Computer Support Forum

Office 2007: The application has failed to start because the side-by-side config...

Question: Office 2007: The application has failed to start because the side-by-side config...

This morning I came into my office to find my pc (p4, win7) apparently in a loop. the cpu usage was very high on all four processors, and the disk usage was high as well. I tried restarting the computer but there was so much cpu usage that I couldn't even type. So after 10 minutes or so, I just pulled the plug.

The first problem was that Norton Internet Security stopped working. After an hour on 'chat' with Symantec, they reloaded the software for me and now NIS is working properly. But I still have (at least) two probems. (1) My RIMDeviceManager fails with an 0xC015002 error, and all my MSOffice 2007 programs fail with "The application has failed to start because its side-by-side configuration is incorrect."

I unstalled all the Microsoft C++ programs and then did an MSOffice "repair" and it looks like C++ Redistributable (32 and 64-bit) were re-installed, but Outlook, Excel, etc, still get the same error. Everything I've read about fixing the problem is way over my head (and I'm fairly technical). Does anyone have a clue what I should be tracking down?

Relevance 100%
Preferred Solution: Office 2007: The application has failed to start because the side-by-side config...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Office 2007: The application has failed to start because the side-by-side config...

Re: Office 2007: The application has failed to start because the side-by-side config.

I've done some more checking and find that quite a few programs are failing to initialize because of this side-by-side thing: Adobe Premiere Elements and Adobe Photoshop Elements, Cyberlink Power Director 8, Microsoft LifeCam (no error, it just doesn't do anything), FormatFactory - there may be more, I haven't checked them all. Each program fails to initialize with the 'side-by-side configuration' error message. Please help!!

8 more replies
Relevance 104.4%

Hi friends,


My friend is using windows 7 and facing this error for all the applications tried to run..

the exact error goes like this " The application has failed to start because the side by side configuration incorrect "

i have done system restore but as the problem appears to existing from long time it was still there.

kindly let me know the best resolution steps for this issue.



thanks in advance.

Answer:The Application has failed because its side by side config

See if any of these help,
The application has failed to start because the side by side - Microsoft Community

1 more replies
Relevance 101.21%

So, I had the same problem as above. I had developed a dll using Qt that worked fine on my machine but would not register on another. The familiar "This application has failed to start because the application configuration is incorrect..." appears when I ran the depencency walker on the dll.

So this was the solution that worked for me, which may help some others see what's going wrong here:

Within my dll the manifest emedded read:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0">
<dependency>
<dependentAssembly>
<assemblyIdentity type="win32" name="Microsoft.VC80.DebugCRT" version="8.0.50608.0" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity>
</dependentAssembly>
</dependency>
</assembly>

It seemed that the assembly definition was not found upon my client computer. So then, from within my original computer's 'Windows\WinSxS' directory, I copied the 'x86_Microsoft.VC80.DebugCRT_1f...' directory and it's associated files within the 'Policies' and 'Manifests' directories onto the client computer. Once copied, the dll registrered fine.

Hope this helps...
 

Answer:Solved: application has failed to start as side by side configuration is incorrect

As above where?
 

1 more replies
Relevance 100.92%

whenever i start an application an error comes out saying 'The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.'i already did a lot of searching on the web such as installing that c++ 2005 v86 redistrituble, installing visual stuido 2008 sp1 and some other minor things. However this problem is still around. help will be appreciated thanks.

Answer:application failed to start because side-by-side configuration is incorrect.

I was going to tell someone to close this post coz i found a thread that is similar to this. but i dont know why the other thread that i just wrote in isnt bumped at all. Maybe because i wrote it more than 30 days after the previous post was written?

1 more replies
Relevance 100.92%

Windows 7 64-bit. None of my applications or programs work not even internet explorer (sending this from another computer).

I ran HJT and this is what I got

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 7:26:34 AM, on 6/3/2011
Platform: Windows 7 (WinNT 6.00.3504)
MSIE: Internet Explorer v8.00 (8.00.7600.16766)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\TOSHIBA\ConfigFree\NDSTray.exe
C:\Program Files (x86)\TOSHIBA\ConfigFree\CFSwMgr.exe
C:\Users\Aja\Documents\HijackThis.exe
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page =
http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://msn.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL =
http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page =
http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch =
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page = C:\Windows\SysWOW64\blank.htm
R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =
R3 - URLSearchHook: Zynga Toolbar - {7b13ec3e-999a-4b70-b9cb-2617b8323822} - C:\Program Files
(x86)\Zynga\tbZyn1.dll
O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files (x86)
\Common Files\Adobe\Acrobat\ActiveX\AcroIEH... Read more

More replies
Relevance 100.92%

Windows 7, on Toshiba Laptop, all of the recent windows updates have been installed.
I was having issues running the new zynga game on facebook, the ville. I assumed that it was a resource hog and didn?t like the laptop, and it was possible that I didn?t have the most recent installment of Adobe flash, so I upgraded that as well. It still wouldn?t run. So I decided to clean up the hard drive.
I used control panel to uninstall a game that the kids no longer play because it?s now obsolete. I also uninstalled Quickbooks (it wasn?t just quickbooks, it was a bunch of crapware that was installed on the laptop when we purchased it, but since we don?t use quickbook I figured we could get rid of it.) the only reason I bother stating all of this is because I believe in full disclosure. You never know which action caused the issue so it?s best to tell it all. Sorry for the ramble.
I have been noticing that the machine was running slower lately, so that is why I decided to de-clutter the hard drive.
After doing this and rebooting I found that I was unable to run Rockmelt, it came up with the following:
Error: The application has failed to start because the side by side configuration is incorrect please see the application event log or use the command line sxstrace.exe tool for more detail
I consider myself a fair pc tech so I have been troubleshooting this for most of the day by searching it out on the internet, for the most part I have been told to update the C++ redist, I have m... Read more

More replies
Relevance 100.92%

My friends computer is displaying the message: "the application has failed to start because its side-by-side configuration is incorrect. please see the application log for more detail.", when trying to open Microsoft office and Windows live messenger.

Obviously the programs do not open.
How do we solve this?

Thanks, Joe.

Answer:the application has failed to start because its side-by-side configuration is incorre

I have seen this before. Do you have AVG installed? AVG and the C++ redistributable seem to conflict. Uninstalling and reinstalling both fixed it.

7 more replies
Relevance 100.92%

Hi whenever i open the Microsoft word documents infact every microsoft application is not opening.

To fix this sissue steps taken

1)installed Microsoft visual c++ 2010 as all previous versions are already installed

2)run sfc /scannow result:corrupted files found but cannot repair

3)repaired Msoffice home and student edition

4)uninstalled msoffice

5)when reinstalling it won't install

6)so at the end i restored my system from where i started.

Can anybody please help me in resolving this issue
i am using windows vista home premium edition.

Answer:Application Failed to start side by side configuration incorrect

I have posted 3 posts for help but unfortunately no one has replied with solution on any of the issues so i think that no one here is bothered here to help. I am greatly disappointed by this forum as i joined to interact and get help and help others however i am not getting any help.

4 more replies
Relevance 100.92%

This is the error I get when I tried to install Avast on my cousin's computer. The same error message appeared when I tried to install it on my own machine but all I had to do was uninstall and reinstall to get it to work. I gave up with it for my cousin's computer and just used that one that they had installed on their old machine. I want to get rid of Norton on my laptop, but don't want to be left hanging with no AV if I get the same error on my laptop. Anyone have any insight before I do this?
Thanks,
Spock96
 

Answer:the application has failed to start because its side-by-side configuration is incorre

Re: the application has failed to start because its side-by-side configuration is inc

You do not mention the version of windows on those two computers.

If Win 7
http://allinfoatoneplace.org/windows/avast-antivirus-error-application-failed-to-start/

if Vista read the last post in this thread
http://forum.avast.com/index.php?topic=123424.msg937287#msg937287
 

3 more replies
Relevance 100.92%

Hi, I'm hoping someone here can help me, I was referred to this forum by nasdaq in the malware removal forum to help with some residual problems I've been having with my hp notebook (http://www.bleepingcomputer.com/forums/t/498613/infected-with-virus-appplicunwntwin32adwareibryteh289567536/
).
 
The following error is popping up when I try to open certain programs on my computer: "The application failed to load because its side-by-side configuration is incorrect.  Please see the application event log or use the command-line sxstrace.exe tool for more detail."
 
I am able to access the sxstrace.exe tool but when I try to get the trace to run, I get an error message- "Access is denied" (see above post for screenshots, etc.).  At first I just noticed this happening with my Kindle for PC, but has now graduated to my Dropbox as well.
 
Any advice on what to do next?

Answer:Error Msg: This application failed to start because its side-by-side configurati

I am currently trying the steps listed here-
 
http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/this-application-failed-to-start-because-side-by/7673bf12-87c2-48ca-b5ae-b8aa85e295dc 
 
and will advise.
 
Also- I realize the sxstrace.exe tool may not have worked because I didn't access the cmd prompt in administrator mode which gives me a different prompt: Windows\system32.
 
