Computer Support Forum

Help: X230t " A supported tablet not found on the system" Problem. Its not a tablet anymore

Question: Help: X230t " A supported tablet not found on the system" Problem. Its not a tablet anymore

Greetings, My system is i7 Multitouch X230t. It was working fine from last 2 months till today when while turning my screen from laptop to Tablet configuration the touch and pen function suddenly disappeared. When trying to access the Pen and Tablet setting it gives an error " A supported tablet not found on the system".Also at the same time i noted that in my device manager a USB device is now labeled as Unknown device. I searched the net and tried everything. Restarting. - No effectUninstalling the unknown USB device and restarting - No effectUpdating all lenovo drivers from the lenovo Site - No effect System Recovery to an earlier Date (15 days) - No effect When i Tried to update Lenovo Multitouch/pen driver from lenovo site it give error " A supported tablet not found on the system" and aborts installing the driver. I uninstalled the wacom driver ISDdrivers.exe from windows Uninstall utility and again tried to install Multitouch and pen drivers but again it says " A supported tablet not found on the system". Someone please help. I am afraid it might be a hardware issue as the problem started when i turned the screen from laptop to tablet mode. Currently My X230t is just a Laptop and NOT a TABLET as there is NO touch and NO pen input, as if windows doesn't even recognize any tablet hardware on board. PLEASE HELP. Thankyou

Relevance 100%
Preferred Solution: Help: X230t " A supported tablet not found on the system" Problem. Its not a tablet anymore

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Help: X230t " A supported tablet not found on the system" Problem. Its not a tablet anymore

Perhaps the cable got severed when you were turning it around? I've had a Wifi antenna cable break this way on an HP tablet... If it's still under warranty have them check it and replace it if necessary. It could also be a loose connector but there's no way to be sure without opening the screen assembly.

1 more replies
Relevance 97.15%

Just got this, and did a clean install of Windows 10 Pro. Installed all drivers, nothing funky in Device Manager, but the touchscreen and the pen are not working. Click on Pen Tablet Properties in Control panel and it tells me Supported Tablet Not Found on the System. This is my first time dealing with one of these, and am lost.  Lenovo Thinkpad X220 TabletIntel i7-2640M(2.8GHz)8GB RAM, 250GB Solid State Drive12.5in 1366x768 Multitouch LCDIntel HD GraphicsIntel 802.11agnBluetooth1Gb EthernetUltraNav, Secure Chip,Fingerprint reader, Camera

More replies
Relevance 82.94%

Touchscreen functionality stopped working on a students x220T.  Pen&Touch is enabled in the settings.  I tried to update the driver, but I am getting the message "A supported tablet was not found on this system."  I tried System Restore with no luck, still getting the same error message.  I also ran the Lenovo (ThinkVantage?) System Update with no luck.  Running ChkDsk now, any suggestions?  Should I try swapping out the LCD panel at this point?

Answer:MultiTouch Driver - "A supported tablet was not found on this system"

I am getting same message when trying to install the multitouch drivers. I just installed Windows 8 Pro and this is the only thing not working.  I was previously running the evaluation version of Windows 8 and did not have this problem.

3 more replies
Relevance 81.2%

Hello, Maybe somebody could help me. I just got W700 2757-CTO with Vista x64 SP1 Business, however when I got it I think my Wacom Digitizer worked, but after some time it stopped and I can't get it to work. I tried System Restore, I even performed a Clean Vista Install and even my system is flying now and everything is working much better than before, I still can't get Wacom Digitizer to work  Driver I'm using: 02 Sep 2008 v5.0.8-8 I also tried driver I found online that is 5.1.1-1, but it was the same result. Did anybody face that kind of issue and found a solution? Does anybody have other Vista x64 drivers that I could try? Your help will be highly appreciated.

Answer:W700 - Wacom Digitizer not working: A Supported Tablet was not found on the system.

Guys, If somebody got the original driver that should be in C:\SWTOOLS\... somewhere in Digitizer folder, would you zip and send it to me so I can try the original driver that came with the machine. After clean install I lost all standard drivers. Your help will be highly appreciated.

4 more replies
Relevance 99.22%

I have recently purchased the X230T Convertible Tablet.  I have to say that I love it.  It is just what I wanted.  I am having one issue though.  The display flickers, and squiggly lines appear from time to time for a brief few seconds.  I have searched the internet for this problem and see that I am not the only one that has this issue.  I have adjusted the refresh rate and that was okay at first but now we are back to the flickering, fading in and out.  I've adjusted brightness settings, restored default settings, checked for updates both windows and lenovo.  I'm selfish and don't want to send my laptop off for repair or leave it at a technicians shop for days... Has anyone else experienced this problem? What kind of a fix is there for this?  PLEASE HELP !!!

Answer:X230T - Convertible Tablet Display Problem

I posted this a couple of days ago and haven't had any responses.  I spoke to Lenovo Tech Support this morning.  They said it could be a cable in the computer that is loose and I would have to send it in.  I had done some research online and something triggered when the question was raised about the ultra base.  I had been plugging my power cord into the ultrabase and not into the computer direct.  I wasn't sure that could be a problem, but I decided this morning to plug into the computer directly instead of the base.  I have been using the computer all day and no issues with the flickering display.  I'm going to try it for another 2-3 days and make sure that is fixed.  If so, Lenovo will ship me a new ultra base.  Keep your fingers crossed !!!  

1 more replies
Relevance 95.12%

hi guys, I've spent a ridiculous amount of time trying to fix this to no avail: my computer: lenovo x61 tablet first problem: yellow question mark in "Other Devices" >> "Network Controller" second problem: when i press Fn + F5 (wireless), i get a message saying "No Supported Wireless Adapters (802.11, WAN or Bluetooth) are installed in this system" third problem: no wireless connection icon in network connection folder..i've installed so called adapters, Thinkadvantage access connection, but none of it helped how do i connect wirelessly!!!??? (wired is OK). thanks in advance!

Answer:No Supported Wireless Adapters (802.11, WAN or Bluetooth) are installed in this system - x61 Tablet

Hi jlevin37, and welcome to the Lenovo User Community!
 
Sounds like you're missing some X61 Tablet drivers and software!
 
It's a little hard to tell which ones from your post, but make sure you have the chipset, system interface, network drivers, and power manager drivers installed. You don't need Access Connections unless you have some specific use for it.
 
Don't forget to do both steps of the install: 1. Extract. 2. Install.
 
You could also let ThinkVantage System Update find and install the missing drivers, but I recommend only letting it install or update those things which have value to you.

8 more replies
Relevance 89.79%

Hi all, So after returning previous x230t, I realized it was a dumbest mistake I've ever made, so I purchased a different one and this time I actually got 700$ cheaper compared to if I purchase one from lenovo website, so it was all good. My system come with core i7, 8gb of ram, and I purchase a samsung ssd from amazon, the system boot in less than 8 second, which is awesome. Another thing to notice is that this is the coolest and quietest laptop I've ever had, with core i7, the idle temperature and normal usage only about mid 40 to 50, which is perfect, and even when I play games like diablo 3 or battle field, it goes up to only mid 50 to 60 And the fps is always high, good job HD4000!!!!!!!!!!!!!!!!. the core i7 is very awesome too, I run programs like matlab to set up calculation for my chemistry research and let it run all night with hundred million of loop calculation and the system doesn't seem to slow down at all (of course 8gb of ram helps a lot ) I recommend everyone to purchase this laptop also purchase the ssd, it is really worth it, it make your computer run cool too, the hhd always generate heat  I will purchase the backlit keyboard in the future if I think I need to, for now, everything is so awesome.

Answer:X230t is the most awesome tablet ever

i am waiting on my X230t too. SSD is definitely a high priority area if you want a smooth performer.

9 more replies
Relevance 88.56%

I am getting alerts that one or more devices are not starting on a X230 Tablet. On the X230 Tablet. Microsoft 6to4 adapter.Microsoft INSATAP adaptor # 1, # 2, # 3, # 4, # 5 and # 6.Officejet 4500 G510n-z ( This may be an installation issue)Teredo Tunneling Pseudo-Interface.Officejet 4500 G510n-z (repeated) These devices are reported as "not starting" and are listed as "disabled". On the X230. The card games appear to be malfunctioning. From the time of delivery, FREECELL has been hanging up at the end of the game as the cards begin to cascade down. Regards, chaitraker.  

More replies
Relevance 88.15%

Hi, I've just downgraded my X61 Tablet to Windows XP Tablet from Vista Busines. When i try to install Lenovo System Update i get the following error message"There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your personnel or package vendor. Action StartSuService.EXE, location: C:\Program Files\Lenovo\ ... \startsuservic.exe" Does anyone know what to do about this error? I have tried to:Add the "StartSuService.exe" file from another lenovo tablet, to the System Update directory, aswell as the installers cab files.Aswell as the obvious (rebooting, redownloading, and rerunning the installer). Thank you in advance,Mikkel

More replies
Relevance 87.74%

Hi, I received a x230t barely a couple hours ago, and while updating windows something already went wrong, and now it can't perform the updates anymore since some system file is corrupted. Anyway, the bottomline is, I would like to do a factory reset, I have also tried using this method:http://forums.lenovo.com/t5/ThinkPad-slate-tablets-Knowledge/How-do-I-perform-a-factory-reset-on-my-...but it didn't really work (any of the several times I tried), so maybe it isn't for this model.Does anyone know how I could do?Thanks  Simone 

Answer:How do I perform a factory reset on my x230t tablet pc?

welcome to the community.
 
first, the link you included won't work at all for your X230T.
next, are you able to get booted into windows successfully, or are you already hung up?
- if you can get to a windows desktop, you need to create your factory recovery disk set. the best way is to connect an external optical drive and burn the disk set.
- if you are already hung up, do you have any error messages or codes you can post back?
 
regards.

