I saw this while debugging my Y50-70 (windows 8.1 x64) which had shut down issues Need expert advise on which lenovo driver is this "lenovo HID"
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)
Got the same problem...Lenovo Z50-70Win 8.1 x64 The device sometimes doesnt correctly shut down.Display = black and LEDs are on. Need to turn it off "hardcore" via pushing the power button ca. 10 seconds. What the hel is going on? Windows says: The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000I installed all Lenovo drivers.
3 more repliesI keep getting this warning in Windows 10 at every boot, as well as:
Can't load \Driver\WUDFRD for ROOT\SYSTEM\0002
I've seen that this is unsolved in other threads, hence opening a new one...and crossing fingers
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
I am seeing several of these Warnings in the Event Viewer, Windows System logs. These are Event ID 219, Source Kernel-PnP.
That said, I am not experiencing any crashes, freezes, BSODs, and everything on my PC seems to be functional. So perhaps I can safely ignore these warnings, but I prefer to get to the bottom of something in case it will lead to problems in the future.
I have done some online research on this event, and none of the suggested fixes seem applicable to me. I have been vigilant in keeping all drivers on my machine up to date. I've checked, and there don't seem to be any newer drivers available for any of my hardware. I also have the Windows Driver Foundation - User-mode Driver Framework service set to "automatic" startup.
The details of this event are below.
Any suggested action to remedy my problem? Thanks!
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>212</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2017-01-01T19:23:45.837466800Z" />
<EventRecordID>51641</EventRecordID>
<Cor... Read more
Go to Start/Search and type devmgmt.msc, right click the devmgmt results and Run As Administrator. In the Elevated Device Manager, are there any devices with yellow flags? If so, these devices need drivers installed. Usually your video card driver.
https://social.technet.microsoft.com...ernel-pnp.aspx
I have a problem with my ThinkCentre E72 (Windows 8). Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP. Only thing that is plugged in my computer is mouse, keyboard and monitor. Many thanks,Matija
In case anyone else is affected by this, please have a look at my post in Kernel-pnp (PLEASE HELP). Best regards // ThinkErEr
ThinkCentre M900 Tiny, i7, 16GB, Samsung 950 PRO M.2 NVMe 512GB
Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)
Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.
Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more
I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:
Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.
Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true
and seems to be my error, but I cannot understand.
Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)
Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.
Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more
I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:
Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.
Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true
and seems to be my error, but I cannot understand.
I keep getting these 2 error msgs in Event Viewer on my Flex 14...anyone know what they are and how to resolve them? Thanks! The driver \Driver\WudfRd failed to load for the device ACPI\ACPI0008\2&daba3ff&2.========================The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000.
Got exactly the same problem with my Yoga 13. Seems to have happened after the latest windows update, resulting prolonged boot time
1 more repliesHello! I downgraded my Flex 14 to Windows 7 (64 bits).I found all the drivers except for two devices :- ROOT\LENOVOVHID\0000- ROOT\LENOVOVHID\0001Do you know what theses devices are for and what should I install? Thanks!
Solved!
Go to Solution.
Try installing Lenovo Energy Management from Windows 8.Download from here
3 more repliesHi,
Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)
It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.
The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.
Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.
Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.
From checking forums and searching I have found a few others with this issue and a few articles on its cause
WUDFRd failed to load for the device
Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2
I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.
Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!
Any thoughts?
I just started getting this exact same error message logged in Event Viewer when I plug a USB stick into a USB port. It happens with two different sticks from two different manufactures, but it does not happen every time I plug them in. It seems that it may mostly happen the first time I plug a stick in after I have booted up my PC.
Have you been able to find a solution to get these error codes to stop logging?
Hi
i have a couple of weeks ago installed windows and i just got bsod crash and this was the only error in the event viewer
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1. 01#18E3312D81B&1#.
after looking at the minidump i thought it was due to a usb vidio/audio capture device so i tried updating the drivers and windows update couldnt find any and i cant find any online.
could some one help me and check my dump file to see if im right.
thanks
Hi bftdsh.
A stray crash dump is not enough. Click on the button below ....
It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums
My PC started BSOD-ing a few days ago and now does it every few hours.
It starts with this error:
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.
Then moves on to:
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.
Then:
Installing printer driver Microsoft XPS Document Writer failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.
Then:
The print spooler failed to regenerate the printer driver information for driver Microsoft XPS Document Writer for environment Windows x64. Win32 system error code 1797 (0x705). This can occur after an operating system upgrade or because of data loss on the hard drive.
Finally:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff80c5d0d15b0, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: d35c98fc-b1e6-4003-bed9-f7cdbca575e2.
This started happening a few days ago, right after a new update from windows:
Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3201845)
Please check MSI for BIOS updates and update every driver that is possible from MSI.
3 more repliesHi,
I'm been having issues a looong time with different sorts of BSOD's but I've been able to cook it down to this last one after replacing both graphics card and Logitech headset.
Latest error which occuring at least once per day:
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{01539fd4-4f12-11e4-824c-806e6f6e6963}#00000000007E0000.
This happens very random and I'm really lost here.
Thanks! / Micke
Hi Frostflake,
Welcome to the 10forums.
Please uninstall Avast and use Windows Defender as alternative.
Avast - Uninstall Completely - Windows 7 Help Forums
Code:
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
ffffd000`22a74e98 fffff801`8ed3493cUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x5493c
Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`
Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)
This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:
I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.
My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):
Anyone else run across this condition or have a known solution using the latest driver?
Thanks,
aardvark
At Windows 10 startup this Warning appears in my Event Log as Event ID: 219.
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{a1c931b2-3b00-11e5-9c14-806e6f6e6963}#0000000008100000.
I know why this happens. The device in the message is an internal SATA AHCI hard drive. All AHCI drives, even internal ones, are considered removal or hot swapable. It even causes the safely remove icon to appear sort of like it was a USB drive. It happened on Windows 8.x. Don't remember if it happened on Windows 7. I can't make any changes in my BIOS to make it not hot swapable as there is no option for this drive.
The fix to get rid of the message in W8 was to modify the Service 'Windows Driver Foundation - User-mode Driver Framework' Changing the Startup type from Manual to Automatic fixed the problem. However, on Windows 10 this method does not work.
I can't disable the Service as it's needed for other devices. Just wondering if anyone found a nice clean way to get rid of the warning message like in W8?
I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.
4 more repliesI'm getting this error once a day, where my computer crashes, and the only way to turn it off is to reset it and turn off my charger so I can turn it on again. What can I do?
*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared
Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards
In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)
I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings
Hope this helps somebody else
mfG
Dave
See if this helps
> Type Services into the search box. Run the Services desktop app
> (You may need to click the column header to sort services by their name )
> Right click on Windows Driver Foundation.
> Select Properties and set Startup Type to Automatic
> Reboot
Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`
Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)
This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:
I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.
My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):
Anyone else run across this condition or have a known solution using the latest driver?
Thanks,
aardvark
I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.
Disabling hard disk hibernation solved the problem for me.
Just go to Power options -> Advanced Settings -> Hard Disk -> Turn off hard disk after -> Never
Hope it helps
Gal
*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared
Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards
In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)
I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings
Hope this helps somebody else
mfG
Dave
For the past couple of days i have been having a problem where my computer just shuts down on its own and then turns back on again. It mostly happens when im launching or playing a game but a couple of times i was just on the desktop and it restarted. I have checked the event logs and it keeps saying this:
The driver \Driver\WudfRd failed to load for the device SWD\SensorsAndLocationEnum\LPSensorSWDevice.
