Computer Support Forum

notebook 3000 N500 touchpad doesnt work (touchpad funktioniert nicht)

Question: notebook 3000 N500 touchpad doesnt work (touchpad funktioniert nicht)

edit













Solved!

Go to Solution.

Relevance 100%
Preferred Solution: notebook 3000 N500 touchpad doesnt work (touchpad funktioniert nicht)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: notebook 3000 N500 touchpad doesnt work (touchpad funktioniert nicht)

Hi, Today I bought this model and have the same problem. If anyone know the solution, please share it here. thx arghhhh!!!! there, in a top right corner of the laptop, is a sensor button. Just press it and touchpad becomes alive (it dosn't look like a button at all) ADMIN EDIT - There is now an official tip which explains the N500 trackpoint function and the button to enable / disable it.Message Edited by Mark_Lenovo on 03-04-2009 01:28 PM

4 more replies
Relevance 80.04%

Hi AllIve had my E520 open to replace the DC power adapter twice and the cable for the touchpad/finger scanner became unusable.I looked everywhere for the cable to do both the touchpad and finger scanner with no success.So I found a touchpad only cable (so not split in two) but now the touchpad doesnt work at allIve reopened the laptop to make sure the new cable was seated correctly which it is but no joy the laptop doesnt recognise the touchpadIve uninstalled the drivers downloaded the latest ones but laptop doesnt recognise the T/P in Device manager so Im stumpedCan anyone give me any ideas of what Im doing wrong (and any clues on how to find the cable that will do both the Tp and Finger scanner Thanks in advance 

More replies
Relevance 78.88%

Just purchased the above but the touchpad doesn't work, anyone got any ideas why?Thanks

More replies
Relevance 77.14%

I have puchased 2 laptops and switched them on for the first time and found that the touchpad was not working in order to setup I had to use USB mouse. I have resinstalled the driver on one laptop but still does not work, any suggestions 

Answer:Lenovo 3000 N500 4233 Touchpad not working

Have you tried turning on the touchpad button on the upper right had corner of the keyboard by 'soft touch?'  The Touchpad button (along side the volume Up and Down buttons) can appear invisible.  But touching the button would activate the touchpad. Good luck!  Edwardson 

1 more replies
Relevance 103.73%

Model: Dell XPS 15 9530.After a recent motherboard replacement my touchpad doesnt click (as in you cant physically press the buttons) and doesnt register that im pressing the touchpad down. I was wondering whether this is an easy fix or a common issue. Posting from New Zealand but the support over here is pretty attrocious and havent received an email reply for a few days so thought id see if anyone else had similar issues. Was done by a professional so I am wondering why it doesnt work and maybe if he just didnt screw some stuff back up right.

Answer:After motherboard replacement my touchpad doesnt click and doesnt register that im pressing the touchpad down.

Hi,
Thank you for writing to us!
We would suggest you to first uninstall the touch pad driver and then restart the system install the latest drivers from the Dell site .
Use the link for the latest drivers :www.dell.com/.../diagnose
Once the drivers are update check if works fine.
Kindly private message the service tag and email address.
Thanks
Robin

2 more replies
Relevance 102.5%

Hi everybody, i need a Audio Driver for my notebook n500 (4233-38G).The one from the lenovo homepage dosnt work (Conexant Audio Driver; http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-71000) When i unzipp the driver and click on "Setup.exe" -->"Treiberinstallation fehlgeschlagen: Gert fr diesen Treiber wurde nicht gefunden" (Installation for the driver failed: Device for this driver not found) Can somebody help me?

Answer:Need audio driver for Notebook 3000 N500 / Brauche Audio teiber für Notebook 3000 N500

du brauchst den uaa treiber von Microsoft...Microsoft UAA Driver

1 more replies
Relevance 99.22%

Hi This problems a bit odd - I've just bought a new Lenovo 3000 N500 3443 (from Misco.co.uk - they had a good deal on!) Laptop generally seems fine, but the really annoying thing is the touchpad. To get it to react I have to press quite hard - with just a light touch the mouse pointer won't move. I haven't come across that before - is it likely to get better? I noticed the surface to the touchpad is continuous with the covering at the bottom of the laptop - I wondered if that was making it insensitive.

More replies
Relevance 97.99%

Double and triple checked the cable connections. The touchpad doesn't work in WinXP SP3 but it does work in a DOS application. Logged on as Administrator and uninstalled the touchpad driver and installed the latest driver already - did not resolve the issue. Connected a USB mouse and it works. Suggestions?

Answer:N500 (4233-62U) touchpad doesn't work after system board replacement

hey jvanmaas, I would recommend going to the following link :http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72514check the versions here with the version installed on your N500. If there is a difference, i recommend uninstalling the software first before installing the latest version.





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

3 more replies
Relevance 95.94%

Hallo Community, evt. kann ja jemand mit der kurzen Zusammenfassung schneller sein Problem lsen. Nach der missglckten "Migration" von Win7 auf Win10 wegen Blue Screen mit UNEXPECTED_STORE_EXCEPTION und anschliessendem BIOS Update ging erstmal nix mehr. Die Festplatte wurde nicht mehr erkannt. Nachdem ich dann die Festplatte sicherheitshalber kopiert hatte (an einem anderen Rechner) wurde danach Win10 auf der frisch formatierten gleichen Platte (Crucial SSD) neu installiert und smtliche Treiber vom Acer-Support nachinstalliert. Bis auf das verdammte Touchpad lief alles so weit. Keine "unbekannten" Gerte im Gertemanager aber auch leider kein "Synaptics HID-Device" unter "Eingabegerte". Nach vielen veschiedenen Kombinationen bei der Treiberinstallation (Synaptics PS/2 SMBus und I2C Varianten) die alle nichts halfen kam dann schliesslich hier ein Tip von einem michaelmamba den I2C Treiber von Windows 8.1 zu verwenden.  Kaum zu glauben: Der hat auch auf dem E3-112 das ersehnte Ergebnis gebracht und das Touchpad geht nun auch wieder (die Scrollfunktion am Rand allerdings noch nicht). Noch zu erwhnen: Im BIOS ist die Touchpad Einstellung "Advanced" Grupkv

More replies
Relevance 95.12%

Need Help.... I was kinda irritate by the scrolling function, as there is no line drawn and no indicator. Fury Rix

More replies
Relevance 95.12%

I turned of my touch pad using 'FN+F9' and now my 'FN' key is spoilt. Is there away to turn it back on without the 'FN' key?

Answer:Touchpad DOESNT work

  
Quote: Originally Posted by tim123abc


I turned of my touch pad using 'FN+F9' and now my 'FN' key is spoilt. Is there away to turn it back on without the 'FN' key?



HUH?
You have a laptop I think.
What brand and model would be helpful if you want someone to help.

You wrote " 'FN' key is spoilt." What is spoilt?


Thank you

5 more replies
Relevance 95.12%

i got a labtop model (HP envy DV6)i have updated win 10 it was very hard to deal with then i switched it back to win 8.1 but the problems didn't got fixed and it got worth beside some softwares doesn't work anymore and the touchpad is dead and i tried everything by mistake i deleted the hardware also the synaptics  touchpad v1.7 shows this message    i will be very thankfull for your help  

More replies
Relevance 95.12%

my touchpad doesnt work, pointer doesnt respond and clicking doesnt work. when i connect a normal mouse to a usb port the mouse does work. i have reinstalled windows and installed the drive but it both dindnt work. when i tried to to do the hardware test in the menu that you get when you press f2 while booting up my pointer reappeard and i was able to use my touchpad. but when i went out of the menu and went to the desktop the mouse didnt work again.does anybody have a idea to solve it? thanks for the responses in advance!

