Computer Support Forum

New comp. no post beep/Signal

Question: New comp. no post beep/Signal

so i bought parts and built..Rampage III Extreme: tested at store, worksIntel core i7 950: tested in friends comp, worksXFX Radeon HD 5970 Black Edition: tested in friends comp, works3x2GB Corsair XMS3 CHS DDR3 1600 CL: tested individually in all slots and also friends memory 2GB witch works fine, ram works1000W power supply, worksTested outside case, it doesen't short it out.all cables checked many times.tested with other monitors as well as resetting cmoseverything seems ok but no post beep/signal. please help me! i dont wanna pay 50-60? for fixing this.

Relevance 100%
Preferred Solution: New comp. no post beep/Signal

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: New comp. no post beep/Signal

MBoard standoffs in place ? ?Thermal paste applied correctly ? ?New or used PSU ? ?PS: Is this your 1st build ? ?

8 more replies
Relevance 79.95%

Hello.

I have an issue with the BIOS POST check that annoys me. The issue is that when I restarting my computer or turn it on sometimes during POST (when a Toshiba logo appears) there is a beep sound signal. Mainly there is no signal but sometimes there is very noise.

So, the question is: Is it a problem in the hardware or is it a problem in the BIOS (by the way, I re-flashed BIOS several times - no result).

Thanks.

Answer:Satellite Pro A - Beep signal during POST

Hi buddy,

That means you get only sometimes a beep code when you start the notebook or does it happen always?

Usually such beep codes mean that there is a hardware problem but I think only an authorized service provider can test this exactly.
What you can do is resetting the BIOS to default settings and if you have two RAM modules, test it with one module only.

5 more replies
Relevance 79.95%

I have a Compaq desktop which I have had sitting up for a while, it isn't but maybe 5 years old. I say it's been sitting up for about a year. Well anyways, I decided to break it out and get it going again. I got all my hardware, the CPU, HDD, 1GB DDR2 RAM, and a CD drive. I put everything back in properly and it does not POST beep at startup nor does the monitor get any signal. Anyone have any ideas what could be causing this problem?
 

Answer:No POST beep or video signal

See if there's anything in this post that helps; http://www.techspot.com/vb/topic113137.html

Oh, and did you remember to plug in the CPU (4 pin) power connector..? That can be such a deal breaker.

Sometimes, a PSU can go bad while sitting around. I've had one myself that wouldn't restart after it was powered off. (That said, the caps were whining pretty bad while it was running).
 

9 more replies
Relevance 79.95%

Hi all..

When I try to boot up my PC there is no signal to the monitor and I do not hear any POST beeps.I try to Any help please.
 

Answer:No post beep and no signal on monitor

Let's eliminate the obvious first:

Is there power to your pc and to your monitor, and they are both switched on?
Do you have power lights at both the monitor and the computer?
Have you recently moved /disturbed your computer "setup" /location?
Is it possible some cables may have come loose?
Have you tried the monitor on another (known good) computer?
Have you tried the computer with another monitor?

Then...

What were you doing the last time the computer worked properly?
Have you added any hardware or software?
If you turn on the monitor, and then turn on the computer, do you see anything on the monitor at all?
(most monitors today have a start screen made by the maker, before giving you a "signal not detected message and then going dark).

If you see a boot screen from your computer, can you get into your bios?
Can you boot to safe mode?

 

3 more replies
Relevance 79.95%

This is the second computer in a week from the same person, exact same problem. I turn on the computer, cooling fans start, I get no beep during the post (if that's even happening) and I get no signal to the monitor. ??? any ideas ?

Answer:No signal to monitor & no beep on post!!

Start from the beginning, Troubleshooting No Beep No Video - The PC Guide Discussion Forums - http://www.pcguide.com/vb/showthread.php?t=39685.Louis

3 more replies
Relevance 79.95%

Hey guys,

I have been reading these forums a lot without a proper account, solving various problems. However, with this problem i decided it would be better to ask for some hints towards the possible cause of this.

My system in its current configuration has been working well for over 2 years. Last night, when I shut it down something weird happened: the monitor turned off (entered idle/stand by mode) before the system actually turned off (that's the normal point when the monitor should enter stand by too).
Also, I left it around 5min but it remained in this state, not shutting down. I decided to turn it off manually, believing that it was not much of a problem.
This morning however, when I started it I got no post beep and no video signal. All the components seem to be working normally though(the green led is on, the hard drive led also flashes, cpu & psu fans are ok...). What could be the cause for this?

I tried cleaning and swapping the ram memories and it still doesn't work. If I restart after booting it, still no luck.

Any ideas?
Thanks

my rough specs:

AMD Athlon 64 4000+ at 2.4 GHZ
4x512MB DDR2
WD 320GB SATA
Nvidia GForce 7300 GT
ASUS M2N motherboard
 

Answer:no video signal/post beep

Have you got an onboard graphics output you can use, if so try it and remove the graphics card. If not see if you can borrow another graphics card to try.
 

1 more replies
Relevance 79.95%

The computer was built from scratch, specs are as follows...

VIA mainboard
P4 1.8 Ghz
120 GB 7200rpm IBM HD
1x 512 pc2100 DDR Ram
52x Sony CD-ROM
32x10x40x Sony CD-RW
GeForce 4 MX 440 64mb
1.44" Floppy Drive

mice, keyboard, etc...

crammed into a case with a P4 power supply... i think it's 350 watts.

It was built for a friend who's going off to college in a few weeks. It worked fine, got the operating system installed (Win2k) and all the software (word processor, etc). Loaded some pictures, set the settings to the person's preference and installed all drivers for everything. Then into a box it went, ready to go.

That was 3 weeks ago.

Hooked it up to let friend know where I had put some files and how to use the burner... a quick tutorial of the new system. The thing is, it won't start.

When powering on, all the lights come on on the case, on the CD drives, and you can hear the hard drive powering on too, all fans spinning and operational. The floppy however, does not beep or light up. The annoying part is the motherboard beeps for a really long time, pauses, and repeats. The monitor never recieves a signal, so it remains in standby. I tried a different floppy and reconnected it, same thing. Long beeeeeep... no POST beep. Everything else lights up / powers up though.

It was working fine and dandy before... superly fast too. Need help! Can't seem to get it up again

Much appreciated, thanks!
 

Answer:no POST beep or monitor signal

9 more replies
Relevance 79.13%

I've got an annoying issue with my PC, my PSU died not long ago so I replaced it but that didn't solve the problem. It revealed new ones.

At first, I would only get a flicker of life from the CPU fan, so I reseated everything and removed any excess cables. With only the RAM, CPU and graphics card connected, my motherboard cycled through and beeped once. I thought all was fine, so I relocated my machine to it's usual spot and hooked it up to the monitor. Switched it back on, no cycle, no beep and no display.

I tried a second motherboard, with only one stick of RAM plugged in, the CPU and a graphics card. Still no display and no beep from POST. I have no idea what's going on, I've tried resetting the CMOS on both motherboards, three different graphics cards, having the motherboard out of the case and all the usual checks.

Quite frankly, I'm stumped. I'm thinking it might be my CPU?

For reference my hardware is -

EVGA X58 1366 socket mobo
ASUS P6TD Deluxe 1366 mobo
Intel Core i7 920 CPU
Corsair XMS ddr3 triple channel
750w Coolermaster PSU (modular)
Nvidia GTX 285 Graphics card
Nvidia Quadro 600

Answer:My PC powers up but no signal on monitor or POST beep

If your PSU died it could have taken your CPU out too. You probably don't, but if you do have another CPU try it.

1 more replies
Relevance 77.9%

my PC starts up ,fans working , green light on motherboard ,no beep (post test skipped ) so I'm told .No signal to monitor.PC was working fine for more than a year.Ive tried almost every suggestion...like power off hold power button 30 seconds ,check cables removed graphic ram ,CPU ,reset ,f8 on start up,switch PCs ,monitors...Now I'm at the point were i noticed the PC doesnot beep when start up which means it skipped the post test...iv tried all suggestions on forums and still no beep.the only time it beeped three times is when i removed the ram. but still no signal to monitor.after installing the ram .no beep..i reset the CPU , i don't know what else to do. i read only one article about a jump start at this stage .i don't know how to go about this info:"Intel core 2 duo,nvidea graphics card 256MB cant remmember the rest PC is down thanks for your help

More replies
Relevance 77.9%

As in the title, this is a new build and my first build. The front power button works all the fans spin up, I have a via monitor connected to the gpu via HDMI to vga, but it says no signal. The speaker also gives me the one beep of post beep which means everything is working. So what should I change? And how do I boot or get to bios? Thanks.

Answer:New Build get post boot beep, no signal on monitor

Power supply to GPU?
4 pin power supply to connector near CPU?
Make and model of motherboard and GPU?

7 more replies
Relevance 72.57%

Hey all, i'm building a new comp. Check sig for hardware.

Anyways, my monitor isn't showing anything when i turn on the comp. just says no connection etc....

Mobo shows both red and green lights which i think is good from reading the manual.

It show c1 on the display which is normal but it never moves beyond c1... ???
 

Answer:New Comp having trouble..... No connection, check signal cable... No Post or no conne

16 more replies
Relevance 70.52%

My Asrock K7S8X, AMD+ 2.1, 512 MB PC has always run fine, but now it starts ok although the fan seems to be racing on, then the post beep, fine, then just as the fan starts to slow and the resultant volume deceases from the aforesaid fan, a second post-style beep occurs. I have a program called MotherBoardMonitor which tells me that the minimum speed for the fan is 2500RPM, my CPU temp is (approx) 47 to 54 , Mobo temp around 31, what could the problem be, i cant find any specific info on the net after hours of looking, thanks for any help, G

Answer:startup-post beep- fan runs hard- 2nd post beep??

Before you do anything else reseat your RAM modules. If this doesn't fix it go back to basics - disconnect everything from your mobo except graphics card, power and RAM does it boot the monitor on start up? If not and you only have 1 ram module fitted beg or borrow another and try that - if you have 2 ram modules try them one at a time on their own. Post back when done and adviseRgds

2 more replies
Relevance 61.91%

Hi,
My laptop here is a Dell Inspiron 15, 3000 series. 
The laptop itself works perfectly fine, I am able to get into windows (which I installed myself, it originally came with Ubuntu). 
Occasionally though, it will do a BEEP BEEP BEEP PAUSE BEEP BEEP BEEP PAUSE (repeats).
This happens on boot and sometimes when I am using it. Sometimes it turns off suddenly when I am shifting the computer around. It's extremely loud.

