Computer Support Forum

Flex 3-1120 HDD Cable and Bracket

Question: Flex 3-1120 HDD Cable and Bracket

I just received my new Lenovo Flex 3-1120 ( Model: 80LX001KUS). As delivered, it has 32G of eMMC. I am desirous of upgrading the machine with a Hard Drive (which I have purchased). I have discovered that due to the fact that the stock configuration does not have a hard drive that there are two parts that are needed to house and connect the hard drive. From Lenovo?s parts list those parts are:5B40J08368 HDD Bracket and5C10J08424 HDD Cable As much as I have tried I cannot find any option for purchasing these parts on-line. Please advise of options to acquire.

More replies
Relevance 100%
Preferred Solution: Flex 3-1120 HDD Cable and Bracket

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 98.81%

Is there any way to purchase an internal SATA cable (5C10J08424) for my Flex 3-1120 32GB so that I can make use of the internal drive bay?

Answer:Flex 3-1120 SATA cable

I found this:http://www.ebay.com/itm/5C10J08424-Lenovo-80LX001FUS-B-Flex-3-1120-HDD-Cable-B-Grade-A-/171951968701(Sorry if this can not be published)I would like better to buy it from Lenovo Is it possible?Where?many thanks

1 more replies
Relevance 91.02%

My flex 15 was purchased second hand without a hard drive.  Turns out they took the hard drive SATA cable and bracket as well.  I found the service manual for the Flex 15 and have found the part numbers I need.  Lenovo parts representatives cannot find the part numbers.  These parts must exist somewhere!  Does anyone know a way I could order them?

More replies
Relevance 76.26%

I just got this Lenovo and when setting up, I am pretty sure I downloaded and installed the free Windows 10 upgrade.  In my program information, I only see Windows 8.1 as being installed.  When I go to microsoft browser, it says Windows 10.  How do I find product key for Windows 10.  I tried following directions on lenovo help site but it did not help. thanks for any advice.

More replies
Relevance 76.26%

Hi, I just purchased a Flex 3-1120 with Windows 10 preinstalled via Lenovo.com. When I try to use the Lenovo OKR to restore the system back to the orginal state, it takes to the Windows 10 recovery options. Is this correct? Will the Windows 10 receovery option restore everything including the Lenovo preinstalled programs/apps? Thanks for your assistance!

Answer:Flex 3-1120 Windows 10 OKR

Iam not sure if it will restore lenovo pre installed apps but it will restore windows 10 completely......  RegardsKamal



Ask any questions or Doubts,Always ready to help.... Dont forget to click kudos if i have helped you

1 more replies
Relevance 75.44%

I have a Lenovo Flex 3 1120. When I bought it, I went for the hard drive option that had the cheapest price since all the other options were HDD of various sizes and I knew I was going to upgrade to SSD anyway. The flex 3 I have though, does not have a HDD and uses an eMMC embedded storage. When I went to install the SSD, there is an empty space for where the hard drive would sit and there is no SATA connection. There is a socket in the board that is labeled "SATA conn1" but no cable.
 
I called support and was told it is possible to use the SSD and boot from it. The cable and caddy can be purchased but she said Lenovo will not supply the part. I found the part number I think,  1109-01051, but apparently no one else sells it either. There was one on ebay, but it's gone. anyone know where I can find one?
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

Answer:Flex 3 1120.- No SATA connection!

update: the item number is actually 5C10J08424. I still had a hard time a seller with it in stock. One website wanted about $70 for it not including shipping. I finally found/bought one on encompassparts.com for about $20 including shipping. I'll update once I get to try it out.

8 more replies
Relevance 75.44%

I have a new Flex 3 it was working fine yesterday, I shut it down last night and plugged it in, it seems to have a good charge (and I have tried it plugged in as well), but this morning it will not boot up.  I hope I don't have to take this back to BB today, any ideas?













Solved!

Go to Solution.

Answer:Flex 3 -1120 wont power on

I had the same issue. it appears that a driver was installed but the system has stalled. It actually happened twice. I sent it in and they "refreshed" it and it did it again. I let the power die on it and it started back up. I don't know of a way to manually shut it down. The old way was take the battery out but its not the case here. The battery is sealed in side and I didn't want to give them a reason to void the warranty. You can charge stuff with the usb while it's unplugged, try draining the battery that way with a phone or tablet.

2 more replies
Relevance 74.62%

When I push the start button on right side of the notebook, it will begin to start up.  The 'Lenovo' screen comes on but then the screen goes black and does not start.  I try pushing the start button again but not until I push it for a third time will the windows come up on the screen.  Is this normal or is there a problem I should have fixed?  thanks

More replies
Relevance 74.62%

My battery was charging fine and then I clicked on the battery icon today to open up and the menu and it went from telling me the battery was plugged in and charging to plugged in and not charging. It was like clicking the icon turned off the charging capability. This is a brand new computer, I've only had it for a couple weeks. The battery and adapater are both okay according to OneKey Optimizer, so I can't figure out why it's not charging. Currently running Windows 10 if that helps.

Answer:Lenovo Flex 3-1120 Plugged in, not charging

Does your battery stay at about 60%?  If so, then there actually is no problem.  Lenovo Flex 3 has a feature called "Conservation Mode," which keeps the battery from charging all the way.  This will supposedly increase the lifespan of the battery, which is a good thing, since the battery isn't meant to be replaced.  If you want to charge the battery normally, just click on the battery guage on the taskbar.  You'll find the setting there.

1 more replies
Relevance 74.62%

Hello, My windows updated a few weeks ago and after the update I had a few issues with my touch pad and sound. I was able to roll back my touch pad driver and fix the problem but there has been no update to Realtek High Definition Audio Driver for several years so there was nothing to roll back to. The issue I have been having that my sound has been contstently going up leaving the sound bar on the screen (A picture is attach below if it helps). This has become very annoying since I  have not found a way to get rid of this. So far I have tried updating and deleting then reinstalling the driver but the sound bar remains. Therefore, is there any way I can fix this? Any help will be much appreciated.Thanks,SoundMax 

More replies
Relevance 74.62%

The model of notebook is a Flex 3-1120 Laptop (Lenovo) 80LXV. After downloading Windows 10 my web camera won't function. I tried using the camera application and I was notified with the alert "Something went wrong". Skype also doesnt detect a camera for video calls.
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

More replies
Relevance 74.62%

Hi, I have a Lenovo Flex 3 1120 and am having trouble playing games on it so i was wondering if i would be able to ugrade my graphics card and what card would be compatible with it. The processor is: Intel Celeron CPU N2840 2.16GHz
RAM: 4.00GB
System type: 64-bit
Graphics: Intel HD
If you need more information let me know how and where to find it becuase i need help. Thanks! 
 