9 more replies
Relevance 87.74%

Disable trackpoint when the X2xxT is in tablet mode, because slightly heavy pressure when writing in tablet mode would cause the screen to come contact with the trackpoint and thus disabling the stylus. 
 
Can't believe this simply yet detrimental bug has survived this long.
 
Edit (changed title from "lenovo engineers please read this" to improve search relevance for other customers)

Answer:Trackpoint moving while in tablet mode X230T

FinancialWar,
 
Thanks for the feedback - we did this on the Twist, but as far as I'm aware, we haven't needed to do this on other models.   I'm retitling this X230T - which model do you actually have?
 
Your post suggests this is an issue for X200t, X201t, X220t, X230t and so I'd like to understand is this a logical extrapolation as the mechanical design is similar, or if you have personally experienced this symptom on all 4 models?
 
It would be helpful if other customers commented so we can see how common this might be.
 
Which trackpoint nub style are you using on your model? Are all the rubber bumpers still in place on the palmrest ?
 
Mark

1 more replies
Relevance 87.74%

I've seen some other postings about this but haven't found a solution anywhere.  I have a new X230T with Intel Centrino Advanced N 6205 Wireless card and the 2x2 antenna display with webcam.  WiFi works great in laptop mode but as soon as I fold the screen down into tablet mode the wifi signal cuts out.  I can sometimes get it to reconnect but it will drop packets like crazy and is unable to load any web pages.  This behavior happens in both Win 7 & 8.  Pretty sure this is a design flaw or physical defect.  Anyone else having this problem and found a solution? As is it makes the internet completely unusable in tablet mode which is a deal breaker.  This combined with the crappy touchpad is making me strongly consider returning this and getting a Fujitsu which is a shame since I really like the other aspect of the laptop.

Answer:X230T WiFi unusable in tablet mode

Hey there mgrharry,
 
I have found some useful information over on this thread: http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/X230t-Wireless-Issues/td-p/779321. I was uncertain if you had read over it, as you mentioned that you had viewed a few threads before posting. 
 
achim19890 notes "There is also the requirement of the WPA2 security to use the full speed of a wireless n connection (This seems to be specified in the IEEE 802.11n), so make sure you are using this kind of security with your connection to your router." So this may be worthwhile to check on.
 
Additionally, if you will make sure that you Wireless Adapter's driver is up to date. Hopefully this provides some insight and can perhaps alleviate the issues you are having in tablet mode.





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

6 more replies
Relevance 87.74%

Hello. We've got an unusual problem when applying driverpackage for lenovo x201.OSD with SCCM 2007.. The Audio driver installs successfully during OSD (with silent install switch) and in devicemanager we can see that the conexant 20585 Smart Audio HD driver has been installed. Same with "Intel screen audio". But in the Audio options in controlpanel all the fields is grayed out.There is with other words no associated soundcard / standard device. If we install the driver again, logged in as an user the recently grayed out fields in Audio options automagically now shows the correct input / output devices (Conexant audio) and the sound starts working. Is there some issue when installing drivers in SYSTEM context?Notice: There is no "?" in device manager. BR!

More replies
Relevance 86.92%

When my x230 tablet is in tablet mode, the strength of the wifi signal is greatly decreased and packets get dropped left and right resulting in a very poor experience with anything that uses the connection. I have the 3x3 antenna (multitouch) and Centrino Wireless-N 2200 (2x2 BGN) wireless adapter. My driver version is 15.6.1.6 with a date of 2013-02-21.

Answer:x230t: WiFi in tablet mode is very unreliable and slow.

Someone correct me if I'm worng but I beleive that: The antenna on this and most laptops is behind the screen. In Tablet mode the antenna rest between the keyboard and the screen so signal strenght is going to be lower that when you are in laptop mode.

1 more replies
Relevance 86.92%

Hi all,
 
I just stumbled upon this new video..
 
Some may have seen it already, but for those who have not, it perhaps reveal some interesting information.
 

 
Kind Regards
Andreas

Answer:UNBOXED! ThinkPad X230t tablet convertible - video here

I'm not feeling that keyboard. I'm still using the x200t but may need a new one in a year or two. Where is PrtSc, etc.?

9 more replies
Relevance 86.51%

Hi all,    I have a really annoying problem...my x220 tablet disconnects from the internet whenever I enter tablet mode. The internet can be working perfectly fine while in non tablet mode but as soon as I switch to tablet mode, my internet disconnects. And if I switch back to non tablet mode from tablet mode, my internet returns almost instantaneously. I can load a page in non tablet mode with no problems, switch to tablet mode and the page stops loading. If I return back to non tablet mode the page resumes loading without so much as a pause or a hiccup. Also, when I switch the computer to tablet mode, wifi networks disappear off of the "available networks" list that were there before the switch.     I've tried everything, from updating network device drivers, reinstalling network device drivers, running diagnostics, reformatting my computer, uninstalling Norton Antivirus, system restoring to days before the last known working date in normal mode and safe mode, and contacting customer support (chat and call, managed to get a hold of a rep) but none of them have worked.    I also used to have a networking log before I reformatted/system reset to factory settings and there were a ton of errors with words like avsc manager failed to "something" ... I'll reinstall the thinkpad network managing program to create another log. Can someone please help me? My last resort is calling lenovo support again to have tech support come to hel... Read more

Answer:X220 Tablet Internet Tablet Mode Problem

hey kiul676,that's weird, could you check your bios is at 1.24. if it isnt go here and update : http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS018805





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

9 more replies
Relevance 86.51%

Hi I have installed 64bit windows 7 on my machine quite recently in order to utilise the extra ram. When i rotate the screen clockwise to tablet mode, the screen will auto rotate to primary potrait by default and the buttons will work as usual. However, when i swivel my screen anti clockwise to tablet mode, the screen will NEVER auto orientate to primary potrait mode and all the tablet buttons will not work if i rotate the screen ANTI CLOCKWISE. Can anyone help me on this? Thanks alot in advance for the replies

Answer:X200 Tablet rotation and tablet buttons problem

I found another thread in another forum whereby another x200t user has the same problem. http://forum.tabletpcreview.com/showthread.php?t=22541 Hope someone can give advice regarding this. Thank you

2 more replies
Relevance 86.51%

Hi, I have here a X220 Tablet that seem to have a FAN problem.Often in the last days my CPU temperature is often over 90 CAnd the fan has problem to reduce the temperature.I have also situation that the CPU is going too hot and the tablet switch off! With the CPU tool TPFC.62 I can see that the fan speed is 2300-2500 RPMs.But this seams not enough to be. And now the strange thing:When I disable the graphic adapter ?Intel(R) HD Graphics Family? (Driver 8.15.10.2321) and reboot and do the same thing that I done to get the temperature over 90 C with the intel graphic adapter the temperature is not going over 83 C!!! The fan speed is 3500-3800 RPMs. Can someone helps me with this issue?  

Answer:X220 Tablet FAN Problem - temperature over 90 °C - tablet switch off :(

Hi giciorek,
 
I understand that your fan/temperature problems can be frustrating.  I would try updating your BIOS and also updating Power Manager.  (Some on the forum have tried downloading ThinkPad Fan Control, but that is not an official Lenovo solution.)
 
Download Power Manager here:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014924
 
Download BIOS Update here:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS018805
 
In Power Manager, click Advanced at top right, you can Set Optimize Fan Control to Balance All Parameters under Battery Settings.  Set it to Reduce Noise Dynamically under AC.
 
Let me know if this helps.
 
 





Did you find a post awesome? A great response? Kudo them!Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

2 more replies
Relevance 85.69%

Is this an isolated incident ?Many thanks.

More replies
Relevance 85.69%

H Guys, I found it extremely frustrating that I couldn't find this information on Lenovo's website. Battery options for the X230T (tablet version) are different to the X230 (non-tablet version). The battery is a different shape for the tablet version and a totally different battery. In addition, I did not realiase that I can NOT use my existing Series 3 4337 Docking Station with my new tablet. This information is for the Lenovo X230T Tablet Version: Battery Options: 3 Cell Flat Battery (Part No. 0A36316)The Lenovo T230T has the option of a snug fitted 3 cell battery. This battery seems better for if you will use the tablet in portrait mode as the larger battery will sit pround of the bottom and side (see below). However, this battery does not provide anywhere near as much life as the 6 cell battery. 6 Cell 67+ Battery (Part No. 0A36317)OK, this appears to be the one they are raving about, that can give you up to 9 hours of use. However, this battery sSits proud of the unit by about 2cm (approx. 1in) on the side, useful for using as a handle. But it also sits about 1cm (approx. 1/2in) underneath. Very annoying if you want to use your X230T in portrait mode and lay it flat on a desk. Slice 19+ 6 Cell Battery (Part no. 0A36280)Link: http://shop.lenovo.com/us/itemdetails/0A36280/460/2D575BF5CD7E44E58547BFB52CC4F8E9This battery is amazing, it adds only 1Lb. to the weight and can add up to another 9 hours to the battery life. It can support both t... Read more

Answer:Lenovo X230T Tablet Battery & Docking Station Options

Thanks for the post! I think this information will help many people!





