Computer Support Forum

error code 0x80072ee2

Question: error code 0x80072ee2

Ever time I try to open the store, I'm getting error code 0x80072ee2.
I went to Microsoft support, and they suggested Windowsupdatediagnostic to fix this.
When I ran that it gave me Service Registration missing or corrupt. (see image)
Is there a way to fix the Service Registration.

Win 10 Pro th2 10586
Asus Essentio 12 GB ram
AMD A8-5500 with Radeon HD Graphics 3.2 GHz

I just updated to build th2 10586 2 days ago. Build 10565 didn't have this problem.

Relevance 100%
Preferred Solution: error code 0x80072ee2

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: error code 0x80072ee2

Turns out my internet provider was having problems, not my pc.
Error code is gone, and Service Registration is not corrupt or missing.
Thanks anyways.

1 more replies
Relevance 82.41%

connected DG834G NETGEAR router to pc + laptopgetting above update messageany help appreaciatedthanks

Answer:microsoft update error code 0x80072EE2

click here

3 more replies
Relevance 81.59%
Answer:I'm having trouble with the windows 10 upgrade. I get error code 0x80072ee2

What device are you trying to install this on? Phone? Tablet? PC?

more replies
Relevance 68.88%

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Status: Validation unsupported OS
Validation Code: 6
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-DKB77-7M9GH-8HVX7
Windows Product Key Hash: LVfmE2BrV36Gw1iwVgO5ouTh5Gk=
Windows Product ID: 00326-10000-00000-AA576
Windows Product ID Type: 0
Windows License Type: Unknown
Windows OS version: N/A, hr=0x8007007a
ID: {9B026407-DE5A-4FF8-BA9C-4062D6C90179}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 10 Home
Architecture: 0x00000009
Build lab: 10240.th1.150819-1946
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 111 Unsupported OS
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics:

Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compati... Read more

More replies
Relevance 68.88%

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Status: Validation unsupported OS
Validation Code: 6
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-DKB77-7M9GH-8HVX7
Windows Product Key Hash: LVfmE2BrV36Gw1iwVgO5ouTh5Gk=
Windows Product ID: 00326-10000-00000-AA576
Windows Product ID Type: 0
Windows License Type: Unknown
Windows OS version: N/A, hr=0x8007007a
ID: {9B026407-DE5A-4FF8-BA9C-4062D6C90179}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 10 Home
Architecture: 0x00000009
Build lab: 10240.th1.150819-1946
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 111 Unsupported OS
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics:

Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compati... Read more

More replies
Relevance 64.78%

Try this link: http://support.microsoft.com/kb/836941
 

More replies
Relevance 62.73%
Question: Error 0x80072EE2

Error 0x80072EE2Windows XP Athlon 2.4 IGb mem.The computer is running fine since a complete reinstall. Decided to reinstall Defender and this error appeared. I get the same error when visiting the Microsoft site. Any help to solve this problem would be welcome.

Answer:Error 0x80072EE2

As always, Google is your friend click here=

1 more replies
Relevance 62.73%
Question: 0x80072EE2 error

When I try to update at "Windows Update".
I get the 0x80072EE2 error.
When I follow the instructions for correcting this error, I go through steps 1&2
but still cannot resolve the problem.
At step3 I am told to "Double-check the Proxy/Firewall" settings.
I have Sygate Personal Firewall as a firewall and I don't know how to
add the urls to the exception list that step3 asks for.
Can someone help?
 

Answer:0x80072EE2 error

11 more replies
Relevance 62.73%
Question: Error 0x80072ee2

Hi,

It's has been two weeks or more that I can't do Windows Update on Windows 7 SP1 machines (Windows Server 2008 R2 too).
What happens: fresh new install (no matter where... Virtual Machine, Desktop, Notebook) of Windows 7 Service Pack 1 64 bits.
I try to look for updates and it keeps searching for a long time... Then it returns the 0x80072ee2 error.
Sometimes the error 0x80244010 appears too.
So I tried this today:

Fresh installed Windows 7 Service Pack 1Installed this updates manually (in this order):

kmdf-1.11-Win-6.1-x64.msuUmdf-1.11-Win-6.1-x64.msuWindows6.1-KB2604115-x64.msuWindows6.1-KB2900986-x64.msuWindows6.1-KB2937610-x64.msuWindows6.1-KB3031432-x64.msuWindows6.1-KB3033929-x64.msuWindows6.1-KB3068708-x64.msuWindows6.1-KB3080149-x64.msuWindows6.1-KB3126587-x64.msuWindows6.1-KB3126593-x64.msuWindows6.1-KB3140410-x64.msu<Reboot>Internet Explorer 11 7 x64 BR.exe<Reboot>Windows-KB890830-x64-V5.34.exedotNet framework 4.6.1 x86-x64.exeWindowsUpdateAgent-7.6-x64.exe<Reboot>
Then tried to look for updates... Error 0x80244010Tried to search again and it took ~ 1 hour and 30 to show 204 updates to install.
Trying now to install 40 updates at a time to see if I'm able to deliver the machine fully updated.
Tried to do the same thing on a notebook.... and the error 0x80072ee2 keeps on appearing.
Posted this on Technet WSUS forum (yes, we are having the same problem at work), answer.microsoft.com and no one seems to care.
It's been a real pain ... Read more

More replies
Relevance 61.91%

When I try to activate I get error code 0x80072EE2. This is the second time I have installed Windows 7. The first time I kept getting the same errors with activation and Windows update. Im running 64 bitwith an E6400 on an Intel DG965WH board. I have Vista on the same hard drive, but I installed 7 as fresh install on a separate partition.

Answer:Activation Error 0x80072EE2

Here is the Microsoft knowledge base for your error. Hopefully, it can provide some guidance.
http://support.microsoft.com/default.aspx/kb/836941

4 more replies
Relevance 61.91%

The Guided Help program that Fabu recommended would have worked perfectly, but.......... Once in the host file there was no listing for microsoft updates or windows updates websites at all.....no IP numbers, no listings, nothing to add the # to. There was information there, just not those particular pieces.

Answer:0x80072ee2 Error Unresolved

May I suggest keeping your posts in the same thread. Just answer your original post. When you go to the update site, does a pop-up bar at the top of the page saying click here to install active-x control?2 sites to read up onhttp://support.microsoft.com/kb/822798http://support.microsoft.com/kb/943144When all else fails:Dial-a-fixRemember to flush software distribution folder

2 more replies
Relevance 61.09%

Hi,
I've been trying to download SP2 (from the official Microsoft website, using Update) but it never works. I always get the same error mesasage:
Error No. 0x80072EE2

None of the given links are helpful in solving the problems.

Also I tried in frustration purchasing the SP2 installation CD, but had problems sending in my order!


*for extra information about the current condition of my computer, here is the link to my other thread: http://www.techsupportforum.com/secu...ing-etc-2.html

I have also gone to the link provided by Ried (http://www.updatexp.com/0x8007007E.html) and gone through each step provided on that site, but none of it has worked (no matter if I choose Express or Custom in the Windows Updates page.)

Anyone know what I can do now so I can download and install XP SP2? (and YES I have read the important thread about SP2 on here... I don't have TV Media on my computer)

Answer:can't download/install SP2 - Error No. 0x80072EE2

Hi,

Take a look at this page from the MSKB: http://support.microsoft.com/kb/836941

The steps are mostly the same, but you might want to give the Guided Help program a shot.

Note at the bottom it says to make sure you have the latest Background Intelligent Transfer Service installed. You can get the latest here: http://support.microsoft.com/kb/842773

15 more replies
Relevance 60.68%

Tried all the microsoft methods (about 3 times) to repair this error code, all to no avail. Please advise me on what to do so that I may receive automatic updates and updates for windows defender. I'm on a home computer running xp pro with a direct connection to the internet, no proxy. Checked Services pertaining to this seem to all be on unless I'm missing something. The only firewall is the microsoft firewall. Tried turning it off and still cannot access updates. Did an ipconfig /flushdns. What am I missing? Your help would be greatly appreciated.:confused
 

Answer:Can't get updates for xp pro or windows defender error 0x80072ee2

Hi

What service pack are you at with XP?

