Computer Support Forum

Display error 24 - unable to solve...

Question: Display error 24 - unable to solve...

Guys,

I'm a newbie here- excuse me if I don't know all the protocols around here, I'll try to pick them up quickly.

Anyway- here are the details on my PC:

Compaq Presario 5WV280
900 mhz AMD athlon
Windows ME

256 MB RAM
30 GB HD
56k modem

Machine is pretty much as setup from Compaq, except we added 128MB RAM a couple of weeks ago for a total of 256 MB- no problems after that install. We also recently replaced the modem, the original modem died and it was replaced with a Diamond multimedia Supramax 56i PCI that my brother gave me. No problems with that after we got it installed + running.
The problem came up about a week after the modem replacement + RAM install.


I am using Netzero Dialup as my ISP.

The problem I am having is this. My PC is in (what I think is) Safe mode- low resolution display, giving me Error 24 "Display driver error". It tells me that I need to reinstall the display driver, or install an upgraded driver, because the current driver is either damaged or not correctly installed. It then prompts me to the "Installation wizard" to find a better driver- but when I go thru that procedure, it says I already have the best driver installed.

When I try to remove the display driver (thinking it might work to remove + then reinstall), it begins to go thru the process, then the system freezes- every time. I tried the HP/Compaq online tech chat, but they were not very helpful- everything they suggested, I had already tried without success.

When I check the status of my system, the display driver Icon comes up with a yellow exclamation mark- indicating there is a problem.

The system works for the most part normally other than the display problem- but it's really annoying.

Not sure if this is a hardware or software problem, but it's definitely a problem. Any help you guys can provide will be greatly appreciated. Let me know if you need any other info and I'll post it up.

Thanks!!

Rig.

Relevance 100%
Preferred Solution: Display error 24 - unable to solve...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Display error 24 - unable to solve...

What video card is in the machine? What have you tried? A typical test would be to remove the modem and ram again to see if that works. Optionally, theres a slim chance the video card went bad. If its onboard and using shared memory, I would suspect the ram. If its not onboard, maybe try another card. Problems like this require trial and error of removing hardware until you can narrow down the culprit.

5 more replies
Relevance 68.06%

This has happened to me once before when I had to re-image.  The drivers on the second partition do not detect the hardware for my laptop so I go to download them.   I have tried the NVIDIA ones and the Intel ones and neither detect my hardware.   I used the NVIDA autodetect tool and it found my driver, but when it went to install it it said again there was no compatiable hardware. I've tried all available x86 and 64bit drivers that are available. Is there something I'm forgetting about? I seem to recall having this problem once before when attempting to make the HDMI work and had to find the driver from an obscure source.   I do realize this issue is common and there are several forum posts on it already.  Their fixes just aren't working.

Answer:Unable to solve Display Driver issue with forum threads

Sorry stock U460

4 more replies
Relevance 51.66%

Hi there! I have the same problem. Today I've update my software by Lenovo updater and installed wireless display software, after I've rebooted my laptop and try to open the app I have this:  If it important my switched on radio divice as those:  What should I do to make WiDi to work? P.S.: I have  an original, not tablet version of x220 Thanks.   





X220, IPS, Intel Core i7-2620m, 8 gb, Samsung 840 pro 256 gb, eGPU + Zotac AMP GeForce GTX 670.









Solved!

Go to Solution.

Answer:Intel Wireless Display Unable to load DLL error

Hi EvgenyP!
 
The Intel My WiFi dll file is missing. To install it, download the Intel Wireless LAN drivers for the X220, and make sure that the My WiFi component is installed:
Lenovo Support - Intel Wireless LAN (bg, abg, abgn) for Windows 7 (32-bit, 64-bit), Windows Vista (3...
 
Hope this helps, and come back and tell us how it goes!

2 more replies
Relevance 51.66%

I have a new X220 tablet, out of the box with all software and driver updates applied and I am getting an error when trying to start the Intel Wireless Display (WiDi) software. When I run the software I get an Intel WiDi error box with the message "Unable to load the Intel My Wifi Technology DLL file." I have uninstalled and reinstalled the intel drivers and software using both the version available from Lenovo and the latest version on the Intel web site. I get the same error for all versions of the driver and software that I have tried.  I've seen comments about similar issues on the Intel communities forum but no fix has been published. I can't find any reference to a similar issue on the lenovo community forum or knowledge base. Has anyone else experienced this issue? Has anyone been able to get the Wireless Display software to work on the X220 tablet? Thanks

Answer:Intel Wireless Display Unable to load DLL error

hey DavidES,remove the Wireless Display software. download the version available from our support site but do not install it yet.set your windows to operate using Diagnostic mode via MSCONFIG. Once that is done, install the software while the unit is in Diagnostic mode.Check and see if the problem persist with Diagnostic mode and in normal mode.





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

3 more replies
Relevance 51.25%

I am unable to solve this BSOD. I looked at the how to diagnose thing, and I tried reinstalling drivers, but it didn't work. I have had this BSOD twice now, at seemingly random times. I am running Windows 7 Home Premium 64bit.

CX500 PSU, Zotac Overclocked GTX 560 TI 1GB, 16GB DDR3 Memory, i5 2320 Quad Core 3GHz, 1TB 7,200 RPM HDD.

KMODE_EXCEPTION_NOT_HANDLED
0x0000001e
Parameter 1-4 are all 00000000`00000000
Caused by driver: ntoskrnl.exe
ntoskrnl.exe+7cc10

6.1.7601.17640 (win7sp1_gdr.110622-1506)

From address: fffff800`0341b000
To address:fffff800`03a04000
Size:0x005e9000
Timestamp:0x4e02aaa3

Not sure what to do, someone please help!

Answer:Unable to solve BSOD.

try checking memory

Diagnosing memory problems on your computer

1 more replies
Relevance 51.25%

Hi, I recently came across a few issues but have been unable to fix them, I came across the issues when trying to install linux on a second partition.

The issue I noticed first is the failure to find a grdl.mbr file so the install of linux failed. I then noticed that the option to unsecure the boot loader was missing from the bios setup.

From then I tried to create a repair disc to get an error and also tried to make a backup but get an error 0x81000037 a shadow copy message.

So I'm unable to create a repair disc, unable to make a backup to both dvd and usb / harddrive and then the missing bootloader mbr file.

If tried using HP tools to make a backup but it just hangs and hangs on making a repair disc too, I've done an sfc scan with no errors, ran anti virus and anti malware scan to find nothing & check the registry to find nothing other than old program data which I removed to get all the same issues.

Sort of scratching my head here as every attempt to solve one specific issue leads to another.

HP Pavilion G Series
Windows 7 64bit
 

Answer:A few issues unable to solve them

9 more replies
Relevance 50.84%

There are Display Tune Exception errors in my PC. The message like this:  What's wrong in my PC and how to solve this problem? The warning window show up often times. Please help me.Thank you. 

More replies
Relevance 50.84%

So for the last day or so, my computer display is showing the 1280x768, however the recommended res is 1440x900.
However, after first starting the system, I have the 1280x768, and the 1440x900 isn't showing as an option.

I have to restart my computer, and the 1440x900 will be set as it should. I have the latest drivers from Nvidia for my Nvidia Geforce 750 GTX Ti.

Anyone have any ideas as to how I correct this, without having to restart my computer after starting it for the first time each day???

Answer:Strange display res happening. How to solve?

So I tested something today. Turned on the Monitor first, then turned on the computer and it has my recommended res set to 1440x900. Not sure if it worked or if the system worked it out. Will mark this as solved for now, if problem shows back up, I will repost.

1 more replies
Relevance 50.84%

So for the last day or so, my computer display is showing the 1280x768, however the recommended res is 1440x900.
However, after first starting the system, I have the 1280x768, and the 1440x900 isn't showing as an option.

I have to restart my computer, and the 1440x900 will be set as it should. I have the latest drivers from Nvidia for my Nvidia Geforce 750 GTX Ti.

Anyone have any ideas as to how I correct this, without having to restart my computer after starting it for the first time each day???

Answer:Strange display res happening. How to solve?

So I tested something today. Turned on the Monitor first, then turned on the computer and it has my recommended res set to 1440x900. Not sure if it worked or if the system worked it out. Will mark this as solved for now, if problem shows back up, I will repost.