Will try that as well.

11 more replies
Relevance 100.92%

My vista home premium was running perfectly until June 26, 2010 after a recommended download from the Microsoft update site.(Microsoft .NET Framework 4 Client Profile for Windows Vista x86 (KB982670)).

At first I couldn't even get on the internet at all. Local only network. Called my ISP, verified it was not their hardware, or my computer. Called Microsoft, they at least got me back to the internet. Now when I go to open programs that worked perfectly well before I get this message: "The application has failed to start because it side-by-side configuration is incorrect. Please see the application event log for more detail." A few programs still open, most do not. The ones that don't all come up with this same msg. These are the ones that don't open:
Adobe Photoshop Elements 8.0.exe
zoombrower Ex.exe a canon photo editing program,
c:\Program Files\Microsoft Works\WksWP.exe
" \ " \ " \WksCal.exe
" \ " \ " \wksdb.exe
" \ " \ " \WksSb.exe
" \ " \ " \wksss.exe
Norton Security Program c:\Program Files\Norton 360\Engine\3.8.0.41\uiStub.exe
Quicken WillMaker Plus 2009 c:\Program Files\Quicken WillMaker Plus 2009\qwp.exe
Windows Live:
c:\Program Files\Windows Live\Mail\wlmail.exe
" \ " \ " \Photo Gallery\MovieMaker.exe
" \ " \ " \Photo Gallery\WLXPhotogallery.exe
There are others but I think they don't open because the system restore program cannot complete a syst... Read more

More replies
Relevance 100.92%

I get this message whenever i try to start ay program in the Microsoft office and with trillian. I have tried re installing office but have not had any success in getting the program to run. Is there anything i can do to get these programs running again?

 error.png   152.54KB
  10 downloads

Thanks,
Ryan

Answer:the application failed to start because its side-by-side configuration is incorrect

I saw that message in Office 2010 when I had it over more than one drive, program on C, files on E it went badly. ended up uninstalling an re-installing on just C:// and never had the issue again

4 more replies
Relevance 100.92%

"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail."

First of all, I've gotten this on at least 3 different programs. Everyone who's written about this seems to think it's related to their specific program...it's not! Secondly, what I find here in the forum on the subject tells me there has been no solution...also am unable to find any on the 'net'. I think it acts like a virus and is spreading...

What's up with this??? Does anyone know...? It has kept me from opening iTunes so I can't work with my iPad anymore. Certainly there must be someone knowledgeable enough to know what this is and what to do about it...right?:

 

More replies
Relevance 100.92%

Hello
I have come across a few similar posts regarding this error message but mine seems to display a different error message when using the event log. I have noticed that the error messages posted by other users displayed are quite different e.g. D:\3ds
Max 2011\3dsmax.exe".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.openmp_1fc8b3b9a1e18e3b_9.0.30729.4148_none_0e9108e3b72e14d4.manifest" on line 0. Invalid Xml syntax.
I dont receive such a detailed error message. My error message in event log is: Activation context generation failed for "S:\spa\spa.exe".Error
in manifest or policy file "S:\spa\spa.exe" on line 0. Invalid Xml syntax.
I am using a software called premier spa and it keeps failing to open. 
I just wanted to post my error message and see if anyone has any suggestions on how to fix this problem. 

Thank you.

More replies
Relevance 99.76%

I recieve this error for every program that i try to open. Tryed to uninstall vc 2005 and vc 2008 same problem.


"application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.




Code:

CBS Starting TrustedInstaller initialization.
2010-11-27 13:55:18, Info CBS Loaded Servicing Stack v6.1.7601.17105 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17105_none_67912f55dde10d6f\cbscore.dll
2010-11-27 13:55:20, Info CSI [email protected]/11/27:12:55:20.225 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee70ce94d @0x7fee7d99839 @0x7fee7d634d3 @0xff58e94c @0xff58d769 @0xff58daff)
2010-11-27 13:55:20, Info CSI [email protected]/11/27:12:55:20.423 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee70ce94d @0x7fee7de6806 @0x7fee7db2a9c @0x7fee7d635a9 @0xff58e94c @0xff58d769)
2010-11-27 13:55:20, Info CSI [email protected]/11/27:12:55:20.430 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee70ce94d @0x7fef6168728 @0x7fef6168856 @0xff58e444 @0xff58d7ae @0xff58daff)
2010-11-27 13:55:20, Info CBS Ending TrustedInstaller initialization.
2010-11-27 13:55:20, Info CBS Starting the TrustedInstaller main loop.
2010-11-27 13:55:20, Info CBS TrustedInstaller service starts successfully.
2010-11-27 13:55:20, Info CBS SQM: Initializing online with Windows opt-in: False
2010-11-27 13:55:20, Info CBS ... Read more

Answer:Application has failed to start because its side-by-side configuration

I had the same problem, some file got corrupt but cant remember what ones. i had to go for a fresh install of the app!

this may help you!

Resolving Side-by-Side Configuration errors (Windows Vista/7)

1 more replies
Relevance 99.76%

This application has failed to start because it's side by side configuration is incorrect. Please see the application event log for more detail.

This message pops up when I click any icon. So i pretty much can't do anything on my laptop. Please please please help me. I can't even open the internet browser.
 

Answer:The application has failed to start because it's side by side confirguration is..

Can you boot into safe mode??
 

1 more replies
Relevance 99.76%

ERROR says,
The application has failed to start because its side-by-side configuration is incorrect. Please see the applications event log or use the command-line sxstrace.exe for more detail.

Answer:The application has failed to start because its side-by-side configura

what program are you running? Try to uninstall, reboot--> reinstall the program, then reboot. I've seen this a lot, sometime trying to uninstall third party firewall, then reinstall the program are solutions

Regard,
Tuan

1 more replies
Relevance 99.76%

"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail."

First of all, I've gotten this on at least 3 different programs. Everyone who's written about this seems to think it's related to their specific program...it's not! Secondly, what I find here in the forum on the subject tells me there has been no solution...also am unable to find any on the 'net'. I think it acts like a virus and is spreading...

What's up with this??? Does anyone know...? It has kept me from opening iTunes so I can't work with my iPad anymore. Certainly there must be someone knowledgeable enough to know what this is and what to do about it...right?:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz, x64 Family 6 Model 15 Stepping 6
Processor Count: 2
RAM: 3070 Mb
Graphics Card: NVIDIA GeForce Go 7600 , 256 Mb
Hard Drives: C: Total - 95394 MB, Free - 35270 MB; D: Total - 95393 MB, Free - 30543 MB; F: Total - 93895 MB, Free - 65602 MB; G: Total - 11425 MB, Free - 11397 MB; M: Total - 11425 MB, Free - 308 MB;
Motherboard: Quanta, 30BD, 66.42, None
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

Answer:The application has failed to start because its side-by-side configuration...

You probably need Visual Studio C++ 2005 or 2008 Redistributable runtime files installing to fix this error:
http://www.microsoft.com/download/en/details.aspx?id=29
http://www.microsoft.com/download/en/details.aspx?id=3387
 

1 more replies
Relevance 99.76%

I'm at my wits end so I really hope someone can help. Every time I try to open a MS Office 2010 program, I get an error message "the application failed to start because its side-by-side configuration is incorrect. Please see the application event log for more details." I have not made any changes or added any programs.
I am running Vista SP2
I tried uninstalling and reinstalling Office.

I can open every other program, even other Microsoft programs, such as Frontpage 2003
 

Answer:The application has failed to start because its side-by-side configuration

Hi TamariaM

Googling your error message gives this link:
http://www.codeproject.com/KB/winsdk/sidebysideerror.aspx
http://blogs.msdn.com/b/developingf...rror-message-given-launching-dynamics-gp.aspx

Do you have Visual Studio installed?
Did you check the Event Viewer as the error message advised?
 

1 more replies
Relevance 98.02%

i cannot open Adobe Flash Professional cs6, game application "wildtangent games", and mozilla firefox
i received error message
c:\Program Files (x86)\WildTangent Games\App\GameCosol-wt.exe
the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail
i try to use sxstrace.exe but the command-line can't opened, and i try with the event log and use Event Log Online Help, i've try to fix with regedit.exe but still not work

i am using Notebook hp Af115au which is running win10 home single language versi 10.0,10240 Build 10240, system type: x64-based pc
Please assist and if you require further information, i will try to give it asap.
Than you

More replies
Relevance 98.02%

I have Windows 7 and I recently installed CCleaner and degragler and ran and re-ran then both. Since then I cannot get into Mozilla and I recently installed Trend Micro because my anti-virus was about to expire. The error message I get states:

C:\Program Files\Trend Micro\Titanium\UIFramework\uiWinMgr.exe

The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detal.

Please help me.

