Computer Support Forum

Can a Toshiba Satellite A60 LCD Screen Be Installed On a Satellite A75?

Question: Can a Toshiba Satellite A60 LCD Screen Be Installed On a Satellite A75?

Would an A60 LCD screen work properly on a Satellite A75? I'm watching a system on ebay and it has a faulty screen. I have a working screen from a Satellite A60, and I would like to use it on the A75 system.Thanks!

Relevance 100%
Preferred Solution: Can a Toshiba Satellite A60 LCD Screen Be Installed On a Satellite A75?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Can a Toshiba Satellite A60 LCD Screen Be Installed On a Satellite A75?

It depends on the type and resolution of the screen...You may want to consult Toshiba Support regarding this question.

1 more replies
Relevance 102.09%

Would an A60 LCD screen work properly on a Satellite A75? I'm watching a system on ebay and it has a faulty screen. I have a working screen from a Satellite A60, and I would like to use it on the A75 system.

Thanks!
 

Answer:Toshiba Satellite A60 LCD Screen Installed On Satellite A75?

Nope, doesn't look like it.
The A75 has a 15.4" WXGA widescreen at 1,280 x 800
The A60 has a 15" XGA regular at 1024 x 768
 

1 more replies
Relevance 79.95%

Just by way of a test and as a curiosity (in the manner that a traffic accident is a curiosity I wanted to see if it was possible to install Win7 on it and ... quietly now ... was it usable?

Toshiba 3000-S353 - With a fresh reboot and when at rest, memory footprint is about 275 MB. Surprisingly, this is actually usable as a browsing machine as long as you don't visit sites with a lot of "active graphics". This screen snip pretty much tells the story...

After about 15 minutes idle, memory footprint fell to about 230 MB.

Answer:As a test - Installed 7137 on Toshiba Satellite

  
Quote: Originally Posted by srq2625


Just by way of a test and as a curiosity (in the manner that a traffic accident is a curiosity I wanted to see if it was possible to install Win7 on it and ... quietly now ... was it usable?

Toshiba 3000-S353 - With a fresh reboot and when at rest, memory footprint is about 275 MB. Surprisingly, this is actually usable as a browsing machine as long as you don't visit sites with a lot of "active graphics". This screen snip pretty much tells the story...

After about 15 minutes idle, memory footprint fell to about 230 MB.


Looking good there. Let's just hope Microsoft won't end up putting too much background services (which can be useless) when the commercial windows 7 is released.

1 more replies
Relevance 79.95%

Hi,

i just bought my Satellite Pro L650-165 and there are a number of softwares that come pre-installed with it.
Such as Toshiba Tempro, Eco Mode, Bulliten Board etc etc.

Considering the fact that i will be using this for my university i will be running numerous ram intensive programs on it.
So i want to free up all the ram i can by uninstalling all these utlities.
I know what you are thinkin... yes just because they are installed doesnt mean they are running. But is it safe to?

I know it should be but still asking. i just want to be left with plain ol windows7 minus all the 'cool softwares'. any precautions?

oh and although i have created the recovery discs using the builtin utility to do so.. i was thinking of ordering one from toshiba too. where to go for that?

Answer:Re: Want to get rid of Toshiba Softwares pre-installed on Satellite L650-165

>So i want to free up all the ram i can by uninstalling all these utlities.
I know what you are thinkin... yes just because they are installed doesnt mean they are running. But is it safe to?

Even if such tools are installed, this does not mean that they would run in the background and would waste a part of the RAM.
I would not recommend uninstalling such tools but to disable it from automatic startup.
How to do that? Esay?
You can do this in msconfig.

Start msconfig and go to start up tab.
There you can just uncheck the tools which you don?t need at the beginning.
Save the changes and reboot the unit.
If you would need one of the disabled tools again in startup tab, then you could enable this?

Note; disabling the process in msconfig does not mean that you could not start these tools manually?
Disabling the tools (processes) in msconfig means ONLY that these tool would not be started automatically when the windows boots up.

1 more replies
Relevance 79.95%

I have failed to install another OS (XP) on my laptop which came with pre-installed Windows Vista.
when i boot my laptop using Windows XP CD it copies the required files but when i press ENTER to install Windows XP the message appears that ? Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer and that any disk related hardware configuration is correct. This may involve running a manufacture supplied diagnostic or setup program. Setup cannot continue. To quit setup, press F3.?
I have gone to the bios setting so that i disable SATA but the option cannot be seen anywhere.
Please advise me on how to install Windows XP on my Laptop. I have a Toshiba satellite A205-S5871. Gad

Answer:XP Can't be installed on Toshiba satellite A205-S5871.

have you tried setting SATA settings to legacy in BIOS

2 more replies
Relevance 79.95%

I have a problem with my new laptop, it has no sound
I have tried downloading a driver but in the process it tells me to go to go into a file which doesn't exist on mines.
Please help
Many Thanks
Laura

Answer:Toshiba Satellite L50-B - No Audio Output Is Installed?

Hi
I am having problems getting sound on my new laptop. There is a 'x' over my volume icon on the task bar. Can anyone help with this?
Many Thanks
Laura
<edit by Jaylach>
I moved this post from another thread as it is the same topic but contains more info.

3 more replies
Relevance 79.13%

Hi,

The Common Modules is very important and i can't install it.
My OS = XP SP2 64-bit SATA
laptop model: L300 1AM

There are very many questions on this issue (Common Modules not installed) and support boys do not give a solution.
That's mean is not possible to install Common Modules & other for certain types of laptops.

These posts are good only for SEO.

Is impossible for me to reinstall XP again. I saw in forum "The Common Modules is very important, you should always install this as soon as possible." How soon? before installing XP? That is a big stupiness.

Thank you for using the largest online support namely Toshiba.

Answer:Toshiba Common Modules is not installed on Satellite L300-1AM

Hello Chris

Can you please tell me what SEO is?

Anyway, what to say about your posting? The info about ?Common modules? is right but I don't understand your problem with it. Your notebook is supported for WXP 32-bit and you want to use WXP 64-bit. So first problem you have is that Toshiba doesn?t offer tools and utilities for WXP 64-bit.

On this point we can stop the discussion.

If you want to know how the ?Common modules? works and why is this important we can discuss about this too but it has nothing to do with your question about WXP 640bit installation on your notebook.

I am really surprised Toshiba guys didn?t explain it to you.

2 more replies
Relevance 79.13%

I need internet and i don't know why Windows 7 doesn't detect the drivers i downloaded from toshiba's website for my notebook model because apparently doesn't come with the drivers for my network controller.

I need to find a way to make internet work ASAP, this is delaying me big time, i already spent 6 hours plus in something that should have worked in the first try.

My laptop: Toshiba Satellite P745-S4217
I downloaded the drivers from Drivers & Software Support | Toshiba (6B333645K is my notebook's s/n)

Please help me before i cut my balls

Answer:W7 can't detect my Toshiba's Satellite installed network drivers

Hi Welcome to Seven Forums ... You need lots of Drivers ... We shall start with the Network Controller ..
Satellite P745-S4217 Support | Toshiba
http://support.toshiba.com/support/m...eeText=3025538

2 more replies
Relevance 79.13%

I have a Toshiba Satellite C50-A513 running Windows 8 x64. I have tried downloading Toshiba HDD Protection thrice but every time I download it and then install it, nothing comes up. Once its installed, NOTHING shows up. It's like the installation bar finishes off but no dialogue box for HDD protection shows up. I have tried looking it up in the control panel under HARDWARE AND SOUND to check if it had been successfully installed but found nothing of relevance over there.

Yes, I did download the right suited driver for my laptop and that too several times just to make sure. Could someone tell me what's wrong with this and how can I get it working?

Awaiting response,
Thank you!

