Computer Support Forum

Ideapad S10 - Trackpoint?

Question: Ideapad S10 - Trackpoint?

Hi, I have a Thinkpad x30, and die Trackpoint is great! Why is there no S10 or S9 with a Trackpoint? Should be perfect for these Netbooks. Best Regards,Stephan













Solved!

Go to Solution.

Relevance 100%
Preferred Solution: Ideapad S10 - Trackpoint?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Ideapad S10 - Trackpoint?

Trackpoint is a Thinkpad only feature. This is one of the element tha distinguish Thinkpad from the rest of the Lenovo products.

6 more replies
Relevance 50.84%

For a while now, I have wondered why the virtual buttons shown in the utility http://imgur.com/Lljj1Z7 don?t function as advertised. According to the utility, I should get a left click if I depress the left are of the touchpad, a middle click if I push on the bumps, and a right click if I depress the right half of the touchpad. In my experience, I get a left click regardless of where I depress the touchpad. The only exception is when I depress the bumps in the top middle of the touchpad?when I do that, the mouse enters some weird scrolly mode where I scan scroll stuff with the trackpoint. It definitely does not emit a middle click. But, more importantly, I cannot figure out how to get trackpoint mode to emit a right click. How do I get trackpoint classic mode to work? Is there a way to downgrade the drive or use a non-lenovo branded driver to get it to behave properly? Right now, I?m relying on an external mouse just to middle click and right click. I?m using Windows 10 b10240 and, as in the post?s title, my trackpoint driver is the latest listed on Lenovo?s support site (which I think WU actually installed for me)?19.0.12.61. Why don?t the virtual buttons work and are there any other workarounds that don?t involve using a mode other than Trackpoint Classic?













Solved!

Go to Solution.

Answer:T540p unable to right-click with virtual buttons in trackpoint or trackpoint classic mode 19.0.12.61

Seems to have partially fixed iteslf since Windows Update (WU) installed 19.0.16. Now the right half of my touchpad performs a right click when in TrackPad Classic mode. However, the supposed ?middle click? zone still does a weird scrolly mode instead of sending a middle click. Guess I still have to use an external mouse to accomplish a middle click when using Classic TrackPoint mode, but at least the situtaion is better than when I couldn?t right click with this mode.

2 more replies
Relevance 50.02%

Hi, I got an S230u Twist last autumn and have been really happy with it. At the time, I ordered a set of replacement rubber TrackPoint caps. When I replaced the original cap the other day, I realised that the replacement ones are about 0.5mm shorter than the original one, with the result that the H and G keys get caught on the edge of the cap; you have to hit them quite hard to get them to work. I compared all the new caps from the packet against the original one, and sure enough; they're all a little too short. They fit, but it's annoying to have to go back and make sure all my ""G"s and "H"s typed correctly.  Has anyone else had the same problem? Lenovo, could this just have been a bad batch, and if so can I return the unused ones for a replacement set that is the correct height? 

Answer:S230u - replacement trackpoint TrackPoint caps are too short

If you bought them from Lenovo I'd just try and return them. If not dispute on eBay/PayPal/Credit Card. But never use poor quality TrackPoint Caps. Remember if a computer is running efficiently so is the person behind it generally. 





ThinkPad Twist S230U-OS-Windows 8.1 Pro 64-bitCPU-Intel Core i7 3517U @ 1.90GHz Ivy Bridge 22nm TechnologyRAM-8.00GB Single-Channel DDR3 @ 665MHz (9-9-9-24)Motherboard-LENOVO 3347CTO (CPU Socket - U3E1)Graphics-Wide viewing angle & High density FlexView Display 1366x768 ([email protected]) Intel HD Graphics 4000 (Lenovo)Storage-298GB Seagate ST320LT007-9ZV142 (SATA) 22GB SanDisk SSD U100 24GB (SSD) 29GB SDHC Card (SCSI)Audio-Realtek High Definition Audio

1 more replies
Relevance 49.2%

Hi, I wonder whether there is a way to enable press-to-click for the trackpoint on the new x1? In the respective settings there is no such options and I searched everywhere, somebody found it? Next question: In order to avoid the annoying noise of the clickpad everytime you press it, I would like to use the tap function of the touchpad while using the trackpoint to move the cursor. Unfortunately, tapping on the pad seems to be disabled during use of trackpoint - any smart hack to get this workig? Thanks to all,J

More replies
Relevance 41.82%

HelloLaptop Lenovo IdeaPad V580c (59-387366)Laptop Lenovo IdeaPad V580CA (59-381121)Laptop Lenovo IdeaPad Z500 (59-371606)there the video card nVidia GeForce GT 740M, 2 GB. What sort of Memory Bus Width? 64 or 128?What about Laptop Lenovo ThinkPad Edge E530 N4F76RT Black (http://shop.lenovo.ua/notebooks/Lenovo-ThinkPad-Edge-E530-N4F76RT.html#characteristics). What is Memory Bus Width?

More replies
Relevance 35.26%
Question: Trackpoint cap

I'm not sure if this is the place I'm supposed to post this. I absolutely hate the trackpoint when I type.  I type quite fast and I hit the trackpoint every once in a while -- but this is enough to really get on my nerves.  It's absolutely distracting.  Imagine typing out your thoughts then all of a sudden you hit the thing, get distracted, then irritated, and your thoughts gone.  ThinkPads are supposed to help you think.  The trackpoint unfortunately doesnt...  Are there a replacement tips that's depressed enough (and maybe colored black...) so that I dont hit it accidentally when I type?  Removing the tip works fine -- but it looks so ugly without it (makes it look like i'm using a broken equipment). Oh and I dont mind if the replacement cap will render the trackpoint unusable.  I just need it low enough so I dont accidentally hit it.













Solved!

Go to Solution.

Answer:Trackpoint cap

http://www-307.ibm.com/pc/support/site.wss/vlar-443ltu.html
 
these are the three different types of trackpoint caps. You might get lucky with the first type and there is no black trackpoint caps produced by Lenovo. 
 
You can disable the trackpoint by pressing Fn + F8 in windows and then select trackpad only. You can also disable trackpoint from BIOS menu. 

4 more replies
Relevance 35.26%
Question: Trackpoint

I T440s which I updated to Windows 10.  I updated the Lenovo drivers after updating and I have the latest Trackpaad/trackpoint drivers.  I want to use the track point but not the touchpad.  When I go into settings and choose either "Classic Trackpoint" or "Trackpoint Only", the buttons on the trackpad do not work.  Help, Please. Jim

More replies
Relevance 35.26%
Question: Trackpoint gone...

I did the usual "Windows update" this morning. After the installation had completed I noticed that my Trackpoint has "disappeared"! There is no reaction whatsoever when pressing the red dot and I can't control the mouse with it any more. I then checked in the control panel (no trace) and then had to learn, that it doesn't even exist in the device manager, either. I then rebooted, no change. I then even powered off and reboot from power off again, still no trackpoint! And after I downloaded the trackpoint driver from the Lenovo drivers download site and wanted to (re-)install the driver, I got an error message "this driver can not be installed on non-trackpoint systems". ?!? What? What the %@[email protected]#*%?  Where has my trackpoint gone??? How come, that it has completely disappeared? How do I get this thing working again? Edited: I later noticed, that a part of that Windows Update apparently was a new "Wacom Two Finger Touch" driver. Might that have to do with my disappeared Trackpoint? Michael PS.: Boy - is this annoying to have to work without Trackpoint! 













Solved!

Go to Solution.

Answer:Trackpoint gone...

I just had to learn that there is a Fn-key (F8) that allows to enable/disable Trackpoint and Touchpad. I must have accidentally operated that button without noticing (in fact, I hadn't even known before that there IS such an option...).Its setting was on "Touchpad only". After re-enabling the trackpoint there everything came back to normal. Wheew. What a relieve! :-) And it (most probably) had nothing to do with the Windows Update - just an unlucky conincidence! Michael

2 more replies
Relevance 35.26%

Hi ,
 
 
       We purchased 3 lenovo ideapad 110-15ISK Laptops (ideapad). in that i installed windows 7 professional os. i am trying to incre,decrease screen brightness(fn+f11,fn+f12). but brightness control buttons not working. how to control brighness part.Now brightness is very high. Because of this brightness i am getting eye pain. So Please provide me solution for brightness control. my mail id : ******@Gmail.com.
 