0 more replies
Relevance 50.84%

I run a generic box based on the FoxCon Fireblade mobo. There are two internal WD6400 HDs, one with Vista Home Premium installed, the other with Win7 Home Premium. Please see the attached images for system and storage info.

My level of "expertise" is "average user" with abilities to tweak around under guidance from more experienced/educated users.

Ever since I installed Win 7 on the separate drive, this computer has experienced startup problems. With help from this forum, I changed the boot sequence to boot from HD and chose the HD with Win7 as the first device.

The changes seemed to work fine as long as the computer was put to sleep and reawakened or was restarted after installation of updates and new software. When the computer is shutdown and then powered up, it fails to start properly. The sequence takes me from the Fireblade splash screen to the bootloader screen where I can choose between Win 7 and Vista. If I hit Win 7, the next screen goes dark and the computer fails to start. If I choose Vista, the computer starts normally.

After such failure to start with Win7, I have repeatedly experimented with the settings choosing the Win 7 HD as the first boot device, disabling CDROM as a boot device, etc. Every time after such experiments, and after I save and exit the settings, the computer fails to start and a message saying "computer failed to start, insert system disk into cdrom, press any key to continue" appears.

If I go back to the s... Read more

Answer:Startup mystery - Unable to solve

Are the two hard drives jumpered identically? Look here:

http://www.wdc.com/en/library/eide/2579-001037.pdf

What happens if you unplug the Vista drive? Does Windows 7 boot reliably every time?

2 more replies
Relevance 50.84%

I'm getting popups from WinAntivirus and other popups. the other ones consist of "your computer is running slow...etc" and there are some random ones like expedia and cashdirect or something like that. Can anyone help me out?

Here is my HJT log

Logfile of HijackThis v1.99.1
Scan saved at 3:23:04 AM, on 5/5/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\System32\S24EvMon.exe
C:\WINNT\system32\spoolsv.exe
C:\WINNT\System32\Ati2evxx.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\Network Associates\VirusScan\Mcshield.exe
C:\Program Files\Network Associates\VirusScan\VsTskMgr.exe
C:\WINNT\System32\RegSrvc.exe
C:\WINNT\System32\svchost.exe
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\WINNT\system32\ZCfgSvc.exe
C:\WINNT\Explorer.EXE
C:\WINNT\System32\1XConfig.exe
C:\Program Files\Synaptics\SynTP\SynTPLpr.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINNT\GWMDMMSG.exe
C:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exe
C:\Program Files\CyberLink\PowerDVD\PDVDServ.exe
C:\Program Files\Network Associates\VirusScan\SHSTAT.EXE
C:\Program Files\Network Associates\Common Framework\UpdaterUI.exe... Read more

Answer:malware unable to solve. HiJackThis log. Please help

15 more replies
Relevance 50.43%

hi, im actually having trouble with the browsers that someday display certain webpages and some day not, the message that display its :"Could not locate remote server" Opera"Name_not_resolved" Chrome"The Domain Name Server (DNS) is not reachable." Explorerim running Windows Vista Home Premium 32b, Bitdefender antivirus 2010, Windows firewalli think im infected with some virus cause recently deleted the worm.brontok detected by ad-aware runinng in safe mode and deleted with sophos brontok removal tool.i have tried to flush dns after that and nothing happens, i have read the prepare your pc for removal forum but when i tried to run gmer the computer freeze and display the BSOD (blue screen of death).how can i solve this?hi thanks for your help, this is the dds and attach logs.Merged posts and removed my reply. ~ OB

Answer:Browsers cant solve dns and Gmer display BSOD

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.In the upper right hand corner of the topic you will see a button called Options. If you click on this in the drop-down menu you can choose Track this topic. By doing this and then choosing Immediate E-Mail notification and then clicking on Proceed you will be advised when we respond to your topic and facilitate the cleaning of your machine.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The ... Read more

11 more replies
Relevance 50.02%

New Lenovo thinkcentre M73 model 10B6001SUS, OEM install win7pro 64bit sp1 (pre-installed by manf),
8gb ram (2 x 4gb ea)
I've tested the RAM using memtest86+ v5.01 no errors. Windows list the 8gb.
RAM Crucial one CT51264BD160BJ.C8F the other CT51264BA160B.C16F
BIOS version FCKT73AUS
Boot Block Revision Level 1.73
I've updated the NIC driver to the latest realtek driver. Windows updates list last one was installed and only 1 optional one not installed.

I've uninstall Norton and I'm using AVG Free 64bit build 16.81.7639, nothing found. Checked for root kits.

I've attached a copy of the DM log & the minidump folder

Not sure what is the root cause, nor how to read the logs

Thanks for any guidance you can give.

Answer:win 7 pro 64 bit several BSOD in the past two weeks unable to solve

Welcome to the forum,

Did you put the Crucial RAM in? Your earlier dumps show one Crucial and one Samsung module.

Your last dump does show both Crucial though. Are they a matched set? I get different results searching the part numbers.

Did you run Memtest86+ for 8 passes? That is the definitive test length.

Your last dump is flagging AVG,


Code:
Unable to load image \SystemRoot\system32\DRIVERS\avgidsdrivera.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgidsdrivera.sys
*** ERROR: Module load completed but symbols could not be loaded for avgidsdrivera.sys
avgidsdrivera+0x130f1
You can try uninstalling that for now and just use MSE for the time being, to see how it acts.

Someone else might come along with more info, that's just what I saw.

1 more replies
Relevance 50.02%

I have an odd NTFS problem on one of my external hard disks. I have at least two jpeg files on the drive that appear as though they are sub-directories instead. I don't know how this happened, and I only detected it a few days ago. They are in different directories. Instead of appearing as a file (normally the archive bit set, or 0x20/$20) instead, they have the directory and archive bits set (0x30/$30). I have tried everything I can think of to remedy the problem, including downloading the evaluation copy of "DiskExplorer for NTFS" this weekend, and manually editing the MFT for the file to change (in at least 3 places) the attribute manually (which seemed like it could work in theory), but when the changes were written back, the problem persisted. I also tried 'chkdsk /f /r', which took approximately 24 hours (its a 3TB USB drive) to complete, which indicated no errors. windows refuses to delete it as a directory (because it isn't), and it won't treat it as a file either. when "DiskExplorer for NTFS" views the file/directory, the picture pops up on screen as normal. I tried file assassin and other programs as well, but that also was a no-go.
 

Answer:Weird NTFS problem that I have been unable to solve

As an update to my original post, it turns out that the problem seems to be caused by a bug in the firmware of the Western Digital TV Live Plus. I have yet to find a solution, but I am told that even if the problems are repaired, they will eventually happen again.
 

1 more replies
Relevance 50.02%

I have a Y570 purchased in September 2011.  I recently had to reinstall my OS back to factory state using the Lenovo "One Button System Restore" process.  The restore seemed to work fine.   Prior to the OS reinstall, my Intel Wireless Display was working great with my TVs' wireless display adaptors.  Ever since the OS reinstall however, when I launch the Intel Wireless Display I get this error message:  "Unable to Start My WiFi Technology"  My WiFi connection still works -- I can connect wirelessly to my home's wireless router. It's just the Intel Wireless Display program that will not launch. In the taskbar, if I right-click on the "Intel My WiFi Technology" icon, and then try to click on "Enable"  (or if I click on the "Intel My WiFi Utility) I get: "Intel My WiFi Technology has been configured with a non-supported profile.  Instead, the default profile will be used."  There are no profiles listed -- it's a blank list. I cannot figure out what's wrong -- why it's no longer working.













Solved!

Go to Solution.

Answer:"Unable to Start My WiFi Technology" (Intel Wiress Display) Error After OS Reinstall

 Here is a link to your model's drivers http://consumersupport.lenovo.com/in/en/DriversDownLoads/APR_Driver_List.aspx?CategoryID=867235&OS=0 Open tab: Networking: Wireless LAN (6)  Download and update all drivers.  Restart unit & let us know what happens. 