More replies
Relevance 93.07%

Hallo liebe Community Hoffe mir kann einer bei meinem Problem weiterhelfen.Ich habe mir erst krzlich das Lenovo ThinkPad S1 Yoga gekauft.Hier ist standerdmig der Digitalstift dabei. Leider habe ich das Problem das etwas nicht funktioniert.Wenn ich den Stift entnehme, dann wird er sobald ich ihn Richtung Bildschirm bewege erkannt (kleines Kreuz erscheint), sobald ich dann am Bildschirm etwas antippe reagiert nichts. Also keine Auswahl mglich. Habe mit dem Touchscreen sonst keine Probleme, also  Finger funktioniert. Was kann ich noch machen? Habe bereits den Treiber von Wacom installiert und auch den Bildschirmtreiber neu geladen. Bitte um Rat mfg Gnther

Answer:Digitizer funktioniert nicht

Abgeschlossen:: Habe den Fehler behoben!!

1 more replies
Relevance 92.66%

Hey,
 
Ive recently installed Windows 8. After upgrading my touchpad worked fine but without any gestures.
I've been looking through the web for answers to my questions but so far nothing worked. 
Im able to use the mouse and the buttons normally but im missing my 2 fingers scrolls and other gestures that Windows 8 feature. 
Ive tried installing the latest driver from Synaptics but when i go to settings all i get is Buttons (see picture)
Any thoughts?
 
Link to image
 
Moderator note: images larger than 50k converted to links per forum rules:  Lenovo Community Participation Rules













Solved!

Go to Solution.

Answer:ideapad z360 touchpad doesnt work all the way

The driver you are downloading from chinese site currently, try that.





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

3 more replies
Relevance 92.66%

I noticed this problem while playing an onlin game. I lose touchpad functionality while i press a key on my keyboard. I attempted to fix the problem by setting the palmtracking option to minimum but it didnt fix the problem. What else can i do?

More replies
Relevance 92.66%

I just bought a Toshiba laptop and am running windows 8. As soon as i got it out of the box, i immediately installed my Logitech wireless mouse...but now i notice that my touchpad doesnt respond whether the mouse is plugged in or NOT! i need my touchpad operational but cant find the control on this new Windows 8 layout.
Can someone please help?
 

Answer:Solved: Laptop Touchpad doesnt work

laptops usually have a third party software that controls how the touchpad operates, however even without that software the touchpad has basic functionality. Check your hot keys (the F keys) in case you accidentally disabled it. The synaptics software can also be used to disable the touchpad, so research how to do that for your model and attempt to re-enable it. Since it is under warranty, if you get stuck, contact Toshiba tech support and they will help you.
The Cleaver
 

3 more replies
Relevance 92.66%

Hi all,My laptops left button has stopped working most of the time and I presume its due to dust under the button..Just wondering what the best thing to do about it is?Ive tried blowing compressed air on the button which as helped a little but it still doesnt click most of the time :(Any other ideas?

More replies
Relevance 92.66%

i installed win7 days ago, but any driver of sony can fix the scroll of my touchpad, some help please!

Answer:scroll of touchpad doesnt work win7

Welcome!

Try this driver: Sony eSupport - VGN-FW280FY - Actualizaci?n de Software y Controladores

Good luck!

~JK

3 more replies
Relevance 92.66%

hey guys, so after installing a wireless mouse onto my toshiba laptop, all seemed fine. but suddenly after a couple of days, the touchpad didnt function properly and it also at certain moments, the keyboard disfunctioned as well.

i went onto device manager and found that there was a problem with the ALPS touchpad. wen i try and update the driver it comes up with a "code 10 error". even after uninstalling the wireless mouse the touchpad is still infunctionable.

ive read through alot of forums but none have been of great help, i tried system restoring my comp and opening at a date before installation but there was also a problem with the system restore as it couldnt due to error 0xc0000022.

my most recent attempt was to delete the ALPS touchpad driver and reinstall it. i downloaded the driver of the internet and tried to reinstall but it came up with the error code = 0x00000103 ---> a touchpad error.

atm im quite lost and in need of great help!!!

this computer is also only 2months old running on Windows 7.

Answer:Satellite U500- touchpad doesnt work

Something is screwed up, probably some registry entries.
Check please http://support.microsoft.com/kb/310123 and http://www.instant-registry-fixes.org/how-to-fix-code-10-error/

If nothing helps reinstall OS using original Toshiba recovery image.

6 more replies
Relevance 92.66%

My laptop is HP envy 15t-ae000 CTO which run windows 8.1 . Today i updated my OS and restarted the system and found out that i am not able to use my touchpad.  I tried reinstalling the latest synaptics touchpad driver from the HP support center, but unfortunately it did not fix the issue. I tried to run the HP diagnostics during bootup for the touchpad and was not able to move the mouse pointer. Although the status of the diagnostics run says cancelled rather than failed.  If someone could suggest some probable solutions, it would be of great help. Thanks in advance. Regards,Srijith 

More replies
Relevance 92.66%

Hello everyone. I have one big problem. I reinstalled my 8.1 pro (legal copy, disk been fully formatted) and it was okay for few hours. Next time im starting the laptop, my keyboard and touchpad doesnt work. I plugged USB mouse and keyboard and it works just fine. I went to device manager and besides Standart PS/2 keyboard and mouse icons there was orange triangle meaning that i have problem with drivers. I searched drivers online, but unsuccsessily.. After few hours of trying to fix it, my Standart PS/2 Keyboard turned into Unknown device and now im completely lost. Adding photo of device manager, i hope someone will help me here.

Answer:8.1 pro laptop keyboard and touchpad doesnt work

Since we do not know the make and model of your laptop.
Should try the laptop manufacturer's website to see if you can find the drivers for this. Does look like there missing.

What does it tell you when you right click the ones with yellow exclamation points ?

You can right click and select update driver software, either search automatically or browse your computer, select signed driver from the list is shows you.

13 more replies
Relevance 92.25%

Hallo
Ich bin mit einem Administratorkonto bei Windows 8 angemeldet. Jedoch erscheint beim Updateversuch auf 8.1 jedesmal die Warnmeldung, dass ich mich mit einem Administratorkonto anmelden muss. Nach einigem hin und her und einer langen Googlesuche hoffe ich jetzt, dass mir hier jemand weiterhelfen kann.
Vielen Dank schonmal

Answer:WIndows 8.1 Update funktioniert nicht

For those that cant speak German (thanks to \Google translate)
Hello
I am logged on with an administrator account in Windows 8. However appears when you attempt to update to 8.1 every time the warning that I need to sign on with an administrator account. After some back and forth and a long Google search I now hope that someone can help me here.
Thank you in advance

2 more replies
Relevance 91.84%

Hello everyone!
I have just bought new Satellite Pro L850 with windows 7 64bit on recovery partition.
I have a big problem cause internal keybord doesn't work under the windows. Under the bios i can do everything i want. But from windows first configuration ( i cant even set computer name and user name) , keyboard doesnt work. I have clean windows version ( with toschiba programs - recovery partition).

It seems that is not a hardware problem cause under the bios keybord working.

Extra i have update the bios to newest version 6.50, but didnt notice any change.

Please help me with this issue, cause i dont have any more idea what to do now.

Good day and w8 for answers

pcz

ps. external keybord on usb working!

Message was edited by: pcz

Answer:Satellite Pro L850 - keyboard/ touchpad doesnt work

The whole story sounds unbelievable. Brand new notebook and keyboard is not working???
Install recovery image again and check if the situation is the same. If the problem persists contact your local dealer, explain the situation and ask for exchange.

4 more replies
Relevance 91.84%

After i installed windows 7, my touchpad has a problem that i cannot scroll up and down, how can i fix it?

Answer:T500 touchpad doesnt work after installing windows7

What I did is to install ThinkVantage System Update 4.0, and let that get the appropriate Lenovo drivers.  http://www-307.ibm.com/pc/support/site.wss/MIGR-73695.html

4 more replies
Relevance 91.84%

Hi all, i have some problems with my FN keys, my touchpad doesnt work anymore, in addition to this, when I push the FN key, I dont see any icon on the top of screen.. Two days ago all of this was working properly.. An error is given by the program called Tossiba assist, its written exactly so: this system cant use accesibility.. Could you please help about this problem?
My operation system is Windows vista 32 bit (service pack 1)

Finally, sorry for my English, if I make any mistakes, it is not my native language..

