Computer Support Forum

Wireless to Ethernet

Question: Wireless to Ethernet

Simple question,

I have a Wireless network in my house, in my garage i have a workroom, with a 5port hub and no wireless cards. If I buy a wireless bridge, can i plug it into the hub and bind it to my network, to allow computers to be plugged into the hub and get an IP?

So in essense want to take a wireless source and convert it back to ethernet in a specific location

Relevance 100%
Preferred Solution: Wireless to Ethernet

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Wireless to Ethernet

I believe so. I have looked into doing this in my living room for my ReplayTV and future media server.


PS: You bastard
"The Car: 2002 Porche 911 Conv. ; PES Tuning ECU ; Brembro Grand Turismo Brake Kit "

7 more replies
Relevance 51.25%

if its even possible. I have a laptop with wifi and it also has a ethernet port on it, could I be connected to the internet via wifi and then send that internet out of the laptop's ethernet port to another device to give that device internet?
 

Answer:convert ethernet port on laptop to wireless ethernet bridge

yeah, it's called Internet Connection Sharing if you're running windows.
Posted via [H] Mobile Device
 

19 more replies
Relevance 47.97%

Are you guys aware of a single pci card that offers the typical ethernet connection as well as a wireless one? I'd like to have the option to connect to either and I don't want to get two seperate cards. Any info is appreciated, Thanks
 

Answer:10/100 Ethernet/Wireless Ethernet PCI combo

I don't think you can do that but I would go wireless. :bounce:
 

1 more replies
Relevance 46.74%

Hi, I currently connect to the internet through a wired ethernet port in the wall which connects to my university's network.

I want to make this wireless since I bought a new macbook and was wondering if this product would do it? http://www.amazon.co.uk/dp/B006PYGWG6

I don't know much about it but I was concerned because the Router Mode says 'cable connection only' and I'm not sure the connection is cable (is it ADSL?). Will I need anything else like a modem?

Any advice?
 

Answer:Making an ethernet university connection wireless with TP-LINK Wireless Travel Router

6 more replies
Relevance 42.23%

Hello,

I have a PC with wireless connection to the Internet (PCI wireless card). Is it somehow possible to use the Ethernet port (NIC) to PROVIDE network access to a device? (such as a D-Link internet camera with ethernet connection).

Thanks for your help!

Johnathon
 

Answer:One wireless, one Ethernet, can I use both?

Using Client OS (I.e. Not a real server like Windows 2008) you cannot use two Network Cards (does not matter wire or wireless) that are connected to the same Network (I.e. same Wireless Router/switch etc.).

You can use both only if they are configured to two subnets (Two independent Networks).
 

2 more replies
Relevance 42.23%

Hello,

I have a PC with wireless connection to the Internet (PCI wireless card). Is it somehow possible to use the Ethernet port (NIC) to PROVIDE network access to a device? (such as a D-Link internet camera with ethernet connection).

Thanks for your help!

Johnathon
 

Answer:One wireless, one Ethernet, can I use both?

11 more replies
Relevance 42.23%

Here's something that is causing massive loss of hair.....

My PC is connected to my router with a wireless card. I also connect my PS2 to my PC using an ethernet connection (the ps2 is "modified" and I use this connection to play music and video thru the ps2 to the TV).

Everything works fine with one exception. It seems like the wireless is not getting a DNS. To obtain one, I have to disable the ethernet card, connect to my AP, then enable the card. If I lose my connect with the AP (which happens sometimes, it's on the other side of the house and the signal is a little weak), then when it reconnects I have to do the whole disable/enable thing.

It's not a huge deal, but I do like my stuff to work properly and usually things like this are not problem for me, but this one really has me wondering. Anyone have any ideas?

Here's my ipconfig /all if that helps. What's odd is the ipconfig is *exactly* the same when I can connect and when I can't. So maybe it's not a DNS issue, but something else. But I am unable to connect to any web sites until I disable and re-enable the ethernet card.

Windows IP Configuration

Host Name . . . . . . . . . . . . : HAL
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain.actdsltmp

Ethernet adapter Wireless Network Connection 3:

Connection-specific DNS Su... Read more

Answer:Ethernet and wireless on same PC

6 more replies
Relevance 42.23%

My BT HomeHub is in the same room as my PC and I have a wireless card.
I can also connect my PC to he hub using an ethernet cable. Which is preferable, also would one allow faster downloads over theother.

Answer:Ethernet Vs Wireless

A wired ethernet connection will always be more reliable than a wireless connection. In terms of speed, this is likely to be most significant in a Local Area Network where files are transferred between computers.
As far as the internet is concerned, unless you have a broadband connection of about 50Mbps, your connection from the computer to the router will always be much faster than your download internet connection, so wired or wireless makes little difference. Having said that, if you are running more than one computer "wirelessly", the available bandwidth is shared by them, unlike wired connections where each will have the full speed of the router's network switch, usually 100Mbps.

1 more replies
Relevance 42.23%

Is there such a thing as a 5 Ghz Ethernet card, or is just 5 Ghz wireless?

Answer:Ethernet vs. wireless

No - 2.4/5 GHZ refer to the wireless frequency.

Ethernet comes in two speeds mostly - older 100 Mb/s (100 megabits) or more modern 1000 Mb/s (1 Gigabit). Of course, these are usually much faster than internet speeds even for slower 100 Mb/s unless you have amazingly fast broadband.

1 more replies
Relevance 42.23%

I have a Linksys BEFW11S4 4 port wireless broadband router with 2 x wireless laptops that can see each other and share files fine. I also have a PC which is hardwired to the router. All 3 machines have an IP address from the range I configured and all 3 machines can access the internet. The problem I'm having is that my hardwired PC cannot see the workgroup I have set up so therefore it can't see the 2 wireless laptops. The 2 wireless laptops can see the hardwired PC but cannot connect to it to view the shared folders.

I have switched all firewalls off, changed lots of config in the router, reset it to default, rebuilt my hardwired PC, pulled out some hair, changed network settings all over the place but just cannot get the hardwired PC to see the workgroup.

Any suggestions anyone ! !
 

Answer:! ! ! ! ! Ethernet Can't See Wireless ! ! ! ! !

Well, as long as all three are getting DHCP addresses from the same network, then the router isn't to blame, so, get it configured and leave it alone.

You say you've setup a workgroup for the laptops. That desktop machine also needs to be a part of that same workgroup. Then, you need to have the same username and password combination on the three machines, and then the desktop should be able to share files with the laptops.

And you definitely want the firewalls disabled until you get things working.

-Scott
 

1 more replies
Relevance 42.23%

Hi

My W8 PC is connected to the Wireless Router by Ethernet Cable, the PC also
has Wireless connectivity; is it possible to connect to the Router with both at t
he same time and if I do will that improve internet speed?

Thanks

Daniel

Answer:Ethernet and Wireless

Your internet speed is determined by your provider and the package you have, it is irrelevant how fast your connection to router is as long as it is at least a little faster than speed to the provider. So you can not change the internet speed above what provider gives you.

2 more replies
Relevance 42.23%

should I enable the wireless when I want to use the ethernet, my wireless works fine, but when I try to connect with ethernet, either no connection or connection drops after a short time, It is a dell desktop with windows xp,with netgear switch, and comcast modem,with mac airport, I need to get my ethernet high speed working that I pay for. PLEASE someone help
 

Answer:ethernet and wireless together

If I am going to use ethernet for an extended time I remove an external wireless adapter or switch an integrated wireless off. But that's to extend the life of the unused component and to save the battery if on battery. If you are using a PCI wireless card with the desktop then disabling it is probably the best you can do. But that is not going to impact your ethernet usage, so it is really your choice.

Please show the following for when you have an ethernet connection and for when it has dropped ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

3 more replies
Relevance 42.23%

Hi, I have a Pavillion dv7-1129 wm laptop. With Windows Vista Home Premium ... Amd Turion (tm) X2 dual-core moble Rm-72 2.10 GHZ...Ram-2814... 32-bit Operating sytem
Can anyone provide me with the drivers for the Wireless and Ethernet connections

Drives for a Realtek RTL8101 Family-PCI -E Fast Ethernet NIC (NDIS 6.0)

Thankyou
 

Answer:Ethernet and wireless

12 more replies
Relevance 42.23%

I just installed a wireless card. but i want the Ethernet to have priority over Wirless how can i do that?

Answer:Ethernet and Wireless

It should do it automatically when an ethernet cable is plugged in.

9 more replies
Relevance 42.23%

The office setup is wireless. When the printer throws a wobbly we're stuck until the support chap arrives. (They're good but busy.) There is an old Xerox machine which is not connected to the PC and is used for copying only. I checked the manual for this printer, online, and the connection to the PC is given as enthernet. I don't suppose it's as easy as plugging in an ethernet cable. Is it possible to connect this printer and use it in a wireless setup?

Answer:Wireless and ethernet

Depends on the model of the Xerox, the operating system and availability of drivers. I suspect that you may be able to connect it to the router by ethernet (not to the pc) and then use it. Are you sure that it is ethernet to pc?