Thank you for being a part of the Lenovo Family,Catie--------------------------------------------------------------------------------Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Donate KUDOS and Click "Accepted Solution"

1 more replies
Relevance 84.87%

Has anyone come across a problem with PEN input not being available at boot but becoming available when you disable and re-enable the HID component.  As soon as you shut the machine down and restart PEN input once again unavailable.  Windows event logs contains no error message in relation to hardware or drivers and none of the devices show and issues in device manager.Any help would be appreciated.

More replies
Relevance 80.36%

Like, a actual laptop with a rotating screen to push down. I mean, HP discontinued the touchsmart, and the closest thing I can find (in my price range) is the acer iconia W500, and thats not even the same. Does anyone make a laptop like this anymore?
 

Answer:Does anyone make tablet PCs anymore?

http://blog.laptopmag.com/top-5-tablets-to-buy-avoid
 

5 more replies
Relevance 78.31%

Okay,I'm a stupid dude who doesn't know jack about computers and knows next to nothing about most of the tech lingo on computers.So please.

About last week Thursday Night going into Friday my laptop tablet was able to connect to the internet.Once Friday morning came around,the thing stopped connecting to my wireless adapter.I looked up what to do and tried about as much as i could understand.For example,resetting my computer,restarting the modem by unplugging it then plugging it back in,retyping the password to connect to the wireless connection,switching the wifi button on my tablet off and on,checking to see if dhcp was enabled,and removing the network from the laptops memory & trying to reconnect anew.So far nothing has worked.

Looked up on google what the problem was but having a hard time with what people are saying when they discuss it because it's not in plain man english.

So I need help.
Please and thank you.
 

Answer:Laptop Tablet Will Not Connect to Wireless Anymore

8 more replies
Relevance 78.31%

I bought my graphics tablet (Wacom Bamboo Fun) the other year but a few months ago, it stopped working very couple of days and now it's stopped working altogether. Every time I log on, I get a message saying that the tablet driver needs updating. I did that but I still got the same message so I tried; same result. I tried another time - still the same so I tried to reinstall the software - all I got was a message that said:
"Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item."
It's nothing to do with having an administrator account because it asked for the password when I was reinstalling it; that came up afterwards.
Anyone have ideas on what I can do?

Answer:My graphics tablet/driver isn't working anymore

Temporarily disable your Anti-virus before running the driver installer.
Follow the guide/fix on www.wacom.asia

2 more replies
Relevance 78.31%

Today i have found that my Windows 8 tablet(Acer Iconia W700/I5 Core) won't auto rotate anymore because when i swipe the right bar to get to the sceen(now called brightness) there is no unlock/lock option anymore and i have a switch on my Windows 8 tablet to turn auto rotate on and off and that switch does not work for some reason now and i gone into the display settings and there is no option for auto rotate and now it is stuck in landscape mode. :(
1st i can't do a hard reset on the tablet to default settings(again) and 2nd now i can't auto rotate my tablet because of the options are gone for some bizarre reason, it is sooo annoying!!! :(
I have never had this problem before on my Windows 8 tablet!!
Please can anyone help me how to get auto rotate back?? and What is going wrong with my Windows 8 tablet(Acer Iconia W700/I5 Core), Do i have a virus??

Answer:My Windows 8 tablet can't auto rotate anymore!! :/ HELP!!

Did you manage to find out what's wrong?

1 more replies
Relevance 78.31%

Hello Lenovo community I have a Lenovo X230 t with Windows 7, 64 bit and everything worked properly. Since an update some month ago the Tablet PC Input Panel  (see link) which appears normally as soon as the pen was hold on the screen does not appear anymore. http://blogs.msdn.com/blogfiles/e7/WindowsLiveWriter/InkInputandTablet_12FFC/videof1b202e2ceb0.jpg I have installed all the Wacom drivers I could found but it doesn?t work. Further, I got in touch with Lenovo help line but the couldn?t help me either. I highly appreciate your help. Thanks in advance RegardsMaga 

More replies
Relevance 77.9%

I think I have a faulty X230T, there are now only three tablet buttons and the middle does not do anything. I have installed 7wg737.exe (tablet short menu for Win7), but it does nothing. When I go into Tablet PC setting>buttons, only one button shows up and that's the screen rotation button.  Is there a way to assign the middle button to shortcut menu? Otherwise I'm unable to change brightness or volumn during tablet mode which would make this tablet unusable.

More replies
Relevance 77.49%

Hello, i use a X200T (Vista Business 32bit SP1, all drivers from Lenovo up to date). The standby (save energy) works well in battery- and power-mode. If i use once the X200T in tablet mode (turn screen), the X200T will not go into standby anymore. The screen gets black, but the harddisk is running and running. The only way to use the X200T again is a hardreset. Any idea how to solve this problem ? Regards Matthias 

Answer:X200T : after tablet mode standby does not work anymore

I have the same problem, but it isn't related to just the tablet mode. My problem happens simply resuming from sleep mode, but not every time. Very irritating. Do you have a SSD like me by chance?Message Edited by johnmerb on 02-07-2009 02:15 PMMessage Edited by johnmerb on 02-07-2009 02:15 PM

2 more replies
Relevance 77.49%

Hi all, I have recently upgraded to windows 7 (64bit) and now when I  put my tablet into tablet mode, the screen doesn't autorotate and none of the tablet buttons work. In order to rotate the screen I have to right click on the desktop and choose graphic properties/rotation.Interestingly if I press the tablet buttons while in tablet mode and then rotate the screen up to notepad mode within a few seconds the button will perform its function (rotate screen, activate tablet shortcut menu, etc). Does anyone know how to fix this problem? I've tried running system update (4.0) to no avail. Cheers

More replies
Relevance 77.49%

I have a Tablet drawing monitor, and today the pen stopped working, I fiddled with it for a while, I tried uninstalling the drivers for the Hardware and reinstalling, but then I noticed that the Tablet Settings and Calibration Options you normally see in Control Panel are mysteriously gone. After maybe 2 hrs of googling I've given up,. there's very little on google, and now im considering doing a "Rest This PC." Any help would be appreciated.

More replies
Relevance 77.49%

I have a Tablet drawing monitor, and today the pen stopped working, I fiddled with it for a while, I tried uninstalling the drivers for the Hardware and reinstalling, but then I noticed that the Tablet Settings and Calibration Options you normally see in Control Panel are mysteriously gone. After maybe 2 hrs of googling I've given up,. there's very little on google, and now im considering doing a "Rest This PC." Any help would be appreciated.

More replies
Relevance 77.49%

(I've just tried "preview post" several times and each time it's stripped the whitespace and turned my ten paragraphs into a megaparagraph. I'm going to try pressing "submit new thread" and hope it doesn't do it this time.)

Hello
My Wacom tablet's pen has died and I hope to have a new one arriving in a few days but in the meantime I dug out an old Hanvon Rollick tablet which isn't supported under Windows 10 (which I use) but I nevertheless found some Windows 7 drivers for it which people reported working under Windows 10.

The problem is my PC is trying to behave like a tablet e.g. putting that blue teardrop thing on text boxes on Chrome (I'm not sure of its correct name) and when I try to ctrl-click a link, it shows a little "ctrl" label under the cursor and won't open the link in a new tab like it's supposed to and just does it in the same tab.

It takes multiple tries to right-click and open a link and when I hover over the link the cursor keeps rapidly flashing between the arrow and finger icons.

It is very difficult to click minimise, restore or close on Chrome because hovering over them doesn't make them go red and clicking on them doesn't tend to make them do anything unless you try many, many times.It's being profoundly irritating in programs other than Chrome too but those are some examples.

I was used to old my Wacom (Volito 2) trying to do tablet-like things but stopped it doing bubbles with gpedit's "turn off pen feedbac... Read more

More replies
Relevance 77.49%

I have a projector that I use to project things from my computer, but I have no way to show a drawing process.

More replies
Relevance 77.49%

Tablet PC Settings not showing in Control Panel Although Tablet PC Components enabled in Programs & Features.
I have tried System Restore, re-enabling Tablet Components...

More replies
Relevance 77.08%

When I use the X220 as a laptop I can duplicate the display through my SmartBoard projector but when I use it as a tablet and it is docked I have to turn the tablet and dock 180 degrees so I am not writing upside down on the smartboard;  that means the dock has the cables coming out the front.  I can undock and plug everything into the X220 but the beauty of the dock is that I don't have to!

More replies
Relevance 77.08%

I think iBall Slide i701 is the cheapest tablet in world (windows) even cheaper than Lumia 430.
http://www.amazon.in/gp/product/B00XVGQ0WM/ref=s9_simh_gw_p147_d1_i1?pf_rd_m=A1VBAL9TL5WCBF&pf_rd_s=desktop-1&pf_rd_r=1QHP7BJT33XWDP2N4NQG&pf_rd_t=36701&pf_rd_p=577130167&pf_rd_i=desktop
Only USD 77$
But i have some questions before i proceed to buy it for my child
1. As it is 16gb tablet but in actual we get only 4gb free space & i have read in reviews that once we update windows & other apps we are left with only 400mb space & we cant install other apps. So is it possible to install software's (.exe) on 64GB memory card which this tablet support ?
I am not talking about APPS, I am talking about .exe files like photoshop, ERP, educational softwares etc.
2. As it is having only 1 USB port so it is possible to attach a USB hub so that we can attach pen drives, KB, Mouse, HDD, 3g Dongel & power adapter at once ?
If anyone of you have used any windows 8/8.1 tablet then please reply.

