Computer Support Forum

Z580 ....No oneKey Theater software for windows 8?

Question: Z580 ....No oneKey Theater software for windows 8?

this software for windows 7 doesn't work on windows 8 .. isn't there one for windows 8 ?













Solved!

Go to Solution.

Relevance 100%
Preferred Solution: Z580 ....No oneKey Theater software for windows 8?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Z580 ....No oneKey Theater software for windows 8?

Hi And welcome to the community!!Please download the driver from herehttp://driverdl.lenovo.com.cn/lenovo/DriverFilesUploadFloder/36074/Win8_OneKey_Theater_x64.exeHope this works!!Regards





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

5 more replies
Relevance 102.09%

my z580 onekey theater sensor is working but but onekey theater "smart" option is not working. Which version of onekey theater i must using? for windows 7 64 bit.













Solved!

Go to Solution.

Answer:(Z580)Onekey theater

Hi scaryWelcome to the forumsI would suggest you try updating the onekey theatre drivers from belowhttp://driverdl.lenovo.com.cn/lenovo/DriverFilesUploadFloder/35715/Win7_Onekey_Theater.exeSorry it is in chinese but i wasn't able to find in us site.Use winrar to extract the setup. The setup would be in english.Regards





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

4 more replies
Relevance 100.86%

My onekey theater isn't working, whenever I press the sensor/button on my laptop it lights up but doesn't really do anything else. And also it's icon stopped showing on the taskbar for some reason (even though It's enabled at startup).













Solved!

Go to Solution.

Answer:OneKey Theater not working (Z580)

Dear Jirochou
 
Welcome in Lenovo forums
 
Please use the below link to download and install the latest update of the Power management application that should be installed on your unit so that One key Theater can be working , knowing that if the application already installed please uninstall it and install it once you download it ,
 
Link : http://support.lenovo.com/en_EG/downloads/detail.page?DocID=DS031269
 
Please let me know
 
Thanks
Alaa





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

7 more replies
Relevance 88.56%

I have updated my Ideapad Z580 to Windows 8 and  noticed, that some features are not working with Windows 8, such as Power Managment, OneKey Recovery and Theater and some others. I visited driver download page and found some drivers, that helped me there. But I didn't find OneKey Recovery and OneKey Theater utilities. So, where I can download these utilities for Windows 8?

Answer:OneKey Recovery and OneKey Theater are not working for Windows 8

For windows nowhere but i have instaled OKR for w7 and i tried to backup current state and i am done but i did not test restore process yet..:/





-------------------------------------Lenovo IdeaPad U410, Core i7 - 3517U, 8GB RAM 1600 MHz, 1 TB + 24GB SSD HDD, BIOS: 65CN15WWWindows 7 Home Premium -> Windows 8 Pro RTM (upgraded without problems)

1 more replies
Relevance 81.18%

Help!I have Y450 with Windows 7. I tried downloading and installing the drivers from the support page, but when I tried accessing the desktop navigator, it doesn't work and caused bluescreen a few times. Onekey recovery doesn't work and neither does the onekey theater nor the dolby shortcut. What should I do? Am I missing some drivers?

Answer:Y450/desktop navigator/ onekey recovery/ onekey theater

have you downloaded the right driver? see to it that you have chosen the right driver including the bits...(32 or 64 bits). in my experience, the most common cause of blue screen is due to wrong device driver...try this driver for your desktop navigator: Windows7 64 bits (Desktop navigator), Windows7 32 bits (Desktop nivigator) i also have y450 C2D P8700 running 64bits windows 7 ultimate, it runs smoothly...

4 more replies
Relevance 78.72%

I can't find Onekey Theather on Windows 8 (64 bit) for Y480.













Solved!

Go to Solution.

Answer:Y480 no Onekey Theater for Windows 8

I can't find Onekey Recovery too.

2 more replies
Relevance 77.08%

I miss the surrond sound effect. I finally figured out how to do a clean install of Windows 8 after screwing up and deleting my recovery partition. I had an extra copy of Windows 8, so I'm back in business. I had to create a Windows 7 flash drive, and I had to upgrade to 8 through Windows. Windows 8 would not do a clean install because it kept reporting an invalid key. I'm sure it was extracting the key from the motherboard.













Solved!

Go to Solution.

Answer:Anybody have a link to OneKey theater download for Windows 8 64 (Y500)

Here is the link: http://driverdl.lenovo.com.cn/lenovo/DriverFilesUploadFloder/36074/Win8_OneKey_Theater_x64.exe

2 more replies
Relevance 74.62%

Hi there,
 
I just upgraded to Wndows 10 Home from Windows 8.1; everything went smoothly except for the fact that Dolby Home Theater v4 does not work. I had to reinstall it using the .msi file found in the Realtek Audi folders. I chose v4 over any of the other versions because I like how I can tune the equalizer to my liking and different uses. Anyways, the regular audio works and Dolby is turned on but there is no activity appearing on the equalizer and my music does not change once adjusted. Had this problem when doing an optional audio driver update in the past when I was running 8.1. I do not have the option to rollback the driver after upgrading to Windows 10. Does anyone have a solution to this issue or know what the correct Realtek driver is to make Dolby work? This is one of my favorite features of my laptop and I really want it up and running again!
 
Thank you in advance!
 
JakeStiebs
 
My unit: Lenovo Ideapad Z580 running Windows 10 Home with Realtek Audio Driver 6.0.1.7535
 
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity













Solved!

Go to Solution.

Answer:Z580 - Dolby Home Theater v4 not working after upgrading to Windows 10

For those of you still struggling to find the solution to get your Dolby Home Theater v4 equalizer back on Windows 10, you are in luck. Warning: I highly reccomend cresting a backup before starting this process in case anything goes wrong. There are multiple ways to do that and I usually create a restore point and a system image.Step 1: Install Dolby Home TheaterIf you know that it is installed already skip to Step 2. Look under the control panel to see if it is listed there, if it is go to Step 2, if not go to C>Drivers>Realtek Audio Driver>PCEE4>DolbyHomeTheater.msi and double click and install the software. Restart your computer!Step 2: Uninstall Realtek High Definition Audio speaker driverGo to the device manager and expand Audio inputs and outputs. Right click and hit uninstall where it says: Speakers (Realtek High Definition Audio). Hit scan for hardware changes. If it still shows the speakers listed, right click and uninstall again. Hit scan for hardware changes and it should be gone. Do not restart your computer!Step 3: Install the Realtek High Definition Audio Driver that is compatible with Dolby Home Theater v4Go to D>Drivers>Audio>Setup.exe and double click and follow the process. If it asks for a restart after uninstalling the driver go ahead and do so. Then it will install the compatible driver and ask for a restart again to finish, do it.Step 4: Install DolbyGo to this website:http://www.thewindowsplanet.com/3765/dolby-home-theater-missing-a... Read more

5 more replies
Relevance 74.62%

Where can i get Dolby Home Theater v4 for Windows 8 64bit?













Solved!

Go to Solution.

Answer:IDEAPAD Z580 - Dolby Home Theater v4 for "Windows 8" 64Bit

In drivers package... After unpack ..in drivers mainfolder is dolder for Dolby home t. v4





-------------------------------------Lenovo IdeaPad U410, Core i7 - 3517U, 8GB RAM 1600 MHz, 1 TB + 24GB SSD HDD, BIOS: 65CN15WWWindows 7 Home Premium -> Windows 8 Pro RTM (upgraded without problems)

8 more replies
Relevance 70.52%

Hi, I'm looking for the program preinstalled OneKey Theater, It has been deleted by mistake. my notebook Y50 is new 2015, I have the right to get back the program for free? Someone can give me the link to download this program?thanks

Answer:ONEKEY THEATER I want to reinstall it HELP for Y50-70

Razenstar wrote:Hi, I'm looking for the program preinstalled OneKey Theater, It has been deleted by mistake. my notebook Y50 is new 2015, I have the right to get back the program for free? Someone can give me the link to download this program?thanksNormally it is part of the audio driver. So try reinstalling the audio driver. This is the link for Win 8.1.