I have searched all over the internet for the past couple of days and have found multiple answers (all of which didn't work). Some say its the psu and others say its the gpu. I personally think it was the windows update that i did three days ago because that was the day it started but i have yet to see anything online about a windows update causing this. I have already updated the graphics drivers and chipset drivers but it didn't change anything. Can someone just tell me whats going on because is just built this pc about 6 months ago and nothing like this has ever happened.
Specs:
MSI Z87 GD65 Gaming Motherboard
Intel Core i7 4770K
Nvidia Geforce GTX 780TI
16GB DDR3 RAM 1333MHZ
680W PSU (Not sure what the brand is. I think it might be kentek or something)
Windows 8.1 Pro x64 - please find the complete system log warning details below and a (related or not?) disk controller error below. Motherboard is an ASRock B75 Pro 3 with an Intel B75 Chipset.
I keep getting these warnings. I get them for all my Windows Portable Devices (disk drives) on boot up. Here are my disks:
Disk 0 on internal SATA 3 connector off an
ASMedia ASM1061 chip on motherboard (internal drive, but enumerated as removable) - Seagate ST100DM003-1CH162 D: data drive
Disk 1 on internal SATA 3 connector off the B75 chipset on motherboard (internal drive, not enumerated as removable - gives no warnings or errors - Seagate ST100DM003-1CH162 C: system drive (has Windows 8.1 OS on it)
Disk (2 or 3 depends on order of USB connection) on external USB 2.0 connector off back I/O panel of motherboard - Kingston DT 101 II USB device F: backup thumb drive
Disk (2 or 3 - depends on order of USB connection) on external USB 3.0 connector off back I/O panel of motherboard - Seagate BlackArmor DAS35 USB device G: backup external hard drive
There are no symptoms other than another (probably unrelated) disk controller error (shown below). The controller error is on either drive 2 or 3, but never 0 or 1, so it is one of the external back up drives (the thumb drive or the BlackArmor drive).
Note that on boot up I get the warning for disk 0 above whether or not the external drives are connected so the disk controller error may be unrel... Read more
I get the following Warning, Event ID 219 in the System Log on each boot:
The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter\8&16310cd5&1&01.
The Event Log Online Help doesn't appear to be working anymore.
I was able to resolve these types of errors with the assistance of the Event Log Online Help in the past. Does anyone know the procedure to troubleshoot this error so it can be resolved?
Thank you for your assistance.
Regards More replies
Hello,
I've been experiencing multiple bluescreens daily and what's odd about them is they occur randomly while using many programs; however, I have noticed that they occur more frequently directly after opening a new tab, loading a new site or running a game (StarCraft II).
Looking through Event Viewer. I see a list of warnings and errors immediately prior to the BSOD. In chronological order:
9:07:18 PM CRITICAL- "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
9:07:28 PM WARNING- "The driver \Driver\WUDFRd failed to load for the device USB\VID_0483&PID_2016\5&249af6f9&0&2."
9:07:42 PM ERROR- "The previous system shutdown at 9:05:49 PM on ‎7/‎13/‎2011 was unexpected."
9:07:44 PM ERROR- "The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000099e0000007e, 0x0000000000000002, 0x0000000000000001, 0xfffff80002a92885). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 071311-32869-01."
9:07:47 PM ERROR- "Audit events have been dropped by the transport. 0"
I also get this warning quite often:
"The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 ... Read more
I get this message often and whenever I do, my Windows runs in slow motion The driver \Driver\WUDFRd failed to load for the device HID\VID_1B96&PID_0006&MI_01&Col02\8&1c39cefe&0&0001. What should I do?
I'm getting a warning in the event log upon startup. Windows 8.1 Pro. This is a IdeaCenter B750 AIO. I have no idea what driver this is so I need help fixing this error. What is WUDFRd ? All the information I can locate refers users to their OEM for a driver update.. Some mention a fingerprint reader but this system doesn't have one of those. ThanksBryan -------------------------------------------------- Log Name: SystemSource: Microsoft-Windows-Kernel-PnPDate: 2/10/2015 11:24:03 AMEvent ID: 219Task Category: (212)Level: WarningKeywords: User: MYPCDescription:The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0004.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" /> <EventID>219</EventID> <Version>0</Version> <Level>3</Level> <Task>212</Task> <Opcode>0</Opcode> <Keywords>0x800... Read more
Apparently I've received a "private message" here about this topic but can't locate how to get to that message,,
1 more repliesI just did a clean install of my X220 with Windows 7 Pro 64-bit using the latest X220 Lenovo drivers.I have a X220 with the fingerprint reader. Any time the laptop boots up I see this event in the event log:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E.The device USB\VID_147E corresponds to the fingerprint reader (I checked this in the device manager).Can someone help with this? Thanks!
i have similar "issue" with my W520: Log Name: SystemSource: Microsoft-Windows-DriverFrameworks-UserModeDate: 29. 7. 2011 0:49:19Event ID: 10114Task Category: Startup of the UMDF reflectorLevel: InformationKeywords: (2)User: SYSTEMComputer: ThinkPadDescription:The UMDF reflector was unable to complete startup because the WUDFPf service was not found. This service may be started later during boot, at which point Windows will attempt to start the device again. Log Name: SystemSource: Microsoft-Windows-Kernel-PnPDate: 29. 7. 2011 0:49:19Event ID: 219Task Category: (212)Level: WarningKeywords: User: SYSTEMComputer: ThinkPadDescription:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E&PID_2016\6&2e78673a&0&3. in my case it is related to external USB hard drive, which is displayed... Read more
9 more repliesI tried the "fix" suggested in another thread (change the service "Windows Driver Foundation" to Automatic from Manual) and it works for awhile. However, I have made the change several times since the Event Warning comes back after a few days. Anybody got a way to make the "Automatic" stick. Windows 8.1 seems to have a need make it "Manual"!
It should be set to manual w/trigger so that is not the solution to your issue (whatever that is):
3 more repliesI had to reinstall my IdeaPad z710 with Windows 7 x64 for a work program, but I'm having trouble getting the /root/lenovoVhid device installed. I did some searching and came across this thread, http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/root-lenovovhid-for-Lenovo-z500/m-p/1404859..., but the camera driver didn't seem to do anything for me. Is this a different device on the z710?
firedrow wrote:I had to reinstall my IdeaPad z710 with Windows 7 x64 for a work program, but I'm having trouble getting the /root/lenovoVhid device installed. I did some searching and came across this thread, http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/root-lenovovhid-for-Lenovo-z500/m-p/1404859..., but the camera driver didn't seem to do anything for me. Is this a different device on the z710?This is the link to your camera driver. The one provided in the link above are for the Z500.
3 more repliesHello,
I installed win 7 pro 64bit on a lenovo G510. Now there are one unknown devices, it is root/LenovoVhid. Does anyone know which drivers are missing?
Thanks much.
Link to image
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums
For unknown device, install the camera driver for Windows 7 and check. Download and install camera driver (AVC, Bison, Chicony, Lite-On) from below link:http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g510-no...
