Computer Support Forum

Winmgmt Event 4 :- "failed To Load Mof ... While Recov"; 51 new wbem\*MOF files

Question: Winmgmt Event 4 :- "failed To Load Mof ... While Recov"; 51 new wbem\*MOF files

This only happened once immediately after reboot following removal of Comodo Firewall 3.5.This event has never repeated after many reboots.I have not seen any subsequent errors of any sort.Does the absence of repetition indicate that Windows succeeded on the next reboot,or that Windows has given up trying to mend a fatal wound ? ? ?There were 4 off such error events within 1 second, designating these *.MOF filesC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V1.1.4322\ASPNET.MOFC:\AC30D119A40F2C8C8708A20576\I386\LICWMI.MOFC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V3.0\WINDOWSCOMMUNICATIONFOUNDATION\SERVICEMODEL.MOFC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V2.0.50727\ASPNET.MOFI later found that starting a few seconds before that, and finishing a few seconds after,there were 51 *.MOF updated time stamps in C:\WINDOWS\System32\wbem\AutoRecover.Comparing Acronis images of C:\ taken before and after removal/replacement of the Firewall I see :-4 original *.MOF files that retained timestamps of last year and before7 original *.MOF files that were halved in size as they were modified44 brand new *.MOF files I have not seen before.Do all these extra *.MOF files in ...\wbem\AutoRecover indicate a major disaster ?Does the absence of further WinMgmt event 4 errors show recovery without failure on the next reboot ?Does the continued presence of all these *.MOF files show that after recovery Windows was too lazy to delete redundant files ?Or has it left it all for me to try and recompile or something ?I am hoping to be assured that all is well,or to have a quick fix that is sure to work,otherwise I could play safe and restore the system via Acronis image with the old Firewall,and then try to be more gentle as I replace the Firewall,and then repeat all the other updates and adjustment done in the last 7 weeks.I do not want to repeat the last 7 weeks, but I would rather do that than wait until I discover what is badly broken,and then have to repeat everything I might be doing next year ! !I am using XP Home with SP3RegardsAlan

Relevance 100%
Preferred Solution: Winmgmt Event 4 :- "failed To Load Mof ... While Recov"; 51 new wbem\*MOF files

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Winmgmt Event 4 :- "failed To Load Mof ... While Recov"; 51 new wbem\*MOF files

bump

1 more replies
Relevance 93.09%

I removed Comodo 3.5 Firewall and completed removal by rebooting the P.C.
I then checked the event logs to confirm all was well.
I found in the Application Event log that about 1 minute after that latest reboot and login there were 4 errors.

All 4 errors were
Event Type: Error
Event Source: WinMgmt
Event Category: None
Event ID: 4
"Failed to load MOF" {specific file} "while recovering repository file."

The specific files were
C:\AC30D119A40F2C8C8708A20576\I386\LICWMI.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V1.1.4322\ASPNET.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V2.0.50727\ASPNET.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V3.0\WINDOWS COMMUNICATION FOUNDATION\SERVICEMODEL.MOF

Incidentally both the ASPNET.MOF files had a last access date from last year,
so I seems to me that the "Failed to load MOF" was because the was no attempt to read them.
Also .NET v3.0 was purged last year, so the fourth item no longer exists ! ! !

I never knew till then that there had ever been any need to "recover repository files".
There were no further errors when I rebooted 4 times in succession,
so I assumed it was a "one time" failure to recover, and upon the second reboot a full recovery was achieved.
Did I do Good ? ? ?

I then installed Comodo 3.10 Firewall, and the next application event was
Successful auto update retrieval of third-party root list sequence number from:
<http://www.download.windowsupdate.com/msdown... Read more

More replies
Relevance 80.04%

I am trying to get rid of event viewer errors and warnings at bootup. This one still eludes me. It appears to be a driver error related to my Epson RX680 printer. Can someone give me a few tips on how to narrow it down further?

"The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_EPSON&PROD_STYLUS_STORAGE&REV_1.0 0#9&2856B3B7&0&070E018870865F0000&0#"





TIA

Answer:Event 219 "WUDFRd failed to load " warning at bootup

What have you already tried to fix the issue? Have you tried looking for an updated driver from epsons website?

3 more replies
Relevance 77.43%

This only happened once immediately after reboot following removal of Comodo Firewall 3.5.
This event has never repeated after many reboots.
I have not seen any subsequent errors of any sort.

Does the absence of repetition indicate that Windows suceeded on the next reboot,
or that Windows has given up trying to mend a fatal wound ? ? ?

There were 4 off such error events within 1 second, designating these *.MOF files
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V1.1.4322\ASPNET.MOF
C:\AC30D119A40F2C8C8708A20576\I386\LICWMI.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V3.0\WINDOWS COMMUNICATIONFOUNDATION\SERVICEMODEL.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V2.0.50727\ASPNET.MOF

I later found that starting a few seconds before that, and finishing a few seconds after,
there were 51 *.MOF updated time stamps in C:\WINDOWS\System32\wbem\AutoRecover.
Comparing Acronis images of C:\ taken before and after removal/replacement of the Firewall I see :-
4 original *.MOF files that retained timestamps of last year and before
7 original *.MOF files that were halved in size as they were modified
44 brand new *.MOF files I have not seen before.

Do all these extra *.MOF files in ...\wbem\AutoRecover indicate a major disaster ?
Does the absence of further WinMgmt event 4 errors show recovery without failure on the next reboot ?
Does the continued presence of all these *.MOF file... Read more

Answer:SINGLE WinMgmt event 4 :- "Failed to load MOF ... while recovering repository file."

First, some data on .mof files, http://technet.microsoft.com/en-us/library/cc180827.aspx AND http://filext.com/file-extension/MOF.Now that you made me check this system ...I have 121 files with the .mof extension. About 70% of them seem to be in C:\Windows\System32\wbem\AutoRecover, 25% in C:\Windows\System32\wbem..a few in service pack folders, MS.NET, etc.From what I see, it's too technical for me to worry about. If it was something to worry about, I suppose that Event Viewer would give me an error message about it or I would get a BSOD, etc.I don't spend a lot of time worrying about WMI processes...they don't exist for me, they exist for XP (at least, that's my interpretation).Louis

2 more replies
Relevance 96.35%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

Answer:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Relevance 95.12%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

Answer:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Relevance 94.71%

Windows Update Won't Load--gets error-"This page failed to load". My system=32 bit operating system which is Vista Ultimate.

Answer:Windows Update Won't Load--gets error-"This page failed to load"

Hello sgibbins,
Try here, people have had some good results doing this. please post your results. Good luck.


JSI Tip 2805. Windows Update 'Cannot Display Page'?

7 more replies
Relevance 94.3%

My computer recently started having issues........ here is what is going on:
* boot computer
* Windows boot screen displayed ~ 1 minute
* screen goes black. Can move mouse. Drive light constantly on, not blinking. ~ 5 minutes
* log in screen comes up / log in
* Desktop loads ~ 1 minute
> sometimes it loads with regular windows aero theme other times it loads with basic windows classic theme.
* Error message pop up "failed to connect to System event notification service"
* Have to wait for about 5 more minutes before computer is actually usable
* The audio service does not work as well...
from when I press the power button to when I can actually use my computer takes 10 - 15 minutes.

Here is what I have tried so far
*Turning off all start up programs / services
*Tested Memory - passed
*Hard Drive Self Test ---- # 1 - 7 fail / I am guessing that this is the source of the problem, however my computer does still work once everything is finally booted. So I don't know what to do with that information or if that test even matters.
* I have tried looking at the event viewer but every time it says that the event log service is unavailable.
> I try turning on Windows Event Log but that does not change anything
* tried "netsh winsock reset" in command prompt, based on a different thread that I found - it didn't work


64bit Windows 7 untimate, clean install from usb iso (post resolution to bootsect.exe issue), running on dell poweredge sc430,
&... Read more

Answer:Windows failed to conect to " system event notification service"

This seems to be a common problem, I am now also experiencing the same.
I have Win 7 Home Premium 64. Did chkdsk /r, defragged, tried sfc/scannow scanned for viruses and even tried reseting winsock.
My aero themes are greyed out, when trying to fix it with MS fixit it errors out.
It takes a long time to boot and then says "failed to connect to System event notification service"

One search on google will show this is a major problem, so why does MS not come out with a fix.
This seems to be the biggest frustration with Win 7 compared to XP, lack of support from MS.

2 more replies
Relevance 94.3%

Log Name: System
Source: volmgr
Date: 12/4/2007 2:48:06 PM
Event ID: 46
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Home
Description:
Crash dump initialization failed!
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="volmgr" />
<EventID Qualifiers="49156">46</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2007-12-04T19:48:06.937Z" />
<EventRecordID>21840</EventRecordID>
<Channel>System</Channel>
<Computer>Home</Computer>
<Security />
</System>
<EventData>
<Data>\Device\HarddiskVolume1</Data>

<Binary>0000000001000000000000002E0004C001100000010000C000000000000000000000000000000000</Binary>
</EventData>
</Event>

Answer:Plese Help "Event ID 46 Crash Dump Initialization failed!"

*up*

I get this very same error every time I boot (startup, not shutdown). It appears twice in the system log ("Crash dump initialization failed!" by volmgr with event id 46). I have absolutely no issues with my Vista but I'd like to get rid of this error nevertheless. So far I've been unable to track the source of the problem.

I have SP1 and the latest updates installed.