Are you connecting via a router to the internet or directly through a modem, if so what models?
At times the MTU setting of the modems can cause WU issues so access your modem/routers panel and change the MTU to 1492


Could try re-registering the components to WU, click start > run and type each one at a time.

net stop wuauserv

regsvr32 wuapi.dll
regsvr32 wups.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wuweb.dll
regsvr32 MSXML3.dll
regsvr32 qmgr.dll
regsvr32 qmgrprxy.dll
regsvr32 jscript.dll

net start wuauserv
 

1 more replies
Relevance 59.86%

Anyone else has this error ?
I'm on the build 10 130 and I can't upgrade to 10162.

More replies
Relevance 57.4%

Finished updating laptop to 8.1. Now can't open store. Says"We weren't able to connect to the store. This might have happened because of a server problem or the network connection timed out. Please wait a few minutes and try again. 0x80072EE2"
I've tried multiple times, run windows update troubleshooter and app troubleshooter. No joy. App fixer says I can't connect because I need a Microsoft account. Which I have and am signed into.


Have a web connection because HP Support Assistant and explorer can connect. How do I fix this?

More replies
Relevance 50.02%

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

More replies
Relevance 49.2%

I have a new Toshiba L550 1C8 computer with Windows 7 64-bit.

The problem is, that I can?t burn my files on my preinstalled PIONEER DVD-RW DVRTD09A DVD-drive !

If I right-click the file and choose ?Send to E:DVD-drive? I got the error code 0X8007045D.

If I use the preinstalled Toshiba Disc Creator I got the error code 380136-24-00000000.

What?s wrong.


Ole.

Answer:Satellite L550-1C8: error code 0X8007045D and error code 380136-24-00000000

Hi,

Try removing the upper and lower filters to restore functionality.

Instructions: http://support.microsoft.com/kb/982116

2 more replies
Relevance 49.2%

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

Answer:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

3 more replies
Relevance 48.38%

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

Answer:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

1 more replies
Relevance 47.97%

i got windows 8.1 yesterday and installed on my pc(previously running win7), after a fresh install of win 8.1, i checked for upates and found over 1GB of updates and installed it.

before the update my pc was running well including the store, but after the update store is not working any more, it stuck with the spinning wheel and then throws an error:



i have tried almost every method to resolve this. here is a list of what i tried so far:

1. re-connecting my MS account
2. restarting pc
3. using cmd and tried some command found on this site
4. creating local account and the disconnecting the old one,
5. ms diagnostic tool,

also it detected that my graphics driver is out of date!! i am sure my drivers are updated.
almost none of the solution i tried didn't resolve my problem. Is there anything i am doing wrong!

Any help would be appreciated.

Answer:Store not working 0x80072ee2

it seems the problem was my tp link wireless router!!!

1 more replies
Relevance 47.97%

not having much look 2day,this is what it says when trying windows update.

Answer:update shows 0x80072EE2

click here

4 more replies
Relevance 47.56%

Hi,

I am having problems with Windows Update on some, but not all, of
the computers on my home network. All are running Windows 7
(combination of Home Premium and Ultimate).

Two of the PC's have not been able connect to Windows Update since the
start of July. Both are connected to the network through Ethernet.

The error code I am getting on both PCs is 0x80072EE2, which indicates
ERROR_INTERNET_TIMEOUT. However, this has been persistent for weeks
on these two PC's, but does not affect other PC's on the same network.

e.g. I have another wired PC that is not experiencing
problems. Two laptops that also run Windows 7 can connect
wirelessly to Windows Update.

I run a Linux PC as a firewall/NAT/Squid box with my home network
behind it. Squid was enabled relatively recently, so I tried
reverting to a no-Squid configuration (NAT/ufw only) which has been
working correctly for years, but the problem on the 2 PCs persist.

The two PC's with Windows Update problems happened to be in the same room
on the same switch, so I initially suspected networking cable/router/switch
issues. But moving one of the nonworking PC's to another room,
using a different switch and cable, next to a PC that has working
Windows Update. With the PC's side by side, one is able to connect
to Windows Update, one is not. Which seems to me to rule out a
general networking/routing issue.

The two problem PCs do not otherwise have any apparent issues
accessing the Intern... Read more

Answer:0x80072ee2 for weeks on some PCs while others on same network are fine

Strangest of all is that this appears to have persisted through a repair install.
The version number for wuapp.exe is one that was only released at the beginning of the month - so should have been reverted during the repair - although I suppose it's possible that the system did manage to update it afterwards.

Please open an Elevated Command Prompt, and run the following commands


Code:

REG QUERY HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\WUStatusServer
REG QUERY HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\WUServer
REG QUERY HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate /S

.
post the results

6 more replies
Relevance 47.15%

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.













Solved!

Go to Solution.

Answer:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

3 more replies
Relevance 47.15%

This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I couldn't install or uninstall anything. I would get an error: This application was unable to start correctly. With error message (0xC0000006)

Now trying to repair Windows 7 with the upgrade option I get:
Windows was unable to create a required installation folder. Please reconfigure your boot.wim to use the flag 9 settings for the first image and restart your installation. Error Code: 0x803002f

Any help greatly appreciated....

Answer:Started with error code 0xC0000006 and now I have Error Code: 0x803002

You may need to attempt SFC up to 3 times to repair damaged System Files. But first disinfect per Troubleshooting Steps for Windows 7. If there is any problem go with the bootable scans in Troubleshooting Windows 7 Failure to Start as the OS may be in the death grip of infection.

Then SFC may run better from the Win7 installation media or System Repair Disk Command Line: SFC /SCANNOW Run in Command Prompt at Boot.

If these fail then you can try the Repair Install after establishing a Clean Boot per Troubleshooting Steps for Windows 7.

But you may be better off copying out your files to quarantine to follow these same steps for a perfect Clean Reinstall - Factory OEM Windows 7 which compiles everything that works best in tens of thousands of installs we've helped with here.

1 more replies
Relevance 47.15%

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.










Solved!
Go to Solution.

Answer:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

3 more replies
Relevance 47.15%

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

More replies
Relevance 47.15%

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.
Thanks,
Miket797

Answer:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

2 more replies
Relevance 46.74%

Back in November, Windows Update inexplicably stopped working. After several weeks of diagnosis (including a reformat/reinstall of Windows), it seems that IPv6 is the culprit - it seems that my ISP recently rolled out IPv6 secretly. Unchecking the IPv6 checkbox on the network adapter finally solved the problem.

Now the question is, why does the addition of IPv6 break Windows Update? I mean, IPv4 is still there...

More replies
Relevance 45.1%

 Product Name: HP ENVY 15-j059nr Quad Edition Notebook PCOperating System: Microsoft Windows 10 (64-bit)Excused me!I have forgotten my ENVY 15's BIOS administrator password.This is the code it shows after 3 times of typing the wrong password:18874377 Could you give me the reset code for this, please?Thanks in advanced.

More replies
Relevance 45.1%

Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much for your time.

Just an update a new bsod happened while running the repair option on league of legends.

Answer:BSOD PLaying League of Legends error code 0x0000001e a common code

Hi,

Your Nividia drivers and Nforce networking drivers are causing issues, also some USB issues.


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80002e80b05, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KMODE_EXCEPTION_NOT_HANDLED (1e)
Driver Issues:


Code:

Driver: nvlddmkm.sys
Dated: Fri Jun 21 10:06:16 2013
Refers to: Nvidia video drivers.
As you have the latest driver installed, I would suggest Rolling back to the previous version.
If that does not fix the issue, then you may try this newer BETA version


C... Read more

9 more replies
Relevance 45.1%

After poking around on other threads, there's a chance this is related to the hardware drivers. However, I wasn't able to find a thread with this exact error code, so any help on what this means and how to correct it would be appreciated thanks! This is generating on a LENOVO ideapad Y700 series laptop (15 inch).













Solved!

Go to Solution.

Answer:ERROR CODE AFTER A HARDWARE SCAN, RESULT CODE: WVC007002-UM7YSI

Update your Intel Video driver and the false error from LSC should disappear.WVC007002-UM7YSIw=windowsvc=video cardtest 007result code 002um7ysi is a hash code of the serial number of your machine and useless info<unless you chose to send feeback info to Lenovo

1 more replies
Relevance 45.1%

Greetings, I need help solving the error codes below. Thank you

Product: Windows Defender -- Error 1923. Service 'Windows Defender' (WinDefend) could not be installed. Verify that you have sufficient privileges to install system services.

