Computer Support Forum

Yoga 2 - grinding noise when pressure applied to bottom

Question: Yoga 2 - grinding noise when pressure applied to bottom

title says it, whenever i apply any pressure to the underside of my laptop the fan grinds to a stop and starts up a second later. this will happen at the slightest nudge, i cant even pick it up without it grinding. ive had this laptop for maybe 8 months, never bought any warrenty (regretfully). ive used compressed air, never taken it apart to figure out whats up (cant find the right screw, its almost like the dont want you to open them.. mysterious.... ) id like to avoid taking it to get professionally fixed, im a fairly poor person (still havent gotten my usb port fixed bc lack of funds) i hope the fan isnt messed up. ive never dropped it, or dropped anything ON it or anything like that. it started out with just a little whirring more than usual, and over the course of a few months it progressed to this.





Yoga 2 13"Windows 10

More replies
Relevance 100%
Preferred Solution: Yoga 2 - grinding noise when pressure applied to bottom

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 104.96%

The title says it all, the area is near the windows 8 sticker but about an inch closer to the edge of the laptop this is VERY annoying because it's very sensitive and the audio will occasionally cut off when I sit it on my lap.

Answer:Y40 Audio stops when a small amount of pressure is applied to the bottom of the laptop.

Hi Averagevoid,
                           
Welcome to Lenovo Community!
                                                     
As per the query we understood that you are facing issue with audio stops in your Lenovo Y40 laptop.
 
Please connect the headphone or earphone and check for the issue.
 
Also try to update the audio drivers and check for the issue.
 
Click here for audio driver if the operating system is windows 7.
 
Click here for audio driver if the operating system is windows 8.1.
 
Hope this helps. Do post back if issue persists!
        
Best regards,         
 
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 96.35%

Hi everyone, Has anyone noticed any issues with their W530 hanging when picking the unit up or applying slight pressure on the bottom right side while typing? My video sometimes goes haywire when this happens and its a telltale sign that my system is locked up.  I think i may have a damaged mb internally but just wanted to see if anyone else has seen this same issue or something similar.  Thanks!

Answer:W530 Hangs when slight pressure applied to bottom right side or picking laptop up from that side

Reseat the ram and hdd.

3 more replies
Relevance 86.1%

To start, I have seen the thread about a high pitched noise issue with this device's fan, and I don't think my problem is the same one. I have an ongoing issue with my Yoga 3 (full specs below), where for most of the time that the fan is spinning, it makes a loud grinding noise as if there's something stuck in the fan or the blade is off balance. I've only had the laptop for six months and it wasn't a problem when I bought it - it's developed since. The fan still seems to cool the laptop properly, and I've had no warnings from the device, but it's audible in quieter rooms and definitely isn't normal. I've installed the BIOS update that was recommended for a similar fan issue, and I've used OneKey Optimiser to run the fan cleaning tool several times - nothing has changed so far. I'm not sure what to do next. Should I attempt to open the machine and clean the fan unit with compressed air/investigate further, or should I contact someone about a repair? Thanks Aaron













Solved!

Go to Solution.

Answer:Lenovo Yoga 3 1470 Fan Grinding Noise

Hi aaroncawte , 
 
Welcome to the Community Forums. 
 
As what you have already described , seems that you have done what is needed fro the fan noise issue. 
Noting that the issue is mechanical in nature , please give tech support a call for the needed service . 
No need to open the chassis for further steps not to invalidate the seal / warranty and have the tech run further check.
 
You can however run Lenovo Solution Center for the hardware test just to check on other parts that can also be affected and likewise temperature check at the moment of the noise for baseline data. 
 
You may reach them at : 
English  0333-777-3991 (National Rate) 9:00 - 18:00 Monday - Friday  
 
Update us how it goes.
 
 
Regards

1 more replies
Relevance 86.1%

 There is a loud griding noise whenever my wife's brand new Yoga 13 is titled in any direction.  It seems like a simple gyroscopic effect causing the fan to bang in to case.  It also seems like something that shouldn't be happening.  Is this a problem that other people have experienced or is there something wrong with this machine? Thanks













Solved!

Go to Solution.

Answer:Loud grinding fan noise on brand new yoga 13

Hi Jay,
 
please see this blog about Yoga 13 fan hitting the metal housing...
http://uselesspuzzles.blogspot.com/2012/11/how-to-fix-lenovo-yoga-fan-noise.html
 
maybe best to consult Lenovo Tech Support about a possible fan replacement...
http://support.lenovo.com/de_DE/feedback/detail.page?LegacyDocID=MIGR-76613
 
Zehn

3 more replies
Relevance 78.72%

Hiya.I have an HP 15 - f305dx  that I bought from Best Buy around late August 2015.It hasn't given me any problems, which is wonderful, except in the last month or so I noticed when I add a bit of pressure to the lower left side of the laptop (below the keyboard) it makes a very loud (initially very scary!!) whirring noise. The laptop itself doens't do anything when it happens; it continues to run normally.Now the issue has more or less worsened such that any slight amount of pressure to the free space below the keyboard initates the whirring.My vents are clean, and I don't have any heavy programs (I use this laptop for school mostly); the whirring usually lasts as long as there is pressure.Anyone know why?Thanks.

More replies
Relevance 77.08%

Certain keys on my laptop has started to fail. It started with the F2 key,then the F5 and now the backspace key. They work when they are pushed down hard. Do i need to change my keyboard.













Solved!

Go to Solution.

Answer:[SL410:2842RK1] Certain keys work only when pressure is applied

Welcome to the Forum! First thing I would do is give the keyboard a thorough cleaning. This may help to relieve the "sticky" keys. Use a 50/50 mix of rubbing alcohol and water and follow the Keyboard cleaning instructions here: http://blog.lenovo.com/design/keeping-your-thinkpad-clean There is a method for changing out individual keys. However, it can be slightly tricky (if it's your first time) and might not be worth the hassle. Plus, this may not resolve the issue. Ordering a genuine Lenovo new or used and properly tested keyboard is probably your best bet. The cost to replace the entire keyboard (from your location) may not be much more than ordering and fiddling with 3 different keys. You may use the part numbers in this document to assist your search: Keyboard service parts - ThinkPad L410, L510, SL410, SL510 Here is a useful guide for removing and replacing your keyboard: Keyboard removal and installation - ThinkPad L410, L412, L510, L512, SL410, SL510. And here is your Hardware Maintenance Manual.





_________________________________________________________Have a great day. (I do not work for Lenovo)

1 more replies
Relevance 76.26%

If you apply any more than featherlight pressure to this touchpad, mouse movement stops and becomes jumpy. Up to date on all drivers via windows update. We have tried disabling all the settings w/ D&Drop, Click, etc. but it still does this. Is there any hope for this? 

Answer:Elan SmartPad TouchPad on V560 cuts out if any pressure is applied

By the way this happens with and without ELAN SmartPad drivers. If I just use the Windows PS/2 Mouse drivers it is the same problem.  Is this how the SmartPad is supposed to work? Do we have a defective unit?

4 more replies
Relevance 66.01%

Hello, Im getting a nasty noise from my pc at start up, never on restart. Ive had the cover off and tested the PSU but its fine ,also replaced fan on heatsink, it made no difference. Its definitley coming from the heatsink or CPU, very odd. Luckily I have a new motherboard bundle waiting for Xmas! Everything backed up. Cheers.
 

Answer:Grinding noise From CPU?

Stop each fan in the system one at a time. Use something like a coffee stir stick to hold the fan blades. Insert the stick before you pw ON not after.
 

1 more replies
Relevance 66.01%

Hi, can any one advise me? I have been getting a grinding noise from my PC roughly monthly since I obtained it in Nov. 2004, I think it may be when I push it a little??could this be the hard drive protesting ? it`s a pentium 4 3000ghz, asrobs.

Answer:GRINDING noise from PC

Some hard drives can get noisy when there is a lot of disc activity.......I have an IBM Deskstar 80GB drive which sounds a bit like a boiling kettle when working hard.It has done for the 3 years since I got it.Also some fans will speed up when temperatures rise and can become very loud.If this noise is infrequent,only happens when you are working the pc hard and most importantly not getting worse over time then I would be inclined to ignore it.If it's annoying you then you will need to track down the culprit and consider replacing it with a new quieter version.

1 more replies
Relevance 66.01%
Question: grinding noise

hi guys
i have a problem everyday my computer make a grinding noise and during
that time my computer is frozen , i cant do nothing until it stop by itself.
does it mean i need a new hard disk or can i fix it.
thank you in advance
icedtea2002
 

Answer:grinding noise

6 more replies
Relevance 66.01%
Question: Grinding noise?

Hello. I've been hearing a grinding noise for sometime on start-up on my PC. Occasionally, the PC will pretty much hang at the windows XP logo. When this occurs i just hold in on the power button and go through the boot process without any problems. However, the grinding noise that comes at the start is very loud and doesn't sound healthy at all. I've opened the case and there's no cords in the way of the fans. What could the noise be? Should i have concern? My computer runs fine after the noisy few seconds into the boot but becomes normal after it passes the windows XP logo.

My specs:
nVidia 8600GTS card 256 GPU
amd 3800+ 2.4 GHz
1 gig of ram

For more detail:
http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN
But my card gcard is now nVidia 8600GTS card 256 GPU.

Sorry this is confusing. Tired after the holidays :) thanks for any/all help.

Answer:Grinding noise?

try and isolate if it is coming from a drive or a fan
did you upgrade the psu when you upgraded the video

1 more replies
Relevance 66.01%
Question: Grinding Noise

I have an Everex Explora, AMD Athlon computer and at the start up and when I am searching for info it makes a grinding noise while it is loading the information. Also twice last week after typing and searching for what I wanted I heard a loud grinding noise. Not knowing anything about computers I have no idea what is the problem. Any help would be appreciated.
 

Answer:Grinding Noise

Hi lag
Grinding noises aren't good. It sounds like you hard drive is going. I would back up your important data NOW. You can run a scandisk (surface scan) and defrag to help test out the hard drive. Many manufacturers of hard drive also have utilities on their web sites you can run to test out the drive. Is your system under warranty? Many hard drives come with a three year warranty.