Answer:Application has failed to start because its side-by-side

From Microsoft this is their version of the problem -Error message: "Side-by-side configuration is incorrect"The machine is missing the correct C++ runtime components for your type of system. (x86 or x64). Installing the following updates resolved the issue. Microsoft Visual C++ 2008 SP1 Redistributable Package (x86) http://www.microsoft.com/downloads/en/details.aspx?familyid=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en Microsoft Visual C++ 2008 SP1 Redistributable Package for (x64) http://www.microsoft.com/downloads/en/details.aspx?familyid=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=enMicrosoft Visual C++ 2010 Redistributable Package (x86) http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a7b7a05e-6de6-4d3a-a423-37bf0912db84 Microsoft Visual C++ 2010 Redistributable Package (x64) http://www.microsoft.com/downloads/en/details.aspx?FamilyID=bd512d9e-43c8-4655-81bf-9350143d5867 Thank You -

6 more replies
Relevance 89.03%

I receive the  error message below when trying to load a program on my machine. Any clue to what might
cause this problem?
 
'The application has failed to start because it's side‐by‐side configuration is incorrect. Please see the application
event log or use the command-line sxstrace.exe tool for more detail.'
 
 

Answer:The application has failed to start because it's side‐by‐side...

1.  Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 
2.  Please download and install Speccy to provide us with information about your computer.  Clicking on this link will automatically initiate the download.  

 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
Louis

13 more replies
Relevance 87.58%

Running Windows 7. MS Office Basic 2007 will not open up word, excel, and outlook. I get the side by side configuration error. In checking the event log, it says that the Snap MMC would not start. I am totally lost and do not want to reformatt the hard drive.

I have uninstalled all the .NET programs and the office program. I ran all the Windows updates. I uninstalled the Visual C ++ programs and reinstalled them.

Please help.
 

Answer:Office 2007 side by side configuration error

Hi, welcome to the forum,

I have never heard of this but found this using Google :

http://www.codeproject.com/KB/winsdk/sidebysideerror.aspx

Maybe you can find your solution here,

Good luck

BTW, no need to format.
 

1 more replies
Relevance 86.13%

I booted up my new E450 and am getting this error: tvsukernel.exe The application has failed to start because its side-by-side configuration is incorrect. Is this something I should be concerned about?

More replies
Relevance 86.13%

I recently performed a Lenovo update on my T430si, and now I am getting an error that TvsuCommandLauncer.exe failed ot start because side-by-side configuration is incorrect.  This laptop is now running Windows 10 and also running very slow.  That is why I tried to do the Lenovo update, thinking it would help with performance. Does anyone have any suggestions on how to resolve this?

More replies
Relevance 85.26%

When I tries to run Glary Utilities 5.46, the following error message appears.
'The application has failed to start because the side by side configuration is incorrect please see the application event log or use the command line sxstrace.exe tool for more detail'

I had posted a question in Microsoft Community and did what the support engineer said, including repairing corrupted files with RestoreHealth and re-installation in compatible mode, but the side by side configuration error still appears. What else can I do?

The following have already been installed. http://fud.community.services.suppor...9-a0777b03746e

More replies
Relevance 85.26%

When I tries to run Glary Utilities 5.46, the following error message appears.
'The application has failed to start because the side by side configuration is incorrect please see the application event log or use the command line sxstrace.exe tool for more detail'

I had posted a question in Microsoft Community and did what the support engineer said, including repairing corrupted files with RestoreHealth, re-installation in compatible mode and restarting the computer, but the side by side configuration error still appears. What else can I do?

The following have already been installed. http://fud.community.services.suppor...9-a0777b03746e

More replies
Relevance 78.88%

I am trying to fix my friends computer which is having several weird issues. When you login everything appears to be normal but Windows loads to a black screen with a cursor. Ctrl + Alt + Del to task manager and I can run explorer.exe to restore the desktop. However the problem now is once your at the desktop all programs when you try to run them pop up with an application failed to run side-by-side configuration is incorrect. these problems are not apparent when the computer is ran in safe mode, but I can not figure out what to do. I checked the registry HKLM software windows nt logon and explorer.exe is the value.
Malwarebytes when ran in safe mode does not detect anything either.

Answer:windows logs in to a black screen, programs have side by side config

Some possibilities: this application failed to start because side-by-side-configuration is incorrect

Was this computer upgraded from Vista to Windows 7? If so that may be the cause. You can try doing a Repair Install of Windows 7 to see if that corrects the problem.

3 more replies
Relevance 78.59%

Hello

I am usually the person people go to when they have computer issues, but I am not by any means formally educated in any IT field or even familiar with C++, bin, dll files etc. but I am pretty good at figuring out resolutions to fairly complex computer situations both hardware and software related. Unfortunatly I am having quite a few problems with my new Vista laptop that I cannot resolve after trying every suggestion seen online.

1.) It seems to have started with Adobe. I installed adobe reader, and since then all my office programs, adobe, most other applications do not open. The error is a side by side config error. Heres are some examples in event log.
//
Activation context generation failed for "C:\Program Files (x86)\Common Files\Symantec Shared\coShared\Browser\2.0\CoIEPlg.dll".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.
//
Activation context generation failed for "C:\Windows\Microsoft.NET\Framework\v2.0.50727\fusion.dll".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.
//
Activation context generati... Read more

Answer:Multiple issues including Side by Side config error

A quick update...

After going back to the log files to see when the errors exactly started i came across over 500 errors in a single day. They were caused by Symantec. Literally 50 a second for ten minutes these errors were logged, i paged through them and it took me forever.

Activation context generation failed for "C:\Program Files (x86)\Common Files\Symantec Shared\coShared\Browser\2.0\CoIEPlg.dll".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.

More error logs that may be usefull

Activation context generation failed for "C:\Program Files (x86)\ATI Technologies\ATI.ACE\Graphics-Full-Existing\MMLoadDrv.exe".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.

Activation context generation failed for "C:\Windows\SysWOW64\sirenacm.dll".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.


I finally foun... Read more

6 more replies
Relevance 77.72%

All, excuse my lack of computer knowledge but is there anyone out there who can dumb down an explantion or solution to the barrage of side by side config errors I just started getting whenever I try to run any application (e.g. Office or Photoshop)? I have literally scoured the posts/forums/internet looking for solutions and I think a lot of my problem is I don't know the lingo so the explanations look like they are writtien in Klingon. For instance, one suggestions was to run sxstrace.exe. How the heck do you do that? WHere do you do that? What do you do with the results? The example looked like a bunch of gobblygook was produced. I am sorry to drag this forum down, but maybe there are some tired experts out there tonight who are happy to use minimal brain effort to try to explain how I might resolve this. I appreciate any and all assistance!

Your humble amateur friend,

Betty

Answer:Help for side-by-side config error...not written in Klingon

Originally Posted by Moraga Betty


All, excuse my lack of computer knowledge but is there anyone out there who can dumb down an explantion or solution to the barrage of side by side config errors I just started getting whenever I try to run any application (e.g. Office or Photoshop)? I have literally scoured the posts/forums/internet looking for solutions and I think a lot of my problem is I don't know the lingo so the explanations look like they are writtien in Klingon. For instance, one suggestions was to run sxstrace.exe. How the heck do you do that? WHere do you do that? What do you do with the results? The example looked like a bunch of gobblygook was produced. I am sorry to drag this forum down, but maybe there are some tired experts out there tonight who are happy to use minimal brain effort to try to explain how I might resolve this. I appreciate any and all assistance!

Your humble amateur friend,

Betty



Betty, no worries, you sound just like my friend.

Can you explain the error with a little more detail? When does it occur, what you are doing when it happens? Perhaps a screenshot of the error?

~Lordbob

11 more replies
Relevance 77.72%

For some strange reason my Vista 64 started giving me side by side errors.
Every single 32 bit (Program files(x86)) app give me the error, while any 64 bit apps dont.
Trolling for a few hours I found the most common solution to be installing vcredist_x86 This file wont install it gives me the same error.
So I downloaded vcredist_x64, but this file is built with a 32 bit self extractor and results with the same error. I Tried uninstalling the Visual Studio 05 but it gives me a windows installer can not be accessed.
I have tried using a restore point, I have tried sfc /f and it made a log that I am unable to read.
Is there some trigger that can enable windows 32 bit installs to work and I can install vcredist_x86? Thanks.

More replies
Relevance 76.27%

So recently, I received a blue screen of death. The error was something along the lines of:
page_fault_in_nonpaged_area

When it restarted, windows advised me to perform a system file check. So I left my computer for a bit, and when I came back it was already at the logon screen. However, when I logged on and started firefox, first thing I noticed was that all my bookmarks and some extensions had been wiped.
I then tried to start Microsoft Word but I received the following error:

&quot;The application has failed to start because its side-by-side configuration is incorrect&quot;;

I receive that error for most of my other programs.

When I tried to run event viewer, it says:

&quot;MMC could not create the snap-in&quot;

Please help. Is it possible to restore my applications without reinstalling them all?

