Computer Support Forum

wifi link 5100 in X200 shows disconnected

Question: wifi link 5100 in X200 shows disconnected

My X200 stop connecting with my wifi network. The troubleshooting in the hardward tool, it says "the wireless adaptor is disabled or uninstalled". I have checked and bluetooth is working fine.

Relevance 100%
Preferred Solution: wifi link 5100 in X200 shows disconnected

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: wifi link 5100 in X200 shows disconnected

Hi and welcome to the forum!

Try the following:-

-Make sure that the hardware switch on the left is turned on (although I guess it already is since your Bluetooth is working).
-Press Fn-F5 -> Radio on the wifi.
-Go in the BIOS -> Config -> Network -> make sure internal wireless is turned on.
-Reinstall the wifi driver:- http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70476
-If you use Access Connections, then uninstall it.

Keep us updated.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution! Lenovo Deutsche Community Lenovo Comunidad en Espaol Visit my YouTube Channel

1 more replies
Relevance 78.88%

Hello!

I recently bought an Acer Aspire laptop (18.4" monitor). I am having difficulty connecting to the internet with this computer, and perhaps someone here can help me out. Here is some information:

Network Adapter: WiFi Link 5100 AGN
Router: Verizon Wireless (Model Name: MI424-WR)

Wireless network connections are detected, and the connection is "strong". However, when I try to connect, it always fails. When I go to the command prompt, and type "ipconfig" I see "Media Disconnected". I know there is a wireless button on the Acer's, but this is automatically turned on during startup, so I know this is not the problem. For some reason, my router is just not connecting to my network adapter, and I am unsure how to resolve this problem. Thanks for any insight of this issue!

Answer:Media Disconnected (WiFi Link 5100 AGN)

Maybe perhaps my wireless router is just not compatible with a Windows 7 64-bit system...

1 more replies
Relevance 77.43%

Hello, I'm trying to get wifi working on my x200, but nothing I try seems to work. Initially, in XP or Windows 7, the card wasnt even detected, so wouldn't come up in the unrecognized devices section in device manager.  I installed/uninstalled the drivers several times but nothing changed. I then opened up the Thinkpad and moved the wifi card from the first slot to the second.  Upon booting, in Windows 7 and again in xp, the card was recognised, but a code 10 error came up. I've tried replacing the wlan card with one from an R60, but the x200's boot software prevented the PC from booting up. Can anyon help? Thanks John  

Answer:X200 and Intel Wifi Link 5100

Update to my first note.  After a day of installing countless drivers, bios updates and whatever else.  I'm pleased to say that my x200 is now woking in XP with wifi on the 5100. The PCI slot the 5100 card was in to start with did not register any device to be present.  The second slot, recognised the card but gave a code 10 error. I also followed the steps outlined in: kbartke's post on resolving the code 10 on 5100 issue.  That had no immediate effect, but may have eventually solved the problem. I also updated the bios to 3.02. The strange thing that seemed to work was changing the machine's name.  Once restarted, the wifi light came on. I now have to figure out how to get rid of all the bloatware i managed to install in my attempts to get this working... John

1 more replies
Relevance 86.1%

Hello everyone, I got one set "X200 7458CTO",there is Intel WiFi 5100 wireless card buildin machine.OS: Windwos XP SP3 the WiFi used works good for the first month, till one time i using sleep mode instead of shut-down mode at the night, then the second day when i boot my machine, the WiFi LED under LCD does light,(the wireless switch is always On), and the equipment got a yellow [?] in device manager, then i reboot machine(complete reboot, not sleep), it disappear in device manager, it's missing in my machine, looks like i didn't have this hardware equipment. then i reboot, it surprise me that it come back, and works good. this happen for serval times, and it happen more high frequency recently, even this WiFi card is gone for whole this week. btw:im using 12.4 version 5100 wifi driver from intel website also PROSet software installed on my machine.BIOS i have update to newest lease 3.08 version.Power manager/driver also is newest version 1.60Hotkey feature is the newest release on Lenovo website im guessing is the problem happen with power manager of 5100 anybody have any idea i can try,  any suggestion will be appreciatethanks for attention on my question,

Answer:x200 WiFi 5100 missing

alphalogin wrote:
 
im using 12.4 version 5100 wifi driver from intel website also PROSet software installed on my machine.

Have you tried uninstalling the Intel driver package and installing the Lenovo 5100 driver for the X200?
 
If not, you definitely need to try that toi see if the problem persists.
 
Cheers,
 
Bill

2 more replies
Relevance 83.64%

Hi Guys,
This is Viral. I am using an Acer laptop model ASPIRE 4736 since the last five years. There haven't been much issues with it. except for the battery and thats it. But recently, since last two weeks I noticed that my Wifi would stop blinking after sometime after I start my laptop and then it wouldn't work even when I try to turn on and turn off the Wifi switch(it doesn't respond anything). I tried searching the net for this issue using my office laptop and found that a system restore would help to solve this issue. Since I remembered that I updated Java as well as there was this ad software which got installed and I had unistalled it. So I did a system restore and then when I opened the device manager, I am not able to see intel r wifi link 5100 driver on it. I tried restarting my laptop and did everything and couldn't find the driver(it was there before the system restore). But later on the same day, the driver got installed automatically and the WiFi started working but only for a couple of minutes after the restart and then it stopped. So  I did the system restore again to the date when everything was working perfectly and when i did that, again my intel r wifi link 5100 driver is not shown on the device manager(network adapters). I don't if it would automatically get installed or not but its sure that the WiFi issue still be there. So can you please help with this issue?
1. Help me get the intel r wifi link 5100 driver back
2. Help me the solve the WiFi issue... Read more

Answer:Issues with WiFi as intel r wifi link 5100 is not installed after d systm restor

Select Model, Select Operating System, Download your Drivers
 
There is also a hardware detection tool to assist you.
 
http://us.acer.com/ac/en/US/content/drivers
 
If the software is listed in add/remove programs; Uninstall it.
 
If the device is listed in device manager; uninstall it.

16 more replies
Relevance 83.64%

Hi Guys,
This is Viral. I am using an Acer laptop model ASPIRE 4736 since the last five years. There haven't been much issues with it. except for the battery and thats it. But recently, since last two weeks I noticed that my Wifi would stop blinking after sometime after I start my laptop and then it wouldn't work even when I try to turn on and turn off the Wifi switch(it doesn't respond anything). I tried searching the net for this issue using my office laptop and found that a system restore would help to solve this issue. Since I remembered that I updated Java as well as there was this ad software which got installed and I had unistalled it. So I did a system restore and then when I opened the device manager, I am not able to see intel r wifi link 5100 driver on it. I tried restarting my laptop and did everything and couldn't find the driver(it was there before the system restore). But later on the same day, the driver got installed automatically and the WiFi started working but only for a couple of minutes after the restart and then it stopped. So  I did the system restore again to the date when everything was working perfectly and when i did that, again my intel r wifi link 5100 driver is not shown on the device manager(network adapters). I don't if it would automatically get installed or not but its sure that the WiFi issue still be there. So can you please help with this issue?
1. Help me get the intel r wifi link 5100 driver back
2. Help me the solve the WiFi issue... Read more

Answer:Issues with WiFi as intel r wifi link 5100 is not installed after d systm restor

Select Model, Select Operating System, Download your Drivers
 
There is also a hardware detection tool to assist you.
 
http://us.acer.com/ac/en/US/content/drivers
 
If the software is listed in add/remove programs; Uninstall it.
 
If the device is listed in device manager; uninstall it.

18 more replies
Relevance 80.77%

Maybe this problem is not the Mobile Intel 4 family express chipset but thw wireless card? I just received an R400 with the above intel media graphics accelarator. Unfortunately, when playing an game like Second Life, it completely locks up the laptop. When in wireless mode, the wirelss connection shuts down. There is no way to get it back without rebooting the computer. The same is true when connected by a LAN. I checked to make sure I have the latest driver for the chipset. As I am sure everyone is aware, millions of people use Second Life for work and play. Its too bad I cannot use this laptop. Any suggestions? Mac

More replies
Relevance 80.77%

Hello,I purchased a ThinkPad SL400 2743-4UA, My WLAN  is "Intel(R) WiFi Link 5100 AGN",and Our Wireless Router is "Dir-615",The problem is that My WALN can find the wireless network,but can't connect to it successfully,it always shows "Connected Limited Devic", I don't know why? anybody can help me?

Answer:Intel(R) WiFi Link 5100 AGN

hi welcome to forum regrding not finding wireless network either your sid is hidden, in this case u have to put wireless point name and password and try to connect manually.. hope it will works





LEOVO SL500 WITH VISTA ULTIMATE 27464WM WITH 4GB RAM

1 more replies
Relevance 79.54%

Hi, since my WLAN Card seems to be broken I bought myself a new Intel Wifi Link 5100 for my W500. After I replaced the old card with the new one, I get a "1802 unauthorized network card error".I googled for the problem an now I am completely pissed about lenovo. My W500 has a standard slot for such cards, but the W500 has a bios which checks cards against a whitelist and I cannot turn this completely useless check off.Any idea what I could do?2 weeks ago I started thinking about buying a new notebook after christmas. Now I wonder, whether the W530 suffers from the same problem. In the moment I am not sure, whether it makes any sense to buy another lenovo product, when it turns out, it could be crippled the same way as my W500. So does anybody know, whether the W530 suffers the same problem. A last question? What happens, when I plug a WLAN-Stick into USB? Must it also be authorized by lenovo and how do I find out, which products are authorized? Thanks in advance Thomas

Answer:W500 and Intel Wifi Link 5100

welcome to the community.
 
sorry for your troubles.
afaik, all ThinkPads of at least the last 5(?) or more generations have had a BIOS whitelist for mPCI/e WLAN / WWAN options. as i understand it, this is due to getting approvals from numerous "Communications" regulatory agencies around the world for the cards. unfortunately, i've never seen the whitelists published anywhere, so we normally go by the FRU #s included in hardware maintenance manuals when folks ask for advice on compatible cards.
 
re: the USB WLAN stick, you should have no issue similar to a whitelist block.
 
regards.
 
 
edit: correction and clarification.