9 more replies
Relevance 70.52%

unfortunately i lost my original recovery and i was forced to install a normal operating system ( win 8.1 )and i installed the all drivers except Onekey theater it gives me an error message " catastrophic failure "- how can i solve this proplem ??- can any body tell me any method to restore my original recovery or can  i download it from Lenovo ??

More replies
Relevance 70.52%

Hello Everyone,  Does a Lenovo Idepad have a Onekey Theater Button?










Solved!
Go to Solution.

Answer:Onekey theater Button

Dear Boniface_1765
 
Welcome in Lenovo community
 
Kindly be informed that the One key Theater Button is not available in all models , so please let us know if you are concerning about a specific models or all models 
 
Thanks
Alaa



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

5 more replies
Relevance 70.52%

How do i reopen onekey theater? I tried to manually open it from the onekey theater directory, but no response. I tried to restart my computer but still wont work. I did not suspent it from startup. This laptop is new and this software is working fine up until I accidently pressed the "hide" option, and now its icon is gone from the taskbar.

Answer:How do I reopen Onekey Theater??

HiWhich laptop do you have? And which os? Do you have the touch sensitive key for the OKT?By the way, you can try reinstalling it





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

2 more replies
Relevance 70.52%

Okay so i think the Onekey Theater isnt working because when i watch a video i dont see a difference and i did uninstall reinstall it so i dont see why it wont work... any idea becuase this has been boggleing my mind ever since i got the computer..

Answer:OneKey Theater problem?

did you activate one key theater by pressing the button?

8 more replies
Relevance 70.52%

First off lemme say I love one key theater It's like having an effects/filter mod on some of my games and it makes it looks super nice with the several options that being said it doesnt work on all games for some reason I cant get it to work on Black Ops 2 there's also another game i think where it doesn't work the audio and video doesnt alter at all after pressing the button is there a workaround or do certain apps disable such things 

Answer:OneKey Theater and certain apps

I dont thing it should work on new high performance games. You could try updating it but i dont gaurantee it as a long term/permanent solution. And i hope, you have tried changing settings by minimizing the game.





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

1 more replies
Relevance 70.52%

I just did a fresh install of win 7 on a ssd for my new y480 and I have been looking around but can not locate the download for the one key theater.  Can anyone point me into the right direction?

Answer:y480 onekey theater

Your driver section doesnt have the OKT. So try the one of y560http://download.lenovo.com/UserFiles/Driver/en/Downloads%20and%20Drivers/Y460&Y560/WIN7/IN12STW11WW5...





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

1 more replies
Relevance 70.52%

my computer is z580. OneKey Theater, Smart mode was working normal. I am using Gom player.it stopped working for gom player 2 months ago.in intelligent mode, i was open video in gom player, but nothing was changed. but, shortly before,I opened video in my gom player and video mode is automatically changed. I was very surprised.i have not changed anything, i am sure.i am not uninstall anything, i am not setup anything,i have not changed any settings. why have been this? previously, also i tried kmplayer, it wasn't working sorry for my english.

Answer:I don't understand, OneKey Theater?????

HINo problem about english, it is not your native language and no one is perfect in this world.Your problem, it happens because the intelligent mode automatically changes the quality accordingly, when you play videos or open images.





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

8 more replies
Relevance 70.52%

On y560p there is a special button to change OneKey Theater modes, but I also discovered that it can be changed by pressing Fn + Ctrl. It's annoying when I need, for example, to use Ctrl + Insert combination and since Insert key is actually a combination of Fn + F12 so in the end I have the OneKay Theater window pop up. Is there any way to disable OneKey Theater from using the Fn + Ctrl keys?Thank you!

Answer:y560p OneKey Theater

I believe there is no way then =(

1 more replies
Relevance 69.7%

I'm trying to find the onekey theater download for the z585.  After purchasing the laptop I threw in an SSD and did a full fresh install to get rid of bloat ware that lenovo puts on the system but I can't find the onekey theater anywhere. Also no matter what settings I use in the windows power management my laptop will not wake from sleep.  I have had to disable sleep but I don't care what anyone says, sleep mode should not be a "messes up more than it's worth" issue.  It should work.  Anyone know of any drivers updates or bios updates for the z585 that may solve this?

Answer:Z585 onekey theater download

For one key theatre please chech deivers sitehttp://www.google.com/url?q=http://support.lenovo.com/en_US/research/hints-or-tips/detail.page%3F%26...The sleep thing is a common problem faced by users installung ssd in z585 and appaeantly there hasnt been any solutions. You might want ro wait.





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

7 more replies
Relevance 69.7%

Hi All, I just bought a new Ideapad Y470. When i got home, I reformatted it and installed Windows 7 64bit. The laptop has no cd included so I checked and download the drivers in lenovo site. While downloading all the drivers for my laptop I don't see the Onekey theater installation software. I contact customer support via chat and they gave me the said software. But after I installed it, and tried to hit the Onekey theater button still there's nothng happening. Any solution for my problem?

Answer:Onekey Theater button no response

Up

3 more replies
Relevance 69.7%

While setting up my new compy, it appears I accedentally [removed/disabled] all the buttons at the top (onekey theater, volume adjuster) are there drivers anywhere that I may be missing, or settings that enble and disable these buttons?

Answer:Y570 - onekey theater/volume/etc. gone

re-install the drivers/software you un-installed.

1 more replies
Relevance 69.7%

I recently had to have the hard drive and motherboard replaced on my system... After reinstalling Windows and updating all the drivers, now I'm left wondering, WHERE is the download for OneKey Theatre on the y510p? Support told me that I had to send the computer back to have it installed... this is absolutely RIDICULOUS, as I paid EXTRA $ to have on-site service, therefore, I should be able to restore the operating system and other software that came with it, WITHOUT having to send it out and wait who knows how long for it to return, just for a simple software install..? Thanks!-Myke

Answer:y510p - Where to download OneKey Theater?

I don't have the Y510P model but based on my model, the onekey theater software is provided and located in the D drive. If you have erase the drive then your chance of restoring it is through OKR (factory restore) or through Lenovo. The program is not provided in the download site.

1 more replies
Relevance 69.7%

I have z 475.....driver  onekey theater is not working on win.8 (64 bit)....help me pleace....

More replies
Relevance 69.7%

Hey everyone I've been using my Lenovo Ideapad Y550 for 3 months now. My operating system is Windows Vista Home Premium 64 bit. Since yesterday I noticed my OneKey Theater button is not responding. When I press it nothing happens. I don't see a difference in sound and video quality either. All of a sudden it just stopped working. Also, when I increase/decrease the volume using the up/down buttons on the side of the laptop, the volume goes up and down but I dont see that bar on my desktop. Please help. I really can't figure out what to do. Thanks

Answer:Y550 OneKey Theater Not responding

try to install this, if it doesn't work, uninstall lenovo power management re-install it but make sure "utility" checked.

9 more replies
Relevance 69.7%

"detect the audio driver is not ready, you will not obtain enhanced audio performance." Realtek 6.0.1.6002 't installed .. After setting up the color of the screen when I press the button OneKey theater come alive, but the sound gives the error: "is not ready, advanced audio performance is not a driver detects sound.""Waves Maxx Audio"  disappear ?? I installed again, but did not fix OneKey Theater .. What should I do ..?Realtek 6.0.1.6002'yi kurdum.. kurduktan sonra onekey theater dŁ?mesine bast???mda ekran?n rengi canlan?yor ama ses hata veriyor :"detect the audio driver is not ready, you will not obtain enhanced audio performance."  Ayr?ca Waves Maxx Audio kayboldu..Onekey Theater'? tekrar kurdum ama dŁzelmedi.. ne yapmam laz?m..?













Solved!

Go to Solution.

Answer:Y550 - Onekey Theater's error ?

un-install one key theater, restart your computer and install it again.

9 more replies
Relevance 69.7%

Hi!I have a laptop lenovo y50-70. In program Onkey theater, nova button (next to power button) doesn't work.When I press the button is nothing happening. How to fix that?kind regardsMateusz

Answer:Onekey theater + Nova button

hi Mateusz
 
Welcome to the Forums.
 
When you pressed the OneKey Recovery button, is the computer turned off that time or are you login to Windows?
 
