Computer Support Forum

Post Windows 7 Upgrade - Touch Panel Not Responding to Finger Touch (x200t)

Question: Post Windows 7 Upgrade - Touch Panel Not Responding to Finger Touch (x200t)

Hello All - I just noticed that my multi-touch (not enhanced multi-touch) screen no longer responds to finger touch; just pen. It used to respond to both before i upgraded to Windows 7.I tried the Lenovo diagnostic check for the touch screen, and during the test, it only responded to the pen.What should I do? Is there a certain driver i'm missing or need to uninstall and then re-install?Thanks in advance.

Relevance 100%
Preferred Solution: Post Windows 7 Upgrade - Touch Panel Not Responding to Finger Touch (x200t)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Post Windows 7 Upgrade - Touch Panel Not Responding to Finger Touch (x200t)

Ok...I think i really screwed something up. As per a Lenovo support tech's advice, i installed the Windows 7 "Enhanced" Multi-touch Driver, even though i do not have the enhanced multi-touch screen, and this is what it says on Lenovo's site about this new driver: "*1: ThinkPad X200 Tablet models with the Multitouch are NOT supported." "*1: ThinkPad X200 Tablet models with the ENHANCED Multitouch ARE supported." So, i go ahead and install it. I notice that finger touch now works, but the pen setting are now all screwed up! The eraser no longer responds when i turn the pen around to erase. It actually INKS with the eraser as well! OneNote no longer automatically starts inking (or erasing) when i bring the pen (or eraser) into range. I have to manually click on the pen icon (or the eraser icon) on the tool bar to use these functionalities! *groan* In the Tablet PC Input Panel: no eraser functionality (it inks instead!!) and even the button on the pen (which previously had the right-click ability) only inks when pressed down! I think i made my situation worse...Please Help! Adam

2 more replies
Relevance 80.91%

I am one of the early adopter that bought the crappy 1080p touch TN panel. Now seeing that the 4k touch panel is superior, I would like my screen to be replaced.The question is , would the 4k touch panel physically fit the frame the came with 1080p panel (direct subtitute)? 4k replacement touch panel is not available for sale right now but maybe in a year or so when it is popular I will definitely consider doing that.Thanks.

Answer:Is it possible to upgrade IdeaPad Y50 1080p touch screen panel with 4k touch panel ?

Still, anyone from Lenovo know about this ?

1 more replies
Relevance 103.73%

Hello. I have a Lenovo Yoga 2 from work and we use it to get customer signiture on a web browser page for the company I work for. however lately. when a customer is trying to sign in the signniture box, it just move the whole screen around in a similar way to moving the screen with your finger. the only way it writes is when you hold the stylus down for a scond or two and then write without lifting it. but every time it leaves the screen then the same problem happens again. I tried to fix it from the touch screen settings but nothing seems to work. and advice on fixing this is greatly appreciated.

More replies
Relevance 102.5%

I have ThinkPad X230 Tablet. It used to have non-functioning touch screen. I did something, and now the screen responds to pen input, but it doesn't work properly for finger touch. When I touch with finger, only thing it does is minimize or maximize window. When I change position of taskbar (with start menu and icons), it doesn't maximize/minimize.  I think this means that when I touch with finger, cursor clicks at bottom right corner of display, where there is button for maximize/minimize window

More replies
Relevance 97.99%

I updated windows 7 to windows 10.After the update I started experiencing issues with touch screen. It starts working fine, but about 30 seconds later the touch screen stops responding.  Disabling any of the HID drivers and enabling them, reenables the touch screen for another 30 seconds I tried removing the HID drivers, all of themi went to services.msc and set the process to automatic. This did not fix the issue. Anyone with a similar problem, or solution













Solved!

Go to Solution.

Answer:W510 touch screen stops responding after upgrade to Windows 10

I seem to have fixed this issue.Check each of the HID drivers power management tabs under device manager and uncheck allow the computer to turn off this device power. Additionally enable HID service to start automaticvally under services.msc

1 more replies
Relevance 95.94%

Hello, I have the TOSHIBA Satellite U400. Everything is going great but I have a few concerns.

1. The Touch Panel (Media Buttons on top of keyboard -mute-media-play/pause-stop-rewind-forward-) turn
the computer ON if touched! How do you stop that from happening? I only need to use the POWER button.
Power button is enough.

2. The MUTE button on the Touch Panel does not actually "mute" or "unmute" sound. Instead, all it does
is turn the White Glow Light for the entire Touch Panel ON and OFF (including the word "SATELLITE").
How do I make it do its proper function?

3. When logging into Windows, I get to choose between Password or FACE RECOGNITION. How do I
set it to FACE RECOGNITION only without having to choose it?



Thank you,

SAL : )

Answer:Satellite U400 - Issues with touch panel, touch and media buttons

It seems like there may be a problem with the buttons, I would send the system to an ASP for repair.

2 more replies
Relevance 95.94%

Received my ThinkPad Yoga today - i7 ? 8 Gb - 256 Gb SSD - Win 8.1 pro ? One major problem ? the touch screen stops responding to finger intermittently. It always responds to the stylus. Updated all the Lenovo drivers and did Windows updates. When it stops responding, the only way to get it to work is by doing a shut down ( restart does not work ). Read the forums and disabled and enabled HID-compliant vendor-defined device. That did not make any difference. Is this a common issue and is there a software fix for it or is it just a faulty screen?

Answer:Thinkpad Yoga 20CDCTR1WW - Touch Screen not responding to touch - intermittent

Hi Waferthin,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that you are facing the issue with Touch screen on ThinkPad Yoga.
 
To resolve the issue please follow the below troubleshooting steps.
 

Remove the Wacom touch gesture driver in the device manager and make sure to check "uninstall driver" when you do so otherwise the touch will stop working again a minute later.
And after that restart the system and the touch screen driver will automatically install.
In services.msc restart human interface device service to run automatically.

Hope this helps! 
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

5 more replies
Relevance 95.94%

Hi, I have the Lenovo X1 Carbon Touch, new as of april 2014, and since last week, the touch screen has stopped responding to touch inputs. Before this it has been working and behaving perfectly. I have tried to turn the laptop entirely off and on, reboots... No effect. The screen simply acts like it never was touch. The HID driver is present and claims to be working. I tried to reinstall it and it does so with no errors or warnings. I also tried to reinstall the monitor and graphics card drivers. The Tablet control panel icon offers a calibrate option but Reset is disabled. The calibrate doesn't help because it doesn't respond to touch. System says it has touch with 10 finger inputs. Windows 8.1 Update 1, Enterprise SKU Any advice is welcome. UPDATE! Touch works when I lay the screen out flat. But if I return it to any angle, it stops working. Is this related to LayFlat mode or is there a connection fault in the display for touch input so only when I lay it flat it has contact? Software or hardware?

More replies
Relevance 95.53%

Hi Does someone have pinout of connector (white, about 10 pins) which is comming from LCD of laptop U310 Touch LCDand connecting camera and touch screen panel? Actualy this are 2 USB prts, buth I need pinout on motherboard or connector itself. BR Tomaz

Answer:Pinout of camera and touch panel cable of U310 Touch LCD

Really nobody have any idea where to get this pinout? People from Lenovo?Does somebody have broken U310 Touch LCD panel and would share it with me?