9 more replies
Relevance 79.54%

Howdy

I recently started an internship in Egypt about a week ago. When I first got here the wireless internet worked fine (albeit a bit slow) in my apartment and around the campus. However last thrusday the Wifi on my laptop quit working. I have a Intel Wifi Link 5100 AGN that has Windows 7 RC on it right now. The adapter picks up the signal but when you try and connect it gives 'limited connectivity " = no internet. I tried using the Troubleshooter but when used it just says that The Diagonostic Policy service is not running and therefore it cannot fix the the problem. I was wondering if anyone had a solution to this problem.

Thanks

Answer:Issue with Intel Wifi Link 5100 AGN

  
Quote: Originally Posted by turkeymanwill


Howdy

I recently started an internship in Egypt about a week ago. When I first got here the wireless internet worked fine (albeit a bit slow) in my apartment and around the campus. However last thrusday the Wifi on my laptop quit working. I have a Intel Wifi Link 5100 AGN that has Windows 7 RC on it right now. The adapter picks up the signal but when you try and connect it gives 'limited connectivity " = no internet. I tried using the Troubleshooter but when used it just says that The Diagonostic Policy service is not running and therefore it cannot fix the the problem. I was wondering if anyone had a solution to this problem.

Thanks



try this either set a hard coded dns

or hard code the ip if you know what your network ip address numbers are
that your access point uses

so say some thing like
this is very very common here

IP: 192.168.1. 100-150
SUBNET: 255.255.255.0
GATEWAY:192.168.1.1

and find a dsn server



dont use them numbers there just make sure that your using the right set for the network that your connecting too
i have the same card in my laptop and its a work horse and some


also is the network that your connecting too secure make sure you have your settings right

6 more replies
Relevance 79.54%

Hi I have a Sony Vaio VGN-FW11E Laptop with an Intel WiFi Link 5100 AGN.
On the front is a switch to turn of the Wireless adaptor & a little green light that goes out when you switch it off.
Normally when I turn on the computer it comes on automatically but sometimes it does not & when I look at Device manager it is missing. The only way I can fix it is to turn the computer off & on again. Sometimes I have to do this several times before it will work.
It also goes off by itself if the computer is left on for any length of time without being used.

any ideas ?

Answer:Intel WiFi Link 5100 AGN disappears

upgrade the driver.. look for the lastest version of the driver and upgrade it..

2 more replies
Relevance 79.54%

Ok I have a Asus G60VX thats less than a year old running windows 7. On Friday (three days ago) the system was working fine, I could connect to the internet and everything. Tonight when i turned on my laptop it showed that i couldn't connect to the internet. So i rebooted both my computer and router thinking it was my brother playing Xbox live. It still didn't work. So i tried the usual suspects: deleted the saved file and made a new one, went into the device manager and made sure there weren't any problems (there weren't), i even tried doing a system restore but to no avail. I tried the Fn combo on my keyboard and the switch on the front but this still didn't work. After three hours searching for a solution on my desktop (which can access the internet fine) I kinda want to take a sledge hammer to the thing. :) So at this point i'm begging for a solution! thanks!

Answer:Problem with Intel WiFi link 5100?

Hi.

Did you install any iTunes or Apple software before this happened?

For now, try resetting the network protocol tcp/ip stack. In an elevated command prompt, copy and paste this then hit enter:


Code:
netsh int ip reset resetlog.txt
Then do the same for this command:


Code:
netsh winsock reset
Reboot and test the connection. If still no good, go into Internet Explorer.

Tools | Internet Options | Connection | Lan Settings

and make sure there are no checked boxes. Then ok your way out a few times. Reopen IE and test.

If still no good, please respond about the Apple, iTunes software and/or do you have mdnsresponder.exe in the task manager?

3 more replies
Relevance 79.54%

I Have a Intel (R) WiFi link 5100 AGN, and i was wondering why i am not receiving the draft (N) quality i'm supposed to get i currently own a Belkin N1 Wireless Router.., Please help me with my problem, i also dont have as good connect to my router even though m bro has b/g he gets greater speeds.

Bump, srry i need help,here are the settings.

Answer:Help/Question? Intel (R) WiFi link 5100 AGN

hello ebartolon...
it's still is but remember this is a free forum....
since airbot already gave you the lecture on the bumping threads im not going to go into that...
but what i can tell you to do in the throughput enhancement to turn it on...
also in wireless mode put it to 802.11n as i believe right now you are using 802.11g and not using the n spec...

also even in ideal situations you are not going to get the throughput specified in the n spec or advertised...
it says *up to* because that is the maximum speed that it will go and usually the hardware never reaches that speed....

6 more replies
Relevance 79.54%

I've been having issues with my laptop and its wifi card for the past couple of months. It's an Intel WiFi Link 5100 and my internet just randomly stops working, other computers and devices still work fine, but on my computer I cannot browse the internet (however sometimes downloads don't stop for some reason). Updated my drivers, turning it off and on does nothing, and I'm pretty sure it's not my firewall but next time the internet stops working i'll make sure.

When I say it randomly stops working I mean I'll turn the computer on it will work for a bit then just stop then a little bit later it will work. No other computers or devices experience those kind of pulses here.

Answer:Windows 7 and Intel WiFi Link 5100

What AV and firewall are you using?
Some reported problems with AV and wifi.

9 more replies
Relevance 79.54%

Dear Sir or Madam, I have a Lenovo 4446-25U G530 running XP Pro and equipped with WiFi Link 5100 AGN with driver 12.2.0.11 11-17-2008.  When I attempt to update my system using the Lenovo Care, I get a message to update my WiFi driver to 12.0.0.73.  During installation I get an error message:  c:\PROGRA~1\Lenovo\SYSTEM~1\session\52wi07ww\Vista\Docs\Icons\Thumbs.db  Access is denied.  At this point installation is halted at 80%.  When I click OK on the "Access is denied" window, the installation continues until I get a messge from System Update stating "1 Package was successfully downloaded and installed"  When I view installation history, the updated driver (12.0.0.73) is listed as having been installed, however when I check for system updates using Lenovo Care, it continues to show the WiFi Link 5100 driver as a pending update.  Apparently the installation is not sucessful. Is this a Vista only update that I should ignore? Regards,  Lou













Solved!

Go to Solution.

Answer:WiFi Link 5100 Update fails

check the file and delete it, then try again.
also, you may need to run lenovo care with admin privileges ( right click and select "run as admin" )

9 more replies
Relevance 78.72%

Hello,         Im interested to use of WWAN in my laptop, My is Thinkpad T400, having with Intel(R) WiFi Link 5100 AGN.  please guide me with process accesing the simcard slot in laptop. Waiting for your reply. With Regards  Santhosh

Answer:Regarding using wwan in T400 with Intel(R) WiFi Link 5100 AGN

Hi,
 
I believe the SIM card slot is in the battery bay.  Remove the battery to access.
 
That Intel 5100 is a wifi card, not a wwan card.  Do you also have a wwan card installed, or is that what you are asking about?
 
Information on both (SIM and wwan card installation) is in the hardware maintenance manual: Hardware Maintenance Manual - T400 & R400
 
Z.

5 more replies
Relevance 78.72%

I stil use very old Toshiba A350D. Notebook works fine with Office, internet browsing and other light task.
But last days i notice a problem with wifi connection. Well, the card constantly switches off automatically. I use Intel Wifi ProSET tool and Windows 7 system tools.
Windows 7 indicator shown no avilable connections and ProSET indicator shown wifi disabled and ask for turn on wifi with hardware switcher, when hardware switcher (mechanical slider with LED on front) is in the 'on' position and LED flashes.

When this happens, the wifi card is still detected in the Windows device manager. I reinstalled all drivers, but this didn't fix the problem.
The card can be switched on and off several times per minute, but most often when the card is turned off it is hard to activate it again.

Fn + F8 works well, if WiFi Link works properly himself.

Is there still someone who remembers this model and met with such behavior?

More replies
Relevance 78.72%

i have Intel(R) WiFi Link 5100 AGN wifi adapter and it doesn't support packet injection.
plzzzzzzzzzzz tell me about any patch file to resolve it. i want't to enable packet injectin on it. help me ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Answer:Intel(R) WiFi Link 5100 AGN packet injection

  
Quote: Originally Posted by Ajk


i have Intel(R) WiFi Link 5100 AGN wifi adapter and it doesn't support packet injection.
plzzzzzzzzzzz tell me about any patch file to resolve it. i want't to enable packet injectin on it. help me ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,



As far as I know it doesnt and why do you want to do packet injection? we might be able to help with a work around
Ken

4 more replies
Relevance 78.72%

I am new here. I'm not even sure if this question is in the correct forum (I hope so). I have a Toshiba Satellite A305 laptop that I purchased a few months ago. In the last month, the wireless connection has been dropping like mad ! And more recently, when it drops, it says it can't find any wireless networks. I then have to perform a hard shut off (by holding the power button till it powers down) and wait a few minutes to turn it back on. I have uninstalled the wireless adapter and then reinstalled it and that didn't work either. Also, all the drivers are up to date. I am very frustrated at this point and don't know what to do. Any help that anyone can offer would be greatly appreciated !!

Thanks !!
 

Answer:Intel Wireless WiFi Link 5100 problem

It is always a VERY good idea to check the microfilters (if using ADSL) which are fitted into your phone sockets and make certain that you have microfilters in any socket in the house. Microfilters are very cheap to get hold of and its worth having a few spare.
 

1 more replies
Relevance 78.72%

I stil use very old Toshiba A350D. Notebook works fine with Office, internet browsing and other light task.
But last days i notice a problem with wifi connection. Well, the card constantly switches off automatically. I use Intel Wifi ProSET tool and Windows 7 system tools.
Windows 7 indicator shown no avilable connections and ProSET indicator shown wifi disabled and ask for turn on wifi with hardware switcher, when hardware switcher (mechanical slider with LED on front) is in the 'on' position and LED flashes.
When this happens, the wifi card is still detected in the Windows device manager. I reinstalled all drivers, but this didn't fix the problem.
The card can be switched on and off several times per minute, but most often when the card is turned off it is hard to activate it again.
Fn + F8 works well, if WiFi Link works properly himself.
Is there still someone who remembers this model and met with such behavior?