What is causing this? The sound seems to be coming from around the area the Memory banks are under the laptop, but nothing seems to suggest that anything is wrong.
I took a suggestion and used FN+Power to do Hardware Diagnostics which said nothing is wrong.

What else can I try?

Thanks!

Answer:Dell Inspiron 15 - 3000 series - Beep Beep Beep Pause Beep Beep Beep

Hi,
I’d suggest that you follow the steps mentioned below and check if the beep pattern repeats.

Switch off the computer.
Disconnect the AC adapter from the system.
Remove the battery from the computer.
Press and hold down the power button for 15 seconds.
Then connect back all the peripherals and check if the beep pattern repeats and reply us with the beep count.

If you still receive 3 Beeps on the system then it indicates System board failure.. You will have to replace it on the laptop.
Please let me know the findings.

3 more replies
Relevance 61.91%

Hi
I am getting beep sounds when i turn on my dell inspiron n5010.
Nothing is showing up other than beep sounds.
Please help me out
Regards
Ganny

Answer:RE: Dell Inspiron 15 - 3000 series - Beep Beep Beep Pause Beep Beep Beep

Hi Ganny,
What are the exact # of beeps in a cycle? 
Kindly review this chart and see page# 47 - it will help isolate the source of the issue. 
Based on the exact # of beeps, that part would need to be replaced.
Also, please click my DELL-username and write me a private message with the service tag and your Name for case records.
Let us know if you have any other queries.

2 more replies
Relevance 60.27%

Sys: W2K, SP4; IE6, 512megs SDRAM, 1.2 gig AMD Athlon CPU, ECS K7SEM mobo, Award 6 Bios.

Problem: Upon system startup, power comes on, but nothing else--no beep to indicated the system has entered POST. After several tries, it will finally beep and the harware will come to life.

Once working it will usually keep working as you'd normally expect as power cycle to work. It's mainly after sever hours of being off and now always, over night that the error occurs--no power to the hardware, until several tries.

History: Recently been hit with many Trojans & viruses. They've made it past my NAT router, past my software firewall and have taken apart my McAfee AV program. But they have been contained, before they could do any damage, so I hoped, except I just got a bounced email yesterday, that shows I have been spoofed and my address book copied and is being sent to. So a Trojan got in.

I have SpyBot S&D, Ad-aware, McAfee VS8, two firewalls going. I have cleaned all the viruses/Trojans off the system, out of the registry with S&D, Ad-Aware, VS8, Trendmicros VS and Pandasofts VS programs. As well as using CWShreeder, MRU Blaster, BHO removers, HiJackThis.
The system is clean. no hidden files, every thing ok. It doesn't seem to be an OS problem.

A week ago, my power supply went out.
I replaced it.
It's since replacing it and getting all the viurs/trojan hits that the problem has begun.

I thought it might be the new PS, so I put in another, ... Read more

Answer:pre-POST failure. no beep, sys doesn't go to POST

13 more replies
Relevance 56.99%
Question: NO signal NO Beep

ok... recently ive had problem with my processor getting too hot. my computer was still operable, but whenever i was burning cds or doing multiple tasks on the computer it would begin to make a buzzing sound and eventually just shut down. so i bought arctic silver for the processor and that helped my problem for about a month, then the buzzing and overheating came back again even worst than before. so i came to the conclusion that i just needed a brand new processor. i bought a new processor and installed it along with the new fan it came with. now when i turn the computer on, the on lights come on, the fans are working too. but usually my computer beeps when i turn it on and it doesnt beep anymore. and my monitor is saying "no signal". before i installed my new processors, i could still boot up properly and do things on the computer, but now i cant do anything. while installing my new processor, are there any mistakes that could have been made to cause all of these new problems?
 

Answer:NO signal NO Beep

It may be the CPU Fan. Just try plugging in the original fan and then turn it back on
If it works, change over the fan

Also confirm that your Motherboard supports that CPU by checking your Motherboard support page (some info on that h e r e)

And lastly check here: Have a read here: Tutorial: No POST (Power On Self Test)
There is also a link at the bottom of that guide for "Reseating your CPU"

Probably just the fan though
 

3 more replies
Relevance 56.99%

I have a Nf4 Ultra Infinity mobo that I sent back to the manufacture for an rma. They sent it back to me 2 weeks later. The first time i sent it to them was because when i started the computer, the loading screen would get stuck on the Infinity logo. I took the computer to a computer store, they told me the video card AND my motherboard was broken. I went to buy a new video card and sent the mobo in.

Now Im having this problem. I cant seem to start my computer up. On the monitor, it saids "no signal". Plus there is no *beep* when i power the computer on. I upgraded from a geforce 6600 to a 7900 now. I also bought a new psu , (500w). I have a AMD 64 3000 venice cpu. WHat could be the problem.

Today , DFI rep called me and tried to help me out but nothing worked and he suggested my cpu is broken?

*PS- I disconnected and replugged EVERY wire and pin together from each component at least twice, so dont say "check the wiring or connections".
 

Answer:No beep. No signal. Nothing. HELP

I would start by reading the NO POST guide in the guides forum.

Then check your PSU.
 

4 more replies
Relevance 56.99%

I just bought a new Lenovo H50-50 yesterday and when I turn it on, there's no beep and my monitor stats "No Signal". The fans are on and the lights show power plus activity. (Hard disk drive indicator blinking). I've tested my monitor on my laptop that it works fine there. It's a small AOC monitor, about a year old and I haven't found that there should be any issues with compatibility there. Maybe it needs a driver, but I can't install anything if I can't see what I'm doing. I've tried restarting and pressing F1, to see if I could make a menu appear - in case it's the OS not loading properly, but my monitor remains blank. Yes - there's the CD that came with the computer, but I fail to see how I am to use it, if I can't get any signal to my monitor. Any ideas would be appreciated, but keep in mind that it's only 1 day old and I obviously don't want to void the warranty.













Solved!

Go to Solution.

Answer:New H50. No beep. No signal.

Welcome to the Lenovo Community !
 
I am assuming that you connected the monitor to the on-board VGA connector that is on the back near the additional USB ports?  Are you sure that your model didn't also come with a graphics card that is mounted in a expansion slot on the back near the bottom of the tower?  If so, then try moving the monitor cable to the other VGA connector.
 
If you have just one VGA connector and it isn't working then I would recommend you contact Lenovo Support for additional assistance with your hardware problem.  Since the computer is brand new, you might consider just returning the computer to the retailer and have them exchange it for another one.
 
Lenovo Support - Ireland
 
1-890-928-860      OR       Email(Calls to this number are charged at local rate from a landline and have a minimum cost of ?0.05. Calls from mobiles may vary.)9:00 - 18:00 Monday - Friday

2 more replies
Relevance 56.99%

my mobo is a MSI k8n Neo4
my video card is a Nvidia 7900 GS
my power supply is an Apevia 680w Beast Power

about 3 months ago my computer started to get hard to turn on, it would do the normal beeps and stuff but then get stuck at the windows xp loading screen, and I would have to restart it like 5-7 times to get it to acually load up past that screen. after a few weeks of that it stoped giving me a beep all together. Everytime I tried to start it, it would just sit there, the fans would run, the cool cathode lighting would run, the video card ran, the HDs were spinning, the power supply lights up, but theres no beep signal and no video response.

Im pretty sure nothing is loose in my system. I unplugged everything pretty much and just had my powersupply, cpu, and mobo connected, but still no beep signal. I saw a post where someone suggested to unplug the cmos battery for 15secs, I did that but still nothing.
 

Answer:No beep signal, I think ive tried everything

Beeps are usually video, or memory errors on an MSI.
What do you consider "normal beeps and stuff?"But it appears you may have a hard drive problem, and possibly a cpu fan or thermal paste problem that needs exploration.
There have been a number of problems with the nVidia 7900 GS... When you have more than one problem, they are all difficult to trouble shoot.
I would go back to basics. Does your system have a floppy drive, so you can temporarily disconnect the hard drive.
Or can you use a second hard drive to do a clean install, so you can test all this equipment without the interference of Windows, infestations, and such?
 

5 more replies
Relevance 56.17%

seeking help.
Have a Sony PCV-RS520, past warranty. Working properly last night, this morning, system (from the PC tower) light was on, no signal on monitor. After hard power off of the PC, I tried to restart the machine, (as many had posted before), power on, fans on, just no signal on the screen.

I tested the monitor with my laptop, it works properly. I also tested the graphic card by putting a brand new card in, same problem. I concluded that it's not the graphic card.

I also tried to re-seat the RAMs (2x256) and graphic card, nothing changed. I am not very familar with the PC, so haven't tried to reseat the hard drive, motherboard, etc. I had a bad feeling that this is going to be ugly--besides the money to spend on whatever software, I will probably lose the photos on my hard drives.

Are there any suggestions as to what's the problem? I tried to follow the earlier posting, but didn't seem to see any resolution other than getting a new motherboard or hard drive. Help!
 

Answer:Power on but no beep, no signal

You mention that you popped another card in to test, and still received to signal to the monitor.

Was this other card you stuck in the same as the one you took out? If for example, you stuck and ATI in when your original card was an nvidia, then you wouldn't get a signal as the drivers are different.

Maybe this is obvious, but just wanted to make sure, as if you are not aware of the above, then it is not safe to rule out that your video card is the problem.

Assuming that the above is OK, and you CAN rule out a video problem, I have another question to help with the troubleshooting.

Does it sound like your system is actually booting into windows? In other words, can you hear your hard drive going nuts as if it is loading up windows?
 

6 more replies
Relevance 56.17%

My pc has this continues beep tone after removing the ram stick and putting it back in slot. I tried several time to seat the stick firmly but that didn't stop the continues beep. I then removed the cpu and put it back in booted the computer and heard only one beep which is a good sign. But how to my disappointment there is no signal visible on the monitor. I have now no idea whether the hard drive is the problem or the ram?
 