Answer:Toshiba HDD Protection utility cannot be installed on my Satellite C50-A513

According notebook specification your machine was delivered with preinstalled Win8.1 64bit so I?m asking myself what are you doing exactly.
Please don't understand me wrong but you got machine with latest OS version but now you have troubles using older OS version.

Somehow it is not logic for me.

Anyway, I?ve tried to check download page for your machine on http://www.toshibamea.com/en/Download-Files but somehow it doesn?t work properly. I presume there is some temporary problem so I cannot check which stuff is listed for download.
Out of curiosity but have you installed Toshiba system driver at first?

6 more replies
Relevance 79.13%

Hello!

My toshiba doesn't want to boot,and I can't press F2,F8or F12.

I tried everything unplugging the battery,taking out the HDD, everything!!

And i can't do absoloutley nothing when i turn it on no button on the keybored does anything.


Please help!

Answer:Toshiba satellite P300 (-1CD) won't boot past toshiba splash screen.

Hello,

Perform the following steps:
-Remove the battery and Power adapter
-Press and hold the power button for 30-45 seconds (with battery and power still removed)
-Insert just the battery and attempt to boot the laptop.
-Insert just the power adapter and attempt to boot the laptop.

If still unsuccessful: Remember to remove battery and power before removing/installing components

-Remove the power and battery
-Remove the hard drive from the laptop and attempt to boot with the battery installed. Do you receive any error message?
-Remove the memory modules from the laptop
-Insert just the battery and attempt to start the laptop (you should receive beep error)
-Try inserting just one module of memory and test (swapping modules after each attempt)
-Remove the optical drive and test.
-Try disconnecting the CMOS battery for a few minutes then re-connect and try.

How to take apart a Toshiba Satellite P305 series notebook

3 more replies
Relevance 78.72%

Hi,
My laptop cannot tell me any post after the Toshiba logo just black screen. Cannot get into the bios or anything... These are the things I have tried:
Taken hard drive out,
Taken ram out and only tried one..
Taken Battery Cmos battery out for a few minutes..
Had a look at the motherboard and fan is not even working when I turn it on..
I have taken the cpu and put it back in..
Defiantly Sounds like the motherboard problem but want to know if its just a chip that needs to be replaced and soldered.. If anyone has any ideas that will be awesome.

Thanks
 

More replies
Relevance 78.31%

All, bought my laptop in Jul06 and cannot remember any details of the Toshiba set-up sequence and can't find any notes I made :-( My question is does the standard Toshiba WinXP set-up out of the box ask me to set-up a password for the WinXP administrator account 'cause I can remember it doing so?

Is this my bad memory or was I not prompted and there is some Toshiba default? I ask now as need it and have abosolutely no idea what it is!!!!

Yours Respectfully, Mr A. Fool.

Answer:Admin Password with Toshiba WinXP installed on Satellite A100

I have recovered my Satellite notebook 2 weeks ago and I?m sure that the setup has asked me to set the admin password.
You have simply go through the setup procedure and sometime the admin password box will appear?

2 more replies
Relevance 78.31%

Installing driver display-psaa9-vista-9754.zip ends with "No compatible hardware found message".
My notebook have GeForce Go 7600 (PCI\VEN_10DE&DEV_0398&SUBSYS_FF101179&REV_A1).

Answer:Toshiba Nvidia drivers for Vista cannot be installed on Satellite A100-912

yeah, i've got the same problem. There is a solution?

14 more replies
Relevance 77.49%

Hello All,

Just bought Toshiba Model: A135-S4677...at Circuit City. I see that the Google Toolbar is already installed. Probably installed by Circuit City and not Toshiba. Has anyone tried to uninstall this bloatware?

I have not yet tried uninstall. I can only think that this would not be a simple uninstall thru the Windows uninstall program.

Has anyone had experience doing the removal? Also,
Are there any other preinstalled programs that could slow down the notebooks resources... that should be unstalled?

Thanks everyone for your help.

Answer:Satellite A135-S4677: Question about removing of installed Toshiba tools

Heyho,

where?s the problem, just uninstall that google stuff. My mum had it on her machine (which us actually not from toshiba) and I just removed it. Everything went fine and the machine works perfectly.

Otherwise I would let the other tools which are hardware related stay on your system.
If you got some other questions, feel free to ask.

Greets

2 more replies
Relevance 77.49%

Hello

When I will install P0044v370 BIOS Update than I have a error "Toshiba Common Modules is not installed".

My Notebook Toshiba Satellite Pro U200 with Windows XP Prof.


Pleas Help me

Ps. I don?t have a Toshiba Recovery Disk

Answer:Satellite Pro U200: BIOS update - Toshiba Common Modules is not installed

The message is clear enough!
The Common Module is not installed and therefore you cannot update the BIOS.

Visit the Toshiba European driver page, download the Common Modules for Win XP and install it.
Then you should be able to update the BIOS.

Regards

1 more replies
Relevance 76.67%

Just Installed windows 10 on my Toshiba Satellite laptop and lost all sound and google voice....please HELP !!! Everthing is turned on and appears fine but no sound and cant use my google voice...

Answer:Just Installed windows 10 on my Toshiba Satellite laptop and lost all sound and google voice....

Check in Device Manager... Look for any items marked with an exclamation point (!) in a yellow triangle, especially those for your audio card. Update drivers.

4 more replies
Relevance 76.67%

Ok. So I upgraded my Toshiba Satellite U300 laptop from Vista to 7 in October - mainly to end the issue I was having with the audio output device not working. My issue was resolved and I have had no problems until today. I turned on my laptop and there was that ominous red X over the speaker symbol in the lower right hand corner and when I mouse over it, it says, "No audio output device is installed."

I ran the troubleshooter and the results of the scan for hardware changes comes back with little yellow caution signs with exclamation points in them telling me there are problems but not giving me any help as to how to fix them.

I went to the Toshiba site and downloaded and ran the Realtek audio driver for windows vista/7, restarted the laptop and found no change.

Then I downloaded and ran the Conexant audio driver for vista/7, restarted the laptop and found no change.

When I go to Start, Control Panel, Hardware and Sound, Device Manager, there is NO Sound/Audio Driver in the list.

Is there anyone out there who can help me at all? I'm beyond the point of frustration over this.
 

Answer:Help! No Audio Output Device Is Installed - Windows 7- Toshiba Satellite U300 laptop

16 more replies
Relevance 73.39%

My new Toshiba Satellite P870 Starts with Screen Flickering 1,2 or 3 times with every start, exactly AFTER Toshiba, Leading Innovation Logo starts.

Anybody can help?

Thank You In Advanced!

Answer:Re: Satellite P870 - screen flickers for some time after Toshiba splash screen

I don?t know how it looks like but something like this should not happen. If you have brand new notebook contact your local dealer as soon as possible, explain the situation and ask for replacement.

If you are not happy with your product you can get replacement. In my country customers have 14 days time to do this.

3 more replies
Relevance 73.39%

My laptop (Satellite A300) has recently a big problem after when i turn it on.
When I turn on my laptop, after big logo of Toshiba in red i should go to Windows but it just stop and i only see a black page and nothing happens after that, even if i wait for ages, that black page stays same.

I don't know what to do?

Answer:Satellite A300 doesn't boot - black screen afer Toshiba splash screen

Hi

What happens if you press F8 at the beginning?
Can you see the Advanced Boot Menu?
Are you able to access the BIOS?

4 more replies
Relevance 73.39%

Missing Ethernet, Network, PCI Simple Communications, SM Bus and Universal controller drivers. This isn't my laptop, I'm just fixing it for a friend.

Someone on another forum asked for this information:
PCI\VEN_10EC&DEV_8136&SUBSYS_FB371179&REV_05
PC\VEN_10EC&DEV_8136&SUBSYS_FB371179
PC\VEN_10EC&DEV_8136&CC_020000
PC\VEN_10EC&DEV_8136&CC_0200

I don't know if I need more, but I tried downloading plenty of driver to no avail.

