Computer Support Forum

X61 Tablet BSOD with XP SP3 using same drive that works fine in another X61 Tablet

Question: X61 Tablet BSOD with XP SP3 using same drive that works fine in another X61 Tablet

I have a wierd problem - I have six X61 Tablets, all with XP SP3. One of them gets the BSOD on every boot during the XP Logo scroll. This occurs on both its original drive and if I put in an HDD which works fine in another chassis. Note that it will copy (clone) that disk fine if I follow normal protocol using Acronis True Image Home 2010 CD (on the ultrabase with either CD or DVD) - it clones USB drive to HDD fine, then that HDD works fine in another chassis, but gives the same BSOD when I try to run it in this chassis. I am pulling my hair out trying to figure what is different, as I am unaware of any setup or BIOS changes. Any ideas? Could a bad CMOS battery cause this? I have yet to try a new HDD setup from Lenovo disk set, but that is my next try. I hoped to get insight here first, though. Thanks in advance. Joe Holzer

Relevance 100%
Preferred Solution: X61 Tablet BSOD with XP SP3 using same drive that works fine in another X61 Tablet

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: X61 Tablet BSOD with XP SP3 using same drive that works fine in another X61 Tablet

hey ideaman911,let me get this straight ...X61 Tablet (Shoddy) + original HDD = BSODX61 Tablet (Good) + original HDD = PerfectX61 Tablet (Shoddy) + HDD (from X61 Tablet(Good)) = BSODX61 Tablet (Good) + HDD (from X61 Tablet (Shoddy) ) = ??is all the unit at bios version 1.25 ?





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

2 more replies
Relevance 102.5%

Since a couple of weeks I 'm having a problem with the pen on my x60 tablet (type 6364) and XP.The pen does not move the pointer when hovering / touching the tablet. Only when pressing the button the mouse pointer would move to the location pointed. Stangely enough the eraser works fine.As I suspected a problem with the pen, I tried a colleague's pen and that has the same problem - not only on my PC but the same issue is on his PC with his and my pen. I already tried un- and re-installing  the hardware from the systems panel , installing the latest drivers from wacom 5.05-7 RC but without success.Any other ideas  ?Thanks

More replies
Relevance 79.13%

Hey,
 
Recently I've been having some issues with lag regarding open pages .I use firefox but even chrome and opera is the same. I'll be using facebook,twitch, youtube as examples.
Whenever I try to open these, there is quite abit of delay before opening the page. Speedtest even lags opening yet shows low ping and 5mbps which is what I expected on wireless.
However, when I try to open the exact same pages on the same type of browser on my phone, tablet, old PC using wireless, the pages do open instantly and do not delay.
 
I've tried a complete history/cache/cookie wipe yet the issue persists. Youtube videos are a hit or miss where I can either play it or forever be unable to play it. I'm not sure if that is relevant but this issue is the same for my other pc but not of the mobiles.
My PC has been always placed in the same place but this lag appeared out of nowhere so I'm thinking of a possible infection because the issue is odd and limited to just this PC rather than the internet which the other mobiles/pc use.
Thank you for any advice posted!

Answer:Internet issues yet tablet,old pc, phone is fine?

Please download Junkware Removal Tool and save it on your desktop.
 
Shut down your anti-virus, anti-spyware, and firewall software now to avoid potential conflicts.
Run the tool by double-clicking it. If you are using Windows Vista or Windows 7, right-click it and select Run as administrator.
The tool will open and start scanning your system.
Please be patient as this can take a while to complete depending on your system's specifications.
On completion, a log is saved to your desktop and will automatically open.
Please attach the JRT log.

Please download AdwCleaner by Xplode onto your desktop.Close all open programs and internet browsers.
Double click on adwcleaner.exe to run the tool.
Click on Scan button.
When the scan has finished click on Clean button.
Your computer will be rebooted automatically. A text file will open after the restart.
Please post the contents of that logfile with your next reply.
You can find the logfile at C:\AdwCleaner[S1].txt as well.

Please download MINITOOLBOX and run it.
Checkmark following boxes:
Flush DNS
Reset FF proxy Settings
Reset Ie Proxy Settings
Report IE Proxy Settings
Report FF Proxy Settings
List content of Hosts
List IP configuration
List Winsock Entries
List last 10 Event Viewer log
List Installed Programs
List Users, Partitions and Memory size
List Devices (problems only)
Click Go and post the result.     

6 more replies
Relevance 79.13%

This has been happening and just realized now that it is not my ISP (comcast). I pay for a 75 mbps plan and usually get around 80. All of the sudden a few months ago my internet went to ****. Like 8 mbps and under. I have heard of the AMD QuickStream but i have nothing amd and already tried to find it.. Nothing... Any help?

Specs:
CPU: Intel i7 4790K @4.00Ghz
GPU: Zotac AMP! Extreme 4gb
RAM: 16GB Hyperx Fury Black
Mother Board: MSI Z97 Gaming 5
PSU: Corsair RM750 750 watt
HDD: Western Digital Blue 1TB
SSD: Kingston SSDNow V300 120GB
OS: Windows 10

 

Answer:Internet slow only on this PC fine on everything else (phone, tablet, etc...)

Welcome to PCHF. Let's take a look at a bit of information from your machine, so I can get the ball rolling on solving your issue.

Please download MINITOOLBOX and run it.

Checkmark following boxes:

Flush DNS
Reset FF proxy Settings
Reset Ie Proxy Settings
Report IE Proxy Settings
Report FF Proxy Settings
List content of Hosts
List IP configuration
List Winsock Entries
List last 10 Event Viewer log
List Installed Programs
List Users, Partitions and Memory size
List Devices (problems only)

Click Go post the result.

Download Autoruns and Autorunsc Unzip it to your desktop and then double click autoruns.exe
After the scan is finished then click on File>>>>>>>>>>>Save
The default name will be autoruns.arn make sure to save it as Autoruns.txt under the file type option.
in other words make sure it is a .txt file instead of .arn Attach the text in your next reply.
 

15 more replies
Relevance 79.13%

I want to install a game on my tablet. the game is on a disc. I don't have a disc drive on my tablet. how can I install the game without a drive?

Answer:install a game into my tablet from a disc without a disc drive in my tablet

What OS?  Is the game written for that OS?When you say the game is on a disc, what kind of disc?  Do you mean it's on an optical disc such as a CD/DVD?If the tablet is a Windows tablet, and you have a Windows game that is on a CD/DVD, then you should be able get an external optical drive that will plug into the USB port on the tablet.  You'll then be able to install the game to your tablet.  You'll most likely need an external drive with it's own power supply since often the USB port on a tablet can't provide enough power to power an external drive.If you have a desktop or laptop PC with an optical drive then you could share that drive over a network and install to your tablet from the shared drive. 

1 more replies
Relevance 79.13%

I want to install a game on my tablet. the game is on a disc. I don't have a disc drive on my tablet. how can I install the game without a drive?

More replies
Relevance 79.13%

Hi there, My name is Jeen วิธีแทงบอลสเต็ปI want to install a game on my tablet. the game is on a disc. I don't have a disc drive on my tablet. how can I install the game without a drive?

More replies
Relevance 78.31%

Just bought Asus VivoTab RT TF600T & it will not get on internet. It did great for 2 days & now nothing will open in the apps

Answer:New Asus Windows RT Tablet worked fine only for 1st 2 days

What sort of network are you using? If there are any other computers on the network, can they get online? What exactly happens when you try to get to your homepage from Internet Explorer?Always pop back and let us know the outcome - thanks

2 more replies
Relevance 77.49%

Just got this, and did a clean install of Windows 10 Pro. Installed all drivers, nothing funky in Device Manager, but the touchscreen and the pen are not working. Click on Pen Tablet Properties in Control panel and it tells me Supported Tablet Not Found on the System. This is my first time dealing with one of these, and am lost.  Lenovo Thinkpad X220 TabletIntel i7-2640M(2.8GHz)8GB RAM, 250GB Solid State Drive12.5in 1366x768 Multitouch LCDIntel HD GraphicsIntel 802.11agnBluetooth1Gb EthernetUltraNav, Secure Chip,Fingerprint reader, Camera

More replies
Relevance 77.49%

Hi all, I have recently upgraded to windows 7 (64bit) and now when I  put my tablet into tablet mode, the screen doesn't autorotate and none of the tablet buttons work. In order to rotate the screen I have to right click on the desktop and choose graphic properties/rotation.Interestingly if I press the tablet buttons while in tablet mode and then rotate the screen up to notepad mode within a few seconds the button will perform its function (rotate screen, activate tablet shortcut menu, etc). Does anyone know how to fix this problem? I've tried running system update (4.0) to no avail. Cheers

More replies
Relevance 77.49%

Hello. We've got an unusual problem when applying driverpackage for lenovo x201.OSD with SCCM 2007.. The Audio driver installs successfully during OSD (with silent install switch) and in devicemanager we can see that the conexant 20585 Smart Audio HD driver has been installed. Same with "Intel screen audio". But in the Audio options in controlpanel all the fields is grayed out.There is with other words no associated soundcard / standard device. If we install the driver again, logged in as an user the recently grayed out fields in Audio options automagically now shows the correct input / output devices (Conexant audio) and the sound starts working. Is there some issue when installing drivers in SYSTEM context?Notice: There is no "?" in device manager. BR!

More replies
Relevance 77.49%

I have a Tablet drawing monitor, and today the pen stopped working, I fiddled with it for a while, I tried uninstalling the drivers for the Hardware and reinstalling, but then I noticed that the Tablet Settings and Calibration Options you normally see in Control Panel are mysteriously gone. After maybe 2 hrs of googling I've given up,. there's very little on google, and now im considering doing a "Rest This PC." Any help would be appreciated.

