Computer Support Forum

Op sys is on 250gb, reads as 127gb

Question: Op sys is on 250gb, reads as 127gb

Hey guys.
I setup my system on a 250gb hard drive but system reads it as a 127gb. I downloaded the software for converging it to its original form yet it won't let me as it is the C:// drive. If anyone can point me in a direction that might be able to assist, that would be awesome (i.e. a possible partition of the space that wasn't originally read?) THANK YOU!

Relevance 100%
Preferred Solution: Op sys is on 250gb, reads as 127gb

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Op sys is on 250gb, reads as 127gb

Do you have Windows XP Service Pack 2? That is the usual cause for this problem.
If you do not, you mayl not be able to partition the drive to anything larger than 132 GB... 127 or so after formatting the partition.
It becomes a catch 22. You could partition and format the hard drive to the 250 GB figure, if you had Windows XP Service Pack 2 to do the setup of the NTFS partition. It will work once as the full 250, or so, once it has Windows on it, but getting Windows on it prevents that.
There are solutions online you should be able to find with a Google search, but they require jumping through a few hoops.
One solution is to setup the hard drive as a slave in a computer that has Service Pack 2... or setup the drive with two partitions while slaved in another computer.
Alternately, set it up as 127 GB, then upgrade Windows with the Service Pack 2 disk you buy from Microsoft for $3.40, then use partition magic or Acronis to enlarge the partition.

12 more replies
Relevance 83.23%

this summer i built myself a new computer. i was having sum trouble getting windows installed and thought it might be 1 of the HD's so i unhooked it. once i got it going i kind of forgot about the 250GB HD until just recently. i hooked it up and formatted it but it only showed up as a 127GB HD when it's supposed to be 250GB. this is very puzzling because on the post screen it clearly reads that it's a 250GB HD.

can someone please tell me what i hav to do to get it working correctly because i'd really like to move my music off of my dad's comp. btw, my system specs are in the sig

Answer:250GB HD showing up as 127GB!?

What kind of hard drive do you have? I don't see the sig on the screen so if its there i just can't see it. Also what operating system are you running??

9 more replies
Relevance 81.18%

I have a 250gb hd in my uncles computer and I put sp2 on it because I thought it had the update I needed for xp to see the full size but it still doesn't. Is there something else I'm suppose to do?

Answer:250gb drive still showing up as 127gb after sp2 update on xp

Whoa, what?

9 more replies
Relevance 80.36%

Ive been reading around and noticed that problems like this are fairly common. Im having troubles finding something that applies to me. I have a Dell Dimensin 8100 P4 1.4 GHZ, its sorta old i guess, it was a relatively new P4 computer i think. I just bought a Hitachi GSX 250GB ATA-100 IDE 8MB Buffer hard drive and havent been able to get it to be recognized at more than 127GB. I tried updating my BIOS (went from Revision A02 to AO9) but that didnt make any difference on the drive. DO i have to wipe the drive and start over with the blank drive or what? I also read that XP Home needs SP1 to recognized more than 127GB so i downloaded SP2 and it didnt make a difference. If anyone can clear up why this isnt working thatd be great.Thanks Alot

Answer:Solved: 250GB Hard Drive Only Showing as 127GB

12 more replies
Relevance 51.25%

hello, i just bought a new machine and i'm having trouble with my HDD i have a SATA 250 gig and i'm running XP, when i look in my HDD properties it only shows i have a capacity of 127gigs. what can i do to fix this? please help me.

Answer:250 gig SATA only reads as 127gig in windows, but reads full 250gig in BIOS what do i

Hello and welcome to Techspot.

Look HERE. It may answer your question.

Regards Howard :wave: :wave:

4 more replies
Relevance 51.25%


I am running a Vista Ultimate PC with Intel Core 2 Duo 1.86Ghz Processors and GenuineIntel 946GZIS. I purchased the PC in march this year.

My DVD RW drive is a Sony DVD RW AW-G170A ATA Device. The problem that I am facing is:

Initially for the first few months, I did not face any problem. However I never burned a DVD so cant be sure but there never was a problem burning CDs.

Then, slowly, some DVDs wud not be read at my system. I assumed it is due to the fact that DVDs are burned in different formats, different write speeds, etc and teh remight be some incompatibility. However, soon all DVDs wud not be read by my system. Instead it identifies every DVD as a blank DVD. And when I try burning a blank DVD, no mater by what tool - i tried InfraRecorder, Nero 7, Nero 8, Windows DVD Burner, i would get a "Power caliberation Error"...

Yet, at least CDs were read.

However, for the last 2 days 9 out of 10 times, when I insert a CD Vista asks me to "Insert a Disc into the Drive", it is only the 10% of times when it reads the CD. Even this is a generous estimate.

Kindly help me. What is the problem? What is the Cause? and What is the solution?
I had a strong w32.Sodad-A (this is wht i remember) infection in the month of october. I cud nt find any reference of this virus affecting Optical Drive performance on the net, but it is only after i removed this infection that i observe these issues.

Answer:Sony DVD RW AW-G170A ATA Device: Seldom Reads CDs, Never Reads DVDs, Never Burns Any

I have the exact same problem for the same device - only started last wednesday and very annoying. I have tried everything to get it sorted. Will only read about 25% of disks and seems to be randomly affecting things. I did a fresh install of windows vista but the problem still exists, so i'm assuming it may be a hardware problem. Mesh Computers are investigating the problem and due to call me on Monday so if I get an answer i'll post an update here.

9 more replies
Relevance 50.84%

Hi, (not sure where to post this)

Im doing a DipICT and for course we need to download pdf files to our laptop and bring it in to class (big earthquake, moved campus, no computers or internet etc, long story). But the files i need to have on my laptop in class, do not run on adobe in my laptop, as it says its possibly wrong file type or a damaged file (encrypted wrong). But they do run on my desktop. I really want them to run on my laptop, do you have any suggestions? I tried "reinstall" or something and i think it installed, possibly downloaded it again as well, didnt work. It is the lastest version of adobe pdf reader.


Answer:[SOLVED] adobe on my laptop reads some pdf's, but not others that my desktop reads

If it's only some of them, it's possible that they got corrupted when you moved them over to the laptop. Or, if you downloaded them directly to the laptop, they got corrupted during download. Which way did you get the pdfs to the laptop?

11 more replies
Relevance 47.97%

What happened
It worked fine yesterday
It doesnt work today

It has the latest firmware
I am still running WIN xp

I saw this kind of error in another post
but it is dated a year ago and it didnt look like there was any resolution


Answer:DVD-/+RW ND-1300A reads CD's No longer reads any DVD

Return it if still under warranty.
Otherwise open it up and check if the flat filmcable to the lens-arm is still properly attached.

2 more replies
Relevance 46.74%

Hello all
I cannot seem to get my 300GB Seagate SATA drive to show it's full size. I have XP SP2 and haven't had any other problems besides this and it's driving me nuts.
Thanks for any help!

This is my system:
AMD Athlon 64 X2 4200+
Gigabyte M55SLI-S4 NVIDIA Socket AM2 ATX Motherboard
OCZ Gold XTC 1024MB PC6400 DDR2 800MHz
BFG GeForce 7950 GT
Seagate Barracuda 300GB 7200rpm SATA (ST3300620AS)

Answer:Cannot get more than 127GB from HDD

hi there,

i have had this problem in the past with my sisters pc, which didnt recognise an 80gb hard drive (it was an old pentium 2/400Mhz machine he either way if i remember correctly we changed something on the bios and a jumper on the disk as it was an ide. however in your case i would suggest to check the bios for any option for the disk, and most probably u'll need an update on the bios, as some older bios dont allow big disks for blablabla reasons.. if u check with gigabyte site i think they have an online update utility which makes this process hassle free.
if this is not the case then check with settings on the sata controller although i dont think this should be it.
anyway, havent had this problem for ages so i cant really be certain.
anyhow. other users will advise aswell i think

happy nut driving and gluck

4 more replies
Relevance 46.33%
Question: 127gb limit

a friend was having problems with this, so i suggested he used partition magic to split his 160gb external into 2x 80gb, but am now woundering whether this will help.

will it?

thanks in advance

Answer:127gb limit

He didn't search the TF, did he? *sigh* They never search the TF...A topic (like this) could be asked and answered a hundred times, and no one bothers looking.