When the machine is powered off and you press the OneKey Recovery button, Recovery Boot Menu should show up.
   - Sample image
 
If the machine doesn't display any Recovery Boot Menu then it's likely that it's not finding the hidden recovery partition on the HDD or the OKR program is not properly bootstrapped to the system (this is usually the case if the machine is not preloaded with Windows 8.1).
 
 
Regards

2 more replies
Relevance 69.7%

Hi,
 
I've read forum and already tried to reinstal energymanagements and any other solutions but they won't work.
;SliveNav; and 'onekey dolby theater' (audio button) are working, but if i push 'onekey theater' there is no effect, some time ago if i pushed it screen was more brighter and sound was more effective.
 
When I'm trying to reinstall 'Onekey Theater' I'm getting communicate that in "c:\windows\installer" file named "onekey theater.msi" is missing and it can not remove old version and install new one.
http://i52.tinypic.com/9h3ozq.png
 
I've already tried with old drivers which were on my y550 when i bought it and with latest ones.
Please tell me how to make it work...it's very annoying.
 
Thanks in advance
 
 
link fixed.

Answer:y550, onekey theater won't work

try to download the one key theater from support page, un-install current ones, restart your computer and try again.( you can also try to re-install it with deleting onekey theater.msi, do not delete file, send it to recycle bin, try to re-install again )

3 more replies
Relevance 69.29%

Where Can I download or order a Boot Disc for my Z580?  It came with Windows 7, and PC World were offering a free upgrade to Windows 8.  I am currently unable to create a Factory Default Recovery Disc.  There is an error with the Onekey Recovery software in burning onto the DVD / Disc.  I have tried two different DVDs (4.7GB), and have tried a CD (740MB).  And I receive the same error about one fifth of the way through.The reason I am having to do a factory reset, is because my Wirless Network driver is not working, and the laptop no longer accepts external wireless USB dongles.  I can't get internet even with a wired connection.  It isn't to do with whether the wireless is switched on or not.  I've tried this.What is Lenovos policy about providing customers with the means to restore their Laptops?  In the past computer manufacturers / suppliers provided all the software and bootdiscs.Thanks













Solved!

Go to Solution.

Answer:Request for Boot Disc Z580 Windows 7. Unable to create bootdisc using OneKey Recovery 7.0

hi Timneedshelp,
 
Welcome to Lenovo Community Forums!
 
 Have you tried performing Recovery using the Recovery Button?
 
Turn off the system then press the small button like the one on the photo
And it should boot your system to a Recovery Like environment giving your options to restore factory back up,
     
 
If this one failed or not working, I suggest Calling Lenovo Technical Support in your location for a CD option,
 

 
Hope this helps
Cheers!





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 68.88%

For some reason OneKey Theater was not installed on my laptop when I bought it.  I have now updated my audio driver, uninstalled and reinstalled OneKey Theater.   Now, when I click on the icon I get this error message: "The program can't start because ActiveDetect64.dll is missing from your computer.  Try reinstalling the program to fix the program." That particular driver is listed in te same file as OneKey Theater so I'm confused why it's not reading it.  I already tried reinstalling the OneKey Theater program a second time but it didn't fix the problem.   What should I do????   Thanks! 

Answer:Y560p OneKey Theater error message

Nevermind.  I don't know what I did, but it works now.  

1 more replies
Relevance 68.88%

Anyone know if there is a way to make Onekey Theater automatically switch to "music mode" when using Spotify and the "intelligent" setting? It works well with iTunes and Windows Media Player. How do you add custom programs?

More replies
Relevance 68.88%

Hi, I have a y530 and was wondering if it's possible to remap the onekey theater touch buttons (jazz, pop, dance, classical, normal, userdefined programs,etc.)  to do some other stuff (like open up firefox).  I know its possible for the play/pause, stop, and tracks, but can't seem to do it for the equalizer buttons so far.  Anyone got any ideas if this is even possible? Thanks

Answer:Remapping onekey theater equalizer buttons?

try to change default programs or you can try this application

6 more replies
Relevance 68.88%

I disabled most of the stuff on system configuration, startup and i found out that the volume buttons and all are not working anymore. After i enabled all of the options available in system configuration, startup and restarted my computer, it didn't work as well.Help please!

Answer:Onekey theater and volume buttons not working

re-install power management.also, please, let us know which model of lenovo and operation system you have.

9 more replies
Relevance 68.88%

I have received my Y650 today - in 3 days flat! (I was impressed by the shipping time) I can't seem to activate the OneKey Theater.I must've downloaded it 5 times - how do you activate it? Then I popped in a dvd and it won't play it.It says that my "go.exe has stopped working" Any suggestions?

Answer:playback dvds and onekey theater (y650)

Thanks for not responding.No really, it was nice not having to come back to, "you idiot.."   I figured it out. I didn't realize those were buttons up top where the slide bar is .  I just thought they were decoration or something. As for the dvd player..I'm not sure why it said that "go.exe has stopped working".I put in another dvd and it played just fine *shrugs*.I'll be back if I get anymore weird messages like that.

2 more replies
Relevance 68.88%

Looks like the OneKey Theater button on my Y580 doesn't seem to work, right out of the box?  I've even tried reinstalling the software for it.  Anyone else have issues?

Answer:OneKey Theater Button Doesn't Work

HiWhich os are you having? And you reinstalled energy management and okt software also?Regards





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

1 more replies
Relevance 68.88%

Hey, I love the Onekey Theater Movie setting but sometimes it is a bit too dark during night scenes of shows. Is there any way to get the same great sound settings that the Movie setting uses in the Normal mode? Thanks!

Answer:Ideapad Y580 Onekey Theater Settings

You should use the intelligent mode option. It might help you as it self oprimizes.





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

2 more replies
Relevance 68.88%

Hello, I recently performed a clean install on my new SSD and now I cannot find OneKey Theater driver for Lenovo Y580 Windows 7 x64. Any ideas where I can download it?  Also my NumLock button doesn't seem to initiliaze when I start the operating system. It is not because of the system because numlock register is set to its regular 2 (init on startup) and Lenovo's BIOS is really poor so I can't set it up inside of it. Any ideas, hints how to make it work? It's getting pretty annoying. Thanks for any answer in advance,Simon. Interesting P.S.: I had to apply my warranty because my keyboard was damaged when I bought the laptop, so I contacted Lenovo Support and I created a new service order. The operator asked me what is the problem so I said: "My keyboard is damaged and numlock doesn't start when my OS starts." Her response was following: "I don't quite understand, if you are able to press it and turn it on, what's the problem then?" I guess I don't have to explain why I gave up convincing her that for me it IS a problem, and a pretty annoying one. I use a number password













Solved!

Go to Solution.

Answer:Y580 OneKey Theater + NumLock problem

here you go http://support.lenovo.com/en_GB/downloads/detail.page?DocID=DS028050 John.





Win7 Lenovo Ideapad Z580 i5-3210m HD4000 Win7 x64 8gb 1600MHz Samsung 830 256GB SSD

4 more replies
Relevance 68.88%

Hello all, my girlfriend owns an IdeaPad Y550, with the good ol' OneKey Theater toggle button. When the computer starts up, and whenever the OKT button is used, the display reverts to a color profile with a significant blue tint. I've tried all I can think of to fix this, without any luck. Anyone have a suggestion?

Answer:OneKey Theater Color Calibration Issues

can you upload any photo?

1 more replies
Relevance 68.88%

Hi all, I have an ideapad z470. Recently the buttons (or maybe the program itself) for the volume, onekey theater and Thermal management which are beside the power button has been a huge problem. Basically, the buttons would keep flashing as if someone pressed them and it would keep switching the volum on/off, higher/lower, change between display themes, between thermal management themes all on its own. Someone please kindly help, I would be super appreciative. Thank you!  