More replies
Relevance 78.72%

I have an Intel WiFi Link 5100 AGN and it keeps crashing my laptop. I would be working and my screen would freeze randomly and my computer would remain unresponsive. This only happens when I turn on my laptop's wireless card and put it to use.

I tried multiple drivers but the newer ones froze my computer faster. I recently did a fresh install of Windows 7 Home Premium 64 bit and it still does the same.

Uninstalling the driver and rebooting while letting Windows install a default driver yields the same results.

Much help needed!

Answer:Intel WiFi Link 5100 AGN Causing Crashes

I'm having the exact same issues. It's driving me nuts! Have you had any luck in resolving this? I've just tried the latest drivers from Intel and it hasn't fixed it.

6 more replies
Relevance 78.31%

Hello, does anyone know if it is possible to upgrade your wifi Lenovo R500 from Intel WiFi Link 5100 to Intel Dual Band Wireless-AC 7260. Reference to buy:  http://www.intel.com/content/www/us/en/wireless-products/dual-band-wireless-ac-7260-bluetooth.html Reference that is in inside the laptop/:- The Long one.http://www.intel.com/content/www/us/en/wireless-products/wifi-link-5100-brief.html













Solved!

Go to Solution.

Answer:Lenovo R500 wifi upgrade from Intel WiFi Link 5100 to Intel Dual Band Wireless-AC 7260

Welcome to the forum!
 
You'll need a modded BIOS in order to use that card in R500. Stock BIOS will not allow the machine to boot with it.
 

6 more replies
Relevance 77.9%

This has been happening for the past three days. I just recently bought a laptop, the Toshiba Satellite A305-S6898, with Intel? WiFi Link 5100.

I would be just surfing on the internet and then the WiFi link would randomly just stop working. I would go to the available connections window, and the network i'm connected to would say 'Connected with limited connectivity', and then it would disconnect and then it would not be able to detect any networks, even though it previously did before. I know it's not a network problem because the same problem occured on two different networks I have set up in two different places. The device manager does not report anything wrong with it, and I did not randomly turn off the wifi for any reason. I would have to reset my laptop in order to fix the problem.

Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Owner>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : ******-PC <---i personally blocked that out.
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Wireless WiFi Link 5100
Physical Address. . . . . . . . . : 00-21-5D-74-13-0E
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfigura... Read more

Answer:Intel WiFi Link 5100 Randomly Stops Working

Yes! Agreed! Same thing happening here. Any ideas?

Bumpity Bump.

12 more replies
Relevance 77.9%

Am looking for a hardware solution: Pavilion DV7 1270 usUPGRADED TO WIN 10  64bit from WIN 7 64bit My current WIFI Wireless/Bluetooth card is an INTEL WIFI LINK 5100 agn. ( Original card) This is NOT SUPPORTED in Win 10... WIFI  no longer works. There are no solutions offered in HP Web assistance or via INTEL or MICROSOFT. I would simply like to find a compatible(upgrade) card that works in this system  with WIN 10? The card is accessible and replaceable ( in RAM Bay... as i remember) INTEL no longer supports this card (to and through win 10) HP Laptops are notoriously finicky with WIFI card replacements...? Short of adopting a usb dongal WIFI/BLUETOOTH option, I would like to effect an internal upgrade to the original card... seems simple enough? Thank You for whatever guidance you might afford    

Answer:after win 10 upgrade, intel wifi link 5100 no longer support...

Hi: You may be able to get the card to work if you fiddle with some of the advanced settings on the advanced tab for the card in the device manager. I have 3 HP business notebooks...one has the Intel(R) PRO/Wireless 3965ABG card, one has the Intel Intel WiFi Link 4965AG card, one has the Intel WiFi Link 5300 wireless card. The first two I didn't have to do anything to make them work. The 5300...device is present in the device manager saw wireless networks but would not connect when I clicked connect. I went into the advanced settings tab and I think I enabled WMM and the card works just fine and has so ever since. Try tweaking one of the settings in the advanced settings tab. I wish I remembered exactly which setting I changed that made it connect. I was ticked off, so I wasn't paying attention to what I was doing. Could not understand why two older cards worked perfectly and the newer one wouldn't. Changing the wireless card would be extremely problematic as you are limited to just the cards listed in the service manual and half the time the ones listed in the manual cause the notebook not to boot up until the card is removed. Also, if you can't get the Intel 5100 to work, you can forget any of the others listed working on W10. I am very sure that changing one of those advanced settings will allow the 5100 card to work.

9 more replies
Relevance 77.9%

I have a Gateway FX series 17" laptop and yesterday when I got home from university and took the computer out of my bag to start working, the wireless card just didnt exist, no networks were recognized and when i tried to troubleshoot it told me that no device was connected. Wired internet works just fine. And the wireless card appears in the device manager.

methods i have tried to no avail:
-turning the wireless switch on and off
-uninstalling the device and rebooting
-updating drivers
-manually downloading driver from Intel's website
-insulting the device's mother

I'm suspecting this might be a hardware issue but if anyone has some advice that would be great. For the time being I am just using a wired connection but I'm going to need the wireless when I'm. back in class

,Thanks guys

Answer:Intel Wifi Link 5100 AGN wireless adapter not recognized

Please run an ipconfig /all , snip and upload the output so we can check. ALso please upload the event viewer logs

Start>cmd>right click and run as admin>ipconfig /all
Please provide us with your Event Viewer administrative logs by following these steps:
{Instructions courtesy of writhziden}

Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file here.

1 more replies
Relevance 77.9%

Hi,

I just bought a Sony Vaio with Intel Wireless WiFi Link 5100 Network Adapter.

I primarily use the notebook at my home & office network.
Home Network Router: Linksys WRT54G
Office Network Router: Beetel 450BXi (ADSL2+Modem)

The issue am facing is while am on to the network (mostly home network) suddenly it goes into limited connectivity & gets disconnected; while other PC's remain connected.

And then you have to either re-install the Wireless LAN driver or re-start numerous times.

This has been happening regularly. Pls assist in resolving the issue.
 

Answer:Solved: Limited Connectivity: Intel WiFi Link 5100

6 more replies
Relevance 77.9%

I have problems getting online using my T00 after installing windows 7. The rest of the computers in my network will be affected if my T400 is online. I saw the version for my intel wifi link 5100 to be of version 12+ but i understand that the latest driver is version 13. I downloaded the latest firmware from the internet and intel website but after updating/reinstalling, the driver is still version 12+. I really need to update the driver as I need to access my wireless network desperately and my T400 cannot allow me to do that. Any ideas?

Answer:intel wifi link 5100 agn + limited wireless connection

fierC wrote:
 
I saw the version for my intel wifi link 5100 to be of version 12+ but i understand that the latest driver is version 13.

Version 13 has been on the Lenovo support site for a couple of months now.....
 
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73611
 
Cheers,
 
Bill

2 more replies
Relevance 77.9%

This is a new machine (to me). It is a T-500 2242CTO with an Intel WiFi Link 5100 AGN card and a fresh install of Windows 7 64-bit.  I successfully VPN using Ethernet from this machine and wirelessly from other machines in my home network.  However, wireless VPN connectivity from this machine fails 100% of the time.  Current drivers and updates are installed.  I am using the Windows VPN client and receive the following message: Error 800: The remote connection was not made because the attempted VPN tunnels failed.  I turned on logging and found no useful information, to me, in the mounds of data generated.  I've also un-installed the wireless driver, re-installed it, un-installed Lenovo Access Connections and the same error continues.  Has anyone encountered this issue or have suggested fixes?

More replies
Relevance 77.9%

wifi link 5100 agn adapter's driver has unknown language on Thinkpad T500. Symbols () but no letters presents in Advanced Tab.No results with playing language format have done. Need help . Thanks.(windows 7 64bit, Thinkpad T500, Driver ver. 14.2.0.10)

Answer:wifi link 5100 agn adapter's driver has unknown language

Seems to be cyrillic. Transformed with SC-Unipad into ISO-8859-5 the result is: ??????????
Google translator translates it to "given"
 
Does it make sense in the context?
 

2 more replies
Relevance 77.08%

Update retriever does not have the correct download for the 6474 series it lists the Thinkpad driver 7yc10ww as the only download option.Message Edited by Davidmf on 01-27-2009 02:43 PM

Answer:T400 WiFi Link 5100 Incorrect Driver Update Retriever

I'm not sure what you are asking for as 7yc10ww is not a valid driver file name (they all have 8 characters in the name). However, the current Intel 5100 driver for Vista can be downloaded from here..... http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70505 or for XP its here.... http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70504 Cheers, Bill

3 more replies
Relevance 77.08%

Then I wonder if Lenovo 3000 N500 4233 series supports N network with the following network card Intel WiFi Link 5100 AGN.When I linked up with Rauter with N, so I got a speed of about 65 Mbps, but far away from thespeed of 100-130 Mbit/s +.I have spoken to Lenovo and received a reply to update drivers on all that goes too uppdate and see if it works.If I do not find them at Lenovo, I would go to Intel and Microsoft homepage to see if there were any new drivers.Slowly and soil, I made it and found newer drivers for the network card but to no avail.I spoke with Lenovo again and got the answer that it could not do more because the card was 65 Mbps,which is certain to N working. In other words, nothing is broken can not be repaired, even if it onlyperforms 1/4 of what it should be!I was still unhappy, I could go back to the medamarkt and return the machine.I wonder how somone can say something like that when intel WiFi Link 5100 AGNshall work up to 300 Mbps while It can't get more then 65 Mbits/s.For if I have 65 then I am on N linkage because the G only goes up to 54 Mbit/s.The most strange is that not only was the serier of Lenovo 3000 N500, having problems with Intel WiFi Link 5100 AGNnot performing as it should.The answer I got was to either leave or wait until someone will solve the problem (Lenovo,Intel or Microsoft).Plus I have age machinery that works good in 130 Mbits/s without problems while a new can not?Strange thinking about this.So what do you do?Someone who knows ... Read more

Answer:Problem with card Intel WiFi Link 5100 AGN on N500 laptop!

i have also BIG issue with my Intel(R) Wifi Link 5100 AGN card , i have a wireless router and i have 30Mbit/s  speed connection but when i test my internet connection online from diffrient website's it shows more then 300 or 400 - 500Mbit/s , WOW i dont know how to fix this issue , i also have problem to connect TV ONLINE so i can see it thru WindowsMediaPlayer 11.' I belive i have latest version drivers, and i have TOSHIBA U400 laptop. bye ,  ha det bra allihop =) 

6 more replies
Relevance 77.08%

I have a network card , the one mentioned in title on my laptop , and
Vista system, I have no idea why,but this card loses randomly (sometimes for short sometimes for quite long time) a connection with a router as well as main net, I've tried to deal with a problem by changing the configuration but it didn't work
Can somebody help me? or maybe is it possible to change a card for another one?