8 more replies
Relevance 46.33%

Hey guys. I just got a brand new Seagate 200GB IDE HD for Christmas this morning. To make a long story short, I install it, I install Windows XP, and I'm good UNTIL I open My Computer and see that it's only 127GB. I think this is a service pack issue judging by what I read on , but I don't want to upgarde my service pack to SP1 or SP2. Is there any other alternative way to fix this issue? Thanks.

-Dan The Man

Answer:New HD Only Registers As 127GB

Its due to either a BIOS limitation from an Intel chipset or your motherboard's limitation.

2 solutions:

Intel: download the Intel Application Accelerator

Non-Intel: Buy a Ultra ATA 133 PCI card with 48-bit Logical Block Addressing.

5 more replies
Relevance 46.33%

I Need some helpI had gotten a 160gb HD from my mom.  It was 160 at the time.  I then erased all the files and deleted the partition and thats when it happened.  It gave up 30gb.  So now I have a 127gb HD.  I did the same thing with my 80gb HD and this did not happen.I have:Windows XP Professional2.1gHzAMD Athlon 2600+ATI Radeon 9200se 128mbPlease Help.

Answer:160gb HD is now a 127gb HD

How did you delete the partition ? ?It's possible that HDD has a hidden 30G partition on it especially if it's from an OEM machine, Dell HP etc...If you want to get the full drive back run FDisk on it from a boot floppy which will show hidden partitions...just delete the hidden, create a new one using 100% of the drive space and you should be good to go.

8 more replies
Relevance 45.51%

Hi, I want to buy a new hard drive for my desktop PC, and I was wondering if the western digital black 250GB hard drive or western digital enterprise 250GB hard drive would work better for such a PC. Both of the HDDs I mentioned are SATA, in case you're wondering.

Answer:Solved: western digital black 250GB vs. western digital enterprise 250GB

13 more replies
Relevance 45.51%


Just bought new seagate 160gig hdd. My comp recognises as 127gig. Installed SP1 today, still 127gig.

Mobo is Soltek SL-75DRV2
Bios has not been updated... original one....not sure how to check version
soltek site sez version k4.1 for support over 137gb hdd
... maybe i need dat?

Also i installed Hyperion pro 4in1 driver today.
In user manual for software dat came wif mobo it sez when installing drivers to tick and install VIA ATAPI Vendor Suport Driver. I cant see this on my CD when i try install from it so tried instaling the hyperion one.

It seems my comp is running ATA not ATAPI for hard drives (wateva dat means )

Plz Help

Answer:Solved: HDD 160gb->127gb :(

11 more replies
Relevance 45.51%

I just got a new Seagate 250GB HDD and Windows says its only 127GB...ive read some about this and apparently after SP2 (Which I have) its not an its a motherboard issue then? Well what do I need to change with my motherboard so it will recognize? i have latest BIOS and the motherboard is new. Please help...

Answer:Windows Only Sees 127GB

12 more replies
Relevance 45.51%

I am using a Barracuda 7200.10 SATA 3.0Gb/s 250-GB Hard Drive. About a week after installation of Windows Vista premium 32bit I suddenly noticed that the drive started showing only 127 GB of hard drive space. I am very puzzled by this because I know 48bit LBA is enabled so the 127 GB limit should not apply. Indeed in Disk Management it shows the C partition as 232gb NTFS and populating the drive in the disk properties yields the same size, but a chkdsk run will only read 127gb. I ran Seagate's seatools hard drive diagnostics on the drive for three hours with no errors. I combed through my eventvwr log back to installation and I find no disk errors.
What could be causing this?

Answer:127GB limit in NTFS

I've never try it, but this may help:
HDD Capacity Restore Free Download

2 more replies
Relevance 45.51%

Just got a new hard drive and completely reinstalled windows and fully updated it. It is a 500gb samsung drive, and on startup (before windows loads) one of the screens that comes up distinctly says "500 gb."

But when I go to My Computer it says the drive only has 127 GB. I have heard of the "137 GB barrier" that is supposed to be fixed by the service packs, but mine says 127. Anyone know what to do?

Answer:Computer only shows 127gb

did you install SP2?

9 more replies
Relevance 45.51%

Hi everyone

I've read all of the threads on here (and theres alot) regarding problems similar to mine but after following all the advice given on those threads still can't find a way to fix my own problem.

I am operating Windows XP SP2 and the drives were both fully formatted when i installed the OS (The OS had SP2 already on so i didn't add it afterwards).

I have a Asus P5B MOBO and both drives are connected via Ultra100 TX2 card via IDE

The bios show both drives as being 200GB as it should and i have even updated my bios so it is the lastest revision.

I've included a screen shot of my computer management and also of HDinfo showing that my drives are mean't to be 200GB. I have had this problem for ages and it's really starting to grate.

Advice and solutions greatly appreciated

Answer:My 200GB HDD only shows as 127GB

Just to add a little bit more information to this, yesterday i added two 500GB HDD to my computer via sata and they are working fine at full capacity so that rules out the OS and the BIOS. I thought maybe it was the Ultra100 TX2 card but can't find any driver updates for it on the net.

Still a bit stumped here

3 more replies
Relevance 45.51%

hi there i recently purchased a 120gb hdd and windows xp pro only ever saw it as a 111gb so i thought nuthin of it as i thought well that must be what it see's but then todat i bought a 200gb and still it only sees it as a 127gb
bios sees them as a 120 and a 200 and device manager diplays there name as a 120 and a 200 but when i go into the the volume section and populate them they only come up as a 113gb and 131gb what can i do ?
as i really would like to have all that extra space for movies and stuff
please help

Answer:200gb showing as 127gb

14 more replies
Relevance 45.51%

I have just put in two new HDD drives [SATA] the first a Western Digital Raptor shows up 69.2GB which seems about right for a 74GB drive. However the 2nd, a Western Digital Cavier 200GB only shows as 127GB formatted with NTFS [I think thats it]. Have I been supplied with the wrong drive, or is there somthin I need to do to show more than 127GB?

Answer:HDD: 200GB showing as 127GB

click heretry this link it might cast some light on your problem

10 more replies
Relevance 45.51%

I just got a new Seagate 160gb drive, and after formatting it with Seagate's DiscWizard for Windows, it's showing up in My Computer with only 127gb! It mentions compatibility issues for drives over 137gb... so wouldn't it show 137gb instead of 127gb? Still, that's obviously not what I want either. Now, I'm running Windows XP with SP2, and I thought the 137gb glitch was only present if you don't have SP1... Is this a bios issue?
Anyway, after I saw the drive with only 127gb, I went into disc management and added a partition to the unallocated space (21gb).

So my main question is- unless there's an easy fix to get the full space of the drive in a single partition (that doesn't require booting from a floppy), will my current setup have any possible negative issues in the future? As it is, I have my 80gb system disc, and the new Seagate with two partitions- one 127gb, and one 21gb.
If there's no problem with this, I don't mind having two partitions...

Thanks in advance!

Windows XP SP2
Western Digital 80gb (system disc)
Seagate 160gb
Radeon 9500 Pro
1024 DDR333

Answer:160gb hd showing up with 127gb?

There shouldnt be any problem with multiple partitions in your case.
Ya might need bios update/or there maybe option in bios to enable 48bit LBA?
Or Look here:;en-us;303013

1 more replies
Relevance 45.51%

wel my friend just built himself a new quad core machine, but foe some reason the 500gb hard disk that he bought with it is only being detected as a 127gb HD. the HD is a 500gb samsung HD501LJ, on a gigabyte mobo. he bought the upgrade version of ista, and it is detected as 127 by both XP and vista. he have formatted it and it is still detected as a 127!
what could be causeing this / how do i fix it?

Answer:500gb HD detected as 127gb

re-partition it. its probably partitioned incorrectly.

3 more replies
Relevance 45.51%

It is a 250 gb hdd and when i click my computer and then the drive, it registers 127 total? What the?

Answer:Hdd=250g- Registers 127gb??

Install service pack1a. That should fix our problem. XP didnt have support for big HDs when it first came out but SP1a fixed that.

9 more replies
Relevance 45.51%

I've searched the forum, and maybe I'm asking it the wrong way, but I have a 160gb HD that windows is only reading as a 127gb. My problem is that removed my original 40gig HD and Replaced it with this one then installed a fresh copy of XP professional. I installed XP on the D: drive (a 5gig partition, but for some reason everytime I want to install a program, windows want to use the D: drive as the default instead of the C: drive which has all the room..but that's another problem). I was wondering, if I partition the C: drive using something like Partition Magic, will this free up the extra space that's not visible? Or is there a way to do it in windows XP.