Mod's Edit: Email address removed from public view to protect owner from email harvesters.
 
 
 
Thanks. 
 

Answer:i am using lenovo ideapad 110-15ISK Laptop (ideapad) .. brightness buttons not working.

jagadeeshn wrote:i am trying to incre,decrease screen brightness(fn+f11,fn+f12). but brightness control buttons not working.I installed Windows 7 on my 700-15ISK, and the following version of the Lenovo "Energy Manager" application allowed the F12/F12 keys to control screen brightness: http://pcsupport.lenovo.com/gb/en/downloads/DS100173 If that does not work for you, you can control the screen brightness in Windows "Control Panel": (1) Click "Start" > "Control Panel" > "Display" > "Adjust brightness" (left side menu). (2) At the bottom of the screen there is a "Screen brightness" slider control. Drag that left or right to decrease or increase the brightness of the screen. -- from CyberSimian in the UK  

1 more replies
Relevance 35.26%

Hi all,Is there any chance to influence Lenovo about BIOS update wchich would turn on VT support (and some other BIOS settings)? Is there anyone who could pull some strings, whisper few words here and there and get it done I think all IdeaPads owners would greatly appreciate such an update (Anyone agree with me? ).





Ideapad Y530; P9500 @ 2.53 GHz; 250 GB 7200 rpm HDD; 4 GB OCZ RAM, nVIDIA GeForce 9300M GS

Answer:[IdeaPad Y530]Lenovo please TURN ON VT Support in IdeaPad line.

Call tech support and let them know that it is not acceptable that VT is not supported in the BIOS.

1 more replies
Relevance 34.85%
Question: Choppy Trackpoint

Hello, Got x120e the other day and I have one question: This is my first Thinkpad (and first time witha trackpoint) - the trackpoint moves kind of choppy. It's not smooth movements like with the trackpad, as if it's missing frames or something. It's still perfectly useable but seems odd. Is this normal?

Answer:Choppy Trackpoint

No, it's not normal.  Mine moves as smooth as the touchpad (if not smoother) and responds to how much I move the stick.  Have you looked into the UltraNav Properties field of the trackpoint?  I'll leave this up to the experts to help you here.  This is my first Lenovo product too. But I'll like to comment that I wish the trackpoint would be at positions where your fingers will be while holding the machine.  The middle position works fine for a bigger laptop, but this is an ultraportable. Remember the IBM PalmTopPC110?  http://www.komotch2.com/tps/pt110.htm And the Toshiba Libretto:  http://www.silverace.com/libretto/libretto100j.jpg Some models' trackpoints are even located at behind the screen (i.e. on the lid).PalmTopPC110

9 more replies
Relevance 34.85%

Good afternoon all,
We have an older IBM thinkpad 600x, that my husband uses to play simple off line games and read a few emails. The past few days when booting we are getting the error #08611.
From what I have been able to find I believe that this has something to do with the trackpoint.
We use a wireless mouse with this so do not need the track point. Can someone please tell me how to disable the trackpoint?
Thanks!!!
I wish a Happy & prosperous 2010 to all.
Vicks
 

Answer:IBM thinkpad trackpoint

Bump
 

1 more replies
Relevance 34.85%

My husband has an IBM 660e and yesterday the trackpoint started going crazy. It shoots off in any direction when you try to click on something. He has tried reinstalling drivers and nothing seems to work.

He needs suggestions before he goes as crazy as his trackpoint has gone.

Thank you in advance
 

More replies
Relevance 34.85%

Just couple days ago, my TrackPoint started to get weird. It started to move extremely fast on certain direction, and even I set to the lowest sensitivity, it still move extremely fast. Basically I have no control of the track point anymore. I tried to plug in a notebook mouse with trackpoint turned on, I still can't move my mouse. I have to disable the trackpoint. I even tried to replace the red cap but still no use. Does anyone have this problem and know how to fix this? Thanks.

More replies
Relevance 34.85%

OK, T60 Notebook and suddenly the TrackPoint and TouchPad stopped working.  I checked under the ThinkVantage tools and they are enabled.  I checked in the BIOS and the device(s) are enabled there as well.  I've had a TouchPad go bad before but the TrackPoint still worked.  Kinda strange both would go down at the same time.  So, in short: 1.  Has anyone out there experienced this and if so, how did you fix it?2.  Does anyone have the part number for a replacement TouchPad (I've searched the site and could find dang near everything else, but the TouchPad) TIA! 

Answer:TouchPad and TrackPoint

They're integrated parts of the palm rest. A cable connects all integrated parts of the palm rest to the machine. So I guess the cable isn't plugged in firmly enough. Remove the palm rest according to the hardware manual and check. If the cable has no problem, contact Lenovo to ask for a replacement palm rest.





RockwillThinkPad T61p 6459A12

1 more replies
Relevance 34.85%
Question: Trackpoint Issues

Hi, Just recently my trackpoint in my T61 stopped responding after having a little water in my keyboard near the left function and shift keys.  Attempting to fix the problem, I went to the mouse settings to make sure it was enabled, however the Trackpoint section was grayed out and the enabled box was unchecked. I also checked the BIOS settings and both the Trackpoint and touch pad are set to automatic. I have also uninstalled and reinstalled the Ultranav driver and utility. Is there anything else I should do to fix the problem? The amount of water that got into the keyboard did not look like it was much and evaporated pretty quickly, so I am not sure if this is just a coincidence or it is related to the water being in the keyboard.  I also tried tried the Trackpoint with a Ubuntu Live CD, but it did not work in Ubuntu either. Thanks













Solved!

Go to Solution.

Answer:Trackpoint Issues

Well, I got the problem fixed... I just restarted the computer one more time and the trackpoint started working... Odd. Anyways, I'm glad to have it back.

1 more replies
Relevance 34.85%
Question: Choppy Trackpoint

I know I just posted a thread, but I figured that issue is global enough to warranty its own. But this one seems to be specific to me.I'm a new Thinkpad (and trackpoint) user, and the trackpoint is very choppy for me. It seems to skip frames. For example, making a circular motion with the trackpad results in a continuous, smooth motion. But not so with the trackpoint. It seems to be micro-jumping (or skipping frames as I prefer to call it). This is easily noticeable when holding down the middle trackpoint button and attempting to scroll a page. The page does not scroll smoothly at all (has nothing to do with smooth scrolling, that's something else and not what I'm talking about).Now this isn't just with this X220. Before the X220 I briefly owned a x120e that had this EXACT same problem. I asked about it and people told me that is not normal. So I returned it and got this X220, but it's the same problem.The weird thing is that while this choppiness is present in Windows, it was just fine during the Windows install process. I've tried: disabling the trackpad, reducing/increasing trapoint sensetivity, updating drivers, removing drivers and reinstalling, bumping the priority of the driver to high. None helped. What are the chances I'd receive two machines with the same problem?

Answer:Choppy Trackpoint

Disabling the trackpad from the BIOS fixed the issue it seems (its definitely much smoother). Diasbling it within Windows did not help. If I recall correctly disabling the trackpad in the x120e from the BIOS was not an option. Too bad. But odd that others do not have this problem. Oh and my palm was not resting on the trackpad

5 more replies
Relevance 34.85%

Now that the 5th gen Thinkpad is here, the decline of the trackpoint becomes ever clearer.  Frankly, most of us would not be buying Thinkpads if they didn't have the trackpoint.  That's the X1's main advantage.  But Lenovo keeps making it worse.  First, the trackpoint caps that will fit the gen 4 and 5 come in only one, unpopular, variant and you can't get the soft rim version.  But more importantly, Lenovo keeps on degrading the software control of the trackpoint.  It used to be that you could adjust the sensitivity of the trackpoint, making it more or less stiff.  Even the softest setting was inadequate but it was something.  In the 5gen there is no option to change the stiffness or responsiveness of the trackpoint's movements at all.  Lenovo: hear your customers!! Please make the trackpoint MORE not less adjustable. 

More replies
Relevance 34.85%

E420S, Cannot get either to work. Cannot enable trackpoint or touchpad in UltraNav.