6 more replies
Relevance 42.23%

I am with o2 and use their wireless router. I have used it wirelessly for the last three years because it was too far away from my computer. I use Windows 7 Home Premium 64bit and the internet connection strength at the bottom of the screen shows up to three bars (normally only two).
This morning I managed to connect to the router using a 5 metre ethernet cable and the strength has gone up to four bars.
I can't see the difference. A speed test shows the same speeds 2.6 down 0.7 up.
Would I be just as well off being wireless? What difference does the strength from two bars to four bars make?
I would appreciate your comments please.

Answer:Wireless or Ethernet

Interesting reading here enter link description here

6 more replies
Relevance 42.23%

Hi,I would like to know wether I could change my present USB Wireless connection to the ethernet connection.At present I am on BT Home Hub Box connected with a "2WIRE" USB wireless.All is OK but I find using my webcam my picture freeze's upnow and again and my last word spoken repeats about ten times.I think it might be better to use the ethernet wire as I now have the Home Hub box closer to my P.C. I would like to just change over rather than have to re-engineer the system in case I want to change back,any help would be great.Sam Gee

Answer:Wireless to ethernet

You could just try sticking the ethernet cable in and removing the usb. If it does not work you will have to run the setup cd again. If this cause problems you can always run system restore to put you back where you were.

4 more replies
Relevance 42.23%

i have got a [email protected] G-Gateway which plugs into the back of desktop pc through the ethernet socket. i also have a laptop that has a wireless card built in it.i have set it up so i can run BB on my laptop through the gateway and also my desktop can access BB because of the ethernet cable. My desktop doesnt have wireless card.I wanted to know if i can get the two pc's to see each other on a network, this is so if my laptop is being used inanother room they can see what i am doing on my pc and vice versa and i could also swap files between the two of them. I have tried to set up a network using the XP wizzard but it says that a network cable is disconnected from my laptop so it wont connect to my pc. i know that it is disconnected cos i want to use the gateway to talk to my pc through the wireless.can anyone help please?

Answer:ethernet and wireless together

You might get a better response by posting this thread in the Networking forum!If I understand you correctly your set up should allow you to Network in the way you want. You'll need to make sure the Desktop and Laptop are connected to the same Network - i.e they are on the same named network. Run the Network wizard on your desktop and note the exact names you enter, then select 'make disk' option at the end and place the disk (could be a USB Stick) in the Laptop and run the file created by the Desktop. You will have needed to select File/Printer Sharing when you first ran the Wizard.If you go 'Show all connections' and right click on the LAN card you can select 'Properties' - this tells you the protocols you have active (Client for MS Networking, File/Printer Sharing, TCP/IP).Finally check which files you have set for 'sharing'. Never share a whole drive on a WiFi network!Good luck!

2 more replies
Relevance 42.23%

A little confusion here - When I log onto my Verizon router page (that 198.xxx thing), I show many menus but the following 2 have me a little confused. One says "network connection" type is: Ethernet - I do have a yellow cable coming out of my Actiontec router to the pc so I get that. Another menu says "wireless settings" and this says "wireless" which I have set to WPA and the mode is 802.11g "only". Is this system wireless or ethernet or both? I would like to do the pc to tv connection for netflix movies at some point.. Am I all set with this configuration? (knowing I have to buy a box of some sort, Roku or Apple or something) and if I do have a wireless connection, can I connect the two without cables running from one to another? Hope that is all clear. Thanks in advance.
 

Answer:Ethernet or wireless?

Is this system wireless or ethernet or bothClick to expand...

both

you have a wireless router - and so you can connect to the router with a cable as you currenty are doing and other devices PCs etc or your PC can also connect with wireless
I would like to do the pc to tv connection for netflix movies at some point..Click to expand...

someone else will need to answer the netflix service

from what I can see on the website
http://www.netflix.com/HowItWorks#faq1
you can watch via a PC


http://www.netflix.com/HowItWorks#faq1
Can I also watch instantly on my PC or Mac?

Yes. Simply press Play on any TV episode or movie to instantly watch it online on your Internet-connected PC or Mac.Click to expand...

so you can watch directly on your PC without any other device - and then if you have your PC video output connected to the TV you should be able to watch on TV via PC

whats the make and model of TV
- what outputs do you have on the PC video card ?
- what inputs do you have on the TV

if you have HDMI on both - then you should be able to use that - although for some copyright materials you will only be able to display on the TV and not two monitors
 

3 more replies
Relevance 42.23%

Is there such a thing as a 5 Ghz Ethernet card, or is just 5 Ghz wireless?

Answer:Ethernet vs. wireless

No - 2.4/5 GHZ refer to the wireless frequency.

Ethernet comes in two speeds mostly - older 100 Mb/s (100 megabits) or more modern 1000 Mb/s (1 Gigabit). Of course, these are usually much faster than internet speeds even for slower 100 Mb/s unless you have amazingly fast broadband.

1 more replies
Relevance 42.23%

My local vet's PC uses the ethernet port to connect to Vetcomm through a router. Until now, normal internet access has been through dial-up. He now has broadband. I fitted a wireless USB adaptor which installed OK, but won't connect to his new BT router - it shows as 'disabled' and won't let me change to enabled.
I'm sure it's a settings issue, but never had to deal with a similar situation to this.
Grateful for any thoughts.

Answer:Ethernet OK, but no wireless

I believe that you have to enter the configuration pages of the Home Hub to enable the wireless.
This article should guide you through it.
This article explains how to log onto the Home Hub.

10 more replies
Relevance 42.23%

So my wireless works well and fine, but the only problem is is that it disconnects time from time and i'm trying to download a 15 gb file that has no resuming capabilities. I want to use my ethernet connection rather than my wireless, but the ethernet (local area connection) isn't showing when I go to Control Panel/Network and Sharing Center/Manage Network Connections. I only see Wireless Network Connection. I have a router and a modem. the router is a linksys cisco. And my cable modem is linksys wrt45 or something. How can I fix this? My other two computers are using the ethernet cables fine.

Answer:Wireless but no ethernet

Download and run VistaForums SysInfo Tool (Select All and export to a file) on the laptop you're having trouble with, and upload it.

Ed

4 more replies
Relevance 42.23%

I'm having problems connecting my PC via ethernet cord to the internet. We just got cable today and one of our PCs has a wireless card, when the other one doesn't. My computer is the basic one with the specs in my profile. It only has a dialup modem. I don't know if I have to configure something to the router or modem, but when my computer is hooked up to the router(the internet still doesn't work then) all other computers on the network won't connect to the internet.

Any help will be appreciated!
 

Answer:Pc not getting wireless through ethernet

16 more replies
Relevance 42.23%

hi, i am using a wireless connection but to play bf2142 well i need a wired connection. i have got an ethernet wire going from the wireless router to computer, and it works [i disable the wireless connection and i connect to the web through the wire]. but i want to use my ethernet wire as my PRIMARY way to connect to the internet, but still want the wireless connection active for my computers upstairs to connect to the web.

does this make sense?

is this possible?

thank you

denny
 

Answer:using ethernet instead of wireless???

15 more replies
Relevance 42.23%

Hi everyone

I dont really know whether this is really relevent, but I was just wondering. If I have both ethernet cable and wireless on one computer as 2 networks. Can I join up both of them to increase my internet speed or somthing. I tested both of them seperately and the ethernet cable was much faster than the wireless. My router is next to my computer. Can I have some tips. I will be putting some screenshots later.

Thanks in advance

Answer:What can you do with both ethernet and wireless??

  
Quote: Originally Posted by mw2


I tested both of them seperately and the ethernet cable was much faster than the wireless.


Surprise, surprise...

9 more replies
Relevance 42.23%

Hey all im new here, and this is my first post.
First of all I have a DSL connection through my provider. I then have a NetGear FM114P wireless firewall/print server (router ) attached to the modem.

My computer is currently hardwired through the ethernet port in the FM114P router with two other computers connecting by WiFi.

What i was thinking, was loosing the ethernet cord and turning this computer in to a wireless connection like the other two, but if i do will i loose speed? This computer currently gets between 700-950 kbps., depending on traffic.

thanks
mausie
AKA foufymaus
 

Answer:Ethernet -vs- Wireless

9 more replies
Relevance 42.23%

I need to know if this can be done. The situation:
Desktop has a integrated 10/100/1000 ethernet port.
-Apartment the owner lives in has Free Wifi for all residents.
-Desktop has no room for wireless card, is under warranty, and owner doesn't want to crack the case.


Is there a device that can be used to plug into the Ethernet - to a "hub" of sorts, to transmit wirelessly to get the free Wifi signal? (so internet browsing is possible upon this particular PC without voiding warrenty or paying for seperate net...)


if so... link examples or provide exact names. I am getting mixed results with Google.

I know some USB wireless devices are available for this - but those can get pricey, and the owners don't really have any open USB (so a hub would be needed on top of it... which is more money and probably more expensive in the long run.)