Thanks in advance

Answer:Satellite A350-212 - touchpad doesnt work anymore

Try to restart flash cards.
Start > All Programs > Toshiba > Utilities > Restart Flash Cards

After doing this press FN button several times to see if Flash Cards are shown on the top of the screen again.
If you will see Flash Cards again use FN+F9 key combination to enable touch pad again.

3 more replies
Relevance 91.84%

Excuse me guys,i dont know english but i try to say my problem as good as i can.i have a Lennovo G580(20150) notebookits touch pad work very well when im using battery but when i plugged in my laptop(connect it to ac power),the touch pad dont work anymore untill i plugged it out again.i think that it maybe because of its driver and i reinstalled touch pad driver but it didn't fixed. so what i must to do??whats the problem??  

Answer:Lennovo G580 touchpad doesnt work when plugged in !!

Hi
 
Welcome To Lenovo Community
 
We are really sorry to hear about the issue you are facing,  
 
Please check if you uninstall the drivers for touchpad and then restart the system to check if it works when AC adaptor is connected
 
Also try the drivers from the below link after uninstallation of current drivers
 
http://driverdl.lenovo.com.cn/lenovo/DriverFilesUploadFloder/35701/WIN7_TouchPad.exe
 
 
Do give this a try and let us know  
 
 
 
Hope This Helps
Cheers!!!
 
 
 
------------------------------------------------------------------------------------------------------------------------------------------------------------------

WW Social Media Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!How to send a private message? --> Check out this article.

                        English Community   Deutsche Community   Comunidad en Espaol
 

1 more replies
Relevance 91.84%

www.consumersupport.lenovo.com/us/en/DriversDownLoads/drivers_show.aspx?ID=4458 the download for the file just sends you back to the top of the page..

Answer:Lenovo Y570 touchpad driver doesnt work

direct link

1 more replies
Relevance 91.43%

Hello, I have a Lenovo 3000 v200 0764 2WU. I had XP, but now I installed Windows 7. I installed all the drivers from the Lenovo site, but my touchpad / pointing device still does not work the way it should. I used to have an interface where I could control the settings (such as turn off that annoying touchpad tapping), but now I do not have that anymore. Does anybody know how I can get this working again? Thank you very much.

Answer:Lenovo 3000 v200 touchpad does not work in Windows 7

You probably have an old driver. I've got Windows 7 installed right now and the touchpad works fine. Make sure you're getting the right drivers for the right model. If that doesn't seem to help, get the drivers off Lenovo's site for the V200.

4 more replies
Relevance 91.02%

Obwohl im Bios WLAN/LAN - Switching eingeschaltet ist, schaltet das Gert bei Einrasten in die Dockingstation nicht auf LAN um. Die WLAN-Funktion funktioniert dann ebenfalls nicht mehr.

More replies
Relevance 91.02%

Hallo heut morgen wollte ich meinen Laptop starten aber konnte gleich einmal nicht mein Passwort eingeben, weil die Tastatur nicht mehr funktionierte. Das Touchpad und der Touchscreen funktioniert noch aber die Tastatur gar nicht. Hab auch schon gesucht ob ich irgendwie die Tastencombination Fn F6 zustande bekomm aber per Bildschirmtastatur hat es zumindest nichts gebracht. Mir ist der Laptop weder runtergefallen oder sonst irgendwas. Danke jetzt schoneinmal fr eine schnelle Antwort

More replies
Relevance 91.02%

Hello,

I am using a Satellite Pro S500-139 and am having problems with my F9 key. When i type my palm touches the mouse and send the cursor somewhere else on the page. I have reinstalled the ALPS pointing device and now have access to the advanced setting that i wasn't able to get.

Although i can adjust the sensitivity etc i would really like to be able to use the shortcut to disable the mouse momentarily whilst typing. My keyboard shows that if i press fn and F9 the i should be able to disable the mouse however the function doesnt work. all the other F9 functions appear to work.

Do you know if there is a resolution to this?

I am running windows 7 pro 32 bit service pack 1.

Answer:Satellite Pro S500-139 - FN+F9 button doesnt work to turn touchpad off

What you can try is to reinstall Toshiba value added package.

1 more replies
Relevance 91.02%

Hi all! I have a really frustrating problem.I tried to upgarde to windows 10 and got tons of drivers issues. then downgraded to win 8.1 and still my ELAN Touchpad's driver isnt working. ElanTech's software isnt working, and all of the extra actions doesnt work either. Tried to uninstall and reinstall the driver and still doesnt work. even tried to make a fresh start and did a complete wipe and installing a fresh Windows 8.1 and stil DOEST WORK!! Please HELP!!!

Answer:Z500 touch- Elan Touchpad's driver doesnt work

Have you tried One Key Recovery?

3 more replies
Relevance 91.02%

Hey,

I have a problem whit my laptop
my touchpad doenst work
most times i start up my laptop in win 7 or win vista the touchpad doesnt work.
But sometimes it does and instalt the right drivers for my touchpad and stil it had the problem
i hope someone can help me otherwhise i will sent my laptop to toshiba for repair.

greetz Sven de Jong

Answer:Qosmio X300 - Touchpad doesnt work using Win7 or Vista

Hi

The Win 7 drivers are not released for this notebook.
Therefore your issue could be related to the non-compatible driver.

But in most cases the Vista drivers are compatible with Win 7 and therefore I?m wonder about this issue?

I think you should reinstall the touchpad drivers again?
First of all remove the old touchpad drivers from the system? you can do this in control panel -> Programs and Features
Here you will find installed applications.

On the Toshiba European driver page you will find the Vista touchpad drivers for Qosmio X300.
Note; there are two touchpad drivers; Synaptics & Alps Electric
Both have to be installed!!!

2 more replies
Relevance 90.2%

I have a new lenovo 3000 N200, 0769-ENG (vista home premium sp1) and have problem with the touchpad.The touchpad works with the lenovo driver, but its recognized as a mouse only. So I dont have the option to set vertical/horizontal scroll, the only option available is to configure the buttons.  And the touchpad stops working if I trying the newer driver from synaptics site. The bios thats installed is from october, I dont remember the name but I think its 68ET37WW. Is it possible to scroll with the toucpad at all? or is it a driver problem? RegardsLars   Message Edited by linuxb on 12-10-2008 12:46 PM













Solved!

Go to Solution.

Answer:3000 N200-0769-ENG scroll via Touchpad dont work

Just want to tune in and update this post.Today I got the scrolling and advanced options working for the first time! I installed the latest driver I could find. (synaptics_v13.1.3.0) and low and behold it worked!.I have tryed the latest drivers before with  xp, vista and win7 without luck, so I had given up to get it working. So Lenovo, Thank's for nothing! 

1 more replies
Relevance 90.2%

 Hi there this is my first post I have searched the rest of the forum before making this post and tried all of the other suggestions without success System Information HP Pavilion G6 Notebook PCProduct Number A5H09EA#ABUSerial Number 5CD14477ZKWindows 7 64-Bit Version ProblemWhen windows Starts the light about the touchpad is not illuminated.  It is not on and will not turn on using the 'double tap' method in the upper left portion of the touchpad or the small circular 'indentation. Since it has stopped working I have updated the drivers for the touchpad and no change has happened Sometimes the 'right click' and dropdown button works and the menu appears but no other function works. Sometimes the touchpad works for a short time but it is 'intermittent' and slow and unresponsive. Any help that you could provide would be appreciated











Solved!
View Solution.