1 more repliesHello, i got this message in eventviewer after boot into Windows 7 x64: Error while loading driver \Driver\WUDFRd for device USB\VID_147E&PID_2016\6&32feb3ab&0&3. other versions of driver are tested (direct from UPEK and from MS Update catalog) but won't work too :-( Fingerprintsuite is now deinstalled (only latest driver from UPEK installed ) and message is still existing!!! If driver is not installed, no error message! Cables are checked and ok: Has anyone got an idea? regards Martin
Hi
Welcome to Lenovo Community
Try uninstalling the driver and clear it from windows registry .
Then Update the Bios to latest , after that install the drivers
Bios Update
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6quj17us.exe
FingerPrint reader
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/83f807ww.exe Hope This HelpsCheers!!!
This has been a problem for over a year now. 140+ identical PCs running identical images, with identical keyboards. Some have the problem, some do not, and it's incredibly unpredictable.
PCs are HP Compaq Elite 8300 SFF running Windows 7 x64 Professional.
People will be working at their PC, hear the USB disconnect sound, and their keyboard will become unusable for 30+ seconds.
An Event with ID 219 is created in the Event Log:
Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Date: 2014-03-31T16:15:30.226
Event ID: 219
Task: N/A
Level: Warning
Opcode: Info
Keyword: N/A
User: xxxxx
User Name: NT AUTHORITY\SYSTEM
Computer: xxxxx
Description:
The driver \Driver\kbdhid failed to load for the device HID\VID_03F0&PID_0324\7&3c64d09&0&0000.
For those affected, the frequency of the error runs anywhere from 10 times a day to once every few weeks.
Re-imaging the PC has no effect but that same image running on another PC with the same hardware can run without ever experiencing the problem. The system I use has not experienced the problem once in over a year.
I have rebuilt the image from scratch and pushed it out to a group of people experiencing the error. It seemed to resolve it for a few months and then the errors inexplicably came back. I've tried replacing the keyboards with completely different models. Again, it seemed to resolve it for a while and then it came back.
Moving the keyboard to different physical ports has no ef... Read more
I know this may sound simple; but have you tried completely uninstalling the keyboard from device manager; then let windows reinstall it? That may fix the issue. If not then post back.
4 more repliesI have this computer what for some reasons wont install USB Smartcard readers.
Its Win7 64.
I have tried different smartcards but they wont help, also i tried to install drives manually but still wont work. I uninstalled and installed drivers many times.
Also i tried, but didnt work:
Change the 'Windows Driver Foundation - User-Mode Driver Framework' from 'Manual' to 'Automatic'.
Also the error from events.
http://i.imgur.com/hP7Mu3L.jpg
I found something like this.
https://svn.eesti.ee/projektid/idkaa...r/atrfiltr.inx
Should i try it or would it be easier to just format the computer. Its a work pc and it wont take long time, there isnt that much stuff on it.
Update Chipset and USB controller Driver.
It would be helpful if you can send us a screenshot of Device Manage while Card reader is connected.
under the device instance path it shows ROOT\LEGACY_TUNEUPUTILITIESDRV\0000. What is the cause and solution of this missing driver? Using Fujitsu S7211 laptop
Most likely a program you uninstalled didn't clean up the registry entry.Where are you getting the "root" from?Answers are only as good as the information you provide.How to properly post a question: Sorry no tech support via PM's
4 more repliesI'm getting an unsuccessful driver install message on my windows 8.1 laptop that reads like this: Driver Management concluded the process to install driver NULL Driver for Device Instance ID ROOT\SCSIADAPTER\0000 with the following status: 0xE0000203
Under my device manager, under "other devices" there is a device labelled "unknown device" and under its details it also says SCSIADAPTER\0000 - what is this?
In addition to that, every time my system goes into sleep mode, it seems to crash and restart successfully on its own. In the reliability monitor report, I get the following message: windows stopped working. When viewing technical details, I get this message: The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xffffe001adb8e060, 0xffffd00173106a60, 0xffffe001b246bbd0). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 091415-36328-01.
I've also gotten a hardware error (the system used to frequently get them but it doesn't occur as frequently anymore). The message for the hardware error reads as: Description
A problem with your hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name: LiveKernelEvent
Code: 117
Parameter 1: ffffe00111328390
Parameter 2: fffff80173668d10
Parameter 3: 0
Parameter 4: 0
OS version: 6_3_9600
Service Pack: 0_0
Product: 768_1
OS Version: 6.3.9600.2.0.0.768.101
Locale ID: 4105
Basically, my system se... Read more
Hi ajthejay & Welcome to the forums ^_^,
Kindly upload the ZIP file by following the instructions below -
Blue Screen of Death (BSOD) Posting Instructions
Let me know how it goes ^_^
-Pranav
Hi,
So my first xps 13 had ASF2 force off issues so I returned it and wanted to give another try, hoping this time I'll be lucky enough to get a properly working unit this time. However,
Since 4 days my laptop reboot 3 times, ASF2 force off error in power logs every time. And The driver \Driver\WUDFRd failed to load for the device ACPI\INT3400\2&daba3ff&0 error in event viewer. (Also attached. ) Also whenever this problem occurs, "The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 30 seconds since the last report." warning is also given afterwards.
edit: All of them happened while on battery
Help and suggestions are welcomed. I will send this unit back and stay away from dell If i can not solve this again.
after install win7 64 for z510 i found unknown device on device manager.device ID : root\lenovovhidplease help.
Check for driver updates, if any windows will find it.. It would probably e the sd card reader or something...
6 more repliesI have this problem:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)
The driver could not be loaded because a previous version of the driver is still in memory.
and now I am not able to connect any usb device to my laptop making it virtually impossible to use windows 10.
How do I downgrade to windows 7,have enough of the beta testing.
I even have a purchased version of windows 10 pro which I really regret buying, worst investment ever.
Hi,
I have recently bought Samsung galaxy S5 device. When I tried to connect it to my computer I nothing happend (what should have happen is that it will pop up the "What do you want to do? Go to folder/..." menu).
So I tried another usb socket. still the same problem. I have Ubunto install as a sperate OS on my computer, and there everything is working fine - so the problem is not in the cable/USB on my computer.
I went to Device manager and under "Portable devices" I see the "SAMSUNG Mobile MTP Device" icon with a yellow mark. I open it and I see "this device is not working properly because windows cannot load the drivers required for this device. (code 31)". I also have "SAMSUNG Mobile USB Modem" under modem in device manager (but it says that this device is working properly).
I tried to remove the "SAMSUNG Mobile MTP Device" and double click it and choose "update driver"->"search online". It found the driver but was unable to install it (got a "access deined" screen).
**This is not a problem of registry "UpperFilter"/"LowerFilter" problem. I saw it online while I was google a soultion and this is not my case***
I also tried to install the driver by installing "samsung KIES". It didn't help.
When I connect the decive and go to Windows Update -> a new update for samsung mobile is showing but when I choose it and click update it fails e... Read more
I don't know the answer to this, but I see you've had many views and no replies.
I'm sure that you've googled this and it isn't to patronize you, but here are a couple things I've found that MAY help.
Possible Solution 1:
"Access Denied" Message During USB Device Installation - National Instruments
Possible Solution 2:
When installing the driver(s),
Quote:
Even though you allowed admin in your user profle and allowed it to run in admin, this does not give you full control for all users. Do the following below. Then, Logoff, login with the new admin owner. Only the owner of this pc has full user rights.
