Computer Support Forum

Application Auto Launch not working in Intel Connection Settings

Question: Application Auto Launch not working in Intel Connection Settings

Application Auto Launch in Intel Connection Settings (which I use to launch a browser window for Wi-Fi authentication) used to work on my X220, but has stopped working (not sure how long ago) -- nothing seems to happen when a make a Wi-Fi connection with this setting with no error message or log. I've tried uninstalling the Sep 2011 software and installing the Apr 2011 software, but that didn't solve the problem. I'm not using Access Connections because (a) I prefer to have a minimum of software installed on my system and (b) the Intel software gives me everything I need (or at least it used to). Anyone have a clue on this issue? Lenovo?





Hope that helps,JohnThinkPad T420s [ i7-2640M | 16GB | 1TB SSD | 1600x900 | 802.11n | BT | Cam | FR | Win8.1Pro64 ]









Solved!

Go to Solution.

Relevance 100%
Preferred Solution: Application Auto Launch not working in Intel Connection Settings

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Application Auto Launch not working in Intel Connection Settings

Gave up waiting. Solved the problem by: 1. Downloading the latest PROSet/Wireless Software and drivers directly from Intel (link). 2. Uninstalling the Lenovo-provided Intel Wireless LAN (Wi-Fi) software. 3. Installing the downloaded Intel PROSet/Wireless Software and driversThank to Intel for making it possible for me to solve the problem apparently created by Lenovo.JNavas wrote:Application Auto Launch in Intel Connection Settings (which I use to launch a browser window for Wi-Fi authentication) used to work on my X220, but has stopped working (not sure how long ago) -- nothing seems to happen when a make a Wi-Fi connection with this setting with no error message or log. I've tried uninstalling the Sep 2011 software and installing the Apr 2011 software, but that didn't solve the problem. I'm not using Access Connections because (a) I prefer to have a minimum of software installed on my system and (b) the Intel software gives me everything I need (or at least it used to). Anyone have a clue on this issue? Lenovo?





Hope that helps,JohnThinkPad T420s [ i7-2640M | 16GB | 1TB SSD | 1600x900 | 802.11n | BT | Cam | FR | Win8.1Pro64 ]

4 more replies
Relevance 75.03%

Hello All,
I have a problem in windows 8 32 bit to auto lunch my application at boot up/start up.
Actually I already created registry in:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]

and

[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]

while I am also created registry in:

[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\Run]

but every it is failed to launch my application at windows start up, in 64 bit version it works well after creating registry in wow6432node.

Please help me.

Thanks

Answer:Auto launch an application at windows 8 32 bit startup

Why not just use the task scheduler?

3 more replies
Relevance 66.01%

Hello, my I'm Abel my Lenovo is G50-80, my OS is Ubuntu 17.10 I'm using Android Studio for development so I need to enable VT-X feature so I can run Android Virtual Devices.What happens is, I enable Intel Virtualization Technology in BIOS and save the changes then exit. I login into Ubuntu run this inside terminal "cat /proc/cpuinfo | grep vmx svm" which responds "grep: svm: No such file or directory". I go back to BIOS and the options is disabled. So the bottom line is, everytime I enable the option Intel Virtualization Technology, it's being disabled and I don't know why.

More replies
Relevance 66.01%

Hello, my I'm Abel my Lenovo is G50-80, my OS is Ubuntu 17.10
 
I'm using Android Studio for development so I need to enable VT-X feature so I can run Android Virtual Devices.
What happens is, I enable Intel Virtualization Technology in BIOS and save the changes then exit. I login into Ubuntu run this inside terminal "cat /proc/cpuinfo | grep vmx svm" which responds "grep: svm: No such file or directory".
 
I go back to BIOS and the options is disabled.
 
So the bottom line is, everytime I enable the option Intel Virtualization Technology, it's being disabled and I don't know why.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

More replies
Relevance 62.73%

Does anyone have used Intel connection settings in a wireless connection profile? Is it worth to use it?    One of the settings is to enable Cisco radio measurement. What's up with this setting? The reason I'm asking this because I'm looking for optimal settings for Intel 5350 adapter and Cisco E4200v2 router wireless connection on 5 and 2.4 Ghz bands. T400 running Vista 64bit  Thanks in advance  













Solved!

Go to Solution.

Answer:Intel connection settings

I tried to use the Intel connection settings but they were not in effect because Intel Proset Wi-FI connection utility wasn't installed. So I installed it  (latest and part of Wi-Fi driver ) from Lenovo drivers download page and I could able to use the settings. I don't see a way to run the Intel Proset Wi-Fi- connection utility as it's not listed in  the programs.  I think Lenovo has setup Access Connection to be able to use it at the background so Access Connection is only way to connect to the wireless network.   Does anyone have seen this?   Is it possible to use the Intel WI-FI connection instead of Access connection?  

4 more replies
Relevance 61.5%

All of a sudden my autoplay settings stoped working in vista...

When I used to plug in my flash drives or dvd, a little task menu used to pop up asking what program I would like to use....
Help : (

My settings are still the same...
 

Answer:My auto play settings are not working...

go to services and make sure shell hardware detection is running
 

2 more replies
Relevance 61.5%

I notice under my WiFi connection properties there is a tick box to use Intel Connection Settings and a Configure button. What are the advantages (if any) of using this and what are the recommended settings? I'm only sing 2.4GHz WiFi at present.

More replies
Relevance 61.5%

I notice under my WiFi connection properties there is a tick box to use Intel Connection Settings and a Configure button. What are the advantages (if any) of using this and what are the recommended settings? I'm only sing 2.4GHz WiFi at present.

Answer:WiFi - Should I enable Intel Connection Settings?

Nope. Just leave it unchecked.

1 more replies
Relevance 59.45%

Evening,

I recently purchased a new asus X751S for college and i looked for something that can also support some of my steam games. This laptop so far is perfect however there is one thing that I am not sure how to fix.

What I'm looking for is this

Spoiler

However on my graphics properties only gives me this

Spoiler

Now I've done the basic stuff as try to update my graphics driver https://communities.intel.com/thread/103311
However i get an error that says my manufacturer wont let me install latest version due to interfering with my current one.

I'm puzzled on what to do, if anyone can give me tips i'd gladly appreciate it!

Thank you.
 

Answer:Intel Graphics HD, no "Override Application Settings"

PC SPECS
 

1 more replies
Relevance 57.81%

I have tried using different USB cables, re-starting phone with and without cable connection. Still no recognition of the device by the computer, even though it does charge the battery. And with uploads, the statement on-screen is 'No uploads at the moment'. It uploaded about 7 photos and now does nothing with the rest....
I need some pictures from there for legal reasons - please help.

Answer:No USB connection AND auto-upload to OneDrive not working

The phone is Nokia 1020. The phone is up to date. WiFi is enabled.

more replies
Relevance 56.58%

http://www.gamepyre.com/reviewsd.html?aid=753&p=1

The X6800 outclasses the AMD CPUs by a wide margin in virtually every circumstance of performance measurement. The CPU also runs cool in comparison to earlier Intel CPUs and consumes less than 75W. By any standard of measurement the X6800 is an success bringing Intel back on top.

The E6700 which has a rather interesting naming scheme considering it’s only 266MHz slower than the x6800 while having the same cache and structure is right in there with the x6800 in performance, slower than its bigger brother but faster than the competition. For a suggested MSRP of $530, the E6700 is an easy choice for those wanting a fast system without wanting to shell out a grand.

And from Tom's Hardware:
http://www.tgdaily.com/2006/07/14/core_2_duo_benchmark_results/
 

More replies
Relevance 56.58%

I have searched everywhere. I tried a few things said in this forum and others but I am a newbie novice. I got my girlfriend's laptop connected to my wireless router with no problem. But no matter what I do her laptop will not connect to the LAN line. It just says "acquiring network address" over and over. I would tell you what I have tried already but I fear I would say it wrong. So if anyone can help, please! She is giving me another day to figure this out. The LAN was working last week before i fixed the wireless connection.

How can I get her LAN connected? What info do I need to provide?
 