Answer:G6 Notebook Touchpad No Light & Does not Work

Hi, First, download the latest Synaptics driver installer on the link below and save it to your Downloads folder. http://ftp.hp.com/pub/softpaq/sp53501-54000/sp53851.exe Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall. When this has completed, shut down the notebook. Unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter. Tap away at f10 as soon as you press the power button to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter. When windows has fully reloaded, open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again. When windows has reloaded, see if holding down the fn key and pressing the spacebar will illuminate the TouchPad. There are also further configurable options Here. Regards, DP-K

6 more replies
Relevance 89.38%

Dell 2-in-1 3147:
The "DELL Pointing Devices" dialog shows a "Disable Touchpad when USB Mouse Present" checkbox. If this checkbox is clear, the touchpad works properly. When this checkbox is marked, the touchpad does not work at all.
I have tried both USB and Bluetooth mice, and neither one allows the proper action: the touchpad should be enabled without a mouse, and the touchpad should be disabled with a mouse.  That's how it works on other systems.  It just doesn't work at all on this system.
I suspect there is some interaction between the touchpad and the touchscreen that is interfering with this setting.  But I have another laptop with a touchpad and a touchscreen, and the mouse detection works there (it's not a DELL).
Yes, I have toyed with the idea of deleting the DELL touchpad control application and installing a "stock" Synaptics touchpad driver.  But I don't want the DELL  "update" app to overwrite it with the DELL touchpad control app every time it sees "the wrong driver" loaded.  And I don't want to take the chance that the touchpad driver and the touchscreen driver are somehow linked together, thus disabling one when I disable the other.
Any ideas on how to get the "Disable Touchpad when USB Mouse Present" action working would be welcome.  

Answer:Inspiron 11 3000 (3147) "Disable Touchpad when USB Mouse Present" disables touchpad ALL THE TIME

I would love to know where to find that checkbox ... Thank you!

Dell 2-in-1 3147:
The "DELL Pointing Devices" dialog shows a "Disable Touchpad when USB Mouse Present" checkbox.

2 more replies
Relevance 89.38%

Hallo, jedesmal wenn ich mein Laptop in den Ruhezustand (zb durch zuklappen) versetze, reagiert mein Touchpad nicht mehr. Ich mu ihn immer neustarten, damit er wieder aktiviert ist... kann mir da jemand helfen?? Danke!!

More replies
Relevance 89.38%

Yesterday , i use touchpad is normal , better speed no problem , last time i use Laptop no update driver automaticly , but today i use my touchpad have trouble , first i use , my mouse can move , i moving right it run right but stop hafl ( max range touch ) , i think maybe for my touch weak , i try again move from right to left , it run hafl , so i think virus on my laptop , i reset my lap . After my lap on , i move again but i didn't move right or left , just up and down although i keep moving left to right and right to left , it still move up and down , can't move left and right . So i uninstall driver , check hp driver touchpad new version , download and install but i still there , i try restart and last time it isn't move , standing in place , i use my mouse usb move normal , what is there problem ? Hardware or software ? I just bought laptop 4 days ago ( if in 1 weakeend pc got problem can trade other ) . Do you think i should trade new ? I tried Hardreset but it doesn't work , everthing , plz answer me fast i got 3 day left .... ( i use win 7 64bit sp1 ram 4gb nvidia GF ... if you need any picture i can take it and sending for you 

Answer:Touchpad of my HP Pavilion 15 Notebook PC (Laptop ) not work...

Hi AndyKiet, welcome to the HP Forums!   I understand that you are having a problem with your touchpad on your notebook. I will try my best to help you with this issue. In this document for Using and Troubleshooting the TouchPad or ClickPad (Windows 8) are steps that may resolve your issue. If this does not work, then please call our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. Country-language selector. I hope this helps, please let me know how it goes. Thank you and have great day!




I worked on behalf of HP.

7 more replies
Relevance 89.38%

My touchpad driver stopped working today afternoon. It was working perfectly and suddenly it stopped and i have recently (last week) purchased it. I uninstalled and the reinstalled the driver but still its not working. Please help me.. Also, please note down my Notebook details:
 
HP Pavilion 15 Notebook PC
{Private Information Removed}
Product number: E3B55PA#ACJ
Windows 8 Single Language 64-bit 
Date of Purchase: 24 Aug. 2013
 
Regards,
Yash Bansal
{Private Information Removed}
 











Solved!
View Solution.

Answer:Synaptics Touchpad of my HP Pavilion 15 Notebook PC not work...

Hello , Please check the following in the control panel, it is possible the touchpad has been turned off.You can enable the double tapping feature on/off feature. 

10 more replies
Relevance 89.38%

Can't use the mouse. The mouse icon does not appear and the touch pad has no effect. When notebook is started, the mouse icon does not appear and cannot access a system to correct the problem

Answer:ASUS Notebook mouse and touchpad don't work

Have you tried this:https://www.ifixit.com/Answers/View...Otherwise let us have the Asus model number.Always pop back and let us know the outcome - thanks

2 more replies
Relevance 88.97%

Hallo, die Tastatur meines Yoga 500 funktioniert teilweise nicht mehr. Betroffen sind die Enter, Space und Backspace Tasten, die hufig bis dauerhaft ihre Funktion verlieren. Ich hatte das Problem vor kurzem schonmal. Als ich das Notebook auf Werkseinstellung zurckgesetzt habe, trat das Problem nicht mehr auf. Seit gestern ca. 16 Uhr (das wei ich so genau, weil ich dort mitten in einer Besprechung sa und pltzlich "lckenlos" protokolieren musste) tritt das Phnomen wieder auf.Der Support konnte mir beim ersten Auftreten nur das Einschicken des Gertes anbieten. Das ist leider keine gute Option fr mich. Updates lasse ich automatisch installieren, daher gehe ich davon aus, dass das System auf dem neuesten Stand ist.

More replies
Relevance 88.97%

Hallo, bisher konnte ich bei meinen Lenovo ThinkPad Notebooks immer nach Eingabe der Modellnummer Produktinformationen ber mein Notebook abrufen. Bei meinem Lenovo P580 funktioniert das nicht.Erhalte immer die Meldung: "Auswahl eingrenzen:Keine Produkte dieser Kategorie gefunden. Bitte verfeinern Sie die Suchkriterien."Welche Mglichkeiten habe ich, um die Produktinformationen zu erhalten?Viele Grewahl01 

Answer:Lenovo P580 per Direkteingabe Produktinformationen anzeigen funktioniert bei mir nicht

Try to download the hardware maintenance manual. In it you will the specification of the unit.Link: http://download.lenovo.com/express/tophmm-idea.html?src=partslist

3 more replies
Relevance 88.56%

Hello, I bought Acer One 14 Z1402 notebook few days before. Windows update was made once. The touch was working fine for 2 days after update and then stopped working. I tried to update the Finger sensing pad driver software (sentelic v9.4.9.9 R4 --> current one), after that the system was restarted. Still the issue continues.Now there is error like "PC is running into problem, it will automatically restart in few moments"  then blue screen appears.

Answer:Acer One 14 Z1402 notebook - Touchpad stopped work...

Elangovan,
 
Try performing a refresh if you can, should that fail, a reset to start over. If you are having issues getting into Windows itself to perform the refresh/reset, here is an article that might help.

6 more replies
Relevance 88.56%

Okay I have been working on this work a while and have exhausted all options, I hope someone can help me. I have a Elitebook 2740p that I have upgraded to Windows 10 from Windows 7. Went smooth except the only problem I have is the flat trackpad the nub for the trackpad works good, but I rather the flat finger pad below the black nub. When I use this the point arrow goes all over the place.  This is what I have done notice installed driver was version 15 deinstalled and installed version 18 of the Symantic driver. That did not work, so I deinstalled version 18 and let Windows install its own driver. That worked except cutting and paste does not work. Is there a fix with trackpad driver that allows the flat portion of the trackpad to work? Awaiting any reply. 

More replies
Relevance 88.56%

Hello, I bought Acer One 14 Z1402 notebook few days before. Windows update was made once. The touch was working fine for 2 days after update and then stopped working. I tried to update the Finger sensing pad driver software (sentelic v9.4.9.9 R4 --> current one), after that the system was restarted. Still the issue continues.Now there is error like "PC is running into problem, it will automatically restart in few moments"  then blue screen appears.

Answer:Acer One 14 Z1402 notebook - Touchpad stopped work...