More replies
Relevance 77.49%

I have a Tablet drawing monitor, and today the pen stopped working, I fiddled with it for a while, I tried uninstalling the drivers for the Hardware and reinstalling, but then I noticed that the Tablet Settings and Calibration Options you normally see in Control Panel are mysteriously gone. After maybe 2 hrs of googling I've given up,. there's very little on google, and now im considering doing a "Rest This PC." Any help would be appreciated.

More replies
Relevance 77.49%

(I've just tried "preview post" several times and each time it's stripped the whitespace and turned my ten paragraphs into a megaparagraph. I'm going to try pressing "submit new thread" and hope it doesn't do it this time.)

Hello
My Wacom tablet's pen has died and I hope to have a new one arriving in a few days but in the meantime I dug out an old Hanvon Rollick tablet which isn't supported under Windows 10 (which I use) but I nevertheless found some Windows 7 drivers for it which people reported working under Windows 10.

The problem is my PC is trying to behave like a tablet e.g. putting that blue teardrop thing on text boxes on Chrome (I'm not sure of its correct name) and when I try to ctrl-click a link, it shows a little "ctrl" label under the cursor and won't open the link in a new tab like it's supposed to and just does it in the same tab.

It takes multiple tries to right-click and open a link and when I hover over the link the cursor keeps rapidly flashing between the arrow and finger icons.

It is very difficult to click minimise, restore or close on Chrome because hovering over them doesn't make them go red and clicking on them doesn't tend to make them do anything unless you try many, many times.It's being profoundly irritating in programs other than Chrome too but those are some examples.

I was used to old my Wacom (Volito 2) trying to do tablet-like things but stopped it doing bubbles with gpedit's "turn off pen feedbac... Read more

More replies
Relevance 77.49%

I have a projector that I use to project things from my computer, but I have no way to show a drawing process.

More replies
Relevance 77.49%

Greetings, My system is i7 Multitouch X230t. It was working fine from last 2 months till today when while turning my screen from laptop to Tablet configuration the touch and pen function suddenly disappeared. When trying to access the Pen and Tablet setting it gives an error " A supported tablet not found on the system".Also at the same time i noted that in my device manager a USB device is now labeled as Unknown device. I searched the net and tried everything.  Restarting. - No effectUninstalling the unknown USB device and restarting - No effectUpdating all lenovo drivers from the lenovo Site - No effect System Recovery to an earlier Date (15 days) - No effect When i Tried to update Lenovo Multitouch/pen driver from lenovo site it give error " A supported tablet not found on the system" and aborts installing the driver. I uninstalled the wacom driver ISDdrivers.exe from windows Uninstall utility and again tried to install Multitouch and pen drivers but again it says " A supported tablet not found on the system". Someone please help. I am afraid it might be a hardware issue as the problem started when i turned the screen from laptop to tablet mode. Currently My X230t is just a Laptop and NOT a TABLET as there is NO touch and NO pen input, as if windows doesn't even recognize any tablet hardware on board. PLEASE HELP. Thankyou 

Answer:Help: X230t " A supported tablet not found on the system" Problem. Its not a tablet anymore

Perhaps the cable got severed when you were turning it around? I've had a Wifi antenna cable break this way on an HP tablet... If it's still under warranty have them check it and replace it if necessary. It could also be a loose connector but there's no way to be sure without opening the screen assembly.

1 more replies
Relevance 77.49%

Tablet PC Settings not showing in Control Panel Although Tablet PC Components enabled in Programs & Features.
I have tried System Restore, re-enabling Tablet Components...

More replies
Relevance 77.08%

The latest bios update of X1 Tablet (Model:20GG) breaks the sleep (or hibernation) function. I found the tablet sometimes cannot be waken up by pressing the power button after entering connected standby. The version of the flawed BIOS is1.68-1.21 (N1LUJ30W) After rolling the embedded controller version back to 1.20 (N1LUJ29W), the problem no longer exists.

More replies
Relevance 77.08%

hi guys i really want to try a windows 8 tablet and i plan to buy it either by the end of this month or by next January. I am confused on what to pick though
First of all, the reason why I want a windows 8 tablet IS because i like the interface. but more importantly, i need metatrader and cTrader in legacy app as im a full time forex trader. I have metatrader in my iphone but you cant seriously compare that with the windows version (no tabbing, no lines drawing, no fibonacci, etc.). cTrader doesnt even exist there.
im looking to replace my macbook pro (which btw i also installed windows 8 on it through parallels virtual desktop) with a windows 8 tablet to support my trading while im outside
So basically I dont need a super i7 tablet or something. However, im curious to know how windows 8 atom tablets perform. I have seen enough reviews and some people says atom tablets perform badly in legacy apps. Question is, how bad is that bad? Does it lag so bad even though i dont need to run heavy apps like adobe? I only need to run these trading apps which btw are very light. You can compare them with MS paint i believe, just with constant connection.
would it do well in atom tablets? I dont want lags when i switch from win8 native apps to metatrader and cTrader.
next question - how does windows 8 tablet on-screen keyboard work with legacy apps? Would i have special gesture to show up the on-screen keyboard or it automatically appears when i touch the screen? I personally dont believe ... Read more

Answer:Help Me Choose My Tablet - Thinkpad Tablet 2, Vivotab, Acer W700, Etc.

I forgot to add one more question. how responsive legacy apps (desktop mode) is to your finger? Do i really need a pen or it doesnt help either? Because acer w700 doesnt come with a pen so it's also a crucial question for me

20 more replies
Relevance 77.08%

When I use the X220 as a laptop I can duplicate the display through my SmartBoard projector but when I use it as a tablet and it is docked I have to turn the tablet and dock 180 degrees so I am not writing upside down on the smartboard;  that means the dock has the cables coming out the front.  I can undock and plug everything into the X220 but the beauty of the dock is that I don't have to!

More replies
Relevance 77.08%

I think iBall Slide i701 is the cheapest tablet in world (windows) even cheaper than Lumia 430.
http://www.amazon.in/gp/product/B00XVGQ0WM/ref=s9_simh_gw_p147_d1_i1?pf_rd_m=A1VBAL9TL5WCBF&pf_rd_s=desktop-1&pf_rd_r=1QHP7BJT33XWDP2N4NQG&pf_rd_t=36701&pf_rd_p=577130167&pf_rd_i=desktop
Only USD 77$
But i have some questions before i proceed to buy it for my child
1. As it is 16gb tablet but in actual we get only 4gb free space & i have read in reviews that once we update windows & other apps we are left with only 400mb space & we cant install other apps. So is it possible to install software's (.exe) on 64GB memory card which this tablet support ?
I am not talking about APPS, I am talking about .exe files like photoshop, ERP, educational softwares etc.
2. As it is having only 1 USB port so it is possible to attach a USB hub so that we can attach pen drives, KB, Mouse, HDD, 3g Dongel & power adapter at once ?
If anyone of you have used any windows 8/8.1 tablet then please reply.

More replies
Relevance 77.08%

I have a Cherry Mobile Alpha Morph that works without problems aside from the fact that, when I undock it from the keyboard, it doesn't detect that it should now be in Tablet Mode. I have to manually go to the Action Center and toggle it there. Same with docking it back. I have already checked my settings and I didn't disable Tablet Mode either.

Anyone have an idea how I can resolve this? I just want to seamlessly dock and undock the tablet and it should switch to tablet or desktop mode respectively.

I don't know if it's relevant but the OS is Windows 10 Home Single Language.

Answer:Tablet mode doesn't get engaged when I undock my Windows tablet?

I would like to know how to enable this as well - In fact, I was hoping to be prompted to change modes when dock/undocking....instead of having to find the setting and toggle tablet mode on/off every time.

2 more replies
Relevance 77.08%

I have a desktop that runs Windows 8.1. My x220 tablet runs Windows 7. I was thinking about getting a wacom bamboo tablet for my art in photoshop (which I make on my desktop... x220 isn't powerful enough for what I do in photoshop). Then I realized that my x220 tablet is kind of the same thing. Is there anyway I can connect my tablet to my desktop so that when I'm using photoshop, I can use the stylus on the tablet to control what I do? Many thanks in advance.

Answer:Connecting x220 tablet to a desktop to use it like a wacom tablet with stylus

AFAIK, not easily:http://www.ersatzhaderach.com/blog/2013/02/02/turn-an-old-penabled-tablet-pc-into-a-networkable-art-...

2 more replies
Relevance 77.08%

Hi. Recently, I have noticed that wifi connection in Tablet mode in my Thinkpad X230 Tablet is significantly slower than in laptop mode. Sometimes, it completely disconnected to the network. I tried to test with Speedtest. net and download a file via Internet Download manager. Both show that laptop mode has significantly higher and better speed connection than does laptop mode.  Does anyone have the same experience as me? Is the antena has any problem??? Thank you. I 

Answer:wifi connection on tablet mode - Thinkpad X230 Tablet

which model wifi card do you have? intel 6205, 6300 or ThinkPad 1x1 or 2x2.

3 more replies
Relevance 77.08%

After a fatal error in my windows, I had to reinitialize my windows 10. After I did so by the windows original tools, the windows became completely stable, but all tablet features are lost. Even thinkvantage cannot recognize many features and hardwares do not work. What should I do?