Answer:Intel(R) Wireless WiFi Link 5100 network card problem

i had the same problem lg laptop , i googled for weeks & came across many possible remedies but never got lucky until i decided to recover the system using dvd recovery. when done and launched windows i spent 3 hours online without a single disconnect, but after updating the wireless driver the random disconnecting came back , this time i didn't recover the whole system , i roll back driver and its working so good so far.

2 more replies
Relevance 77.08%

moderate
We're in hospital, she's I'll, I am 24/7 carer.

My Vostro 1720 connects promptly at home, WiFi or LAN.

Hospital has public use WiFi provided on each floor. Transmitter has TP-Link on the cover and twin aerials.

The Vostro can see transmitters for 4 floors, the signals come & go and, regularly disappear.

2 iPads & an iPhone stay connected unless, the signal disappears, in the same room. Signals are described as excellent or good.

The Vostro when I bring it in, after using at home,connects automatically. Twice has reached the stage when all 3 links I can see with a decent signal, can't connect, sometimes get asked for the password, run trouble shooter multiple times with no success. First time internet connection worked for 2 days, 2nd time for an hour, then couldn't log on to any link.

I'm puzzled why the Vostro doesn't hold the connection and the IOS devices do.

Public holiday over in a couple of days and I plan to catch the lady chief of the hospital and the IT manager.

I would be most grateful for queries, comments or, references to help in these encounters.

Thank you and regards

More replies
Relevance 77.08%

moderate
We're in hospital, she's I'll, I am 24/7 carer.

My Vostro 1720 connects promptly at home, WiFi or LAN.

Hospital has public use WiFi provided on each floor. Transmitter has TP-Link on the cover and twin aerials.

The Vostro can see transmitters for 4 floors, the signals come & go and, regularly disappear.

2 iPads & an iPhone stay connected unless, the signal disappears, in the same room. Signals are described as excellent or good.

The Vostro when I bring it in, after using at home,connects automatically. Twice has reached the stage when all 3 links I can see with a decent signal, can't connect, sometimes get asked for the password, run trouble shooter multiple times with no success. First time internet connection worked for 2 days, 2nd time for an hour, then couldn't log on to any link.

I'm puzzled why the Vostro doesn't hold the connection and the IOS devices do.

Public holiday over in a couple of days and I plan to catch the lady chief of the hospital and the IT manager.

I would be most grateful for queries, comments or, references to help in these encounters.

Thank you and regards

More replies
Relevance 77.08%

Hey guys firstly thanks for taking the time to read my thread.

Recently completed a custom install of Windows 7 64bit version. Have installed all the Windows updates and drivers from HP.

My wireless adapter will connect to my network with static ip address set manually but the 'automatically detect settings' option will not work and I receive the message "Unidentified Network" in the task bar.

Any help will be appreciated.

_______

**SOLUTION**

1. Reset router and apply settings again. (**Remember to write down any user names and passwords used for your ISP**)

2. Use WPA2-PSK security rather than WPA

3. Connect to network using network password

Answer:Intel Wifi Link 5100 Wireless issue with Win7 install

When I turn on the auto settings I see it comes up with some wacky ip address that isn't even in the range of my network

9 more replies
Relevance 76.26%

I have tried updating the driver several times.  I am at the most recent version of the driver, 13.3.0.24, and it is still not present as an option.  All I see is EAP-MSCHAPv2 and SmartCard or other certficate.  I do not have any of the Intel ProSet or ThinkAdvantage apps to manage wireless.  I tried to get rid of the vendor cruft.  Was that a mistake?

Answer:Thinkpad T400, Intel WiFi Link 5100 AGN Adapter, and Cisco PEAP

Yes, Alharaka. It appears you've uninstalled the Intel ProSet wifi software that enables the wifi card

3 more replies
Relevance 76.26%

We have fairly new HP DV7T laptops, with the internal Intel Wifi Link 5100 AGN card..

We have been through 3 access points at this point, i just now confirmed that i dont think our issue is access point related, at least not the type etc...

Frequently these laptops will suddenly not find ANY networks (wireless ones) to connect to..

Other laptops (dell, asus, iphones) still work fine during these periods.

I've tried playing with configuration settings on the nic itself with no luck.

Currently we have a Dlink Dap-2553 access point.. set to the 2.4ghz mode (since we still have devices that need 2.4ghz)..

I'm not sure what to do to prevent this from happening, short of using express cards, which we dont want to do..

Anyone else ran into this?

Thanks
 

More replies
Relevance 75.85%

After upgrading to WIndows 10 on my Y510P, i am constantly facing WiFi issues. It shos limited network and internet does not work. THen we have to switch to airplane mode and sometimes that also does not work. Current driver downloads page does not show Win 10 version. When can i expect the Win10 driver or there is some other way to resolve this?

More replies
Relevance 75.44%

I have had a Linksys BEFW11S4 Version 4 Wireless router for quite some time.  It works like a champ and I have one Laptop wired to it and a second using Wireless working just fine.  Recently, I received a new ThinkPad W500 Laptop with an Intel WIFI Link 5100 AGN wireless network adapter.  The older laptop (ThinkPad T60p) that works just fine with the router uses a11a/b/g Wireless LAN Mini PCI Express Adapter by Atheros.  However, the NEW laptop (the W500) with the Intel Adapter fails to connect to the Router.  It will either indicate a failure while "Waiting for Association" or it will indicate a failure when waiting to "renew IP Address".  Sometimes, it will show a signal strength close to ZERO (Even as the older laptop with the other adapter is showing a signal strength close to 100%) When I called Linksys support, I was told that the facts that the Router (a) works find with the wired Laptop and (b) works fine with the 11a/b/g NEtwork Adapter and (c) works fine when WIRED to the new laptop all indicate that the problem is NOT with the router at all -- but with the Network Adapter.  Can anyone tell me what has to be adjusted in the Adapter settings?  Right now, I am using IBM Access Connections for BOTH of the wireless laptops.  I have made sure to set IDENTICAL values for SSID and WEP (128-bit) [static] password.  I have also ensured that all OTHER settings are the same for the two laptops.  Yet, in... Read more

Answer:Intel WIFI Link 5100 AGN Network Adapter does not recognize Linksys Wireless Router

I would like to add some information that I left out that MAY be crucial here.On the NEWER ThinkPad, I am using Access Connections 5.02.  At work, the wireless adapter works properly and I am able to use the Intel Adapter.It is only at home where I have the Linksys Router that I have a problem.I also noticed that when I looked at the Wireless Driver Properties, there was NO tab for "wireless" -- which I would have expected to see....Instead there are only TWO tabs... one for "General" and one for "Advanced"... Just like what you would see for an EthernetAdapter..... this all looks a bit weird to me.....As I did not configure this laptop, I do not know if the Hotkey and Power Manager were installed BEFORE the Access Connections or not.... any ideas? TIA --Zvi

9 more replies
Relevance 69.7%

Using a T500 with its Intel wireless card Wifi Link 5300, XP Pro SP3, and Netgear router N900 (WNDR4500). Configured router to use WPA2-AES. Intranet transfers to my Netgear ReadyNAS (Duo v2) are slow. Using a lan wired connection the transfer rate is about 38Mbps and the wireless rate is 15Mbps on either 2.4Ghz or 5Ghz. (transfer test used Totu Softs Lan Speed Test) Interesting the Windows tray icon for wireless connections show "Speed: 54Mbps" for both. Should the 54Mpbs be showing at a higher rate?Should the transfer rates be higher? Any guidance will be much appreciated.

Answer:Wifi Link 5300 only shows 54Mbps on 5Ghz

To connect the 802.11n wireless LAN AP with full line rate performance:
Configure your system to Advanced Encryption Standard (AES) encryption using Access Connections (or other wireless utilities). AES is supported by all secure authentication schemes such as WPA/WPA2.
Make sure your 802.11n AP is configured to AES encryption for 11n mode. Check with your 802.11n AP manufacturer for specific instructions on how to configure AES-based security.
 
 
Best Regards,
Tanuj

9 more replies
Relevance 65.6%

I ordered an SL500, and selected Wifi 5100, yet when I checked the device manager in vista, it said 5100 AGN.  So what's the difference?  And if there's no difference, why do they allow you different selections: 5100 vs. 5100AGN on the lenovo website when you customize your thinkpad laptop?Message Edited by lenovousersl500 on 12-11-2008 03:01 PM

More replies
Relevance 59.04%

Hello all,im trying to set up a network between my laptop and desktop, im using a crossover cable to connect them together.For a random reason, both of the 2 computers show in the tray that the network cable is unplugged :SIve tried installing and un installing protocols.I only want to share my tiscali ADSL connection.Thanks very much, let me know if you need more info:)Ben

Answer:Trying to set up network,but shows disconnected?

Run the network wizard.

5 more replies
Relevance 59.04%

Good Day Everyone! I have a question:

After some time for about 10-20 minutes of being connected there will be a 2-3 minutes of disconnection. But the problem is, the connection icon (at the task bar) shows I'm connected!

What could be the problem? I tried using my other network adapter card and still I have the same problem.