Answer:Continues Beep then no signal

I would check the CPU in installed correctly and re-check the Ram\also all Crds in thr PC like the Video card etc.
 

3 more replies
Relevance 56.17%

I tried to start my k450e, but there was no beep sound and no signal on my monitor. How can I fix this? I don't know what is the problem.... and should I visit the local warranty service providers??

Answer:No beep sound and No signal

Welcome to the Lenovo Community !
 
I am assuming that the computer is showing some signs of life such as the fan spinning or lights illuminated.  If there isn't then check your power source.  Try plugging the computer in a different wall socket.
 
If the problem still continues and you are not comfortable working inside your computer or your warranty is still active then I would recommend you contact Lenovo Support for additional assistance in getting your computer repaired or visit a local area Authorized Lenovo Repair Center.
 
Lenovo Support - USA1-877-453-668624 hours a day 7 days / week
 
 
Authorized Repair Center Locator.  Be sure enter in your City and check the box for Warranty Service Provider in order to get a listing of repair facilities.  Just use this link.........
 
http://bplocator.lenovo.com/

1 more replies
Relevance 56.17%

Expert advice needed. No signal to monitor, no lights on keyboard, no system beep at start-up.

The all fans are running: case fan, power supply fan, video card fan. I can hear the drives, the dvd writers lights are on and the trays open.
The monitor tests ok -- works with the laptop.

Removed the ram one by one and restarted.
Removed both stick of ram, restarted and got a sustained beep so the speaker is working.
Removed the battery and re-inserted it and restarted
Reset the cmos jumper to clear setting and set back to default
Replaced cmos battery
Unplugged each of the three hard drives, all of which are bootable.

Abit IP35 motherboard
Antec 500w power supply
Evga gforce 8600 video card

Suggestions?
Thanks
 

Answer:No Signal No Lights No Beep

First thing I would check is the video card, either try another card in the that computer or try the 8600 in another computer.

Welcome to the forums!
 

1 more replies
Relevance 56.17%

Hi,

a few weeks ago when i went to my friends lan paty my pc looked dead when I was finished attaching things and booting it up, there was no signal from the graphics card (both my ati radeon 9550 and onboard one). And there was no beep when starting the pc. Clearing cmos helped me out, my pc was running again. but when I came home i had exactely the same problem (AGAIN.. :evil: ). But again clearing cmos helped me out. Anyway last friday my dad took out my memory beacuse he wanted to buy mine so i could buy new (btw when he discovered the max. fsb he didnt want to buy them anymore)(ow and it are 2 256 mb sticks at 266 mHz). When i was booting up again i had the same problem again, but this time clearing cmos did not help me out. When booting up all fans start spinning and all drives work. I've tried another memory stick (my dad's new one, 512 mb and i had set the jumpers to 266 mHz once again) with no effect. I tried all possible combinations with placing my memory sticks).without graphics card and only the onboard one, it doesnt work either. :blackeye:

I'm getting kinda desparate as i'm really hoping it isnt my main board or cpu that has died. Ow, and about the cpu, i got a u-cop (shuts my sustem down when my cpu reaches 65 degrees celcius. This happened several times but should not have damaged my cpu as it should be capable of handeling much higher temperatures. I also bought a new case a few days ago, i've already placed all my stuff in ... Read more

Answer:No beep, no signal for the screen

Replace that CMOS battery...
Is this a MSI MBoard ? ?

patio.
 

5 more replies
Relevance 55.35%

OK, please make sure that any responses to this question are extremely dumbed down for the tech clueless...

My computer HP a450N powers on, but the light at the bottom of the tower front is orange (don't even know what color it usually is). No signal to monitor, and no lights to keyboard. I get a beeps-1 short, 6 short. I tried searching for what this means, but I cannot find it. Please help!!!
 

Answer:No signal to monitor, beep code?

Solved my problem!

Hey, I solved my own problem-bad keyboard (the 3rd one the kids went thru this year..grrr...)
 

3 more replies
Relevance 55.35%

Hello ,
If you did read the the title you may of found out that my computer looks to of turned on ( all fans spinning, gpu leds and fans on , External and Internal leds are on. But the monitor only reads no signal. I have tried swapping mointors i tried three diffrent ones as well i swapped my gpu out another 2 times to see if that was the problem, Well its wasn't.

My part list is
https://au.pcpartpicker.com/list/7KhbTH
as well as a 1000gb seagate sdd . I thinks thats right.

So the setup is completely new straight out of the box, i have never succesfully made it passed the no signal screen.

I have tried resetting the bios, as well as jump starting it those both failed .I tried cleaning the ram .

I have ran out of ideas but i do think the mother board is the problem as when i removed the ram and started the computer it did not beep.

Please someone help .

Thanks for your time Xavier Hay.
 

More replies
Relevance 55.35%

Hi im just after putting together my new pc but when i turned it on I get nothing, all fans turn on and the green LED on the motherboard is on. Although i get no beep when I get the no memory beep when all memory is removed. Also the first time i turned the pc on the monitor did recieve a signal but it was just a black screen. I then reset the bios and ever since the monitor shows "no signal"

The spec is:
580w hiper power supply
asus p5kr motherboard
intel e8400 cpu
4gb ddr2 corsair xms2
500gb seagate barracuda hard drive
gigabyte 1gb 4870

I have already tried the following

- Stripping it back to just stick of ram psu cpu and video card
- tryin 1 stick in each of the slots
- Resetting bios
- made sure 2 6 pin connectors were connected
- made sure 4 pin 12v was connected to motherboard
- tried video card in other pci express slot

None of these have worked the only thing i can think of now without coming to the conclusion that one of my components are dead is the the motherboard does not have the correct bios for 45nm processors.

So does anyone have any ideas on what else I could try as I'm completley out of ideas of my own

Also could someone tell me the likelyhood of it actually needing the bios to be updated and if something is dead whats the most likely component

I would try each component on another pc but i do not have another one and thought id ask you guys before trying to get a hold of one

Thanks for your help
 

Answer:new pc build, no video signal, no beep, help please

Very propably the BIOS issue. It needs the latest BIOS to support the E8400. Second in propability, your crap quality PSU is causing all this mischief. I would send it back and get a Corsair 400 W PSU, shouldn't cost much more. (40$ after MIR, free shipping at newegg.) Preferably get a bit higher, 550W model from Corsair, or OCZ StealthXtream 600W if you're low on money.
For the BIOS, get this and flash to the latest one: http://en.kioskea.net/guide/989288-intel-celeron-420-1-60-ghz-socket-775-800-mhz-bus
 

3 more replies
Relevance 55.35%

When I switched on my computer for the first time, nothing came up on the monitor... the fans were all working fine... but nothing else it seems... I just got a beep. What could be wrong??? HELP!!! >.<

Will switching the comp on to hear the beep again be bad for it??? Could this be a sign of shorting ect??

The 780i manual has nothing about trouble shooting this . The monitor is definetly turned on, the DVi cable is secured at both ends and I checked inside the GPU is getting power to it and is firmly seated. What am I missing .

Answer:Switched on Comp... Nothing but a beep

what is the beep? It beeps to tell you whats wrong, so figur out the beep pattern then google it.

2 more replies
Relevance 54.94%

Hi!

I have a computer that was working perfectly and after using compressed air it won't give a signal to the monitor, the keyboard doesn't light up (I'm assuming no power to the mouse either), and there is no beep when I start it. Internet cable lights up when I connect it, and the speakers make a "pop" noise like its receiving signal fromt the sound card. I tested the monitor, RAM, and graphics card on another computer and they seem fine...Fans are running okay and I removed the little circular battery from the mother board for half an hour to drain it, but still nothing.

Does this sound like a motherboard problem? I have a K9N platinum and if you suggest it is this, can you recommend a new motherboard (as this doesn't seem to be easy to come by anymore)? Hopefully its not the hard drive...

Thank you for checking this one out....and PS - baby steps are appreciated!
 

Answer:No monitor or keyboard signal, no beep on startup

Compressed air, not treated by difluoroethane gas or other static electricity preventative, is a very dangerous destroyer of computers... We have seen at least 12 computers destroyed by Compressed Air... one I did myself in my learning days...
Since then, we have run a lot of tests with canned air... All that are not treated are dangerous. All that come from a bench tank are just about guaranteed to destroy a computer system board, CPU, or other critical components...
And the static electricity can flow through several components before it finds a way to ground.
 

2 more replies
Relevance 54.94%

Please Help. My computer has lost it. It will power up, the hard drive spins up but does not complete boot process the processor fan spins but there is no beep and the monitor says Check Signal. I tried the hard drive in my other computer and it works fine.
Thanks for your response
 

Answer:Boot Problem, no beep, check signal

did you get a power surge or cut before this happened?? How old is the machine?
 

3 more replies
Relevance 54.94%

Please help!Recently I've had a few problems with my PC, namely PSU problems and general system instability. I've changed my PSU and reinstalled XP and have half solved my PC instability problem - I'm now only using just 2gigs of ram even though XP used to run perfectly with 4gigs of ram. This solution worked well until today because my new problem is now my PC just won't boot up - there is now no motherboard ready beep or video signal going into the monitor. The PC has power running through it (fans and cd drives are working) but there is no mb boot up sequence so XP can't even start up.I've tried swapping out the ram and reinserting the VGA card but that hasn't helped. I'm now wondering if my recent system problems have been a symptom of more serious problem, specifically a faulty motherboard.Thanks for reading, and thanks for any help.

Answer:PC not starting - no m.board beep no video signal

Looks like the PSU again, or its popped the Motherboard and or CPU. The old PSU may have damaged the mobo parts when it blew. But I would still try a new PSU first

10 more replies
Relevance 54.94%

It seems that almost (yes I said almost) everytime I reboot this computer, I never hear a post beep (yet everything works fine).

Everytime I power-on the computer, I get the post beep.

My old p3 always gave a post beep on every restart, yet this one will not. Is something wrong?

DFI nf4-DAGF mobo
AMD64 3200+
XFX Geforce 6600GT video

Latest BIOS for my mobo is already flashed.
 

Answer:not always getting a post beep

mine will post beep on start up also but not on restarts I think thats just normal.
 

