Computer Support Forum

X1 Carbon lock to LTE

Question: X1 Carbon lock to LTE

Hello everyone, I have a Lenovo X1 Carbon 2014 with integrated Sierra 4G LTE modem and i have not found a place where i can lock it to a specific frequency - it keeps changing between 3,5G (HSDPA) and 4G LTE, but i would like to lock it to 4G LTE, because even with low signal it is faster than 3,5G. It is possible on the phones and 3G USB sticks, but nowhere did i find to lock it on my laptop. I am using Lenovo Access Connections and there are no such options. Is it possible to lock it somehow? A registry key? Some hidden options? Please help!

Relevance 100%
Preferred Solution: X1 Carbon lock to LTE

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: X1 Carbon lock to LTE

Anybody?

1 more replies
Relevance 54.12%

I have a seemingly simple question that I hope someone can help me with. On my new Thinkpad X1 Carbon, I know by using Lenovo?s Adaptive Keyboard software you can reassign the Home and End keys to be Caps Lock. However I want to know after I reassign them to be the Cap Lock key, where do I find my Home and End keys? Is there a special combination of keys for Home and End? My intuition tells me there has to be, otherwise it?ll be just stupid. But I can't seem to find out the answer. Thanks.

More replies
Relevance 54.12%

Has anyone else experienced the wireless locking up?  Lately I've been having wireless issues. It will still show it's connected but nothing will go through. Sometimes going into Airplane mode fixes it and sometimes a reboot fixes it.  Very strange though Thanks Josh

Answer:X1 Carbon wireless lock up

Any other information?  Is this happening at home, work, coffee shop?  Do you have any other devices nearby using the same AP that are working fine?  Are you using the Lenovo factory image or a custom OS install?

4 more replies
Relevance 54.12%

Hi Having a issue with Scroll Lock on the X1.I have talked with Lenovo support and they tell me that Fn + C should turn on and off Scroll Lock but that does not work. Have the latest Hotkey Features Integration for Windows installed and running Windows 7 Enterprise Sp1. If i connect a external keyboard i can turn on and off Scroll Lock with the Scroll Lock-key. Anyone with same or similar problem? /Magnus













Solved!

Go to Solution.

Answer:X1 Carbon Scroll Lock

Fn + K actually on X1 Carbon Also you can bring up the onscreen keyboard to turn it on and off.

2 more replies
Relevance 53.71%

I?ve recently bought a X1 Carbon with the infrared camera, which allows me to use Windows Hello facial recognition to logon, which works just fine. I use the Windows key + L to lock the laptop, but I?m finding with Windows Hello switched on, the infrared camera keeps searching for me. Does anyone know how I can stop the camera from looking for me when I lock the system? I looked in the settings just couldn?t see anything about disabling the infrared camera on system lock. Any help appreciated, thanks

More replies
Relevance 53.71%

When double tapping left shift, caps lock is turned on. I want to disable this functionality. I have already tried remapping left shift to right shift, but that doesn't work. I am using Ubuntu 14.04.

Answer:X1 Carbon 2nd gen - disable caps lock

Bump, any ideas?

3 more replies
Relevance 53.71%

Hi, there is an annoying feature in X1 Carbon, you must press twice the CAPS LOCK key to enable/disable. It is not compatible with all ThinkPad line. We need a feature to let customers choose traditional one key press for CAPS LOCK instead of 2 key clicks. I took 3 mintues more to type this message due to THIS ANNOYING FEATURE BY DEFAULT... and please guys do not say "disable it"... we are not microsoft basic users.

Answer:XI CARBON - ANNOYING Key Twice to CAPS LOCK

Hi emont,Thank you for your opinion. I have not found two split-second taps to be an inconvenience as opposed to one tap on one dedicated Caps Lock key.Perhaps the engineers will see your suggestion and consider it in future models.
 
Regards,
Bugbatter

2 more replies
Relevance 53.71%

The little LED on the shift key sometimes is on but Caps Lock is not on (all keys still in lower case). This is always the case when I log on freshly.  pressing Shift two times to enable Caps Lock (screen indicator comes on, ALL CAPS NOW) and pressing it two times again turns off Caps Lock as well as the LED indicator.  But sometimes it still behaves eradically. Any software update on this?













Solved!

Go to Solution.

Answer:X1 Carbon Caps Lock Indicator

I've noticed that too - so I turn it "off" but really I'm just turning it on, then have to turn it off for real.

9 more replies
Relevance 53.71%

I?ve recently bought a X1 Carbon with the infrared camera, which allows me to use Windows Hello facial recognition to logon, which works just fine. I use the Windows key + L to lock the laptop, but I?m finding with Windows Hello switched on, the infrared camera keeps searching for me. Does anyone know how I can stop the camera from looking for me when I lock the system? I looked in the settings just couldn?t see anything about disabling the infrared camera on system lock. Any help appreciated, thanks

More replies
Relevance 53.71%

Hi, is there a way to turn of the Fn Lock LED on the X1 Carbon? I am using the function keys all the time (as obviously most people do ) - and the little green light somehow annoys me ...  CheersVince

Answer:X1 Carbon 2015 turning off Fn Lock LED

Sorry for bumping this thread up - is there any way to programatically turn off the green FnLk LED?

1 more replies
Relevance 52.48%

UPDATE Hi, you can lock the "Fn" key through pushing the combination of both "Fn" + "Esc" keys. Kind regards,J_Peter_S ------- Hi, I searched intensively, but couldn't find the way how to activate the "Fn" key lastingly for this particular Lenovo X1 Carbon model. I have to use very often traditional F-Keys (e.g. F4, F5). Therefore, I'd like to lock the "Fn" key like on traditional keyboards. Please let me know how to lock the "Fn" key. Thanks in advance, and kind regards,Jochem





Lenovo ThinkPad X1 Carbon (Type 20BS, 20BT) 20BTS0W70E

More replies
Relevance 52.48%

x1 carbon black screen start up with lock icon... what can i do to use my computer again!! i guess i have to type in my password  beside the lock icon... but it is not working!!!Thank you !!

More replies
Relevance 52.07%

I have a X1 Carbon Gen 4 (20FB).
 
I have found that when I insert my microSD card, it won't lock.  I can close the cover and it barely has enough tension but it can keep the card in.  I was thinking of buying a large microSD to use as a secondary hard drive as my primary NVMe SSD is getting full and having the card come out at any moment isnt going to work for me.
 
Any tips on how I might fix this issue?
I am still under warranty but it is a hassle sending the laptop back for who knows how long
 
 
Moderator comment: Model added to subject for clarity.

More replies
Relevance 52.07%

Dear all, Does anyone knows if it is possible to turn off the function "holding down shift to activate Caps Lock"?When holding down the left shift for more than 5 seconds the caps lock is activated. Can this be turned off? regards,Jayy

Answer:X1 Carbon 2 - turn off holding down shift to activate Caps Lock

Mine doesn't do that.  It only activates CAPS LOCK if I press it twice fast.   Holding it down does not do it.

8 more replies
Relevance 52.07%

I have a X1 Carbon Gen 4 (20FB).
 
I have found that when I insert my microSD card, it won't lock.  I can close the cover and it barely has enough tension but it can keep the card in.  I was thinking of buying a large microSD to use as a secondary hard drive as my primary NVMe SSD is getting full and having the card come out at any moment isnt going to work for me.
 
Any tips on how I might fix this issue?
I am still under warranty but it is a hassle sending the laptop back for who knows how long
 
 
Moderator comment: Model added to subject for clarity.