Answer:Toshiba Satellite Satellite L875-S7209 network drivers missing

Hi for what OS is this for. have you been to toshiba support page for the drivers? should install the chipset driver first.

get drivers from here. http://support.toshiba.com/support/m...eeText=3466715

9 more replies
Relevance 73.39%

hi everyone,

I have a toshiba satelite pro 4270 laptop, and have finally got pretty much everything configured correctly and sorted out after expperiencing RAM propblems. Right, so heres the slight problem with the laptop, which involves the screen. The screen is 13" and (unfortunately) has a max resolution of 800x600. Basically the problem is the screen is verry laggy, and when i type on MS Word, it takes like two seconds for the text to come up on the screen, and the laggyness is making using the laptop a negative experience. I first suspected the graphics were not up to the job of displaying xp, but i connected the laptop up to an external monitor, and the laggyness problem is gone. There were also a few older games i was intending up install on the laptop, but there is no point due to this problem.

Does anyone know wether toshiba just made duff screens on toshiba laptops, or wether there is any way to change screen response rate?

many thanks in advance!
 

Answer:Toshiba Satellite Pro- Laggy Screen

this sounds like a driver issue. Ensure your drivers are up to date.
 

1 more replies
Relevance 73.39%

The lcd screen backlight work fine, but screen is reddish. When I connect the external monitor to the laptop the video is great. When I installed a another used lcd screen into laptop the is white, and no video. So, I ordered another video cable hoping that this will fix the problem. What could cause the lcd screen to be white? The external monitor work good with the laptop, I am not getting any video to the lcd screen. Could the video on the motherboard be bad?
Thanks!
 

Answer:toshiba satellite a40 laptop-LCD SCREEN

I don't think you have a bad video card if the image on the external monitor is fine. It sounds like its either the video cable or the backlight inverter. If the original lcd screen is bright enough and clear enough (except for the reddish tint) then I'd suggest trying the new video cable with the old screen. If you still get a reddish tint then I'd recommend replacing the backlight inverter (if you can - not all laptops allow this).

The only reason I can think the new screen isn't working is due to no/out-of-date/incompatible drivers. Still, not sure why the screen would be white. Have you tried the screen with a different laptop?
 

2 more replies
Relevance 73.39%

Hi guys. my mate rang me up today and said that their laptop screen just went blank. i asked what happened and they said it just went like that. i have read about inverters or backlight. How can i fix it cause its out of warranty. also how do i get stuff off the hdd if the comp is really dead? Can i just take it out like a pc and hook it up to another? Any help would be great
i will post more if i find out anything else about it.
Cheers Matt

Answer:toshiba satellite blank screen

If you can shine a light through the back and still read the writing on the screen (it will be extremely dim) then it could be a bad inverter or backlight. If you test it out and can't see any writing on the screen using a blacklight then the screen has gone out and will need to be replaced.

1 more replies
Relevance 73.39%

Hi everyone, I'm very sorry if this has been asked and answered before. I have a Toshiba Satellite L305 series laptop running windows vista home premium. Last week I got a blue screen that I didn't read in time so I don't know what it said, and then it shut down. I tried to restart it but only get to a black screen with a moveable white arrow. I tried using windows startup repair, it gives me a white bar at the bottem that says loading files then the windows copyright screen but then just does the same thing and goes back to the black screen. I've tried booting in safe mode, booting with last known good configuration, and system recovery. I've also tried using a recovery disc, that I had to buy from toshiba b/c I lost my disc in a move, to no avail just the same black screen. Any help would be greatly appreciated. BTW when I put the recovery disc in you can hear the disc spinning and the fans working until it gets to the windows copyright page then everything dies down and black screen time.
 

More replies
Relevance 73.39%

Toshiba Satellite L755-S5153
Windows 10.

It was upgraded to Windows 10 sometime last week. Ran fine for a few days, then when they went to turn it on a few days ago, it flashed the Toshiba splash screen and the screen went black. Now, when you turn it on the power button comes on and hard drive light flashes, like it's accessing the hard drive. The fans also kick on, but it sounds like it's pulsating.
The screen itself does not come on at all, no back light or anything it just looks like it's still turned off.

I pulled the hard drive and backed up the files on it as a precaution, when doing so I tried to boot the system without it to see if it kicked me out to needing a media to boot from, but it acts the same, except that the hard drive light still flashes like it's trying to access the hard drive that's no longer there.

Any ideas on how I should proceed, or any idea what caused this?

Thanks,
Spock96

** Sorry for sounding scatterbrained, long day at work.
 

Answer:Toshiba Satellite, Screen Doesn't Come On.

The first thing to try on any laptop with a blank screen is an external monitor. If it is connected and on, most laptops will use it when you turn on the laptop; but, some may make you fuss with the key which looks like a screen somewhere along the top.
If the external monitor works, try reseating the video cable on the system board end.
 

13 more replies
Relevance 73.39%

Alright, so im not sure if this is software or hardware issue, but my satellite restarted for an update about a week ago and turned back on with a black screen. I tried taking the battery out, pressing the power button for 60 seconds, restarting it, starting in it safe mode, factory resetting it on startup. Nothing. Sometimes the fan will be running, then the machine stops. Sometimes it will just run and stay on the black screen. Sometimes it will start up and the power button wont even be lit, but the fans, and the led for caps lock will be on. Is it time for a new computer, or is there a way to fix this?
 

More replies
Relevance 73.39%

Hi,
I and my wife have same toshiba satellite laptop. Her laptop screen suddenly started showing white and some colored disorted lines on half screen. Yesterday I took at my laptop screen and replaced on her laptop and display worked fine.
So is it that i have to replace whole lcd or it could be some part like I remember there is a cable attached to screen.
Any help will be appreciated

Answer:Toshiba Satellite L675 LCD screen

When this happened on a granddaughters Toshiba it was due to a make up spray "wicking" through the rim. A new screen was needed as there was a bit of "shorting" on th circuit board concerned.

4 more replies
Relevance 73.39%

Hi

I got a Toshiba Satellite S50, it?s about 6 months old. Now when I turn it on all I get is the "Toshiba leading innovations" screen and that?s it.

It doesn?t go past that, just stays there. I can get into bios, I don?t have the original hard drive that came with the laptop, I have a 500gb 2,5" Toshiba hard drive. I want to put my windows 8 on the hard drive.
I?ve created a bootable USB with windows 8 on it, set the laptop to boot from USB, changed to UEFI BOOT but nothing happens when I reboot the laptop. it just stays on the "Toshiba leading innovations" screen.

Any ideas what I can do or is the motherboard knackered?
I?m assuming the warranty is out the window as the original hard drive is not in my possession as the original owner took it out as it had his private data on it. Will Toshiba fix this for me?

I only want it to pass that ?Toshiba screen..but no joy..

Answer:Satellite S50 - cannot pass Toshiba welcome screen

Hi Billy,

In the BIOS have you also enabled 'Secure Boot' under the 'Security' options in the BIOS, WIndows 8.1 requires this to be enabled.

Also your warranty will depend on if the HDD is 'User Accesible' - did you have to remove the whole bottom cover to change the HDD or just remove a door? If you only had to remove a door you will not have voided your warranty as this is a User Accesible part, if the HDD is the cause of the problem you will be charged for repair, if the Motherboard is the cause you should not be charged.

Hope this helps,
Z

1 more replies
Relevance 73.39%

the other day it was working fine turned it off then went to get back on later on and I turned it on the TOSHIBA welcome screen comes on then the next screen is black with the little white - in the upper left conner then there will be white flash then whole screen turns black nd nothing does anyone know what has happen??????????? And How to fix?

Answer:Toshiba satellite screen went black ?

It sounds like a disk error or start-up error - take it back if it's still on warranty because you probably need to reformat (delete everything) and reinstall Windows.