1 more replies
Relevance 95.53%

Hi, I need a little help.  I assigned the user defined touch key (2nd from the left) to an application and now I would like to change it to another application.  For the life of me I cannot seem to figure out how, after intially assigning this button, to change it.  My model: Y530-40512QU Thanks in advance,Kevin













Solved!

Go to Solution.

Answer:Y530 Touch Panel - Change User Defined Touch Key

Look in tra for Icon named "User Defined Button" and right-click it





//help will save the world

8 more replies
Relevance 95.53%

Dear Guyz... I am using X200 - 7450 WPR, with single touch display.Is it possible to change my LCD panel with a multi touch display panel ? please help me in this !!!!!1

Answer:Multi touch LCD panel on single touch X200 tablet

I don't know the X200, but you can try the multitouch driver: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-67220

8 more replies
Relevance 95.53%

Especially at the right eadge, when I touch one spot, there're multiple spots in the same line across the screen responding, so, the result is when I am scrolling a document, the computer starts to zoom it  in or out!!!! I've got my first computer replaced and the second one still has the problem, it's a hardware problem or only needs some calibration???

Answer:X1 Carbon Touch: Touchscreen have a whole line of spots responding to my touch

Especially at the right eadge, when I touch one spot, there're multiple spots in the same line across the screen responding, so, the result is when I am scrolling a document, the computer starts to zoom it  in or out!!!! I've got my first computer replaced and the second one still has the problem, it's a hardware problem or only needs some calibration???

2 more replies
Relevance 94.3%

Has anyone noticed that every once in a while, a Yoga screen becomes unresponsive to touch?  I use mine mostly in tablet mode, and sometimes out of the blue, I can no longer do anything with the screen.  I have to use the power button to put the laptop to sleep, and then press it again to wake--everything works again after that.  So I'm wondering why that happens.  Is it a touchscreen driver crashing?  Has anyone found whether there's some driver version that works better or else another solution?  P.S.: Im using all the latest drivers I could find, including the latest Intel display driver.  No other issues at all other than this one.

Answer:Yoga 2 Pro: touch screen stops responding to touch sometimes

I have not had this issue, but is it possible that it has something to do with transitioning in and out of tablet mode?   In my normal usage I have to fold the screen about halfway closed to set my T2P down which puts the device in tablet mode.  Occasionally, when I open it back up the keyboard and touchpad do not respond.  If I close it most of the way then reopen, it snaps back to laptop mode and all is OK.  Your issue may be completely unrelated, but I am offering it in case it jogs some other thoughts.

1 more replies
Relevance 90.2%

I am a corporate user and just upgraded from an X61 tablet to an x200 tablet and are slowly exploring the new features. The specs as given to me are that this is a x200 7450 RZ1, but I can not find anywhere on the web what the exact specs are. So question is does this machine have finger touch and or WWAN on board. Finger touch did work for 2 minutes but will not return.  I have browsed the web but can only find a driver for Vista. Please help  

Answer:finger touch does not function on x200 under windows XP

Try this:Lenovo Fingerprint Software for Windows Vista 32 bit and XP 





ThinkPad X200s + LED | SL9400 | 4GB DDR3 1066 | 500GB Momentus XT | Intel 5350 WiMax | BT & FPR | 9-cell | Win7-x64 & Linux x64 | Ultrabase ThinkPad E10/Edge 11 | K325 | 2GB DDR3 1066 | 320GB 5400

3 more replies
Relevance 90.2%

Hello!Unforutanley gestures like "forward" or "backward"(swiping with the finger to the left or right) to navigate one step back i.e. in the windows explorer or Firefox doesnt work.I can't get the gestures to work  If i try to learn the gestures (http://imgur.com/bPzQqGp ... Control Panel --> Pen and Fingerinput --> second Tab --> Hotlink, i will get the message:With the mouse button or with the finger it is not possible to perform gestures. Please use the tablet pen (translated from german to englisch).If I performs these gestures with the pen, it's possible. But it is so annoying....gestures with the pen arent very user friendly. Any tips?Thanks! 

Answer:No finger/touch gestures with x230t @ Windows 8

Hi, schlomm
 
What is the model number of your X230T? You should be able to find this information on the back of the system near the serial number. It should be in the format of XXXX-XXX, such as 3247-A2E.
 
Thanks in advance,
Adam 





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

5 more replies
Relevance 90.2%

Yoga thinkpad 20cd. I have the original stylus that came with the lap top as well as an aftermarket LIfebook stylus. The screen doesn't register either stylus. When i go to the windows pen calibration the stylus works fine. The calibration consists of tapping targets with the stylus pen. It is very accurate. Soon as i close the calibration window the stylus doesn't interact with the screen at all. I assume I must have changed some setting by accident or it occurred with an update. The stylus use to work a few months ago. I have tried messing with my display settings to remove the adaptive brightness at one point and may have selected a wrong setting. Thank you for any help provided. 













Solved!

Go to Solution.

Answer:Touch screen not responding to stylus only finger. But in stylus calibration, the stylus works fine.

SOLVEDOpened Wacom Pen and restored to default settings. started working again. Never have opened Wacom pen before, not sure why that worked. 

1 more replies
Relevance 89.38%

I have an x201 tablet and often use the pen with One Note. With Windows 10, it is impossible to lift the pen the slightest bit off the tablet without reactivating finger sensitivity. The result is that I get a bunch of scribbles from my hand touching the screen, and also inadvertantly hit other tabs etc while trying to write.Any suggestions?

More replies
Relevance 88.97%

Hi. I can't get the touch feature on my x200t ThinkPad [type 7450] to work.  I've spent over 3 hours trying to troubleshoot it myself, but to no avail.I've installed both Wacom and Lenovo's drivers, as well as some random digitizer firmware update I found somewhere on the Lenovo website.In the "Touch" section of "Pen and Touch settings in control panel, I have checkmarked "Use your finger as an input device".I'm running Windows 7 Enterprise 64-Bit. Anyone who can help me, don't hesitiate; I'm a bit desperate at this point. Thanks!

Answer:Touch On X200t NOT WORKING

Did you ever have Touch function working on your machine?

8 more replies
Relevance 88.97%

hi, i had just purchased a X200t with type code 7450-RM1 and received it on Thursday. Since Windows 7 is not out yet on Thursday i can't check the multi-touch function.  Today, i have just downloaded a window 7 30days version to try the multitouch function. after i have installed and updated the window, i found that the multitouch function is still not working. i can only use the single use function. Is the multitouch function still preparing and not usable right now? thanks .