Mod's Edit: Additional information added to Subject line for clarity of issue.
 

More replies
Relevance 73.8%

I recently updated to the Windwos 10 Fall Creators update (Build 1709, 16299.125), and as soon as I updated, the graphics driver failed and switched to the Microsoft Basic Display Adapter. I tried updating and rolling back the driver without success. My driver right now is at the latest version (10.18.10.4358). I already tried fixing this issue with Microsoft support but they couldn't find any solutions. Microsoft Support Link: https://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/intel-hd-graphics-not-working-... 

More replies
Relevance 63.14%

Hi,
I bought M3800 without internal HDD but I want to add additional HDD now. Can I buy HDD cable and bracket for M3800 or can I use any alternative one?
Thanks

Answer:HDD cable and bracket for M3800

Yes indeed.  I ordered the HDD bracket 21YWY and HDD Interposer Cable DG95V from Dell, bought a 61WH battery from eBay (Dell did not carry it at the time....) and a Samsung EVO 1TB SSD drive from Amazon.  It was easy to install (although you need a very small size 3 torx scree to remove the bottom cover) and works like a charm.

14 more replies
Relevance 63.14%

They made the latest generation of Nitros more upgrade-friendly by making the components easier to access. I recently bought a VN7-593G with a PCIe NVME SSD. Now I want to extend my storage by installing a 2.5" SATA SSD. So I'm gonna need a bracket and a FFC-cable, but I can't find it anywhere. I need the article number of those things so I can order them from the spare parts retailer. Can anyone help me out? As i wrote, I ONLY need the article numbers. Cheers,K













Solved!

Go to Solution.

Answer:VN7-593G 2.5" bracket and FFC cable

Hi,Deleted, I'll double check and post back. 

9 more replies
Relevance 62.32%

 https://community.acer.com/t5/E-F-and-M-Series-Laptops/Detailed-specs-for-RAM-amp-Disks-for-the-ES1-...  86.M8NN7.001SCREW M2x3.0 PH (Qty=4 - bracket/bay)86.SYZD7.001SCREW M3x3.0 PH (Qty=4 - bracket/HDD)33.GG2N7.003BRACKET.HDD50.GG2N7.004CABLE.HDD I found that link and finally I decided to upgrade and buy those items. But I searched the internet and I could not find a sales place. I wonder where I can buy the presented items.

Answer:Asipire es1-132 HDD bracket and sata cable

Hi,You can contact Acer Support centre in your region and request the details of Acer Partner retailers in your area:https://www.acer.com/ac/en/US/content/supporthttps://www.acer.com/ac/en/US/content/support

1 more replies
Relevance 61.91%

I just bought a the A515-51G-58SA and i want to install a 2.5 inch hard drive but the laptop doesnt come with a sata cable or hdd bracket. Would it be possible for me to be sent the required items so i can install a hard drive? 

Answer:HDD cable and bracket missing from A515-51G-58SA

Hi,Get in touch with Acer support, they may be able to send the parts required.https://www.acer.com/ac/en/US/content/service-contact

1 more replies
Relevance 61.09%

I have an E5530 that shipped with an M.2 SATA drive.  I replaced it with a larger model, but i would also like to add a 2.5" SSD to it.

Because mine shipped with an M.2 drive, it doesn't have a bracket or what appears to be the needed cable to attach it to the motherboard.  There is a spot inside the case to put a 2.5" drive, but without the bracket and cable you can't do it.

Where/how can I buy a bracket and cable?  I can't find any part number for it.

More replies
Relevance 61.09%

Hello all,
Where would I be able to acquire the brackets that are connected to the harddrive as well as the interposer cable? Those items didn't come with my 7567 so I'll need them for my 1tb Samsung 850 EVO.
See attached pic for bracket and cable

More replies
Relevance 61.09%

I just bought a Aspire 715-71G-5186 from Sweden. It has a empty HDD bay but no sata cable or bracket.Do i need to buy these parts myself?

More replies
Relevance 56.58%

Can someone assist me in finding out which option is best?

Should I use this Amazon.com: Monoprice 107637 1 Port Internal SATA to eSATA Bracket (107637): Computers & Accessories

or something like this: PCI Express SATA III Card - PCIe SATA 6Gbps | StarTech.com

Will the latter perform as fast as the former? (Or will the former even work given the lengths of the cables I have to use?)

Also, I'm getting really confused when it comes to the maximum length of the sata to esata. The esata bracket comes with a 20 inch cable... and the esata cable that comes with my external drive is about 20 inches. That makes an even 40 inches. I know the maximum sata length is 40 inches... and I don't want this 40 inch chain causing corruption.....

What should I do?

***I also want to make sure using the pci express port isn't going to cause any issues with the graphics card... and I really want to make sure I'm using the fastest method possible

Answer:PCI Express Esata Bracket or Direct Bracket?

bump. Right now, I'm averaging 110mb-150mb a second with this bad boy Amazon.com: Mediasonic ProBox HF2-SU3S2 4 Bay 3.5" Hard Drive Enclosure - USB 3.0 & eSATA, Support SATA 3 6.0Gbps hard drive transfer rate: Electronics (WD Caviar Black).
Through using a usb 3.1 port on my mobo.

Would sata be that much better?

9 more replies
Relevance 54.12%
Question: Flex Cable

My name is xttwo.

I've recently rebuilt a laptop.

It's a Toshiba Tecra 8100. The last part I need is a ribbon flex cable that connects the motherboard with the front end of the LED display just below the keyboard.


Toshiba the company won't help me since I have an out-of-date out of warranty computer.


So far I haven't been able to find any place to get it. It seems to be the one computer part no one in the world keeps in stock.

Believe me I've looked.

Sales & Service locations where I live, other places in The United States, other places in Singapore and France.

So now I've decided to try asking people on tech forums. This is my second of what I hope won't be many more forums.

If anyone out there has the part I'm looking for; I'll be happy to pay you the $30 dollars I was originally going to give one location that presumably had it.
( via PayPal )

The part I need is called Ribbon Flex Cable.
( flexible printed circuit cable )

Appliance Wiring Material : AWM E41447-M 2896 VW-1

That's the serial/model number printed on the computer cable itself.

