Computer Support Forum

Can't create a factory recovery disk using the recovery partition that came with my computer

Question: Can't create a factory recovery disk using the recovery partition that came with my computer

When I push the Q: recovery drive> Create recovery media, I get a message saying "Windows cannot find 'C:\Program Files (x86)\Lenovo\factory recovery\recovburncd.exe'. Make sure you types the name correctly, and then try again."How do I go about fixing this and creating a recovery disk?

More replies
Relevance 100%
Preferred Solution: Can't create a factory recovery disk using the recovery partition that came with my computer

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 85.26%

Hello, I don't have the recovery partition on my system anymore, but would like to reset my Ideapad Yoga 13 to factory status. Is this possible somehow? All the guides I've seen assumed that my recovery partition was still intact. Thank you for your time. Regards













Solved!

Go to Solution.

Answer:Create Recovery Media/Do Factory Resect without Recovery Partition

To reset your PCSwipe in from the right edge of the screen, tap Settings, then tap Change PC settings.(If you're using a mouse, point to the top-right corner of the screen, move the mouse pointer down, click Settings, then click Change PC settings.)Tap or click Update and recovery, then tap or click Recovery.Under Remove everything and reinstall Windows, tap or click Get started.Follow the instructions on the screen.NoteYou'll be asked to choose whether you want to erase data quickly or thoroughly. If you choose to erase data quickly, some data might be recoverable using special software. If you choose to erase data thoroughly, this will take longer but it makes recovering data less likely.
 
 
Refreshing your PC without affecting your files

If your PC isn't performing as well as it once did, and you don't know why, you can refresh your PC without deleting any of your personal files or changing your settings.

Note
If you upgraded your PC from Windows 8 to Windows 8.1 and your PC has a Windows 8 recovery partition, refreshing your PC will restore Windows 8. You?ll need to upgrade to Windows 8.1 after the refresh has finished.


Warning
Applications you?ve installed from websites and DVDs will be removed. Applications that came with your PC and apps you've installed from the Windows Store will be reinstalled. Windows puts a list of removed applications on your desktop after refreshing your PC.


To refresh your PC

Swip... Read more

2 more replies
Relevance 84.1%

There are discussions on creating recovery disks with OneKey Recovery 7.0. But my G500 is  with win8.1 and Onekey 8.0. I didn't see it support creating CDs. And when I tried to create such a recovery image, OneKey 8.0 said it needs 90G space. It looks like OneKey will backup all files from my C disk. I just want to create factory recovery disks, in case the HDD failed. Can anyone tell me how to create such disks? (It doesn't make sense to spend 60$ to order such disks from Lenovo)

Answer:how to create factory default recovery disk with OneKey Recovery 8.0? (G500, win8.1)

hi lenovo-user-kw,
 
Thanks for Posting!
 
Yes that option is not available on Windows 8 and 8.1.
 
This is tha way i think possible to extract a recovery media
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076024
 
 
Regards
Solid Cruver





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 81.2%

Hello!I just bought a Lenovo IdeaPad with a windows 7 32 bit version. There was no system disk added. I learned that the windows 7 version is hidden in a recovery partition. I now want to create a system disk to save the windows 7 32 bit version just in case and install a windows 7 ultimate 64 bit version on the computer. Can you tell me what I have to do? Thank you!

Answer:How to create a recovery system disk from the hidden recovery partition?

Hi and welcome,
One way is to save a recover set ... with OKR ... or better do this Backup before  ...but no way to get a  pure Windows 7 Install Disc if you mention this  ...  
 
And Windows 7 64 Bit will not run on Atom based machine.. i.e. S10/S10e/S10-2 ,S12 Intel/Nvidia ...
(and even when, it lacks of memory 2GB (due the intel chipset restrictions) is good for 32 Bit based systems, but not really enough for 64 Bit based systems, so there is no benefit for use a 64bit on a netbook)  
S10-3t W7 64 ?
 
sincerely KalvinKlein 
-------------------------------------------------- -------------------------------------------------- --
Want more ? For further information to get the most of your S-Class machine 
Lenovo Energymanagement Backup  Windows 7 Driver Windows 7  Install
XP Startup  Small WebCam Guide  Lenovo Easy Capture    Clean XP Install
Resolution > 1024 x 576 / 600  Works with XP Only Try this for a Windows 7 Solution 

1 more replies
Relevance 78.3%

I bought my z5070 with HDD in it now it is so slow, so i bought SSD, i want to create a recovery partition as the one that came with the basic HDD(the one that we use to restore from using OneKey Recovery), so how can i create it?? or at leat coping it. i tries with the acronis that came with the SSD but i always fail "not supported file system" or something llike that the acronis gives me

More replies
Relevance 76.56%

I am trying to use the recovery media to install the factory settings W7 to a newly installed Intel 310. I have installed the 310, and it is definitely there and recognized by the computer.  I have removed my HDD and plugged in a DVD drive.  Also on hand are the successfully created recovery media (1 CD + 3 DVDs). I put in the CD and boot via the DVD drive.  The Windows screen comes on and then it goes to R&R.  From there, I cannot for the life of me figure how how to start the ball rolling on installing W7 to the msata drive.The two options presented appear to be to install a previous recovery backup, and none are listed.  Or to recover from an image, which then takes me to a screen that does not seem to identify an image no matter which of the four recover discs I put in. Is there any Lenovo page that shows step by step to re-installing recovery media from disk?  I'm not a complete newb so this is frustrating. My only guess perhaps is that I need to create a partition on msata before starting the factory recovery.  Not sure why that would be the case in that the factory recovery probably has utilities built in to do so, but I can't think of anything else. Thanks for any help.

Answer:Do I need to create partition on msata before factory/recovery install?

I used the Recovery CD/DVD too.  As you did, I removed the original 320GB drive.  Then I did format the 310 SSD and had no problems. Jim

5 more replies
Relevance 75.4%

Just setting up new computer and I keep getting this error when trying to create recovery media.Any ideas?If I click OK, it goes through the process and creates a DVD with 2 small files on it.Tried with USB (after resetting recovery.ini) and got same error 

More replies
Relevance 102.91%

Good Morning to All, I am using Windows 10 Single language Home edition on Intel i5-4210U CPU @1.70GHz, 2.40GHz, with 4GB RAM and 1TB hard disk. I deleted my recovery disk by mistake. Now I want to create 2 more partitions, one for data and other for REcovery disk. How do I Do it. Also I want to create recovery disk. How do I do it and what should be my partition sizes. Thanks

More replies
Relevance 102.09%

I purchased last week ideapad s10-2 from microsoft store online which came preinstalled with windows 7.   Questions: 1.  Is it possible to create factory default disk/recovery disk on an external usb dvd/cd drive as the netbook has no optical disk drive2.  If so is it possible to recover from the exteral recovery disc created in case disk crashes I spoke to lenovo tech support in the US and they said they do not support these in netbook.   I read other posts on this forum and none of them talk about windows 7. Any information will be appreciated. Thanks,Shiva

Answer:Possible to create factory default/recovery disk on s10-2 with windows 7 sold by microsoft store?

If it has OneKey Recovery, and it works the same as the version that comes with the S12, then yes, you can create Factory Default Recovery Disks using an external usb cd/dvd burner. One would assume that you can do a recovery this way too.





Scott

4 more replies
Relevance 101.68%

I have a K430 and before I use it it (as with any machine I have bought) I wanted to make my recovery disc(s). Throughout this website there are guides to do this with version 7, but this desktop has version 4.0 of OKR I can save an image of my system partition but need the ability to install on to a clean hard drive in case of hard drive failure.  I have checked the Kb and forums and been through the Windows 8 programs but nothing points me the right way. This is compounded by the fact that none of my drive imaging tools like the Seagate drive that was shipped in this machine (Ghost4Linux, CloneZilla, Acronis Easy Migrate)  Where is my option to create said media? 













Solved!

Go to Solution.

Answer:How to create Factory Default Recovery Disc with OneKey Recovery 4.0

Just to close this one. I spoke to customer support on the phone as this post remained unanswered, There are no recovery disc to buy or create for this machine, so should the hard drive fail you would need to source your own discs. This machine will now be returned, a lost sale for the sake of a DVD. Must say the guy I spoke to on the phone was really helpful and courteous, sadly held back by company policy.  

1 more replies
Relevance 101.68%

Hi all I need some urgent help, hopefully i can get some advice.

I accidentally used the cmd prompt and clean and created partition primary wrongly on the wrong disk. Can i know is there any way to recover the data inside? please help... this is what i did below...
Please advise me how do i get back my data and also label it as d drive.

I have downloaded active file recovery and i am currently running super scan on it.



DISKPART> clean

DiskPart succeeded in cleaning the disk.

DISKPART> create partition primary

DiskPart succeeded in creating the specified partition.

DISKPART> exit
__________________

Answer:Help! Disk clean and create partition primary recovery

Hope that Jumanji can step in here and help you.

I would NOT try to recover the files as a first choice.

I would think in terms of recovering the partition--rather than the files.

The best single tool is probably Partition Wizard. It would try to recover the partition, and if successful, your files may be intact.

Don't do anything that writes to the disc.

2 more replies
Relevance 99.63%

Hello, I just migrated my X240 OS (Win8.1) from HDD to SSD, and swapped the HDD with SSD. Everything went smooth, so instead of the 500GB HDD I now had a 500GB SSD. However, I thought it might be best to start 'fresh'and do a reset to factory settings. On the SSD (a clone of the HDD) I see all partions, including the Recovery partition. However, if I attempt to reset to factory settings, I get the message that Windows could not find the Recovery environment. I did make a recovery USB flash drive, but it doesn't help at all. Also, booting from the recovery USB drive does not work -the screen remains black when I try to boot from it. So, even though I still have the recovery partition and though I have a recovery USB, I don't seem to be able to do a clean install. Does anybody know what I'm doing wrong or how I can do the reset? If my recovery partition/USB flash drive fail, can I get a Win8.1 DVD/download from Lenovo perhaps? After all, I have a legitimate Win8 version and I think I took all reasonable precautions by creating a recovery USB flash drive... Any help is appreciated. Many thanks! 