More replies
Relevance 88.15%

I purchased a new X200-T (model 74498JU) today.  I cannot figure out how to use the multi-touch screen.  The pen works fine. Is there some method to enable the touch screen so that I can use my fingers on the screen? I appreciate any help. Thanks Jim

Answer:X200T - Touch Screen (how to enable it?)

sjeye wrote:I purchased a new X200-T (model 74498JU) today.  I cannot figure out how to use the multi-touch screen.  The pen works fine. Is there some method to enable the touch screen so that I can use my fingers on the screen? I appreciate any help. Thanks JimMulti touch with this laptop only means that you can us the digitizer and your finger.Not multiple fingers.If you touch one finger to the screen you will notice a mouse image appearing you can click the image buttons but that is all.So think as your finger as a very rough/rude digitizer replacement.

9 more replies
Relevance 88.15%

Hi There,I want to know what is the different between the Displays in X200T notebook. I?m confused because some part numbers are with Touch Screen and Some are not Showing Touch Screen in the Specification. I want to know whether there no touch screen in this notebook Eg: ThinkPad X200 Tablet 7449-9FU vs ThinkPad X200 Tablet 7449-EKUThinkPad X200 Tablet 7449-9FUSL9400(1.86GHz), 2GB RAM, 160GB 5400rpm HD, 12.1in 1280x800 LCD, Intel X4500HD, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ethernet, Secure chip, X200 UltraBase+CDRW/DVDRW, Fingerprint reader, 4c Li-Ion, WinXP Pro ThinkPad X200 Tablet 7449-EKUSL9400(1.86GHz), 4GB RAM, 160GB 7200rpm HD, 12.1in 1280x800 LCD Touchscreen, Intel X4500HD, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ethernet, Secure chip, X200 UltraBase+CDRW/DVDRW, FPR, Camera, Intel Turbo Memory, 8c Li-Ion, WinVista Business 64What I really want to know is if I buy a the 7449-9FU Notebook will I be able to get a Touchscreen notebook. Thanks and best Regards.Pls advise me.

More replies
Relevance 87.33%

Does anyone have any ideas on the following? I have a Multitouch X200 Tablet that has functioned fine under W7 x64 sofar. Recently however my touch input disappeared. My Computer properties only indicate that Pen Input is available and the applications that require Touch complain about (multi-)touch missing. (The screen does react to touch though). When I remove and reinstall the driver, the computer properties suddenly show Pen + Touch input with two-finger input available. The touch-aware applications that normally complain behave correctly at this point. After the (required) reboot however, properties are back to Pen Input only, and the applications start complaining about Touch input missing again .... I'm lost here .....





Lenovo Premium Business PartnerX1 Carbon Touch | i7-3667U | 8Gb | 256Gb | HD 4000 | 14HD+ | WWAN | W8.1 Pro RTM x64 |

More replies
Relevance 86.51%

Hello Everybody,
I have a Latitude E7440 non touch screen version that needs a complete new display assembly due damage. I was wondering if it is possible to fit a complete touch screen assembly as a replacement? I noticed that the back shell of the touch assembly is slightly different and I guess the whole structure is heavier than the non-touch version. 
Many thanks,
Viktor

Answer:E7440 upgrade from non-touch to touch screen

It is possible - but everything north of the base/keyboard needs to be replaced -- upper structure, bezel, screen, cables, antenna wires and hinges.

1 more replies
Relevance 86.51%

hello, can my lenovo s410p non-touch be upgraded to have a touch screen? and also if it can have a backlit accutype keyboard? thanks

More replies
Relevance 86.51%

Hi everyone,  I am currently using a Lenovo T450s with the default screen option when checking out. I would like to upgrade to a touch screen. I would like to ask if:- the upgrade from non-touch to touch screen is possible?-where could I buy the touch screen for the laptop? would this one work? https://www.amazon.com/Lenovo-T450S-Touch-Screen-04X5911/dp/B01H0NKM5W/ref=sr_1_5?ie=UTF8&qid=147986... - where could i the basic guide to do it by myself? The most important question that I think is the first one: whether it is possible to upgrade from a non-touch to touch screen on T450s. I look forward to hearing all the suggestions.Thank you.

More replies
Relevance 86.51%

My client told me this was a touch screen, so that is what I ordered.  HP 749970-001 touch screen display assembly.It is installed, but not recognized.  In order to use it as a touch screen, would I have to replace the motherboard too?Is there a driver available?  The display works, it is just not working as a touch screen.




Sparky

More replies
Relevance 85.28%

I have 2 brand new x200t units with Windows 7.  Both units are having issues with the touch screens not working about half the time.  It seems to be a driver issue, because when I log out of the current profile it will work when I'm at the login screen.  If I reboot it works again for a little bit.  The problem seems to occur if I change users or logoff and back on.  I called Lenovo tech support and their only suggestion was to reload the drivers which didn't work.  Is anyone else having this issue?

Answer:Brand New X200T's WIn7 touch and multitouch not working intermittently

I just love Lenovo tech support.  The tech just told me they don't support driver issues for the mutitouch and pen touch, because it's a Microsoft problem.  So basically they won't support the product as it was sold out of the box.   I could understand if it was a problem with software that I installed.  But their brand new tablet should work and if it doesn't they should fix it.  I have a 3 year AD warranty that I paid a lot of money for.  It's not my problem that their hardware doesn't work properly with the operating system they sold with the unit.  They did say I could downgrade to xp and it might work better, but I'd have to buy a new recovery disk.  He really pissed me off when I asked for a manager and he said I couldn't talk to them that he would have to IM them for me.  They finally agreed to send me the disks.  At this point if it doesn't fix the issue, they're going back and I'm finding a new tablet vendor.

9 more replies
Relevance 84.46%

I just installed windows and ran Lenovo System Update. Now the touch screen and pen are not working. Under device manager there is an unknown device. Is there someplace to download the drive directly? Glenn

More replies
Relevance 84.05%

I've seen several posts on this but no working solution.  Can anyone point me towards a fix for the two finger tap on the Y50-70 Touch?

More replies
Relevance 84.05%

I was informed by an X41 tablet seller on e-bay that  he was unable to use the X41 tablet by touching the screen  with the finger. Is this true? Is there some magic  to get finger touch working ?thanks

Answer:finger touch on an X41

Hi netbeans, welcome to the forum, afaik, X4* tablets didn't have this capability. Depending on model X6* tablets do.So if you want to give your tablet "the finger" it had better be an X6* tablet.

3 more replies
Relevance 84.05%
Question: Touch w/finger

Can I used finger instead of pen on model # 744943u?

Answer:Touch w/finger

Probably. I have a 7448CTO that does. I don't think it's a multitouch, either. Should be the same hardware.

2 more replies
Relevance 83.23%

I just purchased a x41 tablet pc but it didn't come with the pen.  I bought a cheap pen made for a iphone off ebay will that work. I have tried using my fingers to select things as well. No luck! Is there a special pen that "has" to be used???Or is fingers or cheap pen acceptable. If you are able to use your fingers or cheap pen how do i set it up to work? I'm using windows 7. Thank you!

More replies
Relevance 83.23%

Hi, I'd like to disable the two finger touch on my elan touchpad because it's very annoying. How can i do? With the factory installed driver the ELAN setting program was not working, so I installed many different versions of the driver, but every time I change the settings in the ELAN setting program nothing changes.I own a Inspiron 15 7000 series 7559 with windows 10.Thanks for your help.