Its worth a shot
How to enable the hiding admin account for login
1- In the run type: secpol.msc
2- Find and click on, Local Policies,security options,
3- Over to the Right in the policy setting, (accounts: Administrators account status) Enable
Close tht and got to
1- Run, lusrmgr.msc
2- Create a new user, or use Administrater, Built-in account for administering.
3- Right click, Properties
4- Uncheck, Account is disabled
If you chose you can change the name and add a password, now when you log off you can have the options to log in as admin, owner of this pc and have controll over all users. its better to have th admin login the the below
Or this but sometimes this method has failed and sometimes not
net user administrator /active:yes ,you have admin until reboot, or you go no.
I am getting a yellow? in device manager on Unknown device and the details I see this: ROOT\SCSIADAPTER\0000
I am running Windows 8.1 with Media Center.
My computer specks are as follows:
1) Intel i7 3930K
2) Video card PNY VCGGTX6804XPB GeForce GTX 680
3) Motherboard Asus Rampage 1V Extreme LGA 2011 Intel X79 Sata 6GB/S USB 3.0 extended ATX motherboard
4) Memory G.SKILL RipjawsZ F3-19200CL10Q2-64GBZHD 64GB
5)Hard drives 2 SAMSUNG 840 Pro Series 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD) in raid 0 configuration 235.00 each
6)2 Storage Hard drive Western Digital Black 4TB 7200RPM SATA3/SATA 6.0 GB/s 64MB Desktop Hard Drive (3.5 inch)
7) Power supply Corsair CMPSU-1200AX 1200-Watt Power Supply
8) Blu-Ray burner LG Black 14X BD-R 2X BD-RE 16X DVD+R
9) Corsair Hydro Series H100 Extreme Performance Liquid CPU Cooler Liquid cooling system
10) Cooler Master HAF X RC-942-KKN1 Black Steel & Plastic ATX Full Tower Gaming Case
Any Ideas on what can be causing this issue?
any help would be greatly appreciated
Hi,
Try to remove it then click scan for hardware changes.
Hello.In "device manager" I see an unknown device with this Id : ROOT\LEGACY_NPF\0000 (plus other references,see next): http://tinyurl.com/lzgqz2hAnd in "information system" : http://tinyurl.com/l9udv4aCarefully I desactivated this device.For now I prefere not uninstall this device because with this desactivation I known where I can find this device and I can still see these features.This device corresponds to nothing about my installation (hardware and software), so I think.And with this device disabled my pc run normally as before.Infection or simple problem ?Does anyone could help me (with a ZHPDiag or a HiJackThis rapport for exemple) for this problem and if necessary tell me how properly eradicate this unknown device from my PC ?Some precisions :My system : windows XP pro - SP3My antivirus (Comodo), adwcleaner and malwarebytes didn't find anything.My PC runs well (excepted sometimes for some slowing down but I think this is due to my configuration --> processor : 1,81 Hz / RAM : 2 Go).Thanks for your support.message edited by craumt
Refer to this solved thread, same problem:http://www.computing.net/answers/se...
33 more repliesHi there,
I have the above error in relation to my webcam (which wont work at all, its intergrated) and ive tried googling the answers and they havent worked. I really dont know what else to try...please help
Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Pentium(R) CPU 3825U @ 1.90GHz, Intel64 Family 6 Model 61 Stepping 4
Processor Count: 4
RAM: 8107 Mb
Graphics Card: Intel(R) HD Graphics, 1024 Mb
Hard Drives: C: 1846 GB (1754 GB Free); D: 15 GB (1 GB Free);
Motherboard: HP, 80C1
Antivirus: Windows Defender, Disabled
trying to fix audio problems, volume control states that no audio output device is installed, i downloaded the appropriate driver from lenovo site, also downloaded two seperate versions of conexant, the installation process begins but is cut short and the following message displayed..."driver instalation failed could not find the MEDIA device for this driver" can anyone offer some advice?
nath, welcome to the forum, have you installed the UAA HD audio driver? You can find it by scrolling down a bit on the R61e Audio Driver Site, please ensure you follow the instructions. Hope this helps
2 more repliesI tried to update my older Radeon ATI 5450 GPU via windows update...
I received the message from windows update, and showed it failed update with the 0x800706be
However when I go to device manager and check the details of the installed driver it clearly shows the new updated version? So I wonder which is correct the device manager showing the new version of the driver or windows update?
You can identify the problem using Device Manager, which you can access by:
Opening the Control Panel Window
Selecting and double-clicking System
Clicking Device Manager
In Device Manager check if there is an exclamation point, a yellow triangle, or a question mark against your Dell device. If there is, there is a problem with your Dell device.
Hi , I just reinstalled my SL500 but i got a problem.I download the lastest audio driver from lenovo site and i've got this message Driver Installation Failed : Could not find MEDIA device for this driver....I've searched everything i could find in google and the forums but i've got nothing... I'm usin Win XP
More repliesOk I have done quite alot of searching on here and I have found out quite a few things I have exhausted every friggin resource imagineable. The only thing I have yet to try is the registry edit. Now I pretty much have that down I just have one simple question. When deleting the upper and lower filters...
While in the registry I have found the upper filters on the right hand side. The only problem there is - No lower filters.
Could this be a problem?
Also , do the upper/lower filters need to be removed from the Control set 001 and Control set 002 . Please get back to me ASAP.
Thanks.
Anyone have even the slightest clue please let me know.
In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller
LIKE THIS
AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS
How can I fix this???
Any help is greatly appreciated
Please help me. For both of my cd/dvd rom drives I get the following error: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
Click Troubleshoot to start the troubleshooter for this device. How can I fix this?
Any help is greatly appreciated,
thisismyuser
16 more replies
Hello everyone, I'm new here and after searching without finding i am asking for your help.
I have just updated from Me to Xp update install,all is working fine except the sound card drivers won't load and in the device manager it says
'Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)'.next to my 'Creative Audigy Audio Processor(WDM)
My system is:
a7v8x-x asus MB
amd sempron 2500+ socket A processor
audigy platinum ex
512 MB RAM
I have updated the MB and the Processer Bios,I have installed sp2for XP,
I have tried to follow 'instructions' from Creative Support etc.
I really need some advice.
Thanks
Kurt
Go to the sound card makers web site and DN the latest XP drivers.
hey iv gotta western digital 3200aavs and my new hardware wizard wnt install it.. i tried driver detective.. but tht cnt identify my computer make and model ect.. so tht wnt help... and wen i connect my hdd via usb it blings so i know it cn see it but nufn in manage tab tht i access via rgt clickn my comp.. nufn in device manager so its not a matter off not bein allocated a drive letter.. i think my comp doesnt even regester it is a hdd!! any ideas?? or drivers?
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) <-- This god for shaken message is stopping me from enjoying my computer.
The driver is MAT****A DVD-RAM UJ-861H ATA Device
And that up there is the error message, i havnt downloaded anything i just pressed the button on the cd/dvd drive and my computer shut down and when i turned it back on nothing it it worked.
Does anyone know how to fix this? Im practilly computer illiterate so please be easy on the big words and stuff =]
Please try the steps below:
1. Uninstall all third-party burning software, such as Nero and Roxio.
2. Perform a Clean Boot to test the result.
Clean Boot
========
a. Click Start, type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.