4 more replies
Relevance 54.94%

My T61 will not post or beep.  Please help. I recently update T61 - 7659-12U with Middleton BIOS and T8300 CPU.  I also cleaned fan during the process.  Everything worked well for a few days but died completely without any warning. Turning power on without battery. the battery light will turn on momentarily and the AC power green light remains on.  No other signs of life (no other lights, no fan, no beeps, no disk movement).  I have tried pressing power button 10x and removing CMOS batter tricks. What do the experts recommend? As a last resort If I have to replace the motherboard, what should I look for? Thanks in advance. 













Solved!

Go to Solution.

Answer:T61 will not post or beep

If you remove the ram it should beep when you power on, if not, then it's most likely a bad system board.  Did you have any problems before you did the updates/repairs?





ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 8gb ram.

3 more replies
Relevance 54.94%
Question: NO POST Beep!!!

I just put together a Pentium 4 3.0ghz on an Intel D865PERL MoBo. But after I hook everything up, and push the power, the Mobo LED comes on, and all the fans are turning, but I don't get a POST. No beep, no error beeps, just complete silence. I barely know enough to get myself into trouble. If anyone has any suggestions, I will gladly try anything. Thanks.
 

Answer:NO POST Beep!!!

7 more replies
Relevance 54.94%

Hi, please help me with this, A friend of mine got a used system that was operating just fine, it is an older system heres the specs...

intel P4 (socket 423) 1.3 GHz
PcChips m920 board
512 Mb pc133 sdram
300 watt power supply
40 GB maxtor HD
Geforce 4 MX440 agp 4x card

ok heres the problem, he wanted to upgrade th evideo card, so we took the one out of anothe rputer he has, the card is a chaintech geforce fx 5200 256 mb agp card. Once it was installed, and we made sure it was seated properly and checked everything else, we tried to boot.....nothing, no beep codes or anything. The fans came on, the drives started up, but screen stayed black and no boot. So, just to double check we put the mx card in, and it booted. I know there is the AGP comp driving settings in BIOS, and it was set at auto. Do we maybe need to adjust that? And if so, to what? thanks in advance.
 

Answer:No post, no beep, no anything

Did you check for compatiblity on that new card .There are two different voltage rate for AGP 1.5 and 3. something I don't know your MB but if it is older it may not be compatible.
 

2 more replies
Relevance 54.94%
Question: No Post No Beep

I had a problem weeks ago where my video card would stop responding. ATI Driver tool can recover from this error. A week later after the initial problem occured, my motherboard wont post anymore it wont sound a beep neither. I tried swapping PSUs but didnt help either.

My question is, wont the motherboard post without a video card or with a broken video card? I dont want to buy a video card when my motherboard could be the actual problem
 

Answer:No Post No Beep

8 more replies
Relevance 54.94%
Question: No Post beep

  Well I reinstalled Win XP and it froze on installing your network. After fifteen minutes I did a hard boot. No post beep and the monitor states Monitor G, Check your signal cable or cpu. I switched the following to parts that I know work, all new, (video card, and mother board). Checked the monitor on another system. It is fine. Still the same thing. The system will turn on and I hear it counting, the hard drives are working and the CPU fan is working.  But, still no post beep and the monitor says the same thing. Now we are down to either the RAM or CPU and maybe power supply?  Or maybe a short in the case. Anyone have any ideas? This is baffeling. As I said, I hear it counting and hard drives spin and the CPU fan spins. But, it turns on just that to turn it off, you have to unplug it. CPU maybe or case or other ideas?Thanks,Don

Answer:No Post beep

is your video card well seated? i dont see how you can short the mobo from just a re-install... im not shure... "calls for raptor or merlin"

12 more replies
Relevance 54.94%
Question: no beep on post

i get no beep when i boot my computer.it has a syntax sv400 motherboard. everything works fine so why do i not get a beep. i have tried two different speakers.

Answer:no beep on post

Signal to case speaker disabled in BIOS?

1 more replies
Relevance 54.94%
Question: No beep after POST

There is no beep after successful POST. Everything is OK, just no beep.
The mobo is Gigabyte GA-7VT600-1394 with Award bios. I cannot see a speaker on the mobo but it is plugged in to the case speaker anyway.

Is this normal for this board?
 

More replies
Relevance 54.94%
Question: No Post Beep

No Post, No Beep. Bad MoBo?

after reading many threads about this subject i feel i should describe the problem i'm having, to know what my course of action should be.

i don't know for sure what was the cause of the malfunction but it started as system lock-ups and now the computer won't even power up. it seemed like video-card problems at first, because everything would freeze when i tryed to watch movies, and video problems could be noticed. yesterday after trying to deal with this video problem in lots of ways, i tryed to turn the computer on and nothing happened, no beeps and no post. when i push the power button the cpu fan and the psu fan rotate for half a second and then stop. i have to cut the power to the psu and reconnect it in order to try again. sometimes the power does go through but still no beep or post.

i tryed removing the cmos battery (all the removing done with power off in case you were wondering) and replacing it later, changing the jumpers to reset the bios (after doing those things i started getting more power ons than before), taking all out except what is absolutelly necessary, leaving only the cpu. tryed adding the ram, then tryed adding the video card... nothing works. i wonder if the video-card is needed for the POST BEEP to be heard. anyway, the main reason why i'm posting this is because i wanted to find out what is the defective piece here, as i suspect the mobo, the PSU, video-card or CPU (or RAM?).

it's impor... Read more

Answer:No Post Beep

Hello! Welcome to TechSpot!

Could we get the details of these componants?
A shot in the dark---it might be the MoBo.
Yes vid card is needed, unless you have onboard vid.
 

8 more replies
Relevance 54.94%
Question: One Beep on POST

My Dell Dimension 4100 emits a single beep during the POST on every boot-up. Dell Tech support site says it's a memory refresh failure, and to re-seat the memory modules. I've done this, as well as test each of the two modules separately, and have also inserted a third memory module. In all cases I still get the single beep on boot-up. (The PC hangs up regularly, doesn't always shut down properly, and sometimes hangs on startup.)

What else could be the cause of the beep, and how to fix it?

Mark
 

Answer:One Beep on POST

11 more replies
Relevance 54.94%
Question: No post, no beep

Hi all,

My first post....great place!

I got a friends comp coz he wanted me to format and do a fresh install. He had a bunch of programs that was conflicting with each other. Anyway when I got it I thought I would just try to uninstall some programs. Long story short it gave me a blue screen "stop error". When I tried to re-boot it doesn't post and it doesn't give me a beep. It just turns on for a few seconds and shuts off. Could the power supply be failing?

Any input is appreciated.

Thanks!
 

Answer:No post, no beep

14 more replies
Relevance 54.94%
Question: No Post Or Beep!!!

I recently upgraded my comp. More or less I just rebuilt it. The only thing that is the same is a 20 gig hardrive cd drive and floppy drive. I bought a brand new ati 9200 128 mb graphics card. I have a brand new atx case with 500 what pw supply. I have a amd athlon k7vta3 elitegroup mb that's brand new. A 1.6 gig processor also amd that came with the mb also brand new. I know for a fact that the card works cause I used it in my old sys for a couple days. My ram is ddr pc 2700 pin and i have 512 of it I've checked all the leds and everything is connect right I've gone over them a ton. Could it be the bios problem. Anyone have any solutions
 

Answer:No Post Or Beep!!!

Check the clear CMOS jumper isn't set to clear CMOS some motherboard manufacters set the jumper that way to save on battery life.
 

3 more replies
Relevance 54.94%
Question: NO POST BEEP

Hello.I have been reading with interest some of the causes of a PC to fail to boot into windows, when the usual single POST BEEP is missing.I have this problem, but what i cannot understand is why switching off the PC by holding in the silver button for a few seconds, then switching off the rocker switch on the back of the PC, leaving for a few seconds, and switching back on cures the problem every time - i.e the computer then boots into windows succesfully.I am not sure whether to just keep performing this action or to look at the cause( maybe a memory problem ). As yet i have not run a memory test programme.My PC is a Microland Tech CB150 - Running Windows XPMany ThanksPaul

Answer:NO POST BEEP

try doing a C drive check.Go to my computerRight click Local Disk (or what ever you've called)choose the 'Tools' tab.then error-checking and check now.Restart your computer, and it will be done. May take some time thou so be patient   

3 more replies
Relevance 54.94%
Question: help! no post beep

i've assembled a pc which will not start. it came as a case/mobo/cpu/fan/memory fully assembled. i've added a hdd and 2 optical drives and a floppy drive. when i power up the fan spins and the power light is on and the hdd light flashes. on the screen the memory count is shown and the drives are detected. there is no post beep and when i press del to enter setup nothing happens. it is a good keyboard. i have tried clearing cmos by resetting the clear cmos jumper and tried swapping memory sticks with known good memory to no avail i just cannot get into cmos or any further than the screen which shows that the drives have been detected. can anyone help, please.

Answer:help! no post beep

No post beep!case speaker connected?However if it gets to POST screen where drives are detected then motherboard cpu psu memory are ok.Next it should access operating system from either CD floppy or HDD, depending on how set up in BIOS.There will be an message to tell you which keys to press to enter "setup" something like del esc F10 etc.If your HDD is from an old system has it got an op system installed?If so then the drivers for the old boards will conflict with the new.Either:no op system then boot from CD or floppy and install windowsold op system boot from CD or floppy and format drive and install new op system.

6 more replies
Relevance 54.94%
Question: No POST beep

My son put the PC on. It smelt of smoke so he put it off.Later I put it on, no smell but no display. CPU fan spins, RAM LED on motherboard comes on, CD drive lights flashes, hard disk light on front of case comes on. But no display and no POST beep.1. Replaced the graphics card with one from a working PC, same result, no dispaly, no POST beep. Put graphics card back and other PC still works.2. Replaced the PSU with one from an identical working PC, same result, no display, no POST beep. Put PSU back and other PC still works.3. Checked the with another untested monitor, same result.4. Ran test on original monitor result 'test good' signal rec'd.5. Decided that something on the motherboard or CPU had gone awol so this evening replaced both with brand new items.6. Put PC back together with the known working PSU (just in case the original had been the initial problem) from the other PC, and guess what, no display, no POST beep.With no POST beep and no dispaly I don't know where to go next.Anyone any ideas?