More replies
Relevance 77.08%

I am currently on a Dell Venue 11 5130 with a Bay Trail Atom Z3770 and 2GB ram. While it serves the purpose of my usage of office suites and web browsing, I could use a little faster tablet. It would stutter if I have more than 5 tabs open on Edge. But there is nothing wrong with this tablet with a plenty of battery life and nothing broken after using if for close to 4 years now.
I am looking at a Dell Latitude 11 5175 tablet with a Core M3 and 4GB of ram. Is this upgrade worth it? Or should I save some more money to get the Core M5 version for around $150 more? My usage is office word, and youtube.

More replies
Relevance 76.67%

I have a laptop (windows 10) that suddenly stopped accessing a number of different random websites, including this one... saying "server DNS address could not be found". Other websites, such as Facebook and yahoo, it still accesses. It does this on the chrome browser and the IE browser. The tablet I'm typing on right now works fine however, and accesses everything without problem. This morning both were working properly; this is a sudden development.

Answer:Cant access numerous sites on windows 10 laptop; tablet working fine

By the sounds of it your internet service providers main DNS servers are having issues or, network issues. It could be due to your ISP doing network maintenance on their part as well. What can you do? Well instead of using the ISP's DNS you can use a public Google DNS. Inside your router change the DNS to 8.8.8.8 & 8.8.4.4 However, I don't recommend that you permanently change them from your ISP.

2 more replies
Relevance 76.26%

Well, I've finally had it. I've had my 6365 CTO X60 tablet pc for over a year now and last Monday I lost pen functionality in tablet pc mode in the afternoon after working fine in the morning. It works fine, even now after rotating the screen back to laptop mode. As soon as the screen is rotated back to tablet pc mode, no pen functionality but the mouse still works fine so I know it's functional in laptop mode but rotate back, all ok!  I did uninstall the Wacom drivers, restart, and then downloaded the tablet pc, windows xp version drivers from the wacom.com site as instructed in a previous post. Unfortunately, the digitizer pen is still disabled in tablet pc mode and works fine when rotated back to laptop mode. I've called Lenovo tech support in Atlanta four times now and they've been totally useless. I wiped out my X60 tablet last Friday and used Rescue and Recovery to reinstall the operating system back to it's factory settings. I went back and unistalled and reinstalled the Wacom driver. Nothing. Since that didn't work either I've requested the box to ship this back to the Memphis Depot. Hopefully, I'll just get a new replacement machine that works but I'm so angry and frustrated w/ Lenovo's support because it's obvious that the people on the phone are not tech specialists and they couldn't even point me in a direction to get this fixed. It's cost me over a week now wo... Read more

Answer:X60 tablet pc digitizer pen functionality disabled in tablet pc mode

Problem solved! While the support folks weren't able to fix the problem over the phone, they did overnite me a prepaid return box which I sent back that day. Two days later they overnited my X60 tablet back fixed with a note saying 'LCD enabled'. I'm impressed how quickly they got my tablet pc back up and running. I'm glad I got that 3-yr. support warranty because I usually opt out of those things. This totally paid for itself. I just wish I hadn't been so reluctant to send back my laptop because I do need it for work and I figured I wouldn't get it back for at least a week or longer. I was so frustrated and pessimistic that I forgot sometimes these problems do get fixed in a very satisfactory manner. It's too bad the initial steps that led to sending it back were so painful. Bottom line: Lenovo fixed my pc quickly, no questions asked. Thanks!

1 more replies
Relevance 76.26%

Hi, I have here a X220 Tablet that seem to have a FAN problem.Often in the last days my CPU temperature is often over 90 °CAnd the fan has problem to reduce the temperature.I have also situation that the CPU is going too hot and the tablet switch off! With the CPU tool TPFC.62 I can see that the fan speed is 2300-2500 RPMs.But this seams not enough to be. And now the strange thing:When I disable the graphic adapter ?Intel(R) HD Graphics Family? (Driver 8.15.10.2321) and reboot and do the same thing that I done to get the temperature over 90 °C with the intel graphic adapter the temperature is not going over 83 °C!!! The fan speed is 3500-3800 RPMs. Can someone helps me with this issue?  

Answer:X220 Tablet FAN Problem - temperature over 90 °C - tablet switch off :(

Hi giciorek,
 
I understand that your fan/temperature problems can be frustrating.  I would try updating your BIOS and also updating Power Manager.  (Some on the forum have tried downloading ThinkPad Fan Control, but that is not an official Lenovo solution.)
 
Download Power Manager here:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014924
 
Download BIOS Update here:
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS018805
 
In Power Manager, click Advanced at top right, you can Set Optimize Fan Control to Balance All Parameters under Battery Settings.  Set it to Reduce Noise Dynamically under AC.
 
Let me know if this helps.
 
 





Did you find a post awesome? A great response? Kudo them!Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

2 more replies
Relevance 76.26%

So the DV port on my asus eee pc 1005peb is failing, and got the idea from android central to look into tablet and tablet hybrids. I kind of like the idea of having a hybrid for both the netbook kind of experience combined with a tablet experience. I'm having trouble discovering what my brands and model options are for that type of device. I'm concerned from what little I have seen so far I'm going to be against a cost prohibitive wall compared to spending $100 to have the port replaced. I'm one to figure if I'm going to toss that kind of cash into a repair I might as well consider replacing it with something else instead of doing the repair.
For my desktop PC I hesitant on going to windows 8 because of a lot of negative stuff I've heard but at the same time I hear good stuff about it too. But when it comes to a portable device like my netbook and a tablet. I think hm windows 8 (not RT) sounds like it would be a good fit since it is designed for both traditional mouse and keyboard input and touchscreen input. Plus I would like to retain the software I use on my netbook to use on whatever replaces it. Something I can't do with my current HP touchpad with webOS and android (CM9) on it. I tried using both as a replacement for my netbook but in the end there were just too many things I didn't like about that. I let my dad take my netbook out of town with him for about 2 month and was trying to use the touchpad as a replacement. I was glad to have my netbook back to use it again.
... Read more

Answer:shopping for netbook replacement with tablet or tablet hybrid

Sounds like you have a pretty good idea of what you are looking for. What would be the price range you are looking at?

6 more replies
Relevance 76.26%

hello all, i would like to set the three Tablet Buttons (the ones on the 'display' half of the notebook) to Shift, Ctrl and Alt, so i can use photoshop  also in 'tablet' mode of the notebook. the ctrl and alt keys were OK to set up, but it doesn't recognize the Shift key in the setup dialog. is there any known workaround?thanks for any reply.

Answer:x200 tablet & setting Shift to one of the Tablet Buttons

Try checking if the SHIFT key is actually one of the items on the drop down menu in the tablet pc button settings.





http://vanhavirta.fi/

2 more replies
Relevance 76.26%

I have a new X220 Tablet, and the Pen and Tablet functions work perfectly out of the box as long as the unit is on the Ultrabase. As soon as I remove from the Ultrabase (or boot while not connected), the Pen & Tablet functions stop working. Conversely, if I dock the X220, the Pen & Tablet functions begin working again. The behavior is the same regardless of whether I have an external monitor attached or not. Any thoughts?

More replies
Relevance 76.26%

I'm new to the Tablet community but excited to venture into it.  My workplace provided me with an X201 Tablet type 2985 model C5U.  The pen works great but I can emulate any of the finger/touch demos.  Is this not supported with my type or model?  Or do I need a special driver.  When I open the tablet PC settings, I'm given the option to identify my screen as PEN or TOUCH.  While I select TOUCH, no finger combination (one or two) that presses my screen will invoke anything.  I was hoping this would be a touch solutoin albeit more powerful than the iPad.  Appreciate your responses everyone. Thank you. L

Answer:X201 Tablet Tablet MultiTouch Support (Newbie)

welcome to the forum!
 
the 2985-C5U model has a pen-only outdoor-viewable display.   it does not support touch input.

3 more replies
Relevance 76.26%

Hey all, I have a weird problem.  My tablet buttons have stopped working-- but only in tablet mode.  That is, I can't rotate, or bring up the tablet shortcuts, or move around the screen in tablet mode.  Also autorotate doesn't work.  But if I switch out of tablet mode, I can do all of these things just fine (except for autorotate). Also, when I switch into tablet mode the screen doesnt rotate or anything, but when I switch out of tablet mode the screen rotates to the direction I defined in the settings (sometimes.. to be honest it seems pretty random to me).  I am running 32 bit vista w/ 4 gb ram on an x61 tablet with the latest drivers.  I have uninstalled the tablet button drivers and the lenovo system interface and reinstalled them already.. I have the latest APS. Help me out here.. I have no idea why this isn't working!  Don't make me have to reinstall vista to get the buttons working.. Tha'ts ridiculous!!  Arrrgh.

Answer:Tablet buttons stop working in tablet mode only

sano88 wrote:Also autorotate doesn't work.  But if I switch out of tablet mode, I can do all of these things just fine (except for autorotate).You haven't calibrated it yet and enabled it yet. You have to get into Tablet shortcut menu setting and do it all first. For the rest, uninstalled all ThinkPad Tablet Button Driver, ThinkPad Tablet shortcut menu then restar and reinstall vis System Update. Just let it find for you; that's the only thing I could recommend for this case.

