Computer Support Forum

Toshiba l300D wont load up after bios update fail

Question: Toshiba l300D wont load up after bios update fail

I had to update my bios & it seems that the wrong one was downloaded about 3% into installing the laptop just died & won't go back on.

There are no lights & there is no noise from the laptop at all.

Any ideas on how I can fix this?

The laptop is a Toshiba satelite L300D.

Relevance 100%
Preferred Solution: Toshiba l300D wont load up after bios update fail

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Toshiba l300D wont load up after bios update fail

It doesn't sound like it is fixable on your end. Flash BIOSes that go bad, leave you with a doorstop. You'll hear the statement, "I bricked my computer". This means you turned your device into a brick also known as a doorstop.

You might want to post at a good BIOS site

People do send bricked computers off, have the BIOS chip desoldered and a new one soldered on. You might be able to get information on that type of service.

Maybe if you contact Toshiba, they will be able to tell you of some companies that do this.

2 more replies
Relevance 91.43%

I had to update my bios & it seems that the wrong one was downloaded about 3% into installing the laptop just died & won't go back on.

There are no lights & there is no noise from the laptop at all.

Any ideas on how I can fix this?

The laptop is a Toshiba satelite L300D

Answer:Satellite L300D - Won't load after BIOS update


Well, if BIOS update crashed you can do nothing because the ROM module must be reflashed. This can only be done with special tools and only an authorized service provider has such tools.

So please contact nearest Toshiba service and ask for help :)

1 more replies
Relevance 83.23%

Hey all. I am fairly well with computers, but this one has me stumped.

My toshiba satellite l455 laptop running windows 7 home premium 64 bit turns on (i can see all the lights blinking) but nothing appears on the screen. It is just black.

Here is what happened.

The left clicker on the trackpad broke off and slid under the computer (where the motherboard is etc...).This happened while windows was running. Then the screen went bezerk and random colors started flashing across the screen. So i turned it off, put the left mouse part back in place, but now when i turn it on i just see the blinking lights that indicate wifi, the computer is charging etc.... but the screen does not load. Just a plain black screen.

And what really sucks is 2 weeks ago i just purchased a new hard drive because the old one was broken. It was like 60 bucks.

The computer has good hardware (250 gb hdd, 4 gb ram etc...) and i dont want it all to go to waste. The computer is also fairly new.

Does anyone know what i can do to fix this???

Answer:Toshiba bios wont load????


9 more replies
Relevance 79.13%

Hello. My aspire 4752g wont boot after the bios update was interrupted. I just finished formatting my laptop and decided to reinstall the drivers but ended up i flashed the bios instead. As i was updating the bios, it stays in "blank screen" for quite a long time and i was so worried that i decided to force shutdown the laptop. When i try to boot it again, it stays in 'blank screen' with power indicator on and fan running. Are there any solution for my problem? Pls help me. Im using windows 7 home premium with 4GB x 2 sticks of RAM installed. Thank you in advance.

More replies
Relevance 75.44%

Ok so i decided i would update my BIOS as i saw there was a new BIOS available at the dell website

I have a Inspiron 1100 2.2Cel, 512 Ram, 30GIG
I had a A29 BIOS and was updating to A30, So i downloaded and started the BIOS update it starts installing and has to restart as it restarts all is fine till it gets to the windows splash screen and it comes up with a certain boot file is missing in system32 ( I didn't get chance to see the specifics as i wasn't expecting a problem) and then straight away it restarts so the BIOS didnt finish installing and from then on it simply just keeps restarting at the splash screen

So i thought i would try Safe mode but the same problem, I then try putting my XP cd in and repairing the windows but still no luck so then i went and instaled a second XP which is now working fine, which relieved a bit as the Computer parse is working just not the original Windows

I now have access to the other windows install to be able to put the missing files in, But my main concern is getting "My Documents" as i have a lot of college stuff which isn't backed up on my USB drive, And when i go to get access it comes up with access denied because it's private

I have tried This
still didnt help

Tried copying some system32 files from the fresh install to the old see if the file might missing might have been added but still no luck

I did a virus scan and the scanner was able to scan the files in the "My Docume... Read more

More replies
Relevance 73.8%

Hi, since I couldnt use SRT i read that it maybe from an old BIOS so i decided to update. I looked for Y570 2.8 ver. and I installed. there was an error but automatically restarted, after restart  wind?ws didnt load and instead I  got some colored boxes. WHat should I do to fix it besides guarantee

Answer:After BIOS update Windows wont load, instead few colored boxes

Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,  
 Based on what I read from your post, Since there was an error reported during the Bios upgrade, it might have corrupted the bios, please contact local support center to get system verified
Do give this a try and let us know
Hope This Helps

WW Social Media Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!How to send a private message? --> Check out this article.

                        English Community   Deutsche Community   Comunidad en Español

1 more replies
Relevance 71.34%

hi guys what could ido my laptop is not loading past the toshiba screen.could i wipe the computer completely and reinstall windows xp ?? thanks

Answer:toshiba m200 laptop wont load past toshiba screen.

Will it start in safe mode.Just keep tapping F8 as the computer starts.If so maybe a system restore or a last good configuration.

10 more replies
Relevance 71.34%

I tried to update my BIOS on my T530 today.  Tried both 2.07 and 2.50 (I'm running 2.04).  I'm using the Windows app, not the BIOS CD.  With both 2.07 and 2.50, I get the following error message: "Fail to do module option. The utility process has not completed."  Can anyone help?  I saw one thread that indicated this may be because I chose the option to keep my custom start up image when presented with the option, but I was afraid to choose anything else.  FYI, now the Lenovo update utility doesn't even tell me there's a BIOS update's listed in my installation history as a successful update! Thanks for any help you can offer.  


Go to Solution.

Answer:BIOS Update fail on T530 - Fail to do module option

If you are on Windows 8 it is likely because you need to do a full shutdown. The default is hibernate shutdown for the next boot. Then there will be cold reboot after which if may finish the process. Windows 8 shutdowns are totally different process and the machine is never totally off.

T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Win 10 64bitZ70-80 I7 - 5500U 16GB GB - 1TB HD Win 10 64bit FHD 17.3", G840 w/2GB

3 more replies
Relevance 70.11%

Hello guys

I'v just installed Windows 7 32bit on Toshiba Satellite L300D-23D , I didn't install the BIOS update but everything is working just fine .
Do I still need to update the BIOS?
Thanks in advance.

Answer:Windows 7 and BIOS update on Satellite L300D-23D

If everything works well I don't think you need an BIOS update.
I have Satellite A300 with old BIOS and use Win7 too. No problems at all.

Until everything runs well I don't even think about BIOS update.
Don't touch well running system. ;)

1 more replies
Relevance 69.29%

Hi All,

I have a Toshiba Satellite Pro L300D running Windows Vista Business, it's only four months old, recently it started crashing and each time it did I got a message stating the BIOS needed to be upgraded.
So I went to the Toshiba Site and I downloaded an update to the BIOS yesterday and installed same today, during the install the PC frooze,
I left it switched on and it stayed like that for four hours, then it switched itself off.

Now when I switch it on all I get is the fan running nothing else.
The powerlead was connected to the Laptop the whole time.

Have you any ideas as to what I can do, I have loads on the Laptop that I'd hate to loose.

Model is PSLC9E Satellite Pro L300D

Answer:Satellite Pro L300D PSLC9E - BIOS Update Failure

The case is clear buddy? the BIOS update procedure failed?
Maybe the BIOS could not be updated properly because the notebook crashed before the update procedure could be finished.

Well, I can tell you that you will be not able to fix it yourself? this is a serious issue and ONLY the ASP (authorized service partner) would be able to help you!

Therefore contact the ASP technician and ask for the further handling!!!

Good luck

6 more replies
Relevance 68.88%

What's the chances I can bring this laptop back to life after my friend updated his bios and it decided to turn its self off???

He used the correct Bios file from the Toshiba website, does all but the last bit where it updates the bios and then just turns its self off, any-chance it can be brought back to life without getting Toshiba to attempt to fix it??

I've had the battery out and the AC for a few hours, tried to turn it on get a few lights and the fan and the dvd drive can pop out but nothing else,

I'm guessing nothing can be done really ???

Answer:Toshiba Equium A210, Bios Fail

You could try and replace the bios chip if it's replaceable. Probably only fix

5 more replies
Relevance 68.06%

Hi there,

I installed the BIOS update 3 days ago, I did have a couple programmes open at the time and also an external USB mouse in at the time. The hard drive crashed and then blacked out, but the power was still on with the fan working at full pelt. I attempted turning the computer off by the power button, but it wouldn't, so I let it run out of battery. Since then the computer seems to turn on but the screen has been blacked out ever since, so I cannot see what state the hard drive is in.

Any ideas?

Answer:Re: Installed BIOS update to my Satellite Pro L300D and now screen doesn't work


Oh buddy, this sounds like that your ROM module is damged due a faulty BIOS update :(

Normally a BIOS update should *not* be done with running background programs (also antivirus). I think this was the reason why the update wasn?t successfully.