Answer:Flex Cable

Is this what you are looking for? e41447-m,awm e41447m,2896 wm,awm 2896 ,30pin cable,30 pin 2896m,

Far cheaper than the $30 you are offering up to people... Also, from what I can find, that model and such really gives no information as different vendors use that same number for different cables in different products. One company has a 40pin version, another has a 5 pin, another has a 20 inch long one, another has a 2 inch long one.

4 more replies
Relevance 54.12%
Question: lcd flex cable

May I get LCD flex cable for my HP 15-r033tx laptop?

More replies
Relevance 53.71%

Hi  i m DELL XPS 14 L1421X owner. I need flex cable connetor on the hardrive side of the motherboard. Which is connect modher board to sound and msata controller board with flex cable.
I was accidently broken i need new connector to replace bu i didnt find please help me about that
Thanks 

More replies
Relevance 52.89%

Does anyone know were I can get a lcd flex cable for a Pavilion zt1135. I have been searching but can not seem to come up with anything. :cry Thought maybe someone here would have a special spot to get odd parts.
Thanks in advance for your help.

 

More replies
Relevance 52.89%

Hi

I have a card reader from a Dell Dimension 5100c system​ which has a 10-pin flex bay card reader cable. I would like to change the cable to a sata one. Is this possible and if so which cable would suit?
Thanks

Halle
 

Answer:10-pin flex bay card reader cable

16 more replies
Relevance 52.89%

So, I got my new Flex 5 last week and I'm absolutely loving it, but I noticed today that my cats have already chewed through the charging cord (thankfully it wasn't plugged in at the time!). I've been looking for new ones on Amazon, but I can't find anything from Lenovo and I'm very wary of buying third-party chargers after a few incidents with my old Macbook and the cheap chargers I bought for that. Does anybody know where I can buy a replacement from Lenovo? If not, is there a brand or specific product you have purchased that works correctly with this model?

More replies
Relevance 52.48%

Hello HP support, I need to buy new cable that connects my display with motherboard. Can you please tell me s/n of that particular part? According to HP service manual it should be  "Display panel full HD cable for non-Touchscreen models (includes webcamera/ microphone module cable and screws) for HP Pavilion 15 Notebook PC computer models" with spare part no.  762544-001 .I think the s/n should be DDY14ALC140 . Is that correct? Thanks a lot, M.

More replies
Relevance 52.48%

I need to buy the Cable Flex DDORD3LCOOO ( OAV-0071) for the HP Envy M7 K111 - Product B4T7OUA
[Personal information removed]
 
Do you have an address in Atlanta city or in Miami area?
 
Thanks for your help.

More replies
Relevance 52.48%

I have a Lumia 920 and for the past 3 months the compos, Accelerometer, and proximitor stopped working al together causing my screen not to rotate, glance not working, Phone display not turning of when calling, capacitive button lights not turning on, Nokia Camera app crashing, and auto screen brightness malfunctioning. I heard that replacing the button flex cable could be the solution because the sensors like compos and accelerometer are on the flex cable. So I put my phone on the freezer for 60sec freezing only the button flex cable side and it worked for 20 hours. I then froze the other side of the phone and it still didn't work so I once again froze the side with the flex cable and it worked temporarily.
So I Would like to know if it sound like the button flex cable needs replacing. Thank you!!

Answer:Nokia Lumia 920 Flex cable Replacement?

If your compass isn't working then it's either uncalibrated or yes the flex cable isn't working. however the proximity sensor to detect the lighting isn't related to the flex cable, it's located right beside the front facing camera. Of course it would be best to just replace the flex cable for now and see how that goes.

2 more replies
Relevance 52.48%

Hello everyone,

I was replacing a floppy drive on my HP Pavillion ze5470US, and I had removed the old floppy drive flex cable from the Low Insertion Force (LIF) connector on the motherboard. At first I thought the connector removed from the board, so I tried for a while to pull the peice off. When I realized it was not coming off, I finally thought to think to remove the cable. I am not sure if I have actually damaged the connector, or if when I replaced the new drive cable in the connector, if I had not done it correctly. When I use the computer now, the floppy drive will work fine sometimes, however, most of the time it will give me errors telling me that it can't find the sectors on the disk, and it cannot format disks. I know the disks are good as I have tried them in other computers.

Anyhow, I was just wonding how one would properly go about removing and inserting floppy drive flex cables into LIF connectors? Is their a special tool, or do I just gently pull the cable out and firmly press it in?

Any help you can provide me would be much appreciated.

Thank you,

-wickid
 

More replies
Relevance 51.66%

My laptop got that notorious crack at the right side joint. So I bought a replacement part from AliExpress. Fortunately it is cheap and fits perfectly.
But a service man who replaced that part did it very bad. Sometimes my keyboard does't work. I opened the bottom cover and discovered that a flex cable was placed incorrectly and some screws were missing or screwed wrongly. Can anyone tell me what is the function of this cable? Is it 40 pin? I'm thinking of replacing it by myself because it looks creasy and afraid that it can cause more problems in the future. But right now my keyboard works well again...

More replies
Relevance 51.25%

Please help me, i broke flex cable of my productiviy jacket. please tell me to get spare part to replace flex cable fo rpoductivity jacket for elitepad 900 

More replies
Relevance 50.84%

Recently the power button on my Lenovo flex 2 14D (Win8) broke and I have had to resort to using the 'backup' power button by poking it with a paper clip. I've googled around a bit and it seems as if you'd need to replace the motherboard to repair it, something I'd prefere to avoid.  Another thing that came up was that it would be possible to change some BIOS setting to make the computer turn on, wake from sleep/hibernation etc when the AC-cable is attached. However I have not been able to find any such setting anywhere (and I'm decently confident that not only have I not found it but that there is no such setting in the BIOS version that's on this computer). I'd appreciate some pointers on where to find it. If it doesn't exist: are there any other ways to achieve the same or a similar result?Thanks in advance

More replies
Relevance 48.79%

Hi there, I am planning to purchase ideapad laptop.Initially I was interested in Z series, but came to know that there is .77ghz stuck problem. So I have diverted my search to Flex and U series (U430 and U530). I need help to decide which one is the best and should I prefer either of them to Z series. Also please let me know pros and cons of Flex and U series. I'll appreciate your help. Thanks Apoorva p.s. I am not a gamer. So Y series is out of question.













Solved!

Go to Solution.

Answer:Flex vs U series Which should I buy? (Flex 14, Flex 15 / U430, U530)

Hello, No any inputs to my query?I need help to decide what to buy. Please please let me know...