Any help would be greatly appreciated, even if it's just a point in the right direction!


oh, and if you could also point towards a place that will tell me how to change the default drive where programs install this would be great....I recently, accidentaly installed a couple of games on my D: drive and was left with almost no space untill I deleted them (after having played about 45% of the way through)!

Answer:I searched & know why theres a 127gb limit, but how do I fix it?

I have had a similar problem befor. I tried partition magic and yes it works. The extra room will be on the outside of the platter, So if you wanna make the c: bigger, you will have to first move the d:\ slider over to take of the remaining 34gigs. then go to the beginning of d:\ and move that slider to the right to make it smaller, then you will have a gap between the 2 drives. Then slide c:\ over to close the gap. Then you will reboot and it will do it on boot, then presto

4 more replies
Relevance 45.1%

I got a 250gb Seagate Baracuda and since installation it's been showing up as 127GB. I've flashed/updated the bios and when I check the volume/populate via windows it sais...

Capacity: 238473 MB
Unallocated Space: 107411 MB

And below that it sais

Capacity 121062 MB...

Completely lost lol.

Any help would be appreciated as I'm filling it up

Answer:Seagate 250bg Showing at 127GB

try partitioning it to 120gb to 120gb

3 more replies
Relevance 45.1%


I first posted on this topic with a suspected Malware problem which is now fixed.

The problem i am left with now is that i have a 500gb hard drive which was supplied with my computer is NTFS and has allways only had data on it. Before the trouble started there was around 300gb of data on the drive.

I had a problem a while ago with a virus and was advised to reinstall windows. As i wanted more disk space i bought a brand new 1tb hard drive.Whic i installed as a primary drive using the same cables as the old drive. I installed Windows 7 Ultimate 64bit on it and that drive is working fine as is windows. The trouble is my second drive (which is set as a slave) only shows on My Computer as 127gb and is shown as blank.
When i go into disk management, at the top it lists the drive as being 128gb and 100% free, however below where it shows the drives in shall i say rectangles, it shows the drive as 465gb Healthy (Active, Primary Partition). The drive never had any problems before and was connected while i reinstalled Windows. My computer is fairly new and is a Philips Freevents Quad Core (can't remember model number) with 4gb ram.

Any idea of how to get my data back. Or at the very least how to gett all of my drive back.


Answer:500gb drive now only 127gb after reinstall

what does it say in BIOS about the drive? Can you post a print-screen of the disk management window?

18 more replies
Relevance 45.1%

i have 2 160gb hard drives in my computer, but they only register as 127gb.

Thanks for any help.

Answer:Hard drives only register as 127gb

12 more replies
Relevance 45.1%

The computer has a one tb drive, checking properties in Windows Explorer says that 127gb space is currently in use. I used a freeware program "Disktective" to show the amount being used and what was using it. It also says that 127gb are in use, but only accounts for about a third of it. I ran Disk Cleanup with everything checked that could be a cause, but nothing changed. The computer runs fine, but this massive amount of unaccountable hard drive usage is alarming. Is this normal for Windows 7 and if so, can anybody tell me what's causing it? TIA.

John Corliss

Answer:127gb on 1tb hard drive, most hidden. What is it?

There are plenty of windows function that reserve disk space and hide it from you for example pagefile and hiberfile etc
Try a free program called windirstat it should show you where most of the space is

You could also check system restore to see how much of the drive it is using for backups, on a drive that size it inly needs to be a few percent and I suspect yours may be a lot higher, there are a few known bugs with programs like Avast AV that cause this to rise to 50% which is way to much

Control Panel>System>System Protection

3 more replies
Relevance 45.1%

Configuration as of 3 hours ago

160GB HD (Seagate) with a 20GB HP Restoration partiton (D: drive). The rest of the drive was the C: drive.

320GB HD (Western Digital) (L: drive) no partition but had about 114GB currently occupying it.

The 114 GB was from te C: drive.

The plan was to archive files from the C: drive to the L: drive, install XP Pro on the C: drive (wiping the D: drive in the process) and then all would be well.

Current configuration
XP Pro is installed, however now the C: drive, instead of being 160GB is now 127GB and the L: drive isn't called anything because under Disk Management it's labels as "unallocated" and also reads 127GB (God I hope I didn't lose 114GB).

I'm in the process of installing all windows updates, but I still don't know what to do. I keep reading sites that suggest the BIOS doesn't support that large of HDs but I know they were working before and nothing has changed with the BIOS.

So what to do? I'm sorta freaking out.

Answer:AHHHH Possible Data Loss and 127GB HD?!?!

6 more replies
Relevance 45.1%

Just installed my new Seagate 200 Gb IDE hard drive into Pyzchob!tch. I needed to flash the motherboard BIOS to get it to detech the full size under the BIOS, but now i have the problem with Windows Xp Pro only Detecting 127Gb (or 137 394 356 224 bytes) of the hard drive.

I have created the partition with using Partition Magic 8.

According to my calculactions, I should be seeing about 195Gb (or there abouts).

Any one can help me gain more hard drive space on my 200 Gb Hard Drive?

Does any one know of any patches or unpgrade for Partition Magic 8 that might assist me in this?

Answer:200 Gb Hard Drive only showing 127Gb on Win Xp

Have you tried loading SP1 yet? That might help.

9 more replies
Relevance 45.1%

I'm not sure why. I just uploaded xp pro also. Is my processor not big enough, or my motherboard not capable of handling this size of gb or what. Any help would be greatly appreciated

Answer:New 160gb HD only shows 127gb after install ???

9 more replies
Relevance 44.69%


Last year, I installed my 160GB hard drive, but right now it only appears as having 127GB capacity.

I know hard drives always show up as having less gigabytes capacity than it should, but this is a different problem because the exact bytes shows up as 137,427,943,424. My 160GB hard drive should show up as 159,435,345,231 or something similar as its exact bytes and then something like 148GB as total capacity, but its not showing up like this. I don't know what the problem is, but I remember asking a long time ago and someone said it had something to do with the file system.... I'm using NTFS.

Thanks for your help.

Answer:160GB hard drive shows up as 127GB, how can I fix it?

7 more replies
Relevance 44.69%

I just installed a Western Digital 200GB Hard Drive with no partitions, just one massive lump of space. I installed XP Home and it only shows 127GB of space total though. To be sure I checked the properties of the drive as well as Computer Managment under Administrative Tools and have the same thing. Could this be an issue with my motherboard just not being capable of recognizing the amount of space? If so can I (and if so how) update the drivers for my motherboard.

I am not sure how to find out what kind of board I have... its the one that came with the Dell 4500 desktop I bought about 2 years ago.

Answer:200GB Hard Drive showing only 127GB

7 more replies
Relevance 44.69%


I just got an additional 400GB Western Digital Hard Drive for my computer. I set everything up, and everything is correct. But for some odd reason, it says its only a 127GB hard drive. I'm sure this is a soft ware problem, because the same thing has happened with my first hard drive. Hard drive #1 is a Western Digital 250GB (came with the computer) and it says its 228GB. Whats is the problem? Is this just a defect in windows? I have reinstalled my running system twice over the past 4 months for various reasons. So that does not help. Any ideas?

Thanks a ton,


Answer:WD 400GB hard drive limited to 127GB

7 more replies
Relevance 44.69%

ok...i bought a new Western Digital 160 GB 7200 RPM 8mb cache HD

i installed it...formated it with WIndows all the new updates including SP2...yet my hard drive still shows as 127 GB

i updated my mobo bios, mobo drivers, IDE drivers, enabled 48-bit LBA in registy....i tried EVERYTHING but it still only shows up as 127GB...please help me

Answer:160GB hard drives only shows 127GB HELP

I had a similar issue when I purchased my 300GB hard drive..WOW what a bastard that was to get XP to show all 300GB..well 28* or whatever you end up really getting...

Anywho mine was a Maxtor and came with some software called MaxBlast to allow me to set my partition settings and by default all I was showing was 127GB as well. I then installed the software under windows and it let me resize it correctly. Have you loaded the software that came with the drive? I know I didnt cause I didnt think that I needed it.