However, you can do nothing. You will need help from a notebook technician that can try to reflash the ROM module. On the Toshiba page you can search for an ASP: > Support & Downloads > Find an authorized service provider


2 more replies
Relevance 66.83%

I keep getting an "unmountable boot volume" error and need to load the fail safe defaults in BIOS. Forgive me if this is an easy question, but how the hell do you do that? I've read countless messages about hitting the f12, f8, f2 buttons on startup. However, nowhere have I found the option to load the fail safe default.What am I missing????

Answer:Load FAIL SAFE defaults in BIOS

Hi there,Normally you can ge into BIOS by pressing these keys after stating your system.Del,F1,F2,F10,EscTry these keys and hope fully you will get into BIOS . Once in BIOS then you will find a option of Load defaults.If you are unsuccessful then post your system make and model so we can find a sloution for you.Best of luckImran Khan

16 more replies
Relevance 66.01%

I have used the Toshiba support download page to identify my model A205-S4629 Satellite laptop and downloaded the following BIOS update utility sa200f0v520.exe.

After building the IOS install disk and running the Phoenix Phlash16 utility I get the following message "File has different BIOS part number".

The utility is using the following image file MW10M520.ROM.

Any input is appreciated,


Answer:Satellite A205-S4629 BIOS Update Fail - File has different BIOS part number


As far as I know the BIOS package downloaded from the Toshiba US driver page contains the WinRAR 32-bit self-extracting ZIP file which includes both Windows-based and diskette based BIOS update installation options.

Did you try to update the BIOS using Win-based BIOS?

What OS do you use?

1 more replies
Relevance 66.01%

Hi - I have a G81915P Duo Pro mobo, XP and Vista on separate drives. I was (happily!) changing the boot order to select the OS. Then I increased (exchanged) my ram from 1GB to 2GB. The bios saw the new ram but XP sys info did not. It was recommended that I update my bios. So I went from F1 thru F3, F5 to F6. After each change I booted in bios fail-safe to XP. I did not notice that my Vista drive (IDE under a sata controller) was not shown in the boot up sequence selection.
So then I changed bios settings back to my original ones, saw my other IDE drives and booted into Vista.
Now I can only boot to XP by resetting my bios to 'failsafe' and to Vista by changing any bios setting. All very irritating!!
I have changed my bios back to F1 but it makes no difference.
Any ideas? TKIA

Answer:bios 'load fail-safe' needed to boot to HDD

Put back the latest BIOS version.

Start applying your own BIOS settings and see exactly which setting makes XP unbootable.

2 more replies
Relevance 66.01%

Hi. I have a dell inspiron laptop. My problem starts when i tried to update my bios from a07 to a15. While the update is running my laptop screen suddenly turned blank but my laptop is still on. What should i do?

Answer:Bios update fail. Blank screen while updating bios

Please check and see if you can get into BIOS. By the way list Dell model number and version of window. Ex: Dell Inspiron 3543, windows 10
1. Power off computer
2. Power on computer, quickly start tapping F2 key continuously. Hopefully, you'll be able to see BIOS screen.

1 more replies
Relevance 66.01%

sach2 said:

I am having trouble figuring out what to rename the BIOS file. I have read so many posts that I can't get clear on it.

I'm going from something like post #3 in this thread
At least we know there should be some form of recovery possible using the <windows key> and <b key>.

Your BIOS update has two files in it and shortening them to four letters is simple but using a tool provided by one of those BIOS forums it gives five possible names for each of the two BIOS files included in the softpaq. The five names are the same for each of the two files which is what has me confused. HP doesn't give the manufacturer's name for your motherboard which makes it more difficult. I'm going to start fresh tomorrow hoping my subconscious works on it.Click to expand...

Sach Hello, I write from Argentina, I have a laptop hp dv6-3052 to which the BIOS does not work. Lei reply and follow all the steps, but when squeezed <windows> + <B> the notebook does not read the flash drive. Some time ago a laptop acer fix in which I had to tighten <Fn> + Esc to read the flash drive, but this notebook does not work. You know that combination should I use?

From already thank you, and sorry for my English, I use google translator haha.

Mensaje original:
Hola sach, te escribo desde argentina, te... Read more

Answer:Re: BIOS FAIL dv6-3052:black screen after Bios update


Does your Laptop work ok at present? if it does then do not update the BIOS as its likely not needed, BIOS updates are only needed to fix specific issues, like update in Windows say Windows 8 if the said laptop was a XP/Vista based one, to hardware.

1 more replies
Relevance 66.01%

I have a HP pavilion dv6-2020EV Note book.
I downloaded an update for Bios "sp50586.exe" from Hp site an extract it. after that a program (Insyde Flash V 3.80.00) Loaded and I pushed start button.
after some time I made mistake an pushed my notebook Power Button. The note book became shutdown and now I see only Black screen.

I performed some actions with HP online guide like pushing Power button for above 1 minute, removing Coin battery, Connecting notebook to another monitor and even removing Hard Disk. I get no reply from machine.

Now the power LED is on, and I can hear sound of DVD Rom when I put a Disc in it. But I can see only Black screen.
also I tried to load Recovery disc of the note book but it could not be loaded.

Would you please Help me. I have no solution. I lost my notebook.

Answer:BIOS FAIL dv6-2020ev:black screen after Bios update

How did HP end the service call-did they offer any further solutions?

Can you direct me to the support page for your model? I can only find it at HP India using Google cache--the actual website seems to be offline. [I want to double check that they were recommending the sp50586 for that model.]

Also, is there a longer model number on the tag on the bottom of the laptop? It might be useful for finding others who have experienced the problem. [There appears to be a BIOS recovery flash option that might work but it is important to have the right version of the BIOS to attempt it.] Since that update is so new there are not many people experiencing the same problems. Your laptop has an Intel processor?

10 more replies
Relevance 65.19%

Hi Guys
I have a number of windows XP home edition updates which have failed to load. If I click shut down at the end of session then my pc freezes. If I shut down without loading theem all seems okay. Is there a way I can delete these update and start again.
Thanking you in anticipation
Ron Thayre

Answer:Windows update that fail to load

Try to restore your computer before the updates were downloaded using system restore. You can then download them again.

If you need more information on how to do a system restore just ask.

Good Luck

1 more replies
Relevance 64.78%


I am helping a friend to determine what the problem could be on her laptop Satelite A215 -S6816 Windows will not load on start up and it says "press F2 for setup, Press F12 for boot device selection menu" however niether one of those options work no matter what I do.

I have tried them on start up but nothing happens. It just wont enter BIOS mode or the menu. It will say please wait or entering menue but again nothing happens.
What else can I try to get into the menue or to get the system to get windows to load? Could this be a motherboard issue? Hardrive issue?

Thanks in advance.

Answer:Satelite A215 -S6816 Wont enter BIOS mode and Windows wont load

hi harddrummer,
connect an external keyboard and try again

if it works there is only the internal keyboard defectiv/bad connected
i dont think that is an os based problem...

4 more replies
Relevance 64.78%

Hey Guys,

Just recently I have being receiving error messages when I start up my laptop every day.
There has never been any problems with my laptop until now, although it doesn't really affect the laptop at all it still pops up?

I get an error message when I move to the desktop that says "BIOS Load Fail" but then i can close it and nothing happens to my computer. I am running Windows 8.1 and I just installed the new Toshiba Service Station Apps. I also checked to see if the BIOS was up to date, and it was.

Any help here? It would be much appreciated, thanks.

Just an update: I just tried to open up my GPU tweaking software, and it can't open because the Error Message shows up. But my CPU monitor still works.

Answer:Satellite P870/026 - BIOS Load Fail Error Message popups

> I get an error message when I move to the desktop that says "BIOS Load Fail" but then i can close it and nothing happens to my computer. I am running Windows 8.1 and I just installed the new Toshiba Service Station Apps

Could it be possible that this alert (message) is coming from the Service Station utility?

The service station software allows your computer to automatically search for TOSHIBA software updates or other alerts from toshiba that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts.

Probably the message ?BIOS load fail? means that service station was not able to download (load) the information about the latest available BIOS.
From my point of few this is not a serious problem. If you want try to uninstall the service station tool from the system just to check if this would cancel the notification

3 more replies
Relevance 63.96%

I dont know if this is the right section or not

Well my brother has this toshiba satellite a105 laptop and it was working fine.
Now I dont know exactly what happened, but my dad (who isnt to computer smart) said that he was reading news and the laptop just shut off and the windows start up logo came up, than the laptop restarted again and it keeps doing so every time the windows start up logo (the blue loading bar) finishes

There is a quick, almost instant blue screen with writing that pops up and I was able to read 'STOP' but nothing further, than the laptop just restarts again

I also cannot enter safe mode either, and when i put in the recovery cd, I get a messege saying WRONG MACHINE, but its the right cd for it

Any ideas what could be happening, and how i can get into windows again

Thanks in advance

Answer:Toshiba Laptop Wont Load Windows Xp

From what I see...that CD is a recovery CD and it will only work for the system it was created for.

If you get that WRONG MACHINE message, you are not using the right recovery CD...from what I read.

I think it would be better if you could borrow or get someone to burn you a copy of a real MS XP CD and use that in conjunction with the Toshiba license, if the situation calls for such.