Answer:LAN not working but Wireless is!! Intel(R) PRO/100 VE Network Connection

11 more replies
Relevance 55.76%

Intel? PRO/Wireless 2200BG Network Connection NOT WOrking!!
Keeps showing exclamation mark!!! Pls help me

My os is windows vista home premium 32bit
LAptop is IBM thinkpad X30

Answer:Intel® PRO/Wireless 2200BG Network Connection NOT Working

Hi,

Press the Windows key and R to open the Run dialogue.Type "devmgmt.msc" and press enter. Go past the UAC prompt if necessary.Make sure there are no errors showing, particularly in the networking section. Errors will be obvious, there is no need to hunt for them. Check Other Devices if this catagory exists.Under the Network Adaptors catagory, find the Wireless card and right click on it.Click on Properties.See if any errors are showing here and note down the error code and post here.Under the Driver Tab, click on Update Driver.Click on Search Online and let it finish. Install driver when asked.Note down and post here the model of you wireless network card and your full computer make and model.
If this does not fix the problem, download the drivers from here: Lenovo Support & downloads - Drivers and software - ThinkPad X30, X31, X32

Here is the direct link to the correct drivers for your card and OS. Restart your system after install and see if the problem is fixed: http://download.lenovo.com/ibmdl/pub...s/7kwv50ww.zip

Richard

3 more replies
Relevance 55.76%

I have a 2.5 year old Thinkpad T60 running Windows XP Pro with Service Pack 3.  Recently, I have not been able to enable/disable the Intel(R) Pro/Wireless 3945ABG Network Connection through the "normal" Open Network Connections enable/disable function. When I try, I get an error " It is not possible to disable the connection at this time. The connection may be using one or more protocols that do not support plug-n-play, or it may have been initiated by another user or system account"  The only way I can enable/disable the Wireless Connection is through the Windows Device Manager. I have already tried various combinations of driver updates, device removal/re-install and rebooting the computer to reset settings. I have also tried to reset my Windows start settings to their default values. Nothing works.  I suspect this issue is related to a Lenovo utility that interacts with the Wireless Network Connection, but not sure if which driver to update.  I back up my computer on a regular basis and run McAfee anti-virus. Any suggestions would be greatly appreciated.

More replies
Relevance 54.53%

My NIC stops working by showing a yellow "!".  I disabled it., uninstalled it, tried to update it, the problem remains the same.  Shutting down the computer and/or Reboot it will prompt the error message:  "PXE-E05: The LAN adapter's NVM configuration is corrupted". But, it will boot properly after without LAN network connection.When I tried to update it, it will stop by prompting: "Cannot install drivers. No Intel(R) Adapters are present in this computer".  In the BIOS, I reset it to the default, checked the boot order (the NIC is the last one in the list, which is normal).  I disable WOL. The problem persists.I don't know what to do now.  Since it said, while updating the driver, No Intel(R) Adapter is present.  In device manager, the adapter is still present with the yellow "!" .I restored my laptop to a previous Restore Point. Nothing! I would appreciate if someone could provide me with a solution! Thank you! Below is all the error messages when trying to install or update the driver:    

Answer:Intel(R) 82577LC Gigabit Network Connection stops working with a yellow "!"

Hi There, I'm sad there is no one to help me with my persistent, unsolved case with the NIC of my Laptop Lenovo X201 Tablet.  No one in this community to say even a word.  The Laptop is still working normally without the wired network connection. Someone from an Intel Forum suggest: " The eeprom on the NIC is corrupted, you can try reflashing the eeprom by checking with your laptop vendor for BIOS update."  I downloaded the lastest BIOS update from support.lenovo.com, to realize my BIOS is already up-to-date, because it's the same version than I'm trying to install.   Is there another way to reprogram the corrupted EEPROM on the NIC?  Please, help!

1 more replies
Relevance 53.71%

Recently I had a malware infection on my pc.I installed/ran malwarebytes in safe mode which fixed my immediate issue (recurring pup up windows/dialog boxes etc.)I believe that either by coincidence or via some new security settings, I cannot access my router settings (via pressing 192.168.2.1)I can surf the web with firefox and such with no problems, however google chrome wont pull up webpages (Error 102 (net::ERR_CONNECTION_REFUSED): Unknown error.)I also as stated before cannot access my wireless function of my network or my router settings in ANY browser.Also strangely my router has 4 hub ports and a 5th "modem" labeled ehternet port. When I plug my computer in directly to my modem internet works (on firefox) and also when I plug my modem into one of the 4 ports (not labeled modem) and then plug my computer's cable into another of the 4 ports.When I plug the modem into the "modem" port and then the computer into another port, my network has no internet access. HJT logfile is hereLogfile of Trend Micro HijackThis v2.0.4Scan saved at 1:43:04 PM, on 5/20/2010Platform: Windows 7 (WinNT 6.00.3504)MSIE: Internet Explorer v8.00 (8.00.7600.16385)Boot mode: NormalRunning processes:C:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Windows\system32\taskhost.exeC:\Windows\SOUNDMAN.EXEC:\Program Files\Hp\HP Software Update\hpwuschd2.exeC:\Program Files\Alwil Software\Avast5... Read more

Answer:Wireless connection/router settings/google chrome not working

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

5 more replies
Relevance 53.3%
Question: IE auto launch

I'm using XP sp2, IE 6.
Everytime after i startup my pc, the IE will auto launch a blank page.
Where can i check this problem and how to fix it? TQ.
 

More replies
Relevance 53.3%
Question: Auto Launch?

Not sure if I'm posting in the right category....when I first got my win8 computer everytime I put in a usb flash or started a dvd/cd I would get the auto launch box asking what I wanted program I wanted to use to open the files, etc. I would also get a little box up in the top right asking me to tap here to determine how to open. I'm not getting that anymore and it's driving me nuts, I have to take the extra steps to go into explorer and open stuff that way. Is there a setting somewhere that I can make that start happening again?

Answer:Auto Launch?

Perform an sfc/scannow

SFC /SCANNOW Command - Run in Windows 8

Post back the results.

6 more replies
Relevance 53.3%

Hi I mostly use Firefox or Chrome on this laptop. However I am getting a lot of auto launching of ads in IE9. I have ran several scan to fix the issues but nothing has worked. I have followed the instructions on the malware read me first thread. Attached are the logs

Please Let me know if you need any additional information
 

Answer:Ads Auto Launch in IE 9 even when not using IE

Can you rescan with RogueKiller (don't fix anything) and attach the log please.
 

9 more replies
Relevance 53.3%
Question: Auto Launch

HI;

When I place a disc for a new game in my CD player, it used to startup the drive and the interface for starting the installation would appear on the desktop.

For some reason, this is no longer happening. When the disc is placed in the drive, you can hear the drive startup and the lights indicate action. But there is no interface showing on the desktop. I can go to the drive on the register display and start it from there, or by using the "Run" command, but why isn't it showing on the desktop as it used to?

As well, when I placed other discs in the drive, I used to get a menu display that asked what I wanted to do. eg. play music, see pictures, etc. I no longer get that menu on my desktop.

I'm using XP Pro, tons of RAM, etc. No problem there.

Any suggestions?

ve6tp
 

Answer:Auto Launch

6 more replies
Relevance 52.89%

Hi
I have a new HP pavilion g series laptop with an amd dual core processor and DVD +/-R and RW drive. I want to load a navigation package (sea clear)which runs a derecryption application as the charts are accessed from the dvd. However when i run the application DVD-R Launch, I get the following message "Cannot find any protected DVD-R disc".
Any help would be greately appreciated. Thank you.
Regards
James

More replies
Relevance 52.89%

I have recently encountered two applications on two diff systems
that refuse to load.

If I double click on the application the process manager shows the process starts, but
it has zero cpu cycles zero ram and shortly afterwards the process clsoes.

In short the application will not start up?

On one computer, I don't recall the application, but it is a legitamte application.

On the other it is IMESH. It's been reinstalled 5 times but it continues this wierd behaviour.
Anti-spyware is disabled, it still won't load.... I don't get it.

Any ideas?

This is the first time I am seeing this kind of behaviour....

thanks!

p.s
I don't condone Imesh.
This is someone elses computer... it's none of my business.
 

Answer:Application won't launch

7 more replies
Relevance 52.89%
Relevance 52.89%

I just purchased and installed Spyware Doctor. After running it the first time there were 3 issues it could not clean. Two of the three were Rootkit.agent and Trojan.vundo. Upon reboot (and every boot since), windows starts up, asks for my logon, applies my personal settings and them immediately goes to saving my settings. The system them returns to the log-on screen. The same events happen in safe mode. I can boot and get into Windows using a WINTERMINAL disk in my CD drive, but i really don't know what do to from this point. When I try to double-click or run Spyware Doctor, it says there are files missing. Please help!
 

Answer:Windows logs me on, applies settings, then auto saves settings

Welcome to Major Geeks!