Sysinfo Log:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3066 Mb
Graphics Card: ATI Mobility Radeon HD 3650 , 512 Mb
Hard Drives: C: Total - 289804 MB, Free - 64740 MB; D: Total - 15359 MB, Free - 9693 MB;
Motherboard: Dell Inc., 0F237N, A09, .2WZ222S.CN4864395K0725.
Antivirus: Microsoft Security Essentials, Updated and Enabled

EDIT: I ran SCF again. It said it detected corrupted files but when I restarted my computer, I am still unable to run most of my applica... Read more

Answer:Side-by-side configuration incorrect - application errors after System File Check

8 more replies
Relevance 76.27%

When trying to open a number of programmes including Microsoft Works Word processor is "application cannot be opened as side by side configuration is incorrect"

How do I tackle this please!

Answer:Error message: "application cannot be opened as side by side configuration is incorrect"

Hi

To be honest I never meet such problem with the operating system but firstly I would recommend trying to repair the OS.

Boot up the notebook and press F8. Then choose option called Repair the Computer.
Now you will see a some options. Here I would recommend choosing the first option called: Startup Repair.
This option automatically fixes problems that are preventing Windows from starting.
But I?m not quite sure if this is good enough to fix your issue with the system.

If this does not help I would recommend reinstalling this Microsoft Works package.

3 more replies
Relevance 76.27%

My computer specs:
Dell Inspiron 531
Vista Service Pack 2 32-bit
AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ 2.3 GHz
2 GB Memory RAM

I was following a YouTube video and I did everything it told me, but when I do such, I get that "side-by-side configuration is incorrect" message. I've looked and looked through the web, still no luck. Help.
 

Answer:Side-by-side config is incorrect problem

9 more replies
Relevance 76.27%

Have a problem trying to run Win Messenger Live.

I get the followwing error.

C:\Program Files (x86)\Windows Live\Messenger\msnmsgr.exe

The application has failed to start because its side-by-side configuration is incorrect. Please see the application event for log detail

Have uninstalled and reinstalled Win Live. Have followed other threads made sure Microsoft Visul C++ is up to date with no joy.

More replies
Relevance 76.27%

Hello,

tried to follow the other posts to correct this, but, no luck as yet.

I started CMD prompt, going in as administrator, I ran sfc /scannow and it returns with... "windows resource protection could not start the repair service"

I cannot d/load any c++ 20xx redistributables, etc, as code 1935 pops up.

I tried to get around the 1935 code by renaming mscoree. I managed to rename it by taking ownership, but, still could not d/load the c++ files.

I am well out my depth here and have been trying unsuccessfully to overcome these problems, so, any guidence/help would be most appreceiated.

My computer is an HP6720s running Vista32. All my problems started when I installed Bitdefender 2011 total security. Which will not run due to the side by side config. I did purchase a registry cleaner that found lots of issues, but sorted them all as far as I am aware.

Thanks in advance for any help


Ricky

Answer:side by side config / error 1935

Hi,

Look here for some infrmation & try the suggested option: -

Error code 1935 while installing Microsoft Visual C&#43;&#43; 2008 SP1 - Microsoft Answers

3 more replies
Relevance 76.27%

Hi all,
After a sudden computer freeze (during normal net browsing) I have problems with side by side configuration and also Net framework.
The computer starts normally but I get the message from GoogleEUlallauncher:
"impossible to load c:\windows\microsoft.Net\Framework\V2.0.50727\mscorwks.dll"

Then I can not start several applications. they give the message:
"application has failed to start because side by side configuration is incorrect"

Among those applications are: Acrobat reader, AVG (virus), Google earth, Msworks,FSX(flightsim)
The application ADE (Airport Design editor, FSX) gives on start the same message as GoogleEUlallauncher concerning FrameworK.

I have made some research already on your site and found some threads about this side by side
Problem as this one for example:
side by side configuration

So I have already tried to do what is said there.
I have reinstalled (repair) the Microsoft Visual C++ libraries.
I have also tried to reinstall Microsoft.Net frameworK
For Net Framework 2.0 to I got the message that is was part of the system and that it could not be installed. (I use Vista 32 bits)
For Net Framework 3.5 Sp1 I got at the end an error message with code "1603".

I have also done already SFC and SXSTRACE.
You have the logs attached.
For Sxstrace I launched Acrobat,Avg, Google Earth and ADE , in that order.

Would be happy to know if there is a possibility to avoid a reinstall!

I use Vista 32 bits (french edition)... Read more

Answer:Side by Side Config and Net Framework problems

Hi,

If I understand well Sxstrace and Sfc signal the manifest
x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4053_none_516e2e610f48bda6.manifest
as the origin of my problems.

Something seems wrong with the "Noinheritable" in line 3!
Those internet addresses at the end seem also bizarre!

What can be done about that?

I have attached the manifest.

Guy

8 more replies
Relevance 76.27%

I have trouble running a few applications as of late idk why i have tried every combination of vc++ redist versions 2005-8-10-12 and reverse .
Tried reinstalling every version of .net framework 1,2,3.5,4,4.5 etc.
Tried reinstalling the programs with the vc++ redist in the disk.
The problem arises when i try running:-
1. Civilization 5 (Gold box edition)
2.Microsoft Office 2010(pro)
as of now the other programs run fine.
Also seems to affect my usb 3g dongle(huwai).
Would really appreciate help on the matter without quotes or links .
Thanks!

Answer:Side By Side Config Error. Win 7 Ultimate x64.

Please follow the Windows Update Posting Instructions and post the requested data

1 more replies
Relevance 76.27%

Ok I need some urgent help. I cannot start ANY program in my PC all I get is this error message >> .
Even when I download some file I can't start it it gives the same error, so basically 95% of my programs don't work. *** is this?

More replies
Relevance 76.27%

One day Itunes was working fine. The next, I tried to open it and received the "application has failed to start because its side-by-side configuration is incorrect" message. I have looked up other "side-by-side" problems/solutions, but do not really understand the solutions that have been posted. Thank you for any assistance.
 

More replies
Relevance 76.27%

alo people, i recently tried to port scan with Nmap, after typing the target IP, and then hitting 'scan' after a few seconds Nmap comes up with 'the application has failed to launch because its side by side configuration is incorrect...' how can i sort this out? cheers

More replies
Relevance 76.27%

Hi all,

I've booted my computer today and now I am unable to run any program at all, I have read some threads that installing the C++ redistributables can fix this problem but of course I am unable to run those as well, also tried a registry tweak but no change:

"Error: The application has failed to start because the side by side configuration is incorrect"

I've ran 'sfc /scannow' and it's found errors, the logs reads:

Answer:Can't run any .exe files (side by side config error)

Hi, the log failed to be attached.
Could you try again please.
Open Notepad, save the log to it, then save on your desktop, as it may be quite long use these brackets around it [ code] [ /code] then copy and paste into a reply.
Hopefully that should do the trick.
(remove spaces from inside brackets)

11 more replies
Relevance 76.27%

Can Someone please expain what remote technology is being used in a "Side BY Side" configuration, and what is the purpose of installing a virus protection and malware removal if it makes exceptions for the MALICIOUS jerk that keeps remote administering to my MACHINE. Please explain how in the world it got on my PERSONAL PC. AND WHY!!! HOW TO FIX IT AND EXPLAIN HOW TO STOP IT!!I am NOT SUPPOSED TO BE ON a DOMAIN ...but I am a REMOTE download from HELL. A NETBIOS PC ...one would think that would be easy enough to trace ...but I am remoted from a NASTY LOSER and COWARD from HELL THAT HAS TAKEN AWAY ALL OF MY CONTROLS AND ABILITIES FOR FEAR OF GETTING CAUGHT ...BECAUSE IT TURNED OUT I HAD A PRETTY GOOD BRAIN!!! THIS IS SO SICK AND NOT FAIR ....SINCE IT IS MY PC THAT THEY PURPOSELY CRASH and it is NOT FUNNY it IS SAD!!PLEASE HELP! For the last three years, My resumes gone now-where, I apparently applied to "Fake" jobs and companies, and to make matters worse, Aside from MY LADDER money they pocketed, and my other online accounts they screwed up, They took my account off J-DATE, and Pretended that the SIRANO corp was part of that corporation... When it is JDATE is clearly a subsiderary of Match.com. This is a STALKING NIGHTMARE that shows NO sign of Stopping themselves. They have made it impossible for me to use technology, get a new job and to even get a date. EVERYTHING IS DONE ON-LINE ...this is CRUEL, MALICIOUS and MEAN. THIS STALKER is SICK and NEEDS to be relinquish... Read more

Answer:How to remove Side-By-Side remote Config

I was going to tell you how to disjoin the PC from the domain & to run hijack this but after I read that your money was stolen, I suggest that you take the machine to the FBI. How do you know when a politician is lying? His mouth is moving.

15 more replies
Relevance 75.98%

So far I have done this and it did not help:

1. Open an elevated command prompt. To do this, click Start, click All
Programs, click Accessories, right-click Command Prompt, and then click Run
as administrator. If you are prompted for an administrator password or for a
confirmation, type the password, or click Allow/Continue.