Answer:Ethernet to Wireless...

USB wi-fi would be the easiest and cheapest solution. Otherwise you would have to run an ethernet cable from your computer to the source router or a router picking up the signal - which doesn't sound like an option either.

Do you really not have ANY free USB ports?

3 more replies
Relevance 42.23%

This is, perhaps, an extremely silly question, easy to answer as the Techguy says! I have been using a desktop with Ethernet LAN (Landline) for years. Now, I have a Dell Studio 15 Laptop with Wireless output signal. My question is, How do I connect the two, so that I can use the Laptop too through my land-line broadband connection? Do I use just a wireless router in between? Any type of Wireless Router, or, any specific type? Do I need to change anything in my desktop LAN setup?
 

Answer:Wireless to Ethernet LAN

6 more replies
Relevance 42.23%

So I just bought myself a new laptop (hp dv6910us) and I'm enjoying it thoroughly but I have a very basic question about what to use in terms of internet. In my apartment, I can easily connect to the internet through my ethernet connection or through the wireless. Both are smooth, fast connections. In terms of increasing the lifespan and battery-life of the computer, should I stick primarily to connecting through the ethernet or through my wireless connection? I have an Atheros AR5007 802.11 b/g WiFi adaptor and my processor is an AMD Turion X-2 TL-60 2Ghz with 3.00GB RAM. Running windows vista 32 Bit. It's a general question, not a pressing issue so answer at your leisure. Thanks.
 

Answer:Wireless vs. Ethernet

Not sure if anyone has ever bench marked something like that. But my gut feeling is that the wireless would draw a little bit more power but I have no evidence to back that up.
 

3 more replies
Relevance 42.23%

In my house i have a desktop computer connected to internet broadband via ethernet cable to a virgin set top box. I have bought a laptop and want to set up a wireless connection for it. If i want to do so, can i continue having my desktop connected via ethernet aswell as a wireless cable router?thanks belta

Answer:set top box wireless and ethernet?

Try getting a 4 port Wireless Cable Router, the sort that gets its input using an ethernet cable (not the more common ADSL Modem Router type)By plugging your existing ethernet cable from the Virgin box into the routers input WAN port then connecting to your desktop from one of the routers output LAN ports using another ethernet patch cable (routers usually come with at least one in the box) after that all you may need do is access the router setup page and turn on the wireless part but the manual will explain how to Cheers HC

1 more replies
Relevance 42.23%

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics, -1988 Mb
Hard Drives: C: 465 GB (273 GB Free); E: 5 GB (0 GB Free); F: 143 GB (0 GB Free);
Motherboard: MSI, H67MA-E35 (MS-7680)
Antivirus: Avira Antivirus

I used to access my home wireless with a Netgear N150 Wireless USB adapter. The device still works, because I use it for Roku, but my computer can't access the wireless network with it. As a replacement I installed a TP-Link 300Mbps Wireless N PCI adapter (TL-WN851ND). That hasn't worked from the start. During the course of trying to fix the problem, I changed at least 10 different settings, and none of them worked. Now, I've lost track of all the changes I made. What I want is to erase all of the previous settings and connections and act like my computer is fresh out of the box and has never been connected to the internet before. The TP-Link is what I want to use. Not knowing as much as everyone else on here about computers, I am assuming that the Netgear and TP-Link aren't the problems, and it is instead something with my computer. Is there some type of checklist I can go though step by step to see exactly what the problem is? I don't know if there is physically something wrong with my computer that I can fix by buying a... Read more

More replies
Relevance 42.23%

Hi there,
I'm having troubles with our new router. I can connect via ethernet but not through wireless. I'm certain it's an issue with my laptop, as I've managed to connect several other devices without any problems. Any help would be appreciated as I've tried everything I can think of.

Below is the result of "ipconfig /all" with the ethernet cable connected.

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\WYN>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : WYN-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : dlink.com

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : dlink.com
Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Adapter

Physical Address. . . . . . . . . : 00-21-63-CD-F0-BD
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d91f:81b7:31ff:4ac1%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 01 August 2012 10:36:26
Lease Expires . . . . . . . . . . : 02 August 2012 10:42:13
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . :... Read more

Answer:Ethernet Yes, Wireless No?

------------------------------------------------------------------------
Atheros Wireless Adapter - AR5007EG & AR5007
Over the last couple of years we have been seeing a lot of problems with the above adapters, mainly concerning WPA and WPA2 encryption and mainly on windows Vista.
We have seen just a couple of issues on other windows operating system, windows XP and windows 7.

Windows XP:- A driver update has resolved the issue
Windows 7 :- No conclusive results for a fix

The wireless adapter gets an IP configuration, and shows as connected, but communication is non-existent or sporadic.

Log into the Router and disable the wireless security and see if you are now able to connect to the internet and surf OK.
Please post back a reply here, and let us know if that works or does not work.
If you post back the make and exact model of the router - we can advise how to disable the wireless security

Here are a number of possible solutions

--- 1) In Device Manager right click on the wireless adapter and "update driver."

--- 2) Download and install the latest wireless driver from your laptop manufacturer's web site support section,

If you post a reply here with the Make and EXACT model of your PC, along with the windows version you are running. we will see if we can find a link to the driver and will post a reply with the link here.

--- 3) On one occasion re-setting the router back to factory default and re-configuring the router settings has resolved t... Read more

3 more replies
Relevance 42.23%

I've just moved into my Halls at uni in London. We have to use a CAT 5E ethernet cable to connect to a socket in the wall. When we open a web browser we have to enter a username and password to be able to go online. I was wondering if there is any bit of Hardware which i could plug into the ethernet wall socket which would then broadcast that ethernet connection as wireless and if so if it is possible to protect the connection so others cant use the WIFI.

thanks
 

Answer:Ethernet to Wireless, is this possible?

When we open a web browser we have to enter a username and password to be able to go online.Click to expand...

That probably means that they want to restrict usage to one computer per connection and do not want wireless networks set up. So, please check with the IT department before doing anything, as it's not very hard for them to detect violations.

On the assumption that you will not attempt this unless it falls within the rules, you can use a Wireless Access Point (WAP). Use encryption, preferably WPA2-PSK, AES, but at least WPA-PSK, TKIP. Use a passphrase that cannot be guessed and does not include dictionary words.
 

1 more replies
Relevance 41.82%

Basically I wish to connect my Panasonic tx32-le5b tv to my n150
Modem router, but I'm also considering connecting another Panasonic tv downstairs and maybe in the near future a ps 4, my belkin router doesn't offer the fastest wireless speed and I'm sure coverage isn't brilliant by today's routers, so I'm considering upgrading to at least a n750 spec modem router, but is it worth spending a bit more and going for 802.11ac spec? My main reason for considering this is better wireless range rather than speed. My other question is what's the difference between wireless adaptors and bridges? Well what are bridges lol basically I want the best coverage I can get and good speed would be nice but if 802.11ac is overkill then please do tell me lol thanks people for the kind help, I hope I can return the help at some point

Answer:Wireless Ethernet adaptors

Forgot to say, can anyone recommend an adaptor that'd fully make use of whatever spec wifi I go for, ie are their any 802.11ac adaptors available or one that'll fully use the best of the current dual band 802.11n routers

1 more replies
Relevance 41.82%

Hi.
im currently in rented accomodation and the internet is via a wired ethernet cable. i am not admin on the network. but im interested in a quick way to make a small wireless network using the ethernet so i can use wi-fi in my room.

looking for a cheap, simple option.
i have a bt voyager router available to me if that helps?
but i assume there's a small device you can buy that will transmit a short range wireless signal and work as the exchange between me and the network.

thanks!
 

Answer:Ethernet to Wireless - non admin

11 more replies
Relevance 41.82%

I have a cable modem hooked up to my router, and the ethernet cable from my router to my computer. internet and wireless were working just fine for about a month up until yesterday. it just stopped. now, either my ethernet will connect or my modem, but never both, which will not allow me to have wireless. i've tried resetting both the router and modem, but no luck. any help is appreciated. thanks
 

Answer:wireless and ethernet problem

7 more replies
Relevance 41.82%

Hi simple question.I have a Belkin 54 wireless/router and would like to know how I use the ethernet connection instead of going wireless, as I see that the latter is slower.I can see both icons wireless and ethernet and yet if I switch off the wireless how do I connect to the web using the direct cable connection?If I disconnect the elethnet cable I can't see the cable icon..

Answer:wireless or ethernet connection

>>> like to know how I use the ethernet connection >>> instead of going wirelessYou just plug an ethernet cable between the PC's RJ45 network port and one of the router's LAN ports. Unlike a "wireless" connection, you don't have to go through any procedure to "Connect" to the network.>>> I see that the latter is slower.Standard 802.11g networking has a nominal data transfer speed of 54Mbps, although in practice this is likely to be closer to 30Mbps. A wired ethernet connection to your router will run at 100Mbps. This higher speed is only significant for transferring files between computers in your local network, because even 30Mbps will be well above the speed of your broadband connection, unless you are on something like Virgin Media's 50Mbps Cable service.