Answer:Cannot reset X240 to factory settings with Recovery partition / USB Recovery drive

Following up on my post, I finally managed to do a clean install/reset to factory settings using my "old" HDD drive (the original drive from which I cloned to SSD) in an external casing via USB. So apparently the Recovery partition on the HDD was functional.However, I'm still not able to make a functional Recovery USB flash drive. I already made 1 in the past, and I just re-did this, but when I try to boot from the recovery flash drive, I just get a black screen and nothing happens. I noticed during creation of the Recovery flash drive, that I cannot select the option to copy the contents of the Recovery Partion to the flash drive. That's why the size is so small I guess: only a few hundred MB whereas the flash drive is 32GB in size. I presume this is the reason I cannot use/boot from the Recovery USB flash drive. Does anyone know why I can't create a proper USB Recovery flash drive?  All help is appreciated!  

1 more replies
Relevance 99.22%

Hi there! I Have an K430 desktop Lenovo with 2TB disc. When I bought it there was only one partition C: in entire disc + hidden 20GB recovery partition.I split the 1,95TB partition in two (1,75TB = DATA and the rest= C: SYSTEM)Now I have 7 partitions (PBR_DRV, SYSTEM_DRV, LRS_ESP, WINRE_DRV...) The OKR do not let me to clean ALL partitions to factory settings, but only C: SYSTEM partition. The others (mentioned before) are still there.Can anybody help me how to clean all disc to the factory settings, including all disc? I would like to see only ONE entire disc partition C: + hidden recovery, like when I bought the PC...Now I saw that you had already covered the topic. Can you help me please? It is urgent only for one reason; are several days that I'm looking for the solution, because my PC is in standby for new instalation and I have a lot of work to do with it. I would like to avoid to reinstall again all software that I work with, before I solve the partition's issue.If you can, please contact me direcly (I've posted on Lenovo Facebook page too (martanrene is my FB ID) Thanks in advance!Rene'

Answer:Restore - Recovery partition factory layout on 2TB Lenovo K430 disk issue

HiThanks for your reply! I promiss that the next time I will post on forum my future issues....sorry for to contact you direcly...I ment only one partition in disk management. When I bought the PC, there was only one partition (C: )in Win Explorer and in DIsk management there was the (C: )partition plsu an hidden 20GB recovery partition. The rest was clean.I have partitioned with MiniToolPartitionMagic Free. Infact only after the partitioning, where I've created the D: DATA partition (1,7TB) there appeared 7 the little partitions:PBR_DRVSYSTEM_DRVWINRE_DRV.... ecc. Now that I would to do, is to restore entire PC and disk to factory settings. I mean to "clean" with/without OKR utility all disk to initial partition tab = 2TB (C: ) I will try to explain you what I've did.I tried to make an USB 16GB FLASH disk with windows 8 utility and while I was creating I've turned on the "copy the hidden recovery partition from PC disk" too.When was ready I restarted PC with the USB disk and followed this instrucions:http://support.lenovo.com/us/en/documents/ht076024 Then (yesterday evening) I started to clean all units on my PC (not only C: System) from the USB utility. Infact, it was the first time that entire proccess was extremely slow. AFter two hours was at 12%....Ok, this morning when I started the PC, there was to accept the same "Microsoft Licence, Language, Name, ecc...), but for the first time I  could review the "welcome" page of Windows 8 ... Read more

4 more replies
Relevance 98.81%

My daughter installed some upgrades on her windows 7 laptop, following this it will not reboot into windows. Have tried all the obvious things the only option now seems to be a system recovery but she will lose her applications. Only restore point is from date of service pack 1 and that was unsuccessful.
Dont have system image disc.
I do have a recovery disc from another PC and can boot from this.
The laptop passed start up tests.
Would it be possible to uninstall the recent upgrades to see if that helps?
Does minimised image recovery option allow you to keep applications, would this be better than system recovery?

Answer:Re: Cannot restore computer to factory condition or create recovery disc

First off backup any data that you can't live without off of the computer and save it to a USB Flash Drive and by using an Ubuntu Live CD.
You can try your recovery CD and see if you get the option to Repair My Computer or to get to the Command Prompt. Here type chkdsk C: /R the Check Disk utility will try and fix any file errors.

1 more replies
Relevance 98.81%

I currently want to wipe out my computer and start from scratch as there is a lot of junk on it and too much of it to delete it manually.
I tried using the 'repair computer' option when windows starts by pressing F8 but I get the error message '0xc000000f' and something about how the boot failed because the device is inaccessible. My computer can start up normally, I only get this when I try to use the repair option.
I thought I would fix this by making a repair CD but when
I try I get the error message saying 'system repair disc could not be created, the parameter is incorrect (0x80070057)'
I thought I could get around this by downloading and burning a repair disc manually and it appeared to work until I chose the option to restore my computer to its original state, then it says something along the lines of 'windows could not find system image'.

My laptop is a hp touchsmart tmt-2050ea and runs windows 7 home premium

p.s. Im not sure if it helps but i think the recovery partition of my laptop was deleted , maybe reinstalling it would fix it... but alas I don't know how

Answer:Cannot restore computer to factory condition or create recovery disc

if the recovery partition was deleted and unless you created the proper recovery disks when you first got the computer, then you are basically out of luck. You will need to get with hp and purchase a set.

you can go into disk management and see if the recovery partition is still there. just right click computer, click on manage, then click on disk management.

2 more replies
Relevance 98.4%

I am working on my sisters Toshiba L655d-S5055 notebook. windows 7, 3gb, amd v120 processor, 250gb drive. Started with error msg at boot "encountered a problem communicating with a device at startup......". Couldn't get by this error. took out drive, inserted into usb-enclosure, and tested. numerous sector errors. She has also lost the recovery disks I made for her. I used partition software to scan just the recovery partition, and there are no errors reported there. What I would like to do, is to copy to a flash drive, or make new recovery dvd's from this recovery partition; then I can use the coa from the back of the notebook (if necessary) for full install onto a new hard drive. However, I can't use the toshiba notebook for this; I can only use my desktop pc for the xfer; using the toshiba hard drive as a usb external drive, and the toshiba media creator software will not install onto my desktop pc (doesn't give me a reason). I would prefer to go the dvd-route, but flash drive would be ok, too. Any info is appreciated. thanks.
 

Answer:how to create recovery dvd's from recovery partition mounted as usb-external drive

9 more replies
Relevance 98.4%

Hello, I've used the recovery media creator to create a USB flash drive recovery media.

If i then use that to restore the Windows 7 installation onto a new hard drive (as SSD) will that drive itself have the recovery media partition on it?

So if I then lose the USB stick could I restore again by holding down zero when powering on?

Or does it recover the Windows partition and nothing more?

Thank you

More replies
Relevance 98.4%

I recently bought a Satellite Pro L850-1UJ with Windows 8
http://www.toshiba.co.uk/laptops/satellite-pro/l850/satellite-pro-l850-1uj/

I've created a new partition (so i could use it as data room)
i.e. C: the windows system AND Z: my data

after that, i could NOT use the RECOVERY MEDIA CREATOR to create the recovery dvds
BUT the partition still exists and i can see the inside files from windows

IS IT a way to extract the files from the recovery partition or any other clue how i could fix the partition scheme so the RECOVERY MEDIA CREATOR could recognize it


Many thanks for your time...

Answer:Satellite Pro L850-1UJ: How create recovery DVDs from recovery partition

After changing HDD partitions structure it happens that ?Toshiba recovery media creator? cannot find recovery files. These files are marked with special markers that in your case cannot be found anymore.

I?m afraid now is too late to do or change anything. You are not the first one with this problem. We always write here that first step should be recovery media creation and later you can do whatever you want. You can even delete it.

Now you can just order new recovery disc at https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 97.17%

Hi, I am trying to create a recovery drive on a new ThinkPad Yoga 15, but that is failing because the recovery partition seems to be empty. - Computer Management > Storage > Disk Management shows 3 hidden partitions. All three are 100% free (empty). - Control Panel > Recovery > Create a Recovery Drive throws error "We can't create a recovery drive on this PC. Some required files are missing. [...] use your Windows installation disc or media." - The laptop shipped without any installation disc or media. - Running >reagentc.exe /info throws "Operation failed: 3. An error has occured". - Running >sfc /scannow results in "Windows Resource Protection did not find any integrity violations". Where are the recovery files, and how can I create a recovery drive on this system? Thanks.

Answer:Recovery Partition Empty & Can't Create Recovery Drive

The better part of a month later and still no reply from Lenovo Support? I would appreciate a response. I paid a lot of money for a device that does not work as advertised. Thanks.

2 more replies
Relevance 97.17%

Dear All. My T440s no longer has the recovery partition.I'm with Win 8.1 Pro, but I would like to restore the system. How can I do to restore and create a new Recovery Partition? Thanks,Lucas Mendes  

More replies
Relevance 97.17%

Hello all, I'm new here. I bought a Lenovo G50-70 at the end of 2014. I want to create a recovery media of my RECOVERY PARTITION. Ok I have Lenovo OneKey Recovery App v8 but with that application I can't create a recovery media of my recovery partition, I can ONLY create a recovery of my current partition (in this case: C: ). I don't want that my current partition has 119 GB. My recovery partition has 15GB, my question is: How can I access there to record it in a USB, DVD or my PC? Thanks in advance.

Answer:Lenovo G50-70 create a recovery media (of recovery partition)

macrium reflect





find joy.

7 more replies
Relevance 96.76%

When I try to use the Factory Recovery Disk creation program in the ThinkVantage Tools on my W701 with Win 7 x64, I get this message "Unable to Find Files for Recovery Media" and the program won't go forward.  Any ideas out there? Thanks, Jim













Solved!

Go to Solution.

Answer:Factory Recovery Disk says "Unable to Find Files for Recovery Media"

did you delete the recovery partition on your hdd?

9 more replies
Relevance 96.76%

I was trying to create the factory recovery on my usb drive when my computer went to sleep unexpectdly. Worried this would corrupt the install I canceled the install. Now every time I try to do it again I get the message... "Unable to Find Files for Recovery Media" What can I do?