Elangovan,
 
Try performing a refresh if you can, should that fail, a reset to start over. If you are having issues getting into Windows itself to perform the refresh/reset, here is an article that might help.

5 more replies
Relevance 87.33%

I have an asus laptop .when i go into settings touchpad is disabled so i enable it ,however everytime i start my computer i have to enable it again .i have reverted back to 8.1. can anybody tell me how to fix this issue permanently?

Answer:How do I get my touchpad to work with Windows 10 Asus laptop (touchpad is disabled after I log in)?

I had the same trouble and have had no success rectifying it. Apparently a lot of Asus folk have. Could you tell me how you reverted back to 8.1? I want to do the same.

2 more replies
Relevance 86.51%

Hi, this is very confused for me. Because the touchpad works, but I couldn't switch off it by the "yellow light". It means the yellow light can not be turn on. How to fix this problem?

More replies
Relevance 85.69%

Hallo, mein E560 nutzt stets nur die eingebaute Intel HD Graphics 520, NICHT aber die dedizierte AMD Radeon R7 M370:(A) In den Anzeigeeinstellungen wird nur die Intel HD gelistet      (Systemsteuerung -> Darstellung&Anzeige -> Bildschirmauflsung -> Erweiterte ... -> Grafikkarte: kennt nur Intel HD)(B) FurMark listet als einzige GPU bei GPU1 die Intel HD Ich habe Windows 10 (vorinstalliert), 64-bit. Geprft habe ich: (1) Im Gertemanager sind beide Grafikkarten gelistet und habe aktuelle Treiber (= Aktualisierung bewirkt nichts).AMDDatum: 06.08.2015Version: 15.201.1101.0IntelDatum: 28.10.2015Version: 20.19.15.4312 (2) AMD Catalyst Center ist installiert. Ich habe dies aktualisiert und in "umschaltbare Grafiken - globale Einstellungen"die "maximale Leistung" ausgewhlt. Das ndert an den eingangs beschriebenen Beobachtungen nichts.Bei den anwendungsbezogenen Einstellungen kann ich fr zahlreiche Anwendungen wie z.B. auch Firefox nichts einstellen (Schlo-Symbol) (3) Der Lenovo-Support konnte mir bislang nicht helfen bis auf den Rat ins BIOS zu schauen.Dort kann ich aber keine  Einstellungen zur Grafikkarte machen. Die BIOS-Version ist 1.12. Mit 1.13 ist laut Release Notes nichts dazu gekommen, was mir weiterhelfen knnte. Never touch a running system - ich mache nicht nur aus Spa ein BIOS-Update. (4) Auf http://support.lenovo.com/de/de/products/Laptops-and-netbooks/ThinkPad-Edge-laptops/... Read more

Answer:Thinkpad E560 AMD Radeon nutzen funktioniert trotz neuen Treiber + Catalyst Center nicht

Sorry - wrong language -> see post in German community

1 more replies
Relevance 85.28%

Hi everybody! yesterday I became my brandnew N500 4233-5FG notebook. Here are the specifications:http://www5.pc.ibm.com/europe/products.nsf/$wwwPartNumLookup/_NS75Fxx?open&OpenDocument&epi=web_express A friend of mine and I tried to install Win XP, but most of the drivers from the lenovo support HP dont work. Weve  read  lots of threads in this forum and all over the internet, but nothing helped! Here is what we did till here:1.switch from sata to ide2.forcing the notebook to boot with the optical drive, because otherwise it showed no reaction on the Win Xp CD 3.installing Win XP4.installing the drivers from  http://www-307.ibm.com/pc/support/site.wss/product.do?template=/product.do?template=%2Fproductpage%2...5.Win XP "runs" but almost all the drivers are announcing conflicts and as consequence nothing works (sound, LAN, and so on)6.then we installed the net framework and tried the drivers described by the user voyager in this thread:http://forums.lenovo.com/lnv/board/message?board.id=N_Series_Lenovo_3000&thread.id=8077&view=by_date...7.nothing worked8.then we installed Service Pack 3 for Win XP an tried again the drivers from the lenovo HP.9.there was no improvement, which means there are always the same problems as at the beginning...10. as it was 4 o clock in the morning and we had a very long day, we decided to go to sleep... ;.))   Can anybody help me and/or has  anybody experience with exactly t... Read more

Answer:Drivers for Lenovo 3000 N500 4233-5FG notebook

hm, ive just seen that the link for the specifications doesnt work properly. to get the specs, just copy/paste the whole link (and not only the blue part of it). greets, daniel 

3 more replies
Relevance 85.28%

hi, I have a problem with my new lenovo 3000 N500 notebook.I have Windows Vista Starter and SmartAudio Conexant Systems audio software (I don't know if this is a driver)these are the problems I have:1.- sometimes I can't hear any sound from the internal speakers of the machine. I should restart the computer or turn it to stand by mode, and once restarted I can hear the sound.sometimes I start my computer and I can hear sound since the beggining, but I turn the machine in stand by mode and when restarted I can't hear sound.2.- when I connect headphones I can't hear any sound, never. I restart the computer but I still can't hear any sound. I only hear the typical noise of connected but unrecognized speakers (the soft ssssssssssssss). Please help me thanks for all your attentions













Solved!

Go to Solution.

Answer:problem with sound , lenovo 3000 N500 notebook

Try to update the driver, you can fint it here:http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70898 I hope that works!Vamos Chile!





Regards,Ana

3 more replies
Relevance 85.28%

Hello, my girlfriend has a lenovo N500 laptop and her touchpad just stoped working. She has been running windows vista 32bit for the whole time. I tried updating te driver, deleted and reinstalled the driver but nothing. Is there anything more I can do?Thank you.Jernej

Answer:N500 touchpad not working

make sure to install the alps driver not the synatipc one off the lenovo site both drivers are included when you download and extract the files and are usually found in c:/drivers/touchpad/52tp10ww/alps/setup.exe that is the exact path where all the files get put run that and the pad should come back also the pad my be malfunctioning  lenovo 3000 n500duo core 2ghzwindows 7 ultamate 64bit2gb ram recomend windows 7 on these computers its nice and fast with no problems

4 more replies
Relevance 84.46%

I have a Lenovo N500 5MG and I have some problem with my touchpadI downloded the lastet driver for it and installed successfully. all things is OK but the vertically scrolling does not work how can I fix it? Does this model have horizontal scrolling??? can anybody help me? (sorry my english is very bad)













Solved!

Go to Solution.

Answer:Touchpad Scrolling Problem (N500 5MG)

Have you enable the scroll function at touchpad option?if not, you can go to toucpad system tray or mouse properties.Select gesture, then check "use scroll function".

2 more replies
Relevance 84.46%

Hi, im an ICT Technician at a high schhol and we use Lenovo N500 Laptops for both students and teachers. Since having these laptops ive come across a problem with the mouse buttons twice. The first time it happened i managed to fix it quite quickly but now another has done the same thing and i cant remember how to fix it. When Windows (XP) loads it acts like a mouse buttons is held down, so the moment i first move the cursor a box appears (typical windows drag box). From that point onwards everytime i press the left mouse button the 'right click menu'' appear and right click doesn't do anything. I checked the drivers and checked the settings. Left click is still set to 'click' and right click is still 'menu' although this is not the case.. Ive flashed the Bios, re-installed the touchpad drivers, re-installed windows, booted into Slax, but still remains the same. i remember finding a solution to this on the internet and it was something very simple like a particular keyboard shortcut was enabled although doesnt explain why its still active after ive done what i have already. Any possible solutions anyone can think of would be appreciated. Eamon

Answer:Lenovo N500 Touchpad Malfunctioning

try to download and install drivers from here

1 more replies
Relevance 84.46%

Hi there, I just did a clean install of Windows 7, which mostly seems to be running perfectly. However, my one gripe is that the scroll bar on my touch pad doesn't work, and the touchpad icon I previously had in my system tray (which allowed me to set touchpad gestures, etc) seems to have deserted me. The touchpad itself functions fine, as do the two buttons, so it's not the end of the world, just quite annoying. I've tried installing various drivers for the touchpad, but this doesn't seem to have done anything. Anyway, this forum seems like a logical place to ask for help. Anybody have any ideas? Thanks in advance.