2. Type the following command, and then press ENTER:
sfc /scannow
(The sfc /scannow command scans all protected system files and replaces
incorrect versions with correct Microsoft versions.)


FYI, She gets the message when trying to launch the Second Life Phoenix Viewer, however Second Lifes Viewer 2 loads without error.

I am going to perform a CHKDSK on her Lenovo as recommended in an archived thread from this forum and hopefully that will solve the issue. Can anybody think of anything else?

Answer:Experiencing (side by side application error). Need troubleshooting tips

What is the application error? Can you upload a snip

See How to Use the Snipping Tool in Vista For More Information

5 more replies
Relevance 106.19%

I have encountered a very stressful problem, whenever I attempt to open Word (2007), or Excel I get an error message which says:
"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail."
I have been combing forums for the past 12 hours and have attempted several suggested fixes, to no avail. Such as those suggested:
http://answers.microsoft.com/en-us/office/forum/officeversionother-officeinstall/word-2007-will-not-open-it-says-the-side-by-side/5cf5bc15-8ab8-470b-bb99-df26bade6e4f
An

Answer:Side By Side Configuration Error when Opening Word 2007

Don't know if this will help CLICK HERE

3 more replies
Relevance 105.78%

all instructions can be found here at
http://www.howtogeek.com/howto/17342/upgrade-office-2003-to-2010-on-xp-or-run-them-side-by-side/

 

More replies
Relevance 105.78%

This is kind of a pain. I can't find anyone out there except some C++ programmers that really talk about this problem. I have Vista Ultimate, 2 gigs of ram, 2 video cards in SLI, 2.4ghz X2 processor. All of my games and programs work, with the exception of BioShock, and now my windows update. I downloaded the demo yesterday from Steam, and got this messege

the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more details

I thought this was a problem with the Steam download, so I went ahead and purchased the full game of BioShock. Got the same messege. I am really at my wits end. I have been at this since 10am and have gone nowhere... Thank you in advance.
 

Answer:Solved: ..failed because it's side-by-side configuration is incorrect

12 more replies
Relevance 105.37%

How can I open 2 excel files side by side in Office 2010?

Answer:How to open 2 excel files side by side in Office 2010?

See if this helps: Comparing Two Excel 2010 Worksheets Side by Side - For Dummies

1 more replies
Relevance 105.37%

Suddenly out of the blue nothing opens - Am not a programmer and don't understand all this lingo have 4 0r 5 redistributible programs C++ 2005, 2008 etc with all relevant service packs - NO LUCK - this is killing me am looking for work and can't get to my resume can't open any programs at all - adobe, microsoft office NOTHING please tell me how to restore my system files to default and start over
 

More replies
Relevance 104.14%

Good Morning,
I have three identical machines all running Vista Home Premium with Service Pack 2. All three have Office Home and Student 2010 installed. On one machine I have to keep uninstalling and reinstalling Office because I get the side by side configuration error on a random and recurring basis. Is there a permanent fix for this? I have the free upgrade for Windows 7 Home Premium for all three machines but have not used them because I am generally happy with Vista. Would upgrading to Win7 possibly help?
Thanks in advance for any help.

More replies
Relevance 102.5%

I have Office 2007 installed on my computer, and have just acquired Office 2010. Is it possible to install both products side by side as it were before I get rid of 2007?

Answer:Installing Different Office Versions side by side?

Hi basils57,

You may have two installs of Office on the same system without problems; but you can use only one copy of 'Outlook' installed in the system at any given time.

You may want to take a glance at the following 'Microsoft article': Keep earlier versions of Office programs when installing Office 2010 - Excel - Office.com for more details.

Hope this helps.

9 more replies
Relevance 98.4%

I presently have the tired out though reliable Office Pro 2007 on my PC but have also downloaded the Trial 60 Day Version of Office 2007 (NOT the upgrade - the full version).
tCan I run/open this latter one and save it to a new direcvtory under Program Files noi worry about it interferring with the old 2002 one?

Wonder if I can also import all the data such as Calendar/Contacts etc. to the new one without stuffing things up?

Hate to uninstall the 2007 one and find the 2002 one is goosed!!
Ooooops, heading should be run and not dun!!!
 

Answer:Can I run two MS Office systems side by side?

You can have both installed on the PC at the same time. I only application that I have seen issues with is Outlook. Be aware if you switch between versions you will typically go through a configuration process which will slow down your productivity as well.
 

3 more replies
Relevance 95.94%

The application has failed to start because its side-by-side configuration is incorrect error on a HP G60-237NR notebook with vista home premium 32 bit OS, 3GB ram, SP2, using mozilla firefox 4.0.1

----------------------------------------------

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3002 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1309 Mb
Hard Drives: C: Total - 294097 MB, Free - 141516 MB; D: Total - 11143 MB, Free - 1860 MB;
Motherboard: Wistron, 3612, 09.54, 2CE850435T
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

More replies
Relevance 95.94%

I recieve this error.
"application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
When trying to start QQ, the instant messanger of Asia.
It worked very well with win XP, ive heard of other Win 7 Using it sense 7 Beta.

It was freshly downloaded and installed. I tried running in XP sp2 sp3 compat modes.

No luck.

any other ideas on how to fix

""application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.

?

Answer:QQ X_x (^ ^ ) -side by side config

  
Quote: Originally Posted by robcardiv


Please see the application event log


Maybe you should do what the error message is telling you to do and, um, check the application event log. You'd be surprised at how helpful that could be.

My psychic debugging powers also tell me that when you do check the application event log, it will probably indicate that you are missing a VC runtime, and that the error can be rectified if you just install these two packages.

7 more replies
Relevance 95.53%

Hi Lorien

I just joined the Forum in hopes I can find some solution to my "side by side configuration" problem in Office 2010. I saw your earlier posts and tried to no avail. Lots of time ahead this weekend hoping to find a fix - perhaps I should be redirected to a different forum?
Thanks,

Peter in Michigan

Answer:"side by side configuration" problem in Office 2010

Hello, and welcome to the Vista Forums!

Please have a read through this older thread by me. side by side configuration

Try Lorien's advice, then mine, for the first two answers. If that does not solve the issue, keep going with my advice, and post an SFC log (sfcdetails.txt), and the sxstrace.txt.

Also, could you give us just a few more details. I assume that the error message is "The side for side configuration is incorrect. Reinstalling the application may fix the issue" Can you please confirm that, and that it occurs for Microsoft Office only, as far as you are aware.

Thanks!

Richard

6 more replies
Relevance 93.89%

I have a complicated problem, at least for me. I get side by side configuration error when trying to access any program. I followed some post about uninstalling C++ programs but then i get the 1719 error. I then tried to download a few programs that were suggested but i get the side by side configuration error. Can anyone please help me??? I have some important documents that i didn't get a chance to back up and would like to be able to fix my laptop problems without having to wipe out my hard drive

Answer:side by side config. error and 1719 error

Hello,
If OS re-installation is an option to you, boot PC with Ubuntu Live CD, copy your data to Flash, external HDD or network PC, and make system re-installation.
side by side configuration error -> C/C++ run-time library conflict. Caused with some third party software or MS Visual Studio. If you use some kind of software i had mention try to re-install it.
Good lack.

1 more replies
Relevance 86.92%

T60p running WinXP - arrow keys "shift" screen side to side instead of moving cursor ; happens in Notes and Excel.  How do I reset to "normal"?

Answer:T60p - arrow keys "shift" screen side to side instead of moving cursor

Try to turn off scroll lock (key named "ScrLk") -gan

1 more replies
Relevance 86.92%

When I'm reading a message I have to scroll right to see the rest of the sentence. Is there a way to show the entire message in one window?

Thanks
 

Answer:Solved: Remove necessity to scroll side to side in order to read text.

11 more replies
Relevance 86.92%

G'day everyone - I suspect this issue will be a tough one to get help with!

I've attached a screen-capture of a Microsoft Office Excel 2007 spreadsheet I'm working on at the moment. As you will be able to see on the screen-capture, I've marked the areas of interest and will explain here...

When I enter a name in this column (marked as '1'), I want the spreadsheet to check another column (marked as '2') to see if there is a match. If there is a match, I then want the spreadsheet to check the column marked as '3', and subtract that amount from the column marked as '4'. If there is no match between the column marked as '1' and the column marked as '2', I don't want anything to happen.

I hope that made sense, and if anyone can help me with a solution here, I would greatly appreciate it.
 

Answer:Solved: Calculating Side-By-Side Cells Dependant On Text Entries In Excel

8 more replies
Relevance 86.92%

When I insert a flash drive into one of the dead ports, initially the message pops up indicating that the computer recognizes something has been inserted into the port, but then it immediately disappears and the port is dead. I went to Device Manger-->Portable Devices and tried to fix one of the three dead ports. At some point (after I scanned for hardware changes, I think) it did show the drive letter, but it had a yellow triangular error-message  indicator. I right-clicked and selected Properties, and it said "This device cannot start (code 10)." Then the drive letter disappeared, though it has come back sporadically. I hope this is clear. Would appreciate any ideas. Thanks. Jane Doe 

Answer:E545--USB ports on left side of computer all died at once, but port on right side is still working

I also noticed this problem. Only the USB port nearest the rear is working. Even when I boot into the BIOS with a USB drive attached, only that port enumerates anything.