5 more replies
Relevance 46.74%
Question: Canon LBP 1120

Please help me. I have vista 64 but i can't find any driver for Canon LBP 1120. Help me because i don't want to buy another printer.

Answer:Canon LBP 1120

Hi EugeneBek,

Welcome to the forum.

Sorry, the only drivers I can find for the Canon LBP 1120 are the 32 bit ones. There are no 64 bit ones for this printer yet from what I see.

http://software.canon-europe.com/products/0000524.asp

Shawn

1 more replies
Relevance 46.33%

I have installed the LBP-1120 printer but somehow contrived to get Japanese voice messages when printing. How do I change these to English? Thanks

Answer:Canon LBP-1120 language

I don't know the printer but on the toolbar look for Options, Preferences, Tools or similar wording and see if it can be changed there.

4 more replies
Relevance 46.33%

I'm going mad trying to use this printer!
I have found only the Vista 32bit drivers.
I tried to install them (by manually select them, not with an exe application, so I can't choose the vista or xp compatibility check) to my windows 7 32bit but at the end I got an error about the spooling service that was blocked during running.
can anyone please help me? thanks!

Answer:Canon Printer LBP 1120

It is best to uninstall the old drivers and run the exe file in compatibility mode for the new driver.

Here's a link to Technet for the same problem.

Canon LBP 1120 can't install : Windows 7 Hardware Compatibility : Windows 7 Beta : Microsoft TechNet Forums

8 more replies
Relevance 46.33%

Does anyone know of anwhere other then HP's website where I can download the printer driver for the Deskjet 1120 (OS Windows 98) as I can't seem to download it from there. Have managed to download other HP printer drivers & software OK. Just getting error message when trying to D/L.

Answer:HP 1120 Printer Driver

Managed to find one on driverguide.com. The search facility wasnt much use though

1 more replies
Relevance 46.33%

Fixed: Bug fixes
 

More replies
Relevance 46.33%

Hi all,

has anyone successfully managed to get a Canon LBP-1120 working with Windows 8?

As you might know, Canon does not provide any Win-8 drivers, but only 32-bit drivers.

I've tried playing back and forth with XP/Vista/Win-7 drivers and running the in "compatibility mode" without any success.

Googling gave me several links about this issue, but nothing that solves my problem.

Please help!

Thanks in advance!
 

Answer:Canon LBP-1120 on Windows 8?

Eilenach said:





Hi all,

has anyone successfully managed to get a Canon LBP-1120 working with Windows 8?

As you might know, Canon does not provide any Win-8 drivers, but only 32-bit drivers.

I've tried playing back and forth with XP/Vista/Win-7 drivers and running the in "compatibility mode" without any success.

Googling gave me several links about this issue, but nothing that solves my problem.

Please help!

Thanks in advance!Click to expand...

According to this page, the Canon support may in fact be included with the Windows 8 OS. Follow the instructions there.
 

2 more replies
Relevance 46.33%

New PC with Vista Home Premium (32 bit) and both the Cannon LBP-1120 laser printer and the LiDE50 scanner refuse to work.Downloaded both software from Cannon and the printer is there supposedly working OK in Device Manager. Scanner says it isn't working.Print from Word gets Error - printing under Status which then disappears. Cannon say they will ring back next week as they don't know why! Any thoughts? Thanks

Answer:Canon LBP-1120 and Vista

Have you made the printer the default printer for Vista , I think that when you have word loaded the printing properties default to Microsoft Office Document Image Writer and not your installed printer . Are you using driver 7.1.3.3 for the scanner , if not click here for that version , this is from the Australian Canon site , this is where I got the drivers for my N670u which works well under Vista . Ashley

4 more replies
Relevance 45.92%

Hello, I have recently bought Lenovo Flex 2 14 laptop and Ya I am sure Lenovo nailed this Master piece (besides Brightness). Infact My QUestion: Lenovo 2 14 i7 4510U maximum RAM is 8GB , that is what Lenovo says, where as the actual Processor i.e i7 4510U has maximum capacity of 16GB . Cannot I go ahead and upgrade my RAM after the Warranty Period(may 2 yrs latter) ?? Techies, If you have information let me know , pls dont just bypass this question. Thanks 













Solved!

Go to Solution.

Answer:RAM Extension on Flex 2 14/ Flex 14 / Flex 15 Ideapads

I did that to my 3 year old z570 (max on the manual says 8 gb.... now it has $50 16 gb ram chips)..... Works flawlessly. It really depends on the ram you have.... is it soldered or is it removable. If removable, I would not wait till the warranty period is over. Do it now.  if the computer needs repair, just swap back the old ram. Ram upgrade is the easiest thing to do on a computer and there are thousands of How-to videos on it.

6 more replies
Relevance 45.92%

Hello, I have the Lenovo Flex 2 "14. I have had the laptop for not even a year now and just recently its been dying out right when I unplug it from its charger. It seems as if my battery is not able to hold the charge anymore? Does anyone else have this problem? And what can I do to fix this?

More replies
Relevance 45.92%

i got this canon lbp-1120, it was wworking fine, i did an upgrade to WinXpSp2 now the printer wont install,when i plug it in,the system detect it but i get this massage found new hardware printer installtion cannot be complated. Anybody with a solution to this problem,i 've downloaded the latest drivers and upgrade but it still wont work.
 

More replies
Relevance 45.92%

Dear All,

My printer is flashing a message No Print Cartridge.But Catridge is already there and properly
installed.

Please assist its urgent.
Rgds,
aligahk06
 

More replies
Relevance 45.92%

Dear All,

My printer is flashing a message No Print Cartridge.But Catridge is already there and properly
installed.

Please assist its urgent.
Rgds,
aligahk06
 

Answer:Top Urgent Printer HP laser jet M 1120 MFP

Please dont double post, it annoys the moderators . Is it possible to remove the cartridge and then put it back, making sure its in firmly. Ensure its in exactly the way it should be. Is there a bit of covering tape left on the cartridge?
If that fails, Canon customer services.
 

1 more replies
Relevance 45.92%

Need a driver for 600-1120 I need ACPI\HPQ4000 specifically... is this driver included in bundled drivers? Any help appreciated

Answer:Need ACPI\Hpq4000 driver for 600-1120

 Hi, ACPI\HPQ4000\4&15DD6BE&0  Original Fintek eHome Transceiver Driver ftp://ftp.hp.com/pub/softlib/software11/COL35151/pv-87085-1/sp49795.exe http://support.hp.com/us-en/drivers/selfservice/HP-TouchSmart-600-Desktop-PC-series/4079692/model/41...