Note: Please click Continue if the "User Account Control" window pops up.
b. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
c. Click the "Startup" tab, click "Disable All" and click "OK".
d. Restart the computer and test the issue.
Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of "Don't show this message" and then click "OK".
Please test this issue in the Clean Boot environment. If the issue disappears, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.
If the issue persists, please contact your computer manufacturer to check if the DVD drive is damaged.
If not, you may need to restore the system to its factory settings.
Hope it helps.
In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller
LIKE THIS
AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS
How can I fix this??? I really need help to fix this
Any help is greatly appreciated
8 more replies
hello there i am doug i am having a problem with Ndis2 Driver in the device manager it has an exclamation on it and when i into it it says it can not load the device driver so i tried to upgrade it but then it says the best driver is already installed so i am confused please does anyone have any good ideas?? please if possible email me direct to [email protected] thank you
Right click the offending device in Device and select Remove.Make sure beforehand you have the correct driver.Re-boot and re-install the driver and you should be good to go...
9 more repliesApparently, I am one of many who seem to be having this issue. And just like everybody else, I turned to Google for some answers. Here is my scenario (perhaps gregrocker could point me in the right direction?):
I am running on a laptop with the following specs:
Dell Studio 1735
32-bit Vista Home Premium, SP1
Intel 2 Core Duo, T8100 @ 2.10 GHz
250 GB SATA HDD, 5400 RPM
4 GBs of RAM
256 ATI Mobility Radeon HD 3650
8x Slot Load CD / DVD Burner (Dual Layer DVD+/-R Drive)
I downloaded the .iso image of Windows 7 through the software program at Penn State and burned it to a DVD. When I restart my computer and boot off of the DVD drive, I get the Windows 7 Installation interface. As the setup begins, I get an error message that says "Load Driver" across the top of the window, and says "A required CD/DVD Drive Device Driver is missing". I tried a few things to circumvent this issue:
1. I swapped out the installation CD with one of the CD's that came with my laptop that contains all of my device drivers. It found one compatible driver for the ATA/ATAPI Controller, and despite selecting it and hitting next, it didn't work.
2. I took the service tag from my laptop, downloaded each and every driver that it's associated with, burned it to an .iso, and swapped THAT out when I tried to install. Again, nothing happened.
3. I mounted the .iso onto an 8GB Cruzer and made a bootable flash drive. Upon trying the install again, I had the same problem.
4. I tried to bu... Read more
Try extracting the ISO to Vista desktop to run Setup from there.
You can locate the driver in Vista's Device Manager SATA controller Driver info tab.
The fact that it would duplicate the error for USB flash install sounds like a malfunction.
Try removing 2 gb of RAM.
Check BIOS version to see if you have the latest.
Checksum the HASH of the ISO you downloaded to confirm it here: http://www.mydigitallife.info/2009/0...vd-iso-images/
Hi,
My event viewer keeps reporting the following warning:
The driver \Driver\WUDFRd failed to load for the device USB\VID_05AC&PID_1297&MI_00\0.
What's wrong? How do I solve it?
My system is a Hebrew Win7 OS, operating an English GUI/
According to microsoft you can ignore as long as everything works.
http://support.authentec.com/KnowledgeBase/KBview/tabid/843/ArticleId/443/WUDFRd-failed-to-load-for-the-device.aspx
MY FIRST ERROR IS THE STANDARD PCI GRAPHICS ADAPTER (VGA)IT SAYS IN MY SYSTEM CONTROL.
DEVICE TYPE-DISPLAY ADAPTER-MANUFACTURE-STANDARD DISPLAY TYPES-HARDWARE VERSION-122
MY COMPUTER DISPLAY DRIVER WILL NOT WORK WITH MULTIPLE DISPLAY SUPPORT THAT I NEED A DISPLAY DRIVER THAT WILL WORK WITH MULTIPLE DISPLAY SUPPORT.
AND THAT THIS ONE WILL WORK IF I GO TO THE MAIN ADAPTER TO FIX THE PROBLEM BUT IM SO NEW TO THE COMPUTER I DONT KNOW WHERE TO FIND THE MAIN TO FIX THE PROBLEM.
AND THE SECOND ERROR SAYS USB ROOT HUB-DEVICE UNIVERSAL BUS CONTROLLER HARDWARE VERSION-NOT AVAILABLE-DEVICE STATUS-THE NTKERN DEVICE (LOADERFOR THIS DEVICE COULD NOT LOAD THE DEVICE DRIVER CODE 2 I HOPE THIS IS ENOUGH INFORMATION TO BE ABLE TO HELP OH ALSO I AM USEING ONLY ONE MONITOR NOT DUAL THANK YOU SINCERLY KIKILEE42
[tsg=welcome][/tsg]
hello, and welcome to the forums!
You need to first change the caps to regular letters...
thanks....Your computer is missing video adapter drivers.
Please post the make, model of this computer. And version of Windows you are using.
And if you know it, or have some paperwork that might show you, the make and model of the motherboard in it.
The USB problem is fixable too, when we get the info back from you.
It sounds like the video card you have supports multiple monitors...but the driver wants to be included, too- whether it needs to or not. Do you use any USB devices, like camera, scanner, printer, hard drive, burner, modem now?
I've had a few problems with this laptop and I've just about had it! The laptop restarts on its own, gives a few .dll errors and when I try to get a RootRepeal scan to post it gave me an error that it couldn't load my driver. I'm also having a problem installing Windows Updates. I troubleshooted it according to Windows Help and it still didn't help.DDS (Ver_09-07-30.01) - NTFSx86 Run by repoman at 0:46:16.54 on Sun 09/06/2009Internet Explorer: 8.0.6001.18813Microsoft? Windows Vista? Home Premium 6.0.6000.0.1252.1.1033.18.2038.937 [GMT -4:00]AV: AVG Anti-Virus Free *On-access scanning enabled* (Updated) {17DDD097-36FF-435F-9E1B-52D74245D6BF}SP: AVG Anti-Virus Free *enabled* (Updated) {17DDD097-36FF-435F-9E1B-52D74245D6BF}SP: Spybot - Search and Destroy *disabled* (Updated) {ED588FAF-1B8F-43B4-ACA8-8E3C85DADBE9}SP: Windows Defender *enabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}============== Running Processes ===============C:\Windows\system32\wininit.exeC:\Windows\system32\lsm.exeC:\Windows\system32\svchost.exe -k DcomLaunchC:\Windows\system32\svchost.exe -k rpcssC:\Windows\System32\svchost.exe -k LocalServiceNetworkRestrictedC:\Windows\System32\svchost.exe -k LocalSystemNetworkRestrictedC:\Windows\system32\svchost.exe -k netsvcsC:\Windows\system32\SLsvc.exeC:\Windows\system32\svchost.exe -k LocalServiceC:\Windows ... Read more
Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more
2 more repliesHello, i installed Windows 7 prof 64 bit on a Lenovo G500s. Now there are 3 unknown devices, all of them root/LenovoVhid.does anyone know which drivers are missing? thx
Solved!
Go to Solution.
hi TBBT,
Welcome to Lenovo Community Forums!
Please check under Control Panel / Uninstall a program if you have Lenovo Energy Management / Power Management Software, Uninstall that.
Install this one
Lenovo Energy Management
Let me know your findings!
