Computer Support Forum

Touch w/finger

Question: Touch w/finger

Can I used finger instead of pen on model # 744943u?

Relevance 100%
Preferred Solution: Touch w/finger

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Touch w/finger

Probably. I have a 7448CTO that does. I don't think it's a multitouch, either. Should be the same hardware.

2 more replies
Relevance 65.6%

Hello All - I just noticed that my multi-touch (not enhanced multi-touch) screen no longer responds to finger touch; just pen. It used to respond to both before i upgraded to Windows 7.I tried the Lenovo diagnostic check for the touch screen, and during the test, it only responded to the pen.What should I do? Is there a certain driver i'm missing or need to uninstall and then re-install?Thanks in advance.

Answer:Post Windows 7 Upgrade - Touch Panel Not Responding to Finger Touch (x200t)

Ok...I think i really screwed something up. As per a Lenovo support tech's advice, i installed the Windows 7 "Enhanced" Multi-touch Driver, even though i do not have the enhanced multi-touch screen, and this is what it says on Lenovo's site about this new driver: "*1: ThinkPad X200 Tablet models with the Multitouch are NOT supported." "*1: ThinkPad X200 Tablet models with the ENHANCED Multitouch ARE supported." So, i go ahead and install it. I notice that finger touch now works, but the pen setting are now all screwed up! The eraser no longer responds when i turn the pen around to erase. It actually INKS with the eraser as well! OneNote no longer automatically starts inking (or erasing) when i bring the pen (or eraser) into range. I have to manually click on the pen icon (or the eraser icon) on the tool bar to use these functionalities! *groan* In the Tablet PC Input Panel: no eraser functionality (it inks instead!!) and even the button on the pen (which previously had the right-click ability) only inks when pressed down! I think i made my situation worse...Please Help! Adam

2 more replies
Relevance 65.6%

I have ThinkPad X230 Tablet. It used to have non-functioning touch screen. I did something, and now the screen responds to pen input, but it doesn't work properly for finger touch. When I touch with finger, only thing it does is minimize or maximize window. When I change position of taskbar (with start menu and icons), it doesn't maximize/minimize.  I think this means that when I touch with finger, cursor clicks at bottom right corner of display, where there is button for maximize/minimize window

More replies
Relevance 58.63%

I was informed by an X41 tablet seller on e-bay that  he was unable to use the X41 tablet by touching the screen  with the finger. Is this true? Is there some magic  to get finger touch working ?thanks

Answer:finger touch on an X41

Hi netbeans, welcome to the forum, afaik, X4* tablets didn't have this capability. Depending on model X6* tablets do.So if you want to give your tablet "the finger" it had better be an X6* tablet.

3 more replies
Relevance 58.63%

I've seen several posts on this but no working solution.  Can anyone point me towards a fix for the two finger tap on the Y50-70 Touch?

More replies
Relevance 58.22%

Hello every bodyi just bought an X201 tablet pcX201 3113-CF8after a clean install of win 8 64bits the touch screen didn't worki got no pen with it and i counted on using one/mutlitouch finger.i almost installed all the available drivers and tested all available solutions but it still don't workcould someone please help methank you













Solved!

Go to Solution.

Answer:X201 no finger touch and no pen

Did finger touch ever work? It looks to me like this is a pen-only model

3 more replies
Relevance 58.22%

Hi, I'd like to disable the two finger touch on my elan touchpad because it's very annoying. How can i do? With the factory installed driver the ELAN setting program was not working, so I installed many different versions of the driver, but every time I change the settings in the ELAN setting program nothing changes.I own a Inspiron 15 7000 series 7559 with windows 10.Thanks for your help.

More replies
Relevance 58.22%

Hello, I have a Thinkpad X61 (7762WFX) at work.  Then pen works fine, but I was under the impression that I should be able to interact with just my finger on the screen.  If this is indeed the case, how do I go about doing that.  I have updated the multitouch drivers to the newest. I am on Windows 7 Professional. Thanks! 

Answer:Finger Touch - x61 7762WFX

Hi rigwad and welcome to the community,
 
Some screens are pen only and some are pen and touch.
 
Go into control panel, system. About the middle of the page it will say pen and touch.  What does it say after that?  Does it say that you have pen and touch?
 
Dave 

9 more replies
Relevance 58.22%

Please help me my laptop hp 2740p touch not working pen touch is working good but no finger touch please help mei also goto device manager and there is no hid compilant touch screen drivers please any solution please post down thanks

More replies
Relevance 58.22%

I just purchased a x41 tablet pc but it didn't come with the pen.  I bought a cheap pen made for a iphone off ebay will that work. I have tried using my fingers to select things as well. No luck! Is there a special pen that "has" to be used???Or is fingers or cheap pen acceptable. If you are able to use your fingers or cheap pen how do i set it up to work? I'm using windows 7. Thank you!

More replies
Relevance 58.22%

Hi guysi did buy a  HP Elitebook 2740p and when i changed  windows The finger touch system is not working, but The Pen does work. It did install the drivers, i did update the firmwareWhat can i do?plz help me 

More replies
Relevance 57.4%
Answer:Stylus still works but finger touch does not after...

What model is the machine?

1 more replies
Relevance 57.4%

I am using windows journal a having problems that I can not turn off finger input when writing with a pen. The screen becomes insensitive to a finger when I am about an inch away from the screen with the pen, but this is not enough to avoid accidental dots and lines with your finger. Can one either configure the pen distance from the screen from which on finger touch is disabled? Or can one disable finger touch altogether? I have been following some discussions on forums providing some workarounds, but maybe there is a simpler solution around?138

More replies
Relevance 56.99%

We received a new X201 Tablet, but it seems that the screen will only respond to the pen input.  It will not read any input fingers.  I haven't found a way to turn this on...would someone please point me in the correct direction?  Thanks













Solved!

Go to Solution.

Answer:New X201 3093-CTO will not respond to finger touch, only pen

Nevermind, I see wee have a superbright display instead of the multitouch.

1 more replies
Relevance 56.99%

Hi, I have been baffled by this issue for quite a while now. I have a lenovo X220 tablet that supports both finger and pen inputs for touch. Originally this laptop came with windows 7 and everything was fine and dandy. I then bought windows 8/8.1 Pro 64-bit and did a clean installation of it. Now I only have pen support for the touchscreen, i.e. my finger is recognized as a pen/mouse not a finger which is really frustrating specially when scrolling. Now before I actually purchased the win8 license I had tried out the windows 8 release preview and everything worked perfectly then. So now when I got the actual release of the OS its not. Furthermore I currently have a dual-boot set up with windows 10 technical preview as my other OS and in there it also works perfectly fine as it should. This is important because when I contacted lenovo about the issue they suggested that my screen was broken, but clearly it is not.  Can anyone shed some light on this issue? It is a real shame not to be able to take advantage of this fine screen and windows 8 touch friendlyness.  Kind regards.

Answer:X220 Tablet pen support only no touch with finger

There is a firmware update for X220 tablet under win8 that improves didigitizer recognition.http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-tablet-laptops/think...

2 more replies
Relevance 56.99%

Hello!Unforutanley gestures like "forward" or "backward"(swiping with the finger to the left or right) to navigate one step back i.e. in the windows explorer or Firefox doesnt work.I can't get the gestures to work  If i try to learn the gestures (http://imgur.com/bPzQqGp ... Control Panel --> Pen and Fingerinput --> second Tab --> Hotlink, i will get the message:With the mouse button or with the finger it is not possible to perform gestures. Please use the tablet pen (translated from german to englisch).If I performs these gestures with the pen, it's possible. But it is so annoying....gestures with the pen arent very user friendly. Any tips?Thanks! 