3 more replies
Relevance 73.39%

I have a just barely 6y/o Toshiba satelliteA135-S4666. Few says ago was working perfectly fine, now the screen footed blank after a few seconds of turning on. It's still running and sometimes i can get the screen back on if i move it back and forth.
That at least gets me to believe maybe a wire is just loose and not the graphics or motherboards. I just need some directions on were to go from here.
 

Answer:Toshiba satellite screen goes black.

14 more replies
Relevance 73.39%

Simple Story...

Laptop fell down from about 2 - 2.5 feet and when I tried to turn it on again the screen went blank. I mean, it's blank right now, the only way I can use the laptop is if I connect it to a standard monitor, but alone it will just show a white display.

Any suggestions on what this can be? messed up VC? maybe Busted LCD? Dunno at this point any suggestions/solutions/help is appreciated .
 

Answer:Toshiba satellite A75 White Screen

Fixed it. Removed LCD Display, small white cable behind the display was completely off, re-inserted cable, everything is fine now .
 

1 more replies
Relevance 73.39%

Opened my daughter's laptop this morning and it seems like the LCD has "dissolved" in the left bottom of the screen. There's no identation on the screen or any sign of damage. The liquid crystal just seemed "smeared" or something in the corner. Any thoughts? I'm not a technie so sorry if I don't know all the terminology... I purchased this for her for Christmas at Office Depot so it's only a few months old. Please help! Thanks mucho!
 

Answer:Issue with Toshiba Satellite Screen

The LCD screen could have been damaged by placing a heavy object on the top of the closed laptop or by bumping or dropping. It doesn't take much... The LCD panel might be under warranty. Its worth checking into. Otherwise, it is expensive to replace. They cannot be repaired
 

1 more replies
Relevance 73.39%

Hi, I'm having trouble with the screen on my Toshiba Satellite L775-S7352 when it reaches the Welcome screen on Windows 7 Home Premium 64 bit. This happens while reaching the Windows Welcome screen & sometimes it will reach the desktop before going fuzzy. It boots fine into Safe Mode.

https://www.youtube.com/watch?v=JpwnCvsN-G8

I've already checked the HDD and the Memory - they are fine... I've done a fresh install of Windows 7 Home Premium 64 bit from the manufacturer's recovery disks - the screen and everything else worked fine even through the first round of Windows Update (193 files) the machine rebooted after the updates and I checked for more updates. As soon as the installation of the second round of updates began the screen went buggy.

So I formatted the HDD and tried another reinstall - I successfully reinstalled the system and this time the screen went buggy trying to search for the first update for this reinstall...

Is this an issue with the screen or the GPU? any ideas?

Thanks,

Mike

Answer:Toshiba Satellite laptop has Fuzzy screen when reaching Welcome Screen

Hi first hook it up to an external monitor. does the external have the same problem?

9 more replies
Relevance 72.57%

Hi,
my M40 sometimes stops booting after the Toshiba Screen. It stops and all I can see is the flashing cursor. No Error-Message or something else and normal booting from HDD. Booting from CD (eg. Knoppix) works. This problem only occurs sometimes and isn?t traceable for me.

Best Regards
Spoony

Answer:Satellite M40 - 129 stops booting after Toshiba Screen

Hi Spoony

Unfortunately on this way it is not easy to say why this happen. Every user has individual OS configuration and we don?t know how your OS is configured.

Can you start OS in ?safe mode?? If yes check a little bit what the problem can be. If there is nothing that you can do I recommend you to save all your data and preinstall unit using recovery media. If you do this I also recommend you to create two partitions.

Don?t compare WXP and Linux booting procedure. Like you know Knoppix uses just RAM and not HDD for running.

7 more replies
Relevance 72.57%

Hello, I've bought a Toshiba Satellite S50-B-15Q and it works fine, except the HDMI port. I cannot connect to a second screen with Windows 10. I've tried the following things;

Checked the cable - Reinstalled drivers (Windows and Intell Graphic), installed the Toshiba HWSetup, tried different kinds of secondary screens, toggled with the Windows P button, adjust settings in the configuration screen, and after different adjustments rebooted the laptop many times, searched the internet..... But nothing so far. What I can see is that the secondary screen flashes (depends on the model, but I also can see the blue or orange LED light) and even my toshiba laptopscreens goedd for a moment to a black screen and then comes back normally, I can even move my mouse to the other screen (I see it disappear from my laptop screen), but the other screen stays black. I also adjusted the Resolution, but nothing. Just a annoying black secondary screen.

Has anyone have the same experience and a solution, because I need to give presentations for my work, and then I need to connect it to a bigger scree or TV.

More replies
Relevance 72.57%

I have a toshiba satellite a665 and the screen distorts when the brightness is too low. What is causing this?






















 

Answer:Toshiba Satellite a665 screen distortion.

I've seen this caused by bad or loose ram.

Try and re-seat your laptops ram modules. By that I mean take it out, then put it back in. Making sure that the ram modules are snug when you replace them.

Note!! Make sure and remove all power from the machine, prior to working on it. Unplug it -- take out the battery -- hold the power button for 20 seconds.
 

7 more replies
Relevance 72.57%

Above computer turns on, battery is good, fan spins, but the hard drive does not spin. I hit ESC, F1, F-whatever to see if I can get it to boot into setup, nothing happens. I put a bootable diagnostics disk in the DVD/CD drive and it spins, but nothing happens on the screen. I hooked up a monitor to see if it was the screen, but the monitor doesn't receive a signal. So, I'm thinking it could be two or three bad things. Bad hard drive, but why wouldn't it boot into setup and why is there nothing on the screen? Bad motherboard? That would explain everything, I think. Bad CMOS? Any help with diagnostics here?
Keith
 

Answer:Toshiba Satellite L655D Black Screen

Check the CMOS battery first. It should be 3 volt.
The hard disc not spinning up could be bad news.
 

11 more replies
Relevance 72.57%

I am using Windows 7 Professional - not the RC.
The Fn + Brightness Up/Down doesn't work - in fact, none of the Fn key combinations seem to work.The slider controls through control panel > power settings OR the windows mobility center, do not work either.Any known causes/solutions to this problem?

Answer:Toshiba Satellite A100-SK8 Screen Brightness

Hi,
 
We need to install a driver (or program) for the Function key combinations. It should be provided by the computer manufacturer.
 
I tried to search for the A100-SK8 but failed to find it. Please refer following link:
 
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
 
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
 
If your computer can be found on the website, let's check if there is any newer program related to Fn key function. If so, download and install them.
 
If failed to find, we may need to contact Toshiba for further help.
In addition, I suggest that let's confirm with Toshiba to see if Windows 7 is available for the computer. If there is no Wnidows 7 driver provided for the computer, some function keys may not work.

4 more replies
Relevance 72.57%

The PC's lights turn on. The fan goes, but the laptop has a black(dead) screen
 

Answer:toshiba satellite a200 dead screen

Try connecting a monitor to it if you have one, and press Fn + F5. If you get a display then there is something wrong with the internal display. If no display, something else is wrong.
 

2 more replies
Relevance 72.57%

hi Toshiba. Ive been having a problem with my Toshiba that I have had for a few years now. the screen has blacked out and everytime I reboot it it still stays black. I have tried every rebbot type and I have asked a lot of people but none of them work. please help. thanks
Zach Attard

More replies
Relevance 72.57%

Hello,

My Toshiba Laptop is stuck at black screen after I was disassembling it. I was opening it because I accidently resetted the bios security settings to default. Suddenly the bios password box is opening while booting and wants a password. After searching the Internet I found out that my laptop wants the supervisor password which I don't own. Couldn't call Toshiba Support because I temporarily have no phone. So I decided to open the laptop to reset the CMOS. Removed the battery and fully disassembled the laptop till the motherboard was naked. Then I found the CMOS jumpers. But there where four of them and I couldn't find any instructions for four jumpers so I decided to close the device. After fully reassembling it I turned it on and the screen was all black. Only the white LED was on and the light round the power button. Tried many instructions from the Internet again but nothing works. Not even the USB ports seem okey cause when I insert a stick in all of them the lights for 'stick is working' are out (my USB sticks got LED's) Then I linked my laptop via HDMI to a friends TV. No signal. I'm crushed. Help me pls!!!!!!!!