More replies
Relevance 44.28%

Hello! Since the most recent build of W-10 (9879), my caps lock, num lock, and scroll lock lights do not function on either computer on which I have W-10 installed (a desktop with a USB keyboard and a laptop with an integrated keyboard). The keys still work to correctly toggle the functionality, but the keyboard lights don't work. In case it matters, my keyboard's actual backlights and my mouse's internal light (not the laser, the internal LED) are working correctly, it's just the CL, NL, and SL indicators that don't function.

Anyone have any ideas for fixing this?

Answer:Caps lock, num lock, scroll lock lights no longer function

Welcome to Windows TenForums, Vaindil.

It doesn’t seem to work on anyone’s system and there doesn’t seem to be a fix yet. You can read here into the beginning of the next page if you like.

https://www.tenforums.com/general-dis...tml#post167249

18 more replies
Relevance 44.28%

what to do when a dell latitude d630 laptop is not on but cap lock, num lock and scroll lock is on and i'e tried to check the VGA and the processor

More replies
Relevance 43.46%

For some time now, i have been experiencing that my Num Lock, Caps Lock and Scroll Lock all lights up (not blinking) all at the same time, I tried to google it but i can not find any solutions or explanations for it.

Does anyone know if it is bad? and what is causing this?

I am having a wired keyboard with nothing fancy just a standard issue Logitech keyboard.

Answer:Num Lock, Caps Lock and Scroll Lock all lights up (not blinking)

Can you toggle those functions off, one at a time? Sometimes restarting the computer will use the last state it was in, I'd fully shut down and pull the power cord from the computer and the keyboard cable then put them back and try again.

2 more replies
Relevance 43.46%

Hi,

how to disable Caps lock, num lock, scroll lock screen messages?



I have desktop pc with two keyboards usb and bluetooth. Also TOSHIBA Bluetooth Stack software, but in device manager: keyboard > hid keyboard device both using microsoft drivers. And I dont have any software installed for keyboards. Also bluetooth has separate system tray indications (it is also disabled) so its not that. I made some googling and found other fix it with Hkey_Local_Machine\Software\Widcomm\BTConfig\General KeyIndication set to 0, but I dont have it in registry. Acualy I dont have anywhere in registry KeyIndication. So any ideas how to disable it? Thanks

Answer:Caps lock, num lock, scroll lock screen messages

Hi,

You'll find that the messages are controlled by a piece of software that came pre-installed on your machine when you bought it. Try looking for a Hotkey managing app to see if the notifications can be disabled.


OS

9 more replies
Relevance 43.46%

I'm using an HP Pavilion dv6000 Notebook series. I noticed that my Caps Lock LED is not working but its FUNCTION is working fine.. same goes with Scroll Lock. Here's the weird part.. when I press Num Lock ( function key + scroll lock ) the LED turns on! I already tried a system recovery, it didn't solve the issue. Is there something wrong with my BIOS? Any help from you guys will be highly appreciated.. thanks!

Answer:Caps lock & Scroll Lock LEDs not working but Num Lock is wor...

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly.  Try performing a hard reset first, if it doesn't work then try updating your BIOS.  If neither works...It's pretty much dead and not worth fixing.  To Perform A Hard Reset Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for  5 seconds)Disconnect the AC Adapter from the notebook.Remove the battery from the bottom of the notebook.  There will be a switch/button to eject the battery.Wait at least 1 minute with all power sources disconnected.Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

9 more replies
Relevance 43.05%

Hi, I bought my Carbon Touch looking forward to activating with Verizon and replacing my current 3g ipad.  After hours trying to figure out how to enable broadband, I find out that apparently the "touch" models don't offer it.  Can someone at Lenovo explain how they can have promotional materials like the page at http://www.lenovo.com/products/us/laptop/thinkpad/x-series/x1-carbon-touch/ that says "ThinkPad X1 Carbon Touch" and "Embedded 3G Connectivity" while not offering it at all? Then, I thought I'd return the Touch and get the regular Carbon, but I'm seeing now that, despite all of the reviews and promo materials that say otherwise, it doesn't support Verizon either.  How can this be true?  Just about every review that I read about these laptops is flat wrong on these topics.  What's the scoop? I tried calling technical support a couple of times and they were of no help.   

Answer:X1 Carbon Touch WWAN (Carbon does not support Verizon and Carbon Touch has no 3G at all)

jprny,
 
Welcome to the Support Forums! I can definitely understand your confusion and I know you must be frustrated. I can clarify that the WWAN is optional in the X1 Carbon, from the same link you provided you can open the ThinkPad X1 Carbon Touch Ultrabook Specs it states there is Optional 3G WWAN.
 
Here is the the X1 Carbon Personal Systems Reference (You will find the X1 Carbon Touch on the very bottom)
This shows the different models of the X1 Carbon and what specifications are included. Unfortunately, I only see AT&T as the 3G provider on the standard models. From the Parts List it looks like there are other options to choose from that would make it a configured to order machine. You may want to contact Verizon to see if any of the WWAN cards work with their network.
 
I would recommend contacting the after sales team:
For Post-Sales Inquiries
Please call 1-866-42-THINK (1-866-428-4465) Monday - Friday 9am - 7pm EST
 
Example: (I dont know what your exact machine type is)

 
I really do understand your frustration, I hope you found this helpful.





Thank you for being a part of the Lenovo Family,Catie--------------------------------------------------------------------------------Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with ... Read more

2 more replies
Relevance 41.82%

The volume is set to 10/10 and I get a lock sound when I lock it using the power button. Does this mean that Touch Lock does not actually lock the phone?

More replies
Relevance 41.41%

Is the SSD upgrade procedure the same as the old X1 Carbon ? What is the part number for the current 512GB SSD module ?













Solved!

Go to Solution.

Answer:New type X1 Carbon SSD upgrade to 512GB - Same procedure as old X1 Carbon ?

Read these documents:http://download.lenovo.com/parts/ThinkPad/x1_carbon_gen2_fru_bom_20140505b.pdfhttp://download.lenovo.com/pccbbs/mobiles_pdf/x1carbon_2_hmm_sp40a26110.pdf

4 more replies
Relevance 41.41%

Hi, after four weeks my brand new X1 carbon failed out and it doesn't boot anymore.I've tried several times but after pressing the on button it  just pulses the kyeboard back-light but do not start. Only resetting with a pin in the back hole it quite.I called the help desk and they opened a claim.Today, after 10 days waiting, they told me that the mother board will be available not before May 1st!!! sure they offered for my patience one more month of warranty period!!!Is anyone having the same issue? how can I contact some else in the customer support team to help me solving the problem?I bought the new pc to work not to waste time to be in touch with a no hepfull unknown person somewhere in the world!!!

More replies
Relevance 40.59%

I've been looking for a small, easily pocketable charger. Often the space occupied is mostly by the power cords, so I've been considering wall chargers where the brick directly plugs into the wall, such as the Targus APM69US - but I can't find any that have the new rectangular Lenovo tips. Any suggestions? Thanks!

More replies
Relevance 40.59%

I used the 1st gen X1 Carbon for a while and found out that it's very robust and the touch feeling is very good. I guessed that all sides (A+B+C+D) of it are made by carbon fiber. Correct me if I'm wrong. But when I use my X1 Yoga 1st gen, which has only carbon fiber on A side (the cover behind screen) and uses "Super Magnesium" on C+D sides (the cover around keyboard and behind the keyboard), this design bring several problems: 1. " Super Magnesium" is still metal, if you crash it by accident, you may leave a scrath on it permanently, this happens more on edges;2. what's more, the paint at the edge of " Super Magnesium" will be rubbed away with time goes on, and you will see the white metal not the ThinkPad black;3. metal will suffer from deformation by force;4. the D side of my X1 yoga feels loose when you hold it with one hand, which make you feel cheap of this $1500 machine. Thus I hope the next gen of X1 Yoga or X1 Carbon can provide a pure carbon fiber version, for better build quality and user experience. How do you guys think about it?