4 more replies
Relevance 49.61%

I am still unable to get rid of the search page-
http://www.windowws.cc/hp.htm?id=9. I also have websites in my favorites folder I did not put there. I have read and re-read the tech-guy forums and nothing has worked for me.
I have downloaded and ran, spybot s&d, adaware and cwshredder. None of them have worked, they all find problems and say they fix them, but when I get on the Internet, the above website returns along with more unwanted websites in my favorites.

I have a Sony Viao computer with Window's xp home edition. I have also gone to the window's update website and downloaded all critical updates. However when I look at the download history it show's that the Window's xp sp1 did not completely update. When I try to download it again, the windowws.cc website takes over. I also have norton systemworks 2004, antivirus program installed on my computer.

I have called Netzero, my provider for help and they advised me to put the websites, www.windowws./hp.htm?id=9, and www.spider-search.com , in the restricted websites section. the windowws site says it is another zone and I can not block it and the spider-search just comes up with an empty page.

I have also called sony and paid for tech. support at they had me do stuff with the MSCONFIG, and safe mode and neither worked. I'm worried my computer is completely ruined. Any Help will be greatly appreciated.
Thank you, Terrilee

Attached is my HJT file.

Logfile of HijackThis v1.97.7
Scan saved a... Read more

Answer:[solved]Unable to solve Hijacked computer problems

16 more replies
Relevance 49.61%

Hi People!!

I have been a member of this forum and most often I have found a solution by just searching but today I have a problem which I have not been able to find a solution for, therefore I am listing my problem.

I have win7 installed on a desktop since 3 months now, it was working fine till yesterday evening but don't know what happened, it was loading windows.

Basically what is happening is that it is booting fine, then the windows logo comes and after that I get a black screen with mouse cursor, whereas it was supposed to have the login screen.

Now I had this same problem 3 months back with the same computer but then I was unable to solve it using the MBR repair commands and so I formatted the drive C of my computer then.

Now I am determined not to format the DRIVE C, so I went to the command prompt using system repair tools from the DVD and went into DISKPART. When I selected disk 0 which is the only disk installed and entered detail disk this is what I got:

Disk ID= SOmething
Type=ATA
Status=Online
PAth=1
Target =1
LUN ID=0
Location Path= Something
Current Readonly State = No
Read Only= No
Boot Disk=No
Pagefile Disk = No
Hibernation File Disk= No
Crash Dump Disk= No
Clustered Disk = No


-----------------------------------------------------------------------------
Volume|#| Ltr | Label1 | FS | Type | Size | Status|
Volume|1| C | System Rese | NTFS | Partition | 100 MB | Healthy|
Volume|2| D ... Read more

Answer:Unable to BOOT Windows MBR repair does not solve the Problem

I have managed to remove the drive letter of the system reserved partition and assign letter C to the D drive. But then I got a message on rebooting BOOTMGR missing press CTRL+ALT+DEL. Then again I have tried to repair the bootmgr by BOOTREC/fixboot, this removed the BOOTMGR missing error but got me back to where I started, that is, a BLACK screen after windows 7 logo.

I am still not able to get the LOGIN SCREEN don't know why? Please help.

2 more replies
Relevance 49.2%

I need to know before I buy a new videocard because my main driver is ialmrnt5 for my current videocard. My driver is Intel82865G.
I have problems with my main driver ialmrnt5. The screen freezes for 10 seconds then everything goes 4-bit and the color quality is very low.
I've tried formatting my PC twice, updating my driver, set my BIOS settings from PCI to Onboard/AGP....
Will getting a new videocard solve this problem? I plan to buy Geforce. I don't want my money to go to waste.
Please help!!!!
 

Answer:Will buying a new videocard solve my ialmrnt5 display driver problems?

Sounds like the onboard GPU may be on its last leg. When you install a graphics card the integrated unit gets disabled (you will probably need to do this yourself) so it will definitely fix the problem. -But before you go buying something we need a bit of information first, like your budget, power supply specs, and graphics bus type (AGP 4x or 8x).

Before you install a new video card, you need to uninstall any existing display drivers and disable the onboard device. Once this is done, you can install the new graphics card and boot the system normally. Download and install the latest drivers for the card and restart the computer. You should be done after that.
 

2 more replies
Relevance 46.33%

Have had att internet and e-mail for years with Internet Explorer as browser.  Problems began with changeover att made to home page powered by Yahoo.  Now, virtually nothing works.  Even though I connect with att connection manager and little blue world says "connected", most of the time any thing I try to look up i get the message "unable to display page"  Reason given is "a cable is not plugged into the local area connector"  What does this mean?  No one has ever been able to give me an answer.  Even though I sometimes finally get into my e-mail, it is very difficult to get any messages to open on the first, 10th, or 25th try.  PLEASE HLP ME!  Can someone e-mail me back with suggestions?  Thank you.

Answer:Constant error message "unable to display page"

Iola Glista, Welcome to the CH forums. There are a number of options that you could try to solve your issue. However if i were in your shoes given that your ISP (att) has recently changed something re their service i would contact their tech support and see if they will help you to solve your problem. If you have and they haven't then please tell us so and we shall proceed from there. truenorth

2 more replies
Relevance 46.33%

Hi Folks,

My elderly mother somehow crashed her e-mail, and I'm trying to fix it for her. It is a Comcast.net pop mail server. She clicks the Live Mail icon on her desktop and the mail would open.

She could still go to Comcast.net on the web and get into her e-mail but that is too complicated for her. So I need to get it working from her desktop.

After the crash when the mail opens from the desktop icon all folders (inbox, sent etc.) have the error message "Unable to display folder".

I want to uninstall all current mail installed then install anew. I tried this but then the new Live Mail reverted to her old settings etc (I don't know how that happened), and hence the same error message. So I must not have uninstalled all of the old e-mail.

Can anyone please help as to the easiest way to get her live mail from the desktop icon working again?

Thank You

Answer:Live Mail crashed. Now error mssg " Unable to display folders"..?

Do you sense that your nice Mom's old mailboxes are still around? Or, have they been deleted by now? Reason for asking: I know where in [user] AppData Local and Roaming where the Mozilla Thunderbird doodads, doohickies, and mailboxes are. I'm hoping Windows Live Mail does the same thing. If so, it's possible to reconstruct from any recent restorable folders/files backup. If no backups, then, I don't know any further.

1 more replies
Relevance 46.33%

When ever I try to go to a login page of any site Yahoo, Bank sites, ...
I get the internet explorer can not display page error
I know this is not uncommon but I can not seem to shake it
I don't know where to turn???

Help

[email protected]
 

More replies
Relevance 46.33%

hi all, i've downlaoded my display driver and i'm trying to install it. the install instructions by lenovo are:Right-click the desktop and select Properties from the pop up menu. 3. Select the Settings tab. 4. Click the Advanced button. 5. Select the Monitor tab. 6. Click the Properties button. but the properties button is not active. i've also tried to install the driver using the Hardware wizardbut it dosnt recognize the driver file and outputs the message :"the specified location does not contain information  about your hardware" with out the display option im unable to use the Fn+F7 key to switch display modes.. HELP!!  

More replies
Relevance 45.92%

I had a folder on my Desktop that just won't delete. I tried deleting it and moving it to another location. It deleted everything within the folder, yet the folder still remained.

I've been having the problem of my Desktop not updating when files/folders are deleted, so I have to manually refresh after a delete to show it gone. Well, the folder decided to stick around. I tried Renaming, Deleting, changing Folder Permissions, Reboot of the Computer.....Nothing seems to help.

If I try to open the folder, I get a "Location is Not Available" along with the "Access Is Denied" error. Going to Properties>Security prompts me that I don't have permission to view or edit permission settings. Under Advanced says the same thing and for Owner it says "Unable to Display Current Owner."

I'm running Windows 7

I have tried looking as some of my questions seem silly most of the time - I looked at the link - Take Ownership Shortcut

I hope that I have done it correctly.

I have trialled it on my desktop and it comes up with a CMD screen and then moves the file. When I extracted the .reg it warned me that it would alter some .tmp files - I read the tutorial and I thought that what I did was fine. I know not to take ownership of Windows 7.

I hope the following information assists and I just want assurance that I did it correctly or if I should have tried another means.