Product: Microsoft Office Enterprise 2007 - Update 'Security Update for Microsoft Office Word 2007 (KB2251419)' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\user\LOCALS~1\Temp\MSIfb8e4.LOG.

I hope I have provide useful information to get your help.

Sincerely

Answer:Error code 1923 and Error code 1603

hi, got a questions for ya. have you uninstalled any virus protection software lately? the reason i ask it might of left remnants behind if you did not use the removal tool.

1 more replies
Relevance 45.1%

Hi guys, first time posting so apologies in advance if I do something illegal. As far as I can gather, I should be posting in the right forum. I've been having system stability problems for the last week or so. I think it might be because of a mass driver update across my system since nothing else seems to be the cause.

Basically, I updated some drivers bout a week ago and now the PC either hangs or auto-restart when I'm playing games. At first I thought it might be due to OC instability, so I reset my bios to default settings. Didn't quite work out completely as the system still exhibits the "sudden death" during gaming.

Have tried the steps in the sticky above on refreshing the page file. defragging etc. Problem still hasn't gone away. All rams have cleared 7 cycles of memtest at 2.65 volts and 2.6 volts without problems, though everything has been reset to stock already.

My system specs are as follows :
AMD 64X2 4200+
MSI K8N Neo 4 Platinum
2 x 512mb Kingston CH5 PC3200 DDR
2 x 512mb Mushkin Black Line BH5 DDR
Inno 6600GT 128mb
Creative Audugy ZS Platinum
BenQ 1640
Gigabyte CD-RW
Hitachi/IBM 80GB SATA II
Western Digital 240GB SATA HD
Verudium Vortex 430W

Am fairly sure its not a power issue and the core temp never exceeds 49 degrees even at full load. Its about 44/45 idle. Am guessing it might be the soundcard though... Anyone able to help?

Would be most grateful for any assistance and thanks in advance.
... Read more

Answer:system error code Error code 100000d1

Looks like NV4mini.sys is the Nvidia faulting driver... Your Inno 6800GT drivers are at fault
 

4 more replies
Relevance 45.1%

Hi,can you please help me solve this problem? I've been having problems with my internet connection (works fine on other devices). It takes a lot of time to get started with the connection - it's very slow in the beginning... Thank you!! 

Answer:Lenovo B50-70 hardware scan shows this error code - Result code: WWF00F008-HK0X2L

Hi MacKapu ,
 
Welcome to Lenovo Community.
 
The error code does match possible issue with the Wifi  based on code Windows: Wifi:00F(test)008(result) 
 
Such code thou would be best interpreted by Lenovo tech support team using their tool and your Serial number.
 
It would be best to give them a call for the code 008 (WWF00F008-HK0X2L) result and likewise would be able to advise how to proceed just in case that the WLAN card itself have hardware issue based on the test. 
 
Especially if you have already tried uninstalling and reinstaling drivers for the WLAN card , maximize performance by turning off power management WLAN property and setting to highest on roaming tendency  or even doing complete factory reset aka OKR (everything wiped out but restored to out of the box setting )  . 
 
Note:  
highlights to link  available for further reference
 
Please get back to us on how things would go . 
 
Regards ,

1 more replies
Relevance 45.1%

I am having the typical black screen. I just want to see if anyone has a resolution to the problem before I have to spend money for a new one. I checked everywhere before I posted for help.

Thanks in advanced. Joe D.

More replies
Relevance 45.1%

Hi,

Could anyone tell me if there is an updated driver for the TSSTcorp CDDVDW TS-L632H ATA Device? The device is not available as a selectable drive and in device manager it reports the following error:

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

I have removed the device and the driver, however on scanning for hardware; vista re-installs the default driver and the same error returns.

Because of this error, I am unable to update the firmware for the drive and the firmware update is unable to see the drive.

Any ideas??

Thanks in advance.

Answer:CD/DVD drive issue on Satellite L notebook - error code Code 39

Hi buddy

What to say?this issue is known and caused by wrong Windows registry entries.
Microsoft has released and published some knowledge articles.

Check this:
http://support.microsoft.com/kb/270008/en-us

First of all I recommend removing the CD/DVD drive from the device list in device manager. Then remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

Finally reboot the notebook.

That?s all.

PS: you would find this solution also without my help?. You should use the forum search function! It?s helpful!

5 more replies
Relevance 45.1%

I have a HP 522c AMD Athlon 2000+, running windows xp. There is an integrated video card that went bad. So in installed an AGP video card it is a 3D Prophet 4000XT 32 MB. Now that the card is installed when I have it activated there is a code 12 on one of the pci to pci bridges so that my network card in the other pci slots will not work. I have tried the network card on other computers and it works fine, i have also tried the video card and it works fine. I also tried other items in the pci slots while the agp card is in(modem, sound card) and i still recieve the same error. The card works when a pci bridge is enabled but only with the VGAsave driver and with very low quality. When i check the device manager while both pci to pci bridges are enabled, when i can only run the VGAsave driver, it says the there is a conflict under the I/O range with the VGAsave and an Pci to Pci bridge. Any windows updates just delets the pci to pci bridge listed in the device manager. And i have tried all the drivers i could from AMD, HP, Hercules. Any help would be welcomed on how to fix this.
 

Answer:Code 12 in xp on a Pci to Pci bridge, Recieve a code 12 error with video card

your hp box is not only engineered by hp (who tend to focus on low assembly costs) but is an oem build, thus severely limiting your options. a suggested next step would be to attempt to poke around in the bios setup utility and/or to try out a wider variety of cards/slot configurations. good luck.
 

9 more replies
Relevance 45.1%

I am completely stumped by this problem. I will do my best to explain it and see what you fine folks can do.

I had an older bluetooth dongle, off-brand model, 2010-2011 year, that I installed on my new desktop computer. It worked, but sound quality on my Sony Dr-BT101 headset wasn't great. It worked well with my bluetooth-enabled phones and tablets, so I suspected the dongle. I bought a CSR8510 dongle, which came with a CSR Cambridge Radio Harmony software stack. I installed the software, and turned on the headset, paired it, but no sound came out of the headset. I went to Sound, saw no entries. Went to device managers and saw the parts in yellow. I tried to update the driver but all I got was Code 18 error and this weird message in the picture. I clicked on properties and saw this message.





Quote:
The drivers for this device are not installed. (Code 28)

There is no driver selected for the device information set or element.




I am stumped. I've tried uninstalling, re-installing, installing other Bluetooth drivers, waving a magic wand, none of it has worked. I'm thinking it's a problem with the Registry, but I am not sure how to proceed.

Any ideas?

Answer:Bizarre Bluetooth driver problem (Code 18 and Code 28 error)

Give this a try. It's free.
https://www.slimwareutilities.com/slimdrivers.php
You do need to resolve those Other devices category issues.

1 more replies
Relevance 45.1%

i keep getting these two error codes every time i try to update these programs through windows update: Update for Windows 7 (KB974332) Update for Windows 7 (KB974431) Update for Windows 7 (KB976098) Ive tried to download these updates from the download centre with out any success. please help me to fix this problem im using is windows 7 ultimate 32 bit

Answer:error Code 800F081F and Code 8024200D with window 7 update

Hello,Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later. If the problem still happens, try the following steps:Rename the Windows Update Softwaredistribution folder================================================1. Close all the open windows. 2. Click "Start", click "All programs", and click "Accessories". 3. Right-click "Command Prompt", and click "Run as administrator".4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.6. In the opened folder, look for the folder named "SoftwareDistribution".7. Right-click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this ... Read more

2 more replies
Relevance 45.1%

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


thanks!!!

Answer:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

6 more replies
Relevance 44.28%

I can't update at all for the past 2 weeks, I have tried the little cmd tricks, nothing works.

Please help me!

Answer:Windows Update error code # Code 80070424

Same thing happened to me last week. I ended up backing up my important files and doing a fresh install of Windows. It was quicker and easier than all the work I put into trying to repair it.

3 more replies
Relevance 44.28%

Hi, Trying to install updates to my pc, running win 7 64bit.
Everytime it fails and I get the error codes as above.I've searched the web but cant find a fix to install the 32 updates.