[Edited by Lurker1 on 06-19-2001 at 01:04 PM]
 

3 more replies
Relevance 66.01%
Question: Grinding Noise

Hello, I have recently heard what sounds like a grounding noise coming from my computer. I usually only notice it when the computer is searching for something (say a Google search), and I seem to especially notice it while searching on e-Bay. Once the site or page is found, it then stops making that sound. Is this something I should be concerned about? Is there anything I can do to stop it, or repair it? Does this mean the hard drive is about to crash? I have a Dell Computer, and Windows XP system. Thanks for the help.
 

Answer:Grinding Noise

Just to be on the safe side do a back up if you havent done.Open the case and try to isolate the noise.
 

3 more replies
Relevance 66.01%
Question: Grinding Noise

Hey guys, I logged on this morning to my pc and started to play a game and all of a sudden every few minutes the game would just crash for 10 seconds or so then be fine. When the crash happened i couldn't press Ctrl+Alt+Del so i know it wasn't the actual game itself crashing or losing connection etc.

So then i decided to take off my headset and try see if there was any strange noises and there was a really weird grinding noise for 2-3 seconds.. then game pc crashes then 10 seconds later everything is perfectly fine.

Anybody had this issue or know any solutions? If you need any additional information don't hesitate to ask.

Thanks in advance, Pompey.
 

Answer:Grinding Noise

Oh my god, not long after writing this thread... Now my PC just turned itself off without any warning, bleeps or grinding noises. Didn't even reboot, just switched itself off.

When i boot up my PC, i don't get no errors, it boots up as quick as it ever has.

Microsoft XP S3 Pro

Intel core 2 DUO CPU
E4600 @ 2.40ghz
2GB RAM

Graphics; Nvidia Geforce 9600GT
 

8 more replies
Relevance 66.01%
Question: Grinding noise?

can someone please help me?
just a few minutes ago i was simply browsing and heard a loud grinding noise from my pc, i checked all the fans and it seems to be from the gpu, i restarted pc and still goes on. i left it off for now but i cant seem to find the cause, nothing is hitting anything
help?
thnx

Answer:Grinding noise?

You wouldn't be able to see anything. The grinding noise occurs when the ball bearings go ( at one point the balls start showing wear and don't run "round" anymore, causing the fanblades to tumble.)
Simple solution: you need a new fan. In cases of emergency (like you can't get your hands on a new fan anytime soon) there is a way to prolong the life of the fan a little bit. You get some graphite powder from your automotive supplier, peel back the fan label and carefully put a little bit onto the center of the fan.
I really mean CAREFUL the stuff is worse on cloth than laser toner
Make sure to put the label back on and don't use any form of oil..it will only cause a mess.
-DG

5 more replies
Relevance 65.19%

Hi all,

My laptop fan is making some pretty weird noises and some of them sound pretty bad; when the laptop turns off the fan kind of clunkclunkclunks to a stop and I'm worried that the fan might not be spinning fast enough to cool the laptop. I've looked at how to replace the fan and it involves taking pretty much the entire laptop apart, is there anything else I could/should be looking at, trying to do, etc, before I go all in? The only thing I can think of would be to get a can of compressed air and try to give it a blast and maybe dislodge something; I just thought it would be worth asking before going through the trouble of taking the laptop apart plus the expense of buying a new fan. My laptop is an HP pavillion dv7.

Thanks a bunch for any help,
J
 

Answer:Laptop fan grinding noise?

It might be an idea to get a program such as Speccy (Google it) and check the temps on your CPU, if the CPU is too hot, i would see if you could get access to the fan, clean and clean it out with a can of compressed air (Or a vacuum but that may damage components, i wouldn't recommend it but i do it personally) and if that doesn't help take the fan off and use an alcohol wipe to clean off the grey compound on it and replace it with some fresh thermal compound (There are plenty of youtube videos on how to do this).
 

3 more replies
Relevance 65.19%

My y510p is making a small grinding noise by the hdd is this normal?
 
Moderator note: off-topic post moved to its own thread.  Subject edited to match content.  Was:  Re: IdeaPad Y, U, V, Z & P series 2013 shipping discussion

More replies
Relevance 65.19%

Well the thread says it all. I have a DELL PC a year or 2 old, and the CD ROM is starting to make this grinding like noise, for a split second only, when a CD spins down in the drive.

Does this mean the CD ROM drive is about to go? How much longer do you think it will live?

Should I start using the DVD drive to play CDs and games? Will this hurt the DVD drive?

Well that about wraps it up I think.
 

Answer:CD ROM and grinding noise when cd spins down

take the cd rom drive out of the pc and shake it. If you hear anything bouncing around inside then something might possibly be broken. As for your dvd drive, no playing cds and games won't hurt it. In fact I would recommend using it. Besides you can get a new dvd burner for like thirty bucks now so if it does break, who cares, they're cheap!
 

3 more replies
Relevance 65.19%

I am struggling with Grinding noise while using my HP Laptop-HP G62 Notebook PC. I have cleaned the Vents using Compressed Gas Can, but this did not help much. Checked HP Support Assistant for possible driver/software updates, but no updates are available.

More replies
Relevance 65.19%

My w550s laptop fan is making a loud grinding noise whenever I turn it on.  I've tried cleaning and then replacing the fan but the issue persists anyway. Any tips on how to resolve the issue would be greatly appreciated. I've attached the sound for reference. https://drive.google.com/file/d/0B4rjnLAA0hh8c0NBVWphbVlUMzQ/view?usp=drivesdk (it sounds like a bearing is loose but I'm not quite sure) 

Answer:W550s fan grinding noise

Welcome shadowsonmywall1. Is your CPU and GPU running hot when the laptop fan is making a loud grinding noise?2. Did you remove the thermal paste before replacing with a new fan?3. Have you tighten all other screws on the laptop fan?
4. Use grease to oil the bearing of the fan.
 
Peter
ThinkPad X40 | ThinkPad W520 | ThinkPad T560 | ThinkCentre E73 SFF | Yoga 11s | Yoga 3 Pro | Yoga 900 | Yoga Home 900 | Yoga Tablet 2 Pro | Miix 2 10" | IdeaPad Y460p | IdeaPad K1 | 3000 Y300 | Vibe K5 Plus
Give kudos to reward people for their assistance | Mark thread solved if the solution works | I am an active volunteer, not an Lenovo employee
=====================================
List of Sound Enhancement Thread
T520 | W520 ; Dolby ; IdeaPad Slate Tablet ; Yoga 3 Pro ; X100e ; Vibe Shot ; Yoga 900 ; P50 ; P40 Yoga | Yoga 14 | Yoga 460 ; T560 | P50s ; Vibe K5 | K5 Plus ; M0620 Speaker Mod

1 more replies
Relevance 65.19%

hi friends

everything was fine .. i reinstalled firefox3.00 for some internet purpose now internet was ok.. but when i restarted Firefox again after a reboot it noted me that "Firefox not able to start sorry for the inconvenience" .and the i noticed some kind of grinding noice from my system..

so i checked my cabinet all was fine and finally noticed that the noise was from the speakers...

and i noticed the noise was associated with the hdd data reading which was indicated by the hdd light on the cabinet..

i thought this is the problem of firefox so i reinstalled to the latest firefox the problem still continues...

other things i noticed along with this problem is that

the windows boot up time is long than wat it was before the problem.. but after boot up everything is fine except for the grinding noise from speakers..

i test my system with directx diagnostic tool ..everything is fine

i suspected my hdd and made a long test with seatool hdd test tool everything was fine
i have smart enabled on my hdd

there is this cricking noise along with the audio which is also distrubing my adio and video play back

i am confused wat might be the problem.. that noise is disturbing the regular sound pattern of my system

i tested my speakers with external devices the sound was crystal clear

my sys config is
c2d 1.86
intel 946mobo
3gb ram
160 sata hdd
nvidia xfx 8400gs overclocked rivatuner
creative 5.1 speakers

plaese help me
&nb... Read more

Answer:Grinding noise from speakers help

when a card goes bad sometimes it doesnt properly filter out noise. if they play fine on like an mp3 player or another computer you may want to look at replacing the card. theyre cheap enough now
 

6 more replies
Relevance 65.19%

I have an older laptop that we use infrequently here in the office, and it's making a pretty loud grinding noise. I looked into this a bit on-line, and everyone seems to agree that this probably means the hard drive is going. I just want to confirm a few things with an expert before I proceed:

1) Is there anything I should try to get rid of the grinding noise before I just pack it in and trash this laptop?

2) Although the laptop is older, I really don't want to trash it. Does it make sense to buy a new hard drive?

3) If I do buy a new hard drive, is that the kind of thing that I can install myself, without too much experience? Can you guys help me through it?

4) Do you have any suggestions on where I should go for the drive and what I should get? (It's a Dell Notebook)

Any assistance is very much appreciated!
 

Answer:Grinding noise from laptop

What operating system is it using? W98? W98SE, ME, XP or what? What make and model of laptop? Beware there may be limitations on the capacity of the hard drive that the OS/BIOS will accept. Can you get a copy of the manual, either from the office, or via the net, or makers website? Also there may be limits on the anount of RAM that can be installed if you want to upgrade. let us know and someone here can probably help.
Can the IT representative at your office help with further info? Bazza

===





Lydster said:



I have an older laptop that we use infrequently here in the office, and it's making a pretty loud grinding noise. I looked into this a bit on-line, and everyone seems to agree that this probably means the hard drive is going. I just want to confirm a few things with an expert before I proceed:

1) Is there anything I should try to get rid of the grinding noise before I just pack it in and trash this laptop?

2) Although the laptop is older, I really don't want to trash it. Does it make sense to buy a new hard drive?

3) If I do buy a new hard drive, is that the kind of thing that I can install myself, without too much experience? Can you guys help me through it?

4) Do you have any suggestions on where I should go for the drive and what I should get? (It's a Dell Notebook)

Any assistance is very much appreciated!Click to expand...


 

7 more replies
Relevance 65.19%

I have a Gateway PC with ME, 1.3 processor, 640 ram. Three yrs old. It will not boot up. I turn PC on, and I get to first screen, and then it bumps and grinds and whirs and chirps, and beeps. I hit F1 key and get a message that operating system cannot be found. I tried to boot from a Norton rescue disk but no good. It sounds like fan motor is on. Last week, the PC started to cut off (power) for no reason, randomly, and I would have to reboot. Has my hardrive crashed? Might it be something less severe?. Please help? Thank you. RD.
 