2 more replies
Relevance 45.92%

I am having trouble printing to our canon printer via a usb cable on my new XP machine. The print goes to the printer then a data protection error or something like that comes up.I've tried updating the print drivers, but the machine still doesn't want to know. But when I connect my hp 959c again via the usb everything works fine. I know the obvious answer is to forget about the canon and just use the hp, but the canon is quicker and cheaper to run.

More replies
Relevance 45.92%

Hi,

I have been searching several websites, downloaded a lot of junk and tested a great many so called solutions. In spite of all efforts I could not find a working solution for the LBP-1120 on W7 x64.
Although I guess most LBP-1120 users got tired of searching and simlpy threw away their printer, I refuse to do that. So I'm running it on Virtual PC under W7 x64, a complicated afair if one has to print just a few copies. The latest thread on this (and most other forums) is of 2009, so did anything happen after that date?
Does any one know of a working (tested!)driver solution for this printer? It's a shame that Cannon did not provide a decent driver. The vista / W7 x64 does not run on x64 platforms in any mode! Even for old Epsons I was able to find W7 x64 drivers.

Kind regards,
Dave
The Netherlands

Answer:Driver for Canon LBP-1120 Lasershot on W7 x64

First, make sure you uninstall any previously installed printer drivers in add/ remove programs which may conflict with the installation.

Check Device Manager for driver issues.

Select the newest version from the list. Then click download.

Do not turn on the printer until the software is installed.

Laser Shot LBP1120

9 more replies
Relevance 45.92%

Computer sees external drive, but the drive does not receive info or data

Answer:Can you use USB 3.1 with a Pavilion Slimline Model S5-1120, ...

Hi there @JPMESQ, I hope you find your Support Forum experience a positive one! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you have a question about USB compatibility. I am happy to help with this. According to the USB 3.1 specification, which is referenced here: USB - wikipedia.org, "The USB 3.1 standard is backward compatible with USB 3.0 and USB 2.0." So in terms of the connection it should work, but the performance will be limited by the slower standard. It is possible that some devices using USB 3.1, may not themselves not be backwards compatible, but that would be a case by case issue. I hope that addresses your question, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

1 more replies
Relevance 45.92%

I just replaced the hard drive and both cooling fans. When the system is powered up the screen flashes between blue to black to gray to (red-green -blue-black horizontal lines) and repeats. I reset the bios still no change. I re checked all connections the board is getting power, i can push the eject on the DVD drive and it works, all fans come on just un able to get to bios screen. I tried powering up and hitting f10  repeatedly no change. There are no beeps what so ever on power up and while the system is on. The reason for the hard drive replacement was it just stopped working, but at the time I was able to at least get to the HP screen and troubleshoot the problem. I tried un plugging power to system holding the power button for five seconds, plugging back in still same problem. I can hit the print button on the keyboard and hear the computer beep, that is the only beeps i can get. 

More replies
Relevance 45.1%

Hey i have a Dell Inspiron 1120 with win7 home premium and out of nowhere when i restarted it it said " a disk read error occurred" and to press ctr,alt,delete to restart the computer. since that didn't work i tried to re install windows 7 and my hard drive wont show up, and even when it does in the middle of the installation a error comes up that says something about the installation files missing i don't remember word for word but it was along the lines of that then when i restart again it says " BOOTMGR Missing" sorry if i left anything out just let me know what other info you need. Thanks

Answer:Dell Inspiron 1120 Boot Problem

Go into BIOS. Does the hard drive show up there?

7 more replies
Relevance 45.1%

Upgraded to Win 10 with no problems, I found that touchscreen is available only at login screen. I can type on the screen the password to log in or swipe the login image, or press the shutdown button on the screen, below right, or change the login user on screen. But as soon as I'm in the desktop (or tablet mode, I tried it) the touchscreen is not rworking anymore. As far as I can see touchscreen works perfectly even if there aren't officially  the drivers available for my machine,  I just would like to know how the enable the touchscreen in the desktop mode following the login. Thank you. Enrico










Solved!
View Solution.

Answer:Touchscreen of Touchsmart 610-1120 works only at login

Well I found it: there is a key in the registry that enable/disable the touch screen. I just set it and now it works with no problem at all, nor the drivers have been changed.

6 more replies
Relevance 45.1%

I replaced the flex video cable of a HP g60-230us laptop but the screen now shows only a black and white large bands. When connected to an external display everything works fine. Before the replacement of the cable the screen showed a blurry grey pattern of dots and lines. Now the black and white large bands are quite sharp. It has a Win Vista Home Premium, but I cannot find the Hardware Diagnostic Tool. The HP Total Care Advisor, Troubleshooting tool does NOT show anything wrong with the screen of the laptop. How can I understand if the problem is the cable or its installation? Or if the problem is maybe in the video card or the motherboard? Any help is greatly appreciated. Thank you in advance,-fabstr64

Answer:no video after flex video cable replacement

The fact that external display is OK rules out the motherboard. If you have replaced the cable and still have a distorted image or bad image then it is the screen panel itself. 

1 more replies
Relevance 44.28%

Hi, Is it possible to upgrade the graphics card in lenovo flex 15 laptop? I understand it comes with integrated graphic chipset. Regards,Aravind S

More replies
Relevance 43.46%

I need I'm in so much trouble, I have 'bricked my mother's brand new Lenovo IdeaPad Flex 10 laptop (model: 20324) after an unsuccessful BIOS update.I'm hoping to restore the BIOS by unplugging the laptop, inserting USB with BIOS file on it, holding down fn+r and then plugging in laptop and powering on. The USB contains BIOS downloaded from Lenovo https://download.lenovo.com/consumer/mobiles/93cn59ww(v9.9&v3.8).exe I extracted 93cn59ww.fd and used Andy's Phoenix Tool (from mydigitallife website) to find bios filename but Andy's Tool doesn't show what filename I should rename it to on USB.When I power on the laptop all that happens is the white power light comes on. However,If I hold fn+r while turning the laptop on the power light turns red and continues to blink. If I plugin or unplug the power cable the laptop beeps. I'm hopefull I can get this working if I can find out the filename. I've tried naming the file bios.bin, bios.fd, bios.wph, ect but I have had no luck.The original bios was InsydeH20 93cn55ww(v9.5).64bitPlease can anybody help me find the filename I need to rename 93cn59ww.fd to on the USB? I'm in so much trouble!I'm not smart enough to figure this out on my own but I'm hoping somebody else here can help. Many thanks in advance to somebody who knows how to do it.
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

Answer:Flex 10 - BIOS recovery via USB and fn+r on bricked IdeaPad Flex 10

I've downloaded  https://download.lenovo.com/consumer/mobiles/93cn59ww(v9.9&v3.8).exe and extracted file 93cn59ww.fd from it.I just need to find out what to rename 93cn59ww.fd to on the USB? 