4 more replies
Relevance 44.69%

My desktop HP P6-2203a has only 1 hard drive bracket but Ive crammed another 1TB WD Blue Caviar in there for backups.(it stays cool) Ive just noticed when I ran my mouse over the system image text it said empty folder but when I opened up manage space in backup and restore, it said system image 127GB? I did a clean install of win 7 not long ago and it didn't work out too well when it came to restoring my documents, photos and pictures.They weren't their just the empty folders?All my downloads were there though.Is there something here I can fix! or is it OK and I should leave it alone?

Answer:127GB System Image but says empty folder?

I know not the answer you are looking for but, would you consider switching to the free Macrium Reflect which many use here without any issues?

9 more replies
Relevance 44.69%

My C: drive appears to be using more space than what I put on it.  When I open my C: drive I have 12 folders listed; three which are using the most memory: Documents and Settings is using 45GB, Program Files is using 10GB, and Windows is using 7GB.  The rest of the folders are using about 3GB so I've taken up roughly 65GB of my 160GB hard drive.  But, my C: drive Properties shows Used space: 127GB, Free space: 15.6GB, Capacity: 143GB.  I know the Operating System and whatnot take up some of the space but it can't be 60GB worth?  What else could possibly be taking up the rest of my hard drive?  Here are my specs: Windows XP Pro, Version 2002, SP 3 (Bought Vista with XP downgrade)Intel Core 2 Duo P8600, 2.4GHz2.39GHz, 2.98GB RAMATI Mobility Radeon 3470, 256MB3 GB PC3-8500 DDR3 SDRAM 1067MHz SODIMM160 GB Hard Disk Drive, 7200rpmDVD Recordable 8x Max Dual LayerIntel WiFi Link 5100 


Go to Solution.

Answer:Put 65GB on hard drive but Properties says 127GB is being used

Check your backups with Rescue and recovery. You can get there by going toStart->All Programs->ThinkVantage->Rescue and Recovery Once program is opened Click "advanced" and then "delete backups"From there you should have a list of current HDD backups on system. If there aren't any here, or not the source of the problem, use Lenovo Tool Box's Disk Space Manager to figure out what is taking up the space. You can get there by going to Start->All Programs->Lenovo Services->Lenovo Systems Toolbox. If you don't see the folder then your system isn't up to date but you can download it manually here.   * P.S. If you are using a windows from Lenovo it will have an hidden F11 partition using anywhere between 10GBs to 20GBs of HDD space. this partition can be removed but contains diagnostic tools and  a back up of windows factory state. 

3 more replies
Relevance 44.28%

cd rom works, dvd does not Tried removing filters from registry, deleting and reinstalling drivers. Still the dvd shows up in my computer and it does not recognize any volume on the drive. Windows 7-64 bit platform. HP Laptop DV7 t 3000 dual DVD/CDR burner AD 7561S. In the property of the dvd unit it shows the model but under details under value it shows only CD Rom. I have less than 30 hours on this dvd player. HP would give me no help except that if the CDR is working, the DVD is also. It is a software issue.

Answer:cd rom reads fine. DVD reads nothing

HP is incorrect. CD and DVD media use different lasers to read/write. So, the CD can still be working but the DVD not. It is still possible the issue may be Windows related. Try booting to a bootable DVD disk. If the drive can read a DVD disk in the BIOS screens then it is a Windows issue. You may need to hit any key when attempting to boot from a bootable DVD. Have you tried accessing a DVD disk through Windows Explorer, or just autorun?

8 more replies
Relevance 44.28%

For all the HL2 gurus out there...

Per my thread here, I've just installed a Geforce 6600GT (AGP). For some reason HL2 is listing hardware DirectX as only Dx8, but shouldn't it be Dx9? (Software is set at Dx9.) I seem to remember seeing someone else having this problem somewhere else but can't find the thread again.

I've also noticed that some textures within the game are either pure black or pure grey... Like some of them aren't displaying or didn't load correctly.


Answer:HL2 reads reads 6600GT as Dx8 rather than 9

I got this too with my Leadtek Geforce FX 5800. Beats me. No missing textures tho

3 more replies
Relevance 44.28%

After searching the internet for help on this problem, I decided to call Hitachi support. This is how I got my HD size limitation fixed. First off I am running windows xp home with sp2 installed. I don't know if this will work for earlier then sp2. It was actually alot easier then I thought it would be. First, go to start right click on my computer then select manage from the menu. This will now take you to computer management. Select disk management and you will see on the right two windows one that just shows your hard drives and cd/dvd roms and then below that a window that shows the info of each one. Here you should see a colored bars that show your partitions, you can also see your unused space, all you need to do is create a partition on the unused space and then now you should be able to have your full hard drive compacity. Also, if you have a slave hard drive you can just create a full partition using the full amount of disk space. If all you have is one hard drive and want a full partition I recommend creating a 25 gig partition for just windows, and miscilainous applications like word, and then partitioning the rest on the second partition, in my experience is increased my windows start up times and efficiency. I hope this helps all who are having the same problems as I was having.

More replies
Relevance 43.46%

Hey everyone. First post. Here goes.

I just bought a wireless adapter (linksys wmp600n) for my new desktop. Installed correctly but it picks up my network as a secured WEP network and not a WPA so my password won't work. Desktop uses windows 7 64bt

Internet works fine on my laptop, which reads it as WPA. Laptop uses vista 32bt with atheros AR5007 wireless card.

Logged onto the router website via and made sure it was set to WPA as well.

Router is netgear WGR614

Anybody have any ideas?

Answer:Laptop reads network as WPA. New desktop reads network as WEP

not to sound silly, but did you change your SSID to something unique, just to be sure it's your network that you are trying to connect to?

2 more replies
Relevance 39.36%

...and be recognised to it's true capacity?

Windows XP (without SP2) only recognises drives up to around 127 gig.

If the drive is formatted thru Computer Management console (with SP2) and is then used to start the install of XP, the installation process doesn't recognise the large volume as being valid (it considers it corrupt/unrecognisable) and requires it to be formatted again (which will then reduce it to around 127gb).

I haven't actually tried partitioning the drive first but don't really want to and doubt it would matter in any case.

I want to use the hard drive, to it's full capacity of 300gb (279gb in reality), as the master boot drive.

Is this possible?

Answer:Can a hard drive larger than 127gb be used as the boot drive...

Hello and Welcome to TSF

No, it will not get the full 300gb, thats just the way it is. There is always so many gb that will not show.

Some Manufacturers say "Gigabyte" when they mean 1,000,000,000 (10^9) bytes. When your operating system says "Gigabytes" it means 1,073,741,824 (2^30) bytes. This means in your OS the drive appears smaller.

1 more replies
Relevance 38.54%

I wanto buy a samsung evo 850 ssd which is expensive for my budget but i think itll be worth it...
I need advice as i dont know if i need the 500gb as opposed to the 250gb.
Ill only be having my os and a maybe 2 games (overwatch and league of legends) and ill only be watching youtube and movies and doing homework via microsoft office. Will 250gb run out easy if i get it?
Thnks in advance.

More replies
Relevance 38.54%

As the subject line says, I'm looking for a 250Gb HD to add a second HD to my main PC.Any suggestions/recommendations?Cheers

Answer:Which 250Gb HD should I go for?

That it's an E-IDE drive that I'm after, not a SATA one.

8 more replies
Relevance 38.54%

Hi guys, I want to connect my ps3 hard drive on pc to use it on pc, so when I get my new computer I can use it with it straight away, but right now I want to use it on my current pc, I plugged in both the one cable and the other one (sata), that goes from power supply cable to the HDD.

when I booted the pc it said installing device drive software, and said, device is ready to use, I go to my computer, and it ain't there, do I have to set it as secondary in bios?

Win7 Ultimate final rev

It's automatically set as fourth IDE master. restarted pc and still doesn't show up, I heard I need to format, is that true? like that to know if I should re-gain windows 7 disk

Oh and t's actually 320gb

Answer:250gb hdd ps3 on pc?

Open up Disk Management (in the admin tools control panel), it should show up in there. I'd delete all the partitions and create 1 new one that incorporates the whole disk. Then format as NTFS.

6 more replies
Relevance 38.54%
Question: 250gb and beyond

Hi all first post and yep theres a problem.... first the specs
MSI 915P Neo2 Platinum board
64bit amd chip
2gb crucial ram 3500
MSI FX5900SP VTD256 ddr
100gb ide
deskstar 250gb ide
deskstar 250gb ide
3 yamaha scsi dvd writers

quite a simple problem you would think....i need both of the 250gig drives to be unpartitioned ( os on one drive). so its down to the 137gb problem. all of the solutions i have read so far is based on the sp1 and sp 2 route .I.e format the drive at 137gig then install windows xp pro and, then update with the pro pack and the drive should be showing at 250gb , im not having too much luck with this approach has anyone any other ideas ?

