Computer Support Forum

Is the Lenovo G400 has a light on power button when turn on?

Question: Is the Lenovo G400 has a light on power button when turn on?

Is the Lenovo G400 has a light on power button when turn on?

Relevance 100%
Preferred Solution: Is the Lenovo G400 has a light on power button when turn on?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Is the Lenovo G400 has a light on power button when turn on?

I have already this problem ,I buy a G400 S but during turn on I do not know the power button LED light must be illuminated or not...

1 more replies
Relevance 92.66%

i have y500 15.6 HD full 2x gt650m in (SLI) the problem is i both it oct 24, 2013, and 15 days i just play games for 8hrs straight, i shutdown manual, and when i turn it on my y500 wont boot up, power button light on,backlit light, fan blowing and split 5 sec all is off, i think mother board problem, i return it for 1 yr warranty to replace d unit factory defect **bleep**......im curious did you experience it to your y500 ADMIN please reply THANK YOU GODSPEED

Answer:lenovo y500 Wont boot up, Power Button light on,Backlit Light on,Fan Blowing Fast 5sec all is OFF

Hi Wacky78900,
 
Welcome to Lenovo Community Forums!
 
I?m sorry to hear that your Y500 Laptop is not turning ON after playing game and turning OFF manually, I suggest you to perform the Flee-Power and check the issue. Below are the steps to check and resolve the issue:
 

Remove the battery and any other peripheral device connected to the computer.
Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.

If the issue persists even after performing the Flee-Power and as the computer is in warranty, I would Strongly Suggest Calling Technical Support for Assistance. Click here to open a link where you can select the country and get the exact contact support number. I?m sure they will be a great help.
 
Do post us back for further queries.
 
Best Regards

Shiva Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 89.38%

When I turn on laptop power light comes with wifi light and caps lock light blinks but screen does not starts and still black.Model no.-HP Pav 15 n2 07TU

More replies
Relevance 88.97%

I first logged out of my computer and came back and I noticed an orange light on the power button. I shut it of and turn it back on about two times with the same results of an orange light. I then shut of the the extension that houses 10 plugs. When I turned on the extension I turned on the computer the power button didn't give off a blue light or orange light. The VGA cable, mouse, keyboard, Ethernet cable are all plugged in. I later removed all the connects to the computer gave it a minute and plugged it all back in. There is a solid green light on the back under the power cable. The fans turn on there is noise coming from inside the computer a soft humming and light fan from the back of the computer. But the power button will not turn on. The monitor light is orange and says "No Input signal Input 2,Go to Power Save." When I switch to input 1 it reads "Cable Disconnected Go to Power Save." What internal issue could this be?

More replies
Relevance 87.74%

so I don't know what to call it,but the light of the power button is turning on and off when I accidently unplug,so I just wanted to know what that means.

More replies
Relevance 86.51%

Hello,
After upgrading my OS from Windows 7 to Windows 10, When I manually click on "Start-------> Shutdown " my power button light wont turn off, screen goes black but the bottom is still giving light, it only turn off men I press it 7 sec ore remove the battery. Can some one help me and solve my problem. 

More replies
Relevance 85.69%

Hello guys! My lovely laptop Lenovo Ideapad Y570 has some problems with the light of the power button. The light of the power button doesn't work, the button works perfect and all the other buttons(touch buttons) work good and the lights are on when I start the laptop but the light of the power button is off. Where is the problem? It could be the band of the power button light? PS: Sorry for my english, I hope you will understand my message













Solved!

Go to Solution.

Answer:Lenovo y570 power button light problem

hi Stefy333,
 
Welcome to the Forums.
 
From your description, it looks like there's a problem with the Sensor Board (this is the area where power and touch buttons are located).
 
- Link to picture
- Link to picture
 
You can try to reseat the sensor board to isolate any possibliity of a loose connection but if this doesn't work, you may need to replace this part.
 
Reference:
Y570 Video Disassembly Guide (see FRU Vdeiso)
 
 
Regards

1 more replies
Relevance 83.23%

Hello people, an hour ago I put my Lenovo 510p into energy save mode. When I tried to reactivate the laptop nothing happens. I removed the batterie and the power cord, put everything back in and hit the power button: The power button and the "on" LED on the front shines (continuously) but nothing else happens. No booting sound, no keyboard LED, no nothing. Removing the battery and power cord, pressing power button 10 times in a 1 second interval, then holding it for 30 seconds hasnt helped. Any tips what I can do furthermore? GreetingsDix

More replies
Relevance 83.23%

Hi, My lenovo IdeaPad Y510p laptop is showing the light on the power button but does not get started. I even tried removing the battery and running the laptop only on power cord but still the problem persists. It seems that the laptop is not getting booted at all but will keep on showing the light on the power button of the laptop. Pleaes let me know what is supposed to be done.It has been just two months since I bought this laptop and it was working fine earlier. Thanks for your quick reply.  

Answer:Lenovo Ideapad Y510p laptop not booting but showing light on power button

Hi Harsh,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that your Y510p Laptop is not turning ON. I suggest you to perform the Flee-Power, below are the steps to perform the same:
 

Remove the battery and any other peripheral device connected to the computer.
Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.

If the issue persists even after performing Flee-Power, I would suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed.
 
Click here to open a link where you can select the country and get the exact contact support number. I?m sure they will be a great help.
 
Do post us back for further queries.
 
Best Regards
Shiva Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

6 more replies
Relevance 82.41%

Hi there, I bought my Lenovo Y40 on the Lenovo Web site a couple months ago and recently, to turn on, I have to press the power button twice. When I press just once, the Lenovo`s logo is displayed on the screen, but after 2 seconds everything turns off. On the second trying, finally the laptop turns on and the windows is started.In addition, rarely the laptop stucks on the lenovo`s logo screen, being necessary to hold on the power to reset it. Has anyone had some problem like these describe above? Thank you.Pedro Lopes.













Solved!

Go to Solution.

Answer:Lenovo Y40: Needs to press the power button twice to turn on

Welcome to the Lenovo Community Pedro !
 
Try doing what I call a soft reset of the BIOS. This can be useful in some situations to resolve hardware conflicts Here's how......1. Unplug the charger / adapter 2. Remove the battery. 3. Press and hold the Power Button for 15 seconds. 4. Re-install the battery, plug in the charger / adapter if needed and power up the system to see if the problem was resolved.
 
If that didn't resolve the problem then I suggest you contact Lenovo Support for warranty service.  From what you have described there is a hardware problem with the laptop that needs fixing. You can find the phone number for Lenovo Support in your country or area by using the link below....http://support.lenovo.com/us/en/supportphonelist_alt1

6 more replies
Relevance 81.59%

Hai everyone, i'm new here....and need to know how to setup or configure my NOVO button manually.Cause i bought my Lenovo G400 with no OS buat now i have installed Windows XP in it and wanted to use the NOVO button for recovery problem...Please tell me how to setup the NOVO button, so i can recover my XP if it crash..Thank you....

Answer:How do i setup my NOVO button manually on my Lenovo G400?

OOOpss....still empty...Any help or comment would be appreciated...thank you

5 more replies
Relevance 81.59%

my laptop lenovo g400 not turn on, no charge... the battery is good and charger also already tested in other laptop of the same model. I can do ? It is new... 