1 more replies
Relevance 41%

I am currently using a Lenovo Flex 3 1470 and the keyboard for it stopped working and now I can't type any numbers or activate any function keys. I have spilled tea on my laptop and got it wet in the past so I am now looking to get my keyboard replaced.  I have managed to find some Flex 2 14 inch US keyboards on eBay for less than $20 that look exactly the same as the one on my laptop, but I can't be certain unless someone confirms.  Are the 2 keyboards the same? 

More replies
Relevance 40.59%
Question: hdd bracket

Where i can find hdd bracket and screw for HP Elitebook 850 G3?

More replies
Relevance 40.59%

Hello guysI would like to ask how can I fit an SSD along with my HDD on my M92P small form factor? Do I need to purchase a new HDD caddy and an SSD bracket as well?ThanksVarnis

More replies
Relevance 40.59%
Question: P70 HDD Bracket

There is a 3 sided thin rubber bracket that is used to mount the HDD or SSD in the 2.5" bay. Any idea what the part number is?

Answer:P70 HDD Bracket

I have talked to different parties in Lenovo.  Obviously, there's no part number for that.  That rubber piece comes with Lenovo HDD only. Of course, aftermarket product will emerge soon.

1 more replies
Relevance 40.59%

P4 processor sockets have a plastic, rectangular bracket around them that the heat-sink and fan attach to. What do you call that bracket?

I need to buy some and I can't even search for it because I don't even know what to call it.
 

Answer:What's the name of this bracket?

I have one on my motherboard. But it's socket 754 but I guess it's the same thing.
In the installation book it says
"Push down the retention bracket lock on the retention mechanism to secure the heat-sink and fan to module base."
 

3 more replies
Relevance 39.77%

Made a thread here to get better results.

Heres a problem i had maybe you guys can help..

When i tried to install the new Cooler, i took off the original backplate
to replace it with the 1366 one that came with it.. then i noticed that the backplate
Held the HEATSINK and the CPU Locking system... so ill need a separate plate (the little one to hold just the locking system one) can i buy this? or something any thoughts?

this might help you understand more..



Thanks again.

Answer:CPU Bracket problem.

Rephrase yourself abit better i don't quite understand what your problem is pal.

8 more replies
Relevance 39.77%

The bracket for my harddisk is broken, and i can't find a partnumber. Who can help me?

Answer:Bracket of the HDD is broken

Hi,

please contact a Toshiba service partner. They are able to order it at Toshiba Europe and tell you the price!

At https://eu.computers.toshiba-europe.com you can find a list!

bye chris

1 more replies
Relevance 39.77%

Trying to install a CDRW as a second unit for a mate, in a PC World Advent case, the problem is that the units are mounted on these sliders that push in and clip.it looks very difficult to mount the unit without these sliders and of course PC world are no help at all,Tried the websites for Dabs, eclipse and Micro Direct without luckCheers

Answer:CD ROM Mounting Bracket, Where can I get some?

Back to the top

2 more replies
Relevance 39.77%
Question: Square bracket key

Hi I am using photoshop and there is a shotcut alt + bracket key. However pressing those keys on my keyboard doesnīt  work. I guess you have to press AltGr + bracket key to write a braket key o your screen. Does anyone know how to deal with this issue?  

More replies
Relevance 39.77%
Question: SLK900U X-bracket

I got a SLK900U with a 92mm Tornado for my Epox 8RGA+ (and earplugs). One of the holes in the X-bracket is too large to hold the standoff. I looked at it under magnification and it appears it was just made with a tap that was too large.

I was wondering if anyone else got a bad X-bracket from them.

A word of advice to anyone who does Ė RMA the unit immediately and donít mess with Thermalright. Support will tell you they canít help and pawn you off to sales. And sales will just ignore you until you get really aggressive. It has been a week and as far as Iíve gotten is a message from sales that they will not use any type of expedited shipping when they finally get around to shipping it Ė it hasnít been shipped.

They do seem to be aware of the problem but havenít set up any reasonable customer help.
 

More replies
Relevance 39.77%

I would like to add a SSD to my M73 (in addition to hd). It looks like I need to buy 04X2175 mounting bracket to mount the SSD below the optical drive. Can anybody recommend a supplier? I have tried https://lenovo.encompass.com/ but they are showing a 45 day lead time.

More replies
Relevance 39.77%

Hello all,

I am having a problem finding a heatsink fan bracket/retention bracket.
My description of this is a black plastic square that surrounds the CPU and is what the bracket's clip to hold down the Heatsink to the motherboard.
Motherboard is a Dublin, which is a micro ATX, 478 Socket, P-4 1.6ghz.

I have an emachine T4160, after speaking with the salesman at emachine they told me that I would have to purchase a new mobo for this item. $149.00 later and a few day's for delivery I got the mobo, opened it, and poof this item was not attached to the mobo. I called there tech support for this back and they said it does not ship with the mobo. Well here is the delimma, it does not ship with the heatsink fan either. Matter of fact they do not even carry this item at all. So as of now my whole pc is shot due to a $10 piece of plastic.

I don't mind spending money on a new heatsink if need be or whatever but I do need to know if this item is possible to get. The PC has been very good to me and don't want to loose it, can someone help me on locating where I may get this item because Emachine seem's like they would rather we purchase a new pc than pay $10 buck's for a piece of plastic.

Thanks for any help
Bobby
 

Answer:Heatsink fan bracket

6 more replies
Relevance 39.77%
Question: 1366 Bracket.

Do any exist for any of the Xigmatek range?

Thank you.

Answer:1366 Bracket.

the I7361 crossbow and another.....but i haven't seen them on any websites besides xigmatek. I've heard they was coming out in mid december and would be in stock in online stores in a week...guess that didn't happen

9 more replies
Relevance 39.77%
Question: Broken Bracket

My heat sink bracket broke where the fan attaches... is there any where i can buy a new one or do i neew to buy a whole new fan? It attaches to an Asus P4P800vm.
 