Answer:Trackpoint and Touchpad

Hi, ezedoh
 
The first thing I would recommend is the removal of the UltraNav driver from the system. This is best accomplished by using an external mouse to navigate the system. To uninstall the UltraNav driver, open the Start menu and type Device Managerinto the Search box, and then press Enter. Once here, double click on Mouse and other pointing devices, and then right-click on the UltraNav device. Naviage to the Driver tab and select Uninstall... from the bottom of the window. Follow the prompts to uninstall and then restart when prompted by Windows. Windows should install a generic driver for controlling the mouse. This should reinstate the touchpad to working order. If not, then continue using an external mouse for now. 
 
Once the UltraNav driver has been removed, I would recommend trying to use the standard Synaptics driver found here. Synaptics is the company that develops the UltraNav software, so there should be no loss of compatibility/features. I have witnessed several cases where this driver has helped others with mouse issues, so it may help yours as well.
 
Hope it helps,
Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Soluti... Read more

2 more replies
Relevance 34.85%
Question: Trackpoint problem

First of all, sorry if this questions been asked and answered. I've been searching off an on for several weeks for any online help to a trackpoint annoyance I've been having with no luck. I'm on a T61p running XP. (I upgraded the stock Vista, following an online guide). I have the Ultranav utility installed (I can see and change the options for the trackpoint/touchpad in the mouse control panel). Both the trackpoint and touchpad work. However, every once in a while the trackpoint just becomes totally unresponsive and the mouse pointer refuses to respond or move. For like 3-4 seconds. What's odd is that when this happens, the touchpad still works. (I'm trying to move or scroll with the trackpoint / topmost scroll button+trackpoint with now response, but use other finger to test touchpad and that responds.) It's really odd and really annoying. Has anyone had a similar problem? Any advice? Thanks!

More replies
Relevance 34.85%

Just received my new X200s. I can't find the two spare caps(classic dome and soft rim) in the package. Does lenovo stop providing those or they just forgot putting them in my package?  

Answer:Only one trackpoint cap comes with X200s?

I ordered my x200s in April 09 and got two extra caps!

1 more replies
Relevance 34.85%

It is my first thinkpad and was wondering what older users would say for it...

Answer:Is trackpoint durable ?

Hi beickus,It is in my standpoint but you don't have to push it hard to test it's limits, play it gently and use soft hands to use it. A simple touch works best, you don't really have to rest your finger on it. Hope it helps.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Español Visit my YouTube Channel

5 more replies
Relevance 34.85%

I have read a review of Yoga 2 Pro where the reviewer referred to the trackpoint, but when I go online to buy one it seems the trackpoint is gone? Is there a Yoga 2 Pro model which still retains the trackpoin?Elling













Solved!

Go to Solution.

Answer:Can I get Yoga 2 Pro with trackpoint

The IdeaPad Yogas (11, 11s, 13, 2, 2Pro) do not have the TrackPoint.
==> http://shop.lenovo.com/us/en/laptops/ideapad/yoga/
 
The ThinkPad Yoga, though, does feature the TrackPoint.
==> http://shop.lenovo.com/us/en/laptops/thinkpad/yoga-series/yoga/
 
Hope this helps.
Regards.

3 more replies
Relevance 34.85%

Hi all! The new s430 just arrived, containing some annoying problems :/ . One of them is the following: The Touchpad and the Trackpoint are not working at all. I can t de/activate them in the Win7-system-control. The drivers are up-to-date. Could it be a driver/software-problem? Greetings,Bvbnudel   

Answer:No Touchpad and Trackpoint

Hi Bvbnudel, Touchpad and Trackpoint are indeed different components, there is a little chance that will fail altogether. I would suggest re-install UltraNav driver and check with antivirus programs. For further assistance, please kindly contact local lenovo.UltraNav driver for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit) and XP (32-bit, 64-bit) - ThinkPadhttp://support.lenovo.com/en_US/downloads/detail.page?DocID=DS019164Worldwide Support Center phone list for ThinkPad, ThinkCentre and ThinkStation systemshttp://support.lenovo.com/en_US/detail.page?DocID=PD008370Fred





T61 + X201i

1 more replies
Relevance 34.85%

Is there any way to use the trackpoint on Lenovo computers as a joystick?  I.e. a device that would be useful for a flight simulator?  Essentially, it wouldn't be moving the mouse along a line based on the direction you're pushing it in with a speed based on your finger pressure,  but rather moving the mouse to a stationary position on the screen based on the direction and pressure you're pushing on it with.

Answer:Using the trackpoint as a joystick?

Download the latest version of ppjoy - it comes with a mouse to joystick driver that works well with trackpoint

1 more replies
Relevance 34.85%

Hello. I have a w520 and a problem. Sometimes trackpoint is not working, and sometimes after reboot it begin working again. But after time it cancel working totally. I change a keyboard to a new and trackpoint works for about two weeks and now it not works again (. I have traing reboot a laptop, but it did not help ( To exclude a software problem I load new windows from a DVD, but trackpoint continies not to work... For all time touchpad and keyboard and mouse works fine. Trackpoint for all time have enable in BIOS. Trackpoint keys are not working also. May be anybody have an idea what problem with touchpad I have? Thank you. Stas.

Answer:trackpoint does not work

Does it work properly in a Linux live USB environment?Unlikely, but maybe the motherboard is damaged and breaking the TrackPoint module on the keyboard? Does the keyboard connector look damaged?

1 more replies
Relevance 34.85%

I recently got a Thinkpad T420.  One of my favorite features is the nub, but for the past few days the nub has been impossible to use.  It will click things randomly and rapidly and also freezes and shakes the mouse.  Once I deactivate trackpoint it works fine, but it's one of my favorite features. I just bought the computer two weeks ago so I can't imagine the keyboard breaking already. Is it a software problem or something?













Solved!

Go to Solution.

Answer:TrackPoint Problems

@OutWeRoll,Check and see if you have the latest UltraNav Driver and Utility.http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS019164http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014080Also try booting into BIOS and reset to default. See if it helps.//JameZ

4 more replies
Relevance 34.85%

Hi All,Could someone help me to identify if my trackpoint on the T420S is broken?The images are here,http://img842.imageshack.us/img842/7643/fig1k.jpg http://img24.imageshack.us/img24/199/fig2h.jpg  In the first image, the red trackpoint can easily come out of the fixture on the keyboard. If I take out the red cap, there is a black thing as shown in second image located on key "G."  I try to jam it into the fixture, but did not work out.Should this black thing need to always stay in the fixture?Is it just be glued to the fixture?Should I ask Lenovo for a service?Thanks for your help.  

Answer:Is my trackpoint broken?

The images don't work, however, I think I understand.  The Trackpoint is a red rubber cap that just fits on a black plastic post between the G, H, and B keys.  It lifts right off of the black plastic post.  The post is a permanent part of the keyboard.  The "eraser" head is user replaceable when necessary. The underside of the Trackpoint "eraser" is hollowed out to fit over the black post.  It is snug, but does not require "jamming."  When in place, does it work?

3 more replies
Relevance 34.85%

Does anyone else have this problem?  Where the cursor keeps drifting after you let go when you are using the trackpoint? It doesn't do it all the time for me, but when it does, it kinda gets on my nerves.  Kinda takes the extra percision advantages away. Thanks!





Thinkpad T500 - Intel Core2 P8400 (2.26GHz), 4 gigs of ram, 160GB/7200rpm hard drive, ATI 3650 GPU, WSXGA+ panel

Answer:Trackpoint Drifting after let go

yeah i have that problem, and i have a friend with the same problem. its just because the rubber doesnt stay seated right on the piece is sitting on, if you push on it too hard. thats my guess, but i could be wrong. i notice if i dont push on the rubber part very hard it keeps that from happening. for some reason i always push straight down on the rubber piece and thats when it does it the most.





T400Intel® Core?2 Duo T9400 2.53 GHz__Windows 7 Professional__3GB Memory__160GB, 7200RPM Hard Drive__14.1? WXGA+TFT-CFL__ATI Mobility Radeon? HD 3470--

4 more replies
Relevance 34.85%

I have an odd problem.  When I bootup to the login screen, the mouse is disabled.  I can use the keyboard just fine, but I can't move the mouse at all.  It's more of an annoyance than anything, but if anyone knows how to enable the mouse at startup, I would greatly appreciate it. Thanks for your help,--sam

More replies
Relevance 34.85%

Hello. I have a w520 and a problem. Sometimes trackpoint is not working, and sometimes after reboot it begin working again. But after time it cancel working totally. I change a keyboard to a new and trackpoint works for about two weeks and now it not works again (. I have traing reboot a laptop, but it did not help ( To exclude a software problem I load new windows from a DVD, but trackpoint continies not to work... For all time touchpad and keyboard and mouse works fine. Trackpoint for all time have enable in BIOS. Trackpoint keys are not working also. May be anybody have an idea what problem with touchpad I have? Thank you. Stas.  