3 more replies
Relevance 41.82%

Hi. I got a wireless router but it needs to be connected to a modem via an eternet cable. My modem is usb. I have 2 questions:1. Because I am looking for a new broadband provider there is one who provides modems with an ethernet connection or 2. There is any small device or cable that allows a connection between an usb port and an ethernet port?....Thanks

Answer:Wireless router with ethernet but not usb

You will need a new modem - however most ISPs bundle a "free" ADSL modem with their broadband package so if you are going this route look at what's offered in the package

4 more replies
Relevance 41.82%

I am currently getting my broadband using eclipse whom I am very happy with.I use a gateway (ZyXEL P-600 series Model p-660R-D1, I assume it is a gateway as eclipse sell something similair and call it a gateway). I have tried to split this before by plugging the ethernet into an old hub (netgear dual speed hub DS104). Unfortunately when I tried to run two PCs from the Hub when the 2nd Connection was made the 1st connection was dropped.Now I am trying to get a wireless router which also has ethernet connections. Do I need to get one that includes a Gateway or was the problem down to an old hub? I have quite a medium sized house so would need two antennaes I have been told. Would anyone be able to recommend any joint wireless /ethernet routers and do I need to get it to include a Gateway as well? Or might it be a problem with the internet provider.

Answer:Wireless and ethernet Hub/Router

When you connect to the internet with a Router, the Router *IS* the Default Gateway for any computers connecting to the internet through it. >>> I have tried to split this before by plugging >>> the ethernet into an old hub (netgear dual >>> speed hub DS104). Unfortunately when I tried >>> to run two PCs from the Hub when the 2nd >>> Connection was made the 1st connection was dropped.I would have thought that should work, although it might be necessary to use a Network Switch rather than a basic Network Hub. The way to check would be to see what IP address each computer connected to it gets by DHCP. If the first computer to connect gets your public IP address (as allocated by the ISP) then you are connected to a Modem and not to a Router. A Router will get your public IP address and allocate IP addresses to connected computers using one of the address ranges reserved for Local Area Networks, most commonly 192.168.x.x addresses.

4 more replies
Relevance 41.82%

I heard someone ask a question to a kid who knew a good amount about computers. The question was "If I have an empty ethernet port in my computer, could I configure my 360 to use my wireless internet?" The kid said yes, talked about some tool that is built in on XP and Vista. I missed the tool name, but instantly thought I would love to move my PS2 out of the basement, and into a room where it would actually get played.

So, the computer is connected to the internet through a simple USB wireless internet... stick. I was wondering if I plug my PS2 into the empty ethernet port in the back of my computer, how would I configure it to use the wireless network that is being picked up by the USB wireless card? I'm using Windows XP.

Thanks for the help.
 

Answer:Solved: PS2 to ethernet to wireless?

16 more replies
Relevance 41.82%

I usually switch off the wifi at work when I plug the ethernet cable into the laptop. Was wondering who is at work when both are plugged in and turned on? I'm guessing the wireless connection takes over and is the method running. But that's purely guessing.

i wasn't sure if this topic belongs in the 'hardware' or 'software' heading.
 

More replies
Relevance 41.82%

SInce I bought the HP Pavilion Notebook T1E85EA#A I have suffered from unreliable wifi. I had put this down to my router however I have replicated the issue on another connection/router. The wifi always shows as connected but the throughput seems to stop. I cant acess any web pages, cant access the router and unable to ping them command prompt as well. After a while it will suddenly start working again albeit the page loads will appear slow at times. Today I decided to try using ethernet as well however I have found this has exactly the same problem. Some of the diagnostics I have tried are as follows: Alternate connection method (ethernet)Alternate broadband connectionManually specifying tcp/ip settingsUpdating drivers (no new drivers found and the ones installed are from 2015), Tried from the HP software, windows update as well as in the device properties. Restoring windows back to factory spec but the issue continues. Is there anything else I can do to rectify the issue or should I send it back to HP?

More replies
Relevance 41.82%

Hey is there anyway i could use my computer to get on a wireless network and then hook my computer up to a wired router and share the connection? id like to get on xbox live using my wireless.( its fast enough) thanks
 

Answer:Wireless to ethernet question

What is the nature of your Internet source?


 

3 more replies
Relevance 41.82%

My daughter is at uni, in uni accommodation, where they have wired internet in their rooms but no wi fi. Is there something she can use so that she can set up wi fi so internet can be accessed in the communal kitchen area?

Answer:ethernet to wireless converter

This > http://www.broadbandbuyer.co.uk/Shop/ShopSearch.asp?CategoryID=57
may be what she needs.

4 more replies
Relevance 41.82%

Hi guys ,I am facing the weirdest problem . when I m trying to connect my laptop using wifi , my modem get rebooted ..all light gets off (DSL,WLAN,Internet) automatically . is it any malware or what ? I have updated my BIOS , my wireless driver ..but nothing worked .nd when I m connecting using ethernet its working fine , modem working smoothly .
 

Answer:Wireless not working, but ethernet does

Hi Sssstud,

Please let us know the message you see when you try to establish a wireless connection to the internet. Is your computer able to detect wireless networks? What version of Windows are you using and what is the model and name of the wireless router?

Thanks and regards,
Babita G
#iworkforDell


For easy access to drivers, manuals and product updates, please visit our Support Site .
 

3 more replies
Relevance 41.82%

hey,

I am trying to use my wireless router to convert my wired connection to wifi. i have two laptops in which i would like to use the wireless connection. Only router and one laptop have ISP mac registration. I would like to use my router as a bridge to conect to internet and then to trasmit wirelessly, so that i can use internet in both the laptop remotely. Is it possible?

currently one laptop is connected to internet and that too wired connection. it is having a static ip and gate way. How can i use this static ip and gateway so that the router makes the connection and later assigns a new ip to my laptops.

if you are still not clear about the question I can give you more details

can anyone please help me in this......

Answer:converting ethernet to wireless

I think I can help... but your not being very clear.

As I understand it, you have a Wired Router which is connected to the Internet. You want to connect a Wireless Router and use it as a switch, to transmit the data from the wired router to 2 wireless laptops?

So it would look something like this:

Internet>Wired Router>Wireless Router>Laptops

Is that right?

5 more replies
Relevance 41.82%

Hi friends,
i use my laptop mainly with wireless network,
i wonder if there is a setting to disable wireless network auto. when Ethernet cable plugged in (and vice versa)?

*without 3rd party app's

Thanx

Answer:wireless & Ethernet conflict

What conflict are you having?

I run my laptop wirelessly most of the time as well but occasionally connect a Ethernet cable and everything works fine.

9 more replies
Relevance 41.82%

This seems to be a common problem but after trying all that is out there (repairing and reseting TCP/IP Winsock, random You-Tube videos) I'm stumped. Here is my info from my cmd's IP config when I'm online and when I'm offline listed after that.

*ONLINE*

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Lisa
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8071 PCI-E Gigabit Ether
net Controller
Physical Address. . . . . . . . . : 00-1D-72-3D-89-61
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::48a5:e32d:4169:1d0c%12(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.84(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Sunday, July 24, 2011 10:55:52 PM
Lease Expires . . . . . . . . . . : Monday, July 25, 2011 10:55:52 PM
Default Gateway . . . . . . . . . : 10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.1
DHCPv6 IAID . . . . . . . . . . . : 268442994
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-0F-F2-AF-24-00-1D-72-3D-89-61

DNS Servers . . ... Read more

Answer:connect to ethernet not wireless

7 more replies
Relevance 41.82%

Hi! My father has a wired ip camera in his shop for security (which incidentally is in wireless range of my flat). I have suggested that he ditch his broadband connection because the camera is the only thing that uses it and that I could connect his camera to my wlan. Am I right in thinking that a wireless ethernet bridge would be the solution? I have a Netgear dg834gt as my modem/router.If a bridge is the answer would this product suffice?click hereI would like to stick to netgear for compatibility issues.

More replies
Relevance 41.82%

Hi all,My ethernet connection keeps being dissabled and I don`t know why, is having the ethernet cable really necessary or is the Wireless Router alright without it.My signal strength is excelent, is there any reason why I can`t leave that cable dissabled.I`m running Vista P/Win 7 dual boot.Many ThanksRussell

Answer:Ethernet Cable with Wireless

Wired or wireless,its up to you.

5 more replies
Relevance 41.82%

Hi, At work we have 5 computers all networked together via ethernet cables. We also have 4 stand alone computers that we would like to network via a wireless network so that they can share a broadband connection. So far so good. Can we also connect one of the ethernet connected PC's wirelessly as well. Would this work or can't you connect via Ethernet and wireless at the same time? Ta, Dennis.

Answer:Wireless and ethernet question.

You have also posted this in the Helproom. Please don't keep two threads open.