Also here is a status log I found, as it might help:
Code:
<8> Jul 13 11:21:38 2009 boa[111]: DSL Link up
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: ATM_VC_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: ATM_VC_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: SW_PORT_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: SW_PORT_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: SW_PORT_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: SW_PORT_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: VLAN_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: VLAN_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: VLAN_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: VLAN_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: ACC_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: ACC_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: AUTO_PVC_SEARCH_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: AUTO_PVC_SEARCH_TBL
<14> Jul 13 11:21:38 2009 syslog: mib_chain_clear: AUTO_PVC_SEARCH_TBL
<14> ... Read more

Answer:Internet Gets Disconnected But Shows It Is Not

Have you tried connecting directly to the Prolink router to see if it still happens?
 

1 more replies
Relevance 59.04%

I tried to install a scanner and during the process it showed something about aol I put my email name and password for aol in a box.I thought it was stuck on this so I removed the cd for the install and restored to a different day. I did it again and found out that it was taking me to a regristation page and it installed fine it showed if there was a red x over the icon by the clock it did not install properly the problem is there is a red x over the network connections saying cable disconnected for lan when I pull up network connections it shows dialup america on line dsiconnected and the number of my modem and in the lan part it shows cable disconnected.I then restored to a different day again you can see I don't know what I am doing thinking it would remove that but it still was there . I get online fine but I don't know what I did to have this say disconnected. Aol was no hope they had me reset web browsers it did nothing. I got the lan to show disabled, should I have? and I cant get the dialup to not show disconnected.I must be doing something wrong installing the scanner and I really need help asap.Only have one computer and do not want anything to go wrong with this one , I had a lot of trouble with the old one. It is windows xp. How do I get it back to what it use to say?Please help! The scanner I am tryng to install is called visioneer 8700. I think I installed it properly the second time except for possibly doing something with the network thing.
 

More replies
Relevance 59.04%

My lan icon only shows in the tool bar when the ethernet cable is disconnected.
 

Answer:lan icon only shows when disconnected

Is this an issue for you? This is normal behavior.
 

6 more replies
Relevance 59.04%

I tried to install a scanner and during the process it showed something about aol I put my email name and password for aol in a box.I thought it was stuck on this so I removed the cd for the install and restored to a different day. I did it again and found out that it was taking me to a regristation page and it installed fine it showed if there was a red x over the icon by the clock it did not install properly the problem is there is a red x over the network connections saying cable disconnected for lan when I pull up network connections it shows dialup america on line dsiconnected and the number of my modem and in the lan part it shows cable disconnected.I then restored to a different day again you can see I don't know what I am doing thinking it would remove that but it still was there . I get online fine but I don't know what I did to have this say disconnected. Aol was no hope they had me reset web browsers it did nothing. I got the lan to show disabled, should I have? and I cant get the dialup to not show disconnected.I must be doing something wrong installing the scanner and I really need help asap.Only have one computer and do not want anything to go wrong with this one , I had a lot of trouble with the old one. It is windows xp. How do I get it back to what it use to say?Please help! The scanner I am tryng to install is called visioneer 8700. I think I installed it properly the second time except for possibly doing something with the network thing. this was ... Read more

Answer:dial up shows disconnected

could someone please answer:
 

1 more replies
Relevance 59.04%

Had difficulties to find a descriptive title for this.

A screenshot:


Screenshot above shows approximately this area of my displays #1 & #3:


Edge is full screen. Any content that other browsers would show in status bar which Edge doesn't have, like URL when I mouse over a link, is shown on display #3 when Edge is full screen on display #1. It is very disturbing.

Happens on both build 15002 and 15007.

Any ideas, how do I stop this?

Kari

Answer:Edge fullscreen - Mouse Over a link shows link URL on another display*

The screens are overlapping? Those screen numbers on the display settings are draggable. Drag the screens so that they don't overlap.

4 more replies
Relevance 58.63%

Is this possible. We use LEAP to access the private side of our wireless network and the standard driver on the ideapad doesnt have LEAP as an option. Ideapad Y550Running Vista 64bit. Thanks in advance!

Answer:Leap driver for Link 5100 wireless card

Try using Lenovo Access Connections software - though being designed for Thinkpads it should run OK.





//help will save the world

1 more replies
Relevance 58.22%

I working on a HP Pavilion zv6000 laptop with: AMD Athlon 64, 2GHz; 512MB PC2700; Bios ver.: F.1A; 128MB dedicated Video memory; Running XP Home Edition SP3. I have a DSL modem with a Linksys WRT54-g wireless router.

When I first got this computer in, It wouldn't even boot into safe mode. I checked the BIOS to see if everything was there. When I ran the Bios Tools Short test (estimated test time 2 minutes) it never got above 10% complete after a half hour. I tried the Long test and the same thing... it never got above the 10% mark. Using a copy of the XP repair console, I ran a scan on the HD and found several errors. I had to replace the master boot file. Then I ran the restore utility to recover back to when I knew it was working properly. When I got it to boot into Windows, I ran scans for malware but found nothing but some non critical adware, which I cleaned up. I then cleaned up the start menu and everything worked great.

Except... the ethernet cable shows up as disconnected. No indicator lights come on when I plug the cable into the jack. It is a good cable and does work on my other computers.

I went back to the BIOS setup utility > Advanced Tab, only the Embedded Wireless LAN device is shown and it is enabled. In the Boot Order Tab, it shows the order as: CD-rom> Floppy> +Hard Drive> Network Adapter. I tried uninstalling/reinstalling the NIC and the driver, I reset the DSL and router. I checked the following:

Ran cmd>ipconfig/all and:
Windows... Read more

More replies
Relevance 58.22%

I have MS Office 2003 and have recently had problems when starting my server and PC in that Outlook shows 'Disconnected' so I can't access email.Web access to the outlook email account is also blocked but other internet access is fine.Restarting helped at first.When the problem continued on switch on the next day I changed the switch sitting between my server and PC and thought that had cured the problem but this morning the same has happened again.My LAN/WAN show working fine and error messages from BT Broadband say 'can't locate network card.Where do I go from here?

Answer:No email, MS Office shows 'Disconnected'

have you tried another way into your email? eg if you are on bt go to btinternet.com and log in to the mail there. If that all works you then need to consider doing a repair on outlook or reinstall.

1 more replies
Relevance 58.22%

I have a DSl modem and then when I try to get connectyed I get an error 678.
i have checked the ipconfig and shows me "media disconnected" message.
already i have reset the modem and I have also manually put in the addresses for the IP address and the the gateway...but still "media disconnected".
have also tried another ethernet cable that works on another computer but still "media disconnected".
what else can I do?
 

Answer:windows Xp shows media disconnected

j0ckey said:

I have a DSl modem and then when I try to get connectyed I get an error 678.
i have checked the ipconfig and shows me "media disconnected" message.
already i have reset the modem and I have also manually put in the addresses for the IP address and the the gateway...but still "media disconnected".
have also tried another ethernet cable that works on another computer but still "media disconnected".
what else can I do?Click to expand...
 

1 more replies
Relevance 58.22%

Hi,

Sometimes when I start my PC, or I start it from sleep, the Ethernet shows as unplugged. If I go into device manager, it shows a yellow triangle with an exclamation mark in it (attached image). If I 'Scan for hardware changes' it starts to work again, until I shutdown or start from sleep.

I have updated all drivers, and installed all windows updates, but it still does it.

Any ideas?

Answer:Ethernet cable shows as disconnected

Did you check the Power management setting to make sure that it is not set to have the computer shut it off to conserve power? Windows 7 ethernet goes to sleep! [solved]

A lot of times the Gateway or Switch will go into "Green" mode, when the computer stops pinging back, when the Gateway sends out a request for Ping Alive, to see if the device is online. The same with the adapters.

Any device on the computer that Power Saving can be set for, should be unchecked. You can also go into the Advanced power settings and make changes to all settings for the system.

1 more replies
Relevance 58.22%

I just got a DELL STUDIO XPS Laptop which runs on Vista.

I have established an ad hoc computer to computer network with another laptop

The ad hoc wireless connection shows that both laptops are connected to the "C-Print" software that we mutually use.

However, when I go to connect to a common server we are unable to connect.

When I run "ipconfig" it shows "Media Disconnected"

There is a little "Tower" icon in the middle of the DELL laptop above the numbers on the keyboard. That is turned "ON" so I do not know why the ipconfig shows that the Media is "NOT Connected."

Could somebody please help me on this as I need to use this ad hoc connection at work?

Thank you

Answer:ipconfig shows "Media Disconnected"

I would contact your work IT people, and see if they know the answer. There could be custom settings that need to be in place before you can connect.

1 more replies
Relevance 57.81%

IE8 cannot display web pages. I've updated XP to service pack 2 and reinstalled IE8. I am not working offline. I tried to connect by clicking 'tools', 'internet options', 'connections', 'setup', then view 'wireless networks withing range'. It shows my wireless network as 'Disconnected'. BUT, I hover over the wirless icon and it shows 'Connected'. I've right clicked on the wireless network icon and it shows connected. Anyone know what's wrong. Thanks
 

More replies
Relevance 57.4%

Hi there, Does anyone knows if this will work ? I'm planning to change the 5100 AGN card with an old Intel 2200 model because I want to play with OSX86 on my X200. -- Shay

Answer:Replacing my Intel 5100 AGN card with a Intel 2200 (X200 Thinkpad)

Not possible. The Intel 5100 is mini PCI-e while the 2200 is just plain mini PCI. Completely different slot.





\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

3 more replies
Relevance 57.4%

Hello , the problem is this: While surfing the web browser, downloading files or other network activity all okay when I go online game ( CS:GO , League of Legends , World of Tanks) ) I start to lost packets ,after that just (Connection problem)and i need to reconnect or restart my ethernet adapter, it does not depend on time, load or from the network server, one time everything is OK and sometimes LAG and dissconected ,cable for direct \ cable from the router, it does not matter , the problem remains.Help please what to do, where to find the problem. Configuration of computer Motherboard : Z97-Pro Gamer , on adapter Intel(R) Ethernet Connection I218-V (last driver from Intel), Win7 Ultimate

btw similar problem has been described here but there is no solution
Ethernet port keeps disconnecting please help
___________________________________________________________________________________________


>ipconfig /all

Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C: \ Users \ AnandaShake> ipconfig / all Setting the IP protocol for Windows
Computer Name. . . . . . . . . : AnandaShake-PC
Primary DNS-suffix. . . . . . : Type node. . . . . . . . . . . . . :
Hybrid IP-routing enabled. . . . : No
WINS-proxy included. . . . . . . : No Connect Ethernet adapter Local Area Networks:
DNS-suffix Connections. . . . . : Description. . . . . . . . . . . . . :
Intel (R) Ethernet Connection (2)... Read more

More replies
Relevance 56.99%

I have found the thread by "Gamer 1238" about Win7 X64 driver for my Wireless card. Its available in Device manager, however Windows shows its disconnected, though I have active Wireless available. I tried to search the wireless network manually, it fails. Its a new card, so its certain that it will not be faulty. I can also assume that as the card is available in Device Manager, the card should be functional. I have gone through the thread "Gamer 1238", and could not find any solution to make my card working. Any help will be highly appriciated. Thanks..