Answer:error code 8000ffff and code 9C57 problem

Have you run the Microsoft Fixit Tool it seems to have worked for some people.

8 more replies
Relevance 44.28%

Just got this result. What does this mean??Thanks!

More replies
Relevance 43.46%

Error Code C00D1199 (aka: code 80040265) is an error message that can be displayed in several different ways and can be worded different as well, but it all refers to this error message originally posted as message 80040265.

There were a few posts on here about them, but many of the threads seemed to be closed. I just noticed that I have gone through all of the motions and really tried, but no pickle here....well, there might be a pickle, but it is the kind of pickle you get stuck in and is not cool whatsoever.

Here is what I have done:

1. Made sure that the format was supported with windows media player. It was, as it is an .avi, so no problems there.

Here are the types that are compatible:
.au and .snd
.aif, .aifc, and .aiff
.cda
.vob
.jpg
.swf
.dvr-ms
.mp3 and .m3u
.mpeg, .mpg, .m1v, .mp2, .mpa, .mpe, .mp2v, and .mpv2
.mid, .midi, and .rmi
.avi and .wav
.asf, .asx, .wax, .wm, .wma, .wmd, .wmp, .wmv, .wmx, .wpl, and .wvx
.wmz
2. I made sure that other .avi's I have in my collection were working properly with the WMP (Windows Media Player). They were, just not the ones I was trying to fix, of course..

3. I made a sandwich and drank some Yoohoo.

4. Installed a sturdy set of codecs with DivX to ensure that that was not it. I know I had to do it before, but I recently cleaned and started my PC from scratch again, so the previous codecs were not there.

5.Made sure all of my audio devices and drivers were updated and installed properly-for the most part-which I ... Read more

Answer:Error Code C00D1199 (aka: code 80040265)

Welcome Miss Haley, have you read through some of the suggestions here? They seem to have some detailed info on the error code C00D1199 (aka: code 80040265)
http://www.updatexp.com/c00d1199.html

I use the free "Jet Player" and love it - whether it's movies or music - there's not much it won't play or burn, (runs circles around WMP)
http://www.jetaudio.com/download/
Hope this helps
 

1 more replies
Relevance 43.46%

I am unable to install Windows updates as I get an error " Code 64C : windows update encountered an unknown error..
Same with Code 66A
Please help.
I am unable to also install Windows Live essentials
I am using Windows 7
Greg

More replies
Relevance 43.46%

Admin password or power on password1st is how do I disable it all together?2nd thing I need system disable code # 54575104

Answer:System disable code error code

@Shuwat66? Please enter            41453120 Regards.

2 more replies
Relevance 43.05%

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

More replies
Relevance 42.64%

i have not been able to solve this one for a particular user.

skydrive pro stopped syncing. it produces the error in the title. i did some googling and followed a few fixes with no luck. due to some other office issues, i wiped his machine and reinstalled windows. with a fresh install of windows and office 365 he is still getting the error when syncing skydrive.

does anyone have any idea how to fix this?
 

Answer:Error code=0x80004005; Error source=Groove __ Microsoft SkyDrive Pro Error

1. Clear all browsing history on IE
2. Stop syncing all Skydrive Pro folders (have the remaining folders moved away from the original location to avoid duplicate renamed folders)
3. Run IE as administrator and resync the libraries normally

Those are the only instructions I found that made sense.
 

3 more replies
Relevance 42.23%

my dell inspiron 1520 start give problems. after PSA diagnostic i have got error code 0146. message: error code 2000-0146. unit 1:dst log error. what does it means? what do i need to do next? many thanks

Answer:error code 0146, message error code 2000-0146

Hi,
Had this same problem on Inspiron 1545.  Just wanted add what I did that seems to have solved the problem, I'll let u know if it stops working again.  Will be posting this elsewhere as well.
Got started on this link: 
http://www.pcguide.com/vb/showthread.php?p=460856  
Laymans: 
I booted off the dell OS disk by pressing f12 at startup and selecting CD-rom/DVD. 
After files load, Click repair OS instead of Install. 
Click Command Prompt.  Type C:\   Hit Enter
Type in chkdsk     Hit Enter
After chkdsk runs, If you have the same problem I did, it will say unable to repair in read-only mode.
on C:\, Type chkdsk/r
It will prompt you that all handles will be invalid, type y and press enter.
chkdsk fixed my problem, Reboot by typing exit and press enter.  
Start Windows Normally.
 
Hope this helps, def post again if it happens again.
 
 

16 more replies
Relevance 42.23%

IN my Dell Inspiron 1520 , whenever I start my laptop I get the message "Internal hard disk drive not found.To resolve this issue, try to reseat the drive.No bootable devices -- strike F1 to retry boot, F2 to set up utility.Press F5 to run on board diagnostics."
 I ran onbiard diagnostics which showed following:error code = 0141msg error code = error code 2000- 0141msg : no drive detectedI also opened the Hard Drive by removing hard drive screws to reseat the drive and put it back again as it was there intially.But when i started my Dell Inspiron 1520 , I get the same message -- "Internal Hard Disk Drive Not Found TO Resolve This Issue, Try TO Reseat The Drive" came.Please help me in this.

Answer:'ERROR CODE:0141, MSG ERROR CODE: 2000-0141, HARD DRIVE:- NO DRIVE DETECTED'

Hi, the errorcode speaks for itself, the system can't find the hard drive, i suggest you try plugging it into an desktop system as salve to try and save data, but if it is not found there either you will have to buy a new hard drive/get one on the warranty.

25 more replies
Relevance 42.23%

hi i tried copy paste in one of my excel file with 1362 records this , but while running this macro i'm getting error code 400 . Can you help me out Thank youvinod

Answer:getting error code 400 while executing this code

It might help if you posted the code that you are having trouble with.Please click on the following line and read the instructions before posting the code. Thank you.Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

2 more replies
Relevance 42.23%

USB-IF xHCI USB HOST CONTROLLER
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

Bluetooth Server
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)

I have no idea whats going on, or how to fix it. Please help
 

Answer:Driver error's (code 31) and (code 52)HELP!!

Can you give us specs of your computer? Mainly the motherboard?
 

1 more replies
Relevance 41.82%

i need help fixing these 2 error codes 28 and 80070103

More replies
Relevance 41.82%

d version of windows 10"?
socan u please help me....
My code is:
package First;

import org.openqa.selenium.WebDriver;
import org.openqa.selenium.edge.EdgeDriver;
import org.openqa.selenium.edge.EdgeOptions;

public class Demo {


// TODO Auto-generated method stub
public static void main(String[] args) throws InterruptedException {
// TODO Auto-generated method stub
System.setProperty("webdriver.edge.driver", "C:\\Users\\Ganesh\\Downloads\\MicrosoftWebDriver.exe");
        WebDriver driver = new EdgeDriver();
        Thread.sleep(5000);
        driver.manage ().window().maximize();
        Thread.sleep(5000);
        driver.get("https://www.goair.in/");
        Thread.sleep(5000);

}

}

More replies
Relevance 40.18%

My System :
Windows XP Professional
Intel core 2 duo CPU T8100 @ 2.10GHz
1,99 gig of ram
Mobile Intel GMA X3100

My system sometimes restarts both in and out of games and so far have left these 2 events both 1003 and mini dumps as follows:

Event ID: 1003, Category: 102, Source: system error.

Error code 000000f4, parameter1 00000003, parameter2 87f91020, parameter3 87f91194, parameter4 805d297e.

Please help me, don't know what to do!
 

Answer:Random restarts -event id 1003 -system error- error code 000000f4

Your error is 0x000000F4: CRITICAL_OBJECT_TERMINATION
One of the many processes or threads crucial to system operation has unexpectedly exited or been terminated. As a result, the system can no longer function. Specific causes are many, and often best resolved by a careful history of the problem and the circumstances of the error message. One user, who experienced this on return from Standby mode on Win XP SP2, found the cause was that Windows was installed on a slave drive


The driver citted is crsss.exe and is an important part of your Windows OS.


See this link and read #2 to get some idea f what this driver does: http://www.liutilities.com/products/wintaskspro/processlibrary/csrss/


* It might pay you to do a security scan with your antivirus, etc.
 