Answer:250gb and beyond

7 more replies
Relevance 38.13%

I've recently installed a new MSI KT3 Ultra motherboard, and a new 250 gig western digi hard disk. Now, in the bios it recognises that the drive is 250 gigs however when i setup xp it only recognises it upto 130 gig and won't see the full size of the drive.I know 48-bit LBA mode addressing needs to be enabled and as far as I can see it is turned on in the BIOS and as i say, the bios recognises it as 250 gig but windows doesnt and only shows it as 130 gig.Any ideas?

Answer:BIOS Says 250GB HDD... XP says 130?


3 more replies
Relevance 38.13%

hello,i have installed a 250GB Western Digital Caviar HD on my system. but i cant seem to get the full 250 GBi have installed XP PRO and service pack 1 but its showing 233GB and it says that its using 106 GB i dont know what to do to have the full 250GB showing, you guys have any pointers pleasethanksVJP4 3.2Ghz HTAsus P4 C800 E-Deluxe512mb PC3200 DDR RAMSapphire All In Wonder Radeon 9800 ProWestern Digital 250 GB Hard DriveAntec 350W PSU

Answer:cant get full 250GB

The drive manufacturers reckon a kilo is 1000 (reasonable, I suppose), but the rest of the computer world regards it as 1024.So a 250Gb drive is 250/1.024/1.024/1.024 = 233Gb.

2 more replies
Relevance 38.13%
Question: 250gb hd problem

Hitachi 250gb hd, was working fine, everything was ok. It was split into two partitions a 128Gb clip, and a 104 gb clip. The 128gb clip had information on it. Now the drive is recognized in bios properly. When it boots to windows it comes up as 8gb, and has information on it, but I can't access it. One more thing the drive now says fat, when originialy it was ntfs. Under manager, The drive says it is split at 138g and 104 gb. Any ideas? when I run a drive test the drive says it has a bad cable, I swapped the cable out three or four times, to no avail.

I think I have it all listed, oh windows xp home, installed on it's own drive.

Answer:250gb hd problem

Has nothing to do with drivers or Spyware, it is more of a Bios issue. What is the manufacturer and model of the computer that this drive is in? Also, do you have SP2 installed for XP?

5 more replies
Relevance 38.13%

Maxtor 250

Just put a Maxtor 250 GB into my mate's machine, Maxblast3 will only let me have 137GB, Windows XP will only see it as 31.4GB. I've managed to partition & format it in my own machine correctly but when I put it back in his, it F***s up again

I've updated the Via 4in1, the bios is already updated to the latest version

I'm guessing a new MB is in order ??????

Answer:Maxtor 250GB seen as 137

i've had that 2 with my 200Gb, windows only allowed 138Gb
do you have SP1 installed cuz that seemed to do the trick on with my 200Gb

:grinthumb The best of Luck :grinthumb
Greetz Selage

10 more replies
Relevance 38.13%

I just bought a maxtor DiamondMax10 250GB HDD...
and i bought an external case so i can use it on my laptop(toshiba A-50)..

I have used a 400GB external Drive on the same laptop before..
I have also used 200GB external drive before on the same laptop..
all of my previous hdd were western digital....

The problem is:
I wanted to format (partition) the hdd... but the computer said that the capacity (unformatted) is around 2 TB
i tried to format it as one partition, it wont do it...
I tried to minimize the capacity to an acceptable (close to real) level (set it to 230Gb) but it wont do it...

I tried to format it using FAT32, and it worked but to a maximum of 200Gb, it is ok... but the problem is that i can only use 10 GB after that the harddrive gives an error (write-protected)...

1- have anyone used Maxtor drives before as externals???
2- Have any one came across this problem before ???
3- Will it work in a normal PC or not?? (just to format it)... because getting a pc in here is quite difficult

Thanks in advance....

I used the windows XP disk managment tool...
and i used also Partition Magic 8.0....
all with the same results...

Answer:problem... 250Gb Hdd is seen as 2TB !!

What external are you putting the drive in?

3 more replies
Relevance 38.13%

I purchased a new samsung eco drive 1tb hdd to add on to my custom built pc. I currently have the 250gb partitioned with xp on it. I installed XP on the new 1tb and when i have both hdd hooked up, XP gets a blue screen of death with the 250GB... if i unhook either one of the drives and run them alone, they run fine.
I updated the bios, chipset drivers, etc...

More replies
Relevance 38.13%

I have two 250GB hard drive in my pc and I'm trying to install Windows XP Pro SP2. It's running on an Abit motherboard with Athlon 64 dual core 4400+ CPU. I got the computer from a friend and decided to do a clean install so I deleted the previous partions and made a new one. It went through the whole formatting process fine then went through the windows setup. It then did an automatic reboot but right after POST it gave me an error message. It said Trap followed by 0000005c ==============EXCEPTION=========================== and a series of hexdecimal messages afterworsd. I've done this twice and had the same problem and I just wanted to know if you guys knew anything about this?

Answer:Installing Win XP Pro SP2 on two 250GB HDD

Greetings gfx dude, Welcome to TSF!

Firstly, you only need to install the Operating System one ONE of the HDD's not both of them.
The second HDD can be connected as a "Slave" and can be used to 'save' everything that you download, plus emails and other data, such as music etc.
I suggest that you check the CD for scratches and marks; wipe it very gently from the centre to the edges with a lint free cloth.
To give you the best chance of getting Windows? installed without hassles, such as those you are experiencing, is to completely wipe the HDD with Darik's Boot N Nuke.
Wiping the HDD this way will completely erase everything off the HDD and take it back to a RAW unformatted state, as if it had just come out of the factory.

Just so that you do not forget anything when doing the installation, please read this...

The Windows? XP Installation Check List.

1. The Windows? XP SP2-CD (naturally)

2. Darik's Boot N Nuke (Click the coloured Link).

3. Please read this guide.

4. The Motherboard CD that contains all the necessary Drivers etc.

A couple of tips...
a. Darik's Boot N Nuke will take about 4? hours to completely wipe the Drive; however, this will vary depending on how big the Drive is. (That estimate is for a 80Gb HDD).

b. When you get to Figure 7 in 'The Guide', you can create more than one partition here by simply telling Windows? how big you want it. Should you do decide to create an extra parti... Read more

1 more replies
Relevance 38.13%

Hello, I'm hoping I can find a solution to my problem here as I couldn't find one elsewhere on the net.
I have a laptop and currently have a 120GB hard drive in an external enclosure. I have just bought a new 250GB hard drive and have installed it in the external enclosure. Though partitioning and formating the 120GB was a breeze, I've had nothing but problems with the new 250GB.
Below are the specs of what I'm working with. In both Partion Magic and in the Win2000 Disk Management, it correctly displays the 250GB drive (233GB). Regardless of which program I use (ie. Partion Magic, Win Disk Management, command line FORMAT) I get problems.
Generally, what will happen is it will partition fine. Then it will begin to the formatting process (VERY slowly) and then either throw an error either during or at the end of the process. And this is when I try to format a very small partition (ie. 100MB). I have successfully formated a 10MB partition. On a large partition (ie. 30GB) the format process will start but will not progress.
The only two things I can think of is that the drive is faulty, or because I am booting my OS from a floppy there is some sort of recognition problem.
I can't run the diagnosis software from Maxtor because that requires the drive to be installed internally.
So any help to this problem will be greatly appreciated.
Additionally, how long should it generally take to format the 250GB drive in its entirety?

Comp: Toshiba Satellite 2805-S201
OS: Win2... Read more

Answer:What's with the 250GB Drive

HHhhhhhmmm...sounds like a bad drive to me. Do you have a desktop computer that you can use to attempt to format the drive??

4 more replies
Relevance 38.13%

I have looked through previos questions but couldn't find a solution. I have a 250g USB driven HDD not recognised by ny PC. I used the HDD on my TV so I think it will probably need reformatting. When plugged in it appears in Disk Management but without a drive letter and when I right click on the drive most of the options, including allocate letter are greyed out. Any solutions?