3 more replies
Relevance 93.48%

failed to load locale files from "Program Files\Western Digital\WD Smartware\Locale"

The menu box it's under is entitled " WDContextMenuHandler "

I get this error when I just right click on any part of "my computer" everytime.

the pc then goes blank on desktop while it says " windows explorer shutting down " and then pc comes back. I tried to uninstall WD smartware but it won't allow me to. When I installed it the first time, all the menus were not available, so I uninstalled it, so I thought, and reinstalled it. Now there are 2 WD Smartwares shown in my programs and I can only get rid of the newest one. I also tried a system restore, but the date before the first install is not available.

any help.

Answer:error-failed to load locale files from "Program Files\Western Digital\

Use Fix problems with programs that can't be installed or uninstalled and see if you can uninstall it cleanly. If you are unable to uninstall the phantom version still lurking, you may have to re-install and then use the Fix It to uninstall properly.

How do I remove a product that cannot be uninstalled in the "Add or Remove Programs" list. may also be good reading.

1 more replies
Relevance 93.07%

Hi, have just tried to do a clean install of windows 7 64 bit on my new PC. I have been into the bios to make sure it is set to boot from DVD, all good. I then insert the windows dvd, drawer closes, disk spins, I get to the "windows transfering files" bar at the bottom of the screen, all good. Then the "Starting windows" message appears (without the colourful swirl in the background, just words) and thats it!!! It seems to lock on that screen? My motherboard has a LED code AE - Legacy Boot Event? What does this mean and is this stopping windows from booting? Please any help is much appreciated!. System specs- i7-2700k, maximus iv gene-z, g-skill 16gb, ocz 120gb, seagate barra 2tb, gtx 570, kuhler 920, ocz 750w, pioneer opt. antec df-85.

Answer:"Legacy boot event" what does this mean? Windows 7 wont load?

Boot into Setup (Bios) What is the HDD mode set to? Is set to IDE or AHCI? Also set the Bios to Default. Also check again in Boot Priority again to make sure CD/DVD rom drive is First Boot Device.You may need to do a Bios Update.

15 more replies
Relevance 93.07%

I recently came across a "corrupted" laptop (love how people call things to do with computers corrupted when they can't figure out how to fix it) to fix, it's a Dell Latitude D630 with windows xp home installed.

When i got it, booting up to windows would result in blue screen error after windows xp loading screen 100% of the time in normal mode, and would hang on mup.sys in safe mode (left it booting into safemode for about 6-7hours while i slept at mup.sys and never loaded past it). I decided to do a repair install, got through it all perfectly fine, entered the product key from the sticker on the bottom, worked fine. Booted up again, got past the xp screen to login screen and got the message "this copy of windows must be activated with microsoft before you can log on" can choose "Ok" or "Close" i believe, basically yes or no.. reguardless of what i click, it loads into windows to the desktop, and does not load anything else. ctrl+alt+del doesn't bring up taskmanager. in safemode everything works how it should, msconfig running processes are all normal, nothing out of the ordinary, as well as in services, closed everything except critical processes/services, made a new user as well and logged into that account, get the same activation message and loads to desktop with no icons and still no ctrl+alt+del/start menu/icons/any keyboard shortcut, however windows security center popped up on new account saying there was no anti-virus (woo... Read more

Answer:[SOLVED] Desktop won't load on dell laptop after &quot;windows must be activated&quot; event

should also include that after repair install loading back into windows after 3rd reboot when it's finished it would get to the windows xp loading screen and hang there without ever loading windows, but once i shutdown and turned it back on it would load fine. (fine meaning it would get to the login screen and just not work anymore)

1 more replies
Relevance 92.66%

Many people have posted about Event 2 - Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035.  I have not seen any posts where someone from Microsoft explained why this event occurs, why it occurs
in groups of 20 in about 10 seconds, how to prevent it, or whether it is something to be lived with.
Can anyone, especially someone from the NTdebugging team, a/k/a Global Escalation Services (GES), address this?
Thanks.

More replies
Relevance 90.2%

Hi,
I am getting the error, "Symantec AntiVirus Auto-Protect failed to load.". Not sure what happened the reason for this. I see the Symantec Icon circled with red-cross in Systray. Looks like my Laptop is unsafe.

Please help.

Thanks,
Sid
 

Answer:Getting the Error - " Symantec AntiVirus Auto-Protect failed to load."

I would recommend uninstalling/reinstalling the Symantec software.Do you have the CD or was it preinstalled on the system?
 

1 more replies
Relevance 90.2%

Hi

When I right click My Computer on Vista Start menu the page says "The page failed to load"

I enclose a screenshot of the error.

I was also get "the application has failed to start because WINBRAND.dll was not found" when running

SystemPropertiesAdvanced

From RUN

This has now been fixed by downloading WINBRAND.dll and copying it to c:\windows\system32

But "The page failed to load" still happens when right clicking My Computer and choosing properties.

I did a SFC / Scannow and something weird happened. The Command Window had an error (apologies - forgot to note which but will rerun in a moment) however the CBS Log File showed no errors and indicated SFC ran successfully.

I will post the results of SFC in a few moments

Thanks for your help.

*************************************************
 

Answer:Solved: "The page failed to load" Control Panel > System

11 more replies
Relevance 90.2%

I'll be referring to the image above. The second image that has to do with Outlook Express directly was caused directly after merging some partitions and then changing drive letters. I was using Partition Magic so Drive Mapper supposedly changed all references in the registry. I checked with Microsoft's solution to the problem, but it was of no help (http://support.microsoft.com/kb/191946). I would like to just completely remove Outlook Express if I could. As I was following the instructions, I deleted the registry keys I was supposed to which I think led to the first error message you see. I'm not completely sure though, it could have also been because I applied the Windows Vista Transformation Pack.

Answer:"Address Book failed to load" + Invalid root

*bump* Also, I should say that before the Outlook message used to pop up constantly (every 20 seconds or so) and I've gotten it to only pop up at startup by removing those registry entries.

2 more replies
Relevance 90.2%

Legitimate copy of Win Vista Ultimate SP1, all updates through last week ...

When I attempt to open Windows Update, I get an error message "The page
failed to load".

A google search found nothing but the suggestion to delete "System32", am I'm not going there!
 

Answer:Solved: Windows Update "The page failed to load"

10 more replies
Relevance 90.2%

Hi Guy
I'm using win 98 and cannot get my Viavoice working.
I keep getting "FAILED TO LOAD LOCAL LANGUAGE MODULE".
This has been an ongoing problem for some time, and was part of a software package from "Time". I've also installed IBM software as a separate voice programme but can't get this to run satifactorily. Time Help is no help, perhaps you can help? Much appreciated in anticipation. Many thanks.

Dicksee

PS Have spent loads of money with "Time"without satisfaction.
 

Answer:Viavoice "FAILED TO LOAD LOCAL LANGUAGE MODULE"

Dicksee
Welcome to TSG!

Not sure if I can help but will try......
It sounds as if you have an incomplete or corrupt installation.
When this happens to any software program the best solution is to uninstall and reinstall the package.
1) Go to start\settings\control panel\add-remove programs and locate the via-voice line listing. Highlight it by left clicking and select remove.
2) If there are other entries referring to voice software remove them to.
3) Restart system into safe mode. During restart keep tapping the F8 key until a selection screen appears and arrow to select "Safe Mode" then hit enter.
4) Once in safe mode go to start\find-search\files and folders and type in *.cpl then hit enter
5) A listing of all control panel applets will appear in right pane.
6) Locate SETNOTE.CPL
7) Right click that applet and select delete.
8) Restart system into normal mode and reinstall the via-voice package.
Note: Make sure you anti-virus software is disabled before and during install.

Hope that helps.....

Dave
 

1 more replies
Relevance 90.2%

As of the last week, have been experiencing issues with extreme slowness. Reset Firefox to defaults, did not help. PC slows/freezes, when tried to launch task manager, CTRL-ALT-DEL, get message "Failed to load security options" then screen stays black with only that message. At times never unfreezes. After a hard re-boot, goes straight to recovery mode. I have noticed that there are certain error messages such as failed updates. And also, my security defaults have been "turned off" at least once without my doing......... Yikes! I have done a recovery to previous date, and that has helped, but then it starts all over again.... Certain start up items dont load and then the freeze comes again. And again the "Failed to load security options".....

Here are the logs... I believe i got them all....

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:51:20 AM, on 6/7/2014
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v9.00 (9.00.8112.16545)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskeng.exe
C:\hp\support\hpsysdrv.exe
C:\Program Files\Hewlett-Packard\On-Screen OSD Indicator\OSD.exe
C:\Windows\RtHDVCpl.exe
C:\Program Files\Lexmark X1100 Series\LXBKbmgr.exe
C:\Program Files\Common Files\Symantec Shared\PIF\{B8E1DD85-8582-4c61-B58F-2F227FCA9A08}\PIFSvc.exe
C:\Windows\system32\schtasks.exe
C:\Program Files\Common Files\Pure Networks Shared\Platform\nmctxth.e... Read more

Answer:Very Slow, Often get "Failed to load security options" and freezes

16 more replies
Relevance 90.2%

Hello,
I've been experiencing multiple bluescreens daily and what's odd about them is they occur randomly while using many programs; however, I have noticed that they occur more frequently directly after opening a new tab, loading a new site or running a game (StarCraft II).
Looking through Event Viewer. I see a list of warnings and errors immediately prior to the BSOD. In chronological order:

9:07:18 PM CRITICAL- "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

9:07:28 PM WARNING- "The driver \Driver\WUDFRd failed to load for the device USB\VID_0483&PID_2016\5&249af6f9&0&2."

9:07:42 PM ERROR- "The previous system shutdown at 9:05:49 PM on &#8206;7/&#8206;13/&#8206;2011 was unexpected."