More replies
Relevance 77.08%

I have a Cherry Mobile Alpha Morph that works without problems aside from the fact that, when I undock it from the keyboard, it doesn't detect that it should now be in Tablet Mode. I have to manually go to the Action Center and toggle it there. Same with docking it back. I have already checked my settings and I didn't disable Tablet Mode either.

Anyone have an idea how I can resolve this? I just want to seamlessly dock and undock the tablet and it should switch to tablet or desktop mode respectively.

I don't know if it's relevant but the OS is Windows 10 Home Single Language.

Answer:Tablet mode doesn't get engaged when I undock my Windows tablet?

I would like to know how to enable this as well - In fact, I was hoping to be prompted to change modes when dock/undocking....instead of having to find the setting and toggle tablet mode on/off every time.

2 more replies
Relevance 77.08%

After a fatal error in my windows, I had to reinitialize my windows 10. After I did so by the windows original tools, the windows became completely stable, but all tablet features are lost. Even thinkvantage cannot recognize many features and hardwares do not work. What should I do?

More replies
Relevance 77.08%

I have a desktop that runs Windows 8.1. My x220 tablet runs Windows 7. I was thinking about getting a wacom bamboo tablet for my art in photoshop (which I make on my desktop... x220 isn't powerful enough for what I do in photoshop). Then I realized that my x220 tablet is kind of the same thing. Is there anyway I can connect my tablet to my desktop so that when I'm using photoshop, I can use the stylus on the tablet to control what I do? Many thanks in advance.

Answer:Connecting x220 tablet to a desktop to use it like a wacom tablet with stylus

AFAIK, not easily:http://www.ersatzhaderach.com/blog/2013/02/02/turn-an-old-penabled-tablet-pc-into-a-networkable-art-...

2 more replies
Relevance 77.08%

Hi. Recently, I have noticed that wifi connection in Tablet mode in my Thinkpad X230 Tablet is significantly slower than in laptop mode. Sometimes, it completely disconnected to the network. I tried to test with Speedtest. net and download a file via Internet Download manager. Both show that laptop mode has significantly higher and better speed connection than does laptop mode.  Does anyone have the same experience as me? Is the antena has any problem??? Thank you. I 

Answer:wifi connection on tablet mode - Thinkpad X230 Tablet

which model wifi card do you have? intel 6205, 6300 or ThinkPad 1x1 or 2x2.

3 more replies
Relevance 77.08%

The latest bios update of X1 Tablet (Model:20GG) breaks the sleep (or hibernation) function. I found the tablet sometimes cannot be waken up by pressing the power button after entering connected standby. The version of the flawed BIOS is1.68-1.21 (N1LUJ30W) After rolling the embedded controller version back to 1.20 (N1LUJ29W), the problem no longer exists.

More replies
Relevance 77.08%

hi guys i really want to try a windows 8 tablet and i plan to buy it either by the end of this month or by next January. I am confused on what to pick though
First of all, the reason why I want a windows 8 tablet IS because i like the interface. but more importantly, i need metatrader and cTrader in legacy app as im a full time forex trader. I have metatrader in my iphone but you cant seriously compare that with the windows version (no tabbing, no lines drawing, no fibonacci, etc.). cTrader doesnt even exist there.
im looking to replace my macbook pro (which btw i also installed windows 8 on it through parallels virtual desktop) with a windows 8 tablet to support my trading while im outside
So basically I dont need a super i7 tablet or something. However, im curious to know how windows 8 atom tablets perform. I have seen enough reviews and some people says atom tablets perform badly in legacy apps. Question is, how bad is that bad? Does it lag so bad even though i dont need to run heavy apps like adobe? I only need to run these trading apps which btw are very light. You can compare them with MS paint i believe, just with constant connection.
would it do well in atom tablets? I dont want lags when i switch from win8 native apps to metatrader and cTrader.
next question - how does windows 8 tablet on-screen keyboard work with legacy apps? Would i have special gesture to show up the on-screen keyboard or it automatically appears when i touch the screen? I personally dont believe ... Read more

Answer:Help Me Choose My Tablet - Thinkpad Tablet 2, Vivotab, Acer W700, Etc.

I forgot to add one more question. how responsive legacy apps (desktop mode) is to your finger? Do i really need a pen or it doesnt help either? Because acer w700 doesnt come with a pen so it's also a crucial question for me

20 more replies
Relevance 77.08%

I am currently on a Dell Venue 11 5130 with a Bay Trail Atom Z3770 and 2GB ram. While it serves the purpose of my usage of office suites and web browsing, I could use a little faster tablet. It would stutter if I have more than 5 tabs open on Edge. But there is nothing wrong with this tablet with a plenty of battery life and nothing broken after using if for close to 4 years now.
I am looking at a Dell Latitude 11 5175 tablet with a Core M3 and 4GB of ram. Is this upgrade worth it? Or should I save some more money to get the Core M5 version for around $150 more? My usage is office word, and youtube.

More replies
Relevance 76.67%

Configuration:X220 Tablet, Core i7, 320GB HDD, Added 128GB MyDigital SSD. Background:When I first installed the MyDigital 128GB mSata SSD, it installed and worked like a charm (Yesterday - 3/18/2011). I installed Windows 7 on it and it was working great. However, the computer then went into hibernate and when it woke up, it reverted to my HDD and after that point I haven't been able to boot back into the SSD. Other symptoms:* At first, the computer showed the drive properly as an SSD drive, however, now BIOS and everything else simply show it as PS3016S5.* Windows disk management utility show only 2MB on the disk. What I've tried so far:* Opened the laptop back up to make sure the drive is still connected properly.* Tried installing Firmware update S5FAM012 (from mydigital), but running the command with /SCANPORT simply said it could not find any valid SATA drive.* Tried installing firmware S5FAM015 (from mydigital), but the UI keeps showing me the error message: "Failed!!! Not Running on Flash Normal Code now!! - FBO" Has anyone else run into this issue? I'm stuck not being able to use my 128gb SSD at all. 

More replies
Relevance 76.26%

I have a wierd problem - I have six X61 Tablets, all with XP SP3.  One of them gets the BSOD on every boot during the XP Logo scroll.  This occurs on both its original drive and if I put in an HDD which works fine in another chassis.  Note that it will copy (clone) that disk fine if I follow normal protocol using Acronis True Image Home 2010 CD (on the ultrabase with either CD or DVD) - it clones USB drive to HDD fine, then that HDD works fine in another chassis, but gives the same BSOD when I try to run it in this chassis.  I am pulling my hair out trying to figure what is different, as I am unaware of any setup or BIOS changes.  Any ideas?  Could a bad CMOS battery cause this?  I have yet to try a new HDD setup from Lenovo disk set, but that is my next try.  I hoped to get insight here first, though.  Thanks in advance. Joe Holzer

Answer:X61 Tablet BSOD with XP SP3 using same drive that works fine in another X61 Tablet

hey ideaman911,let me get this straight ...X61 Tablet (Shoddy) + original HDD = BSODX61 Tablet (Good) + original HDD = PerfectX61 Tablet (Shoddy) + HDD (from X61 Tablet(Good)) = BSODX61 Tablet (Good) + HDD (from X61 Tablet (Shoddy) ) = ??is all the unit at bios version 1.25 ?





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

2 more replies
Relevance 76.26%
Relevance 76.26%

plz help
i have lenovo thinkpad 2 tablet it was not running well so i decided to reset it ...
but after 1 hr,it says "WINDOWS INSTALLATION FAILED PLEASE RESTART THE INSTALLATION"
and it keeps on repeating the same thing...
please help me ....

Answer:PERFORMED TABLET RESET now UNABLE to START TABLET

If it is still under warranty, call Lenovo. IF you tried to reset to factory defaults, and it is still failing, then you have something else that is going bad. My suspicion would be memory as that is what happened to me although it was on a desktop. Something to check...good luck.

1 more replies
Relevance 76.26%

Hi I've looked at every category in the drivers matrix and absolutely cannot find the drivers that control the Tablet buttons on my tablet screen,  Can anyone point me to a link???  I found another thread on this forum that talks about a similar issue and someone posted a link to beta drivers, but the link doesn't go beyond the main Support home page at Lenovo.  Thanks, -G

Answer:X200 Thinkpad Tablet - Tablet buttons drivers NA???

Hey there Cr0sschex77,
 
To get some clarification to better direct you, what operating system are you currently using? Additionally are you referring to physical buttons or "buttons" on the touchscreen once at the desktop? Thanks Cr0sschex77!





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

1 more replies
Relevance 76.26%

hello all, i would like to set the three Tablet Buttons (the ones on the 'display' half of the notebook) to Shift, Ctrl and Alt, so i can use photoshop  also in 'tablet' mode of the notebook. the ctrl and alt keys were OK to set up, but it doesn't recognize the Shift key in the setup dialog. is there any known workaround?thanks for any reply.