The first 11 or so digits after STOP on that error message...are clues to whatever is recognized as wrong. If you can take a look, write them down correctly, and post them would help.


12 more replies
Relevance 63.55%

Just tried to install the latest W10 as a boot with W7 on SSD , installation failed and now will not complete installation. Will not reboot and reinstall, and prevents access to the BIOS to change boot to CD?
Any thoughts, suggestions or experience?
Looking at disassembly to remove SSD data cable ( Lian Li Briefcase build complicates everything)

Answer:Latest Build Windows 10 fail, wont allow BIOS access

Typically you can press a key combination to select boot source.. F12 on many systems.

Windows cannot disable access to your BIOS.

21 more replies
Relevance 63.14%

i have an acer laptop which im currently using but a friend gave me his old laptop whichs has better specs (although still not great) that had no hdd its a toshiba equium a60 i took the hdd from the acer and put it into the toshiba but it wont load past the black toshiba screen occasionally it gets to the boot screen (safe mode, last known config etc) but all of these options go bk to toshiba screen sorry for the poor explanations would be very gratefull for any ideas :)may i add that the hdd does work wen i put it bk into my acer cheers ;)

Answer:laptop wont load past toshiba screen

The windows configuration with the drivers for the acer motherboard etc will not be liked when you put it in the toshiba and so windows pukes on it. You can try a "repair of the operating system" which will usually work', but it depends how familiar you are with a computer.

5 more replies
Relevance 63.14%

Ran Windows Update on wife's computer today (Biostar A75-MH mobo, AMD A8-3850, 8Gb DDR3-1600, 64Gb Samsung 830 SSD boot drive, Win7 x64) and upon restart it froze at 35% installing the updates. After it did nothing for 30 min I rebooted. It boots to the desktop but with an error box saying failed to load sortbls.nlp. Explorer isn't working, can run any programs, Start menu won't come up, just sits with the blue circle spinning. Tried to run system restore but the 11-15 one disappeared from the list when I tried to run it and now just shows the only restore point as Windows Update Critical Update from today which fails. Startup Repair says no problems.

Any suggestions?


Answer:fail to load sortbls.nlp error after Windows Update froze

Use System Restore to revert back to a date before any updates may have been applied.

2 more replies
Relevance 63.14%


My PC failed, just like last Sunday. I left open the PC, when I come back, a bl;ack screen with the message that Windows to load, maybe caused by a software update

Instal the Window repair disk and reload....

Since , I was not in front of the PC, I can't know what could cause that.

Edit: I review the events observer. I see an error
"Kernel Power" 41
How could I know the kind of problem that cause WIndows to fail

Anyway to read the chain of events that lead to the problem

Is there a way to find witch software, if there is one, that had tried to execute an update?

Any help trully appreciated


Answer:Windows fail to load after update?? ( same problem occured last Sunday

Usually that indicates a power supply issue. It most likely is not windows, and your power supply is failing.

1 more replies
Relevance 62.73%
Question: Bios Update Fail

Hello all. Today i've tried to update my Lenovo ideapad z560 bios (v2.08) to newest (v2.15). I've flashed bios with no problems, restarted my laptop, used default settings in bios, restarted again and there is the problem. My windows 7 ultimate x64 doesn't boot. All tries ending with bluescreen and automatically restart my laptop. I want to flash the older bios (v2.08) from my pendrive but i can't find bios v2.08 files anywhere. Could anyone send me this files or provide a link to download it? Regards,Nav17

Answer:Bios Update Fail

HelloWelcome to the communityJust wanted to confirm that was it instantly after changing to default values in bios that you started getting bluescreen? And what is your sata mode set to? Is it Ide or Ahci?

Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

1 more replies
Relevance 62.73%
Question: Bios update fail

I downloaded bios file from dell website, clicked on setup file and all it did was create a windows flash system file in same location as setup file. Nothing else happened from there, haven't been able to update bios in dell 531

More replies
Relevance 62.73%
Question: BIOS Update Fail

Everytime I try to update my BIOS on my laptop I get this error:

BIOS update failed! New Bios is not compatible with the current system BIOS.
New BIOS part number doesn't match system BIOS part number. Error Code: -120
See the Help for troubleshooting

an I doing something wrong HELP

I am using Fujitsu Lifebook AH530

Answer:BIOS Update Fail

7 more replies
Relevance 62.73%
Question: bios update fail

my HP-Pavilion-g6-1d00-Notebook never update bios it has Insyde F.31, 10/23/2014 it can't update. i try to install F.33,F.42,F.48 but all fail F.33 install fail and give error "IHisi not support current bios" , and this error "BIOS did not support InsydeFlash !"please help me to update my bios

More replies
Relevance 62.73%

*Symptoms.1.BIOS Update Fail2.No output screen.(black screen)3.usb drive not recognized. *Not resolved.- Removing CMOS Battry - Clear CMOS Jumper  What should I do?

Answer:BIOS Update Fail - tc-605

What happened?What BIOS version?What operating system came pre-installed on your computer? If Windows 7 came pre-installed on your computer or you recently upgraded from Windows 7 to Windows 10.....then you'll need to go in to BIOS settings and do this: 1. Disable Secure Boot2. Make sure CSM is enabled (launch csm always)3. Hit F10 to save and exit BIOS settings---------------------------------------------------------------------------------------------If Windows 8.1 originally came with your computer then you can either try to contact Acer support or take a look at AMIBOOT.ROM threads on this forum.  But if you don't know what happened, then it would be better to contact acer. Also, if Windows 8.1 originally came pre-installed, you can try to reset bios to defaults. 

9 more replies
Relevance 62.73%

here is the deal. installed a new harddrive on a friends computer. installed the OS onthe new HDD and it wouldnt boot. wellllll i went and put back in the old HDD and now it wont boot that one either but what is worse is that the bios wont load either. i reset the bios by taking out the CMOS battery. even switching the jumpers. it reset my bios but it just wont load my bios menu. when i turn the pc on it tells me i need to set time and date in the bios big deal since i just reset it. however, when i hit delete to load the claims its "loading setup" but it never does. i let it sit for hours and it never loads the bios. its like its frozen. anyone have any suggestions on what i can do? i would be happy if i can just get the old configuration working so he can have a computer

Answer:PC wont boot AND wont load any bios..

What jumpers did you mess with. Was it a bios reset jumper?What is the system specs? It sounds like the Bios is toast.Try to go to the web site of the motherboard manfg,and get a bios and make a BIOS image on floppy and reflash the BIOS. There should be instructions on how to do this.

9 more replies
Relevance 62.73%

ok ive tried holding the off button and disconnecting from everything but nothing, it wont load up safe mode or any other mode-although im only a bigginer so probably doing something wrong, i press start windows normally and it just jumps back to the first laptop wont load up please help. i have no disc, it did have windows 7 when i bought it 2 years ago although i couldnt get on with it so a friend deleted it and put xp on-unfortunatly my friend aint about to help atm and now i cant do nothing. can anyone out there help please

Answer:toshiba sattelite wont load upwindows just has black screen

6 more replies
Relevance 62.32%

Help, please. I cant load bios on this model Toshiba Satellite a500-1gl.

More replies
Relevance 62.32%

i downloaded the bios update " 60cn93ww" and after clicking flash, it just fail, error displays "ERROR 220 - Failed at power status check! Status =223" there's a notice before flashing. saying that i should have external power input, close all other applications, but i met every requirements. that is I dont know why i still get error. can any help me with this would appreciate it 

Answer:Z585 BIOS update fail help!

Hi Alun
Welcome in Lenovo Forums
i would like to share with you if the windows is loading fine or not  otherwise the error massage so that we can advise you with the suitable solution
Waiting for your answer

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 62.32%

i downloaded a bios update tool from HP website, but while updating the bios, there was a power black out. my laptop couldn't come out of herbanation and it can't boot. only the power button light, caps lock light and WiFi light are working, the fun is also working but it can't boot.i have tried removing the battery, power adapter and press the power button for a minute, nothing has there any solution for this problem.the pc is HP625 notebook

Answer:bios update fail, pc can't start

Hey,My son's laptop did this blank screen too - only power button light was on, but no fan, no key lights, nothing.  I tried the same hard reset -remove batt, press power.  Almost took it apart to reseat the RAM, but decided to search the forum again (sorry I can't find that hp support page anymore).  Anyways, you will read that beside hard rest and reseating RAM, they will tell you to try connecting it to an external monitor to check if it is a display problem. Short story, none of the above worked for me, EXCEPT THIS - hold down Windows key and "B" key.  While holding down the Windows and B key, press and hold the power button for about one second, then release all 3 buttons.  The power key will light up, wait for about 40 seconds (more or less), then the BIOS will update. Hope it works for you too. UPDATE:  I just found the link again.... I followed step 3...

2 more replies
Relevance 62.32%

Setup a new Slimline tower today 260-a010z , HP support asst had several updates avail, so dl'd them & install, restart & assistant tells me again to update bios which I already did & created a flash drive backup! BIOS Update (ROM Family 822A) Softpaq Number: SP77849 Version: F.14Ap1. Also HP Sure Connect, Realtek Card Reader Driver (Windows 10v1607) & Realtek Wireless LAN Drivers upated but still show needing to update. Is there a fix pending for these errors? Thx

More replies
Relevance 62.32%

Hi, I have performed an BIOS UPGRADE but after the system don't start.I have try all solution from disconnect all cable, Windows+B key on power on...but nothing is work. I heard 8 beep only if i disconnect Hard Disk and after reconnect, when power on with Windows+B key 8 beep sound.  