First I recommend that you not attempt to run Spyware Doctor anymore since it seems to have been what cause you this problem with logging in. This is about the 3rd time in the last couple days someone has mentioned this issue and each time it was after running Spyware Doctor. To that end, I would ask do you have a log from Spyware Doctor. It may default to saving a log somewhere. I believe they used to save files in as XML (which is not a good idea in my opinion).
Please try to follow the instructions in the below link and attach the requested logs when you finish these instructions.

READ & RUN ME FIRST. Malware Removal Guide
 

3 more replies
Relevance 52.89%

Hi Guys,Have just upgraded from Nero 6 to 8. Now, with Nero 6 when I put a blank disc in for copying data or music files Nero auto launched and asked what did I want to do, and gave the various options. Nero 8 does not do this, at least not for me? Any ideas why this is? Thanks in advance.

Answer:Nero 8 No Auto Launch

Try making Nero the default app from your start menu/default programs.

6 more replies
Relevance 52.89%

It's the craziest thing! My work PC will be fine for a few hours, but come early afternoon it's almost like it gets tired and decides not to auto launch programs anymore.

What I mean is - if I receive an email with a hyperlink, I click the link and it does nothing. If the email has an attachment, I click to open the attachment and nothing happens. If I navigate to a file in Windows Explorer then double click the file - it won't open. If I try to download and open a file from the internet - it just hangs there doing nothing.

However, if I copy the hyperlink, launch my internet browser and paste the link into the address bar I'm good. If I save the attachment to a location, launch the associated program and navigate to open it, I'm golden. Downloading from the internet is a little more difficult because more often than not I don't get the option to "save it down" first.

To add to the quandry - say, oh about 10-15-30 minutes later sometimes... Surprise! The link I tried to follow suddenly pops open. The Excel, PowerPoint, pdf attachment pops up out of the blue. Of course this only happens sometimes. More often than not they just never open.

So the problem is non-discriminating. It's not just hyperlinks or attachments from Outlook. It doesn't only happen with Excel files. It's not just from one website or browser. It happens across the board. And it doesn't happen every day - but it happens enough to interfere with ... Read more

Answer:Can't Auto Launch Any Programs

Is anything scheduled to run during these 'afternoons' such as network virus scan. Something like symantec uses the RTVSCAN.EXE process that consistently runs then a set periods has been known to halt a PC from most things for 5-10 minutes (sometimes longer).

Check you task scheduler to see if there is anything set in there, also try loading task manager when it works and again when it doesn't an compare what's running that may cause the issue.
 

2 more replies
Relevance 52.89%

Hi guys,

Every time I connect my camera to the USB, the Photo App automatically launches and it is driving me nuts. I wouldn't mind using the Photo App but it doesn't give me any option to delete the photos once transferred. I am aware I can right click the device in My PC and Import that way, (like the Windows 7 of old), but the App still opens forcing me to close the screen! I've clicked on the Default setting for Photos and chose Do nothing but the photo App still automatically launches!!! What can I do? I just want the Windows 7 method of importing.

Answer:Photo app auto launch

Hello Tamplar,

This sounds like it could be AutoPlay. If so, you can change what action you want while the camera is connected.

AutoPlay - Turn On or Off in Windows 8

4 more replies
Relevance 52.89%

Can I do the above from startup because thats usually the only reason I switch my pc on. Lazy I know.

Answer:auto launch firefox

Yes, just drag the icon into your Startup folder.

4 more replies
Relevance 52.89%

My CD drive will not automaticly launch executable CDs or DVDs anymore. It used to. Is there something I can check to see why not?

Answer:CD drive will not auto launch

Hi again...

you can try right clicking on the DVD drive icon in My Computer and then selecting Properties then AutoPlay and change the settings there :)

2 more replies
Relevance 52.48%

This has been bugging me for a while it pops up whenever I start the computer. I don't know to much about how to do things so please have some patients with me. If you can help me than I might just love you forever.

Answer:Error loading C:\Documents and Settings\ Network Service\ Local Settings\ Application Data\ hrcopul.dll

Have you run any scans for infections? I Googled hrcopul.dll, and everything that I found points to a infection.

7 more replies
Relevance 52.48%

Hello,
I was wondering if there is any free software out there that I could use to monitor what applications are being used on my Computer. Like if Solitaire was launched, it would log that unlike Windows would. This is W2K box. Any help is greatly appreciated.

Thank You
Scott
 

More replies
Relevance 52.48%

I have an installation that I built with InstallShield that launches an executable which requires some resource files as well as another program running in the background(MATLAB Component Runtime). When I install this on my Vista 64 machine and then launch the application it just hangs for 5 to 10 minutes. What I mean is that the application begins to launch, as I can see in the Task Manager, but then hangs around 14k. If I just let it keep running eventually 5 or 10 minutes later it will completely launch the app and its interface will pop-up and be active and run normally. If I call the executable(not installed) the program launches fine and everything works fine. Also, if I install the app on my desktop, i.e. not in ProgramFilesFolder, it runs without the delay. The only workaround I could find was to navigate to the installed .exe file and change its Privilege Level to "run program as an adminstrator". I've tried inserting manifests with different execution levels, but that didn't work. Anyone have any clues?

More replies
Relevance 52.48%

DONT TELL ME TO GOOGLE IT, I HAVE BEEN without success.http:[email protected]/3183137033/How do i get rid of this? any program i code in .net has this "splash" screen before initialization... and it's wasting my precious time. lol. Plus it's ugly... I know it is possible to remove, because the coder of a game i play, he uses VCpp.NET and there is no splash... so... yeah.How do i remove it?thanks in advance,Arti

Answer:.NET Application launch question?

Quote from: liambiscuit on January 09, 2009, 08:02:38 PMDONT TELL ME TO GOOGLE IT, I HAVE BEEN without success.first hit with this search.Visual Studio .NET "verifying application requirements"yielded this:http://www.technewsgroups.net/group/microsoft.public.dotnet.general/topic38919.aspxQuoteYou need to disable the automatic update check.Project Tab >> Updates button >> Uncheck "This application should check for updates".---Posted via DotNetSlackers.comHope this helps!

1 more replies
Relevance 52.48%

My friend uses Sopcast to watch sporting events. The way it should work is you click a link in your browser that looks like this: sop://broker.sopcast.com:3912/12345 and the right channel should open up in the Sopcast software.
They use Windows 7 and IE 9, but it only works right for them from the administrator's account.
From a normal user's account clicking the link in IE 9 would open up the link in a new tab (as normal) and launch the Sopcast software, but would not tune it to the right channel.
Under the administrator's account it did initially require 2 or 3 permissions, but as the regular user it doesn't even ask.
I tried changing the regular user account to an administrator and reinstalling the software by the new admin, but it still did not work and did not even pop the permissions.
Only lowering the UAC all the way to 0 made it work, but upping it again even one notch disabled things again. It never asked for any permissions, like it did under the other account.

I searched and found others with somewhat similar issues, but no direct solution.
I guess Windows 7 blocks it for the regular user, but how can I authorize it? Make it ask me?
Should it have been working or is it something generally blocked, on purpose?

Thanks in advance for any help or comments!

Answer:Can't launch link in application

Ideas anyone?

1 more replies
Relevance 52.48%

I've been experiencing a few problems lately:When I open FireFox the main page goes to file:///C:/Program Files/Mozilla FireFox/ instead of my normal homepage. A similar thing happens when I open IE instead it takes me to http:////
When I go to Run and type 'regedit' I get a dialog box making sure I want to add information to the registry. If I click ok I get an error stating it couldn't open up the file. All I'm trying to do is open regedit.
When I open Visual Studio I get an error saying 'The following files were specified on the command line' and it is blank. I've looked at the shortcut and there is nothing after the exe.

If you need any additional information please feel free to contact me and I will get back to you quickly.

Thanks.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 7:09:43 PM, on 11/18/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Java\jre1.6.0_07\bin\jusched.exe
C:\Program Files\Logitech\G-series Software\LGDCore.exe
C:\Program Files\Logitech\G-series Software\LCDMon.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Logitech\G-series Software\Applets\LCDCountdow... Read more

More replies
Relevance 52.48%

When I launch an application, blender, I get a big error message, assessing that the configuration isn't right.

Attached is a snapshot of the problem.

Any help/ideas?!

Many thanks!

= )

Answer:Problem When I launch an Application.