Answer:Grinding & beeping noise

6 more replies
Relevance 65.19%

When I boot up my y470, the fan makes a grinding noise for about 3 seconds,  then is perfectly normal. I think there's something wrong with my fan's bearings, even though it's only 2 weeks old (terrible manufacturing quality apparently). How do I go about putting my warranty to good use here? I'm in Canada.

Answer:Y470 fan grinding noise

http://support.lenovo.com/en_US/product-service/service-provider/default.page
 
Canada, right?
 
Dave

1 more replies
Relevance 65.19%

Hi,
Our NEC Superscript 870 printer works ok for one or two pages at a time: anymore than that and it begins to make a grinding noise and then a paper jam. The grinding noise seems to be coming from the right hand side, perhaps from the gears under the brass clips that are under the toner cartridge. The teeth that are visible seem normal. Suggestions?
Steve
 

Answer:NEC Superscript 870 grinding noise

6 more replies
Relevance 65.19%

i had my sony viao for almost 2-yrs and i'm starting to hear a grinding noise from my hd. i initially noticed it when i turned it on. it made this loud grinding noise for over 10-mins then it disappear (pc still made typical very noise) and after 3 days the hd made the same noise (again for ~10-mins), but not as loud when i turned it on, still loud enough to notice and the grinding noise wasn't consistent either, a few time it was like grinding down then speeding up again
should i start looking at new hd, will i be able to rescue my files if my hd just decides to stop working or decides to boot up
i normally keep my pc on for 5-days and i know i'm not the only one so i don't think that's the reason
also most night, i keep my pc busy all night long encoding movies for over 10-hrs, can that be the cause
 

Answer:hd making grinding noise

Any information of value should be backed up. Hd can die at the drop of a hat.

But are you sure its the hd and not a fan.
 

3 more replies
Relevance 65.19%

Title says it all. I am not very familiar with Computers, but I know my stuff.

I have an ASUS P5Q-E Motherboard, and an Intel Q9950 processor. I also have the Antec Twelve Hundred gaming case, with a Zalman cooler on top of all that.

I smack the side of the behind the cover, and sometimes it will go away, but that's horrible for the machine. It is not the cooler, because I have tried moving it while the PC was running, and no problem. I smack the top of the fan on the top, the muffles, and comes back. It is not the Hardrive, or any External fans, because the noise is coming from the top, back right corner of the PC. I turn the speed of the fan on the top down, there is no change of sound, and there are no wires interfering with the fans.

Any help would be appreciated.

--Icedgreece.
 

Answer:Grinding Noise coming from the CPU, or top fan.

13 more replies
Relevance 65.19%

Hello. Currently i Have in my PC:Q6600 2.4 ghz8800gts 312 DDR32gb of ram500gb WD sata HDDSound Blaster Audigy500watt PSUAlright so my computer has up and decided that it hates me. For about three months it worked without any major issues. I noticed some absurd artifacting with my GPU but decided i'd just replace it eventually. My problem is that recently my computer has gone nutty. Whenever I decide to do anything (open photoshop, install programs, ect) it starts to give me laggy sound. Windows itself takes about 5 minutes to get past that initial loading screen and then 1 or 2 minutes to actually load my user. Under a normal circumstance I would just guess CPU but it's stranger. Once photoshop opens it gives a GPU error, whatever, I get it, it's broken. Yet it works fine, no lag, nothing. I render videos, and nothing. I open fallout 3 and it lags until it gets to the menu and the sound is fine for the rest of the game. It seems to only lag on loading screens. About an hour ago I started hearing loud grinding noises from inside my case. All of this leads me to believe it may be my HDD. It seems that the sound skips any time the HDD is accessed but I'm not sure. So I wanted to get a second opinion.I ran a CPU stress test and it never got above 60C at 100% for 3 hours. I ran a ram test for 20 minutes with 0 errors. My GPU gets up to 72C with artifacting almost nonstop In games there are specific models that seem to make the oddest thing ever occur. Giant tr... Read more

Answer:strange grinding noise

Two problems at the same time:1) Hard drive is going bad.  If the grinding noise is coming from the hard drive, that's means it's about to crap out on you.  Back up your data as soon as you can 'cause you may not get another chance...2) Video card.  99% of the time artifacts on the screen mean a video card problem.  The other 1% of the time it's drivers.  So...you have your marching orders.  Replace both the hard drive AND the video card.

1 more replies
Relevance 65.19%

One of my HP laptops, HP Pavilion dv9650us, went off warranty about two months ago. I was using the machine to help fix another computer's problem when I noticed that its dvd-drive is making loud grinding noises and is slowing down the computer whenever I would access the drive. I suspect that the drive is about to die.

I am not sure how long the drive has been doing this since the laptop is being used primarily by another family member.

I purchased an extended warranty through Office Depot, but that family member cannot afford for that computer to be sent off for an unknown amount of time so I am actively considering replacing the drive myself.

I am looking at drives on amazon.com and unsure if a 'universal laptop slimline drive' will fit. Are the drives fairly universal between manufactorers? The current drive is an HD-DVD drive so I was hoping to upgrade to a blu-ray drive. Is it possible?

FYI: These kind of internal laptop dvd drives are not available from newegg or even frys. I'd rather not buy directly through hp.

Answer:dvd drive grinding noise

www.span.com Found a few laptop BD-Roms there. Panasonic makes the UJ-220 for laptops as well. They are a bit pricey. I would google something like 'Notebook Internal Blu-Ray' and see what pops up for you.

1 more replies
Relevance 64.37%

Hi guys (and gals). I posted here a while back and tried to get help with my computer, which kept freezing. The guys who helped me tried every single thing they could think of to try and fix my problem, but to no avail. The only thing the problem could be was a hardware problem, and paying for a new motherboard for a four year old system would have been a waste of money. Nevertheless, I appreciated the help and kindness the forums gave while I troubleshooted my computer. That's why I'm coming here again asking for help. Hopefully this time there will be a happy ending.

In June, with my own saved money, I purchased a new computer. The specs are here:

-ASUS A8V-E Deluxe Socket 939 VIA K8T890 ATX AMD Motherboard - Retail
-CHAINTECH SE6600G Geforce 6600GT 128MB GDDR3 PCI Express x16 Video Card - Retail
-AMD Athlon 64 3500+ ClawHammer 1GHz FSB Socket 939 Processor Model ADA3500ASBOX - Retail
-CORSAIR ValueSelect 1GB 184-Pin DDR SDRAM DDR 400 (PC 3200) Unbuffered System Memory Model VS1GB400C3 - Retail
-Western Digital Caviar SE WD2500JD 250GB 7200 RPM Serial ATA150 Hard Drive - OEM
-Windows XP with Service Pack 2

I put everything together and initially it all worked, however recently the fan which is attached to the heatsink has begun making a very distinct grinding noise upon booting my computer. Waiting until Windows boots seems to sometimes fix the problem, and taking off the case to press against the heatsink seemed to stop it for a small period, however as of two... Read more

Answer:Heatsink fan making grinding noise, help!

Is this post in another thread of any use to you? It may be that the fan is not working correctly in terms of cooling the part (CPU or chipset - not sure which?) and the part is overheating causing the problems. Perhaps you need to reseat or replace the fan and/or heatsink?
 

3 more replies
Relevance 64.37%

Hello, yes i was just wondering if anyone could help me. My dad borrowed this scanner from his friend yesterday. It was wokring fine, but today i tried to scan some pictures and it started to make a harsh grinding noise. My dad told me to unplug it , so i did, and plugged it back in afew minutes later, but it continued to make the noise. Any suggestions on how to stop it?

my operating system is windows xp. im not sure what else you would need to now, so please tell me.
 

Answer:hp scanjet 3670 = grinding noise

This is the best site for sorting out any problems HP related http://h20000.www2.hp.com/bizsuppor...assId=-1&prodTypeId=15179&prodSeriesId=298539
 

1 more replies
Relevance 64.37%

On a cold boot/start in the morning I hear this griding sound for a bit then it goes away. I took the cover off my pc, cleaned everything I could, started again and grinding noise was still there, then went away after a bit. The noise sounds like it is coming from my cpu fan. To me, it sounds like the fan has a wron bearing. I have been trying to find a replacement, but no luck, and I don't know the specs for the fan, so i can't buy an aftermarket fan.I was wondering if anyone knows where I can buy a replacement or maybe a better aftermarket fan that would work. PC: Acer ATC-105-UR11

Answer:Grinding noise on cold start

We suggest you contact Acer support in your region for information on how to proceed.
 
https://www.acer.com/worldwide/
 
 





Links Importantes: Páginas de Suporte Global | Artigos da Base de ConhecimentoRemember to mark posts that resolved your issue with Accept as Solution.

1 more replies
Relevance 64.37%

I recently bought a new PC. A Dell Ispiron 560 (3.2 ghz, 4gb memory, Windows 7, dual core.). I don't want to get big into gaming on it I just wanted a better video card than the crappy one that came with it, so I bought a HIS HD 4670 IceQ 1gb ($60). Because of that I had to upgrade the PSU from a stock 150w to a OCZ Fata1ity 550w power supply. I uninstalled the previous video drivers by going into Device Manager and deleting them. I also used Driver Cleaner Pro. Then I installed and updated the driver for the HIS 4670. Now my computer seems to have minor mouse lag and the cursor plays catch up to where I want it to go. Also while playing some minor games (ex. A.V.A.,Genesis AD, TheHunter, Vindictus) it lags horribly and makes a grinding sound which comes through the speakers, it does this not only in a game but I can be surfing the web and listing to itunes and it will just spazz out making the grinding sound. Any help? Did I screw something up?I tried looking around on Google, but there were no resovled issues. Some were saying it could be a bad PSU or that there is a conflict with Micrsoft High Definition Audio Dirver.Added:I am getting really frustrated with this, I'm 99% sure it is through the speakers. I took out the HIS 4670 and went with the stock video card and it was still doing it, so I thought maybe it might have something to do with the power supply so I switched it back to the 150w one. The lag and noise still continues to happen I don't know what ... Read more

Answer:Upgraded new PC, mouse lag and grinding noise

QuoteI uninstalled the previous video drivers by going into Device Manager and deleting them. I also used Driver Cleaner ProWas this the instructions that came with the new video card? I din't think so.You may have to roll and start over.You have a Dell Ispiron 560. Did you try the Dell site for any information about possible compatibility issues using HIS HD 4670 IceQ 1gb ?I have nothing good to say about 'drive cleaner pro'. Windows is able to install drivers without the need to fourth party software.No persona experience with HIS HD 4670. A few people complain about it, but that may be expected for a high end product now selling at a bottom price.And yes, conflict with audio and video devices is an old story. It is almost always because of not properly installing drivers.As you well know, you have to be very carefully about the physical installation. If so, this You Tube video is not for you, but for others.http://www.youtube.com/watch?v=RPB_uY00_yg

6 more replies
Relevance 64.37%

I posted a message here a couple of weeks ago that the fan was making a loud noise when the system boots. Now it is making the same noise at other times, but not quite as loud. It seems to be getting worse. Someone suggested it is a fan bearing. I would rather not make a warranty claim for this if it is simple to fix.   Would this be a simple fix for someone not experience working with hardware? Do I risk my working on the machine myself.  