8 more replies
Relevance 76.26%

Has anyone run into the problem where there is no audio on an X61 tablet even though SoundMax drivers are shown to be installed properly?  Any help would be appreciated. Thx

Answer:No audio on X61 tablet running Window XP Tablet Edition

I have the same issue right now on an X60 tablet that I just upgraded to Vista Ultimate.  All of my drivers are up to date, except it shows on windows update that I have an audio driver still to update.  I go through the process, and then it will not install the update.  I wish I could help with this more, but wanted to let you know that others have similar problems. I hope someone can help us.B 

1 more replies
Relevance 76.26%

Hi all,    I have a really annoying problem...my x220 tablet disconnects from the internet whenever I enter tablet mode. The internet can be working perfectly fine while in non tablet mode but as soon as I switch to tablet mode, my internet disconnects. And if I switch back to non tablet mode from tablet mode, my internet returns almost instantaneously. I can load a page in non tablet mode with no problems, switch to tablet mode and the page stops loading. If I return back to non tablet mode the page resumes loading without so much as a pause or a hiccup. Also, when I switch the computer to tablet mode, wifi networks disappear off of the "available networks" list that were there before the switch.     I've tried everything, from updating network device drivers, reinstalling network device drivers, running diagnostics, reformatting my computer, uninstalling Norton Antivirus, system restoring to days before the last known working date in normal mode and safe mode, and contacting customer support (chat and call, managed to get a hold of a rep) but none of them have worked.    I also used to have a networking log before I reformatted/system reset to factory settings and there were a ton of errors with words like avsc manager failed to "something" ... I'll reinstall the thinkpad network managing program to create another log. Can someone please help me? My last resort is calling lenovo support again to have tech support come to hel... Read more

Answer:X220 Tablet Internet Tablet Mode Problem

hey kiul676,that's weird, could you check your bios is at 1.24. if it isnt go here and update : http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS018805





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

9 more replies
Relevance 76.26%

plz help
i have lenovo thinkpad 2 tablet it was not running well so i decided to reset it ...
but after 1 hr,it says "WINDOWS INSTALLATION FAILED PLEASE RESTART THE INSTALLATION"
and it keeps on repeating the same thing...
please help me ....

Answer:PERFORMED TABLET RESET now UNABLE to START TABLET

If it is still under warranty, call Lenovo. IF you tried to reset to factory defaults, and it is still failing, then you have something else that is going bad. My suspicion would be memory as that is what happened to me although it was on a desktop. Something to check...good luck.

1 more replies
Relevance 76.26%

I have upgraded to Windows 8 64 bit on my X61 Tablet, however I cannot get the tablet buttons, hotkeys, or auto-rotation to work. My understanding is that Lenovo has stopped supporting these products. I think it is a shame to stop using a perfectly working tablet PC with a superior LCD. I don't want to go back to Win 7 leaving all kinds of nice features on Windows 8. Any suggestions? Is there a hope? Koray

Answer:X61 Tablet Windows 8 - Tablet Button and Features Request

Hi koray,
 
I've been playing around with Windows 8 since the developers preview.  I've ran it on a lot of older systems.  Getting things to work will require some experimentation on your part.  
 
You can start with your Driver Matrix.  There you can find the Hotkeys Utility for Windows 8.  You will also need the Power Manager Driver for Windows 8.  Not Power Manager,  just the Power Manager Driver.  
 
Run Windows Update, it will probably find some stuff.  Some Windows 7 drivers will work, others won't.  
 
I'm running Windows 8 Pro on an x60 tablet and everything works fine.  I also have it on an x61 non-tablet and it runs fine. I had to do a lot of messing around with stuff to get them to work right though. 
 
Just make sure that you set system restore points before changing anything so you can get back what you had before, just in case something doesn't work right.  And, only install one thing at a time and reboot and test it out thoroughly before you install something else.  
 
Good luck with this,
 
Dave 

1 more replies
Relevance 76.26%

Does anyone know if there is a program available (free if possible) similar to Quicken (Deluxe) that I could use on my Android Tablet(HP 10 Tablet G2 -2301)? That would keep track of bank accounts and interest earned, and keep track of one stock IRA and interest earned and yearly RMD? And produce reports for that interest earned, etc.? Mainly for using when preparing yearly tax forms.
 

Answer:Quicken alternative for Android Tablet(HP 10 Tablet G2 -2301

Have you looked at Mint.com?
 

2 more replies
Relevance 76.26%

I have upgraded my X201 Tablet to Windows 10 32bit. As far as I can tell, everything is working, including the WACOM drivers and touchscreen.  Wireless has worked perfectly so far, not sure about Bluetooth as I don't use it. My only issue is that the buttons on the display do not work. The power button located on the display does work. I tried installing the Tablet Button Driver II and it will go through the install but the buttons do not work.  This is the download link:http://support.lenovo.com/us/en/downloads/ds027627 The document claims Windows 10 compatability and was Last Updated :08 Jun 2015. On inspection, all the files extracted are dated from 2012 and when trying to manually run the software Windows throws up an error that the software is not supported on this PC.   I removed and reinstalled and noted that the driver information page when running the installer does NOT have Windows 10 listed as a supported system. My assumption is that the driver that they have linked on the download page is NOT the most current driver and is infact the driver for Windows 7 from 2012. Does anyone know how to contact Lenovo to get the correct driver posted to the page, or know of an alternate source to try and find it?

Answer:X201 Tablet Windows 10 Tablet buttons not working

hi, I can't help you with your question, sorry! Gooed to hear everything else is working fine on your system. Can you tell me what to do to get the x201 tablet's touchscreen to work!? I will have a clean windows 10 install. Where do i get the (right) drivers (windows, Wacom?) Thanx!Carlo

1 more replies
Relevance 76.26%

Hi I've looked at every category in the drivers matrix and absolutely cannot find the drivers that control the Tablet buttons on my tablet screen,  Can anyone point me to a link???  I found another thread on this forum that talks about a similar issue and someone posted a link to beta drivers, but the link doesn't go beyond the main Support home page at Lenovo.  Thanks, -G

Answer:X200 Thinkpad Tablet - Tablet buttons drivers NA???

Hey there Cr0sschex77,
 
To get some clarification to better direct you, what operating system are you currently using? Additionally are you referring to physical buttons or "buttons" on the touchscreen once at the desktop? Thanks Cr0sschex77!





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

1 more replies
Relevance 76.26%

Hi I have installed 64bit windows 7 on my machine quite recently in order to utilise the extra ram. When i rotate the screen clockwise to tablet mode, the screen will auto rotate to primary potrait by default and the buttons will work as usual. However, when i swivel my screen anti clockwise to tablet mode, the screen will NEVER auto orientate to primary potrait mode and all the tablet buttons will not work if i rotate the screen ANTI CLOCKWISE. Can anyone help me on this? Thanks alot in advance for the replies

Answer:X200 Tablet rotation and tablet buttons problem

I found another thread in another forum whereby another x200t user has the same problem. http://forum.tabletpcreview.com/showthread.php?t=22541 Hope someone can give advice regarding this. Thank you

2 more replies
Relevance 76.26%

Hi,
I'm going to be doing some presentations and teaching online. I'm using Team Viewer 9 running on Windows 7 as my software. I would like to be able to have the equivalent to a whiteboard visible to the participants.
For a demonstration of the sort of thing I want to do see
click here
where the presenter draws circles etc. He doesn't do any handwriting in the YouTube video (but he does in the actual presentation at CBT nuggets)
I'm total newbie when it comes to tablets, but a tablet that allows drawing direct on the tablet and simultaneous display on a Windows monitor. I know that the presentation on You Tube was done with various Wacom devices. Intuos4, Cintiq monitor, or more recently, Cintiq Companion tablet. (I tweeted the presenter Shawn Powers). These devices are a bit beyond my budget. Is there a cheaper alternative? Sadly the Microsoft Surface Pro 2 is not yest available in Australia (where I am) - I'm not sure if it's a possible answer, but I'm assuming it would be. Is there anything else that's not going to mean I have to take out a mortgage on my house?
Thanks in advance for your help.
cheers,
Bernard

Answer:Drawing on a tablet with simultaneous display on the tablet and a Windows PC

I assume you mean you want to use an app on a standard tablet such as a Nexus 7 or IPad and stream the tablet screen content to a monitor or TV?
Maybe something like this is needed

3 more replies
Relevance 76.26%

I just bought my Yoga 2 13, when I flip it to Tablet mode, the screen turns off. Apparently it goes to sleep. When I open it it turns on again. Do I need to do any adjustments? or is this a defect?

Answer:Yoga 2 13 Tablet Screen turns off when in Tablet Mode

Try updating your drivers first: http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/yoga-series/yoga-2-13-notebook-l...If that does not help, try a factory reset:1. Turn off your Yoga 2 132. Press the tiny button next to the power button on the right3. Follow instructions to perform a factory resetIf none of the above attempts have helped you, it is probably a hardware issue.

1 more replies
Relevance 76.26%
Relevance 76.26%

The bay trail tablets come with office 2013 preinstalled, I cracked my asus t100 and wanted to move office to my new dell venue 11 pro core i3 version. I downloaded office and it got to the point where it needed to check if any other computers are using the license. So of course with it being activated on the asus it didn't let me. So is there anyway of deactivating it from the asus and transferring it to the dell or is the office version "special" that came with the bay trail tablets?

Answer:Possible to transfer microsoft office from bay trail tablet to new tablet?

Uninstall it on the T100?
Sent from my Z10 using Tapatalk

11 more replies
Relevance 76.26%

Hi people!, Im pretty sure this topic has been discussed before but im still having trouble making it work. When in tablet mode jabbing any of the buttons doesnt do anything, however when i switch back to normal laptop mode the buttons that i pressed start taking effect (screen rotate, tablet toolbox) . ive tried reinstalling windows and all the drivers i would be great to get this working again! Ive got a X61t with the following installed:-Windows 7-ISD tablet 7.1.0-9-Tablet button driver 4.04-tablet shortcut 6.33 any help is appreciated thanks!