More replies
Relevance 62.32%

Hello ... I am a proud user of Lenovo G550 laptop No problems so far,until i tried to update BIOS. I followed instructions by the book,but when i press install on self-extract archive,extracting starts and the i get the code: Error 5 Problem seems to be that i don't have administration privilege,although i have administrator account and it's password protected. Program seems to start (BIOS updating software),and then the error pops-up saying phlashnt.sys driver can't be loaded and that i should reboot and log on as administrator. My first thought was that my anti-virus software is causing this,so i turned it off and tried again,but that made no effect.I am using Free Comodo Internet Security Premium. Deepest respect for you people from Support staff and i hope there is a solution for this. Best regards


Go to Solution.

Answer:G550 BIOS Update Fail

Hi Bljublju Try right-clicking and select run as administrator.

5 more replies
Relevance 62.32%

Hello, I have an N100 which was fine until I tried the automatic software and driver update which loaded the latest drivers and BIOS update/s. A box appeared on the screen asking me if I was sure I wanted to update the BIOS, and unfortunately I went ahead and suspect that the BIOS for the N100 with the Intel graphics chip was loaded, whereas I have the Nvidia model. So now I can't get into WIndows XP though the BIOS and DOS applications run fine. Every time I try to load WIndows I get a BSOD. Has anyone found a solution to this yet? Maybe there's a way of reverting to the correct BIOS through lenovo care or DOS ? Please feel free to reply and Many Thanks. ArnieLondon. UK

Answer:N100 BIOS Update Fail?

Try booting to Windows Save Mode by hitting the F8 key immediately as Windows is starting to boot.  From there you can select "Last Known Good Configuration".  If that fails, try "Safe Mode".  If it is just a driver issue, you should be able repair the situation.

2 more replies
Relevance 62.32%

I am trying to update my helix2 BIOS from 1.80 to 1.82. However, when the computer reboots, it shows "secure flash authentication failed" and shut down the machine. The ECP is updated though. Any help?

Go to Solution.

Answer:Helix 2 BIOS update fail

Hello xRender,
I hope you've managed to resolve this but if not a service tip has been released regarding the the authentication error you have reported.  Sorry for being late with a response.
Link to Service Tip;

2 more replies
Relevance 62.32%

Hey guys,i have a problem after trying to update my my T440.During the update on Windows, it restart several times and on the last time it wont power on properly.The screen stays black and it won´t boot.So i think my bios is broken.What i can do ?thanks for help!  

More replies
Relevance 62.32%

everyone, after making good post and loosing it (smartphone can't remember entered text if you change app) I'll try to make it once more.So I flashed bios on my y550p to ver 33. After it main screen is off, indicators on, but no loading.I tried recovery by usbflash but no effect(flash was succesfull - fn+r ac cable on, pw on. 1 min 1 beep, twice beep, 1 beep per 3 sec for 2-3 min. Twice beep. Reboot). Any way to slove problem except service? I will be far from nearest service more than 12 hours road for 10 days.P.s. sorry for my englishUpd: start of laptop re flashing bios and fail. Downloaded from offsite

More replies
Relevance 62.32%

after I run .bat file from archive ( steb by step as in instruction) it says "plise wait" , but nothing happened. I'm wait about 5 minute and restart manualy and enter in BIOS version was 5.40. After it i turn off notebook and it not turning on. What can i do?

Answer:Stellite L40-14B Fail after BIOS Update 5.40-WIN

Unfortunately buddy... bad news... in your case something went wrong during the update procedure. BIOS update is always risky.

In my opinion you should contact the Toshiba ASP which is responsible for you county and should ask for the help...

As far as I know the guys could flash the ROM module again and tehn the notebook should run again.

Good luck

2 more replies
Relevance 61.91%

Hey All,

I've got a Toshiba Satellite Pro 6100 laptop, and I just finished partitioning the HD in order to install at least one Linux distro. I rebooted the computer to get into the bios to get it to bot from cd, and I can't get in using any method I know of (DEL during boot, Shift, all the F-Keys...). Does anyone knoe whats going on here?

BTW, I don't have the manual for it, so otherwise I'm SOL.

Answer:Solved: Toshiba wont let me into BIOS!!!

This may give you some info

Tried another keyboard? Sometimes a keyboard driver isn't the best, and keys get stuck.

2 more replies
Relevance 61.91%

having problem with the computer with programs not loading or updating , or it hang up , havent really done anything to fix it yet


More replies
Relevance 61.5%

Hello! I have A01 bios version on my e6330.I can not succed install the current updete.I tryed windows 7, windows 10, MS-DOS...
The computer open the exe file, progress to 100% and restarts back to windows. It does not start the proper flashing...
Any other ideas? Can someone to help me with a bios dump? 

Answer:Dell E6330 BIOS update fail

Thank you for writing to us!
We would suggest to first load BIOS defaults and then try to update and also check if there is any error message that comes up.
Kindly private message the service tag and email address.

2 more replies
Relevance 61.5%

Hi, New to the board and looking for some help. I have a w500 still in warranty. We have been having issues with running Vista and the machine not rebooting after hibernation. Today I found some time to run updates using the pre-loaded ThinkVantage software on the machine. There were quite a few on there including a Bios update... upon running the updates and the machine restarting at the end, I get a black screen....  and nothing... the power lights are on but not more.  I have called Lenovo tech support and they advised me that because I did the Bios update (as part of the many updates that were suggested I required) I have voided my warranty support for this problem.... apparantly I was made aware of this as part of the disclaimer prior to running the updates!!!   Does anyone have any suggestions on steps forward from this point?  


Go to Solution.

Answer:Bios Update Fail - Under Warranty but No Support

Hello mate, No real suggestions but you need to rewrite the bios. You have to send your laptop back to Lenovo.

__________________________________________________________________________________Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

9 more replies
Relevance 61.5%

Hello All! I am a bit inexperienced and new to the forums and am seeking help. I have been using a latitude E5520 for a few years now and have been very happy. About a year and a half ago, my hinges broke and slowly my laptop has been dying. I recently purchased a refurbished identical laptop with the hopes of just moving my SSD, RAM, Processor over and It would all work the same. Once I put my SSD in the new laptop, it would boot, but turn off after 10 seconds and I could here the fans going at full speed before it died. After doing some research, I figured I would update the drivers and BIOS to get the current laptop config as close to my old laptop as possible to increase the likelihood that the SSD would work properly on this other laptop. After downloading the FW and following the instruction, the laptop shut off and never came back up. The lights and keyboard attempt to turn on, but the screen doesn't attempt to turn on and it is making some small noises as it keeps shutting off and powering on. At this point, I would just like to get the new laptop working and forget about swapping parts, if anybody out there can help me, I would greatly appreciate it.

Answer:Bios update fail | Latitude E5520

Hi wisp.em,
Thank you for writing to Dell Community Forum.
Please confirm if the Hard drive shipped with the system is working fine on it. Is the replacement system same in configuration as your Latitude E5520? Can you boot into BIOS <F2>?
Please click my DELL-username and send me a Private Message with the Dell Service Tag number and your email address, so that we can check on this.

1 more replies
Relevance 61.5%

Hello,I have searched here for a couple days and read a bunch of posts - some of which I have tried.   I am NOT trying to go back down to Win 7 (though I really like Win 7)  I am trying to stick with Win 8.1. I was running BIOS P11-A1 and suddenly started having trouble with the USB 3.0 controller.I read some posts here and on other forums that stated I should see if there is a BIOS update. There are actually four for this machine and so I started with the oldest one P11-B0LTTo be honest the instructions in the README pdf file were not that helpfulbut I found soem great data on the AMI website that helped me update to P11-B0L. I ran the BIOS-DOS.BAT file first but got this error: "4 - Error: ROM File ROMID is not compatible with existing BIOS ROMID"So I went ahead and ran the AFUDOS file without all the parameters in the batch file and everything updated fine. But I am still having troubles with the USB 3.0 controller and the process just seemed to be fairly complex.Both my HP's and three other Dell's had Flash BIOS programs, or simple instructions that worked with no problems. Was I just getting lucky with them and there is some hidden UEFI and/or MS-DOS secret ritual that I am missing here ?Am I perhaps using the incorrect BIOS update file - and if so which one should I use ?  Thanks,-Bil 


Go to Solution.

Answer:BIOS Update Fail - Aspire XC-603G Win 8.1

If your computer came pre-installed with windows 8.1, the correct BIOS would be P11.B2 (to the best of my knowledge). The "L" versions are for Linux.

4 more replies
Relevance 61.5%

hello i was half way threw a bios update on my foxconn a6vmx motherboard and there was a power cut,rendering pc dusbin material,some one told me theres a back up facilty on board?please can any one help thanx jez

Answer:foxconn motherboard bios update fail

Is this an AMI BIOS.
If so, and you can get the new BIOS onto a floppy, there is a possibility you may still be able to flash the new BIOS.