4 more replies
Relevance 41.82%

Just a simple question. My apartment complex has installed wireless ethernet. My desktop computer has a 10/100 ethernet card installed, but I suppose I need to purchase a wireless card. What am I looking at as far as installation? Does it slide into a slot, or would somebody who's never opened his chassis before be better of getting pro help?
 

Answer:Wireless Ethernet Card

The ones I have seen advertized just plug into the ethernet jack on the back of the computer....I dont have one but my best guess is check with the manager of the apartment complex to ensure you get one that matches their frequency.
 

3 more replies
Relevance 41.82%

I'm not entirely sure if an Ethernet Bridge is what I think it is.

For example: Linksys WET54G Wireless-G Ethernet Bridge

In a house with 3 laptops, a desktop, 2 wireless consoles, all in different rooms and 1 router.

If I buy a Linksys (or any) Ethernet Bridge, and run an Ethernet cable from my PS3 to the Ethernet Bridge, would I get a:

- better than wireless connection? (Like LAN perhaps?)

or,

- a connection similar to a wireless connection even though an Ethernet cable is running from the bridge

What I'm asking is, does the Ethernet cable running through the bridge get me a better connection? Almost as if I was running the cable from the router to PS3.
 

Answer:Wireless Ethernet Bridge

What I'm asking is, does the Ethernet cable running through the bridge get me a better connection? Almost as if I was running the cable from the router to PS3.Click to expand...

No. It's still wireless based on the same technology (if you go with an 802.11g bridge), so you're going to be constrained by signal quality and the protocol itself either way. However you can use it to improve things if you use a newer 802.11n bridge (and AP) than the radio inside your PS3.

It's still wireless though and you may still have throughput issues if there's any sort of interference or congestion in the band.
 

8 more replies
Relevance 41.82%

I'm stumped. My R40 Thinkpad wireless works fine but my wired controller in back keeps saying "network cable unplugged." All drivers re-installed, no yellow marks in device manager, TCP set to "obtain automatically," no viruses or spyware detected. Tried two cables, same result. Tried installing from Intel and Lenovo drivers, no luck. What did I miss? Thanks. 

Answer:R40 Wireless but no wired ethernet.

I got same issue though my wireless card dont start too.

3 more replies
Relevance 41.82%

Ok, here's the deal. I have my laptop getting wireless from a long distance (well, I will when I get my cantenna). My 360 is at my laptop and its too far for the 360 wireless adapter to reach. I want to have my laptop receive internet over wireless, and share it via switch or crossover cable with my 360. What do I need to set to make this work? Ive tried similar before and never got it to work.

Cliffnotes for the lazy
Have wifi inet on laptop and want to share over ethernet to other device
 

Answer:Sharing wireless over ethernet

Do a bridge connection on your laptop -- You're going to bridge your wireless adapter and your ethernet adapter.

However -- Your ISP (in this case, Wireless providor) may not let you have more than one device on at the same time. Therefore in this case, I'd share the Wireless adapter using Windows ICS (Windows Internet Connection Sharing). Basically it will turn your laptop into a simple NAT enabled router.
 

4 more replies
Relevance 41.82%

I have just gone on to Sky broadband today and I am quite ignorant on wireless connections.I have got it up and running using the ethernet connection.As I am running my PC on a fairly long phone extension(24feet),I wondered if I would gain speed by putting my router next to the master phone point at the other end of the room and using my wireless adaptor to make the "jump".

Answer:Ethernet or Wireless connection

I don't see how that would gain any speed whatsoever, even from a file sharing viewpoint (where the massive speed advantage of 10/100 or Gigabit Ethernet is obviously preferred to wi-fi). A good quality phone extension will suffer virtually no loss whatsoever, and certainly not enough to affect an average internet connection. I would happily take a long phone extension if it allows convenient Cat5 networking. A good 802.11g network will achieve c.15-30Mbits per sec, the Ethernet standards are self-explanatory, and even an ADSL Max internet service offers c.6-7Mbits at its absolute best. That's if you live next door to the exchange an happen to be the only person using it. So wi-fi versus Ethernet is not an arguement worth thinking about purely from a connection speed viewpoint. Therefore avoiding the extension will not have any gain.

2 more replies
Relevance 41.82%

In my office upstairs I have my broad band modem and two PC's and two printers. I would prefer to have these hard wired (ethernet) connected.

Down stairs I want to set up a PC for my wife via a wireless connection and I would also like to be able to use a lap to from the basement from time to time.

Can any one suggest a suitable configuration.

I have a friend with a similar set up who uses Net Gear DG632 and Net Gear WPN 824, but don't know if this is the best option.

Any help would be appreciated.
 

Answer:Ethernet and Wireless Combined

There's nothing wrong with your friend's configuration. One thing that I'd be thinking about, is the fast that you're going down two floors with the wireless signal. You might want to orient the antennas in a horizontal attitude to get more signal up and down, since the normal radiated pattern is like a bow-tie out the sides of a vertical antenna.
 

1 more replies
Relevance 41.82%

13 Minutes Ago
Dear all,

I have read all (i think) homegroup topics here but none solved my problem.
Homegroup is working perfectly when both computer are connected to router by ethernet cable.

As soon as i unplug the cable from computer 1. None of the computer is recognizing the homegroup of the other.

I tried rebooting both computers. Leaving homegroup, rebooting create new homegroup >> nothing helps.

Both computer get internet, can connect to the router, both computer can see and share folders with each other via the the network sharing way.

Both ethernet & wireless connection show up as HOME NETWORK

I have executed the Homegroup troubleshooter on both computers No changes.

Any clues on this?

Many thanks!

Fish

Answer:HomeGroup OK via ethernet but NOT via wireless

I believe homegroup is tied to the network connection. Did you create a homegroup for the wireless network connection?

7 more replies
Relevance 41.82%

So I've been googling this problem for hours now and I've finally given up and decided to ask for some help. My computer knowledge is pretty good but I'm not so great with all this internet stuff! I can connect to the internet through the cable but not wirelessly, despite it showing up as being available when I connect it tells me I have limited connectivity. Any help would be very appreciated, i ran a ipconfig and here are the results:

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Cameron>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Cameron-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : lan
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : lan
Description . . . . . . . . . . . : Broadcom 802.11b/g WLAN
Physical Address. . . . . . . . . : 00-1A-73-D1-54-E0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : lan
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. . . . . . . . . : 00-1B-24-DA-23-52
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Add... Read more

Answer:Wireless Not Working But Ethernet Does

8 more replies
Relevance 41.82%

Im sure this is something really simple but basically with my laptop i can connect to my router wirelessly fine but when connected via an ethernet cable web pages dont load although everything states its connected???
When you attempt to load a page the load bar starts to work in the bottom right hand corner to indicate its loading but doesnt go any further than halfway and never loads?
My security programme is ESET and have attempted disabling the personal firewall in the hope this may help but no joy.
Have tried another laptop connected up via ethernet cable and that laptop worked fine loading pages problem free??
To me this seems odd but could be relatively simple as it states connection, can be prooved to work fine on another laptop so it must be something on my laptop stopping it going any further??
Could anyone please lend some much needed advice pls? would be much appraciated
thanks
Paul
 

Answer:Can connect wireless but not via ethernet ?

Try these simple tests using the wired connection only with the wireless disconnected.
Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

In the command prompt window that opens, type type the following commands one at a time, followed by the Enter key:

NOTE: For the items below in red surrounded with < >, see comments below for the actual information content, they are value substitutions from the previous IPCONFIG command output! Do NOT type <computer_IP_address> into the command, that won't work. Also, the < and > in the text is to identify the parameters, they are also NOT used in the actual commands.

Do NOT include the <> either, they're just to identify the values for substitution.

IPCONFIG /ALL

PING <computer_IP_address>

PING <default_gateway_address>

PING <dns_servers>

PING 74.125.45.100

PING yahoo.com

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

<computer_IP_address> - The IP Address of your computer, obtained from the IPCONFIG command above. (For Vista/Win7, the IPv4 Address)

<default_gateway_address> - The IP address of the Default Gateway, obtained from the IPCONFIG command above.

<dns_servers> - The IP address of the first (or only) address for DNS Servers, obtained from the IPCONFIG command above.

If you are on a machine with no netw... Read more

1 more replies
Relevance 41.82%

I just bought a Canon MG 6450 All in one. Basic set up was OK. I used a Ethernet cable to connect it to my Netgear router - my principal use is with a desktop. I also have a wireless connected Laptop and an I pad. The manual is a bit sketchy but I would like to be able to continue to use the printer with wired connection to desktop but enable it to print from the Laptop or the iPad without the desktop switched on. I assume I have to install the printer CD onto the laptop and get the iPad app? If I set the printer to wi fi, does that disable the Ethernet connection? I do not have a formal network where files can bee seen from each device. It appears to have all the up to date functions except fax. The router gave me an option to set "Air print" , which I enabled, but what is that?

Answer:Wireless plus Ethernet printer set up

I assume I have to install the printer CD onto the laptop
and get the iPad app?