Answer:laptop lenovo g400 not turn on

Hi djalex9,
 
Welcome to Lenovo Community Forums!
 
Remove the charger
Remove the Battery
Hold the Power button for 15 sec
Reconnect the AC only (Important that you connect the AC only / Without the battery)
Turn it on
 
See what happen
Does it show Light on the Power Button?
 
Regards
Solid Cruver
 





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Relevance 81.59%

Last week my lenovo laptop did not turn on. I did the below:1- unplug the AC adapter and take out the battery. Then, push the power button 10 times in a row at one second intervals. Next, push and hold the power button for 30 seconds. Then put the battery back in and pushed the power button, but not turn on.2- unplug the AC adapter and take out the battery. Then, push the power button 10 times in a row at one second intervals. Next, push and hold the power button for 30 seconds. Then put the AC adapter (without battery) and push the power button,but not turn on.  Today i tried to turn on again, and it worked...  but when i plugged the battery to the laptop, it went inmeditatly off and does not turn on. i tried the same steps above but did not work. how can i solve the issue?

More replies
Relevance 79.13%

i have a lenovo g400, once i turn on it only the lenovo name appears in the screen and then it turn off automatically and then turn on and turn off again and so on... also I was having problem that my Lenovo G400 laptop did not display Press F2 to Enter Setup during the boot process, and because of this, no amount of hammering the F2 button would allow access to the BIOS.  I attempted all of the standard fixes, pulled the battery, held power down for 30 seconds, removed the HDD -- nothing would cause this to appear. i dont know whats the problem of my laptop..please help me to fix it..

Answer:LENOVO G400 TURN OFF AUTOMATICALLY AND NOT LOAD BIOS SETUP

hi PRAY2431,
 
Welcome to the Lenovo Forums.
 
Can you try to access the BIOS by pressing the OneKey Recovery button.
 - Link to picture
 
If you manage toget in, try prssing F9 to reload factory defaults then press F10 to save and exit (this should reset the hardware configuration of the machine).
 
If you still can't get into the BIOS and the machine still turns off after POST (lenovo screen) then there's likely a hardware component that's failing. If you have a spare PC, try to create a Lenovo Bootable USB Diagnostics and boot from it by pressing F12.
 
Alternatively, you can contact Lenovo (for service) or contact one of the Lenovo Authorized Service centers below
 
Service Provider List (Philippines)
 
 
Regards

1 more replies
Relevance 77.08%

Hi. Tonight I had a problem with my laptop. It was in sleeping mode, and when I open the lid there were no mouse function and no touch screen function. So the only thing I could do was to press the power button for 3 seconds to turn it off, but it didn't completely, because the screen turn off, but the power button light is blinking just like when it is on sleep mode, and I'm not sure if the hard drive light was on, off or blinking before this, but now is blinking. I press the power button and nothing happen, I press it for 3 seconds and nothing happen. I even did the HDMI connection to another monitor, but both monitors don't show anything, not even recognize that something is connected to the HDMI port in the new monitor. There is no sound, nothing, just the 2 blinking lights. What should I do? Thanks PS: I'm not sure if it's Windows 10 32-bit or 64-bit. It was upgraded from Windows 8

More replies
Relevance 74.62%

My computer is getting power but screen is black and amber light turns on for 3 seconds then nothing.  I tried draining the power but still no change

More replies
Relevance 72.57%

Ok, so I also made a video explaining my problem and doing some tests on it.  I've also attached a profile of all my computer's specs in the attached PDF form.  You can view the video at this link:https://goo.gl/photos/VrvjcAJy5beRt4B38For some reason, all of a sudden out of the blue, the red LED light of my Microphone mute button will not turn off.  No matter how much I press it, it doesn't go away.  It's really annoying.  In addition the button doesn't work.  I'm fine with the button not working as I've trained myself to not rely on those things anyways.  I really just want the light to go away.  It's very distracting.  The light stays on even in BIOS and the button is not doing anything. Thanks

























Belarc Advisor Computer Profile.pdf ?325 KB

More replies
Relevance 72.57%

Toshiba Satellite A25-S2792 w/ XP & P4 has greenpower chord is lit and yellow battery light is flashing when power chord is plugged in. After I press the power button, the power chord light changes to yellow, begins flashing and the battery light goes out. Removing the battery gives the same results. Pressing and holding power button down for 20 seconds w/ battery out yields same result as well. Suggestions?
 

Answer:A25-S2792 doesn't power up yellow light flashes after pressing power button

The motherboard is bad. Have you tried reseating the memory?
 

10 more replies
Relevance 72.57%

My laptop was working fine yesterday, charging and powering on an off normally. It updated without my telling it to. When it was complete (since it said don't turn computer off until finished) I either just shut the lid or I shut it down when it was done. This morning when I wake up and try to turn it on it won't power up. Then I noticed that the power button was blinking, like it is in sleep mode, tried pressing 10 times then holding down power button for 30-60 seconds and still nothing. Next I saw that although the power is plugged in the battery light won't come on. I don't know if it is charging (it could be dead). I tried a bunch of different outlets and that isn't the issue. I also listened to the computer and there is a very soft high pichted noise that dissapears if you unplug it, and that when you hit the power button and it starts blinking, the sounds changes fom high to lower pitch and back again over and over. But no other sounds or fans kicking on or drive spinning. I am pretty sure it isn't the power cord but have no way of checking. And I can't remove the battery without voiding the warrenty. Anyone have any advice, besides calling to have Lenovo send me a box to send it back to Lenovo since it is only 4 months old and still under warrenty?

Answer:Lenovo Edge 15 laptop 80K9 battery light won't come on, power light blinks

Suggest you eliminate problem 1. Do you have spare power supply unit? Worth trying that first. Your battery may be in sleep mode and won't wake up as battery is drained and hence needs charging. 2. You can go to local retailer and suspect a good one (John Lewis) will let you charge it for 30 mins. Ideally go back to person you bought it from. 3. Once you are in use restore to go back to last working point. I have to telll you the support from Lenovo and Microsoft was very very very disappointing. I tried to even return the PC and swop for HP as mine is only 2 months old. However, the answer was send back to Lenovo. Hope you find a way to get it charged  

2 more replies
Relevance 71.75%

Hello, I bought a new laptop last week (Inspiron 15, 5000 series), I saw that the turn on button does not show the light on when I use the computer. I am not sure if it is a hardware issue or if I forgot to do something to turn on.

The backlight is working but the turn on button never showed the light.

Would you help me please?
See the below picture for your reference.
Thank you,

Pierre

More replies
Relevance 71.75%

When I press the blue Lenovo Care button on my SL400, it is woking fine. But the blue light of the button is never on. I checked up in the customize, under the 'Button Light' tab, but there I couldnt change any settings as everything is greyed out..Please help on how to switch on the light of the Lenovo Care button! Thanx in advance.. 

More replies
Relevance 71.75%

Hi,
In reference to the following posting, http://en.community.dell.com/support-forums/laptop/f/3518/t/19676126:
I am not the individual who initiated this query but I did have the same issue with my Dell Inspiron 5547, where it wouldn't turn on after a power button shut down.
I followed Hema's instructions by removing the battery and charger and then holding down the power button for a few seconds, and then putting back the parts. It seemed to have done the trick... At least for now. Is this just a temporary fix?
While doing a Google search for a solution I seem to have encountered a number of people who experienced the same issue. Can you also explain why this happens with this particular Dell laptop? Is it a model flaw?
Thank you

More replies
Relevance 71.34%

Please I need help, my system power light comes on and goes off immediately after I press the power button. Please what should I do?