More replies
Relevance 96.35%

Hi.
I created a Factory Recovery Media on a Flash Drive from Dell  Backup & Recovery Panel.
Do I still need to keep the Factory Recovery Partition (6GB) on my C:\ Drive? 
Or can I delete this partition and still be able to restore my Software back to it's factory image using the bootable Recovery media Flash Drive?

TC.

Answer:Do I need my Recovery Partition having a Factory Recovery Media.

Hi,
Thank You for writing to us!
We would not recommend you to delete the factory image on the system,also please check the factory image that you have backed up.
Thanks
Robin

1 more replies
Relevance 95.94%

I have ORK 6.0 preinstalled and I created a backup as soon as I bought the machine. The backup worked fine but I can not create recovery disks since the combo box where you are supposed to chose the drive where the backup will be copied is empty. Any ideas? Thanks in advance   

Answer:S10 - One Key Recovery - Select Drive combo box is empty when I try to create a recovery disk

To create recovery disks, you need an optical drive capable of writing to either CD or DVD media [depending on which method you are using]. I don't  think the S10 has an optical drive so you are left with two options. 1) Connect an USB CD or DVD writer and create the recovery disks. 2) Use VirtualCD to create a virtual CD/DVD writer to which you can write your recovery disks and then transfer to another computer I would actually recommend that after you have created recovery disks, that you look into creating a recovery USB instead of having to carry an USB optical drive with you all the time. Since the recovery disk is based off of Windows PE 2.0, you can do step 3 in this article to make your USB flash drive bootable. Then copy all the files on the recovery disk to the USB. If you use max compression when creating the backup, you can get away with using a 4GB flash drive.





\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

3 more replies
Relevance 95.53%

I want to konw the way to create the system recovery disk using one key recovery? 

Answer:One Key Recovery 8: How to create a Recovery disk(Ideapad Y580 (Windows 8))

hi patriot925th,

Welcome to the Lenovo Community.

To create a recovery disc using the One Key Recovery 8.0, you need to:

1. Type "Recovery" on the start screen and click One Key Recovery
2. On the One Key Recovery application, select System Backup
3. Follow the screen instructions (you might need a flashdrive or external drive to save the backup)

Image here:
http://www.imagesup.net/?di=1313561145840

You may also like to check:
1. How to create a Windows 8 Recovery Image -
http://tinyurl.com/c2zc8a5
2. How to refresh your PC
http://tinyurl.com/b7s7xv9
Hope this helps.

9 more replies
Relevance 95.53%

Hello, I never created recovery disks when I purchased my T60 over three years ago.  I regret that. Now I am wondering if it is possible to do so.  When I launch Create Recover Media (rrmedia.exe), it crashes immediately:AppName: rrmedia.exeAppVer: 1.0.0.1ModName: unknownModVer: 0.0.0.0Offset: 0018089aEventID: 1000 I cannot request recovery disks from Lenovo, because my system is out of warranty now. So I think it is either it is impossible to use rrmedia.exe at this point (since in the meantime, I've upgraded to XP SP3, etc) or I need to upgrade or reinstall Rescue and Recovery.  However, trying the latter opens up a can of worms: 1) Rescue and Recovery shows version 3.01.0037.  Running system update to patch to 3.01.0042 fails: "A later version of 'Rescue and Recovery - Client Security Solution' is already installed on this machine.  The setup cannot continue." 2) When I try to uninstall RR from Add/Remove programs, it fails: "Another version of this product is already installed.  Installation of this version cannot continue.  To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel" 3) When I try to upgrade to the latest 4.xx, it says I must first uninstall the current version, which from the above, I cannot do. So the machine is confused as to which version it has, and it won't let me upgrade, uninstall, or reinstall. In summary:&... Read more

More replies
Relevance 95.53%

Well I finished my project - the program script allows me to create MBR and GPT hard drive partitions with a recovery image partition. The script also allows me to install 3 different versions of windows. and lastly it allows me to capture a recovery (push button reset) image. which can then be used to create recovery media..


Here is the Menu Snippet:
(A) CREATE A "BIOS_MBR TYPE" PARTITION STRUCTURE
(B) CREATE A "UEFI_GPT TYPE" PARTITION STRUCTURE
(C) CAPTURE AND CREATE A "BIOS_MBR TYPE" RECOVERY
(D) CAPTURE AND CREATE A "UEFI TYPE" RECOVERY
(I) INSTALL MICROSOFT WINDOWS FROM THIS USB DRIVE
(X) QUIT THIS PROGRAM

WinPE 5.1 was the preinstallation environment use for testing

Answer:Create a Recovery Partition and Recovery Image

Good one! I always have to go back and look up the procedure and commands when doing this. Really a help for an old brain.

3 more replies
Relevance 94.3%

Hello folks, I have a problem, I need to create a system back up disk for my computer. I use Vista OS. and is a HP m800n Pavilion Media Center TV Desktop PC

I found out that my DVD was not ID'ing DVD's of any kind. I appear to have resolved that problem because it is now playing movies now OK.

What I need to know is how and where do I go to create a system recovery disk ????

A quick note here; when I put in a Blank DVD+rw, it automatically go's to Windows media and does ID the Disk as a DVD+RW, is that good or what?? I plan to use two DVD+RW which was indicated in computer documents but does no explain where or how to do it!

I sure welcome the help !!!

Answer:Need to Create a System Recovery Disk for my computer help

In the Start Menu it'll be located under the HP headings, or the Recovery headings. Just scroll down the list to see where it is.

2 more replies
Relevance 93.89%

Hello,  I have a T520 from a former employee that I would like to restore to factory settings.  The employee supplied the incorrect password after leaving the company, so the built-in recovery feature is refusing to continue with recovery. Is my only solution to re-install windows from a separate OEM disk, then later try to attempt the recovery from the recovery partition?  Is there a simpler, less frustrating and time consuming method?  I'll be going around today and creating recovery media for all our other PC's to prevent this in the future. Thanks,Kyle

Answer:How to create "Factory Default Recovery Disc" with OneKey Recovery

Howdy all, Quick update:  I reinstalled Win7 with a separate OEM disk, and am working on reinstalling all the T520 specific drivers.  One new issue is that the built-in recovery feature is no longer accessible!  When I press either blue Thinkpad button or F11 at bootup, it briefly enters recovery mode but then very quickly continues to boot windows normally. I was hoping to use the recovery partition, but it appears that I cannot - can this be correct?  I should always be able to access the recovery partition, right? Any help on this will be appreciated! Best Regards,Kyle

1 more replies
Relevance 93.07%

After I did a clean install of Win10 about a year ago, I created a USB Recovery Drive. I also have a Norton Security Recovery Drive and I?ve created USB Bootable PE Rescue Disk by Kyhi. I also use Acronis to create regular full disk images and I have a USB Bootable Acronis Rescue Drive.

With the USB Recovery Drive and the USB Bootable PE Rescue Disk by Kyhi, do I still need to keep the Recovery Partition that Win10 created when I did the original install? Are the files in that partition used by the system to create the USB Recovery Drive?

Also out of curiosity I executed the ?reagentc/info? command and I see that the Windows RE status is disabled. Did creating the USB Recovery Drive do that or is something else going on? If I keep the recovery partition then do I need to re-enable it and if so how do I do that?

Answer:Recovery Drive vs Recovery Partition vs PE Rescue Disk, confused.

Hi, you don't need the manufacturer's recovery partition unless you planned to restore the PC to as bought e.g. to sell it on.
You could create a disk image of it and save it on an external disk, then delete it from your PC.

Windows RE: Suggests you have a corrupt or missing partition - System Reserved. Note that Disk Management does not show this 16Mb partition. You need a 3rd party partition manager to see it.

See this (lots of technical detail):
Just a moment...

And do a couple of checks to see if it really is missing.

Thread where this problem was resolved:
Can't enable Windows Recovery Environment

For interest:
Windows RE statue Disabled - Microsoft Community

9 more replies
Relevance 93.07%

I accidentally formatted the recovery partition and now I can't make a recovery disc. Can someone please help me? I also have an original windows 7 disc and how could i get back the lenovo stuff back on it?
 
 
 
 
 
Edited subject to match post.

Answer:Accidentally formatted the recovery partition and I can't make recovery disk

That sucks, and you have tons of options including heroic tasks such as undelete tools that may or not work reliably.You may also feed your machine type and model number into the support.lenovo.com website and navigate to a list of the latest and even oldest stable drivers and software for your system.Regaining the exact functionality of booting to the recovery partition isn't regained from downloading those drivers.If you're insistent on restoring the same reboot/recovery functionality then you should consider contacting Lenovo support to determine your options, I'm not qualified nor presumptuous enough to mention whether or not a fee is involved for materials.





Signature:Let us know what happened,and share your solutions so others may benefit from our experiences. "It doesn't really matter what kind of computers I own since right now the conversation is about the problems on the computers that YOU OWN!" -Mark Twain

7 more replies
Relevance 93.07%

Will Vista Recovery Disk Work if there is No Recovery Partition?
Thanks all.
 

Answer:Solved: Will Vista Recovery Disk Work w/ No Recovery Partition?

8 more replies
Relevance 93.07%

Talk about confusing. Does anyone know how to get a Toshiba C660 working after the HDD has failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will the recovery disk ( if you purchase one from Toshiba ) rebuild the new HDD along with a new recovery partition and install windows 7 (original OS ) and accept the product key printed on the Windows License attached to the base of the laptop. I have read a number of suggestions but these have been deemed incorrect by others.

Surely Toshiba must have a way of sorting this problem.

Do they read these posts ?

Answer:Satellite L660-12Q - Would recovery disk rebuild the new HDD along with a new recovery partition

Hi buddy?

I don?t think that this is really complicated? I could find all info regarding the recovery procedure in the user manual?

The recovery disk has to be created at the first day of purchase? its recommended to create one in cases something would be wrong with the HDD.

The recovery disk contain an image?. Image is a package containing Win system, drivers, tools and all the stuff preinstalled on the notebook.
You purchased the notebook and the system was already activated so you don?t need the key placed at the bottom of the unit.
Furthermore the usage of recovery disk formats the whole HDD (partitions too) and set the notebook back to the same state like at the first day of purchase.