More replies
Relevance 40.59%

I used the 1st gen X1 Carbon for a while and found out that it's very robust and the touch feeling is very good. I guessed that all sides (A+B+C+D) of it are made by carbon fiber. Correct me if I'm wrong. But when I use my X1 Yoga 1st gen, which has only carbon fiber on A side (the cover behind screen) and uses "Super Magnesium" on C+D sides (the cover around keyboard and behind the keyboard), this design bring several problems: 1. " Super Magnesium" is still metal, if you crash it by accident, you may leave a scrath on it permanently, this happens more on edges;2. what's more, the paint at the edge of " Super Magnesium" will be rubbed away with time goes on, and you will see the white metal not the ThinkPad black;3. metal will suffer from deformation by force;4. the D side of my X1 yoga feels loose when you hold it with one hand, which make you feel cheap of this $1500 machine. Thus I hope the next gen of X1 Yoga or X1 Carbon can provide a pure carbon fiber version, for better build quality and user experience. How do you guys think about it?

Answer:Pure carbon fiber for X1 Yoga and X1 Carbon?

HelloThe small carrections about the case materials, according to the laptop specs.x1c gen1Display cover: Carbon Fiber;Bottom: Magnesium/Aluminumx1 yoga gen1Carbon-Fiber HybridSo, IMO the question isn't material itself related only, but the case parts painting quality.

1 more replies
Relevance 40.59%

I was considering getting this laptop , probably leaning toward the touch version.  But display quality is really important to me, I do much software evelopment so i stare at thescreen a lot of course  I know this is not IPS panel, but more like the TN panel used in MacBook.   How does it compare to Macbook dispay (non retina). is it, worse,the same, or better? 

Answer:Display quality of X1 carbon / X1 carbon touch

I haven't spent much time on a newer MBP, but it's very equivalent to a MBP a few generations back, but is brighter. It's for sure usable, and while IPS would be prefered, I can easily live with it daily.

3 more replies
Relevance 39.77%

On my task bar I used to have visual aids to see when cap locks etc was on or off, now they have dissapeared?It is a pain when entering passwords with caps and lower case.Can anyone tell me how to turn them back on please?

Answer:CAPS LOCK, NUM LOCK, or SCROLL LOCK

Doesent caps lock light come on when you press Caps Lock?

4 more replies
Relevance 39.36%

Folks - I have two X1 Carbons sitting in front of me, both running Windows 8.1, trying to connect to my Samsung TV.The X1 Carbon (2014) has display corruption on WiDi, while the X1 Carbon (original) works fine. On the 2014 X1 Carbon, you get display corruption, and choppy squeaky audio every few seconds. With the original everything is smooth as silk. Any thoughts? I've already run Lenovo System Update on X1 Carbon (2014) as well as Windows Update, so everything is up to date. Don't know what else to try? Clearly, it's not the TV, nor the router, nor interference - since one machine works and the other doesn't... Thanks!  

More replies
Relevance 39.36%

Does anyone know whether the displays of either the X1 Carbon or X1 Carbon Touch currently available on the Lenovo website are IPS, and if not, what panel type they are? The sales reps have told me conflicting things. On the product configuration screen, the display types are listed as 14.0" Premium HD+ (1600x900) LED Backlit Display, 720p HD Camera, No WWAN and 14.0" MultiTouch Premium HD+ (1600x900) LED Backlit Display, 720p HD Camera. No WWAN respectively. It's my understanding that in the past, the phrase "Premium HD+" has meant IPS. Also, if someone from Lenovo is reading this, could you please ask somebody in engineering who actually knows?

Answer:X1 Carbon / Carbon Touch Panel Currently IPS?

No, it is an outdated low resolution TN panel again with better than Lenovo usual almost zero contrast (below 150:1). Quote from Lenovo shop:Multitouch Premium ? Optimized for Windows 8, 10-finger touch on select ThinkPad models allows for fluid tablet-like interaction. Intuitive navigation enables browsing, scrolling, using apps, even gaming, with a simple swipe of the touchscreen. A capacitive touch panel trigger actions immediately, and the cursors follow your fingers around the screen without any perceptible lag or delays. Review http://www.notebookcheck.net/Review-Lenovo-ThinkPad-X1-Carbon-Touch-Ultrabook.89901.0.htmlLP140WD2 TLE2, TN LED, Contrast: 885:1 





__________________________________ThinkPad (1992 - 2012): R51, X31, X220, Tablet 8.Do you care about privacy and security ? Leave Google behind

4 more replies
Relevance 39.36%

would anyone happen to have a picture of the x1 carbon lcd lid thickness next to the carbon touch? maybe lead_org i know you have access to many thinkpads and i am a fan of your flicker thank you for have made such a great resource! looking to do a custom mod where i fit the regular carbon lid on my multi-touch lcd to get the battery indicator lights and also have the red "i" in the thinkpad logo glow with a mutlitouch pannel, but concerned about the depth for the lcd and thickness... anyone have any experience or ever try it? any input would be greatly appreciated.

Answer:X1 carbon lcd lid thickness vs carbon touch

does anyone have a side by side comparison of the lids so i can get an idea if the touch screen has more depth or if its just the rubber border that snaps in around the lid that is thicker? does any IT manage out there have access to snap a pic of a non touch and touch x1 one side by side? im looking to at least get a visual but i only have access to my x1ct... any help would be greatly appreciated.

1 more replies
Relevance 38.54%

Been going back and forth and can't seem to find a screen that can replace my Thinkpad x1 carbon 3460 1f4 screen. Have found one for the 3448. Don't know if they use the same screen and pins?  See photo for description of the replacement screen I'm looking at.  













Solved!

Go to Solution.

Answer:Can the Thinkpad x1 carbon 3448 laptop screen replace a Thinkpad x1 carbon 3460 1f4

The 3448 and 3460 machines use the same panels, hinges, lid, cables, etc.

2 more replies
Relevance 38.13%

I'm using Ideapad Y570 and I've found that My Caps lock,Num lock & Hard disk drive indicator didn't work, while other indicators work properly. Does anyone have some solution for this problem?
 
 P.S. My O.S. is Windows 7 64 bit
 
Thankyou
 
posts merged 













Solved!

Go to Solution.

Answer:My Caps lock,Num lock & Hard disk drive indicator aren't work

Anybody knows? Please Help

9 more replies
Relevance 38.13%

When i try to wake my phone up, it shows "resuming" for two or three seconds and then displays the lock screen. Is anyone else facing this issue ? Is there any solution to this problem ?

More replies
Relevance 38.13%

I was on my Y560 Model 0646 checking my email and the computer shut off on me.  I went to turn it back on and it does not turn on.  The caps lock and number lock light up.  Blue tooth, Battery, and Video status all light up above keyboard in status area.  None of the fans are going, and it does not sound like anything is running.  I tried removing the power and battery and pressing power button a few times.  Also tried to remove power and battery and holding down power and nothing.  It's almost like it freezes.  I can push the mute button and it lights up, but then cannot turn it off.  Please help.  Laptop just went out of warranty last month.

Answer:Y560 will not turn on. Caps Lock and Number lock light up but not fans or boot

I'm guessing it is because of the motherboard. Since it is out of warranty can a Y560 motherboard be purchased anywhere? Any ideas? Please help.

7 more replies
Relevance 38.13%

id like to know if I can create a lock screen when my computer boots up to completely lock it from a very advanced user? Or any other ideas would be great. I'd like to know when im not home my computer is completely locked from my very spying boyfriend! I live alone, but sometimes he's here while im working. Im using windows 7 home premium. Thanks ahead of time for any ideas
 

Answer:would know if ican setup a lock screen wheny computer boots up to completly lock it .