Answer:N500 Touchpad After Windows 7 Installation...

Anyone?

2 more replies
Relevance 84.46%

Hi,
 
im very frustrated. I bought a N500 before 1 day and today..the "second day" the touchpad is not working anymore. I did nothing special so far with the notebook, its not working on the pre-installled vista and ubuntu. so it cant be a driver failure. Is there any special secret key to disable it? maybe i pressed a button wihout care.. 
 
I plugged a usb mouse and its working well, but that could be not a solution because I very need the touchpad working!
 
can someone help me please? 
 
bye
darkstar
 
 
Mod's Edit: System model added to Subject line to improve visibility / clarity










Solved!
Go to Solution.

Answer:N500 - Touchpad not working (Hardware)

Welcome to the forum, darkstar. Try pressing Fn+one of the Function keys(one with rectangular icon and slanted line across). On my Y410, I press Fn+F8 to activate and deactivate the touchpad.

9 more replies
Relevance 84.46%

Anyone having problems with an erratic touchpad on these models?  The cursor responds erraticaly to touchpad movement.  It gets worse if the unit is multitasking.

Answer:N500, N530 TouchPad Eratic

Im not telling you what to do but we removed all Alps touchpad software from the registry and where ever else we could find it .The touch pad works great now.

2 more replies
Relevance 84.46%

Hi,
 
im very frustrated. I bought a N500 before 1 day and today..the "second day" the touchpad is not working anymore. I did nothing special so far with the notebook, its not working on the pre-installled vista and ubuntu. so it cant be a driver failure. Is there any special secret key to disable it? maybe i pressed a button wihout care.. 
 
I plugged a usb mouse and its working well, but that could be not a solution because I very need the touchpad working!
 
can someone help me please? 
 
bye
darkstar
 
 
Mod's Edit: System model added to Subject line to improve visibility / clarity













Solved!

Go to Solution.

Answer:N500 - Touchpad not working (Hardware)

Welcome to the forum, darkstar. Try pressing Fn+one of the Function keys(one with rectangular icon and slanted line across). On my Y410, I press Fn+F8 to activate and deactivate the touchpad.

9 more replies
Relevance 84.46%

HelloMy name is alex. I purchased my N500 model two month ago. In my firs month every thing worked fine, and then...Came updates.After my first update, my system started to show this image when i tapped on the lock button of touchpad (in the upper right corner, the sensetive buttons) : http://i41.tinypic.com/6edem0.jpg<a href="http://tinypic.com" target="_blank"><img src="http://i41.tinypic.com/6edem0.jpg" border="0" alt="Image and video hosting by TinyPic"></a>  well I hate it. every time i disbale the touchpad i get this "nice" messege. 1) How do I remove it? 2) Another update came... great, now the nice button dont want to switch off my touch pad. I mean when tap it the nice messege that mentioned above apear however my tochpad keep working. I think the button doesnt do any thing because the blue light in the center of tochpad does not turn on. I hope you can help me.  Thanks anyway. Alex 

More replies
Relevance 84.46%

do not working on a laptop touchpad, it does not react to touch, please help me!!!  

Answer:Lenovo N500 touchpad not working

Hi irakli-18,
 
Thanks for posting and welcome to the Lenovo Community,
 
I?d like to help you with the issue that you?re facing and first I?d like to ask you above the top right of the keyboard are four touch sensitive buttons. The far right one disables / enables to touchpad.
 
I need to ask you when you press on the other touch sensitive buttons are they working except the Touchpad?
 
Thanks and Best Regards,
 

Soha






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 83.23%

please, can me anyone help how to install touchpad on Lenovo N500 in Win7 becasue its runnig, it claims its working properly but scrool on the right side of touchpad is not working to roll on the pages on internet....there is no driver for win7 on the lenovo help centre site

Answer:Lenovo N500 + Windows7 problems with touchpad

Have you tried a Vista or XP driver. Sometimes they work too.

1 more replies
Relevance 82.41%

Hi,I need working touchpad drivers. I tried various of them, but nothing works properly. Rgds,Kasia

Answer:lenovo n500 touchpad driver win7 64bit

try this

3 more replies
Relevance 80.36%

Hello, at first i would like to apologize me for my english, because i`m from Germany.And now i would describe my problem, a few days ago i recieved my Notebook with Windows Vista Home Premium but yesterday i deleted this OS an set up WinXP Home, and there`s the matter, the drivers from the Website doesn`t support my hardware. I`am sure that i choose the right one, i  searched with the productnumber and with the Modellname of the Notebook, so i downloaded 2 times the same drivers, and no one works. Please Help me! Message Edited by KamiKatze88 on 01-01-2009 12:52 PM

More replies
Relevance 79.54%

This is a brand new laptop with an out the box problem, it came with Vista Business installed but I rolled it back to XP Professional (that is a story on its own). Problem is since first turning the laptop on the mouse pad has not worked, the little blue light between the buttons is on permanently. I can't find an on-off switch or setting anywhere. Fitting a USB mouse works but that not the point. Can somebody tell me how to turn the mouse pad on or is it dead and in need of repair I bought two of these laptops at the same time, the other one is OK Tim













Solved!

Go to Solution.

Answer:Lenovo 3000 N500 Synaptic mouse pad does not work

hello, i had the same surprise when i first started my new N500 yesterday!It seems that the mouse pad is disable by default or one touches the on/off sensor (next to PSU plug). I had to check the manual and just turned it on. Above the keyboard, right side there are 4 sensors (volume up down off and mousepad on/off),If theres a blue light under the mouse bad, it meas it is off  Good luck!

3 more replies
Relevance 78.31%

Buongiorno,da qualche giorno a queesta parte il mio nokebook non trova pi e non riconosce pi il touchpad.Ho provato a ripristnare, formattare, reinstallare il driver,... ho fatto tutto.Qualcuno pu aiutarmi?Hello,my notebook don't reconise the touchpad. I have make format, re-installing driver,... everything possible.Somebody can help me?    

Answer:Touchpad doesn't work/Touchpad missing/Synaptic doesn't work

Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
 

German: HP Kundenforum
Spanish: Foro de usuarios de HP
French: Forum des utilisateurs
Portuguese: Frum dos usurios HP
Chinese: ??????????
Korean: HP ??????
Thank you for your understanding

1 more replies
Relevance 77.08%

Hi there,I tried to rejuvenate my system following what I suspected was some virus. I used the Rescue and Recovery Rejuvenate option..but my system does not start up anymore. I can get into the Rescue and recovery app by pressing the button dedicated to it, but everytime I turn it on all it says is NTLDR compressedNo bootable CD in the drivePress Cntrl+Alt+Delete to restartAnd thats it..everytime I restart this is all I get to see.I retried restoring my system and it just comes down to this dead end. I donot remember having a bootable CD of some sort. What should I do to get it working?CheersMylo













Solved!

Go to Solution.

Answer:Lenovo 3000 C100 notebook doesnt boot up

Not much without a bootable CD. Best way is to get an install cd of the same OS version, asyour system run, and boot from it into repair console. From there you can fix your startup files and probably restore your OS completely.

7 more replies
Relevance 75.44%

I have a Toshiba satellite 3000 PS300c and the touchpad doesn?t seem to be working but the pointer in the middle of the keyboard is still moving the mouse and when i tap on it but the piece on the bottom isn?t so I can right click or use the scroller.

Answer:Satellite 3000 touchpad problem

Hello ericem

Sorry but I have no proper explanation for this. This is pretty old unit and it is possible that the touchpad is defect. Before you try to repair the unit I recommend you to use a small external mouse.

Bye

2 more replies
Relevance 75.44%

Hello to all,can't scrolling with the touchpad. I have the 3000 n200 0769 EMG.I tried  to install other drivers from synaptics and even from dell but nothing works..some body have a solution???thanks...