______________________________________________________________Machine Type: M90z AIO ; Product: 3091CTO (Custom), CPU: i5-650, Video Card: Intel(R) HD Graphics, Memory: 4.00 GB,Network Card: Intel(R) WiFi Link 1000 BGN, OS: Windows 7 Professional 64-bit

Answer:M90z: Fan making grinding noise

Hello mate, It's quite easy to do. Have a look in the hmm there : http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_pdf/89y8064.pdf Just be aware that changing this part by yourself might void the warranty.





__________________________________________________________________________________Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

2 more replies
Relevance 64.37%

Hey everyone, I built my friend a computer and here are the specs:

Athlon 64 3700+
2x512 corsair value ram
x1800xt 256mb
Asus A8N5x Mobo
Antec SmartPower 500w

I believe that one of the fans is making a strange noise, but I can't really be sure which one. Whenever i go into a game full screen, the noise gets even louder. Even when I am in Windows, when I move the mouse around and click things the fan grinds more, but then grinds less. Anyone familiar with this? Any suggestions?
 

Answer:the mysterious and loud grinding noise

Disconnect any case fans. then you should be able to isolate wheter it is one of them. the CPU or the Video card fan.
 

14 more replies
Relevance 64.37%

Hello to all, I have a new Pavilion 15-bc000nv and after 4 days of use it started a scratchy noise from the left side of the laptop. I see that when the led of Hard Drive switches on the sound comes up (it's like something is scratching from the inside) and when it turns off the sound stops, it's not that loud but when I work at night it buzzes my head and I am worried since the laptop it's brand new. Please help me to solve the poblem. Thanks in advance.

Answer:Hard drive grinding noise

@NIKIKUKO Hello;Allow me to welcome you to the HP forums! This may simply be the sound that the newer drives make -- given that the laptops are thinner than the old ones and more easily conduct the drive sound.You paid for free HP Tech Support as part of the warranty coverage, so you might as well make use of it.While this PC is still under warranty, you should contact HP Customer Support directly to have them put you in touch with HP Technical Support to see what they can do about troubleshooting and repairing your machine remotely.They should be able to tell you if the sound is "normal" or if it indicates a problem with the drive.If you live in the US or Canada, contact information is on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1If you live elsewhere, contact information is on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.htmlNOTE: After you get through, stay on the line until you are finally able to talk to some one -- it can take a while!If you have trouble finding a phone number, then try: 1 (800) 474-6836Good Luck

1 more replies
Relevance 64.37%

Dont know if anyone else has got one of these cards but when ever I play a game on my pc now the card makes a fairly audible grinding noise. Iv tryed the lastest set of drivers but no difference. Has anyone else experianced this or have i just got a bad card?

Answer:Sparkle 8500GT Grinding Noise

I take it that it's your graphics card, sounds like the fan could do with a looking at and probably a good clean to clear the dust build up etc.

4 more replies
Relevance 64.37%

I recently bought a new PC. A Dell Ispiron 560 (3.2 ghz, 4gb memory, etc.). I don't want to get big into gaming on it I just wanted a better video card than the crappy one that came with it, so I bought a HIS HD 4670 IceQ 1gb ($60). Because of that I had to upgrade the PSU from a stock 150w to a OCZ Fata1ity 550w power supply. I uninstalled the previous video drivers by going into Device Manager and deleting them. I also used Driver Cleaner Pro. Then I installed and updated the driver for the HIS 4670. Now my computer seems to have minor mouse lag and the cursor plays catch up to where I want it to go. Also while playing some minor games (ex. A.V.A.,Genesis AD, TheHunter, Vindictus) it lags horribly and makes a grinding sound which comes through the speakers, it does this not only in a game but I can be surfing the web and listing to itunes and it will just spazz out making the grinding sound. Any help? Did I screw something up?

I tried looking around on Google, but there were no resovled issues. Some were saying it could be a bad PSU or that there is a conflict with Micrsoft High Definition Audio Dirver.

Added:
I am getting really frustrated with this, I'm 99% sure it is through the speakers. I took out the HIS 4670 and went with the stock video card and it was still doing it, so I thought maybe it might have something to do with the power supply so I switched it back to the 150w one. The lag and noise still continues to happen I don't know what to do at thi... Read more

Answer:Upgraded new PC, mouse lag and grinding noise

7 more replies
Relevance 64.37%

Hello,

Ok, I'm not sure if I came to the right place for this problem but I'm looking for as much help as I can.

This has been happening for awhile now but everyday when I first startup the computer it makes this grinding noise that lasts for about two minutes then it goes away and is fine for the rest of the day when I use it. At first I thought it was dust so I took it out and cleaned it up a bit with a can of compressed air. After trying that, the noise is still there. I don't think it's my hard drive since I use a SSD. I haven't gotten a chance to open the case and carefully listen where the noise is coming from but one thing I do know is when the noise is happening and I thump the case with my hand a few times it seems like one of the fans inside makes this lower power noise thing and then you can hear it slowly coming back up to normal speed. Keep in mind this only happens if I thump or hit the case with my hand. I'm planning on opening the case soon and see what is causing the noise but I'd like an idea if you guys know if what could be causing the noise so I know what to pay attention to. And what can I use so I can hear better where the noise is coming from?
 

Answer:PC making grinding noise on startup, need help!

use a straw to your hear and move it around the components to try and isolate the cause

probably a fan

the last thing you want to do is thump the case with your hand if want the computer to keep running
 

2 more replies
Relevance 64.37%

Upon startup the rear fan makes a grinding noise. This eventually settles out. This concerns me as no grinding noise should occur, especially right out of the carton.

More replies
Relevance 64.37%

Hello
I just installed on windows 2000 on a Gateway Solo 9300 laptop
20GB HD
128 RAM

I deleted windows 98, reformatted, and installed Windows 2000 and Office 2000
I applied all the latest patches for IE, W2K, and Office
After testing here at my home I had no probs
Something happened from putting it in a laptop bag o delivering it to my friend

When she powers it up there is a grinding noise....I can hear it over the phone
and
I can also hear the harddrive seeking...clicking sound...which I never heard the whole time I had it
The sound comes from the side with the CDROM and FLoppy....It might be the floppy initializing on startup?????
 

Answer:Grinding noise on gateway laptop

11 more replies
Relevance 64.37%

HI, i just recently got a COMPAQ Presario CQ56 Laptop this past christmas brand new, i use this laptop quite frequently on my lap when laying in bed. one night i was watching youtube videos, when all of a sudden i heard this god awful grinding noise coming from under my laptop right by the fan. i stuck my ear right next to the fan and thats where the sound seemed to be coming from. if i turn it off and let it set over night, and then turn it on in the morning, there's no noise. but only when i use this laptop for like 1-2 hours does the noise come back. somebody please help me cause this noise sounds bad, and i just got this laptop not even 3 months ago. thank you!
 

Answer:Somebody please help! laptop making grinding noise!!

7 more replies
Relevance 64.37%

Hi,
Recently a grinding noise can be heard when I turn on my PC, but not always. So far it has happened twice, the first time I looked inside my PC but found nothing, and the second time it stop after about 5 minutes once the computer had been turned on. I have literally no idea what it is as nothing is touch any of the fans and both HDD's in my build feel fine when I rest my hand on them.
I've made a video of the noise, for which the link is below. You may have to turn your volume up slightly to hear it, but it is much louder in reality.
YouTube Video
Any help will be appreciated,
Tom

Answer:PC makes grinding noise when turning on

The CPU cooler is most likely loose because I've had a similar issue where when the CPU fan spins fast, it makes a similar noise.

6 more replies
Relevance 64.37%

Recently when holding the laptop in a certain way a grinding noise ensues from the device followed by a pulse like grinding. Hibernating the laptop and then reopening solves this until pressure is applied to an unspecified part of it after which the noise returns.

More replies
Relevance 64.37%

I recently bought a new PC. A Dell Ispiron 560 (3.2 ghz, 4gb memory, etc.). I don't want to get big into gaming on it I just wanted a better video card than the crappy one that came with it, so I bought a HIS HD 4670 IceQ 1gb ($60). Because of that I had to upgrade the PSU from a stock 150w to a OCZ Fata1ity 550w power supply. I uninstalled the previous video drivers by going into Device Manager and deleting them. I also used Driver Cleaner Pro. Then I installed and updated the driver for the HIS 4670. Now my computer seems to have minor mouse lag and the cursor plays catch up to where I want it to go. Also while playing some minor games (ex. A.V.A.,Genesis AD, TheHunter, Vindictus) it lags horribly and makes a grinding sound which comes through the speakers, it does this not only in a game but I can be surfing the web and listing to itunes and it will just spazz out making the grinding sound. Any help? Did I screw something up?

I tried looking around on Google, but there were no resovled issues. Some were saying it could be a bad PSU or that there is a conflict with Micrsoft High Definition Audio Dirver.