1 more replies
Relevance 86.92%

Problem: I'm trying to retrieve a client-side <form> element value into a server-side variable. The code works if I explicitly set strCCLastNameValue = (a data value in the db table column "care_Contact_Last_Name" such as "Jones"). I hope I have explained the situation adequately. Thanks for any suggestions on resolving this issue.
Here's the code in an asp file...
============================
<script language="VBScript">
Sub prepop()
<%
Dim dbConn, oRS, sSQL, strCCLastNameValue
strCCLastNameValue = document.getElementById("careContactLastName").value 'THIS IS THE LINE THAT IS GIVING ME PROBLEMS
Set dbConn = Server.CreateObject("ADODB.Connection")
dbConn.Open "Provider=SQLOLEDB;Server=MYServerurl;Database=wpgXXXXX;NetworkLibrary=DBMSSOCN;UID=XXXXX;PWD=YYYYYYYY"
Set oRS = Server.CreateObject("ADODB.Recordset")
oRS.CursorLocation = 3 'adUseClient
With oRS
.ActiveConnection = dbConn
.Source = "SELECT * FROM CareMinistry WHERE care_Contact_Last_Name= '" & strCCLastNameValue & "'"
.CursorType = 0
.LockType = 3
.CursorLocation = 3
.Open
End With
oRS.MoveFirst
%>
'Then fill the <form> with the selected row.
document.addform.entryStatus.value = "<%= oRS("entry_Status") %>"
document.addform.entryCategory.value = "<%= oRS("entry_Category") %>"
document.addform.entryDate.value ... Read more

Answer:Solved: problem setting server-side variable from client-side sub

6 more replies
Relevance 86.92%

I have a spreadsheet that has nine columns. Once of these columns (the fourth column) is used for a single character as a method of immediately letting the user know that the row in particular is different to the others. So, there's nothing different about that at all.

What I'd like to be able to do, though, is to have the other eight columns (the three columns before the column mentioned above and the five after) all change their background colour when the single character is entered in the fourth column.

So, if the user inputs data in a new row and leaves the fourth column cell blank, nothing happens. If the user enters the symbol (let's say it's a "#"), then the nine columns will all change their background colour to red.

If anyone can help me with this, I'd greatly appreciate it.
 

Answer:Solved: Formatting Side-By-Side Cells Dependant On Single Cell Value?

6 more replies
Relevance 86.92%

First post...

I am coming to you as a last resort. I built my own PC and installed Vista Ultimate 64 bit OEM edition. Has been working fine for ~2 years.
Now every time I attempt to open a program I get the error "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail".

The only progam that is barely working is IE 64 bit edition. I cannot download or run any files.

Microsoft wants 59$ to speak to a technical support representative(What a joke, multibillion dollar company wants extra $ for tech support??...).

Doing a ton of research I have tried various things to remedy this with no avail. System restore did not work. Doing a sfc /scannow in command prompt does not work, it does not even run. Wasted 3 hours of my life doing a thorough checkdisk as well.

The error in the event log is as follows...
Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_microsoft.windows.c..-controls.resources_6595b64144ccf1df_6.0.6001.18000_en-us_72e6f33f34dfabb9.manifest" on line 18. Invalid Xml syntax.

So the problem has to do with this manifest file? I really am clueless as to my next move. I can not download and run anything at all.... Can I do a Vista repair installation with my OEM version?

Should I try and get my hands on a cheap upgrade version of Windows 7?

Answer:Vista x64: Side by side configuration error, no programs work halp :(

Welcome
Until our Forum expert in this area, Niemiro, comes on line, maybe this will give you a lead.
side by side configuration

16 more replies
Relevance 86.92%

I have an Inspiron 5545 running win10.
On opening, the right side hinge on the keyboard section pulled three screws and inserts free, cracked the plastic in the corner where the hinge is located, killed the WiFi, and caused an intermittent vertical line to appear on the screen.
The laptop has never been out of  the house, never dropped, and seldom left my lap when I was home.
It runs, but is held together with aa 1.5" black paper clamp and connects to the home network via a USB WiFi dongle from Wal-Mart..
This is my fourth or fifth laptop and the first to have the case fail.  This is a design failure in my opinion.  Boo on you, Dell.  I've bought a lot of your computers over the years because they worked and did not fall apart with normal use.  This one disappoints.
Rev. William J McVay, D.D.

More replies
Relevance 86.92%

With the introduction of the new and clever 'Snap' functions, two basic functions for organising the desktop seem to have been lost. I and others have tried asking the MS Community, but are struggling to find the vocabulary needed to ask the question, and are getting only non-answers.
So, I will try here..Questions:Noting that these very basic features have been available in all previous versions and editions of MS Windows:
1. How do I now, in W10, get two desktop app windows (DAWs) to share the desktop equally? This used to be achieved by having two DAWs active, and then selecting 'Show windows side by side'. Now, in W10, selecting 'side by side' results only in a cramped tiling of active windows.
2. How do I now, in W10, get DAWs to 'remember' their last setting of size and position, such that re-opened DAWs will open with the same size and position that they had when last closed?
3. Could someone give a direct answer to these two questions, providing the solutions as steps to be taken in W10 - or, will someone confirm that these features are no longer available, in W10?
Two windows, one desktop, i.e.: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
x..................x..................x
x..................x..................x
x.......App1.......x.......App2.......x
x..................x..................x
x..................x..................x
x..................x..................x
x..................x..................x
x..................x..................x
xxxxxxxxxxxxxxxxxx... Read more

Answer:Updated: W10 App Windows: 'Side by Side', & Setting Default Size/Position..

If you drag App1's title bar all the way to the left side of the screen, it'll "snap" to the left. The same for App2; drag the title bar all the way to the right side of the screen for it to "snap" to the right. (This can also be done using the keyboard short cut "Win + left/right arrow")
The old function for right clicking on the task bar and selecting "cascade windows, show side by side, etc" is still there, but now it allows for more open windows, and depends on your screen size.
As far as I can tell, open windows do remember their last position.

4 more replies
Relevance 86.92%

i cant open my windows live movie maker due to Side by Side configuration error. Can anyone help me?

Answer:Windows Live movie Maker Side by Side configuration error

Isn't that a Win 7 app?

1 more replies
Relevance 86.92%

Model:  HP Pavilion m6 Notebook PC 15".   Laptop used minimally and still in beautiful shape other than these noted issues:  Left hinge is broken away from plastic casing (see pic) and Right hinge is broken away from lid plastic (see pic).   From what I'm reading, it seems the plastic base, chassis, and possibly lid base and hinge need replaced.  Please let me know what HP is offering as far as replacement parts and repair.  This seems to be an ongoing issue with HP notebooks.  I've purchased a total of three HP notebook/laptops over the past four years so I'm very concerned about these issues and why HP has allowed it to continue for so long and across so many different models.  It seems to me the plastic used in making these parts does not have the tensile strength required in notebook/laptop use.  I would think this issue would've been corrected years ago and not have continued.  Please advise.  I do love all my HP laptops other than these issues.   Thank you. 

Answer:Left Side Hinge Plastic Casing Piece Broken and Right Side L...

@Awell

 

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).

If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.

Thank you for visiting the HP Support Forum.

1 more replies
Relevance 86.92%

Hi all,
I wounder if some can help me please
I have an error message coming up on all 32bit application that says “the application has failed to start because its side-by-side configuration is incorrect.”
I have done a lot of searching and found that most say I have to uninstall Visual C++ then load an update from Microsoft. That’s great but the side by side error won’t let me uninstall or install anything
I ran sfc /scannow and it found some error and did not fix others The log is below
I hope someone can help
Code:
CBS log
2013-03-28 16:10:08, Info CBS Starting TrustedInstaller initialization.
2013-03-28 16:10:08, Info CBS Loaded Servicing Stack v6.1.7601.17592 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\cbscore.dll
2013-03-28 16:10:10, Info CSI [email protected]/3/28:05:10:10.05 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee84ef0ad @0x7fee87a9849 @0x7fee87734e3 @0xff32e97c @0xff32d799 @0xff32db2f)
2013-03-28 16:10:10, Info CSI [email protected]/3/28:05:10:10.07 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee84ef0ad @0x7fee87f6816 @0x7fee87c2aac @0x7fee87735b9 @0xff32e97c @0xff32d799)
2013-03-28 16:10:10, Info CSI [email protected]/3/28:05:10:10.07 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee84ef0ad @0x7fef5478738 @0x7fef5478866 @0xff32e... Read more

Answer:Side by side error stopping all 32bit apps and many window's fucctions

Hi scott and Welcome to Seven Forums.

Did you try to boot into safe mode? Or even better a system restore?