More replies
Relevance 83.23%

Hello every bodyi just bought an X201 tablet pcX201 3113-CF8after a clean install of win 8 64bits the touch screen didn't worki got no pen with it and i counted on using one/mutlitouch finger.i almost installed all the available drivers and tested all available solutions but it still don't workcould someone please help methank you













Solved!

Go to Solution.

Answer:X201 no finger touch and no pen

Did finger touch ever work? It looks to me like this is a pen-only model

3 more replies
Relevance 83.23%

Hi guysi did buy a  HP Elitebook 2740p and when i changed  windows The finger touch system is not working, but The Pen does work. It did install the drivers, i did update the firmwareWhat can i do?plz help me 

More replies
Relevance 83.23%

Hello, I have a Thinkpad X61 (7762WFX) at work.  Then pen works fine, but I was under the impression that I should be able to interact with just my finger on the screen.  If this is indeed the case, how do I go about doing that.  I have updated the multitouch drivers to the newest. I am on Windows 7 Professional. Thanks! 

Answer:Finger Touch - x61 7762WFX

Hi rigwad and welcome to the community,
 
Some screens are pen only and some are pen and touch.
 
Go into control panel, system. About the middle of the page it will say pen and touch.  What does it say after that?  Does it say that you have pen and touch?
 
Dave 

9 more replies
Relevance 83.23%

Please help me my laptop hp 2740p touch not working pen touch is working good but no finger touch please help mei also goto device manager and there is no hid compilant touch screen drivers please any solution please post down thanks

More replies
Relevance 82%

I am using windows journal a having problems that I can not turn off finger input when writing with a pen. The screen becomes insensitive to a finger when I am about an inch away from the screen with the pen, but this is not enough to avoid accidental dots and lines with your finger. Can one either configure the pen distance from the screen from which on finger touch is disabled? Or can one disable finger touch altogether? I have been following some discussions on forums providing some workarounds, but maybe there is a simpler solution around?138

More replies
Relevance 82%
Answer:Stylus still works but finger touch does not after...

What model is the machine?

1 more replies
Relevance 82%

Hello all,  I have come across a very strange issue and searching on this forum and Google have not shown something fully similiar. This past weekend I did the update to Windows 8.1 from Win 8 and now the touch screen on my W510 stops responding anywhere from 20-60 seconds after login. I have checked the driver and it is currently using the Wacom Gesture Touch Properties v.7.0.1.0 from 12/2010, Microsoft HID-compliant vendor-defined device from 6/2006 and Microsoft HID-compliant touch screen driver from 6/2006. Windows states these are the latest drivers and that all is working properly.  I have attempted to identify if there are any startup conflicts without success. The touchscreen is fine and then all of a sudden there is no response. No problems at all with with Windows 8. This seems to me to be a software conflict or firmware problem as there is functionality when I first start the machine. Any ideas would be apprecicated.  System info: W510 4318CTO Intel Core i7 Q 720 @1.60GHz8GB RAMnVidia Quadro FX 880M15.6-inch (396mm) FHD (1920x1080) color, anti-glare, LED backlight, MultiTouch (touchscreen supports two-finger touch)Windows 8.1 Thank you.













Solved!

Go to Solution.

Answer:W510 touch screen stops responding since Windows 8.1

Well I was hoping for some suggestions. Still working on this myself. I have found that if I go into services.msc and restart the Human Interface Device Service, then the touch screen will start working again for a about a minute. As long as I'm working with it, everything is good. If I let it sit for some time, ~20 sec, then it's no longer working.The startup type for this service is Automatic (Trigger Start). Maybe things are not being triggered.Or this is a red herring...

9 more replies
Relevance 82%

i have lenovo z400 (non touch) core i5 3rd gen, 6gb, 1Tb. nvidia gt635m 2gb + intel hd4000 2gbcan i upgrade my sceen ? from non touch to touch ? we can change screen hardware ? i want touch my screen. have any solution ?and another one issue is = brightness problem win8.1 x64 . it can just very low level and very high level. i can't set it normally like medium brightness. have any solution ? 

More replies
Relevance 81.18%

The multi-touch screen is suppose to register 5 fingers right? Mine reports only 2 under the computer properties page in win 7. Is this normal, or do I have something wrong?   





-If this post was helpful maybe consider giving me a kudos for it.Thinkpad x230 -i5, 16gb RAM, 240gb SSD, 500gb 7.2k hdd, win 8.1 proThinkpad x220t - multi-touch, i7, 16gb RAM, 80gb SSD, 320gb 7.2k hdd, win 7 pro 64

Answer:Multi-touch screen finger count

multi-touch does not mean 5 fingers.  It depends on the hardware.  In the case of X220, multi-touch means 2 fingers.

4 more replies
Relevance 81.18%

hello, i have the x201 tablet 311396u and i cannot get the finger touch to work,  it says in system properties that i have pen and touch and in the control panel tablet settings it says it as well.  but when i go to calibrate the finger touch nothing happens...  i have even updated the driver through the lenovo site,, any thoughts??

Answer:lenovo x201 pen works but not finger touch

hey them0dster,could you uninstall the following :TrackPoint DriverUltraNav (Trackpoint + Touchpad) UltraNav UtilityOnce done, reinstall the above starting with the TrackPoint Driver first.http://www-307.ibm.com/pc/support/site.wss/MIGR-70656.html





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

4 more replies
Relevance 81.18%

Hello, It seems like I need to press very firmly on some items for the finger touch to work. How do I adjust to have less of a firm press?

More replies
Relevance 81.18%

Hello everybody, this is my first post on this forum, from my first lenovo PC, so I'm truly a newbie. Just picked up my brand new x220t from a local reseller, and tried to configure it to fit my needs. During the process I realized I'm not able to configure the touchscreen nor use it. The digi-pen works fine though. 1. I've checked under Control Panel | Pen & Touch Devices. This window should have 4 tabs (the last on the right should read Touch), but it ain't there as if some functionality was missing. 2. I also tried to turn the touch screen on/off via Simple Tap. It does inform me that I'm about to switch the touch screen off (and as a matter of fact I'm not able to use it wth my fingers) but when I turn it on again the touchscreen still doesn't react to my fingers. 3. I've downloaded all the win7 as well as lenovo updates via the update managers, installed them and did a complete restart of the system - still no touchscreen. 4. Under device Manager I tried to find Wacom  devices, but couldn't find any. (the touch screen is a Wacom, am I correct?) 5. In despair I even started reading the pdf manual where one can read:  "Some models have the touch panel feature". This left me a little bit uneasy. Do ALL x220 convertible tablets have finger sensitive touchscreens? I have read the sticky thread about conventional vs. multitouch lenovo tablets, and I gather that the answer should be yes - all have finger input besides digi-pen. ... Read more

Answer:x220t - NYK27PB - no finger touch input

The models with the outdoor screen (the one that has a reinforced gorilla glass surface) don't have multi-touch, only pen support. If your model doesn't have the outdoor screen then it should have multi-touch support, if that is the case perhaps you should contact tech support? It's possible that it's just a hardware problem and needs replacing.  Also, the pen digitiser uses Wacom technology, as far as I'm aware the multi-touch system doesn't.