Answer:tablet buttons dont work in tablet mode

download thinkvantage system update, it should load all the missing drivers for you.

2 more replies
Relevance 76.26%

it's a weird problem. my pen tablet works completely ok in windows 7 ultimate 32-bit but fails to work properly in windows 7 home 64-bit. for the 64-bit pc, i tried using older windows version compatibility methods but it doesn't work.

i checked the software cd, it's suitable for windows 7 but doesn't specify it's for both 32 and 64 bit.

could it be a software incompatibility for 64-bit pc that results in my problem?

thanks.

Answer:pen tablet software works in 32-bit but not 64-bit.

I recommend going to the manufacturers website and seeing if they have software for your device that is specifically for 64-bit. Or you can give us the exact make and model of your device and one of us will look for you.

3 more replies
Relevance 75.44%

It doesn't download some games and it says I watched adult oriented stuff but I didn'tAlso it keeps saying I have a virus but I don't know the side effects.?......................its on my tablet.......?..........???message edited by delto.c

Answer:it says i have a trojan virus but my tablet works

This is a SCAM, probably ransomware. Don't click anything it says (or do anything).Just wait for someone on here who can deal with it.Always pop back and let us know the outcome - thanksmessage edited by Derek

20 more replies
Relevance 75.03%

Has anyone come across a problem with PEN input not being available at boot but becoming available when you disable and re-enable the HID component.  As soon as you shut the machine down and restart PEN input once again unavailable.  Windows event logs contains no error message in relation to hardware or drivers and none of the devices show and issues in device manager.Any help would be appreciated.

More replies
Relevance 75.03%

My X41 (1867-CTO) Tablet will not go into Tablet Mode.  Also ThinkVantage System Update has 2 updates that keep downloading and installing but just keep appearing.The stylus does not do anything either.













Solved!

Go to Solution.

Answer:Lenovo X41 Tablet - Tablet Mode Not working

You mean it doesn't change screen orientation when turn to tablet mode, right? If so, I have that problem too!! and no one helps us so far. http://forums.lenovo.com/lnv/board/message?board.id=X_Series_Tablet_ThinkPads&thread.id=4013

6 more replies
Relevance 75.03%

So I purchased my Tablet with XP Tablet OS downgrade (it was suppose to come with Vista, but I choose to have XP tablet instead). So my Laptop gets shipped in a speedy manner, I open the laptop up and there is a Vista sticker on it.  Luckily XP tablet  was installed on the laptop. However, on the bottom of my laptop is a Vista Business Product Key  . . .  Where is my XP Tablet 2003 product key? What if I wanted to do an OS refresh of XP Tablet without using the ThinkVantage software/bootup? What if my HD fails and I need to replace it? Does ThinkVantage offer to burn a cd/create an image or install of the Fresh XP OS install like Dell does? I know it offers to burn a recovery disk, but is that recovery disk just a restore point of the PC, or an actual OS installation. I really would like to be able to avoid the dependancy of ThinkVantage software on the hidden partition for restore and recovery. Also I guess whenever I'm ready to use Vista, how would I go about installing Vista? Is there another selection for creating a "Vista recovery disc"?Message Edited by tonefour on 08-26-2008 09:55 AM

Answer:X61 Tablet XP Tablet OS Product Key? OS refresh concerns!

I feel the same way as you. Last laptop crashed, and the recovery partition/MBR went too. The company wanted me to pay for recovery discs. I couldn't believe it. Anyway, I only have a partial answer for you unfortunately. I have Vista Business installed so you'll have to ask Lenovo about the XP part. I just spoke with Tech Support for though and they showed me where the option to Create Recovery Media was:Start-->All Programs-->ThinkVantage-->Create Recovery Media Follow the wizard and good luck, it worked for me.  We shall see if it actually works when the moment of truth comes. Best 

3 more replies
Relevance 75.03%

I just went about searching the web to find out if an X60/X61 Tablet pen fits in an X41 Tablet (as in, stores properly in the pen slot - it will definitely work on the X41 Tablet screen) and couldn't find the answer on any of the popular forums. So, I pinged some Lenovians to find the answer.





-----------------------------------Tim SupplesLenovo Social MediaGot a question? Don't PM me, post it on the forum!Lenovo BlogsX60 Tablet SXGA+ primary, Z61p fully loaded workhorse









Solved!

Go to Solution.

Answer:Does X60/X61 Tablet pen fit in X41 Tablet and vice versa? *SOLVED*

The answer is that the X41 Tablet pen fits in the X60/X61 Tablet slot, but the X60/X61 Tablet pen does not fit in the X41 Tablet slot. Now you know, and knowing is half the battle.





-----------------------------------Tim SupplesLenovo Social MediaGot a question? Don't PM me, post it on the forum!Lenovo BlogsX60 Tablet SXGA+ primary, Z61p fully loaded workhorse

1 more replies
Relevance 75.03%

Hi, Happy New Year. I replaced my old harddrive with a new one and I just installed windows xp tablet 2005 (not supplied from lenovo or ibm) on the new HD. Now it seems that a lot of drivers are missing. Like bluetooth, keyboard, wireless... The drivers are available to download from ibm's website, But I have to install 20+ drivers one by one. That is too much. After installing xp, my windows desktop showed no icons except for recycle bin (I believe this is due to drivers missing also). Anybody know is there a x60 tablet driver bundle/package cd image somewhere? How did you guys change your os to xp on a new HD? Thanks!

Answer:Installing XP tablet 2005 to X60 Tablet new harddrive

Why not let System Update do the work for you? You will need to have installed the MS .NET Framework 2.0 beforehand, instructions can be found on the site, and then let it loose.

3 more replies
Relevance 75.03%

I downloaded the 'driver' on the gateway website:
http://support.gateway.com/support/d...&uid=263185599

after downloading & Extracting the file. a 'read-me' file pops up.

it reads:

=============================
Overview

This document describes the steps necessary to install the Tablet PC button drivers for the notebook computer models listed in the Applicable Part Numbers section below.
Installation

1. From the Start menu, right-click Computer, and then click Manage.

2. In the User Account Control dialog box, click Continue.

3. In the left pane, click Device Manager.

4. In Device Manager, click the plus sign (+) next to Human Interface Devices.

5. Click Tablet PC Buttons, and then from the Action menu, click Update Driver Software.

6. The Hardware Update Wizard displays. Click Browse my computer for driver software.

7. In the Update Driver Software dialog box, type or browse to the C:\Cabs\D20113-002-001 folder. Click Next.

8. Open the D20113-002-001 folder and confirm the selection of the qttabbtn.inf file. Click Open.

9. Follow all onscreen instructions to complete the installation.
=======================

I get stuck at step number 5.. I do not have a 'Tablet PC buttons'!! (this is the reason why I need to download it..).. it seems to me this 'driver download' is actually an update for the driver. and not the driver its self.?

I downloaded other drivers from them, for my computer and they all worked great.. they all had easy 'install... Read more

Answer:Gateway Tablet PC, I need the 'Tablet Buttons driver'

Brittni-

After opening the qttabbtn.inf file (installation script), I found these alternative names for "Tablet PC Buttons." Try finding one of these names in the Device Manager:
"Quanta Computer Inc."

"Quanta Computer Tablet PC Buttons HID Driver"

10 more replies
Relevance 75.03%

The learning curve on this machine is steep if you want to take advantage of all the input options but I've put the time in and I'm starting to love it. There is one thing I wish Lenovo would address though. I see plenty of ThinkPad users with this problem going back to at least 2008, and no solutions forthcoming. The manual states: "On the display bezel near the screen is a row of buttons with which you can control your computer in the tablet mode, without the use of the keyboard."By default the buttons are set to turn your computer off, press CTRL+ALT+DEL, or rotate the screen 90 degrees. The manual goes on to describe how you can customize these buttons via the Tablet Shorcut Menu, which is accessed via Start > Programs > Lenovo ThinkVantage Tools > Tablet Utility.If you open this program you get a dialog box titled "Auto Screen Rotation Settings." This dialog controls what orientation the screen should switch to when you convert into tablet. So it really doesn't have anything to do with the buttons.The only dialog that allows any assignment of the tablet buttons is Windows Control Panel > Tablet PC Settings. Here the Buttons tab is supposed to list the actual buttons on the front panel and let you assign them, but the only one shown is the Screen Rotation button. This works fine, you can set the button's function for a single press and a long press. (Too bad it's not possible to use Shift by itself, but that is as-designed by MS.)It should go without sayi... Read more

More replies
Relevance 75.03%

X61 Tablet what OS better&faster XP tablet  or Vista Business. RAM 4Gb.

Answer:X61 Tablet what OS better&faster XP tablet or Vista Business???

I can say that XP is simply faster, but Vista is just much better as far as Tablet functionality is concerned.