9:07:44 PM ERROR- "The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000099e0000007e, 0x0000000000000002, 0x0000000000000001, 0xfffff80002a92885). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 071311-32869-01."

9:07:47 PM ERROR- "Audit events have been dropped by the transport. 0"

I also get this warning quite often:
"The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 ... Read more

Answer:Multiple BSOD daily "\Driver\WUDFRd failed to load for the device"

10 more replies
Relevance 89.79%

Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space.
========================
Got "Page Failed to Load" error attempting to change my Win7-64bit display resolution.
This used to work, but no more ( don't know what might have caused it)

I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.

Please find that file attached -- Any help will be appreciated.....

thank you,
Chuck

Answer:"Page Failed to Load" error attempting to change my Win7-64bit display

Run the system file check again. Sometimes it requires multiple runs. Reboot after each run (or before the first run if you have not rebooted since the last time you ran the check).Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

2 more replies
Relevance 89.79%

I am getting the error "Failed to load resources from resource file. Please check your Setup" This happens every time I try to access a Word document. I am using Word 2003 from the Small business pkg.

I searched on their site and there was a download for those who use the Outlook business contact manager also, which I do. I downloaded the file, when to install it and it says it is already there.

I am running Windows 2000, this just started today and my updates are up to date.

Any ideas? I can ignore the warning and work, if I click OK or the X, it shuts down Word.

Thanks!
 

Answer:"Failed to load resources....." error in word

Try the Detect and Repair option from the Help menu. You will need to insert your Office disc when asked.
 

1 more replies
Relevance 89.79%

Trying to log into "Bitdefender" antivirus but it tells me I need Javascript which is already in my Chrome Browser. I checked Javascript in the browser and it had this error message "Failed to load resource: net::ERR_CACHE_MISS " What shall I do, uninstall it and reinstall?
 

Answer:Solved: Javascript error msg "failed to load"

Apparently it is a bug in chrome.
Source: http://craftcms.stackexchange.com/questions/5362/failed-to-load-resource-neterr-cache-miss
 

1 more replies
Relevance 89.79%

This error message pops upafter I log on to my Windows Xp laptop. What does it mean and how do I remove it?
 

More replies
Relevance 89.79%

Several days ago there was a large number of updates available to download. I allowed the system to update all of them. Three, KB974234, KB972581 and KB973709 it was shown on the update history page as failing to download.
Reading as to a possible solution, I tried to load them manually, saving those files to my desktop, right clicking on each, to run as an administrator. After each loaded I got a message telling me they were already installed on my system.
My question is why does the "failure" notice remain on my history page and how can I delete those three file entries?
Thanks much,
Lee

Answer:History page notes they "failed" to load

Simplest way to reset WU history is stop for the moment Windows Update service and remove C:\Windows\SoftwareDistibution folder...

4 more replies
Relevance 89.79%

Vista Home Basic SP2. When I try to run Windows update all I get is a blank page that says "The page failed to load". I've looked all around and have found a lot of people with the same or a similar problem but no firm solutions. I haven't used it in maybe a week and it's worked fine up till now. There have been no real changes since I used it last. Does anyone have a clue?

Answer:Windows update "the page failed to load"

Originally Posted by drelectron


Does anyone have a clue?



Many possible explanations -wrong system settings,3p software,viruses...

Try advices from this link:You cannot install some updates or programs
reset IE Internet Explorer - Reset

Uninstall non-system firewall,antivirus,antispyware

Reset WU with "aggressive mode" How do I reset Windows Update components&#63;

Viruses also cancause this.Because scanning on allive system is not credible because many viruses can hide before antivirus I suggest use LiveCD with antivirus for example this one Dr.Web LiveCD is a software product that features a standard, Dr.Web scanner ,burn boot it and scan.
If nothing help find WindowsUpdate.log file in C:\Windows pack it and attache to post.

4 more replies
Relevance 88.97%

Guys,

Please review this issue for me as I need the answer for my references. This sometimes applies to setting up a new Internet Connection in Win 95 or 98. Let's say, that you have set up a new Internet Connection with new ISP path settings. Your asked to do a system restart, you do a restart and all is well until you get to a second screen in the bios that either says:

"Ethernet Adaptor failed to load press any key to retry" OR

"Ethernet driver failed to load press any key to retry"

I can't remember what the message says, but it's one or the other! after the word "Driver" or "Adaptor" it gives the driver name. You CAN however still get into Windows by pressing any key....But, the message will come up until you remove the driver.

I vaguely remember that to remove this message you go under Device Manager, under "Networking" and remove a device that has an exclamation point under it (This removes the network driver that doesn't load) But what does this message mean and how does it happen to get there in the first place? I know that it happens when setting up a new Internet Connection sometimes, but I need to know the exact steps for removing the driver because I might be changing ISP's in the future, and need to know what to do if this message comes up again! Thanks!

Jack
 

Answer:What Does "Ethernet Driver Failed To Load" Mean?

i think the message means that the driver is corrupted/not responding

why it happens, i dont know, but if u are installing a separate software to connect to your isp, this software might be the problem

the proper way of removing the driver is to delete it from device manager
 

1 more replies
Relevance 88.97%

Hey guys

this is a great and detailed tutorial and all worked as explained except to the last step...

I still can't get into my account, what sucks big time.

It looks like the password has been changed as the error message is not the same when I enter a wrong password.

It says some like "failed to load the user Profile" or to "failure to connect to the service to load the User" (it's in another language so I translate the best I can.

When I hit the OK button the login page will reload.

I ain't get the link to reset a new password in that process, that one I get only when I enter a wrong password. Anyhow, I don't have a password reset disc (unfortunately)

QUESTION

Can I use above tutorial and simply REMOVE any kind of password from keeping me out of my W7?

I can get till the last prompt where the tutorial shows to enter a new password, so maybe I can do this to get rid of the password too?

Would be awesoome

Thanks for Any Help whatsoever

Answer:"failed to load the user Profile"

Hello easycash, and welcome to Seven Forums.

For that error, you would want to use the tutorial below instead. Be sure to read all of it for all available options. You might give the system restore at boot option a try first.

User Profile Service failed the logon. User profile cannot be loaded.

Hope this helps,
Shawn

5 more replies
Relevance 88.97%

I installed and uninstalled fruity loops (cause it wasnt working properly) and everything started going to shit. Im using XP Pro.

When i open internet explorer i get a "failed to load resource DLL" error message. When i click ok the program opens normally. This also happens when i right click on objects on my desktop.

I did a couple of virus scans and came up clean but when i tried to run auto update for norton it said i uninstalled it....which i didn't.

It also wouldn't let me play mp3s with windows media player, when i re-installed it it fixed that problem.

Anyone have any ideas what's causing this? Any help would be appreciated.
 

Answer:"failed to load resource DLL" error

Did fruit loops have a uninstaller?
.If so did you uninstall this way,
or did you uninstall through add/remove
 

8 more replies
Relevance 88.97%

Hello, I hope I am posting this in the right thread. I have a Toshiba satellite laptop with windows xp. Recently, at startup I started receiving a message that says" One or more modules failed to load." "This process will be terminated." All of a sudden, most of my programs are not working correctly either. They won't open and each has their own message. For instance, Adobe Photoshop says they a registry file is missing, please reinstall. Another program says something about a runtime error. I can't even open my Norton anti virus software. This is so frustrating, does anyone know what could have happened and how I can fix this problem? My guess would be some sort of virus, but I really have no clue. Please help!! Thanks
 

Answer:message, "One or more modules failed to load"

7 more replies
Relevance 88.97%

Hello people. I have joined this site hoping to get to help with the issues I have after updating from windows 8 to 8.1. I have been pulling my hair out because after loading this update it has screwed up my laptop.

Firstly after my laptop eventually starts I get the following error message

REGSVR32
The module "C:\ProgramData\ljleKtopg.dat" Faile to load
Make sure the binary is stored at the specified path, or debug it to check for problems with the binary oe dependent .DLL files.

The specified module could not be found

The other main problem is

Sometimes when surfing the screen will freeze and sometimes it will start again after about 10 seconds, or it will just stay frozen and I have to switch the laptop off, and then restart it. When I restart it I get the following message on the screen, Configuring windows update, 100% complete, do not turn off your computer. This will stay on the screen for an average of 35 minutes before it goes, and my laptop starts. This happens a couple of times a day and it's doing my head in because it was fine before I had to do the 8.1 update.

Any help would be appreciated.

Answer:"C:\ProgramData\ljleKtopg.dat" Failed to load

As for the dat file; I'll take a wild guess that this might be the residue of a malware that Windows Defender or your virus program cleared up.
The name of the file seems random generated (typical of malware) and the fact that it's in Program Data also smells a bit fishy.
Doesn't seem like a legit name of a file. Perhaps your upgrade cleared out whatever it was.
Check your startup items in the Registry and in Task Manager to see if there is something Windows is trying to start that doesn't seem legit. I am not one to shout "virus" or be dramatic about that, but you might just want to do a scan of your windows directory, Program Files folders and your Users directory.

CCCleanear and HiJackThis tells you if something has been messing with your settings - consider running those for this type of problem.

As for you problems with Windows update - either just hide that update and forget about it, alternatively run sfc /scannow from the command prompt to correct anything funny on your setup that might prvent the update from goingin.

Since these are quite different issues they probably belong in different threads, particularly if it ends up taking a while to get to the bottom of it.

This was the short response - if you are unsure how to do any of what I suggested, please google it, and if it's still not clear, then post back here.

1 more replies
Relevance 88.97%

win 7
new error on reboots
" failed" what is a branding config and how do I get rid of it? please help---I am old and not too bright!!
 