Added:
I am getting really frustrated with this, I'm 99% sure it is through the speakers. I took out the HIS 4670 and went with the stock video card and it was still doing it, so I thought maybe it might have something to do with the power supply so I switched it back to the 150w one. The lag and noise still continues to happen I don't know what to do at thi... Read more

Answer:Upgraded new PC, mouse lag and grinding noise

No help?

No one wants to help me. Did I post this in the wrong section or did I come off rude or something?
 

5 more replies
Relevance 63.96%

Hi all,I have an r61 laptop, type 8933-A38.I got the fan and cooling sink changed in september last  year, after i got a 'fan error'.Since last week the fan makes a grinding noise. However, when I move the laptop around while it's running, the fan noise tends to slow down a bit, and then increase again. I feel there might be something wrong with the rotation of the fan, or maybe lubrication.I sometimes also play GTR2 on my laptop, and just after stopping the game, I checked the CPU temperature to be 82 C. I don't know if it is normal because the cpu was under heavy load during the game. In normal loads, the temperature slowly goes back to 45-47 degrees, but the noise persists. Sometimes the fan becomes silent, but mostly its noisy. Any suggestions? I'm hoping the fan is not gone completely, because it just got replaced last year, it should atleast last another year.

Answer:thinkpad r61 fan grinding noise cpu running from 45-80 degrees

the fan's spindle is probably running out of lubrication or there are foreign particles in the mechanical parts of the fan. You can try to take apart the fan motor, clean it and then reapply some WD-40 and then followed by high quality sewing machine oils.

1 more replies
Relevance 63.96%

I purchased an Envy 34 inch Curved all in one directly from HP.  Immediately upon starting bootup, I heard the hard-drive making noises like it was constantly reading/writing.  I called tech support and they said that didn't sound right and I should exchange the computer.   I called HP direct sales and they sent me another brand new model.  The exact same thing is happening on this one.  Is it a bad batch of hard drives that HP has in this batch of new computers HP direct is shipping, or is this something going on that  needs to be turned off (indexing, etc)?Thanks.

More replies
Relevance 63.96%

My brand new T500 Hard Drive makes off and on very faint grinding noise. The grinding happens for 6 times and then goes away for 5-10 seconds and then happens again and so on. Is this normal or is my new hard drive defective, and should I ask Lenovo for a replacement hard drive?  I ran the lenovo hard drive diagnostic tool and it did not find any issues.

Answer:New T500 Grinding Noise from Hard Drive

it would be good to make a recording, but the frequency of the noises suggest your drive head is constantly parking itself... 

7 more replies
Relevance 63.96%

after a power problem, the laptops dvd drive and mains plug broke down, and a grinding sound could then always be heard from the system. after replacing the hard drive in a test, I can now safely say that its not a grinding hard drive at all. the harsh noise seems to be from the systems cpu fan. usually after a few mins of use the noise gets lower (almost disappears), as the temperature of the system increases. I have blown out all of the dust, but the noise remains. whats my other option? would a fan replacement or oiling really solve the issue? I dont have a small enough screwdriver here to remove the fan, and wouldnt be too sure on what to use if an 'oiling' was necessary-no doubt a replacement would be the best bet? surely its not the cpu itself creaking away-lol. thanks for any suggestions if possible. is a grinding/loud fan over a few yrs of use a common problem in laptops? this system is from 2007

Answer:grinding noise from laptop was not a hard drive!

Try taskmanager at start up and see what is using up the CPU.If nothing running system idle process should be showing about 96% that is normal.

8 more replies
Relevance 63.96%

Hi all,

I just recently built a new PC (back in December) and today it made a weird loud grinding/spinning noise. I immediately powered it down, and now it is running OK. There was no burning smell or anything like that. I'm concerned though. It has never done this before, and I'm not sure what component caused it. It kind of sounded like the DVD rom drive, but there was nothing in the drive. The DVD drive does make weird noises when a disc is put in or when it's reading, but I don't know why it would have this time before no disc was inserted. The case (coolmaster centurion) does have two fans built in, one in the front and one in the back. But they are usually quiet.

Specs are:

Mobo: MSI P67A-G43 (B3) P67 ATX LGA1155

CPU: Intel Core i5 2400 Quad Core Processor LGA1155 3.1GHZ Sandy Bridge 6MB

RAM: G.SKILL F3-12800CL9D-4GBRL Ripjaws PC3-12800 4GB 2X2GB DDR3-1600

Video card: Radeon HD 6950 2GB

HD: Seagate Barracuda 500GB SATA3

PSU: OCZ ModXStream Pro 600W

Please help.
thanks

EDIT: Actually, IIRC I have heard this sound before under a previous configuration. Could it be one of the case fans? I'm surprised because of how loud it was.
 

Answer:Computer making fast grinding noise

Check Event Viewer for any errors.
 

3 more replies
Relevance 63.96%

So recently my laptop seems to be making a low grinding noise, more like the old grinding noise computers use to make when they we loading back in the day, but the thing is it only happens when I scroll up or down on any program, be it chrome, word you name it. It isn't always consistent, sometimes it will be constant as I scroll, or only in short bursts and strange enough, for one instance I was over at ESPN and wasn't even moving the page, but there was a element that kept swiping from one article headline to another and my laptop with grind for the 1 second it took to slide headlines.

There hasn't been any performance issues or negative effects as far as I can tell, but I thought I'd ask around as see if it's perhaps a perquisite to an upcoming one. Anyone experience anything similar?

Answer:Laptop making low grinding noise while scrolling

Sounds like coil whine does it happen if you bring up nothing but a black screen on the browser and move your mouse around over it quickly? How old is the laptop?

EDIT: sorry if its grinding might be hard drive not power related at all. Though you have an SSD correct?

6 more replies
Relevance 63.96%

My power supply has been making some kind of grinding noise. I thought it might have been one of my HDDs, but that proved false. The noise comes about for no apparent reason. When it does happen though, I just hit the back of my comp and it goes away. Any info is appreciated.

Answer:power supply makes grinding noise

eheh, that's not very smart, damaged PSUs have been know to literally explode,flames and all, if i were you, i would trash and spend $50 for a decent PSU off of www.newegg.com and hope it doesn't fry ur system before you do so

2 more replies
Relevance 63.96%

Hello, I just bought a Lenovo Y580 with 3 yrs accidental protection. There is a horrible whiny high pitch noise on the upper right corner. Occassionally, there is also a grinding noise. Is anyone else having this problem? Also I register the laptop on lenovo and my warrantly status is only saying 1 yrs instead of the 3 yrs that I bought. 

Answer:Lenovo Y580 fan - whiny grinding noise

You cpu cooling fan is at the top left, not the top right according to the service manual, do you have a second fan for a dedicated gpu or the dvd-rom is on the right side of the notebook? http://download.lenovo.com/consumer/mobiles_pub/ideapad_y480_y580_hmm_1st_edition_mar_2012_english.p... John.





Win7 Lenovo Ideapad Z580 i5-3210m HD4000 Win7 x64 8gb 1600MHz Samsung 830 256GB SSD

5 more replies
Relevance 63.96%

Hello, I was wondering if anyone else had experience with an issue I am having.  I just got my new Y510p laptop and a fan has been making a constant buzzing noise.  It sounds like the fan is loose in the housing or ill-fitting and grinding aginst its housing.  I have a y510p with 2 x NVIDIA GeForce GT 750m graphics cards in SLI configuration, with 8gb ram.  The noise is coming from the fan on the left hand side of the computer.  The fan (and noise) starts as soon as the laptop is powered on.  From experience with previous laptops, I believe the CPU is located on the left side and this is a problem with the CPU fan. I consider this a serious issue, and will be returning the laptop in a few days if the problem presists.  I hope that the fan may "break itself in" over the course of time and the issue resolve itself. Best Regards,Erik

Answer:Lenovo y510p Fan noise : grinding / buzzing

I have recently brought 12 Pcs of IdeaPad Y510p to sold out in Nepal. One of my customer told me he is ireeted while working at night in Peace place due to the Buzz sound which produce in Laptop. After this i checked in my rest of the Laptop and hear the same problems, what is the problem, is this Factory Dafult or some thing.
 
Moderator Note; subject edited; threads merged





Kumar GurungIT SupportMEGAtechFor Complet Tech Solution3rd Floor, Kings Way TowerKings Way, Ghantaghar, KathmanduPh.: 01-4233900, 4233466,4233501Fax :- 01-4233745Contact :- 9841829751

2 more replies
Relevance 63.96%

So i was using my Compaq Evo N620c laptop( Windows XP) and i put it on stand by. When i came back, i started the laptop up and it started making a really loud high pitched noise almost like a whistle. I restarted the laptop and it started making the same noise. I went on safe mode and the noise stopped and everything louded perfectly. Than when i went back on my regular account and it started making the noise again. The noise only starts at the blue loading screen for XP. I had this laptop for 2 years and this is the first time this ever happened.

Will the noise stop if I open up my laptop and use a duster ( high pressure air) and i take out all the dust out of my fan and hard drive?

Thank You
 

Answer:Laptop makes a really loud grinding noise

No way to tell for sure what the noise is coming from with the info provided. Could be a fan, could be a hard drive. I suggest you go ahead and try blowing the dust out with canned air through the cooling vents. Use short bursts instead of a continuous blast. First blow air into the exhaust port first, then into the intake port. Repeat until no more dust appears.

Try one thing first... mute the sound. Audio hardware can do some strange stuff.

Raybro
 

2 more replies
Relevance 63.96%

Hi, Notebook details:X220 TabletBought online over U.S ebay on 23/12/2011. I started using on 27/12/2011. It has 3-year depot warranty.Product: 42962YU I encountered a problem a couple of days ago. The hard disk made grinding noises after the notebook was turned off. It now happens every time i turn off the notebook. I am a new Lenovo user/customer. Please provide guidance. 

Answer:hard disk failure (grinding noise)

Welcome to the forum!
 
You'll have to call the local support number, and they'll ship a replacement hard drive. The defective one will have to be returned to them in most cases.
 
Good luck.