Most Mobos with an AMI BIOS will look for a floppy disk with a bios update on it.

2 more replies
Relevance 61.5%

I checked the proper BIOS for AM-3470G computer. There is a Linux BIOS update for it. It is the same BIOS for the AM-3470G and the AM-3470. I have one of each. In both cases. I am getting the incompatible ROMID. As neither of these boxes can successfull run current versions of Linux without a BIOS fix, I am sorta stuck. Can anyone help?

Answer:BIOS Update fail: ROMID is not compatible: P01-A3 ...

 How can i understand which version i need to download?Laptop versions:1.xx can only be updated using 1.xx versions2.xx can only be updated using 2.xx versions (normally 2.xx version are labeled "not for upgrades") Desktop versions:P01.xx can only be updated using P01.xx versionsP11.xx can only be updated using P11.xx versions (normally P11.xx version are labeled "*not for upgrades")"L" BIOS versions are Linux OS dedicated (example P01.xxL) * what does it mean "not for upgrades"?During the windows 7 to 8 transition, some PC models had different BIOS versions from factory, related to the installed OS.Windows 8 PC got an UEFI BIOSWindows 7 PC got a "Legacy" BIOSSo PC with Windows 7 installed from factory can't use the "not for upgrades" BIOS version, even if they were upgraded to Windows 8 or 10, since the factory BIOS was a different version compared to PC with Windows 8 from factory.

1 more replies
Relevance 61.5%

HI,I have a yoga2 pro, with Bios 76CN27WW running Windown 10. I'm trying to update to the latest version, 76CN43WW. However upon running the installer, after the command for InsydeFlash64, I get an error message that no ROM are available in the folder. There clearly is a ROM, since I simply extracted the Lenovo bios files and that went normally. Tried with administrator mode, redownloading, and I always get this error.  I read on some HP forum that seems to use the same BIOS update tool that this is caused by the new bios not recognizing the very old one I have installed, and not letting me upgrade. However, I can't find any links of 'intermedidate' versions on the lenovo site that I could use as a step to bring this to the latest.  Any ideas? Thanks

More replies
Relevance 61.5%

I have a Thinkpad T450s and I am trying to update from BIOS version 1.19 to 1.20. I have created a live-usb with the 'el tortio'-extracted image using the linux command 'dd'. Once I boot into the usb under Legacy-BIOS and select upgrade, it proceeds witht the error message "The process does not recognize this system. The process has been canceled." I disabled anti-theft, AMT (I believe that's the option) and am sure that I'm using the correct .iso file from the downloads section. I do not have any Windows operating systems installed, but I am able to boot into several linux distributions using Legacy and UEFI methods. Here is my BIOS information.  "Handle 0x0031, DMI type 0, 24 bytesBIOS InformationVendor: LENOVOVersion: JBET54WW (1.19 )Release Date: 11/06/2015Address: 0xE0000Runtime Size: 128 kBROM Size: 16384 kBCharacteristics:PCI is supportedPNP is supportedBIOS is upgradeableBIOS shadowing is allowedBoot from CD is supportedSelectable boot is supportedACPI is supportedUSB legacy is supportedBIOS boot specification is supportedTargeted content distribution is supportedUEFI is supportedBIOS Revision: 1.19Firmware Revision: 1.2" What might you suggest to get the update disk to recognize my system? 


Go to Solution.

Answer:BIOS Update fail: The process does not recognize t...

I have also tried using the update utility under WINE in Linux and it gives me the same error message.

3 more replies
Relevance 61.5%

I've made big mistake. I tryed to install BIOS update for my SAT A-200. Everything went fine but after shuting down computer doesn't boot any more.
If I start it manualy power light comes on hard drive fleshes few time and thats all.

I've got this update with toshiba TEMPRO with Toshiba. I need some advise

Answer:Satellite A200 - BIOS update fail

That?s really bad but in this case you can?t do anything.

You should go to a local ASP. Maybe they can recovery the BIOS and in worst case the mainbaord must be exchanged.
On the Toshiba website you can search for an authorized service provider.

2 more replies
Relevance 61.5%

Greeting i updated the BIOS to lastest version, and the keyboard start to beep, the operative systems dont work fine, some keyboards have malfunction with the shift key, my keyboard is in spanish, with the english version of the keyborad the problem is solved. The motherboard in the notebook is ok, no conectors damage. PD: excuse my english i'm spansih native speakers

Answer:keyboard fail in g470 after BIOS update

Rickynet wrote:
Greeting i updated the BIOS to lastest version, and the keyboard start to beep, the operative systems dont work fine, some keyboards have malfunction with the shift key, my keyboard is in spanish, with the english version of the keyborad the problem is solved. The motherboard in the notebook is ok, no conectors damage.
PD: excuse my english i'm spansih native speakers

From what I understand  your notebook works fine when using English keyboard layout, but does not work as expected if you change to Spanish keyboard layout.
Check your BIOS for a language or region setting and adjust as needed.  Also - look in control panel for keyboard settings and install additional keboard layout for Spanish.
Good luck.

3 more replies
Relevance 61.5%

Just tried the new Version 30 update.  It seemed to be working fina and rebooted the machine but then came to a stop with the following blue message: LCFC Debug Page InfoPlatform Type: DiscretePost Code: 07h 30h FBh A6h A7h E4h 2Fh 25hWake Source: 00h (WAKE_BY_UNKNOWN) Fortunately, I was able to power off and restart with a "firmware image fail" message but then a normal restart.  Everything appears to be working fine... but that was scary. Any ideas what is going on with this update ?  And anyone else with a similar FAIL ? 


Go to Solution.

Answer:BIOS Update Fail...Y700-15ISK

Well, I tried a second time and it worked.  All is good now.  I guess the update itself may just be a little buggy... let's hope the new BIOS is not.

3 more replies
Relevance 61.09%

Hello everyone

A couple days ago windows forced my computer to update the update didn't install correctly
Or is broken
When i start my computer i get a black screen with cursor
I know it is not a virus or a piece of malware or anything hardware related

Nothing works but i can access the repair thing
System repair dont work because of errors (ask and i will post them) (install disk cant repair either)
I dont want to lose my microsoft office 2010 for i dont have anymoney to buy a new copy
And its also been discontinued

Anyone know how to fix or replace the install only. so no programs or documents films or games are lost?

Answer:Windows 7 Wont boot and repair cant complete (Update fail)

Can you boot to Safe Mode?
What errors do you get from System Restore?
Have you tried Startup Repair? - what error messages did you get?

1 more replies
Relevance 61.09%

Hi Guys,
Hoping someone here can help me with some ideas for fixing my problem.

I have a Toshiba A70 notebook and the thing wont boot up and it has had various other issues like the power jack was broken. I ordered another motherboard and replaced the motherboard. I also have tested the locked screen and connections on another identical computer. I also tested the keypad and touchpad on another notebook and they all work fine.

I have also tested the hdd and optical drive and they work no problems on the other notebook.

In desperation I swapped out the processor for another one I had and same problems. The processor in there was a 3.0ghz processor and the one I swapped it for is a 1.8ghz.

So I turn the unit on and the light around the power button goes on and the fans and drive sound as though they are spinning up and three seconds later it goes quiet as normal. On a working computer this is when the Toshiba splash screen will come up but nothing is displayed. I tried using a torch to see if it was the backlight and I have confirmed that the lcd unit as a whole works. I also tried the vga adapter and an external monitor and same.

So if anyone is familiar with this issue or has any suggestions then they would be greatly appreciated.

Some Information.

Ram is on board
No ram in slot.
Lcd screen works on another computer
Hdd works on another computer
Motherboard battery is soldered to board, not tested.
keypad and touchpad work on other screen.
Power Jack is charging t... Read more

Answer:Toshiba Notebook Wont Boot To Bios

Did it work before you put in the new processor?

Does it work if you put back the old processor?

The problems you are facing are probaly a result of whatever you changed. You could need to flash the bios to handle the new processor.

But it does sound like a LCD Backlight problem but you confirmed it's not.

Try checking the processor compatability.

3 more replies
Relevance 61.09%


I've changed same settings (UEFI to CSM and boot priority: USB FIRST) in Bios and Saved them, now laptop won't boot up, I can't enter BIOS anymore.. Just seeing a black screen.. I tried to remove batter and power, clicked on the power button 1m but nothing changed..

I can I fix this please

Laptop model: Toshiba L-70-B

Answer:Toshiba Satellite L70-B wont boot to BIOS or OS

Any help please?

3 more replies
Relevance 60.68%
Question: toshiba sat l300d

got a prob guys went back to factory settings now my dvd player not workingboots as if its going to then nothing any ideas who to get it going again went to toshiba site but cant seem to find the drivers for it :confused

More replies
Relevance 60.68%

There I was thinking, I should keep my computer up to date. So I tried to update BIOS. The BIOS update got stuck for 3 hours at some stage 3. The computer will not reboot now, not even to a setup screen. DEAD

I have read somewhere that you can make a bootable USB flash BIOS recovery. Then use a certain key combination ie Fn and B or Fn and W (can not remember). Can some one give me a step to step guide from where to download software, right to recovering my BIOS and machine?