English please?

translate the error

2 more replies
Relevance 52.48%

I have some applications that I like to run at specific priorities. For example i like running my voice recognition at higher than normal and background 3d renders at low. Is there a way to set this for each application at launch time so that I don't have to do it manually each time throught the task manager?
 

Answer:Possible to set application priority at launch?

Yes it is -
Create a text file in the directory where the the program (Programx.exe) lives, call it Programx.bat, Where Programx.exe is the actual name of your program. The file has one line of text in it - cmd/c start /High programx.exe.
Create a shortcut to Programx.bat and use that instead of a shortcut to the program itself.
Instead of high you can also use "Low", BelowNormal, AboveNormal or Realtime.
Realtime should only be used if you have a high spec machine with at least 512Mb of RAM.
 

2 more replies
Relevance 52.48%

Hello guys im using windows 7 , ive installed far cry 3 and cabella big game hunter , i launched those game it say ( the applicatio. Was unable to start correctly 0xc000007b click ok to close the application )
I just google this to get a solution for this but nothing works. frame work - vc redist etc i installed all of them but nothing whats should i do.please help , i tried everything ( btw i installed aio- runtime ) still nothing , i need your help and thank you
 

More replies
Relevance 52.48%

Using Win XP SP1, older apps from the Win95/3.1 era have run
perfectly for years. Now when I start an old app (card game,
screen saver, etc.) I get this message: "Application Error,
access violation in KSPSOL.EXE at 0x00000009." (same for other
old execute files). Did an install change a driver, dll, etc.?
I love this old softare and hate to lose these old friends. I
tried XP's "make compatible" feature with no luck.
 

Answer:application launch error

In "Compatibility Mode" there is another Area below where you can also change "Display Settings" have you tied this.

You may have to Run some Win.95 Stuff in 256 Colours

SP2 would not hurt either

Just a thought
 

1 more replies
Relevance 52.48%

I have a one-year-old VAIO desktop w/ XP Home (PCV-RZ22G). It was bought refurbished and had some problems that got me a new mainboard, floppy drive, TV tuner card, power supply and a few other misc. parts. It has run decently since repairs, but now refusues to open some applications. I click on them and sometimes they open after an unbelieveable delay or sometimes they dont open at all. Microsoft Works and Click to DVD are the main problems today, but there have been other programs that have given problems at other times. The stupid McAfee (MCAFFE IS HORRIBLY UNSTABLE AND OPERATES ERRATICALLY) is disabled so I hope it's not that. Why do applications sometimes refuse to launch please?
 

Answer:Application wont launch

Hiya

Lets see what you have running:

Go to Run and type MSINFO32
On the left choose Software Enviroment, then Startup Programs. Copy/paste the list here.

Regards

eddie
 

1 more replies
Relevance 52.48%

i just installed a program for viewing statsme on my G15 Keyboard (the one with the LCD screen) butn when i try to lauch the new application i get the error
Code:
The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
i take it this is a common error seeing as ive had it happen to me a couple times before? is there a common cure?
 

Answer:application failing to launch

bump from page 2
 

1 more replies
Relevance 52.07%

Silly question but every time i plug my wireless broadband in the software auto launches. what would be the simplest way to prevent this? as i am running windows developer preview and it auto connects without the use of the wireless software

p.s this isn't a question relating to programs that launch automatically at windows start-up

Cheers Guys/Gals

Answer:How to stop software auto launch

Is there a option in the software to turn it off?
Check to see if it set to "connect automatically when this network is in range" look at Option one step 1 thur 4 it will show you how to get there. Wireless Network Profile - Backup and Restore
Jerry

5 more replies
Relevance 52.07%

Ads Auto Launch in I.E. 9 on just one of the user accounts on this computer. I.E. 9 does not have to be opened for the ads tolaunch.  I have taken the following steps:
 
 Ran Spybot Search & Destroy scan
 Ran Hitman Pro
 Ran Malwarebytes Anti Mal-Ware Scan
 Ran MS Security Essentials
 
The scans find threats and clean but the issues remain.
 
 
Running WIndows 7 Home Edition
Also Admin account is not having this issue.
 
How can I get the ads for auto launching and make the computer safe.
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 9.0.8112.16447  BrowserJavaVersion: 10.17.2
Run by Isabel at 10:49:14 on 2013-09-22
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.4029.1998 [GMT -7:00]
.
AV: Microsoft Security Essentials *Enabled/Updated* {9765EA51-0D3C-7DFB-6091-10E4E1F341F6}
SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Microsoft Security Essentials *Enabled/Updated* {2C040BB5-2B06-7275-5A21-2B969A740B4B}
.
============== Running Processes ===============
.
C:\windows\system32\lsm.exe
C:\windows\system32\svchost.exe -k DcomLaunch
C:\windows\system32\svchost.exe -k RPCSS
C:\Program Files\Microsoft Security Client\MsMpEng.exe
C:\windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\windows\system32\svchost.exe -k netsvcs
C:\windows\system32\svchost.exe -k LocalService
... Read more

Answer:I.E. 9 Ads auto launch on User Account

Good evening.
Is this the log from the User account with the issue?

4 more replies
Relevance 52.07%

This seems to have happened since I installed/uninstalled Real Player.
All the settings as far as Autoplay etc are correct ?
 

Answer:(Solved) CD player won't auto launch?

11 more replies
Relevance 52.07%

Hi there :)I was hoping someone could help me with something that is probably quite simple.Basically, I am producing a DVD which contains videos and images. The DVD is only intended to work on PC's. I will also be making a HTML page which will give the user an interface to be able to select the image or video that they want to view.So, how can I get the user interface (internet browser) to launch automatically when the DVD is inserted? Do I burn the DVD as a data DVD? Also, it would be much better if the browser opened without any menu or status bars, just a plain window. How would I do that?I would greatly appreciate some help.Many thanks :)

Answer:Need browser to launch auto when inserting my DVD

Its just an autorun.iniForgot the code so you could just instead use this program: click here

3 more replies
Relevance 52.07%

Help Please!I am running Windows XP Pro and am trying to disable the Auto Launch/Play function but appear unable to. If you do try disable by going into the options for the CD Rom drive, it still asks which program you would like to use each time you enter any CD?I want to turn it off!!

Answer:Windows XP and Auto Launch/Play

hmmm you can disable autoplay if you hold the shift key for a few seconds while inserting the cd but not too sure how to do it permanently

5 more replies
Relevance 51.66%

hai,
In my PC, previous version of the product is installed.Now i am installing the updated version .During this setup it asks enduser to unistall the previous version using AskYesNo dialog box..If enduser selects Yes how can I launch the Maintainence Dialog box of the Previous version in this script code...Can you please help me...
 

More replies
Relevance 51.66%

I would like to launch my MP3 application automatically when I plug in my MP3 player to the USB port. Is there a way to set this up?

Thanks
Ed Brimberg
 

Answer:Launch Application When USB Device is Plugged In

6 more replies
Relevance 51.66%

I am trying to install Solid Edge ST onto my computer via a DVD. When I put the DVD in, most of the time windows stops responding, but sometimes I get through. When I try to autorun the program, so I can install it, I get the error message E:\ Launch.exe is not a valid win32 application.

I am also not the first person to use this disk. Two people before me have installed it without problem

What do I need to do so I can install this program?

Answer:E:\ Launch.exe is not a valid win32 application

Sounds like the autorun is not working.
Right click on the dvd icon and choose explore.
Navigate to the install program and double click on it.

1 more replies
Relevance 51.66%

Hello,
I am having this issue with DPC Watchdog Violation each and every time I load Minecraft.
The application attempts to load, but then the machine locks up, mouse freezes, sound freezes etc.

After a few minutes, I get BSOD'd and receive the DPC_Watchdog_Violation error. The computer then finishes the dump, but sits on a blank screen. It does not reboot without manual intervention.

This is my setup and what I have done so far to troubleshoot
I am running an XFX Radeon HD 6950, with 3 monitors, using Eyefinity (Similar to spanning across all 3)
I have tried it with and without eyefinity enabled. This does not appear to be the issue. For the purposes of the dump, eyefinity was disabled.

I have updated the drivers on my Corsair Force XT SSD to the latest firmware update (5.xx)
I have updated the drivers on my XFX Radeon HD 6950 with drivers directly from the AMD Website (XFX does not appear to supply drivers and/or I just cant find a drivers page on their site)
I have Updated to the latest Java x64 Build. (Minecraft is a Java Application)
Other Applications/Games do not appear to cause BSODs, but I'm guessing that is only because they are calling different functions.