More replies
Relevance 88.97%

I get the above error message whenever I right click on a drive, file or folder. The dll is not specified. Google search came up with two other pleas for help regarding this error, neither of which was apparently resolved.
Upon clicking OK, Windows XP Home lets me perform the task ; move, delete, rename, properties or whatever.

Can anyone help me get rid of this annoyance?
 

Answer:"fAILED TO LOAD RESOURCE DLL" error

whush, first welcome to MG. I had a long reply typed out earlier, but lost it somehow. Trying again. Go to Start--->Run. Type in SFC and then <enter>. You MUST have your Windows Operating system CD loaded for maximum results. SFC (System File Checker) will check out all files required to run Windows and ask for various answers (courses of action from you) to the problems it finds, Read and re-read the courses of action carefully. Answer "ignore" first time round, if you are not sure of the correct answer. Proceed slowly, with a clear head and no sources of interruption. This may clear your problem, but will certainly help in other areas, at least. Bazza

PS I use W98SE, not XP, so there may be slight differences. Baz

===





whush said:



I get the above error message whenever I right click on a drive, file or folder. The dll is not specified. Google search came up with two other pleas for help regarding this error, neither of which was apparently resolved.
Upon clicking OK, Windows XP Home lets me perform the task ; move, delete, rename, properties or whatever.

Can anyone help me get rid of this annoyance?Click to expand...


 

6 more replies
Relevance 88.56%

Three times in the last 24 hours this warning has opened on my Desktop, after I have just closed Windows Live Mail [WLM] . After the warning disappears from the Desktop, WLM opens yet again.

Naturally I've allowed the issue to be reported to MS and sent the information, but I note that there is also a File that describes the event, in this case:

C:\Users\Tony\AppData\Local\Temp\WER21C8.tmp.hdmp

Is there any way that I may attempt to either fix or resolve this issue myself? For starters, I haven't a clue about how I access the quoted File, and if I did, I don't know what to do with it anyway.

Or is this yet another of those situations where you just grin and bear it until MS come up with something to resolve the issue? Hope not 'cos it's mildly annoying...

Answer:"Windows Live Mail has stopped working" - Files describe event; Fix?

1) Ignore error message.
2) Do a "repair" of Windows Live Essentials via Programs and Features
3) Use the Disk Cleanup utility
3) Use sfc /scannow via the command prompt window.

7 more replies
Relevance 88.15%

Hi

After i have removed some spyware/trojans I starting getting this error message when I try to access the eventlog:

event log "unable to complete the operation on" eg. system "the interface is unknown" windows xp.

Also I can add programs to Symantec internet security 2005 firewall, reinstalling don't fix it. Some programs also start to fail, "bad image" or you don't have admin premissions.

Reinstalling SP2 or using system restore for XP don't fix any thing.

I have scanned my computer with 4 antispyware programs, and 4 antivirus programs and check it with hijackthis so my machine should be clean.

Does any one have any Idears?

Answer:event log "unable to complete the operation on" "the interface is unknown" windo

maybe you removes something with hijackthis which your system needs

go to start, run and type "sfc /scannow"
then it will rpompt you for the XP CD, put it in and let it scan your computer for corrupted or missing files

6 more replies
Relevance 87.74%

I have a message coming up titled "Failed to connect to a windows service"
and it reads -



?Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the
System Event Log for details about why the service didn't respond.?





Also, the task bar and menu <g class="gr_ gr_46 gr-alert gr_gramm gr_inline_cards gr_run_anim Grammar multiReplace" data-gr-id="46" id="46">turns</g> into
a classic style of windows randomly when this is happening. This started happening a couple weeks ago to one device regardless of what network it is connected to.



Does anyone have any ideas on how to fix this? We have already reset the NIC on the laptop to force all settings to DHCP to ensure DNS is being set correctly. Updated DHCP settings
to disable NetBIOS as it is deprecated and should not be used over DNS for resolution. And we have run the <g class="gr_ gr_45 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling ins-del multiReplace" data-gr-id="45"
id="45">winsock</g> reset.



How many devices were affected? - Just oneAre you connected to a domain network? - YesWhen did the issue start happening? - The issue started a couple weeks ago and is getting worse

What we have done so far:

- ... Read more

More replies
Relevance 87.33%

When I try to install gears of war I reivieve this error message. "Failed to load DLL: GameuxInstallHelper"

I have tried all the below with no avail...

http://support.microsoft.com/default.aspx?scid=kb;en-us;968365&sd=rss&spid=7027
 

More replies
Relevance 87.33%

Get message "Failed to load 'installhelper.dll' into memory." while trying to install eCopy from a CD that installs fine on other PCs. eCopy has no information about this error message and nothing appears on the net. Any ideas? Have tried searching the PC and other PCs in the network for such file or instances of it in the registry. Nothing!
 

Answer:Failed to load "installhelper.dll"

Just to be sure, what OS are trying to install this software on that fails?
 

2 more replies
Relevance 86.1%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Relevance 86.1%

Hey there...I found a folder that I've never seen in my D partition before...I partition my hdd into 3 parts...C=OS installation...D=Programs and Games...E=Misc downloads and music and pr0n ...

Well I've never had a virus or anything in my D partition before...I just found this folder named "winnt" and it had some bat files and some kind of Airline JScript and something that looks like an airplane tracker...

Then in a folder named sdata (still in the winnt folder) there's files like 911, police, air, fire, etc...OMFG!!! This is like some terrorist thing or something...FBI is gonna find me and I'll never see the light of day again!!! I'll miss the [H] and I haven't even watched LOTR Extended Platinum Collectors DVD thing (the big ass package with those book holder things)...I haven't even completed Doom 3 or started playing HL2 or even had a chance to buy an X-Box and play Halo 2!!!

AHHHHHH!!!!!! WTF is this crap on my computer??? I'm gonna delete this...I should delete it right??? Scans say it isn't a virus but what do they know...I'm screwed...

THANX
C'YA
 

Answer:OMG!!! Found some folder with files like "911" "police" "air" and a airplane tracker!

if youre os is on C: there shouldn't be a winnt dir on d:, should be safe to delete it.
 

7 more replies
Relevance 85.69%

Hope this query is in the right section -tried to use my LDS 1881 England Census CDs last night - but having problems with the Viewer.

I have V4 which up to now has worked perfectly - tried to re-install it
and I keep getting "Failed to extract file "Dll_ini" from binary table"
error message.

BUT no problems on my laptap which has the Viewer installed from the
same CD.

Have had a few problems with computer of late - it was in the workshop
3 weeks ago because of some corrupt Windows files - could that be the
problem?

Grateful for any advice, suggestions as to what to do!
 

More replies
Relevance 85.69%

I'm trying to find the settings called "ModemRingOn" and "PME Wake Up Event" both in bios but i can't find them.

Does anyone know where they are? Like under what options in bios?
 

Answer:Where are "ModemRingOn" and "PME Wake Up Event" located in bios?

They may not be there at all. If the modem is built into the board, maybe.
 

1 more replies
Relevance 85.69%

I'm trying to find the settings called "ModemRingOn" and "PME Wake Up Event" both in bios but i can't find them.

Does anyone know where they are? Like under what options in bios?

Answer:Where are "ModemRingOn" and "PME Wake Up Event" located in bios?

BIOS's vary widely; there is no standard features that are included. It's possible your BIOS has neither of them.

If these are features you are interested in exist, the first thing to do is to check the motherboard manufacturer's web site's "support" page, and find out what the latest version of BIOS is available for your motherboard, compare that to what you actually have on your motherboard, and then read the change log to see if possible these features were added.

You can also research these features by Googling the text "ModemRingOn" and the model number of your motherboard "GA-XYZ123" in the same search, in order to filter hits that are limited to those that include references to both of these qualities. Look for forum posts, and other technical sites & information.

Also, look for the User Manual for your motherboard on-line. Sometimes these include information on the BIOS of the motherboard.

1 more replies
Relevance 85.28%

The title says it partially, but that's not the whole story:

I decided to use OneDrive, and so I sent a folder from my external Toshiba drive to OneDrive. It took forever and three days to finish, and seemingly isn't finished yet.

I now get, File Failed to Upload -- There was an error while uploading a file to the server. Click to view and resolve the error.

Ha! I wish I could do something that simple, but it's not gonna happen! Nothing I do will help to resolve the error.

I've looked into the event log and everything there is all Greek to me; I've seen 1002 (101) Application Hang (among a few gazillion other things), but it doesn't tell me more than that.

I've resigned myself to losing files that haven't made it across, since I have most of them on another external drive, but it seems I can't stop whatever's happening.

Here's the first page of the viewer:

More replies
Relevance 85.28%

I have two issues, which I think are related. In the Device Manager, it shows under USB Controllers "Unknown device". "Windows has stopped this device because it has reported problems. (Code 43)"

I tried updating the driver, but the driver was correct.

I tried disabling the device.

I uninstalled the device. Windows reinstalled it at next boot, but the problem reappeared.

There is no Imaging Devices in the Device Manager.

At the same time, my webcam failed to open. Message "Webcamera initialization failed."

I downloaded the correct webcam program from Toshiba, installed it, but same result.

This all started when I uninstalled and reinstalled Skype. I have tried uninstalling it again, but still no webcam.

The webcam is enabled in the BIOS.

I really do not want to reinstall Windows.

All help appreciated.

Toshiba Satellite P500 16J
Windows 7 Ultimate x86
All updates installed

More replies
Relevance 85.28%

I just resolved an issue I had with the wireless connectivity of my Acer notebook computer and now I am getting strange error messages. When I try (not every instance) to open device manager I will get the message "Failed to open empty document." From there I will occasionally get "Parser" messages that say "Value creation failed at line 843" or "line 422." I read what I could find about these messages and it points to MMC as the cause. How do I go about fixing this annoying problem if anyone knows?
 