Answer:Broken Bracket

Buy a new heatsink and fan combo. They can range from $10 to $100. A cheap one will likely be fine because in general any aftermarket cooler will be as good or better than the stock cooler.
 

2 more replies
Relevance 39.77%

I have an Aspire E5-571-39B5 which was shipped without a dvd drive (it has a plastic fake one, to fill the space). I want to add an HDD caddy in this space, but for this I need an ODD bracket and bezel (the plastic on the side, and the other for the screw). Could someone give me the part numbers? I haven't opened the laptop yet, so can somebody confirm that there is still a SATA port for a DVD/caddy in this particular model? Thanks

Answer:Need an ODD bracket and Bezel

Hello, Your motherboard has 2xSATA 3.0 ports.Here are the part numbers:Spoiler (Highlight to read)33.ML9N2.003ODD.BRACKET42.ML9N2.001ODD.BEZEL86.ML9N2.003SCREW.M2xL2.5 (Qty=1 to fix the bracket)33.ML9N2.003ODD.BRACKET42.ML9N2.001ODD.BEZEL86.ML9N2.003SCREW.M2xL2.5 (Qty=1 to fix the bracket)I suggest you to contact your Acer customer service (see this webpage). Sorry I don't speak your language.About the HDD caddy, take a look on this website.

4 more replies
Relevance 39.77%

30 November 2005.
2326 Hrs.

FM: Rumba352

SUBJECT: I need a better bracket for securing my new heatsink.

I just received a new heatsink in the mail.

Description of new heatsink:

Thermaltake heatsink.
model: Tower112 Heatpipe cooling CL-P0024.
This is a heavy chunk of copper.

Description of motherboard:
ABIT model VI7.
CPU Intel pentiun 4.

After opening the box containing the heatsink,
I realizied, "this is one heavy chunk of copper".
After looking through the manual which came with the unit.
I thought, maybe, the bracket/base plate
that comes with the heatsink may not be strong enough
to hold it up (In the ATX confitguation).
... Being supendid above my PCI cards and PCI devices ...

Question: Do you know of a company
that makes a more heavy-duty bracket/base plate?
The bracket which comes with the heatsink is rather weak.
I don't trust it.

Thank You.

Awaiting your response.

Rumba352.
 

Answer:Need for a better heatsink bracket.

I'm sure the bracket they supplied will work fine.
 

1 more replies
Relevance 39.77%

Hello people, I have bought a HP ProBook 470 G3 and I am trying to insert a second hard disk into the notebook. The first drive is a SSD M2. I found out that there is no bracket inside the notebook, so I cannot secure the hard disk. I have found the HP 828147-001 HDD Hardware Kit, but then I get two different brackets. One with three screws and one with four screws. I need the one with four screws. I hope one of you can help me to find the right one what will fit in my notebook. BrokenWing PS: I am located in The Netherlands.











Solved!
View Solution.

Answer:HP ProBook 470 G3 HDD bracket

Dear Customer,  You have found the right part number for the HDD Bracket.  828147-001You may use this and it is compatible. For more information sending you the complete guide. Please check the below link. http://cdn.cnetcontent.com/f0/f9/f0f98127-beaa-45b0-bb5b-58a10d8ef9a5.pdf  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee  

3 more replies
Relevance 39.77%

So i just received my HDD HARDWARE KIT(part# 905708-001) and there aren't any screws included for the hard drive and screws for the bracket to base.I didn't know you had to buy those seperate..and if so..where do i even find them?I tried HP partsurfer already..

Answer:Where to buy screws for bracket

Hi,Manual: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/manualsResults/?sp4ts.oid=104772...Yes you need to buy Screw Kit 912377-001�For $14 , HP part store sells this:https://parts.hp.com/hpparts/Search_Results.aspx?mscssid=7CBF0EB54B2D4F7E917730DDCB6E68AA&SearchIn=P...RegardsVisruth

1 more replies
Relevance 39.77%

Trying to upgrade the coolmaster fan on my M3970BM (angelica) mother board only to find out that it has no holddown bracket in it. Upgraded the amd cpu but need need a better fan but they only come with the parts for the fan--no one knows what will fit on this board or what demension size for the amd hold down...anyone have an Idea...

More replies
Relevance 39.77%

hi
So I got a gs724t netgear router and was wondering where to get the rackmount bracket for it. This the first time networking my server and all other components to a rackmount cabinet so if there is a certain site that would have everything I'll need(like brackets for my servers and components) I'd love to know.
Thanks
 

Answer:rackmount bracket, where to get

if you cant find one this might help: http://www.sweetwater.com/store/detail/UTR1/

$24 or so w/ FS

Its a bit of a tight fit since its a shelf, but you might be able to squeeze it in there. It comes with some big velco double-sided tape. I used one... here:

http://img.photobucket.com/albums/v260/Omega123/IMG_1868.jpg
http://img.photobucket.com/albums/v260/Omega123/IMG_1829.jpg
http://img.photobucket.com/albums/v260/Omega123/IMG_1832.jpg
 

3 more replies
Relevance 39.77%

I have a pci network adapter plugged in right now without its mounting bracket. The reason is because the bracket seems to be too short, as in the top of the bracket does not go high enough to fully insert the pci card, so I ended up taking the bracket off to get the card to fully insert. A picture of the card can be found here:

http://www.newegg.com/Product/ShowI...INKSYS WMP54G PCI Wireless-G Adapter - Retail

Now without the mounting bracket, it'd be real easy for something to hit the antenna and possibly snap the card.

Is there anything I can do to safeguard against this?
 

Answer:pci card's bracket...not the way it should be

Do you have cards in any other expansion slots? Are they properly seated without the problem you have with the wireless NIC?

How much too short is the bracket on the NIC?

Is your system a custom build, or was it assembled by a brand-name manufacturer?
 

2 more replies
Relevance 39.77%

Hello; I am looking for a replacement CPU Mounting bracket, not to be confused with the CPU plug in socket. One of the four securing tabs which attach the entire CPU module [CPU Fan, Heat Sink, and the CPU]  to the MB which is an  ASUS P4SD-LA Stingray. I think it's very possible that this bracket tab gave up due to excessive heat, Is there any way to monitor overheating of the CPU on these older PC's? That is, except for a $150.00 water cooler coils. FYI, I am running Ubuntu 15.04 on all of these older machines. Thanks, TennrsseeJoe  

Answer:CPU Mounting bracket

TennrsseeJoe Hello;Allow me to welcome you to the HP forums! Monitoring CPU temps in the Linux world is harder to do due to the lack of drivers and software apps to do that. I have successfully used the app Gkrellm on several Linux distros, but you have to install an app called LM-Sensors to see if the CPU temps can be read at all. This is a complicated process, and you really need to post this issue on the Ubuntu Forums -- where folks can walk you through the details:  http://ubuntuforums.org/Good Luck

2 more replies
Relevance 39.77%

I just got a Thermaltake V5000D and an Aspire 500 Watt PSU and the PSU fits perfectly into the case, but the screw holes don't match up and the case didn't come with any kind of bracketry for the PSU. There somewhere I can get a bracket for it or something?
 