There is also another option to recover the notebook called HDD recovery. This HDD recovery does not need recovery disk. Usage of HDD recovery would format ONLY the C (system) partition.

2 more replies
Relevance 93.07%

Hello! Thank you for looking at this. I'm going to be as succint as possible, but there are a lot of things to be mentioned:
Main Problem:
Error message on windows startup(The message was not in english, can't paste it). The error message says that it was not possible to load the OS because there's a file missing, or it is corrupted.
Error Code: 0xc0000225
File: \WINDOWS\system32\winload.exe
Possible solutions:
Recover system.
Secondary problem:
My laptop has no dvd drive.
The disk had a recovery partition, but apparently that is not available either, because I can't find a 'recover' option on boot options.
I have the Recovery Disk, another windows laptop with dvd drive, and I have an USB drive which I can use to boot the recovery. I need to know how to create an usb to recover windows, using the recovery disk. What I find online are ways to create that usb resorting to the recovery partition, not the disk.
Besides this, I would like to know if booting the Windows Recovery deletes the files, or if there's some possibility of that to happen. In that case, since I don't have a backup (I thought I had, but apparently it wasn't working properly), I also want to know whether it is possible to access the files first, to create a backup, before messing further with the system.
Context (and further question):
The error happened after I tried to install Linux on a secondary partition.
In Windows, I created the free space by shrinking the (bigger) partition. Formated a bootable usb t... Read more

Answer:Create a windows recovery usb from Recovery Disk

click here make the windows 10 media creation tool and an win 10 iso on USB
boot from the USB and try start up repair first

1 more replies
Relevance 92.25%

hp 241 g1 laptop given by rajasthan govt., india to schooler students !My son  received these laptop with pre installed genuine win 8.1 with ms office 2013 & other educational software.but we received these laptop with already removed recovery partition !!so i can't able to create recovery disk !! for this issue i contact hp support care number. but they say they have not any recovery media !!How to solved this issue ? how to make recovery disk myself if recovery partition removed? my mobile no. is : 9460410231 email : [email protected]

More replies
Relevance 92.25%

I was creating recovery disk from recovery partition on my Lenovo T400 with Windows 7. 6.5 GB of the recovery partition has been occupied.But in the process, I created three DVDs. I might remember wrong, but the first two DVDs were called by the wizard as disk 1, and the third one was called disk 2.The first one has been written 0.22 GB only. Following is the content of the DVD (right click the image and select view the image in a bigger size):
 
Link to picture
The second one has been written 3.97 GB as follows:
 
Link to picture
The third one has been written 2.44 GB as follows:
 
Link to pictureI am allowed only one time to create recovery disk. So I was wondering if I missed something? How is the creation process supposed to be like? Thanks and regards!
 
 
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules
 

Answer:Have I created the recovery disk from recovery partition correctly?

Looks okay to me. In the past, after I created a recovery disk set once I have the new laptop.I would use the Roxio software or any similar software to create ISO image of the 3 discs, and store these in a network drive or 2nd harddisk. Then I would reboot and use thinkvantage to factory restore the laptop (takes about <15 minutes now if window 7), this will restore the capability to create recovery disc again, and then I can burn another set of recovery disks. The reason I have 2 or more sets is because one time I had an issue with my T61 a long time ago and when using the recovery disk discovered that the 2nd disk is bad. From that i learn my lessons and have multiple backup in case the media was scratched, wrap under heat or i accidentally erase/overwrite my DVDRW. One of the disk out of the 3 is normally the bootup disk which you can use a CDRW disc, the other 2 is quick large in file size and DVD discs are needed.

4 more replies
Relevance 90.2%

I have 160GB Intel SSD in my X1. When I try to create recovery discs, I got error. It says"S:\Recovery\WindowsRE\winRE.wim required by this program cannot be found"Does anyone have solution for this problem?I just want to create recovery cds for future replacement hard drive.

Answer:How do I create factory recovery DVD for X1?

Give Lenovo service a call and tell them about the problem, they probably will send a set of recovery media free.

1 more replies
Relevance 89.79%

Hello, I don't believe I have made any changes to my computer since I got it. I have read and reread several times the instructions for using the one touch recovery system to create factory default discs. I have also watched the videos and read all the forum threads. Please tell me what to do next after reading my account of what I have done so far. 1. Tried to create factory default recovery discs using write only discs. Kept getting messages that my discs were not blank.  2.I then switched to best qality rewritable discs. The program looked to be working, and then I got this message: "The program cannot find the service partition. This function is currently unavailable." I tried this twice and got the same message. 3. Next, I tried using the option "Recovery discs with current system". It began to work, and then ejected the disc and gave me this message: "NOTICE An internal program error has occurred. Failed error code 0xEB1B068A"   I do not know what to do now.  I am intelligent but not extremely versed in all the operational systems and options. I DON'T speak or understand technical jargon, but I am capable of following simple instructions. I cannot find a telephone number anywhere to talk to any tech person about what I should do next. Is there no Lenovo help for purchasers when they are trying to follow the guidelines provided in the manuals? I see nothing about what to do if the system for creating these critical f... Read more

Answer:Create factory default system recovery discs with one touch system. New computer, not working.

Hi, and you made NO changes to your partitions at all? You can try the following. Try and burn the discs with PH?L?PS DVD-R,OR if that doesn't help,use the DVD drive to burn something else and see if that completes successfully. ?f it does,then download the One Key Recovery from your model's site un-install the current one, clean your disk,reboot and then install the new download. ?f the dvd  test does NOT complete successfully,then you found your problem. ?f anything is not clear to you,please feel free to ask. Do let us know how you go. 

2 more replies
Relevance 88.97%

I have an XPS 8700 running Win 7 Pro & am unable to create a factory recovery media on a USB external drive.  It is difficult to get Dell Backup & Recovery to recognize the drive.  But, even when it does recognize the drive, it starts running initialize & then gives the error that a different media must be used.  The drive in question is a 2TB Western Digital My Passport.  I have read several threads with the same sort of issue but have not found a resolution. I am running the latest version of Backup & Recovery. 

More replies
Relevance 88.97%

I would like to restore my laptop to factory settings after butchering the factory install.  I see the "LENOVO" volume as Drive D, and it appears to have the restore tools, but I cannot figure out how to get to One Key Recovery.  I've tried rebooting while pressing F2 or F11 repeatedly; F2 gets me to BIOS, F11 doesn't seem to do anything. Thanks in advance.













Solved!

Go to Solution.

Answer:How to Create Factory Disc with One Key Recovery 7.0

Hi,
 
What laptop are we talking about here?  I've looked around in your other posts and see a variety of machines.
 
Do you have a ":novo" button?  Try pressing that when power is OFF.
 
And are you trying to create factory disks (as in a set of recovery media) or restore your HDD to factory state?  Or both?
 
Z.

2 more replies
Relevance 88.56%

Have a computer that didn't come with any disks, just a hidden partition with the os and programs. Is there a way to backup to disk the recovery programs in the hidden partition?
 

Answer:Computer didn't come with any disks. Just recovery disk located on hidden partition.

Re: Computer didn't come with any disks. Just recovery disk located on hidden partiti

Some manufacturers do supply a way to burn your own recovery CD/DVD set (even some of those Dell PC's that also have a hidden recovery partition).

I'd suggest you checkout the support section/forum of the makers website to find out how to access yours (if there is a way). Be warned - you will only have 1 chance to make the recovery CD/DVD set, have the correct CDs and DVDs ready before you start the creation process.
 

2 more replies
Relevance 88.15%

I have an X301 with Windows XP Pro (purchased 10/2008) as it's base from factory. I would like to create the factory recovery disks but I would like to create it on a USB flash drive as my CD/DVD drive is not working. I do have the Factory recovery CD/DVDs for Windows Vista that came with the unit but I do not want to install Windows Vista. I still want Windows XP Pro. I have gone through the Create Recovery Media, the program never gives me the option to save it to a USB flash. I have searched the forums and have seen the option for the X301 with Windows 7 installed. Is this not possible for Windows XP Pro? All of the Lenovo System Updates are updated. Anyone have any ideas? Thanks Mark

More replies
Relevance 88.15%

Just purchased a 120G SSD to replace the 1T harddrive of H430. Tried to use Lenove rescue system 3.0 to create a set of factory recovery disc to reinstall the OS to new SSD. However, the only option available to me is 'Create recovery disc with CURRENT system' and there's NO option of 'Created factory recovery disc' at all. After I created recovery discs with current system and reboot the system with ONLY new blank SSD. The recovery process can not proceed stating the there's no enough space of the new SSD to complete the installation. How can I install the new SSD as OS drive? Is this a bug in the software that I can not create facotry recovery discs as many other brands can do.

Answer:How to create FACTORY recovery disc for H430

I have the same problem. The work around is to create a partition on the existing 1TB hard drive and make the new partiiton very big. Once the C drive have less than 100GB space (mine is 30GB), you can create the system recovery disc agian. And the backup will allow you to restore the system to the new hard drive. Hope this helps.

1 more replies
Relevance 86.92%

Hi all, Happy with new W530 but unable to create factory recovery discs.. Searched and found possible solutions in knowledge base and forum but none worked Until know Files for recovery media not found... (although i have two lenovo recovery partitions on SDD) Called support and they offered website to order recovery disc's (not for free???) Ok... then..filling in the necessay forms and providing all data ended up in not able to choose for Dutch language recovey disc's . How to proceed?

Answer:W530 unable to create factory recovery disc's

In my opinion, there should be a secure way for the owner of the machine to download the images in .ISO format so you can burn them.  Of course information would need to be verified to prove you are entitled to do so, but this doesn't need to be overly complicated.  Don't forget you can always get a Windows 7 disk and use the serial number under your battery to install Windows from scratch. The only time I use the factory image disk set is if I decide to sell a machine.  I'll image it back to the factory state.  It's a pretty rare event.

9 more replies
Relevance 86.92%

Brand New W510 with 128GB SSD - trying to create factory recovery disks and crashes every time, just freezes after the dialogue box that asks you to select the recovery medium you want to create.

Answer:Trying to create factory recovery disks and laptop locks up

Hi and welcome to the forum!