More replies
Relevance 71.34%

Help me please my Monitor not powering On i tried another power cable but no lucky so how can i troubleshoot i check the warranty service 2019 till expire

More replies
Relevance 71.34%

I have a Y530 laptop.  It originally came with Windows Vista.  I upgraded it to Windows 7 several months ago.  Lately the laptop will not come on using the power button. I have tried all the suggested remedies -- remove the battery, remove the power cord, hold the power button down for 15 seconds, reinstall the battery, reinstall the power cord.  It still will not come on using the power button. I find that if I press the "One Key" -- the key above the power button, the laptop comes on but goes to the Recovery page.  I tried doing a recovery one time, but was presented with a screen telling me there was an error with some files during the recovery.  I can understand this since I'm sure the recovery partition was designed for Windows Vista and things do not work correctly since the computer is now running Windows 7. The next time I turned the computer on using the "One Key" -- the power button still does not work -- I skipped the recovery and had the computer reboot instead.  The computer booted into Windows 7 and worked fine. This is not the ideal situation when I want to boot the computer.  I do not want to have to go to the recovery screen and reboot from there. Is there any way to get my computer to respond to the power button again? Thank you for your help, Dan Wilkinson

More replies
Relevance 70.52%

hi guys the on /off button on the wifes laptop broke up and was replaced with a new betzel incorperateing the buttons, it was also noted that the button on the pcb underneath was badly damaged also replaced this part
however laptop will now not start at all, battery charge light on, and on/off button feels mechanically sound .

any thoughts greatly appreciated ( be gentle and plz anwser in plain simple terms as im not a techhead)
 

Answer:Solved: hp g60 lap top won't turn on after power button betzel & button pcb

8 more replies
Relevance 70.11%

the light on the power button Dell desktop Inspiron 660s is not working

Answer:the light on the power button

Hi pompei,Thanks for posting!Please read the following troubleshooting tips.  If the light does not respond after following those, the LED may be defective.  If you are under warranty, please contact the tech support department for troubleshooting and possible repair.  If you are not under warranty and you don't want to do the work yourself, you may wish to contact a local computer repair shop for assistance.  Thanks.Regards,Robert

1 more replies
Relevance 70.11%
Question: power button light

Whenever I shut down my laptop, the power light doesnt go off everytime. It goes off 1 in 10 times. Rest of the time it remains on and if I dont notice that whole of the battery is consumed.I have to press power button to switch it off most of the times after giving shut down option

Answer:power button light

Dear Customer, Try the following. Open Settings and select System.  Select Power and sleep, then click on Additional power settings - in the following window, click on 'Choose what the power button does' in the left hand pane. In the subsequent window, first click on 'Change settings that are currently unavailable' ( near the top of the Window ) and then remove the checkmark from the box against 'Turn on fast start-up (recommended)'.  Click the Save Settings button, then close any open windows and restart the notebook. When windows has reloaded, download the IMEI driver directly from Intel on the following link, unzip the package and run the installer. https://downloadcenter.intel.com/download/26127/Intel-Management-Engine-Consumer-Driver-for-Intel-NU... When the installation has completed, restart the notebook. When the machine has reloaded, re-enable Fast Start-up and reboot the notebook once again - let Windows fully load for a few minutes before checking.  

1 more replies
Relevance 70.11%

Recently purchased the Aspire TC-705 desktop. Everything is fine. But I do have question on the power button light behavior that puzzles me. On occasion the power button will continously blink white while the system presumably goes into sleep mode but sometimes it will not blink but instead exhibits the stead white light. So the question is: Why does this desktop power button light blink and sometimes not while in sleep mode?" Running 8.1 windowsset to turn off display after 10 minutesset to turn off disk after 20 minutesset to enter sleep mode after 30 minutes  













Solved!

Go to Solution.

Answer:TC-705 Power button light

If the power light isn't blinking, then it's not in sleep mode.  Your monitor might be in sleep mode, but your computer isn't. There's several things that can prevent your computer from sleeping at the designated time (with inactivity).  One of the most common culprits is Windows Media Player (multimedia).  You can check your advanced power settings to change "prevent idling to sleep".

3 more replies
Relevance 69.7%

I just bought Satellite A300-U01 ... well I've seen other A300 their first button on Media Keys works to TURN of the lights on laptop as well. My works for MUTE.

How can i change it?
I check in Toshiba Assit it gives to option 1 for Mute another for DVD?

Answer:Satellite A300 - Control button supports Mute and don't turn the light on

Hi

This is an Australian series. Am I right?
I don?t know if this is possible on Australian notebook series.

On Toshiba European notebook A300 you can change the button configuration
If you want to assign other functionality then you can configure it again in Toshiba Control button. Check you Toshiba Assist -> Optimize -> Toshiba button support

Furthermore go to Toshiba HWSetup and enable the ?Illumination?.

Greets

4 more replies
Relevance 69.29%

When i turn on my HP Elitedesk I get a SOLID RED LIGHT on the power button that doesnt go away. I opened the case and blew it out with a can of air. I also re seated the Ram. I ren Quick Diagnostics but everything passed. The PC still boots up and works like normal. Does this indicate a bad HDD. What does a solid red light on the power button mean? Its not flashing or beeping. Remains solid red throuought use. 

More replies
Relevance 69.29%

Hi all , My daughters PC was working just find until the on and off button started shinning ORANGE?
The computer does not turn on anymore but when it decides to it switches off by itself ! PLEASE HELP !!
 

Answer:Power button has Orange light !!!!

make and model of the pc
what windows version

Lets try doing a hard reset
Unplug the Power Cord
Now hold the Power Button down for 60 seconds
Plug the Power Cord back in
Start the PC up
If the PC starts OK, then all should be fixed

=================================================================

often its
Orange lights on dell are power supply issues.
replace power supply

=================================================================

but i have read here of a fix, for Dell., not tried, but appeared to work for the poster
http://www.tomshardware.co.uk/forum/6230-2-orange-light-dell-gx270-power-button
1. Plug the computer into a power strip that has an on/off switch. Turn the power strip on. Press the computer power on button to start as normal, but after after one second turn off the power strip switch just long enough for the fans on the computer to slow down, but the amber computer led doesn't turn off and then turn the power strip switch back on. Computer should start and run fine. Computer typically can be shut down for up to 5 minutes and restarted normally--any longer and you have to sue the power strip power switch routine again.Click to expand...
 

2 more replies
Relevance 69.29%

Hi,
Vostro 460 Mid Tower system, circa May 2012, Core i5-2400, Windows 7 Pro 64 bit
I noticed that recently the light in the power button is completely out. No blue, no amber, no steady, no blinking light - nothing.
Other than that, the PC works just fine. Turns on, runs, everything else is fine.
It's just a little disconcerting, because when it goes into powersave, there's no visual indication that the computer is on.
Any thoughts about what this might be? Loose connection to the motherboard? Are power button LED's in the Vostro 460 known to burn out?
Thanks

Answer:Vostro 460 - No light in power button

Led is burn out. You can grab a similar LED bulb and replace the old one. This will be a simple soldering exercise.