4 more replies
Relevance 63.96%

I have got fan error once around 1 month back and after trying to restart for 5 to 6 time it booted up fine. The noise started to come up intermittently if I use the laptop for long time. I got the thinkpad cleaned up as mine is 5 years old and I have used it very rough and long times. Its a beautiful laptop without any problem I should say. I got the thinkpad cleaned up on this weekend from a local technician, and I was scared to see the dust inside the laptop when he had opened it up.  But he has cleaned it nicely and no noise at his place and when I got home it started again. This time its continous noise no matter if I use it long time or not, but before it used to come after using for some time. But now its starting immedialy when we switch it on no matter if its on battery or power. Can anyone suggest me what part I have to replace and if I can do it myself, as I have searched onine and could see 2 different parts for it one is the black fan and the other is the total copper heatsink unit. SO is it like the black fan is inside the heatsink which is making the noise or I should change the whole heat sink. Please suggest me some ideas. I dont have warranty. Thanks,

Answer:Thinkpad - T61 grinding noise from the top left corner

Sounds like you need a new fan. You can replace just the fan itself, or the heatsink/fan assembly. Replacing either will require reapplying thermal paste to the heatsink.  It's not a difficult procedure to do, but neither is cleaning out the dust, so if you needed a tech to do the cleaning for you, then you should probably return to him/her for the fan replacement. You can buy the fan motor very cheap, but they are installed in the heatsink with foil tape, so it's a delicate job to peel back the tape so you can remove the fan and some adhesive and/or sealer may be needed to reseal the tape after the new fan is installed. If you want to replace the whole assembly, then you'll need to make sure you get the correct one for your laptop size and graphic options, there are several different units for the T61 series.  





ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 8gb ram.

9 more replies
Relevance 63.96%

My fan produces a grinding noise at first startup only once a day.what can be the problem?? Is there any issue with my fan or something else??My notebook product is hp15ac120tx

More replies
Relevance 63.96%

I have a four year old HP Pavilion with windows XP. Three years ago, the CD drive needed to be replaced so we bought a used one for $10. It worked fine until today. I ejected the tray and it only came out halfway and made a grinding noise. I inserted and ejected it a couple more times and it did the same thing. Then, it finally wouldn't open at all. Now when I try to eject it, the light flashes and it makes the same grinding noise but it doesn't open.

I tried to eject it from My Computer and it did the same thing. I take classes on the computer and use CD's for class so I need my CD drive. Is there any way I can fix it? I'm a student on a small income and I don't know when I could afford another one. If there's something I could do to get it working again, that would be great. I'll try to answer all your questions.

Thanks for your help.
 

Answer:CD Drive will not open, makes grinding noise

7 more replies
Relevance 63.96%

Anyway,

My heat sink makes a grinding noise in the morning? After I hit the side of the case it quiets down and returns to it's normal sound? (Low blowing, but still keeping my CPU temp low).

Also, at random times it makes a whirling noise then goes?

I have opened my case in the past, and cleaned out the heat sink with a brush and it still doesn't make a real difference.

This is odd?

My CPU/ZIF is a E6600 Intel @ 2.4Ghz processor.

~Sam
Secondly, the heatsink is a 775 intel default.
 

Answer:Heat sink making a Grinding noise?

I would change it before it goes out
 

2 more replies
Relevance 63.14%

Hello, My Y500's ultrabay removable graphics started to make some weird noises. I think it may be the fan making some kind of grinding noise. I need some assistance with a replacement or a fix. Can someone lead me in the right direction for some help with my issue? Thanks.













Solved!

Go to Solution.

Answer:Ideapad Y500 ultrabay graphics grinding noise

hi SuperSup3r,
 
Welcome to Lenovo Community Forums!
 
Can you share if the removable graphics came in preload with your system, or you ordered it separatly,
If not can you share where you got it from,
 
To further isolate the issue try removing the 2nd Graphics and try turning on the computer and see if the sound will disappear.
 
I strongly suggest you canotact Lenovo Support as part of your warrant y
 
Support Phone List
 
 
Best Regards
Solid Cruver





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 63.14%

Hello ,
For about a year now my computer makes a load grinding noise
on cold boots.Not just that, the temperature in the room effects
the duration of the problem.
The noise stops when Windows is up (or backwards).
The computer is running perfectly well and boot time is quite normal ,the
OS doesn't crash and I never experienced a BSOD on this PC.
The computer isn't old (1.5 years) and is running Windows 7.
I have no idea where the noise come from and what it means.

Answer:[Desktop] Load grinding noise on cold boot

Well, it could be your CD drive, some those spin up and stay spun up during boot. Could also be a fan with a bad bearing, too much dust, or it's just spinning up high for a long time period for some reason. Could also be the hard drive failing.

9 more replies
Relevance 63.14%

I'll make this short and sweet since I don't know when my next BSOD will be. Last night my computer started making a random grinding sound and then blue screened. This has happened once before but hasn't happened for about a year. No hardware changes have been made since I purchased the parts for this PC and very little changes software wise.

I did a system restore last night and that looked like it made a difference but it then blue screened once again about an hour later.

I've attached the logs gathered by the tool in the sticky thread at the top of the forum.

Thanks in advance for any help you can give.

EDIT: since posting this I've done the following:
Removed Qualcomm etheros killer network suite and replaced it with a driver only version of the same software
Removed Realtek hd audio driver
Attempted to upgrade to windows 10 only to blue screen and revert to 8.1
Uninstalled my graphics driver, rebooted and reinstalled.
Panicked frequently
Run defrag tools on both hard drives, which took a very long time on my D drive.
I'm currently running chkdsk /r on both drives, which has been stuck on D: 10% for about an hour. The buzzing sound I've been hearing is also a lot louder during the check, could my HDD be dying?

Answer:Random BSODs and sudden grinding noise from my computer

Hi RoastMaster,

Welcome to the 8forums

I would suggest to update the BIOS to the newest version to see if that makes a difference.
https://www.msi.com/Motherboard/supp...html#down-bios

Please cleanup your C: partition (move files to the D: partition is an option), you need a few dozen GB free on your C: partition for a few reasons.
1. The dumps created in the BSOD process may not be saved properly, because there is not enough free space.
2. If you want to upgrade you need 25-30GB free space at least, after the upgrade 20GB is used for a folder called Windows.Old which contains system files from the previous installation. There is also a few GB used for the installation files & logs what makes that you at least need 25GB free space to perform the upgrade. If you increase the free space to 25GB you would get problems after the upgrade is done for the reason that Windows needs a certain amount of free space to perform several tasks in the background so the user won't be bothered with it, the recommended amount of free space is 15% the size of the hard drive on each partition. Each partition so that each partition can be maintained.
This is why I would currently recommend a free space of at least 30GB if you're planning on upgrading.
If you're not planning on upgrading, about 20GB is more than enough free space

1 more replies
Relevance 63.14%

Just finished installing my upgrades to my computer, including a nice new H100, and it would appear my hopes for a silent PC one day have been blown out of the water, with this cooler at least. The pump unit is making a sound like...well...a loud pump really, a constant grinding/buzzing/humming noise, kinda like a failing hard drive spinning. I know for a fact they are not meant to perform this way, and I have read many topics about this, but I am a little uncertain still.

Has anyone actually encountered this problem and/or knows how to fix it? Replies I have seen involve:

-Shaking it/bending pipes/generally moving it about (perhaps moving air bubbles?)
-Lowering the voltage (apparently at 12V the pump can be prone to this)

Obviously the shaking/moving thing is a pain cause you just gotta keep doing it till it works (or doesn't), and it requires the removal of the block which requires thermal paste to be reapplied, etc, pain in the ass. The voltage thing sounds very plausible, but I'm not sure exactly how to fix it.

Can anyone give me a specific/accurate explanation of what the noise is and/or how I can (prefereably not might, but rather can) fix this?

Thanks.

Answer:H100 pump makes somewhat loud grinding noise

Update:

This site here had quite a few solutions such as those I mentioned earlier:
Corsair H100 pump noise

I have tried tapping the pipes, that only made it a bit louder, and I've cycled through the pump settings but that has done nothing. I don't want to remove the block because I'm in debt and I have no thermal paste I can use if I need to replace what is on there already which is probably a good idea. I have no molex to molex adapter I can use to make a makeshift voltage adapter either. Bit of a predicament :P

5 more replies
Relevance 63.14%

Hi, the fan in my T470s started making grinding noises when it starts spinning. There are no noise while spinning constantly or spinning down. I made a video, the noise starts between second one and two. Please excuse the static noise, they come from the mic: https://www.youtube.com/watch?v=MhBZWOzSBDw I am definitely calling the support hotline. I have a tech coming on wednesday anyway so I'm trying to fit this in the same appointment. I was just wondering if anyone has the same noise? As often as the fan starts with the i7 7600u, this drives me nuts. Regards, Adriano

More replies
Relevance 63.14%

My desktop has been making this odd grinding noise for the past 2 weeks. Not every day but sometimes every other day.

It only happens upon cold boot , or sometimes when restarting. I never hear the grinding noise while the computer is just on or doing other tasks.

I opened it up to see if anything was loose but it doesn't seem this is the case.

Since i don't have some sort of meter tester for my PSU, is there any other way to test it to see if its dieing?

I had this computer for 3 years now, and while i had generic stock PSU last me longer than this i wouldn't at all be surprised if it fails now.

If its not the PSU unit what else could it be? my hard drives test good, and besides i assumed when hard drives started dieing they mde clicking noises rather than grinding.

The Grinding noise sounds like a car is burning tire, except in this case it sounds like something is being scraped upon turning on my pc.
 

Answer:Desktop makes grinding noise upon cold boot

Nexus_ said:





My desktop has been making this odd grinding noise for the past 2 weeks. Not every day but sometimes every other day.

It only happens upon cold boot , or sometimes when restarting. I never hear the grinding noise while the computer is just on or doing other tasks.

I opened it up to see if anything was loose but it doesn't seem this is the case.

Since i don't have some sort of meter tester for my PSU, is there any other way to test it to see if its dieing?

I had this computer for 3 years now, and while i had generic stock PSU last me longer than this i wouldn't at all be surprised if it fails now.

If its not the PSU unit what else could it be? my hard drives test good, and besides i assumed when hard drives started dieing they mde clicking noises rather than grinding.

The Grinding noise sounds like a car is burning tire, except in this case it sounds like something is being scraped upon turning on my pc.Click to expand...