Answer:x200 tablet & setting Shift to one of the Tablet Buttons

Try checking if the SHIFT key is actually one of the items on the drop down menu in the tablet pc button settings.





http://vanhavirta.fi/

2 more replies
Relevance 76.26%

Well, I've finally had it. I've had my 6365 CTO X60 tablet pc for over a year now and last Monday I lost pen functionality in tablet pc mode in the afternoon after working fine in the morning. It works fine, even now after rotating the screen back to laptop mode. As soon as the screen is rotated back to tablet pc mode, no pen functionality but the mouse still works fine so I know it's functional in laptop mode but rotate back, all ok!  I did uninstall the Wacom drivers, restart, and then downloaded the tablet pc, windows xp version drivers from the wacom.com site as instructed in a previous post. Unfortunately, the digitizer pen is still disabled in tablet pc mode and works fine when rotated back to laptop mode. I've called Lenovo tech support in Atlanta four times now and they've been totally useless. I wiped out my X60 tablet last Friday and used Rescue and Recovery to reinstall the operating system back to it's factory settings. I went back and unistalled and reinstalled the Wacom driver. Nothing. Since that didn't work either I've requested the box to ship this back to the Memphis Depot. Hopefully, I'll just get a new replacement machine that works but I'm so angry and frustrated w/ Lenovo's support because it's obvious that the people on the phone are not tech specialists and they couldn't even point me in a direction to get this fixed. It's cost me over a week now wo... Read more

Answer:X60 tablet pc digitizer pen functionality disabled in tablet pc mode

Problem solved! While the support folks weren't able to fix the problem over the phone, they did overnite me a prepaid return box which I sent back that day. Two days later they overnited my X60 tablet back fixed with a note saying 'LCD enabled'. I'm impressed how quickly they got my tablet pc back up and running. I'm glad I got that 3-yr. support warranty because I usually opt out of those things. This totally paid for itself. I just wish I hadn't been so reluctant to send back my laptop because I do need it for work and I figured I wouldn't get it back for at least a week or longer. I was so frustrated and pessimistic that I forgot sometimes these problems do get fixed in a very satisfactory manner. It's too bad the initial steps that led to sending it back were so painful. Bottom line: Lenovo fixed my pc quickly, no questions asked. Thanks!

1 more replies
Relevance 76.26%

I have upgraded to Windows 8 64 bit on my X61 Tablet, however I cannot get the tablet buttons, hotkeys, or auto-rotation to work. My understanding is that Lenovo has stopped supporting these products. I think it is a shame to stop using a perfectly working tablet PC with a superior LCD. I don't want to go back to Win 7 leaving all kinds of nice features on Windows 8. Any suggestions? Is there a hope? Koray

Answer:X61 Tablet Windows 8 - Tablet Button and Features Request

Hi koray,
 
I've been playing around with Windows 8 since the developers preview.  I've ran it on a lot of older systems.  Getting things to work will require some experimentation on your part.  
 
You can start with your Driver Matrix.  There you can find the Hotkeys Utility for Windows 8.  You will also need the Power Manager Driver for Windows 8.  Not Power Manager,  just the Power Manager Driver.  
 
Run Windows Update, it will probably find some stuff.  Some Windows 7 drivers will work, others won't.  
 
I'm running Windows 8 Pro on an x60 tablet and everything works fine.  I also have it on an x61 non-tablet and it runs fine. I had to do a lot of messing around with stuff to get them to work right though. 
 
Just make sure that you set system restore points before changing anything so you can get back what you had before, just in case something doesn't work right.  And, only install one thing at a time and reboot and test it out thoroughly before you install something else.  
 
Good luck with this,
 
Dave 

1 more replies
Relevance 76.26%

Does anyone know if there is a program available (free if possible) similar to Quicken (Deluxe) that I could use on my Android Tablet(HP 10 Tablet G2 -2301)? That would keep track of bank accounts and interest earned, and keep track of one stock IRA and interest earned and yearly RMD? And produce reports for that interest earned, etc.? Mainly for using when preparing yearly tax forms.
 

Answer:Quicken alternative for Android Tablet(HP 10 Tablet G2 -2301

Have you looked at Mint.com?
 

2 more replies
Relevance 76.26%

I'm new to the Tablet community but excited to venture into it.  My workplace provided me with an X201 Tablet type 2985 model C5U.  The pen works great but I can emulate any of the finger/touch demos.  Is this not supported with my type or model?  Or do I need a special driver.  When I open the tablet PC settings, I'm given the option to identify my screen as PEN or TOUCH.  While I select TOUCH, no finger combination (one or two) that presses my screen will invoke anything.  I was hoping this would be a touch solutoin albeit more powerful than the iPad.  Appreciate your responses everyone. Thank you. L

Answer:X201 Tablet Tablet MultiTouch Support (Newbie)

welcome to the forum!
 
the 2985-C5U model has a pen-only outdoor-viewable display.   it does not support touch input.

3 more replies
Relevance 76.26%

So the DV port on my asus eee pc 1005peb is failing, and got the idea from android central to look into tablet and tablet hybrids. I kind of like the idea of having a hybrid for both the netbook kind of experience combined with a tablet experience. I'm having trouble discovering what my brands and model options are for that type of device. I'm concerned from what little I have seen so far I'm going to be against a cost prohibitive wall compared to spending $100 to have the port replaced. I'm one to figure if I'm going to toss that kind of cash into a repair I might as well consider replacing it with something else instead of doing the repair.
For my desktop PC I hesitant on going to windows 8 because of a lot of negative stuff I've heard but at the same time I hear good stuff about it too. But when it comes to a portable device like my netbook and a tablet. I think hm windows 8 (not RT) sounds like it would be a good fit since it is designed for both traditional mouse and keyboard input and touchscreen input. Plus I would like to retain the software I use on my netbook to use on whatever replaces it. Something I can't do with my current HP touchpad with webOS and android (CM9) on it. I tried using both as a replacement for my netbook but in the end there were just too many things I didn't like about that. I let my dad take my netbook out of town with him for about 2 month and was trying to use the touchpad as a replacement. I was glad to have my netbook back to use it again.
... Read more

Answer:shopping for netbook replacement with tablet or tablet hybrid

Sounds like you have a pretty good idea of what you are looking for. What would be the price range you are looking at?

6 more replies
Relevance 76.26%

I just bought my Yoga 2 13, when I flip it to Tablet mode, the screen turns off. Apparently it goes to sleep. When I open it it turns on again. Do I need to do any adjustments? or is this a defect?

Answer:Yoga 2 13 Tablet Screen turns off when in Tablet Mode

Try updating your drivers first: http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/yoga-series/yoga-2-13-notebook-l...If that does not help, try a factory reset:1. Turn off your Yoga 2 132. Press the tiny button next to the power button on the right3. Follow instructions to perform a factory resetIf none of the above attempts have helped you, it is probably a hardware issue.

1 more replies
Relevance 76.26%

The bay trail tablets come with office 2013 preinstalled, I cracked my asus t100 and wanted to move office to my new dell venue 11 pro core i3 version. I downloaded office and it got to the point where it needed to check if any other computers are using the license. So of course with it being activated on the asus it didn't let me. So is there anyway of deactivating it from the asus and transferring it to the dell or is the office version "special" that came with the bay trail tablets?

Answer:Possible to transfer microsoft office from bay trail tablet to new tablet?

Uninstall it on the T100?
Sent from my Z10 using Tapatalk

11 more replies
Relevance 76.26%

Has anyone run into the problem where there is no audio on an X61 tablet even though SoundMax drivers are shown to be installed properly?  Any help would be appreciated. Thx

Answer:No audio on X61 tablet running Window XP Tablet Edition

I have the same issue right now on an X60 tablet that I just upgraded to Vista Ultimate.  All of my drivers are up to date, except it shows on windows update that I have an audio driver still to update.  I go through the process, and then it will not install the update.  I wish I could help with this more, but wanted to let you know that others have similar problems. I hope someone can help us.B 

1 more replies
Relevance 76.26%

I have a new X220 Tablet, and the Pen and Tablet functions work perfectly out of the box as long as the unit is on the Ultrabase. As soon as I remove from the Ultrabase (or boot while not connected), the Pen & Tablet functions stop working. Conversely, if I dock the X220, the Pen & Tablet functions begin working again. The behavior is the same regardless of whether I have an external monitor attached or not. Any thoughts?

More replies
Relevance 76.26%

Hi people!, Im pretty sure this topic has been discussed before but im still having trouble making it work. When in tablet mode jabbing any of the buttons doesnt do anything, however when i switch back to normal laptop mode the buttons that i pressed start taking effect (screen rotate, tablet toolbox) . ive tried reinstalling windows and all the drivers i would be great to get this working again! Ive got a X61t with the following installed:-Windows 7-ISD tablet 7.1.0-9-Tablet button driver 4.04-tablet shortcut 6.33 any help is appreciated thanks!

Answer:tablet buttons dont work in tablet mode

download thinkvantage system update, it should load all the missing drivers for you.