Answer:Ralink RT61 Wireless PCI Card shows Disconnected.

Welcome to Seven Forums,

Have you tried moving the card to a different slot in your Motherboard?

Uninstall then reinstall the driver, I'd recommend finding the latest driver from the manufacturer's site.

You meant manually adding your SSID?
http://www.7tutorials.com/how-connec...eless-networks





Quote:
I tried to search the wireless network manually, it fails

2 more replies
Relevance 56.17%

Hello, I have a connection speed problem, I'm not able to use the full 300Mbit bandwith provided by my D-link DIR8. The maximum speed I get is 130Mbit.D-link said to me that my Wlan card must support the 40Mhz channel width to work at this speed. I already updated the FW to the last one [12.2.*] and I setted up the channel width to auto but still don't work...Does the card support that speed??? You have any suggestion?? Thank you in advance!!Message Edited by impy on 04-04-2009 03:31 AM

Answer:X301 WiFi 5100 very slow

impy wrote:The maximum speed I get is 130Mbit.How exactly are you measuring that? It's quite usual to get a practical throughput which is only about one third of what the wireless technology advertises, so your result looks good.

2 more replies
Relevance 56.17%

Recently, my Intel Wifi 5100 has stopped working on windows. For no appearant reason, Windows decided that my Wifi card is not good enough to be read. When i open my Device Manager, my Ethernet port shows up, but the Wifi card does not. The wierd part is that the Wifi card gets read in "Splashtop" which came on my laptop. I can use Wifi on the Linux bases OS, but not windows. I've tried installing all drivers, but Windows refuses to acknowledge the presence of my card. Any clue on how to fix this?

EDIT: Specs
ASUS G51Vx
Vista HP 64bit
4GB RAM

Answer:Serious Intel Wifi 5100 problem

Hey, welcome to Vista Forums!
Assuming the wireless card is removable, you could try re-seating the wireless card, also, you could take the card out, and boot, then shut down, and put the card back in, then boot and see if it made any difference.

If it's not removable, check to make sure any wireless switches are turned on.

Please post back with what you have tried, or even if you managed to fix the problem and how!
Hope this helps,
Daniel

2 more replies
Relevance 56.17%

I have a Sony Vaio with intel 5100 AGN wireless adapter & Vista OS.

The problem I have is that 9 times out of 10 it will not connect to my home or office wireless network. Eventually it does, though only after switching the adapter on and off several times or rebooting the machine. Sometimes I also have to restart the wireless router.

It will always seem to connect in that I get the connected icon in the notification area (though often without the internet globe symbol) though it will not connect to the net or to any other machine or printer on the network.

Some other useful info:
Both the home and office routers are the same model (Comtrend) and both work fine with other PC's

I often have bluetooth problems also - can take a while for bluetooth to start (I use a bluetooth mouse) and I have 3 unknown bluetooth peripheral devices in device manager

I have McAfee internet security installed

I have tried:
Disabling the firewall
Removing and readding the wireless and bluetooth devices
Disabling IPv6
Driver & OS update
A clean install

Nothing has resoved this issue which is becoming a pain as I can now spend up to half an hour each time trying to connect.

Any help is very much appreciated.

Answer:Wifi connectivity with intel 5100 AGN

Hi -

The Intel 5100 is one of the best wifi's available. I have one in this system and it performs flawlessly.

I think you'll find McAfee to be the problem here. I suggest that you remove it. Download the McAfee Removal Tool (MRT) to your desktop. RIGHT-click on the MRT icon, select "Run as Admin". When it finishes, re-boot.

MRT - http://download.mcafee.com/products/...tches/MCPR.exe

Then reset the Windows Firewall to its default settings -
START | type FirewallSettings.exe into the start search box | click on FirewallSettings.exe above | select the Advanced Tab | click on "Restore Defaults" | Click Apply, OK

Use AVG for a/v if you wish - http://free.avg.com/download-avg-ant...s-free-edition

Make sure that you have the most recent Intel 5100 wifi driver. Go to Intel's site -

http://downloadcenter.intel.com/Prod...ProductID=3062

You can check your system manufacturer's site, but I have found they are ususlly 8-12 months behind.




Regards. . .

jcgriff2

.

2 more replies
Relevance 56.17%

I have a Sony Vaio with intel 5100 AGN wireless adapter & Vista OS.

The problem I have is that 9 times out of 10 it will not connect to my home or office wireless network. Eventually it does, though only after switching the adapter on and off several times or rebooting the machine. Sometimes I also have to restart the wireless router.

It will always seem to connect in that I get the connected icon in the notification area (though often without the internet globe symbol) though it will not connect to the net or to any other machine or printer on the network.

Some other useful info:
Both the home and office routers are the same model (Comtrend) and both work fine with other PC's

I often have bluetooth problems also - can take a while for bluetooth to start (I use a bluetooth mouse) and I have 3 unknown bluetooth peripheral devices in device manager

I have McAfee internet security installed

I have tried:
Disabling the firewall
Removing and readding the wireless and bluetooth devices
Disabling IPv6
Driver & OS update
A clean install

Nothing has resoved this issue which is becoming a pain as I can now spend up to half an hour each time trying to connect.

Any help is very much appreciated.
 

More replies
Relevance 56.17%

Hello! I have a R500 Series ThinkPad with the Intel 5100 AGN WiFi adapter. The driver for the card has been updated as of today (September 7, 2010). I have a D-Link DIR 655 WiFi router (replacing an old Linksys 54g WiFi router). The firmware of the router has also been updated today. I'm running the router under the WPA-2 standard with AES cipher type, channel width of 40 Mhz on 802.11n mode only with auto channel scan (just as Intel is recommanding). I also followed Intel indications for the WiFi card. Problem is : the laptop just can't connect to the WiFi network...? I tried all sort of things, but to no avail. Can anyone help? Note that when I tried  to use the router under WPA with TKIP and AES as cipher type, the laptop was able to connect at the slow 54 Mbps rate. Thanks.

More replies
Relevance 56.17%

I am working on HP Small Form Factor desktop machines (HP Compaq dc7800 Business PC) and have extremely high number of WARNING events with regards to SYSTEM EVENT 27. The source is listed as "e1express". Of course I get the SYSTEM EVENT 33 which re-connects the ethernet. It's happening on 4 identical machines, and not all in the same area.

I have other machines that have a few of the same events, which I think has been normal at the home base, but not near as many.

WORK DONE SO FAR: Updated BIOS and NIC Drivers, Disabled Sleep Status.

This issue with Event 27 NIC disconnect has not been consistent.

One day it appears every 2 minutes. Two days later it appears 20 minutes apart. Then on some days it does not appear at all. Today it is re-appearing after 2 minutes, 5 minutes, 20 minutes, or 25 minutes. Again not consistent.

Even after I cleared out the server-side DNS and WINS entries, those changes did not affect the issue.

Anyone have any other items to check for, either in the XP system or on the network side? Thanks!

PS - We are working in a Win 2003 Server Environment with DNS and DHCP.

Has anyone seen this, and had success by updating the Ethernet Driver, or another way? So far only 1 out of 5 users have complained about the disconnect because it lasted longer.
Manufacturer:
HP

Model#:
DC7800 USFF

PN#:
KA600UT#ABA

Description:
Intel Duo 2 (2.4GHz)
2GBRAM

Event ID #27:

Event Type: Warning
Event Source: e1express
Event Categ... Read more

More replies
Relevance 56.17%

Well as my first post hello everyone.
Well it started only 2 days before getting a sudden connexion abortion from the internet.I tought it may go on for one day but it's still persisting.
Everything on LED of the routeur seems okay but the problem is I install the routeur from the CD and there I can get connected to the internet for a short period.Then after visiting one or 2 websites on the Icone Bar of windows I have that yellow triangle with exclamation.
with this drawing on it
computer--------->networks--------X---------->Internet.
Tried to reset it reinstall it unplug/plug everytime it's same thing.And using a simple dsl modem it's kinda old but it seems to be working a sagem fast 600.
And here I'm posting some information about my config hoping not to have done an error.


----------------------------------------------------
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 4
RAM: 3037 Mb
Graphics Card: Intel(R) G45/G43 Express Chipset, 1294 Mb
Hard Drives: C: Total - 59898 MB, Free - 13753 MB; D: Total - 120691 MB, Free - 10986 MB; E: Total - 124550 MB, Free - 39710 MB;
Motherboard: PEGATRON CORPORATION, 2A94h
Antivirus: avast! Antivirus, Updated and Enabled
-----------------------------------------------------------
----------Result for ipconfig /ALL
------------------... Read more

Answer:Solved: Getting disconnected from a D-Link 2730U after install

16 more replies
Relevance 55.76%

I have Dell inspiron 5520 lap. I paired my new bluetooth headset with the laptop successfully but in the sound options - play back devices its disconnected status. when i tried to connect by right click on it there , observed no action happened. Is there a way to resolve this issue. Is there any problem with the Bluetooth radio (manufacturer -Cambridge Silicon Radio Ltd.) or Bluetooth Enumerator on my computer. checked for those driver software updates, they are already up to date. Please assist. 

More replies
Relevance 55.76%

I have this strange problem that will force me to can my AGP X850PE if i cant get it fixed.

This is not a unique occurance but i didnt make the link until this morning.