If I set the printer to wi fi, does that disable the Ethernet

yes
click here air print will allow your ipad to print wirelessly
No

10 more replies
Relevance 41.82%

What would be my best bet for a Wireless Ethernet Bridge? Where I can connect it to a wireless network then connect multiple wired clients up. I've purchased wireless bridges before but I understand that many Access Point/Routers can now be configured to act as a bridge? Many dedicated bridges are pretty pricey so this seems like a good route. The bridge will need to be fairly robust however as a lot of traffic will flow over it, so I'd like to hear from anyone who has successfully used a bridge like this with a fair amount of traffic.

I'm looking to basically connect two houses together onto one large network via a wireless bridge. Currently I have a client station connected to the other house and that client then has ICS running. I've had some success bridging the wireless and wired adapters to try to create more of a true bridge and allow 2-way regular network traffic but that disables the wireless controls on the wireless adapter. I would like a simpler hardware solution anyway.
 

Answer:What is my best bet for a Wireless Ethernet Bridge?

I have used the Ubiquiti products at several locations to do what you describe... Low cost, designed to be used outdoors & robust! Available in 2.4Ghz and 5Ghz as well..
http://www.ubnt.com/nanostationloco

I have not used their new MIMO product yet, but it could be better if you need more bandwidth..
http://www.ubnt.com/nanostationm

Joe...
 

2 more replies
Relevance 41.82%

I have a problem that my IP says is my Ethernet adapter... I have updated drivers, and tried just about everything, with no success.. My wireless speed is 117mbps/23mbps consistently.. However my direct to my modem Ethernet cable gets no better than 70mbps/22mbps consistently.. Any help would be greatly appreciated. I am running Windows 10 64bit...

Thanks

Answer:Ethernet is slower than wireless....

It might depend upon the computers and the Router, whether the Wired/Ethernet is 10/100 or 10/100/1000 [Gigabit]. Also the Wi-Fi may be 802.11b/g/n or 802.11ac [the latest]. I have a computer running the Insider Preview that needs a Gigabit NIC but the 10/100 is fine as it's not a production machine.

1 more replies
Relevance 41.82%

hi i just bought a new laptop with windows 7 os. i dont know why but my ethernet (MARVELL YUKON 88E8055 PCI-E GIGABIT ETHERNET CONTROLLER) connection speed is just about the same as my wireless (INTEL WIFI LINK 5100 AGN) i am so confused why my ethernet connection is so slow. With my older computers, ethernet was at least 2x faster...

Answer:Wireless and ethernet speeds are the same pls help

I'm afraid i don't know anythinge else about your setup.
Is the wireless router connected directly to the Ethernet router? are they combined? what are the brand and product names?
is this DSL, Cable, or Optical Fiber internet?

also, could it be that the other two computers were limited wirelessly to the speed of a WIfI G network, while both the router and the new computer are WiFi n compatible?

6 more replies
Relevance 41.82%

whenever i try to connect my laptop (windows 7) wirelessly , it does not connects to it where as the ehernet cable works fine with it. i am using beetle 450tc2 router. please help
 

Answer:my wireless not working but ethernet does

do any other devices work with your wireless ?
 

1 more replies
Relevance 41.82%

Hey,

I have been thinking about setting up a wireless webcam to show live streaming video of my hummingbird feeder or aquarium. The way I would like to set this up and to have it connected (preferrably wirelessly) to my router, and then be able access it through the internet either through FTP or perhaps some other way.

I read that FTP may not be able to support live streaming video because of the bandwidth involved. If that's true, I guess I could set up a desktop unit to act as a server, but would like to avoid that.

Has anyone out there tried this before? What camera did you use and what problems did you have?

I'm using a Linksys WRT54G router connected to a cable internet connected at 100 Mbps.

Any thoughts?
 

More replies
Relevance 41.82%

A friend brought over a computer for me to remove a virus, after checking out the computer found that the OS was hosed. So backed up data, and put a fresh istall of XP pro on the PC, legal copy not bootlegged. Couldn't get ethernet working, figured since he did have a several nasty viruses, I'd flash the BIOS, and right 0's to the drive just to make sure no nasties were still on the machine. All said and done, reinstalled XP Pro, on an Emachine T2862. Installed drivers. Installed a pci 3Com ethernet card, with the right drivers. No ethernet, cant get an IP, tried using a good static IP didn't conect to the internet, couldn't ping the router. Plugged in a Linksys wireless usb adapter, grabbed an IP right away. Tryied plugging the ethernet in, ethernets get IP's now, unplug usb and ethernet stops working. Plugged usb back in did all of the windows updates, including hardware. Tried Ethnet with the new drivers, still doesn't work. Tried Winsock fix, tried XP bat fix. Any other suggestions, I'm stuck.
 

Answer:New install no ethernet, but can get wireless

11 more replies
Relevance 41.82%

I'm using a 2nd computer in the same room to type out this post.
Both the wireless and ethernet are not working on my primary computer.
When plugged in with an ethernet cord, I get a limited connectivity sign,
and when using wireless, it shows that whenever I try to connect, it fails to connect as well as limited connectivity.
Before, it was working fine, but some viruses started to mess around with the internet and registry keys, but I believe I have cleared almost all of the malware, if not all of it.
The last time I was able to connect to the internet was May 20th, I've neglected this computer for a while, and now the antivirus programs (Malwarebytes, Comodo) are out of date.
When I look at the wireless or ethernet connection status, there are 0 packets coming in or out and the ip address it attempts to connect to is 169.254.53.220
I've attempted to reset the modem and router, and set a manual address for it to connect to, but none of that helped.
What more information should I post, and what should be my first step to solving this problem?

Side note: Also, I've finally managed to accrue some money since I have a job now, but I don't remember the moderator that helped me last time, any way I can find out who he/she was? I'd very much like to thank them with a donation.

Answer:Wireless and Ethernet not connecting

http://www.bleepingcomputer.com/forums/topic315561-30.htmlSince it appears to me that you never responded to the last questions from Myrti, I suggest that you send a PM to her...and then finish the topic above.In the interim, I am closing this thread to prevent any conflicts/confusion which might be caused.Louis

1 more replies
Relevance 41.82%

Hi guys,

In my office we have a windows server, 10 pc's and 3 printers. All devices are interconnected through a wired network. We have some business applications installed on the server and set up them to launch from client computers. As we are going to move to a new office space we have an intention to say goodbye to the wired network and make everything wireless. My question is will we be able to launch the programs which have being installed on server from client computers via wifi?

Thank you.
 

Answer:Transform Ethernet LAN in to a wireless LAN

8 more replies
Relevance 41.82%

I recently purchased an HP Pavillion Elite 441F computer. Upon starting it up, I discovered that although my wireless connection works perfectly, I cannot connect via an ethernet cable. I have tried multiple ethernet cables that I verified the connectivity of using my laptop. When I plug in an ethernet cable, the port shows a green light and an orange light below it. My computer recognizes that an ethernet cord has been plugged in, but shows the over the eternet box on the taskbar. All drivers are up-to-date.

Thoughts? I appreciate any help offered.
 

Answer:Wireless fine, Ethernet not so much...

9 more replies
Relevance 41.82%

I am unhappy with my current wireless network. i am useing a Belkin 54g Wireless Router, with a MSI USB Network adapter. I only have one computer at this time that is wireless, but I plan on adding a Xbox360 soon that will need to be run Wireless. My signal really fluctuates and I get random drops. I was thinking that if I get a Wireless Ethernet Bridge I could move It alot closer to the wireless router giving me better signal and less signal droppage. I was thinking of getting the Linksys WET54G but I am not 100% sure if this will help or do what I want it to, if i understand correctly I can hook it up to a network switch and all the computers/Xbox360 hooked up to the switch can use the Bridge, is this correct?
 

Answer:Should I get a Wireless Ethernet Bridge?

Provided you have a means of assigning IP to the devices, yes it should work.

A more cost effective and flexible method would be a wireless router (one that could be modded a-la WRT54G series et al) and mod it with a 3rd party firmware would give better results. This is what I did. I have 1 wireless AP connected to my LAN and for extra devices where I didnt want, or could not run cable, I use a WRT54GS modded with DD-WRT firmware and use the WRT to act as either a wireless client on my existing 802.11x network or use it as a WDS node if I want extended wireless coverage in a certain part of my home. The 802.11x network is acting as an AP where my IP assignments are handled via my linux box router.


The only reason I suggest a router instead of that bridge is the cost. Even out of the box, I believe you can make the latest version of the WRT54G's act as a wireless client and they are under $50 new versus this $90 piece of hardware which I think is a bit more limited functionally.

BOTH will accomplish what you want to do. The router method takes more work, but you will get more functionality (built-in switch, better radio) but the bridge is simpler.
 

4 more replies
Relevance 41.82%

Hey guys! I have a problem I can't seem to solve. My wireless connection stopped yesterday afternoon when I was downloading a TV show (maybe the dl changed some settings?). I can connect with the cable though! Any help would be appreciated!!