More replies
Relevance 68.88%

Hello. I'm using he Ideapad Y500. Recently I accidentally turned off my Onekey Theater in the icons area at the bottom right as shown in the image. I seem to be unable to turn it on in any way, even after setting its settings to show icon and notifications.  I searched around and I even tried to run it straight from C:\Program Files\Lenovo\Onekey TheaterWhen double clicking the executable found in C:\Program Files\Lenovo\Onekey Theater, nothing happens. It seems like the exe just does not work.  How do I make Onekey Theater appear in the taskbar at the bottom right again? I don't think I'll have to reinstall it, right? All I did was make the icon disappear (I didn't uninstall it) Thanks 

Answer:Onekey Theater Doesn't Run/Execute (Y500)

evertide wrote:Hello. I'm using he Ideapad Y500. Recently I accidentally turned off my Onekey Theater in the icons area at the bottom right as shown in the image. I seem to be unable to turn it on in any way, even after setting its settings to show icon and notifications.  I searched around and I even tried to run it straight from C:\Program Files\Lenovo\Onekey TheaterWhen double clicking the executable found in C:\Program Files\Lenovo\Onekey Theater, nothing happens. It seems like the exe just does not work.  How do I make Onekey Theater appear in the taskbar at the bottom right again? I don't think I'll have to reinstall it, right? All I did was make the icon disappear (I didn't uninstall it) Thanks To show the icon click the "show hidden icons" then click customized (see picture). Then click "restore default icon behaviors". 

9 more replies
Relevance 68.88%

I reccently updated my graphics and audio drivers and I noticed that OneKey Theater movie mode isn't working properly. Though the sound changes, the display changes take place for a second and then revert back to normal. Since then I have re-installed OneKey Theater and my old sound and graphics drivers but nothing is helping! HELP!

Answer:Lenovo OneKey Theater Issue -Z570

Hi, do you have a system restore point,you can revert to? Have you tried that? P.S Before any driver updating is done, please remember in the future to create a restore point, beforehand,so that you can easily reverse any changes if problems occur.

9 more replies
Relevance 68.88%

I reccently updated my graphics and audio drivers using DriverMax. But new sound driver wasn't working properly. So i used to the backup to revert to my old drivers. But now the old sound driver doesn't work any more so I have to use the new one I got from the lenovo website. I tried system restore but it didn't help. Then I noticed OneKey Theater movie mode wasn't working properly. The sound changes but the display changes only for a second and goes back to normal. I've tried re-installing the driver but nothing seems to work!

HELP!

Answer:Lenovo Z570 OneKey Theater problem

.Please try the following site for Genuine Drivers etc - Lenovo Drivers and Support Site unless you have changed the sound card. Then please list any new sound card installed -Uninstall your drivers and reinstall new drivers from Lenovo -

1 more replies
Relevance 68.88%

Hi,I just got my new Y580 today, and I was letting my battery die out, and when I booted back up, my OneKey Theater button stopping working. I can change it manually in the tray icon, but the button doesn't work for changing. Any ideas or suggestions? Thanks

Answer:Y580 OneKey Theater stopped working

Hello ,  Please kindly uninstall energy management from windows uninstaller and  download from the site and re-install again. Do Let us know if problem persists.Lenovo Energy Management for Microsoft Windows 7 (32-bit, 64-bit) - IdeaPad Y480, Y580[-] Click to hide files Lenovo Energy Managementcagt24ww.exe21.2MBWindows 7 32bit,Windows 7 64bit7.0.3.214 Jun 2012Thanks

9 more replies
Relevance 68.88%

Lenovo OneKey Theater - this app dont allow me to work in AutoCad 2013 and few other programs, it will crash every time until i switch off it, exist any update of this app?? my laptop - idea y580, win 7 64-bitsorry for my bad english

Answer:Lenovo OneKey Theater - crashing other programs

Please upgrade to OneKeyTheatr for windows 8.1, so as to work really became impossible to set OneKeyTheatr previous versions . Right-clicking does not work in most windows and does not work full-time volume control windows, available volume mixer and run some applications ( quite a large number ) , including Solid Works 2013 . And without it properly functioning hot keys on the notebook chassis (lenovo ideapad z580 win 8.1 x64) . Waiting for updates, thanks in advance . Sorry for the bad English . Thank google translate.

1 more replies
Relevance 68.06%

Hello,I just got the laptop and I am still setting it up. I have installed all drivers but now I wanted to test the video using the Onekey theater feature but it is not working. There is no available version for Ideapad Y570, only for Y560 so I installed that version but when I press the button... nothing happens! . Also when i rebooted the system after installing Onekey theater 2.0 a message was displayed saying that there is a problem with the audio drivers.  Please help! Thanks

Answer:Onekey theater button not working - Ideapad Y570

First uninstall the current Audio Driver that you have, then download this: Realtek High Definition Audio Driver v6.0.1.6339 Then uninstall the OneKey theater you installed before as that was the wrong version then download this one: Lenovo OneKey Theater v2.0.2.8 I noticed that the OneKey Theater is not available from the official Lenovo Drivers Download page (Very weird) so I uploaded the OneKey Theater that is in the Original Drivers/Apps that came with my Lenovo IdeaPad Y570 I am certain this will sort out your issue. Make sure you restart after you uninstall your current Audio Driver + OneKey Theater and also reboot after installing them.





ASUS G750JX-CV050H | i7-4700HQ @ 2.40 GHz. | 32 GB DDR3 1600 MHz. Hynix RAM | 256 GB LiteOn LCM-256M3S SSD + 1 TB Seagate Momentus ST1000LM024 5400 RPM HDD | GeForce GTX 770M 3 GB GDDR5 RAM | 17.3" Full HD 3D Glossy Screen

1 more replies
Relevance 68.06%

Hi,I have a lenovo Z5070 notebook. It first came with a windows 8 - 64bit and then I upgraded it to Windows 10 - 64bit. It's still using the onekey theater app which was installed on by the company. I'm now looking for the new version of this app. Can anybody help me please ?

More replies
Relevance 68.06%

Can anyone tell me where I can find Dolby Home Theater v4 on the T420s? According to the Dolby site the T420s has been issued with it. http://www.dolby.com/consumer/product/pc/laptop/lenovo-thinkpad-t420s.html However I have pulled open 4 T420s machines that I have on stock and it's nowhere to be found ...!? Am I missing something?





Lenovo Premium Business PartnerX1 Carbon Touch | i7-3667U | 8Gb | 256Gb | HD 4000 | 14HD+ | WWAN | W8.1 Pro RTM x64 |









Solved!

Go to Solution.

Answer:Dolby Home Theater / Onekey on T420s missing?

Never mind, found it: In control panel / sound / speaker / properties / dolby ... Well hidden guys :-)





Lenovo Premium Business PartnerX1 Carbon Touch | i7-3667U | 8Gb | 256Gb | HD 4000 | 14HD+ | WWAN | W8.1 Pro RTM x64 |

1 more replies
Relevance 68.06%

Hey thereI purchased a y580 a little while back, installed my own SSD with the OS, updated all the drivers from the y580 page and ran Windows Update.  The Onekey theater button no longer works and the speaker button doesn't light up now like they did before.I've uninstalled Energy Management many times and reinstalled it and it's the same thing.Pressing the Onekey Theater button does nothing.  Pressing the speaker button causes the system to mute and display the Lenovo mute/unmute logo at the bottom right but it will not light up.













Solved!

Go to Solution.

Answer:y580 OneKey Theater II & Mute/sound buttons

Reinstalled onekey theatre and sound driver too.





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

9 more replies
Relevance 68.06%

Onekey Theater and the Dolby buttons don't seem to work at all in my Y550 notebook with Windows &. Well, the Onekey Theater works occasionally, but not most of the time. The only change I have seen when it does work is that the sound seems to become louder. I don't know if that is the only effect it is supposed to have. The Dolby button does nothing. Here's the kicker: initially, when I pressed the Onekey Theater button, it would start Microsoft Outlook (the trial version which came with the new laptop). I uninstalled MS Office to see if the Onekey Theater button would work after that. But now, whenever I press the button, it simply opens the Date-Time window! The button opens the Date-Time window even on the rare occasion that it seems to work. Anybody else facing this weird problem? What is the resolution?

Answer:Y550 - Win 7 - Onekey Theater & Dolby Buttons don't work

Anybody else having similar problem? Anybody found a resolution for these types of problems? Please help.