More replies
Relevance 85.28%

deaes ir tech guy,

I have a recurring problem with SOTHINK DVD maker. After it downloads all the video files I want to burn it gives me an error display of"failed to encode files". I've been using SOTHINK for years and I don't know why this error occurs. I'M running Windows 7 on my laptop and the video files I'm trying to burn to DVD are from YOUTUBE. I usually don't have any download problems with YOUTUBE. Please help me with this issue. Thanks.

Samlin
 

More replies
Relevance 85.28%

Hello!
Lately whenever I try to download any file from anywhere I get the following "Microsoft Visual C++ Runtime Library" error:

Assertion Failed!

Program: C:\Windows\SysWOW64\verclsid.ex
File: D:\rtm\ds\securityproducts\antim...\dynami...ues.cpp
Line: 979

Expression: false

For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts

(Press Retry to debug the application - JIT must be enabled)
The thought just occurred to me that there might be conflicting mozilla settings, since I'm using a hard drive (d that previously had mozilla on it, but I didn't remove the data.

I'll try and erase that old stuff, but in the meantime, if anyone has ideas or suggestions, I'd love to hear them.

Thank you!

Answer:Firefox 3.0 "Assertion Failed" when trying to download files

I deleted everything (mozilla related) off that hard drive (d and that didn't solve the problem.

14 more replies
Relevance 84.46%

Hello
I am new to Microsoft Message Analyzer and just downloaded version 1.4 and installed on my Windows 10 laptop
I saved my Windows System Event log as an .evtx file to have some data to start looking at. I note the column entitled 'summary' appears to show the body of the event message. However I see many rows which state "unable to retrieve the event description"
in this column, what do I need to do to fix this issues please? could it of been the way that I saved the .evtx file in the first instance (I accepted the defaults) or do I need to install some additional files/components so the messages are displayed
correctly?

Thanks all
Ernest

More replies
Relevance 84.46%

Event Log Explorer
A tool to help Manage, Analyze and Report Windows Event Logs
For Windows NT/2000/XP/2003 operating systems​
This is a simple, "starter" guide to help use this tool. (Note this tool will only work on Windows NT/2000/XP/2003. It will not work with Windows Vista.) Download and run Event Log Explorer.

One time initialization

Click Tree->Show Tree
Click File->New Workspace
Click File->Save Workspace As (and save your workspace file anywhere you choose)
Example: To Filter / View / Export Recent Error and Warning Log Events

Open an Event Log
>> (e.g Typically, you only need look at the System Log (for System event records) and the Application Log (for Application related events)
Filter the events you want to see (for this example we filter to only see Non-Information events that occured in the last 7 days)
>> Click View->Filter.
>> Uncheck Information. Towards the bottom of the filter window, look for ?Display event for the last? enter 7 days. Click OK
Click File->Export Log to save a copy of the events for later viewing or sending to others
>> Check: Text file, All events, Event Description
>> Uncheck Export Event Data
>> Check Close dialog when done
Click Export and save as a txt file on your Desktop
Help Troubleshooting an Event

Double click an event to see the "Event Description" (which provides more detail about the event)
Click Event ID Database button for an web page a... Read more

Answer:"Event Log Explorer" tool helps manage/analyze/report on your Windows Event Logs

I use the subscription to EventID.net. It has been greatly helpful. I don't have this analyser but am a big believer in using the Event Viewer. I'll add a description I have written up which will help in determining the Events: This may be useful in addition to the Event Analyzer.

One thing I have not been able to do is keep the filters set with the software in the OS.

Find the Error(s)in the Event Viewer that correspond to the crash/freeze/error message/blue screen, etc.:

Description of the Event Viewer:




Unfortunately, many Windows XP users aren't aware of the Event Viewer, what it is, where it is, how it can help with a problem:
The Event Viewer has logs for everything that happens on the computer. There are three sets of logs: System, Applications and Security. By opening the first two to display the Events, you can look for Errors that correspond to the time of the problem- in your case, the crash.

There are three types of Events in the System and Apps logs:
1. Information (white circle w/blue i): this is just basic documentation of the normal working of the System or Apps.
2. Warnings (yellow triangle w/black exclamation mark) noting some problem at that moment. Warnings usually resolve on their own. If they do not, they become>>>
3. Errors (red circle w/white X- they document something that didn't work or isn't happening as it should. Each Errors has three parts: an ID#, a Source and a Description. By doing a right clic... Read more

1 more replies
Relevance 84.46%

i've been relying on going to "internet options","general" and "delete" then ticking all the boxes on that page..i found out that by doing this,my temporary internet file swere NOT being deleted.is this a vista problem? my pc came to a complete sludge of a slow down today and i found that my internet files folder had files going back a year that hadn't been deleted as i've been relying on ticking those boxes..i had tons and tons of and tons of files.i'm wondering if this is the norm and also is it possible that other files are not being deleted when using that method? if so,then i probably have folders that are totally loaded with trash.
 

Answer:Solved: Had to delete temp internet files by "view files" ,"select all" ,"delete"

Have you ever unticked Preserve Favorites website data?
 

1 more replies
Relevance 84.46%

Hey everyone, First post!

Anyway, I built a system:

Antec Sonata
Athlon 2600 333FSB
Asus A7N8X Deluxe
512 Corsair XMS
Geforce FX 5200 Ultra (PNY)
2 x 80GB Seagate Barraccuda (In SATA RAID O)
Samsung SM-352 CDRW/DVD combo
Samsung Floppy

That said, I installed XP home successfully, but when I try to install a lot of my drivers and updates, such as SP1, I get the error "Failed to install catalog files", preventing installation.

How can I fix this?

More replies
Relevance 84.46%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics 3000, -1988 Mb
Hard Drives: C: Total - 476837 MB, Free - 271044 MB;
Motherboard: ASRock, Z68 Extreme3 Gen3
Antivirus: AVG Internet Security 2014, Updated and Enabled
-----------------
Problem:
My Windows 7 Professional "Explorer" tree (not Internet Explorer) no longer lists my CD/DVD ROM DRIVE under the Device Manager/Drives. It used to.

I've checked the System Registry and it has lots of info about that ATAPI drive, but my system fails to find the "cdrom" driver (which is the one Windows 7 uses by default). It's not a 3rd-party driver.

The tray on my CD/DVD drive opens and closes properly. Windows just won't recognize the drive, so I can't use it.

I'm hoping someone can offer a 'manual' solution to get it working again. I do not want to spend a month to reinstall my OS and tons of hard-to-configure software. I've read countless other posts and solutions, both here and on MS's sites. The info on MS's sites is not even understandable. It's too vague and often doesn't even apply to my situation.

Note: The error (7026) message is:
"The following boot-start or system-start driver(s) failed to load:
cdrom"

-----... Read more

Answer:Error 7026 "The following boot-start or system-start driver(s) failed to load: cdrom"

8 more replies
Relevance 84.05%

I am trying to rebuild by search index because my computer won't let me arrange items using the "Arrange By" option... However, when I try and load my indexing options to rebuild the index it will sit there and say "Waiting to receive indexing status". If I click the "Advanced" button it will freeze... I also receive an icon and loading display problem SEE PIC#1. Also when I click on "My Computer" it sometimes will sit there searching and it won't load. SEE PIC#2

I have tried the following:
1. Restarting the "Windows Search" service multiple times at different boots.
2. Deleting the files contained in the folder "C:\Windows\System32\config\TxR\". http://support.microsoft.com/kb/2484025
3. Stopping the "Windows Search" service then I opened up "regedit". I went to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSearch, SetupCompletedSuccessfully" I changed the value from a 0 to a 1. Then I rebooted my PC. I then went back to the same key and changed it back to a 0 and rebooted my PC again.
4. Turning the "indexing service" on and off from the "Turn Windows Features on or off" menu.
5. Microsoft Fixit Indexing Troubleshooter
6. Sfc /scannow
7. Tried this hotfix http://support.microsoft.com/kb/977380
8. Tried another user account and creating a new user account
9. Tried resetting folder view to "defaults" http://www.sevenforums.com/tutorials/15692-... Read more

Answer:"My Computer" won't load, Disappearing Icons, & "Arrange By" option won't work. Help?

13 more replies
Relevance 84.05%

Hewlett-Packard
HP Pavilion dv7 Notebook PC
Intel(R) Core(TM) i7 CPU
RAM: 6 GB
64-bit Operating System

It started while i was browsing anime viewing websites on Firefox.(Both of which I've used for years.) Also note AVG's Resident Shield was online, and i don't remember going anywhere strange or downloading strange files. I had scanned used malwarebytes anti-malware the day before and found nothing.
Randomly, I received a blue screen stating something like "Client side encryption is not supported by the remote server even though it claims to"

After restarting, my computer failed to start normally.(I think it failed to load the operating system?) It went to some kind of auto repairing thing to fix itself in order to startup properly. But it failed.

Safe mode = same as above

Last Known Good Configuration = same as above

Bootlogging? Debugging? Description was it would mention at which startup file it failed to load. It loaded files from the top of my screen to almost the middle, which is about < 10 things. It failed, and without telling me any new information, did the "same as above".

3 attempts of system restore. One was more than a month ago. It would get to the end and "finish" restoring for a brief moment, then immediately show an error pointing to "...Appdata/Roaming/Firefox/(jumble of letters).profile/session(the rest was cut off, but i thought i could see half an "s") It said it couldn't replace the file?

chkds... Read more

Answer:"Client Side Encryption not supported by..." --> "computer failing to load"

Its the server that you were on, it did not like the encryption that that server was using.