Answer:No finger/touch gestures with x230t @ Windows 8

Hi, schlomm
 
What is the model number of your X230T? You should be able to find this information on the back of the system near the serial number. It should be in the format of XXXX-XXX, such as 3247-A2E.
 
Thanks in advance,
Adam 





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

5 more replies
Relevance 56.99%

I am in an IT department at a small clinic in Idaho.  We have several X220's and X230's here.   There are several machines that have issues with the touch screen just stopping.  Nothing with the pen/finger will work.  The mouse still works, but nothing with the pen. We created a script that restarts the TabletInputService, the docs would run this script when the pen stops working.  That script works a majority of the time, but not always.  One of our docs just received a brand new X230 Type 3435-2TU 2 weeks ago.  She pen has stopped working several times in that two weeks.  She said that script only works a few times.  She has to reboot for it to work again....so rebooting works.  We can't have docs rebooting 3-4 times a day. Does anyone know of a permanent fix for this? Please help!!Desperate IT Guy!!   

Answer:X230 Touch screen with Pen or Finger fails often

We just got 9 new x230's and some of them are doing the same thing. Did you ever get a resolution?

9 more replies
Relevance 56.99%

Hello, It seems like I need to press very firmly on some items for the finger touch to work. How do I adjust to have less of a firm press?

More replies
Relevance 56.99%

Hi all ! I got a X220 Tablet from a friend and i am very happy with my tablet.The only question i have which makes me crazy and i cannot understand is that i have no touch capabliity only through wacom pen works.The same issue was with windows7 pro preinstalled and with windows8 upgrade i did after getting the laptop.Is it possible that my X220 Tablet has a panel that only works with wacom pen or i is it a software issue so i can resolve it by installing it and have the finger touch capability. Thanks in advance !!!













Solved!

Go to Solution.

Answer:X220 Tablet - No finger touch capability only pen :(

there are two types of X220t and X230t screens used one is both touch sensitive and uses pen digitiser, there is another one that is outdoor screen version that is only pen digitiser (so there is no finger touch capability).

2 more replies
Relevance 56.99%

Hello everybody, this is my first post on this forum, from my first lenovo PC, so I'm truly a newbie. Just picked up my brand new x220t from a local reseller, and tried to configure it to fit my needs. During the process I realized I'm not able to configure the touchscreen nor use it. The digi-pen works fine though. 1. I've checked under Control Panel | Pen & Touch Devices. This window should have 4 tabs (the last on the right should read Touch), but it ain't there as if some functionality was missing. 2. I also tried to turn the touch screen on/off via Simple Tap. It does inform me that I'm about to switch the touch screen off (and as a matter of fact I'm not able to use it wth my fingers) but when I turn it on again the touchscreen still doesn't react to my fingers. 3. I've downloaded all the win7 as well as lenovo updates via the update managers, installed them and did a complete restart of the system - still no touchscreen. 4. Under device Manager I tried to find Wacom  devices, but couldn't find any. (the touch screen is a Wacom, am I correct?) 5. In despair I even started reading the pdf manual where one can read:  "Some models have the touch panel feature". This left me a little bit uneasy. Do ALL x220 convertible tablets have finger sensitive touchscreens? I have read the sticky thread about conventional vs. multitouch lenovo tablets, and I gather that the answer should be yes - all have finger input besides digi-pen. ... Read more

Answer:x220t - NYK27PB - no finger touch input

The models with the outdoor screen (the one that has a reinforced gorilla glass surface) don't have multi-touch, only pen support. If your model doesn't have the outdoor screen then it should have multi-touch support, if that is the case perhaps you should contact tech support? It's possible that it's just a hardware problem and needs replacing.  Also, the pen digitiser uses Wacom technology, as far as I'm aware the multi-touch system doesn't.

6 more replies
Relevance 56.99%

Hi, I'm new to the tablet and experiencing that even when I turn off the "Touch pointer" in control panel, the cursor is always above my finger about 1 inch.  This makes it is very hard to navigate and I cannot even open the Start menu at the bottom.How do I change this behavior? Thanks for your help!

More replies
Relevance 56.99%

Hi,

I have a Portege M780 and Windows 7 x64.

My laptop recognizes the pen and one point touch devices.

I can use the pen fine, no problem with this. But finger touch screen doesn?t work. I go to control panel and finger touch is activated.

I download Wacom dual touch drivers for W7x64 from Toshiba?s support web, but I can?t install it because when I try it says ? not supported platform ?.

Someone could help please?

Answer:Portege M780 finger touch not working

I download Wacom dual touch drivers for W7x64 from Toshiba?s support web



Where did you find this 64bit driver?
The Toshiba European driver page does not provide Dual touch driver for Win 7 64bit but only for Win 7 32bit

7 more replies
Relevance 56.99%

Hello everybody, Just bought new x220 tablet (4294CTO), and tried to configure it to fit my needs. During the process I realized I'm not able to configure the touchscreen nor use it. The digi-pen works fine though, but finger touch does not function. I have check model description on Lenovo site it's said clearly Multi-touch 5 finger display, not outdoor, download all updates from Lenovo - no changes. What steps do I need to take in order to get this touch functionality up and running? Thank you in advance.

Answer:x220t - 4294CTO- no finger touch input

Same model and same problem with you after upgrade from win7 pro to ultimate. Wait for solutions

3 more replies
Relevance 56.99%

The multi-touch screen is suppose to register 5 fingers right? Mine reports only 2 under the computer properties page in win 7. Is this normal, or do I have something wrong?   





-If this post was helpful maybe consider giving me a kudos for it.Thinkpad x230 -i5, 16gb RAM, 240gb SSD, 500gb 7.2k hdd, win 8.1 proThinkpad x220t - multi-touch, i7, 16gb RAM, 80gb SSD, 320gb 7.2k hdd, win 7 pro 64

Answer:Multi-touch screen finger count

multi-touch does not mean 5 fingers.  It depends on the hardware.  In the case of X220, multi-touch means 2 fingers.

4 more replies
Relevance 56.99%

I hope I'm not making a mistake, I have a 6364-BV2, I assume it's multitouch (as long as the pen works, should finger touch work as well?) and I'm not able to use my fingers to touch anything on the screen. It's the low-rez version... I tried installing the multitouch driver but for nothing... I have xp tablet edition... Is it possible that my tablet doesn't actually have multitouch (finger touch capability) and only the pen is supposed to work? Thanks

Answer:x60 multitouch issue: finger touch won't work

Not all screen are multitouch capable, the pen have a special proximty device that the sensors on a layer on top of the screen picks up, unless the screen also has an additional sensor sheet for your finger, it would not work with your finger... There are two types of screen option one is Multitouch and Non-multitouch in the XGA format, and SXGA format is definitely non multi-touch.  

8 more replies
Relevance 56.99%

I am a corporate user and just upgraded from an X61 tablet to an x200 tablet and are slowly exploring the new features. The specs as given to me are that this is a x200 7450 RZ1, but I can not find anywhere on the web what the exact specs are. So question is does this machine have finger touch and or WWAN on board. Finger touch did work for 2 minutes but will not return.  I have browsed the web but can only find a driver for Vista. Please help  

Answer:finger touch does not function on x200 under windows XP

Try this:Lenovo Fingerprint Software for Windows Vista 32 bit and XP 





ThinkPad X200s + LED | SL9400 | 4GB DDR3 1066 | 500GB Momentus XT | Intel 5350 WiMax | BT & FPR | 9-cell | Win7-x64 & Linux x64 | Ultrabase ThinkPad E10/Edge 11 | K325 | 2GB DDR3 1066 | 320GB 5400

3 more replies
Relevance 56.99%

hello, i have the x201 tablet 311396u and i cannot get the finger touch to work,  it says in system properties that i have pen and touch and in the control panel tablet settings it says it as well.  but when i go to calibrate the finger touch nothing happens...  i have even updated the driver through the lenovo site,, any thoughts??