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
Hello Guys I need your help in my laptop Graphics error.I uninstalled my AMD graphics card recently from control panel.Now i am trying to install the drivers and i have downloaded my graphics card driver from www.amd.com .But when the drivers installing there is a error message coming that is "failed to load detection driver".Please Help Me.
My Laptop is HP Probook 445 G1.
One more thing guys.My graphics convert into Standard VGA Graphics.
Hello everyone. Hope you are all doing good today and able to beat the heat on this very hot day. I have this really old laptop HP Pavillion dv6000. Originally it came with Windows Vista installed back when Windows Vista was first released but eventually I upgraded the laptop to Windows 7. Everything was fine and working until recently where the laptop has no sound. I try to install the sound driver from the HP website and it says "driver installation failed: could not find the device for this driver." No matter what I do I cannot get sound on this laptop. If I go to YouTube and watch a video the video plays just fine but with no sound. When I click on the sound icon next to the time on the desktop bar a window pops up that says "troubleshooting has completed" Problems found: "Hardware changes might not have been detected." I am not sure what is up with this or how to fix it but any help is appreciated thanks.
A Vista laptop likely doesn't have Win7 drivers written...try re-installing the originals from the Driver CD and reboot...Plus it's likely you are trying nVidia or AMD drivers gettin it to work which is a no-no on a laptop....
6 more repliesI turned off System Restore in order to run Superantispyware and when I tried to turn it back on ,,System Restore encountered an error to enable/disable one or more drivers failed to load. Restarting did not help. With some help by googling my problem i was lead to event manager and found errors at the time I tried to turn System Restore back on. "The following boot-start or system start driver failed to load" It listed nvatabus and nvraid. I have ran Superantispyware with System Restore off9because I cannot get it turned back on) but I have not tried it in safe mode. Should I try running it in safe mode or do you have any other suggestions or reasons why these drivers will not load? Thanks a bunch for any help you can give me with this!!!
When i start my computer up I get the message Error 7323 1 or more network drivers failed to load.
If you are networked then you have trouble beyond my experience.If not, then which Windows are you running 95-XP?Try Google with error+7323 and see what turns up......and maybe my posting will encourage someone with wider knowledge to help you.
7 more repliesHi, I have installed win7 x64 on my z710 and installed all the drivers I found on the support page. I still have an unknown device in my device manager. Name is root\LenovoVhid. It seems it came when I installed the Lenovo Energy Manager. Tried to uninstall and install again, didn't changed a thing.Device manager also tells me that Lenovo ACPI-Compliant Virtual Power Controller driver is missing or damaged Help me please
hello, can you please help how to get this driver? im format using windows 7
hi fross,
Welcome to Lenovo Community Forums!
Open Control Panel Uninstall a Program and uninstall (Anything that shows: Lenovo Energy Managent / Energy Manager / Power Management )
Now download and install these
Lenovo Energy Management
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
dear all, i have bought Lenovo z500. after win 7 prof x64 installation i could not install one driver. "unknown devise" ID: root lenovovhid. please sombody can help? thanks Lekso
Solved!
Go to Solution.
Hi Lekso
Welcome to the Lenovo Comunity Forums
For that particular device, please install the camera driver for Windows 7. I have shared te link below.
Camera Driver (AzureWave, Bison, Chicony, D-max) for Windows 7 (32-bit, 64-bit):
http://download.lenovo.com/consumer/mobiles/1hca01ww.exe
Best Regards
mtnzkn
Any suggestions on what to do about this?
Updating the driver didn't pan out, neither did uninstalling and rebooting (driver installation failed on reboot). Drive was working before. I know this can be solved; seen this before on somebody else's computer a year ago. On the other hand, maybe the driver isn't compat with 64bit Ultimate--but it was OK under 32bit Home Personal.
Correction. The drive in question isn't a CD drive. It's a DVD drive.
20 more repliesHas anybody been able to fix this warning message that came with W8? Every machine I have running W8.1 gets a couple of these warnings at boot time. This system ASRock Z77 OC Formula/3770K seems to get a triple dose of the warnings. I have tried the "Fix" of setting the startup to "Automatic" for "Windows Driver Foundation" but that had no effect. I do have a USB Keyboard and Mouse connected to the system but then who doesn't these days. I know it is just a warning message and probably has no effect on the system but.... I'm so close to having a clean event log at boot time. Any next step suggestions would be appreciated. Maybe W8.1.1 will fix?
I used to see this, but I don't any more. I don't remember what I did to fix it, it was a while back.
But I have the service set like this, so maybe that was it:
wudfsvc = Manual start
I keep getting the following message which I don't understand:
" Output Firewall
Output Firewall
Failed to load Output Firewall netwark operation driver.
Output Firewall functionality is limited: failed to load AFW.SYS driver."
I'm using the free Outpost Firewall which I downloaded from the Majorgeeks site.
syrk
Go here and see if this helps.
http://www.outpostfirewall.com/forum/showthread.php?t=22526
I just bought the Nikon Coolpix L22 digital camera. I installed their software and when I connect the camera via USB port I receive error "MTP USB Device failed Nikon DSC Coolpix l22-PTP.
I am running Windows 7, 64 bit, 8GB RAM, AMD Athlon Dual-Core processor 7550, 2.50 GHz
Hi,Try the Troubleshoot compatibility, and see does it works with XP Because some programs(drivers) doesn't work with windows 7 and worked with windows xp...You have the user manual for that model hereHope this help Max
4 more repliesHello all I am having issues after fresh install of win 10 help would be appreciated on this fix please if you can point me in the right direction for updated device drivers for this error I have no idea how to repair this screenshots attached below pc also shuts down randomly while playing games I hope this is just a power supply issue and nothing more such as motherboard because on my +5 volts in bios reading it shows 10.200 which is abnormal
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{7701c354-960c-11e5-9bc2-806e6f6e6963}#0000000000100000.
Hello all I am having issues after fresh install of win 10 help would be appreciated on this fix please if you can point me in the right direction for updated device drivers for this error I have no idea how to repair this screenshots attached below pc also shuts down randomly while playing games I hope this is just a power supply issue and nothing more such as motherboard because on my +5 volts in bios reading it shows 10.200 which is abnormal
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{7701c354-960c-11e5-9bc2-806e6f6e6963}#0000000000100000.
Hello!I have notebook Lenovo ideapad 100-15IBD 80QQ.I install all driver from support page Lenovo for my OS (Windows 7 x64)but left one Unknown Device ROOT\LENOVOVHID.Where can I get a driver for it?Thank you!
Welcome to the Lenovo Community !
The most common way to resolve that driver problem is to install the Lenovo Energy Management driver. Unfortunately in your situation there are no Energy Management (Manager) drivers available for Windows 7. In reviewing the available downloads for your model, Energy Management (Manager) downloads weren't available until Windows 10 was released. I'm assuming that your 100-15IDB was originally a Windows 10 machine on which you reverted back to Windows 7?
I've spent 3 hours trying to find the drivers for this. Looked online, any gurus help me please? Ran ThinkVantage updates, Irks me it doesn't find it automatically. I have a t520. if it's an update for the AMT, i cna't find it on the drivers pages, and lenovo removed direct links from URL's, so I don't know where to go from here.
http://support.lenovo.com/en_US/downloads/default.page?
3 more repliesI can't seem to get Windows 7 SP1 to load a driver for an HP printer that is on my home network. My laptop sees it but won't let me make it the default printer or load a driver so that I can link to it wirelessly. I restored my laptop back to windows 7
because Windows 10 was moving too slow. I only have 4gigs of memory, and windows 10 probably runs better with 8gigs of memory.