4 more replies
Relevance 84.05%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

Answer:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Relevance 84.05%

Have copied the "Pro_highres" files to my computer and deleted the smaller "Pro" files on the phone (Lumia 930) in order to save space. To me it seems logical that the larger files are the master files and should not be affected by removal of the smaller copies. However, the highres files which by mistake were not copied before the the smaller Pro files were deleted can not be opened, copied or viewed. The larger files can be opened on the computer even without the presence of the smaller files. While the phone is connected to the computer it is still possible to see the file names of the highres files on the computer screen but not on the phone - and again - I can not copy them from the phone to the computer nor open the files. What has happened and how to I get access to these photos??!! Thanks for any help!

Answer:Unable to see, copy or open the "Pro_highres" photo files after deleting the smaller "Pro" files?

Use File Browser on your computer to rename them to the file name of the 5MP version.
I'm finding that manipulation of the High Res jpegs from Lumia Camera on the phone is just not worth the blasted efforts. Shoot 5MP + High Res DNG and put Rawer on your phone. Then shoot your High Res jpegs in ProShot or Camera360 Sight and access them as normal through Camera Roll.

3 more replies
Relevance 84.05%

I have windows xp/professional sevice pack 3. since 01/09/2015, after start up a box displays 'user environment error- cannot load locally saved files ,it might be due to network provider or some else.' Also system restore does not take place. pl.help. Provide suitable & authentic solution. Thanks.
 

More replies
Relevance 84.05%

Hello Folks,

Panda will not allow me to turn back on "permanent protection", and I get a popup that says, "Could not load the permanent protection for files".

Has anyone encountered this? Know what is wrong?

The machine is Dell Dimentsion 4300, P3, XP SP1 (*gasp*)(lame, yet unsurmountable, reason), Zone Alarm (AV on or off panda gives same message)

Thanks for any thoughts.

D
 

Answer:Panda: "Could not load the permanent protection for files"

I had that problem, and I emailed Panda, and they told me to make sure that I fully uninstalled any previous antivirus programs, then to reinstall panda.
But that didn't work, so I ended up switching to a different antivirus
 

5 more replies
Relevance 84.05%

I am using Windows XP Media Center. I downloaded SP2, then uninstalled it. I have used system restore several times just to get most of my system working again (my second monitor feature was messed up). Now when I try to use the TV part of my Media Center, I get the following series of error messages:

Cannot Load Critical Files
Some of the files needed to properly play video are missing or corrupt. Try restarting Media Center or restarting the computer to see if this fixes the problem. If it does not, it may be necessary to reinstall Windows.

When I exit out of Media Center, I get the following:

ehshell.exe - Common Language Runtime Debugging Services
Application has generated an exception that could not be handled. Process id = 0x9a8(2472) Thread id = 0x9ac(2476)

Finally, when I try to get out of that error message, I get:

Attempt to launch a JIT debugger with the following command resulted in an error code of 0x2(2). Please check computer settings.
cordbg.exe!a0x9a8

Can anyone please help? I called HP Support several times, but they were no help at all.

Also, does anyone know why my restore points suddenly disappeared? I didn't turn off system restore or anything... all of my points that preceded this morning are gone now!
 

Answer:"Cannot Load Critical Files" for Media Player

Bump;
I'm wondering if someone with more 'know' than me will recommend you do a repair via recovery/ or use the run/sfc command. I'll detail those for you if it's suggested.
 

2 more replies
Relevance 84.05%

Microsoft Office (2003) error: Can't load speech recognition files / cannot install the necessary files due to the windows installer, error: 1635.

This error has been affecting Word/Excel/Outlook since installing 15 MS security updates pertaining to Windows XP (all installed on Oct 15/09.)

 

More replies
Relevance 83.64%

HI,

I'm getting this stupid error when trying to view: Control Panel\System and Security\System

"The page failed to load"

Don't know if you need it but I added a HJT log...

Thanks!
 

Answer:"The page failed to load" Control Panel\System and Security\System

16 more replies
Relevance 83.23%

Hello everyone
Recently, I'm playing Anno 1404 (also called Dawn of Discovery) in my Vista Home Basic 32bit finely until I saw the problem with the "save/load" problem. First, it saves "systematically" but, the save is corrupted to a 5kb file. Second, the game can't load the 'properlly saved' save file, and also the corrupted one also.

Few of the players had the similar problem, and someone said that making another user account works, and I tried and really worked for me. Yes, I can play this way, but all of my files and infos are saved in the Administrator account, and I don't want to switch users just to play that game

Recently I found a useful MS program, which is runas, and found how to run as another account. It asks for the account pw, and everythis was fine, but it doesn't run my game
It just closes the cmd and nothing happens. What could be this problem?
I hope Ubi gives out this fixing patch fast

Answer:Anno 1404 "save/load" problem and using "runas.exe"

Figured it out with Runasspc program (which also saves the password! )

1 more replies
Relevance 83.23%

Does Microsoft Oulook "load" .ost files when the program is first started? I know that it loads the .pst file and that a bloated .pst folder can cause a very slow start. Not sure if it's necessary to trim down the .ost files too.

And does anyone know WHY Outlook has to "load" these files at start up? I have 3 years worth of emails in my Netscape mail but that never slowed down the launch of the program. Doe does Outlook load these files into RAM memory?
 

More replies
Relevance 83.23%

Microsoft Office (2003) error: Can't load speech recognition files / cannot install the necessary files due to the windows installer, error: 1635.

This error has been affecting Word/Excel/Outlook since installing 15 MS security updates pertaining to Windows XP (all installed on Oct 15/09.)

I hope someone can help.

More replies
Relevance 82.82%

Hi, I recently made some upgrades to a (previously fine) PC - they were

- Installing 4GB extra RAM, of the same variety
- Reinstalling windows on a new SSD (a Samsung SSD 850 EVO 500GB)

I previously also upgraded to Windows 10, but a bunch of blue screens and other issues later I reinstalled 7. I'm still having problems though - the current symptoms are that every so often (1-3 times a day) the computer will hang for ~1-2 minutes on the 'starting windows' screen. When it finally loads, it will often hang for further extended periods before settling down. I checked in these event log and during these periods there will be many 'atapi' errors, with Event ID 11 "The driver detected a controller error on \Device\Ide\IdePort0." (I have attached a screenshot).

There will sometimes be other errors, usually relating to the timeout of certain things, but the previously mentioned error is by far the most prolific. On rare occasions there have been more serious errors - never blue screens since going back to windows 7, but once I booted to a black screen with just a mouse (was able to shut down via task manager then following a restart seemed ok).

Through some investigation, it does seem to be that the root cause of the problem is the SSD; I identified this a while ago and have tried various fixes, including:

Ensuring my Motherboard (a M4A78LT-M) SATA ports are configured in AHCI mode (they were previously IDE). This also led me to completely re-installing windows in an e... Read more

More replies
Relevance 82.82%

Hello Guys I need your help in my laptop Graphics error.I uninstalled my AMD graphics card recently from control panel.Now i am trying to install the drivers and i have downloaded my graphics card driver from www.amd.com .But when the drivers installing there is a error message coming that is "failed to load detection driver".Please Help Me.
My Laptop is HP Probook 445 G1.
 

Answer:AMD Graphics Driver Error "Failed To Load Detection Driver"

One more thing guys.My graphics convert into Standard VGA Graphics.
 

3 more replies
Relevance 81.59%

Afternoon, I'm a bit boggled by this issue we are having on a PC at our office. It seems that the PC normally will boot up and the memory usage will be low 2 GB / 16 GB until 10-12 minutes go by then it shoots up 11 GB / 16 GB. It's really odd and I can't explain it, since no applications are started.

I took it upon myself and downloaded RamMap. Using RamMap I was able to determine that the memory is caused by "mapped files" under "file summary" I can see the two large files which are to blame. But I'm not able delete these currently until tomorrow to confirm the user doesn't need them.

What I'm looking for is an answer as to why these files seem to be singled out? Thanks in advance. I've included a screenshot to the RamMap findings and my understanding with how memory is handled is limited.

EDIT - I can see now only 1 large file is being selected for "mapped file".

Answer:Windows 7 Large files stuck in "mapped files" / "stand-by"

Attachments -

1 more replies
Relevance 81.59%

I just got done using the MS fix it tool to remedy the compress old files hang that occured when you used the disk clean up tool . There were about 20k old files that no matter how many times you ran disk clean up they were never compressed ...as a matter of fact at times I would actually see an "Increase" in files listed in the compress old files line AFTER I did selected "compress old files" clean!!!

So I used the MS fix it tool to solve the problem and ....you guessed it the tool removed the option for "compress old files" ! Now it is no longer there. MS states that they deleted this option to prevent the hang issue. But this is why I want to know whether these old files are actually being compressed when i use the defrag and it says "compacting files" ..

Any help would be greatly appreciated.

Answer:Is "compacting" files in defrag the same as "compressing old files" in disk clean up?

Hi

The 'compressing files' referred to by a defragmenter is the process of moving the files it has put together to the start of the drive.

When defragmenting files, it moves the pieces of the file to an empty space further into the drive. Once it has done this to all the files, it moves them back to the start of the drive as this is generally the fastest part.

This doesn't compress files like the option in disk clean up.