Answer:lenovo x201 pen works but not finger touch

hey them0dster,could you uninstall the following :TrackPoint DriverUltraNav (Trackpoint + Touchpad) UltraNav UtilityOnce done, reinstall the above starting with the TrackPoint Driver first.http://www-307.ibm.com/pc/support/site.wss/MIGR-70656.html





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

4 more replies
Relevance 56.17%

I have an x201 tablet and often use the pen with One Note. With Windows 10, it is impossible to lift the pen the slightest bit off the tablet without reactivating finger sensitivity. The result is that I get a bunch of scribbles from my hand touching the screen, and also inadvertantly hit other tabs etc while trying to write.Any suggestions?

More replies
Relevance 56.17%

Hi I finally decided to upgrade my 4 year old Ideapad Y550 and I am quite happy with my U310 so far. One thing I would like to change though, I've gotten used to one-finger scrolling using my Y550 and I would like to have that back. Is there any way in the U310 to chage to one-finger scrolling from two-finger scrolling? Thanks!













Solved!

Go to Solution.

Answer:Ideapad U310 Touch single finger scrolling

This is based on the Elan touchpad. Do you think the one finger scrolling is similar to the edge swipe? Maybe its not enable. Two or more finger scrolling is under multifinger configuration menu. But there is no scrolling option in One finger menu but only the edge swipe option.

9 more replies
Relevance 56.17%

Upgraded simple pass soft ware and since then says that the finger print reader not connected though on start up the finger print reader does flash but if I swipe my finger over it just stops. it doesn't flash at any other time than start up. Gone into device manager and up dated reader driver for it but made no difference also in device manger is says it's operating ok.  Help please?

More replies
Relevance 56.17%

My finger print reader failed and a Lenovo support tech installed a new replacement. Now my PC won't start from the finger print reader although it works fine after I hit the start button.  I have had a few calls with the telephone service people and no one is able to address this problem.













Solved!

Go to Solution.

Answer:Can't start X1 Carbon touch from finger print reader

Hi Lebouitz,
 
Welcome to Lenovo Community Forums!
 
I?m really sorry to hear that you are not able to start your Lenovo X1 carbon Touch using the fingerprint reader.
 
I would suggest you to try the following steps.
 
To enable power-on passwords replacement:

Login as administrator.
Start Fingerprint Software.
Click Settings.
Click Authentication.
Check Always show power-on Security Option if power-on passwords are not set.
Check Use fingerprint scan instead of power-on and hard drive passwords.
Check enable single sign-on capability if you want to boot from power-on to windows without further fingerprint swipe or passwords.

 
Spoiler (Highlight to read)
 
To enable power-on replacement for fingerprint swipe:

Start Fingerprint Software.
Authenticate with password or enrolled fingerprint.
Click the Power-on slot on the top of the enrolled fingerprint.
Close Fingerprint settings and shutdown system.
On the first reboot you will be asked for your password and fingerprints. The second time you reboot it will only require your fingerprint.

Spoiler (Highlight to read)
 
For further information regarding fingerprint reader, refer the below link.
 

Fingerprint Reader tips

Let me know how this goes!
 
Best Regards,
Mithun.
 





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! ... Read more

3 more replies
Relevance 56.17%

I have tried updated the drivers on lenovo's website to no avail. Im currently using win7 prof. I have also tried using the thinkpads system update software and it still does not work. When i go try and calibrate the screen both finger and pen have no response on the screen. I have checked the system device manager and there are no conflicts. Please help!

Answer:X201T 2985-F4U -- Both finger touch and pen not working on screen

Hi and welcome to the forum!

The tabook says your model has multitouch (i.e. both pen and finger touch). Is this a new system you bought? If so, did you buy directly from lenovo? Did the touch ever work?

Try to install the following driver:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-74908

If the driver installation doesn't help, subsequently try Windows Update, look particularly for Touch Input driver, if even that doesn't take you anywhere, then give factory restore a go (after backing up your data), to do so, press ThinkVantage button on boot to access Rescue and Recovery, and choose restore to factory contents in the following wizard. Note that factory restore is only available on lenovo preloaded OS.

Keep us posted.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Espaņol Visit my YouTube Channel

2 more replies
Relevance 56.17%

Hi all,
I'm currently operating with a Dell Latitude (E6410) running Windows 7 32-bit. I have the default Alps touchpad built-in, and was recently ecstatic to find the driver for multi-touch on the Dell Support page, something I figured I'd never get privileged to since this doesn't have a Synaptics touchpad.
Everything works as it;s supposed to, as far as the options go under the Dell Pointing Devices menu. However, I noticed that two-finger options are missing, specifically a two-finger right click. This is odd, seeing as there are plenty of other two-finger options, and since two-finger right click has become a standard with multi-touch touchpads.
So my question is, is there anything I can do to get two-finger right click? I don't see any options officially provided by Dell, so I'm totally okay with installing software or drivers from somewhere else, as long as they work. I haven't been able to find anything myself, as it seems every driver and software in the world is developed with Synaptics in mind.

Answer:Two-Finger Right Click with Dell Multi-touch Touchpad?

I have the exact same question. I see that this was posted 3 years ago without a solution / reply :(

2 more replies
Relevance 56.17%

Hello,Recently my brother bought a refurbished x230t type 3437-XE1.Spec: windows 7, processor i7, 8gb ram. Since I tried it today, I was never able to get the finger touch to work (no tablet touch screen function at all), but  the stylus pen seems to work perfectly.Also, the simple tap gesture (double clicking with two fingers on the pad) doesnt seem to work.I dont know whether some settings are not correct or the refurbished product has its faults. Please assist me in how to solve the problems.thank you. 

Answer:x230 tablet finger touch doesnt work since I got it.

leevshan wrote:Hello,Recently my brother bought a refurbished x230t type 3437-XE1.Spec: windows 7, processor i7, 8gb ram. Since I tried it today, I was never able to get the finger touch to work (no tablet touch screen function at all), but  the stylus pen seems to work perfectly.Also, the simple tap gesture (double clicking with two fingers on the pad) doesnt seem to work.I dont know whether some settings are not correct or the refurbished product has its faults. Please assist me in how to solve the problems.thank you. The Gorilla Glass model of the X230t does not offer touch.

2 more replies
Relevance 56.17%

How can I do, Eventhough I try to in stall ISD Driver or anything else. Anyone can give me the recommendation?

Answer:Please help I just unpacked X220t but the Finger Touch Function is not work

did you get a X220t with Multitouch?

5 more replies
Relevance 56.17%

Few issues that have popped up in the last few days after some Windows updates 1) Two finger scrolling stopped working2) Touchpad will randomly stop/start working, as in I can't even move the cursor. When I restart the machine the two finger scroll will work then stop somewhat randomly

Answer:u430 - 2 finger scrolling and other touch issues on Win10

Dear ldevine,
 
Welcome in lenovo community,
 
Please try to uninstall the touchpad driver from the device manager, and install the below one please.
 
https://download.lenovo.com/consumer/mobiles/0vu102af.exe
 
Regards,
Joseph

1 more replies
Relevance 56.17%

I ordered my x200 tablet on cyber monday nov 30th, but i am not sure is my screen multitouch like iphone or not. Estimated shipping date was dec 8th, but has been delayed to dec16 In my order, monitor spec :44C5631  SBB 12.1WVSBRLEDWXGALCDPPLEDCF Can anyone tell me if this is multi touch screen? if not, can i ask them to correct my order to multitouch?  Thanks for your help in advance  Max

Answer:Is my x200 tablelet multitouch screen (two finger touch?)