Re: would know if ican setup a lock screen wheny computer boots up to completly lock

Don't log in :-D

Use a very difficult password. We have plenty of password generators on majorgeeks.
Enable the system admin account and password protect it.
Those two are probably enough. How advanced is he?
 

9 more replies
Relevance 38.13%

While following instructions in manual, it tells me I need a lock code. Where can I find it?
"Lock Mode
When the phone is in Lock Mode, restrictions are placed on phone use. You can
receive calls and messages, but cannot place outgoing calls (except for emergency
numbers) until you unlock the phone. Lock Mode also restricts access to menus and
the volume key. Your phone’s Lock Code is required. To access Lock settings:
From standby mode, press Menu ? Settings ? Phone Settings ? Security ? Lock
Phone."

Answer:SAMSUNG R451c Lock Mode Cannot find my phone’s Lock Code.

Isn't it a (4 digit?) code that you create yourself, or is there a default code already set?

2 more replies
Relevance 38.13%

I went into Ease of access center, Make the keyboard easier to use, and turned on toggle keys to make sounds when I hit these keys - Caps lock, Num Lock and Scroll Lock - but I get no sound when I hit any of these keys. What is the problem?

Answer:toggles keys selected to make sounds for Caps Lock, Num Lock

is the system volume up

Check Toggle Keys and hit apply

6 more replies
Relevance 38.13%

My Toshiba satellite c650d seems to have power...the on button is green. The screen is black, the numbers and caps lock lights are on and wont go off. The disk drive makes the usual booting up noise but that is all she does. Ive unplugged and removed the battery and that did nothing. I cant even turn it off with the on/off button to remove that battery and then turn it on again. I removed and reinserted the memory (both) and I can't take the hard drive out, its held in by a screw. Is my "friend" dead?

Answer:toshiba satelite c650d caps lock light, number lock is on an

If, as it sounds, it is booting up but not ever displaying anything on the screen, check the cable between the motherboard and the screen. It might just be one of the connectors (at either end) has worked loose. With the computer well booted up, move the screen gently down to nearly closed. If you ever see anything on the screen then it could be the cable is faulty where it hinges.Always pop back and let us know the outcome - thanks

2 more replies
Relevance 38.13%

I have a Ideapad Y560P that shut down suddenly and when we tried to turn it back on, the Caps Lock and Num Lock (on F8 key) lights go on but the computer does not start. I saw a similar thread from 2010 but there was no resolution. I assume that the two lights on at the same time at attempted start indicate some kind of "fault" condition in the computer. I have not been able to get the bios to start so that I could run diagnostics. I pulled the battery and held down power for 30 seconds, pressed start twice, put the battery back in but still won't start. I pulled memory out, trying to get a POST "beep" error but that didn't occur. I put memory back in one dimm at a time. I pulled the Hard Drive out and put it in an external enclosure and was able to extract the information to another laptop so I'm pretty sure I didn't have a hardware Hard Drive failure. Other than the one reference in this forum I haven't seen any information about this kind of, what I assume is a, hardware failure. I assume that Lenovo has some kind of guide that tells them what the lights mean. The computer was about six months out of warrenty when it failed. I called Lenovo to attempt to extend the warranty but they won't once it is out of warranty. Looking for some idea of what failed, whether it is worth getting one of Lenovo's listed companies that repair laptops to look at it and fix the problem.













Solved!

Go to Solution.

Answer:Lenovo Ideapad Y560P Will Not Boot. Caps Lock and Num Lock lights on.

MiKershaw wrote:I have a Ideapad Y560P that shut down suddenly and when we tried to turn it back on, the Caps Lock and Num Lock (on F8 key) lights go on but the computer does not start. I saw a similar thread from 2010 but there was no resolution. I assume that the two lights on at the same time at attempted start indicate some kind of "fault" condition in the computer. I have not been able to get the bios to start so that I could run diagnostics. I pulled the battery and held down power for 30 seconds, pressed start twice, put the battery back in but still won't start. I pulled memory out, trying to get a POST "beep" error but that didn't occur. I put memory back in one dimm at a time. I pulled the Hard Drive out and put it in an external enclosure and was able to extract the information to another laptop so I'm pretty sure I didn't have a hardware Hard Drive failure. Other than the one reference in this forum I haven't seen any information about this kind of, what I assume is a, hardware failure. I assume that Lenovo has some kind of guide that tells them what the lights mean. The computer was about six months out of warrenty when it failed. I called Lenovo to attempt to extend the warranty but they won't once it is out of warranty. Looking for some idea of what failed, whether it is worth getting one of Lenovo's listed companies that repair laptops to look at it and fix the problem.HiIn my experirience, these two lights don't mean anything specifically.The only good and co... Read more

3 more replies
Relevance 38.13%

Looking for a Free Num Lock and Caps Lock indicator software? Download 7Caps.
7Caps is a very small application that aims to notify you in real time whether the status of the Num Lock or Caps Lock keys changes
Download it from its home page. TrayStatus also lets you enable status indicator for Keyboard keys.

More replies
Relevance 37.72%

i recently encountered a small problem with the onscreen display when trying to turning some functions on and off. i've noticed that when i tried to turn caps on, it does not display the "Caps On" on the lower right bottom of the screen. i just want to know if anyone have encountered this problem or could solve it. as an obseravation, i noticed that the display disappeared ever since i install word 2003. thank you.





Thinkpad X61: 7675-CTO, T7500 NV, 1GB RAM, 120 HDD, 1GB Turbo Memory, VIsta Business

Answer:Onscreen display not working for Caps Lock or Number Lock

Hi ! Same for me, but LED is ok for me.  





Thinkpad X41: P M 778(1.6GHz), 1GB RAM, 60GB HD, Intel 900, Intel 802.11abg wireless, Bluetooth/Modem, 1Gb Ethernet, Secure chip, Fingerprint reader,X4 UltraBase + CDRW/DVD, WinXP Pro

6 more replies
Relevance 37.72%

Hello guys,

I recently upgraded to Windows 10 and I am having some issues.

First one is: When I click jpg, gif, or any image files that uses the photo viewer as a default viewer, photo viewer pops up twice, one with the file I selected and one with the collection screen. It only does this on the first view of a image file after reboot. Once it does this, it doesn't do it until I reboot.

Second one is: I use a PIN as my login password. The number lock on the log in screen doesn't work. I almost always have to press NUM Lock button in order to use the number key pad. I checked the BIOS setting and Num Lock is on.

I will be appreciate any help.

Answer:Photo viewer pops up twice and number lock doesn't lock on log in

skyblue said:

Hello guys,

I recently upgraded to Windows 10 and I am having some issues.

First one is: When I click jpg, gif, or any image files that uses the photo viewer as a default viewer, photo viewer pops up twice, one with the file I selected and one with the collection screen. It only does this on the first view of a image file after reboot. Once it does this, it doesn't do it until I reboot.

Second one is: I use a PIN as my login password. The number lock on the log in screen doesn't work. I almost always have to press NUM Lock button in order to use the number key pad. I checked the BIOS setting and Num Lock is on.

I will be appreciate any help.



You've posted 2 different problems that should have been separate posts. I don't have a solution to the first but the second is probably because the keyboard driver has not yet loaded before getting logged in. I saw the same during setup of a new ASUS Notebook just yesterday that came with Win8.1. Disconcerting was the lack of a light or screen indication that the NumLk key had been pressed, just noticed the same is occurring on my Dell Inspiron 15R that has been Upgraded to Win10 although it is a rescued/rehabbed Notebook, it does have the light on the front edge of the case, just does not turn on.