8 more replies
Relevance 81.18%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

Answer:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Relevance 80.77%

Hi there,
Can someone please help to shed some light on this, or possibly fix this issue?
I've been trying for ages to get my parents computer to download and install updates.
It's running 7 Home Premium 64 bit with SP1.
The Windows Update page shows that Windows could not search for updates, which resulted in the error 8007370B
The link on that page to get help for this error has no results.
The system update readiness tool failed to fix the issue
sfc /scannow in an elevated command prompt results in the error message
Windows resource protection could not perform the requested operation.
I also tried to force WSUS offline updates, but ended up having to remove the temp admin account and cancel the updates when that failed.

log files attached:
Attachment 362134

Answer:Failed updates "WindowsUpdate_8007370B" "WindowsUpdate_dt000"

Your first run of CheckSUR found a fair number of errors, and managed to fix them, mostly - but to remain until now...

Code:
Checking Component Store
(f) CSI Payload File Missing 0x00000000 _isdel.exe wow64_microsoft-windows-i..llshield-wow64-main_31bf3856ad364e35_6.1.7600.16385_none_ca61f601a4548b8e
(f) CSI Corrupt Identity 0xC0150017 c64c420f5864b56f41d74a09d3a4941a, Culture=neutral, Version=6.1.7601.18283, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versyo~Scope=NonSxS c64c420f586..a09d3a4941a_31bf3856ad364e35_6>1.7601.18283_b5294749e54eed83 Bad identity

I need to have a look at your COMPONENTS registry hive

Please copy the C:\Windows\System32\config\COMPONENTS file (no extension) to your desktop and then compress it - upload the compressed file to your favoured fileshare site (preferably Dropbox or OneDrive) and post a link.

9 more replies
Relevance 80.77%

Hi all,

I'm puzzling this one. In the folder options when I choose 'view' the radio button to show the hidden files is missing. I've already checked the registry at the HKLM/Software/Microsoft/Windows/CurrentVersion/Explorer/Advanced/Hidden

and everything seems ok (value for 'Type' is 'group' etc.). Using the XP tweak (Kelly's corner #155) shows the hidden files, but the button still missing.

Another thing that I encountered with was that from the start menu the "Help and Support" not working. Again, the registry seems fine, and the process is activated (started). This came up when I tried to use system restore option - with no success.

Virus scan didn't find alerts of any kind

To make a long story short- below is the log file of HiJackThis. Please review it and reply if you see something to be concerned with for repairing my computer.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:36:54, on 21-Dec-08
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16762)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\McAf... Read more

Answer:missing "show hidden files" button + "Help and Support" not working from start menu

Ok I found the answer (after quite a lot searching), as follows:

1. for the 'Hidden files' radio button - I used methods 1 and 2 from here-
http://www.technize.com/2007/05/13/s...s-not-working/

2. for the helpcenter I just reinstalled it as described here -
http://windowsxp.mvps.org/rebuildhelp.htm
note that the file 'dataspec.xml' is needed to be available for this, and it can't be done directly from the XP CD. The thing that worked for me was to insert the XP CD, and use the file that in my computer (C:\) and afterwards another file on the CD.

Again, all this happened with no virus detection, so I believe that there is no infection. However, if someone has remarks on the HiJackThis log I've put, feel free to add them.

Have a nice day,

Fitch.

1 more replies
Relevance 80.36%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

Answer:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Relevance 80.36%

Good Morning,

I would like to introduce myself. I am new to the forum. Should I address an issue inappropriately, kindly alert me.

Most recently, I have experienced multiple PC issues. Recently, I performed a System Recovery and encountered the following ?

1. Cannot perform a SYSTEM RESTORE. The message is: ?Restoration Incomplete. Your computer cannot be restored."

2. When I booted up this morning, and DID NOT HAVE A DESKTOP.
The screen was blank ? no Icons.

3. The items below are APPEARING IN MY TEMP FOLDER, and are located at: C:\DOCUME~1\COMPAQ~1\LOCALS~1\Temp:

........a. 415303181927525125.tmp
......... plus similar numbers.

........b. IswTmp
........c. msohtmlclip1
........d. msohtmlclip

I delete the above items through safe mode but they re-appear.
** I am MOST CONCERNED ABOUT Items 1 & 2.

SYSTEM SPECIFICATION:

? (DESKTOP PC) Windows XP
? (SP3) HP Compaq Presario 061 - Media Center Edition,
? AMD Athlon (m) 64 Processor / (X 86-Based PC - 32-bit package)
? MOTHERBOARD Chipset - ATI RADEON XPRESS 200 CHIPSET
? Version 5.1 / 2600 Build Processor

** If someone would give me some feedback, I would appreciate it tremendously.
** THANKS IN ADVANCE.

Kind regards,
AJ

Answer:NO DESKTOP after booting up & SYSTEM RESTORE "Incomplete" & "Strange" Temp Files

Usually when the machine has a "blank" desktop, the boot/startup process has been interupted or is frozen to before Explorer is launched.

You can launch Explorer manually be navigating C:\Windows and double-clicking "Explorer".

If successful, do the following:

Start>Run>(type) "msconfig" and turn off all non-MS services and all startups.

Then, Start>Run>(type) "cmd", and at the command prompt type "chkdsk /f" and schedule a chkdsk to run on next reboot.

Reboot system and report results.

3 more replies
Relevance 79.95%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

Answer:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Relevance 79.95%

Mods, if you feel that this thread is more of a "Windows" issue, please feel free to move this thread.

Here last year I did my second build because I was having "boot" issues. Wasn't certain what exactly the problem was at the time. But something some how screwed up the boot sequence in my system, and where everything was pretty much "outdated." I just went ahead and did another build.

Though, since then I've been pondering around with the thought of using a SATA to IDE adapter so that I can retrieve what ever salvageable data I can from one of the two HDD's that was in my last build. So I finally broke down and ordered a couple different one's earlier this week.

Unfortunately, I've been running in to some problem(s) when I try to launch with the IDE in place.

Upon initial launching, the boot sequence seem to take some time longer than it normally does with out the IDE HDD in place. Though after a 15-20sec lapse I'll get an error screen displaying an windows error code of "0xc000000e" with a prompt message below stating "The boot selection failed because a required device is inaccessible"

I searched all over online to see what that error code represents, only to get "pages after pages" of sites with each site telling me something different.

I have no intentions of using this as a third HDD in my system. I just want to retrieve select data from it.
 

Answer:Error code "0xc000000e" "The boot selection failed because a required device.........

16 more replies
Relevance 79.95%

Hi, as with many I have upgraded to Windows 10 today and it is going well except for the fact I am unable to save any files or create new ones in the Documents and Pictures folders or any sub-folders within these folders, and I have no idea why it is doing this. For instance, I tried to save an image created in paint and attempted to save it in the Pictures folder, it gave me the error message seen in this picture below:

Note, I am the only user on the system, and also the admin account so I do not know why it says this. Clicking Yes on the box does nothing and the same thing still occurs afterward. In addition, bringing up the right click menu and going to new only allows me to create a new folder, and the windows admin shield icon appears next to it. Deleting files also prompts me to ask for admin permission but in that case I can simply click the continue button and it goes through. Any advice?

Answer:Unable to create or save files in "Documents" and "Pictures" folders

Open the folders properties and got to the security tab and change permissions for your account, if you can't change permissions take ownership of the folder, if you can't take ownership of the folder activate the super administrator account and change permissions and/or ownership.

There are lots of guides on how to do all of that if you need more detailed steps.

27 more replies
Relevance 79.95%

Hello,

I've scanned my laptop with SFC four times in this past week, and each scan ended with the same failure to repair specific files. I'm uncertain how to proceed with these corrupted files.

I followed the instructions in the SFC /SCANNOW tutorial; I installed the System Update Readiness Tool (CheckSUR in attachments) after running SFC three times and it managed to find and fix some sort of error. However, the results seem to be the same in the new SFC scan logs.

I also tried obtaining a .iso of Windows 7 home premium from Microsoft's website (Access Denied) to run a repair install, but it will not accept my product key due to it being a pre-installation provided by Samsung.

I do not have a Windows 7 installation disc so I cannot manually replace them like the tutorial suggests.
Also, I don't know if this is relevant or not, but I ran the WindowsUpdateDiagnostic.diagcab troubleshooter several times as well (dism.txt is in attachments). Every single time it says that two problems were found:
1. Problems installing recent updates (Not fixed)
2. Service registration is missing or corrupt (Fixed)

Additionally, I've recently noticed that my free hard drive space has been decreasing rapidly. In the past two days, it has decreased by 2 or 3 GB, despite not downloading or installing anything. Is this related to my current problem with the corrupted files or something else? I don't know how to find what's eating up my storage space.

Any advice is appreciated,

Thanks.

More replies
Relevance 79.95%

hi every body
My PC has lots of files called "Thumbs.db" & "System volume information" in all its drives.I cant delete these files and I think the cause of shutting my pc down automatically and showing blue screen is these files.the operating system is win xp/sp2.
I don't know what to do with these and what anti virus will delete them.please help me.
thanks
 

More replies
Relevance 79.95%

Computer infected with "Phoenix Toolkit Website 4" rootkit/trojan virus identified by both Norton Anti-Virus and Webroot SecureAnywhere. Although the computer is having no symptoms of spyware (besides the search engine highjacking that no longer occurs) messages of blocked threats continuously pop up from Norton Anti-Virus.