Attached Below is my W7Forums Dump. I assume that this works for W8 as well as I was directed to the utility from the W8Forums Sticky. Thanks for looking

Answer:DPC Watchdog Violation on Application Launch

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
- Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a proble... Read more

9 more replies
Relevance 51.66%

i use windows xp sp2...of late wen i try to launch any application which needs a lot of memory my pc reboots on its own...i hav 512mb of ram... i tried to install fifa2006 and the same thing happened... and also wen it try to launch POP warrior within... but GTA san andreas works fine... pls help...
 

Answer:computer reboots on application launch

I would say, start by using a program like memtest86
http://www.memtest86.com/

Could very easily be RAM
 

2 more replies
Relevance 51.66%

Forgive, but I am pretty new to using win7 (about a week or two), but do possess good general knowledge. Last night, I tried to launch an application (World of Warcraft Launcher). Nothing happened, no error message at all. Was trying from it's Task Bar icon, tried it from a desktop shortcut, even navigated to it in Explorer and tried directly launching it. Double click and nothing happens. I could launch the game itself, so was able to participate in my Guild's raid (which seems to indicate Windows was working). Asked there and was told look in the event log.

Ha, it seems that several utility type applications that I can't really find I CAN find via the Help system and launch them from there, but that's another issue. Anyway, scour as I could in the Event Viewer, I simply could NOT find any kind of entry pertaining to what I was trying to do, launch an application (btw, this application worked just fine earlier in the day).

So today, just out of habit, I tried to launch it and low and behold, it now does launch.

Can anyone shed any light on why and how this can happen?

Answer:Application Doesn't Launch/Event Log

Hi Riverside,
I'd be wary of where you got W7 Ultimate,(1/2 weeks usage!!!) its the most pirated OS.
Now if its a pirated copy, its Likely that the media was corrupt in some way, could possibly be the cause.
To check copy/paste the results of this tool
http://go.microsoft.com/fwlink/?LinkID=52012

Roy

3 more replies
Relevance 51.66%

My machine is a 5 year old Dell Dimension 8300 running Windows XP Home Edition, Service Pack 3. When I turn the computer on I get this message: C:\Program Files\Dell Support Center\gs_agent\dsc.exe

Unable to launch applicatioon. Please restart and try again. Error code: 2147023174

When I restart, I get the same message.

Outlook Express and Firefox will not run, but I can use Word. When I open a Word document, I get the message This document could not be registered. It will not be possible to create links from other documents to this document.
 

Answer:Solved: Unable to launch application

16 more replies
Relevance 51.66%

Excuse me Please:

While the title might seem painfully obvious, and in winXP sounds actually did play when an applications were launched.

However, in win7proSP1, it has been noted that regardless of which .wav file is listed in Control Panel/Sound/Sounds tab under Open Program, this OS does NOT play said .wav file.

I have attempted to do searches via Google and here and have only found a reference of the use of a batch file and sndrec32.exe from Windows XP.

It seems sad (but not unsurprising when one considers a certain corporation being averse to accountability) that one has to rebuild functionality.

Is there a way in which one can have x .wav played, either generically when *ANY* executable is manually or automatically launched, or more preferrably, assign x .wav files to y executables?

Thank you kindly for the assistance in this small, but distinct problem.

More replies
Relevance 51.66%

Hello, i use CPU Throttle while gaming/encoding, and i'd like it be launched automatically after i launch a bunch of specific .exe ; how can i set that? Hope someone will help. Thanks.

Answer:Task : Launch X after application after Y launched

bump?

9 more replies
Relevance 51.66%

When I use a hotkey I've assigned to launch an application (e.g., Ctrl-Alt-E to launch Internet Explorer), it sometimes takes 5 - 40 seconds for that app. to launch. Why is this? Hotkeys are for making program loading FASTER, not slower! Sheesh. When I click on an icon to launch the program, it loads instantly.

I'm pretty sure there is a delay parameter for hotkeys somewhere down in the registry but after scouring the net, I still can't find it.

My system: Windows 2000, 2 GHz Athlon, 512 MB RAM.

Any help is greatly appreciated!

......Sean
 

More replies
Relevance 51.66%

Hi

I need help - I have been trying to download an application for over a week

I am running windows XP and was told to launch using Internet Explorer

This is the error message I received:

Cache must be enabled for nativelib or installer-desc support

When I clicked on details this is what I got


<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.0+" codebase="http://webstorage02.five9.com/8.0/start/lib/../../integrations/" href="http://us3.five9.com/integrations/salesforceAgentApp.jnlp?user=MLowd%40expertplanet.com&crm=sf" version="8.0.14">
<information>
<title>Five9 Adapter for Salesforce</title>
<vendor>Five9</vendor>
<homepage href="http://www.five9.com/"/>
<description>Add-in libraries to interact with Salesforce web application</description>
<description kind="short">Five9 Adapter for Salesforce</description>
<icon href="images/five9/sforceBridge.gif"/>
<shortcut/>
</information>
<security>
<all-permissions/>
</security>
<update check="always" policy="always"/>
<resources>
<j2se version="1.6+" initial-heap-size="64M" max-heap-size="228M"/>
<j2se version="1.6.0+" java-vm-args="-Xmx228M -Xincgc"/>
<jar href=&quo... Read more

More replies
Relevance 51.66%

I have been experiencing a delay when attempting to launch ANY application. When I attempt to run a program from the quick-launch, start menu or desktop shortcut, there is a delay of 5-15 seconds before the hard disk even starts spinning up. Once the hard drive light begins flashing, the application loads very quickly.

I have run SpyDoctor (pctools) and TrendMicro and both have given me a clean bill of health. I have attempted several of the solutions to similar problems posted here in your forums but nothing seems to make a difference.

This is occuring on my desktop AND my laptop. The odd thing is that my wife shares the laptop and her user account operates perfectly fine—the same physical machine but a different user.

I have compared all the services/processes and we both seem to be running the same things.

I am completely stumped and can't seem to find ANYTHING on the web that begins to shed any light. Here is my HIjack log from my laptop (where I'm currently sitting):

Logfile of HijackThis v1.99.1
Scan saved at 6:18:18 PM, on 10/22/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.e... Read more

Answer:5-15 second delay when launch ANY WinXP application

6 more replies
Relevance 51.66%

Excuse me Please:While the title might seem painfully obvious, and in winXP sounds actually did play when an applications were launched.However, in win7proSP1, it has been noted that regardless of which .wav file is listed in Control Panel/Sound/Sounds tab under Open Program, this OS does NOT play said .wav file.I have attempted to do searches via Google and here and have only found a reference of the use of a batch file and sndrec32.exe from Windows XP.It seems sad (but not unsurprising when one considers a certain corporation being averse to accountability) that one has to rebuild functionality.Is there a way in which one can have x .wav played, either generically when *ANY* executable is manually or automatically launched, or more preferably, assign x .wav files to y executables?Thank you kindly for the assistance in this small, but distinct problem.

Answer:Play Sound(s) on Application(s) Launch

I cannot reproduce your issue. Launching applications will play the sound specified in "Open Program" on Windows 7 for me.

5 more replies
Relevance 51.66%

Excuse me Please:While the title might seem painfully obvious, and in winXP sounds actually did play when an applications were launched.However, in win7proSP1, it has been noted that regardless of which .wav file is listed in Control Panel/Sound/Sounds tab under Open Program, this OS does NOT play said .wav file.I have attempted to do searches via Google and here and have only found a reference of the use of a batch file and sndrec32.exe from Windows XP.It seems sad (but not unsurprising when one considers a certain corporation being averse to accountability) that one has to rebuild functionality.Is there a way in which one can have x .wav played, either generically when *ANY* executable is manually or automatically launched, or more preferably, assign x .wav files to y executables?Thank you kindly for the assistance in this small, but distinct problem.

More replies
Relevance 51.66%

In internet explorer I want to auto launch ica file, but only getting option to open or save. What do I do?

More replies
Relevance 51.66%

Hey,

I'm new to this forum and you seem like a good bunch of guys. I'm having a problem and was wondering if anyone could possibly help.

I'm running Windows XP Pro and the problem is when I choose to view the quick launch toolbar and auto hide the tool bar it works fine. But when I log off and then back on again the tool bar and start menu are back to normal. What I mean is it does not retain the quick launch toolbar or auto hide, I have to choose them again. Now I can log on under a different user and it will retain the changes, which is very strange.