Just got mine with the same part number 44C5631 ... NOT HAPPY.    And I'm afraid you won't be either. No you don't have ENHANCED MultiTouchAs a matter of fact, you don't even have MultiTouch. Much to my dismay, this part number is for a DIGITIZER-ONLY screen. ARGH!!!!   I talked to sales endlessly to get this right when I ordered ... and they STILL send me the wrong one.  It's like they do it on purpose ;-) .... Unreal.

5 more replies
Relevance 55.76%

I'm befuddled. Two finger scrolling in Windows 10 dialogs, applications and Internet Explorer/Edge all works perfectly. However, Chrome is far too sensitive and the page blazes past. I can't adjust the scroll speed in settings because that affects all other apps (in other words they'll become way too slow!) Just to make matters more confused I've also got a Logitech mouse and the scroll wheel works fine everywhere - and this means if I install an extension in Chrome to configure scroll speed to work with the touchpad I will have slowed it down to a painful rate using the scroll wheel. Any clues how to configure Chrome two finger scrolling correctly? Is this an issue with the trackpad or Chrome?

More replies
Relevance 55.76%

Hello. I have a Lenovo Yoga 2 from work and we use it to get customer signiture on a web browser page for the company I work for. however lately. when a customer is trying to sign in the signniture box, it just move the whole screen around in a similar way to moving the screen with your finger. the only way it writes is when you hold the stylus down for a scond or two and then write without lifting it. but every time it leaves the screen then the same problem happens again. I tried to fix it from the touch screen settings but nothing seems to work. and advice on fixing this is greatly appreciated.

More replies
Relevance 55.76%

Hi guys I have not been able to use the touch screen functions for about a month now.  the pen works fine ,  but the finger touch go nuts after a few minuts. in theose few minets the screen start to missed up ,  and the touch finger do what ever he wants on the screen  you can see a lot of finger touching everywhere. what can be the problem? do i need to replace the screen? or it's driver problem?.. Any suggestions please. Thank you in advance! Dan.

More replies
Relevance 55.76%

My 7840's touch pad "One Finger Scrolling" functionality has become inconsistent.  It had been working fine by using the 'DellTPad.exe' application and selecting (if memory serves) 'one finger gestures'.  That option is now gone however one finger scrolling still works for awhile, and then fails and the only option to scroll using two fingers. A reboot fixes it for awhile then it starts all over again.  This problem coincided with a recent round of updates, though the touch-pad driver was not one of those updates. 
Any ideas out there?

More replies
Relevance 55.76%

I HAVE A X200 TABLET 7449-9EU IM TRYING TO FIND OUT IF THIS MODEL IS FINGER TOUCH COMPATIBLE IF SOMEONE CAN POINT ME IN THE RIGHT DIRECTION I WOULD BE GRATEFUL.

Answer:X200 tablet how can I find out which models are finger touch compatible

Well I would say that the most empiric way to do it is just try to touch your screen on some dialog boxes or pictures where gestures would trigger a reaction from the computer..... Indeed it's not very easy to figure it out from Lenovo support website ... I tried the product number but this only gave back basic characteristics of the machine, not the exact type of display/screen  I know mine is wacom enabled and (finger) touch compatible and I think I figured this out by... trying  http://shop.lenovo.com/us/landing_pages/multitouch_technology

2 more replies
Relevance 55.76%

Just 2 days ago, a Lenovo staff on chat said that the X220 Tablet with Outdoor Display supports touch inputs but only for single finger actions.  He was very sure but then several posts on this forum seem to indicate that it has only the pen input. Can someone please confirm? 2. If the Outdoor model supports single finger input, is the display capacitive touch? 3. On the Multi-touch model, will the 2-finger scrollling, 5-finger gestures, etc. work in every application or is it application dependent? Thanks much for your help.  

Answer:Lenovo staff says Outdoor Display is one-finger touch activated

I have the Outdoor as of yesterday, and it is not a touch screen.  It is Pen input only.  Can't speak for the multitouch models. Cheers,Gigs

2 more replies
Relevance 55.76%

How can I turn off mini scrollbar when scroll using two finger in synaptics touch pad? It is very irritating even when I finished scrolling and want to move cursor to another place, it sposmadically continue scrolling  frequently.

More replies
Relevance 55.76%

cant seem to find out how to turn off the 2 finger touchpad zoom option

Answer:touch pad 2 finger zoom option on my laptop is driving me nuts!

Search "Mouse" in start menu, after the dialog window opened, go to the right most tab.

2 more replies
Relevance 54.94%

i guys im new in the form. i ve got a lenovo x201 tablet.im wondering about the multi touch option.Does x201 tablet 3113-94U support multi touch or only pen. And also i coudnt find my model type in lenovo.thats kind of weird Thanks for everything

Answer:lenovo x201 tablet 3113-94U support multi touch??(pen & finger)

Hi, btoymus23
 
I did some research on your machine and found its entry in the Personal Systems Reference. Machine type 3113-94U does not support MultiTouch, unfortunately. This information can be found in the link on page CML3-4 (use Ctrl+F to find it faster.)
 
MultiTouch, however, means to be able to use three distinct points on a touchscreen at once, not being able to use different touch inputs. I think you should be able to use your fingers to touch objects on the screen, though the pen might be easier.
 
Hope it helps,
Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

2 more replies
Relevance 54.94%

Hello every bodyI just bought an x201 tablet pcX201 3093-bf8After a clean install of win 7 64bits the touch screen didn't workI got no pen with it and i counted on using one/mutlitouch finger.I almost installed all the available drivers and tested all available solutions but it still don't workCould someone please help meThank you 

Answer:lenovo x201 tablet 3093-bf8 support multi touch??(pen & finger)

3093-bf8 does not appear in the tabook reference so it was probably a custom build. Most X201 tablets do not support finger touch, but you can find the screen FRU by entering your serial number here: http://support.lenovo.com/en_US/product-and-parts/partsLookup.page

2 more replies
Relevance 52.89%

Hello,
I recently purchased an XPS 15 9560, Windows 10 and am having the trackpad dead zone issue (the pointer does not move until I move my finger about 1/4"at which point it has perfect response / tracking / precision). Each time I start to move the pointer using the trackpad I must go through the dead zone prior to the pointer responding normally. The dead zone appears to be a circle around the spot that I touch the trackpad.
When I disable the HID trackpad device in device manager, this dead zone problem is eliminated. Is there a way to access the trackpad driver registry settings to see if there is something I can change that will eliminate the dead zone?
Alternatively, is there a way to find out which trackpad brand I have that will allow me to try a different driver? I tried the Synaptics fix but I was not happy with the two finger scroll performance even after changing the registry settings.
Thank you,
Joe

More replies
Relevance 48.79%

every few hours or every other time i use the computer for only 2 minutes or 1 minute it will behave eratically and start reading 2 and 3 fingers on the trackpad and suddenly start and suddenly stop as if it is not a warming issue or heating issue. rather a driver or software issue i have pdated driver played with settings and this still happens every so often i want to return my computer but i got a killer deal with the i5 but the trackpad glitchyness is too important of an item to just "deal with" does lenovo know about this a few other people i have found online have same issue.

Answer:g50 70 trackpad eratic behavior glitchy choppy reads 3 finger and 2 finger

A couple of things to try......
 
First, try doing a reset of the BIOS by following the procedure I have listed below.  This procedure can help at times resolve hardware conflicts that maybe affect the way the system performs.  Just do this......
 
1. Unplug the charger / adapter. 2. Remove the battery. 3. Press and hold the Power Button for 15 seconds. 4. Re-install the battery, plug in the charger / adapter if needed and power up the system to see if the problem was resolved.
 
If the reset didn't resolve the issue then I would next suggest that you uninstall the touchpad driver, reboot the computer and then install a fresh copy of the driver.  A clean install is the best way to try and resolve driver related issues. 