Windows 7 Ultimate
Intel i7 860 CPU
8.00 GB DDR3

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:01:58 AM, on 12/26/2011
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Norton AntiVirus\Engine\17.9.0.12\ccSvcHst.exe
C:\Program Files (x86)\Ralink\Common\RaUI.exe
C:\Program Files (x86)\iMesh Applications\MediaBar\Datamngr\datamngrUI.exe
C:\Program Files (x86)\LP\4919\93C.exe
C:\Program Files (x86)\Real\RealPlayer\Update\realsched.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\73949\lvvm.exe
C:\Program Files (x86)\BitTorrent\BitTorrent.exe
C:\Program Files\Webroot\WRSA.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Norton AntiVirus\Engine\17.9.0.12\MCUI32.EXE
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Users\Zohair Razvi\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\2HOUF0NM\HijackThis.exe
R1 - HKCU\Software\Microsoft\... Read more

More replies
Relevance 79.95%

every time i try to open one of this folders a window apears with this content
cant have acces to C:\Documents and Settings\Mike\Local Configuration\{one of these folders} acces denied
this affects my IE i cant download nothing thru IE all my files on that locations i cant set dispaly pictures on WINDOWS LIVE messenger and all thinks that has anything to do with those folders
any suggsestions or idea
hope you can help me
pd ive scanned my computer and its all clean also i cant install windows XP serivce pack 2 im kinda stucked :/
 

Answer:cant open "temprorary files" "aplication data" "program data"

11 more replies
Relevance 79.54%

Trying to start a live trace with USB-USBPORT and USB-USBHUB on Win7.  Getting "Failed to Start Enable Session Due to the Following Error(s):

Enable session "MMA-ETW-Livecapture-79f84d93-a9b8-4484-b09e-ad9e315ea8d5" failed.
Start session "MMA-ETW-Livecapture-79f84d93-a9b8-4484-b09e-ad9e315ea8d5" failed
At a loss as what to do to try and fix this.
Suggestions anyone?
Thank you,
Roger

More replies
Relevance 79.54%

I'm posting this in the Vista forum because this has never happened with Windows 2000 or XP.

I bought two exact duplicate models of hard disks. I set up Vista Ultimate on one of my systems. I used Acronis True Image 10 to clone the operating disk to the factory-new, never-used, same model disk as a backup drive in the event the first disk failed. I put in the clone to be sure it runs; but, I get the error mentioned in the title of this thread.

Now, if the second disk is supposed to be a clone of the first, why does this happen and how can I fix it?

I'm not married to Acronis for this job so I would use any disk cloning tool that makes a sector-for-sector copy. I use Norton Ghost 2003 for making sector-for-sector raw image (forensic) copies of PATA drives; but, these are SATA drives and Ghost 2003 simply sits there like Tarbaby and he don't say nuttin' to no SATA drive.
 

Answer:"Windows failed to start" "\Windows\System32\winload.exe missing or corrupt"

7 more replies
Relevance 79.13%

I'd like to use CCleaner to delete the contents of my TEMP folder. Not Temporary INTERNET files folder; I mean the TEMP folder in C:\Documents and Settings\USERNAME\Local Settings\TEMP . I think it's holding leftovers from application installs, etc. Is there one in the Windows folder too? (what's the difference?)
CC has a a box to check that deletes what CC calls simply "Temporary Files" but it only deletes the temporary internet files and my TEMP files are still there even thoug I've rebooted, etc. "Temporary files" doesn;t mean the TEMP filder to CC.

Also, would it be fine for me to delete contents of TEMP simply by doing select>delete? For some reason I didn't think it should be done that way though.
 

Answer:CCleaner: "TEMP files" vs. "Temporary Internet" files

12 more replies
Relevance 79.13%

Dear all,

I just upgraded to Windows 7 Home Premium 32bit, and since then I have found that I cannot send some files from my Nokia Xpress Music phone to my laptop. I am using a Fujitsu s6520 Laptop.

I have successfully paired the phone and PC together, but whenever I try sending a file from my phone to the laptop, the file transfers for about 3 seconds, then the "sending failed" message appears, and the laptop says the transfer was cancelled. I have tried transferring a 128kb file, and since that fully transferred in under 3 seconds, transfer was successfully completed.

I am able to synch perfectly from PC Suite, but in device manager, my phone is listed as "bluetooth peripheral devices" under "Other devices", with an exclamation mark next to it.

Can someone please help solve this problem?

PS On a side note, I didn't have to click the "receive a file" button for the phone to start sending a file in Vista. Is there any way I can get around this in Win7?
 

Answer:"sending failed" when sending large files from Nokia phone to laptop

6 more replies
Relevance 79.13%

I know there are a handful of threads with the above error message and code, but I have yet to see a thread with what was my reason for the error code. I wanted to pass on what I discovered and how I fixed it.

I started with a standard Windows 7 Pro install joined to a domain. This machine has restricted Internet access so I downloaded the ISO on another machine, burned it to media and ran the upgrade on the test machine from within Windows. The machine passed all of the checks and tests and reported no issues. It would get to the first "Installing" screen, display 0% and then almost immediately give me the pop-up "Something Happened: Install Failed"

I ran it as administrator, I did a Clean Boot, I uninstalled all of the AV/Malware/security type stuff. Nothing worked. I finally found the setuperr.log in C:\$Windows.~BT\Sources\Panther. Found several error lines and the code was always 80070005. I found a line where the installer had a problem copying install.esd. I cleared out the $Windows.~BT in case there was file corruption in the directory somewhere and tried again - no change. Finally, I decided to create a USB install media and viola! The install completed. And I used the same ISO to make the USB that I had used to make the DVD.

I've read a few other threads where people had problems with the ISO. So the moral of the story is if you need to use install media, use the USB installer.

More replies
Relevance 79.13%

I am receiving these 2 error messages (see below). Message #1 pops up first and then is followed by Message #2

Message #1:

"hpqthb08.exe-strong name Validation Failed which says, (Strong name validation failed for assembly C:\Program Files\HP\digital imaging\bin\hpqthb08.exe The file may have been tampered with or it was partially signed but not fully signed with correct private key )"

Followed by Message #2:

hpqth08.exe Common Language runtime Debugging Services. Click OK to Terminate or Cancel to Debug

HELP!
 

More replies
Relevance 79.13%

I am receiving these 2 error messages (see below). Message #1 pops up first and then is followed by Message #2

Message #1:

"hpqthb08.exe-strong name Validation Failed which says, (Strong name validation failed for assembly C:\Program Files\HP\digital imaging\bin\hpqthb08.exe The file may have been tampered with or it was partially signed but not fully signed with correct private key )"

Followed by Message #2:

hpqth08.exe Common Language runtime Debugging Services. Click OK to Terminate or Cancel to Debug

HELP!
 

Answer:ERROR MESSAGES: ""hpqthb08.exe-strong name Validation Failed..."

Closing duplicate to: http://forums.techguy.org/windows-nt-2000-xp/545998-error-messages-hpqthb08-exe-strong.html
 

1 more replies
Relevance 79.13%

Hi. I'm thinking about repairing Windows 7Home Premium 32bit with the DVD, because of BSOD, but I hesitate.

I first need to know if the backup folder called "Windows.old" will be a COPY (keeps Date Modified but updates Date Created) or a CUT (simply moves all folders to an other, thus doesn't change Date Created). Thanks!
So of course, only those who have ever reinstalled Windows 7 may know the answer. If you don't know but have reinstalled Windows 7 at least once, please spare 30 seconds to check, simply find a file like a picture or music that you had before the reinstall, and see in the bottom bar of explorer if its Date Created is the original or the reinstall date. You can also click Display tab in Explorer, then Sort by > Others > check "Date Created", > OK > Click display again > Sort by > Date Created. Don't mistake with Date Modified, I know the original Date Modified is kept upon copying, but it will update if you modify the file obviously. Please be honest and double check, losing 5.9 years old dates of my past would be heartbreaking, like mixing the pages of my diary!

Date Created is very important to me (and is underrated because it's not the default sorting option unlike Name/Type/Date Modified) because my computer is 5.9 years old, now has thousands of files and folders and it's easy to find them back and organize them with Date Created sorting if I didn't write tags or description in the file name.
If it doesn't ke... Read more

More replies
Relevance 79.13%

Hi, I've looked all over the internet in attempt to find a solution to a problem that's just affected my computer, and I haven't been able to find anything that relates specifically to the problem I'm encountering.

This hit my computer without warning, I switched it on this morning and it worked as normal, all of a sudden things started to freeze up. I restarted the computer, and now a lot of programs are refusing to open - Microsoft Office, among others, states "Error: There Are No More Files", whilst other programs such as Google Chrome and Internet Explorer state "Attempt to Access From Invalid Address", even when I am running them from their root folders.

I am running a Dell Latitude 830 with Intel Core 2 Duo T7250 (2.00GHz, 2M L2 Cache, 800MHz) Dual Core, 1.0GB, DDR2-667 SDRAM, 2 DIMMS, Intel Integrated Graphics Media Accelerator X3100 and am obviously using Windows XP. I have scanned my system with Avast Antivirus, which didn't state that there were any viruses, so I am stuck as to what exactly the problem is.

I'd really appreciate some help in figuring out what has happened, thankyou so much for your time in reading this!

Answer:"There Are No More Files"/"Attempt To Access From Invalid Address" Issue

I am having the same problem on the same exact hardware. i don't think it could be a hardware issue, but i could be wrong. i have tried repairing windows with no success. i'm thinking the only option is to reinstall windows completely.

13 more replies
Relevance 79.13%

The files in one of my folders aren't showing up. It's only that specific folder that is having problem. Whenever I try to access it, no files show up even though there are clearly files in it (Properties say 20.5 GB). And it will always stuck at "not responding"

This is what it looks like:

http://i.imgur.com/p2bCy4s.jpg?1

I've found a possible solution but since it deals with command prompt, I want to make sure I don't make things worse. I need to know what exactly the following command does:

attrib -h -r -s /s /d g:\*.*, in which g is the drive letter.

This video: says it reveals hidden folders but I'm not sure if it's relates to my problem exactly since Properties doesn't have "Hidden" checked. It only has "Read-Only" checked under the General tab.
 

More replies