1 more replies
Relevance 67.24%

I've been having some trouble lately with the dedicated volume control and Onekey theater buttons on my Z570 laptop not working. Sometimes they work, sometimes they don't. The problem seems to be getting progressively worse -- a few weeks ago I could fairly consistently get them to start working again by putting the laptop in sleep mode and closing the lid, then waking it up again. Now, however, that trick rarely works. The buttons still light up (most of the time -- they have gone dark on a few rare occasions), they just don't respond sometimes. I suspect it may be a matter of physical damage, since remember a time a couple months ago when I had it in my backpack and accidentally set it down a bit roughly, and I've since noticed parts where it looks like the outer casing is slightly warped/bent and doesn't line up right at the seams. However, I would like to see if there are any fixes I could try to rule out software-based issues before looking into potentially costly repair/replacement of damaged hardware.

Answer:Z570 - Volume control and Onekey theater buttons not working

kindly reinstall onekey theatre software and SRS premium sound enhancement software, then also check in task manager (process tab) whether the following process is running or not1) OneKeyStudio.exe2)Onekeysupport.exe if its not running then check your startup programs from start->run->msconfig->startup tab see whether these programs are enabled in startup. I dont think there will be a hardware problem, reinstalling these softwares should work.

2 more replies
Relevance 67.24%

I have a monitor icon on the top left corner of my desktop that overlays everything except videogames. Finally realized it was Onekey Theater. It's become extremely annoying as it overlays the back button on any web browser. Can't figure out how to remedy this, any ideas?

More replies
Relevance 67.24%

I changed my partitions and that onekey recovery hiden partition wiped out. but after that my onekey theater key and power management key doesn't work to. how can I activate it again. I installed acronis instead of onekey recovery. is it possible to address onekey recovery key to acronis?

Answer:Y560 onekey theater and power management doesnt work

download the following utility from symantec and follow the instructions...
 
- extract the utility and run as administrator.
- at the top, you must make sure it is your hard drive disk 1 [if you have flash drive connected it may change]
- depending on what you did, you will have either two or three partitions but it should be the last one.
- for the last partition, select the number under type and change it to 12.
- at the bottom right, select save changes and click ok.
- restart your computer and double check that the hidden partition is no longer visible.
 
thanks to ortegaluis
 
also, re-install power management.
i don't think you can use okr button as acronis button.
 
http://forum.lenovo.com/t5/IdeaPad-Y-U-B-and-Z-series/Disk-Partioning-and-OneKey-Recovery-Feature/td...
 

1 more replies
Relevance 66.83%

Problem is that I've tried everything(re-instaling)  After Dolby instalation and it seems to be working properly but it dont nothing happens, bars of equalizer dont move and changing options dont have effects on sound if some one knows how to fix it I would appreciate that  Sorry for my bad english 













Solved!

Go to Solution.

Answer:Z580 dolby home theater v4 for win 8.1 problem

Once you update the audio drivers, install pcee from here http://www.mediafire.com/download/38sqoqrxuo4qymp/PCEE4.zip worked great for me as I had the same problems a few days ago after upgrading to windows 8.1

4 more replies
Relevance 66.83%

Due to virus infestation I had clean installed Windows 8. I installed drivers but my one key theater both software and sensor buttion doesn't work there is no change in sound. I tried re installing Energy Management but still no difference plus only my volume sensor buttons work others just light up and there is no change in the sound or thermal management moreover Fn+DOWN key and Fn+UP Key which is used to change brightness doesnt work can anyone tell me what i am facing here and help me to solve the problem.

Answer:Z580 One Key Theater Plus Sensor Buttons Not Working

Dear aadidev,
 
Welcome to Lenovo Community,
 
I need you please to install the One Key Theater program and Reinstall the Energy Management to the latest version; you will find the 2 links below, please install them then restart the computer.
 
One Key Theater
 
Lenovo Energy Management
 
Please try this solution and if the problem still exists, just let me know.





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 66.83%

I guess this is another problem i wanted to find out from the community. My heat sensitive touch buttons (which include the energy star battery, onekey theater, and slide nav) have stopped functioning. They are glowing and will glow brighter when touched, however there is nothing that occurs afterwards. Help?

Answer:Heat sensitive battery onekey theater and slide nav buttons not working

hey TheBrownBoss,i would recommend going to http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers.html and update your unit of all its software.





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

1 more replies
Relevance 66.83%

At some point in the past two years, I did something to install a program. I forget what exactly, it was something like disabling a drive, file, idk. Anyways, the next time I started my laptop, the slidenav bar didn't light up. In addition, after further investigation, the slidenav does nothing anymore. Same goes with the theater and battery buttons - but they still light up. I checked my installation of slidenav and it is still there, along with the battery management program which still works fine, just doesn't operate through the button anymore.So, did I somehow turn off the program that starts the operation of the touch controls? Any idea to get it back to its original state? I haven't bothered with trying to fix is as A) I couldn't find anything and B) I never really used those buttons that much anyway. Thanks in advance!

Answer:Y560 slidenav and onekey theater/battery manager buttons problem.

Hi
 
Welcome to Lenovo Community
 
Please try updating the following drivers to rectify the issue
 
Lenovo Energy Management
http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_show_2635.html
 
Slide Nav
http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_show_2644.html
 
Slide Nav Tool
http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_show_5483.html
 
 
Hope This Helps
Cheers!!!

1 more replies
Relevance 66.42%

hi          my laptop Lenovo z580 i5    I upgrade my laptop to windows 8 and  I download all drive from Lenovo site and its work good so after I make active     to the windows by activator my laptop restart and all program work without --Dolby home theater-- he stop  . I make uninstall and install it again no thing happen the same problem and download the update from site also no thing ------- this happen with me after I make active to windows  please help me its so pad                                                        thank you

Answer:dolby home theater in z580 stop work

HiPlease install one key theatre from herehttp://driverdl.lenovo.com.cn/lenovo/DriverFilesUploadFloder/36602/Win8_OnekeyTheater_x64.exeUse winrar to extract the files from the downloaded .exe s you extract from zip or rar file





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

3 more replies
Relevance 65.6%

Hi Community members! My issue is that I had, a week back purchased Lenovo z580 idea pad. It has Dolby Home theatre v4 in it. Drivers are of realtek. The audio of the speakers is not very clear. a bit distorted. as if the sound distorts when a particular musical instrument is being played in the track. Please help. Is it a software issue or I need to send the laptop to a service centre.  

Answer:AUDIO DISTORTION IN DOLBY HOME THEATER V4 IN LENOVO Z580

i also have this problem :/ same as above...

1 more replies
Relevance 65.6%

Hi all,
 
I need the DOLBY HOMETHEATER V4 software not available in LENOVO official driver page of Ideapad Z580. Can any one please provide link or suggest page to download the DOLBY HOME THEATER V4 for my IDEAPAD Z580 windows 7 64bit version notebook PC.
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity

More replies
Relevance 65.6%

Initially my laptop had windows 7 , recently i updated it to windows 8.1 When i installed realtek audio driver, dolby digital plus home theater was installed instead of dolby home theater v4. Can aynone please give detailed steps for installing dolby home theater v4? thankyou













Solved!

Go to Solution.

Answer:Dolby home theater v4 not working in lenovo ideapad Z580

Welcome to the forum.
 
Please see these threads:
 
https://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Dolby-Home-Theater-V4-changed-to-Dolby-Dig...
 
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...
 
Cheers
 
DragonRider
 

4 more replies
Relevance 65.19%

Occasionally, but moreso when my laptop is not on a desk, the touch panel buttons (mute, lower volume, raise volume, onekey theater mode, thermal management mode) will activate themselves without me having touched them. I have had this laptop for around 1-1.5 weeks now, and this problem is rather bothersome when listening to music, or playing a game.

Answer:Z470 touch panel is muting/adjusting volume/changing onekey theater modes by itself

have you tried to re-install power management and/or one key theater?also, do not forget to check if you have the latest bios from the lenovo download page.

9 more replies
Relevance 65.19%

Hello I have an idea pad Z570 with windows 7 64 bit. Recently the thermal management, one key theater, mute and volume dedicated buttons stopped working. I have tried updating from the drivers and software from the drivers page unstalling and reinstaling from the drivers in the webpage and and from lenovo unit D. I do not have a restore point that can be old enough to restore the the system. Do you have any ideas of how can I enable the dedicated buttons again? Thank you very much for your help in advance.  