I would rather know that I have done something or I will try extracting to remove ... Read more

Answer:Unable to move file from desktop - Security Tab - Unable to Display

Try Unlocker. It's always good to have anyway. I've found it very stable and safe to use.

2 more replies
Relevance 45.92%
Question: Help Solve error

so i installed win7 rtm, launched it, it detected something and asked for reboot, i've rebooted and, when i log in i dont see anything but wallpaper, just wallpaper, no START menu or anything, when i'm logging in Safe Mode, i can see start menu, etc, how can i solve this issue

Answer:Help Solve error

Not sure. What happens when you right click on the desktop (wallpaper)? Can you tell what screen resolution has been set to?

2 more replies
Relevance 45.92%

RM1090_02074.00000.15234.28006_RETAIL_prod_signed_1001_025CA7_000-IN.ffu

Answer:How to solve this Error?

That's not an error, that's an image file for a Lumia 535.

more replies
Relevance 45.92%

Error -107 when loading url https://www.staysure.co.uk/travel-i...This is the message I get when I try to go into various sites.Please can you tell me how to solve it.Thank youJeannine

Answer:How to solve error 107.

URL worked fine on my Win 10. What browser are you using and is it the same on alternatives?Please give the full error message off the screen (I was unable to find any reference to it).Always pop back and let us know the outcome - thanks

2 more replies
Relevance 45.92%
Relevance 45.92%

I am unable to install Tweak UI(MS power toy),because when i attempt to do so the message appeare and says:"The produce entry point GetllDirectoryW could not be located in the dynamic link library KERNEL32.dll."

please some1 guide me to solve this problem.

Thanks in adavance.

Answer:How can i solve this error!!??

in the run box type
sfc /scannow
and press enter

10 more replies
Relevance 45.92%

I installed "HTC Home" desktop gadget in my PC then windows error reporting shows this error. How do i solve this error.
"Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: update.exe
Problem Signature 02: 2.0.9.0
Problem Signature 03: 4de78899
Problem Signature 04: System.Xml
Problem Signature 05: 4.0.0.0
Problem Signature 06: 4ba1dfec
Problem Signature 07: 710
Problem Signature 08: 27
Problem Signature 09: System.Xml.XmlException
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
"

Answer:How to solve this error?

Please help me! I face this error every time when i start my PC.

1 more replies
Relevance 45.92%

Hi,
Question Re: XPS 8700 with Windows 8.1.  if computer is no longer able to boot into Windows.
And Restore is not able to correct issue. 
And Refresh is unable to correct issue.
But Dell Backup and Recovery indicates no issues were found and now asks to Reinstall Operating System.
is Installation Restore/Original Image Media required to complete the Reinstallation usind Dell Backup and Recovery?
Alternatively if the Reset My PC option is used is Installation media required?
Thanks.

More replies
Relevance 45.92%

recently purchse my first levono product to replace my 6yr old macbook pro that died recently.goal was to get something decent for both work and gaming Yet this is shocking when I start doing some photo editing and some webbrowsing. the yellow basically all looks like have some green tan on them Now, this picture is directly taken via print screen on y50-4k, for reference Link to image 1  at full brightness Link to image 2 Now when I dim the screen below 50%there is basically no yellow  Link to image 3  I did my search via watching reviews, and never heard of this issue.  Yet once I noticed the yellow color issue, I googled and found it's wide spread issue. So I would like to know if levono aware of this issue, and if there are any plan to fix the issue.  Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums 

Answer:y50 4k, the display is simply unable to display yellow color

I guess it's either lenovo doesn't care or they are simply not capable of fixing this issue. I will give it couple more day before I file complaint to FTC.

3 more replies
Relevance 45.51%

When i press ctrl+f in Internet Explorer, and type some thing i get an error, I posted a screenshot of it. Does anyone know what might be causing this?
 

Answer:[Solve] IE Search Error.

10 more replies
Relevance 45.51%

every time i click on games the error code comes up and only relates to games not installed. solitaire and 4 others are installed but the others are not.

Answer:How do I solve error code0X80072EFF?

Hi - I don't know what device or OS you are using (always better to add that info in your question).
HOWEVER - when I searched this in Bing, it looks like you might have a pretty bad virus. This link is where I found the information and has a few options for you:Error Code: 0X80072EFF - Microsoft Community
Good luck!

2 more replies
Relevance 45.51%

I trying to solve this MS exchange server error but i can solve it. i want to repair my EDB file form exchange server because it is very useful for me. view the problem it here:



So please give any solution for this type of problem....!
 

More replies
Relevance 45.51%

Hii, my new phone nokia lumia 535 windows store any on app download error are 80070490 how to solove??????????????

Answer:How do I solve the error 80070490?

See my reply over here: http://forums.windowscentral.com/ask...oad-error.html

6 more replies
Relevance 45.51%
Question: Solve Backup Error

Using Backup & Restore, this is the third night I got backup errors (red X), but the first time I saw the message.

"Backup failed on shadow copy on source volume got deleted. Might be caused by high write activity on the volume.
retry backup.. Consider increasing shadow copy storage using VSSADMIN resize shadow storage command.
Error code 0x80780169."

Retrying will be futile. Somebody suggested increasing the volume to 15%. There is very little information online.
Any suggestions? Should I increase the volume? I have never gotten this message in the years that I have been using Backup & Restore.

I am just supposed to be backing up my files; not creating an image, unless it copies to the disk regardless of what I choose to send to external drive.

In Event Viewer there were at least a half-dozen messages that the oldest volume was deleted. According to "Manage your space," I think I have one image on the drive and another image in backup, but I don't know if I can trust the info.

Thank you.

More replies
Relevance 45.51%

https://docs.google.com/file/d/0BziMjhKC5sVTZmZpQnh2NUtkSm8/edit?usp=docslist_apiThis is the link to the photo













Solved!

Go to Solution.

Answer:What is the watchdog error and is there a way to solve it ?

A watchdog is a piece of code in Windows that measures the execution time of commands. If a critical command takes too long to execute, Windows will generate this code. It is generally caused by hardware-related issues with critical components such as an SSD or core drivers.
 
Are you up to date with all of your system's drivers?
 
support.lenovo.com/en/products

2 more replies
Relevance 45.51%

need settup.hlp to run excel

Answer:how to solve error 1706 ?

First hit on Google:http://support.microsoft.com/kb/297834Second hit on Google:http://support.microsoft.com/kb/253768MIKEhttp://www.skeptic.com/

2 more replies
Relevance 45.51%

Okay i really dont know how to solve this issue, it happens today and since then whatever i do (restarting or shut down my pc) nothing helps...
i cannot login to win 7... i can right click and refresh but i cannot open any application... when i open My Computer... the loading takes forever... can somebody help solve this?

I tried to do what this web suggests :

Fix for COM Surrogate Has Stopped Working Error in Vista - How-To Geek

but i cannot go to the advance setting area... it just takes all forever... its like the explorer is crashing... please help on how to solve this? i dont want to format or anything... and i dont know what is wrong... basically i just browsing media files while the error occurs for the first time please i need immediate help...

Answer:please help to solve COM SURROGATE error

Do the following steps.Get to the Advanced Boot Options screen.
Start the computer in Safe Mode.
Troubleshoot Application Conflicts by Performing a Clean Startup.
Restart in normal mode and see if there is an improvement.

9 more replies
Relevance 45.51%

I'm using a Lumia 520.Synchronisation with Exchange is not possible and I got this erre number

Answer:How do I solve the error 85010004?

The first thing to check is whether your device is set to the correct date and time. Is that so?

2 more replies
Relevance 45.51%

Error caused by a device driver

Thank you for sending an error report to Microsoft.

Error report summary

Error type : Windows stop error (A message appears on a blue screen with error code information)
Solution available? : No (see Next steps)
What does this error mean? : Windows has encountered an error from which it cannot recover and needs to restart
Cause : Unknown device driver
Computer symptoms : A message appears on a blue screen with error code information (for example: e.g. 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED)
Additional steps for you to take : Important: Please continue to send error reports so analysts at Microsoft can study and try to correct the problem as quickly as possible

Information about this error

You received this message because a device driver installed on your computer caused the Windows operating system to stop unexpectedly. This type of error is referred to as a "stop error." A stop error requires you to restart your computer.