6 more replies
Relevance 81.18%

We received a new X201 Tablet, but it seems that the screen will only respond to the pen input.  It will not read any input fingers.  I haven't found a way to turn this on...would someone please point me in the correct direction?  Thanks













Solved!

Go to Solution.

Answer:New X201 3093-CTO will not respond to finger touch, only pen

Nevermind, I see wee have a superbright display instead of the multitouch.

1 more replies
Relevance 81.18%

Hi, I'm new to the tablet and experiencing that even when I turn off the "Touch pointer" in control panel, the cursor is always above my finger about 1 inch.  This makes it is very hard to navigate and I cannot even open the Start menu at the bottom.How do I change this behavior? Thanks for your help!

More replies
Relevance 81.18%

Hi, I have been baffled by this issue for quite a while now. I have a lenovo X220 tablet that supports both finger and pen inputs for touch. Originally this laptop came with windows 7 and everything was fine and dandy. I then bought windows 8/8.1 Pro 64-bit and did a clean installation of it. Now I only have pen support for the touchscreen, i.e. my finger is recognized as a pen/mouse not a finger which is really frustrating specially when scrolling. Now before I actually purchased the win8 license I had tried out the windows 8 release preview and everything worked perfectly then. So now when I got the actual release of the OS its not. Furthermore I currently have a dual-boot set up with windows 10 technical preview as my other OS and in there it also works perfectly fine as it should. This is important because when I contacted lenovo about the issue they suggested that my screen was broken, but clearly it is not.  Can anyone shed some light on this issue? It is a real shame not to be able to take advantage of this fine screen and windows 8 touch friendlyness.  Kind regards.

Answer:X220 Tablet pen support only no touch with finger

There is a firmware update for X220 tablet under win8 that improves didigitizer recognition.http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-tablet-laptops/think...

2 more replies
Relevance 81.18%

Hello everybody, Just bought new x220 tablet (4294CTO), and tried to configure it to fit my needs. During the process I realized I'm not able to configure the touchscreen nor use it. The digi-pen works fine though, but finger touch does not function. I have check model description on Lenovo site it's said clearly Multi-touch 5 finger display, not outdoor, download all updates from Lenovo - no changes. What steps do I need to take in order to get this touch functionality up and running? Thank you in advance.

Answer:x220t - 4294CTO- no finger touch input

Same model and same problem with you after upgrade from win7 pro to ultimate. Wait for solutions

3 more replies
Relevance 81.18%

Hi all ! I got a X220 Tablet from a friend and i am very happy with my tablet.The only question i have which makes me crazy and i cannot understand is that i have no touch capabliity only through wacom pen works.The same issue was with windows7 pro preinstalled and with windows8 upgrade i did after getting the laptop.Is it possible that my X220 Tablet has a panel that only works with wacom pen or i is it a software issue so i can resolve it by installing it and have the finger touch capability. Thanks in advance !!!













Solved!

Go to Solution.

Answer:X220 Tablet - No finger touch capability only pen :(

there are two types of X220t and X230t screens used one is both touch sensitive and uses pen digitiser, there is another one that is outdoor screen version that is only pen digitiser (so there is no finger touch capability).

2 more replies
Relevance 81.18%

Hi,

I have a Portege M780 and Windows 7 x64.

My laptop recognizes the pen and one point touch devices.

I can use the pen fine, no problem with this. But finger touch screen doesn?t work. I go to control panel and finger touch is activated.

I download Wacom dual touch drivers for W7x64 from Toshiba?s support web, but I can?t install it because when I try it says ? not supported platform ?.

Someone could help please?

Answer:Portege M780 finger touch not working

I download Wacom dual touch drivers for W7x64 from Toshiba?s support web



Where did you find this 64bit driver?
The Toshiba European driver page does not provide Dual touch driver for Win 7 64bit but only for Win 7 32bit

7 more replies
Relevance 81.18%

I am in an IT department at a small clinic in Idaho.  We have several X220's and X230's here.   There are several machines that have issues with the touch screen just stopping.  Nothing with the pen/finger will work.  The mouse still works, but nothing with the pen. We created a script that restarts the TabletInputService, the docs would run this script when the pen stops working.  That script works a majority of the time, but not always.  One of our docs just received a brand new X230 Type 3435-2TU 2 weeks ago.  She pen has stopped working several times in that two weeks.  She said that script only works a few times.  She has to reboot for it to work again....so rebooting works.  We can't have docs rebooting 3-4 times a day. Does anyone know of a permanent fix for this? Please help!!Desperate IT Guy!!   

Answer:X230 Touch screen with Pen or Finger fails often

We just got 9 new x230's and some of them are doing the same thing. Did you ever get a resolution?

9 more replies
Relevance 81.18%

I hope I'm not making a mistake, I have a 6364-BV2, I assume it's multitouch (as long as the pen works, should finger touch work as well?) and I'm not able to use my fingers to touch anything on the screen. It's the low-rez version... I tried installing the multitouch driver but for nothing... I have xp tablet edition... Is it possible that my tablet doesn't actually have multitouch (finger touch capability) and only the pen is supposed to work? Thanks

Answer:x60 multitouch issue: finger touch won't work

Not all screen are multitouch capable, the pen have a special proximty device that the sensors on a layer on top of the screen picks up, unless the screen also has an additional sensor sheet for your finger, it would not work with your finger... There are two types of screen option one is Multitouch and Non-multitouch in the XGA format, and SXGA format is definitely non multi-touch.  

8 more replies
Relevance 80.77%

My IdeaPad U310 Touch running Windows 7 is having touchpad problems. With no touchpad drivers installed, it shows up as a generic "PS/2 Compatible Mouse" and has basic functionality - I can move the pointer and click, but no gestures, scrolling or other touch features.
 
Link to image 1
 
I then installed 0wto11ww.exe, "TouchPad Driver (Synaptics, Cypress)" from http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-u-series-laptops/ideapad-u310-... . Version 15.3.33.0/2.3.6.31, released 4/24/2012.
 
After installing, I manually updated the driver via Device Manager and rebooted. Now the computer identifies the touchpad as a "Lenovo pointing device".
 
However, the computer doesn't respond to the touchpad at all. No mouse moving or clicking is working. Enabling/disabling the touchpad via Fn+F6 has no effect. I rebooted in safe mode and the touchpad was still unresponsive.
 
Link to image 2
 
I think I'm on the right track, because when I installed 0wto11ww.exe, the touchpad configuration tab showed up in control panel's "Mouse Properties". I can configure all the touchpad's advanced features now, but Windows 7 continues to ignore the input.
 