More replies
Relevance 72.57%

Hi guys. Apologies if this had already been raised but I need to get my laptop working.
I cannot get past Toshiba welcome on Windows 10. I am not able to work due to health issues so money is tight but have been quoted early ?100 to repair. Anything I can do myself, please??

More replies
Relevance 72.57%

OK first off I'm sorry that this ends up being my first post. I work in IT as my day job but I know more about the quirks of machines I've been dealing with for years. Anyway I have a friend with a Toshiba Satellite A665-S5176x and it will look like it's booting fine and then it shows nothing but a cursor and a black background. BEFORE any of you suggest anything please look over what I've done (listing in order)


1. Tried to boot in safe-mode (same thing)
2. Tried window 7 disk (wouldn't show anything besides black screen...so no system repair)
3. Tried to boot normally and the PC BSOD'd and then rebooted...then blank screen
4. removed HDD and put it in my laptop where it booted just fine (so not a software issue)
5. Looked for mini-dump to see if BSOD info was present...no such luck
5. since I had my HDD out anyway I put it in the toshiba to see what would happen, it black screen'd as well.
6. reset bios to default...nothing changed

At some point I saw an error mentioning a hardware failure but I don't remember when I saw it. More importantly if anyone has any other suggestions I'm willing to try them. I'm at a loss here

Answer:Toshiba Satellite always boots to a black screen

So you get the usual POST and then it just goes to the wonderful Black Hole of Death, right?

No other messages whatsoever.... but at least eliminated the inverter (backlight) as being toast since you did get POST.

Ideas:

Reseat the RAM and clean the contacts.

Clean the inside of the laptop out including all the fans + intakes of dust bunnies.

I'd remove the CPU heatsink and redo the thermal paste with Artic MX-4 (best available), same for the chipset's heatsink if applicable.

I would put in a trusty Linux Live CD (I use Linux Mint's) and of course set the bios to boot off the DVD drive and see if that WORKS or not. [If it can't handle that, then you know it's a shot motherboard, which is the likely scenario, since the video is integrated.]

Could check the voltage on the power supply with a multimeter, also, make sure it's not shot.

See where you are at after those things.....

2 more replies
Relevance 72.57%

As the title states, I have a Toshiba Satellite laptop (If you need exact model, lmk)
that I found in an old box and could actually use an extra laptop around for schooling. 
I get a blue screen off boot up as soon as windows begins to load (even before password input)
The error code is 0x0000008e and I have tried most remedies.
Last Known Good Config - dies
reset to older date - dies
Memtest - clean
 
I feel that the motherboard is either fried or a deep issue is happening.
 
If I can find the OS cds, would a reformat/install be the best way to go?
 

Answer:Toshiba Satellite Blue Screen on Boot Up

What do you mean by reset to older date? you mean System Restore? 
 
TRY:
 
1. Try to choose the earliest date on the system restore and  see if it works. 
 
2. Try to do a start-up repair on the windows cd first before you try to format.
 
it could also be your Cpu, you may need to replace it and try it first before doing anything with the motherboard.
 
Also if you can get into safe mode, try to uninstall/update all of your drivers in Device Manager by doing this.
 
1. As soon as your pc starts up hit f8 till if gives you options to go into SAFE MODE.
 
2. Click Start- Right click Computer- Properties- on the left click Device manager. Then go through each driver and right click on it and hit uninstall and it will re install them self.

2 more replies
Relevance 72.57%

I have a Toshiba Satellite model L850-1JR and I have the following problem:
From time to time, when you turn on the PC and spend a few minutes, the screen is completely black.
It seems that the operating system still works and I can not recover it. I happen to both with a battery and connected to the NETWORK.
Disconnect the PC by pressing the power button for a few seconds, remove the power cord and wait a few minutes. I put the cable back and proceed to start it, but it still does not work. The power LEDs if they work and the pc seems to start perfectly but without seeing anything.
Occasionally, when this happens, when the screen is moved the PC recovers and other times until it does not spend enough hours does not turn on the screen again.
Could you tell me what may be happening and / or how to solve this problem?
Thank you very much

More replies
Relevance 72.57%

Hello
I have a toshiba satellite L300 laptop. When using it last night the screen blacked out, although the system was still working fine. I rebooted the laptop and it came back on again but blacked out after 2 mins. It then worked after pressing the power button briefly to log off, the screen came on again but only for a few seconds. Now the screen is not working at all although the computer appears to be running ok. I will have to locate another monitor to plug in to see it the fault is the screen.
Does anyone have any ideas what this might be and if so, how to resolve this?
Thanks

Tony
 

Answer:Toshiba Satellite L300 screen problem

7 more replies
Relevance 72.57%

I bought a VGA cable to connect my laptop to my TV in order to mirror what ever is on my laptop screen. My TV did not pick up anything when I checked the Sources.

I opened the "Action Centre" on my laptop and selected "Project". I changed the current setting of "Duplicate" to "Second Screen Only", this caused my laptop screen to go black when the VGA cable was connected. When I disconnected the VGA cable my laptop screen came back on. This frustrating because I want to change it back to "Duplicate" but it is impossible to navigate while the VGA cable is plugged in because of the black screen.

note that when i changed it to "second Screen Only" my TV still did not pick up my laptop.

any solution for this?

More replies
Relevance 72.57%

Hi,

I'm looking for the screen lid for a Toshiba Satellite U840-10U, part number PSU4SE-00G015CE. It was bought in Spain so it might be a different model number to the UK model.

Then this extra code (1EU/+1/PRES)
Does anyone know where I can get one of these please?

I live in Spain but I guess I can order from worldwide if necessary

Thanks

More replies
Relevance 72.57%

On start up computer flashes opening screen then goes to black screen with flashing cursor in top left corner...
 

Answer:Toshiba Satellite P-35 Black Screen w cursor

Can you boot to safe mode?
Have you tried last known good configuration?
Do you have and recovery disks, images or an XP disk?
What is the exact model (letters and numbers after P-35)?
 

29 more replies
Relevance 72.57%

Hi there, I have a Toshiba Satellite A200 and I've encountered a frustrating problem. Let's just get a few things out first.

I had intended to turn it off last night, but it didn't shut down. There was some message about a program still opened or something like that (not a big deal I thought as I had gotten it a few times before). I just clicked whatever it was that ended it or turned it off anyways. So today I come back to turn it on and it was on that message. I turn it off and come back later to turn it on. I noticed there was a black screen and I could not do anything. I hold the power button to turn it off and restart it. It loads the Toshiba/Phoenix screen fine. Then I get to the Windows Recovery screen. It gives me two options.

- Use the Windows Recovery thing to try to find and repair any errors
- Start Windows normally

I tried the first option a few times but it said there was an unspecified problem due possibly to some hardware configurations (did not do anything before). I restarted and pressed F2 and looked for anything that might have caused it and I exited without saving any changes (Toshiba/Phoenix thing) and then it led me to the screen with the Safe Mode and other options. I chose Safe Mode just to see and it led me to the log-in screen, but after that it would not let me see those same options again, but I can still get into Safe Mode using F8. Anyways, I would start normally and at the loading screen, the bar would load but there is no Vista logo. After ... Read more

More replies
Relevance 72.57%

Whenever I did 'sleep', on my Toshiba Sateliite P200-10C my screen often would go from 1200x1400 to what looked like 600x800 dpi. Half the time I would need to restart 1-3x to get back to my 1200x1400. Changing by manually going into the screen setup didn't do anything. I never had any error messages.