1 more replies
Relevance 75.03%

Hi, I've just downgraded my X61 Tablet to Windows XP Tablet from Vista Busines. When i try to install Lenovo System Update i get the following error message"There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your personnel or package vendor. Action StartSuService.EXE, location: C:\Program Files\Lenovo\ ... \startsuservic.exe" Does anyone know what to do about this error? I have tried to:Add the "StartSuService.exe" file from another lenovo tablet, to the System Update directory, aswell as the installers cab files.Aswell as the obvious (rebooting, redownloading, and rerunning the installer). Thank you in advance,Mikkel

More replies
Relevance 74.62%

I recently bought a x220t through my school with Windows 7 Professional. My language setup is unusual: though I was born and live in the French part of Switzerland, I like to have Windows' interface in English. So while my "Display Language" is "English", my "Input Language" is "French (Switzerland) - Swiss French".I updated my system the best I could (both Windows Update and Lenovo System Update say that they cannot find something to update anymore) and installed some programs (including Office, Firefox MS Security Essential... Basically what you can install through Ninite). The tablet input panel worked very well, recognizing and predicting French language with ease - both handwriting and the language prediction using the virtual keyboard; I even started.But then, after installing some more program (unfortunately, I don't remember exactly what I installed...), the Tablet Input Panel stopped working. I can write on the writing pad but nothing is recognized (and so is the predictive text in the keyboard mode). Curiously though, if I set my input language to English, it suddenly works as expected (i.e. in English, with English prediction and all). I already tried to reinstall the tablet component (Program and Feature > Turn Windows feature on or off) and the pen driver (deleted it with the device manage and let windows reinstall it). I also tried this trick - but it doesn't work (even by forcing Windows 7 non SP1 compatibility). I also ran spf /scannow in cmd.exe to ch... Read more

Answer:Tablet Input Panel works only in English

Hello HoangP,
 
I have a similar setting English OS and input language is German.
 
The same behavior happens to me. The input panel  only works in English.
 
Sorry but I didnīt found a solution other then that, to install a German OS and use German as input language.
 
I think its a Windows "feature".

9 more replies
Relevance 74.62%

Hey all, I am having trouble with my Tablet PC. I sent this email to HP, but their email response service is apparently down until Monday :/

I'd rather not wait that long, so this is exactly what I sent them. Any suggestions to help get my tablet working again would be great.

Thanks in advance.

--------
"Please provide the exact problem description."

Hello.

Recently the touch screen input has stopped working entirely on my tx2000 series Tablet PC.

I believe that the issue is related to the "Wacom Touch Serivce".

Below is a direct link to a screen-shot of three relevant windows, from top to bottom respectively;

*
http://img525.imageshack.us/img525/470/tablethelp.png
*

1] The Services window.
2] The error that is produced when I attempt to Start the service manually in the Services window.
3] The service as it appears in the System Configuration window.

This second link shows a relevant portion of my Device Manager, which is showing no errors whatsoever;

*
http://img135.imageshack.us/img135/4...icemanager.png
*

I also have one more screen-shot that appears to show there is nothing wrong with the drivers or software;

*
http://img211.imageshack.us/img211/8554/cptablet.png
*

All of the options and menus appear in the Control Panel properly.
These things in mind, it appears to me that Wacom Touch Service is the issue.
I am not sure what I can do to resolve this, since reinstalling the drivers has not allowed the service to start.

----------
"... Read more

Answer:Tablet functionality on laptop no longer works

hi i have the exact same problem as yours. im unable to use the Tablet functionality. if u found a solution for your prob then plz let me know the same.,
thanks.

3 more replies
Relevance 74.62%

 













Solved!

Go to Solution.

Answer:Which version of Pc Doctor for Dos works with X220 Tablet

Hi mfactor00 and welcome to the forum!

Your message turned out blank because:-

Users of Internet Explorer 9 are experiencing problems creating posts and private messages. The content is lost and appears blank when posted. While this is being investigated and fixed, please use Quick Reply, Internet Explorer 9's Compatibility View, or an alternate browser to post. Thank you.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Espaņol Visit my YouTube Channel

3 more replies
Relevance 74.62%

I'm searching for a tablet that will work with vista basic home...seems that the wacom bamboo or intuos will work but will disable some of the features...i don't need anything highend at the moment i just need a tablet that's suitable for illustration and will work on this vista basic...any suggestions?

More replies
Relevance 74.62%

I have a (ZTE) USB modem that I use to connect to the internet over the mobile/cell phone network. Since "upgrading" my laptop to Win 10 Creators edition, I have not been able to launch a connection. The (telstra) dialling app returns "The modem (or other connecting device) is already in use or is not configured properly."

However, exactly the same setup on my Tablet computer works just fine. Same OS, same dialler sotware, same drivers, same device.

I have removed/reinstalled the drivers, and dialler software.

I infer that something else on my Laptop is conflicting, but don't know what.

I have tried everything in here:
Fix: Error 633 Modem (or other connecting device) is already in use - Appuals.com
The stuff (5 and 6) about conflicts on port 1723 looked hopeful, but didn't help. Is it possible I am using a different port? If so, how do I find out which one?

the nets.txt text is here:
'Untitled Post' | TextUploader.com

any ideas ?

TIA
p.s.
The (problem) laptop is a Lenovo Yoga2pro, Win 10 Home Build 15063.332, 64bit, i7-4300U
The (no problem) tablet is a Tesco Connect, Win 10 Home Build 15063.332, Atom Z3725G "32-bit OS, x64-based processor"

More replies
Relevance 74.62%

I had to re-install winxp on my x41 tablet. I had no recovery partition and the recovery CDs did not work, so I had to install a fresh Win XP Pro.The touch screen no longer works, i.e. the digitizer pen no longer works. I spent hours downloading drivers and software from lenovo support centre but nothing worked. I have one device in hardware manager that is not working, it is an "Unknown Device" described as "on Intel(R) 82801FBM LPC Interface Controller - 2641". I cannot seem to find a driver for it. I installed ThinkVantage system update software, which installed and updated all critical and recommended updates in addition to some of the optional stuff that seemed remotely relevant. Any help would be much appreciated.

Answer:x41 tablet touch screen no longer works

it may be this one http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-58054
 
 
EDIT: normally Dave ,you fast typing folks beat me





_______________________________Thinkpad R61 7733-1GUThinkpad X61T 7762-54UThinkpad X60T 6363-4GU_______________________________Did a member help you today? Thank them with a Kudo!If a post answers your question, please mark it as an "Accepted Solution"!Regards,GMAC

3 more replies
Relevance 73.8%

actuating the sync facility with my tablet gives only as partial result ,with the same four addresses in each case.Tablet one ---MoMo with-ICSTablet two --Fusion with JellybeanHow to get full list?

More replies
Relevance 73.8%

How do I reactivate automatic tablet mode? Setting "always switch" no longer works.

More replies
Relevance 72.98%

I have updated all of my drivers from the Lenovo Yoga 13" site.  I read on here to pay special attention to the Synaptics driver, mine is 16.2.21.4 from Synaptics.  When I flip in to tablet mode my mouse moves around when I touch it.  Also the F6's "disable touchpad" doesnt work.  Its really annoying to not be able to use it as intended.  Anyone have a fix for this?

Answer:Yoga 13" - Touch Pad not disabled in tablet mode/F6 No longer works.

hi OmegaNine,
 
Sorry to hear what happened,
 
1. Can we Try this,
 Go to Control Panel / Programs and features/ uninstall a program
    Look for the Synaptics Software, Uninstall it there.
 
2. Go to Device Manager and look under "mice and game controllers" and make sure it does not say Synaptics there.
              If it Does Uninstall it as well and put a check on the box if it asked "delete driver software"
 
If the system did not asked you for a restart, Restart the system Manually.
 
Open Device Manager again and open the category Sensor
  like on this photo
     http://www.codeproject.com/KB/system/wiisensor/wiisensor11.png
Uninstall everything under Sensors but DO NOT put a check on the delete driver Software.
 
Restart
 
Download and install this driver
       Synaptics TouchPad Driver for 64-bit WindowsRestart after installation and Check if You still have the Issue.
 
Hope this helps
Cheers!!





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 72.16%

Hello, I've owned my Yoga Pro 2 since it hit the market and have been satisfied until now.  I tried starting it this morning and there was no response except for the white circle next to the power button being illuminated.  I tried holding down the power button for ten seconds to restart: nothing on the screen.  I tried holding down the power button for 90 seconds (per research on others' successful attempts online): the white illuminated circle next to the power button illuminates to orange for about 3 seconds and then back to an illuminated white circle with nothing on the screen. The next thing I tried was plugging it into another outlet with no changes.  Finally, I tried starting it in tablet mode and it booted up. After booting up, I immediately made a backup onto an external HD as the touch screen worked and I was able to use it as a tablet.  Next, I tried to see if any other modes worked (e.g. tent, desktop, etc.) and after lifting the screen to transition less than 1/2 an inch, the screen would immediately turn black with keyboard and power buttons being ineffective.  Upon returning to tablet mode, I pushed the windows home logo on the screen and the screen popped into life.  I was able to use it in tablet mode again. Repeated attempts to return to transition to other modes resulted in a black screen after reaching the 1/2 inch mark.  Is this a wiring/hardward thing or is it a software fix?  I've uninstalled ... Read more

Answer:Yoga 2 Pro 13 (Windows 10): Only tablet mode works, black screen for all other modes

I found a small magnet attached to the bottom housing from my refridgerator.  I removed it and now it is running like normal!

1 more replies
Relevance 72.16%

Dear Lenovo support staff  / community, I just purchased a brand-new X200 and the pen / touch / tablet feature works out-of-the-box with its pre-installed Windows Vista 64-bit OS.  Because the applications I intend to use the Tablet with do not support Vista 64-bit (namely, Dragon Systems), I used the Windows XP Tablet Edition SP-2 Product Recovery Disc kit that came with the Lenovo tablet, and followed the conversion instructions included in the booklet down to the letter. However, when it converted the OS to Windows XP, the pen / touch functionality is completely gone, and I am unable to find any help online, or in Lenovo product support when called in. Installing the Multitouch drivers on the Lenovo support site for X200 drivers does not work, and installing the WACOM drivers does nothing either. I can confirm this is most likely a 100% repro case, as I have two brand new X200 Tablets and the same behavior is exhibited on both. Please advise.