I should not have to pay any fees to get my PC working again as it was working perfectly before this upgrade attempt. I did nothing wrong.


I have model pspb6a ocso4m (au model)

Answer:Satellite P200 - BIOS update fail at stage 3

Hi spiralvista,

> I have read somewhere that you can make a bootable USB flash BIOS recovery
Yes, I did read about such threads here in forum but it doesn?t always work and there is no official support for this procedure. Everything what you do with such BIOS recovery tools happen on your own risk and in worst case you could destroy the whole ROM module.

Best option would be contacting an authorized service provider because the guys can have professional tools to reflash the ROM module where the BIOS is stored. So you should get in contact with the guys and ask for help. They can also tell you how much it will cost.

Sorry that I can?t give you another answer but here it?s an user to user forum only where you can talk with normal people like you and me ? Nobody from Toshiba here ;)

1 more replies
Relevance 60.68%

Hi everyone,I have a severe problem (I guess) after the latest BIOS Update. Windows 7 freezes during startup.I own a 64-bit Lenovo FLex 2 15D with AMD A6-6310 and R4, 4GB RAM and a SSHD (8GBSSH). I purchased it without OS and installed Windows 7 - which worked fine so far.I yesterday updated the BIOS with version 9FCN23WW (for Win7 and Win8), the latest BIOS update. A mistake, it seems.After Reboot, I first had to disable Secure Boot in the BIOS, because it would not let me boot at all. I figured out how to get into the BIOS-Setup to disable this (press Enter 2x, press Tab when in the Boot Menu to access the "Apps Menu", then "SETUP" - just in case this helps someone).Now Win7 begins to start up, but freezes during the startup process (the splash screen with the win flag freezes and looks a bit strange. I used the "protected mode" Windows Startup and saw that the process always hangs when loading "amdkmpfd.sys".That is basically it.I guess I have to find a way to re-install the previous version of the BIOS, but I have no idea how!Any idea?!.......Now about what I did to fix this (poor, but I tried):If I try to start from a Win7 installation CD-ROM (actually it is one for Dell PCs, but I guess that is not the problem) and press a key to boot from CD, Windows loads files, shows "Starting Windows"  and at a certain point again just freezes. When I -do not- press a key, WIndows Boot Manager shows up and mentions that "Windows failed to start (etc.)" "File: \EFI\Microsoft\Boo... Read more

Answer:Boot Fail after latest BIOS Update on Flex 2-15D

I found our the solution to my problem with the help of SebastianLenovo ... In the BIOS / Boot Mode, I switched back from "UEFI" to "Legacy". That's it. That simple. The BIOS Upgrade routine just did not transfer that setting from the old BIOS to the new. Given the fact that 1. I did not change that setting, so it is default and 2. it would have been easy to avoid, if the BIOS update routine would be well programmed to transfer the current BIOS settings to the new, upgraded BIOS ... Anyway a strange situation that a 64-bit system has a 32-bit BIOS. Actually no Linux distribution (except FatDog and rescue systems) are able to deal with it - Linux only running as a Virtual Machine under Windows. I think this is inappropriate and really taking away a part of the fun if you can not run this laptop as a dual boot system. Thanks to Sebastian and I hope this solution helps someone in the future... Regards, Tristam.

2 more replies
Relevance 60.68%

One of my programming courses uses software which requires hardware acceleration.  In order for me to enable hardware acceleration on my Laptop (Thinkpad T510), I had to update the Intel AMT file which prompted me to update the bios to the latest version.  After the installation, my laptop restarted.  I believe, this is a failed bios update, because my laptop cannot get past the "Initializing Intel(R) Boot Agent Ge v1.3.51 PXE 2.1 Build 089 (WfM 2.0)" I am unable to select what device to boot from and inserting a bootable bios cd does not work. Disabling Intel AMT on the Bios Configuration does not change anything, Disabling the external network rom on the bios, does get rid of the message, but I am still unable to get any further.  I've reset the CMOS battery and the settings/clock were reset to default. However, I am still unable to get past get past the "Initializing Intel(R) Boot Agent..." I?ve attempted to create a Phoenix Crisis Rescue USB.  I?ve followed these instructions I found here ( & to retrieve the FL1 file from the T510 bios utility .exe file.  I've used the crisis package to convert the FL1 file into the bios.wph file. After formatting the 2GB usb as FAT, I used the WinCrisis software in XP compatibility mode to flash the usb. The software said the recovery disk was successfully created, but only 64kb was ... Read more

More replies
Relevance 60.68%

I am trying to update the BIOS on my Yoga 2 Pro 13" laptop.  Downloaded the BIOS update from the support page, but when I run the update, I get the following error:      Get EC part information fail. Will try to attach a screenshot of the BIOS update error message. Has anyone seen this before?  I found one other mention here in the forum but no soution or workaround.  Any help or suggestion would be appreciated.  Thanks. ? 

More replies
Relevance 60.68%

Hello I have an Acer AIO PC i decided to update the bios so i tried to upadate it but it was stuck on erasing bios for like 4 hours so i decided to close it i did and it did not reset i did not know what to do i kinda knew the bios was corrupted i was sreaching on the interent to see if you can check if your bios is corrupted could not find anything so i just left the computer on for a few days and it was working fine did not turn it off, but i had a windows update and thats when it reseted and now its just a black screen the hard and every else comes on and works fine but nothing shows up.

More replies
Relevance 60.68%

Hp support program told to update important bios update. After  update I cant use computer.  PC starts but nothing comes to screen. It stays on about 30 sec and restarts itself. Same thing, nothing shows on screen but it dont boot itself after the first reboot. This happens everytime when I take power off. It dont seem to try to load windows either because hdd light dont blink. I cant even find compatible bios update on HP page that i could try from usb. I tried to clear cmos with jumpers. No change Did HP send wrong bios update on HP support program? Any suggestions?

Answer:hp envy 700-305no bios / hp program update fail

I have the same problem with my hp envy 700-311na computer. I downloaded the bios update but now my computer just has a black screen and the windows+B keyboard command does not work.Computer turns on fine but nothing happens no loading screen or anything. Is there a way to bypass the bios and access the operating system?

4 more replies
Relevance 60.68%

Hello I have an Acer AIO PC i decided to update the bios so i tried to upadate it but it was stuck on erasing bios for like 4 hours so i decided to close it i did and it did not reset i did not know what to do i kinda knew the bios was corrupted i was sreaching on the interent to see if you can check if your bios is corrupted could not find anything so i just left the computer on for a few days and it was working fine did not turn it off, but i had a windows update and thats when it reseted and now its just a black screen the hard and every else comes on and works fine but nothing shows up.

More replies
Relevance 60.68%

hello guysmy laptop had this problem: System may fail to resume from Hibernation state..i found a solution on lenovo website : it says that i need to update the bios.. so i downloaded the BIOS Update Utility for Windows (system runs WIN 7 64Bit) start the setup and it stuck and stop working, the computer freezes. so i waited a while and still nothing and shut it down. now all i got is blank screen, the red LED and CPU fan working but nothing happens. i look for a recovery soultion and found the Phoenix Wincrisis, but it wont work, i browsed the HDD for the BIOS files, and i got the backup file, try to rename it to BIOS.WPH as this guide says: it's not working, tried to do that from a floppy usb but some of the bios files are(tried a couple that i found couse on lenovo website there only the utility or the iso but cannot fine the bios file itself so i can be sure that its the right file i'm using) bigger then the floppy.. so it used also 16GB disk on key.. nothing! please help me, dose any one have a soultion? any help?i also search for the BIOS CHIP on the board but i cant find it, mabye i can buy a pre-flashed bios chip and solder it to the boardi have the log file from the HDD if it helpsThank you so much!

Answer:ThinkPad Edge 15 (0319-3VG) fail on bios update, please help!

Welcome to Lenovo Community Forums!
I?m sorry to hear that BIOS update failed in your Lenovo ThinkPad Edge 15 and is not turning on properly now.
A failed BIOS update could have bricked the motherboard probably. I strongly recommend you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I?m sure they will be a great help.
Best Regards,

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

7 more replies
Relevance 60.68%

L300-03C BIOS Update to V2.2 then Fail to boot on XP
Please help
My OS is WinXP SP3 , BIOS was v1.4
using the latest BIOS V2.2 windows file to upgrade(from v1.4)
The progress is normally finished , however it fail to boot up.

I still can enter BIOS Setup , but can not run Windows XP to login screen.

So , what I can do?

Thank you

Answer:Satellite L300-03C - BIOS Update to V2.2 then Fail to boot on XP

What happen exactly when you start your notebook?
Is HDD recognized properly in BIOS settings?

Can you start OS in safe mode (F8 at start up)?

2 more replies
Relevance 60.68%

Any advice?
I have a 9010 SFF that was working fine, except that it would not install the Windows 10 Anniversary Update.  Repeatedly, about 30% through the update it failed with a BSOD. I tried several times.
Somewhere I read that the BIOS might need updating so I headed over to DELL support.  I let the website automatically detect my system and it found a recommended BIOS update, version A24.
I initiated the BIOS update from the website and it seemed to run successfully but when the PC rebooted it hung half way through POST.
On a second attempt to start the machine - nothing - no display, no light, just will not start.
I tried clearing the NVRAM as indicated on the DELL website here:
I tried both the RTCRST jumper method and the battery removal method.
The result - it now continuously reboots but still no POST, no display, nothing.
I should add that during the original BIOS update, the PC had a Quadro 600 graphics card and a LSI 9200-8e SAS adapter card inside. They had both been working faultlessly and were removed when I tried to reset the BIOS NVRAM.
Any suggests on what next to recover my "bricked" desktop?