Solved!

Go to Solution.

Answer:touchpad problems 3000 n200

Have posted about exactly the same problem. (3000 N200  0769 ENG)But haven't seen any solution yet, lets hope Lenovo release a new driver that works with these models.

1 more replies
Relevance 75.44%

ultimamente mi touchpad ha estado fallandoparpadea constantemente(me refiero al cursor)me pasa en ubuntu, Xp, Seveninclusive cuando instalado seven quisiera deshabilitarlopero no se comoen Administrador de dispositivos solo esta la opcion de desinstalartambien lo e echo en panel de control---> mouse ------------------------------ Deshabilitary luego lo habilita S: My touchpad has lately been failingconstantly flashes(I mean the cursor)happens to me in ubuntu, xp, Seveneven when installed seven I would like to disable itbut not asDevice Manager is only the option to uninstalland also the echo in control panel ---> mouse Disableand then enables S:

More replies
Relevance 75.03%

Hi, I would like to use HP Spectre 13 x360-w001nc with docking stationi-tec USB C Flathttps://www.i-tec.cz/?t=3&v=437 to use in combination with 4k TV LCD and therefore I dont wont to have my HP SPECTRE WITH OPEN LID,but in a case I switch the notebook off, and the notebook is connected to i-tec usb c flat docking stationthe notebook power button on the side doesnt work  then, so I cannot switch the power on , until I open the lid of thehp spectre. (it work only when the comp is in sleeping mode - the button blink) Please help me where can I change this func to be able to push the power button on the hp spectre on , regardlessthe lid is open or closed. Is there any soft to change the setting so I will be able to see everythink on the second monitor (TV LCD ) and the hp spectre lid will be black ? not on also ? somethink like automatic change monitor (not both) or it is not possible and the hp spectre lid will be always on  regardless I use another extrernal lcd ? Thanks for help and tips      

More replies
Relevance 74.62%

Hi,My touchpad of Lenovo 3000 G530 is not reponding despite re-installation of the Alps driver.Should I return it to the service center. There is a button in the up right  to turn the touchpad off. Sorry for bothering. .

More replies
Relevance 74.62%

i have a problem with my mouse touchpad.it's working, but when i view websites i cant roll down by touch in the touchpad sideways. the problem begins when i installed Windows 7.can't roll down/up from touchpad...i tried installing the drivers for Windows Vista it didnt helpdid i do anything wrong? or is there any specifiec drivers for windows 7 that i didnt locate?

Answer:Lenovo 3000 N200 TouchPad problem

Hi roeibi,
 
Welcome to the Lenovo Community.
 
What you require is the Synaptics Touchpad Driver. If you have a Lenovo 3000 N200 0687 or 0769 and have installed the Touchpad Driver for Vista and didn't work, there's a similiar discussion that was posted in Windows 7 on 3000 N200 0687? that resolves this.
 
The resolution was to download the:
Synaptics Touchpad Driver for Windows 8/7/XP/Vista 64/32-bit Edition v16.2.21.
 
You also might wanna check:
1. How To Configure Synaptics TouchPad Settings In Windows 7
2. Synaptics TouchPad Won't Scroll
 
 
Let us know if you encounter some problems.
 
 
Cheers.

1 more replies
Relevance 74.62%

this has to be one of the weirdest problems ive ever encountered on a Laptop or PC, and i hope someone out there has an idea as to why this is happening. the touch pad isnt working properly when i try to move the pointer is more or less just sits there doing nothing occasionally it will move disjointedly, however when i place my hand / thumb under the laptop where the touchpad is the touchpad works fine although using it like this gives me a cramp. i know the touch pad is on, just for a lack of any other idea i reinstalled the driver didnt fix it. i also tried increasing the sensitivity of the pad in the touchpad options, this helps alittle (still alittle disjointed) till the pc is rebooted then no good again what i suspect is there could potentially be a leakage of power and by placing hand, thumb under the laptop in that spot im completing the circut that allows it to work which is kinda worrying considering the HD is located directly below it. the buttons all work fine and keyboard works fine ive had to replace the power cord recently as the other one became too worn to safely use. any ideas as to why this is happening and more importantly how to fix it?

Answer:Touchpad probs Lenovo 3000 C200

You may have a loose ribbon cable to the touchpad, or it may be failing.Look for the service manual for your model if you want to attempta fix yourself. StartHERE

1 more replies
Relevance 74.62%

does anyone have  a touch pad driver for my 3000 N200 for windows7?













Solved!

Go to Solution.

Answer:3000 N200 TouchPad driver for windows 7

Two options:Install the Vista driver in compatibility mode.Download driver from touch-pad manufacturer.(Synaptics most likely)I have used Both methods on N100, both work.

5 more replies
Relevance 74.62%

I have been dealing with a loss of my touchpad\curser for awhile now, so have had to plug in a mouse. Yesterday I ran epsc pre boot assessment which took a good 1\2 hour I guess. After the program was completed, I was able to use my touchpad/mouse on the epsc program interface until I rebooted, than lost the touchpad\mouse. Thanks Keith
PS: In order to get out of the epsc program I had to reboot
 

More replies
Relevance 74.21%

Ive seen 1 post about a similar problem but noticed you guys never really paid attention to his post.

tired adjusting the settings under the touchpad application, no success
tried uninstalling from device manager, no success (software doesn't want to uninstall)
tried looking for software in programs and features, found nothing
tried to overwrite existing software by downloading the drivers again, install fails
Ran diagnostics on mouse and keyboard, just keeps running for over 30 mins and i cut it off maybe im not doing it properly

please help guys
Please help guys

Answer:touchpad doesnt zoom/scroll inspiron 13z 5323

hi
I had same issue, and solved with this: downloads.dell.com/.../Input_Driver_FGG85_WN_8.1200.101.214_A02.EXE

regards;)

1 more replies
Relevance 73.8%

Hi AllLooked everywhere for this solution. Without notice the touchpad on/off screen control pops up without any input from me. The touch sensitive button located on the top right hand side will illuminate. I can close the screen down but it will immediately pop back up again. The only way to get rid of it is to reboot. Sometimes even this won't work.Its a really anoying problem because it overides everything waiting for an input request. Even when i'm doing a presentation. Installed new drivers, still no joy. Only happens 50% of the time.Any help would be appreciated.......

Answer:N500 Touchpad control screen pops up on screen without activation

have you tried to re-install or update touchpad drivers?

5 more replies
Relevance 73.8%
Question: Notebook Touchpad

Is there any way to disable the touchpad on my laptop as i prefer the mouse, I am using XP Home

Answer:Notebook Touchpad

May help to post make of laptop,This fix was created for laptops in windows xp when using a PS/2 wheel mouse for a problem.You may be using a usb mouse but the method should disable Touchpad which is what you require?Create restore point if you decide to use incasereversing is forgoten(you could copy/print for to reverse off).click here;en-us;282753click here;EN-US;225810How to Create a Hardware ProfileNOTE: The modem should be active in each hardware profile for dial-in or dial-out connectivity. 1/ Click Start, point to Settings, click Control Panel, and then double-click System.2/Click Hardware, and then click Hardware Profiles. Note that under Available Hardware Profiles, either the Docked Profile or the Undocked Profile (Current) profile is selected.3/ Click Copy, type a profile name such as Out of Office, and then click OK.4/Click the Out of Office profile, click Properties, click to select the This is a portable computer check box, and then click to select the best description for the profile. In this case, click The computer is undocked.5/If you want to be able to choose this profile when the computer starts, click to select the Always include this profile as an option when Windows starts check box.NOTE: This is how you can configure your computer to enable you to choose either the "Docked Profile", "Undocked Profile" or the "Out of Office" profiles when you start your computer.6/Click OK, click the Docked Profile or the Undocked Profile (Current) profile, and then cli... Read more

1 more replies
Relevance 73.8%
Question: Notebook touchpad

I plugged a Logitech USB Optical Mouse into my SONY VAIO, unplugged it and now the laptop touchpad & buttons have stopped working! Tried recovery disc's to restore defaults with no success.