More replies
Relevance 34.85%

For the past week or two it seems that the mouse clicks on its own on my T420. This is in TrackPoint only mode (TouchPad disabled) with press to select disabled. This issue is reproducible as it generally happens right after a normal click or unclick. For example, if I highlight text in a word processor by clicking and dragging my cursor over the text when I release the button the system registers a phantom click within the next second or so. I also have noticed these phantom clicks after middle clickling. Does this sound like a possible driver issue or should I go ahead and call to have a tech come out and replace parts?

Answer:TrackPoint clicks on its own

@nibs,Try uninstalling UltraNav, reboot the laptop then install it back and see if it helps. If problem persist then I guess its time to contact the techs.

9 more replies
Relevance 34.85%

I just purchased an E430 and the "period" key was loose.  Upon receiving and replacing the new keyboard, the trackpoint and left/right clickers now do not work.  I've downloaded the latest UltraNAV driver and that did not work.  I've tried to access my Bios at startup but the F1 key does nothing when my system is booting up.  I know my F1 key works fine, as it enables my mute and Google chrome help when I use it normally.  Any suggestions?  I don't think it's user issue from the new install as every other key on the keyboard works just fine.  Thanks!

Answer:TrackPoint Not Working!!!!

Regarding the trackpoint looks like a hardware issue.Regarding the BIOS access it not shutting down Windows but RESTARTING it.Cheers.





If I helped you, please give me some kudos! ^^

7 more replies
Relevance 34.85%

I have a T60 laptop (purchased Jun 2006) which works great except for the trackpoint.  For the last few months, the trackpoint has not been working.  The touchpad works. Here are the steps I took to troubleshoot - 1.  Updated Ultra NAV driver and Utility software (the latest from lenovo website).  Actually un-installed old version and      re-installed new version2.  Updated the BIOS to the newer version and ensured that Trackpoint/NAV is set to enabled in BIOS3.  Replaced the keyboard (assumed it was a hardware problem).  During replacement, I made sure it was properly      seated to rule out a loose connection.4.  The motherboard was replaced last year (due to a another problem) so I assume it may not be the source of problem I have searched this and other websites but am out of luck.  Appreciate if any one can provide more leads/ideas to fix this.  I am not sure if this is software related. Thanks

Answer:Please help - Trackpoint not operational

how about the mouse properties is it enabled there





_______________________________Thinkpad R61 7733-1GUThinkpad X61T 7762-54UThinkpad X60T 6363-4GU_______________________________Did a member help you today? Thank them with a Kudo!If a post answers your question, please mark it as an "Accepted Solution"!Regards,GMAC

2 more replies
Relevance 34.85%

Hello I`ve had to clean up my Thinkpad t61p keyboard after an unfortunate incident involving a glass of soda, and now the trackpoint has gone crazy.I had to disable it because it was moving my cursor randomly to corners of the screen.I`ve also seem to have misplaced the little rubber bubble from my scroll button, but that`s not so important at the moment.Any ideas as to what might have gone wrong? thanks

Answer:Messed up my trackpoint

Nevermind, it`s back to normal.Any suggestions as to what I might be able to use as a replacement for the scroll rubber bubble ?

1 more replies
Relevance 34.85%

Hi everbody, from some reason the trackpoint didn't work on my thinkpad t410.i open the computer to clean the fun coller, and aftre this the trackpoint work fine for two day and from some reason it is stop to work, i buy new keyboark and it is still dont work.  I  try this on my windows and my ubuntu.  Happy Holiday Oshri barazani 

Answer:trackpoint did't work

Hi Oshri,
                           
Welcome to Lenovo Community!
                                                     
As per the query we understood that you are facing issue with track point not working in your Lenovo T410 laptop
The Fn-key (F8) allows the to enable/disable Trackpoint and Touchpad.
 
If the trackpoint is no longer working, this may be a good option to check before investigating device manager, updating / reinstalling trackpoint drivers or rebooting as discussed above.
 
Pressing Fn-F8 brings up the ultranav menu and allows the user to cycle through different trackpoint and touchpad configuration options.
 
Click here for the drivers.
 
Hope this helps. Do post back if issue persists!
        
Best regards,         
 
Ashwin.S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of t... Read more

1 more replies
Relevance 34.85%
Question: trackpoint loose

i just noticed a minute ago that my trackpoint is very very loose on my t61p it comes off with my finger when i lift it. is there any way i can fix it at home? or will it be covered by warranty?





T61P, 3gb ram, intel C2D 7500, Nvidia Quadro 570m GPU, and Windows7 RTM x64









Solved!

Go to Solution.

Answer:trackpoint loose

When you say the TrackPoint is loose, are you refering to the red cap that covers it?  If so, it's probably just worn out and needs to be replaced.  You can order replacements from Lenovo.  The part number is 73P2698, and here in the US, they're $9.99.  Sometimes they're also available on eBay.

3 more replies
Relevance 34.85%

I've been using Lenovo laptops for the last 10 years because of my preference for the trackpoint.  However, I recently purchased a P40 yoga and the trackpoint middle button scrolling is horrendous.  It takes 5 or 6 seconds before it starts scrolling.  Also, when you press the middle button, the cursor does not change to the scroll cursor.  Please help me fix this as I am very unhappy that my brand new computer does not work as well as my other (3 really old) Lenovo laptops.

More replies
Relevance 34.85%
Question: T440s - Trackpoint

I T440s which I updated to Windows 10.  I updated the Lenovo drivers after updating and I have the latest Trackpaad/trackpoint drivers.  I want to use the track point but not the touchpad.  When I go into settings and choose either "Classic Trackpoint" or "Trackpoint Only", the buttons on the trackpad do not work.  Help, Please.
 
Jim
 
 
Moderator comment: Model added to subject for clarity.

More replies
Relevance 34.85%
Question: Trackpoint speed

Hello, I have lenovo X61s;  how do I speed up the pointer please?Angster













Solved!

Go to Solution.

Answer:Trackpoint speed

Open 'Control Panel > Mouse'.
Open the 'ThinkPad' or 'ThinkPad UltraNav' tab.
At the top next to 'Pointing Options', click 'Advanced'
In the 'General' tab, you will see 'TrackPoint pointing speed', adjust the slider,

Depending on which Ultranav version you have installed the steps may be slightly different, but they should be roughly the same.

2 more replies
Relevance 34.85%
Question: R400 trackpoint

I have a Thinkpad R400 with Windows 7 installed. I have tried several times to activate the trackpoint with no success.I have checked in the bios screen which lists it as active (automatic) but when I check under mice in the control panel it only gives me the touch pad not the track point.I performed a driver update which gave me UntraNav but it has the track point greyed out. Any assistance in this would be greatly appreciated.

Answer:R400 trackpoint

Hi CountryLad, Have you installed Ultranav Utility and Ultranav Driver? Vince. 





__________________________________________________________________________________Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

5 more replies
Relevance 34.85%

(Moderator comment: Post from here split into a new thread. Title edited to reflect model.)
 
I'm using a Lenovo T61-8890 A24. It's a pretty old model but has been upgraded to be able to support Win 7 Ultimate 32bit. 
 
I currently am facing a similar issue. In the BIOS, both my trackpoint and touchpad is detected and set to Automatic.
If I remove the entire palm rest and touchpad panel, I'm able to get the trackpoint to work, however once the touchpad is connected, the trackpoint just stops working.
 
I tried to enable it on the Ultranav program but it just doesn't work.
 
I tried the mouse properties and the trackpoint function is greyed out as shown below.
 
Link to image 1
 
When I went into the device manager, the trackpoint is not detected.
 
Link to image 2
 
I tried installing all versions of Ultranav, tried BIOS updates, tried cleaning the connectors, and still can't get the trackpoint to work together with the touchpad. 
 
Any advice to this issue is greatly appreciated.
 
 
Moderator comment: Image(s) >50KB converted to link(s). Community Rules.