More replies
Relevance 72.16%

I was previously running Windows 8 Preview and did not have any problems with the touch screen.  I have tried two separate clean installs of Windows 8 Pro, and the only thing that will not work is the touch screen with my finger.  The pen still works, but not the finger touch.  The driver installation for both the pen and the multitouch fails with and error saying "A supported tablet was not found on the system." Help Please.

Answer:Touch Screen No Longer Works After Windows 8 Install on X220 Tablet

I had the same problem on my x230t. I uninstalled the wacom driver and the problem magically fixed itself.

3 more replies
Relevance 72.16%

Is it possible to use a Tablet PC Pen on the display screen (13.3" Toshiba True Brite(r) WXGA TFT High Brightness) of my Satellite U400-137. I have some pre-loaded SW for Tablet PC (I Ignore if it was supplied with Windows Vista or some additional complimentary SW supplied by Toshiba with my Note book).
In case that it is impossible to use the pen on the screen does exist some external screen / display by Toshib to connect to my notebook, which coul support Tablet PC SW?

Answer:Satellite U400-137; Tablet PC Pen - Tablet PC

I doubt you can use a pen, even if the laptop has touchscreen capability.

The Tablet PC laptops have an extra digitizer layer inside the screen to sense pen input, so you would need to have a Tablet PC model like the Portege M750 or M780.

3 more replies
Relevance 72.16%

Random question, I know. Anyone know the answer?
 

Answer:Will Windows XP Tablet Edition run on a non-tablet PC?

mrfettucini said:





Random question, I know. Anyone know the answer?Click to expand...

If anyone is interested, the answer is yes.
 

1 more replies
Relevance 72.16%

Hi! and sorry for my bad English, If any one knows it is possible to replace the X61 tablet motherboard with X61(no tablet) motherboard?

Answer:X61 tablet motherboard replacement with X61(no tablet)

don't think they are cross compatible when i last checked. 

1 more replies
Relevance 72.16%

Got a tablet PC, but we lost the original system disc that came with it. Can I simply put WinXP Pro on it or do I have to put Tablet Edition on it?
 

Answer:Tablet Edition required for Tablet

6 more replies
Relevance 72.16%

Hi allI need some help, the pen is working when i uses the X61 whwn the scereen is in the "normal position". But when i try to use it i tablett position don't work ?Ļ?OS is WinThx for help 

More replies
Relevance 72.16%

Hi there, I hope someone can answer me a little querstion. I recently bought a x61 tablet and am really happy with it. Although I could be much happier If someone could help me with the following problem. I use Photoshop often, very often and for that reason I use the shift key a lot. In order for me to use it in tablet mode however I always have ot open the lid enough for my hand. I tried to map the tablet pc buttons in the control panel but it doesn't let me. I can map ctrl and alt and all of those but not shift.Is there some secret way to map the shift key? Or do I have to use some loophole and remap one of my normal keys. I hope someone can help me or at least tell me there is no way to do it. It would be greatly appretiated. Thanks in advance Pix (Short for Phoenix )

Answer:x61 tablet - How to map Shift key to tablet buttons?

I don't really have a direct solution for this since I want to customize them as Ctrl, Shift, all kind of this as well. However, there is a workaround that I found it's really good. What you have to have is "Mouse"  wired or wireless doesn't matter. Though I do recommend you to use wireless and Logitech as a brand. The reason why I recommend Logitech is because they have real nice SetPoint program which allows you to customize every buttons on your mouse. Then just map one of them as "shift" It works perfectly.. One hand with pen and another on mouse. I think Razer and Microsoft are another brand I know which have this feature in their software.

9 more replies
Relevance 72.16%

I wanted to give my impressions of the Lenovo TPT2. First off, the model I have is the 3679-27U, this means that it has the digitizer pen, windows 8 pro, no NFC, no 3G/4G antenna (though there is a slot for a SIM card). Let me also be frank about my biases concerning tablets. I am not a voracious media consumer. If Im going to watch a movie or TV program I prefer to do so with a large screen TV in the comfort of my living room. As far as checking email, messaging, twitter, and facebook that is why I have a smartphone. Why do I need another piece of electronic equipment that does the exact same thing as my smartphone? In my opinion iPADs and Android tablets are really only good for media consumption, they give you a slightly larger screen to run the same apps that your phone runs. If Im going to buy a tablet it has to provide some functionality that my phone or laptop cannot, otherwise it is a waste of money. Therefore, a tablet had to be able to run productivity programs: MS Office, Photoshop, Illustrator, GB-Stats, etc That meant a tablet using either the Atom processor or a Core processor (i3, i5). This left out not only Apple and Android but also any tablets running Windows 8 RT. Obviously one the major advantages of a tablet is its size and portability. My laptop is a comfortable size and fairly easy to carry around, so what advantage would a tablet give me. The answer is battery life. In order to be practical I would need a laptop with a significantly longer run time tha... Read more

Answer:The Lenovo Thinkpad Tablet 2: Everything a tablet should be

Nice review. I have had my TPT2 for a little over a month now. I have used it extensively as my only device away from the office and have been able to do so without adjusting my computing needs too much. The only drawback that I have had is an under-powered USB port where i am unable to attach my external hard drive. Anything that I knew I was going to need for the day or trip I load onto a USB stick and problem averted.
Edit: I suppose I should mention that my usage is not too intense in terms of productivity. My programs of choice are typically the Microsoft Office package. I do a lot with excel, word, and power point and so far, I haven't run into any issues. I'm in the process of getting a new monitor for home and i'll have a better idea what it's like running a multiple monitor setup from the TPT2 and mini HDMI to HDMI connection. At this point I have a BT keyboard and Mouse which I have been using for the past few days with no issues (except when the battery is close to dying in the keyboard and it behaves as if it is possessed).
I might be one of the lucky ones but haven't had any issues with the wifi signal, sleep issues others have experienced, etc. Outside of the USB and mini HDMI to VGA issues, I'm still completely satisfied. If Wacom could update the drivers to enhance the accuracy of pen input, then I'd be completely satisfied given my particular usage patterns.

13 more replies
Relevance 72.16%

 Last week I woke up my X60 from sleep mode like usual and was greeted with a nice "Unknown device found" message. I found that my tablet pen does not write, no buttons on the monitor work and the status lights on the monitor do not work (the charging, battery light and sleep light do not turn on). I have tried several driver upgrades from the website, but none seem to do the trick. I am trying to avoid reformatting to get them to work again, but if that's what it takes... Any suggestions? Running Vista Buisness. 

Answer:X60 Tablet uninstalled tablet driver, help!

Welcome to the [email protected]!  Please contact the help desk about this.  The error that you are seeing is typically related to a bad digitizer.  This is not something that you can replace, as it is attached to the LCD.  They should let you send it in and they will repair this for you.  

1 more replies
Relevance 72.16%

Hi I have just updated an old laptop with Windows 8 (Microsoft has a great offer right now = it is only a great offer if it works ;-) )The PC is a: Lenovo ThinkPad X61 tablet 7767.But I am having issues with the tablet interface. Windows 8 has been designed to tablets...With the virgin installation, the tablet interface does not respond.The tablet is found in the Device Manager:+ Human Interface DevicesHDI-compliant device (3 lines)Wacom Penable Dual TouchAll control programs are in place, calibration program can be opened, but there is no response from the tablet (pen or touch). I have looked at the lenovo support site, and downloaded various drivers, most with no effect, others caused windows blue screen - which in windows 8 is more light-blue greenish.I have also Installed ISD_DualTouch_710-9 from Wacom.eu, this gives the most positive result.Both pen and touch works (no dual touch), but is unaligned (when in a corner, pointer is 2cm from corner x and y. center of screen is aligned)I cannot calibrate, neither pen nor touch. Running tabcal (from control pannel or commandline) gives 4 popup windows with error messages:1) Failet to enumerate the installed digitiser devices.2) No suitable hardware was found to calibrate.\nWindows supports calibrating only integrated digitisers.3) Invalid display was specified.The Device manager lists the tablet as working:+ Human Interface DevicesHID-compliant deviceWacom DeviceI have tried to find a file holding the calibration; I found a ISD... Read more

Answer:X61 Tablet with Windows 8 - no tablet function

check this topic

3 more replies
Relevance 71.34%

The hardware on my one month old Yoga 910-13IKB (Windows 10 Pro ver. 1703) is now stuck in what seems like tablet mode:The built-in keyboard does not work anymoreThe touchpad does not work anymoreThe screen is stuck in landscape mode and does not rotate when the laptop is in tent modeThe speakers are stuck with the awful tablet-mode sound qualityWhen I boot to the BIOS, the keyboard works with no issue. However, when the OS boots, it almost instantly switches to the previously described mode. If I spam the keyboard as the laptop boots, it briefly works (I can type 3-4 letters on the log in screen) and then instantly stops working. Things I have already attempted:Looking for an answer onlineRebooting the laptop multiple timesTurning the laptop off and then turning it on againUpdating the drivers (+ reboot)Reinstalling Yoga Mode Control (+ reboot)Opening/closing the lid from its closed state to the tablet state and everything in betweenThings I am reticent to do:Since this is a brand new machine, I do not feel comfortable fiddling with the actual hardware (i.e. opening it to remove a battery to do a hard reset)Suspected source of the issue:I think this has to do with the laptop believing that it's being booted while the hardware is in tablet mode (screen rotated all the way open) although it isn't. I am severely disappointed in how finicky this laptop is for the price...Thank you for any help

More replies
Relevance 71.34%

yoga 710 touch is not working when layed flat in tablet mode but works in other positions

More replies
Relevance 69.7%

Hi,. the particular model of my x200 is 7453-FJ9. I bought it from ebay and the seller claimed is was multi-touch. After checking on the Levono support page where you identify the machine features through the model # above, it does not mention anything about being touch capable let alone multitouch. However, since I installed a new copy of windows 7 pro 64-bit on a new hdd, after installing all of the automated lenovo and windows updates, I checked the system properties and it states 'Pen and Single Touch Input Available' as shown in my system properties screen below.
 