Any ideas on how to further troubleshoot this issue? Thanks!
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

More replies
Relevance 80.77%

Hi everyone,
I have a 1.5 year old Dell Latitude 3540 laptop, which I've recently upgraded to Windows 10 Pro (from 8.1 Pro). It has a non-touch screen.
For some reason, Windows 10 sometimes thinks it has a touch screen. It then shows the icon for the touch keyboard at the bottom right corner, and when going to Settings->System->About, under "Pen and Touch" it says "Touch support with 2 touch points".
This doesn't really bother me, as it doesn't seem to actually influence anything important. But still, seems pretty strange.
Did anyone else here experience something similar?
Thanks!

More replies
Relevance 80.77%
Relevance 80.77%
Relevance 80.36%

Hello,Recently my brother bought a refurbished x230t type 3437-XE1.Spec: windows 7, processor i7, 8gb ram. Since I tried it today, I was never able to get the finger touch to work (no tablet touch screen function at all), but  the stylus pen seems to work perfectly.Also, the simple tap gesture (double clicking with two fingers on the pad) doesnt seem to work.I dont know whether some settings are not correct or the refurbished product has its faults. Please assist me in how to solve the problems.thank you. 

Answer:x230 tablet finger touch doesnt work since I got it.

leevshan wrote:Hello,Recently my brother bought a refurbished x230t type 3437-XE1.Spec: windows 7, processor i7, 8gb ram. Since I tried it today, I was never able to get the finger touch to work (no tablet touch screen function at all), but  the stylus pen seems to work perfectly.Also, the simple tap gesture (double clicking with two fingers on the pad) doesnt seem to work.I dont know whether some settings are not correct or the refurbished product has its faults. Please assist me in how to solve the problems.thank you. The Gorilla Glass model of the X230t does not offer touch.

2 more replies
Relevance 80.36%

I ordered my x200 tablet on cyber monday nov 30th, but i am not sure is my screen multitouch like iphone or not. Estimated shipping date was dec 8th, but has been delayed to dec16 In my order, monitor spec :44C5631  SBB 12.1WVSBRLEDWXGALCDPPLEDCF Can anyone tell me if this is multi touch screen? if not, can i ask them to correct my order to multitouch?  Thanks for your help in advance  Max

Answer:Is my x200 tablelet multitouch screen (two finger touch?)

Just got mine with the same part number 44C5631 ... NOT HAPPY.    And I'm afraid you won't be either. No you don't have ENHANCED MultiTouchAs a matter of fact, you don't even have MultiTouch. Much to my dismay, this part number is for a DIGITIZER-ONLY screen. ARGH!!!!   I talked to sales endlessly to get this right when I ordered ... and they STILL send me the wrong one.  It's like they do it on purpose ;-) .... Unreal.

5 more replies
Relevance 80.36%

Hi all,
I'm currently operating with a Dell Latitude (E6410) running Windows 7 32-bit. I have the default Alps touchpad built-in, and was recently ecstatic to find the driver for multi-touch on the Dell Support page, something I figured I'd never get privileged to since this doesn't have a Synaptics touchpad.
Everything works as it;s supposed to, as far as the options go under the Dell Pointing Devices menu. However, I noticed that two-finger options are missing, specifically a two-finger right click. This is odd, seeing as there are plenty of other two-finger options, and since two-finger right click has become a standard with multi-touch touchpads.
So my question is, is there anything I can do to get two-finger right click? I don't see any options officially provided by Dell, so I'm totally okay with installing software or drivers from somewhere else, as long as they work. I haven't been able to find anything myself, as it seems every driver and software in the world is developed with Synaptics in mind.

Answer:Two-Finger Right Click with Dell Multi-touch Touchpad?

I have the exact same question. I see that this was posted 3 years ago without a solution / reply :(

2 more replies
Relevance 80.36%

I have tried updated the drivers on lenovo's website to no avail. Im currently using win7 prof. I have also tried using the thinkpads system update software and it still does not work. When i go try and calibrate the screen both finger and pen have no response on the screen. I have checked the system device manager and there are no conflicts. Please help!

Answer:X201T 2985-F4U -- Both finger touch and pen not working on screen

Hi and welcome to the forum!

The tabook says your model has multitouch (i.e. both pen and finger touch). Is this a new system you bought? If so, did you buy directly from lenovo? Did the touch ever work?

Try to install the following driver:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-74908

If the driver installation doesn't help, subsequently try Windows Update, look particularly for Touch Input driver, if even that doesn't take you anywhere, then give factory restore a go (after backing up your data), to do so, press ThinkVantage button on boot to access Rescue and Recovery, and choose restore to factory contents in the following wizard. Note that factory restore is only available on lenovo preloaded OS.

Keep us posted.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Español Visit my YouTube Channel

2 more replies
Relevance 80.36%

My finger print reader failed and a Lenovo support tech installed a new replacement. Now my PC won't start from the finger print reader although it works fine after I hit the start button.  I have had a few calls with the telephone service people and no one is able to address this problem.













Solved!

Go to Solution.

Answer:Can't start X1 Carbon touch from finger print reader

Hi Lebouitz,
 
Welcome to Lenovo Community Forums!
 
I?m really sorry to hear that you are not able to start your Lenovo X1 carbon Touch using the fingerprint reader.
 
I would suggest you to try the following steps.
 
To enable power-on passwords replacement:

Login as administrator.
Start Fingerprint Software.
Click Settings.
Click Authentication.
Check Always show power-on Security Option if power-on passwords are not set.
Check Use fingerprint scan instead of power-on and hard drive passwords.
Check enable single sign-on capability if you want to boot from power-on to windows without further fingerprint swipe or passwords.

 
Spoiler (Highlight to read)
 
To enable power-on replacement for fingerprint swipe:

Start Fingerprint Software.
Authenticate with password or enrolled fingerprint.
Click the Power-on slot on the top of the enrolled fingerprint.
Close Fingerprint settings and shutdown system.
On the first reboot you will be asked for your password and fingerprints. The second time you reboot it will only require your fingerprint.

Spoiler (Highlight to read)
 
For further information regarding fingerprint reader, refer the below link.
 

Fingerprint Reader tips

Let me know how this goes!
 
Best Regards,
Mithun.
 





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! ... Read more

3 more replies
Relevance 80.36%

Few issues that have popped up in the last few days after some Windows updates 1) Two finger scrolling stopped working2) Touchpad will randomly stop/start working, as in I can't even move the cursor. When I restart the machine the two finger scroll will work then stop somewhat randomly

Answer:u430 - 2 finger scrolling and other touch issues on Win10

Dear ldevine,
 
Welcome in lenovo community,
 
Please try to uninstall the touchpad driver from the device manager, and install the below one please.
 
https://download.lenovo.com/consumer/mobiles/0vu102af.exe
 
Regards,
Joseph

1 more replies
Relevance 80.36%

Upgraded simple pass soft ware and since then says that the finger print reader not connected though on start up the finger print reader does flash but if I swipe my finger over it just stops. it doesn't flash at any other time than start up. Gone into device manager and up dated reader driver for it but made no difference also in device manger is says it's operating ok.  Help please?

More replies
Relevance 80.36%

Hi I finally decided to upgrade my 4 year old Ideapad Y550 and I am quite happy with my U310 so far. One thing I would like to change though, I've gotten used to one-finger scrolling using my Y550 and I would like to have that back. Is there any way in the U310 to chage to one-finger scrolling from two-finger scrolling? Thanks!