Answer:T61 - can't enable TrackPoint

Hi Dyna, Welcome to the forum. When you say Trackpoint doesn't work, do you mean:1. That trackpoint itself is not workingor 2. The left click, right click and scroll buttons associated with the trackpoint doesn't work. ========Also, you did not mention whether your trackpad works or not. Finally, what happens when you disable the trackpad in the BIOS menu? Does that affect your trackpoint and associated buttons' behaviours?

1 more replies
Relevance 34.85%

After just a few months of usage, my W510's TrackPoint cap came loose. I ordered a three-part TrackPoint cap collection on eBay. Alas, the caps don't fit.
 
No surprise if you look at this photo of a non-W-series keyboard with the cap removed. The TrackPoint post in my W-series ThinkPad is yellow rather than black and significantly smaller:
 
Link to picture
 
Also, the W-series is prominently absent from the list of supported models in Lenovo's specs of the replacement caps.
 
Anyone know if replacement caps for the W-series are available?
 
Also, how would I attach the cap? Just pushing it back didn't really do it for my original cap, it kept coming loose.
 
 
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules
 

Answer:Replacement TrackPoint cap?

some of the cap collection on ebay is fake. The W510 uses the same keyboard as mine T400s, and the real Lenovo trackpoint from T60 fits the T400s keyboard perfectly.

5 more replies
Relevance 34.85%
Question: x230 trackpoint

Hey,sometimes when I move my pointer somwhere and then release trackpoint the pointer goes a little bit backwards. Can it be fixed?Regards 

Answer:x230 trackpoint

TrackPoint drift has been happening as long as I can remember, at least back to the X31.  Release the trackpoint, and it may drift towards the top left.  If you let it drift, it stops after a few seconds and after that works properly.  At least for me this happens infrequently enough so as not to be a big deal.

9 more replies
Relevance 34.85%

The touchpad/trackpoint to move my cursor/arrow on the screen is not working. My USB Mouse works fine. Any ideas? Does not work when USB mouse is plugged in or not. Disreguard..........somehow it got turned off in BIOS

More replies
Relevance 34.85%

Hi
 
I got a 2nd hand Lenovo Ideapad 100S. It came with Win10 installed but had someone elses profile and data. 
(I am not sure if it originally had Win8.1 when it was shipped, there is no rollback option anymore)
 
My preference is to wipe the current installation completely by downloading Win10 and installing a clean copy off USB. 
 
I also usually prefer to delete all partitions, including recovery because future reinstallations can be done from scratch via USB. (I don't need the option of reinstalling from recovery partitions , the extra space is more important)
 
I see a warning in the user guide however .....
"Do not delete or modify the Recovery Partition on a WIMBoot-enabled computer. If the Recovery Partition is deleted or modified, you may not be able to restore Windows to the factory status. For computer models on which WIMBoot is enabled, deleting the Recovery Partition may cause Windows to fail to start. How can I determine whether the Windows running on my computer is WIMBoot enabled? WIMBoot technology is normally enabled on copies of Windows 10 Update running on SSD (or eMMC) -only computer models."
 
What is the best way to do this?

Install a clean copy and remove the partition by booting off a USB, or should I not do this?
Via Settings: settings > Recovery > Reset this PC > Remove everything, or
settings > Recovery > advanced startup > Reinstall from USB

Which of t... Read more

Answer:Ideapad 100s - Win10 clean installation on ideapad...

 Hi larrens , 
 
 
Welcome to the Community Forums. 
 
It's a good thing you posted first before proceeding with any clean installation. 
Not sure what the Machine Number is to verify the details and specifications of your system.
 
But if you have a pc with a Windows Image Boot (or WIMBoot) you may not want to choose a clean installation. 
This new deployment of installation is compressing part of a big OS file so that you can have an operating system that can only take small spaces intended for small storages (SSD).
 
Best option to wipe out previous owners profile is a have a fresh out of the box image is using the Puch button Factory reset (Novo key similar to Item 7 page 1). Simply shutdown the system and use the button to turn on, System Recovery option would provide One key recovery from initial backup to do it. 
 
WIM boot are usually created thru OEM depot authorized by Microsoft . DIY for WIMboot maybe a bit complicated.
Click on underlined links for further review. 
 
Hope this answered your query.
Update us. 
 
 
Regards

4 more replies
Relevance 34.44%

When I disable my trackpoint on my T540P it does not really disable, I am still able to use it afterwards. I'd like to disable it completely because it causes my cursor to move on its own. At the moment I have to wiggle it around a few times for the cursor to stop moving on its own and its annoying to do that constantly I used the following tutorial to disable the Trackpoint: https://support.lenovo.com/za/en/solutions/ht117094 Thanks

More replies
Relevance 34.44%

Heads up to potential buyers.  The X300 trackpoint and touchpad are not fully functional when used with Adobe Illustrator, Adobe Photoshop, MS Access, Remote Desktop, and other mainstream applications.  This is true for both XP and Windows OS.  The built-in pointing devices operate like a mouse without a wheel - you can point and click, but you cannot scroll.  This has been a known problem since June of 2008, and has been brought to the attention of this forum numerous times without resulting in any known action by Lenovo.WFaz

Answer:Touchpad/Trackpoint Warning

Lenovo released a newer version of the UltraNav driver that shows applicability to every Thinkpad except the one I own.  Has anyone tried the driver version 11.1.21.0 (released in August 08) on the X300?  The one installed on my X300 is version 7.0.1602.5 - this one is shown as being the latest UltraNav driver for the X300 in the Lenovo (lack of) Support website.

7 more replies
Relevance 34.44%

Anyone else have this problem? http://coreldraw.com/forums/t/2176.aspx?PageIndex=2 After using the trackpoint scrolling, the screen contents of CorelDraw disappear.  According to Corel, this is a problem with the trackpoint drivers.

More replies
Relevance 34.44%

Hello.  I just ran System Update & loaded the latest driver for my trackpoint.  Version 4.69.  Now I cannot adjust my trackpoint at all, I like it to be very fast & very sensitive.  However, his as defaulted to the factory settings.  Normally this would be easy to change but the settings for the trackpoint are gone. Has anyone had this problem?  Does anyone know how to fix.  I have spend about two hours trying to fix myself, including rolling back drivers & re-installing.  Nothing seems to get the trackpoint settings screen back. What is funny is that I only accepted this update as it was in System Update. 

More replies
Relevance 34.44%

Does anyone feel the Trackpoint feels a little heavy on the X200(s) or any of the newest ThinkPad models? I have an X200s, sensitivity set to lightest, mouse speed set to fastest with precision checked. The trackpoint on my X60s and X300 feel much lighter nd easier to move. Perhaps it's just the extremely high display DPI on the X200s? TIA, Kris.

Answer:X200s heavy Trackpoint

The Lenovo trackpoints are always 'heavy' out of the box. Go to the trackpoint settings in Control Panel > Mouse and adjust to 'light touch'.

1 more replies
Relevance 34.44%

Does anybody know of any third party programs to allow you to custom configure the Trackpoint right button?  I would love to change it from a right click to a "Browser Back" button to allow for easy web surfing.  Wouldn't it be awesome if you could hit that without moving your hands off the keyboard to go back one page in your web browser?





____________________________________________________________2015 3rd Gen. X1 Carbon | i5-5300U+256GB SSD+QHD (2560x1440) | IPS Multi-touch2012 x220 (i7-2640M 2.8GHz) | 8GB RAM | IPS display | upgraded 256GB mSATA Samsung SSD + 160GB SSD

More replies
Relevance 34.44%

Is there a way to increase trackpoint scroll (with middle button) speed? it's too slow!













Solved!

Go to Solution.

Answer:trackpoint scroll speed

I assume you've tried adjusting the TrackPoint firmness?Apply this registry patch:https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/Vertical-scrolling-got-reset-everytime-I...Go to Mouse Properties > Wheel tab. Set the number of lines scrolled to what you want to it to scroll.

9 more replies
Relevance 34.44%

From where can I order a new trackpoint (the rubber top)?













Solved!

Go to Solution.