I have this previous problem... you need not read this for this current problem though
http://www.techspot.com/community/topics/bsod-upon-non-safe-mode-booting.212365/
I run on Windows 7 Home Premium 64-bit.
I want to install a newer update on my ATI graphics video driver. So I downloaded the one that suites mine which is AMD Catalyst Software Suite Omega (14.12) (for Radeon HD 6000 series) and during installation it says "Failed to load detect driver" and stops. Now I don't know what to do.
This is my first time downloading this so there are no programs like this in my "currently installed programs". I tried uninstalling the driver in the Device Manager but it just reinstalls back(when I scan for hardware changes). Thanks for the reply!
Is this a desktop PC or a laptop?
the motherboard is an msi 760Gm-E51
I went to msi website and downloaded the drivers for the motherboard because the system was crashing. I thought it was probably caused but the graphic driver but when I uninstall the driver and tried to run the ccc install again I still get failed to load detection driver. I tried using ddu to totally uninstall the current graphic driver but that didnt work.
I dont know what else to try to get this computer working
Any help will be great thanks in advance.
Did you try the Factory install disks.? I only downloaded a few drivers once & it messed up my Win7 PC. I am sure you will get help from one of our great Tech Gurus on this forum.
"OMCI system driver failed to load on start up." Source: Service Control Manager.
I have had this error message appear repeatedly over the past 2 months or so.
More recently the following also fail to load:
PCIIde
ViaIde
Windows (XP SP2) also often fails to start, sometime failing after the Windows logo screen has run, sometimes it doesn't get that far. Hitting the power and re-trying works...
Any advice appreciated.
Kservice
and
PC tools Anti-Virus Engine (now uninstalled)
Also have frequently hung on starting.
Another recent error:
"The Messenger Sharing Folders USN Journal Reader service service failed to start:
...The service did not respond to the start or control request in a timely fashion. "
Another recent error
"An error was detected on device \Device\Harddisk0\D during a paging operation."
and
"The device, \Device\Scsi\JRAID1, did not respond within the timeout period."
Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 °C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
MICRO-STAR INTERNATIONAL CO.,LTD P55-GD65 (MS-7583) (CPU 1) 35 °C
Graphics
SyncMaster ([email protected])
ATI Radeon HD 4770 (XFX Pine Group) 51 °C
Hard Drives
932GB Western Digital WDC WD1001FALS-00J7B1 ATA Device (SATA) 37 °C
Optical Drives
HL-DT-ST DVDRAM GH22NS50 ATA Device
Audio
Realtek High Definition Audio
Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 °C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
MICRO-STAR INTERNATIONAL CO.,LTD P55-GD65 (MS-7583) (CPU 1) 35 °C
Graphics
SyncMaster ([email protected])
ATI Radeon HD 4770 (XFX Pine Group) 51 °C
Hard Drives
932GB Western Digital WDC WD1001FALS-00J7B1 ATA Device (SATA) 37 °C
Optical Drives
HL-DT-ST DVDRAM GH22NS50 ATA Device
Audio
Realtek High Definition Audio
Have tried to resolve issue with Canon powershot S50 connected by USB no longer functioning with W7.
On occasions the only response is the pop up message driver device failed to install.
The camer is recognised under " Device and Printers" When I trouble shoot response is to visit manufacturers site and download driver - not required under Windows compatibility listing.
Have gone to Device Manager and removed all reference to Canon Camera under Portable devices but get same re... Read more
I have tried to fix this issue. I have Mobile Intel 965 Express Chip Set Family showing the Yield sign. I keep getting the Device Driver Failed to start and the picture is distorted and make the computer very slow. Is there a fix?
Thanks
I am trying to get rid of event viewer errors and warnings at bootup. This one still eludes me. It appears to be a driver error related to my Epson RX680 printer. Can someone give me a few tips on how to narrow it down further?
"The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_EPSON&PROD_STYLUS_STORAGE&REV_1.0 0#9&2856B3B7&0&070E018870865F0000&0#"
TIA
What have you already tried to fix the issue? Have you tried looking for an updated driver from epsons website?
3 more repliesI'm working with a Dell Dimension C521 PC. It came with a PCI-Express video card which apparently has failed, yet the motherboard itself has on-board video. The system will boot using this video output (as opposed to the card which produced nothing) but when it finally gets to windows the auto-detect driver routine kicks in and begins to detect the video card, prompting the user to "Continue Anyway" to finish installing unsigned drivers. Unfortunately this event takes place in front of the installation of the USB keyboard and mouse (times like these I wish it had PS/2 ). Anyway, whether I boot up into Safe Mode or normal a prompt comes up about installing drivers for the on-board chipset. I can't interact with it because the driver install routine for the keyboard/mouse becomes interrupted.
Bump. I've been thinking... the only way I think this can be fixed is if I boot from a Linux CD or something similar and delete a particular set of drivers for this video card. It can't prompt you to install any drivers if they don't exist, right? But I don't know where to go to delete such files and prevent them from automatically trying to install themselves. Any ideas?
I have a Toshiba satellite C-50D-a-12x with windows 8.1 and often it crash and sometimes arrest.
In the events log every time an advise appears:
Nome registro: System
Origine: Microsoft-Windows-Kernel-PnP
Data: 22/01/2014 12:45:37
ID evento: 219
Categoria attivit?:(212)
Livello: Avviso
Parole chiave:
Utente: SYSTEM
Computer:
Descrizione:
Impossibile caricare il driver \Driver\WudfRd per il dispositivo SWD\ SensorsAndLocationEnum \ LPSensorSWDevice.
<System>
What i have to do ???
Thanks
Hi
It looks like the driver / service WudfRd causes the system crash.
After googling around it seems that other people have had the similar system problems.
The WUDFRd is a service and it is called "Windows Driver Foundation - User-mode Driver Framework" which is also responsible for USB devices
I would recommend you to disconnect all the devices you had connected to the notebook?s USB ports. You should also uninstall all USB hubs which appear in device manager and then reboot the notebook.
You should also go into services .msc and look for Windows Driver Foundation - User-mode Driver Framework. Check the status of this service. Usually it should be set to manual.
Under "Status" it could be set to off.
If you pluggin a USB device the status change to "Started".
Try to changed the startup type to "Automatic". Then shut down the notebook and restart. Then check the status again to see if it would be still set to automatic.
I recommend you to test and to monitor the notebook functionality without connection of any USB devices. Then plugged in an USB device again and check if an error would appear or system would crash.
Good day to you Sirs.I just bought a Lenovo G510 running Windows 7 64bit and I am missing the ACPI\VPC2004 driver and root\LenovoVhid driver. Well i actually have first one on cd, but it keeps failing to install correctly. I checked files here http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/ACPI-VPC2004-driver/td-p/948967and herehttp://forums.lenovo.com/t5/Lenovo-3000-and-Essential/G500s-missing-driver-LenovoVhid/td-p/1359473but sadly it didnt work out. Hope you can help me with this.
hi Mikasa,
Welcome to the Lenovo Forums.
Can you try this driver:
Lenovo Energy Management
version 7.0.3.421.4MB
Let me know how it goes.