Next steps

We have analyzed your error report and at this time are unable to determine the exact cause of the error. However, Microsoft will continue to analyze this error report to try to determine the specific cause of the error. If we are able to find the cause and correct it, and you encounter the same problem, you will receive an updated response that includes instructions for resolving the problem.
 

Answer:Any ideas to solve this error?

Did you change anything before that error started occuring? Such as new hardware etc?

Regards,

Korrupt
 

3 more replies
Relevance 45.51%

win10 builds 10856 suddenly reloads many times and give me various messages about errors IRQL_NOT_LESS_OR_EQUAL, then another time video_shedullar_internal_errors, 3-d Prodess_initualisation_failed, 4- 0x000021a, 5 - critical_process_died_ 6 - system_process_misuse. How can I solved all these problems. Thank you very much for Your work. Nikolai Skorokhodov. Russia

Answer:IRQL_NOT_LESS_OR_EQUAL - what does this error and how do I solve it?

Can you please join and provide the more information on what you were you trying to update (Presuming you were trying to install TH2 / Fall Update) i.e desktop, tablet, all in one, laptop etc

5 more replies
Relevance 45.51%

whenever i open my system a message box is appearing in the desktop showing"Cannot find script host,cannot find c\windows\winsys64.vbs".I am very much frustrated by this.So please post a solution immediately.

Answer:request to solve error

whenever i open my system a message box is appearing in the desktop showing"Cannot find script host,cannot find c\windows\winsys64.vbs".I am very much frustrated by this.So please post a solution immediately.

3 more replies
Relevance 45.51%

my msn can't sign in 2 weeks im trying sending error 800488fe plz help me solve that issue

Answer:how to solve msn error 800488fe plz

http://windowslivehelp.com/solution...

2 more replies
Relevance 45.51%

i have made the TSF_Vista_Support.zip file please take a look on it and help me

i have :

processor of 2.4 core 2 due

1.5 GB of ram

ATI HD4650

Answer:please help me to solve BSOD error

These are STOP 0x124 errors - which are generated by the CPU and then reported to Windows. Not very easy to read.

That being said, they are most often related to hardware failures or compatibility issues.
Have you run the Windows Vista Upgrade Advisor (free here: http://www.microsoft.com/windows/win...e-advisor.aspx ) to see if that's an issue?

Have you added any new hardware/software recently that might be causing a problem?

5 more replies
Relevance 45.51%

windows boot managerSystem failed to start. Recent hardware or software change might be the cause.Then I get three options. But it keeps returningg me to this screen. Please help. Thank You

Answer:How do I solve the startup error?

1- are those the messages you get? 2- Did you try the repair my computer option and then use start-up repair?If you don't have a restoration disc you can download and make one at the following address:http://neosmart.net/blog/2008/windo...Some HELP in posting on Computing.net plus free progs and instructions Cheers

2 more replies
Relevance 45.51%

please sir,reply me that the way of how to solve run-time error 339. thanks

Answer:How to solve run - time error 339

... click here for fix explanation.... (do'nt download anything!).... Posting is provided "AS IS" with no warrantieshttp://img692.imageshack.us/img692/...Grrrr... ...im

2 more replies
Relevance 45.51%

Hi

Genuine windows error keeps popping up and I can't figure how to solve. Copy of diagnostics below. Any step by step help would be greatly appreciated, as Microsoft's solution is to buy another activation code it seems!


Code:

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-WJ2H8-R6B6D-7QJB7
Windows Product Key Hash: ckKNc+BBPDWmo1LUlOkraNjlQ34=
Windows Product ID: 00359-OEM-8992687-00006
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {B839CF76-018F-48B7-877A-3C5732677C7E}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Mi... Read more

Answer:Can anybody help me solve 0x8004fe21 error

If KB3004394 is installed - uninstall it, reboot twice, then post a new MGADiag report
...note that Windows Update will then detect a new version of KB3004394 to be installed - this should not cause problems.

9 more replies
Relevance 45.51%

been waiting for almost a week for a code to verify my account and i still haven't received it till now

Answer:how to solve error 800488fe?

Allow me to be the first to ask....What are you talking about?

4 more replies
Relevance 45.51%

how to solve error 711 suddenly my net off help me. I watch many videos on youtube but its not get successful ive me solution

Answer:tell me all types to solve this error

http://windows-exe-errors.com/fix-e...

8 more replies
Relevance 45.51%

Hi all,I have bought a game called Warcraft III a while ago. It worked on my former computer, which was a Windows XP Professional Home Edition.Now, this pc was taken by my dad and now I have to work with this Windows XP professional. (Not a home edition and it's a laptop).I tried to install the game again. It worked. Now I tried to run, but everytime it's about to load the main menu, it crashes and following error appears :Now, is there any way to solve this? If so, how?And what does the error means to by the way?Would appreciate help.Cheerz,Baldir

Answer:Annoying Error? How to solve? (if possible)

Is the game downloaded?

10 more replies
Relevance 45.51%

I get this error and i don't know how to solve!! pls help!
Say if you need more information ...

Win 7 64Bit -> installed on SATA HDD
I tried to install Win 8 64Bit on an IDE HDD which is also in my pc
greets.mowh

Answer:I get this error in VirtualBox and i don't know how to solve

I had this error too. Try deleting the virtual machine and then rebuilding it, using a static drive instead of Dynamic. I allocated 20gb and the issue went away.

1 more replies
Relevance 45.1%

imagedit.ocx or one of its depenencies not correctly registered

Answer:how to solve imagedit error message

Simply correctly register imagedit.ocx or one of its depenencies.Try reinstalling the associated application.Bryan

3 more replies
Relevance 45.1%

When I am surfing the web or watching a film, my computer may place still and do not reply without any indicates. It may revolve into blue screen in seconds if I click or press buttons repeatedly. So, what can I do to prevent computer go blue screen or what is the finest method to improve my computer performance in minutes?

Answer:How to solve a blue screen error?

This program will work out the problem & then provide links to possible fixes.WhoCrashedhttp://www.softpedia.com/get/System...http://www.softpedia.com/progScreen...http://www.resplendence.com/main

3 more replies
Relevance 45.1%

A runtime error is a software or hardware problem that prevents a program from working correctly. Runtime errors might cause you to lose information in the file you're working on, cause errors in the file (corrupt the file) so you can't work with it, or prevent you from using a feature. Unlike stop errors, runtime errors don't typically cause Windows or a program to stop working.
Runtime errors can occur if you are running two software programs that aren't compatible, if your computer has memory problems, or if the computer has been infected with malicious software. If a runtime error keeps occurring, follow these steps:
1. Install the latest updates for Windows and for the program displaying the error. Note that the update for the program might be listed as an optional update on the Windows Update page. Click Start button then show all programs and open Windows Update.
2. Check Action Center for a solution to the program displaying the error.
When you have Windows Error Reporting turned on and a program stops working, a problem report is typically sent to Microsoft for more analysis. If a solution is available, or there are steps you can take to minimize the likelihood of the problem recurring, they'll be available in Action Center. Click to Flag icon in Notification area to open Action Center.
3. Update and run your antivirus software. Windows doesn't come with antivirus software, but Action Center can often monitor the antivirus software that you or your ... Read more

More replies
Relevance 45.1%

Hi,
this error just came up this morning after I removed delta-search from both of my browsers,Internet Explorer and Google Chrome using adwcleaner. The problem start right after I run Malwarebytes. The whole desktop is not responding after an hour and I get blackscreen whenever I logon to my account. I solve this blackscreen problem by the help of this thread, http://http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/safe-mode-works-but-i-cant-log-on-to-the-normal/6e877026-3f55-4ca0-a458-aecdea54926e .

The only services that is being disabled is shown in this picture:

After I solved the blackscreen problem, I get this error which said:
[*]"There was a Problem Starting C:\ProgramData\Malwarebytes'anti malware\cleanup.dll"
[*]"The specified module could not be found"

And I click 'Okay'.

Whenever I enable the MBAM services, I always get this 'blackscreen'. Any idea on fixing it?

P.S Sorry for my bad grammar

Answer:How do I solve missing 'cleanup.dll' error ?