Answer:Travelmate trackpoint 6592G

Hello, Unfortunately the green rubber part is not sold apart. The part number of your keyboard is:KB.INT00.076KEYBD.SWE.89KEY.TM6492G

4 more replies
Relevance 34.44%

Hi,   I bought an X61 (type: 7673-BE9) last month. Now I have met a trackpoint issue. It will not work at any time: no response to left and right buttons, no response to the red stick. If I reboot the system, it maybe works or doesn't. In the later case,  I noticed that there was a yellow exclamation mark before trackpoint in the hardware management.   I have tried to reinstall the trackpoint driver(4.62), but it was helpless. Here's my system information:    OS:    Windows XP sp2    BIOS: 2.07    Trackpoint Driver Version: 4.62   Would anyone please help me? Thanks a lot.                                Best Regards                                  Thiross

Answer:X61 trackpoint doesn't work

Hi, Im experiencing exactly the same Problems on my X61. I was using Windows Vista for three month and had no problems at all. The strange mouse behaviour just started after installing Windows XP. The funny thing is that the mouse stops working some seconds after the GUI boot. So i tried to kill all of the trackpoint tasks running, but I didnt find any task being responsible for this behaviour. My next try will be to stop some drivers and see if I can find the problem here.Did you find any other solution?Best regards,dkirsten

4 more replies
Relevance 34.44%

I have a x200 with Windows XP installed.  When I put the computer into standby or when it is on battery and shuts itself off to perserve power the trackpoint locks up and the only way I can get it to work is to reboot.  This only happens to the trackpoint.  If I have an external mouse attached, the mouse works -- trackpoint won't Anyone know of any solutions? let me know thanks Karl 

More replies
Relevance 34.44%

Hi - I buy Lenovos because of their trackpoint.  My most recent Lenovo is an X1 Carbon.  I was much surprised to note that the X1 appears to be the first ThinkPad that will no longer allow me to turn off the touchpad from the Mouse Settings.  Never mind - I disabled it for good in the BIOS.  (I would like to have the Mouse Settings back because I occasionally allow touchpad users on my laptop and they simply cannot cope.) Anyway, from day #1 of ownership of this laptop, I noticed some very odd behaviour of the trackpoint:  It simply "wanders off".  It likes the left margin a lot, and the top left corner still more.  It is possible to force the cursor out of this position (by pushing hard against the trackpoint) but as soon as I let go of the trackpoint again, it wanders back. Thing is, the problem will go away after a while.  "a while" may be anything between 10 and 60 secs.  I thought it might be a h/w bug - the trackpoint perhaps being "stuck" and needing to relax - but it occurs so often that I am more inclined to thing it is a driver bug. I believe to be on the latest driver 19.3.4.99 so consider this post as a heads-up - something is still not quite right here. PS:  I am not a geat fan of reboots.  So I have disabled Updates on my Win10Pro.  I was most recently forced into a reboot (first time in 3 months or so) because whenever I clicked the middle mouse button, my screen would turn off.&nbs... Read more

More replies
Relevance 34.44%

I am using MS Office 2007 on my Lenovo X60 with 2GB RAM and Win XP Proffesional.  I cannot scroll pages in MS Word 2007 using the standard scrolling type setting in the mouse properties dialog box in the control panel.  When I change the scrolling type setting to auto-select I am able to scroll but the scrolling is so fast that I cannot control it. Moreover, the scrolling does not work at all in either standard or auto-select mode in some of the MS Office dialog boxes.  I have upgraded to the latest trackpoint driver, but that does not seem to improve the situation.  Does anyone have a solution to this problem?

Answer:Trackpoint scrolling speed on X60

I think that when you set the scrolling type in mouse properties to auto, you simply use the standard mouse-wheel click auto-scrolling feature of Office. Check if you can find any Office setting that allows you to adjust the auto-scrolling speed.

2 more replies
Relevance 34.44%

Hi guys, Since updated to Windows 10, horizontal scrolling with trackpoint becomes unavailble in many situations such as in the PDF reader app or in excel... Anyone else having the same problem??

More replies
Relevance 34.44%

I want the scrolling reversed on Windows 10.  I can reverse it on the trackpad but can't find how to do it for the trackpad.  Anyone know how to do this?

More replies
Relevance 34.44%

Hi all, I'm having some issues with TrackPoint in my X240.I am using 'trackpoint only' mode (not classic.. mode becaues it disables gestures - which are quite usefull btw) Problem is, that sometimes clickpad have problems with left click recognition. It is really annoying, I have to click few times to actually click.I think it is worse after last software updates (lenovo ultra nav) Does anyone have this issue too?  Maybe Lenovo can add 3 physical buttons to my X240?













Solved!

Go to Solution.

Answer:X240 TrackPoint problems

Yes. This issue comes with the latest driver, see: http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X1-Carbon-Gen2-Using-TrackPad-for-TrackPoint-b... You are not the only one. Revert back to 18.0.7.34 - works much better. (http://drivers.softpedia.com/progDownload/Lenovo-ThinkPad-T440-Synaptics-UltraNav-Driver-180734-Down...

7 more replies
Relevance 34.44%

I just got my new X1, but found immediately that the buttons associated with trackpoint doesn't work. Actually only the left and middle buttons don't work, the right button works, so I guess it's not likely to be a software problem. Anyone has similar problem as this?

Answer:X1 trackpoint button problem

nope, you should have warranty still, just call up support and they should be able to help you, i.e. either to send you a keyboard for self replacement or send you off to the depot.

1 more replies
Relevance 34.44%

You know that rubber stick between the G and H keys on the new Carbon X1..? How do I replace it? In the old Thinkpads you could just yank it out, but with the X1, it seems to be stuck. Mine is working fine, I just want to replace it with the cat's tongue/classic type of eraser head. Would this be safe to do or might it scratch/dent the screen?  

Answer:How to change Trackpoint on Carbon X1?

Download the manual for your computer. That will tell you how to change out the trackpoint but (I haven't seen the x1c yet) the trackpoint there may well be smaller. Here is the LINK for the x1c maintenance manual

2 more replies
Relevance 34.44%

Hi,  The red trackpoint on my ThinkPad X1 is not as sensitive as expected. Does anyone know where to change the setting for the trackpoint? In old T60, they have productivity center to control these devices.  In X1 it seems there is no interface/software to do so. Thanks, wib10

Answer:X1 trackpoint setup problem

Hello wib10, welcome to Lenovo forums!
 
Do you run a factory installation?
 
The go into control panel, choose mouse, then you´ll see an UltraNav tab.
 
Click on it and you see options to adjust your TrackPoint/TrackPad
 
Kind regards
Andreas

1 more replies
Relevance 34.44%

Over the week, the trackpoint cap on my ThinkPad X131e just popped off, I've been unable to fit it back on properly. Even if it does seem to fit, it's not as responsive as it was. It's stiffer than before, even on the sensitive settings set to max. Whoops.





______________________________________________________Owner of: ThinkPad SL510, X131e, X230 (not fond of)Other systems: MSI GT640, Sony Vaio PCG 709K, Dell Latitude D430,

Answer:Trackpoint cap popped off and won't fit back in

Okay I'm getting tired of seeing NO reply. Bumping this.





______________________________________________________Owner of: ThinkPad SL510, X131e, X230 (not fond of)Other systems: MSI GT640, Sony Vaio PCG 709K, Dell Latitude D430,

6 more replies
Relevance 34.44%

I hope someone can help.  My Trackpoint has a mind of its own.  It just creeps up to the left and pins itself in the upper corner of the screen.  I have downloaded the latest drivers, this has no effect.  I am running XP S/3.  The battery problem is simply this, I don't know if the battery is 'shot' or the charger is not working.  Can anyone tell me how I can check either part before I have to buy something I don't need?I have been fooling around with this problem almost a month with no success.  Any help would be greatly appreciated.

Answer:TrackPoint and Battery Problems

I had the exact same problem for months.  I finally gave up and uninstalled the trackpoint completely and started using the USB mouse that works with my tablet.  That part works great but if you can't use a mouse that plugs into the back of the computer or anything else like a keyboard that plugs into that spot.  Forgive me for not knowing the technical term for that spot. Just a note of caution - a month or two after I uninstalled the trackpoint, I started getting an error message 8611 (please see my post right below yours) and this may be related.  I'm waiting to find out. Good luck, I know it drove me completely crazy.  In the meantime, try using another mouse, preferable a USB mouse since that's the only one that seems to respond. debbie

6 more replies
Relevance 34.44%

z61t both the trackpoint and ultranav mouse pointer hung and stopped working.Both the Bios and the Thinkpad Config show status as Automatic for both Trackpoint and Touchpad, but when the Ultranav Wizard is started, an error message says "Trackpoint is disabled from Bios.  Please enable it from Bios or Thinkpad configuration utility".Have tried updating the driver (7/14/09) and resetting the Bios to defaults with no change.Battery failed yesterday, and the Bios flash does not allow updating without a charged battery. Could the problems be related somehow?External USB mouse does work.Where do I go from here?Thanks in advance for the help

More replies
Relevance 34.44%

Hi all, I have an E540 and Windows 8 (I also have Linux and the problem doesn't happen there, its just in Windows 8). I can use tap to click when I navigate with the trackpad. However, as soon as I start using the trackpoint, I can no longer tap to click. When I go back to using the trackpad, tap to click starts working again. I've tried fiddling with the settings in control panel, but haven't found anything to change it yet (tap to click is checked there)  

Answer:Tap to click not working when using trackpoint

Hi Gibba,
Welcome to Lenovo Community Forums!
 