Give support a call, in situation like this they usually ship free recovery discs. 

Keep us updated.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Espaņol Visit my YouTube Channel

1 more replies
Relevance 86.92%

Hi I just bought a ideacentre H320. I want to prepare recovery discs, but when I do so, I am only given the option to backup the "current system". I did not see option in such as "Factory Default Recovery Disc" as I see in OneKey Recovery 7.0 (Mine only come with something similar called "Lenovo Rescue System 3.0". But I don't want to back up the current system, I want to get the recovery disc to have factory image, so when I restore, it will be like I just open the the new pc from the box. How can I do that? (I know you can achieve the same thing through the "Service partition" but what if the harddisk is corrupted and you lost the partition?) Is there any way to backup the service partition, so when I do something like upgrade Hard drive, I will not loose the ability to return my pc to factory default? Thanks.

Answer:How to create recovery disc that have factory default in H320?

Is this board active or not? I post the question one day ago, but no one reply it. And it is still on the 2nd line. Are any admin here or support to answer our questions? Thanks.

6 more replies
Relevance 86.92%

Hello There, I am having trouble creating a Factory Default Recovery Disc for (Lenovo IdeaPad Y580 )after my first attempt. I started the first recovery at CSUS, however, since the recovery system was not able to complete before my 11 o'clock class. I decided to set the computer onto Lock mode in my back pakc while I attended class and when I returned to check on the laptop it said that creating the recovery disc was canceled due to inturruption(setting the computer to Lock mode I suspected). As I now attempt to start over and create another one, it is telling me that "The program cannot find the service partition. This function is currently unavailable." So, I am now left with 2 of the 4 finished recovery disc and unable to create a Factory Default Recovery Disc.

Answer:Unable to create Factory Default Recovery Disc

Firstly check if one key rescue is working(swirching on laptop with the small button near the power key). Also try make recovery disks of curren system. Please notify the results.





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

7 more replies
Relevance 86.92%

Hi, I just received a brand new U410 with Windows 8, and having used a Lenovo Laptop before I thought I'd create a set of Factory Defaults Recovery disks for it, however, when I eventually figured out how to get into OneKey Recovery I found that this feature no longer exists! Is there really no way to create a Factory Defaults Recovery disk set on a U410 running Windows 8? If so, what other options do I have?





Scott

Answer:How to create Factory Defaults Recovery disks on U410?

I dont think you can make recovery dvd`s on Win8 , the manual says recovery to external storage device, page 34(38) http://download.lenovo.com/consumer/mobiles_pub/ideapad_u310u410_ug_v3.0_aug_2012_english.pdf John.





Win7 Lenovo Ideapad Z580 i5-3210m HD4000 Win7 x64 8gb 1600MHz Samsung 830 256GB SSD

5 more replies
Relevance 86.1%

I just purchased a new Dell Insprion 3650 I7 16G 2TB Win 10 Home. It arrived yesterday.
The very first thing I did, without even download Google Chrome, was try to create a Factory restore image of the system, for safety and for preparation of migration to SSD disk.
I have downloaded the Dell Backup and Recovery Software and try to do that. I tried a few times, used a brand new and tested 32G USB stick to create a backup image. But when I try to boot it up for re installation test, it keeps saying "IDS_ENVIRONMENT-INCOMPLETE", "The instruction at 0x00007ff77acdf43b referenced memory at 0x00000000025f6ec0. The memory could not be read"
Anyone can help me how I can create an factory image for backup and SSD migration?
Thanks
  

More replies
Relevance 86.1%

Hi,I am using T41 2373 , 1 year back I reformatted C-drive and installed the windows Xp from CD  from scratch, Now the Access IBM button does not work. I think i merged the factory partition as well . Is there still a possiblity of recovering the factory partition , where we dont need CD for fresh installation and for drivers. thanksHaydder





Either Most interesting or most hatred topic improves discussion power.

Answer:T41 Factory Partition and other Access IBM recovery

If you have a set of recovery discs, I believe it will setup your OS and recovery partition as well, but the drivers usually need to be updated anyway, especially on a unit that is several years old.  I think there is a way to keep the recovery upto date by imaging your drive, but someone else will need to advise you on that. If you want to check if your partition still exists, go to administrative tools>disc management and you should see the partition, which will be hidden from the operating system in other areas. If you have only one partition, then its been removed.





ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 8gb ram.

9 more replies
Relevance 86.1%

First of all, happy new year everybody!

Here's my problem, I definitely need help: I want to restore my Alienware R-2 to its factory setting. Here's the problem I have:

1. Alienrespawn can't find anymore my factory setting since I already have formated with the window 7 disc.
2. When I push F8 on startup, the option RESET TO FACTORY STATE is not available in repair option.
3. The Factory image is STILL on my hard drive in a separated partition. I can even explore it.

My question: How can I have access to this image and recover my computer with it. So far, alienrespawn can't find it automaticaly. On startup, I do not have the option anymore. Please help and thanks
 

Answer:Factory recovery partition problem

6 more replies
Relevance 86.1%

I want to do a full factory recovery on my SL500.  After pressing the F11 and going through all the steps, I get this message: Cannot fin the find the file C:\Preboot\Utils\Convert.cmd.  I found out the file is on the S partition of the hard drive but it doesn't give me an option the change the directory.  I have created a recovery cd already but that is after I installed some programs on the laptop already.  I really want a fresh recovery. The weird thing is after I used my recovery cd, it shows that there is 80 gig worth of data on the hard drive after I deleted everything with only a few programs installed like office...etc. Please tell me what are my options.  Thanks.

Answer:Trying to do full factory recovery from partition

Hi and welcome to the forum!

Did you make rescue media or recovery discs? let us know...

You can create recovery discs any time even after installing programs on the HDD, following link shows the correct procedure for recovering your HDD to factory settings:- http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70803

How big is your HDD? and what is 7 character product number of your SL500? It looks like 2668-KHU and can be found on the back sticker.

Keep us posted.

 





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Espaņol Visit my YouTube Channel

3 more replies
Relevance 86.1%

Hi everyone, I know this must sound like a real stupid title, but please bear with me for a moment: Having wiped my R50p clean with the "Access IBM" button, I noticed that I only had a C drive with 20 GB of which much was in use. In Windows XP Disk Manager I saw that there was a whopping 55 GB on a hidden partition that I only had the option of to "remove", not to activate or anything else. Realising that this was the hidden partition with the IBM restore files, I was hesitant to take any action. After doing some research on several forums I found that the recovery part should only take up 20 GB, which corresponded somewhat to the fact that Disk Manager showed 42 GB of 55 GB to be "free" (if only I could use the free space!). In order to access those magnificent 42 free GBs on the 55 GB hidden partition, I first created a ThinkVantage recovery disc (strangely it was only one CD-R) and disabled IBM Predesktop Area in the BIOS. As a result, I proceeded with deleting the 55 GB partition and it became unallocated space, therefore allowing me to make it a new partition and assign a drive letter (in this case D), doing a "quick format (NTFS)" in order to be able to use the space available, and finally giving me the full 55 GB. Since I had preferred to leave the recovery files on the hidden partition, but had no idea how to access the useful other 42 GBs, I followed the abovementioned procedure. Now my question is whether it's possible to recreate another hidden parti... Read more

Answer:?? Restore Recovery Partition with Recovery Disc after deleting Recovery Partition

pvanedan, welcome to the forum, after reading your post several times I think I understand your situation as it is now. The answer is as follows; which you may not like sorry  You have successfully deleted the recovery partition in order to gain more space, that's the good news  The cd you have created is only a boot cd and not a recovery cd, this would be used to boot your ThinkPad and access a recovery backup which is stored on another hard drive, cd/dvds or over network. It alone is not able to recreate the recovery partition which you no longer have, that's the bad news  I would suggest backing up your files regularly and using an appropriate imaging software to backup your installation. Edit: What I don't understand is; why 55GB? The partition should have been around 4GB, maybe it was full of backups??Message Edited by andyP on 07-03-2008 07:30 PM

4 more replies
Relevance 86.1%

hi, Folks

i run windows 7 and wanna make a recovery partition hitting the F key on startup like toshiba's one. The toshiba recovery utility is no longer available. Who can help me to do it?

Thanks in advance

Answer:How to create a recovery partition?

Hello

1.) On Toshiba notebooks there is no recovery partition. They only have an image of factory settings stored on second partition in HDDrecovery folder. This recovery procedure can be started in advanced boot menu of Windows (F8) and if you select ?Repair my Computer?.

2.) It?s not possible to create such a partition and then you have to press only one single key to start this. I think it?s pretty complicated to create such a recovery partition.

3.) You can create your own image using a backup program like Acronis TrueImage. Save this backup on the second partition or external HDD. You can restore this image using the Acronis boot disk. It?s very easy and I do this on my notebook too.

7 more replies
Relevance 86.1%

make recovery patition

Answer:how to create a recovery partition

type backup in the run box, open backup and restore center, and create an image, preferably on an external drive.i hate computers!but cant help myself....

2 more replies
Relevance 86.1%

Thank you for reading! Skip to the bold part below if this is TLDR. I've tried searching around for answers, but I'm afraid that I'm just not familiar enough with what I'm hoping to solve to even know if I'm searching in the right place. So again, thanks for your help in advance!

I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.

Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.

Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
... Read more

Answer:How do I create a recovery partition on a 2nd HDD

You can always create a System Image Backup on a second internal drive, as long as it is not part of the backup. You could also copy the current WindowsImageBackup folder to the internal drive for re-imaging the SSD.

The term "Image" may apply to many different type of files. For instance, a Windows 8 OEM system image may be a .wim file used to reset the system to factory conditions. The type of file would certainly determine what utility was necessary to recover that image.

A recovery drive will normally have the Factory image of Windows 8, unless you have replaced the install.wim with a new one. But all this does get confusing if the exact type of image being referred to is not known.

Be aware, when you create a Recovery Drive, the entire drive can be used for nothing else. That is why Flash drives are normally used.

9 more replies
Relevance 86.1%

By mistake my little brother have formated the recovery partition.I am not able to refresh the PC through update&recovery option in PC settings...I have HP pavilion 15 notebook.windows 8.1 single language. Please guide me create the partition again.......