Answer:No POST beep

Try stripping it down to a skeleton system out of the case (on the bench) with just motherboard, CPU, heatsink, fan, one RAM module, graphics card, hard drive and PSU. See if you can get a display, Ollyolly.

10 more replies
Relevance 54.94%
Question: No Post Beep

My computer turns on, but I get no Post Beeps nor does it display anything on the screens, plz help.

Answer:No Post Beep

I had the same problem with my first build. After reading the owners manual for the motherboard i figured out the mobo was shorting out to the case. I took the mobo with the vid card, cpu and fan installed out of the case, and set it on a wooden desk and powered it up. After getting a new case and reinstalling all the hardware everything worked fine.

7 more replies
Relevance 54.94%
Question: post beep

system specs syntax sv 400 motherboard g force 4 64 meg graphics , amd athlon 2200 chip 512 mb pc 2700 ddr ram ,80 gig ibm hard drive, just built this system , all is working fine but does not beep on startup , tried speaker connection both ways still no beep, although this is not a problem in itself i just wondered if any of you had came across this problem before and if so what is the cure

Answer:post beep

If the PC is starting normally apart from no POST beep then the POST has not been enabled in the BIOS.

2 more replies
Relevance 54.94%

Hey guys, good forum you have here, i'm learning a lot.

Normally i can fix a broken pc but this one im puzzled with.

I have a Pentium 3, slot 1 Xblade computer with an Intel M/B which will not display a bios screen or beep. Sorry I can't give more detail, the pc is not mine.

I've rejigged the memory, took out all pci cards, tried another agp card, tried another monitor, removed all IDE's, tried another PSU, renewed the cmos, and then the final step was I replaced the whole motherboard using paper washers just in case it was shorting.

Still the same result, as soon as I plug in the PC, it starts on its own accord and alls I get is the red HD activity light on permanent. All the fans and PSU spin as normal, just no Display whatsoever.

The only thing I can think of is dead processor (rare) or faulty case.

Any ideas or suggestions please?
 

Answer:Help, No post, no beep

13 more replies
Relevance 54.53%

Hi All,

I bought my computer about 2 years ago from IBUYPOWER. Never had any issues. Will post specs after the story. So i used to have a GTX 580 but upgraded to a single 680. Then this past weekend i received a second 680(exact same). I was trying to get the hardware in but was having some issues fitting it for some reason. I had to get up and leave for a minute but wanted to make sure i didnt screw anything up (hardware was still not installed). Before i left it i turned my PC on and it was fine. Came back to finish up and managed to fit it and plug in the power cables as well. When i turned my computer on nothing happened. It seems one of the fans tried to turn on but it just stopped immediatly. No beeps nothing except for 2 leds that turned on and stay on as long as its powered up.

So far what i tried to do is just make sure all my wires are in correctly... however everything seems to be in place and nothing seemed to have moved... I am unsure what is causing this.

My specs are:
HAF 932 case
12gb corsair ram
1000 watt PSU coolermaster rated bronze
currently installed GTX 680 from EVGA 4gb FTW
I7 980
MOBO guerilla G1(the leds showing up are the ones right below the ram sticks)

I do not have much build experience but i do no this computer has worked flawlessly prior to this.
If any more detail is needed please let me know.

Thanks!
 

Answer:Comp tries to turn on. No beep. MOBO LED on

Was the computer unplugged from the wall before installing this new card?

What happens if you uninstall the new card?
 

5 more replies
Relevance 54.53%

Hi to all, I have an IBM Aptiva E series 276, which has the AMD K-6 2, and the mother board is an Acer V75M. We have had this comp for at least 4-5 years, bought it brand new. I never noticed before because it is wifes comp, but was on it the other day, and upon startup, no beep code. Asked wife, and she said it has never made a beep on startup. I went to a beep code site for IBM, and it said no beep = power supply. Question is it`s been like this since new, and it is still running, if there is a power supply problem, why is it still running? Was wondering if anyone has run into anything like this before. I mean I hate to replace the power supply, since the comp is still working like it always has. Any ideas appreciated.

Regards
Peters321
 

Answer:no beep code, but comp runs

7 more replies
Relevance 54.53%

Configuration:
I have the following hooked up
ASUS P4800 SE
3.2 GHz Intel P4
Videocard (that works on another computer)
512 MB RAM DDR400

Problem:
Nothing happens, nothing beeps at start up, there is nothing on the monitor and I have no clue what's happening. When I turn it on, I see the spinning of fans (heatsink & video card). Yes I am sure everything is hooked up correctly. I suspect the motherboard is malfunctioning, but from my experiences, ASUS are superb performers. Any suggestions?

Answer:Nothing at startup, blank, no beep (new comp)

Well you didn't list you Hard drive!

3 more replies
Relevance 54.53%

I understand that this means there is a system board error.  I have a very good reason to believe that the BIOS had an issue (when I checked it before this happened, it had 75 boot options listed and said the volitale memory was almost full). Question: can I somehow force the BIOS to reset itself?  Is there a pin short I can use for this? Of course I am 2 weeks out of warranty :/  I assume if I sent it in they would just charge for a boarsd swap... likely $500-$600 dollars. Thanks for any help!

Answer:X230 1 beep, 3 beep, 3 beep, 1 beep, no screen: can I reset the BIOS?

1-3-3-1 means no memory. If you have 2 DIMMs, try with just one, then just the other. When you try with just one DIMM, it needs to go into slot-0. When you have the machine sitting lid-down and the battery compartment away from you, slot-0 is the one on the right.

9 more replies
Relevance 54.53%

Merry Christmas...

PC froze, Ctrl+Alt+Delete wasn't working, waited 30 minutes so I disconnected the power cord (on/off didn't work).

It now fails to boot. Turn it on, fans whirring, hard drive spinning, but no beep. Monitor displays 'no signal' (tried a different monitor). A couple days before it got to this stage, it gave me an blue screen (unexpected_kernel_mode_trap), but booted fine after that, not sure if related.

Keyboard and mouse both wired, both unresponsive (though they do power on).

Any questions, I'll try to answer as best I can.

Regards, HP.
 

Answer:Desktop fails to boot, 'no signal' from monitor, no beep

Just for future reference when your computer won't shutdown it is best to press and hold the power button for 6-10 seconds until it powers off.

Since the monitor is displaying the no signal message that means it is working. Your video card or video port is not sending a picture. I think I would reset CMOS and see if it makes a difference. Unplug from AC and remove the coin shaped battery for a minute. Then put battery back, plug in and try to boot. See if it makes any difference.
 

8 more replies
Relevance 54.53%

Computer Starts-Up But Signal Led Are Not Working,No Beep Plays When I Turn On PC,Monitor Says No Signel Sometimes Monitor Says Cable Not Connected,CPU & SMPS Fan Are Working But GPU Fan Are Not Working And Also Mouse Light Works But Keyboard Led Not Works And There Is No Light Working In Inside The Cabinet And I Also Put Monitor Cable Into VGA Port But No Success Please Help Me My specs: Windows 8.1 32bit CPU: Inter Core2Deo Gpu:2 GB DDR3 Nvidia Geforce GT610 Ram:4 GB DDR3 Motherboard: American Megatrends

Answer:Computer Starts-Up But Signal Led Are Not Working,No Beep Plays

So you turn it on and hear fans but other than that nothing else happens?If this is the case try reseating RAM first with power off.if this doesnt fix it then replace the power supply with a known good power supply.

2 more replies
Relevance 54.53%

A couple of weeks ago the fan on my graphics card stopped working, it was buzzing a lot and periodically slowing down. I bought a new heatsink for the card, an Arctic Cooling Accelero L2. I installed everything on the card correctly and carefully. Now when I put the graphics card back on the mobo, the red light (the one ON the actual card, not on the mobo) is lit up and my monitor stays black.

The GPU itself worked perfectly fine (even if the fan wasn't working) before I installed this new cooler. I wouldn't use it much while the fan was breaking down so that it wouldn't overheat.

There IS a POST beep on power-up. Just a normal single beep. It recognizes there is a graphics card in my PCI-E slot but the card itself has a red light on it now. I tried swapping different SATA cables, even tried connecting the card to a molex instead. It just won't respond.

The fan on the new heatsink spins fine, however I have the fan connected only to molex power (it comes with a molex cable for direct-to-PSU use in case the fan connector doesn't fit the header, which in this case, it definitely wouldn't). I don't know whether or not that's an issue.

Now prior to all of this happening I had just contracted the Trojan virus Sirefef/ZeroAccess. I don't know if that would affect graphics card power settings.

GPU: Sapphire ATI Radeon HD5770 PCI-E 2.1

Answer:BIOS beep, PC posts, but red LED light on GPU and no monitor signal

Think you answered your own question,






Quote:
The fan on the new heatsink spins fine, however I have the fan connected only to molex power (it comes with a molex cable for direct-to-PSU use in case the fan connector doesn't fit the header, which in this case, it definitely wouldn't). I don't know whether or not that's an issue.


Pretty sure the card won't initialize if there isn't a fan connected to the fan header. Are you sure that the connector from the fan won't fit on the card? From what I can see it has either a 3 or 4 pin connector (or both depending on which model it is) that should fit on the fan header on the card.

9 more replies
Relevance 54.12%

I've got a friends old p4 here to work on.. but it needs a little more expertiese than I can donate.

With everyting in the computer.. It won't post.. The hard drive light flashes, but the monitor never cuts on. It's not giving error beeps either. When it starts, it just sits there. First thoughts were the video card.. then ram.. I've swapped vid cards.. I've taken both sticks of ram out and tried them individually. With the ram out.. it actually gives an error beep. (3 long beeps to be specific) Thats the only way I can get the bios to give a sign that it's trying. It doesn't beep with the vid card out. (possibly because it does have onboard.. even if it's disabled..) I tried the onboard video.. still nothing.

Any other ideas short of starting over with a new motherboard and processor? My friend is a bit strapped for cash so I'm already trying to save him some money. $200 isn't part of the fix atm.


Thanks..
 

Answer:Won't post but will beep if ram is removed

The RAM could be preventing the system from booting tho It should beep if it's bad.

So the PC doens't beep when the ram in but beeps with the ram out? Everything else in the system for it to beep just ram missing?
 