Thanks,
Bill
 

Answer:Ethernet works. Wireless does not...

16 more replies
Relevance 41.82%

I am lookin for some advice on a networking problem. I have a hp pc connected to the net thru an ethernet cable with a wirless router from talktalk and vista os. I have an advent laptop connected wireless to the same router. Both recieve and connect to the internet fine. My pc can find my laptop and transfer files from it thru public but my laptop does not recognise my pc nor the printer on it, any ideas as this is driving me mad.
 

Answer:wireless laptop and ethernet pc

You cannot see Vista PC in network on the laptop, correct.
What is the OS on the laptop?
Can you ping the PC from the laptop by IP and Name?
Do you have a password at sign on for laptop?
If Vista PC has "Password protected sharing" on, you will need to set up an account on it with laptop's User name and password.
What is the exact make/model of router?
Make/model of both compuetrs?
What firewalls are you using on both machines?
Have you tried connecting with the firewalls turned off?
 

1 more replies
Relevance 41.82%

My wireless was working fine... didn't touch anything and then it stopped.

My roommate can connect fine and I can connect with the ethernet cable.

I ran the Xirrus and it's not detecting any networks and i'm right next to the modem.

I did a system restore, ran a virus scan and no dice.

Any suggestions?
 

Answer:ethernet connection but not wireless

7 more replies
Relevance 41.82%

When I bring my laptop home, I plug in a Cat5 cable and boot it up. Windows 7 then hooks up to my router with both the cable and via wireless. When I then transfer files from it, they transfer at the lower wireless speeds. If I disable the wireless on the laptop, the transfer speed increases to Cat5 levels.

Is there some way to get it to use the wired connection instead of the wireless connection without having to disable the wireless adapter in Device Manager (which means I have to re-enable it when I take the laptop on the road again)?

Answer:Wireless vs Cat5 ethernet

When the eithernet cable is plugged in it takes over the wireless connection and only the wired connection is used. In other words it should be happening automatically as soon as you plug in the cable.

Quite a few have tested this including myself so unless your system is somehow different than everyone else's I can't imagine why you would be having this problem.

7 more replies
Relevance 41.82%

I was reading this thread on the steam forums and I know I have a realtek ethernet nic in my pc. I also have bad performance in tf2

My pc is connected to the internet through my wireless network though, which makes me think the above fix wouldn't work for me. Am I right, or does my wlan card interact with the realtek ethernet nic?

BTW, I'm posting here because most people on the steam forums don't seem to know what their talking about, at least when it comes to hardware.
 

Answer:Solved: Wireless through Ethernet NIC?

8 more replies
Relevance 41.82%

A friend brought over a computer for me to remove a virus, after checking out the computer found that the OS was hosed. So backed up data, and put a fresh istall of XP pro on the PC, legal copy not bootlegged. Couldn't get ethernet working, figured since he did have a several nasty viruses, I'd flash the BIOS, and right 0's to the drive just to make sure no nasties were still on the machine. All said and done, reinstalled XP Pro, on an Emachine T2862. Installed drivers. Installed a pci 3Com ethernet card, with the right drivers. No ethernet, cant get an IP, tried using a good static IP didn't conect to the internet, couldn't ping the router. Plugged in a Linksys wireless usb adapter, grabbed an IP right away. Tryied plugging the ethernet in, ethernets get IP's now, unplug usb and ethernet stops working. Plugged usb back in did all of the windows updates, including hardware. Tried Ethernet with the new drivers, still doesn't work. Tried Winsock fix, tried XP bat fix. Any other suggestions, I'm stuck.
 

Answer:New install no ethernet, but can get wireless

What patch level of XP are you using? If this is SP2, the classic WINSOCK patch is not correct.

TCP/IP stack repair options for use with Windows XP with SP2.

Start, Run, CMD to open a command prompt:

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reboot the machine.

Let's also see this:

Start, Run, CMD to open a command prompt:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

2 more replies
Relevance 41.82%

Hello all-

I am at my family's vacation home. For several years we have stuck to using dial-up here, part of the whole isolation thing you know, but recently decided to upgrade to the most basic DSL. I set up the connection and connected the modem (Lynx L-220) to a wireless-b router (Linksys BEFW11S4) and everything was working great for about, oh, maybe an hour. It started getting unbearably slow, worse than dial-up. So I connected to the router with an ethernet cable and it's fine, most of the time. I then disconnected the ethernet and surfed wirelessly, and it was also fine. So the wireless only would work properly if I had just used the ethernet. ?????????? That's odd.......

I tried pinging a few sites on ethernet and wireless to see what happened. I opened Firefox, tried loading a page (of course it wouldn't) and then typed ping www.google.com in command prompt. It timed out a few times, then get a reply and, low and behold, the page suddenly started loading. Now I'm really confused. The internet works sometimes, the wireless works sometimes, and the ethernet works sometimes. ?????

I'm certainly planning to call tech support, but as that is a big thing to attempt, I thought I'd post here first and see if there is anyone out there who perhaps can help me.

OMG OMG OMG

Edit: I have tried pinging and loading pages only connected to the modem as well. It still doesn't work properly. I guess it's not the routers problem, maybe ... Read more

Answer:Wireless fast only after using ethernet...

16 more replies
Relevance 41.82%

Hello I have been having a problem with my ethernet work but wireless not. It basically says acquiring IP address then says limited connectivity. Im using a Dell Vostro 1520 laptop and a dlink router. Thanks for your help.
 

Answer:Ethernet works but wireless does not

Check.
You have no conflicting wireless managers installed try using only the Windows built in tool
Remove any unneeded wireless networks from your system.
Remove and re add your network back in, ensure all settings are configured correctly. Connect firstly with the cable and note down everything exactly. i.e. SSID, Security type, encryption type, security key.
If it still dosent work look into updating or rolling back the drivers for your wireless card.
 

1 more replies
Relevance 41.82%

Hi - I just bought a notebook with built-in wireless mobility. I have Road Runner as my ISP on my desktop unit. Is there any other equipment I need for sharing my Internet connection with my notebook?
 

Answer:Wireless notebook & ethernet

6 more replies
Relevance 41.82%

Hello,I am currently having issues with connecting to the internet. I am using a T60, machine type: 2623 D6U and running Windows XP. Yesterday, I updated my Thinkvantage software, then immediately performed a backup of my computer using the Thinkvantage software.  After that, I tried to use the wifi and it would not even search for any surrounding networks. I then plugged in an Ethernet cable and again it would not connect. I have tried downloading driver after driver, but nothing will work. I meant to uninstall wireless card and then install it again after reboot. I rebooted and was able to get wireless through Windows network connection, but not thinkvantage. I checked device manager and my Ethernet network was gone, so I may have accidentally uninstalled that instead. I rebooted again and when went back to device manager, the Ethernet was back. Once I found out wireless was working I tried a Thinkvantage System update again, and noticed I could update my Ethernet. I clicked to download and install and an error came up with "was not able to download package" or something very similar.  So currently, I have wireless available through Windows, but not thinkvantage and no Ethernet is working.  Any suggestions on how I can get this working properly again? Network cards in device manager: Intel(R) PRO/1000 PL Network ConnectionIntel(R) PRO/Wireless 3945ABG Network Connection Thanks for your help! 

Answer:Wireless and Ethernet Issues T60

Hi there, Make sure you have this 4 drivers and software extracted to the drivers folder. 1) Thinkpad Power Management driver ( current version 1.60 )2) Intel WIFI driver ( current version 13 )3) Lenovo Access Connection software ( current version 5.5 )4) Lenovo Hotkey features ( current version 2.23 ) You can get them herehttp://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62928 Sequence:Uninstallation 1) Uninstall Thinkvantage Access connection - do not reboot2) Uninstall Intel WIFI sofware from Control panel> Add/Remove Programs3) Reboot the Thinkpad and make sure that the Wireless card remains as an unknown driver in device manager Installation 1) Install Thinkpad Power Management driver - reboot2) Install Intel WIFI Driver - no reboot required3) Install Thinkvantage Access Connection software - reboot By now the WIFI issue should be resolved4) Install Lenovo Hotkey feature to compliment the Access Connection software - reboot CheersProcom 

3 more replies
Relevance 41.82%

My Operating system crashed yesterday and I had to reinstall it, thus deleting everything off of my computer, including my configuration for wireless internet.

I installed the wireless adapter (Netgear WG111v2) like I was supposed to, I put the most up-to-date drivers for my computer to use the adapter as well as for the adapter to operate. It detects signals just fine, but when I put in my network's WPA passcode, my adapter gets stuck in this loop of "acquiring network address" and then dropping it and "acquiring network address" again. This baffles me because the code has worked on other machines.

Then, when I tried to connect my computer via ethernet cable, not only would my computer not connect to the internet, it's not even showing ethernet connection as an option in my Network Connections.

I really have no idea what to do at this point. Can anyone help me with this?
 