1 more replies
Relevance 69.29%

hello, i have a dell vostro 200 desktop whenever the cord is plugged into the power supply the pc takes power and it runs normally but there is something wrong when the cord is plugged into the power supply it shows on the power button a yellow light reflecting the board light which is yellow then i press the power button it goes to blue which is the normal color when powering on the pc so does anyone have any idea about that yellow light before the pc power button goes on ? waiting for any reply that can help thanks in advance!

More replies
Relevance 69.29%

My original OS was Windows 8 and I upgraded it to Windows 10. When I used my laptop too long and shut it down, the power button light doesn't go out. I still have to press the power button to shut down completely. Any suggetions ? Thanks

More replies
Relevance 69.29%

Dell optiplex 755, mini tower . My son pressed power button and computer made an ear-piercing noise and would not boot up. The power light comes on, but no fan, no post, no beep codes. Monitor displays "no signal". Is this a bad power supply? Bad motherboard? Not sure where to start, need HELP!
 

Answer:Power button light on, no boot.

By
Npbptexas said:


... and computer made an ear-piercing noise and would not boot up.Click to expand...

do you mean a single beep, or multiple beeps? These codes will identify the issue.

Specifically with Dell desktops, you can refer to these beep codes:
1 beep: BIOS ROM corruption or failure
2 beeps: RAM not detected
3 beeps: Motherboard failure
4 beeps: RAM failure
5 beeps: CMOS Battery failure
6 beeps: GPU failure
7 beeps: Bad CPU

Additional Dell error information can be found here.
 

2 more replies
Relevance 69.29%

Not sure if this is where I should put this or not, but I have a problem.

When I shut down the computer, the fan stays running and the light on
the power button remains lit with a yellow/amber color. What could be
causing this?

It just started happening yesterday. The only way to get the computer
back up is to unplug it and plug it back in. Pushing the power button
when it is like that does not work.

It is an e-machine, 2.7 GHz Intel Celeron, 80 GB with 1G Ram and I have
Windows XP
 

Answer:Power button light stays on??

How are you shutting down? Just hitting the button? Has the machine been configured to go into standby when that happens, instead of powering off? Does it work when you click Start --> Shut Down, and select Shutdown?

Here's how to check:

1. Right-click on the desktop
2. Select 'Properties'
3. On the 'Display Properties' dialog, select the 'Screen Saver' tab
4. Under 'Monitor Power' press the 'Power' button
5. On the 'Power Options Properties' dialog, select the 'Advanced' tab

The setting we are looking for is listed here under 'Power Buttons'. If this is set to standby, it will generate the symptoms you are experiencing.
 

6 more replies
Relevance 68.88%

i shut it down after charging it for 2 hours, it's battery is 100% charged

More replies
Relevance 68.47%

PC WONT POWER ON' FANS RUN' NO DISPLAY' PWR BUTTON WONT TURN PC OFF 

Answer:PC WONT POWER ON' FANS RUN ' NO DISPLAY ON MONITER 'POWER BUTTON WON'T TURN PC

If you want assistance you need to provide a lot more information.1) Tell us about your system2) What is new or different since the last time everything worked properly (ie, new hw, new sw, virus, error, etc)?3) Tell us EXACTLY what is going on IN DETAIL

9 more replies
Relevance 68.47%

PowerEdge T20 won't power up, power button & fans repeatedly turn on/off forever
1 year old. Press the power button, power button lights up amber, then white, CPU fan spins up briefly, then a beep and the power button turns off and the fan shuts down. Three seconds later the cycle repeats forever until I depress the power button for 5 seconds.
Is this a bad power supply? A bad motherboard?

More replies
Relevance 68.47%

hello, i justgave my old system to my dad. he installed a flight sim on it and was having a go. screen went white, so he restartedor shut down. no th epower button doesnt seem to work. the lighs are on on the keyboard but it just doesnt power up. the temp was running a little high when he left, around 50. is it possible that the temp has rose so high that it has blown th echip, thus preventing it from powering up?

Answer:light on keyboard but power button inoperative?

Things like "screen went white" and "keyboard light on but doesn't seem to power up."It will help if you can describle what happens when switching on from "cold".... any sounds of fans or disks, any lights come on at all except the keyboard's "power" light?Do you hear any beeps? Does the monitor stay black or show any messages at all?A long shot, but worth doing if you are happy to look inside the box, is to make absolutely sure the video card is properly pushed home and the data cable at the back of the computer is well connected.

2 more replies
Relevance 68.47%

I downloaded and installed a bios from a Lenovo website.afer installing it asks to restart.after restart it update the bios and said your bios have been installed.then nothing is came.if I powered it on the screen not switching on and only the power button light on. Even keyboard light blink while I press the power button ,then it off.even the caps lock and num lock buttons also not switching the light on. I can hear the fan running inside the laptop.thats only working.

More replies
Relevance 68.47%

When closing the laptop, it goes into sleep/hibernate mode, but the power button keeps blinking. Many times I use the laptop at night right before sleeping but the blinking light is extremely bothersome in the otherwise dark room. Is there a way to disable this?

Answer:Disable blinking power button light

I don't think there is a way to turn off the blinking light. It happens on all Hp laptops when they go into sleep. (the power button keeps blinking but not on hibernation).

2 more replies
Relevance 68.47%

To be clear, my PC turns on and seems to run exactly as it should, so this is possibly more of a cosmetic/superficial issue. The little light located on the power button no longer lights up when the PC is powered on. Strangely, the light still blinks on and off as it should when the PC is in sleep mode, so the light still has some functionality.My PC is only a couple of months old, so I'm just a little concerned that this could be a sign of things to come. I hope that other components don't start failing on me.Does anyone here have any possible explanations?Thanks.

More replies
Relevance 68.47%

Hi all,is it possible to switch off the light on Power Button? Its so shining and its really uncomfortable. ThanksJan

More replies
Relevance 68.47%

I bought this laptop few days ago and from the beginning i noticed that light around my power button is not working.

so now i'm in dillema to return it or not?

Everything else is working fine,but because of it's price i expected to work properly.

And what may be the reason for that?

Tnx

Answer:Satellite P50-B-103 - light around power button is not working

As far as I know the power button or to be more precise, the margin around the power button should be lit / illuminated.

In my opinion its not serious issue but if it?s a problem for you and you are not satisfied with that, I would recommend you to contact the dealer in order to replace the unit.

Greetings

1 more replies
Relevance 68.47%

I was changing the graphics card of my PC to a GTX Gefore 730. After I installed, a orange light on the motherboard came up when I plugged in the power cable. Now the power button doesn't work (nothing happens when I press it). What happened? Did i install the graphics card wrong or is the power supply faulty?
 

More replies
Relevance 68.47%

Hi there,My son's computer recently started having this problem in which, after 5 minutes of the computer running, and running fine at that, it suddenly closes down immediately, but yet, is not switched off: the power button which usually is a constant green starts to slowly flash yellow and the only way to stop this is to switch the computer off. Whenever he switches it back on it does the same thing, works fine for 5 minutes and then switches to nothing but the flashing yellow light, we have even tried it in safe mode and the same thing happens.Just to give some info which might help you, the computer is a Dell Dimension 5000 running windows xp home edition. The last time before the problem started, the computer had been left on for around 20 hours, and this has been happening for around 12 hours now. He did replace his graphics card recently, but that was 3 months ago and he hasn't noticed anything wrong with it in that timeIs this easily fixable or will a professional have to be brought in, and if so would it just be worth backing up the necessary dataand buying a laptop to replace it, as he is off to university in a couple of years so will need a new computer soon anyway.Well thank you in advance, just ask if you need anymore information about the computer, i'll do my best.Thanks!