7 more replies
Relevance 54.12%

Hello!
I have the following:
Athlon 2700+ XP
Biostar M7nCD Pro mainboard
512MB RAM DIMMs PC2700 (I believe) x2 (two sticks) (Kingston and Crucial)
Two WD HDDs (250GB each)
Sony DVD+/-R DL burner
WinXP Professional
450w PSU
GeForce 4400ti vid card

I usually leave my PC on for long lengths of time (2-4 weeks at a time), and last night I awoke to my PC making long beeping noises, so when I got up and checked on it it acted like it was shutdown (no lights on case, and monitor light was amber/yellow), but the beeps were still going on... so I shut down the power going to the case and went back to bed. Later today when I got home from work I flipped on my PC and before the monitor even popped on I heard the beep again.. so I waited .. another beep... and no POST... and the beeping continued... (long beep over and over)

So I yanked my master HDD (along with my burner and my video card) out of it and put it into my wife's PC (where I am now), so I could come and ask you all what you thought it was, but before running straight here I stopped by Biostar's site and various other motherboard sites to see what the beeping could mean.
I read that a series of siren-like beeps (hi/low beeps) meant there was something wrong with my heatsink/CPU, and a long beep over and over means that RAM is bad (I guess that is what I read), so here is what I did...

For good measure: I first removed the CMOS jumper from 1-2 and put it on 2-3 for 5 seconds (Biostar said... Read more

Answer:PC wont POST... will just sit there and beep.

to start out, its not the PSU. A dead PSU will give you nothing at all, at least in my experience.

You're correct in thinking that 5 seconds is short to clear CMOS, i usually put the jumper in clear position and remove the battery for at least 30 seconds-- but it seems you've tried that too.

Have you tried with only 1 stick of RAM (alternate, in case one is the culprit)? Can you get your hands on another stick of DDR RAM that will fit just for testing purposes?

I wouldnt imagine it was a fried CPU, though you might want to pull the heatsink off to check.

Lets keep troubleshooting so we can try to fix this, but keep in mind that Biostar has not had a great name for a number of years now, and I have heard quite a few stories of their Motherboards crappin out.
 

13 more replies
Relevance 54.12%

I went and ate dinner my rig was working fine, when I came back I had no display.

GIGABYTE GA 990FXA Motherboard
AMD FX 6350 Processor
SAMSUNG 840 EVO SSD
GFORCE GT 740 Graphics Card
GSKILL Sniper RAM (2 sticks)
THERMALTAKE SMART650W Power Supply (new)

I Tested Video card in another PC, replaced power supply and tested SSD, Still no display. It powers up and stays running. There is no embedded speaker on the Motherboard. I guess that leaves the processor or MB?
I sent the MOBO in for repair, received it yesterday and reinstalled. I am bread-boxing and still no video.
I installed an internal speaker. No post beeps unless both sticks of RAM are out; then I get continuous short beeps. So far new power supply and MOBO. I tried posting with no peripherals. My computer starts, the PS fans run, the heat sink fan on CPU runs... Is there a way to test the CPU?
I took a stick of RAM from another PC, same results

Answer:No Post Beep, No Video

so when you have all RAM out, you get post beep but with RAM in, no beep at all?

Do you have onboard VGA connector you can try?

You sent in the mobo, but did they do anything to it at all?

If you are able, reseat the CPU. Not sure there's any other way to test it other than to swap processors or test your processor on another PC.

6 more replies
Relevance 54.12%

HiI often get continuous 5sec beeps seperated by 2/3 secs on powering up. This continues until the power is turned off by pressing power button for 5secs or using on/off switch (haven't let it continue for more than 20secs). Upon powering up next time it usually starts up OK.The pc often stalls/freezes (usually while using Internet Explorer/Outlook Express but can be restarted using RESET button.System (built locally by firm no longer around!!) described by Belarc Advisor as OS XP Home (SP2)CPU 2.55GhZ Intel CeleronMOBO RC410SB400 (MSI/PCI Express??)HDD SATA HDS728080PLA380RAM Infineon 512mb SDRAMBIOS Phoenix Technologies LTD 6.00 PG 09/23/2005Have looked on forum/WEB with little success as I have so little info on system components. Any advise/help/links would be much appreciated.ThanksGSCULP

Answer:beep on POST/freezing

Here are some links that explain what the beeps mean, you may need to scroll down the page as they cover different BIOS types. Hope its of some use for you. Fatboyslimclick hereclick hereclick here

6 more replies
Relevance 54.12%

Well my main computer quit today. It's an MSI K7N2 Delta 2 platinum with an EVGA GEForce 7800GS card. Athlon 3200+ XP CPU.

It won't POST. No video at all.
I keep getting a long Beep on boot up - I have removed / reseated memory sticks, reseated the graphics card, reset the CMOS (by pulling the jumper).

The manual doesn't describe the DLINK beep code of just 1 long beep. The closest it says is 1 long beep followed by short beeps. I'm not getting short beeps.

I'm getting power, but no video at all.

Basically I need to know if my video card or PSU has failed and what the DLINK error beep is. I have a generic 600W PSU and the system has run for at least 2 years straight - 24/7

I got some beeps the other day when playing a game, but the beeps went away. I have a bad feeling the video card quit on me. Any ideas? I'm thinking PSU might not be giving enough juice now that it's old.
 

Answer:NO POST - with DLINK beep

Hi Tedster.

Sorry to hear you`re having major problems.

I`m not sure what you mean by a DLINK beep.

My first guess would be either a bad psu/bad mobo.

Disconnect anything not required to boot your system and see what happens.

Regards Howard
 

24 more replies
Relevance 54.12%

My wife has a T1600 eMachine, Athlon processor. It powers up, the indicator light comes on yellow, the fans work but nothing else. No POST beep, nothing on the monitor at all. Any ideas on where to start?
 

Answer:No POST Beep, No display, HELP!!!

15 more replies
Relevance 54.12%

OK , no post, no beep, no boot, no clue. I have a hp dc5100 desktop pc. Intel inside 3.2Ghz , 1gig ram, all factor except some upgrade on the ram by a tech quite some time ago. I left my pc on overnight as usuall, next morning nothing on the monitor. I left it on with screensaver, not in hibernation or sleep mode. No response. so I rebooted and nothing, except the following, power light came on with fans , cd led blinks etc, but no video no post, no boot?.

I tried all the troubleshooting guidlines i know and such listed on HPs' site. Ram is good, monitor is good. with all perifials disconected. Mainboard led is on.I tried an external video card. I tried clearing the cmos. made sure connections and cables are good. cpu cooler is warm to touch. video chip warm to touch. I completley disconected all power cables, pulled cmos battery,pulled all jumpers and used the cmos reset button on the mainboard, in various sequences. restored all to original state and still... Pwer up renders no video, no post or beep sequence. P.S. when i try bootup with no ram i do get beeps for memory fault so speaker is working. I havn't come across this before as I usually run AMD on an ASUS mainboard and I'm not familiar with HP. Any suggestions of what i may have missed are gretly appreciated thank you.
 

Answer:no video no post no beep

1st thing is to try a different/new power supply
 

2 more replies
Relevance 54.12%

Ok I have 2 issues that are, I believe, related.
1) When booting the computer the bios stops and gives a never ending stream of short
beeps. I entered the Bios to aid my diagnostics and seeing no issues I exited without
changing any settings. Computer booted normally.

2) Once Windows had booted there was another issue. booting was taking forever and I
quickly found that any processes that started would replicate itself. The programs
would continue replication till the computer's memory overflowed and crashed the
system.

I am leading toward the MB or attached sub system. but since I have never run into this issue before I figured I would ask here and see if I can learn from someone's experience with this issue.Any help is appreciated.
Thank you for your time.

Answer:Post beep weirdness

Sounds like a memory error. Download Memtest86+ - Advanced Memory Diagnostic Tool

4 more replies
Relevance 54.12%

A couple of days ago, my PC started to restart during the boot-up sequence. The lights flash on the HDD and CD and DVD and then the machine restarts again several times before getting to the POST beep. Once the POST beep has sounded then Windows XP loads as usual.I have checked the connections inside and outside the PC but have not reseated any cards or cables yet. Does this restarting point to a specific component failing? Any help would be great! ThanksPC: OS Win XP Home Sp1. CPU:AMD Athlon XP 3000 2.2GHz. Memory : 1GB = 2 modules of 512MB DDR333 PC2700 RAMMotherboard: Asus Motherboard Socket A Model A7N8X2.0 DeluxeC drive: 120 GB Maxtor 7200rpm 8MB cache IDE ATA133 Slave drive 300 GB Seagate Baracuda 7200rpm 8MB cache IDE ATA100Pioneer DVD CD-Rewriter DVDSony Combi 48x24x48 +16x DVD

Answer:Restarting before POST beep

I suspect that as this is happening before anything gets properly loaded that it's something connected with the power supply unit not kicking in properly.

6 more replies
Relevance 54.12%

Hi again,

Fixed the old problem of the computer rebooting.. I just gave up and awaited a new CPU through the post.

Fitted the new CPU, now when I boot it up I'm not getting any POST beeps or display through monitor.

I've read topics around tinternet and everybody says it's mobo or CPU.

The mobo is less than a month old, and the CPU came two days ago.. I'm pretty confident that it is neither of them (if it turns out to be.. I won't be surprised though)

I've ran a basic boot with only mobo, CPU and HDD's attached.. same problem

Checked the pins on the processor and in the CPU slot, all seem pretty good. All wires that are supposed to be connected are connected so can't see a problem there.

I also disassembled and rebuilt the PC while it was completely unplugged on the floor, so don't think I shorted anything...


Please somebody help


Computer Spec:

Intel Core 2 Quad 2.5 Ghz
Corsair Vengeance 8Gb DDR3 RAM (2x4Gb)
Asus DDR3 Mobo
XFX Radeon HD 5450 1024Mb
Windows 7 Ultimate

Answer:New problem - Not getting a POST beep

I've also tried refitting the old CPU which I know worked and still not getting a POST beep at all

9 more replies
Relevance 54.12%

I posted this elsewhere and have since discovered that place was inappropriate; sorry.