3 more replies
Relevance 48.79%

I bought my Flex 2 14 a couple of weeks back.I want to enable Two-finger tap (not click) for right click.. Unfortunately it does not work.Weirdly, Two-finger DOUBLE tap works for right click.. How do I get a two-finger tap? I tried the regitry hacks from here (https://forums.lenovo.com/t5/Yoga-Flex-Laptops-and/Yoga-2-Pro-Two-finger-tap-does-not-work/td-p/1406... but no luck yet. Any help please. 

More replies
Relevance 48.38%

Yoga thinkpad 20cd. I have the original stylus that came with the lap top as well as an aftermarket LIfebook stylus. The screen doesn't register either stylus. When i go to the windows pen calibration the stylus works fine. The calibration consists of tapping targets with the stylus pen. It is very accurate. Soon as i close the calibration window the stylus doesn't interact with the screen at all. I assume I must have changed some setting by accident or it occurred with an update. The stylus use to work a few months ago. I have tried messing with my display settings to remove the adaptive brightness at one point and may have selected a wrong setting. Thank you for any help provided. 













Solved!

Go to Solution.

Answer:Touch screen not responding to stylus only finger. But in stylus calibration, the stylus works fine.

SOLVEDOpened Wacom Pen and restored to default settings. started working again. Never have opened Wacom pen before, not sure why that worked. 

1 more replies
Relevance 47.97%

I just upgraded my Yoga 2 Pro to windows 10 and my touchpad was acting crazy--for example, I could only get a window to scroll when it was out of focus.  I tried reinstalling my touchpad drivers, and it took about 5 attempts to get it working at a basic functionality.  However, this process caused an egregious change to basic scrolling behavior.  When I used to scroll with two fingers, I could stop scrolling by lifting one finger, and my mouse would return to being a cursor.  Now, when I lift one finger, it continues to scroll, and it will only stop scrolling once I lift the second finger.  So if I'm moving my cursor around, and I drop a finger down for just a brief moment, I won't stop scrolling until I completely remove my hand from the touchpad. I tried reinstalling the driver, I tried installing the Lenovo Windows 10 touchpad driver, (64-bit)

Answer:Y2P: Two Finger Scrolling Doesn't Stop After Lifting One Finger

I have the exact same issue and I've played with every single setting but still no solution. Were you able to find a solution? Or have you still been using it that way for the past three months?

1 more replies
Relevance 47.97%

Hi,

I have a Portege Z30-A-183.
First I used it with W7 and I saved 3 fingers in the biometric finger sensor .

After that I updated to W8.1 but I didn't deleted the data of the scanned fingers.

In W8.1 I haved triy to save again the data of my fingers but the software said that it is not possible beacause in the memory of the sensor are the data of my fingers.

I haved read that these data are in a non volatile memory on the sensor.

How I can erase this data?

Thanks

Answer:Portege Z30-A-183 - Erase Finger data in Finger Sensor

Hi

Yes the fingerprint information is not saved on the Hard Disk Drive (HDD) of your computer but on the certain chip.

Usually the fingerprint has to be removed using the Fingerprint Utility but if this will not work after the new OS installation, I would recommend you to go back to the previous state before changing the system and to use the fingerprint software which was used for fingerprint registration.

Details here:
http://www.mytoshiba.com.au/support/items/faq/386

But in case the fingerprint would not work even using the Win 7 version, I think that only Toshiba authorized service provider would be able to delete the already registered fingerprints.

8 more replies
Relevance 47.97%

I just bought a Yoga 3 14" and I have an issue with the touchpad: when I use the two finger scrolling function, it doesn't stop scrolling unless I lift both fingers off the touchpad. All other notebooks I have used before stopped scrolling when I lifted just one finger, alowing me to resume controlling the pointer with just one finger. This is very annoying, and I would like to know how to change this behaviour.
 
Thanks
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

More replies
Relevance 47.15%

So.. why is it that everything in Windows 8 with a horizontal scrollbar is double finger scroll??? Except the home screen... I can do one or the other but consistency of it would be nice.

Is it a setting or is it one of those, "It is what it is..", kind of deals.
 

Answer:Windows 8 Double Finger vs Single Finger

Why slide to unlock with a mouse? Why the mix of horizontal and vertical scrolling? Why are buttons buttons sometimes and random bits of text other times?

I think it's because a bunch of different people made it. People who don't really talk to each other.
 

8 more replies
Relevance 47.15%

After using two finger scrolling, I lift 1 finger up so I can use the mouse pointer but for a second it continues to scroll instead of being able to use the pointer. Anyone have this issue?

More replies
Relevance 43.87%

3000 N100, the finger print device can not be found when trying to set up profiles.  The computer had been restored to new state using the function key at startup. I deleted programs I did not want after that but the Think Advantage was left as is, I believe.  I can get as far as trying to create finger print profiles, then I get the finger print device can not be found. I am XP SP3 E/.Message Edited by EmClark on 05-19-2009 10:42 AM





Tinkering All The TimeE/.

Answer:Finger Print Device not found using Think Advantage Finger Print Software

Solved...I downloaded the updated Fingerprint software from the driver page and that fixed it.





Tinkering All The TimeE/.

1 more replies
Relevance 41%

This morning, I decided to make the jump to Windows 10 from Windows 8.1, and I have to say, the design looks simpler to use, but this new OS software has done something with my touchpad. Originally, on my Windows 8.1, I was able to scroll through whatever web pages or folders in my computer with one finger using my touchpad. With this new update, initially, I thought it broke my touchpad completely, but the problem has been narrowed down to having to now use two fingers to scroll in the most awkward way as this touchpad doesn't seemed to be designed for two finger scrolling. Is there a way for me to change this back? Would I have to revert back to Windows 8.1 to get my one finger scrolling back?

The laptop I am using is a Gateway NE56R34u, and the touchpad is an ELAN. Any and all help would be much appreciated.

Answer:How to change from two-finger scrolling back to one-finger scrolling?

Would Gateway drivers for their touchpad be one area to explore ?

I was looking at a Logitech touchpad, and it appears their drivers are what controls the response/numbers of fingers/digits.

1 more replies
Relevance 37.72%

I know that you can play games like XCOM and Master of Orion II on a touch screen laptop, though I was wondering: can I play something like XCOM, while still using touch to play the game?

Answer:Can a touch screen laptop play non-touch screen games...with touch?

I play World of Warcraft which was definitely not designed for touch screen and can interact with the interface just fine on my yoga.

1 more replies
Relevance 36.9%

Hi, I have just upgraded to 8.1 and the only issue I have so far is the not working multi-touch gestures function. No more scrolling with two fingers, no more pinching to zoom in and out from the photos, NO MORE FUN  Also the touch keyboard has been very annoying.. It has been popping up all the time when i am using the computer in 90 degree position. Happened since before the upgrade though. Does anyone have an idea? (I don't want to disable it, I use it sometimes!) My poor Yoga, can someone please help :'( Thanks in advance!













Solved!

Go to Solution.

Answer:Yoga 13 Win8.1 no more multi-touch gestures and touch keyboard pop up all the time with no reason

Does it work if re-intall touch driver?

9 more replies
Relevance 36.9%

I just encountered this problem, it seems like an issue with the touch screen driver. When a monitor is connected via VGA and that monitor is made the primary display, whenever I touch the laptop screen, the click indication appears on the wrong monitor. Is there a driver update that fixes this? Who should be notified? What company made/supports the touch screen?

Answer:W510 touch registers on wrong monitor when touch screen not primary display

hey MRX,regarding this, really hard to say what could be the cause.curious to know, the external monitor which you are using, did it by any chance some with its own drivers ? also have you tried reversing and placing the external monitor as the primary ? does it make any difference?