More replies
Relevance 60.68%

I was fixing a friend Acer updating everything was going fine until I udated the bios (R01-C0) The BIOS was write protected, rebooted and now its stuck on Verifying DMI Pool Data. :cry I feel so bad. Thank you for looking BIOS V 6.00 PG SMBIOS 2.3 BIOSID R01-C0

Answer:Acer Aspire T180 BIOS Update fail

The OS is Windows XP

3 more replies
Relevance 60.68%

I use my X200 tablet as my primary work computer (I run my own business but I am NOT an IT guy).  I've had my X200 for a year now and love it.  The last few days I ran into an annoying problem where the tablet would take several minutes to boot up while the Win7 screen would tell me not to shut off my PC because updates were being configured, with 0% progress until the computer finally just gave up and started regularly.  This was really annoying because it happened twice when I was trying to load up a presentation in front of an audience, and I had to dance around and waste everyone's time while the computer waited for Windows to do its thing.  I think it took so long because I didn't have have an internet connection and it couldn't configure the updates.  In hindsight, I think I should've simply turned off Automatic Updates. So yesterday I decided to log in as Admin and use the Thinkvantage utility to see if I was missing some important software.  Only one critical item turned up - a recommended BIOS update that would fix a no-boot problem if I ever let the battery drain completely (never had that problem).  So I clicked the link, was directed to Lenovo's website, and downloaded the appropriate 32-bit BIOS update installer for my system, and began the BIOS update process, knowing full well that one should never turn off a computer while the BIOS is being re-written.  It was partially through the update when I made the mistake of ... Read more

Answer:BIOS update fail = dead X200 tablet

sorry to hear about your troubles.   a quick trip to the depot will get your tablet back up and running.
remove your HDD before sending in your system.   the HDD isn't needed for a BIOS repair and very well may be wiped clean and re-imaged if sent with it.
below are instructions to remove the drive.
(edit: typo)

6 more replies
Relevance 60.68%

Hi, I updated the BIOS on my x220 to version 1.17 and now the laptop wont boot. Just continuously reboots even few seconds, it doesn't even get to the Thinkpad logo. I downloaded the BIOS update utility directly from the lenovo website, did a restart logged in as administrator and ran the update. When it was finished I restarted the laptop and then it wouldn't boot. Lenovo support say that this is not covered under warranty. Is this correct? ThanksFitzer

Answer:X220 Bios Update Fail - Under Warranty but No Support

Fitzer wrote:I updated the BIOS on my x220 to version 1.17 and now the laptop wont boot. Just continuously reboots even few seconds, it doesn't even get to the Thinkpad logo.I downloaded the BIOS update utility directly from the lenovo website, did a restart logged in as administrator and ran the update. When it was finished I restarted the laptop and then it wouldn't boot.Lenovo support say that this is not covered under warranty. Is this correct?It should be covered. Call Lenovo Support.

Hope that helps,JohnThinkPad T420s [ i7-2640M | 16GB | 1TB SSD | 1600x900 | 802.11n | BT | Cam | FR | Win8.1Pro64 ]

5 more replies
Relevance 60.68%
Question: Bios wont load

Hey there my old computer is a Hp Kayak XA i switched it on the other day to try and get some music off it and wen i did nothing happened it switched on but no connection went to the moniter to say the comp on so i opened it up n 1 of the fans doesnt seem to be working this happened on my old computer before this i was wondering if anyone would be able to help by telling me how to get the bios back up i am a college student so i should be able to understand any computer language you use ;) please send the response as a personal message to me please i am desperate to get it working !!!

If you get this fixed you are a god lolz

Please reply from peter

Answer:Bios wont load

Hello and Welcome to TSF

Is there a light on the monitor and what color is it?
Is there any power at all to the computer? Is there a light in the motherboard? (some boards have a small led light)

If there is no power whatsoever to the computer change the power supply with a known compatible one.

What fan is not spinning?

1 more replies
Relevance 60.68%
Question: Bios wont load

Ok.. my old pc just stopped working. I did a system restore and when it restarted the pc, the thing just froze there. The power is on, the fans are working, but it wont load anything. Theres uaually a beep after loading the bios, but there isnt so its not my graphic card. The screen is just blank after i turn the power on. So i decided to get a new motherboard and a new cpu, i put them together, same thing happens. It wont load anything can anyone give me some advice on this ?

Answer:Bios wont load

Sounds like the power supply crapped out on you. I doubt that your old mobo and new mobo both died on you.

1 more replies
Relevance 60.27%

acer aspire 5252 bone stock except hdd upgrade
win 7
i dont really know anything else about the hardware in case it matters

two issues

1. some of my buttons on the keyboard do not work. what would be the best way to test if it is the keyboard(ebay replacements are 10bucks) or something else.

2.main big issue. i recently got this from my little bro who corrupted the hdd. Replaced that hdd, and threw windows 7 on it. Powered on fine. Got to windows tried to add more generic software(chrome, etc). Totally Forgot to add drivers so i couldn't really do much until i fixed that. I added all those and figured might as well update the bios while I'm at it.

Bios flash fail. I used acer software and bios from their site(the newest version). No interuptions during the update or anything like that. Everything SEEMED to have gone fine.

System restarts and now will not get pass post boot(i think thats the right term). Supposedly no big right? I looked up a manual to flash the bios either with dos or in crisis mode. Can't boot enough to make it to dos and last hope is crisis mode.

I can't seem to figure out how to trigger it. According to the manual the correct sequence is
1 no battery add usb(with the bios in root directory)
2 press and hold fn+esc than add ac power cord
3 press power button once
(now according to other forums power button led should flash once orange)
4 press power button again and you will be in crisis mode

You should see usb led working and doing... Read more

Answer:acer aspire 5252 bios update fail and other stuff

You say keyboard buttons don't work... is it possible that one of those buttons is also either the Fn or Esc key, not allowing you to enter the crisis recovery mode?

3 more replies
Relevance 59.86%

After closing the lid on my studio 1535 (WINDOWS VISTA), I tried to restart it, but to no avail. I get this message after trying to boot windows:

Stop:c000021a (fatal system error)The session manager failed to create prefixes system process terminated unexpectedly with a status of 0xc000003a (0x00000000) (0x00000000), The system has been shut down.

After researching a bit, I realized what may have happened. I remember awhile before it stopped working the "update windows" window on my lower right that said it would restart in a couple mins. Then I clicked postpone 4hrs, and that 4 hrs may have occured during the duration i closed the lid. I read from another forum that when you interrupt windows while updating (hibernation, sleep, close the lid), you'll receive this error ( at least someone else on here experienced this problem AND havent yet been resolved.)

I tried system restore(couldnt get to the page with the image restore, etc because it goes to a blank screen), last known good settings, safe mode, diagnostic, AND I EVEN TRIED TO FORMAT IT WITH THE OPERATING SYSTEM REINSTALLATION DVD (using run dvd on f12), but all that happened was that it took me back to dell booting screen where after waiting awhile goes into a blank screen with a cursor. (OR IS THIS NOT THE CORRECT WAY TO FORMAT?) THIS IS THE SAME PROBLEM is experiencing, and I dont believe his harddrive is broken.

Then after running hardw... Read more

Answer:My Comp wont boot Windows Vista. Stop: c000021a, Update fail

Please see this MS KB -->

Regards. . .



2 more replies
Relevance 59.86%

Laptop wont load bios or OS

Interesting issue here.
When I press the power button, the HD activity led light comes on for just a second, I feel the HD spinning up and running, the fan kicks in and runs, then nothing. No leds flahing, just power led, no beeps, no screen and no bios.
I'v discharged static build up (battery out, power button held down 30") and tried both mains & battery to no effect. There were no precursors to this issue.
So I can deduce the laptop is unable to complete POST in pre bios, despite the lack of beeps yet can supply power to fan & HD.
Now the GPU is GForce 8400m GS, aware of the issues with the 8xxx series, I'v kept the air flow clean and use a laptop cooler. Possible suspect though it never ran hot and all worked fine till I turned on a couple of days ago. Now I understood that a failure of the 8xxx series usually presented a degraded screen, lines etc rather than failing post.
I'm backed up and use my second laptop so nothing urgent, just a oportunity to learn.
I am interested in hearing from hardware geeks and their thoughts.

Answer:Laptop wont load bios or OS

Seem to have been redirected here for some unknown reason !!