The problem i was experiencing would be that if i changed the hardware in my pc, when i turned it back on again it would show the boot screens, then the windows xp loading bar, then the prettier windows xp loading screen (black background with the colored logo) then the screen goes blank. In a good boot it would take a few seconds then my mouse pointer appears and windows loads, but in this case the screen actually goes darker, as if all power is no longer sent to the screen but my monitor doesnt state "no signal". Thats as far as anything gets - i can hear windows xp load in the background but i cant be sure that it gets all the way to end. The only choice is a hard reset which sends me to the safe mode menu after.
Today i accidently overloaded a plug socket elsewhere in my house (not a regular occurence) and when i came to turn my pc on, it did the same thing. From this I think that the problem isnt me removing or changing hardware, but my removing of the power cable from the back of the pc. Its causing some sort of problem with the card settings that arent fixed easily.
The way ive fixed it previously would be to reboot in vga mode. The ati Catalyst Control Centre then tells me i have the wrong driver for the CCC but thats probably cos its loading in vga mode using the windows driver.

I can... Read more

Answer:X850 shows black screen on boot after mains power disconnected

i fixed it this time by disabling the ati avstream in the hardware manager.

any clear ideas would be appreciated.
 

1 more replies
Relevance 55.76%

I have a W500 (i.e. product type 4058), with an Intel 5100 Wifi Link 5100 AGN adapter, running Vista 64 SP2 currently running 802.11G. I want to replace my current router with an "802.11N" but want to know whether my current laptop configuration will enable this change to wireless "N"..Can anyone advise me whether I can:        a) upgrade my router only (i.e. to N)....with the current laptop config ?        b) upgrade my router and upgrade this laptop hardware internally to "N" ?? (is this possible or cost prohibitive ?)        c) or is my only alternative to upgrade the router and purchase a Lan Adapter card for this laptop ??? (Note: I have suspicions that my laptop will NOT allow wireless "N" because after updating the 5100 adapter with the most current driver from Lenovo (i.e. 13.1.1.1, dated 1/13/2020), I find that this drivers' properties only provide wireless a, b, and g protocol choices for selection.....no "N" choice is available.) I am not sure whether this laptop's configuration is not capable of "N" or whether some driver and/or parameter is incorrectly set. Does anyone know for certain????(Incidentally, I have also updated this laptop with all required Microsoft Vista and Lenovo 64 bit SP2 drivers.).Thank you for your help.Regards,drc123

Answer:W500 w/Intel Wifi 5100 AGN compatible w/802.11n ?

Drc123, the Intel 5100 card does support 802.11n at both 2.4 GHz and 5 GHz, but isn't a very strong performer. For more info, see the following FAQ:I've seen websites that mention other Intel WiFi cards -- what about those cards?What is 802.11n WiFi, and why is it any better than the older 802.11b or g WiFi?I have an HP or Lenovo netbook -- can I swap a better WiFi card into it?BUYING AN 802.11N WIRELESS ROUTER - KNOW THE FOLLOWING OR SUFFERIf you're NOT able to use the Intel 5100 card to connect to an 802.11n router that's sitting next to you, then you probably have a driver issue. Good luck!

1 more replies
Relevance 55.76%

I purchased a T400 (which I LOVE so far) but like a fool, didn't opt for the 5300 3x3 WiFi for $15 more... after some post purchase research, I'd much rather have the extra antennae's for picking up those barely in wifi signals around my house.   Does anyone know if the 5300 card can simply be plugged in to replace the 5100?  It all comes down to whether the 3 antennae's are installed on ALL models, with the connectors ununsed when a laptop comes with the 5100.  Anyone know the answer to this? Regards,-Owen

More replies
Relevance 55.76%

My computer is running on Windows 7 Professional 32bit. It has worked fine for the last 2 years. But recently, my wifi card has started me giving me problems. It detects the wireless networks but connects to them only for around 10-15 minutes after which the connection is not even visible in the list. Then after 30-40 minutes, it can connect but the same problem is there.

Also, I tried to make my own ad-hoc connections and saved them. These connections do work and my friends are able to connect to it and the connection remained active for hours. I did it to check whether the Wifi card is working or not. It does work but only with the outgoing connections that are made by my computer. The networks that in range and are giving problem with my wifi card are working fine for my friends. So, I guess it is not the network's problem.

When I tried troubleshooting it, it gave the problem 'Problem with wireless adapter or access point'. I also tried installing all different driver versions and rollbacking to the default version for my wireless card but the same problem is there. Although in device manager, It says the device is working properly.

Please help me in solving this problem. Exact name of WiFi Card in Device Manager- Intel WiFi Link 5100 AGN

Answer:Intel 5100 AGN WiFi Card problem

The same complaints and problems with this 5100AGN adaptor has been around for a long time.

There are countless threads about this on the internet. It seems that disabling the 802.11n Only setting in the routers settings and running in mixed wireless mode can help. Updating the drivers can also help, try the Intel site. > Intel? Driver Update Utility

There are plenty of long threads about this ongoing problem with some possible solutions, so your not alone.

Intel WiFi Link 5100 AGN problem - disconnecting

1 more replies
Relevance 55.76%

Hello Anyone that can help me would be appreciated.  I have a linksys 350N Router which links at N speeds on other equipement I have with N cards.  I purchased this notebook with above noted wifi which is supposed to do N and it only gives me G speed.  I have trouble shot and changed encryption method as recommended on INTEL site yet no luck getting ThinkVantage Access software to recognize n network connection.  I even went so far as to download and try actual INTEL configuration software and still no luck.  HELP any ideas on how to get my notebook communicating with network at N speed? Thanks

More replies
Relevance 55.76%

i just installed windows 10,but came to know that windows 10 does support the wireless adapter in my HP PROBOOK 4510sDescription: Intel(R) WiFi Link 5100 AGNDriver version: 14.2.1.4 so what is the solution HP is  going to provide?

Answer:windows 10 does not support WIFI 5100 AGN adapters

sa11 wrote:i just installed windows 10,but came to know that windows 10 does support the wireless adapter in my HP PROBOOK 4510sDescription: Intel(R) WiFi Link 5100 AGNDriver version: 14.2.1.4 so what is the solution HP is  going to provide?HP only has the drivers that was made at the time the laptop came from the factory with some update only but for Windows 10 AFAIK-that would require you look at intel driver site to see if they have  Win10 listed for your wifi.

4 more replies
Relevance 55.76%

Hi HP forum, I have recently bought HP 15-ac650TU model laptop, I am using Ubuntu 14.04, from the first day I am facing issues with wifi, below are my issues. wifi signal is weak (always shows 2 points)wifi is disconnecting after sometime, reboot is required to connect to wifi againUnable to find other wifi device list only my wifi device is shownwifi is not connected if my laptop is not near to wifi router, only connected when my laptop near to wifi routerPlease advise me to resolve these wifi issues Thanks in advance -Sankar

More replies
Relevance 55.35%

Hi.I am having an annoying problem with my X200.On the right side of the keyboard especially the keys "iopl09'^^" are bending a little bit down when pressed.All other keys are perfectely only said keys have a little flex.How can I fix this?Are there some cables beneath the surface?Is it wise to put some paper between keyboard and Mainboard or frame?













Solved!

Go to Solution.

Answer:X200 keyboard shows a little flex - especially on the right side

Check to see that the screw in that area that holds the keyboard is all the way in.

9 more replies
Relevance 55.35%

a mapped drive shows as disconnected but still work in terms of getting into the shared network folder on our NAS.  but i want to remove it.  the commapnt prompt command wont do it.  you cant disconnected it because it doesnt see a networked
drive.  and i looked in the registry and there isnt a registry entry for the mapped drive. in the mountpoint2 or whatever. 

Answer:Windows 7 mapped network drive. shows as disconnected, cannot remove, not showing in registry

To troubleshoot, disconnect the connection first. Please refer to:
How To Disconnect Non-Mapped UNC Path “Drives” in Windows
http://www.howtogeek.com/howto/16196/how-to-disconnect-non-mapped-unc-path-drives-in-windows/Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

10 more replies
Relevance 54.94%

having trouble getting web pages to come up .when i,m 10 ft from my wireless modem can,t get web pages to come up.i,m connected to the internet.but after a few min,s the connection will fail.when i,m with in 5 ft of modem everthing is good.i have tried shutting of laptop starting up again.it will work sometime times for a few min,s & some other times nothing.i have troubled shooted my internet connection on the network sharing center & it says everthing is good.

Answer:[SOLVED] Can't browse the web - Intel 5100 wifi issue

Hi -

Need to obtain info on your wifi. Make sure wifi is on, then run this app -

http://sysnative.com/0x8/WMIC...._jcgriff2_.exe

2 Notepads will open, one behind the other. Save both as TXT files; zip them up and attach to your next post.

Regards. . .

jcgriff2

`

5 more replies
Relevance 54.94%

Hi,
upgrading from Vista 32 to W7 32, I've lost wifi speed of 300Mbps.
Notebook Vaio AW11Z/B, Router Billion 7402NX draft N, 5100 driver updated with the Intel revision for W7.
The speed is about 130Mbps insted of 300Mbps, but in Vista it was working at 300Mbps.

Any suggestion on that ?

Thanks.

Answer:Intel WIFI 5100 AGN draft N speed lost

  
Quote: Originally Posted by true


Hi,
upgrading from Vista 32 to W7 32, I've lost wifi speed of 300Mbps.
Notebook Vaio AW11Z/B, Router Billion 7402NX draft N, 5100 driver updated with the Intel revision for W7.
The speed is about 130Mbps insted of 300Mbps, but in Vista it was working at 300Mbps.

Any suggestion on that ?

Thanks.


Hi and welcome to sevenforums

either a driver, or IPv6. if you arent using homegroup you should disable IPv6 in sharing and networking.

let us know if you need help with this

en

3 more replies
Relevance 54.53%

I have x220 with Win10 on it (BIOS 1.43). Suddenly I noticed that battery icon is not changed after I disconnected the charger, it still shows charger is connected and battery still charging... But battery of course discharging.I tried to remove the battery and laptop working fine via charger only.It works ok without charger if battery is charged, but icon always shows that laptop is conneted to charger.Also there is no sound when charger disconnected. (Sound is switched on in BIOS)My battery is not new but correctly charging on other X220.