Fixing an old machine, p3 phoenix bois, and it boots with a single beep, and seems fine until it initialises the keyboard. What transpires i can only describe as an angry successive beeping that develops into a seemingly continuous beep. The background is bizare, at least as far as i understand it, a client brought in 2 machines, the first had swolen caps on the board, which we replaced, and ran successfully for some time. However, the keyboard began to stutter with beeps after post and after re aligning the pins also worked fine. Subsequently, the client brought the first back, the keyboard had begun beeping again, only with more intensity and irregularity, simmilar to a stuck key but more erratic. I sent the client away with a new keyboard and success. However, the client returned again, reporting that the beeps had begun again 4 or 5 days later. Again I replaced the keyboard with, and no beeps. Subsequently the client brought in a second machine reporting that the first had persisted with its beeping issue, and that he had chosen to use another machine at his disposal. As it turns out the second computer had the same issue, solved at least initially with the replacement of the keyboard. The problem still persists however, and seems to have gradually worsend over time. In both cases the same original keyboard may have been used by the client, in the case of the first machine the keyboa... Read more

Answer:Continuous Beep After Post

You sure this client isn't messing with you and has somehow caused this? Are there any *.bat files or something similar that have some code in them to cause this? I guess last but not least, is this an error code that the bios is throwing you due to heat problems or something of the sort.

Just seems a little suspicious.
 

9 more replies
Relevance 54.12%
Question: No Post beep/video

I just purchased a new setup:
* Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920
* CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Triple Channel Kit Desktop Memory Model TR3X6G1600C9
* Western Digital Caviar Blue WD2500AAJS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive
* ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard
* EVGA 896-P3-1255-AR GeForce GTX 260 Core 216 896MB 448-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card
* CORSAIR CMPSU-750TX 750W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power

I put everything together, hit the power button...... no beep or video. I don't have my CD drive hooked up, put only 1 stick of memory in. made sure all connectors are pushed in firmly. whats going to be my first step of diagnosis. I can hear my HD click once if that helps. All fans are running(psu/video card/hsf/case fans)
 

Answer:No Post beep/video

Got it to post correctly with 1 beep, now the screen is garbled and pixelated. One message that I happened to catch was something about Express Gate.. Anyone have information about that? I can only see the begining splash screen that says ASUS P6T Deluxe V2, after that initial screen, you cant make out much of anything... yikes!
 

2 more replies
Relevance 54.12%

hi, im looking at a pc for a friend its a CCTV video server and so has raid drives and bnc cards, apart form that it looks fairly normal. however he brought it over because he cant get any display on it. The machine switches on and all fans are running cpu and PSU are running, but theres no system beep. Ive removed everything so its just the barebones but theres still nothing. Im all out of ideas and tests to run help Please !!!
 

Answer:No Screen no post Beep

16 more replies
Relevance 54.12%

I went out today and came back and my PC was stuck at the "Last known good configuration screen". I tried to boot into windows using that setting and nothing happened, my PC Just restarted and the cycle began back to that screen again.

I restarted, POST gave me no errors but i was still unable to get into windows, I put my disk in and attempted to repair my installation and once again it wouldn't load, I got to loading necessary files etc (With the bar at the bottom) then the PC restart after that..

I'm thinking it could be a hard drive issue, I've got a spare old hdd i can try, but before i pull apart my PC i thought id ask here.

Answer:PC Won't boot, POST beep is OK!

Follow it:
Troubleshooting Windows 7 Failure to Start

Or, run Startup Repair for three separate times, with restarts after every single run.
Startup Repair: Run three separate times.

5 more replies
Relevance 54.12%
Question: Weird POST beep

I am using the Award/Phoenix v6.0 BIOS for my Epox 9NPLA-SLI mobo, and it just started giving me one long beep and that's as far as it gets. I've checked out the POST code beeps, but they don't say anything about one long (approx. 2 seconds) beep. Anybody have any ideas?
 

Answer:Weird POST beep

6 more replies
Relevance 54.12%
Question: Post beep code

Can anyone tell me what 3 beeps mean, my board is Intel D945 GCCR. My computer beeps 3 times and then just won't start up and also that this beep thing doesn't always happen, it happens sometimes and other times the system will boot quite normally.
 

Answer:Post beep code

7 more replies
Relevance 54.12%

Good Morning All, I have a T61 7662-CTO with 4GB RAM, 100GB HDD, Vista Ultimate x64, NVIDIA Quadro 128mb. At POST I'm receiving a beep code, one long, two short beeps. After a very unproductive call with IBM/Lenovo support I was advised to run the PC Doctor diagnositic tool which says that my memory, video card and mainboard is fine. Two months ago the mainboard was replaced, and the system has been working fine. This issue started on Tuesday and the first time it occured a BSOD appeared upon login, and unfortunately I wasn't able to take the error in enough time before the memory dump. Any thoughts on this issue would be greatly appreciated. Thank you,













Solved!

Go to Solution.

Answer:T61 Beep Codes at POST

1 long, 2 short is an error with the video adapter.  This isn't specific to IBM systems either, that code is the same for pretty much every BIOS out there. If you let the memory dump finish you can probably still find it on the system and analize it now.  If your settings are for a full dump it can be found in %WINDIR%\Memory.dmp and a partial dump would be found in %WINDIR%\Minidump\%DATE%.dmp.

3 more replies
Relevance 54.12%

Hi everyone,I have a problem with four identical pc's approximately 2 years old at work. Pentium 4, celeron 2.2, Bio-star U8668-D motherboard with 256 mb ram. When the pc is powered on all fans come on but get no beeb from computer. I checked all the connections, disconnected cd rom, floppy, hard disc etc. to no avail. I cleared cmos using jumper and managed to get pc to start. If left for a few minutes, it is a hit and miss affair for the pc to start. I have tried to replace cmos battery CR2032 but it has not made any difference. If I try to start, I may have to make 5/6 attempts before I get the beep and post etc.Does anyone here have any suggestions.

Answer:PC does not boot - no beep, no post

I'm surprised that you have identical problems with all PC's. Sounds a bit like a power supply issue... If all your computers are acting in the same manner then is the mains electrical supply up to the job, have you added any other electrical equipment to the office electrical circuities?You could try turning off any piece of equipment that is using the mains supply and then with just one computer switched on, see if you can get this up and running if you can I would consider calling a electrician in to sort out the mains supply.I have in my time overloaded my mains electrical supply (a bungalow that was built in the early 60's so electrics wasn't up to ruining electrical goods of the 90's)turned the tumble dryer on, and blow SWEBS fuse and not my fuse box... Had to have SWEB come out and replace there fuse to get everything up and ruining again...

8 more replies
Relevance 54.12%

Greetings!My computer doesn't work:-There is no BIOS beep, no post, and no video on screen-Power supply runs, so does HDD and CPU fan.-No visible signs of fried elements on motherboard.I've already tried:-Clearing CMOS via switching position of CMOS jumper and via removing the battery. I've also waited for an extended period of time before placing the battery back and before placing jumper on normal pins.-Removing video card-Removing the RAMs (just the first piece, then just the other, then both - triggering the long BIOS beep)Specs:Acer Aspire M1920CPU: Intel Pentium E6700Video: GeForce 405RAM: 2GB Hynix 1333mHz + 2GB Kingston 1333mHzHDD: Seagate 7200.12 500GBPower: FSP Group ATX-250PA 1PF 250WattDVD: HL-DT GH70NMotherboard: G41T-AMOS:Win7 64bitThe problem appeared after force shutdown of computer via pressing power switch for 5 seconds.

Answer:No video, no beep, no POST

Quote-Removing the RAMs (just the first piece, then just the other, then both - triggering the long BIOS beep)I think the beep has to be initiated by the CPU.  So the CPU is  alive.Go get some RAM. Maybe both are dead.

5 more replies
Relevance 54.12%

I recently upgraded my PC case and replaced a DVD-RW, and now on boot-up I am coming-up with a POST beep (at least I assume it is) that I can't find in the list provided by this site. Aside of the new DVD-RW, all of my hardware remains exactly the same.The beep is continuously alternating between a low and high tone, and both tones occur for the same period of time. The strange thing is that despite this beep, my PC appears to function normally and boots/lets me log into Windows XP just fine. After being on for approximately four minutes, the PC shuts itself off.I have isolated the MoBo from my hard drives and DVD drives and the issue still continues. Since it does boot normally, and seems to fail as Windows is finishing its boot process while my RAM is being sucked-up with all of the programs that initialize during start-up, could this be a RAM issue?I am using a Phoenix BIOS.Thanks for your help in advance.

Answer:POST beep I can't decipher

You probably didn't configure the Master/Slave jumper settings since you didn't mention any of that.

14 more replies
Relevance 54.12%

I am trying to build a new system using my athlon mp-1200 or duron-1200 both are basically new and unused. I have tryed both on 3 boards (actually 6 all to geather) which I can not get to post or make any sound or send a signal to the monitor. These boards are uninstalled. I am using a power supply with Output: [email protected], [email protected], [email protected], [email protected], [email protected], [email protected] from what I have read this is more than enough. The heatsink fan comes on, starts to pol the hardware-keyboard flashes then nothing. I have tryed 1 stick of memory (Kingston DDR 2700) changed slots and with no memory still nothing, no sound. The Athlon MP gets warm as do the chipsets. For wiring I have only a speaker (tryed 3 dif) and an on/off switch. I have built many other AMD systems, however none with an Athlon MP processor. The motherboard I bought to go with the Athlon mp-1200 is a Biostar M7VIZ which states "support for Paliminos" I can not believe none of these boards will post but they do not. Any ideas?

Answer:will not post - no beep sounds

could try reseating the vid card and also check the processor for any bent pins and then reseat it.

3 more replies
Relevance 54.12%

My memory isn't what it should be! Repeated attempts to increase it fail. The latest when booting I get 1 long post beep (repeated). I've looked at various documents, that go on about error codes, but cant find what it means. Does anyone know or can link me to a site that's inteligable? BIOS is Phonex ver 6.00pg. I similarly just put in a AGP graphics card & got the same (without doing RAM at the same time). Any advice welcome. Incidentaly it runs XP with 512mb ram in either slot, I've another 512mb to install - it wont boot with that in either slot on its own, or either combination with the existing memory. Yet a friends Pc same mobo works fine with it!

Answer:Post beep confusion.

click here

7 more replies
Relevance 54.12%

Recently moved, and just before I moved I'm not exactly sure what happened but the electrics (but not the lights) in the house cut out, until housemate did something at the fusebox, so either may have damaged something.