Nio,

Please do the following...

Download the Farbar Recovery Scan Tool
Select the 64-bit version.

Save to the Desktop. Double-click the downloaded file to run it.
When the tool opens click Yes to disclaimer.
Press the Scan button.
FRST64 makes a log (FRST.txt) in the same directory from which the tool is run (Desktop).
Please provide the FRST.txt in your reply. <<---


The first time the tool is run, it also makes another log: Addition.txt
Also post the Addition.txt in your reply. <<---

9 more replies
Relevance 45.1%

Hi..

Info :-

Windows XP Home edition with SP2

Im assuming its becuase of SP2 but not sure of the fix..

Im trying to load a CD (1 - 2 years old) its a Weight Watchers Points Plus CD , it used to run fine a couple of years ago but now for some reason it wont allow me to open up the program once installed. Installation is fine but I get the following erors upon running the .exe

Any ideas ?





This is the log file that is created..

<?xml version="1.0" encoding="UTF-16"?>
<DATABASE>
<EXE NAME="wwde.exe" FILTER="GRABMI_FILTER_PRIVACY">
<MATCHING_FILE NAME="wwde.exe" SIZE="5721340" CHECKSUM="0xB7F4751E" BIN_FILE_VERSION="5.3.0.0" BIN_PRODUCT_VERSION="5.3.0.0" PRODUCT_VERSION="5, 1, 0, 0" FILE_DESCRIPTION="Authorware Runtime" COMPANY_NAME="Macromedia, Inc." PRODUCT_NAME="" FILE_VERSION="5.300" ORIGINAL_FILENAME="" INTERNAL_NAME="" LEGAL_COPYRIGHT="1987-1998, Macromedia, Inc." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="5.3.0.0" UPTO_BIN_PRODUCT_VERSION="5.3.0.0" LINK_DATE="09/12/1999 19:15:51" UPTO_LINK_DATE="09/12/1999 19:15:51" VER_LANGUAGE="English (Uni... Read more

Answer:Runtime Error , failed to solve..

9 more replies
Relevance 45.1%

I had windows 8.1 pro already but decided to make new clean installation.
I downloaded the iso from here: Creating installation media for Windows 8.1 - Windows Help
I clicked on Creating media downloaded the iso file to my hard disk and burned it to a dvd.
Then in my pc booted from the dvd in the windows setup i deleted the C: partition and created it again so i don't have any windows to restore back my mistake.
Then i continued entered my windows serial number then it collected files...On the third step it throw this error:
windows could not set the offline locale information. error code : 0x80000001
I don't have a clue what is the proeblem.
I googled some say hard disk failure some say language setup is wrong so i tried to selected uk for time...and keyboard then uk and hebrew since im in Israel.
Then i tried us . In all cases it didn't help same error.
Any ideas what is the problem ? And how to solve it ?
I'm now on my laptop i can download and burn the windows again but how do i know if the problem will not come again ?

Answer:How to solve error: code : 0x80000001 ?

Check the date and time in BIOS setup, make sure it's correct. Also check the Time Zone.

8 more replies
Relevance 45.1%

Do I wanted to know if anyone can help me to fix the error 0x800f081f Dism/online /Cleanup-Image /RestoreHealth?

Thanks a lot.
Best regards.

Answer:How to solve the error 0x800f081f Dism?

Resolution

For Windows 8.1, Windows 8, Windows Server 2012 R2 or Windows Server 2012

To resolve this problem, use the inbox Deployment Image Servicing and Management (DISM) tool. Then, install the Windows update or service pack again.
Open an elevated command prompt. To do this, swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search. Type Command Prompt in the Search box, right-click Command Prompt, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.Type the following command, and then press Enter.
It may take several minutes for the command operation to be completed.DISM.exe /Online /Cleanup-image /Restorehealth
Important When you run this command, DISM uses Windows Update to provide the files that are required to fix corruptions. However, if your Windows Update client is already broken, use a running Windows installation as the repair source, or use a Windows side-by-side folder from a network share or from a removable media, such as the Windows DVD, as the source of the files. To do this, run the following command instead: DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess
Note Replace the C:\RepairSource\Windows placeholder with the location of your repair source. For more information about using the DISM tool to repair Windows... Read more

5 more replies
Relevance 45.1%

i m using window xp sp-2..suddenly at the running time my pc stopped..n now not working..m trying to format it...but when i m trying for format and press enter for format it just restart the pc..so i dnt knw wat should i do..??

Answer:how to solve window xp formatting error...

See response 2 in this - try cleaning the contacts on the ram modules, and making sure the modules are properly seated:http://www.computing.net/hardware/w...For a laptop, or netbook, you must remove both its main battery and AC adapter before you do that.For a brand name computer, see the Owner's or User's manual if you need to - how to remove or replace the ram is usually in that - it may already be in your installed programs. If you can't get into Windows, it may be on a disk that came with the computer, or you can go online and look at it or download it - it's in the downloads for your specific model. For a generic desktop computer, see the mboard manual if you need to - how to remove or replace the ram is usually in that. ......Check your hard drive with the manufacturer's diagnostics.See the latter part of response 1 in this:http://www.computing.net/windows95/...If you don't have a floppy drive, you can get a CD image diagnostic utility from most hard drive manufacturer's web sites, but obviously you would need to make a burned CD, preferably a CD-R for best compatibility, on another computer if you need to.E.g.Seagate's Seatools will test any brand of hard drive.Do the long test. http://www.seagate.com/ww/v/index.j...The bootable Dos versions of SeaTools can be used even if Windows is not working properly.If the hard drive itself tests okay, any data problems found can be fixed, one way or another.........If the hard drive itself tests okay.........Re-installing Windows... Read more

2 more replies
Relevance 45.1%

I am Using Windows 7 Ultimate

When ever i play games my Pc get a blue screen and reboots and tells me windows have recovered from an unexpeted shutdown and gives me this error message grrrrr

I already have formated and reloaded my pc 4 times then, I downloaded windows 7 sound driver for my mother board and graphics card and it still does the same, so I downloaded drivers for Vista and still the same result, I did test my hardware they are all working and not over heating and my windows is updated so, I am out of options please advice me what to do

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057
Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 866D0024
BCP3: B62C4000
BCP4: 00000135
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\102809-20421-01.dmp
C:\Users\Terran\AppData\Local\Temp\WER-31718-0.sysdata.xml

Answer:How can i solve this blue screen error ?

Please zip up the contents of the C:\Windows\Minidump folder and upload/attach the .zip file with your next post.

A STOP 0x124 error is an error that's identified by your hardware - which then notifies Windows about it. In most cases it's a hardware failure or an incompatibility.

So:
- check to ensure that your BIOS and drivers are updated to the latest versions
- if you've been inside the case recently - go back in and reseat everything (I got a STOP 0x124 because of this yesterday).
- Run the Windows 7 upgrade advisor to see if it pinpoints any possible compatibilty errors (free from here: http://www.microsoft.com/downloads/d...displayLang=en

The memory dump file(s) will be used to see if there's any other issues, and to see what older drivers are loaded when the crash occurs.

9 more replies
Relevance 45.1%

Hi,
I've been experiencing a Securityrisk.downldr and would like to know how to solve it? I've been trying with NAV and superantispyware, but not successful. Below is my Hijackthis scan log. Pls help urgently! thanks ya!

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:58:19 AM, on 26/3/2008
Platform: Windows Vista (WinNT 6.00.1904)
MSIE: Internet Explorer v7.00 (7.00.6000.16609)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Program Files\Bioscrypt\VeriSoft\Bin\AsGHost.exe
C:\Windows\system32\taskeng.exe
C:\Windows\Explorer.EXE
C:\ProgramData\ybspqjyt\qhcxohul.exe
C:\Program Files\Apoint2K\Apoint.exe
C:\Windows\System32\rundll32.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exe
C:\Program Files\HP\QuickPlay\QPService.exe
C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe
C:\Program Files\Hewlett-Packard\HP Health Check\HPHC_Scheduler.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\WiFiMsg.exe
C:\Program Files\Java\jre1.6.0_05\bin\jusched.exe
C:\Program Files\Google\Gmail Notifier\gnotify.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\HP\HP Software Update\hpwuSchd2.exe
C:\Program Files\Adobe\Reader 8.0\Reader\reader_sl.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Windows\ehome\ehtray.exe
C:\Program Files\Windows Media Play... Read more

Answer:How to solve a Securityrisk.downldr error?