1 more replies
Relevance 40.18%

During Windows backup, which wants to backup the 'C' drive and my games drive 'E' (for some reason), I get the following error message after the 'C' backup has completed but not the 'E':

'The backup operation that started at '‎2015‎-‎12‎-‎20T06:00:25.459859400Z' has failed with following error code '0x8078012D' (The operation failed due to a device error encountered with either the source or the destination. If the source or destination volume is on a disk, run CHKDSK /R on the source or destination volume, and then retry the operation.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.'

I ran CHKDSK \R and received several errors of the type: 'A disk read error occurred 0000185. The disk does not have enough space to replace bad clusters detected in file xxxxxx of name xxxxxx.'

My 'E' drive is 2TB with 205GB free. I really don't believe that the cluster(s) in error are bigger than 205G, but what do I know?

Anyone have experience with this problem?

Thanks.

More replies
Relevance 40.18%

I am on my 4th SSD in my Windows 10 laptop that has been getting SMART error 2000-0151. We have replaced the motherboard, the SSD, and the connector cable between the SSD and motherboard.

One thing is that I've been using Macrium Reflect to clone the drives. The new drives work for a few days with no errors, then I start getting the SMART warnings. I'm wondering if the cloning process I'm using could be causing this (and if so, any advice for avoiding/fixing the issue), or whether it's possible that I'm just having a string of bad luck with these drives.

These are WD SSD drives in an Alienware laptop. It's still in warranty and they said they will probably replace the entire laptop at this point.

More replies
Relevance 40.18%

no matter how many times i clean the drive it will still come up with this error. i can't figure out what is going on. i am able to convert the movie just fine but when it comes times to write to blank dvd, it won't do it. this is the problem i am having on my laptop which i will include the log. for some reason on my pc the program convertxtodvd doesn't even acknowledge that i have a dvd drive , i believe it is the pcouffin, which i have uninstalled and reinstalled but i cannot get it to work. it says it is working fine but device no longer available. well here is the log from my laptop which will convert but will not finish the copy.

2/20/2008 1:29:47 AM info ********** Report session closed ***********
2/20/2008 1:29:30 AM error BURN: Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burner is dirty)]
2/20/2008 1:28:14 AM info BURN: Write started 894784 sectors to write
2/20/2008 1:28:14 AM info BURN: Writing speed requested x4.0, effective x4.0
2/20/2008 1:28:13 AM info BURN: Available write speed: 8x, 6x, 4x, 2.4x
2/20/2008 1:28:13 AM info BURN: Media ID: SONY-D21-00
2/20/2008 1:28:13 AM info BURN: Media type: DVD+R
2/20/2008 1:28:13 AM info BURN: Multiword DMA Mode 2
2/20/2008 1:28:11 AM info BURN: Scanned files #8, folder #2 - total size 1831393280 b. (1.71 Gb.)
2/20/2008 1:28:11 AM info BURN: Inserted media type : DVD+R
2/20/2008 1:28:11 AM info BURN: Write started
2/20/2008 1:28:10 AM info --------... Read more

Answer:Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burne

Replace the laptops burner... Laptop/notebook CD/DVD R/W's are very delicate and are more subject to failure than desktop writers
 

3 more replies
Relevance 40.18%

Help, can't print anything and can't find out how to fix that error code

Answer:Printer Spooler has a error message <Failed to Read Description. Error Code: 193 >

Hi, go to start search and type:- cmd, right click on the returned cmd.exe and select "run as administrator" at the prompt (copy paste)


Code:
sc queryex spooler > 0 & notepad 0
(press enter) I am guessing we will see error 1058.

Next still at cmd type:-


Code:
net start > 1 & notepad 1
(press enter)

Please post both notepad entry's here.

4 more replies
Relevance 39.77%

Here's my story:

My sister's PC had been corrupted in lots of unnecessary programs and apps.
I deleted those craps. Windows Action Center then prompts me to update my windows, and I did.
PC restarted and POOF!!!, I am seem to be forever stuck in the Startup Repair Loop.
So I tried System Restore, but it's giving me the error code stated above (error 0x80070003).
I also tried System Image Recovery, and it's not also of help. Also, checking Hardware Options didn't help.
Lastly, I tried the Command Prompt option and it gives me nothing.

So how can I possible fix this error? ((

thanks in advance for those helpful respondents ))

Answer:Startup Repair Error (Forever Loop) Error Code 0x80070003

Hello Cath, and welcome to Seven Forums.

You might see if the tutorial below may be able to help with this.

Startup Repair Infinite Loop Recovery

Hope this helps,
Shawn

2 more replies
Relevance 39.77%

anyone run this one before?
I am not currently using a WIFI device.

Error 16393
Log Name: System
Source: Microsoft-Windows-Bits-Client
Date: 12/8/2015 3:05:05 PM
Event ID: 16393
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer: AllenTown
Description:
BITS has encountered an error communicating with an Internet Gateway Device. Please check that the device is functioning properly. BITS will not attempt to use this device until the next system reboot. Error code: 0x80004005.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Bits-Client" Guid="{EF1CC15B-46C1-414E-BB95-E76B077BD51E}" />
<EventID>16393</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-12-08T21:05:05.441501000Z" />
<EventRecordID>650</EventRecordID>
<Correlation />
<Execution ProcessID="844" ThreadID="1104" />
<Channel>System</Channel>
<Computer>AllenTown</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="ErrorCode">2147500037</Data&g... Read more

Answer:How resolve error 16393, BITS Error code: 0x80004005 I'net Gateway?

It happens to all my machines, and their internet connections are fine. Seems to be a common problem, but it likely isn't really causing any issues other than to those of us that look in our event viewers all the time.

8 more replies
Relevance 39.77%

I'm getting this error as well on my Dell Inspiron 1520 error code 2000-0142
Validation code 120630

Answer:I'm getting this error as well on my Dell Inspiron 1520 error code 2000-0142

The hard drive has failed - replace it with a new 2.5" 9.5 or 7 mm SATA hard drive  and reload the OS.

1 more replies
Relevance 39.77%

I love the new build . But that WhatsApp issue is a serious problem for me. All the other apps are installed but that's the only holdover. Where I'm from, WhatsApp is the most used app for communicating. But I don't want to go back to 8.1 over this single app. Used soft resets to no avail and would like any suggestions. Is there any way to install it easily from the PC ?

Answer:Anyone else getting a error installing Whatsapp on the build 10549, it says error code 0x8007007B?

I had same issue, I went back to 8.1 bro, will stick with 8.1 until most bugs sorted out, remember it's good to have spare lumia, lets say 640 or 535 to test win10 mobile on and not primary phone

2 more replies
Relevance 39.77%

PC Details: Lenovo Ideapad Flex 15
Bios Version: 8ACN08WW
Windows license: Std
 
History: I was trying to recover with OneKey to initial setting.
After running for around 12 minutes, I got this error: 0xE0EF0050.
And now when I boot up, I am getting the error:
 
"Recovery
Your PC Needs to be repaird
The application or operating system couldn't be located because a required file is missing or contains errors
File:\windows\system32\winload.efi
Error code:0xc000000f
 
You'll need to use recovery tools on your installation media. If you don't have any installation media (like disc or USB device), contact your system administrator or PC manufacturer."
 
And no, I do not have any recovery media. Just bought this laptop on Thanks Giving.
 
2 questions:

Can I recover windows from here without addition recovery media?
Where do I get Windows key? Where windows key should be, Bios screen just says "std"

Thanks in advance for your help.
 
Link to image 1
 
Link to image 2
 
Moderator note: images totalling more than 50k converted to links per forum rules:  Lenovo Community Participation Rules













Solved!

Go to Solution.

Answer:Onekey Recovery error code 0xE0EF0050 and now PC is giving boot error

hi Funzine,
 
Regarding your questions:
1. Since the OneKey Recovery process didn't completed, it's highly unlikely that you'll be able to restore Windows without using a recovery drive (see this method), a recovery disc (can be obtain from lenovo), or a standalone copy of Windows.
 
2. For lenovo systems preloaded with Windows 8, the Windows product key is embedded on the motherboard's BIOS. "STD" indicates that you have a Windows 8 Standard License. If you want to see this key, you will need to run Belarc Advisor or a similar tool in Windows to extract it.
 
If you haven't created a recovery drive using this method to Refresh / Reset the system, try running the OneKey Recovery the second time and observe. If it still fails, I recommend you contact lenovo for service or request a recovery disc (you can also tell the rep. to refer from this thread for more info).
 