6 more replies
Relevance 86.92%

Hi,
I recently bought my Dell XPS 9560. My dell xps screen appears cooler on the left side and slightly warmer on the right side. It is not noticeable in any color but when I visit websites with a white background like google, I can notice that the right side is slightly warmer (yellowish) which is distracting. Any idea on how should I proceed with the issue?
Thanks

Answer:Dell XPS 9560 Screen - left side cooler and right side warmer

If "recently" is less than 21 days from shipment and from Dell directly, the best option is to contact customer support and have the system replaced.
If it's more than 21 days from shipment, the warranty will cover the display replacement, which is the only solution -- though if the system is new enough, you're better off having it replaced than repaired.

1 more replies
Relevance 86.92%

I bought a Dell Inspiron 5545. From the first day I lifted the screen of the laptop, there was a click from the right side where the hinge of the screen meets the base of the laptop. I just assumed this was something internally that kept the screen in the open position because there are so many other items click when you open them. However, over the past few weeks a gap started to appear that has become increasingly larger between what appears to be the bottom of the case and the top in that same place where the right hinge is.
C'mon Dell.  It is a design flaw and should be fixed as such.

More replies
Relevance 86.92%

When I try running windows live messenger, I can't even start it. I get this error message.
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.

How do I change the side-by-side configuration of the application so it works correctly?

Specs:
Dell Inspiron 1720
Windows Vista Home Premium (32-bit OS)
Intel Core 2 Duo T7300 2.00GHZ
2 Gigs of RAM
NVidia Geforce 8400M GS
220GB Harddrive
 

Answer:Sid-by-side config error

From this, it doesn't appear that it is supported in Vista
http://join.msn.com/messenger/requirements2000
 

1 more replies
Relevance 86.92%

Hi everyone, Has anyone noticed any issues with their W530 hanging when picking the unit up or applying slight pressure on the bottom right side while typing? My video sometimes goes haywire when this happens and its a telltale sign that my system is locked up.  I think i may have a damaged mb internally but just wanted to see if anyone else has seen this same issue or something similar.  Thanks!

Answer:W530 Hangs when slight pressure applied to bottom right side or picking laptop up from that side

Reseat the ram and hdd.

3 more replies
Relevance 86.51%

Hi there,

So in XP one was able to select open windows from the taskbar via holding CTRL and left clicking on each one, then right clicking and tile / arrange vertically the selected windows...

In windows 7 I cant seem to do it automatically. Yes i can do it manually with three or more windows, but i shouldnt have to.

I cant get three or more windows to tile next to each other, i can only get two windows to go side by side via the snap feature.

Any ideas on how to get three or more windows side by side semi-automatically?

Thanks for reading.
 

Answer:Window snap - How to get three or more windows arranged vertically side by side?

7 more replies
Relevance 86.51%

Hey Guys,
I have a problem.   Last night, i was up all night, using my pc. I had quite a few tabs open (using chrome), and every once in a while, the cpu had a lot of Work to do, so the pc would respond more slow. During one of these slows, something different happened. Quite a lot of icons just turned into one of the old school Windows icons, most (if not all) of them being .exe files. I wanted to fix all of this, so I used Bullguard, and after that i wanted to use CCleaner. CCleaner didn't Work. Neither did the other programs. They gave me an error in the lines of:

"This version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) verion of the program."

Also, whenever i shut down my computer, or boot it up, an error pops up from LogonUI.exe:

"Error: C:\program files\common files\microsoft shared\windows live\wlidcredprov.dll is either not designed to run on windows or it contains an error"

I figured out how to fix this part. I simply installed Windows Live Essentials.
 
And when I open Google Chrome, it just gives me another error. It says that the side by side configuration is incorrect.
I tried uninstalling MyWinlocker but, it is still running in the system tray. I tried looking for a process called mwl.exe, but I can't find it.
 
Also, whenever the computer boots up, I am also greeted with a certain window. It's the window th... Read more

Answer:Bunch of errors - side by side configuration, version compatibility, etc.

Please run System File Checker
 
The sfc /scannow command scans all protected system files and replaces corrupted and incorrect versions with correct Microsoft versions.
 
Click on the Start orb and then type cmd in the Search programs and files box.
 
In the pane above the search box Programs will appear with cmd below it, right click on cmd and choose Run as administrator.
 
If you are prompted for an administrator password or for a confirmation, enter the password, or click Allow.
 
This will open the Elevated Command Prompt, it will look similar to the image below.
 

 
Type in sfc /scannow and then press Enter to start the scan.  Please notice the space between sfc and the /scannow.
 
If the scan finds no integrity  problems the scan will stop.  Type in exit, then press Enter to stop the scan.
 
When the scan is finished please post the log of this scan.
 
To find sfc /scannow log, type cmd in the Search programs and files box. 
 
cmd will appear above the search box under Apps., right click on it and choose Run as administrator, this will open the Elevated Command Prompt.  This will look simlar to the image above.
 
Copy and paste the following in the Elevated Command Prompt, then press Enter.  
 
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt
 
This will place a new icon on the desktop titled sfcdetails.  Double click on this ic... Read more

13 more replies
Relevance 86.51%

Error Message:The application has failed to start because its side-by-side configuration is incorrect.  Please see  the application event log for more detail. Looked at the event log but did not understand the info provided.  Also got error on PWRMGRV.OCX when clicking on Power Manager. Am not sure how this resolve these? Got my T61 today and did some cleanup.  Deleted Microsoft Office 2007, Microsoft Server and some other non-Thinkpad utilities.Message Edited by yvrwindsor on 04-07-2008 11:45 PM

Answer:At Vista startup, PWMTR32V.DLL side by side configuration problem

This was the error.Activation context generation failed for "C:\PROGRA~1\ThinkPad\UTILIT~1\PWMTR32V.DLL". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0" could not be found. Please use sxstrace.exe for detailed diagnosis. Found the answer. <http://forums.lenovo.com/lnv/board/post?board.id=T_Series_Thinkpads&message.reply_to_id=4695> Download Microsoft Visual 8.0  <http://www.microsoft.com/downloads/details.aspx?familyid=200B2FD9-AE1A-4A14-984D-389C36F85647&displa...> and it worked.

6 more replies
Relevance 86.51%

So my issue is that when I log into my computer it will some times (not all the time) revert from a side by side multi monitor setup to a over under setup. Like if you go into screen resolution settings I will have it set to monitor 1 on the left, and monitor 2 on the right, then when I lock the computer and then log back in, it will have monitor 1 positioned over the top of monitor 2.

I'm thinking there is possibly a default that it keeps going back to, but I'm not sure where I would look for that, other than the screen resolution settings. Another possibility for the origin of this problem could be Microsoft User Experience Virtualization Agent, which we have installed on all our computers here to synchronize the various setting we have connected to our profiles. It looks like UEV might synchronize monitor layout settings, and with that it could be some how defaulting on an over under set up. Overall I am unsure of what to do about his.

Any one have any ideas?

More replies
Relevance 86.51%

Hello Richard,

I've run a scan and the result appears encouraging:

"Windows Resource Protection" did not find any integrity violations."

Attached is a copy of the results: sfcdetailsFrancaBB.txt

I'm moving on to the sxstrace ... according to Lorien's directions.

George

Answer:Side-by-side configuration error after Quicken 2010 upgrade

Hello George!

Well done on creating a new thread. Thanks for that!

Well, nothing wrong in the SFC log. That has got to be good - as long as we get a lead from one of the other logs!

Thanks for continuing on. I am afraid that I can do nothing until I get those other logs, as that SFC logs showed nothing wrong.

Again, thank you, and the very best of luck!

Richard

8 more replies
Relevance 86.51%

Title says it all. I tried to have a Chrome window and a Spreadsheet showing side by side but it doesnt work. It works fine with IE9 and Firefox. Is this the case or is there a setting in Chrome I can change? Or is this a Windows 7 fault??
thanks
h

Answer:Show Windows Side By Side .... doesnt work with Chrome?

If you use the windows key and the right or lef arrow key on an open window that shortcut will move the window to the left or right side depending on which arrow key you have used.

2 more replies
Relevance 86.51%

I downloaded and installed Ubuntu and sectioned off a part of my hard drive for it. I intended to have it set up to run both windows 7 and linux together and let me choose which boot disk I wanted to use at start up. Ubuntu took over and so I read through some forums online. I can now get to the Windows 7 loading screen but it freezes there. I have my install disc and was hoping someone could assist me with getting windows 7 back. I do not care if I loose Ubuntu. I am currently sitting with the Administrator: X:\windows\system32\cmd.exe from the System Recovery Options Menu with my Windows 7 Disc in the tray. Any assistance would be greatly appreciated (if i can save my HD great if not I can live with that).

Tavious

Answer:Unable to boot Windows after installing linux to run side by side

You'll need to boot System Recovery Options to run Startup Repair repeatedly.