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

4 more replies
Relevance 36.9%

Hi I bought a Acer ICONIA 6120 Dual Touch Screen Laptop in 2011 when I was in US. I returned to India in 2011. In 2014 the bottom touch screen virtual key board started mal-functioning. The keys will automatically click making it unable to use. I gave it to a local technician he disabled the bottom touch screen. He also said the Hard Drive is corrupted needs replacement. He replaced with a new 500GB hard drive. While replacing it he changed the Windows 7 home premium to Windows 7 ultimate. From then on we were using it with a wireless key board. Now I am trying to repair the laptop. 1) Where can get 14" bottom touch screen so that I can buy and install 2) Where can get the recovery disks along with windows 7 home premium Thanks in advance for your help

Answer:Acer ICONIA 6120 Dual Touch Screen - Bottom Touch ...

I suggest that you first try to recover the laptop to factory-fresh Win7 home premium by purchasing the Iconia 6120 recovery media. This may help resolve the bottom screen issue. If you aren't in the US, please click on support at the top of this page. Choose the country. Then click "get support". And then choose contact acer for tablets. You should then get phone numbers or email addresses for Acer representatives who might help arrange for you to get this media.  Jack E/NJ

1 more replies
Relevance 36.9%

This has a built in CPU (i5) with Win7 32bit installed. The IDS touch screen was working fine, the it stopped
working. The thing is, the Touch screen calibrates fine using Elo calibration software for spotting the corners of the screen but when you do the mouse check, it does not recognize moving the cursor or selecting anything. I suspect a Win7 problem so where would a good start point be?

Answer:Elo 55" Interactive Digital Signage Touch Computer touch problem

Without knowing much about your system, I would say the first thing to look at is maybe update or reinstall your drivers.

2 more replies
Relevance 36.9%

Received my ThinkPad Yoga today - i7 ? 8 Gb - 256 Gb SSD - Win 8.1 pro ? One major problem ? the touch screen stops responding to finger intermittently. It always responds to the stylus. Updated all the Lenovo drivers and did Windows updates. When it stops responding, the only way to get it to work is by doing a shut down ( restart does not work ). Read the forums and disabled and enabled HID-compliant vendor-defined device. That did not make any difference. Is this a common issue and is there a software fix for it or is it just a faulty screen?

Answer:Thinkpad Yoga 20CDCTR1WW - Touch Screen not responding to touch - intermittent

Hi Waferthin,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that you are facing the issue with Touch screen on ThinkPad Yoga.
 
To resolve the issue please follow the below troubleshooting steps.
 

Remove the Wacom touch gesture driver in the device manager and make sure to check "uninstall driver" when you do so otherwise the touch will stop working again a minute later.
And after that restart the system and the touch screen driver will automatically install.
In services.msc restart human interface device service to run automatically.

Hope this helps! 
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

5 more replies
Relevance 36.9%

Hello, I have the TOSHIBA Satellite U400. Everything is going great but I have a few concerns.

1. The Touch Panel (Media Buttons on top of keyboard -mute-media-play/pause-stop-rewind-forward-) turn
the computer ON if touched! How do you stop that from happening? I only need to use the POWER button.
Power button is enough.

2. The MUTE button on the Touch Panel does not actually "mute" or "unmute" sound. Instead, all it does
is turn the White Glow Light for the entire Touch Panel ON and OFF (including the word "SATELLITE").
How do I make it do its proper function?

3. When logging into Windows, I get to choose between Password or FACE RECOGNITION. How do I
set it to FACE RECOGNITION only without having to choose it?



Thank you,

SAL : )

Answer:Satellite U400 - Issues with touch panel, touch and media buttons

It seems like there may be a problem with the buttons, I would send the system to an ASP for repair.

2 more replies
Relevance 36.9%

This happened suddenly like a month or two after the laptop went out of warranty!!! I've reinstalled, recovered, reset, and updated to no avail...must be a hardware issue -- 'cept I didn't drop this or anything!!! Pls. advise; thanks....

More replies
Relevance 36.9%

My Ideapad P400 Touch with Windows 8 is no longer responding to right side swipe (charms bar gesture).  All other touch screen functions and gestures still work normally, including the left side swipe to switch apps.  The screen still displays the 'touch feedback' dots when I attempt the gesture but no charms bar appears! I've tried recalibrating as well as removing calibration of touch screen, and tried various other troubleshooting procedures I found on this site, like uninstalling recent updates, etc... Finally I tried running Windows 8 PC refresh, which worked as it's supposed to so I got to reinstall all my software but didn't fix the missing charms bar! Has anyone had a similar problem with the touch screen right-side swipe and been able to fix it?  Any help would be greatly appreciated!   Thanks!cait 

Answer:P400 Touch - swipe gestures (on touch screen) stopped working

ccd8 wrote:My Ideapad P400 Touch with Windows 8 is no longer responding to right side swipe (charms bar gesture).  All other touch screen functions and gestures still work normally, including the left side swipe to switch apps.  The screen still displays the 'touch feedback' dots when I attempt the gesture but no charms bar appears! I've tried recalibrating as well as removing calibration of touch screen, and tried various other troubleshooting procedures I found on this site, like uninstalling recent updates, etc... Finally I tried running Windows 8 PC refresh, which worked as it's supposed to so I got to reinstall all my software but didn't fix the missing charms bar! Has anyone had a similar problem with the touch screen right-side swipe and been able to fix it?  Any help would be greatly appreciated!   Thanks!cait If you use an external mouse and move the pointer to the right will the charms bar appear?

9 more replies
Relevance 36.9%

Hi, I have the Lenovo X1 Carbon Touch, new as of april 2014, and since last week, the touch screen has stopped responding to touch inputs. Before this it has been working and behaving perfectly. I have tried to turn the laptop entirely off and on, reboots... No effect. The screen simply acts like it never was touch. The HID driver is present and claims to be working. I tried to reinstall it and it does so with no errors or warnings. I also tried to reinstall the monitor and graphics card drivers. The Tablet control panel icon offers a calibrate option but Reset is disabled. The calibrate doesn't help because it doesn't respond to touch. System says it has touch with 10 finger inputs. Windows 8.1 Update 1, Enterprise SKU Any advice is welcome. UPDATE! Touch works when I lay the screen out flat. But if I return it to any angle, it stops working. Is this related to LayFlat mode or is there a connection fault in the display for touch input so only when I lay it flat it has contact? Software or hardware?

More replies
Relevance 36.9%

Drivers all show working properly. Not intermittent. Tried settings and no help. No response when touching screen at all. Can't calibrate. Bios has no update available. Nothing in manual under troubleshooting. Any quick fix suggestions have likely been tried, but open to all ideas. If all else fails, and assuming the digitizer is bad, what does repair entail and any rough estimate?Is there any recall? I see this issue on the forum a lot with not many folks getting it resolved.TIA!!

Answer:U310 IdeaPad Touch :The Touch Screen Stopped Working. No Previous Posts Have Helped.

hi c2nah777,
 
Welcome to Lenovo Community Forums!
 
Have you tried booting the system in Recovery Mode (One Key Recovery), You're not going to Recover the system since your only going to check the touchscreen in that mode "Outside Windows"
 
See if the touhcscreen works there,
If Yes, I would suggest doing a factory Reset First Before jumping into a hardware Repair.
If No, Then I think you're correct with the digitizer.
 
Regards
Solid Cruver





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 36.9%

My touchpad is not functioning properly. It suddenly would not allow right click function, and i no longer can scroll up and down. I have tried updating and restarting , it still has not worked. Also the right hand side of the touchpad seems stiff, it is not clicking as it used to. Please help, as i have no one hear or in my visinity who knows how to fix lenovo laptops.

More replies
Relevance 36.9%

My Ideapad S415 touch screen has suddenly stopped working.  I've had a tech connect to my PC and try a BIOS reload of default settings, plus unistalling all "HID" devices in Device Manager with no resolution.  I've also tried a system restore with no luck. The system properties does see the touch capability. Suggestions? Thanks.