Hope you get the nnit fixed soon.
 
 
Regards

3 more replies
Relevance 39.77%

Hello I keep getting this 3 errors (Error Code 0x8007042c, Error 1068 and (-5001 : 0x80070002), after installing:

Update for Windows 7 for x64-based Systems (KB2607576)

and

Update for Windows 7 for x64-based Systems (KB2603229)
Although both updates installed successfully I keep getting this errors since today when I installed those updates here are some pics:

http://i1178.photobucket.com/albums/...ewallerror.jpg

I cannot start windows firewall

not even from here

http://i1178.photobucket.com/albums/...artuperror.jpg

and I can't install games either

http://i1178.photobucket.com/albums/...stallerror.jpg
Help me please Is my computer ruined? I will provide all the information you need but please help me fix it I couldn't find any solutions on Google so please help me, I'm begging you

I cannot do a system rollback since it says there were no restore points but I could do a rollback before, I've uninstalled those updates also but the problem persist

Answer:Error Code 0x8007042c, Error 1068 and (-5001 : 0x80070002) after insta

Anyone? I'm really scared by the fact that my firewall does not work That means my computer is vulnerable

9 more replies
Relevance 39.77%

i have been having some troubles with my printer lately [Canon Pixma iP1800]
and i have been trying to enable "Printer Spooler" i went into services.msc and tried to fix the problem but came back with negative results Failed To Read Discription Error Code: 2) i later referred to Eric01's thread for further help for regedit (HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\CONTROL\PRINT\
i have found all original files mentioned in that thread with no extra files.
I have also tried to find any files within C:\Windows\System32\spool\PRINTERS and to delete anything in there.

So far i have had no luck and a report due soon.Please Help!!!!

System Specs : Windows 7 Ultimate 32x/4GB Ram/

BTW READ: in services.msc it does not read Printer Spooler but just Spooler
 

Answer:Printer Spooler Error (Failed To Read Discription Error Code: 2)

8 more replies
Relevance 39.77%

We are running Windows XP and get an error code upon booting up that says, "Setup error encountered during installation - Error code 000D". I normally go to the web to find assistance, but can't seem to find an answer this time. Most ask if I have a file called "Creator" or Roxio products installed on the computer. I have searched for these files, but haven't found any. I do have a SONIC program. And I do have Creative MediaSource, but I don't think these are the same. Any ideas? Any help would be greatly appreciated. Thanks.
 

Answer:Solved: Win XP Error - Error Code - 000D: Encountered Prob Dur Install

8 more replies
Relevance 39.77%

I'm running a Windows XP Pro system, 2gb good RAM, AMD Athlon 64 3500+, nVidia GeForce 9800 GT. I attempted to install a copy of Oblivion (which I have had and used many times in the past). The disk is in very good condition, and can be used on another machine. I have tried it on multiple drives for this one PC, but now, it will not complete the loading of the InstallShield Wizard. It gives me this error:

Error Code: -5006 : 0x80070001
Error Information:
>SetupDLL\SetupDLL.cpp (1194)
PAPP:Oblivion
PVENDOR:Bethesda Softworks (http://www.bethsoft.com)
PGUID:35CB6715-41F8-4F99-8881-6FC75BF054B0
$11.0.0.28844

I have searched for a solution online, but have not found one that works yet. Any suggestions?
 

More replies
Relevance 39.77%

I have an acer aspire netbook that used to run Windows 7. I bought a Windows 8.1 Pro disk and installed that. After that, when Windows 10 was released I upgraded but encountered a boot loop so I formatted the device and did a clean install from a bootable USB containing Windows 10. Now I receive the error code "Error code: 0xC004C003" It says the activation code has been blocked. What can I do?

More replies
Relevance 39.77%

Mod Edit: Moved from Win8 to the Am I Infected forum ~~boopmeI randomly decided to look at McAfee and check my settings, etc.  When looking at the main screen, everything states its on and green.  I had the most current definitions loaded.  When I checked my McAfee firewall it stated on.  When I clicked to go into the McAfee firewall, the screen then changed and said it was off.  When clicking the Turn On button, it would immediately shut off.  I searched this issue and the blogs stated to look at the Windows Firewall under Services.  When I checked, it was not there.  I did a Windows Search for it and found it.  When it opens it gives tells me I need to Update the Firewall Settings.  When I click on Use Recommended Settings it gives me an error "Windows Firewall can't change some of your settings.  Error Code 0x8007042c." I've checked out some of the blog discussions and followed a few thread about creating new register.bat files and running them.  I've also tried merging some .dll files also per the bloggers.  After doing these actions, the Windows Firewall now appears in my Services but when I click to start it I get the error "Windows could not start the Windows Firewall Service on Local Computer.  Error 1068:  The dependency service or group failed to start"

Answer:Can not start Windows Firewall - Error Code 0x8007042c and Error 1068

McAfee has verified I have a virus.  Will post in the Virus Forum.

15 more replies
Relevance 39.77%

Hello again, BSOD Forum,

I've been free of frequent BSODs since earlier this year. Recently I must have installed some software or something else must have gone wrong, because the blue screens are back.

Here is what happened earlier this year, in case anyone needs any further context:

Several BSODs following power outage. Varying BCCodes and frequency.

There isn't any specific behavior or action that triggers the crashes. I was listening to Spotify and browsing the internet with Chrome on the most recent crash. Also, I seem to be having trouble installing a security update from Microsoft (Security Update for Windows 7 for x64-based Systems (KB2892074)). I've tried using the "Update Readiness" tool supplied by Microsoft, but it doesn't seem to be working. It only asks if I want to install some hotfix instead of the security update that keeps failing. Not sure if these two things are related, just thought I'd throw it out there in case anyone has had experience with this issue.

Attachment 297074

Aside from that, virus scans have been clear. MSE does nightly scans (I believe), and its definitions are constantly up to date.

Attached are the SF zip files. The last crash I got was a Memory Management error. I will run Memtest86 tonight and post the results tomorrow morning. If anyone sees anything of interest in the dumps please don't hesitate to let me know.

Attachment 297071

Thanks in advance,
Jeremy

Answer:BSOD Memory Management Error, didn't catch error code.

Not happy to see you again with the issues, RaptorBuddha.

Display drivers are failing. Install and try the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Atheros network driver is failing, too. Update it from ATHEROS drivers for Microsoft Windows (Atheros?????), matching your devices model number.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.

Edit: The msinfo32.nfo file is corrupt..... upload it again for any future need.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it w... Read more

9 more replies
Relevance 39.77%

When attempting to install MS Office 2010 (also applies to Pro, Beta, and 2007) via download, you may be foiled by Error code 25004 and System error 1073418460 under Win 7 (or Vista, XP). You may also see a refusal to verify the license. This typically happens when you fail to uninstall Office 2010 Starter, Office Click, or some other version of Office before attempting to install the new Office. You would think MS had already figured out how to prevent this <sigh>.

You need to remove all the instances of Office in order to properly install the new office. However, you may also find that the Windows uninstall from Control Panel, Add or change a program will fail to remove the old Office.

This thread can be helpful, although it is somewhat dated. The RevoUninstaller sounds like a successful utility, but I have not tried it myself.
http://forums.techguy.org/business-applications/1034399-cant-uninstall-office-2010-a.html

I found this MS KnowledgeBase article appropriately addresses the removal problem
http://support.microsoft.com/kb/290301
Work your way through the methods, starting with Method 1. I was disappointed to see that the MSICUU2.exe was discontinued and found its replacement, Microsoft FixIt, was ineffective. I had to go with Method 4, which is a manual tearout.

Save a copy of the Registry before monkeying with it as it is easy to accidentally delete a wrong key. A manual tearout is tedious, but you do not have to eliminate all the indicated quids {bunchof... Read more

More replies
Relevance 39.77%

anyone run this one before?
I am not currently using a WIFI device.