Answer:Flashing Yellow Light on the power button...

Is the computer going into stand By mode on it's own? if so, check power settings in Control Panel

5 more replies
Relevance 68.47%

I first logged out of my computer and came back and I noticed an orange light on the power button. I shut it of and turn it back on about two times with the same results of an orange light. I then shut of the the extension that houses 10 plugs. When I turned on the extension I turned on the computer the power button didn't give off a blue light or orange light. The VGA cable, mouse, keyboard, Ethernet cable are all plugged in. I later removed all the connects to the computer gave it a minute and plugged it all back in. There is a solid green light on the back under the power cable. The fans turn on there is noise coming from inside the computer a soft humming and light fan from the back of the computer. But the power button will not turn on. The monitor light is orange and says "No Input signal Input 2,Go to Power Save." When I switch to input 1 it reads "Cable Disconnected Go to Power Save." What internal issue could this be?

More replies
Relevance 68.47%

T420 thinkpad light Power button flashes intermittently every second. the CPU cooler not turn on, nothing happens. which can be Tests which can do?

Answer:T420 thinkpad light Power button

Hi Decesaro,
 
Welcome to Lenovo Forums!
 
Is the machine logging into windows? If so request you to run the LSC test i.e. Lenovo solution center. Launch LSC, once you are in the Lenovo diagnostic page at the left side of the LSC home page you will see an option called checkup clikc on the option > hardware scan > Run scan.
 
Here is the link to download the LSC in case if you do have the one.
https://support.lenovo.com/us/en/documents/pd022501
 
Once you finish the test it will show is there any hardware issue or software issue with the machine.
Also, please let me know whether the machine is getting heated?
 
Please write back, whether the above steps helped you.
Thank you, have a good day.
 
Regards,
Naveen.v

3 more replies
Relevance 68.47%

Can someone tell me for sure that the LED on the power button is supposed to light up?  I swear mine worked.  I sent it to Dell to have the hinge problem fixed, which I see a lot of you had issues with.  Well, when I got it back the light no longer comes on.  Dell is trying to say it never came on.  That this model doesn't have a light.  I said, why does it have the rectangle clear lens for a light?  They just keep saying it doesn't have one.  They said they would send a copy of specs that show this.  Never did.  I have several people that agree with me.  But, looking for more support to confront Dell.  

More replies
Relevance 68.47%

Hi all, I have a new ThinkPad E460, day old. One thing I noticed is that the power button has a small circle in the middle of it, however on pressing it, the small circle on the power button does not light up to a green light, like on the other ThinkPads. So my question is, is this supposed to light up to a small green light or is the abscence of the small green light normal behaviour. Any help will be greatly appreciated.

Answer:ThinkPad E460 Power button light

it is normal, there is no led under power button 

3 more replies
Relevance 68.47%

Hi all, I have a new ThinkPad E460, day old. One thing I noticed is that the power button has a small circle in the middle of it, however on pressing it, the small circle on the power button does not light up to a green light, like on the other ThinkPads. So my question is, is this supposed to light up to a small green light or is the abscence of the small green light normal behaviour. Any help will be greatly appreciated.

Answer:ThinkPad E460 Power button light

it is normal, there is no led under power button 

3 more replies
Relevance 68.47%

i remember that the light on the power button once workedbut for a while I realized that no longer lights .I can send the laptop under warranty just for that ? or I can fix it myselfI tried to raise the bar of the button but could not find how to do..

Answer:power button light not work anymore

Welcome to the Lenovo Community !
 
The power button light is incorporated right into the motherboard circuitry and it is not something the owner can repair. Chances are the Lenovo Service Center will have to replace the motherboard in order to fix the problem.
 
As for Lenovo Support fixing the problem under warranty, that question would be best asked of the service center in your country as I can not answer that.  You can find the phone number for Lenovo Support in your country or area by using the link below....http://support.lenovo.com/us/en/supportphonelist_alt1

1 more replies
Relevance 68.47%

My roommate tried to "fix" his PC but god knows he doesn't know crap. The PC acts like it is going to turn on, but the light on the front of the tower does not light up, nor does the display. The light on the motherboard is solid green, and he is still able to charge a phone through the PC, so I'm guessing the power supply is good if it can do all of this. At this point I am at a loss because I'm normally very good with this stuff, any suggestions? and I don't believe it's the video card.

More replies
Relevance 68.06%

I have a Nokia lumia 900, and when you hold (or press twice I believe) it shows the thing to turn it off, right? Well when I press it one time quickly it does it..? I can't lock it unless I let it lock by itself.... Is there a fix?

Answer:I press the power button one time and it says slide to turn power off?

Originally Posted by YeMan I have a Nokia lumia 900, and when you hold (or press twice I believe) it shows the thing to turn it off, right? Well when I press it one time quickly it does it..? I can't lock it unless I let it lock by itself.... Is there a fix? Sell it :D

8 more replies
Relevance 68.06%

Hello.  Apologies, I'm a beginner to the hardware aspect, and really need help before I spend any money if I can.I have a HP Pavilion a250y (D7219V) CTO Desktop PC, I think it was 1-2 gigs of ram, and I know neither the video nor sound card were standard, though I forget what they are (was bought this way, with upgraded cards).  It had windows XP home with I think sp2.  That's all the specs I can remember off the top of my head.Yesterday due to the risk of water damage, I had to quickly move the computer out of my room.  (The computer did not get wet.)  I had shut it down before I started taking out the cables, leaving the power cord for last.  Since it was out I also decided to blow the dust out of it before putting it back.  I took it back in once things were safe and connected everything, and saw the power supply light come on, but when I press the power button, nothing happened.  I had no problems before this, so I can only guess either I had started taking the cables off too soon, or I did something wrong when I used the compressed air.Fortunately my files are on an external hard drive, but if I could still get it back running, I'd be very glad.Thank you for reading.  All help and time is greatly appreciated.

Answer:PC won't turn on, power light is okay

Hi,You may have accidentally disconnected one or both of the wires that go from your power switch on the front of your case to the motherboard while dusting. If you look carefully inside your case, you should be able to tell if this is the problem by following the two wires from the power switch to the board. If they aren't connected, or only one is connected then this is the problem. Let me know if this is the problem, and if it is I will tell you how to reconnect them.

4 more replies
Relevance 67.65%

Hi! I have an Acer Aspire switch 10. About hours ago, I charged it, and after a hour or two I opened it and saw critical low battery thing, I tried charging it in different outlets in our house, but all I can see is an orange blinking light in it's power button, I know that it should be steady, Please help! I'm charging it for almost a day, and still the battery is low, sometimes a recovery thing pops out the screen.