Link to picture
 
I have tried to use the single touch input but it does not seem to be working. I have tried calibrating touch input though the screen calibration and it has not worked. I have looked at the HCI devices in the device manager and it shows 'Wacom Penabled MiniDriver','Bluetooth Remote Control', 'HID Compliant Consumer Control Device' and several repeated entries of 'HID-compliant device' but nothing about touch input ! 
 
I don't understand what is going on, do you think this tablet has touch input available ? Should I try install the touch driver on the lenovo website ? the wacom website ? or am i just wasting my time thinking it has touch input since it is not mentioned on the 7453-FJ9 lenovo support page (that I can see). Any advice on this would be kindly appreciated..
 
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules




... Read more

Answer:x200 tablet : does my tablet feature pen AND single touch input or just pen input ?

http://support.lenovo.com/en_US/product-and-parts/partsLookup.page
 
Type in the first 4 digits of the model number and then the serial number of your machine.
 
Make a note of the Pt# of the display and the description and I'll see if I can get the specifications for your display.
 
Dave

5 more replies
Relevance 69.29%

After installing the Windows 10 creators update, I have the following problems: - The touch including the Windows key does not work any more. I can not find a driver.- The energy display is also missing. - The tablet works very slowly. Does somebody has any idea? Thanks Andreas

More replies
Relevance 68.88%

I have just purchased an X61 tablet about three week ago.  I have to say that I am really disappointed, because I get the Blue Screen of Death (BSOD) several times a day.   I have tried updating the drivers, but that did not help. Does everyone get the BSOD so often, or, is it just my machine?      I would appreciate any suggestions on what I should do?  Should I return it?    PLEASE HELP!    Thank You.

Answer:X61 tablet -- does everyone get the BSOD often?

Please provide type / model number and OS, (add it to your sig in your profile), that helps.Which updates are you referring to? Windows? Lenovo? Turbo-Memory as referred to in this thread?Have you modified the ThinkPad? More memory? Factory or clean install?Sorry about all the questions, but at the moment we do not have a lot to go on.

7 more replies
Relevance 68.88%
Question: X41 Tablet BSOD

Im getting BSOD's during windows installs. I have tried all of the obvious things like changing CD's Windows versions and swapping out the single RAM Module. I am suspecting that the fault may lie in the onboard 512mb RAM. I have looked through the bios and could not see a way of disabling it. does anyone know of a way to disable this onboard memory or of another workaround?  Many thanks.

More replies
Relevance 68.06%
Question: x200 tablet BSOD

Every day, at least once, if not 2-3 times, my tablet blue screens with "Stop: 0x000000F4" I have not installed new software or hardware. The tablet is completely up to date according to Lenovo system update and Windows update (Vista 32 bit SP 2).  Since I purchased it in March it has been freezing on me and I have had to hard reboot at least a few times a week. Now I get the blue screens and it is making me want to throw my computer against a wall and go purchase a Macbook Pro.  Does anyone have any ideas as to what the problem is?

Answer:x200 tablet BSOD

Could be a couple of items: 1) memory, 2) hard drive, 3) motherboardFor 1), I'd suggest getting a copy of memtest86+ from here: http://www.memtest.org/#downiso Create the boot media and let the program run for at least three complete passes.For 2), I would get a copy of PC Doctor for DOS from here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-69537 and run the Fixed Disk diagnostics. I have not personally used this version of PC Doctor but I have run the one for T4x, T2x, A3x and X2x systems and they all have a diagnostic for checking the hard drive.For 3), use the same PC Doctor for DOS diagnostic and run the Systemboard and CPU tests to verify your motherboard.

1 more replies
Relevance 68.06%

Hello
I am also experiencing the BSOD when my computer goes idle. But the advice in those threads hasn't fixed my problem. After 10 minutes of no activity or input by myself the BSOD will appear with an error 'Kernel Security Check Failure'.
I have followed the instructions on the thread 'Blue Screen of Death (BSOD) Posting Instructions' and attached the relevant zip files (note the file report.zip is from Perfmon.exe - I wasn't sure if I should send all files or just report.html).
Relevant Info:
· Windows 8.1 OEM OS
· 64 Bit
· Original OS: is and was Windows 8.1
· Age = < Year
· Never reinstalled/changed the OS
· Surface Pro 3 Tablet 128gb HD 4gb RAM
· I also ran 'SFC /SCANNOW' (in admin command prompt) and I get the error: 'Windows Resource Protection found corrupt files but was unable to fix some of them.' I've attached my log file from C:/Windows/Logs/CBS.txt. Its says there are 4 files it could not fix.
· I recently installed Adobe Reader and got annoyed with its auto updater always running in the background. So I went and deleted that .exe. Maybe this has caused the error to occur - conflict with registry entry and non-existant .exe?
· Following advice on another thread; I uninstalled the Windows Update KB3022345 but this didn't stop the problem.
 
[attachment=165960:report.zip]
[attachment=165961:SysnativeFileCollectionApp.zip]
[attachment=165962:CBS.log]

Answer:BSOD When Tablet Goes Idle

I'm late for work, please try this for starters:

 
Then please run the following DISM commands to see if there's any problems with the system (from an elevated (Run as administrator) Command Prompt).  Press Enter after each one:Dism /Online /Cleanup-Image /ScanHealthDism /Online /Cleanup-Image /CheckHealthDism /Online /Cleanup-Image /RestoreHealth
FYI - I have repaired systems using the last command even though problems weren't found with the first 2 - so I suggest running them all.
From this article: http://technet.microsoft.com/en-us/library/hh824869.aspx
You can also run sfc.exe /scannow from an elevated (Run as administrator) Command Prompt to check for further corruption.

Post back with the results and we'll move on to other things if that's not successful.

2 more replies
Relevance 68.06%

i have recently bought the hp pavilion fx200 tablet and it is constantly giving me problems blue screening and freezing ect.
the code that come up. . .
***stop0x00000024(0x00000000001904aa,xfffffa6001acf4aa,
0xffffa60156fd 258 , 0xfffffa60156fcc30,0
ntfs.sys-address fffffa601acf4aabaseas
fffffa6001a0f000, date stamp 479190d1

please help to tell me the problem asap
Amber

Answer:HP Tablet BSOD 0x00000024

Hi. . .

0x24 = NTFS file system problem - run chkdsk /r then re-boot.

Regards. . .

jcgriff2

.

1 more replies
Relevance 68.06%

I have BSOD issues of a tablet of mine (Dell Venue 11 Pro 7140). Newest Bios is installed, also all (new) available drivers. I have two last dump files, which are though 550MB each, so I cant upload them here. I followed the tutorial of getting information from WinDbg, which I will present here, in the hope someone sees anything from the following information maybe. Would welcome any help of identifying the issue.

Answer:Tablet BSOD while sleeping

The logs are in a foreign language and cannot be read. If possible please change the default language to English so that the logs can be troubleshooted.
Language - Add, Remove, and Change in Windows 10 Windows 10 General Tips Tutorials

BSOD - Posting Instructions - Windows 10 Forums

0 more replies
Relevance 68.06%

Hi,

Recently my school just bought 20 over sets of Fujitsu tablet T4220 series. The problem is when i tried to rotate the screen 180 degrees, it will then prompt me the error.

Stop: 0x000008E.

I did cloning to all the tablet and i just couldnt figure out why. Pls help. thanks..
 

Answer:Fujitsu tablet BSOD.

sounds like it might be a driver issue. is it up to date?
 

2 more replies
Relevance 68.06%

Hi,

I am getting a BSOD with the error DRIVER_IRQL_NOT_LESS_OR_EQUAL and (igdkmd32sys). I am running full Windows 8 on a Dell Latitude 10 tablet. The tablet reboots with no further problems. The requested file is attached. Thanks in advance for any assistance you can provide.

Answer:BSOD-Windows 8 Tablet

Please re-run the data collection app and let it run for at least 15 minutes (or until the app itself says it's done).
Then zip it up and upload it with your next post.

There doesn't seem to be much wrong with the reports here.
I would suggest updating your video drivers from the Dell website (because the igdkmd32.sys driver is for your graphics card)

If the BSOD's don't stop, then I'd suggest running Driver Verifier according to these instructions: Driver Verifier Settings

At work we rarely fix tablets - it's much easier to Refresh/Reset them (primarily because there's not a lot of data stored on them and each one has it's own particular drivers). Is there a reason that you don't try this? We can help with backing stuff up should you choose to go that way.

Analysis:
The following is for informational purposes only.

Code:
**************************Wed Oct 9 00:45:55.681 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\100913-53656-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x86 compatible
Built by: 9200.16659.x86fre.win8_gdr.130708-1504
System Uptime:9 days 2:38:21.920
*** WARNING: Unable to verify timestamp for igdkmd32.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd32.sys
Probably caused by :igdkmd32.sys ( igdkmd32+17cbc )
BugCheck D1, {fd4db12c, 2, 1, 8e902cbc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Arguments:
Arg1: fd4db12c, memory referenced
Arg2: 00000002, ... Read more

2 more replies