Solved!
View Solution.

Answer:How to create recovery partition??????

Hello, Thank you for posting in the HP Support forum. Welcome! I am afraid you cannot create recovery partitions if they are deleted. End users cannot do it. If the computer originally came with Windows preinstalled by HP (e.g. OEM Windows), then you can purchase recovery media from HP. They are usually cheap. You can use it to restore your computer to factory default condition. Here is how to do it:>> http://support.hp.com/us-en/document/bph07143>> http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html And once you receive the recovery media [DVDs or USB pen drive], here is how to use it to restore back to factory/Windows default condition:>> http://support.hp.com/us-en/document/c03489643>> https://www.youtube.com/watch?v=PC3sUc3lr3E  If the computer originally did not come with Windows preinstalled, but you installed it on your own after that, then you need to use Windows installation media to reinstall Windows. You can get Windows installation ISO images from Microsoft web site and then burn it on a DVD >> https://www.microsoft.com/en-us/software-download/windows8>> http://www.howtogeek.com/80094/how-to-burn-an-iso-image-in-windows-7/  Please, let me know if this helps and works for you. Don't hesitate to post back for follow-up questions.

8 more replies
Relevance 86.1%

As I posted under different thread, my Windows 8 computer crashed a week ago.
A Dell technician replaced a new motherboard. Then, Windows 8 was restored using a provided Windows 8 recovery media DVD. Now, windows 8 runs super.

What I now found was that the original recovery partitions were disappeared. in the main hard drive.
I could not create a recovery drive (in flash drive) without recovery partitions in hard drive.
Is there a way to re-create the original recovery partitions ? If so, how?

Answer:How to create recovery partition

Buy the factory recovery disks.

9 more replies
Relevance 86.1%

I am attempting to create a recovery partition. The instructions I have received to create the partition state to type fdisk from command prompt then choose option 1. However, when I type fdisk I receive the message it is not a recognized command. Any ideas? I got this from this site http://www.ehow.com/how_4841312_recovery-partition.htmlThis is another computer i have, here is it's spec's HP 864n Windows Xp Pro Sp3 Pentium 4 2.66ghz 1024 RAM

Answer:How to create a recovery partition

Why not, after installing, updating, etc. to where you want to create a recovery partition, why not just clone the HD? That way, if the original HD goes, you just pop in the 2nd one and you're back up and running. Just a thought.

10 more replies
Relevance 86.1%

hello

How could i create a recovery partition, so that i could reinstall windows xp?
And if anyone can give me extra info that would be real helpful.
thx in advance.
 

Answer:how to create a recovery partition?

It's a bad idea to make one. You have limited access to the partition, and it is useless if the drive fails. Just use your original CD or make an image of the drive on an external.
 

1 more replies
Relevance 86.1%

I have a Flex 14 Ideapad having 25 GB of solid state disc as a different partition. Now I am thinking of creating a system recovery disc in this drive. However I do not see any option of choosing this drive in the dialogue for creating the receovery disc.Could you please guide me as to how to create the recovery disc / partition for Flex 14 laptop on another drive on the computer itself.Thank you in advance

Answer:Create a Recovery Partition

You have a number of misunderstandings going on here. Firstly, all Win8.1 installations have a hidden recovery partition on the boot drive. You need a separate recovery disk/usb stick in case you get to the point where you cannot boot from the main drive. Best approach is to make a recovery disk/stick and choose to copy the recovery partition too, but do not delete it from your PC when it offers.The recovery drive will be bootable (that's the point) so if you managed to get it on an internal partition you would have to make a dual boot configuration. This would be an odd way of doing things and against design. I recommend against such a strange approach.

5 more replies
Relevance 86.1%

Can anyone advise me how to create a recovery partition like those new HP computer? Thanks.

Answer:Create Recovery Partition

I found an article from PC MagazineMake a Recovery PartitionHope this is of some help

1 more replies
Relevance 86.1%

please how can i create recovery partition again ??  

More replies
Relevance 86.1%

Hello All,
I have seen this thread: request: HP Recovery partition/dvd of Windows 7. I want to make a recovery partition on a clean install of windows 7. This is what I did:
1. Download HP Recovery Manager for Windows Vista
2. Install it.
3. Go to C:\Windows\SMINST\RAMDSK\Windows\SYSTEM32
4. Run Shrink.exe

Before when I ran it it said it couldn't create a recovery partition. To run it asks me to click next when it says "This installer will create a recovery partition and an initial restore point" and I did. But now when I run it as administrator it says its verifying the file system and it says it is preparing the harddrive for recovery partition creation and gives me an error : "Resizing of the windows partition failed or the disk is not recognized!The recovery partition cannot be created.you may try to delete files i the Windows partition, defragment the drive and/opr use a 3rd party tool to reduce the windows partition in size.". I tried everything.

On the screen it gives me the error it said it will restart the PC in a few seconds and it counts down and it shows click finish to restart. When I wait or click finish it just closes and does not restart my computer.

I reinstalled it lots of times.

In Shrink.exe.log it says this:

Code:
__________________________________________________________________________________________

Shrink.EXE - 4, 0, 2, 59 - Compiled on Feb 7 2007 14:08:38 - Executed on May 16 2012 19:26:18

UP is C:\... Read more

Answer:Create HP Recovery Partition

Why do you want a Recovery partition on the same HD, which can fail and lose the ability to recover.

A much better plan is to save a Win7 backup image externally so you can reimage with the Win7 boot CD/DVD in 20 minutes to the same or a replacement HD.

I would also consider with HP getting a far superior Clean Reinstall - Factory OEM Windows 7

1 more replies
Relevance 86.1%

my sony vaio laptop model is VPCEH26EN.I recently installed windows 8 pro 64 Bit.I formatted whole hard disk and installed windows 8.I had a oem recovery partition when i bought this laptop with windows 7 preinstalled.By this hard disk partition ,i used to recover the whole windows to its factory condition by using F10 key.The recovery hard-disk partition was of only 11Gb.it contains the whole windows with some software already installed .But now i have no recovery partition now.So please tell how to create recovery partition with in 12GB for future purpose.The windows default system image creation usually taking 40 gb space.So its of no use.Please tell how to create a recovery partition which can be used to recover windows to its factory condition using F10 key in case of any error in future?????????????????

Answer:create recovery partition

You would like to remake the Sony Vaio VPCEH26EN Windows 7 Recovery Partition with Windows 8?

You can remake the Sony Vaio VPCEH26EN Windows 7 Recovery Partition with the Recovery DVD's.

For Windows 7.

How to make Sony Recovery Disks:
View Document
How to use Sony Recovery:
View Document

How to use Sony Hardware Diagostics:
View Document

How to order Sony Recovery disks:

1.Go to http://servicesales.sel.sony.com.
2.Enter your computer's model number (for example, PCV-XXXX), and click List Parts and accessories.
3.Follow the online instructions to order the Recovery Media Kit.
If you are not able to access the Sony Direct Accessories and Parts Center Web site, contact a customer service representative at 1-800-488-7669.

4 more replies
Relevance 86.1%

I want to create a recovery partition on my windows xp desktop. Pretty much i want to be pompted when the pc boots to hit f10 and have a count down of 4 seconds . I know this would be done through boot.ini however i have no idea how to do so. Also id make a seperate partition on my hd of ten gigs just for the backup image. Im guessing id use ghost to make the backup. But if someone could help me.... I'll appreciate it. Thanks

Please mail me on [email protected]
Scorpionking

Answer:How to create recovery partition?

There are a couple of items you would have to do. First create a new partition, format it with FAT32 and make it bootable using DOS or The version that comes with Ghost. Create your image using Ghost or Acronis and save it there. You will have to install the imaging program on the partition as well put it in a folder called Ghost. Then you will need to create an AUTOEXEC.BAT file to load Ghost on start up saved in the same folder. I would make the parition bigger this way you can keep a few different images stored if you want. Finally you will need to alter you Boot.ini file. Create a copy and save it somewhere easy to remember first in case you make a mistake and need to restore the old one.

The boot.ini should look like this:

[boot loader]
timeout=5
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition(2)\Ghost="Recovery Partition"

You can change how long the wait in seconds is by altering the timeout value.

1 more replies
Relevance 86.1%

Hi all,
I'v trying to create a recovery partition on my Windows 8.1 PC.
I followed the guide here: Restore Deleted Recovery Partition2
I've put install.wim onto my recovery drive (R:\WIN8\install.wim)
When using command prompt to point windows to the recovery drive using:
REAGENTC /SetOSImage /Path R:\Win8\install.wim /Index 1
I receive the message:
REAGENTC.EXE Operation Failed: 3
I've looked around for a solution and i can't find anything applicable.
Can anyone help?
Many thanks!
1]: [click here

Answer:Trying to create new recovery partition

I've put install.wim onto my recovery drive (R:\WIN8\install.wim)

you don't make a recovery drive - install.wim does that for you
Create a folder on our C drive - Win81-Recovery
copy install.wm into that folder
right-click the Windows Start screen button and select Command Prompt (Admin)
type in
REAGENTC /SetOSImage /Path C:\Win81-Recovery\INSTALL.WIM /Index 1
press enter
now type REAGENTC /Info press enter

you should get operation successful
that's it

10 more replies
Relevance 86.1%

i have a year old hp pavilion a6425n and it shipped with a 250 gb hdd witch i later upgraded to a 500 gb hdd and i lost my recovery option.. can i make a new recovery partition using my win7 disk so if i press F11 during boot it takes me to setup?

Answer:how do i create a 'recovery' partition?

Hello cammy,

Here is a tutorial that may apply to you from this very website, try it out: Recovery Partition - Create

Credits:
"Recovery Partition - Create" tutorial creator - severedsolo

8 more replies
Relevance 86.1%

I have a computer with the F10 option when I first turn on the computer. The hard drive failed so I have replaced it and installed windows 7. I am wondering if I can create a recovery partition when I turn on the computer and use the F10 option to restore back to when I first installed windows 7?

