the factory install too. I'de hate to RMA it!  Any advice on this?   I've tried the calibration thing many times (even placing the stylus under the rim of the screen fixture to hit the calibration points). Anybody know how long I'll be without my s10-3t if I do RMA it?  :-(  Maybe I'll just get an IPad... Thanks much!













Solved!

Go to Solution.

Answer:s10-3t screen calibration

All my drivers look current, I wonder if the Intel_VGA driver controls the touch screen accuracy.  I loaded the current version of 15.12.75.50.1929 but I can't find anything in Device Manager to actually see what version I'm on for this.  My "Intel(R) Graphics Media Accelerator 3150" driver version is at 8.14.10.1929  I don't know which driver I should be checking for the touch screen functionality.  I haven't tried the new Bios, but it's worth a shot. Tomorrow, I'll call the 1-800 number which I just found.  Any advice is appreciated!   

4 more replies
Relevance 36.08%

I have a new T-500, that I will be using to work on photographs with Photoshop when on the road.  I have a monitor calibration system that I use on my home systems that I would like to run on this new laptop so that I know what I am getting when I work on a photo.  To do this I need to be able to adjust screen brightness, color balance, contrast etc. Where are the controls for these parameters?? I am running Windows Vista, which is new for me. Thank you...

Answer:MONITOR CALIBRATION

Does your T500 have switchable graphics or just integrated Intel graphics? For Intel, you can do the following........ Right-click on desktop.Click Graphics Properties.On the left, click Color Correction. There you can adjust Gamma, Brightness, Contrast.Then, click Video Settings at the botton.Click the Color Control tab. There you can adjust the color.Message Edited by ortegaluis on 03-21-2009 07:56 PM





\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

3 more replies
Relevance 36.08%

Hi all - just got my s10-3t yesterday and am already addicted.2GB upgrade, Win7,a lot of cleaning up, running very nicely. I've messed something up though, and can't figure out how to fix it.Installed SimpleTap, and calibrated my touchscreeen in netbook mode. Went into tablet mode and the display was really messed up - uninstalled SimpleTap and issue was solved.Now I have found that the touchscreen calibration is WAY off in tablet mode - I can't even grab the scroll bars at the edge of the screen (center of screen is better but inaccurate - no touch at all on outer 3/8" of the screen)Calibration on netbook mode is excellent. Any suggestions? I did try to recalibrate twice, no luck. I think it's a calibration issue not a SimpleTap issue.wtf?

Answer:Calibration issues s10-3t

The first time I calibrated there were two sets of crosshairs and I couldn't get to the outside set so did the inside.  Now it always come up with the inner set only. I also find it difficult to get my screen to react at the edges.  I usually hid my taskbar but I can't get it with my finger, have to open enough to use the touchpad. I'm thinking it just isn't sensitive on the edges.

3 more replies
Relevance 36.08%

Following the procedure given in HP Support Assistant to calibrate my notebook battery (reboot, press Esc when power light comes on, selsect F2 System Diags etc., etc) I find that pressing Esc when the power light comes on does not work.Can anyone explain why this is so or offer anothe procedure?

More replies
Relevance 36.08%
Question: Calibration Issue

Hello, I've been dealing with this issue for quite a few months now and I thought it was about time I got it sorted out.

See I recently purchased a laptop, after previously owning a PC for 4 years. I still own my PC but only use it for editing images on Photoshop CS5. After a few days, I transferred some images I had edited on my PC onto my laptop to discover that the colours were completely different. My first thought was that the problem had to be the colour settings on my PC as my laptop had all the default colour settings from when I had purchased it.

After fiddling about with the Brightness & Contrast and Colour Adjustments on my monitor, I decided to give up. I'm unsure of whether this is an issue with the monitors settings or infact settings on my computer but it can be a bit annoying when I spend time editing an image to transfer to my laptop, to find out that the colours are all completely off. I am aware this isn't a Windows Vista problem, but I have a feeling it has to do with the calibration setting I have on a Windows Vista computer system.

I was wondering if anyone could help, any help would be much appreciated! And if you need to know any settings or information about the specific monitor or pc I am using, feel free to ask. Thank you!

(I am using Microsoft Windows Vista Service Pack 2)

More replies
Relevance 36.08%

Can anyone be able to run touchscreen calibration in tablet mode under Win7 Tablet PC Settings?  I calibrated it in landscape mode and the touchscreen is good and precise but once turn it into portrait mode, the touchscreen is always off somewhat and I can not run calibration.

More replies
Relevance 36.08%

How can I caliberate my Lumia battery...there has been sudden drop in battery % and sometimes remain constant with heavy usage and again after reboot different %

Answer:How is battery calibration done?