Answer:I missing a PSU bracket?

You shouldnt need any brackets, should be standard setup.
Are the mounting holes close?
Are you trying to install upside down?
Drill some new holes.
 

1 more replies
Relevance 39.77%

I just purchased a Phoenix Envy 850 that has a 256 Gb SSD HD as primary drive.  I would like to add a 3.5" SATA HD as a secondary drive, but I'd like to know if I need a mounting bracket before I can install it.   What is the part # for this bracket? Thanks

Answer:Bracket for 3.5" SATA HD

Hi, Please try the similar post:    https://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Adding-2nd-Hard-Drive-to-Phoeni... Regards,

1 more replies
Relevance 39.77%

Im fixing up a HP h8-1070uk for a friend and hes lost the metal plate that holds the GPU in place on the back of the case. It looks like this  -   http://h20564.www2.hp.com/hpsc/doc/public/imageServlet?DOCID=emr_na-c03028387-16/c02885899.jpg im wondering if anyone could identify the part (name/number) and could let me know where i could find such a part or if something else could hold the gpu/pci in place.  Thanks for any help.  Adam

More replies
Relevance 39.77%

I am about to order a probook 470 G4 with 256GB SSD. I want to add the harddisk from my old laptop that recently died to add some diskspace in case I need it (I have the disk anyhow). Looking at the service manuals for the G3 and G4 versions of the Probook 470 I see 2 different numbers for the brackets:In the G3 manual I see 828147-001, in the G4 manual it says 906002-001. The part numbers for the hardisks are however the same for both revisions of the 470. That suggests that this is the same or similar part. I cannot find the number mentioned for the G4 online (except in Eastern Europe). the G3 version is however available here in the Netherlands. can somebody explain the difference? Will the 828147-001 fit in the G4?

More replies
Relevance 39.77%
Question: 2.5 Inch Bracket

I was looking online for a 2.5 inch bracket for my SSD. I found this "Dual Bracket"
Newegg.com - BYTECC Bracket-35225 2.5 Inch HDD/SSD Mounting Kit For 3.5" Drive Bay or Enclosure Are you able to put two drives in the one bracket and thus double your space? I have never heard of these. My question is, if I get one of these now, can I just put one drive in it now and possibly use the second space for later or do you have to put two in at one time to make them secure? Thanks,

Answer:2.5 Inch Bracket

From what i can tell looking at the pictures it seems like it should work with one or two SSD's. Some of the user comments seem to say it works with one SSD ok. The good news - it has free shipping. Very often on cheap items the shipping costs more than the item. And it comes with a free 18" SATA cable if you need one.

5 more replies
Relevance 39.77%

I bought a ThinkCentre Edge 73 in small form factor, and I wish to install a SSD in it in addition to its 3.5" hard disk and the optical drive.From various pictures of the insides on several external vendors' sites, I was led to believe before the purchase that there would be matching drive slot under the optical drive.However, now I see that apparently an additional special drive bracket is required, and that this bracket would have been included only if I had bought another model - one that would have come with an SSD from the beginning. Could I buy this drive bracket as a spare part, and how?I have not been able to find it anywhere on the web site.Edit: I would also need a new power cable with a third SATA power connector. I think I could make these myself, by modding a conversion bracket and crimping a new SATA power cable, but buying them would be better. Thanks in advance for your replies.

Answer:2.5"/SSD Drive Bracket for E73 SFF?

Check from page 141 ... Link I would say you need 04X2175 "SSD bracket", but am not 100% sure (source: Link). You will also need 54Y8286 SATA Power Cable and SATA data cable ...





***Disclaimer: I am not Lenovo employee. While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

6 more replies
Relevance 39.77%
Question: Bracket Broken

 Good Afternoon,The left bracket is broken, this laptop has just past its 2 year mark and is on it's last leg. We took this computer in immediately once we started having problems in the spring of 15, while under warrenty to the HP troubleshoot store in Rapid City, SD (very poorly managed, technitians great, manager aloof and maybe out of her experiance? Also took 4 days to get it back when said it would be able to pick it up the next morning/Fri) They said there was nothing they could do, a bracket, bolt, or nut broke. All they did was tighten the right bracket. We bought extended warranty from Best Buy in Sioux Falls, SD sometime in the fall of 2014. We were charged $50 some dollars for nothing. This computer is flimsy, cheap, and over heats. I would hope you guys put more into structural frame and cooling systems on top of just looks and internal make up going forward to your customers. My wife wanted to buy a different computer and I said no because I believed in HP at the time of purchase...rather questionalbe.Earnestly, Tim.

More replies
Relevance 39.36%

Hello everyone. Just a quick question. When I installed the metal bracket for the NVMe ssd drive ( part no 01AX994) in the drive bay, it does not fit very snug. I.e. it moves around a tiny bit when pushed. However, it does not fall out. It' s not just a very snug fit.  Just wondering if this is normal or not?

More replies
Relevance 39.36%

I am looking for a part number for the mounting bracket for the power supply for a ThinkCenter A60 (8700-25U). I have the power supply part number of 41N3094, but need the mounting bracket.

More replies
Relevance 39.36%

i just installed a new msi motherboard and everything started to load and after a few minutes it just died while i was trying to load the os. i put in the d bracket that came with the board and the leds indicate that the memory module is damaged or not installed properly. does this mean the memory mod that i installed on the main board or on the mainboard itself
 

Answer:d bracket 2 on msi ms-6570 motherboard

It probably means the ram that you have in it, however i am not to good with msi so you shoudl check your mobo manual. Try taking out the ram and putting it back in. See if you get any wierd beeps. Make sure your ram has the right frequencies and speed.
If you overclocked it undo it, if possible test the ram on another system. Double check your jumper settings to see that you havent messed up anythign and check your dip switches (if you have any).

Hope i helped.
 

3 more replies