2 more replies
Relevance 76.26%

Hi,
I'm going to be doing some presentations and teaching online. I'm using Team Viewer 9 running on Windows 7 as my software. I would like to be able to have the equivalent to a whiteboard visible to the participants.
For a demonstration of the sort of thing I want to do see
click here
where the presenter draws circles etc. He doesn't do any handwriting in the YouTube video (but he does in the actual presentation at CBT nuggets)
I'm total newbie when it comes to tablets, but a tablet that allows drawing direct on the tablet and simultaneous display on a Windows monitor. I know that the presentation on You Tube was done with various Wacom devices. Intuos4, Cintiq monitor, or more recently, Cintiq Companion tablet. (I tweeted the presenter Shawn Powers). These devices are a bit beyond my budget. Is there a cheaper alternative? Sadly the Microsoft Surface Pro 2 is not yest available in Australia (where I am) - I'm not sure if it's a possible answer, but I'm assuming it would be. Is there anything else that's not going to mean I have to take out a mortgage on my house?
Thanks in advance for your help.
cheers,
Bernard

Answer:Drawing on a tablet with simultaneous display on the tablet and a Windows PC

I assume you mean you want to use an app on a standard tablet such as a Nexus 7 or IPad and stream the tablet screen content to a monitor or TV?
Maybe something like this is needed

3 more replies
Relevance 76.26%

I have upgraded my X201 Tablet to Windows 10 32bit. As far as I can tell, everything is working, including the WACOM drivers and touchscreen.  Wireless has worked perfectly so far, not sure about Bluetooth as I don't use it. My only issue is that the buttons on the display do not work. The power button located on the display does work. I tried installing the Tablet Button Driver II and it will go through the install but the buttons do not work.  This is the download link:http://support.lenovo.com/us/en/downloads/ds027627 The document claims Windows 10 compatability and was Last Updated :08 Jun 2015. On inspection, all the files extracted are dated from 2012 and when trying to manually run the software Windows throws up an error that the software is not supported on this PC.   I removed and reinstalled and noted that the driver information page when running the installer does NOT have Windows 10 listed as a supported system. My assumption is that the driver that they have linked on the download page is NOT the most current driver and is infact the driver for Windows 7 from 2012. Does anyone know how to contact Lenovo to get the correct driver posted to the page, or know of an alternate source to try and find it?

Answer:X201 Tablet Windows 10 Tablet buttons not working

hi, I can't help you with your question, sorry! Gooed to hear everything else is working fine on your system. Can you tell me what to do to get the x201 tablet's touchscreen to work!? I will have a clean windows 10 install. Where do i get the (right) drivers (windows, Wacom?) Thanx!Carlo

1 more replies
Relevance 76.26%

Hey all, I have a weird problem.  My tablet buttons have stopped working-- but only in tablet mode.  That is, I can't rotate, or bring up the tablet shortcuts, or move around the screen in tablet mode.  Also autorotate doesn't work.  But if I switch out of tablet mode, I can do all of these things just fine (except for autorotate). Also, when I switch into tablet mode the screen doesnt rotate or anything, but when I switch out of tablet mode the screen rotates to the direction I defined in the settings (sometimes.. to be honest it seems pretty random to me).  I am running 32 bit vista w/ 4 gb ram on an x61 tablet with the latest drivers.  I have uninstalled the tablet button drivers and the lenovo system interface and reinstalled them already.. I have the latest APS. Help me out here.. I have no idea why this isn't working!  Don't make me have to reinstall vista to get the buttons working.. Tha'ts ridiculous!!  Arrrgh.

Answer:Tablet buttons stop working in tablet mode only

sano88 wrote:Also autorotate doesn't work.  But if I switch out of tablet mode, I can do all of these things just fine (except for autorotate).You haven't calibrated it yet and enabled it yet. You have to get into Tablet shortcut menu setting and do it all first. For the rest, uninstalled all ThinkPad Tablet Button Driver, ThinkPad Tablet shortcut menu then restar and reinstall vis System Update. Just let it find for you; that's the only thing I could recommend for this case.

8 more replies
Relevance 75.85%

Saturday when I launched the store it said an update was needed and looked like it was trying to download. Then the window just went away. I launched it again and all I get is the blue store window with the rotating dots. After about 15 to 20 minutes in this state the window just disappears again. The same thing is happening in windows update. The row of dots just move at the top of the page but nothing ever comes back.
Anyone else having this issue?

Answer:Why won't my Windows 10 Store on Build 10240 for desktop/tablet load anymore?

I had a simler problem computer did the update restarted but then just wouldn't load the update so it undue the changes went back to its previous state I tried to rest it using the tool in recovery but then it wouldn't boot..Had to do a clean install using the iso i creating from the build 10240 update but it wouldn't activate.. to get to activate i had to reinstall win 8.1 the do an upgrade from that..

2 more replies
Relevance 75.03%

I have been using my lynx tablet very happily for several weeks but I am a bit worried about how frequently I get the message above. It seems unrelated to what I am running. Sometimes it happens when I just have a browser open, other  times when I am running programs that use more resources.It has happened when I am working with the USB charger connected because the battery is not fully charged.Other than the message there doesn't seem to be any problem when this happens. Performance is good, programs keep running, including things like video streaming.The tablet doesn't seem to have a problem taking a charge when it is in sleep or off but I have noticed the charging progress is close to zero when I am using the machine.All of this is without a dock  and I have not yet updated to Windows 8.1.My question is whether this is an indication of a problem I should be concerned with. So far it has just been a  minor annoyance.Any advice will be much appreciated. I would hate to  cause a problem on my lynx by ignoring it.

More replies
Relevance 75.03%

So I purchased my Tablet with XP Tablet OS downgrade (it was suppose to come with Vista, but I choose to have XP tablet instead). So my Laptop gets shipped in a speedy manner, I open the laptop up and there is a Vista sticker on it.  Luckily XP tablet  was installed on the laptop. However, on the bottom of my laptop is a Vista Business Product Key  . . .  Where is my XP Tablet 2003 product key? What if I wanted to do an OS refresh of XP Tablet without using the ThinkVantage software/bootup? What if my HD fails and I need to replace it? Does ThinkVantage offer to burn a cd/create an image or install of the Fresh XP OS install like Dell does? I know it offers to burn a recovery disk, but is that recovery disk just a restore point of the PC, or an actual OS installation. I really would like to be able to avoid the dependancy of ThinkVantage software on the hidden partition for restore and recovery. Also I guess whenever I'm ready to use Vista, how would I go about installing Vista? Is there another selection for creating a "Vista recovery disc"?Message Edited by tonefour on 08-26-2008 09:55 AM

Answer:X61 Tablet XP Tablet OS Product Key? OS refresh concerns!

I feel the same way as you. Last laptop crashed, and the recovery partition/MBR went too. The company wanted me to pay for recovery discs. I couldn't believe it. Anyway, I only have a partial answer for you unfortunately. I have Vista Business installed so you'll have to ask Lenovo about the XP part. I just spoke with Tech Support for though and they showed me where the option to Create Recovery Media was:Start-->All Programs-->ThinkVantage-->Create Recovery Media Follow the wizard and good luck, it worked for me.  We shall see if it actually works when the moment of truth comes. Best 

3 more replies
Relevance 75.03%

The learning curve on this machine is steep if you want to take advantage of all the input options but I've put the time in and I'm starting to love it. There is one thing I wish Lenovo would address though. I see plenty of ThinkPad users with this problem going back to at least 2008, and no solutions forthcoming. The manual states: "On the display bezel near the screen is a row of buttons with which you can control your computer in the tablet mode, without the use of the keyboard."By default the buttons are set to turn your computer off, press CTRL+ALT+DEL, or rotate the screen 90 degrees. The manual goes on to describe how you can customize these buttons via the Tablet Shorcut Menu, which is accessed via Start > Programs > Lenovo ThinkVantage Tools > Tablet Utility.If you open this program you get a dialog box titled "Auto Screen Rotation Settings." This dialog controls what orientation the screen should switch to when you convert into tablet. So it really doesn't have anything to do with the buttons.The only dialog that allows any assignment of the tablet buttons is Windows Control Panel > Tablet PC Settings. Here the Buttons tab is supposed to list the actual buttons on the front panel and let you assign them, but the only one shown is the Screen Rotation button. This works fine, you can set the button's function for a single press and a long press. (Too bad it's not possible to use Shift by itself, but that is as-designed by MS.)It should go without sayi... Read more

More replies
Relevance 75.03%

X61 Tablet what OS better&faster XP tablet  or Vista Business. RAM 4Gb.

Answer:X61 Tablet what OS better&faster XP tablet or Vista Business???

I can say that XP is simply faster, but Vista is just much better as far as Tablet functionality is concerned.

1 more replies
Relevance 75.03%

Hi, Happy New Year. I replaced my old harddrive with a new one and I just installed windows xp tablet 2005 (not supplied from lenovo or ibm) on the new HD. Now it seems that a lot of drivers are missing. Like bluetooth, keyboard, wireless... The drivers are available to download from ibm's website, But I have to install 20+ drivers one by one. That is too much. After installing xp, my windows desktop showed no icons except for recycle bin (I believe this is due to drivers missing also). Anybody know is there a x60 tablet driver bundle/package cd image somewhere? How did you guys change your os to xp on a new HD? Thanks!

Answer:Installing XP tablet 2005 to X60 Tablet new harddrive

Why not let System Update do the work for you? You will need to have installed the MS .NET Framework 2.0 beforehand, instructions can be found on the site, and then let it loose.

3 more replies
Relevance 75.03%

My X41 (1867-CTO) Tablet will not go into Tablet Mode.  Also ThinkVantage System Update has 2 updates that keep downloading and installing but just keep appearing.The stylus does not do anything either.













Solved!

Go to Solution.