I?m sorry to hear that you are facing the issue with Tack pad on ThinkPad E540.
 
Please go to control panel -- mouse ? UltraNav ? Track Pad setting and Check the box Enable press to select option.
If you are unable to find UltraNav option, the you have to install touchpad drivers for that.
 
Click here to check the track pad setting.
 
Hope this helps. 
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Relevance 34.44%

From where can I order a new trackpoint (the rubber top)?











Solved!
Go to Solution.

Answer:Travelmate trackpoint 6592G

Hello, Unfortunately the green rubber part is not sold apart. The part number of your keyboard is:KB.INT00.076KEYBD.SWE.89KEY.TM6492G

4 more replies
Relevance 34.44%

Been bumbling along quite happily with my ThinkPad 600/2645/45U running on 98SE for quite a while. It's my in-car system.Only a slight niggle. With the trackpoint device, there are three buttons to represent the three mouse buttons. I would like to configure the (currently non-functioning) third button to be the 'double-click' button.However, search as I may, I cannot find a meaningful driver that will allow me to do this. I have found (I hope) a 'contact' facility to ask IBM, but I'm not 100% certain that I found the right one or that I will get a reply.Has any nice person out there had the same 'problem' and found a driver?Chris

Answer:ThinkPad 600 Trackpoint buttons

Chris, have you tried click here ?

7 more replies
Relevance 34.44%

The trackpoint on my x120e just stopped working, along with the accompanying buttons just below the keyboard.  However, the touchpad and its two buttons still work.  (This happened while I was using the computer -- no apparent change to system files prompted it.) I tried Fn+F8 to turn the trackpoint back on -- I can select the option but it doesn't take effect.  In advanced options, the option to turn the trackpoint on is grayed out. I downloaded and installed the latest UltraNav driver; no improvement.  I also looked in BIOS options and didn't see anything related to enabling the trackpoint. Has anyone else had an issue with this, or is it likely an old-fashioned hardware problem? Thanks for your help.

Answer:X120e Trackpoint problem

hey kdl79,
 
try uninstall the ultranav driver and software as well as the current mouse drivers that is installed. let windows install its generic drivers.
 
test your trackpoint and mouse and see if it works, then visit our support page and reinstall the drivers+software





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

1 more replies
Relevance 34.44%

I have an IBM T40 laptop. I have been having problems with the mouse properties. I opened up the advanced properties for the mouse and selected the UltraNav tab. I keep selecting the "Standard Scroll" option but it never stays. It keeps doing the smooth scrolling. For some reason, after my laptop has been on for a while, I can get the standard scroll option to stay. But then after a while longer it reverts back by itself. It usually happens when something disrupts my wireless internet connection. I have downloaded all the latest drivers that I could find from the IBM website. What is messing this up?
 

More replies
Relevance 34.44%

Hi, I have win98 on my laptop right now along with win2000 dual boot, at first I had win 98, then I decided to upgrade to xp and with that the mouse pointer was there but didn't move at all, on the ibm website it said the new driver was only good for win2000 on my model of thinkpad so I installed win2000, upgrade and then clean install with the newest driver for that model, now there is no mouse pointer at all, I had to put 98 on so I could use the laptop, any ideas?
 

More replies
Relevance 34.44%

I have always used an IBM lap with a trackpoint mouse (that small little nub above the "B" key).

I purchased a similar keyboard for my desktop (IBM part #84H8566) and have been relatively happy with it. Plugged into the back of the computer, it takes up both PS/2 ports (for the keyboard, itself, and the mouse).

My question is this: I want to keep using my keyboard, but I'd like to add an external trackball and mouse (probably a Microsoft Intellipoint or a Logitech). I particularly want the ability to have a scroll wheel.

Does anyone out there know if there is any way to add this trackball/mouse and avoid a software conflict as I go from trackpoint/keyboard to trackball/mouse?

And....if no one out there has an answer, do you have a tech support number at IBM I could call (with or without a $$$ tech charge). I've been all over IBM's site and I can't find a "non-subscription" one-time tech number to call.

Thanks much !!

cleveland, ohio
 

Answer:Trackpoint, IBM Keyboard & Mouse

6 more replies
Relevance 34.44%

I had an X201 and last year upgraded to the x240. Along with the loss of the physical trackpoint buttons, lenovo also drastically changed the trackpoint hardware. The trackpoint height was shortened, the overall sensitivity/acceleration was drastically reduced, and the "press-to-select" functionality was removed. Does anyone know if those issues have also been addressed in the new x250? That is, is this basically the old (better) trackpoint that was used in prevoius models (e.g., the x201), or is it the same (**bleep**ty) trackpoint as in the x240, just with physical buttons.  Thanks,Chris

Answer:x250 Trackpoint Question

Also, I tried to ask this question in a sales chat, and got the response "the trackpad functionality has been designed to reproduce that of older models."   I said I wasn't interested in the trackpad, just the trackpoint, and asked explicitly whether I could register a mouse click by pressing the trackpoint.  That caused the rep (or bot) to disconnect... after two full minutes of waiting I was requed for a new rep.  Thanks Lenovo for that great customer service experience.

2 more replies
Relevance 34.44%

Hi, not sure where to do this (or if maybe the issues are actually caused by some hardware issue), but I'd like to request an update to the trackpoint speed in the next Ultranav driver release.   I currently have my trackpoint speed cranked all the way up, along with my overall mouse speed, and have turned off pointer precision enhancement (which also slows mouse speed); but still have to work to move the cursor around the screen using the trackpoint.  This also makes it extemely difficult to control the cursor when I connect an external mouse (e.g., when I'm using the laptop at my office workstation). I'd say the speed is only getting up to about 3/4ths of the speed of my X201's trackpoint (if that).  This is not only inconvenient, but also frequently causes the tackpoint to lose its inertia settings so that it starts to drift uncontrollably up (or down) the screen (usually caused by slowly scrolling through a document).  This happens daily.   With this issue and the loss of the press-to-select feature, the trackpoint on the new 240 has been very, very disappointing.  It's a shame that such a useful feature has been so handicapped by the changes in the new machine.  Please bring back the old trackpoint (or fix these issues with software). - Chris

Answer:x240 trackpoint speed

Does anyone know if there's a registry setting that might allow me to increase the sensitivity of the trackpoint?  I'm going crazy trying to push the cursor around the screen on this laptop... Thanks,Chris

1 more replies
Relevance 34.44%

My fingers get very sore from using the trackpoint. Does anyone else have this problem? I keep having to switch fingers and they are all sore now, except pinky. I really need a solution for this. Is there something I can do to make the trackpoint more sensitive and responsive? I currently have it set to the max of "Light Touch" and pointer speed to "Fast".   

Answer:trackpoint and sore fingers

I have used Thinkpads for years and have surely experienced "Trackpoint Finger Syndrome".  However, there is a new Trackpoint cap that has helped me alot.  If you have a newer Think Pad it might have been included but not installed.  It is the "recessed dome" or "cup" cap.  This cap reduces the force needed to move the cursor by 10X.  You may even need to change your settings back to normal after installing it. In this photo it is the one on the left.  You won't believe the difference until you try it.   http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/integration.workflowroductDis...       

1 more replies
Relevance 34.44%

I recently took my SL500 to a local repair shop to get that notorious left hinge repaired. After picking it up, at some point, I noticed that my TrackPoint wasn't working anymore. The TrackPad is functioning perfectly, though. I opened it up and looked at the connectors and all seems fine in there. I've also updated drivers. Any thoughts? I'd prefer not to sink any more money in this machine (e.g. buying a new keyboard) if possible. Thanks in advance!