Answer:Create F10 Recovery Partition

I don't think you can create a partition that will do that by pressing f10, but you can create a system image of your system that is activated and will restore your PC to exactly the way it is when you create the image. You can burn it to DVD, a separate partition or a USB stick. This would be my suggestion to you. Get your computer exactly the way you want it with all your basic and primary apps installed and everything activated. Then make a system recovery image and a recovery disk. To do this go to Control Panel>System and Recovery>Backup and Restore and look on the left hand side of the Windows and you will see both options. Click create a system image and tell Windows where to save your image and it will make an exact copy of your partition. Then it will ask you to make a recovery disk. Follow the instructions on doing that and you will have a backup of your system at it's bare minimum.

9 more replies
Relevance 85.28%

My OneKey recovery software is v3.0, but I have read elsewhere that there is a version 7.0, and the Lenovo support video refers to this version too and shows options that are not present in my K330 OneKey program. I tried to download new version, but there is no OneKey update for K330. Could someone please explain please? Regards,Martin 

Answer:Why OneKey recovery for K330 does not include "Create Factory defaults disks"?

Same question.. Can someone from Lenovo respond????????

1 more replies
Relevance 85.28%

had a minor problem with file history before but knew how to fix it. but when I tried this time nothing happened. then I got a pop up that filled the screen with the message above. and my pc is acting funny, even my screen is acting up. now here is the screen shot. does this mean I will need to reset the pc from how it come in the box? I've got the cd that came with it, should work if no other way to fix this. it looks bad, but I hope it's not.

Answer:factory recovery partition corrupt or missing.

I had the same problem and gave up on Dell Backup & Recovery a while ago since it seems an unreliable program. I now use Macrium Reflect Free for backups. I found reinstalling Dell Backup created additional disk partitions which were a pain to sort out. See Dell Backup & Recovery Keeps Creating Partitions

8 more replies
Relevance 85.28%

Hello everyone some time ago Installed Windows 7 on one of my Windows 8 computers. But during the install i had to delete all partitions and that was the recovery partition that had he recovery software on it. Well now I want to go back to Windows 8 and I don't really want to send my PC to Samsung for re imaging. But I have the image i made with the software before I installed Windows 8. All I need is to get the recover partition back with the software on it. I have 2 other Samsung computers that have the same software on it but I need to find a way to make a image of the recover partition so i can use my backup image for the computer. So someone please help me.

Answer:How to make a image of a factory recovery partition

Does the image you made contain the recovery partition and the boot partition? If so just restore them.

Also, you said "But I have the image i made with the software before I installed Windows 8." Was that a typo and you really meant Windows 7?

If so then even if you don't have the recovery partition image you can still restore the Win 8 boot partition and it should boot okay.

Edit: What software did you use to make the backup image? You should be able to use it to make a image of the recovery partition on one of the other computers then restore it to this one, then do a recovery to factory state.

2 more replies
Relevance 85.28%

Hello everyone.
I have a fairly new Dell laptop that I installed a SSD in after cloning the original HDD.
Somehow the factory recovery partition was not copied to the SSD.
I have tried twice to upgrade to W-10 and each time it has failed with error message 0XC1900200.
Research indicate the error message relates to the missing partition. So now, my question is how to upgrade without the recovery partition?

Thank you.

Answer:How to upgrade W-7 laptop to W-10 without factory recovery partition?

Have you used the installation media to delete all partitions on your new SSD (by using the custom install option). The drive should show as all unallocated space before you begin to install.

I had various problems with my Dell way back yonder when testing and trying W10 and found doing this resolved all issues.

13 more replies
Relevance 85.28%

Hi Guys can I ask for a little help please
My Dell Vostro laptop was running Windows 7 (64 bit) professional but a few months ago I made a backup of the windows partition with True Image Plus 2013 as a back-up, I then upgraded to windows 8 all was working ok for a while but I decided Windows 8 was not for me and decided to use the true image backup I had made of windows 7.
I booted my computer with the true image boot cd and selected the relevant backup image file, all was ok until One second from completion and then true image said the restore had failed.
I then tried to boot my computer but the MBR was missing I then tried to use a Windows 7 system dvd to repair the MBR but it would not work.
I then found out that when the restore failed it had destroyed my windows partition and my factory recovery partition, and a partition I had my data stored on, so now I am unable to restore my computer with the factory restore option.
Fortunately I had made some rescue dvd and I have my computer working again but I would like the recovery partition back working if I can
I you look at the disk management screen shot I have attached you can see that I have a partition with a size 750.0 MB and 750MB free.
But now I am using Macrium to make my backups and when I run a back-up it reports that a partition is called Recovery and it is 750.0 MB with 212.0MB used and 537.0 MD free please see second screenshot
Can anyone tell me what?s going on and can I get the recovery partition to work again... Read more

Answer:Lost Dell factory recovery partition

The 750mb partition contains the files needed to boot windows. It is quite large because there may some oem tools on there as well.

You don't have an actual recovery partition containing the files needed to reinstall.

You can make one easily enough. It doesn't need to be a separate partition , you could use your data partition for that and still keep all your stuff on there.

I would use the latest installation media for that.

You can get it from here: Windows 7 Direct Download Links - HeiDoc.net

Or you could use what is on your recovery discs if you really want.

9 more replies
Relevance 85.28%

HelloI did a clean install Win10 using Media Cration Tool. I used the option with .iso on DVD. Install was successful. But if I try use recovery partition Alt+F10 to back factory Windows 10. There is no option "Reset PC". Ther is only "advanced option" and thats all. I see that "recover partition" with other is stiil on HDD. I didn't do anything with partition on HDD. Except format old partition "C" to install Win10.How restore recover factory  partition? 

More replies
Relevance 85.28%

As with most new home computers these days, the manufacturer will include a bootable recovery partition on the hard drive instead of sending you a recovery CD.
I?m currently building a new system with windows 7, and after installing some of the most common applications I want to create a bootable recovery partition on the hard drive, as well as a bootable image on a CD.
The question is I?m not really sure how to do this?
I know of programs such as Norton ghost and Acronis, but I was looking for an easier solution, perhaps a free program?
Any help would be greatly appreciated.
Thanks,
Nick

Answer:How do I create a bootable recovery partition?

Hi -

The recovery partitions are found on pre-manufactured OEM systems. You can create a system inage on a partition, external drive, DVD, etc...

See "system image" - from Microsoft, Windows 7 Support -

http://windows.microsoft.com/en-us/w...a-system-image

http://windows.microsoft.com/en-us/w...ings-and-files

Regards. . .

jcgriff2

.

1 more replies
Relevance 85.28%

OK what I need to do is complicated. I have been searching for hours and cannot come up with a solution.
I have a computer with Windows 8 Pre-installed. It has a recover partition. I have disabled UEFI in the BIOS until I can finish installing Windows 7. I do not have any blank DVDs or access to a USB drive. What I want to do is delete the files in the Windows 8 recovery partition and put Windows 7 installer there. Then boot from that and replace Windows 8 with Windows 7. I have the drivers already downloaded to go onto the recovery partition. I have been unable to find any resources online to do this. I already Have a Windows 7 ISO ready to go.

Answer:How do I create Windows 7 Recovery Partition

How do I get over 100 views and no responses?

9 more replies
Relevance 85.28%

Hello,
Although this is my first post here, I am no stranger to this forum. So I have a blank hard drive which is for a notebook laptop with no DVD drive. I am planning to install windows 7 but I also do not have a 4GB () flash disk, at least not at the present.
So I though of creating a recovery partition. I am using windows 7 on my laptop and I have a SATA to USB cord. I have been creating partitions for some time now so I though it will be just the same process except that it is on another HD. Here is what I usually type on the console window.


Code:
diskpart
list disk
select disk X
list partition
select partition X
active
exit
X:\boot\bootsect.exe /nt60 X:
But when I was done with the process, transferred the HD to the notebook it did not boot into the set up process.
Although I don't know the problem, I suspect that the problem might be this last line :


Code:
X:\boot\bootsect.exe /nt60 X:
Please help if you can.

Thanks.

Answer:How to create a recovery partition for a blank HD

I think you are better off to make a USB recovery stick. Those sticks cost pennies.

Newegg.com - $0 - $10, usb stick

9 more replies
Relevance 85.28%

My laptop came with windows 8.1 innitialy. I had upgraded my os to windows 10. Some days back I had to do " restore factory settings " on my pc due to some problems and my pc started with windows 8.1 again.  So, How should I creat recovery partition that would recover my pc back to windows 10 with out going back to windows 8.1. Plzz Help me ASAP.

More replies
Relevance 85.28%

I'm using Windows Vista and I'm trying to achieve this...

1) Copy my C: Drive partition to a DVD
2) Have that DVD be bootable and be able to recover the entire partition back into the partition.

I've got my Hard Drive partitioned into 4 parts
C: - OS
D: - Documents, Program Files, AppData (and other windows folders)
the other two are not relevant.

So basically if anything goes wrong with my OS I want to be able to throw the DVD in and boot to it, have it restore the C: partition.

So what software would I use to do this?
 

Answer:Create a bootable Partition recovery DVD

Acronis True Image will let you "image" your entire drive or partition to CD/DVD media and restore it at a later time. The backup set itself will not be bootable, but True Image will create a bootable CD version of itself that you can use to run True Image natively (meaning you boot from that CD, load the application, remove that CD and then put in the backup CDs/DVDs and do the restoration, or use True Image to create new backup sets).

There's nothing on the market today that will automagically create a bootable backup recovery set; the only one product that ever did that automagically was Powerquest Drive Image. It would put the actual application on the first CD (it didn't burn DVDs when it came out and disappeared before DVD burners/media even became popular) and you could use that backup set to restore.

The only difference with True Image is you need the TI recovery CD + your backup set, hardly a big problem. You can burn off multiple copies of the recovery CD as required, one for each set if necessary.

Good luck...

ps
It's possible to create a recovery set using Norton Ghost and then you can create a new CD and put the ghost.exe executable on the CD, but you'd still be required to do other steps to make that CD bootable in the first place so you could then access the ghost.exe file to run it. A bit more hassle than most people care to bother with, I believe. But it's possible... and you can use other imaging tools to do similar tas... Read more

6 more replies
Relevance 85.28%

I would like to create a custom recovery partition for windows 8.1 that I can use to refresh the pc. I would like to include the drivers that are required. I am unable to locate a tutorial that can help me do this. Anyone know how I can do this?