Answer:USB 250GB HDD not recognised by PC

I would recommend PartedMagic, it is now paid for software, but at only $4.99 it is a sound investment. Download it, burn it to a cd or put it on a USB stick and boot from it.
Have the suspect drive connected and PartedMagic should be able to see it and it will enable you to format the drive, whatever the existing filesystem is.

4 more replies
Relevance 38.13%

Hi My os : Win10 64 BitSSD : 250GB SamsungBefore posting here I searched here for a solution and i only thread that i find is here l Even if i shrink many of the software out there clones entire disk! Tried Macrium Reflect as per a CNET video, it says not possible to clone to my 250 GB ssd and my C drive is only 105GB with some software like AutoCAD etc.Any solution for this ?

More replies
Relevance 38.13%

Hello, I just ran out of room on my 500GB HDD, Its a 7200 RPM and I like the speed of it. I started looking for a new HDD when I came across an 60GB SSD. I never thought of buying an SSD before. Now I can't decide if I should get the SSD or the HDD ( same price) I need a new drive for linux, but my current drive only has 3GB left. I was going to partition 30GB to linux and keep 30 for Windows. Then transfer my OS to the remaining 30GB, that would free some room. I am a gamer so I need alot of room for games. If I get the 250GB HDD then I would have alot of room for more games and linux. But then I would not be able to boot Windows 7 in seconds. What should I get?

My specs:
Intel core i5 2500K ( stock speed )
MSI - H61M-P20(G3)
8GB of Vengeance DDR3 RAM @ 1333 CAS 7
GTX 550 Ti 1 GB ( Overclocked )
1 500GB 7200 Western Digital Caviar Blue HDD
500W PSU.

Answer:SSD 60GB or HDD 250GB?

Go with an SSD. If you choose the 60GB SSD, you will have just enough space for the OS and a Office Suite and a few other apps before you start to run out of space. If you can afford it, go with a minimum of 128GB SSD as your primary drive, then wipe your 500GB mechanical drive and use as a storage drive.

3 more replies
Relevance 38.13%

hello i have formatted my new Portable HD after 4months but its showing used space 97mb can anyone pls tell me is that normal or is there sum problem ? i mean it should show used space 0 bytes ?

Answer:WD Portable 250GB HD

Is the file NTFS or other i.e. FAT32?

7 more replies
Relevance 38.13%

I do not know what happened.. but I lost... 250gb+ of my files in my laptop. On the HDD where was 40gb free space now there is 326gb..
Most of my programs that I had... they just disappear... same with the movies.. (but for example .3gp files still are there)
Moreover, option "restore system" was disabled...
Those are logs from the OTL.. I dont know if it will help...
Extras -
I gave this laptop to a computer shop.. but all they did was trying to install antivirus.. then they did that checkdisk when you start the computer... before the login window (it took like 2h or maybe even more)... after that I took the computer back...
Now I dont know what to do, because files can be overwritten, due to the system partition.
And giving this laptop to a professional shop that is specialized in restoring files will cost me SO MUCH.
I beg you for help... on the HDD I had very important things
Thanks in advance,
Btw: Sorry for my english.. I hope you can understand everything

Answer:250gb disappear from hdd

Hello, please repost your question with the full OTL log here so we can advance.
Virus, Trojan, Spyware, and Malware Removal Logs

1 more replies
Relevance 38.13%

hi ,everybody i have a dell d600 laptop with a 40 gb harddrive and 2 gb memory . my question is i am trying to install a 250 gb harddrive ,but the laptop doesn't recognise the drive ,so i can't install windows on it . i even bought vista .the laptop won't recognise the drive .help

Answer:250GB Hdd Not Recognized


What do you mean the laptop won't recognize the 250GB drive? Do you mean in the BIOS? When trying to install Windows? You can try to download a linux LiveCD like Knoppix or Damn Samll Linux and boot from that (F9 or F12 at the Dell BIOS) and see if it sees it. If so, format with QTParted or Fdisk and then try Windows again. Maybe the drive is bad.

Let me know if this helps.


1 more replies
Relevance 38.13%


I'm sure this is simple, but I can't figure it out and searching google hasn't found me any answers. I am building a new system. It all works fine. But I have a WD 250GB hard drive I"m using. When I boot from WinXP Pro CD, and go to format the drive and install the OS, it only tells me I can format 130GB of space. Nowhere to be found is the rest of my drive...

Any thoughts as to what I"m doing wrong here?


Answer:XP won't format whole 250GB HD

Hi, if the version of Windows on the install CD pre-dates Service Pack 2, you will get this problem.

Microsoft added the ability for Windows to see hard drives bigger than 137 GB in Service Pack 1 (and Service Pack 2).

If you have access to another PC, download Service Pack 2 (which includes Service Pack 1 btw), and integrate it into your install source and burn a new CD from which you can install. You can find good instructions for doing that here:

You can download Service Pack 2 (full 266 MB package) from here:

As a workaround, you can create a partition less than 137 GB, install Windows, and then install Service Pack 2 and you will be able to access the rest of the hard drive. Then you can partition the rest from the Computer Management interface (right-click "My Computer" > Manage...)

2 more replies
Relevance 38.13%

I've been looking at some of the features in Samsung Magician, and ran the Benchmark test twice. Both times I got very high scores, above the max listed in the program for all 4 tests. I have the drive set to MAXIMUM RELIABILITY. Just wondering about the scores reliability.

Scores in Parentheses are Samsung 's listed maximum high:

Sequential Read
549 mb (540)
Seq write
532mb (520)
Random read
97442 (97000)
Random write
70189 (66000)

Answer:Samsung SSD 840 EVO 250gb

Benchmarks are artificial at best [and a benchmark from the mfg is tailored to that particular piece of hardware] I would think you would get different results using a another benchmark program such as ATTO.

In short do not put too much emphasis on any given benchmark. Modern ssd drives are reliable and it should last for quite a while so I would not worry about the drive.

3 more replies
Relevance 38.13%



Hi and Welcome to TSF!

Please do not type in all caps. It is considered rude and yelling.

How have you gone about connecting the drive to your PC?

Does Disk Management see the drive?

11 more replies
Relevance 38.13%


I've recently reinstall a fresh copy of XP Pro, I got a Gigabyte 8inxp MB, a WD 250GB install on primary channel as Master, with 2 partition, 125GB each

I've also got a Maxtor 250GB connect to ATA133 card

Before, I got everything up and running , then I install Maxtor drive, card, and Maxblast 3

and I have drive C = 125GB, D = 125GB, and G = 250GB(this is the Maxtor)

then I do a boot-from-cd and install a fresh copy of XP Pro
now I cannot see my Maxtor

I tried to use my Maxblast3 software to mount the drive, but it say it only detect the Windows drive, therefore it won't let me run

When I tried to run Maxblast3 in DOS (from a floppy), I have to format and erase everything, I don't want to do that, I have some important documents on that drive that I do not want to lose

all drive were NTFS

Answer:Cannot see my Maxtor 250GB

10 more replies
Relevance 38.13%
Question: Deskstar 250Gb Hdd

I just bought a new deskstar 250Gb Hdd which I am trying to install in my Compaq Pressario S3190UK

I know its got to be set to slave but I wasnt sure if I should set it up as a
16 head, a 15 head , 32 byte clip or auto spin dissable and all of those choises are available on the drive

I went for 16 heads and booted up

In " my computer " the new drive does not appear ( I still see all my original drives there) yet in System/Hardware /device manager it shows up under drives and on clicking its properties it says this device is working properly

Without seeing it in the " my computer folder " I cant really format or partition it so I then tried partition magic
That saw it fine and reported its size correctly . I told it to create an ntfs partition and use all the drive . It changed color as it should and all that was left was to click on make changes now but when I did that it went straight back to tell me the new drive had no partitions created

I tried various combinations, of primary or logical drive , small or large partitions and fat or ntfs but always it refuses the last step of actually creating the partition .
What am I doing wrong ?



Answer:Deskstar 250Gb Hdd

First I will assume your drive is showing up as the full size in the bios and is corrrectly identified.

If you are using either xp or win2k. Go to disk management; start>run type in diskmgmt.msc and hit enter. See if your drive shows up there; it should be listed as disk1, disk0 will be the master drive. If it shows up there, you need to partition and format the drive. Right click on the drive and choose to create a partition; I like extended partitions for data / storage drives. After you create the partition, right click again and choose to create logical drive. You can make the entire drive one partition or organize it into say 3 logical drives; whatever you want. After you create the logical drive you will need to format them. Again right click on the logical drive and choose format. Use ntfs for your drive. In fact if you use partitions greater than 32 gig, fat32 is not even an option.