More replies
Relevance 63.96%

Hi All, I have received my new Z580 win 8 yesterday, i wanted to take a system backup using the Onekey Recovery backup application. since i am going to install multiple OS for a project and got to return the laptop to its factory image. when i start the onekey app and provide the path (i am using my USB 3.0 HDD) in the next screen it says "Press the Start Button" but the start button is greyed out and i am unable to click it. Can anyone please help me out and point out what am i doing wrong. Thanks 

Answer:unable to start OneKey Recovery 8.0 in Z580 Win 8

Did you follow the instruction on page 30 of the user's guide? If yes, which one did you choose?

9 more replies
Relevance 63.96%

Hi to all guys,i'm here with that little problem..I was doing some "cleaning" on my laptop and i was watching all the softwares that i had..So i thought that it was a great idea format the PC!I opened the "Onekey Recovery" software and i clicked the part where it says that i can format my pc...it says "Do you want to restart your pc for enter in Onekey Recovery Software?" I obviously clicked yes,and the pc restarted...but nothing happened:it did only a simply restart,and i didn't see any softwares show up :\ Anyone has an idea of why? Thanks,Ludovico. (Please sorry for my English,I'm Italian )

Answer:Z580 Onekey Recovery doesn't start!

hi Ludovico,
 
Welcome to the Lenovo Forums.
 
The partition struction of the drive must have been modified that's why the recovery partition is not triggering via the OneKey Recovery application.
 
Try one of the following:
1. Create a recovery drive and use it to reset Windows 8.
2. Reset Windows 8
 
 
Hope this helps

5 more replies
Relevance 63.96%

hat appears to I have a new IDEAPAD Z580 and tried to use onekey recovery to do a system backup. It has a default destination, and that is the LENOVO D drive, which is only 24.5 gb. It then informed me there was not enough room on the destination drive and the backup failed. What should I do?
 
Moderator note: moved post to appropriate board.  Edited subject to match content.  Was:  Re: Windows 8 Recovery Disc not working

Answer:Z580: OneKey Recovery backup failure

You can use an external usb hdd. Just specify the location when you run OKR for the backup process.

5 more replies
Relevance 63.96%

Hello all, I just recieved my Z580 in the mail which could only be orded with Windows 8 Home.However I would like to wipe windows 8 and install Windows 7 64-bit Ultimate (already have disk and key) but would also like to keep the OneKey Recovery functionality.  I have searched the forums and while there is a good portion of information on how to make the switch from 8 to 7, none mention OKR working.Before I can do any of this, though, I would like to create a recovery disk of the OEM installation, an option the Lenovo OneKey Recovery does NOT have available on this windows 8 machine. I have already collected all the Windows 7 drivers from the Z580 support page, read about UEFI options and whatnot.  I just now need to know if it is possible toCreate Factory Recovery Disk (with existing Win8)Wipe Win8 and install Win7Create OneKey Recovery functionality Thank you in advance. 

Answer:Z580 - Win8 OEM to Win7 with OneKey Functionality

Hi. As far as I know One Key Recovery (software) doesn't work with Windows 8. So to create a Factory Recovery Disk with Windows 8, you have to use the inbuilt backup function of Windows.You can find this option under:Control Panel-->Windows 7 File Recovery-->Create a System ImageYes it is possible to wipe Win8 and install Win7 just like any other OS.You will lose your OKR functionality once you wipe out Win8.But you can make OKR work again with Win7 as your backup image. For making your custom image for Novo Button, you need to use One Key Recovery 7 Engineer Edition.Here is a link on how to use OKR EEhttp://forums.lenovo.com/t5/Lenovo-3000-and-Essential/Disk-Partitioning-and-OneKey-Recovery-Feature/...If you have any problem, you can pm me.

8 more replies
Relevance 63.96%

I wanted to recover my system partition from image I did after installing fresh Windows, I used OneKey recovery feature, everything went fine, no errors, etc. When I was asked wether to reboot my system or shut it down after recovering I chose reboot. And then it stopped reacting at all, monitor didn't even show anything, I shut it down and tried to launch it again but it didn't help. There is a sound that cpu is working but nothing else, monitor doesn't react, keys don't also. I tried lanuching OneKey Revocery menu but it didn't launch too. I tried plugging USB in with Windows on it and installing it that way but it didn't do anything good. I took RAM stick out and turned laptop on to check if there will be any sound that BIOS didn't detect RAM stick but there wasn't so I guess BIOS isn't even loading. Is there anything else I can do to fix it or all I have left is to get it to repair point?

More replies
Relevance 63.14%

Hi, my Z580 started shutting down unexpectedly, and now I can't get beyond the Automatic Repair screen. I tried using a OneKey recovery drive provided by a friend, which at last allowed me start the computer normally, but only long enough for it tell me it was unstable before shutting down again.It's now stuck in an automatic repair loop again, what can I do?

Answer:Z580 stuck in repair loop, OneKey failed

Dear Burmabright
 
Welcome to Lenovo Forums
 
If you have done any resizing for the hard drive or installed another version of windows the recovery wont work
if not try running the recovery again while the machine is off from the onekey recovery button
 
Thanks





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 61.91%

As the title says, just wondered if theres any lenovo software the works with the z580 ? lenovo companion on windows 8 offers some stuff but its listed as u series ect ? cheers for replys inadvance,mike

Answer:(z580) Just wondered what lenovo software will work with the z580 ?

hi mikee77,
 
The Lenovo Z580 comes with these lenovo pre-installed apps:
 
Lenovo OneKey RecoveryLenovo OneKey TheaterLenovo Cloud Storage by SugarSyncLenovo Energy ManagementLenovo Companion
 
The Lenovo Companion is like an app store the features:
 

Third-Party Apps and Ads
Lenovo products, Tutorials, Application showcases, Lenovo accessories information, Lenovo Cloud, and a link to Lenovo blogs and articles

Most apps listed on the Lenovo Companion will work on the Z580 as long as it meets the system requirements (i.e. If an app is made only for Touchscreen models, then you will need to get the non-touchscreen version or if there's a Utility app that senses temperature on a specific model, make sure Z580 is on the supported models).
 
Click here for more information on the preloaded softwares on the Z580 and click here for more information on the Lenovo Companion.
 
 
Hope this helps.

2 more replies
Relevance 61.91%

Hello every body,i have problem to get in OneKey Rescue System( Booting mode of OneKey Recovery). I tried get in by OneKey Rescue Syste m (Press NOVO Button to enter) and One Key Recovery (Windows Software). But its just restart the system and start the windows like normally. Can someone help me with this problem?This happens after i upgraded to windows 10 then i reinstall my windows to windows 7. But now i cant get into the Onekey Rescue System anymore. 

More replies
Relevance 61.91%

G'day From Australia I'm basically trying to help people with Dolby Home Theater 4 if they have Realtek Audio Software installed.

Okay so if you're getting an error message saying the driver is wrong when you install Dolby - you'll have to go to Control Panel then Programs then uninstall programs and uninstall Dolby.

Once it's uninstalled use you're file browser (the yellow folder near the start Button) and click on C drive. Click on Programs and Find the "Realtek" folder. Click on "Realtek" then click on "Audio" click on the file "PCEE4" then click on "Dolby Home Theater" this will install the right version for Windows 7 - simply follow the promps, and you good to go - remembering you need to click on the short cut of Dolby on your desktop and click the on button to activate Dolby.

More replies
Relevance 60.68%

Hi, I got 2 months ago ideapad 300 with windows 10 and yesterday I  accidantly uninstalled the onekey recovery software from windows and I can't find where can I download it. My software looked exactly like the attached picture.

























okrhomewindow.png ?87 KB

More replies
Relevance 58.22%

Hi there I have purchased a new Lenovo Ideapad Z580 with Windows 8 (64-bit). It was advertised with Veriface software, but to date, I have found nothing. The Lenovo support website for the Z580 does offer a download, but the sales brochures still advertise it. Where is the Veriface software? Joe

Answer:No Veriface software on Ideapad Z580 (Windows 8)

HiVeriface is for windows 7 only. It is not compatible with windows 8.





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

3 more replies
Relevance 57.4%

I was having some issues in youcam hence i uninstalled it. I cant find the link to install it again.Where can i find Youcam download link for Ideapad Z580(Windows 8 /64 bit) ?Please, I need it urgently. 