1 more replies
Relevance 37.72%

Hi,

My errors are a freezing cursor - dead mouse on every other reboot ..and.. With file transfers from one HDD to another I will frequently get a system lockup of Windows (forcing me to reboot. hard reboot). My System is CLEAN of viri and trojan as wella s spyware. I Have WinXP Pro Sp2. Running Zone Alarm Pro v6, Eset NOD32 v2.5, Webroot Spysweeper (for coookies and alt scans), Spyware Doctor v.3.2.1.359 (resident), and Trojan Hunter v4 (also resident on boot). I am also booting and browsing with Pop-Up Stopper Pro. My Hardware? Abit NF7-S rev.2, Athlon 3200 Barton core, Best OCZ 400Mhz RAM (?) - 1Gb in dual channel, Audigy 4 Pro for sound. Latest drivers for all "to best of my knowledge" Any Helpers? :)

*More on the file tranfer lock-ups. The two other drives are Seagate drives and identicle. They're 300 Gb each... I have not reformated them since my last Windows reinstall - they were detected right off.

Could be Windows isnt seeing those drives for what they are?? Even worse, a bus problem?

Thank you in advance.

Answer:Mouse Lock-Up (not there on boot) and Windows Lock-Up Transfering Files HDD to HDD.

have you tryed running safemode? is it the same?
run a chkdsk: start > My Computer > right click the drive u want to scan > properties > tools > error checking - Check Now > put tick in both boxes > click start > click to scedule on next boot > restart

see if it returns any errors or corrects this

3 more replies
Relevance 37.72%

My friends dv7-1135nr is not posting. The num lock and caps lock led light will flash once every 2 seconds at the same time. According to HP this issue is a " not functional" cpu. I am ordering another cpu for 16.00 off ebay because this is cheaper opposed to ordering another board. Anyone else have this issue? And if so did you fix it ?
 

Answer:dv7-1135nr black screen caps lock/num lock flashing

6 more replies
Relevance 37.72%

I have a Satellite C660 which was working fine this morning. When I returned from work and powered it on, the entire keyboard is not working and therefore cannot enter my login details.
The Num lock and Caps lock are lit.

Any ideas on how to resolve this?

Answer:Satellite C660 - keyboard is not working but Num lock and Caps lock are lit

Hi

Are you able to disable the CapsLock and NumLock?
Can you access the BIOS pressing F2 while powering up the unit?

If this does not work, I would recommend checking an external USB keyboard.
If the USB keyboard would functions, then this means that the internal keyboard is faulty and needs to be replaced.

3 more replies
Relevance 37.72%

Hi, new to these forums, hope I don't break any rules or anything here.

My laptop is a
Sony Vaio - Model: SVE141R11L
Product name: SVE14135CXB
Pre-loaded with Windows 8 x64
Intel(R) Core i5-3230M CPU @ 2.60GHz
6GB RAM w/ 900GB HDD space
Purchased in Navy Exchange last year (around July 2013)

I have dropped it once or twice from at most a 3ft fall inside a padded case. I mostly use my computer for school work, some gaming, extensive video/photo editing, internet browsing. I've installed some debatable programs but have been installed long ago. Most of my programs included Microsoft Office, Adobe suite, Steam, iTunes, uTorrent, McAfee VirusScan Enterprise, Winrar, VLC, etc. But are now gone due to the refresh I had just done last week for prior problems, but still experience problems.

I recently been having issues with my computer where it just won't respond at all. Like today, I had it working for a few hours, but then went out and left my laptop on the lock screen, and came back to it being completely stuck. Completely stuck as in, no keys or clicks would unlock the screen to the login prompt. However, my cursor was fully able to move around the screen, and my caps/num lock buttons work as they display the lights enabling/disabling them. The time when it was stuck was 8:03pm, but the clock was stuck on 7:55. But on the bottom of the front of the laptop, the HDD orange light is not lit up at all, which I believe suggest that the HDD is not reading/properly reading. Oddly e... Read more

Answer:Windows 8 Lock Screen Stuck, Cursor/num/cap lock work

Sounds like one too many drops killed the computer. You may get lucky and find a local mom & pop shop that will fix it cheaper then Sony.

3 more replies
Relevance 37.72%

I have G500 laptop running windows 8.1 64 bit.  I have noticed that there is no indicator light for when num lock is on.  The light on the front of the computer under the touchpad comes on when caps lock is active, but not for num lock.  Is there any indicator for num lock on this computer?

Answer:G500 indicator light works for caps lock, but not for num lock

Hi Kimikat730,
 
Welcome to Lenovo Community!
 
I?m sorry to inform you that there is no other indicator in G500 Laptop for Num-Lock key.
 
Do post us back for further queries.
 
Best Regards

Shiva Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 37.72%

Not a techie.  Can't get straight answer ANYWHERE.  New laptops tend to NOT have indicators on the keys.  Hoping Windows 10 has indicators that can be turned on and PROBABLY would show up in the tray at the bottom right of the screen. 
I have heard of sites where such things can be downloaded but again NOT a techie, so I hesitate to go outside of Windows/Microsoft for downloads.  I do not know what download sites are safe or spoofs.

Please plain English ... i.e. go to settings etc.  Or just give me a Microsoft approved site for download.
Dez/MJD

More replies
Relevance 37.72%

My recent purchase of the above All-in-One PC (running on Windows 10) included the Lenovo SK-8861 keyboard which has no lights for the CAPS LOCK and NUM LOCK keys. How do I get them to be displayed on the screen when pressed? When I went into Display Settings in Control Panel, I could not find the option to set them on or off.  so, based on the instructions on https://support.lenovo.com/gb/en/solutions/ht002122, I installed the Hotkey driver from http://support.lenovo.com/gb/en/downloads/ds031814.  When I now go into Advanced Settings under Display Settings and click on Screen Configurations, I can see the Enable on-screen display checkbox and the Appearance settiings but the expected Indicator Settings for NUM LOCK and CAPS LOCK aren't being displayed as expected. Can anybody advise what I need to do to enable these settings? Lenovo On-Screen-Display is listed under the Installed Programs in Control Panel. Many thanks.      

Answer:Displaying the CAPS LOCK and NUM LOCK indicators on the Lenovo AIO 510 Ideacentre

I do not have an answer for how to enable them via the control plane, but I can point you to a free tool called Keyboard LEDs that I have used in the past that when installed will put an indicator in the system tray, and will sound a tone  and display on screen if so configured in its settings.. Cheers,   

1 more replies
Relevance 37.72%

Well, I have no idea what caused this but the tablet buttons (even the on/off button) the lights for caps lock and scroll lock as well as the automatic screen orientation change when I flip it to be a tablet have stopped working.Also the screen does not turn off anymore when the lid is closed. Reinstalled pretty much all of the drivers, no effect.Any ideas? Is this thing already broken?

Answer:X41 tablet buttons + scroll lock and caps lock lights + screen orientation change stopped working!

well, SOMETHING is broken.. though it would seen unlikely it is hardware.. a question: did you load anything new just before this happened..?anything at all..scanner drivers or printer drivers or a new application..? OH!, welcome to the lenovo community..! 





Bill Morrow, kept by parrotsSysop - forum.thinkpads.comX300, T60p, X60s,X60T (sxga+), Transnote, MacBook Pro, iPhone, iPod----She was not what you would call refined.She was not what you would call unrefined.She was the type of person who kept a parrot.Mark Twain

4 more replies
Relevance 37.31%

I have an Athlon 650, 512 MB PC running Windows 2000 server edition running Internet Connection Sharing (for cable modem), and IIS 5.0 for several web sites. I also use it as a file server. I usually leave it just sitting there and just update things every once in a while. I don't even have a monitor hooked to it. Should I hit CTRL-ALT-DEL and click the "lock computer" or log out? Would this make it more secure somehow to hacks? I haven't had any problems yet, but I just want it secure as possible.