Just think about how you want it organized before you start.

3 more replies
Relevance 38.13%

My T510 is getting that and i'm not sure if it's enough space or speed.   is $63 dollars worth a 320gb 7200rpm hd?

Answer:Is 250gb 5400rpm hd enough?

whether it is enough depend on how much programs you have and how much you store on the laptop. 

4 more replies
Relevance 37.72%

ive had the hdd for about a year now and its been working fine, i only used approx 1/3 of the capacity. But the other day my m8 was installing Windows 7 on his laptop, so he filled my hdd up with all his backup, and their wasnt any more space left, the next day i plugged it in & the white light was flashing, but i could not go inside it, it just appears as a "Local Disk (F)" on My computer, and the same on my m8's, (and if u double click it, then a sign appears stating that (F) is nt accesible because of an I/O error). oh and i recently changed it from FAT to RAW cuz it wouldnt allow me to move more than 2gb at a time, dnt knw if that mite be important, any thoughts cuz i reeli need the data....?

More replies
Relevance 37.72%

My computer is only showing it has 127.99gb, when its supposed to have 250gb. Anyone seen this problem before?

Answer:HD showing I only have 127.99gb, its really 250gb

read the first sticky on the forum called: 137gb barrier

maybe the same issue as in yours

8 more replies
Relevance 37.72%

My 30gb harddrive in my computer died a few weeks ago and a scoured the stores for a new hd. I found a Maxtor 250gb hard drive on sale at Fry's for $140. It was a great deal for the space but I have some questions on it's performance. It's P-ATA 133 with an 8mb cache,a seek time of 9.3ms and rotates at 7,200 RPM. I do a lot of multiasking with Everquest and just general gaming so my pagefile is huge and constantly used. I also do some video editing.

My real question is how does it rate for my needs. Should I look at buy another smaller hard drive to use as my main or keep use this as my only hard drive?

I have the hard drive split into two partitions right now and am wondering which partion actually is on the outside of the platters so I can properly put the pagefile in it's place? Thanks in advance.

Answer:Some questions about a new 250gb harddrive

I have the drive. Its currently the only drive, and I use a separate partition for the pagefile, but don't see (and didn't expect) a performance improvement. I have a rig with the swapfile on separate drives and it was noticably faster. So I would definately recommend a keeping the old drive - wherever you put the OS, keep the swapfile on the other one.

2 more replies
Relevance 37.72%

Just received and installed Maxtor 250GB HDD.I have a Maxtor 120GB as master drive, partitioned as C,D drive, all OK.Slave drive is the 250GB HDD. Been into Disk Manager and it shows as a 131GB partitioned drive.Been in Bios and it shows as 250GB. Where's the rest gone

Answer:XP will only recognise 250GB HDD as 131GB

click here

6 more replies
Relevance 37.72%

Hey this is my first post to this site so please feel free to nag more info out of me if i dont put enough onMy XP Pro recently got a 250 gb Seagate internal hard drive installed into it, yet it takes around 10 to 15 minutes for it to boot.So i decided in the end to have it as a secondary hard drive and have my 80 gb hard drive as a primary. yet when my 250 gb reaches over 91.9 gb full, it will not load anymore data, instead crash and say that i have lost all data that i was moving.If anyone knows whats wrong or even advice, it will be well appreciated.Thanks in advance.

Answer:Boot Problem XP PRO 250GB

How is the drive formatted ? ?NTFS/FAT32 ?2 things you can check: First in device manager find the IDE controller and then the drive andd right clik it and select Properties...Report back what mode it is in. If it's PIO mode this will account for the extreme slowness.2nd DLoad and run Seatools diagnostics on that drive to determine if it's healthy or not.The file is used to create a bootable floppy/CD so you can run it even if Windows won't run.Report back with your findings...

3 more replies
Relevance 37.72%

Bought a new Western Digital Sata HDD which I got today.
New in anti static bag and labelled WD2500AABS, says on it 250gb.
When I put it in my PC it shows as 40gb.
Thinking this may be an error I booted from Win XP CD to load OS and
it said 38.xx gb.
I have contacted the seller by Email but thought I may get faster and more reliable info from here.
I can of course return it but do not want to if it is me doing something wrong.

Answer:New 250gb Hdd Shows as 40gb

That model definitely shows as a 250GB see here
What version of XP? if you do not have SP3 you may not have support for large drives.
In Windows, click on Start->Run, enter "regedit".
Navigate to the HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\atapi\Parameters registry subkey.
From the Edit menu, select New, DWORD Value.
Enter the name EnableBigLba, then press Enter.
Double-click the new value, set it to 1, then click OK.
Close the registry editor.
Restart the machine for the change to take effect.

10 more replies
Relevance 37.72%

I run win 98se with 2 drives, a 30gb and an 80gb, both work well, but are full. I bought a 250Gb drive to use as a USB external. To try and format the new drive, I replaced the 80 (D Drive) but the new one is only seen as a 65 GB drive. I've tried fdisk and format, Still 65Gb. Anybody any ideas? as always, thanks in advance for any helpCheers

Answer:250Gb drive and win98se

also, if I want to swop it between 2 machines, one win98se, the other XP, will it need to be fat32?

10 more replies
Relevance 37.72%

Hey guys I'm new to these forums so be nice

I just partitioned my 250gb to 100 and 125 one i want to use for back up which i believe i will use my Acronis for.

The other i want to use as a regular hard drive, with windows XP or Vista,

But when i load the XP cd into the computer the XP disk does not see the USB 250gb drive at all (E: and F, how will i got about loading XP onto this drive?

Answer:I partioned my WD 250gb into two seperate ones, now what?

You are done.
Windows is installed on C: no?
The partitions on your removable USB drive can be used for more storage,backups.

5 more replies
Relevance 37.72%

Hi, Does anyone have any experience of this USB External hard drive? I think my Western Digital 'My Book' is going to pack up soon, so need to find a replacement. Yesterday i asked about a Buffalo drive and got some positive responses, but this one looks good too (and tiny in size). Thanks - Tony

Answer:Seagate 250gb FreeAgent Go/2.5

I use a Buffalo drive however, and it's extremely reliable - the only irritation is the incessant humming noise the drive motor makes.

1 more replies
Relevance 37.72%

I am new to this forum and desperate to find a solution to my problem. My colleague told me of this service and here I am.I had a Windows98 PC with an external Maxtor 250GB firewire connected to it. I took the main HD out (the one with the w98) and installed new one and installed a newly purchased copy of XP. At this point I've connected my Maxtor without installing the driver thinking that XP would recognise it, but nothing happened. I installed the driver but nothing? it can be seen in the disk management as disk 1 and that's all; the next step would be a format, which I refuse to do it.I reinstalled my old drive (w98) back into the case, win98 started as normal, I connected the Maxtor and to my big surprise this drive is not being recognised anymore; even when the PC configuration is exactly what it used to be. I only can see the Maxtor through fdisk but not anymore as a 250GB FAT32, apparently now is a 40GB FAT !?!?!!.Please help me. I have far too much data on this drive including pictures going back 4 years and documents. This drive is a back up of my previous PCs. I cannot afford to lose this data.ThanksAndy

Answer:Cannot see Maxtor 250GB Firewire W98 pc --> XP pc

The data's probably there, just need to connect OK. I had trouble with my Maxtor OneTouch when I connected it without the Maxtor drivers installed, even on WinXP. Suggest you install Maxtor drivers properly before connecting. If that doesn't work take the drive to another WinXP comp, but install the drivers first!

10 more replies
Relevance 37.72%

This is just what is says. A fresh win 10 install on a new SSD. Do not explain to me about cloning.

To date I've upgraded the BIOS (UEFI) on a ASUS P67 Performance Gen3 motherboard. I've changed the SATA Mode to AHCI. I can see the drive in the BIOS.

The Windows installer the page where it lists the drive partitions. I only see one drive partio

Drive 0 Partition 1 239.9GB 232.8 GB Primary

I get the error
Windows can't be installed on drive 0 particion 1. (Show Detailes)

The New button is greyed out and when I select next I get

We couldn't create a new partition or locate an existing one. For more information, see the Setup log files.