Answer:Abnormal blinking orange light in my Power button

Is the machine still inside the warranty period? Jack E/NJ

1 more replies
Relevance 67.65%

Furthermore explain, This problem occured when I put my laptop into sleep mode, I tried to turn it on but it wouldn't work so I remove every power sources and my laptop shut down. The moment when I try to power it back on, nothing happened except the power button light up other than that nothing else light up.My HDD is not running and so is my fan..Am I recommended send my laptop back to service centre? Thanks

Answer:Y410P power button light up but blank screen

Can you please try to reset the BIOS -1) Take out battery and disconnect all power sources.2) Press Power button for upto a minute.3) Connect all power and battery.4) Start the system. If nothing happens, then shutdown again. Press the NOVO button on side of the laptop and let me know what happens? If nothing happens, then (if you are comfortable), open the laptop and remove the HDD. Power up the laptop and let me know what happens. You can also try removing the RAM, if you have 2 sticks, could be that one of them is faulty. Just try booting with either one.

5 more replies
Relevance 67.65%

My computer will not start. The power status LED flashes for a short time but nothing else happens - no HDD, no fan, and no display. What do I do?I google and follow some ans but issue not solved, what do i do plz help

Answer:Laptop will not start only power button light flash

Welcome to the Lenovo Community !
 
Sorry to hear of your problem.  What model do you have ?
 
Try clearing the CMOS to see if that will resolve the start up problem.  Just do this....
1. Unplug the charger / adapter. 2. Remove the battery. (If your model has a removable battery, not an internal one)3. Press and hold the Power Button for 15 seconds. 4. Re-install the battery, plug in the charger / adapter if needed and power up the system to see if the problem was resolved.

9 more replies
Relevance 67.65%

when I press the power button it is not turning on just giving the amber light at the power buttontried the power drain and still it is the same

More replies
Relevance 67.65%

Hi! I have an Acer Aspire switch 10. About hours ago, I charged it, and after a hour or two I opened it and saw critical low battery thing, I tried charging it in different outlets in our house, but all I can see is an orange blinking light in it's power button, I know that it should be steady, Please help! I'm charging it for almost a day, and still the battery is low, sometimes a recovery thing pops out the screen.

More replies
Relevance 67.65%

Day before yesterday when I was trying to start my laptop, the light turned on-off continuously several times, and finally the power key light turned on but the screen was black.And yesterday the light turned on-off thrice. But after that every time I turned it, the power button light got on, but the screen was black.Present situation: On starting my laptop, the power key light is on, but the screen persists to be black, not getting on-off on it's own. I found one solution, of removing the battery as well as charger and pressing the power key for about 60 seconds. But it didn't help.Please suggest what might the problem be and solutions!!

More replies
Relevance 67.65%

Today I went to press the power button on my Dell vostro 220s intel pentium running windows vistaThe power button blinking a yellowish color while Sound beeps twice at a time. I just used this computer last night with no problems Please help me. I have the system open ready to explore.

Answer:Dell power button blinking yellowish light

That's Dells way of saying you need a new power supply.

3 more replies
Relevance 67.65%

Today I went to press the power button on my Dell vostro 220s intel pentium running windows vistaThe power button blinking a yellowish color while Sound beeps twice at a time. I just used this computer last night with no problems Please help me. I have the system open ready to explore.

More replies
Relevance 67.65%

My Dell GX300 won't power on. The power button light just blinks when it is plugged in. I tried booting from a floppy and from the OS disk but nothing happens.
Any suggestions would be greatly appreciated.

More replies
Relevance 67.65%

I recently upgraded Windows 7 to Windows 10. When I power down the system from the menu, my computer does not completely turn off. The procedure I use is described below:

Click Windows_Start_button > Power > Shutdown

The system closes applications and appears to initiate a shutdown procedure. Everything appears to be shut off, but my mouse is still lit up. I do notice that the fan stops and everything else appears to be completely shut down. When I was running Windows 7 before my upgrade, my system completely powered down.

I have a dual boot system with Linux, and when I power down from Linux, the shutdown is complete, so I don't think I accidentally did anything to the hardware or BIOS.

Has anyone else experienced this? I'm pretty sure there is some tweak in Windows 10 that would fix this, but I haven't found it yet. Thanks for any suggestions you might be able to offer.

Answer:Power down button does not completely turn computer power off

I found the solution on another thread. If you have this problem try the following:
1. Log in as an administrator.
2. Right click the Menu button.
3. Left click -> Control Panel > Power Options > Choose what the power button does > Change settings that are currently unavailable
4. Uncheck the box next to Turn on fast startup (recommended)
5. Make sure Hibernate is unchecked.
6. Left click Save changes.
The next time you shut down the computer, it will be completely powered off. At least this worked on my machine.

4 more replies
Relevance 67.65%

I recently upgraded Windows 7 to Windows 10. When I power down the system from the menu, my computer does not completely turn off. The procedure I use is described below:

Click Windows_Start_button > Power > Shutdown

The system closes applications and appears to initiate a shutdown procedure. Everything appears to be shut off, but my mouse is still lit up. I do notice that the fan stops and everything else appears to be completely shut down. When I was running Windows 7 before my upgrade, my system completely powered down.

I have a dual boot system with Linux, and when I power down from Linux, the shutdown is complete, so I don't think I accidentally did anything to the hardware or BIOS.

Has anyone else experienced this? I'm pretty sure there is some tweak in Windows 10 that would fix this, but I haven't found it yet. Thanks for any suggestions you might be able to offer.

Answer:Power down button does not completely turn computer power off

I found the solution on another thread. If you have this problem try the following:
1. Log in as an administrator.
2. Right click the Menu button.
3. Left click -> Control Panel > Power Options > Choose what the power button does > Change settings that are currently unavailable
4. Uncheck the box next to Turn on fast startup (recommended)
5. Make sure Hibernate is unchecked.
6. Left click Save changes.
The next time you shut down the computer, it will be completely powered off. At least this worked on my machine.

0 more replies
Relevance 67.65%

when i push the power button it does not light up. the computer starts but only the fan works (low at first then becomes loud)

More replies
Relevance 67.65%

The mic mute button lights up if the sound is muted. However, for the mic, there's no light, whether the mic is muted or not. Is there anybody else who sees the issue? Any solutions?

Answer:My lenovo sl510 mic mute and light button not working

i had this problem but i installed a new os and installed all the updates and drivers from lenovo's system update and i worked perfectly again(old windows:windows XP     new windows:windows 7) 

1 more replies
Relevance 67.24%

A few months ago I bought an Alienware X51 R3 from Dell. It worked fine, but occasionally had weird issues, despite being a new powerful gaming desktop.
But starting yesterday, I came back to find it seemingly shut down. The power light was on, but the screen was black and the system seemed to be sleeping. I touch the power button, and nothing happens. Clearly it was already shut down, but I never told it to do that, and only left it for a few minutes.
I tried to turn it back on, but now the system does not boot, or even try to. The fans don't power up, the lights don't even turn on. The only thing that comes on is the power light, but it's dim. I have never seen that behavior in a computer before.
So, I made sure to disconnect the power supply and hold the button for 20 seconds, to make sure the charge was drained. Still the system won't power on. I turned on the monitor, but it works fine. The system isn't even trying to power on.
After doing my own research into the growing list of problems with the X51 desktops, there's a particular issue with the graphics card that comes with certain versions.
The GeForce GTX 970 card in this desktop seems to be prone to stop working, at least that's what I've seen in the problems reported by other costumers that ran into the same set of problems. I don't know for sure if that's the problem here, but the brick for the power coord still shows its own light when plugged in. It seems to be working... Read more

Answer:Dim Power Light - Computer Won't Turn On

You'll probably get a better response if you re-post this in the Alienware Club forum. Be sure to mention the version of Windows.
en.community.dell.com/.../default.aspx

1 more replies
Relevance 67.24%

The power light flickers on sometimes when plugged in, but never stays on.

Answer:HP Pavilion 23 power light won't turn on

It is a AiO PC

2 more replies
Relevance 67.24%

Hi all, i just bought Lenovo YOGA 900 last two months in June 2016. The third time of use, the problem is arises today. The notebook won't turn on but the power button is on. I tried to press the button many times but it doesn't work. Anyone can give me some advice?  Thank you. 

More replies
Relevance 67.24%

I'm trying to help a friend with an HP PC that is fairly new - runs Win XP but don't know any other spec details.

The power supply's green light is on - but pressing the ON button does nothing... no noise, no fan no nothing. Is it that the power supply has gone out - even though the green light is on? Or is it the motherboard?

I could put in a new power supply for her but I hate to buy one then find out it's the motherboard.

All help is appreciated.

Thanks!
 

Answer:Power Supply light is on, but PC won't turn on

9 more replies
Relevance 67.24%

i have tried to power it up with power ac plugged in and without. on/off power button flashes white.
battery is inside "sealed" and may be difficult to access.
ran fine yesterday, shut down with 20% battery life.

if the ac plug is unplugged then i can get the led to turn off but once pushed, it ony flashes. no results

warranty is expired.
unit manufactured april 23 2015

i currently have it plugged in but no flashing light as i have not pushed the power button. im hoping that it will take a charge or correct itself with time.

what do you suggest? thank you

Answer:i have a lenovo edge 15 model80k9. led power light is blinking but computer will not repond. no power up . the battery is "s

Try the following...

1. Take out (or take it off) the charger.
2. Next take out the battery
3. Now hold down power button for 20 seconds and then rinsert battery.
4. Now put it on the charger again

NOTE: Make sure charger is plugged into the main power supply (not an extension cord, surge protector, etc.)

Sometimes, when the device is not plugged in directly, it doesn't get the power it needs. Holding the power button, while you restart it, clears out the temporary ram (no it won't delete anything you have saved) and will give the device access to the ram it needs.

1 more replies
Relevance 67.24%

Hello,I have the 14" Yoga Pro 2. I've been getting messages saying the power adapter isn't supplying enough power and yesterday it died while plugged in. I haven't been able to turn it back on. Also, the power indicator light stays on, plugged in or not.Has anyone else ran into the same issue? I tried unplugging the battery and turning it on while plugged in, still no luck.Thanks in advance. Edit: found a solution in a post below. Unplug the batteryUnplug the CMOS battery then plug it back inPower on the laptop from the adapter only, then shut downPlug battery back in  Worked perfectly.

More replies
Relevance 67.24%

Hi, is there a way to turn off or disable the webcam light when I am using it?Thank you

More replies
Relevance 66.83%

I have a dell t3400 (core duo e8400, 4gb Ram...) which was powered by the oem psu, but I changed it to a corsair vs450 so I could power my gpu. Two months later, after taking the gpu and psu to another pc, I put the oem psu back into the dell, and tried to power on, but there is a blinking orange light in the power button. I doubt it is a mobo problem, because it was working today. Any ideas?

Answer:Dell T3400 orange blinking light in power button

Blinking Amber power button is Bad Power supply.   Solid Amber power button is Dead motherboard.  T3400 with X38 Express Chipset 
525W Active Power Factor Correction (APFC) power supply.
M1J3H, 7JVXX, D525AF-01
PSU may be bad or USB Ports may be damaged creating a short on a main power rail. (PS_ON asserted, PS_PWRGOOD not asserted)

 
 

1 more replies
Relevance 66.83%

We bought around 40 of these X220 I5 before xmas and now more than 20 of them have failed. The company we bought them from tried everything but they ended up switching the mainboard on the first two that failed.We were told it was a batch issue with the serial number R9-HNXXX and now all of those are changed into T420. But today we had the same problem with serial number R9-HXXXX that was bought two weeks earlier and with different config - I7 and SSD. All of them with the same problem that is described in subject. Are there any known batch issues? The problem is not with the tablet version and sorry for posting in the wrong forum. Thx













Solved!

Go to Solution.

Answer:X220 - no post and green light around power button flashes every 3 - 4 second

I was preparing a X220 for a VP in my office and i left on vacation. When i came back, the laptop was dead and i can't power it on. I unplugged the AC and removed the battery and waited a bit, plugged everything in again and still the same thing. The battery LED blinks 3 times then nada. (no fans, nothing) I tried a little trick from the S model, removed AC and battery and pressed power button for 30secs and re-plugged everything but it didn't work. Anyone have any ideas?

9 more replies
Relevance 66.83%

I have a Satellite P755-103. I upgraded the BIOS from version 2.6 to version 2.7 (file bios-20121002102409.zip) dated 17-09-2012. Since then, I noticed the light in the power button started to act randomly. It usually is on, sometimes it dims, sometimes it goes off, sometimes it blinks. I could not find any apparent reason for it. It also happens during the BIOS pre-boot phase, working on battery and working with the power supply on.

Any advice?

Thanks,
Paulo Pereira, Portugal

Answer:Satellite P755-103 power button light blinking randomly

Hi

Are you sure you are talking about power LED indicator and not HDD indicator.

The first from left is the DC indicator and it glows white when power is being correctly supplied from AC adaptor.

The 2nd from left is power indicator and it glows white when the computer is turned on.
But if you turn off the unit and goes into sleep mode, this led flashes amber.

The 3rd is battery indicator.

The 4th from left is HDD / CD/DVD drive indicator and it blinks whenever the notebook is accessing the HDD or reads from disk

7 more replies
Relevance 66.83%

Hi guys well I just hope someone with some electronics knowledge in repairing notebooks would help me out in here.
I got a sager 5680 lappy, and when I plug the lap on AC power without the battery I turn on the unit and instantly goes off, ( I hear a low sparky noise like some sort of short circuit, when this happens the psu light dimms from rock solid ) .
Now if you leave the unit with the battery charging you may be lucky and the battery will charge and the only way the unit works is with the battery on it's bay, as soon as you remove the battery boom unit shuts off.

The Unit does work but only when you plug in a battery and when it charges if you leave it dunno a couple of nights never gets solid green

What I did :
==================

- Could the PSU be bad not throwing enough amps ? even if it shows voltage
on digital meter

- This lap has a separate voltage daughtercard for the battery I removed it when diagnosing this card goes
plugged onto the mainboard and here the battery gets plugged.

- Measured PSU voltage it's working fine 20volts DC

- Checked SMD fuse on motherboard , fine

- Dissasembled the entire unit ripped everything off that might me faulty

- I've read the AC plug sometimes get's broken and I retouched the solder points, once I did this, by miracle the unit started without the battery plugged on. But guess what after I assembled the unit then again , when on AC power alone turned on , and then went off . So I don�... Read more

Answer:laptop not starting on AC , power light on , I press on button & goes off instantly

The power adapters and the power sockets have an extremely high failure rate in the Sager 5680 laptop. We have seen eight of them in our shop with identical symptoms. While still under warranty, Sager replaced those without a question.