Any help would be appreciated!
Thanks,

Cory
 

Answer:Win2K server - ICS, IIS, etc... - should I lock the PC - CTRL-ALT-DEL -Lock computer?

According to what microsoft says, Yes, it will provide an added layer of security.
 

2 more replies
Relevance 37.31%

How do I get rid of the gray lock beside the irs.gov website and turn it into a green lock?
There are many websites referenced to tell one what the gray lock means, but none to tell you how to get rid of it.  Please help!

More replies
Relevance 37.31%

My hp touchsmart tx2 when I power on the display stays black but num lock and caps lock lights flash ?

More replies
Relevance 37.31%

I have a Acer Aspire 7750G-9411 laptop. I recently had to reload my operating system. since then the "on-screen " icon for the cap's lock and number's lock does not show up. I made sure to download and install all of the drivers but have been able to restore this one frature. Thanks for any help you can give me. Cliff

Answer:on-screen icon for Caps lock / number's lock is mi...

If you are using Windows 8, then it is important to note that the on-screen indicators for Num Lock and Caps Lock are not available in Windows 8. To know more about this, you can refer to the link below:http://acer.custhelp.com/app/answers/detail/a_id/30035/~/no-num-lock-and-caps-lock-indicator If you are using Windows 7, you can check if following the steps below helps:1. Click on "Start".2. Type keyboard in the "Search" field.3. Double-click "Keyboard options".4. Go to "Key settings" tab and then, go to "Key settings" list.5. Locate and double-click "Caps Lock" and select the option "Display Caps Lock status on screen". Click "Finish".6. Follow Step 5 for Nums Lock as well. Hope this will resolve your issue.

1 more replies
Relevance 37.31%

Hi. I recently bought a new R5-417T laptop, and in the process of personalisation found no intuitive way to disable the caps-lock or num-lock notifications. (Windows 10 btw)  ^Notification in question^ How would I go about disabling this? I've tried looking in the BIOS, in regedit and some mythical "Launch Manager" program bundled with older acer laptops that I can't find a working version for.

Answer:How to DISABLE Caps-lock and Num-lock screen notif...

Caps lock is thr Caps lock key.For Num lock try Fn and F11.

7 more replies
Relevance 37.31%

I have an HP Pavilion Laptop that is about 2 years old. I usually keep it in Hibernate mode but last night I shut it down totally and this morning woke up and the Caps lock and Num lock keys are blinking. Any clues as to what the problem is? All led lights on top are lit. Screen does not come up at all. I am going to try the hard reset to see if that is the problem. Any ideas would help.
 

Answer:Hp Pavilion Blinking Caps Lock and Num Lock keys

Hi, Welcome to TSG forums!
You might try booting it into safe mode....while computer is booting, continously tap the F8 key. This should open it in safe mode. If it does, use the arrow keys to move up to 'last known good configuration' click on enter, let the machine do its thing.
Let us know how it goes
Vicks
 

2 more replies
Relevance 37.31%

Lenovo Y720 So, when I hit caps ock or num lock an on screen display tells me whether capslock or num ock has been pushed. While I appreciate it is helpful for some, in my case it become a hinderance. You need to remove "num lock" for single key print screen request, and if I have a short time frame, I am stuck without being able to screenshot until the num lock indicator goes away.  How do I turn off the on screen display.  Now, before you send me to the previously asked questions of similar nature, I have tried. There is no "display settings" in Control Panel. There is no "advanced display settings" on the settings panel. And there is no way to control it through NVIDIA or Intel graphics settings (that I can see).  Thanks kindly. 

More replies
Relevance 37.31%

ANyone have aclue how to get these working again  i did a clean install of windows and for the life of me can't get these to work I've installed all drivers from the drivers page with no luck

More replies
Relevance 37.31%

I have a Vista home premium Thirty Two bit on a HP DV Six Thousand laptop.
A few days ago, I have no idea how, but the scroll lock has been turned on. This is also the num lock key. so now my down and right arrows don't work and neither do my number keys, except numbers 6 and 5. Please help. The signs that are doubled up with the number keys don't work either since the num ock is on. This is so frustrating. How can I turn this scroll lock / num lock key off?
Thanks in advance.

Answer:Unlock Scroll lock / Num lock keys on HP DV 6 Thousand

Welcome
How to Activate the Scroll Lock on an HP Pavilion DV6000 Laptop | eHow.com

1 more replies
Relevance 37.31%

Hi,I have an inspiron 9400 that has been having some issues lately. As of right now, when I push the power button, the power light comes on but it does not boot or even post. The Num lock stays on and the caps lock and scroll lock lights blink for about 40 seconds then the whole thing shuts off. This can obviously be only a few things but, how to I figure out what those blinking lights mean. I have search dell support but have found nothing. Any help is greatly appreciated.Thanks

Answer:blinking Caps lock and Scroll lock/ no boot up

Try reseating your RAM securely in their slots. I have read that blinking of any of the lock indicators is a sign of memory failure.

21 more replies
Relevance 37.31%

After installing windows 10 I no longer get the Caps Lock & Num Lock hot key indication on the screen for my Think Pad E550. 










Solved!
Go to Solution.

Answer:Hot Keys for Caps lock/Num lock indicator dont wor...

Hi DBooker,
 
Welcome to Lenovo Forums!
 
Try uninstalling and reinstalling the hotkeys from the device manager.
 
Please let me know whether the above step helped you.            
Thank you, have a good day.
 
Did someone help you today? Click on the ?upper half star? at the left side of the post to thank them with a Kudo!
 
Regards,
Naveen.v

3 more replies
Relevance 37.31%

Hello My notebook is not booting, the only sign I get is the Scrool Lock and Caps Lock lights blinking repeatedly three times. Important to mention that this laptop has a history of overheating and problems with its battery (battery was not charging anymore). Thank you very much.

Answer:Caps Lock and Scroll Lock blinking, will not boot up

Hello @FerrariLuis, Match the sequence of 'blinks' to those shown in the table below. Try to reseat the Memory     Hope this helps, for any further queries reply to the post and feel free to join us again !!  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 

7 more replies
Relevance 37.31%

Caps lock and scroll lock blinking, will not boot up 

Answer:caps lock and scroll lock blinking, will not boot up

Hi, Can you match the sequence of 'blinks' to those shown in the table below.  Can you post back with the full Model No. and Product No. of your notebook - see Here for a guide on locating this information. Regards, DP-K 

7 more replies
Relevance 37.31%

Hi, i've been reading through an endless amount of forum threads to figure out how to remove this caps lock indicator and have not been able to fix my problem. It seems every solution in the control panel does not fit, and no matter how much i look in Registry Editor I can't find the right folders. I don't have the Widcomm folders.  This is what I have tried. 1. unchecking any caps lock indication in the control panel.2. Looking through Registry Editor to delete/rename/alter files.3. Deleting and re-installing Lenovo Energy Manager. How is this problem fixed for me?  I am running windows 10, and a rather new Lenovo Y50 laptop

More replies
Relevance 37.31%

Hi, im using a Packard Bell butterfly touch and until recently this had been my linux machine with my full size laptop running windows, however with windows 8 I decided id utilize the touchscreen on this machine and have a swap around. Replaced Ubuntu with Windows 8 fine however now on some of my keys the fn key is reversed (Ive included a picture to show which keys). The keys affected imply that number lock is on, however it is not and i have ensured so using registry editor, stick keys is not on either.