Solved!

Go to Solution.

Answer:Ideapad U310 Touch single finger scrolling

This is based on the Elan touchpad. Do you think the one finger scrolling is similar to the edge swipe? Maybe its not enable. Two or more finger scrolling is under multifinger configuration menu. But there is no scrolling option in One finger menu but only the edge swipe option.

9 more replies
Relevance 80.36%

How can I do, Eventhough I try to in stall ISD Driver or anything else. Anyone can give me the recommendation?

Answer:Please help I just unpacked X220t but the Finger Touch Function is not work

did you get a X220t with Multitouch?

5 more replies
Relevance 79.54%

I HAVE A X200 TABLET 7449-9EU IM TRYING TO FIND OUT IF THIS MODEL IS FINGER TOUCH COMPATIBLE IF SOMEONE CAN POINT ME IN THE RIGHT DIRECTION I WOULD BE GRATEFUL.

Answer:X200 tablet how can I find out which models are finger touch compatible

Well I would say that the most empiric way to do it is just try to touch your screen on some dialog boxes or pictures where gestures would trigger a reaction from the computer..... Indeed it's not very easy to figure it out from Lenovo support website ... I tried the product number but this only gave back basic characteristics of the machine, not the exact type of display/screen  I know mine is wacom enabled and (finger) touch compatible and I think I figured this out by... trying  http://shop.lenovo.com/us/landing_pages/multitouch_technology

2 more replies
Relevance 79.54%

How can I turn off mini scrollbar when scroll using two finger in synaptics touch pad? It is very irritating even when I finished scrolling and want to move cursor to another place, it sposmadically continue scrolling  frequently.

More replies
Relevance 79.54%

Just 2 days ago, a Lenovo staff on chat said that the X220 Tablet with Outdoor Display supports touch inputs but only for single finger actions.  He was very sure but then several posts on this forum seem to indicate that it has only the pen input. Can someone please confirm? 2. If the Outdoor model supports single finger input, is the display capacitive touch? 3. On the Multi-touch model, will the 2-finger scrollling, 5-finger gestures, etc. work in every application or is it application dependent? Thanks much for your help.  

Answer:Lenovo staff says Outdoor Display is one-finger touch activated

I have the Outdoor as of yesterday, and it is not a touch screen.  It is Pen input only.  Can't speak for the multitouch models. Cheers,Gigs

2 more replies
Relevance 79.54%

My 7840's touch pad "One Finger Scrolling" functionality has become inconsistent.  It had been working fine by using the 'DellTPad.exe' application and selecting (if memory serves) 'one finger gestures'.  That option is now gone however one finger scrolling still works for awhile, and then fails and the only option to scroll using two fingers. A reboot fixes it for awhile then it starts all over again.  This problem coincided with a recent round of updates, though the touch-pad driver was not one of those updates. 
Any ideas out there?

More replies
Relevance 79.54%

Hi guys I have not been able to use the touch screen functions for about a month now.  the pen works fine ,  but the finger touch go nuts after a few minuts. in theose few minets the screen start to missed up ,  and the touch finger do what ever he wants on the screen  you can see a lot of finger touching everywhere. what can be the problem? do i need to replace the screen? or it's driver problem?.. Any suggestions please. Thank you in advance! Dan.

More replies
Relevance 79.54%

cant seem to find out how to turn off the 2 finger touchpad zoom option

Answer:touch pad 2 finger zoom option on my laptop is driving me nuts!

Search "Mouse" in start menu, after the dialog window opened, go to the right most tab.

2 more replies
Relevance 79.54%

I'm befuddled. Two finger scrolling in Windows 10 dialogs, applications and Internet Explorer/Edge all works perfectly. However, Chrome is far too sensitive and the page blazes past. I can't adjust the scroll speed in settings because that affects all other apps (in other words they'll become way too slow!) Just to make matters more confused I've also got a Logitech mouse and the scroll wheel works fine everywhere - and this means if I install an extension in Chrome to configure scroll speed to work with the touchpad I will have slowed it down to a painful rate using the scroll wheel. Any clues how to configure Chrome two finger scrolling correctly? Is this an issue with the trackpad or Chrome?

More replies
Relevance 78.72%

Hello every bodyI just bought an x201 tablet pcX201 3093-bf8After a clean install of win 7 64bits the touch screen didn't workI got no pen with it and i counted on using one/mutlitouch finger.I almost installed all the available drivers and tested all available solutions but it still don't workCould someone please help meThank you 

Answer:lenovo x201 tablet 3093-bf8 support multi touch??(pen & finger)

3093-bf8 does not appear in the tabook reference so it was probably a custom build. Most X201 tablets do not support finger touch, but you can find the screen FRU by entering your serial number here: http://support.lenovo.com/en_US/product-and-parts/partsLookup.page

2 more replies
Relevance 78.72%

i guys im new in the form. i ve got a lenovo x201 tablet.im wondering about the multi touch option.Does x201 tablet 3113-94U support multi touch or only pen. And also i coudnt find my model type in lenovo.thats kind of weird Thanks for everything

Answer:lenovo x201 tablet 3113-94U support multi touch??(pen & finger)

Hi, btoymus23
 
I did some research on your machine and found its entry in the Personal Systems Reference. Machine type 3113-94U does not support MultiTouch, unfortunately. This information can be found in the link on page CML3-4 (use Ctrl+F to find it faster.)
 
MultiTouch, however, means to be able to use three distinct points on a touchscreen at once, not being able to use different touch inputs. I think you should be able to use your fingers to touch objects on the screen, though the pen might be easier.
 
Hope it helps,
Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

2 more replies
Relevance 76.26%

This model is not in the compatibility list: https://support.lenovo.com/br/pt/documents/ht103535.My question is if it is definitive or it would be compatible any time in the future. Does Lenovo have plans to get this model compatible with the OS?I tried to upgrade a couple of months ago and had a lot of problems. I had to go back to 8.1. 

Answer:Windows 10 upgrade for Z400 Touch

My guess is that if it isn't on the list now, it won't be later. That doesn't mean it won't work. What kinds of problems did you have?

2 more replies
Relevance 76.26%

I'm VERY disappointed to find that my Z400 Touch is not supported for the Windows 10 upgrade! 
Looking for info to see if it's worth trying to work around the issues:
  Specifically which hardware components are incompatible with Win 10?
  Has anyone tried the upgrade dispite the potential issues?
  If so, what were resulting problems/issues and fixes for them?
Many thanks for any possible assistance!
 
 
Mod's Edit: Changed Font size to something a little more reader friendly













Solved!

Go to Solution.

Answer:Windows 10 upgrade on Z400 Touch?

intel video driver ( for win 8 or 8.1) is not compatible with win 10. Lenovo has processed drivers and so far they have not done. I have 2 years old z 500 - never again lenovo.