Suddenly the last time the screen looked 600x800 but this time with vertical lines--no error messages. I restarted hoping for the best and the screen went from off-black to dark grey like it wanted to come on but couldn't. Restarting 8 more times did nothing. Hitting F8 for entry into setup just made the comp beep in protest.

I plugged the Toshiba into another screen and that showed up everything I had just fine.

Does this sound like a video card died? Is this common for Toshibas? It's a year old.

Thanks in advance for any help. My comp specs below:

Toshiba Satellite P200-10C
PSPBGE-0020111G3
Core2 Duo T7200
1024MB + 1024MB Memory 667Mhz/256Vram
250 GB HD 4200RPM SATA
17 WXGA+ Trubrite TFT screen
DVD-Super-Multi Drive (2 layer)
56K Modem/Lan
W-Lan (802.11A/G/N*
1.30MPixel Web camera
Bluetooth
OS Vista Home Premium 32 Bit
IE7
 

Answer:Toshiba Satellite P200--dead screen

Could be the video card, could also be a loose cable, since its only a year old, it may still have a warranty. If it does take it for servicing
 

1 more replies
Relevance 72.57%

i'm trying to remove the front bezel to replace an LCD screen, but I'm having troulbe removing the panel. The top and the bottom come off very easily, but as soon as I try to remove the sides, there is a lot of resistance. I've already put a little crack in the bottom left corner. I've tried searching around the net to see if I have to remove more then just 5 screws, but everything I find says that I should just be able to get it off. Anyone have any idea why this is happening.
 

Answer:Toshiba Satellite A100 Screen Bezel

7 more replies
Relevance 72.57%

Hello can anybody help with this problem after turning on the laptop it starts to load up the screen that says in touch with tomorrow at the botom lefthand side it says press f2for systemu utilities or press f12 for boot menu
the blue progress bar is at about 70% but all locked up any ideas

This laptop was a gift form my ever loving sister in law she says it worked when put away about 3 months ago but when she came to use it this happened many thanks to all who read this
 

Answer:toshiba satellite pro A100 screen freeze

I have a Toshiba A100, try to push F8 at the start and go to =Last known good configuration
or
if F2 is pushed, go to the tab about order of Start, make it HDD, maybe it is set to a CD

I never used F12.
 

1 more replies
Relevance 72.57%

Hi everyone. Im new here and was wondering on, how do i get the screen back, as I've just changed the screen ribbon on toshiba c660 as my old ribbon had broken wires. Everything works and can hear the fan etc but no screen. I noticed though that if i shine a light on the screen i can see the background. Im not computer minded but need help. Thanks
 

Answer:toshiba satellite c660 black screen on xp

Hi mw_86 and welcome to TSG.

Have you tried an external Monitor ? I would do that first if possible and if it's display is good carry on below.

With those symptoms if that model has an Inverter I would try switching it with a known working one.
You should find some on Ebay. (I've had good luck even with used ones).

If it does have an Inverter it could be the backlight instead but that's usually much more difficult to replace.

If it's an LED model (ie no Inverter or Backlight) I would guess either the LEDs have failed or they aren't getting power from the motherboard.
 

1 more replies
Relevance 72.57%

Dear all,

I have Toshiba Satellite M70, I need help and i will describe my problem:

- Few days ago my screen went black suddenly, i don't know how cause i was away from the laptop.
- Until yesterday, when i boot my laptop, it gives me black screen all the time but when i put him in standby mode by closing the notebook for few seconds and then i click the on button, my screen starts displaying fine until my next reboot and i start all over again ( i usually keep my notebook working almost 18 hours which means there's a lot of time to my next reboot)
- But Today, I booted too many times , it gives me black screen and the standby mode doesn't work anymore. But few times today when i was trying to boot, the screen displayed the Toshiba screen for only 1 second then gone black again.

P.S. You can see hardly threw the black screen everything if there is a sunlight facing the laptop.

Thank you in advance,
Best regards,
Mr. Mher Krikorian

Answer:Black Screen on boot- Toshiba Satellite M70

> You can see hardly threw the black screen everything if there is a sunlight facing the laptop
This is very useful info?
I think the issue is related to the FL inverter?
The FL-inverter is a small part which controls the display backlight.
If this part starts to malfunction then you would see everything like behind a thick fog?

In my opinion the FL inverter should be checked and replaced if necessary?
For that you have to get in contact with an local service technician?

Greets & happy new year!

2 more replies
Relevance 72.57%

I've had my laptop for about 2 years or so, and I've tried turning it on and it comes up with 'diagnosing your pc' for some time, then after a while, it'll proceed to the normal toshiba leading innovation screen and it will stay on that. I've tried it without and with the battery in, and it still has the same problem

Answer:Toshiba satellite won't pass load up screen

Probably too hopeful but as it's easy to try, do this:Turn off, disconnect power and remove battery. Hold the Power Off/On button down for at least 20 seconds to discharge the motherboard components. It has been known at odd times to unstick things.Otherwise let us have your Satellite model number please.Always pop back and let us know the outcome - thanksmessage edited by Derek

5 more replies
Relevance 72.57%

I have a Toshiba Satellite a210-12u which has been quite a good laptop for me. However for qutie a while now it has been going dim after about a minute of loading up. The screen starts as it should do, but then goes dim, like if I had taken the plug out and it was working on the battery. I have however checked the power options and have it at high performance, and also have the display brightness at 100%. Whilst this is not an issue which inhibits my use of the laptop, it is a bit annoying.
Any help would be much appreciated.
Thanks
Danny
 

Answer:Help needed, Toshiba Satellite screen issues

not sure if I can help you with that but did you try without battery / power supply only?
 

2 more replies
Relevance 72.57%

I opened my laptop, pushed the power button, the green power light came on, but my screen did not come on. I have researched and tried several troubleshooting steps, but nothing is working. I now have my battery removed, the power chord attached, and have it hooked-up to another monitor. I turned on the laptop, got the green light, heard it running, and the monitor said "no video." Where do I go from here? Is there anything else I can do before I have to bring it somewhere and pay someone to tell me whats wrong?
 

More replies
Relevance 72.57%

Hello, I think that the video cable of my PC is HS because there is not a backlighting anymore, but it is possible to see the image with a lamp.
Can you indicate me the reference of this cable?
Cordially.
Sorry for my English, I am French and I use an on-line translator.

Toshiba Satellite Pro C70-A-14X
Part no : PSCEBE-002002FR or PSCEBF-002002FR (the label is illegible)

More replies
Relevance 72.57%

sometimes when i power it on, itll give me the options of safe mode and all that. but when i choose to run normal, itll run normal for a second and then it will turn black. it has to be my internal hard drive right? if its displaying at all on my screen like options of safe mode, it stays on the whole time on safe mode. but turns black when i choose run normal

Answer:Black screen on my toshiba satellite latop

If Safe Mode continues to run without crashing or shutting down, there is nothing wrong with the hard drive. A faulty hard drive or motherboard would affect Safe Mode just the same as Normal Mode.When Safe Mode runs okay, but Normal Mode does not, it is usually caused by a bad or incompatible device driver that you've recently installed, or some incompatible software that you've recently installed of the types listed below:Third-party Firewall software.Antivirus software.CD/DVD burning software.Virtual CD software.If you can remember recently installing a driver or any of the above software types, uninstall it in Safe Mode. Then try starting Windows normally.

3 more replies
Relevance 72.57%

I placed my diary on the keyboard of my laptop.
When I lifted it off - the screen was in the negative mode - so whatever the sequence the diary pressed the keys made it as such.
Can anyone tell me what sequence I need to key to return it to normal.
Thanks

 

Answer:Toshiba Satellite laptop negative screen

I connected an exrternal monitor and it works fine
 

1 more replies
Relevance 72.57%

My laptop is working, however when I turn it on it'll show the toshiba logo as it usually would but then the screen will go black with the mouse pad still still working.
This laptop has given me issues prior to this occurrence and I am hesitant to go ahead and use the warranty on it if this issue is fixable.
Any advise would be appreciated.
Thank you.
 