Any help much appreciated as this is driving me mad and makes typing very awkward...

cheers
kez

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8 Pro, 64 bit
Processor: Genuine Intel(R) CPU U2300 @ 1.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3998 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family (Microsoft Corporation - WDDM 1.1), 1807 Mb
Hard Drives: C: Total - 670401 MB, Free - 482981 MB; D: Total - 29691 MB, Free - 26409 MB;
Motherboard: Packard Bell, SJM12-MS-CAP
Antivirus: Windows Defender, Disabled
 

More replies
Relevance 37.31%

I went to get my HP dv4 Pavilion laptop after work tonight to check email and i opened it up and moved around the mouse to wake it up...the lights on they keyboard all came on as if it were starting but the screen stayed black. I waited a few minutes because sometimes it's been known to take a few seconds to actually kick on...but nothing happened so I forced shutdown by holding the power button. Turned it back on and the screen came on(with a "your system didn't shut down properly error screen) but it still started, but now the Caps Lock and Scroll keys had blinking lights on the side and top, blinking together about every second. I tried tapping the buttons and nothing happened. What caused this and how can i get rid of the blinking. I've read from doing a google search that shutting down, taking the battery out and unplugging from the A/C adapter and holding the power button for 15 seconds takes care of the problem...but I would like to make sure that is safe before trying as this is a fairly new laptop(just got it at Christmas time). I'm running Windows 7 if that makes a difference. would also like to add that I just noticed that my little batter icon says it is plugged in but not charging....it's sitting at 80%....this is a brand new ac adapter that I just got last week...so I hope it's not that.Thank you for any help you can give me....and sorry if this isn't the right forum....it seemed to be the best fit.

Answer:Scroll/Num Lock and Caps Lock LED's blinking and battery not...

In order to help you further, could you please provide us with more information about your computer? Please post the specific model number or the (PN - Part Number) from the white tag on your computer. This will help us locate drivers and identify correct parts for your specific model. Make sure you've got the latest HP system BIOS installed.

9 more replies
Relevance 37.31%

Hello my friend.
i have a problem woth my EliteBook 8460p.
the caps lock and num lock blinks 4 times each time and then turns off totally.
what is the problem?..

More replies
Relevance 37.31%

On a Lenovo Ideapad 310 and have no idea how to remove the annoying caps lock and number lock indicator. I have tried to turn it off through the advanced settings on the display section however Windows 10 does not seem to allow that adapter screen and instead takes me to another screen that doesn't have the same settings.













Solved!

Go to Solution.

Answer:Caps Lock and Number Lock indicator removal for Wi...

This post offers a solution:https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Flex-3-on-screen-Caps-Lock-Pop-up/m-p/3...

1 more replies
Relevance 37.31%

How do I remove the Caps and Num Lock indictor for a Lenovo G50, that is running Windows 10?

Answer:Remove Caps lock/Num lock indicator? (Windows 10)

Hi Thisismyname01 ,
 
 
Welcome to the Community Forums. 
 
On a similar G50 , this was resolved by uninstalling Energy Management .
 
Another steps that was advised :
 
1. Opening Control Panel >Program and Features>Uninstall a Program and look for Caps OSD or Lenovo OSD 
 
2. On the display properties of the graphic card , you may also configure to "Show indicator for a few seconds" . 
 
3. Disable hotkeys from the BIOS ( but this may change all other usable hotkeys ) . Lets's reserve it a last option. 
 
Update us what works for you.
 
 
Regards,

1 more replies
Relevance 37.31%

Good afternoon,

I just did a clean install of 7 to fix errors with my laptop, and it fixed one, but not the other main issues,
My caps lock, and number lock button on the keyboard don't have a light on it and the pop up that is supposed to pop up doesn't show up on screen.
I figured by doing a clean install it would all magically appear again... I was wrong, I have tweaked everything I could think of looking/trying to change setting from the keyboard in control panel, (including messing around with ease of use) and Gateways so called "support" area was of no help, as well as googling the issue has led me down a path of useless tips, I have also looked on this forum for help.

Any help in this area would be GREATLY appreciated!!

Answer:Caps Lock/Num Lock, on screen pop up gone Gateway NV77

Ok, I have a problem I have set up the sound, and it does not play a sound.

1 more replies
Relevance 37.31%

Hi. I recently bought a new R5-417T laptop, and in the process of personalisation found no intuitive way to disable the caps-lock or num-lock notifications. (Windows 10 btw)  ^Notification in question^ How would I go about disabling this? I've tried looking in the BIOS, in regedit and some mythical "Launch Manager" program bundled with older acer laptops that I can't find a working version for.

Answer:How to DISABLE Caps-lock and Num-lock screen notif...

Caps lock is thr Caps lock key.For Num lock try Fn and F11.

6 more replies
Relevance 37.31%

Hiii there, I have just locked my personal folder through Priyan's lock but unable to unlock it again. An icon of Control panel is being shown instead of default icon. and when I am opening it, control panel window is shown. What to do? ***email removed*** It will be a great help as this folder contain very important personal documents. Please reply asap.
 

Answer:unlock folder lock protected by priyans lock

11 more replies
Relevance 36.9%

When you choose lock the taskbar, it does stop you from resizing sections of it but it doesn't stop you from doing other things, like re-arranging icons in the quicklaunch folder.

Is there any way I can lock the icon layout in quicklaunch? Sometimes I might accidentally drop something in there when I meant to be dragging it to do an "open with", or I might accidentally click as I'm moving my mouse over the icons and it drags an icon to a different position and I have to figure out where to drag it back to, and in the most bizarre Windows feature ever ... if I then shutdown and startup, despite having moved that icon back to it's original position, after startup it'll be back to the wrong position (that it only spent 3 seconds being in by mistake).

Currently I just have a screenshot of my icons and have to use that as reference to keep them in the places I want them. Example ( imgur.com/UjltgAh ):

Answer:"Lock the Taskbar" doesn't really lock it, how can I truly lock it?

This seems like it will do what you want if the bottom icon is considered the thumbnail but I think they mean the aero peek thumbnail.
http://rammichael.com/7-taskbar-tweaker

5 more replies
Relevance 36.9%

When you choose lock the taskbar, it does stop you from resizing sections of it but it doesn't stop you from doing other things, like re-arranging icons in the quicklaunch folder.

Is there any way I can lock the icon layout in quicklaunch? Sometimes I might accidentally drop something in there when I meant to be dragging it to do an "open with", or I might accidentally click as I'm moving my mouse over the icons and it drags an icon to a different position and I have to figure out where to drag it back to, and in the most bizarre Windows feature ever ... if I then shutdown and startup, despite having moved that icon back to it's original position, after startup it'll be back to the wrong position (that it only spent 3 seconds being in by mistake).

Currently I just have a screenshot of my icons and have to use that as reference to keep them in the places I want them. Example ( imgur.com/UjltgAh ):

More replies
Relevance 36.9%

Only third day of my new Gen4 X1 Carbon.  Sound works fine .. then there is screechy sound from the earbuds that were plugged into audio.  Now no sound, no matter what I do.  I do have on site support but what do all of you think?

More replies
Relevance 36.9%

these lights flash inconjuction with a pop down menu resembling a right click on the mouse that did not ocurr. At times the system will navigte backwards as if the back tab were hit when it was not

Answer:Flashing num lock and scroll lock lights

Manuals Dell Dimension 2400 Serieshttp://support.dell.com/support/edo...Service manual - viewhttp://support.dell.com/support/edo...Service manual - Advanced troubleshootinghttp://support.dell.com/support/edo...There's nothing in there about flashing num lock and scroll lock leds, but there's other info. ......Your system produces normal error beeps, or diagnostic error patterns of leds, rather than flashing leds on the keyboard to indicate errors. You could try searching for something such asDimension flashing "num lock"orDimension blinking "Num Lock"Many "hits" are for systems much newer than yours. Very few if any are for Dimension models. .......Have you tried a different keyboard ?....."these lights flash inconjuction with a pop down menu resembling a right click on the mouse that did not ocurr"What words are on the menu ?........My guess would be your power supply is failing.If the leds flash BEFORE the operating system loads, it probably IS failing. If you can borrow a power supply to try with your system, try connecting that. ............Or failing capacitors can cause all sorts of weird symptoms. Open up your case and examine the mboard to see if you have bad capacitors, and/or other findable signs of mboard damage .What to look for, mboard symptoms, example pictures:http://www.badcaps.net/pages.php?vid=5Home page that site - what the problem is caused by- he says there are STILL bad capacitors on more recent mboards.http://www.badcaps.net/Pictures of blown ca... Read more

14 more replies
Relevance 36.9%

Ok I've been suffering this issue with Windows 10 for as long as I can remember, and it's stopping me using it as the primary OS.