More replies
Relevance 54.53%

Hello everyone,

It is my first thread on this forum and I want to thank you because you indirectly help me so many times.

I just installed new bios 1.25 on my notebook because of usb issues. Everything works fine but suddenly my wifi device stops working on windows 7.
It is well installed, the connection under Control Panel\Network and Internet\Network Connections is enabled, but It doesn't see any WiFi spot.

It is not a device hardware problem because it works under ubuntu.

I tried all the usual ways: reinstall drivers etc but nothing happens.

I don't want to reinstall my OS because I'll have too many settings to restore after.

Is there anyone experiencing the same problem? Anyone who fixed it?

Device: Intel WiFi Link 5100 AGN on Acer Aspire 5738g-644g32mn

Answer:Acer Aspire 5738g WiFi Problem Intel 5100 AGN

Try updating your drivers from here:

Acer Europe - Service & Support, Drivers & Utilities, Downloads
Acer Support - Welcome to Acer Support
Acer Support - Welcome to Acer Support

3 more replies
Relevance 54.53%

i slapped on vista ultimate 32, the intel 5100 will be in device manager without any problems.  the only for me to get the blue led to light up again is to do a uninstall in device manager and reboot.  vista will then detect new hardware and reintall the wifi all over again.  this does work but to do it every week suck.  i dont want to buy a new internal or external card either.  this happen to anyone else?

Answer:Y430 intel 5100, blue wifi led doesn't come on. Not fn + f5 problem either.

To clarify, the wireless works, but the blue LED doesn't and the fix you described only temporarily fixes it?  Have you installed all the other drivers as well; the ones located on the d:/ drive?

5 more replies
Relevance 54.53%

 Dear all,  About 2 years ago i upgraded my win 7 to win 10 version and wirelss stopped working. this problem is well known. Many attempts with netsh id config, reset IP, reinstall drivers, trough a USB whatever, nothing worked. I must conclude that the intel WIFI 5100 driver is incompatible with windows 10. I cannot anymore revert my win 10 upgrade sadly.  My question is whether i can install an older version or another driver type that is compatible on windows 10 ??? if so i would gladly have the driver link or zip file posted  Thanks PS, also my touchpad scrolling feature stopped working, i dont know if this could be related, just in case it could help figuring out where the problem is but i guess its just incompatibility.

More replies
Relevance 54.53%

Hello folks. I have an X61T (7764-CTO) in which the wireless card seems to be failing intermittently. I'd like to replace it with a more modern one, preferably of the 5100, 5300, or 5350 variety. Are there any card w/ these chipsets that are known to work in the X61T? The only card that the Support page lists for this machine is the "ThinkPad abg wireless LAN Mini PCI Express Adapter", FRU 41A4071.  Thanks,Andrew

Answer:5100/5300/5350 Wifi card compatibility with X61 Tablet?

[quote]The only card that the Support page lists for this machine is the "ThinkPad abg wireless LAN Mini PCI Express Adapter", FRU 41A4071.[/quote] I was able to run with an Lenovo branded Intel 4965.  I don't have the fru handy...I would think if it were supported, and if lenovo still sales the device it would be on the accessories & updates page after you insert your model number on the left: http://shop.lenovo.com/us/accessories But since the X61 is replaced by the X200, I don't see a lot of options under wireless & networking anymore. I would also like to know if anyone has had any luck with these lenovo branded wifi/wimax cards in their X61?





--BryanX61 7764-CTO 4G-RAM 1.8GHz Multi-Touch Screen 4695a/g/n

1 more replies
Relevance 54.53%

Hello. We are receiving T400 laptops.  These laptops do not hold a wireless connection for any length of time.  They also have a hard time connecting at boot up.  Item that have been tried...01) Removed and re-installed Drivers.02) Removed and reinstalled Access Connections. (Leap Authorization is used)03) Removed and replaced the Wireless Card. FRU 43Y6943. We are using Windows Xp with SP 2.  The laptop runs fine and we have no complaints with the exception of the wireless.  I might mention that we had the same issue with T61 Models.  To resolve this issue, we removed the B/G/N card and installed B/G cards.  We do not utilize "N" Band, so we do not need this capability.  I was looking for a way to do the same to the T400 Laptops, but I am unable to find a compatible B/G card to use.  The BIOS generates the 1082 error if we attempt to use a card that is not approved for the model.  Any assistance would be appreciated... Thanks. Bob...

Answer:T400 Intel WiFi Card 5100 drops connection.

Have you installed the latest drivers from Intel? The drivers provided by Lenovo, in most cases, may not be the latest ones.





\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

7 more replies
Relevance 54.53%

Hi, I have bought  ES1-311 with Windows 10 recently. After using it for a while, I have observed that the wifi is always got disconnected eventhough I have no problem with my other devices, i.e. phone, tab, etc. I have deleted and reinstalled the wireless driver from Device Manager, but still I faced this problem, and it's really make me piss off with this laptop. Hope that I am not the only one who faced this problem! Any solution from members is really appreciated. Hasway










Solved!
Go to Solution.

Answer:ES1-311 wifi always disconnected

Several places reference the card as a Atheros WB335. Try this driver uninstall the current driver first. If it doesn't work, try the second driver, If you haven't already.Wireless LANAtherosWireless LAN Driver10.0.0.288266.6 MB2014/11/25Download Wireless LANBroadcomWireless LAN Driver6.30.223.250185.4 MB2014/12/19Download     

5 more replies
Relevance 54.53%

Hi,I have been having a problem with my lenovo y50 since yesterday, all of a sudden the WiFi would get disconnected and I will not be able to connect it to it no matter what I tried.The message I get when I try to connect again to the network is "can't connect to this network".This happened yesterday but when I opened my laptop this morning it worked and now having the issue again.My friends are able to connect to the WiFi from their laptops and I can connect tobit from my phone but not my laptop.Has anyone had this problem before? Please help me.

More replies
Relevance 54.53%

I am using lumia 830 mobile and also using whatsapp application in it..
But whenever i use the data using wireless and after the lock screen, i am not getting whatsapp messages. My whatsapp goes disconnect and my wireless won't work after lock screen.
There are no option to use wireless after the phone is locked in wireless settings.
How can i resolve it.??

More replies
Relevance 54.53%
Question: Wifi disconnected

ive got ideapad u310 and wifi on in keeps getting disconnected. especially if it goes to sleep mode. ive got the "always connect" checked but it still keeps on disconnecting. Once it disconnected ive had to reset the wifi adapter to get it connected. does anyone have the same problem? or does anyone know the solution to fix it?

Answer:Wifi disconnected

Hi hfa,
 
please try this WiFi connection fix...
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/wireless-network-will-not-conn...
 
after coming out of sleep it takes about 1 to 2 minutes for the WiFi to re-connect automatically
with all my laptops.
 
Zehn

4 more replies
Relevance 54.53%

Hi, I have bought  ES1-311 with Windows 10 recently. After using it for a while, I have observed that the wifi is always got disconnected eventhough I have no problem with my other devices, i.e. phone, tab, etc. I have deleted and reinstalled the wireless driver from Device Manager, but still I faced this problem, and it's really make me piss off with this laptop. Hope that I am not the only one who faced this problem! Any solution from members is really appreciated. Hasway













Solved!

Go to Solution.

Answer:ES1-311 wifi always disconnected

Several places reference the card as a Atheros WB335. Try this driver uninstall the current driver first. If it doesn't work, try the second driver, If you haven't already.Wireless LANAtherosWireless LAN Driver10.0.0.288266.6 MB2014/11/25Download Wireless LANBroadcomWireless LAN Driver6.30.223.250185.4 MB2014/12/19Download     

5 more replies
Relevance 54.53%

hi!

This problem seem to come out out of nowhere.. I have already turned off my auto update for windows since that was causing me problems BSOD with my drivers before. Now all of a sudden my internet connection seems to stop for some reason while im browsing. Also my Wifi now shows "wifi 2" after I clicked on "diagnose". The connection comes back after my laptop finishes diagnosing itself but sooner or later I get disconnected again, and the cycle goes on.

Thank you in advance.

Answer:WiFi keeps getting disconnected

Please download http://www.crewetown.co.uk/wireless.exe right click run as administrator post result

0 more replies
Relevance 54.53%

I even installed the latest driver from the Lenovo site, and the problem still persists. Any ideas on how to solve this issue?

More replies
Relevance 54.53%

Hi, I have bought  ES1-311 with Windows 10 recently. After using it for a while, I have observed that the wifi is always got disconnected eventhough I have no problem with my other devices, i.e. phone, tab, etc. I have deleted and reinstalled the wireless driver from Device Manager, but still I faced this problem, and it's really make me piss off with this laptop. Hope that I am not the only one who faced this problem! Any solution from members is really appreciated. Hasway










Solved!
Go to Solution.

Answer:ES1-311 wifi always disconnected

Several places reference the card as a Atheros WB335. Try this driver uninstall the current driver first. If it doesn't work, try the second driver, If you haven't already.Wireless LANAtherosWireless LAN Driver10.0.0.288266.6 MB2014/11/25Download Wireless LANBroadcomWireless LAN Driver6.30.223.250185.4 MB2014/12/19Download     

5 more replies
Relevance 54.53%

I have a 1. Year old HP pavilion g6 laptop with AMD APU. since, about a month back, my wifi has been showing problems. The laptop would randomly, at times, disconnect from the wifi and show no wifi networks. Sometimes it would reconnect automatically and at other times it won't. I'd have to either restart or reset the network adapter to get connected again. Also, if I change some router settings like SSID or channel it's broadcasting on or the wifi type (b/g/n) it gets reconnected
I know it is not a problem with my router as I havE other devices on the network and they work fine. I have tried updating and reinstalling all drivers, updated bios, changed the power management settings. I also read that in some network card the Bluetooth causes problems so I even disabled Bluetooth via device manager but still the problem occurs. It doesn't occur frequently but maybe once every 5-6hrs.(no fixed interval, sometimes it happens just after switching on)

Answer:Wifi gets disconnected

Hey Prathamesh
You could try restoring your PC to a point in time where you pc did not do this using system restore and see if this solves your problem.
Thanks
Darktune

3 more replies