Solved!
Go to Solution.

Answer:Ideapad S415 Touch - touch screen stopped working

hi Hersh,
 
Welcome to Lenovo Community Forums!
 
First do a Power Drain 
     (If the battery is removable)
            Remove AC and Battery and hold the power button down for 15 sec.
               Turn the computer back on and see if the Touch capability is now detected under System Properties,
                  If not
         I suggest you contact Lenovo Technical Team about the Issue as this may be a device detection issue.
       Lenovo Technical Team
 
Regards
Solid Cruver



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Relevance 36.9%

My Lenovo U410 Touch recently got damaged - the hinge broke causing the touch screen to **bleep**.I was told that a repair was not feasible as none of the repair shops near me were able to source the parts needed.I therefore bought a new laptop. However, there is a lot of data on the old laptop that I want to access, including sorting out the licensing of MS Office (by uninstalling from the old one).I cannot do anything about it as the old machine is completely unusable as due to the touch screen being cracked, it seems to think it is constantly being touched in multiple places on the screen. This means that I cannot access the laptop to copy the data or uninstall Office. Anyone know any way around this that doesn't involve taking it to a repair shop to "recover" my data. Cheers

More replies
Relevance 36.9%

My wife uses the Lenovo U430 laptop. When she's using the touch screen, and she touches on an area, it will occasionally zoom in on that area instead of "clicking" what she's touching. This is annoying her (and me) to no end. This does not happen when she uses the touchpad. How can we stop this from happening?

More replies
Relevance 36.9%

I have a T43, one day  i cleaned the fan but then found its left button of touch pad and touch point doesn't work  anymore, i tried switching the left and right button funtion on the OS and then the left still doesn't work. Firstly, i think it may because wrong connection, so i detach the cover and reconnect all connectors...but soon find the Wireless Adapter which is fitted under the touch pad doesn't work well...Once i installed the driver for WLAN,  the OS is frozen and even i disabled the WLAN from OS, the OS is still forzen frequently.  Now i have to install a new OS and don't install drivers for WLAN, in addition, The LAN adapter works well.  During the reconnection, i cleaned the gold finger of WLAN using IPA...is it the root cause? wish sb can help me.

Answer:touch pad and touch point left button doesn't work,T43

Cleaning the WLAN shouldn't have caused the problem.  Recently someone posted on this site or thinkpads.com with a similar problem.  Do a search on both sites.





KeithFormerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891Currently T420 4177-CTO, T430 2347-A54, T430 2349-L64, T430 2347-UN9, T430 2342-CTR, Ideapad K1, H520S 2561-1LU

1 more replies
Relevance 36.9%

Hi Guys, I recently knew from my older brother that there's an option to disabled the touch pad, while using the laptop with the mouse. Because my touch is extra sensitive that when I'm working at times my palm touches it, and it transfers the cursor anywhere. But I like the sensitivity though because when I don't have a mouse, I can tap lightly twice and it opens the files or the links. But since using Fn+F6 for a week, I lost the sensitivity on my touch pad. I need to press hard once to click or open links or files. I tried modifying the touchpad sensitivity option, but no avail. Please help me, I'm a freelance worker and at times I don't work with a mouse.  Thanks,Brent

Answer:Using Function F6 disabled the the light touch sensitivy of my Z480 touch pad.

brentmausisa wrote:Hi Guys, I recently knew from my older brother that there's an option to disabled the touch pad, while using the laptop with the mouse. Because my touch is extra sensitive that when I'm working at times my palm touches it, and it transfers the cursor anywhere. But I like the sensitivity though because when I don't have a mouse, I can tap lightly twice and it opens the files or the links. But since using Fn+F6 for a week, I lost the sensitivity on my touch pad. I need to press hard once to click or open links or files. I tried modifying the touchpad sensitivity option, but no avail. Please help me, I'm a freelance worker and at times I don't work with a mouse.  Thanks,BrentTry uninstalling and reinstalling the driver.

1 more replies
Relevance 36.9%

Haven't updated your laptop's trackpad driver lately? Then you may well want to consider doing so, at least if your laptop is equipped with a Synaptics trackpad. As a user on the Hardware Zone forums discovered, the latest Synaptics driver seems to enable multitouch gestures on older laptops that didn't previously support them, including two-finger scrolling, and three-finger click. What's more, while the drivers themselves come from HP, they should work just fine on other laptops with a Synaptics trackpad. Hit up the link below to try it out for yourself.
Source: Synaptics driver enables multitouch gestures on older trackpads -- Engadget

p.s. working on my P7805u perfectly.

Download directly from HP:ftp://ftp.hp.com/pub/softpaq/sp47501-48000/sp47815.exe

Answer:Touchpad Driver that Unlocks Multi-Touch on older Touch

Thanks for posting this Martee I'm sure it will be of use to other members. Just one question am I the only one that can't get the download link to work? Fabe

3 more replies
Relevance 36.9%

Dear Guyz... I am using X200 - 7450 WPR, with single touch display.Is it possible to change my LCD panel with a multi touch display panel ? please help me in this !!!!!1

Answer:Multi touch LCD panel on single touch X200 tablet

I don't know the X200, but you can try the multitouch driver: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-67220

8 more replies
Relevance 36.9%

Hey, The U330 touch arrived today.The touch screen only works for a couple minutes and stops reacting after that. It works again after restart, but only for minutes again. It did this behavior from the beginning, without installing anything.(I only found that others have that problem too, but no solutions) Does someone have any suggestions to solve this problem?  

Answer:U330 Touch : Touch screen only works for a couple minutes

Hi EchsE,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that the Touch screen of your U330 Touch Laptop. Please let me know if you have re-installed the display driver and the issue persists in your computer.
 
Hope to hear back soon
 
Best Regards
Shiva Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 36.9%

My laptop automatically updated in Sept./Oct. It took about an hour and had multiple restarts, so I am assuming it was a Windows 10 update. I am not 100% sure though. Afterwards, the touch screen doesn't work. My laptop automatically updated in Sept./Oct. It took about an hour and had multiple restarts, so I am assuming it was a Windows 10 update. I am not 100% sure though. Afterwards, the touch screen doesn't work. I can tap the screen and it will select stuff but I cannot scroll or anything else. Anyone able to help with this? It is drving me bonkers.

More replies
Relevance 36.9%

I currently own an x1 carbon (2nd gen) 20A8 where in windows 10 settings | systems | about | device specifications it says "Pen and touch: Touch Support with 10 Touch Points". I'm looking at upgrading to an x1 carbon (4th gen) 20FB/20FC model where the ebay listing shows windows 10 settings | systems | about | device specifications it says "Pen and touch: Limited Touch Support with 2 Touch Points". Any insights as to what exactly a touch display with "Limited Touch Support with 2 Touch Points" implies about that 4th gen model number and display behavior in windows 10 as compared to what i have now that shows "Touch Support with 10 Touch Points"?













Solved!

Go to Solution.

Answer:what does x1 carbon (4th gen) "Limited Touch Support with 2 Touch Points" imply

Hello and welcome,
 
Only going by what I read below - the Gen 4 doesn't have a touchscreen option so that may be referring to the touchpad.
 
http://psref.lenovo.com/syspool/Sys/PDF/ThinkPad/ThinkPad%20X1%20Carbon%20(2nd%20Gen)/ThinkPad_X1_Ca...
 
http://psref.lenovo.com/syspool/Sys/PDF/ThinkPad/ThinkPad%20X1%20Carbon%20(4th%20Gen)/ThinkPad_X1_Ca...
 
Z.