Make sure the Win7 partition or its 100mb System Reserved partition (preferred) is marked Active first: Partition - Mark as Active (Method Two)

If this fails after three separate repair attempts with reboots using DVD or Repair CD, boot free Partition Wizard bootable CD to doublecheck which partition is set Active, then click on Win7 HD to highlight it, from Disk tab select Rebuild MBR, OK, Apply, reboot.

If Win7 doesn't start, boot DVD/Repair CD to run Startup Repair 3 times again.

If these fail, change the Active flag to Win7 partition if it is on SysReserved. Try Rebuild MBR and if necessary Startup Repairs again.

Linux can corrupt Win7 beyond repair so you may need to copy out your files using Win7 disk or Paragon Rescue CD: Copy & Paste - in Windows Recovery Console

Then run full Factory Recovery from its partition at boot, or using disks you've made or order, or use the Win7 Install DVD to clean reinstall following these steps: Reinstalling Windows 7

2 more replies
Relevance 86.51%

Hi Everybody!!

I'm trying to make a video of multiple videos I have and combine some of them into one frame side by side onto a single video.

For example...

I have two perspectives filmed from this concert I went to. Me and my friend used separate cameras. Now I want to display both camera views onto one window and show them both playing at the same time but showing the different views.

Know what I mean?

I am not familiar with video editing so I am can't figure out how to explain the desired result I am after. So I am not sure if I am making sense. LoL

I can't seem to find what I'm looking for cuz I don't think I'm using the right keywords. I'm also hoping to find a program that does this for free.

Does anybody know of any program like this or anything about the desired effect I'm trying to obtain?

Thanks so much for listening!!

Have a good one!
 

Answer:Is there a program that lets you show two videos at once side by side in same frame?

Re: Is there a program that lets you show two videos at once side by side in same fra

This looks superb for what you are trying to do...

http://www.youtube.com/watch?v=hNgeuB-32e4&hd=1
 

11 more replies
Relevance 86.51%

So my issue is that when I log into my computer it will some times (not all the time) revert from a side by side multi monitor setup to a over under setup. Like if you go into screen resolution settings I will have it set to monitor 1 on the left, and
monitor 2 on the right, then when I lock the computer and then log back in, it will have monitor 1 positioned over the top of monitor 2. 

I'm thinking there is possibly a default that it keeps going back to, but I'm not sure where I would look for that, other than the screen resolution settings. Another possibility for the origin of this problem could be Microsoft User Experience Virtualization
Agent, which we have installed on all our computers here to synchronize the various setting we have connected to our profiles. It looks like UEV might synchronize monitor layout settings, and with that it could be some how defaulting on an over under set up.
Overall I am unsure of what to do about his. 

More replies
Relevance 86.51%

On quite a few different programs, i'm getting the error message:

"The application has failed to start because its side by side configuration is incorrect. Please see the application event log or use the command line sxstrace.exe tool for more detail"

I've read so many forums online where people have had a similar issue, but nothing has been helpful. The most common suggestion is related to VisualC++ but when i installed it, I got the same error! I tried running it without saving, then I saved it and tried running it, again the same error.

I've opened the event viewer, theres quite a few 'sidebyside' error messages, but I dont know what to do with any of that information. The first side by side error is this one:

Microsoft.Windows.Common-Controls,language="&#x2a;",processorArchitecture="X86",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0"
C:\Program Files (x86)\Microsoft Silverlight\4.0.50524.0\Silverlight.Configuration.exe

I havn't a clue how it started, my computer was fine yesterday, I opened it today to these errors, I tried rebooting but it didnt help.

If any more information is needed, I'll provide what I can.
Thanks

Answer:side-by-side configuration is incorrect error on multiple programs?

Follow the instructions here http://support.microsoft.com/kb/929135 to install VisualC++

3 more replies
Relevance 86.51%

I sometimes find that some pictures look more or less the same & like to compare them side by side to see which I like best.

More replies
Relevance 86.51%

I have Vista. When someone sends me an Adobe document I can't open it. The error message says that my side by side configuration is inaccurate. If I save the document to my desktop, I can then open Adobe and open it from there but it is a hassle. Why can't I just open the document from the source?

Answer:Adobe Reader - side by side configuration is inaccurate error

Latest version of Acrobat? Tried uninstalling and re-installing to see if it fixes it?

Didn't do something silly like use a duplicate file utility or remove things from the WinSxS folder?

Better option, use Foxit instead,

Foxit Software - Foxit Reader for Windows

2 more replies
Relevance 86.51%
Answer:What free photo viewer will allow me to view with two or more pictures side-by-side?

Chasys Draw IES allows working with layers and WildBit Viewer can compare photos side to side.

1 more replies
Relevance 86.51%

After I reinstalled Windows XP Home on a P4 2.4 G computer and checked Quick Launch in Taskbar & Start Menu Properties, I double clicked the Quick Launch divider in error, and Quick Launch displayed on the second row of the Taskbar.  I was finally able to get Quick Launch on a single row of the Taskbar.  However, it is now on the right side of the Taskbar, and I have not been able to move it to the traditional left side.  While it does not create an operational problem, I am accustomed to Quick Launch being on the left.  Quick Launch is not locked.  How can I get it back to the left side of the Taskbar, with open programs showing on the right?

Answer:Move Quick Launch From Right Side To Left Side Of Taskbar

Click and drag the divider, that should move the toolbar about.Just drag it to its normal position.It works for me, anyway.Hope this helps.

3 more replies
Relevance 86.51%

Is there such a program that will force any video or video game(executable) to display in SBS image? I would like to use this program to play video games from my pc on my GearVR unit. I feel like this shouldnt be too hard to do overall. I know apps like this exist for mobile. I want something like this for my pc. Please help, I beg of you.

More replies
Relevance 86.51%

I just came home from work and there was a power failiure while I was working. I turned my computer back on and went to open Google Chrome, but this message appeared...

"The application has failed to start because its side by side configuration is incorrect. Please see the application event log for more detail."

I have no clue what this means or what to do. I'm using safari at the moment and went on google and all the instructions look really confusing. I know VERY little about computers and the terms and what not. So any help would be greatly appreciated.

Thanks,

Answer:Help! Cant Open Google Chrome. Side by Side Configuration Is Incorrect.

If this "repair" does not work I would try a restore point if you have a recent one.

Message: The application has failed to start because its side-by-side configuration is incorrect. | Chief Architect Knowledge Base

Basically for Vista it is open Programs and Features from Control Panel, scroll to chrome and click Repair.

1 more replies
Relevance 86.51%

I am using a 30" at 2560x1600. Each time I open Word Perfect X3, and open 2 documents, I have to resize it to fit approx. 1280x1600 for each document..

Now, if WordPerfect X3 itself is opened at 1280x1600, and I open 1 document, no problem.

But if I launch WordPerfect X3 to 2560x1600, then open 2 documents, I run into the above problem, so I have to spend time to resize them every time.

Should WordPerfect X3 automatically memorize the size setting of 2 document?
 

More replies
Relevance 86.51%

I have extensively searched these forums for a solution to my problem but can't find it. I have found some similar problems, but none exactly the same, here is what happened:

I have a Windows7 computer running just fine. I pulled the hard drive out of my old computer and had installed it in the new one and it seems fine. I can access both drives and i all my files are there. The problem i am having is that i can't open any files from my old hard drive if the program they need to open is also on that old hard drive.

For example, my old hard drive has AutoCAD on it, my new hard drive doesn't. When i click on AutoCad i get the annoying "The application has failed to start because its side-by-side configuration is incorrect" message. This happens with lots of programs, not just AutoCAD. I have MS Office on the old hard drive but when I try to open a word or excel file it won't open. It's like the computer is trying to open files from my old hard drive with applications that are on my new drive. This is a problem because i cant afford to buy 2 copies of autoCAD and 2 copies of MS Office and 2 copies of every program i have.

I feel like there is a simple fix for this but i can't figure this one out.
Thank you for help!!!!

Answer:Installed 2nd hard drive....side-by-side configuration incorrect

Hi welcome to the forum.

to my knowledge you will need to reinstall the programs as you cant use programs that are installed on the hard drive from another computer as it will have writen registry items when the program was installed.

i'm sure someone will correct me if i am wrong.

6 more replies
Relevance 86.51%

This is a VERY interesting read. It is amazing what they have changed in the last few months.
You may only see this dialog window once or twice, but Microsoft wants to get it right. The Vista-like (Aurora) background has been replaced with a light blue one that we've seen on Windows.com. All the text has been changed as well. "Find out what's new in Windows 7" is now "Go online to find out what's new in Windows 7" and "See more new features" is now "Go online to learn more." Furthermore, the "Learn more about new Windows 7 features" has been replaced with two bullets:
* Discover new features that can help you be productive, stay safer, and have fun
* Find out everything you need to know about setting up your computer
Read More: Side by side: UI changes from Windows 7 beta to build 7057 - Ars Technica

Answer:Side by side comparison of Windows 7 Build 7000 & 7057

Its an exhaustive article; lengthy but worth reading. Strange, in the Start Menu, Microsoft has decided to put Computer & Games together in build 7057. Wonder why !?

5 more replies