Error 16393
Log Name: System
Source: Microsoft-Windows-Bits-Client
Date: 12/8/2015 3:05:05 PM
Event ID: 16393
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer: AllenTown
Description:
BITS has encountered an error communicating with an Internet Gateway Device. Please check that the device is functioning properly. BITS will not attempt to use this device until the next system reboot. Error code: 0x80004005.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Bits-Client" Guid="{EF1CC15B-46C1-414E-BB95-E76B077BD51E}" />
<EventID>16393</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-12-08T21:05:05.441501000Z" />
<EventRecordID>650</EventRecordID>
<Correlation />
<Execution ProcessID="844" ThreadID="1104" />
<Channel>System</Channel>
<Computer>AllenTown</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="ErrorCode">2147500037</Data&g... Read more

Answer:How resolve error 16393, BITS Error code: 0x80004005 I'net Gateway?

It happens to all my machines, and their internet connections are fine. Seems to be a common problem, but it likely isn't really causing any issues other than to those of us that look in our event viewers all the time.

0 more replies
Relevance 39.77%

Hi,

During a Windows 7 upgrade I am getting the following error message. Windows Setup experienced an unexpected error - Error Code: 0x0.

Searching on web I've found recommendations for setting the DMA on the optical drive (can't), updating the bios (done), checked the media (DVD Toshiba supplied Windows 7 upgrade disk) all seems OK visually and turning off antivirus (AVG resident shield turned off). I still get the same error.

Help would be appreciated.

Thanks

Answer:Portege 600-Windows Setup experienced an unexpected error - Error Code: 0x0

On which step is this error message shown?
I have done this upgrade several times successfully and without error messages.

Have you followed instructions how to do upgrade to Win7 using second component CD that removes all non-compatible tools and utilities before Win7 upgrade installation?

2 more replies
Relevance 39.77%

Ive tried a whole bunch of different things to solve this error -
an error occured during DirectPlay Voice Setup. the error code is 0x8015017

Ive tried the DPVsetup.exe fix

RESOLUTION
This problem generally occurs only the first time that you run the test. If this problem continues to occur after the first attempt, follow these steps:
1. In Control Panel, double-click Sounds and Audio Devices.
2. On the Voice tab, under Voice Playback, click Advanced.
3. On the Performance tab, move the Hardware Acceleration slider at least one position to the right.

Ive installed 2 different files..

And still the tick remains on Mute against the microphone?? I can hear sound through the mike but cannot activate it?? Can anyone help?
 

More replies
Relevance 39.77%

I was given an HP Compaq Presario C500 that was headed for the garbage because it would not connect to the internet. After running several scans ESET online scanner came up clean. Installed Microsoft Security Essentials and installed SP1, and can't get it to install SP2. I keep getting error code 80070017 / Windows Update encountered an unknown error.

I would prefer to reformat but Recovery Manager restarts back into Windows and I have no disks.

Can provide a long list of what has been done if needed including WU Modules (Normal Mode) and WU Components fixes. Permissions point in every which way but the correct way!

Any help would be much appreciated!

Free space is presently @ 42.3 GB of 68.9 GB on C: Drive (started out with 7.3 GB's free space! )
and 4.91 GB free of 5.53 GB on Presario_RP (D)

Specs as follows:
Vista Home Basic
Intel (R) Celeron (R) MCPU
[email protected] 1.60GHz 1.60 GHz
512 MB RAM
32-bit OS
Denied access to the CBS folder itself though can access CheckSUR.log which I am including along with sfcdetails.

=================================
Checking System Update Readiness.
Binary Version 6.0.6001.22375
Package Version 5.0
2010-10-04 19:57

Checking Deployment Packages

Checking Package Manifests and catalogs.

Checking package watchlist.

Checking component watchlist.

Checking packages.

Checking component store
Summary:
Seconds executed: 2478
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.0.6002.224... Read more

Answer:Error code 80070017 / Windows Update encountered an unknown error

Checking Component Store
(f) CSI ReadFile Failed 0x00000017 winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990\wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990
(f) CSI Payload File Corrupt 0x00000000 wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990



You have corrupted C:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f699
folder thus this issue with updates ,I'm not fully sure it's only issue with wcp.dll or with full folder.For precaution I recommend replace all files in this folder.

How to fix:

1.First prepare special recovery disk Create a Recovery Disc
and make sure boot order in your BIOS is CD-ROM,C,A
(if you don't know how to to do that then check your computer manual)

2.Download attached to post FixPacks.zip file -in zip file is packed Packs folder -you have to unpack it and place directly on C: exactly as I show below:

Click this bar to view the full image.
3.Boot burned special recovery disk (if you don't have Vista DVD instead use special recovery disk )
Choose language>>Repair Computer>>WinRE>>command prompt

and type:

robocopy C:\Packs C:\ /E /IS

press ENTER

del C:\Windows\Logs\CBS\*.*

press ENTER

4.Back to your system and run Readiness Tool again.
5.Try install SP2 from Microsoft Dow... Read more

49 more replies
Relevance 39.77%

I have been having problems installing 8 updates since early May 2012. I am getting the error code in the title line.

The updates are:

[LIST][*]Security Update for Microsoft Office 2007 suites (KB2596672)[*]Security Update for Microsoft Office 2007 suites (KB2596792)[*]Security Update for Microsoft Office 2007 suites (KB2596880)[*]Security Update for Microsoft Office 2007 suites (KB2597162)[*]Security Update for Microsoft Office 2007 suites (KB2597969)[*]Security Update for Microsoft Office Excel 2007 (KB2597161)[*]Security Update for Microsoft Office Word 2007 (KB2596917)[*]Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2687267)

I have run FixIt, but to no avail. I have also turned off services and rebooted and ran Windows Update and still got this error.

Do I need to just skip these updates, or somehow troubleshoot this and fix it. If I need to fix it, I need help.

Regards, and thanks.

More replies
Relevance 39.77%

Help I need assistance solving this problem.

When installing Windows 2000 setup copies the initial files to the hard drive and then restarts to begin the 1st stage of setup.

The system begins the startup process by "Loading the Windows Executive" At this point setup stalls and gives the following message:
"Setup cannot load ntkrnlmp.exe the error code is 16"
This error is duplicated in different releases in win2k from the beta 3 to the final releases.

Please assist, respond to [email protected] or ICQ 1937432
 

More replies
Relevance 39.77%

I am using dell inspiron n5110 15R, my computer suddenly turns off after it is turned on, I've updated the bios version, but this is still happening I have run diagnostic and Error Code is 2000-0511 , Validation  is 14996
What should I do next?

Answer:Processor Fan Error - Error Code: 2000-0511 Validation 14996

Hi,
Thank you for writing to us!
The error code that you have provided to us ( 2000-0511) is a fan not functioning error.
We would like you to check if there is any dust/obstruction in the air vents.Also let us know if you have updated the BIOS after you had this issue.
We would also like for you to check when you run diagnostics on the system kindly make a not of the RPM of the fan and also not if the system heats up.
Kindly private message the service tag and email address.
Thanks
Robin

1 more replies
Relevance 39.77%

I have purchased the Acer eRecovery Discs and when I go thru the process of running the recovery I get the error that is in the subject line. it fails on the same file everytime POP01ICW0OX03C1161.SWM. I have changed out the HDD and DVD drive out with fresh ones, and yet the error remains. I contacted the tech support and the transcripts of that conversation will be at the bottom. I have tried finding the .iso of the disc I am having issues with but I can not find it anywhere online. I dont want to pay another $20 for another set of discs that may or may not work. I used Ultimate boot disc to verify the health of the HDDs that i have tested.
 
 
 
[edited to comply with guidelines]
 













Solved!

Go to Solution.

Answer:Restore failed - Error code=0x17(Data error (cycli...

Got it.
 
We've been making that recovery media for nearly 3 years, I don't think it's a flaw with the software, but maybe a bad disk.
 
I talked to the store team where they were originally ordered and they're going to setup another set to be sent out. I'll followup in a PM with order numbers and other information Monday.
 
Thanks,Cory

10 more replies
Relevance 39.77%

Hi,
I have been having some recurring problems with the attempts to install some automatic windows updates.

Security Update for Microsoft Office Acess 2007
Security Update for Microsoft Office Outlook Junk Email Filter

I am not able to install these updates, maybe any other updates in general. After attempting the install the following install window says, "Windows Update encountered an unknown error." Next to it an error code 80070643. Microsoft provides a solution to the problem, by re-installing Microsoft NET. Framework. They also provide a link to the program NET. Framework cleanup tool that enables you to uninstall NET. Framework, and it's components.