3 more replies
Relevance 76.26%

Read a Rich Edmonds article on upgrading an HTC Touch Pro 2 to possibly RT. Looking for precise guidance on how to do this. Guidance sought

More replies
Relevance 75.44%

I know that you can play games like XCOM and Master of Orion II on a touch screen laptop, though I was wondering: can I play something like XCOM, while still using touch to play the game?

Answer:Can a touch screen laptop play non-touch screen games...with touch?

I play World of Warcraft which was definitely not designed for touch screen and can interact with the interface just fine on my yoga.

1 more replies
Relevance 75.44%

Hello,
I recently purchased an XPS 15 9560, Windows 10 and am having the trackpad dead zone issue (the pointer does not move until I move my finger about 1/4"at which point it has perfect response / tracking / precision). Each time I start to move the pointer using the trackpad I must go through the dead zone prior to the pointer responding normally. The dead zone appears to be a circle around the spot that I touch the trackpad.
When I disable the HID trackpad device in device manager, this dead zone problem is eliminated. Is there a way to access the trackpad driver registry settings to see if there is something I can change that will eliminate the dead zone?
Alternatively, is there a way to find out which trackpad brand I have that will allow me to try a different driver? I tried the Synaptics fix but I was not happy with the two finger scroll performance even after changing the registry settings.
Thank you,
Joe

More replies
Relevance 75.44%

Can any one help me knw which part is called the touch panel????.
My lumia 925 screen has cracked but the touch and screen under the crack is all fine and working normal. Which part do i have to change ??? just a screen will do ??? i have searched online and most of them say Touch panel so pls help me understand what is a touch panel also if possible approximate price of one.

Answer:What is a touch panel of Lumia 925

There is no touch panel in nokia Lumia.

4 more replies
Relevance 75.44%

hi everyone.. i got my new s10-3t 2 weeks ago but unfortunately i cracked the touch screen.. the LCD itself is working fine.. any advice other than taking it to support? (local lenovo service center couldn't help out)













Solved!

Go to Solution.

Answer:S10-3t cracked touch panel

Hi and welcome...
You broken that touch panel by an accident... thats bad luck.. but in that case , you have to pay for that..
 let it send in for repair at your own cost.. ask your local service center... or buy a new one , sell the broken one...
 
 
sincerely KalvinKlein

6 more replies
Relevance 75.44%

HiThis is my first post in this forum  so I'd like to take the opportunity to say hello to everyoneHere is my problem:  I have brought from  ebay  an x60 tablet  6364-AH6 for £110 pound which has a broken screen, thus, the cheep price..     I need to buy a second-hand screen and I have found this  HT12X21-351 screen but I can't find any details about it. The seller told me that it come from an x60 but he couldn't tell me if it is multi-touch or if it work just with the pen. Does anybody know?? Thank you very much in advance for your help.

Answer:HT12X21-351 touch panel

http://www-307.ibm.com/pc/support/site.wss/MIGR-67024.html#xga+ it looks like that screen is pen only.  here's your parts list. looks like it came with 3 different screens.  you want the part numbers for the digitizer with touch.  the other 2 don't have touch.  

1 more replies
Relevance 75.44%

I have cracked my touch panel on my s10-3t. Lenovo have said its not covered as it was my fault which is fair enough. So im looking to find out about the screen/touch panel Are they separate? What do i need to replace? How much am i looking at? any help will be greatly appreciated. cheers

Answer:S10-3T Touch panel cracked . . . HELP!!!

Call Lenovo again and tell them that you want to replace it. They will tell you how much it is.





IPnaSh First Spanish Community Guru - Colaborador ad honorem

2 more replies
Relevance 75.44%

i have installed windows 7 and i am not able to use Touch inductive panel. i dont what the matter is i only saw this working properly when vista was installed on it and since i have removed vista it has stopped working. i installed windows 7 again so that if there would be some problem in the windows but i am facing the same problem.kindly help me out













Solved!

Go to Solution.

Answer:Touch inductive panel

i am using ideapad y 450

2 more replies
Relevance 75.44%

Over the keyboard there is a touch panel with sound settings and wi-fi turn on/turn off. Sound settings are stuck (so minus or plus is blinking) and everything hangs. Could I do something with that or just turn off this panel? How could I turn it off?Thank you!

More replies
Relevance 75.44%

I just got my new laptop and I think the button for "Open Dolby function setup screen" might be broken, as nothing happens when i press it. The other "Inductive Panel buttons" work fine. I was wondering if there was a way I could access the "Dolby function setup screen" manually, without the use of the inductive panel button? Also, this is the U110 model downgraded to Windows XP. Message Edited by kevl510 on 02-03-2009 11:02 AM

Answer:Touch Inductive Panel

Thus far, there has been little [if any] success in keeping Dolby functionality after downgrading any IdeaPad to XP.





\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

2 more replies
Relevance 75.44%

Hi there!After upgrading my note to Windows 10 touch screen does not respond. How to fix it? Thank you!

More replies
Relevance 75.44%

So after much hesitation, I just upgraded to windows 10. Now I regret it. I used to be able to scroll via touchpad, now I can't. I looked up solutions and tried to go to Snaptics (On my computer it says 'Snaptics Clickpad V8.1' if that tells you anything), but when clicked it says: "Unable to connect to the Snaptics Pointing Device Driver. If you have installed another PS/2 pointing device driver please uninstall the snaptics driver by clicking on the yes button. you then need to reinstall your pointing device driver for your external device again. Do you want to uninstall the snaptics driver now?" And then gives yes or no options I'm not sure what this means, or what I need to do to fix it. Any help is appreciated!










Solved!
View Solution.

Answer:Touch pad scrolling not working, Windows 10 upgrade

Hi, Try the following. First, download the Synaptics software installer on the link below and save it to your Downloads folder. http://ftp.hp.com/pub/softpaq/sp72001-72500/sp72344.exe Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall. When this has completed, restart the notebook. When windows has fully reloaded, open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again. Open windows Control Panel and in the top right, next to View by: select 'Large Icons'.  From the new layout, select the Synaptics entry and check that the scrolling options are checked and Save any change - see the image below.  Regards, DP-K

6 more replies
Relevance 75.44%

Hi,I'm using U310 Touch comes with Windows 8.0, trying to upgrade to Windows 8.1 many times and got the error code:  0x80240031.
 
Try the factory restore and upgrade again, same error code, also try WiFi and Ethernet connection and same error code.
 
Any idea or resolution ?  I need to upgrade to Windows 8.1 in order to install apps cause it required Windows 8.1 to install.
 
Many thanks in advance.
 
Link to picture
 
Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums

Answer:U310 Touch Windows 8.1 Upgrade Problem

roxy2k wrote:Hi,I'm using U310 Touch comes with Windows 8.0, trying to upgrade to Windows 8.1 many times and got the error code:  0x80240031. Try the factory restore and upgrade again, same error code, also try WiFi and Ethernet connection and same error code. Any idea or resolution ?  I need to upgrade to Windows 8.1 in order to install apps cause it required Windows 8.1 to install. Many thanks in advance. Link to picture Moderator note; picture(s) converted to link(s) About Posting Pictures In The ForumsTry the update troubleshooter then check if you installed the required updates. See this link.

3 more replies