More replies
Relevance 57.4%

UPDATE - Okay, fixed the BIOS issue by flashing it with the new BIOS release.Now when I hit the recovery button, I get NTDLR is missing, press ctrl+alt+del to restart. Okay.  2 problems.  1st, I can not enter BIOS.  I do not get the screen that says press F2, F12, or anything.  I have tried hitting F2 once, quickly, slowly, etc...along with every Fkey on the keyboard, along with esc and delete.  The system seems to be quickly booting into Windows. Also, using the onekey recovery while the system is off does not boot me into the recovery console, it simply boots me into Windows.  I *THOUGHT* all these problems started after I installed Windows 7 onto d:.  I *thought* I fixed this because recovery console suddenly started working for me, and the lenovo emblem during boot gave me the F-key options displayed below.  However, after some playing around, I have been able to get rid of the BCD boot process (used in vista and win7) and have now returned to using boot.ini - still no luck.I'm out of ideas.  Any suggestions?Message Edited by BaileyMoto on 11-08-2008 05:30 PM

Answer:Cant enter BIOS and cant use OneKey - Onekey boots directly to windows.

Okay, fixed the BIOS issue by flashing it with the new BIOS release.Now when I hit the recovery button, I get NTDLR is missing, press ctrl+alt+del to restart.

2 more replies
Relevance 56.99%

I've got a z580 which came with pre-installed Windows 8.0
 
Following a Windows corruption I have successfully re-installed Windows 8.0 using OneKey to the original factory status and the z580 is functioning OK, having applied all Windows updates.
 
However I cannot create a recover disk becauase as soon as I click 'System Backup' in OneKey I get the message 'Current system can not support backup'.
 
What do I need to do to get OneKey to create a recover disk?
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity

Answer:z580 - Creating recovery disk using OneKey Recovery System Backup is failing

Page 23 of the hardware maintenance manual discussess the use of Recovery Disc Sets to make a recovery. There are no instruction on how to make these discs. Why not give Lenovo a call and inquire on how to obtain this disc set from them?

6 more replies
Relevance 56.99%

Hello - please bear in mind that I am not technically proficient, but in fairness i don't think one should be.  As the Lenovo doesn't come with a back-up or recovery disc, I obviously need to make up my own.  I thought that the OneKey recovery system would lead me through it (it says it's "easy-to-use"), but right away I'm confused:  what's the difference between "System Backup" and "System Recovery"?  I keep reading the blurb and I've read the "Help" file, but I'm not getting any closer to understanding  The System Backup seems to require 98.9 GB space, which obviously the hidden drive doesn't have.  I'd need a stack of DVD-Rs for this (I was kind of hoping two or three) or a whole new removable drive  -- does this seem right?  But, again, what am I looking for, a System Backup or a System Recovery?  On my old Acer, it used to lead you through this step by step and it was incredibly simple.  Now, it seems the only simple thing is me.  Any patient help would be much appreciated.  Thanking in advance, Adam K.

Answer:completely lost - Creating a recovery disc for IdeaPad Z580 (and OneKey Recovery)

They are similar. One difference is that if the disk is defective you cant use OKR anymore. Thus you can't do any restoration yourself. You will have to send in your unit to Lenovo to have the disk replaced and your system restored to factory default. You don't need a stack of DVD-Rs to save your backup ... System backup files can be saved in an external Hdd drive plus the creation of a Repair DVD disk for startup and restoration purposes.

9 more replies
Relevance 54.53%

I am looking for software that will help me play videos, audio, and images seamlessly. The way I will have it is I have a computer connected to a projector. I want to be able to have a playlist filled with videos, audio, and images that play when i press play and pause once they are finished playing. I want videos and images to fade in and out.

Ont he projector I do not want any controls to be displayed only the media files but on the computer screen I want the controls to be displayed.

does anyone know of software that can do this?
 

Answer:Solved: Media Theater Software

The only way I have seen to do that is with a special,small touch
sceen monitor that runs it's own software to display controls.
Most media centers will show controls,but they fade out and disappear
unless there is some input from a mouse,keyboard or other device.
If you are running windows 7 premium or ultimate,you already have
windows media center.
http://www.microsoft.com/windows/windows-media-center/get-started/default.aspx
There are others,like xbmc..........
http://xbmc.org/
Media portal,this is what xbmc was built from far as I remember.
http://www.team-mediaportal.com/
Freevo..........
http://freevo.sourceforge.net/
Boxee..........
http://www.boxee.tv/make
Sure I have missed some.
There are paid ones out there too,like JR media center and snap beyond tv.
Guess it's a matter of finding what will work for you.
 

2 more replies
Relevance 54.53%

I've upgraded both my TV and Home Theater before by downloading the software from Philips website. No problems at all. I had Vista Home Premium, but now Windows 8.The Home Theater can't verify the software, which is a BIN - file. I've contacted Philips about the problem, and they were so kind sending me a USB-stick with 'the correct' software. But it's the same as the one I downloaded. They said no, when I asked if the BIN should be converted to something else. I don't no what to do now.

More replies
Relevance 54.12%

I had upgraded my Y500 from Windows 8.1 to 10. Before, I had One Key Theater installed and it worked perfectly fine. I didn't have the Dobly Home Theater app. The Windows 10 Creator's Update came to my laptop and I upgraded last week Wednesday. On Friday, my laptop wouldn't boot up, not sure if this is related to the Creators update. I couldn't perform Start-up Repair, System Recovery nor a PC Refresh. I ended up having to reinstall Windows 10 from a recovery drive I created a while back. My laptop is now recovered except for the tedious part of reinstalling all my apps. I've been trying to reinstall One Key Theater and I keep getting an error message saying that this application does not work for this version of Windows. Furthermore, I noticed the Dolby Home Theater application but it does not work. The icon appears in the notification area of the task bar but whenever I try to open the application fully, it crashes.I've seen posts about these very same problem for Dolby Home Theater and they all recommend uninstalling and reinstalling the audio driver and also reinstalling Dolby Home Theater which I've done a couple times now but this still does not work.Will Lenovo be releasing a version of One Key Theater that works for Windows 10 Creators Update?Will a fix come out for this problem with Dolby Home Theater?Has anyone found a solution?

Answer:Lenovo One Key Theater Won't Install and Dolby Home Theater Doesn't Work Either

Reference this:https://pcsupport.lenovo.com/us/en/solutions/HT104006

1 more replies
Relevance 52.07%

Hi ... Curious to know what to do if the hard drive dies on a Lenovo IdeaPad Y510 laptop ? There no warranty on this model because of the age . So what can one do to restore Vsta 32 bit original operating system ? Is there a OneKey Recovery 4.65 software download link ? Or what's the best option to take to restore the laptop back to factory OS ? Thx













Solved!

Go to Solution.

Answer:OneKey Recovery 4.65 software ?

Hi 905dude,
 
Are you running the original Vista system now?
 
Do you have the original OKR installed on your machine?  If so, you can burn a set of restore discs from within OKR.  
 
Restore discs wil take it back to the factory settings.  You can do a full backup to an external hard drive and then use the discs to restore the system from the external hard drive. That would give you your current system.
 
If you install a later version of OKR, then there won't be an image to restore from.  You would have to provide your current image to OKR and then it would restore from the image you provided.
 
Regards,
Dave 

8 more replies
Relevance 52.07%

Hey,
 
Does anyone here know a good recovery software that can be set up to boot into the recovery environment when someone pushes the Nova Button (Button next to power button on laptops). I have a Lenovo B575 and I had originally installed Lenovo Onekey Recovery which boots into the Recovery Environment when you push the Nova Button. However I recently upgraded to Windows 8.1 and I understand that is no longer an option. If anyone knows a good recovery software that can do that please let me know or even better if you can find a way to reinstall Lenovo Onekey Recovery in Windows 8.1. I have already tried installing it from the Lenovo website but in order to boot from the Recovery Environment you need to have the OEM and Recovery Partitions and I don't know where to go to get those. Any help is appreciated.
 
Thanks,
-Benjamin

Answer:Onekey Recovery Software

After wiping the existing OEM recovery partition, I do not think you will be able to get the button to work. I think Levono possibly has some code in the Recovery Partition that responds to the button push at boot. In your other thread you were going to try Aoemi One Key. Did that work okay? I know it will not work with the button push but I believe on a Windows 8 computer, it boots to a screen that gives an option to boot to the Aoemi recovery partition or to boot normally.