Answer:New WIN 10 Install on new SAMSUNG EVO 250GB SSD

Hello hiltonr92 and welcome to the forums. See if this will help Windows 10 - Clean Install

Are you installed in UEFI Mode? If so, when you boot from the USB drive use the entry that says UEFI and the name of your USB. If not in UEFI, boot from the name of your USB without UEFI in front of it. Delete all partitions on the drive until it says unallocated and then click the 'NEW" button. The installer will create all the necessary partitions. I hope that helps.

2 more replies
Relevance 37.72%

Hi I have an Acer T135 -S870 and would like to install a 250 Gb SATA drive but it is not recognised in the Bios or through Linux Mint that is installed at present on my 80Gb drive in the T135-S870 Could you help me please in solving this problem.

Answer:250Gb drive not recognised

Have you tried to connect only the new hdd with the same cable of the old HDD?

2 more replies
Relevance 37.72%

Computer info:

HP Vectra
VL420 MT
WinXP Home SP2
LBA on
Intel Pentium 4 CPU 2.00 GHz
HP System board A08
Chipset: Intel i845 Rev: A3
Southbridge: Intel 82801BA (1CH2)
BIOS: American Megatrends, Inc.
Version: JA.01.07US
Graphic Interface Version: AGP version 2.0
Intel(R) 82801BA Bus Master IDE Controller
(did I miss anything?)

I appologize in advance for the long read.

This computer came with only a 10GB Seagate drive. It has less than 300MB left of unused memory, so I tried installing a 250GB Maxtor. It is only recognized as 30GB in the BIOS. I don't understand this because I have WinXP SP2 and LBA is enabled in the BIOS -
Not only that, but I have another 300GB Seagate that I want to install as a slave (I had previously installed this one as a slave to the 10GB but had the same problem with only 64GB being recognized.
I don't understand why my BIOS isn't recognizing it at it's full capacity since I have the latest version of BIOS and LBA is indeed enabled (I thought SP2 was supposed to correct this problem).

My hope is that someone out there can walk me through this step by step (from erasing the disk to installation) because I've been working on this thing all day long and nothing I've tried seems to work. The 10GB drive has to go. I want to install the 250GB drive as my master, copy the 10GB drive to it (I have Casper XP 3.0 for this purpose), and then install the 300GB drive ... Read more

Answer:250GB drive is seen only as 30GB

Did the Maxtor not come with a setup disc .....?
When you go to control panel / admin tools / computer management / disc management and right click on the "free" space of that drive what options do you get?

21 more replies
Relevance 37.72%

I have a 250gb Maxtor Diamondmax10 SATA harddrive. In windows it only reads/writes up toe 233gb, it shows that thats its limit. In everest and every other diagnostic tool (hell even BIOS!) they all say that its 250GB. Any idea how I can get my other 17GB back??

Answer:250gb HD only gets 233gb on Windows!

Upgrading Service Pack might help.

Also goto disk managment and see if theres any unallocated space.

5 more replies
Relevance 37.72%

Bought a new 250 g hd for my box. I want to install xp pro. I am at the stage where it shows 1 partition at 131 gb

Xp pro disk in cd bay, boot disk in floppy.

Any help would be appreciated

Answer:New 250gb hd 131 showing? Partition Help??

Plain-Jane XP by default will only recognize drives up to 132GB. If you create an SP2 slipstreamed CD using autostreamer, it will recognize the full drive upon install. Or, complete your install, update to SP2 and then use the "diskmgmt.msc" command in the "run" line to format the remaining hard drive as a second partition.


12 more replies
Relevance 37.72%

Hi. I need advice on setting up  a M.2 SSDriveMy Laptop is a ENVY X360 Convertible  Model: m6-w105dxI installed a Samsung EVO M.2 250GB but I really can't make it work.It is  neither recognised by bios nor by OS (windows) or any disk management software (samsung magician or intel rapid storage technology, so I have no clues how to solve this.Samsung 850 EVO M.2 seems to be right choise cosidering my laptop specificationsI contacted HP support and they  told me:  maybe is a loose contact between ssd conector and mainboard slot , I've double cheked that and all seems OK. in place and securedThen they told me to disable secure boot and enable legacy boot option @ bios configuration.... no results after that... SSD keeps unseen by my laptop bios and OS...Any expert advice or any success M.2 SSD installation experience would be really nice and appreciated...I've asked on other threads in this forum with no luck..thank in advance for any help on this.RegardsAle

More replies
Relevance 37.72%

I have a 250GB Maxtor Hard Drive that I decided to convert to an external drive when I got my new Dell (bad idea). It worked great for about a month, then one day I get an 'ambulance-like' beeping alarm from the external. I'm relatively certain its telling me the hard drive is dead... most likely from insufficient cooling in the cheap external HD case I bought. But, I dont have any experience with hard drive alarms so i thought I'd ask. Does this alarm mean this drive is dead for good?

Answer:Dead 250GB Maxtor HD... I think

I would check your documentation from your ext. drive case and see what the sound meant. You can always plug it into an IDE cable to check it.

2 more replies
Relevance 37.72%

It has been 3 or 4 hours and... still going.

Drive is a Western Digital 250 (really more like 232) GB, 8MB cache, one touch, external hard drive.

USB2 connection.

Win XP
1.7 GHz Celeron

Answer:how long does it take to format 250GB?

7 more replies
Relevance 37.72%

I tried to ghost my 60G disk onto 250G on a different computer and it finished OK. But when connecting the new drive (250G) to my T60 it would not boot. Booting from Windows CD showed that all directories were ghosted correctly.What could be the problem?


Go to Solution.

Answer:T60 changing disk to 250GB

don't use Ghost use Acronis TrueImage. 

8 more replies
Relevance 37.72%

Hi folks,will my laptop work properly with this ssd? Does anyone have it installed in his thinkpad and can say more about it? Or maybe you recommend another drive thanks for your help

Answer:l540 + 250GB Samsung 840 Evo

Hi Phill7,
Welcome to Lenovo Community!
As per you are query we understood that you are looking for SSD drive compatibility for on ThinkPad L540.
As per the Lenovo technical specification ThinkPad L540 will support 250Gb SSD drive, please click here for complete details on the specification.
The SSD should be 2.5-inch.
Hope this helps!
Best regards,
Hemanth Kumar

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 37.72%

My 4gb USB pendrive appears as only 250mb (EDITED NOW )! What can I do? I have tried using the format option on right click...

Answer:My 4gb USB pendrive appears as only 250gb!

Heh, your complainaing about 246 free gig?

Ok I know you mean meg...

Well I would look in the disk manager in the control panel and see what the partitioning on it is. it may be partitioned wrong. You can delete and repartition it to the full 4 gig. then reformat it again.

6 more replies
Relevance 37.72%

Would there be any conflict with this unit and W7.

I looked at this unit and it appears to me that it would be ideal for my laptop. I need about 120gb for backup of my C & D drives. I'm not sure if this unit is the best and find no place to compare it to other comparable products on the market.

If anyone has used this product I would ask your opinion of its performance and one other question. How long does it take for the first download of all files.


Answer:Seagate Replica 250gb with W7

If your only use is for disaster recovery, then this drive will do the job...That being said, I would recommend the purchase a large external drive that can also be used for storing individual files/folders...

1 more replies
Relevance 37.72%


Just purchased a new Samsung SP2514 250 gig hdd and XP can only see 32239mb.

Tried using samsung's drive overlay to install xp, but gave up + uninstalled it -(the drive overlay).

I booted from the Xp cd + installed but XP only sees 32....gig's.

I have enabled big LBA by using EnableBigLba from to no avail.

From searching through the forums, I see that a BIOS update may be necessary.

Do I also need to update my motherboard + chipset?

If so, are reliable updates available free on the net?

Any step-by-step instructions would be greatly appreciated.

Thx in advance

Answer:[b]SAMSUNG SP 2514N 250GB HDD[B]

16 more replies
Relevance 37.72%


can someone help me - I have recently re-installed XP onto a 250GB hdd but it is only seeing 127gb drive. I have service pk1 and service pk2 installed and the bios on the system is seeing the 250gb drive.

Can someone help me

Thanks in advance


Answer:Re-installed XP wont see 250gb hdd

6 more replies
Relevance 37.72%

Hi I have an Acer T135 -S870 and would like to install a 250 Gb SATA drive but it is not recognised in the Bios or through Linux Mint that is installed at present on my 80Gb drive in the T135-S870 Could you help me please in solving this problem.

Answer:250Gb drive not recognised

Have you tried to connect only the new hdd with the same cable of the old HDD?

2 more replies