Answer:Toshiba Satellite Radius: Black Screen

The boot hard drive has probably failed
 

1 more replies
Relevance 72.57%

Hi there, I have a Toshiba Satellite A200 and just today I've encountered a frustrating problem. Let's just get a few things out first.

I had intended to turn it off last night, but it didn't shut down. There was some message about a program still opened or something like that (not a big deal I thought as I had gotten it a few times before). I just clicked whatever it was that ended it or turned it off anyways. So today I come back to turn it on and it was on that message. I turn it off and come back later to turn it on. I noticed there was a black screen and I could not do anything. I hold the power button to turn it off and restart it. It loads the Toshiba/Phoenix screen fine. Then I get to the Windows Recovery screen. It gives me two options.

- Use the Windows Recovery thing to try to find and repair any errors
- Start Windows normally

I tried the first option a few times but it said there was an unspecified problem due possibly to some hardware configurations (did not do anything before). I restarted and pressed F2 and looked for anything that might have caused it and I exited without saving any changes (Toshiba/Phoenix thing) and then it led me to the screen with the Safe Mode and other options. I chose Safe Mode just to see and it led me to the log-in screen, but after that it would not let me see those same options again. Anyways, I would start normally and at the loading screen, the bar would load but there is no Vista logo. After that, there's ... Read more

Answer:Toshiba Satellite A200 - Black Screen

insert your windows recovery disk restart the computer then go to system recovery/ repair windows or something similar and have that run, DONT INSTALL WINDOWS! Unless you like loosing your files and re-installing windows vista
 

1 more replies
Relevance 72.57%

Hi

A friend has given me his laptop to try to repair. The screen goes green, blue and pink in a lot of areas and is ok in some. All the pixels appear ok. I've researched and believe it may be the MOBO or graphics card? Could someone please tell me how I can diagnose this error without the need to take it to a pricey repair man!! I am comfortable with the disassembly of computers.

The laptop is a Toshiba Satellite A205-S5804

Cheers!!!

Answer:Toshiba satellite a205 screen issues

Welcome
For starters we have this excellent information
Hardware Diagnostic !! ? Captain Debugger

Run the upgrade advisor to help discover hardware problems
www.microsoft.com/Windows/windows-7/get/upgrade-advisor.aspx

Video card stress test Video Card - Stress Test with Furmark http://www.ozone3d.net/benchmarks/fur/

CPU Stress Test www.sevenforums.com/tutorials/100352-cpu-stress-test-prime95.html

If you can attach it to another monitor, test.

12 more replies
Relevance 72.57%

Toshiba Satellite L755 screen went Black when using pc, tried to restart, no fan sounds or any sounds, Amber light comes on when you try to power up, then goes off. Please help, thanks.

Answer:Help with black screen on Toshiba Satellite L755

A hardware failure of some sort. Could be power adapter - is it the same if run without the main battery?Always pop back and let us know the outcome - thanks

10 more replies
Relevance 72.57%

Hi guys,

got a toshiba satellite pro a200 when i power it up it just goes straight to a white screen
i have reseated the memory one at a time and also reseated the hard drive
but it still does the same

any ideas?
 

Answer:Toshiba satellite A200 just white screen

6 more replies
Relevance 72.57%

OK so this is the main problem: http://500screenflicker.weebly.com/

Any ideas?

More replies
Relevance 72.57%

My P500 has a habit of getting stuck at the Toshiba Leading Innovation screen, sometimes it will go past it other times it won't. I have gone into the Bios and 'load default setup' that will work for a few days.

Taking out the battery helps too. I have run a full hardware diagnostics on the Hard drive and it reports as healthy. It's a stroke of luck if I can boot into Windows.

What would be causing this?

More replies
Relevance 72.57%

Hello,

My laptop since it starts has the screen blank

Screen, flex and inverted have been discarded From an external screen you see And the RAM has no flaws

A little help I'm desperate

regards

More replies
Relevance 72.57%

Hello,
My friend's in the market for a new computer; for various reasons, it looks like Toshiba will be the brand of choice.
(foremost among them being local-area service/support in Indonesia, where she'll be for 3+ years).
That said, the only Toshibas that we've been able to get some hands-on 'look and feel' sessions with were
the Satellites (i.e. the entry-level machines); they were... OK... the build quality felt... well, retail-ish =p
Anyone have experience with the next tier up, the Satellite Pro models?
Presumably the build quality is at least on par with the Satellites; any better? Appreciablly better, that is?
If simply on par, she may as well get a Satellite and take her chances...
Thoughts?
Thanks in advance.

I didn't find the right solution from the internet.
-- Edited by Admin: -- advert links have been removed - not allowed

More replies
Relevance 71.75%

Hi there,

On window 10 My daughter started to get blue screen error message (all differents), and laptop was rebooting.

I tried to reset the laptop to revious setting but it fail and now I can't even access window.

F12 on reboot to get to repair works bur repair fails

I am based in Ireland and have warranty, I assume all I can do is to send it back ?

Regards

Golf

More replies
Relevance 71.75%

hi

I have a Satellite T110-11U that wont boot up is only gets to toshiba splash screen every time i would like to update bios but can only find bios update that is done in window but mine dont get to windows does any 1 no where ican find thebios files i need to update my bios or point me in the right direction

your help is deeply greatful
regards mat

Answer:Satellite T110-11U - Hangs on Toshiba splash screen

hi just letting you know that i had to strip down laptop take of bios battery for 5 mins then put all back together now boots ok now

2 more replies
Relevance 71.75%

upon turning on the laptop the screen will turn white if you hold around the frame in certain areas it will sometimes work but then if the monitor if it is bumped or moved it will go back white....I'm wondering if it is a loose cable issue or something else. Can someone please advise me on this?

Answer:my toshiba satellite l655 laptop screen is all white

You could check the cable connector at the screen end but from what you've said most likely it is a screen fault. The connector at either end of the cable can give issues, as can the cable itself. Mostly the cable goes bad around where it hinges and often when you move the lid down to nearly closed you see the picture come and go or flicker.Always pop back and let us know the outcome - thanks

4 more replies
Relevance 71.75%

hello,

I am having a very annoying issue with my toshiba satellite L755-S5216. It boots up fine but sometimes while im doing work on the computer(just normal schoolwork and such) the screen will go black with a redish line that flickers on the left side of the screen. The only way to fix it is to do a shutdown holding the power button. Is there anyway to fix this...or is it just the inverter that i have read on a few posts on this site?

Thanks
 

Answer:Screen going black on Toshiba Satellite L755-S5216

A laptop repair person can fix this for you. It could be a bad LCD panel
 

3 more replies
Relevance 71.75%

Hi, I have had my laptop for about 2 years now and recently I have noticed that when the screen is dark coloured (like a black background or dark background) purple fuzzy horizontal lines appear on the very top of the screen. Like the top 2 millimeters of the screen.

I also noticed that when i put pressure on the area around the touch pad the whole screen starts to glitch out and go spastic. Like purple lines everywhere. Especially around the taskbar at the bottom of the screen.

If I set the background to white the lines disappear however and the affects of putting pressure on the area around the touch pad are far less noticeable (if at all, I have to test this more)

Also when I plug in an external monitor (VGA) there are no problems on the external screen.

So my question is, has anyone experienced something similar and also would this be a software or hardware problem? And what steps should I take now?

Thanks

Answer:Toshiba Satellite U400 - Purple lines on screen

Sounds like a hardware problem. If the screen garbles when the base is pushed, then the graphics chip is probably faulty. An ASP can quote you a new Mainboard.