5 more replies
Relevance 52.07%

dear friends,i need onekey recovery software for my lenovo notebook plsmodel : y410-8cq thanks  

Answer:i need onekey recovery software pls......

do anybody here can help me gettig onekey recovery software

8 more replies
Relevance 51.66%

i cant find the downloads for the onekey recovery, onetheather recovery and energy management for ideapad y480, the download page doesnt have any links, can you please help?!

Answer:Y480 onekey software download!

as far as I know, nothing exists.  If you did not back up your computer using OKR to HD or DVD, I believe you have to send it back to Lenovo to get it re-written. There is a thread that covers rebuilding your computer without OKRhttp://forums.lenovo.com/t5/IdeaPad-Y-U-V-and-Z-series/IdeaPad-Y570-Clean-Install-Guide-v2/td-p/7711...





_________________________________________________________IdeaPad V570-1066A9U, Built 5-22-2011, BIOS 44CN36WW(2011-08-04)Win7 Pro x64 clean install. Sammy 840 Pro 128GB SSD. Fast! Used nice hardware manual to re-grease CPU and remove tiny bit of lint.

4 more replies
Relevance 51.66%

Hi everyone, I want to reinstall Win7 on my v570 because I'm hoping to resolve some performance issues. I love the notebook and the stock applications that came with it: Bioexcess, Lenovo Security Suite, Boot Optimizer, VeriFace, etc... My question is this: Will using the OneKey recovery app to restore to the original factory settings simply do a clean install of Windows 7, or will it install Win7 with the Lenovo applications and Bioexcess as well? Thanks,Nathaniel













Solved!

Go to Solution.

Answer:OneKey Factory Default and OEM Software

hi nathanielfilipe.if you use one key recover button to perform clean windows installation, you won't need to re-install these softwares.hope this helps.

1 more replies
Relevance 50.84%

Hi. I've bought a Yoga Home 900 27" at Amazon warehouse, but there is no Lenove specific software on it (Aura, Games, ...)  I've tried to reset the Yoga to factory settings with the F2 hint by "Kalvin Klein", but this won't work for me :-(  How can I get the Yoga Home 900 specific Software? I saw, that I can download Aura from the support area, but this won't bring me the games. To honest, I would prefer to do a clean factory reset with the onekey recovery. But if this won't be possible, maybe I can get the software from here or anywhere? Any help is really appreciated. Thanks Christian 

More replies
Relevance 50.02%

Please can someone explain where one can download the software that came preinstalled as there were no discs provided and it isn't available on the drivers/software section in support. Specifically the Lenovo OEM versions of the cyberlink software, power dvd, youcam and power2go?

Answer:Z580 Preinstalled software

HiCan you checkd;/drivers?





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

2 more replies
Relevance 50.02%

Few months ago I swapped my CD-Drive for a SSD, brilliant idea for the Y570's HDD is very very slow. (Boot times are now under 15 seconds from pressing the power button to a usable desktop) I installed the lenovo onekey theatre and that works fine via manual selection, the top right keys on my laptop do NOT work for selecting the Onekey theatre. Aswell as this I can't at ALL find any drivers for the thermal management software. Any help would be greatly appreciated. *Note The LED's are lit up properly, and seem to flash in response to pressing them, however nothing happens.

Answer:Lenovo Y570 - Thermal management/Onekey Theatre Software?

Have you installed energy management software? Cause All th Osd are controlled by it. So please install it.





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

1 more replies
Relevance 49.61%

Hi, i had a problem with my Lenovo Yoga 13, I recovered all the data but the partitions are all messed up, and Onekey Recovery doesn't work. I know is something about the partitions, I had also a problem with something called "Intel Rapid Technology" giving me an error, i fixed it creating a partition and setting the id of it (i saw that on this forum somewhere). My list of partitions is this:    Number    Type           Size            Offset------------- ---------------- ------- ---------------Partition 1 OEM           1000 MB      1024 KBPartition 2 System       260 MB        1001 MBPartition 3 OEM           1000 MB      1261 MBPartition 4 Reserved   128 MB         2261 MBPartition 5 Primary       92 GB          2389 MBPartition 6 Primary       4096 MB      95 GBPartition 7 Unknown     8191 MB      99 GBPartition 8 OEM            12 GB          107 GB The partition 7 is the one that I created. I think that partition 1 and partition 8 should appear as "Recovery" type partitions, but I don't know how to set them so. The data in the "D" partition is all there, but i'm not sure about the others, but... Read more

Answer:Lenovo Yoga 13 disk partitions for onekey recovery... or delete onekey?

hi iperich,
 
In some cases, if the partition structure of the hard drive is changed, OneKey Recovery may cease to work.
 
If you're leaning towards freeing up space on the Yoga 13, check this Yoga 13 Hotfix.
 
Alternatively, you can also try the following.
1. Create a recovery drive (if it's still applicable - this is to backup your recovery partition into a flashdrive)
2. Follow this guide by Yikes2000. on how to manually repartition the Yoga 13.
 
In regards to manually deleting partitions 6,7, and 8, this would be fine if the OS is located in partition 5 (ensure that you back-up important files first).
 
 
Regards

3 more replies
Relevance 49.2%

I have been away and not used the laptop for a few days and got the above message in a grey text box asking me to OK it. It is not something that I have initiated. Is this something I should be wary of or is it OK to continue using laptop? I'm using AVAST anti-virus which is up to date. Any help greatly appreciated.    

Answer:G555 - system back up default path created in D:\Lenovo\OneKey\OneKey Recovery\ PROMPT

Sounds like you or someone hit the One key backup button on the upder left of the laptop.

1 more replies
Relevance 49.2%

Computer : Lenovo IdeaPad P580 with Windows 7
 
Hi ! My internal HDD died, but I managed to backup everything with both the Windows 7 utility (both files and system image), and OneKey Recovery. The HDD was changed and set back to factory default. I can easily restore the files, but the system image from Windows 7 utility is not detected. I want to try to restore my computer with OneKey Recovery.
 
1. When I press the OKR button in Windows, the OneKey Recovery program is displayed, as it should.
2. I ask for a recovery, it says the system will boot in recovery mode.
3. I get the BIOS splash screen, then Windows 7 splash screen, and then Windows simply boots normally.
4. The OKR button won't activate the recovery mode ; it simply acts like the power button.
 
My problem is much similar to the one explained in the topic "One-Key Recovery will not boot into recovery system (y450)", however, the Lenovo's hidden partition is already hidden (its type is already set to 12). This video also provides the very same solution, but it doesn't seem to apply to my case.
 

 
Let me explain :
 
I have 4 partitions :
1. One hidden partition of 200 MB*. I've read it might be the WinRE environnement, I should not touch it. Originally, it had no name, but I gave it the name "Environnement WinRE". Its partition type ID is 07 (NTFS Windows).
2. My main partition C:, type 07. Size : 653,44 GB
3. Lenovo's D: partition, type 07. Size : 25,47 GB
4. Lenovo's hidden diagnost... Read more

Answer:Can't boot OneKey's recovery mode, OneKey button does not work

good question.  I can't offer any suggestions here but would also like to know if those other partitions are really needed if you have a complete cloned hdd with those other partitions as a backup.  I don't like the idea there is at least 40GB of unnecessary partitions and data reserved that I cannot use.

7 more replies
Relevance 49.2%

I recently replaced my hard-disk due to a fatal corruption and all data are are lost.This has not seemed especially inconvienant, until I found that the fan control button now has no effect. I have searched google and lenovo community briefly, and found nowhere I could download these pre-installed softwares. I did not search really carefully, but I could not recall the exact name of that certain software.Yet I have been quite used to this controlling software, as well as little things like the display that appears on the screen when you adjust volume or brightness. Do you guys know where can I find download for these softwares which are compatitable with my machine? I would appreciate if anyone could help. Thank you!  Some additional information.I bought my Z580 in UK, and the OS is win7 home premium 64-bit.The softwares I'm looking for can be found in a folder named "drivers" on D: driver.

More replies