Answer:Create custom recovery partition

Maybe this will help:
Refresh Windows 8 - Create and Use Custom Recovery Image

1 more replies
Relevance 85.28%

As most of us know, Acronis True Image can create a recovery partition, that is available while starting up a pc / laptop with F11 key. While it sounds like i great idea, there is one issue with this. It's price for Acronis.


So i've been thinking as well with using a google to find a similar software, that can do same thing. But my google skills aren't as good as i would like it to be.

Here i'm asking for your help guys. If you have found one please let me know. So far i've found this one

create a bootable recovery partition to restore a pc. like oem's F11

ANARETHOS RECOVERY TOOLS with MEDIA CREATOR


but ... well just want to know is that everything ? Or there is other software that can help me creating recovery partition.


Yes i do understand i will need space from my Hdd. Not sure what else could possible go wrong


Cheers in advance for your help

szametu


Ps. Please excuse my bad grammar english. Still learning.

Answer:What software can create recovery partition ?

I would just create an image - beats reinstalling.

3 more replies
Relevance 85.28%

In a fit of over zealous tidying up after installing Win 10 on my lappie, I deleted the 450MB Recovery Partition that the upgrade from Windows 7 created at the end of the main partition.

1) What was actually in that partition and why would I want it.

2) If I do want it, how to re-create it ...?

Thanks
Dave

Answer:Re-Create that 450MB Recovery Partition?

Recovery partition is where Windows stores the WinRe.wim which allows you to create a recovery disk or get into the recovery environment to repair/Trouble shoot/Restore/Reset/Refresh etc...

Now that you've deleted it. Those features won't be available and you won't be able to create a USB Recovery disk.

9 more replies
Relevance 85.28%

Hi Guys,

So, I have a Toshiba Satelite L505-141 (from Greece) and my hard drive broke. Unfortunately, I have lost my recovery discs. I have changed my hard drive, I have installed the OS but I would like to have my computers as it was (with all crapwares ... Wink )

I found a guy with the same laptop and he can send the recovery disc. Actually, he already sent me the 2 disc (he sent me two copies of his CD online) that he created when he bought the laptop (through the Recovery media creator). Those discs though are not bootable and (I read) that you just use them and when you restart the system goes through the recovery wizard. Unfortunately, it didn't work for me (at least with the CD my friend sent me).

Do you know any way that I can do it? I mean to get from my friend a recovery disc? Can he create an ISO from his recovery partition?

Any suggestion is welcome!

Message was edited by: GeoKoro13

Answer:How to create bootable DVD/USB from Recovery Partition?

Hi

To be honest I don?t have experience with this stuff but i found very interesting document in Toshiba knowledge base - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

Check it out.

7 more replies
Relevance 85.28%

I've successfully created a Windows 7 Recovery partition as follows in the past, but when I try this with the Windows 10 Installation DVD or flash it says permission denied:
Windows 10: Create a System Installation Partition to install Windows (Installation Partition, not image)

1.) Boot From the Windows 10 Installation USB Flash drive and choose cmd from troubleshoot.

2.) Create a 16GB partition at the beginning of the hard drive, then partition the rest of the hard drive as you wish as follows:

Diskpart

select disk # (note:where # is the number of the partition in the output of the list disk command.)

Create Primary Size=X (where X is in megabyte hint: 16 GB is exactly 16384MB)

3.) Copy the entire USB Flash drive on to the 16 GB partition and make the partition bootable.

Open the command prompt and type this:

diskpart (note if not already in it)

list disk (note: disk number next to disk)

list volume

select volume # (note:where # is the number of the partition in the output of the list volume command.)

list partition

select partition # (note:where # is the number of the partition in the output of the list partition command.)

delete partition # (note:where # is the number of the partition in the output of the list partition command.)

select partition # (where # is the partition you want to format on the disk note the number beside partition in the list partition output.)

create partition primary size=16384

Active

FixPar... Read more

More replies
Relevance 85.28%

I want to create 2 partitions in my hdd but I have no idea how to do it. I have 80GB hard disk. I have recovery CD and I want to ask if anybody knows is this possible to do it by that recovery cd.

Thanks for any help!!!!!

Answer:How to create partition in Satellite 105 via recovery CD?

Hi nina,

Use the Expert Modus with the recovery CD.

You make a Partition with the recovery CD

- Choose ?Expert mode? pressing number two
- Click OK and press ENTER
- Choose LOCAL - DISK - FROM IMAGE
- Look in: must be selected to CD-ROM drive
In the middle window choose GHO file and press ENTER
- Using TAB button you must mark information about drive and so on and press ENTER
- Using TAB button mark again middle part of window (blue line) and with space bar activate ?New Size? box
- Put inside new partition size and press again ENTER button
- The question ?Proceed with disk load?? confirm with OK

or use the Partition Magic 8 this is a good and a simple Software for Partitions of the HDD.

I Hope this is a Help

By

2 more replies
Relevance 84.46%

Hey Guys,

Looking for your advice and any links if any...cheers in advance

My Situation

In December 2009 I purchased a Toshiba Qosmio X500 - Model No. PQX33A-00X00J

At the time I upgraded my purchase from Toshiba Reseller BD4U, going from the standard 1x 500GB Sata drive + 1x 64GB SSD... to instead having 2x 500GB sata drives. I purchased with 3 year onsite next business day warranty, that is is now expired.

It came loaded with MS Win 7 Premium Home Edition - but no disks provided.
My Needs
I need/want to factory reset my PC - its starting to run slowI need to re-partition from my existing 4x partitions to just having 2
The Issues
Possibly as a result of upgrading the disk drives at time of purchase, I don't believe I have a hidden Recovery partition in order to do a System Recovery from the Hard Disk Drive - see image of my current partitions attached I don't have Win 7 OS installation disks or Toshiba Driver disks as they should have been installed by Toshiba
My Questions
Do You agree that I DONT have a Recovery Partition - when looking at the partition image? I'm confused on this point coz people say its hidden!?Given I have no Toshiba Drivers Disk or Windows 7 OS disks - what should I do? I'm thinking of downloading Win 7 (use my product key from sticker under PC) and making a disk/USB (but need to learn how)Is this where I get ALL necessary Toshiba drivers for my PC from?Does Toshiba provide a link on its site and instructions on where to get Win 7 ... Read more

Answer:Qosmio X500/00X System Recovery (Factory Reset) From Hard Disk Drive or Separate Disk

Sorry the model is Qosmio X500/00X

3 more replies
Relevance 84.05%

Hi I am new to forum and have very limited computer knowledge. I need to restore my Thinkpad edge 15 to factory settings but when I press enter to interupt normal setup, Rescue and Recovery workspace doesn't open. All I get is 3 options: to start up from temporary backup disc or something like that, enter BIOS setup, or enter normal startup. How can I access the Rescue and Recovery Workspace to access Full Restore? Any advice or help would be very much appreciated...PLEASE!

Answer:How to restore factory settings from Rescue and Recovery Partition?

Hello mate, Press F11 instead of enter.





__________________________________________________________________________________Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

2 more replies
Relevance 84.05%

I've got the same problem, my R61 came with XP&160GB HDD, now I've bought new 500GB HDD and Windows7. Everything is good, but I don't know how to get all functions of "Restore and Recovery" especially Custom Factory Recovery as it was in the past Now the only way of using Restore and Recovery is to make clear installation + drivers and software from lenovo, then making backup to be secure for future but it's not the same like it was.Anybody knows how to prepare? Ps. Sorry for my bad english.

Answer:Re: R61 - Windows 7: creating partition to get Custom Factory Recovery - How to ?

Hi and welcome to the forum!

You can only use Win 7's custom factory recovery through RnR's hidden partition if have lenovo's factory load, nonetheless you can still install RnR in Windows and make a backup on DVDs, USB drive etc.

Hope this helps.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Espaņol Visit my YouTube Channel

1 more replies
Relevance 84.05%

hi,

I just ran into a problem during my upgarding my laptops to win 8 pro from win 7 and also win 8

2) I have discovered that my laptop which came with win 8 which i upgraded to win 8 pro with a dvd, has had the contents of the hidden partition deleted in the upgrade process [as told to me by acer][that is i can no longer go back to factory default settings ever!].The hidden partition is going to be returned to original condition.So i would like to copy the image of that hidden partition somewhere,where i can copy it back onto the hdd hidden partition should this ever happen again for whatever reason.But not onto a dvd,either a externall hdd or usb stick if its possible.

2) i have another acer laptop which i have also upgraded,but from win 7 to win 8 pro.
And it seems that the hidden partition and the factory default settings in that laptop have been untouched!! as i have just restored it back to factory condition.
But i would also like to copy the hidden partition for this one.
And i also have other laptops with hidden partitions with vista and xp.

[so win 8 will delete the factory settings in a hidden partition when it is an upgradde from win 8 to win 8 pro but not from win 7 ???

What are the ways to copy the hidden partition for ones i know how to remove the hdd and ones that i do not?? In a way that is easy to copy back to the hdd concerned.

Thanks in Advance

Answer:copy hidden partition used for recovery to factory default

For all notebooks with all OS's

   Information

We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.











Originally Posted by win8user2013


2) I have discovered that my laptop which came with win 8 which i upgraded to win 8 pro with a dvd, has had the contents of the hidden partition deleted in the upgrade process [as told to me by acer][that is i can no longer go back to factory default settings ever!].The hidden partition is going to be returned to original condition.So i would like to copy the image of that hidden partition somewhere,where i can copy it back onto the hdd hidden partition should this ever happen again for whatever reason.But not onto a dvd,either a externall hdd or usb stick if its possible.




DO NOT USE THE DVD TO UPGRADE, as you will make the Recovery Partition UNUSEABLE.

Use Windows 8 Pro Pack.

To upgrade Windows 8 core, you need to use the Pro Pack.
To upgrade to Pro Pack
No install files needed.
Only the Upgrade key is need.
Add Features to Windows 8

2 more replies