Regards
problem : windows can not load the device driver for this hardware.
the driver may be corrupted or missed.(code 39). Have Vista Home Premium.
I recently had malware installed on my computer called Antispycheck and I just got it removed but now my disk drives are missing from "My Computer." When I go to "Device Manager" all three drives show up, but they have the exclamation sign next to them, when I right click on it and go to properties, it says "Windows cannot load the device driver for this hardware. The driver may be corrupt or missing. (Code 39)." I uninstalled the drivers and restarted Windows, Windows found them and installed them, however, they still did not show up in "My Computer" and still had the same error message under "Device Manager." Any help with this problem will be greatly appreciated. Thanks in advance.
You can run this little app. by Doug Knoxhttp://www.dougknox.com/xp/scripts_desc/xp_cd_dvd_fix.htmOr you can edit the upper and lower filter keys after backing up \your registryhttp://support.microsoft.com/kb/314060 http://support.microsoft.com/kb/315345http://www.geekstogo.com/forum/index.php?a...&showfile=8
2 more repliesHello,
Can someone please help me find out what driver or service 'ksop' is? Or, how to fix it?
I've been troubleshooting my Windows 7 laptop to try and find the cause of random, sudden shutdowns and a bunch of 7026 and 7001 errors. This 'ksop' error pops up every time I reboot.
I tried clean-booting, SFC, CHKDSK, etc, but I can't narrow down a service as the culprit. I tried Googling 'ksop' but I couldn't find anything that explained what it was, or a record of anyone else asking about this issue.
Anyone out there have any idea?
Here's the event info:
Log Name: System
Source: Service Control Manager
Date: 3/22/2015 12:59:37 AM
Event ID: 7026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: *************
Description:
The following boot-start or system-start driver(s) failed to load:
ksop
System
- Provider
[Name] Service Control Manager"
[Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}"
[EventSourceName] Service Control Manager
- EventID 7026
Qualifiers 49152
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8080000000000000
- TimeCreated
[SystemTime] 2015-03-22T07:59:37.826903400Z" />
EventRecordID 220852
Correlation
- Execution
[ProcessID] 548
[ThreadID] 620
Channel System
Computer *********
Securit... Read more
So far all I've been able to find out is that 'KSop' is a pool tag, and it's associated with something related to Windows 7. I still don't know what driver it's for, how to find out, or how to fix.
If anyone has any ideas, clues, or suggestions, it would be greatly appreciated. Please, I'm at my wit's end!
Scenario:
CMOS battery died. XP got corrupted somehow. I d/l'd Windows 7 Ultimate ISO from MSDN and made a bootable dvd. Installed Windows 7 from the DVD. When I boot up now, I get the following error:
Windows failed to load because a critical system driver is missing or corrupt.
Status: 0xc0000098
File: Windows\system32\DRIVERS\ql40xx.sys
Can anyone shed some light on how to resolve this?
Thanks,
Evan
: QLA40XX iSCSI Host Bus Adapter
Description: QLogic iSCSI Storport Miniport Driver
Company: QLogic Corporation File size: Various
Go to website of that company and try to download driver.
You may have to use another compter and download to a finger drive etc.
Once you have it, you can boot from the Windows DVD and try to install.
Alternatively, you can go to device manager, under view, check show hidden drivers. If you find one with a yellow marker, you can try to dowload from there.
Hi all.
My pc has been hanging randomly and I have to use the power button to shut down/restart.
I've checked in events and there is this error which seems to be causing the problem as the time matches with the hang time.
I posted another topic with another bsod issue in the bsod section, and I was told to run some tests.
A day or so ago, I tried and changed Driver Verifier settings as were instructed in one of the threads here which also mentions that it is an iffy thing to do.
Anyway, I lost windows and could not start again, luckily I had a backup made, and after formatting my HD, loaded it on to it. This error seems to be a driver issue (Screenshot).
Should I go down the Driver Verifier route again ? To be honest I don't want to. If I lose windows again it would be very frustrating.
I've run the following tests so far here
I have no driver issues showing up in Device Manager, so that looks ok.
Please advise. Thank you.
I looked around and found a reference to Mother Board Monitor which at least sounds like it might be the culprit.
Do you have that application installed, or some other temperature / fan speed monitoring sw?
Alex Van Kaam, the author of Mother Board Monitor, stopped development in 2004 citing his frustration getting technical information from mfgrs.
Anyway, if you have Mother Board Monitor installed, remove it. If you have other monitoring sw, post what you have and someone might know more about that sw (MBM source used?)
If you haven't tried a Clean Boot, here's a tutorial you can follow:
Troubleshoot Application Conflicts by Performing a Clean Startup
Bill
I am attaching a screen shot of the Kernel-PnP Event 219 that suggests that a device driver is failing to load at start up. I have been receiving this message for about three weeks and can't relate it to any particular event on my computer. I have trawled the net and had a look at Device Manager but I can't ascertain which driver is not loading and presumably needs to be updated.
I downloaded some software called "Driver Manager" and that has identified 28 out of date drivers. To correct the problem I have to pay a subscription that I can not really afford. Can someone help me identify which driver is causing the problem please?
Judesman, I don't recommend paying a subscription as you can get the drivers yourself. That seems to be a plug n play device, look ath the user action section in this link Kernel ID 219
9 more repliesHello all.
After getting my FF7 set from a friend a couple weeks ago, nostalgia kicked in and I got his FF8 copy also but I'm having problems with it. I also have no problem playing FF7.
Installing it goes along with no problems till the end, where it says "Failed to load custom driver" and it goes to desktop. I try to start the game and same thing. I got the 1.2 patch but am unable to install EAX because again it says failed to load custom driver. What is going on?
Windows XP Home Edition
Pentium 4 2.2 Gz
256 RAM
Intel 82845G/GL/GE/PE/GV Graphics Controller
I have seen this event several times in the Event Viewer program. Is it something that I should be concerned?
Do you have a portable drive or flash stick plugged in during this time?
Please post back a screenshot of Disk Management - Post a Screen Capture Image
showing fully scrolled, after this error next appears and without touching anything else.
my friend already finished installing windows 7 ultimate..it works well but he always get the error message "SlowDownCPU Failed to load hardware monitor driver" each time when he start the computer.he already looked at his device manager but there is no indication that his driver is missing or error..but the most important thing, there is no problem with his computer n it functioning well..so anybdy can help me? what the message is all about? how to solve it..or if cant solve it,then how to turn off that error messge..he use desktop, n i not so sure about his computer specification..thnks
SlowDownCPU.exe Windows process - What is it?
Quote:
Important: Some malware camouflages themselves as SlowDownCPU.exe, particularly if they are located in c:\windows or c:\windows\system32 folder. Thus check the SlowDownCPU.exe process on your pc whether it is pest.
In your case, I don't think its a virus as stated above, as if the virus was doing anything its designed not to notify you about it.
First, open the start menu, and in the search box, type in
Folder Options
and press enter. Navigate to the 'View' tab. Check 'Show hidden files and folders'.Then tell him to navigate to C:\Windows and in the search box, type in 'SlowDownCPU.exe'. See what results come up. If there are none, there is no virus affecting system files. If there are results, we will guide you step by step.
EDIT: To stop the program starting up at boot, in the search box type
msconfig
and press 'Ctrl' + 'Shift' + 'Enter'. In the 'Startup' tab, uncheck anything to do with 'SlowDownCPU'.