Maybe I'm missing something very strange?

Any help would be great.

Answer:Quick Launch Tool Bar & Auto Hide

Do you have SP1 installed.
Also what kind of account is this that is experiencing the situation?

3 more replies
Relevance 51.66%

My internet (IE6) works okay, in that I can navigate to any webpage, however any links on the pages that open in a new browser are blank with no address info?
 

Answer:(Solved) blank auto launch IE6 windows

Have a read of

M$KB 281679 You Cannot Open New Internet Explorer Window or Nothing Happens After You Click a Link
 

3 more replies
Relevance 51.66%

Hello, I have tried to clean this up and fix the issue, unsuccessfully. A friend dropped off her pc, because IE and Fire fox close almost immediately after opening. I have run a host of clean up utilities, AVG, Ad Aware, and everything from the Trend Micro homepage. System looks clean, but still having same issue. One site suggested removing Yahoo, so I did, to no effect. Below is the log file from HJT. Any help will be greatly appreciated.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2:53:30 PM, on 4/6/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16608)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\system32\wuauclt.exe
C:\HJTS AntiVirus\HiJackThis.exe
C:\PROGRA~1\Grisoft\AVG7\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVG7\avgupsvc.exe
C:\Program Files\Grisoft\AVG7\avgcc.exe
C:\Program Files\Grisoft\AVG7\avgwb.dat
C:\WINDOWS\system32\wbem\wmiprvse.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page... Read more

Answer:IE and Firefox auto close, can not launch inetcpl.cpl

Download Combofix from any of the links below, and save it to your desktop. For information regarding this download, please visit this webpage: http://www.bleepingcomputer.com/comb...o-use-combofix

Link 1
Link 2
Link 3

**Note: It is important that it is saved directly to your desktop**

--------------------------------------------------------------------

1. Close any open browsers.

2. Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.

--------------------------------------------------------------------

Double click on combofix.exe & follow the prompts.When finished, it will produce a report for you.
Please post the C:\ComboFix.txt along with a new HijackThis log for further review.
Note:
Do not mouseclick combofix's window while it's running. That may cause it to stall

1 more replies
Relevance 51.25%

Hi,
All of you must be knowing that Intel successfully tested its new 80 cores processor in Dec last year or jan. this year. Its clock speed is 1.7 THz and it consumes 65W (Only). And its exactly same in size as that of a simple 65nm processor. So, intel is going to launch it for home as well as corporate users.
Thus,
Does anyone here know when intel is going to launch that processor for home users?
thehacker
 

Answer:Does anyone know when Intel is going to launch its new processor?

Is this it?

http://www.intel.com/pressroom/archive/releases/20070813comp.htm

or this:

http://www.intel.com/pressroom/archive/releases/20070821comp.htm
 

8 more replies
Relevance 51.25%

ok i may be opposite to many, but i hate when web content plays in the browser. i want it to launch the external application and play it there. how do i set this up.

so if there is a link to a wmv file it will actually open media player and leave me on the same page i was browsing.

running windows vista home premium, firefox 2.0.0.7 and window media player 11
 

Answer:Solved: making web content launch application

got rid of quicktime and problem solved
 

1 more replies
Relevance 51.25%

This problem is related to sound volume, but I think the problem is not related to the sound system, but more the way Windows recognizes applications when they are launched. So here's the problem.....

I use Teamspeak a lot when I game. To be able to adjust the volume of Teamspeak relative to the game (so I can hear both properly), I have my PC volume set the 80% and I set everything else to about 15% most of the time. If I need to tweak an individual applications volume, I can open the standard Win7 volume mixer and tweak the volume for that application. Generally, that works great. I set the volume once and it stays at that volume until I change it.

However, there are some programs where every time I launch them, they have their volume set to 80%. An example of this is the program Voice Attack. I have Voice Attack do TTS or play sounds when I run certain commands. For example, if I say, "What time is it?", Voice Attack will say, "It is xx o'clock". I have Voice Attack set up to run on startup, so every time I reboot, when I use a voice command that has audio feedback, it is damn loud because the volume is set to 80%.

I downloaded a 3rd part tool for managing volume called PowerMixer. It did not help me with my problem, but it did show me what I suspected: Every time Voice Attack runs, the mixer (both the stock Win7 mixer and PowerMixer) recognize it as a brand new application. They think this is the first time I've ever run that application... Read more

More replies
Relevance 51.25%

Hi there,
I need to write a code that would trigger the start-up of my VB
application at specific time (e.g. every one hour).

Also I need to know how I can launch the same application once the pc starts. Your help is very much appreciated.

Ishak
 

Answer:How to launch VB application at a PC starts/scheduled time

If you search for Scheduled time there are a couple of posts on how to do it.
 

1 more replies
Relevance 51.25%

Hi, so lately i've found that when launching a application windows defender does a full scan of all its files etc, not sure if this is exactly normal but when running apps with multiple files eg photoshop with presets fonts etc, it scans them all which not only makes it longer to actually start the application but the whole computer down, i have one 1TB 7200RPM disk that i am running and 16gb ram,

More replies
Relevance 51.25%

Does anyone know the command to do the following:
Launch an application once from within a batch script which will only be required to launch once and then close down.

Example: Would using schtasks be a decent option?

Have tried numerous methods but i don't want to specify a set time for this to be run.
Ideally it would
1. create the task
2. Run the task
3. Delete the task.

Cheers,
Al help appreciated
 

Answer:Using schtasks in batch file to launch application.

Why use schtasks for starting the application, and not just launch the application from the batch file ?
 

3 more replies
Relevance 51.25%

Recently my computer has started displaying the "svchost.exe Application Error" message. There is also another window that appears frequently that says "Generic Host Process for Win32 Services" and then "Generic Host Process for Win32 Service has encountered a problem and needs to close."

Usually after I close these messages, or have been using the computer for a little while (maybe 20-40 minutes, it depends), my computer starts freaking out. Everything starts running slow and freezes (and sometimes un-freezes a few minutes later), the toolbar at the bottom of the screen will freeze (so I cannot access the Start menu), and the taskbars at the top of windows (and usually the toolbar) will revert to a Windows 98 type look.

I don't know what to do to fix these problems, your help and advice will be much appreciated!!
 

Answer:Can't launch system applications. Several application errors.

First thing, you should alwasy state your OS and computer type (notebook or desktop) when requesting help. Also if possible the exact "svchost.exe Application Error" error as this it too generic.
That said:
Have you tried a restore point to a time when it was performing correctly?
You can also do a file run: SFC /Scannow to repair missing windows files. This will require you Windows CD unless you have a restore partition.
Since this is happening after the computer is running for a while, are you having overheating issues? Especially essential with notebooks.

Have you run an updated Virus Scan? Malware scan such as malwarebytes or Superantispy?

Run a checkdisk and a defrag?

More info please RebKit
 

9 more replies
Relevance 51.25%

Hi, so lately i've found that when launching a application windows defender does a full scan of all its files etc, not sure if this is exactly normal but when running apps with multiple files eg photoshop with presets fonts etc, it scans them all which not only makes it longer to actually start the application but the whole computer down, i have one 1TB 7200RPM disk that i am running and 16gb ram,

More replies
Relevance 51.25%

Hello my computer suddenly froze on me and I could not reboot, it would just freeze every time I tried. I let it sit for about 3 hours before I tried again and I came to a screen asking me two options one was to start from last woking settings which I clicked. It booted up, but then I got the "Application failed because conn.DLL was not found". I check a few places to fix this matter and it lead me here, I've seen one happy person receive good help to fix the same problem. So I took the liberty of getting two logs, hope this helps:

SUPERAntiSpyware Scan Log
http://www.superantispyware.com
Generated 09/10/2009 at 00:01 AM
Application Version : 4.28.1010
Core Rules Database Version : 4091
Trace Rules Database Version: 2031
Scan type : Complete Scan
Total Scan Time : 00:25:19
Memory items scanned : 418
Memory threats detected : 0
Registry items scanned : 4424
Registry threats detected : 0
File items scanned : 10205
File threats detected : 8
Adware.Tracking Cookie
C:\Documents and Settings\user\Cookies\[email protected][2].txt
C:\Documents and Settings\user\Cookies\[email protected][2].txt
C:\Documents and Settings\user\Cookies\[email protected][1].txt
D:\backup\48a7bf1f0ffdb147dc\HINDI\Cookies\[email protected][2].txt
D:\backup\48a7bf1f0ffdb147dc\HINDI\Cookies\[email protected][1].txt
D:\backup\48a7bf1f0ffdb147dc\HINDI\Cookies\[email protected][1].txt
D:\backup\48a7bf1f0ffdb147dc\HINDI\Cookies\[email protected][1].txt
D:\backup\... Read more

Answer:Launch application failed because conn.dll was not found

The two programs I have installed now hijackthis v2.0.2 and super anti spyware will that keep me protected aginst virus? Or do I have to download another program that is better? My computer loads really slow now, hope someone can help ASAP! Thanks!
 