Your device's battery probably does not need calibration. BU-603: Battery Calibration ? Battery University

3 more replies
Relevance 36.08%

The battery level of my Yoga 500 15IBD drops suddenly from 10% to 0 and the laptop shut down. Does this indicate the battery needs replacement?  When the calibration is started, there is no indication of progress.  How do I know when the calibration is completed and how long will it take to complete?

More replies
Relevance 36.08%

I'm looking for recomendations for guides on how to set monitor calibration so I see colors, gamma, contrast and brightness of images posted at web sites, as they are supposed to be viewed.
I have altered my settings over time to accomodate my eyes, but after the last update at TSG, I'm aware that my settings are not conducive to posting what I want to project as an image and what I'm seeing in other's images is often too dark.
I have an old guide from a Jasc PSP7 web page that helps correct to some degree, but it's a simplified guide that may not be as accurate as I want.
I have PSP8, but the help file states:
Paint Shop Pro’s monitor gamma setting adjusts how colors display in Paint Shop Pro. This setting does not affect how your monitor displays colors in other applications.Click to expand...

So, using it to view web sites won't help.

Any recomendations for setting up monitor calibration and or guides to follow?

Thanks
 

Answer:Monitor Calibration

11 more replies
Relevance 36.08%

Just got a new 7200 mAh 11.1V 9 cell battery for it. Company recommends to fully charge and discharge at least 2-4 times to calibrate it.

How do I do that.........since the lap shuts down at 7% and doesn't allow to full discharge till dead??

Thanks.

Answer:Battery calibration?

Dell published an article on how to calibrate Li-ion and Ni-MH/NiCad laptop batteries. The article doesn't say anything about charging/discharging 2-4 times. I'd contact Dell again and ask for clarification.

On-the-Go articles | Dell

Maybe Dell has changed its mind on the proper procedure but I have a Dell Inspiron 1200 laptop from around 2006. It still has the original battery and still gives about 2 hours battery life. That may not sound like a lot of time but when brand new it only gave 2.5 hours. From the very beginning all I did was let the battery run down to the pre-determined percentage (all my laptops shut down at 5%) and then let it fully charge back up to 100%. This is he same procedure I've used on all my laptops (Dell, Sony, Acer, Lenovo, and a couple other machines from work.)

Here's another article that might be of interest.

How to Calibrate Your Laptop

6 more replies
Relevance 36.08%

I recently got an LCD monitor, now adobe 7 says my profile is defective, rerun your monitor calibration, I cannot find a calibration tool on my system, apparently there should have been adobe gamma in my control panel, but it is not, need a little help with this folks , can i use another tool if so where do i find one, or where is the adobe one

Answer:Monitor calibration

click here

2 more replies
Relevance 36.08%

I have a DELL Latitude 110L ..on start up I get a "battery calibration" screen..I have to press esc twiceto allow Windows XP to start... the battery shows 100% charged.How do I stop this happening...its just a pest. Cheers all

Answer:battery calibration how to get rid

OOPS meant to mention that the DELL site says to discharge battery to zero ..then re-connect ac mains unit to recharge the battery.. this can take literally hours.. doesnt seem much point if the battery shows fully charged.

1 more replies
Relevance 36.08%

Does anyone know where I can find screen calibration settings that offsets the TN screen?

More replies
Relevance 36.08%

My computer keep shutting down without warning or nottification. I have tried to calibrate the battery using the utility in HP Assistant and PCDiagnos without any success, can you help?

Answer:Battery Calibration

How old is the battery?

2 more replies
Relevance 36.08%

 I have this T500 for more than 3 years and barely used the battery - there are just 16 cycles which is almost nothing.Of course there was no need for battery calibration so far.I never dropped the level below 18-20 % and these few times charged up to 90%. Moreover it was kept in the lower drawer of the refrigerator.Finally i got to calibrate it and while it dropped steadily up to 5%, now it lingers at 4% for more than 40 minutes. It is almost weird - the time from 35% to 6% is almost the same with that of 6% to 4% !I have read many things about li on (and other types) battery behavior and there are some threads here if i recall. So I would welcome any feedback and explanation of the mentioned phenomenon... and of others of course.It is a nice opportunity to hear more battery stories in this thread.      

Answer:Battery calibration

Hi
 
Welcome to the community.
 
As per your concern if your battery has much lesser capacity or does not charge at certain level any longer, you may want to perform a gauge reset on the battery.
 
Double-click the green "Power Manager" battery icon near the Windows' system clock, usually at the lower-right corner of the screen. If you cannot find this icon, click "Start," "All Programs," "Access IBM" and "Power Manager."Click the "Battery Information" tab at the top.Click "Battery Maintenance."Click "Perform Reset," and then click "Continue" on the confirmation dialog box. This procedure will take at least six hours to complete, and you should not use your ThinkPad during that time. You will be prompted when the battery reset is complete. It will takes more time to complete it.
 
Note: make sure AC adapter plug in when performing gauge reset, and do not close the system while performing.
 
Regards,
Sameer





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies