Computer Support Forum

Broadcom Crystal HD for S10-3

Question: Broadcom Crystal HD for S10-3

I see people can install the accelerator on a s10-3t but what about the s10-3 what are our options as i tried the 70015 and it didn't work/recognize it

Relevance 100%
Preferred Solution: Broadcom Crystal HD for S10-3

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Broadcom Crystal HD for S10-3

BCM970015 is what i tried in the 2nd slot

4 more replies
Relevance 71.75%

Hi.

Looking at buying one of the NB305 netbooks but wanted to check if there's anyway these can play H.264 encoded mkv files. I know the pinetrail cpu would probably struggle, but I've read that the broadcom crystal hd card can get around this issue. Would the the NB305 cope with this card as it requires a spare PCIe slot? Guessing there's no option of buying the card with the netbook like you can do with the dell mini 10 and hp mini 311?

Cheers.

Message was edited by: pompeypirate

Answer:NB 305 & broadcom crystal hd card

Hi mate

I don?t see any reasons why you should not be able to watch and play H.264 encoded mkv files.
The files might be a little bit bigger due to the high definition resolution but and simply VLC player (small tool for free) should be able to play such file?

> Would the the NB305 cope with this card as it requires a spare PCIe slot?
?.No?. you cannot insert, upgrade this notebook with any additional PCI cards?
This is not possible.

3 more replies
Relevance 71.75%

please help!!!!!!where to find a modified BIOS for the C10-3, which has support BM70012??

Answer:BROADCOM BCM70012 CRYSTAL HD ON S10-3

Hi
 
Welcome To Lenovo Community
 
 
Please find the bios update link
 
http://download.lenovo.com/UserFiles/Driver/en/Downloads%20and%20Drivers/S10-3/2ACN37WW.txt
 
Hope This Helps
Cheers!!!
 
 
 
_______________________________________________________________________________________________
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
 
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!  This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
 
Follow @LenovoForums on Twitter!

1 more replies
Relevance 71.75%

hi there. just purchased a s10e and im wondering if this card will work.http://www.ebay.com.au/itm/190573260699?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649or hopefully (cheaper) this onehttp://www.ebay.com.au/itm/300652294807?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649if anyone has had success with either of these 2 cards i'd like to hear about itie has it made any difference to watching youtube or avi files ?thanks in advancebenjamin PS im running ubuntu and macpup linuxalthough im still interested about how it runs on windows

Answer:broadcom crystal hd card

I have topic regarding S10-3t and the Broadcom card. http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/S10-3t-Tweaking-Blog/td-p/682965 Hope it helps. In short you can use the card with most software avaiable. Media Player classic, Windows Media player/center, ProgDVB for TV tuner viewing, or XMBC. 





Lenovo S10-3t:Atom N550, 2gb Ram, OCZ Vertex 2E 180G, Avermedia A316, Broadcom Crystal HD, Samsung Blu-Ray USB drive, Edimax Wifi EW-7811Un.

1 more replies
Relevance 70.93%

I have an AzureWave AW-VD920 HD Video Decoder mini PCIe card. It has a Broadcom BCM70015 chip on it. http://www.broadcom.com/products/Consumer-Electronics/Netbook-and-Nettop-Solutions/BCM70015 I cannot get it to work in my X220 laptop. There's an available mini PCIe slot but Windows 7 x64 doesn't detect it. For some reason, the card works in my other ThinkPad laptop, which is an X201 but not in X220. I inserted the card in the Wi-Fi slot but the BIOS halted with an "Unauthorized network card..." message. I know the available mini PCIe slot works because I successfully installed an SSD in the same slot. I also know the Broadcom card works since my X201 recognized it. Not that it matters, but the BIOS on the X220 is current (version 1.39). I welcome any feedback. Thank you in advance.

Answer:Broadcom Crystal HD on X220 Laptop

Definitely this card utilizes pci-e bus lines so it can't work witin wwan mini pci-e/msata slot.wlan slot has usb and mini pci-e bus lines. In your case the cause of issue is white list of approved wireless cards stored within the BIOS. That's the cause of error message you're facing with. So I hope you know the solution regarding the BIOS.

8 more replies
Relevance 70.93%

Hi, this is my first Post - but I have been lurking the board since I bought my S10-3t a month ago. This is my second tablet, the first being an Acer C110, circa several years ago. I am excited by the potential for this new tablet as it certainly beats my old companion in all features and capabilities - most of all in battery life (8 cell). However, the potential comes at a price and effort. I have done nearly everything I intend to do to improve the basic device: 2 GB memory, 500 GB hard drive, fresh install of Windows 7 Pro without all the Lenovo bloatware... and the tablet performs quite well. Even the Microsoft Tablet Pack works pretty well. [Thanks to Jesse B. Andersen and his http://www.lenovos103t.com/ - GOOD WORK] However, one of my principal uses of will be playing video - and this is where I find it is still lacking. In particular, I am trying to play my collection of HD mkv files. My player of choice is Zoom Player and I have installed the best and most efficient codecs. Even with the Haali splitter and Cyberlink codecs installed, and the processor set to maximum performance, the playback is choppy with occasional audio sync issues. So I come to my next performance hurdle. I have purchased a UCI BCM970012 that I have attempted to run from the second PCI slot. As expected, the BIOS refuses to boot the unapproved card. SO, my question to the community is has anyone had success running this card in the S10-3t ?? I see where peop... Read more

Answer:Broadcom Crystal HD - BCM970012 any success with S10-3t ???

Are you sure it's a bios problem and not that the socket is the wrong type? As I understand it a mini pci socket can be either pci or usb, the broadcom HD card needs it to be pci.  If you have a socket used by the wifi card it might be worth trying the HD card in theat to see if it's any better. My Intel S12 accepts the HD card and even lets you install the drivers, but cannot access it (that is definately a bios/intel chipset  problem)

9 more replies
Relevance 70.11%

Hello All, Was just wondering if anyone has tried the Broadcom Crystal HD viewer for their ideapads? I would to know if there are any issues and performance. Perfomance wise my guess is that it will have smooth 1080 playback as netbooks equipped with this can do it. thanks!!

More replies
Relevance 69.29%

I am using Idea Pad S10-3s, and same as most of the user, I want the computer to play 1080 movie smoothly, so I bought a Broadcom crystal HD BCM 70012.  However, after installed in the netbook in the PCI-e slot, it cannot detect the decoder.  Can anyone have any workable suggestion? I know that there is a thread for S10-3t here (http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/Broadcom-Crystal-HD-BCM970012-any-success-with...), but it is too difficult for me to update the bios.  Besides, I am not sure if 3s and 3t has any difference and therefore I am not dare to update it.  Is there any easiler method or alternative products that can have the same fuction and easiler installation? Thank you very much.

Answer:Broadcom crystal HD BCM 70012 - Idea Pad S10-3s cannot find the new hardware. Help!!

It does not work with the S10-3.

2 more replies
Relevance 69.29%

Looks like this guy figured out how to install the Crystal Broadcom decoder and WIFI card internally into the S10-3! Worth getting?? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230623153884

More replies
Relevance 68.88%

I was able to install the Broadcom Crystal HD card  and a new WIFI card INTERNALLY at the same time.  This is how: You will need to buy:BCM70015 Broadcom Crystal HD pci-e card (must be this model number)  http://shop.ebay.com/?_from=R40&_trksid=p5197.m570.l1313&_nkw=BCM70015+&_sacat=See-All-Categorieshttp://img585.imageshack.us/i/kgrhqiokjie0bgvlg2jbnzv.jpg/ AND Q802XKG   802.11 b/g Wireless Lan PCI-E http://www.mini-box.com/802-11-b-g-Wireless-Lan-PCI-Ehttp://www.mini-box.com/core/media/media.nl?id=15564&c=ACCT127230&h=99bdc5344ca0483734a6   1) Remove the original WIFI card from the pci-e slot and store in a safe place2) Remove the spacer metal plate from the BCM70015 Broadcom Crystal HD pci-e card3) Place the BCM70015 Broadcom Crystal HD pci-e card where the original WIFI card was4) Take the antennae connector shield off from the auxilary antennae and place them over the primary antennaes connectors to protect the circuits.5) In the empty PCI-E slot [the trick is this isn't a PCI-E slot but rather a USB slot which is why the new WIFI card works but the stock wifi does not] install the new Q802XKG   802.11 b/g Wireless Lan PCI-E card in the slot and connect the auxilary antennaes. After that you are done,boot up and install the drivers and enjoy!.     - I wish the postings on this forum were more organized as it was confusing understanding which posts meant s10-... Read more

Answer:Broadcom Crystal HD & WIFI card both working internally on Lenovo S10-3

Did you need to hack the bios? Edit (Apr 5, 2011): No bios changes required.

2 more replies
Relevance 52.89%

I have the Acer Aspire Notebook 5734Z-4725. I have had the black screen with the USB sound going off. I've been getting a pop up saying I can use a faster port but close it because I don't know about ports and don't want to screw up my computer and the pop up notice saying the camera is in use. I have deinstalled/reinstalled the driver. I have also done a system restore on the computer which set it back to factory settings that didn't work. As far as I can tell it is the same driver. Sometimes it seems to be working fine like the video will work but this is very rare and if I move my computer it puts my webcam back to a black screen. My webcam doesn't work with skype, ooVoo, msn, yahoo nothing.please help i'm so tired of it not working it has been like this over a month i have been on the internet for hours looking for a solution.

Answer:Acer Crystal Eye Crystal webcam isn't working

Do you have a recovery option to reinstall the driver. Note : This image is on a Sony Vaio laptop but more likely similar.Make sure you choose the similar feature if available and not use the restore to factory default as shown.

1 more replies
Relevance 50.43%

I have been struggling with my both dell machines. Both have Broadcom cards. These cards have similar problems with my router for the past few days. what wireless cards do you have?
 

Answer:broadcom 1390, broadcom 1370 dell wireless

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Note: You will need to post complete details of your configuration and your specific issue in this new thread for us to help you.

Thanks for your cooperation.
 

1 more replies
Relevance 47.97%

Hope that some one can help me I have 4 workstations running XP SP2.
When I run the install it stops at the updating component registration
screen. Internal error 2908 is the first screen i get. I hit OK and get the
next screen which reads error 1935 a error occured during the installation of assembly CrystalDecisions.Enterprise.Desktop.Rtf versions=11.0.3300.0 Culture=neatral PublickeyToken=692fbea5521e1304 Please refer to Help and Support for more info HRESULT:0x8002802f. Any ideas would be appreciated.

Thanks
 

Answer:Crystal Reports Runtime install errors - Crystal Reports 9

you need to give us more details. what program are you installing?

check this out: http://support.microsoft.com/?kbid=299777
 

2 more replies
Relevance 46.33%

Cant find this driver and I am servicing about 90 computers. I sometimes have to reinstall windows because of software issues and need this driver.  

More replies
Relevance 37.72%
Question: crystal

Does anyone know about "Advanced Registry Optimizer"? I want to opt out but am getting warnings from Yahoo. The deal was that if I purchased from one of their sponsors I would be able to download their program. I can't even contact them. HELP PLEASE
 

Answer:crystal

Welcome to MG's.....you should post this question in the software section..however, it is a ahreware download HERE

Are you trying to get your money back or uninstall it?
 

6 more replies
Relevance 37.72%
Question: crystal eye

Hi, I'm looking for a driver for Acer Crystal Eye HD webcam: I tried with this:http://global-download.acer.com/GDFiles/Application/Camera/Camera_Cyberlink_1.5.2624.00_W7x86W7x64_A... without success..some one can help me?Thanks 

Answer:crystal eye

If you are trying to install a driver for our Webcam, it is recommended to download the one for your specific system. This can be done by visiting www.acer.com, choose your region, click on Support, then select Drivers and Manuals. Once there, search your model and see if the webcam driver is available.
 
The other option is using the built-in recovery software and loading the driver from there. If the problem persists, contact technical support in your region.





Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.

1 more replies
Relevance 37.72%
Question: LG crystal.

Ever since i got this phone, it was connecting to my computer great with no problems at all! But ever since i updated new version of pc suit 3 i cannot connect any more. Just wont recognize the LG usb modem driver. And yes ive tried installing the driver again but comes up with a fail installing.

I also updated that lastest windows 7 files.

So any suggestions? thanks.
 

More replies
Relevance 37.72%

Hi, I am wanting to get a fan for my GF2 Ultra(to OC of course). I was wondering, do I get the new 'Orb' fan(the Crystal Orb) or some other 50mm fan. I can buy something like a 50mm, P3 cooler w/heatsink and fan or just a 50mm fan. Will the copper base and nickel plating really help? What do i get, the C-Orb or some other 50mm fan?
Thx ^_^

Addition of February 28, 2002 00:45:

Poll:
=--=--=
Which CPU=better?
<P4>
<XP>
 

Answer:P3 Fan or Crystal Orb

Here's my Cooling Resources:
http://www.plycon.com/
http://www.coolerguys.com/index.shtml
http://1coolpc.com/home/
http://www.cpufx.com/
http://www.pcmods.com/
 

15 more replies
Relevance 37.31%
Question: crystal report 7

can crystal report 7 work with Access Xp ?
 

Answer:crystal report 7

Hiya and welcome

According to here, its not, but 8.5 is:

http://www.experts-exchange.com/Databases/Crystal_Reports/Q_20328203.html

Regards

eddie
 

1 more replies
Relevance 37.31%

Hi All,

Let me preface by saying that I hate writing reports!

Anyway, I've been asked to write a report similar to this:



Where the vendors supplying selected parts are shown with their respective pricing. I need to filter this further so that only the PREFERRED vendor is shown for each part.

On the back end, my tables are linked as per this:



Each are equal joins. The PART table, far right, has the Part IDs, and the preferred vendor ID, but to link to the VENDOR_QUOTE table, it has to be linked through the VENDOR_PART table, which has both the Vendor Part ID, and our own internal ones.

I've tried specifying that the VENDOR_QUOTE.VENDOR_ID must equal the PART.PREF_VENDOR_ID, but that filters out EVERYTHING, despite the IDs matching.

Can anyone advise how I can accomplish this?

Thanks Much,

Milty
 

Answer:Crystal Reports Help

Nevermind! I figured it out. Used the PART.PREF_VENDOR_ID as a group instead of the VENDOR_QUOTE.VENDOR_ID
 

1 more replies
Relevance 37.31%
Question: Crystal Reports

I was wondering if anyone here could help me with an issue that I have running Crystal Reports. I am currently running version 5.0 I think, and the big issue that I have is that every time that I create any type of report, once I export it out to Excel it is double spaced. I have tried everything that I know how to do in order to rectify this but I have had no luck. If anyone here can lead me down the right path I would greatly appreciate it. Thanks
 

Answer:Crystal Reports

CLOSING DUPLICATE view this thread
http://forums.techguy.org/showthread.php?threadid=85032&highlight=Crystal+Reports
 

1 more replies
Relevance 37.31%
Question: crystal reports

Hi guys,
I m using SQL server and crystal reports. I need to know how to do a table lookup in crystal reports..please hurry this is driving me nuts!
 

Answer:crystal reports

I believe crystal reports uses standard SQL language....SELECT fieldname FROM tablename WHERE whatever SORT BY fieldname
 

1 more replies
Relevance 37.31%
Question: Crystal Report

hi friends
i am using Access(office xp/2000) as backhand to VB.i'm facing a problem after i install the package.
As i run the s/w and try to see the Report(Crystal report 4.5) it gives me a error "run time error '20534' error detected by database DLL ". and the program stop executing.
i've tried to convert the database to a prior version and then it's working but as soon as i give password to the database it again starts giving error that somebody is already using the database or not a valid password.
Is it necessary to have vb/visual studio installed on the PC on which i'm loading the project.
pls. see to the problem and send the solution ASAP.it's really urgent.
u can also mail me at [email protected] or [email protected]
thanks
 

More replies
Relevance 37.31%
Question: Crystal security

I would like to ask if it is recommended to have crystal security as a compliment to an existing antivirus or anti malware solution?

Answer:Crystal security

Crystal Security is a cloud-based anti-malware solution designed to supplement your anti-virus program.BetaNews: About Crystal SecurityI have never used Crystal Security, nor do I know anyone who has so I cannot provide an opinion as to how effective it would be in comparison to recommended programs like Malwarebytes Anti-Malware.

3 more replies
Relevance 37.31%
Question: Crystal Reports

I have created a report, from data from another system.
In this report, I have a start time, a finish time and a total time.
The original report worked out the total time to a . something of an hour eg, if start time was 7.44 and finish time was 7.50, the time taken would show as .10, instead of .06 (minutes)
I have now done a formula to get the report to show minutes, which is fine as long as the time taken is no longer than 60mins.
1hour 57mins is showing up as 1.14 (114 minutes). Is there anyone who knows how I can get it to read 1:57?

Rob
 

Answer:Crystal Reports

6 more replies
Relevance 37.31%
Question: Crystal Reports ?

Hello there...
Can anyone assist me with a crystal report 6.0 question?

Ive got a report created and want to only display one entry for a specific record.

----------------------
Example:
Contact Report

Accnt Rep Contact Address
123 ARL Mr. Smith 123 Anywhere
123 ARL Mr. Jones 123 Anywhere

456 JBM Mr. Kile 456 Who knows
-------------------------

So - I dont want multiple contacts (Mr. Jones) to show for the same account - just the Primary. Any ideas?

 

Answer:Crystal Reports ?

Is that in use with the program TrackIt?
 

2 more replies
Relevance 37.31%

From a new Crystal Reports user. I am using Crystal reports 6 with Visual Basic 6 and I cant work out how to pass a NULL parameter to the Stored procedure that the report relies on. Could someone please help me out here as this is driving me mad. Also is it possible to link a report to an ADO recordset instead of having the report linked to the stored procedure. Thanks in advance.
 

More replies
Relevance 37.31%
Question: Crystal Reports

I have created a Crystal Report in Maximizer and the report works beautifully however included in the report are only about 30 of the 68 records. I have tried all the options including specifying "Generate report using entire address book" but the report still does not include all the entries. Any suggestions would be much appreciated.
 

More replies
Relevance 37.31%

hey my computer has been formatted and after is process my web cam stop working
what should i do to get my web cam operational again
the cams name was Crystal Eye so help me to remedy this problem plz
 

Answer:Crystal Eye Web cam, Acer

Go to Acer support website...enter your model and download the driver for it...install and restart PC.

http://support.acer-euro.com/drivers/downloads.html
 

2 more replies
Relevance 37.31%

I have a Acer 4810tz

When I open the camera it says:

Camera Not found.

I reinstalled windows vista

I installed the Acer Crystal eye software but the sign still comes up??

Please help.

Answer:Crystal Eye Software

Did you reboot after you installed the driver?

And, it has the same error message, right?

5 more replies
Relevance 37.31%
Question: Crystal Reports

Ok this may or may not be an easy one to answer, but any help would be appreciated.

Situation
Using MS Visual Studio 2005 (Visual Basic .NET)
I created a simple app, added a dataset and a tableadapter linked it to an MS Access Database via the ODBC and then to a table which contains 2 fields 1 number and 1 string. I then added the Crystal report viewer to form 1, then I right clicked on the CRV component and selected create new report. Here are the steps:
1. used the default name CrystalReport1.rpt
2. Using report wizard & standard
3. Selected Items Project Data->ADO.NET DataSets->MyApp.DataSet1->Table
4. Added all fields to display
5. Finish

now that every thing is ready compile and run the app.
I get a header but nothing else. Any idea's this is driving me nuts. and I have to do it this way as I have a project that requires reports.
 

More replies
Relevance 37.31%

I need to create reports online on the fly using meta-data.

I have dataset and blank report. How can I create report design on the fly ? so that it will able to display report dataset.

Can someone tell me it is possible or not ? or some reference links.....
 

Answer:Crystal Reports on the fly

I do a lot of reporting and I know that CR works fine with predefined data sets.
Our helpdesk tool comes with a runtime version of CR and a series of standard reports.
each blank report is 'fed' by variables and therfore flexible.
I don't know how this all works but I do know that you can invoke a report and automatically have it link to the data set.

So if the dataset is up-to-date the report will show tha data from that data set.
So if you can update that data set on-the-fly and hae it trigger your report I think you'll be on the way.

Like I said, I have no experience with it but this is just a tip.

I have attached one of the template reports, I don't have the data but maybe it will help you think something up
 

1 more replies
Relevance 37.31%
Question: Crystal Reports

I am trying to teach myself Crystal Report. Can anyone tell me about a good book?
 

More replies
Relevance 37.31%
Question: Crystal Chronicles

is FF Crystal Chronicles that bad? I'd buy it anyway just cos it's FF but I want a fresh opinion from actual hard core players
 

Answer:Crystal Chronicles

If you were the true FF fan that you mentioned in the other thread, you wouldn't be asking the question I'm getting it regardless. Looks neat though
 

1 more replies
Relevance 37.31%
Question: Crystal Reports

I'm having trouble with a report in Crystal Reports. Can anyone recommend any help sites. The Crystal site seems a bit complicated.

Cheers

Rob
 

More replies
Relevance 37.31%
Question: Crystal Report

How can I display only last record in crystal report using crystal formula.All records coming from a database.

More replies
Relevance 37.31%
Question: Crystal Reports???

I am using a proprietary banking software which uses Crystal reports, and I am running it on a Windows 2000 Professional computer (128MB memory, 17GB HD, and an 800MHz processor). Whenever I try to print from the program (any type of network printer - Have not been able to test it with a local printer because one is not available), it locks up and I get a Windows error saying "The Win16 subsytem may be unstable. Press Ok to terminate the Win16 subsystem or press cancel to leave it running". From there I need to close the application. I have contacted the makers of the software and basically they have no answer, all they say is that it is a problem with printing from Crystal reports. I know nothing about Crystal reports.... Does anyone have any ideas on what could be the problem. I have tried basically everything from re-installing the software to updating print drivers. I can print fine from any other application on that computer. There are also two other people who use this application and they print fine (one running W2k and the other W98). Just up until recently it printed fine. Any suggestions would be greatly appreciated.
 

Answer:Crystal Reports???

9 more replies
Relevance 37.31%
Question: Crystal Reports

I need only pull the last 5 digits of a phone number. The format is ###/###-####. I need to pull the last 5 digits in the following format #####. What function will give me the results I need?
 

Answer:Crystal Reports

9 more replies
Relevance 37.31%
Question: Crystal Reports

I'm new to Crystal Reports. Need help...Trying to create a report that will give me employees with birthdates for certain months, i.e. a report that will print out all employees with February birthdays. Can anyone help on formulas, parameters, etc???
 

Answer:Crystal Reports

Hiya and welcome

You may want to check this out:

http://support.crystaldecisions.com/communityCS/TechnicalPapers/cr_sample_rpts_desc.pdf

It has various samples which you can download, that may help.

Also, have a look at this, for some guidence:

http://support.crystaldecisions.com/library/kbase/articles/c2001775.asp

Which version are you using?

Regards

eddie
 

2 more replies
Relevance 37.31%

Hey There...

Does anybody know of a good site to get started on using Crystal Reports?

Thanks in advance...


$
 

Answer:Crystal Reports Help

Don't know how good they are but you could start here:
http://www.tutorialfind.com/tutorials/software/
 

2 more replies
Relevance 37.31%
Relevance 37.31%
Question: Crystal Reports

I am new to Crystal Reports and have spent nearly a week doing what I thought should have been a simple report... I could really use some help.

I was able to get the report done using the SQL QUERY capability of Crystal. The default matrix report was perfect. But when I tried to get Crystal Reports to "format" the report (asking Crystal to use the .qry file), it messed up because two columns of the report have the same fieldname (they come from different instances of the same table) and Crystal thought I wanted the same field data printed in two different places on my report.

Here's my situation (bear with me):

INVOICES (fields: INVOICE_NO, BUYER_KEY, SELLER_KEY, DATE)
PEOPLE (fields: PEOPLE_KEY, NAME_KEY)
NAMES (fields: NAME_KEY, NAME_FIELD)

The PEOPLE_KEY links to BUYER_KEY (1 to many)
The PEOPLE_KEY links to SELLER_KEY (1 to many)
The NAME_KEY in PEOPLE links to the NAME_KEY in NAMES (1 to 1)
In the SQL Query, the PEOPLE table has an Alias (PEOPLE_1) and the NAMES table has an Alias (NAMES_1) so that I can uniquely identity BUYERS and SELLERS.

Selection Criteria (here's where I've had trouble)
Select <b>ONLY</b> the SELLERS who appeared on invoices between DATE1 and DATE2; but only if those SELLERS had never previously appeared in the table (in other words, there are no invoices PRIOR TO DATE1 where the particular SELLER_KEY exists)

Once the SELLERS are identified, select only the FIRST invoice generated between DATE1 and DATE2 ... Read more

More replies
Relevance 37.31%

private void display(string month)
{
ReportDocument customerReport;
customerReport = new ReportDocument();

customerReport = new ReportDocument();
string reportPath = Server.MapPath("CrystalReport.rpt");
customerReport.Load(reportPath);

System.Data.SqlClient.SqlConnection conn = new System.Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings["ConnString"].ConnectionString);
System.Data.SqlClient.SqlDataAdapter adpt = new System.Data.SqlClient.SqlDataAdapter("SELECT number,finalcharges from invoices where invoicedate like '"+month+"%' ", conn);

DataTable dt = new DataTable();


adpt.Fill(dt);
customerReport.SetDataSource(dt);
CrystalReportViewer1.ReportSource = customerReport;
}

month is the index value taken from a list box




this is the code ive used to generate crystal report in one of my asp.net web site under button click event. This create report without any errors but after that print function is not working and when try to do any modification it asks for further details by giving a window like this

The report you requested requires further information.
DataSet
Server name: ...........
Database name: .........
User name: ..........
Password: ...........
(checkbox) Use Integrated Security


please help me this is very urgent
thank u....
... Read more

More replies
Relevance 37.31%
Question: Crystal Security

Anti-Malware
Crystal Security is an easy to use application that was created in order to help you quickly detect and remove malware that might affect your computer.
Cloud Based
The cloud based Crystal Security gathers data from millions of participating users systems around the world to help defend you from the very latest viruses and malware attacks.
Freeware
Cloud based malware detection, easy to use, user-friendly interface, automatic/manual updates, no installations, supports multiple languages and many other features.

Download: Crystal Security 3.2.0.72 Beta
Homepage- http://crystalsecurity.eu/
 

More replies
Relevance 37.31%
Question: Crystal Eye error

When I open my Crystal Eye Webcam (original driver) and click to take a photo, this window pops up:  The correct address would be C:\Users\Re?gn\Pictures\Picture 0009.jpg(with a different i)...  also my username is Ninetyfive on my pc so wtf:/ help

More replies
Relevance 37.31%

what is crystal reports and can i learn this on my own?
 

Answer:what is crystal reports

Results of a quick Google search ...

tovachanah said:

what is crystal reportsClick to expand...

http://www.businessobjects.com/products/reporting/crystalreports/default.asp

tovachanah said:

can i learn this on my own?Click to expand...

http://www.crystalreportsbook.com/
 

1 more replies
Relevance 37.31%
Question: Crystal question

Is there a way to run two different versions of Crystal Reports on the same PC? For the testing of Crystal reports from two different systems I need to find out if this can be done and how to set it up. I would need to run Crystal 8.5 and Crystal 9 (soon to be 11).
 

Answer:Crystal question

I don't think so because even if you do install the program to a different directory it will still overwrite system files used by the allpication.
You could make an image of your drive with Ghost in it's current config and then try and install another version in another directory. If it doesn't work you can always restore it from the image.
CR isn't very helpful tech support wise either unless you pay a premium for that support.
 

1 more replies
Relevance 37.31%
Question: Totals in Crystal

I have a report that shows counts of prescriptions by type. I then have a total at the bottom of all, and a total of all <>"w".So I have:E - 106H - 1L - 104W - 91grand total 302total<>w - 211What i need, is a percentage (211/302)=69%Any help would be appreciated. Right now, I am just using "insert summary".

Answer:Totals in Crystal

What program are you using?What is Crystal?MIKEhttp://www.skeptic.com/

4 more replies
Relevance 37.31%
Question: Crystal Reports

Does anyone know anything about advance formulas in Crystal Reports?
 

More replies
Relevance 37.31%
Question: Crystal Reports 10

I am new to Crystal Reports. I am customizing an existing report by adding another table and a message is returning "Failed to open rowset". How do I fix this...can't find anything in the documentation? Thanks for any help you can give.
 

Answer:Crystal Reports 10

Umm...this is the wrong forum to find an answer, I'll msg a mod to move it to the appropriate place for you

Welcome to TSG
 

1 more replies
Relevance 37.31%
Question: Crystal Reports

I am trying to run a crystal report that already has been designed.
It is on an XP computer and is using SDS database Access format.
It is a form that I need on one page for
each person in the database. When I print preview it, it goes to
two pages with a header and footer.
 

Answer:Crystal Reports

Sounds like it just needs some tweaking - can you zip and upload it and I will see what I can do for you.
If there is data that you need to keep confidential, make a copy and enter some junk data.
 

1 more replies
Relevance 37.31%

Hi,
I just installed windows 7 in my acer 4730z and the crystal eye web cam did not work. how can i resolve the problem? Any help...?!!.

Answer:Acer crystal eye web cam

  
Quote: Originally Posted by roi


Hi,
I just installed windows 7 in my acer 4730z and the crystal eye web cam did not work. how can i resolve the problem? Any help...?!!.


Try this link
Service & Support

1 more replies
Relevance 37.31%
Question: crystal eye webcam

i cannot get the webcam to work i get a message saying camera no found!! have downloaded and installed drivers from official site to no avail, can anyone help pls

Answer:crystal eye webcam

I'm guessing this is on a laptop? There will be a combination button (Fn and one of the F keys) to turn the webcam on & off - have you checked that?"I've always been mad, I know I've been mad, like the most of us..."

2 more replies
Relevance 37.31%

Crystal Security is a lightweight, cloud based anti-malware tool created in order to help you quickly block, detect and remove malware that might affect your computer. The cloud based Crystal Security gathers data from millions of participating users systems around the world to help defend you from the very latest viruses and malware attacks. Cloud based malware detection (provided by VirusTotal and Comodo File Intelligence), easy to use, user-friendly interface, automatic/manual updates, no installation, supports multiple languages and many other features.

What's new in this version:

Added Data files encryption
Added Tray menu: Silent mode
Added Hungarian language (translation by lostprophet)
Added Terms of Use
Improved Results
Updated Croatian language (translation by siketa)
Fixed Repeated popups
Other minor bugs

Homepage
 

More replies
Relevance 37.31%

Hello,

I am pleased to announce that a new BETA version of Crystal Security is available.
Crystal Security 3.5 BETA is completely rebuilt from the ground up to be better, faster and more efficient.

Remember: This release may still contain significant errors. Please try it carefully and if you as the user find anything
strange in the behavior of the program, then please feel free to let me know.

Looking forward to your feedback.

What's new in Crystal Security 3.5?

Re-designed user interface
One of the biggest changes in this version is design. It is now more user-friendly, provides more possibilites and information about current status, analysis, updates, results and actions.

Two separate versions - Installer and portable
It is now possible to use Crystal Security like any other product. Download the setup.. install (next, next, next).. finish and launch. After installation it is possible to run Crystal Security via desktop shortcut at anytime. Program is also listed under Programs and Features section for easy uninstallation.

Fully integrated Internal database - Active protection and Checkup
Each detected a potentially dangerous file is analyzed with Internal and Cloud database.

Trust applications with digital signature
For better performance it is now possible to Trust all digitally signed files automatically without any user interaction.

Password protection
Protect Crystal Security settings with your own password to avoid any unauthorized activity.

Learni... Read more

Answer:Crystal Security 3.5

Liseted !
 

more replies
Relevance 37.31%

Hello,

I don't know why my built in acer crystal web cam doesn't work anymore. I check the device manager and the application and I can't find it. Is there a way that I can put it back or download it from the net?

Jojo

Answer:Acer Crystal Eye web cam

Hi, jojoa73, and welcome to the forums.

If the camera is not showing up in device manager, then you'll need to figure out *why* it is not showing up there as a device.

To start off with, what have you done recently to your computer? Have you recently recovered from an infection on the computer? Have you changed settings on the computer? What OS are you running? Is every thing up to date (in terms of drivers and software updates)?

3 more replies
Relevance 37.31%
Question: crystal eye webcam

ok so i downloaded  acer crystal eye webcam but it says camera not found model is E1-532-2635 help it is a laptop i downloaded everything and nothing helps

Answer:crystal eye webcam

dogsparky,
 
Sorry to hear you are having issues with your webcam.
 

Where did you download the Acer Crystal Eye webcam application from, the Windows store?
Was there an issue with the camera application that was already installed?
I don't see any drivers listed for the webcam on our site, so I believe that the drivers are Microsoft drivers themselves designed for the installed webcam application.

1 more replies
Relevance 37.31%

When I click on my Acer Crystal Eye icon, it shows the initial screen but about 2 seconds later, goes back tothe desktop screen. I can't take pictures or videos because of this.

Answer:My Acer Crystal Eye is on and off

tigerclaw99,
 
Sorry to hear you're having webcam issues, could you provide us with the unit you are using so we can help try and narrow this down for you?

1 more replies
Relevance 37.31%

Hi
was running crystal reports 7.0 & office 97 on my old pc w/ 2000 professinal. I now have a new pc w/ xp professional os & office xp professional & can't get crystal reports to install or see my microsoft access. would be thankful for any help. crystal no longer supports 7.0 or older.
Thanks & have a good day

Jerry
 

More replies
Relevance 37.31%
Question: Acer Crystal Eye

I have an Aspire V5-571P-6648 and have Windows 8.1.  My webcam doesn't work wth Acer Crystal Eye.  However, it does work with the Microsoft Camera app.  Does anyone have any advice?

Answer:Acer Crystal Eye

I think Acer Crystal Eye is only usable for taking pictures and videos and saving them in your pictures file.For streaming videos (incoming), however, it will depend on the app being used to open your webcam.

2 more replies
Relevance 37.31%

Is the active protection of Crystal Security a good complement to WSA?
I am asking specifically about the active protection module.
If this is not a good solution, what is?
I am looking for a solution that leaves the system quick and responsive, even if it does not provide bullet-proof protection.
I am presently running WSA, with MBAE premium and glasswire free, on win10 pro x64.
So far, the system is pretty light and responsive, and I have avoided solutions like kaspersky and bitdefender, which tend to entangle themselves pretty deeply into the system, and can potentially cause problems and conflicts at some future (or present) point.
 

Answer:WSA + Crystal Security?

Stick to WSA on its own, no need to add CS into the mix.
Or go WD route.

Both you can keep MBAE.
WSA is still far superior to CS.
 

1 more replies
Relevance 37.31%

I have an Acer Travelmate 5520 with the Crystal Eye web cam. I havent used it (but it was working originally)and when I did want to use it I received the message "camera not found". In Device Manager there is no heading for Imaging Devices. I have downloaded updated drivers but the problem seams to be recognising the hardware.As with all things it is just out of warranty!I cannot find anything on any sites to help solve the problem.Does anyone have any ideas??many thanksJimbo

Answer:Acer Crystal Eye Web Cam

A whole month and not one reply, this is most dissapointing!! Nobody with any ideas then?I have downloaded two sets of drivers, Suyin and Bison, but don't know which is the correct one but in any case neither one seems to make a difference.I would be grateful for any response.Many thanks.

2 more replies
Relevance 37.31%
Question: Crystal Security

I found this product on Softpedia- I can't find more info on it.


Cloud-based classification system
Crystal Security is an easy to use application that was created in order to help you quickly detect and remove malware that might affect your computer.

Using Crystal Security you will be able to classify files and whitelist or blacklist them in no time.

Features:
HIPS System & Anti-Malware
?Cloud based malware detection
?Whitelist/Blacklist system
?Automatic/Manual updates
?No installations, just download and use
?Easily configurable

Requirements:
NET Framework 4
Supported OS:
Windows XP / 2003 / Vista / XP X64 / 2008 / Vista64 / 7 / 7 x64 / 2008 x64 / 8 32-bit / 8 64-bit

Homepage
Download
Softpedia

Download file is a self executable, requires no installation.

Would anyone like to test this product? I have not tried it yet.

Good day.
 

Answer:Crystal Security

Littlebits said:

I found this product on Softpedia- I can't find more info on it.

Would anyone like to test this product? I have not tried it yet.

Good day.Click to expand...

A user over youtube posted this product on the CAV test I did recently.

Was on my list to test run it but well, unforeseen circumstances prevented me to even attempt such test.
 

3 more replies
Relevance 37.31%
Question: Crystal Eye error

When I open my Crystal Eye Webcam (original driver) and click to take a photo, this window pops up:  The correct address would be C:\Users\Re?gn\Pictures\Picture 0009.jpg(with a different i)...  also my username is Ninetyfive on my pc so wtf:/ help

More replies
Relevance 37.31%

What do you guys and girls think of this Security software.

And it is on the Comodo Forum under Other Security Products

So check it out if you wish. and also here is the website all about it > http://www.crystalsecurity.uk.to/

Regards

Nigel
 

More replies
Relevance 36.9%

Help -- I have a computer running Visual DBase, the reports are created through crystal reports -- I am getting the error message CRW - Error has occurred in program close or ignored -- Is there a fix to this?
 

Answer:Crystal Reports Through DBase

Hi, tig. I'm thinking CRW is just crystal reports writer. Read and follow the directions under Periodic Hard Drive Maintenance in Article III for troubleshooting any of these types of errors. Once that's done, if the problem still remains, you move on to pinpointing an issue specific with crystal reports. If you do this type of maintenance regularly, then just let me know, and I'll see if I can't find something more specific. (I don't use CR myself)

------------------
~dreamboat~
WeDoManuals
Brainbench MVP for Microsoft Word
Brainbench
 

1 more replies
Relevance 36.9%

I've gotten this error trying to print a Crystal Report and am trying to figure out what is heppening with it.

Error:500 Not enough memory for operation
Execute <PEStartJob>

This is a new computer running XP w/ 1.99 Gb of Ram.

I've looked on the internet and some places said that i was missing a DLL. i downloaded the latest version of the DLL but still have not had any success.
 

More replies
Relevance 36.9%

I need some help regarding Crystal Reports! When I click on Refresh, I get the following error message:

Failed to open rowset.

Then when I click OK, I get the following:

Not supported.
Details: DAO Error Code: Oxc6f
Source: DAO.Database
Description: Not enough space on temporary disk.

I have no idea what's going on and how to fix it. Can anyone help?
 

Answer:Crystal Reports Error Msg

It depends how you've got Crystal configured, but if you're using the database to store your working tables, it could be that the tablespace that your using (Oracle term, but could be the same idea in SQl/MSDE/ODBC) for storing the data is short on space. Have a look at your connection settings and check the space available to the database / tablespace that your using rather than just 'space on disk'

Rich.
 

3 more replies
Relevance 36.9%
Question: crystal disc info

how do i connect to my sky plus hd box to my desk top pc to check hard drive using the crystal disc info prog i downloaded from here
can this be done wireless please advise
 

Answer:crystal disc info

harrygodfrety said:





how do i connect to my sky plus hd box to my desk top pc to check hard drive using the crystal disc info prog i downloaded from here
can this be done wireless please adviseClick to expand...

No, it can't be done wirelessly. The drive has to be physically connected either internally or via USB.
 

2 more replies
Relevance 36.9%

Hello,

It seems that the new IE7 will not populate any information what so ever from Crystal Reports.

It seems to just crash IE7 when someone trys to open a crystal reports web page.

anyone able to shed some light?
 

Answer:Crystal Reports not populating in IE7

I have worked it out.

IE7 blocks activeX.

If you open up Internet Explorer 7 and go into "Intern options" and click on the 'security' tab you can custom the security levels. Within the list you will see options for ActiveX, Change the options to allow Active X and bobs your uncle!!!
 

1 more replies
Relevance 36.9%

Is anyone out there using a product called rePortal to publish and distribute Crystal and other reports? It is marketed as an alternative to Crystal Enterprise. Seems almost too good to be true - is it?

Thanks,
Allyson
 

More replies
Relevance 36.9%

In MAS90 I use the Crystal Reports form in the payroll module to print the direct deposit stubs. Our client has asked if there is a way that the employees' bank account number only prints the last 4 digits rather than the whole number. ie, *******1234. I have tried using a formula for the field as follows: "********" & right([PR_32CrystalLine.DirectDepAccountNumber],4) however, I received an error message of "This array must be subscripted. For example: Array." I did bracket the source file, so I'm not sure what is missing. I have limited knowledge of Crystal Reports and usually have figured things out by trial and error. If anyone has a suggestion on what to try please HELP!!!
 

Answer:Crystal Reports/MAS90

DarleneR said:

In MAS90 I use the Crystal Reports form in the payroll module to print the direct deposit stubs. Our client has asked if there is a way that the employees' bank account number only prints the last 4 digits rather than the whole number. ie, *******1234. I have tried using a formula for the field as follows: "********" & right([PR_32CrystalLine.DirectDepAccountNumber],4) however, I received an error message of "This array must be subscripted. For example: Array." I did bracket the source file, so I'm not sure what is missing. I have limited knowledge of Crystal Reports and usually have figured things out by trial and error. If anyone has a suggestion on what to try please HELP!!!Click to expand...

Can't you just reduce the size of the field and then it will only print the last 4 digits? I believe this is possible. Why not just take the field off altogether?
 

1 more replies
Relevance 36.9%

Does anyone know anything concerning what Windows XP SP2 does in relation to being able to run reports with Crystal Reports?
We've tried with version 8 and 9.

Running a report with DHTML works fine, but ever since XP SP2, nothing comes up when using Crystal.

ANYTHING would help.
Thanks!
 

More replies
Relevance 36.9%

I have 3 or 4 reports ( AW-ASG3.RPT) that when open and being refreshed, give me this error message at the bottom, which of course stops everthing in it's tracks.

The only thing I can find on the Crystal site is a reference to the Windows path command but it solved nothing.

I have a half dozen other reports in the same folder on the same server that open fine and refresh just fine. I moved the entire folder to my local drive and tried from there with the same results.

Has anyone seen this aggravating problem before?? Please !!

Crystal Reports, Developer's Edition 8.5
Windows 98 SE (all upgrades / patches)
 

Answer:Crystal Reports error

Try updating the Microsoft Libraries. This will update that dll for you.

http://www.microsoft.com/windows98/...ecommended/S_WUFeatured/Libraries/Default.asp
 

2 more replies
Relevance 36.9%

Hello All,
I am not sure if this is the correct place to post this, if not please advise.

I am new to using Crystal Reports - I have an Access query that is being used in Crystal.

I used the Report Wizard to create the report and during the report wizard process I setup a filter on a specific field and input a specific value.
I want to update that filter to change the value and I cannot find how to do this.

The Crystal help says to Right-Click the member and select Edit, Filter, but no where do I see any filter options and I am not sure what a member is - I have been right-clicking the field in the report layout and checking the menu bars, but no luck.

Any ideas?

Thanks in advance
 

More replies
Relevance 36.9%

EDIT: SEE NEXT POST AND MOD WILL YOU PLEASE DELETE THIS ONE.
 

More replies
Relevance 36.9%

I was wondering if anyone here could help me with an issue that I have running Crystal Reports. I am currently running version 5.0 I think, and the big issue that I have is that every time that I create any type of report, once I export it out to Excel it is double spaced. I have tried everything that I know how to do in order to rectify this but I have had no luck. If anyone here can lead me down the right path I would greatly appreciate it. Thanks
 

Answer:Crystal Reports Question

If by double-spaced you mean every other row, use this workaround until you get it straighted out from CR:

Once in Excel, select one of the columns that is ALWAYS populated in the report; usually the first column.

Hit Edit-Go to, Special, choose Blanks, then Ok.

Hit Edit-Delete. You'll be asked...and you'll want to choose to delete the Entire Row.

You could easily record a macro to do this for you and store it in your personal.xls file. See www.thewordexpert.com/excel.htm for instructions.
 

2 more replies
Relevance 36.9%

Crystal Enterprise 10 (service pack 2)

Okay, so I have this problem. CE 10 is throwing the error "The database logon information for this report is either incomplete or incorrect" when I call a report. This is a documented known bug, and it's supposed to be handled by Service Pack 2 and the common object update from March. I've applied both "fixes" but it isn't fixed by either.

I've checked the event logs, but there's no error thrown there. The pageserver logs are empty. Getting through to Business Objects takes forever where I work, and even then they call someone else, who tells me what they said. I need help here. Any suggestions?
 

Answer:Problem with Crystal Enterprise 10

Is the database used in the report password protected in ODBC or OLEDB? I am assuming you are pulling the data from a local database. Also, are these old CR reports you are trying to use from a developer/newer version?
 

2 more replies
Relevance 36.9%

Hello,
I'm using Crystal Reports 9 and have a report as follows...

Report Header: Title and a graph showing number of vehicles per hour using a date field and an "Hour" formula.

Page Header: blank, supressed

Group Header #1: Grouped by work area (limited to two areas by a formula)

Group Header #2: Grouped by the hours as displayed in the graph, showing a count of vehicles per hour

Details: Showing the details of the vehicles, chassis numbers etc. Set to Hide (Drill down ok)

Group #2 Footer: unused

Group #1 Footer: Showing the sum of the count of vehicles per hour

I can double click on the bars in the graph to open up a drill-down page to display the details of those vehicles.

What I want to do is add column headers to the data in the Details section. This sounds simple enough, but I'm having a nightmare with it. I've tried creating a second Details section above the data, but this displays the titles once per record rather than once per page.
I also tried many variations of inserting a new group (or sub-group) and entering formulae into it's Supress (No Drill Down) and Hide (Drill down ok)boxes including restricting the display using DrillDownGroupLevel and PageNumber. I can successfully display the column titles at the top of the drilled down page, but then the Details data is not visible.

So, basically, I can have the data or the column titles, but seemingly not both!
I'm sure there's a simple way to get round this.
Gram
... Read more

Answer:Crystal Reports drill down

It's ok, I finally figured it out.
I split the Group #2 header into two seperate sections and supressed #2b using DrillDownGroupLevel = 0.

How I haven't stumbled across this already, I don't know. Seems that's the way it goes when you're teaching yourself a new program sans manual...
Gram
 

1 more replies
Relevance 36.9%

I have a client who has old Crystal 6 reports and is looking to upgrade to Crystal XI

There is a formula that will not compile due to a function not available in XI (FetchStringVar).

Does anyone know of any conversion tools to upgrade old Crystal reports to the current version?

Thanks
 

More replies
Relevance 36.9%

Hi All,

I've basically got a whole bunch of Crystal Reports that I want to try and accumulate into the one file for presentation purposes.

My ideal solution would be to have a Word 'template' set up which sourced a number of what I believe would be Crystal Report objects and thus populating a new report on simply opening the word document.

It wouldn't worry me that the reference addresses were static - just have the luxury to open one Word file (with all the word formatting in toe) and a report pretty much ready to rock.

Alternatively, I'm fairly new to Crystal so I'm unaware if there's a function that can consolidate the reports into a single file and exported as a single word doc?

I've been mucking around with VB controls within Word to pretty much no avail. Do I need to do this through some sort of small VB applet or something instead?

All help / leads would be greatly appreciated!!

Cheers,

Joel
 

More replies
Relevance 36.9%

Can anyone suggest a good book for self teaching crystal reports?

Thanks
 

Answer:Self taught Crystal Reports.. ???

Hi Jae....

Crystal is a tough program to "self-teach"
(there is really a lot to learn... cuz it can do so many things!!!)

I have (and use) The Complete Reference : Seagate Crystal Reports 8 by Osborne.... and it's pretty good (it also comes with a CD ).

I'm sure that there is one of those "Teach yourself xxx in 21 days" books out there....
but those tend to teach you what they think that you will need to know...
and it often does not include any actual practical examples.
That is my opinion, of course

I do suggest the book that I mentioned above...
although it costs $49.99 (US)

Maybe you should Google around for something (and maybe you will get lucky and find a forum that has a dedicated Crystal Reports forum .... and if so..... please pass along the addy )

Good luck
k
 

3 more replies
Relevance 36.9%

my cam was working fine. every once in a while it would seem fine but I'd have a black screen instead of an image. restarting usually would work. now even if I restart it keeps coming up black. any ideas?
 

More replies
Relevance 36.9%

my acer crystal eye web cam is not working, all I had to do when I got this computer was to go into my start botton where all of my programs was and click on ther webcam and take a picture,now I can not,I would lke to know how I can fix it.

Answer:Crystal Eye Webcam not working

Try going to...control panel...hardware and sound...under devices and printers enter device manager...when device manager loads select the "imaging devices" and enter...there is a tab that will tell you whether it is working correctly or not...there are options to update the driver in the driver tab.

9 more replies
Relevance 36.9%

get my pre installed crystal eye cam to work

Answer:how to i get my preinstalled crystal eye webcam to...

Try reinstalling the driverCameraCyberlinkWebCam Application1.5.2624.0031.3 MB2012/05/15Download

1 more replies
Relevance 36.9%

Aspire E14 (E5-473G-32HE) did not come with Acer Crystal. It only have a webcam that can not be turned-on. I checked driver and it shows only HD Webcam Installed correctly. Yet can not be turned on and the turned on settings can not still turn on the camera. LINE and Skype says "camera canot turn-on". The ridiculus part is, acer driver support does not even support the camera hardware. I cant find a webcam in their driver list downloads.

Answer:Re: Using Acer Crystal Eye Webcam

zeexui,
 
There should be a driver listed under the imaging devices section of the Device Manager. Try removing the driver and restarting to let the operating system reload it.

3 more replies
Relevance 36.9%

Crystal Security is a lightweight, cloud based anti-malware tool created in order to help you quickly block, detect and remove malware that might affect your computer. The cloud based Crystal Security gathers data from millions of participating users systems around the world to help defend you from the very latest viruses and malware attacks. Cloud based malware detection (provided by VirusTotal and Comodo File Intelligence), easy to use, user-friendly interface, automatic/manual updates, no installation, supports multiple languages and many other features.

What's new in this version:

Added: New settings, protection criteria.
Updated: Design (GUI).
Improved: Auto decision, protection, checkup, updater, notification.
Fixed: Several reported bugs, other minor bugs.

Download Link

Homepage
 

More replies
Relevance 36.9%

Hello,

I am pleased to announce that a new BETA version of Crystal Security is available.

What's new in Crystal Security 3.7

Added new Dynamic Engine

Dynamic engine is a new in-house engine. It is based on different rules set to determine if file is malicious or not.
It works in offline mode and does not require any database or database updates.

Added new Settings

- Show result based on in-house engines -

When unknown file is detected by Collective engine then decision will be based on other in-house engines
No more unknown alerts (useful for average users)
- Do not alert - wait for cloud response -

File will be uploaded to the cloud (without any alert/decision)
When analysis are done, then there will be known result for file by Collective engine
Improved Shell integration

When you start right-click scan then Crystal Security shows Overview section automatically which will help to keep an eye on analysis.

Improved User Interface

There are several changes under Settings (Protection and Behavior) section and also on notifications.

Improved Performance and other features

There are a lot of other changes and improvements in many features.

Two different types of downloads

Download installer version of Crystal Security 3.7.0.1
Download portable version of Crystal Security 3.7.0.1

Please uninstall any previous version completely to avoid conflicts.

Notice: Dynamic engine is currently enabled only in Active protection.

Looking forward to your feedback.

Regar... Read more

Answer:Crystal Security 3.7 BETA

Great work!
 

34 more replies
Relevance 36.9%

Ok so I googled around and such, nothing but people asking about it and no help. Ok so it does work, on stuff like msn. Now normally on xp it showed the camera in my computer. It does not. The last time I had w7 on this it was rc2 and bsod'd. Seems fine now, but still the cam problem. Is there anything I can do? Maybe a program that can take it over? Really looking for drivers for w7 for it. The model of laptop should not matter as my moms emachines and my Acer aspire ONE both have the same acer crystal eye cam and the same drivers worked, doesn't show for either of us. Drivers for mine only exist for XP but worked fine. Hers have vista but still not showing in my computer.

Again it does work on msn so its not as if its not working period.

Answer:acer crystal eye drivers

The cam probably won't ever show in My Computer. It is not recognized as a network location or storage. This is normal, and nothing to worry about. Try going to Control Panel>Devices and Printers instead.

7 more replies
Relevance 36.9%

Hello,

I am having a load of trouble with my webcam. I'm running on Win7 64 bit.
My laptop is a Acer Aspire 8930G. (specs are easy to find)
I have already tried to search for the drivers on the acer website. But they do not have anything that supports Windows 7. Also I can't find any drivers on the internet that actually fix my problem. I tried 64 bit vista drivers. without succes.

The webcam works perfect when I open the Crystal eye webcam program. As soon as I want to start the webcam in MSN Messenger or Skype, the webcam works. Untill connection has been made with the other contact. Then the cam just shuts down.

Also sometimes and really SOMETIMES. after trying to start the webcam like 50 times, it finally works. But this doesn't always work.

I posted this in drivers section because ( as far as I can see) it's a driver problem. The laptop is brand new, So that cant be the problem. And other webcams wont work on it too.
A friend of mine asked me if I could test his webcam for him. But it gave me the exact same problems as this one build in does.

My System:
Sorry for the Dutch language.


Please help
Skunkie

Answer:Problems with webcam Crystal eye

Does anyone know something i can do?

7 more replies
Relevance 36.9%

I have a General Ledger software package that uses (I believe) a run-time version of Crystal for generating the reports. The reports run on a scheduler and I prefer they be saved in text format. When they save, they're written as PDF, then converted to text format, and the PDF is deleted. Sometimes that PDF file isn't deleted and sometimes the file won't write. I know it's not permissions because it's fine 9 times out of 10. And I write 3 reports every night and when it fails, it's usually only one. It's all on a Server 2012 machine, including the output report files. Does anyone know if this is a Crystal issue or an issue with the G/L software. I've called them and they were worthless. Thanks!
 

More replies