I followed Microsoft's instructions to solve the issue, though I've been put at a standstill. I have used the NET. Framework Cleanup tool to uninstall NET. Framework and it's components (states that it uninstalls all versions, 1.1 SP1 1.1, 2.0, 3.0, 3.5.) Then afterwards instructed to reinstall NET. Framework, specifically in an order, 3.5 then, 1.1, then 1.1 SP1. I start with 3.5, then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel. I do so and turn off all Windows features. Then continue and it again states to turn off features in the Control Panel.

I wasn't able to continue the process, and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials, (as t... Read more

Answer:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

1 more replies
Relevance 39.77%

Updates regarding to error code 80240020
After having Upgrade Windows 10 Home failed installation error code 80240020 in Windows Update history (about 23 failed) starting August 1 through August 4. I now have the Upgrade to Windows 10 and Get started button in Windows Update.
I also notice message in Get Windows 10 app right next to OK, notify me ready button there's a message about They are working hard with partners to make upgrade better Install anyway link button style underneath that it display (not recommended) something like that but I don't exactly remember the exact message because that message is now gone when i close the Get WIndows 10 apps.
I also did this before turning on my computer remove the HDMI cable that I always use and use the VGA instead. It might just be a coincidence

Answer:error code 80240020 It means wait for the upgrade to notify you or they fix that error.

I used the media creation tool to get around the same issue, worked flawlessly and let me install without hiccups.

2 more replies
Relevance 39.77%

We recently deployed MBAM. While most users are not having issues, there is a group of users that continuously get prompted for the Recovery key every boot up. They wont even get prompted for the PIN. we have tried:
Turning bitlocker on and off (un-encrypt & re-encrypt)
Suspend and enable. (suspend, reboot, re-enable)

TPM is on &  activated on the problematic machines. they are different models. All computers in the environment are legacy boot (BIOS) and both, but no one is set to only UEFI.

If the UEFI was the issue everyone would have this issue. BIOS is up to date on these machines. These are mainly Lenovo T430 and T460, and one Dell XPS touch screen (2016)
Sadly this is hindering some of the top people within the company. I have researched this error code with no avail. any assistance would be greatly appreciated!  
 

More replies
Relevance 39.77%

The followings (10) updates are not possible to install
KB 3080149
KB 3101746
KB 3042058
KB 3060716
KB 3101246
KB 3033929
KB 3068708
KB 3071756
KB 3081320
KB 3061518
I need some help and explanations about these problems.
Thank you in advance
Edouard Oberson

More replies
Relevance 39.77%

My OS is Win7 Pro 32bit with SP1 and all updates installed.
Whenever I try to open Windows Live Photo Gallery I am told: Windows Live Photo Gallery encountered an error and cannot start. Error code 0x80070002.
I have the latest version of WLPG.
I have tried uninstalling and reinstalling the program and the repair option, and a Microsoft Fixit which says it succeeded, but the problem persists.
The strange thing is that if I open My Pictures then open a folder and select a picture it opens in WLPG,but if I then click on Edit the program crashes.
If anyone can tell me how to fix this problem I would be grateful.
Thanks and regards,Roy

Answer:Windows Live Photo Gallery encountered error, cannot start. Error code 0x80070002

Hello there!
Follow these
You may be experiencing this problem if the database that is use to track of the photos and videos in Windows Live Photo Gallery is corrupted. To fix this issue, follow the steps below:
To regenerate the database file:
Close Windows Live Photo Gallery.
Start, in the Start Search box, type %userprofile%\Local Settings\Application Data\Microsoft\Windows Live Photo Gallery, and the click the OK button
Right-click Pictures.pd6 and select Rename.
Change the name of the file, for example, pictures.bak.
Start Windows Live Photo Gallery.
To regenerate the Windows thumbnail cache:
Close Windows Live Photo Gallery.
Click Start, in the Start Search box type %userprofile%\AppData\Local\Microsoft\Windows\Expl orer, and then click OK.
Right-click in the Explorer window and select New Folder.
Select all *.DB files and move into the New Folder directory.
Start Windows Live Photo Gallery. If that failed then
A. First, make sure that the Windows Live Photo Gallery program is not running.
1. Press CONTROL+ALT+DELETE, and then click Task Manager.
2. Click the Process tab.
3. Click WLXPhotoGallery.exe, and then click End process. Uninstall WLPG
1, Click Start, in the Start Search box/Search programs and files box, type or copy/paste “C:\Program Files\Windows Live”, and then press ENTER.
2. Select the Photo Gallery folder and then press the Delete key.
3, Reinstall Windows Live Photo Gallery
Source: A... Read more

9 more replies
Relevance 39.77%

Hello! First post on this forum but been browsing for some time. My machine: ThinkPad S430, type-model: 3364-5HG, Win 7 x64, 500 GB HGST HDD. My problem is notably similiar to this one: https://support.lenovo.com/us/en/documents/ht082504.The problem occurs on very irregular basis, at times a couple of times a day but other times it goes weeks between the interrupts. It starts with some sort of short mechanical sound from the HDD, similar to the one when you turn the laptop of by pressing and holding the power button (only do this if I absolutely have to, it feels like choking someone with a pillow). After the sound, the screen freezes for a couple of seconds before the short bluescreen mentioned in the link occurs. The rest is as follows by the link above. Basically the only difference is the HDD brand (HGST in my S430 and Samsung in the link). After reboot (with power button during the automated reboot after bluescreen when the error code occurs), the laptop works fine.  It's getting quite annoying when this happens and also the suspension of not knowing when it will happen next is not good for my heart. What to do? Thanks in advance! Regards,Nicholas

More replies
Relevance 39.77%

Hi,

When my Dell Inspiron 1501 locked up, I restarted it. It looked ok during the startup process untill it came to the Dell screen with the bars running across the bottom of the screen. There, it brought up the Blue Screen with the error "0x00000024 (0x00190203, 0x8aa211f8, 0xc0000102, 0x00000000)" When I restarted it, it brought up another blue screen with "0x00000024 (0x00190203, 0x8a950890, 0xc0000102, 0x00000000)"

I restarted it again and pressed the f12 key. I ran an express test on the computer, and it brought up these errors: "Error Code 0F00:1344 Msgisk_0-Block 5320033: Uncorrectable Data Error or Media is Write Protected" and "Error Code 0F00:065D MsgISK_0 - the self-test failed the read portion of the test"

What do these errors mean and what can I do to repair the computer? Is there a Hard Drive issue?

Thank you for your help
Jttech
 

More replies
Relevance 39.77%

Hi,

my laptop is giving me this error message in the begining:

Retrieval of "ThotKey" Failed.

Error Code - 0x00031402, 0x00000002

and with it i can not use the hot keys.

Can you guys help me, please?

Answer:Startup Error Message Error Code "ThotKey" Failed

Hi

I hope I can help you.

I would recommend removing this tool from the operating system.
You can remove it from the ?add & remove programs? which can be found in the control panel.

Then download the new tool from the Toshiba page and install it again!!

Good luck

2 more replies
Relevance 39.77%


Hello All,

We are facing issue in domain machines as group policy is not updating. after rejoin the domain it's working perfectly.

Below are the event IDs : 7320, 7007, 7326, 1017, 7016

local administrator is able to update group policy properly but non of domain user able to update grou policy properly.

below is the error.


Component Status
Component Name
Status
Last Process Time
Group Policy Infrastructure Success 8/20/2015 1:58:15 PM
Folder Redirection Pending 8/20/2015 1:58:05 PM
Folder Redirection did not complete policy processing because the user needs to log on again for the settings to be applied. Group Policy will attempt to apply the settings at the user's next logon.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 8/20/2015 1:58:04 PM and 8/20/2015 1:58:05 PM.



Thanks, dashrath Chate 9763107923

More replies
Relevance 39.77%

Hello. I just freshly installed Windows 10 and I'm having this error while trying to install directx through Steam or independently.

Tried following things;

- Updating almost everything on computer.
- Clean boot.
- Safe mode.
- sfc /scannow
- installed directx through microsoft's website.
- run dism with all three modes. check, scan, restore.

But still getting this error while trying to install directx for individual games. And there is no exception, I get his error for every game I tried to install. Anybody encountered something like that or know a solution?

Edit: Had to reinstall windows 10 with another iso file.

More replies