Answer:Can't connect to wireless or ethernet

8 more replies
Relevance 41.82%

I have 3 PC's (2 on XP and 1 on ME) and a laptop on XP. I am using a Linksys WRT54G Wireless router. The laptop is wireless. PC's are ethernet. All computers communicate with each other in common workgroup when I use an ethernet cable for the laptop. When I use wireless for the laptop, workgroup communication is lost with other machines. No porblems accessing internet with any machine, whether wired or wireless.

Suggestions?
 

Answer:Wireless and Ethernet in Same Workgroup

13 more replies
Relevance 41.82%

I have an Acer Aspire 7552G laptop running Windows 7 x64 that is having problems with connecting to the internet.

I started to notice the wireless and LAN connections becoming very weak, web pages would load slower, data would take longer to download, etc. This lasted for a couple weeks. As of now, I cannot get any signal, neither wireless nor LAN.

I normally use Google Chrome but have tried to connect through multiple browsers.

I have tried updating the wireless/ethernet drivers, and I have also tried uninstalling them all together and reinstalling them. Both to no avail. I have no idea how to resolve this issue and am hoping the tech pros here can help me out!

Wireless LAN and LAN vendors are both Broadcom and the drivers can be found here: Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 7552G


*I am connecting to internet on a university campus.

Answer:Wireless & Ethernet LAN - Not Working?

How are you measureing the stregth of the ethernet connection?

Who is your ISP ?. . What Brand and Model is the Modem and Router?


Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Remove all the stored wireless network profiles and search for the network again.

How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7

Then: check your browser's settings, remove any proxy settings if found here's how.

Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type type the following command: IPCONFIG /ALL


Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

Right click in the command window and choose Select All, then hit Enter. Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

then please Download and run this Xirrus Wi-Fi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you get an error abo... Read more

16 more replies
Relevance 41.82%

(Before i start, i have checked multiple threads on this site about my problem but none atm have seemed to work, im sorry if this topic arrises constantly but i have done a search but my problem still presists.)

Hi,

My problem has been going on roughly since i aquired the laptop but im sure that it isn't a hardware fault as it is both the ethernet and wireless adapter having problems.

My ethernet will disconnect usually once or twice a day usually an hour after the laptop has been turned on. After that it won't disconnect again.
The wireless internet will disconnect more often and it is random as to when it will happen.

The disconnection happens like this,
Unable to browse the web using any internet browser like firefox or internet explorer
Any online game i play kicks me from the server to a login screen (if the game has one)
However, the laptop still shows a stable connection to the ethernet/wireless. It will show the yellow triangle with an exclamation mark for a second then show a stabe connection.

Laptop Specs;

Windows 7 64-bit
AMD Athlon II Dual-core M320 2.1 GHz
4GB RAM
Wireless Adapter - Atheros AR9285
Ethernet Adapter - Realtek PCIe FE Family Controller

So far i have tried;

Updating all devices,
Uninstalled the devices and re-installed,
Unistalled Anti-virus software,
Disabled Firewalls,
Changing Channels on the router,
Update Router firmware,
Reseting the router.

Thanks for taking your time to read the above and thanks for any help that you can ... Read more

Answer:Ethernet/Wireless Disconnecting.

This is the listing of errors in your event log (from DDS that I asked you to run)

04/08/2010 13:03:31, Error: Service Control Manager [7031] - The Apple Mobile Device service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
04/08/2010 12:52:38, Error: Service Control Manager [7026] - The following boot-start or system-start driver(s) failed to load: StarOpen
04/08/2010 12:52:25, Error: atikmdag [52236] - CPLIB :: General - Invalid Parameter
04/08/2010 12:52:17, Error: Application Popup [1060] - \SystemRoot\SysWow64\Drivers\StarOpen.SYS has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.
04/08/2010 11:58:33, Error: Service Control Manager [7001] - The Computer Browser service depends on the Server service which failed to start because of the following error: The dependency service or group failed to start.
04/08/2010 11:58:32, Error: Service Control Manager [7001] - The HomeGroup Provider service depends on the Function Discovery Provider Host service which failed to start because of the following error: The dependency service or group failed to start.
04/08/2010 11:58:32, Error: Microsoft-Windows-DistributedCOM [10005] - DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server: {9E175B6D-F52A-11D8-B9A5-5050... Read more

9 more replies
Relevance 41.82%

My old Westell DSL modem died, and Verizon sent me an Actiontec model GT704WG. I have two desktops, both connected to the modem by ethernet cable, and a laptop, which uses the wireless capability of the modem. This worked fine with the old modem (until it died). I connected the cables to the new modem exactly as they were connected to the old modem. I'm now browsing happily on the laptop (i.e., wirelessly), but the desktops cannot connect to the Internet. Strangely, when I go to 192.168.1.1 on one of the desktops, I get the setup page for the old modem rather than for the new one, even though the old modem is now sitting in a box. The status of the lights on the modem is as follows:

power - green
DSL - green
Internet - green
ethernet - not lit (all four of them)
USB - not lit
wireless - green

All computers are running Windows XP, SP-2.

How could wireless be working, but not ethernet? Usually it's the other way around!

Do I, perhaps, have to connect the modem to one of the desktops by USB cable? My understanding is that it's not necessary. If it is, do I need a driver from Verizon? They did not send a CD with the new modem. Is the driver available on the Internet somewhere?

Thank you!!
 

Answer:Solved: wireless OK, but no ethernet

ethernet - not lit (all four of them)Click to expand...

I take that to mean the ethernet ports are bad (have you tried them all?) or the cables are bad.

This may be the correct user manual: http://business.verizon.net/Help/dsl/Default.aspx?case=c13947

Try the USB port unless your computers are:

"Note: USB LAN port is not supported with Microsoft Windows
NT 4.0, Windows Vista 64-bit, or Mac OS."

That unit is a modem/router combo. The USB port is not to the modem part; it is a special LAN port, so no driver or special software should be needed.
 

3 more replies
Relevance 41.82%

Yesterday, due to an additional guest to our house, I had to up and move all of my possessions into another floor and section of my house. I have only one wireless device, and that is laptop. Other than that, I have

Desktop PC (windows 7)
Xbox 360
and a HP C5100 series printer
that all require an ethernet connection to my router... which is back on the other side of the house. I cannot snake a 60 foot ethernet cord to each of these devices. My router is an Apple Extreme bought less than 6 months ago.

How do I give my network devices internet access from across the house? Is there some wireless hub I can buy that translates wireless internet back through ethernet cords that I can set up over this side of my home?

Any questions for specification please ask. Thanks in advance

PS - If I buy a wireless card for my desktop PC, only a year old, would I be able to use that as a router in and of itself? It has extra ethernet ports on the back, so could I hook up my Xbox 360 to it and get network access for my Xbox or printer? Are there any steps to do that?

Answer:Wireless and Ethernet solutions

Hello and welcome to the forums.

There are many ways of accomplishing this, personally I solved this problem by employing an Ethernet over mains power solution using this; I find that it is almost completely reliable and you can easily stick a 4 port ethernet hub on the other end for all your devices (some of the more expensive versions have a hub built in).

It works by taking your ethernet signal and sending it through your houses power cabling and then receiving that signal at any socket in your house.

There are other options but personally I think this is one of the best.
In answer to your question about your WLAN Card being used as a router then the answer is yes.

You can set it up as an ad hoc network on any version of Windows or if you are running Windows Seven you can use this nice little program called Connectify which accomplishes the same thing but is much more versatile and easier to manage.

I hope this answers your questions.

Oli

3 more replies
Relevance 41.82%

I have a Dlink Dir-655 Wireless Router. The two recommend cards are the DWA-552 and DWA-556. I wanted to know if I should go with any of these or another brand. Basically I want to know what would be a good wireless card to get for the Dir-655 router.

Also how do USB wireless card compare, is there a big performance difference?

Thanks
 

Answer:Wireless Ethernet Card?

Check out this setup.

http://www.bplustech.com/adapter/MP2W_6200.html
 

12 more replies
Relevance 41.82%

hi...i have a macbook and a pc.....and i have subscribed in 2 internet isps. one of them is just wireless network and the other one is DSL ....i was wondering is it possible to use both of them in my mac at the same time and reffer some of applications to one and others to otherone?
 

Answer:use wireless & ethernet in mac in the same time

This thread, post #17 for Windows. Don't know if it would work for Mac.
http://forums.techguy.org/networking/849382-solved-how-do-i-specify-2.html
 

2 more replies
Relevance 41.82%

I'm currently using 2 different isp's one wireless and the other ethernet trying to use them both at the same time to download or browse making them work together is this even possible?

thanks
 

Answer:Wireless/ethernet question

Yes, it is. . . You would at the very least need a "Dual WAN" router to handle the distributing the bandwidth. Then once you have a router that can handle it you can look into the pro's and con's of the different methods of spreading the bandwidth around.
 

2 more replies
Relevance 41.82%

Just built a computer and trying to get a wireless card that will work with Windows x64. Any hints, tips or advice? I have purchased 2 and they did not work with x64. Please help!
 

More replies