2 more replies
Relevance 51.25%

When I start Outlook 2003, I receive the following error message:
Cannot start Microsoft Outlook. Unable to open the Outlook window. The set folders could not be opened. The server is not available. Contact your administrator if this condition persists.

I have uninstalled and reinstalled Outlook without success.

I have also been to Microsoft's web page which clearly identifies this error (http://support.microsoft.com/kb/822503/en-us?spid=2520&sid=global), however, the solution they have noted (i.e. Change Office User Settings page (page 10 of 24)) does not appear when reinstalling the program.

I am at a loss to know how to proceed and am looking for suggestions.
 

More replies
Relevance 51.25%

Hello,  This is a tough one.  Early stage of this infection would not allow any exe to launch, nor could I change a name and extension (to com) and get the application to launch.  I could not boot to safe mode, windows explorer tools "folder options" missing, policies changed that restricted windows installer from installing any new applications.  Then the popups, first the system32/cmd.exe, whata cluster *&%$ that was, command windows opening up 5 at-a-time.  Then once you got past that, and launched IE,  it redirects links to different sites,  If I managed to launch a search and used any of these tags; antivirus, antispyware, HJT, the system would reboot. If I open Control Panel I am unable to open "Add or Remove Programs" I receive this message error "system32/rundll32.exe" application not found.[attachment deleted by admin]

Answer:One Tough Virus Infection will not allow any application to launch

This looks like a Virut infection but we will have a closer look.Disable Spybot's TeaTimerWhile TeaTimer is an excellent tool for the prevention of spyware, it can also interfere with the fixes we need to make. Please disable TeaTimer for now until you are clean.1. Right click Spybot in the System Tray (looks like a calendar with a padlock symbol). Choose Exit Spybot S&D Resident2. Run Spybot S&D 3. Go to the Mode menu, and make sure Advanced Mode is selected.4. On the left hand side, choose Tools > Resident uncheck Resident TeaTimer and OK any prompt and Restart your computer.Note: If TeaTimer gives you a warning afterwards that some changes were made, allow this instead of blocking it.If TeaTimer will not turn off then uninstall Spybot until we are done cleaning.----------Download ComboFix? by sUBs from one of the below links. Be sure top save it to the Desktop.Link #1Link #2**Note:  It is important that it is saved directly to your DesktopClose any open Web browsers. (Firefox, Internet Explorer, etc) before starting ComboFix.Temporarily disable your antivirus and any antispyware real time protection before performing a scan. Click this link to see a list of security programs that should be disabled and how to disable them. Double click combofix.exe & follow the prompts.Vista users Right-Click on ComboFix.exe and select Run as administrator (you will receive a UAC prompt, please allow it)When finished ComboFix will produce a log for you.Post t... Read more

14 more replies
Relevance 51.25%

I am using windows xp sp2From the taskmanager how can i launch the application whose process is already running.for example,i am using "Search Everything" desktop search utility.i can launch it from my desktop.once i am finished using it, when i close the application , the process still runs and i am able to see it in taskmanager->processes by name "Everything.exe"Now, suppose i want to again use the application, and i do not want to launch it from desktop icon, but want to start it from my taskmanager->processes, how can i do this...Hope i made my question clear. if not dont hesitate to reply i will try to make it further clear.in short the question could also be framed like this."how can i launch an application from my taskmanager whose process is already running"

Answer:how can i launch an application from my taskmanager whose process is already running

Kill Everything.exe process first.

6 more replies
Relevance 51.25%

Hi, so lately i've found that when launching a application windows defender does a full scan of all its files etc, not sure if this is exactly normal but when running apps with multiple files eg photoshop with presets fonts etc, it scans them all which not only makes it longer to actually start the application but the whole computer down, i have one 1TB 7200RPM disk that i am running and 16gb ram,

More replies
Relevance 51.25%

Lately when my pc boots, if I click firefox I have to wait approx 1 min before it decides to lunch.
Also a few applications take ages to install. As of writing this, I'm currently installing a SATA docking station and so far its taken 10minutes with the progress bar currently on 37%

I did notice that if I ran Advanced System Optimizer and cleaned the registry and that then the problem would go but after a reboot the problem returned. Any ideas?

Windows 7 64bit
Firewall = Comodo
Antivirus = Microsoft security essentials
 

More replies
Relevance 51.25%

I loaded Lotus SmartSuite Release 9.8.1 onto my system with Windows 10, 64-bit operating system. How do I prevent the automatic launching of the SmartSuite tool bar, which appears at the top of the screen?

Answer:How to prevent auto launch of Lotus SmartSuite toolbar?

Open Task Manager / click on the Startup tab, right click on Lotus SmartCenter and disable.

0 more replies
Relevance 51.25%

I loaded Lotus SmartSuite Release 9.8.1 onto my system with Windows 10, 64-bit operating system. How do I prevent the automatic launching of the SmartSuite tool bar, which appears at the top of the screen?

Answer:How to prevent auto launch of Lotus SmartSuite toolbar?

Open Task Manager / click on the Startup tab, right click on Lotus SmartCenter and disable.

more replies
Relevance 51.25%

does anyone know what could be causing this?

i did a little systam cleanup of some things with the advice of a kind fella in the security forum, but now windows media auto launches.

also, should i have my pc start up in normal mode, or under selective startup? i had to put it in safe mode, then when i was done i forgot what it was originally set as.

anyway, any help would be appreciated
 

Answer:windows media player auto launch at startup

12 more replies
Relevance 50.84%

Quote:
An online retailer is taking orders for a Hewlett-Packard laptop that includes Intel's latest Core i3 processor, providing details of the chip maker's next-generation laptop processor ahead of the product's official launch.
ECost, a U.S. online store, is taking orders for an HP Pavilion dv6-2157sb laptop with the Core i3-330m processor. The processor runs at a speed of 2.13GHz, according to the listing.
The laptop is priced at $919 and includes 4GB of DDR3 memory, a 320GB hard drive, wireless networking, a 15.6-inch screen and the Windows 7 OS


Read more -
Online retailer jumpstarts Intel's Core i3 chip launch

Answer:Intel's Core i3 chip launch.

This is an exciting release. If it's anything like the new 1156 i7 and i5s it will be a great CPU.

I may regret buying a laptop today. Mine has a Core 2 Duo but great memory (DDR3) and a 7200RPM HD.

1 more replies
Relevance 50.84%

I have a game application (Singularity) that used to work fine just a few days ago. Now it will not start at all. There is no error message. But I found a corresponding Event ID 1000 in the Event Viewer Log. Details are below.

This is installed on Windows 8.1.

I have already run "sfc /scannow" at an elevated command prompt with the result that no integrity violations were found.

I have also done a full uninstall and re-install of the application, but the result is the same.

I'd greatly appreciate any help with this!

Faulting application name: Singularity.exe, version: 1.1.0.49069, time stamp: 0x4c362bed
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17415, time stamp: 0x54504ade
Exception code: 0xc06d007e
Fault offset: 0x00014598
Faulting process id: 0x1b00
Faulting application start time: 0x01d097f47aed42a4
Faulting application path: F:\Program Files (x86)\Activision\Singularity(TM)\Binaries\Singularity.exe
Faulting module path: C:\Windows\SYSTEM32\KERNELBASE.dll
Report Id: c3a45d67-03e7-11e5-829c-d850e6d128f2
Faulting package full name:
Faulting package-relative application ID:

Answer:Application crash on launch; Event ID 1000, Kernelbase.dll

I understand I could try replacing Kernelbase.dll, identified as the faulting module, with a new copy. But I don't think the file is corrupt. Windows Resource Protection did not find any integrity violations. And I haven't found any other applications to have problems.

I'm just not sure what might have changed since I last started the application in question. Unfortunately, I have restore points disabled on my machine, so I cannot simply go back in time.

What can I do to resolve this problem? Thanks!