Answer:Lenovo X41 Tablet - Tablet Mode Not working

You mean it doesn't change screen orientation when turn to tablet mode, right? If so, I have that problem too!! and no one helps us so far. http://forums.lenovo.com/lnv/board/message?board.id=X_Series_Tablet_ThinkPads&thread.id=4013

6 more replies
Relevance 75.03%

I downloaded the 'driver' on the gateway website:
http://support.gateway.com/support/d...&uid=263185599

after downloading & Extracting the file. a 'read-me' file pops up.

it reads:

=============================
Overview

This document describes the steps necessary to install the Tablet PC button drivers for the notebook computer models listed in the Applicable Part Numbers section below.
Installation

1. From the Start menu, right-click Computer, and then click Manage.

2. In the User Account Control dialog box, click Continue.

3. In the left pane, click Device Manager.

4. In Device Manager, click the plus sign (+) next to Human Interface Devices.

5. Click Tablet PC Buttons, and then from the Action menu, click Update Driver Software.

6. The Hardware Update Wizard displays. Click Browse my computer for driver software.

7. In the Update Driver Software dialog box, type or browse to the C:\Cabs\D20113-002-001 folder. Click Next.

8. Open the D20113-002-001 folder and confirm the selection of the qttabbtn.inf file. Click Open.

9. Follow all onscreen instructions to complete the installation.
=======================

I get stuck at step number 5.. I do not have a 'Tablet PC buttons'!! (this is the reason why I need to download it..).. it seems to me this 'driver download' is actually an update for the driver. and not the driver its self.?

I downloaded other drivers from them, for my computer and they all worked great.. they all had easy 'install... Read more

Answer:Gateway Tablet PC, I need the 'Tablet Buttons driver'

Brittni-

After opening the qttabbtn.inf file (installation script), I found these alternative names for "Tablet PC Buttons." Try finding one of these names in the Device Manager:
"Quanta Computer Inc."

"Quanta Computer Tablet PC Buttons HID Driver"

10 more replies
Relevance 75.03%

I just went about searching the web to find out if an X60/X61 Tablet pen fits in an X41 Tablet (as in, stores properly in the pen slot - it will definitely work on the X41 Tablet screen) and couldn't find the answer on any of the popular forums. So, I pinged some Lenovians to find the answer.





-----------------------------------Tim SupplesLenovo Social MediaGot a question? Don't PM me, post it on the forum!Lenovo BlogsX60 Tablet SXGA+ primary, Z61p fully loaded workhorse









Solved!

Go to Solution.

Answer:Does X60/X61 Tablet pen fit in X41 Tablet and vice versa? *SOLVED*

The answer is that the X41 Tablet pen fits in the X60/X61 Tablet slot, but the X60/X61 Tablet pen does not fit in the X41 Tablet slot. Now you know, and knowing is half the battle.





-----------------------------------Tim SupplesLenovo Social MediaGot a question? Don't PM me, post it on the forum!Lenovo BlogsX60 Tablet SXGA+ primary, Z61p fully loaded workhorse

1 more replies
Relevance 74.21%

I'm trying to use Microsoft OneNote 2010 for a 64-bit but it keeps telling me that the Tablet driver was not found and needs to be download. I just simply can't seem to find the update I need. Please help! 

Answer:Tablet driver not found

Welcome to the community!
 
Please tell us which tablet model you're using and which 64bit OS?
 
Cheers.

6 more replies
Relevance 74.21%

Alright, so I recently bought a Wacom Tablet off ebay, slightly used but hasn't been touched in the last three years or so. I just got it yesterday (shipped from australia), and it doesn't work. I installed the correct driver for it off wacom.com, I installed the painter program that came with it (though I'm sure that has nothing to do with the problem), I plugged the thing into my computer, I have all the parts, but when I click on "Wacom Properties" in my control panel, a box pops up saying "A supported tablet was not found on the system." and only one option, and that's to press "Ok" and move on. Now, the only thing that I'm scratching my head about is the AC Adapter that came with it. The prongs (?) are set up different from what would normally fit into the sockets in my house. I'm guessing they're different because it came from Australia, but then I don't know where to even plug the OTHER end of it into. There's nowhere it'd fit on the actual tablet, and I don't know if it's supposed to plug into my computer or what.

Anyways, if anyone could help with this problem, I'd be eternally grateful. Also, I'm wondering if anyone else has had a problem similar to this?

Thanks. Oh, and I hope I posted this in the right folder... I didn't really know where to go, lol
 

Answer:Wacom Tablet not found?

11 more replies
Relevance 73.39%

Wacom cintiq 12wx driver will not load
I have hp pavillion a730n
a few times it did "magically" work but after restarting/turning off and on it did not anymore
pen will move cursor but more like an mouse and very strangely
 

More replies
Relevance 73.39%

I have downloaded and installed the latest driver for my Intuos3 Graphics Tablet and it works until I reboot, then it does not work.
Checking the Wacom Tablet Properties in the Control Panel, I'm advised that the "Tablet Driver was not Found".
What am I doing wrong?
It worked just fine in XP!

Answer:Wacom Tablet Driver Not Found

Try updating your drivers from here:

Dell - Drivers and Downloads

9 more replies
Relevance 73.39%

Hey everyone,
Not trying to sound like a salesman, but wanted to let you all know that if you are looking for a Windows tablet, I just got one that is very inexpensive and outperforms more expensive ones. I tried like 3 other budget tablets before this and they were no comparison... CHUWI HiBook 10.1 .. I left the amazon link at the bottom. Less than $210 when I got it the other day... it's:
Windows 10 / Android 5.1 Dual boot
Intel Cherry Trail Z8300
4GB RAM
64GB eMMC Storage + MicroSC card expansion
USB-C
mini HDMI
1920x1080 OGS IPS display
It's built really well, and from what I can make out it's as powerful or moreso than the Surface 3!!
Hope this helps some, it really is a nice tablet for $209 .. below is the link... http://www.amazon.com/HiBook-Windows...wpcentral00-20

Answer:Looking for a great cheap tablet? I found one!

Atom x7-Z8700 mush better than x5-Z8300 so it cannot be faster.
Lets wait for month or two and hear back from you again :)
These Chinese tablets have too many problems

6 more replies
Relevance 72.16%

Hi! and sorry for my bad English, If any one knows it is possible to replace the X61 tablet motherboard with X61(no tablet) motherboard?

Answer:X61 tablet motherboard replacement with X61(no tablet)

don't think they are cross compatible when i last checked. 

1 more replies
Relevance 72.16%

Random question, I know. Anyone know the answer?
 

Answer:Will Windows XP Tablet Edition run on a non-tablet PC?

mrfettucini said:





Random question, I know. Anyone know the answer?Click to expand...

If anyone is interested, the answer is yes.
 

1 more replies
Relevance 72.16%

I wanted to give my impressions of the Lenovo TPT2. First off, the model I have is the 3679-27U, this means that it has the digitizer pen, windows 8 pro, no NFC, no 3G/4G antenna (though there is a slot for a SIM card). Let me also be frank about my biases concerning tablets. I am not a voracious media consumer. If Im going to watch a movie or TV program I prefer to do so with a large screen TV in the comfort of my living room. As far as checking email, messaging, twitter, and facebook that is why I have a smartphone. Why do I need another piece of electronic equipment that does the exact same thing as my smartphone? In my opinion iPADs and Android tablets are really only good for media consumption, they give you a slightly larger screen to run the same apps that your phone runs. If Im going to buy a tablet it has to provide some functionality that my phone or laptop cannot, otherwise it is a waste of money. Therefore, a tablet had to be able to run productivity programs: MS Office, Photoshop, Illustrator, GB-Stats, etc That meant a tablet using either the Atom processor or a Core processor (i3, i5). This left out not only Apple and Android but also any tablets running Windows 8 RT. Obviously one the major advantages of a tablet is its size and portability. My laptop is a comfortable size and fairly easy to carry around, so what advantage would a tablet give me. The answer is battery life. In order to be practical I would need a laptop with a significantly longer run time tha... Read more

Answer:The Lenovo Thinkpad Tablet 2: Everything a tablet should be

Nice review. I have had my TPT2 for a little over a month now. I have used it extensively as my only device away from the office and have been able to do so without adjusting my computing needs too much. The only drawback that I have had is an under-powered USB port where i am unable to attach my external hard drive. Anything that I knew I was going to need for the day or trip I load onto a USB stick and problem averted.
Edit: I suppose I should mention that my usage is not too intense in terms of productivity. My programs of choice are typically the Microsoft Office package. I do a lot with excel, word, and power point and so far, I haven't run into any issues. I'm in the process of getting a new monitor for home and i'll have a better idea what it's like running a multiple monitor setup from the TPT2 and mini HDMI to HDMI connection. At this point I have a BT keyboard and Mouse which I have been using for the past few days with no issues (except when the battery is close to dying in the keyboard and it behaves as if it is possessed).
I might be one of the lucky ones but haven't had any issues with the wifi signal, sleep issues others have experienced, etc. Outside of the USB and mini HDMI to VGA issues, I'm still completely satisfied. If Wacom could update the drivers to enhance the accuracy of pen input, then I'd be completely satisfied given my particular usage patterns.

13 more replies
Relevance 72.16%

Is it possible to use a Tablet PC Pen on the display screen (13.3" Toshiba True Brite(r) WXGA TFT High Brightness) of my Satellite U400-137. I have some pre-loaded SW for Tablet PC (I Ignore if it was supplied with Windows Vista or some additional complimentary SW supplied by Toshiba with my Note book).
In case that it is impossible to use the pen on the screen does exist some external screen / display by Toshib to connect to my notebook, which coul support Tablet PC SW?

Answer:Satellite U400-137; Tablet PC Pen - Tablet PC

I doubt you can use a pen, even if the laptop has touchscreen capability.

The Tablet PC laptops have an extra digitizer layer inside the screen to sense pen input, so you would need to have a Tablet PC model like the Portege M750 or M780.