Please do this:

Download Deckard's System Scanner (DSS) to your Desktop. Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - main.txt <- this one will be maximized and extra.txt <-this one will be minimized
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt here.
Please attach extra.txt to your post.
To attach a file to a new post, simplyClick the[Manage Attachments] button under Additional Options > Attach Files on the post composition page, and
copy and paste the following into the "Upload File from your Computer" box:C:\Deckard\System Scanner\extra.txt

Click Upload.

What DSS will do: create a new System Restore point in Windows XP and Vista.
clean your Temporary Files, Downloaded Program Files, and Internet Cache Files, and also empty the Recycle Bin on all drives.
check some important areas of your system and produce a report for your analyst to review. DSS automatically runs HijackThis for you, but it will also install and place a shortcut to HijackThis on your desktop if you do not already have HijackThis installed.

---------------------------------------------------------------------------------------------

1 more replies
Relevance 45.1%

during installation of xp, a error with blue screen occured

Answer:how to solve blue screen error in xp during f

Yes well what was the error code & message ?

2 more replies
Relevance 45.1%

When i try to login on my gmail i get an error msg as: cannot find 'file://c:/users/user/documents/my google.html' and the when i press enter twice i am able to login .Can anyone tell me the reason and solution or the same!

Answer:how to solve gmail login error

Ask the experts here: http://mail.google.com/support/

4 more replies
Relevance 45.1%

Hey guys,

like 6 hours ago ....I recently got this message :

This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.

this came up when I was trying to go into any folder on my desktop .....my documents......and any other folders I have. I can go into My Computer but when I can there I cant get into my documents or my C Drive where I have alot of important stuff which I really need to get into asap.


I was searching through forums on google ......for this type of situation....I found alot of people with the same problem..,....the one I heard that would work is using FixPolicies.exe........but the problem is when I use that I can install it and everything ....but I cant seem to open the folder .....and that Restriction message comes up again when I try to open the folder ....soooo I really dont know what to do......I must figure a way to get into my documents...

Im running on Windows XP ...and yes I am the system adminstator as well...I have scanned my computer ....I had 5 trojans detected.....they have been removed.......

Any HELP!!! would be Great..ASAP ...... ..im in a total jam right now.. ..I hope I dont lose any of the files im my documents.

Answer:Impossible Restriction Error - Need Help How to Solve

Hi studyhard4life and welcome to TSF !

Your restriction issues are probably caused by the trojans or by the fact that you removed them. An antivirus will detect and quarantine infected files but it won't revert the changes those files made to your system. A malware infection rarely comes alone so there are probably remnants or other malwares on your system.

Please follow these 5 steps and read the instructions carefully :
http://www.techsupportforum.com/secu...oval-help.html
Post and attach your final logs in a new thread in the HJT section. Be patient as that section is very busy, the security analysts will get back to you with specific instructions as soon as they'll have reviewed your logs.

1 more replies
Relevance 45.1%

hi..
I installed first time the simulator and open it first time and i got following error.

Problem signature:
Problem Event Name: APPCRASH
Application Name: cpnmld.exe
Application Version: 0.0.0.0
Application Timestamp: 3ffe766e
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7600.16385
Fault Module Timestamp: 4a5bdadb
Exception Code: c0000005
Exception Offset: 00057a79
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: baac
Additional Information 2: baac5f0a4a5b74a99058c19ace5d60ae
Additional Information 3: f5d7
Additional Information 4: f5d7d7ee9503e472a0cc9d8559dae5dc


please provide the solution so i can move ahead in my work..

Waiting for the answers.

Thanks in advance...

Answer:How to solve application crash error?

hello...
i found this article.
Install CPN Tools
and Use cardinfo for Windows
and i don't know this program is compatible with win7 or not. because i don't use it.
hope can help.

2 more replies
Relevance 45.1%

how to solve Bluetooth error on windows 10 ?
 

More replies
Relevance 45.1%

Hi!
I've seen a few people with this issue around but yet to find a fix, getting the error : Internalerror:extracttemporyfile: the file 7z.dll was not found! I've tried reinstalling 7zip, pasting the 7z.dll to various places etc but no fix found! Any advice? anyone else had this?
Thanks!

Answer:Trying to install games, 7z.dll error, can't solve

Try PeaZip

1 more replies
Relevance 45.1%

its cloud Linux hosting ,in
 

More replies
Relevance 45.1%

Note I just installed a few firewire card. However, it doesn't seem to matter if I have it in or not.

STOP: 0x0C5 (0x0, 0x02, 0x01, 0x8053465A)
 

Answer:Help me solve this blue screen error

11 more replies
Relevance 45.1%

C:\program files\TruekKey\McAfee.Truekey.cp.core.localization.dll? What is this error? How to solve?

More replies
Relevance 45.1%

I got this laptop for Christmas and it worked fine. Then i ran a Virus Scan (McAfee, It came with it), Then I shutdown the computer and went to sleep. When I got up I turned it back on and it started up, then it loaded the login screen and says "Incorrect Password" and whatnot. So I clicked OK and tried to login with my password and it doesn't work. I tried several other passwords and no password, But nothing worked. I Also tried Safemode, But it does the same thing. I tried Ophcrack, It just says there is no password.

Please, Someone help me solve this problem without having to lose any data.

Answer:Please help solve! Windows 7 Login Error.

Welcome to Seven Forums

Offline NT Password & Registry Editor

Download the bootdisk on that page from another computer and burn it to a disk.Use the likes of image burn-poweriso or Nero,burn as an image file,not data.
Run it from your computer (make sure boot from cd is allowed from within your BIOS)
Follow the instructions on the website given above and on the disc.

Dan

9 more replies
Relevance 45.1%

E sonic phoenix award bios can't do detected USB removal disk the first problem that is fromMotherboard so can i update bios for that errors ?

More replies
Relevance 45.1%

I read about connection 45 & 47 pins to resolve "ide #1 error" and my question...
how change c-sel/slave mode in diffrent way (without connecting pins)?
I just bought liteon dvd-rw drive (sosw-833s 51c) and install into satellite 1410-304 and my laptop don't work with this drive (at startup "ide #1 error", os don't see drive)

Answer:Satellite 1410-304: How to solve IDE #1 error?

I think, there is no other option (i would also not recommend to change the pin assignment).
You should have asked your Servicepartner what drive's are supported on the type of Notebook, he know's about it ..... I'm sorry to say, but you should have a look before you bought the drive.

Br, Ben

5 more replies
Relevance 44.69%

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

Answer:HELP need to solve this problem asap - Unable to start event viewer/event log service

Fire up regedit and find this key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog

With "Eventlog" highlighted on the left pane, you should be able to see a value called "ImagePath" on the right. ImagePath should be equal to this:

%SystemRoot%\System32\svchost.exe -k LocalServiceNetworkRestricted

If you can't see "ImagePath" in that location, or if it's not set to the text above, that's almost certainly your problem. If you're in the habit of using "registry cleaners", that might be the cause.

3 more replies
Relevance 44.69%

I have trouble playing BURNOUT PARADISE game in my windows 8.

I will tell the problem by posting the images. so some one can help me easily.

First I have opened the game. And the game play has been started [ i mean the starting portion ; not the game]
1.

2.

But Suddenly this has caused the game to stop
3.

So Somebody please help me to solve the problem

Sorry for the bad English

Answer:Help to solve BURNOUT PARADISE error in WIN8 ?

Read this.... Burnout Paradise - Fix Those Pesky Crashes! - Steam Users' Forums

1 more replies
Relevance 44.69%

Your PC need to restart.
Error Code: 0x0000005D
Parameters:
0x00000000BFEBFBFF
0x0000000020100800
0x0000000000000001
0x0000000000000001

Answer:Windows 10 Tech Preview Error How to solve?

Duplicate thread. Continue advice here to keep things tidy... http://forums.windowscentral.com/ask...dows-10-a.html
Thank you.