In short I have two, intermittent issues which nothing I do seems to resolve.

1: After waking up from sleep and typing my username password and hitting return, the screen goes black. Cursor moves, Windows + P operates (Screen options do appear from the right) but doesn't actually make any difference, and I'm stuck having to hard reset because ctrl alt del doesn't work either. This isn't an every time issue, hence googling seems to fail miserably because all the examples are people getting it every time. This, for me, is a 3 in 10 regularity.

2: Logging a user off occasionally sees the lock screen ... locking up. Ironically. Mouse moves, and power button DOES work but that's all that works.

These issues are plaguing me and I just cannot fix them - endless googling has left me empty handed, and I've tried disabling SLI. No help. I've tried disabling apps. No help. Nothing I do makes any difference and event viewer doesn't seem to reveal anything useful either.

Anyone got any idea how I can resolve this?

System is:

132GB SSD OCZ
2TB Seagate HDD
4790K
2x980Ti SLI
32 GB RAM @ 1800 Corsair
Asus Z97-A
Windows 10 & Windows 7 dual boot 64.

More replies
Relevance 36.9%

--

Hello.

I need a mouse lock / pointer lock button on my website like this one called Interactive Example in the link.
Work only in FF or chrome.

http://www.html5rocks.com/en/tutorials/pointerlock/intro/

I can't find the script in the web page so maybe you can find it?
Or can anybody tell me how to get a Mouse lock / pointer lock script that generate the mouse coordinate view?

Regards MagI
--
 

More replies
Relevance 36.9%

why is my caps lock and scroll lock flashing? is there's a problem whit my laptop? my laptop is compaq with window vista..how to resolve the problem?

Answer:caps lock and scroll lock blinking

Might be a ram issue try either removing one at a time if you have two.If not then try reseating the one installed and also do a memory diagnostic test.

2 more replies
Relevance 36.9%

Hello! Recently, I turned on the on screen indicators for caps and num lock by accident when trying to get the pop-up window to stop opening every time I hit one of the buttons. Now I don't know how to disable it, and it's a pain while playing games. Solutions tried:Going to preference, there is no "On-Screen Display Tab"Going to run the regedit. Any help would be appreciated!












Solved!

Go to Solution.

Answer:Y50 Remove Caps lock/Num lock indicator?

hi Vilvern,
 
Welcome to Lenovo Community Forums!
 
AFAIK,
  If the system does not have CAPS OSD under Control Panel / Uninstall a Program to uninstall
You will need to Uninstall the Lenovo Energy managemenr Under the Programs / Uninstall a program.
 
Regards
Solid Cruver




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Relevance 36.9%

sir i really want to know that why windows phones are so behind to android phones. Till now you were not been able to provide us with patern lock or seprate locks for different application, so that i can secure my personal things with a another lock system. even in new window 10 preview there is no option of this type or lock. why you are so behind to android, atleast provide use with different apps lock system so that if onces my phone is been unlock then also i am ensure that my personal files could not been open. when these facities will be provided to us, when we all switch to android phones.

Answer:About Pattern lock & Separate Application Lock..

Originally Posted by tangledW There's no pattern unlock on iPhone either.
Just go buy an Android if it's so important to you, but don't act like your files aren't secure without it. There's still the code lock, and Windows Hello features are coming as well. How many Androids have retina scan unlock?

3 more replies
Relevance 36.9%

I just bought a Thinkpad Yoga 14 and a Kensington lock (that is a suggested security accessory by most official Lenovo resellers for this model !!). The problem is that I can't find a slot to plug the Kensington lock. Is there something that I am missing?I hope that Lenovo is not offering a series of 'professional' laptops without one of the most needed features for professionals that have to work with sensitive data on clients' sites and uncontrolled environments! 

More replies
Relevance 36.9%

Even when I am typing this message it becomes difficult if my G 570 has the num lock on or off, same thing happens with caps lock. Have to guess all the time and correct the typos.. NONE OF THE  LIGHTS - CAPS LOCK OR NUM LOCK IS WORKING. DURING BOOT UP AND JUST AFTER BOOT UP, THE LIGHTS SEEM TO WORK PERFECTLY, BUT AFTER STARTUP THE LIGHTS BECOME COMPLETELY DEAD! difficult working with guessing business and toggling these always basing on trial and error..  PLEASE HELP!

Answer:CAPS LOCK AND NUM LOCK LIGHT NOT WORKING ON G 570

hi SD_musician,
 
Can you try to:
 
1. Check this registry fix to disable or enable the Num Lock key at startup
2. Referring to this article, try to press Fn+F8 to enable numlock at the Windows login screen then press the power button to shutdown / restart the PC.
3. Check for an updated BIOS from the lenovo website to fix both capslock and numlock issue (press Windows Key+Rt > type msinfo32 then press Enter to know your BIOS version).
 
Note:
Backup your important files and follow this readme instructions before updating the BIOS.
 
 
Let me know your findings.
 
Cheers.

6 more replies
Relevance 36.9%

Dear team,                                           I have HP Probook 4440s Laptop.My laptop working fine, But Caps lock light is not glowing. I cant understand the if caps lock its on or off.Kindly please provide the solution for this problem\                                                                               Thanking you ,                                                                                                                                               With regards,                                                                                              &n... Read more

More replies
Relevance 36.9%

The caps lock and num lock notifaction wont turn off i have tried many things and it wont work Solutions tried:Going to preference, there is no "On-Screen Display Tab"Going to run the regedit.If the system does not have CAPS OSD under Control Panel / Uninstall a Program to uninstallYou will need to Uninstall the Lenovo Energy managemenr Under the Programs / Uninstall a program.

More replies
Relevance 36.9%

I need help. I will explain when I believe the problem began. I Had windows xp running with 3 harddrives and a Cdrom drive. My CdRom drive began to give me problems, so I was going to swap it with one from one of my other computers. At the same time I wanted to change the way I had all my drives connected. I had originally had the 80 gig drive as a Primary Master, with a smaller drive acting as the Slave. I also had the Cdrom as Master Secondary drive and a smaller drive attached as the Slave. Now everthing was running fine, exept that my cdrom drive would read the discs only if it would start up with the disk in the drive. If I tried to change it, windows would ask me to place a disk in the F: drive, when there already was one. I thought to replace the CdRom drive with another working device. while at the same time I decided to change up my Connections. I took the "new" cd rom drive and made it Slave Primary to the Master 80 Gig drive. then I took the two smaller drives and put them together as sencondary devices. when I tried to turn on the computer all that happens is, as soon as I touch the power my 3 lights on my keyboard come on. Num Lock Caps Lock and Scroll Lock. I know the drive is turning on because I can feel & here it wirr. I tried taking everything off except for the 80 gig drive and I still got the same problem. Later on I noticed that there are a bunch of smaller connections that come from the front of my computer power, sleep, and reset buttons. ... Read more

Answer:NumLock Caps Lock & Scroll Lock all lit up!!??

8 more replies