The problem appears to be where the power meets the motherboard. New parts would need to be re-soldered into the system... expensive because it is very time consuming.

Sorry I don't have a solution for you. Working units are available on eBay, if you want to trace the problem between a working model and a failed one.
 

12 more replies
Relevance 66.83%

Hi can someone tell me why power button lights up in 2 different colours blue and orange every thing seems ok best to be sure
Thanks in advance

Answer:Satellite A60 power button light in 2 colors; blue & orange

This happens if your notebook is in stand by mode.

6 more replies
Relevance 66.83%

I have a Dell Latitude E5250. When plugging in the AC adapter the only light that comes on is the power button light and it's blinking continuously. The other indicator lights are off. The system board has been replaced, no change. After the system board was replaced the battery indicator light came on and the battery charged, though the laptop would not power on when the power button was pressed. It would light up then go out.  I've removed the battery and AC adapter, held down the power button to discharge flea power, no change. Followed Dell TechDirect directions to remove the battery and CMOS battery, then insert the AC adapter and power on the laptop, no change. I've tried known good RAM. I've removed all components including the LCD cable, no change. When the AC adapter is installed the power button light blinks continuously, no pattern, no other indicator lights come on. Any thoughts? I'm wondering if it's a video issue, bad Touch LCD?
Thanks.

More replies
Relevance 66.83%

My fiancée's HP G62 laptop suddenly stopped booting. More specifically, when you press the power button, the power light comes on, but the screen stays totally black. I tried doing a hard reset on it (unplug, remove the battery, and hold power button down for 60 seconds), but that didn't work.  I tried this multiple times with no success. I shined a flashlight on the screen to see if there was a faint image (indicating a backlight problem), but there is no image at all. I tried connecting the computer to an external monitor, and that didn't work either.   Recently I had to replace the fan and the power button assembly on this machine, but it was working fine after that until now. 

More replies
Relevance 66.83%

I have a dell dimension 8100 that has been powerleaped from a 1.7 to a 2.5.  I recently upgraded the RAM from 256 PC 800 RDRam to 512.  I also have upgraded from a GEForce 2 Ultra to a GEForce 4 Ti4600 quite a while back.  Everything has been working great until the last week or so and I am at a loss here.  I used to leave my computer on all the time 24/7 with reboots here and there when I needed to.  Well, after I lost the fan on my Video card I started to turn it off.  After about six months of this it decided that it doesn't like to boot up after a night or two of being off.  What happens is when I push the power button you can hear it power on but the monitor says there is no signal being sent from the computer.  The other weird thing is that the power button light is amber instead of green.  I turned off the computer and unplugged all power from it and tried again.  This time it booted up.  The last time it happened, unplugging it didn't even work so I pulled the case apart and cleaned it out.  I yanked the Video card out of the AGP slot and reseated it and turned it on and presto it fired right up.  What gets me is when I leave it on and have to reboot it, everything works fine.  It only acts up when I leave it off over night or longer and then start it.  Could this be the battery on the motherboard?  My clock doesn't seem to be losing time in windows or anything.  If a... Read more

Answer:Dimension 8100 not booting up and has amber light on power button. Please HELP?

If the power button is blinking amber, it is probable that the power supply needs to be replaced.If the power button is solid amber, the power supply should be fine. At this stage of bootup, memory has not yet been tested, and is not a factor in this type of failure. Check the CPU and ensure that it is properly seated.

4 more replies
Relevance 66.83%

I have an Inspiron 3650 i3 desktop pc that is a few years old and seldom used. When not in use it is in sleep mode.
Yesterday i tried taking it out of sleep mode, with no luck, and noticed the power button light was solid orange. After a few tries I hard reset the pc and it would not boot up completely. The fans come on and the harddrive sounds like its working but i get no video and the power button remained solid orange. After troubleshooting from several forums i ended up disconnecting everything from the motherboard and taking out the battery then after replacing it and trying to boot with just the cpu fan plugged in. same result, solid orange power button. The PSU seems to be working fine after troubleshooting it so im thinking its either the processor or mobo that has gone bad. Any suggestions?

More replies
Relevance 66.83%

Power button LED light is not lighting up on DELL Inspiron 5559. Is it normal?

Answer:Power button LED light not lighting up on DELL Inspiron 5559

 Good question.  I have the same problem with my 4 month old 5559.  The description in the reference guide says "Indicates the power and battery?charge status.  Press Fn+H to toggle this light between hard?drive activity light and battery?status light."  If I press Fn+H, sure enough it shows hard drive activity.    Confession time:  I never saw this in the documentation until I looked it up to reply to your question today!  I never knew I had a disk activity light - man, I'm glad to have found this!  :-)

2 more replies
Relevance 66.83%

Went to turn on my Lenovo Ideapad Y410p laptop and nothing happened! No led lights with power source on and battery in. When I used it two days ago, I ran AVG and spy-bot and everything was fine. Used it a little bit and turned it off. Now nothing??? Did the power/battery disconnect with holding power button for 30 seconds... nothing. Both batteries 9 cell and 6 cell had full charge, tried my other Lenovo charger... no go. A surge couldn't have happened as the laptop is plugged into same strip as my other lenovo laptop is and that one is working fine.





Lenovo Ideapad Y410p - Intel Core i7 4700MQ - DDR3 16GB Memory - Samsung 850 EVO 500GB 2.5" SATA III SSD +24G SSD - 1TB HDD SATA II HDD via Ultrabay - DVDRW via Ultrabay - Single/SLI Nvidia 750M + Intel 4600 HD - 9 cell 7800mAh battery - Windows 10 Pro x64









Solved!

Go to Solution.

Answer:Lenovo Ideapad Y410p won't power on... No power light?

Hi jack61 , 
 
 
Greetings. 
 
We now know, power drain failed. No LED error codes , No beep codes
No activity lights even with battery charging led.
Not turning on even with known good charged batteries. 
No power even with known good ac adapter.
 
What we can try:
Try plugging it directly on the wall and press novo key (number 1 page 7) to turn it on instead. 
Check if the power port shows any signs of burnt / damage / looseness . 
Press Novo key using a charged battery. 
Remove battery, harddrive , memory and other accessories and plug directly with a known working adapter and or with a charged battery ( it should at least beep). 
 
If all fails , you can have it checked for the motherboard issue with a technician (checking on the internals /cleaning or reseating parts connected to the board / applying thermal paste (for processor isolation) / checking on dc in board and port).
 
You can check for your warranty here and call in tech support for service. 
 
 
Regards

9 more replies
Relevance 66.83%

I have to unplug the PC power cord and plug it back it to get the PC to boot.  It's like it goes to sleep and will not wake up.  Please help! Thank you, Mike

More replies
Relevance 66.83%

i have tried to turn on my laptop and there is an amber light where the green power light should be and it wont even power up what could this be

Answer:Satellite does not turn on - power light blinks

Hi

What notebook do you use?!!!

Seems the notebook provides a blinking code. This means that a hardware error was detected.
Usually the short blinking means 0 and long means 1.
The authorised service technician should be able to read such code and to locate the hardware malfunction.

Mostly it?s something wrong on the motherboard!
So I don?t think that you will be able to fix it. That?s not possible if you have no experience and the right tools and parts.

So in my opinion you should contact the ASP in your country for an help!

Good luck

1 more replies