14 more replies
Relevance 59.86%

anyways, i just installed the new tmd Aero magnetic fan thingy.

im running a athlon 2100xp
on a asus a7s333

anyways, when ibooot my computer, itwont pass the screen where it shows the asus boot screen. if i hit del to go intobios, itwill freeze =/

someone plz helpmeout =(

Answer:Computer Wont Load Up! Not Even Bios =(

no beeps at all, recheked ide cable, only 1 stick of 512 memory, ive taken the heatsink off once and put it bcak on, everythings the same but i changed the heatsink/fan =/!
i hit delete at the asus logo and it says entering bios.. and thats it.
wont go no furthur

9 more replies
Relevance 59.86%

I'm a very knowledgeable person of building computer and doing everything myself all though I'm having some problems.. I stayed up till 12:30 one night and turned off my computer and went to bed.. when i woke up i tried to turn on computer and the computer started up but the BIOS and Windows did not load... I took out hardware and put it back together, and when i started it it worked but only five minutes then it crashes... it works after an hour of leaving the computer alone... It finally told me to repair windows all though i cant get my CD/DVD ROM/Burner working when i connect it with just a power cable it works but when i plug in the DVD ROM Data cable it does seem to accept the power.. any ideas? SpecsAMD Athlon 64 X2  2.6GHz  2x512kb I have 3 hardrives and they all do the same thing, i have a 250gig 7200 rpm hardrive, a 150 gig 10000 rpms, and a 80gig 7200 rpm2x EVGA Nvidia Geforce 8800GTS Graphics card 2x G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 Sony CD/DVD ROM/BurnerI it matter i have 3 monitors hooked up to computer

Answer:BIOS and Windows wont load once in a while!!!

try reseating your RAM.Borrow a power supply of equal or greater wattage and swap it into your computer to rule that out as the culprit.

14 more replies
Relevance 59.86%

Hi i was hoping someone could help me with installation of M.2  I Bought the Omen from John lewis ax203na is the mdel number. I tried to install a toshiba THNSN5256GPU7 256GB in the empty M.2 Slot. So in the BIOS i changed the secure boot off and Legacy mode enabled.When i try and install windows on the drive for some reason the drive gets picked up as 4 partition with 0mb Available.After a bit of too and fro i downloaded Ubuntu and managed to Format the SSD to NTFS. Following this i installed Windows 10 but then when it gets to loading the windows for the first time i get Blue Screen showing there was a problem reading from the boot drive. i Switch the laptop off remove and re insert the m.2 without the 1tb Hard drive still no good.I thought ill try to install windows 1 more time and the boom the 0mb available with 4 partion show up again i dont get it. Is this the SSD compatibility issue if so what is the compatible NVMe SSd for the above mentioned modelHelp would be appreciated thanks

More replies
Relevance 59.86%

Help guys, first of all I am new here, so howdy?

Laptop Toshiba Satellite 550 series
O/S Win 7 Ultimate 32 bit
Intel core Due 2000
ram 4GB

I reinstalled my Windows fresh and was operating perfectly, after attempting to dual boot the machine with Ubuntu 12:04 which failed miserablly the Windows also has become so that it takes exactly 6 minutes 16 seconds to boot up. the ubuntu that i tried to install Fails completely.

So as it is a new fresh Windows also I thought no bother, I just reinstall Windows again, so went into the bios and told it to boot up from CD and I though Bobs yer uncle in a few minuts. NO. the machine booted up again via HDD at the same pace of 6.16 minutes.....
Thought ok, just stick the win 7 cd in and click the Setup.exe file.... that should sort it, except under my Computer Shows up no CD/DVD Rom device.

I looked into the device Manager next and in reality there are no cd/DVD Rom device listed and no Option to introduce one, under add new Hardware everything under the sun Comes up listed but CD Rom devices.

So I thought you know what go into command promt and Format c: manually and then put the cd in, that should work because the bios has detected the cd Rom.... except the machine refuses to Format c; drive at allll cost.

ran MSconfig next to try and sort it there but I was just as unsuccessful there as the rest.

now what I am doing is ""pulling My Hair out"" please someone tell whats going on with this ma... Read more

Answer:Toshiba satellite bios detects cd/dvd rom but windows 7 ultimate wont,

The CD ROM problem may be a driver problem. Look at the Toshiba site whether they have a driver.

Your slow boot is probably caused by the remaining Grub. But that can be fixed. Post a picture of your Disk Management and we'll see what can be done.

Formatting the disk from within the OS does not work because the system protects itself.

Next time tou want to install Ubuntu, put it into a virtual partition. That is a lot easier. Here is a tutorial on how to do that. It is for Zorin which is an Ubuntu derivative and it works the same for Ubuntu. Only the VMware Tools installation needs different commands. Try those:

cd Desktop/vmware-tools-distrib

sudo ./ -d

9 more replies
Relevance 59.45%

I have a laptop Toshiba Satellite C660-1ME (Part Number : PSC1SE-00G009AR).

I wanted to update the BIOS with the latest version 1.40. When you run the BIOS update gives this error "*project ID check fail*" what to do? how can I solve this problem?

And read all Thread about this problem but not change.

Answer:Satellite C660-1ME PSC1SE - project ID check fail while BIOS update 1.40


I recommend checking this thread about the same error message:
It seems that the new file has been uploaded and seems the issue has been solved in this case?

3 more replies
Relevance 59.45%

Hi @all

how can i make a bios update on the Keyboard extension?

Bios from Tablet is 1.70
Bios from Keyboard is 1.50

When i start the update, the update say "Your Bios is up to date!"

Sorry for bad english, it is not my native Language


Answer:Satellite Click Mini - BIOS Update Keyboard extension fail

If your BIOS is already up to date, you don’t need the BIOS update.

and you can use only the BIOS which is available on the Toshiba download page

5 more replies
Relevance 59.45%

I have a laptop Toshiba Satellite C660-1ME (Part Number : PSC1SE-00G009AR). I wanted to update the BIOS with the latest version 1.40. When you run the BIOS update gives this error *"project ID check fail"* what to do? how can I solve this problem?

Answer:Satellite C660-1ME PSC1SE - project ID check fail while BIOS update 1.40


Usually the VAP (value added package) needs to be installed in order to update the BIOS.
Is VAP installed? If yes, try to update or reinstall this package again and check if BIOS update is possible.
Furthermore disable any security software like firewall or antivirus software which could prevent the BIOS update.

3 more replies
Relevance 59.45%


I have a problem with updating the BIOS on Toshiba Satellite c600-28j.
Error: Project ID check fail

Model: C660-28J
Part NO: PSC1NE-01200XRU
Serial: XB063018K
BIOS Version: 1.10
OS: Windows 7 Pro SP1 32-bit

What can you recommend?


Answer:BIOS update issue on Satellite C660-28J - Project ID check fail

Check this thread:

The BIOS from Toshiba Australian page should work

1 more replies
Relevance 59.45%

Please Help me...

I have a Toshiba L300D Laptop it has a build in webcam and I have just installed windows 7 on to it and i have all the drivers for it but i can not find the windows 7 webcam driver for it.
I tried the windows vista drivers on it but it does not work.
Please Help...

Thanks in advance.

Please Help sort this out as i need my webcam...

Answer:Toshiba L300D Win 7 Webcam Driver...

Quote: Originally Posted by 7tech

i have all the drivers for it but i can not find the windows 7 webcam driver for it.


Did you have a look at the support page for your model, I'm guessing not otherwise you would have found this - Download Windows 7 drivers:

6 more replies
Relevance 59.45%

i have no recovery disk or windows installation disk and the message its showing is file,windows system 32 kdcom.d11,status 0xc00000e9, info, windows failed to load because the kernel debugger dll is missing or corrupt. please help me

Answer:toshiba satalite l300d will not start

... do you see any sort of menu when you tap the <F8> <key> ?... do you see any sort of menu when you tap the <0> <key> (zero key)... tap the <key> @ reboot/startup. How to use the Toshiba HDD Recovery Utility.Demonstrative exspelling... there is logic to this madness! element of surprise Grrrrrrrr

4 more replies
Relevance 59.45%

Toshiba L300D - 11v...have delightful pastel-coloured gingham patterns across whole screen, which vary/fluctuate during use...'rather fear the display needs to be replaced, but need to know if there are other possible causes I've not thought of...the laptop functions quite normally with a CTX flat screen attached. it may not be relevant, but the inboard charging socket is very loose. do prod me for further details.



Tech Support Guy System Info Utility version
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 32 bit
Processor: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 1916 Mb
Graphics Card: ATI Radeon X1200 Series, 128 Mb
Hard Drives: C: Total - 76236 MB, Free - 22073 MB; E: Total - 74888 MB, Free - 69799 MB;
Motherboard: TOSHIBA
Antivirus: AVG Anti-Virus Free, Updated and Enabled

Answer:Toshiba L300D Display corrupted

6 more replies
Relevance 59.45%

after still not having the Screen freeze and a Sound-loop problem fixed, I'm getting a error message on my windows startup.
THIS is the error message. Sometimes the error message appears once, or twice. I'm starting to see this message since yesterday. Is there anything to fix this? And what's its cause?
HERE are my specs if anyone needs them. Ask if you need some more info :3


Log : ARBER-08_07_2015_220841,

Answer:"BIOS Load fail!" error message on startup. How to fix?


I am extremely sorry that this thread was not attended to. There are not many people in this field.

In case you still require help, kindly respond to this thread and I will be notified via email and you should expect a response from me in 48 hours.


1 more replies