Answer:SL500 TrackPoint Not Working

Press Fn + F7 is the trackpoint disabled?

3 more replies
Relevance 34.44%

The center button (scrolling) on the track point no longer works. The Ultranav utility worked for a day or so (fn f8) but now tells me "ultranav driver not installed."  I reinstalled the driver, and still get the same message. This is frustrating....can anyone help?

More replies
Relevance 34.44%

So a quick summary...  I recently had my T60 open to see if it had bluetooth..  (it doesn't and can't add, no connector)   Anyway, put it back together, and now neither my trackpad or trackpoint work.  They show up in bios, and unplugging them makes them disappear in bios, but the OS acts like they are completely gone.  Also verified with a linux boot disc, it is not a windows driver issue.  (yes also tried all function key combos...)  Any ideas?  It seems strange that both would go out at the same time, since they are different ribbon cables.  All other keyboard functions work fine.  Also tried running with the trackpad unplugged, no change in the trackpoint, still dead.

More replies
Relevance 34.44%

A week or so ago the Trackpoint on my T60P (2007-AE7), running XP SP 3, started freezing a minute or two after booting the machine or waking it up.  Occasionally after a pause of a few minutes it will start working again on its own for a few seconds. I can?t relate the freezing to anything I changed on the machine.  And the machine doesn?t run hot ? I had a problem with the fan, which stopped working a couple of weeks ago; I removed, cleaned and oiled the fan, and it now works fine again. An external mouse I connected works fine at all times, as does the keyboard. What may provide a clue is that I normally only activate the Trackpoint alone without the Trackpad.  I notice that when both are active and the Trackpoint stops working, the Trackpad continues to work properly as do all the mouse buttons.                                                                                       Sometimes when the Trackpoint has stopped working and I activate the Trackpad, the Trackpoint will start working again for a little while.... Read more

Answer:Trackpoint freezes on T60P

How's your battery? Bad and/or generic batteries have been known to cause freezing issues on the *60/61 series...

9 more replies
Relevance 34.44%

Hi All,
 
The trusty T61 (14.1" widescreen, 7662) has lost its TrackPoint buttons.  All 3 of them.  Keyboard works, lower TrackPad buttons work.
 
It looks like the upper buttons are part of the keyboard assembly.  I'll pull the kbd tomorrow and reseat the connector.  Anything else I should check?  Any simple way to determine whether it's a kbd/TP button failure or something else?
 
i'm hesitant to put much into the machine since it has a discrete GPU.  Running fine so far, but on the "doomed" list.
 
Thanks,
Z.
 
 

Answer:T61 TrackPoint buttons dead

Try the keyboard from your T400 and see how it behaves with that one. 
 
Good luck. 

3 more replies
Relevance 34.44%

Hello,I have a new issue since i updated my t60p. I opened it to add a SSD and a new processor (T7200), and since i reassembled it, my trackpoint doesn't work unless i unplug the palm rest (so the touchpad id unplugged).If I plug the palm rest, the trackpoint stops to work. It does it even on a linux live cd, so it is not a driver problem.In the bios both trackpoint and touchpad are set on "automatic".Do you know this issue guys ?Thanks

Answer:[T60p] Trackpoint issue

This is odd, but if what you report is 100% accurate, then it must be caused by the disassembly, so I would suspect the keyboard connector. Try unplugging and replugging it on the system board. While it's off take a good look at both connectors with a jewers loop, see if you see any damage. If you do, don't go any further without extreme caution. The keyboard can be replaced very inexpensively, but if you damage the connector on the board, you're looking at a lot of work and money. I'll also state that I've done this hundreds of times and never had a problem like this, so it really sounds more like a software problem, but I won't doubt that you have ruled out that posibility, but you might want to double check. Also make sure all the other keys work on your keyboard...  in fact you may want to do that first. If your connector is damaged or not seated properly, it's probable that other keys won't be working too. There are many software programs to test keyboards, There are also online tests you can use. I found this one on a google search, but I make no claims to it's function, or the safety of the webpage.... keyboardtester.com So use it at your own risk





ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 8gb ram.

5 more replies
Relevance 34.44%

Hi, I encounter the following issues with my Thinkpad T430s:- sometimes the mouse pointer starts moving on its on, always towards the same direction and always at the same speed. Rebooting temporarily resolves the issue until it occurs again. Reducing the sensitivity in the driver software does not have any impact. Pressing the trackpoint and letting go does nothing to stop it. - the left mouse button acts like a weird combination of a left click + some function that brings up context menus, if available (e.g. on desktop). This happens using the trackpoint, touchpad and sometimes even when using an external mouse. - Right mouse button does not function at all. No matter what function is assigned to it in the driver software, it does not work. External mouse works. All this ONLY happens if the trackpoint is ENABLED in BIOS. If I disabled the trackpoint in the BIOS, touchpad and all mouse buttons work fine. I tried Windows 10 and Windows 7. The problems occur under both operating systems using different driver software. Therefore, I do believe this to be a hardware issue. Anyone has experienced this issues and knows a good way to fix it? Thanks in advance! 

Answer:T430s trackpoint issue

I cannot be sure without seeing it, but my guess is that you need a keyboard

2 more replies
Relevance 34.44%

hello,my touchpad and my trackpoint does not work I opened my thinkpad edge 15 and I saw that the flat cable was very damaging is it AC or other chause and where can I find this flat cable?thank fireoc

Answer:my touchpad and trackpoint is not working

up

2 more replies
Relevance 34.44%

Hi - can anyone help?T60 with XPThe red TrackPoint & buttons work when first booting up and entering the Windows password. After CSS Authentication fails, the TrackPoint & buttons no longer work but the TouchPad & buttons work.Why would this happen, please?Is it software or hardware?Thank you in advance,John

Answer:T60 TrackPoint and buttons not working

go into your control panel, under mouse is your trackpoint option available.

2 more replies
Relevance 34.44%

This is just a minor inconvenience, but I was just curious: Does anyone know how to change the settings to make the mouse the same speed as the trackpoint? I just got a new mouse with 1200dpi and with the mouse sensitivity at about halfway, they both vary in speed. I hate having to switch it every time I move away from my desk. The mouse I had before worked fine (it was a cheap mouse).

by the way, i'm using vista ultimate 64 on an IBM x60 tablet pc.

More replies
Relevance 34.44%

When I disable the trackpoint using Ultranav on my E520 it automatically enables itself when I reboot. Does anyone have a solution?

Answer:Disable trackpoint on E520

Do it through the Bios menu.

1 more replies
Relevance 34.44%

Neither Touchpad/TrackPoint are working on my R60. I was using it fine about 2 hours ago. Then I drove home when it was in sleep mode, and since it hasn't worked. I have tried to install the latest drivers from System Update under the blue button and also from Lenovo and still didn't work. When I go to check and make sure they are enabled all I get is this:UltraNav has been disabled in BIOS.So when I go to BIOS, it says that it is automatic. There are only 2 options for them. Automatic and Disabled. So what the heck is going on here?Thanks,Mac

Answer:Touchpad/TrackPoint NOT Working R60

Welcome to the forum! Try reverting BIOS to default settings (F9 once you enter it and F10 to save and exit) to see whether that changes anything. Good luck and let us know.

3 more replies
Relevance 34.44%

I have a problem with my R61. I can not inactivate the trackpoint nor the touchpad, as it should be in the Productivity centre. Once opened the window, I can click on the "inactivate" button, but is does not change anything. So therefore always the trackpoint and the touchpad are both active, which can be sometimes a disadvantage Thank you for any help.

More replies
Relevance 34.44%

  I've got an R61i model on Vista. The little red, 'mouse' button was disabled in order to use a traditional mouse, but now I want it back to the trackpoint. How do I do that- step-by-step?? Thank you













Solved!

Go to Solution.

Answer:How do I (re)-enable the trackpoint button?

Hi and welcome to the forum!Click Start, then type in "mouse" in the empty "search programs and files" field, click it, in the opened window select UltraNav, then check "Enable Trackpoint", thereafter "Apply".If it was disabled from the BIOS, then immediately press F1 when your thinkpad turns on, go to Config -> Mouse/Keyboard -> Trackpoint -> change disabled to automatic.Hope this helps.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Español Visit my YouTube Channel

2 more replies