4 more replies
Relevance 50.84%

had this problem started a few weeks ago, really sick of it. whenever i open itunes/skype/any file vista asks me what application i want to launch it with. i cant even go to system restore and return it to a previous setting as i dont know what application to get on the program.

please help, i know very little about computers
 

Answer:Solved: Whenever I open a program it asks what application id like to launch with

Try this fix: EXEFIX

Unzip the fix and extract the .REG file to the Desktop. Right-click the .REG file and choose Merge. Note that you need to be an Administrator to apply this fix.

Reboot the computer.

If the fix only opens as a text file, right-click it and select Open With > Choose Program... Then, select the Registry Editor.

If the Registry Editor is not in the list, browse to C:\WINDOWS and select regedit.
 

3 more replies
Relevance 50.84%

Hi Everyone,

First of all just wanted to say how awesome its is to be part of the forum and supporting Windows 7!

I have an issue with loading up Cisco Unity Application Suite on windows 7, whenever i try to launch the program i get the windows 7 generic error "Unity Application Suite has crashed".

Now I have the dump report windows gave me:

Description:
Stopped working

Problem signature:
Problem Event Name: APPCRASH
Application Name: Unity.exe
Application Version: 5.0.0.0
Application Timestamp: 4bde9894
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17651
Fault Module Timestamp: 4e2111c0
Exception Code: e0434f4d
Exception Offset: 0000d36f
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I tried running in compatibility modes, no luck there.

Any ideas??

Kind regards,

Ainul.

Answer:Cisco Unity Application Suite Crashing during launch - Win 7

Having a fault on kernelbase.dll is a very common issue that can stem from many things.

First thing is that this is most likely a .NET application. You'll want to try and update and install any appropriate version of .NET. Also, make sure that the application officially supports Windows 7. If it isn't, then this may very well be a compatibility issue that cannot be resolved using the Compatibility options. Lastly, of course, check to see if there's an updated version of the Cisco Unity software you're referring too.

I would typically ask for a crashdump, but seeing as this is a .NET application, you'll need to set up some things in order for Windows to produce a good solid crashdump of it. Just go through the basic troubleshooting recommendations I just offered and if those don't work we'll continue further.

1 more replies
Relevance 50.84%

Hi there,

Thanks for maintaining this site, I just found it and really appreciate the volunteer work.

My problem is that IEXPLORE.EXE gets an error when I try to launch it (0xc0000142), so I can't use Internet Explorer. This wouldn't be a problem, and I've been living with it a long time, except that I'm concerned it's preventing Windows Update from working. Windows Update gets an "unknown error" (Code 80244019) while trying to search for new updates. Either way, I figured it was time to try to fix IE. I've had a spate of virus infections lately, so my system is pretty worked over, though it appears to be clean now.

I looked for similar problems before posting, and there were a couple threads out there, but the admins tailored their responses to the specific 'hijackthis' reports of the posters and warned others not to follow the same advice they gave, so I thought I should post a fresh inquiry. Still, if there's another thread you think would help me fix the problem, I would be happy to get the link.

Thanks again, and here's my hijackthis log.

Bako
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 7:54:08 PM, on 1/14/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v6.00 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
D:\Program Files\AntiVirus\Avast\ashDisp.exe
D:\Program Files\Portrait Displays\Pivot Software\wp... Read more

Answer:IE won't launch (The application failed to initialize properly (0xc0000142))...

11 more replies
Relevance 50.84%

Hi,

I have recently bought a game using Games for Windows Liave.

As soon as I launch the game it crashes causing a computer restart. I just get a black screen, a blue screen of death containing the message "DRIVER_IRQL_NOT_LESS_OR_EQUAL" and then the computer restarts.

Previously when I tried to run the game it complained about a lack of virtual memory. I set Windows to automatically manage page file sizes under virtual memory options and it seems to have solved this problem. I no longer get 'not enough virtual memory' errors.

This crash only happens with this application.

I have updated my graphics card drivers to the latest version but this did not solve the problem.

I have attached my Dxdiag.txt file giving information on my system and a zip archive of recent Minidump files produced by the BSOD crash.

I greatly appreciate any help you can give me in solving this problem. If you require any more information, post a reply and I'll get it for you as soon as possible.

Tommy

Answer:[SOLVED] Windows 7 BSOD crash on application launch

Hi -

Run -- http://www.techsupportforum.com/f217...ed-473665.html

Full system info, please - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

3 more replies
Relevance 50.84%

I have recently purchased an HP Pavilion laptop pc with Windows 7.

Whenever I touch the mute button or the volume control (whether I'm in a game, at the desktop, in email, etc.), Microsoft Excel is launched. I have Office 2003 Professional.

Any suggestions on how to correct this?

Thanks in advance.

Dan...

Answer:Mute button/volume buttons launch application

Sounds like your keys are not mapped correctly. Does HP have some utiliity that does that for your system?

Also check the control panel and keyboard. You might be able to map those keys there.

7 more replies
Relevance 50.84%

Hello,

I'm wondering if anyone has a solution to this: lately, when I update an application which I have in my Quick Launch toolbar, its icon move to the end of the list of icons (as if it were a newly installed program and not one that had simply been updated). This means every time I update, say, Firefox, or Thunderbird, or Seamonkey, etc., I have to go into the Quick Launch toolbar and drag it back to its proper place.

Is there any way to address this or is it something that's changed in how Mozilla updates its programs? Ideally (and what used to happen) is that most program icons stayed put after the programs they pointed to were updated.

Thanks for any help anyone can provide!

Answer:Order of icons in Quick Launch changes after application updates

What is happening is that the update uninstalls the currently installed version, thus it is no longer in the QL area, then it installs the new version which is placed to the right of all existing icons. At least that is my guess.

4 more replies
Relevance 50.84%

Very recently(and suddenly),I've begun having issues with extreme slowdowns on launching applications and an occasional BSOD (stop: 0x00000077). This is a networked work computer using windows xp pro sp3, and the only major change to software prior to the issue was installation of logitech software for my g600 mouse.
I have already taken the following steps to no effect:
1. Defragmented hard drive
2. Error-checked disk
3. Ran rKill and fully scanned system with malwarebytes
4. Checked IDE settings were on DMA (via tutorial, this exceeded my understanding of what exactly I was doing)
5. Disabled unneccessary startup apps
6. Attempted system restore with no noticable effect
7. Memory test was ok

This computer is somewhat old and I suspect there may be a hardware issue, but I'd like to confirm my findings with someone more knowledgable. I tried to take a Speccy snapshot, but I encounter BSOD everytime I try to run it. If anyone can provide a method of fixing the Speccy BSOD or a comparable program for snapshots, I'll post it.

I'm an intermediate user at best so I apologize for any misunderstandings or incomplete information. Thank you in advance for any help or suggestions

-Edit-
Just to clarify, the BSOD seems to happen at random, I didnt mean to imply it was related to launching applications.

Answer:Long delay on application launch and occasional BSOD

Let's try this.Download/install BlueScreenView, http://www.nirsoft.net/utils/blue_screen_view.html .Double-click BlueScreenView.exe file.When autoscan is done (screen comes up), click Edit/Select All...then File/Save Selected Items.Save the report as BSOD.txt.Open BSOD.txt, copy all content and paste it into your next reply.Louis

3 more replies
Relevance 50.84%

Hello,

Some History: I ran Secunia Online Software Inspector as part of another Topic related to clearing up some malware. I got a message that i needed to update Adobe Reader 7.X. When i hit the link, it gave me a Windows Installer error message: The upgrade patch cannot be installed because the program to be updated may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be updated exists on your computer and that you have the correct upgrade patch. I verified that Adobe Reader 7.X was in my program files. Tried to delete it there and also in Add/Change progams, but got an error message...Error 1327. Invalid drive: h:\. I was refered to another topic that discussed remapping registry/drive assignments, and I found that there were a few items that were mapped to drive H which i changed to drive C. This resolved my issue and i was able to download and update Adobe Reader 9.1, the latest version.

However, when i tried to use Adobe Reader 9.1, I get the following error message:

" This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem "

I've tried uninstalling, reinstalling v9.1 and also reinstalling v.8. I continue to get the same error message. I'm not sure if I created a problem when I redirected the drive mapping as mentioned above.

I've also noticed a lot of Error lines in my Event Viewer / Systems.

Any sugg... Read more

Answer:Adobe Reader - cannot launch, application configuration error

I'd say ditch Adobe altogether and try Foxit Readerhttp://www.foxitsoftware.com/pdf/reader/Much better and less bloated

8 more replies