I've reseated RAM and video card, reset CMOS battery and checked cables. Fans and lights come on, if I take RAM out I hear long beeps during POST but still no boot.

Any help appreciated

Answer:no POST beep when booting

Clear the CMOS (using both methods as described below) if you have a power shutdown, that might help you get going.Turn OFF the computer and unplug the power cord.

Hit the ON button (power button) on the case to remove any residual power.

Remove the onboard motherboard battery.

Move the Jumper Cap from pins 1 & 2 (default) to pins 2 & 3. Keep the cap on pins 2 & 3 for ten seconds, then move the cap back to pins 1 & 2.

Reinstall the Battery.

Plug in the power cord and turn on the computer.

Hold down the DEL key and enter the bios setup menu to re-enter data.
Notes: Some motherboards use different key combinations to enter the bios setup menu.

There are also some motherboards that you can simply push a button to achieve the same as moving the jumper from pins 1 & 2 to pins 2 & 3 and then moving the jumper back.

In addition, there are some boards that you simply use a screwdriver to short across the two jumper pins (no jumper), but this serves the same a removing the jumper and replacing it to adjacent pins.

6 more replies
Relevance 54.12%

My other topic went unnoticed but I've managed to downsize the problem a bit in the meantime.

Issue: No POST beep thus no display on monitor

How it happened: Computer's been fine for months - pulled out video card - dusted off all fans - put it back in - no POST beep.

What I've tried:
Reattaching the video card several times and cleaned for dust on and around socket/card. Reseating RAM and booting with each chip.
Cleared CMOS (I think, ~30 seconds on CLR RTC (should it be a full minute?))
Making sure that all cables are properly connected (they should be as I didn't detach any internal ones initially)

Any ideas?
 

Answer:Solved: No POST beep

7 more replies
Relevance 54.12%
Question: No Bios Post Beep

I am really flustered The other day mouse and keyboard got disconnected. Reconnected and restart comp. Nothing boots to a Intel screen no beeps, fans and lights all working. Tried different hd same checked all connections, changes hd cable. now ready to beat comp. :unch: I don't want to randomly start replacing. Anyone every run across this situation? Could you plz point me in the right direction.
 

Answer:No Bios Post Beep

You probably toasted the motherboard. Nice pink font... You must be a nice woman
 

4 more replies
Relevance 54.12%

Let me start off here... XP Pro, 2.8G, 1Gig RAM, 5 year old E-machine which mother board I've replaced since then.

Two days ago my computer wasn't working and gave me a Unmountable STOP Error blue screen. So I fixed that by repairing my Master boot record, but after that I had my computer up and running. So I took this time to defrag my computer, so I left to work while it was defraging when I came back I turned on the monitor to see if it was done(which it should have been by that time several hours later) and found my computer off altogether. So I started checking a few things and when I turned on my computer my monitor would not get a signal and it would give me three POST beeps about 3 seconds long each, but the CPU Fan would come on and my hard drives sounded like they were working and the PSU fan would come on. So I figured it was my CPU that over heated or shorted out, I had in the past never had luck with my mother board. Then I went and got another CPU and replaced it in my computer re hooked everything back up and turned it on it sounded like it was working but again I got one POST beep and then my computer will turn off. And again the monitor would not get a signal for the 5 seconds total its on, after thinking about it I'm thinking that it might be a PSU issue but I will have to wait till I get another one to test it out.

If any one has any suggestions about my perdiciment I would love to hear it, and I'm sorry if I wasn't clea... Read more

Answer:PC Turns Off after first POST beep

The 3 beeps at post sounds to me like bad memory stick...you might want to check that out next

Raven Master
http://www.hostraven.com
 

7 more replies
Relevance 54.12%

I have put together a barebones kit from Tiger but am having a problem.  Upon powering up, I get a long repeating beep. Keyboard lites up when power is turned on but does not activate when computer is booted up, no video.  Fans work, fan on AGP card works.  CD ROM led is on.  I have two SATA HDs plugged directly into the motherboard, not using IDE slots.  CD ROM is plugged into the IDE1 slot.  

Answer:Computer beep during POST

Beep codes should be identified in the motherboard manual that came with your system. If Tiger didn't send one then check the manufacturer web site.

7 more replies
Relevance 54.12%

Hi, I'm new here.

My nephew asked me to look at his PC because I'm the family computer expert

But I can't fix it so my reputation is in tatters. If you can make any suggestions I'd really appreciate it.

It's a desktop PC running Vista, about four years old. When turned on there's no display and it immediately beeps. It's a long beep repeated continuously.

The motherboard is by Foxconn (N15235) and after rooting around their web site I found that this indicates a RAM error.

I replaced all the RAM cards and the cmos battery but to no avail.

Possibly the motherboard is faulty, but I can't test that.

Ideas gratefully accepted.
 

Answer:POST and Beep Codes

Try to only put in the minimal amount of RAM sticks required (usually two) and if you have another computer that you a verify the RAM in, all the better. If you can rule out the RAM, then it's the motherboard. The memory controllers are complex pieces of silicon and it they are the fault, you'll get the same beep error.
 

3 more replies
Relevance 54.12%
Question: Phoenix POST beep.

When I hit the on button, screen stays blank and system emits a one second beep approx every four seconds or so.Could this be RAM failure?Anyone . . .Pleeeease . . .

Answer:Phoenix POST beep.

have a look here click herehope it helps.

2 more replies
Relevance 54.12%

Hey, i got my Gigabyte EP43-DS3L motherboard today, so i put all my hardware in the motherboard, as you do. All working fine in the old motherboard apart from the CPU which was brand new.

I'm almost sure i connected everything connectly, but when i start up it just spins the fans and LED comes on, the graphics card fan is much faster and louder than previous too.
I don't get any image on my monitor and there are 4 LEDs that say Phase next to them on the motherboard

Phase 1 is green, phase 2 is green, phase 3 is orange and phase 4 is red. I'm not sure if that means anything.

Wnat could be wrong guys? Everythign appears to be plugged in and working, just the motherboard isn't startign up Cheers
 

Answer:New Motherboard - No Beep or POST :(

8 more replies
Relevance 54.12%

Hi there I'm new here and would like some advice. I've just purchased a bare boned R40 with no ram, hdd or cards. It was advertised as "posts to BIOS" but I've not been able to get it working. I've added correct memory using both slots, one stick tried on each side, with battery and without, power x 10 plus 30 etc etc. All I get is usual LED lights, fan spin then just power and battery light. When you power off you do get a tiny click but no life in the screen. Any suggestions how to test and see if the system board is fried? Jaba x

Answer:R40 No splash, beep or post.

First, I am making an assumption that the board came with a CPU. The reason I am asking is that R40 came with both Pentium 4 and Pentium M CPUs. The CPU must match the board. The most basic test is to pull all the RAM and try to start. You should get a beep pattern 1-3-3-1.

6 more replies
Relevance 54.12%

I am using Phoenix award bios motherboard with 3GB ram and 250GB HDD. Some days ago when I started my pc I got black screen so I checked HDD CD ROM connection and RAM slot alothugh everything was okk my pc wasn't starting so I reinstalled processor but it was help less. Some one told me that if u r not getting beeps them ur MB is not working. Some months ago I got same problem but it was solved by reinserting RAM but now it is not helping. Plz help me if any one knows solution comment below or buzz me
Email id [email protected]
Mobile no
+917028194467
 

More replies
Relevance 54.12%

I am trying to build AMD system with following parts
Athlone 64 754 3000+,
GA-K8U Ulim1689 motherboard,
pc3200 512mb ram
gforce fx 5500 AGP,
new psu.

I fixed all parts connect hard drive, monitor and turn on
there was no beep, monitor is blank but both lights on front of case r on
little LED on motherboard is on, all fans(psu, hitsink, graphic card) r on
i can hear the hard drive spnning.
i disconnect and reconnect all parts several times.
i try to boot from cddrive but same thing
i have 2 agp cards and i try with both noothing come up on monitor
 

Answer:building AMD sys, no beep no post

Try clearing the cmos! Your mobo manual will tell you how!!!!
 

4 more replies
Relevance 54.12%

I was in to process of putting a new HD in my computer, seemed like everything was fine. Just as I was about to partition it, the screen goes blank. I reset the computer and I don't even get a beep on the POST test. I cleared the CMOS(even took the battery out) and I still get nothing.

I don't get it, I can't see the Bobo working fine one second then dead the next.

Abit K7-100 mobo
650 Athlon Slot A processor
256 RAM
32 MB Nvidia video card
 

Answer:No beep at POST test.

16 more replies
Relevance 54.12%

Thanks for taking the time to read this.  I'm hoping that someone can be my hero and solve what has been a six-week problem for me.  As one who works with technical support each day, I'll try to give as much detail as possible.  SCENARIO: Custom built computer, worked just fine prior to Thanksgiving.  Shut it down before leaving the house ... returned three (3) days later and it wouldn't boot up.  Got a series of never-ending, long beeps.  Nothing displayed on the monitor.SOLUTION No. 1: Thought the RAM was faulty.  Exchanged my 2Gb of RAM for a new pair.  Installed them carefully and securely.  Same result.SOLUTION No. 2: Thought it was the Mother Board.  Bought a new one from NewEgg.  Installed ... no more beeps!  But it still didn't power up.  Just the soft sound of the fans spinning.  SOLUTION No. 3: Cleaned off processor, placed new droplet of thermal paste and re-seated it.  Same results.SOLUTION No. 4: Replaced AMD processor with a new one (still 6 months left on warranty) and carefully placed in slot ... same result.CURRENT SITUATION: Computer turns on ... but there are no beeps at all, not even that single beep that lets you know that the world is right and your computer has passed the POST.  The mother board light is on (green) and the fans are spinning.  The power supply is a 500W and has worked fine before but could the problem lie therein?OTHER INFORMATION: T... Read more

Answer:Power, But No Beep or POST ... UGH!

The least expensive (free ) and quickest test would be to borrow a known good PSU of the same or greater wattage and swap it in there overnight to test...Also if that MBoard has onboard and there is a vid card involved remove the vid card and use the onboard to see if the card may be the culprit...Good Luck and keep us posted.

2 more replies