It could be a worn bushing in one of the fans causing the blades to scrape against the case until it's up to speed. As far as hard drives, I used to maintain a Macintosh lab and whenever the hard drives were being accessed there was a scraping noise from all 10 of the Mac SEs, especially on startup but none of the hard drives showed any signs of failure in the two years I maintained that lab. If the scraping noise was from your hard drive now though, you wouldn't be able to boot up.... Read more

2 more replies
Relevance 63.14%

december 2016, at the middle of december, i purchased a new acer e5-475g the kaby lake version, after using it for some couple days, the fan making some kind of grinding sound so i'm turning off my laptop then booting it up again, it gone. after several weeks of usage(almost 1 month approximately) it started making the same noise, but sometimes the sound of it is loud, sometimes not. it usually happened after i left my laptop on cold room at the table overnight, but that sound doesnt show up everyday, only several times. i don't know what's going on with my laptop, many people say it could cause/caused by overheat, but i don't think mine caused any of that or by any of that, because i usually use a cooling pad, which is cooler master notepal x3. i already checked some things such as checking the temperature, i also tried to feel the airflow, but i couldn't really feel the airflow, because almost the whole part is occupied by the copper heatsink, i tried to push the body at fan part a bit, and the fan noise louder if i do that, but after waiting several minutes usually the sound gone. can anyone please help me? or share your experience if this problem have ever occur to you? thanks acer E5-475G-53IQspec:-i5-7200u 2.5ghz turbo to 3.1ghz-4gb 2133mhz ddr4 ram-nvidia geforce 940mx-1tb toshiba hard drive

Answer:acer E14 E5-475G fan make weird grinding noise

Sounds like in your description that the fan rubbing chassis. To keep cost down they used plastic which flexes a bit too much for my liking but normally functional. I'd open it up and check the fan for alignment and screws snug.  Easy to do really.  Remove bottom screws, slide out DVD tray, 3 tiny screws under that. Remove ram cover, unplug speaker wire (near edge white connector) then start with video port side work bottom loose (snap locks so small flat screw driver to loosen) toward the DVD side.  Once bottom off you see everything including fan.  Examine close, remove and reseat it.  This whole procedure everyone basically needs to handle or have someone that can. Maintenance- depending on use and environment you need to blow out the dust (canned air) and redo thermal paste on CPU/GPU and lube fan.  The fan brushless but does require upkeep now and then but this soon sounds like blades rubbing chassis. If you suspect fan itself pull sticker and under can access center spin bearing/bushing and few drops of lite oil (3in1/sewing machine oil) to free it up. Let us know how it goes. 

2 more replies
Relevance 62.73%

Hi all, I'm based in Portugal and I've bought my Yoga 910 back in March. Despite all the well known problems with fan noise I've been able to stand it however during the last weeks my yoga has been developing a terrible grinding noise from one of the fans. The issue seems to be mechanical, as if the fan on the right of the keyboard is hitting the back part of some of the keys ("enter", "backspace" and surrounding keys) or eventually hitting some part of the metal casing. By pressing some parts of the casing it seems to decrease the noise but it always comes back. I've found a video on youtube that shows what is happening (https://www.youtube.com/watch?v=r22k4RT87pw) however in my case the problem only comes from one of the fans. If the common fan noise can be already disturbing this one is even more annoying. Would like to know if anyone had a similar issue and the best solution to have this sorted out. Thanks!  

More replies
Relevance 62.32%

Hello,

My CD drive is making loud noises. This doesn't occur all the time. For example,I'm watching a DVD - Criminal Minds Season 4 and it allowed me to watch the episodes fine but when I tried to watch a deleted scene, it made this loud grinding noise and it wouldn't stop even when I clicked stopped in Windows Media Player. It only stopped when I removed the DVD.

This also occurred when I was watching another DVD, I was trying to skip through it and it made that loud grinding noise again but it still played after it got to where I wanted it to be. But with the Criminal Minds DVD, it won't work even when I leave the DVD grinding to see if it'll go to the deleted scene.

I don't understand what's going on. I barely used it before but now it's acting up. I never dropped my laptop or hit it.

I'm attaching the sound it makes. I hope there's a way I can fix this on my own.

Btw, the deleted scene worked on my sister's Toshiba laptop. It made no loud noises. It was smooth.

Edit: Here is the sound it makes. https://onedrive.live.com/redir?resi...int=file%2cm4a It's the one named DVD drive

Answer:Asus Laptop CD Drive Makes Loud Grinding Noise

A DVD drive will make noise. Whirring and a little bit of clunking and ticking are normal, but a solid grinding sound does not sound good. You may have to replace that DVD drive.

4 more replies
Relevance 62.32%

I recently bought an HP Omen 2 months ago. For the last month it has made a glitchy noise that can also sound like grinding. It espicially happens when I watch videos of any kind, or if I am just on the web. Strangely, it stops making the noise when I play a video game such as overwatch. I know for a fact that it is a hardware problem as I have performed tests. It has something to do with the power or the fan. It changes loudness when i change the power settings. Is this Normal? I would appreciate if I got an answer ASAP. Thank you in advance!

More replies
Relevance 62.32%

I looked for the "accept" button on the solution to my question.  It's not there.  It looks to me like part of the lower screen is missing.  The top part of the "kudos" button is just barely visible.

Answer:HP Officejet Pro 8600 making a grinding-clicking noise befor...

Hello wwob,

 

Were you able to get the issue resolved? If not, I recommend clicking on the link below and follow the troubleshooting steps to try and resolve the issue:

 

http://goo.gl/pblW2x

 

Let me know if you have any questions.

 

Thank you




I worked on behalf of HP.

2 more replies
Relevance 61.91%

I?m currently experiencing issues with inconsistent digitizer pen pressure/sensitivity.When painting within CS6, the strokes will suddenly and randomly grow thick and bold, despite brush settings for opposite results, and without a change in the pressure I apply to the screen. I am running CS6 on a Lenovo ThinkPad S1 Yoga, with a Windows 10 64-bit OS.Is this an issue with my Lenovo, Photoshop, Windows 10, the pen, or something else?What steps can I take to resolve this matter once and for all?

Answer:pen pressure w/ lenovo thinkpad s1 yoga

Hi
 
Maybe you can try updating some of the driver related to the Pen.
 
There is the Wintab Driver for Windows 10. Check if you need to update it.
http://support.lenovo.com/us/en/downloads/ds041384
 
Other thing that also may help is doing some "trial and error" with other pen related software, link using Inkscape and configuring it with the pen just to try it out.
 
Regards

2 more replies
Relevance 61.91%

On the Yoga X1, can you vary either the thickness or darkness of the lines drawn in a program like Photoshop by varying the pressure exerted? If so, where is the setting that turns it on? Thanks.

More replies
Relevance 61.91%

I don't know if anyone else has this issue but i notice that if put any sort of pressue on the left border of the keyboard that my computer will act like the tab key is stuck.  At first i thought it was a driver update issue but then realized that it always would have after i disconnected the computer from the charger and carried it to the other room.  Usually the top is flipped open so I'll be carrying it with the left hand gripping the rubber border.  I'm in no way bending the system board but it does appear handling the left side will trigger a stuck tab key.  Please help.  Maybe it needs to be looked at since it's still under warranty?













Solved!

Go to Solution.

Answer:Yoga Pro 3 sensitive to the pressure of being held

Welcome to the Lenovo Community !
 
The best way to carry a laptop is with two hands so the weight of the laptop is evenly distributed.  One handed carries allow the laptop to flex when it is being moved which is not good for the internal components. Through the years I have fixed several different laptop brands where the continuous one handed carry caused an unbootable machine. 
 
In your situation there really isn't anything to be looked at by Lenovo Support at this point since it is an intermittent problem.  Your one hand hold and grip is either causing a flex or it is putting added pressure on components.

1 more replies
Relevance 61.91%

I put all the machines in the in the topic because they are all have similar platforms. The fan on my M90z makes an intermittent grinding noise for 10-20 mintues  most often when my machine is booted or comes out of hibernation.  It sounds like it is not connected correctly.  It is actually pretty quiet when it does not make the noise. I really don't want to take send it back for a warrantly repair. Is there a risk of a complete failure in the future?  If there is a will send it back.   When the warranty ends, I could open it up myself. Does anyone else have this problem on their M90z , M71z, M70z, A71z, or A70z?





______________________________________________________________Machine Type: M90z AIO ; Product: 3091CTO (Custom), CPU: i5-650, Video Card: Intel(R) HD Graphics, Memory: 4.00 GB,Network Card: Intel(R) WiFi Link 1000 BGN, OS: Windows 7 Professional 64-bit

Answer:M90z: Fan making a grinding noise (also M71z , M70z , A71z , A70z )

I would suggest you to update the BIOS and then check if the issue gets resolved.
 
If it continues then I suggest you to take service from Lenovo as system is in warranty period.
 
Best Regards,
Tanuj

1 more replies
Relevance 61.5%

Hey, just in case someone is interested in pressure sensitivity for the Thinkpad Yoga.Try this driver from wacom ;-)http://www.wacom.eu/index4.asp?pid=9278&lang=de This morning I had a phone call with the Lenovo Support Europe regarding the subject, but all they were able was to tell me to send my brand new Yoga in. I can not tell you how disappointed I am from this support. They are hardly to understand and they know nothing!!! As an early adopter of the Thinkpad Tablet 1 this was not my first experience with them and the only reason to buy the Yoga was that there is no alternative for my kind of usage. Nevertheless I found the solution by my self and I can't tell you how happy I am. Not to be misunderstood, this is a problem of the european support I don't believe (or hope) that it is the same with the US support and especially the Lenovo Staff in this forum does a really good job!

Answer:Thinkpad Yoga - Digitizer pressure sensitivity

Hey, I have one question, I'm planning to buy thinkpad yoga from online Netherlands... and I'm not sure whether the digitizer is included or not.... its not written anything on the list about digitizer while customizing the product.... do you know from where I can buy the correct wacom digitizer which can also fit in the holder of the thinkpad yoga...??? Thankss

3 more replies
Relevance 61.5%

Works on almost every other program (Sketchable, Manga Studio EX, Leonardo, Sketchbook Pro) very odd that it doesnt work for PS and Painter

More replies
Relevance 61.5%

Hey guys, I'm having some issues with pressure sensitivity. Does the Lenovo yoga 3 support pressure sensitivity? (I thought it would, being a touchscreen laptop)I am using Adobe Illustrator CC with a stylus - the Adonit Jot Pro. I can't seem to use the pressure sensitivity functions on illustrator. I tried downloading a few Wacom drivers, however they did not make any difference. If the Yoga 3 Pro does actually have pressure sensitivity functions, how do I enable them or which drivers do I download.. basically, how do i fix this??Thanks!