Answer:Notebook touchpad

Look in the BIOS and see if there is a touchpad configuration feature that got disabled.Alan <><  

6 more replies
Relevance 73.8%

This is just a corny thought, but i have an HP notebook. Not tablet or anything like that, just ordinary/dayafter thanksgiving junk. It has the standard touchpad in it. i want to know if there is anythining i can stick on the end of an old lead pencil or something that will move my mouse so i can draw stuff in paint or photoshop or whatever i need to use? I heard a gummy bear will work, can anyone confirm this before i go ahead and get my touchpad gooey??! Thanks for the help.
 

Answer:Notebook touchpad...

first thing that comes to my mind is to just by a stylus for a buck or 2. (the king that you use on a PDA). or u could put some scotch tape around the pencil tip.
 

2 more replies
Relevance 73.8%

I have been dealing with a loss of my touchpad\curser for awhile now, so have had to plug in a mouse. Yesterday I ran epsc pre boot assessment which took a good 1\2 hour I guess. After the program was completed, I was able to use my touchpad/mouse on the epsc program interface until I rebooted, than lost the touchpad\mouse. Thanks Keith
PS: In order to get out of the epsc program I had to reboot.
 

Answer:Dell Inspiron 15 3000 Laptop Touchpad Not Working

Well, that's good news in a way - as it means that the touchpad does work!

I've got a few questions to see what we can do to fix it:

Which OS are you using? Is it Windows 10 like before?
Are there any items showing in device manager that are missing drivers? They'll be marked as "unknown" or have an error icon next to them.
Assuming it's Windows 10, can you download and install the "Synaptics" touchpad drivers from here please:

http://www.dell.com/support/home/uk/en/ukdhs1/product-support/product/inspiron-3000/drivers

If that doesn't fix it. Can you type "touchpad" on the start menu search and then see if the "on/off" toggle is enabled. It also may be worth looking at "Additional Mouse Options" on that same page to see if anything looks problematic there.
 

21 more replies
Relevance 73.8%

Hello,I've installed Windows 7 professional the touchpad works fine but I cannot find the touchpad tools where I will be able to disable some of the functions or totally disable the the touchpad temporarily.Can anybody help?Zvika

More replies
Relevance 73.8%

Hello,This is my first post. I have been using my G530 for a couple of years and have been really happy with it. However, suddenly yesterday the Touchpad mouse stopped working. Neither the touchpad nor the left or right buttons are working. I have tried to update the driver and have tried all other suggestions, but I cannot get the touchpad to work.Any suggestions? Also, I have been having a problem with my screen flickering / flashing up and down, whilst this is a frequent problem it does mainly occur at start up and once past the login section the problem tends to go away.Any suggestions on improving this? I would really appreciate any comments about one or both problems.Thanking you.TK

Answer:Lenovo 3000 G530 Touchpad mouse & screen

hi TK,
 
Welcome to the Forums.
 
Regarding your issues:
1. For the Touchpad, try to turn the computer off and press the OneKey Recovery button and observe the touchpad functionality. If it doesn't work, try to re-seat the Touchpad cable that attaches to the mainboard and on the keybaord bezel (see this disassembly guide)
 Spoiler (Highlight to read)
2. For the flickering issue, this is commonly caused by a bad/loose LCD cable or a faulty LCD inverter (see this G530 full disassembly guide). If re-seating the LCD cable doesn't fix it, you will need to replace either the LCD cable, the LCD inverter, or both.
 
 
Hope this helps

1 more replies
Relevance 73.8%

So I just started exploring my new Lenovo 3000 Y500 laptop pre-loaded with Windows Vista. After being something of a Linux explorer for a while, I decided to take the leap and install Ubuntu 7.10 on my machine only to realise on running the Live CD that my touchpad and keyboard do not work. Driver support problems? Is there a fix for this? Is there something I'm missing? Would it help if I switched to a different distribution?

Answer:Touchpad+Keyboard support in Linux for 3000 Y500

Use a uSB keyboard and mouse and use the following commandsudo gedit /boot/grub/menu.lstin it edit the kernel line totitle        Ubuntu 7.10, kernel 2.6.22-14-genericroot        (hd0,2)kernel        /boot/vmlinuz-2.6.22-14-generic root=UUID=2946bc29-bb7c-466c-823e-86394c27eed3 ro quiet splash locale=fr_FR i8042.resetinitrd        /boot/initrd.img-2.6.22-14-genericquietfromtitle        Ubuntu 7.10, kernel 2.6.22-14-genericroot        (hd0,2)kernel        /boot/vmlinuz-2.6.22-14-generic root=UUID=2946bc29-bb7c-466c-823e-86394c27eed3 ro quiet splashinitrd        /boot/initrd.img-2.6.22-14-genericquiet

4 more replies
Relevance 73.8%

Just purchased a new Inspiron 15 3000 series laptop and booted it up for the first time today.  I am having difficulty figuring out the touchpad, specifically the scrolling.  It worked initially during set up, but then once I had that done, I can no longer get it to scroll - at all.  I have looked through all settings, and it seems like everything is right.  The drivers are up to date as well.
What can I do?

More replies
Relevance 73.8%

Hi all, I have a Lenovo 3000 v100, and I use it almost everyday for the past 3.5 years or so. I like/don't mind using the touchpad so for the most part, I do not have a mouse attached. I noticed that the left touchpad button is started to fail, because I'm missing 1 out of 3 clicks and dragging things is almost impossible. I either can't start dragging or drop the items half-way... I want to replace the touchpad buttons. But I can't find anywhere to order them. I guess they are not in the FRU list. Any ideas where to obtain them from? I checked ebay but couldn't find them there either.  Best regards,Batu. 

Answer:Where to purchase Touchpad Buttons - Lenovo 3000 v100

You may need to buy the whole touchpad/bezel.Or something like THIS on eBay. EDIT: Looking in the Hardware Maintainence Manual HEREit appears that touchpad is integrated into the Keyboard Bezel assembly. For FRU look under Parts List>Overall>Keyboard Bezel 

9 more replies
Relevance 73.8%

Hi everybody! My two notebooks are both Lenovo 3000 n200 typ 0769. One of them: model EAG is running on WIN XP and everything is all right. Second: model ERG, is running on vista home basic and I have two problems: 1. Touchpad is not working as it should. Scroll areas are not working (both vertical and horizontal) and I don't know why... I have tried to add new drivers from synaptics website for vista (ver 10.x.x.) but it even stop my touchpad to work:/ Standard drivers given by lenovo in preinstaled vista are not providing this option  2.  How cam I disable bluetooth while usuing wireless internet? In XP I downloaded new drivers from broadcom, and that I get access from tray icon to enabling/disabling options. I tried the same trick in case of vista, but it is not working. Tray provides only options concerning connection of other devices etc... Can anybody help me?? maybe you also have the same problems?? 

More replies
Relevance 73.8%

I had to open the laptop casing and used this to wipe the usually hidden edges of the sensitive surface of the touchpad with a damp cloth. After reassembling and starting, the touchpad seemed working as the pointer responded to the touch. I had to re-attach the keyboard. After that the touchpad was not recognized. The connection to the mainboard seems fine but I re-plugged it. If relevant or not (assuming the touchpad is responsible only for moving and clicking), if the pointer happens over a link, the URL is shown, that is the pointer is active. 1) The connection to the touchpad seems to have no plug, i.e. is soldered, and I didn't check it. Should I, even after a short intervention that I did? 2) There is a dark glossy bulging surface ca. 1x.5" on the bottom (back) of the touchpad. Just in case, should this be open or covered? 3) Should I need a replacement, how do I find compatible ones?

More replies
Relevance 72.98%

My cursor was drifting on my Dell Latitude. Was told by technician it had a virus, so he took it and said he would reinstall Windows. When i got it back he had uninstalled the touchpad and installed a mouse. I installed Alps pointing device driver to no avail. What can i try next. Thanks for your time

More replies