3 more replies
Relevance 36.9%

For the past several weeks I've experienced a very annoying problem with my ThinkPad.  Whenever the laptop goes to sleep and resumes the touch screen goes... crazy. It starts registering multiple inputs across the touchscreen and the only thing that seems to resolve the issue is a restart. Sometimes, upon restart, the touch screen works normally, other times it does not work at all.  Has anyone else experienced this issue? I've seen this issue described for other Lenovo models with fixes, but none for my model.  Under the hardware ID in device manager, this monitor is a LEN 40A4.  I'm running Windows 10.  This is my third Thinkpad X1 Carbon, not because I love to upgrade, but because these machines seem to only last one year before something major breaks. 

More replies
Relevance 36.9%

Hi Does someone have pinout of connector (white, about 10 pins) which is comming from LCD of laptop U310 Touch LCDand connecting camera and touch screen panel? Actualy this are 2 USB prts, buth I need pinout on motherboard or connector itself. BR Tomaz

Answer:Pinout of camera and touch panel cable of U310 Touch LCD

Really nobody have any idea where to get this pinout? People from Lenovo?Does somebody have broken U310 Touch LCD panel and would share it with me?

1 more replies
Relevance 36.9%

Hi, I need a little help.  I assigned the user defined touch key (2nd from the left) to an application and now I would like to change it to another application.  For the life of me I cannot seem to figure out how, after intially assigning this button, to change it.  My model: Y530-40512QU Thanks in advance,Kevin













Solved!

Go to Solution.

Answer:Y530 Touch Panel - Change User Defined Touch Key

Look in tra for Icon named "User Defined Button" and right-click it





//help will save the world

8 more replies
Relevance 36.9%

Hello, this is my situationI have bought my Lenovo Z400 Touch 59366600 in June last year, and it came with a non-functional webcam. In September last year, the touchscreen started exhibiting the spurious touch input fault on the left edge, rendering the computer unusable until the touchscreen is disabled in Windows. At some point after this, I have disassembled the computer.I have since moved to Austria, and I wish to solve my laptop's problems and am willing to pay a fee for the service. How can I do so? In addition, I have already bought a new SSD and more RAM to upgrade my computer, and am planning on installing Windows onto the SSD, however the Windows installer will detect the touchscreen and it will be impossible to click any buttons on screen.  

More replies
Relevance 36.9%

Hi, I have a Lenovo Y70 Touch with Windows 10. Recently, my touchscreen has been malfunctioning.  Randomly, the touchscreen will start receiving touch events at various locations of the screen withouth me touching it, making it nearly impossible to do anything (By touch events, I mean it is as if someone is touching their fingers to my screen over and over again).  I can disable the touchscreen, which makes it so I can do stuff at least, but I would like to use the touchscreen without a problem. It seems like the false touch events are being received in a particular location on the left side of my screen for the most part, which leads me to believe it's a hardware issue. I ran the Lenovo Solution Center tool's hardware test and it didn't find anything, but I also didn't see a test for the touchscreen in there. I'm stumped. Even if it is a hardware issue, I'm not sure how to proceed with Lenovo (I am under warranty, thankfully). Any help or suggestions would be appreciated. Thanks.

Answer:Lenovo Y70 Touch - Touchscreen reading false touch events

hi mdw7326,
 
Welcome to the Forums.
 
It looks like you're experiencing a Ghost Touches on the screen similar to this thread. 
 
I would recommend you contact lenovo and report the issue as you likely need to send the unit for service.
 
Support phone list
 
 
Regards

2 more replies
Relevance 36.9%

I've lost the use of my keyboard, but not the touch pad. Restarting and converting to table mode and back doesn't correct the issue. Thoughts? I'm not sur where to go from here. Could the keyboard be physically dead?

Answer:Yoga 2 Keyboard not working, but touch pad and touch screen fine

You should test the keyboard in the BIOS menu and see whether it works. 1) Press on the recovery button (next to the power button, you may need a small screwdriver). https://www.flickr.com/photos/lead_org/11617761143/in/set-721576390073780542) Then there is an option menu for entering recovery, bios, etc. https://www.flickr.com/photos/lead_org/14512183979/in/set-72157639007378054Use your keyboard and see whether it works in that option menu. If it doesn't work then it is a faulty keyboard.

1 more replies
Relevance 36.9%

Especially at the right eadge, when I touch one spot, there're multiple spots in the same line across the screen responding, so, the result is when I am scrolling a document, the computer starts to zoom it  in or out!!!! I've got my first computer replaced and the second one still has the problem, it's a hardware problem or only needs some calibration???

Answer:X1 Carbon Touch: Touchscreen have a whole line of spots responding to my touch

Especially at the right eadge, when I touch one spot, there're multiple spots in the same line across the screen responding, so, the result is when I am scrolling a document, the computer starts to zoom it  in or out!!!! I've got my first computer replaced and the second one still has the problem, it's a hardware problem or only needs some calibration???

2 more replies
Relevance 36.9%

Hi, My G400s series touch screen laptop touch not working. It stops working just one month back. It was purchased around 16 months back. I have done all the trick which suggested on the forum by many users but all in vain. I have always updated with latest updates by Microsoft including Window 8.1/latest driver by Lenovo but I think this is not the issue with Windows upgrade because this was done months back and touch was working perfectly. If this is hardware problem the Lenovo should accept the fault and change the failure part free of cost or come up with some solution because many Lenovo users suffering with this problem. Kindly some one can suggest me where I should approach to get this rectify?

Answer:Lenovo 400s touch screen laptop touch not working

Hi Surinder,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issue with touch screen not working in your G400s laptop.
 
Please confirm is the display appears on the screen; also check if the touch screen is damaged.
 
Also try to reinstall the display driver and touchpad driver to the latest version and check for the issue.
 
Click here for the display driver for windows 8.1
 
Click here for the touchpad driver for windows 8.1.
 
Hope this helps. Do post back if issue persists!
 
Best regards,       
 
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 36.9%

Hello Thinkpad Support & Community, I'd like to buy the Thinkpad Edge E540 Touch. However only with FullHD Touch Display. That is why I would love to know when the FullHD Touch Display option becomes available. Does anyone know?!Thank you!Greetings,Peter

Answer:Availability of the FullHD Touch option for the Edge E540 Touch?

Hi Peter,
 
Welcome to Lenovo Community Forums!
 
There are models of Lenovo ThinkPad E540 that comes with a Full HD display. Here is the data sheet of E540.
 
You may choose a desired machine type number from the personal reference document of Edge Notebooks.
 
Hope this helps!
 
Best regards,
Mithun.





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 36.9%

Ok, so I got my Yoga 2 Pro 5 days ago. It was been working great until today. I turned it on and I noticed that the on screen volume indicator was active and at 100%. I pushed and held the volume down button and the indicator went down but as soon as I let it go, it goes all the way back up to 100% volume as if a ghost is making it happen. The volume indicator will not disappear. So I thought that maybe I did something wrong. I restarted the computer and nothing changed. Here is what else I've noticed: Volume indicator stays on all the time and will not disappearOn screen touch keyboard is inoperable, comes up but goes down immediately.Touchpad is unresponsive and swipe gestures don't work on the touchpad.The on screen start button (on the windows taskbar) doesn't work. Is not clickable.When I open apps, they open minimized and start blinking orange on the taskbar.In my office documents, when I right click, menu immediately disappearsI uninstalled and reinstalled the audio and touchpad drivers. Didn't work. It seems that something is either being depressed or is hungup or conflicting. I can't figure out what it is. I haven't tried much else, so I don't know if other features aren't working.  This is driving me crazy. Any help would be greatly appreciated. Thanks. 













Solved!

Go to Solution.

Answer:Yoga 2 Pro Problem - Volume, Touch, Touch Keyboard, not working

Ok, so I've completely reinstalled Windows and I still have the same issues. I guess I have a lemon. Going to bring this back and get a replacement.

3 more replies