2 more replies
Relevance 44.69%

windows 7 and chrome gives me a waiting for cache error that makes surfing sluggish. Has anyone solved this problem?

Answer:how do I solve a waiting for cache error in chrome

This might help:http://www.electrictoolbox.com/empt...and this previous thread here:http://www.computing.net/answers/wi...Also it might help to increase the disk space allocated to temporary internet files (TIFs).

2 more replies
Relevance 44.69%

How to resolve error code W1BF3CJKC-GRMEJ1. with my Desktop PC Think center.

More replies
Relevance 44.69%

Hp Pavilion Dv7 Notebook Pc, With OS! Windows 7 home premium 64bit.Error message:-  Hard Disk 1 (301) - it sound like there could be a malwareVirus on it. Got AVG Internet Security 2012 on the notebook. I don't knowThe guys at the Shop where I bought it said I must not update the notebook'ssoftware & drivers to much.











Solved!
View Solution.

Answer:How do I solve a "Hard disk 1 (301)" error on my HP Pavilion...

Hard Disk 1 (301) is a hard drive failure. It means that the hard drive needs to be replaced.You'll need to get a new hard drive and install it, then you'll need to reinstall the Windows operating system using the HP Recovery Media. If you're in warranty, HP will send you the parts per your warranty terms.If you're out of warranty, you'll need to purchase a replacement hard drive and then call HP to order the HP Recovery Media for your specific notebook.The number for US support is 1-800-474-6836.I will be glad to answer any additional questions or provide more details if you'd like to replace it yourself. It's not too difficult.

4 more replies
Relevance 44.69%

I purchased an off lease pc that came with W7. It tooks days but I downloaded all required windows updates to get it up to date. I checked to ensure it was W7 Service Pack 1 so it would be ready for the W10 update (it was). I waited and finally the Get Windows 10 app appeared. I reserved a copy. It said my pc was ready for w10 upgrade and to schedule a date. I waited but finally scheduled a date for the W10 upgrade. The upgrade took a long time. I checked to see if my pc was activated and it was not. It had placed a new code in the key. I tried to put my w& code in there. No matter what I do it gives me error code OxC004C003. This code does not make sense or I would not have been able to download w7 updates and it would not have said my computer was ready. Please tell me how to solve this issue.

Answer:I installed W10 Pro from my W7 pc but it gives me activation error OxC004C003. How can I solve this?

You tried to put a key in the computer after Windows 10 was installed? I would like to point out (on the offset that you didn't know) that Windows 10 keys are completely different from previous Windows operating systems. If you had a genuine, non-pirated copy of Windows 7, then a new Windows 10 key would have automatically been generated for you, and your computer activated.
Now I can't remember 100%, but I believe there were some issues regarding activation. Computers said they weren't activated, but really they are. Please wait for a second opinion on this, as I, again, am not 100% certain.
To put it shortly, your computer is activated and you do not need to put a key in as one was generated for you. I believe.

2 more replies
Relevance 44.69%

installation process stop automatically at 98% and an error comes that3132r5c4.sys is not found. please help ho to install the operating system

Answer:solve 3132r5c4.sys error while install operat

Are you using an actual Microsoft XP disc or some sort of copy?

2 more replies
Relevance 44.69%

Hi

I have had a problem with boot error tos0002 after Ghosting image to a new drive.
I have resolved it by copying the BOOTSECT.BAK from the Vista disc to the C: drive.

I just copied and kept the old one as you can with Vista but I guess it may be similar with XP.
I reinstalled the Qosmio player from the respective disc.

I hope this helps someone because I have spent ages trying to find a fix.

Answer:SOLUTION - How to solve the TOS0002 error issue

Thanks for this information Emma.

It?s always nice to see people who post useful solution proposals?

Greets

3 more replies
Relevance 44.69%

Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-BJD6C-K3YVH-DVQJG
Windows Product Key Hash: WFqPPaNJ0hrc3E/8MgITJa2Xf0M=
Windows Product ID: 00359-OEM-8992687-00118
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {2BCC8FD5-B365-4957-A754-C2D30410368F}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.120503-2030
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 103 Blocked VLK
Microsoft Office Enterprise 2007 - 103 Blocked VLK
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1... Read more

Answer:0xC004E003 error code ..how to solve the problem? =(

Hello acotazchot and welcome to Seven Forums.

Error Code 0xC004E003 usually occurs when product activation fails. If you were trying to activate your copy of Windows 7 you may want to try telephone support.

1. Click Start, and in the Search box type : slui.exe 4
2. Press ENTER on your Keyboard
3. Select your Country.
4. Select the Phone Activation option, and hold on for a real person.

error code: 0xC004E003 - Microsoft Community

EDIT: Please follow the diagnostic information provided by NoelDP in Post # 3.

2 more replies
Relevance 44.69%

I tried syncing my account.It doesn't work.I forgot my password and was suggested to take up a questionnaire but couldn't answer those questions too. I created a new a new email.But I'm not able to create a new account.I want to reset my phone but don't know how to. Will my contacts be deleted if i reset my phone ?

Answer:How to solve error 80048264 ? How to reset phone ?

Yes, if you reset your phone you will lose everything.

4 more replies
Relevance 44.69%

I am trying to sign into my Microsoft account and it says try again later and the error code 0x80048264. I have tried a lot and it never signs me in. How do I solve the error code 0x80048264?

More replies
Relevance 44.69%

wen i md doing cop n paste at that time integrity violated error are comin, now how can solve this problem

Answer:how to solve file integrity violated error

This error is due to a problem in the VT52.SYS device driver, which has no overflow checking for its buffer.Turning off the Allow Fast Paste option in the PIF file may help to correct the problem.

2 more replies
Relevance 44.69%

Hello,
thousands upon thousands of gamers running WinXP and CS are recieving two errors which cause disruption to the game.
the first being the NET_SendPacket ERROR:WSAEINTR error. This error simply cuts the player out of the server they were in and back to the desktop. However the internet connection still exists. The second error (which I find usually occurs if I restart Counter-Strike to play again) completely cuts the player off the internet, with a message stating: net_sendpacket error: no error.
These errors occur after playing online for anywhere between 10 to 30 minutes of play and are extemely annoying. I have read numerous fixes for this problem, but none of them have seemed to help solve everyones problem. Here is what I have tried:
1) the suggestions from http://cs.helpandsupport.net/?aid=37
2) just about every suggestion from http://www.forumplanet.com/counterstrike/topic.asp?fid=4961&tid=718924&p=1, these include changing the amount of RAM CS uses, changing the default port settings, uninstalling QOS Packet Scheduling...
3) the suggestions listed here http://cs.helpandsupport.net/?aid=40 (changing RAM settings)
4) My own experiments with my modem settings. These include:
Hardware Flow Control
Modem Error Control
Modem Compression
IP Header Compression
Use Default Gateway
Enable Software Compression
I found that turning off IP Header Compression fixed the problem for me in the past. But since reinstalling WinXP the other day (and putting my settings bac... Read more

Answer:Enlisting your help to solve the big Counter-Strike Error

16 more replies
Relevance 44.69%

i've tried to play a game(metro 2033) but physxloader.dll error keeps me from going any furtherand its done this with 3 of the games i've tried to install,i'm at a lost to fix this issue.                                  any suggestions?

Answer:physxloader.dll is in error ;adding this my solve your problem

What is the error? Does it say that the dll can't be found?You can do a full search on your machine for the DLL and once you find it, if you have it, then register it to your system.If you don't have it you can try to download it.http://www.dll-files.com/dffsetup_physxloader.exe

1 more replies
Relevance 44.69%

Hello,
I have a laptop (lenovo) with windows 8.1. I have blue screen error problem that occusr frequently while using my laptop and every time  errors are different. Some of them are - Kernel trap , memory management, IRQL_NOT_LESS_OR_EQUAL,  system service
exception etc. Please tell me what's wrong with it and how can i solve these errors?

Thanks

More replies
Relevance 44.69%

When i am downloading the McAfee Manager subscription and it suddenly stops in the middle of the process and showing Error 7305. Is there any way how to Fix McAfee Antivirus Error 7305. I tried for a few http://www.mcafeetechsupportnumber.... persons online.

More replies