3 more replies
Relevance 72.16%

Hi there, I hope someone can answer me a little querstion. I recently bought a x61 tablet and am really happy with it. Although I could be much happier If someone could help me with the following problem. I use Photoshop often, very often and for that reason I use the shift key a lot. In order for me to use it in tablet mode however I always have ot open the lid enough for my hand. I tried to map the tablet pc buttons in the control panel but it doesn't let me. I can map ctrl and alt and all of those but not shift.Is there some secret way to map the shift key? Or do I have to use some loophole and remap one of my normal keys. I hope someone can help me or at least tell me there is no way to do it. It would be greatly appretiated. Thanks in advance Pix (Short for Phoenix )

Answer:x61 tablet - How to map Shift key to tablet buttons?

I don't really have a direct solution for this since I want to customize them as Ctrl, Shift, all kind of this as well. However, there is a workaround that I found it's really good. What you have to have is "Mouse"  wired or wireless doesn't matter. Though I do recommend you to use wireless and Logitech as a brand. The reason why I recommend Logitech is because they have real nice SetPoint program which allows you to customize every buttons on your mouse. Then just map one of them as "shift" It works perfectly.. One hand with pen and another on mouse. I think Razer and Microsoft are another brand I know which have this feature in their software.

9 more replies
Relevance 72.16%

Got a tablet PC, but we lost the original system disc that came with it. Can I simply put WinXP Pro on it or do I have to put Tablet Edition on it?
 

Answer:Tablet Edition required for Tablet

6 more replies
Relevance 72.16%

Hi I have just updated an old laptop with Windows 8 (Microsoft has a great offer right now = it is only a great offer if it works ;-) )The PC is a: Lenovo ThinkPad X61 tablet 7767.But I am having issues with the tablet interface. Windows 8 has been designed to tablets...With the virgin installation, the tablet interface does not respond.The tablet is found in the Device Manager:+ Human Interface DevicesHDI-compliant device (3 lines)Wacom Penable Dual TouchAll control programs are in place, calibration program can be opened, but there is no response from the tablet (pen or touch). I have looked at the lenovo support site, and downloaded various drivers, most with no effect, others caused windows blue screen - which in windows 8 is more light-blue greenish.I have also Installed ISD_DualTouch_710-9 from Wacom.eu, this gives the most positive result.Both pen and touch works (no dual touch), but is unaligned (when in a corner, pointer is 2cm from corner x and y. center of screen is aligned)I cannot calibrate, neither pen nor touch. Running tabcal (from control pannel or commandline) gives 4 popup windows with error messages:1) Failet to enumerate the installed digitiser devices.2) No suitable hardware was found to calibrate.\nWindows supports calibrating only integrated digitisers.3) Invalid display was specified.The Device manager lists the tablet as working:+ Human Interface DevicesHID-compliant deviceWacom DeviceI have tried to find a file holding the calibration; I found a ISD... Read more

Answer:X61 Tablet with Windows 8 - no tablet function

check this topic

3 more replies
Relevance 72.16%

Hi allI need some help, the pen is working when i uses the X61 whwn the scereen is in the "normal position". But when i try to use it i tablett position don't work ??OS is WinThx for help 

More replies
Relevance 72.16%

 Last week I woke up my X60 from sleep mode like usual and was greeted with a nice "Unknown device found" message. I found that my tablet pen does not write, no buttons on the monitor work and the status lights on the monitor do not work (the charging, battery light and sleep light do not turn on). I have tried several driver upgrades from the website, but none seem to do the trick. I am trying to avoid reformatting to get them to work again, but if that's what it takes... Any suggestions? Running Vista Buisness. 

Answer:X60 Tablet uninstalled tablet driver, help!

Welcome to the [email protected]!  Please contact the help desk about this.  The error that you are seeing is typically related to a bad digitizer.  This is not something that you can replace, as it is attached to the LCD.  They should let you send it in and they will repair this for you.  

1 more replies
Relevance 72.16%

Hello,

I was recently gifted the Wacom Intuos Pen & Touch tablet. Whenever I attempt to install the device, the installation finishes, the driver is downloaded and installed, and the software is in my system. The computer recognizes the device and the cursor tracks relative to my stylus' position over the tablet.

The problem is when I go into the settings to configure the device, I get an error that says "TABLET DRIVER WAS NOT FOUND". Because I cannot access the settings, I can't make any changes to tracking, sensitivity, and more. It's very problematic.

I've spoken with Wacom about this issue. This is what we have tried:Restarting its local Service
Stopping and Starting its local Service
Uninstalling all drivers and software and installing it again
Trying legacy drivers
Creating a new User account and attempting the installation again

When these solutions did not help, the conclusion was that my system either had a virus or my security program was too sensitive. I am using BitDefender Total Security 2015 and have Windows Defender and Windows Firewall disabled.

I spoke with a BitDefender tech support representative and we tried the following:Installing with On-Access Scanning turned off
Installing with Active Virus Control turned off
Installing with Firewall turned off

Nothing has succeeded.

Whatever the cause is, something is preventing this driver from either taking or being recognized.

At this point, I don't know what is ca... Read more

Answer:Table Driver was not Found, Wacom Tablet on Windows 7

I am having the exact same problem, and have been trying to troubleshoot it for the past few days. I have contacted Wacom about my case but they have yet to get back to me.

In the meantime, I tried all of what you mentioned:

Restarting its local Service
Stopping and Starting its local Service
Uninstalling all drivers and software and installing it again
Trying legacy drivers
Creating a new User account and attempting the installation again
This particular PC has had an Intuos3 and a Cintiq 12WX installed in the past, so addition to those, I also tried digging deep into my Registry Files (saved a backup beforehand) and removing any instances of Wacom, and also removing any instances of Wacom from my User AppData folders.

This has not worked, but my thinking right now is that this is one of two problems:
1. There are drivers buried deep into my OS that not even Windows Add/Remove Programs can get rid of, interfering with the Intuos Pro driver, or
2. (the one I'm leaning towards) Windows is simply not detecting the correct driver and Windows Update is obtaining an incorrect driver, or some generic tablet driver that allows it to at least function. Which results in it being useable, but the pen detection is sporadic and there is zero pressure sensitivity, and attempting to open Wacom Tablet Properties consistently results in the error "THE TABLET DRIVER WAS NOT FOUND."

The reason I say this is because even when I install straight from the disc, or through t... Read more

2 more replies
Relevance 72.16%

It seems to me that by default, the image path for files associated with the Tablet PC Input Panel in 64-bit Vista are wrong.

Using Autoruns, the entries for Tablet PC show "file not found", with the path pointing to the Program Files (x86) folder, as such:

"File not found: C:\Program Files (x86)\Common Files\microsoft shared\ink\TipBand.dll"

In fact, TipBand.dll is located in the Program Files folder:

C:\Program Files\Common Files\microsoft shared\ink\TipBand.dll

I noticed this problem in trying to resolve an issue with my Wacom tablet. I wanted to correct the path to see what happens, but I haven't found any incorrect entries in the registry.

Any ideas?

Edit: I just realized these errors are under shell extensions. Nevermind!

Another edit: Even InputPersonalization.exe shows "file not found", but it's running perfectly, so it's probably a bug with Autoruns.
 

More replies
Relevance 69.7%

Hi,. the particular model of my x200 is 7453-FJ9. I bought it from ebay and the seller claimed is was multi-touch. After checking on the Levono support page where you identify the machine features through the model # above, it does not mention anything about being touch capable let alone multitouch. However, since I installed a new copy of windows 7 pro 64-bit on a new hdd, after installing all of the automated lenovo and windows updates, I checked the system properties and it states 'Pen and Single Touch Input Available' as shown in my system properties screen below.
 
Link to picture
 
I have tried to use the single touch input but it does not seem to be working. I have tried calibrating touch input though the screen calibration and it has not worked. I have looked at the HCI devices in the device manager and it shows 'Wacom Penabled MiniDriver','Bluetooth Remote Control', 'HID Compliant Consumer Control Device' and several repeated entries of 'HID-compliant device' but nothing about touch input ! 
 
I don't understand what is going on, do you think this tablet has touch input available ? Should I try install the touch driver on the lenovo website ? the wacom website ? or am i just wasting my time thinking it has touch input since it is not mentioned on the 7453-FJ9 lenovo support page (that I can see). Any advice on this would be kindly appreciated..
 
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules




... Read more

Answer:x200 tablet : does my tablet feature pen AND single touch input or just pen input ?

http://support.lenovo.com/en_US/product-and-parts/partsLookup.page
 
Type in the first 4 digits of the model number and then the serial number of your machine.
 
Make a note of the Pt# of the display and the description and I'll see if I can get the specifications for your display.
 
Dave

5 more replies
Relevance 69.7%

I'm trying to configure our x200 tablets for use with Windows 7 and bitlocker.  However, after installing windows 7, I keep running into a problem where windows doesn't see the TPM.  It is enabled and active in BIOS.   Device manager doesn't show the security devices category, nor are any devices in an error status or unidentified.   I've got to be missing something incredibly simple here, as I have one tablet that it is working on.  (Set up a couple of months back, so I don't know what I did differently) Thanks for your help -- Steve  

More replies
Relevance 68.47%

After entering the wrong admin password, i had an error message System Disabled.  The tablet is now not turning off and not going to any other screen . please help asapthank you

Answer:Hp TABLEt. SYSTEM Disabled

Hi, Do you receive a 'halt code' after 3 incorrect entries?  If you do, post back with this code. Regards, DP-K

1 more replies