Solved!
Go to Solution.

Answer:Lenovo Yoga 3 Pro - Pressure Sensitivity - Stylus

Good day and welcome to the community.
 
The Yoga 3 Pro has a multipoint capacitive touch screen (vs an active digitizer).
 
If you need Wacom-style functionality (pressure levels, fine-point control, etc) you'll need a suitably equipped machine, such as a number of ThinkPad Yoga models, the ThinkPad Helix, or the ThinkPad Tablet 10.
 
Hope this helps to clarify.
Regards.

8 more replies
Relevance 61.5%

Hi! I'm having problems with uneven pen pressure in Photoshop. When draw a few lines very sensitive some of them get's thick like it was drawn with full pressure when it actually wasn't. I installed http://www.wacom.eu/index4.asp?pid=9278&lang=en but still having the same problem Is there any fix to this? Is this problem related to the device, to Wacom or Windows 7?

More replies
Relevance 61.09%

Having an odd problem with a 2-week old Yoga 13 from BestBuy: here is the issue: When the power is plugged into the machine the display turns off (black screen). the device is still turned on and running. If you then unplug the power adapter the display will turn back on. I called Lenovo tech support but that was a total waste of time - they did a screen sharing session and started looking at the display settings then gave up and told me to return it to best buy. thanks if anyone has other ideas on what's going on with the device

Answer:Yoga 13 Display turns Off when power applied

Hi there, I am having the same problem. Did you figure out what was going on and how to fix the problem?? Please do let me  know. Thank you.

9 more replies
Relevance 60.68%

Hi everyone, i changed lenovo yoga to thinkpad yoga, just for srylus purposeaccidentally i bought thinkpad yoga non wacom model ( misunderstanding between me and seller)actually ordered wacom model but received non wacom model. can i use any pressure sensitivity pen for this model?i really need suggestions on this i already tried with note 3 stylus.  Thank you

Answer:Pressure sensitive pen for thinkpad yoga - non wacom model

actually i want it because , i can hover over anything so i can touch easily with it. 

1 more replies
Relevance 60.68%

My brand new Thinkpad Yoga doesnt register pressure from pen input. I've tried installing drivers and hunting around the settings but nothing is working. My Thinkpad did come with a stylus and stylus support and it is registering a curser when the pen is above the screen but pressure on the screen with the pen doesnt work. Thanks for your help.

Answer:Thinkpad Yoga pen/stylus doesnt respond to pressure

Which program are you using to test the pressure sensitivity? I know that there's a specific Wacom driver you have to install, "Wacom Pen" See this topic: https://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Thinkpad-Yoga-Digitizer-pressure-sensitivity/td-...

1 more replies
Relevance 60.68%

I bought the Yoga 11e (that doesnt come with a stylus) because I wanted to draw on it but when I used my stylus on Autodesk, Manga Studio, and Sai, there was no pressure sensitivity. Apparently I need a Wacom Feel Driver but on setup it said "a supported tablet was not found on the system". I'm losing my calm here, the thing I want to function the most is the only thing not working at all. Please somebody tell me what to do for pressure sentivity screen.

More replies
Relevance 60.68%

This is the third time that it is happening. The keyboard works fine before taking off, then when the airplane goes to a certain height several keys stopped working. After landing it starts to functioning again. Definitely related to air pressure, which is pretty funny and annoying ... I mean, I don't think I am being picky given that every one else on the air plane is playing with their laptops...

More replies
Relevance 60.68%

So this problem seemed to come out of nowhere, I have no idea why it started. Basically, when I use my internet, eg: opening link, loading video or downloading randomly my speakers make a grinding noise and until the noise stops (can be 1-10 seconds) my internet drops (the internet icon on the bottom right shows it is still connected but nothing loads until the noise stops. Even then, the noise can drop in and out like 10 times in a minute and is constantly messing up the internet.

If someone could help, it would be much appreciated, my speakers are Logitech (doubt that makes much difference as I doubt the problem is linked to them and my LAN card is some Ralink thing, nothing special.

Here is a low volume recording of the noise, turn up your speakers to hear it well.
 

Answer:Speakers make buzzing/hiss/grinding noise and internet drops until sound stops

8 more replies
Relevance 58.63%

Hello!

While working at my latop I thought of a novel idea on how to draw in Photoshop without having a pen tablet. My starting point was thinking about a way to better hold the mouse for a more accurate brush stroke. It came to me that if I somehow use it like a pen i could make sketches easily. I searched on the internet if something like this exists and I found about optic laser pens. However being impacient I started chopping one of my older laptop mice and came with the idea of attaching a crayon with paper tape to it. After a few adjustments it seemed a good ideea. However this is were it gets tricky. It's really annoying to use a button to draw a line. After a while the noise gets on your nerves. Also there's no way to control the pressure of the strokes. Having tried this I have thought maybe taping the touchpad with my left hand could do the trick. However it doesn't work that way. The touchpad driver isn't programmed to tap and hold the click until it is released. Obviously this isn't a good behaviour under normal circumstances. So I have scoured the internet looking for a solution but this is were my luck runned out. I have installed the Synaptics touchpad driver suite and I tested various settings to get the touchpad to work the way I wanted. It is clearly obvious that Synaptics can emulate pressure by measuring the contact area between the thumb and the touchpad. The harder the thumb is pressed the flatter it gets and the larger the co... Read more

More replies
Relevance 58.22%

Hi all, i am looking for a good and reasonable alternative to the included stylus of the Thinkpad Yoga (which employs a wacom digitzer). First of all i thought it might be helpful for others to include a comparison picture in terms of size: https://dl.dropboxusercontent.com/u/9963379/tp-stylus.jpg From top to bottom these are the pens of: * Thinkpad Yoga S1  * Thinkpad Android Slate Tablet (v1, 10", n-trig digitizer if I remember correctly) * Wacom Intuos 3 * Good old pencil (for actual paper... ) As you can see, the Yoga's stylus is really really tiny, it's around 11 cm long and only 6 mm thick. Also the key for the right mouse key is in a really inconvenient spot as i keep on pressing it over and over. The Thinkpad Slate Tablet's Pen is actually quite ok regarding the feel / thickness, it's around 10mm (as is the pencil). The wacom is around 15 mm thick on the thickest spot  and has without any doubts the best feeling of all the pens. However it does not work on the wacom digitizers of tablet PCs.  So far the only clues I found on this forum is a post from 2010:http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/Wacom-digitizers-and-usable-pens/m-p/23... This post is pointing towards Wacom pens that I can't find anymore... (articles starting with UG...) The only pen I found on the wacom page so far was the PL-900 "for tablet PCs"http://eu.shop.wacom.eu/accessories/pl-series/pl-900-pen?c... Read more

Answer:Pressure sensitive pen / stylus for wacom digitizers (Yoga, X-series tablet X200, X220, X61, X41...)

There's plenty of useful info here for pens: http://forum.tabletpcreview.com/microsoft/55416-tabletpc-compatible-wacom-pens-work-surface-pro.html As for a cheap pen - eBay is your best friend here. There are plenty of cheap full size Wacom pens to be found such as these ones: http://www.ebay.com.au/itm/Digitizer-Stylus-Pen-For-IBM-LENOVO-ThinkPad-X60-X61-X200-X201-W700-Table... Try finding Fujitsu Wacom pens as well - they have 2 buttons and an eraser.

8 more replies
Relevance 55.76%

Hi everyone, i just wanted to ask if this is fatal to my pc, basically sometimes not always when i startup my PC there is a buzzing sound coming for the back of my PC, the PSU i think, its only just started happening about 2 days ago, all i need to do if tap the back of my pc and its gone, and i do this if the sound occurs as soon as my pc turns on, i just wanted to know if its fatal to my pc, or if its just dust or something.
 

Answer:Noise on startup coming from the back bottom of my computer the PSU i think.

16 more replies
Relevance 55.35%

HiWhen I close the screen of my T410s there is a loud audible clunk sound from the bottom right support bracket.It seems like the screen is a little loose at the bottom right support as there is "give" or movement at that joint.Has anyone come across this before and can they advise how to get this fixed?Thanks 

Answer:T410s - screen makes clunk noise at bottom right support

more likely it is a hinge issue. Do you have warranty still?

3 more replies
Relevance 54.94%

Hi
I have a file server where ABE is enabled ,I tried to test a scenario where ACLs are applied on a folder such that only read permission is granted
for example I have shared drive mapped at say Z:
now when applied ACLs from GUI I allowed (Read Attributes,Read extended attributes,Read Permission,list folder/read data) and denied rest of all,I found something as below

Z:\>icacls abe
abe MICROHARD\t1:(OI)(CI)(DENY)(W,D,WDAC,WO,X,DC)
    MICROHARD\administrator:(OI)(CI)(F)
    MICROHARD\t1:(OI)(CI)(R)

Successfully processed 1 files; Failed processing 0 files

At this point from user microhard\t1 I was able to see folder 'ABE' and was able to list files/folder inside 'ABE'



When removed microhard\t1 from ABE folder and tried applying same ACLs from command-line

Z:\>icacls abe  /remove  microhard\t1
processed file: abe
Z:\>icacls abe  /deny microhard\t1:(OI)(CI)(W,D,WDAC,WO,X,DC)
processed file: abe
Successfully processed 1 files; Failed processing 0 files

Z:\>icacls abe  /grant microhard\t1:(OI)(CI)(R)
processed file: abe
Successfully processed 1 files; Failed processing 0 files

Z:\>icacls abe
abe MICROHARD\t1:(OI)(CI)(DENY)(W,D,WDAC,WO,X,DC)
    MICROHARD\t1:(OI)(CI)(R)
    MICROHARD\administrator:(OI)(CI)(F)

Successfully processed 1 files; Failed processing 0 files

Z:\>


Now folder  'ABE' is visible but no file/folder inside 'ABE',I checked on wind... Read more

More replies