1 more replies
Relevance 71.75%

I have quite a weird issue that I haven't encountered before.

When the laptop is turned on, you get the Toshiba splash screen, hitting f2 gets you in to the bios, f12 gets you to the boot menu, both these menus work fine.

However, anything past this just results in a black screen, for example, if I was to choose network boot as the first boot option, or cd-rom, or hdd!

I have tried the following troubleshooting steps

1. Removed HDD/DVD and tried to network boot - nothing
2. Reset BIOS to factory defaults, checked boot items were set correctly
3. Removed ram and fitted known working ram, tried both slots
4. Removed battery and drained the static
5. Attempted recovery of the bios using floppy disk (results in same black screen when trying to boot to it)

No bios updates have been ran previous to this, all the client tried to do was connect the laptop to a projector.

Any Ideas?

Thanks
Jon Roberts

Answer:Satellite A300 - No activity after Toshiba splash screen

Hi Jon Roberts,

Why you want to update the BIOS?

If nothing works after the Toshiba screen it seems to be a hardware malfunction. You should contact nearest authorized service provider to get professional help. The guys can check the notebook and repair it.
Furthermore on the Toshiba website you can find a list of all ASPs.

Good luck! :)

6 more replies
Relevance 71.75%

I apologize as I did not see a different area to post my question so I thought I would post it under the Windows it is running. I apologize in advance if I did it incorrectly and any input or direction would be greatly appreciated.
 
I am no computer geek but I am not a computer “virgin” either. However, I need the assistance of the veteran computer geeks. I have had my Aunts Toshiba Satellite L505D-S5983 for quite some time now and I have been meaning to write and find a place where I may be able to find some direction on how to proceed.
I have done extensive research at one time and found that Toshiba’s were known for “graphic chip issues”. Actually at the same time I got my aunt’s computer, my friends Toshiba had the exact same issue. Lights up but no graphic on laptop or external monitor.
The information I obtained at the time was that the GPU was soldered to the motherboard and I would have to replace the motherboard which was more expensive than buying another computer. So, I looked into the “reflow” process and decided I had nothing to lose so dismantled the one laptop to find that I couldn’t do the reflow because the GPU was locked in with a plastic lock.  This is what brings me to my next dilemma and why my poor aunt has gone without her laptop for the past 8 months. I got so sick of trying to find the information that I just stuck it in a cupboard and went on with all my other demands in life.
However, ... Read more

Answer:Toshiba Satellite L505D-S5983 Blank Screen

It has been my experience that manufacturers (Toshiba in this case) will not sell the graphics chip.
 
You could call Toshiba to see if they have any suggestions, but I suspect they will point you toward a replacement motherboard.
 
Best of luck.

3 more replies
Relevance 71.75%

Hi

I tried to install windows 8.1 after instalation computer reboot. After this reboot i cant do anything computer stuck on toshiba screen (8h ), when i tried turn of and go to bios by pressing TAB computer stucks on bios Version Screen and wont budge :(

Can somebody help me !! PLS

Answer:Satellite M50D-A-10Z cannot boot, stuck on Toshiba screen

To access the BIOS you have to press F2 button immediately after pressing the power button.
Is this possible? Can you access the BIOS?

The notebook seems to be sold without preinstalled OS. How did you install the Windows 8.1? Did you change some settings in the BIOS previously?

3 more replies
Relevance 71.75%

Hi

I have a faulty LCD screen cable, anyone know where in the uk I can get a replacement cable?

Also would this part be covered by a warranty from toshiba seems a bit off for a wire to fail.

Cheers

Answer:Toshiba Satellite Pro C70-A-17l pscefe - faulty LCD screen cable

Hi everyone

my screen seems to be showing faults when I move the screen I have opened the laptop up and the problem seems to be the LCD screen cable.
i have tried google to find the part in the uk but can't seem to find one

can anyone help? Also seems a bit off that this part should break any info on toshiba admitting this might be a defected part?

cheers

1 more replies
Relevance 71.75%

I just installed 4GB of matched Crucial memory (had 256MB). Everything was fine for about a day; left the computer running for about 1/2 hour and when I came back...black screen. Nothing. Finally had to shut down using the power button.

Any suggestions will be gratefully received.

Operating system is XP with pack 3 installed.

Thanks,

Don

Answer:Toshiba Satellite A105 S2061 black screen

Will the system boot properly if the new momory is removed and original memory inserted into system. Also what type memory did you installed (clock speed,SDRAM,etc)

The maximum amount for this particular model is 2GB referring to the Toshiba website.

1 more replies
Relevance 71.75%

I have just replaced the screen of a Toshiba Satellite laptop (A665). The previous screen had been broken when someone stepped on the top of the laptop. Structurally, though, the laptop was just fine. The broken screen lit up in senseless brilliance.

After I replaced the screen the laptop will not power up. I immediately thought it could be: 1) cables came unplugged when I remounted the panel 2) faulty new screen 3) motherboard.

I've really been hoping against motherboard. And something strange is happening that makes me think it might not be the whole board.

The laptop powers on for five seconds, fans blaring and everything, and then shuts off. It almost reminds me of when my Xbox red-ringed and would no longer even start up (finally forcing me to repair it). It does this with the new screen, the old screen, and no screen at all. There doesn't seem to be any difference.

In my experience, when a motherboard goes there's no getting it to turn back on. Which is what confuses me. I'm at a loss here, aside from the thought that it might be the screen cable, and I can't really afford to have a professional take a look at it (as I've already spent money on the new screen).

Any help would be greatly appreciated.
 

Answer:Strange Problem After Replacing Screen Toshiba Satellite

Open the laptop carefully and check for loose cables or damage?
 

2 more replies
Relevance 71.75%

Hey,

This has been happening a lot, when I turn on my laptop nothing happens, it is getting power no problem but doesn't do anything..BIOS..Anything at all

Very annoying because then I lose the work I have open, when I turn it off it goes into hibernation, but sometimes this happens even when it was fully shutdown.

Thakns for any help

Answer:Toshiba Satellite - Sometimes turning on, fan working but just a blank screen

I'm sorry, which is it?

You stated when you power it on, nothing happens and in the next sentence you state its annoying because then I lose work I have open.

when it is on, and you tell it to turn off it goes into hibernation, but sometimes it happens even when it is fully shutdown.

Totally confused, can you break down the issues with a bit more detail.

Whats happening and when

8 more replies
Relevance 71.75%

Hi,
I have a toshiba satellite a70 and i am having the following problem. When the laptop shuts down or even restarts, on the screen where the bios appears, it is black. Let me see if i can clarify. The computer turns on or restarts but the screen is black. I can hear the fans come on, all of the indication lights are on, but the screen remains black. I thought that it might be an LCD hardware prob, so I waited 10 min to see if i can at least here it logging into windows, I even connected it to a seperate monitor. Nothing happens. Here's the kicker. If I were to shut down the laptop and then remove the power cable from the back of the laptop and then turn it back on, it would work fine. It seems as though the computer is not shutting down properly?

Please help, Thanks in advance
 

Answer:Solved: Toshiba Satellite Black Screen Problem

bump. As additional information, i formatted and installed all drivers needed and the problem still persists.
 

2 more replies
Relevance 71.75%

Hi there,
Today my laptop (windows 8.1) ran out of battery. Later when it was charged again, only a black screen with a cursor appears. Additional the power button does not work. When I press the power button the laptop does not shut down nor boot again, just the black screen with the cursor appears again. Alt+Ctrl+Del does not work either... I don't know what I can do else. Can anybody solve this problem?
Thank you very much for your help

Answer:toshiba satellite u920t black screen with cursor

Press and hold the power button - does it turn off and on again ?
if so do three times in quick succession - this should trigger the repair your computer screen - select start up repair - see if this solves the problem.
If you can't get to that point do you have a windows DVD?

1 more replies
Relevance 71.75%

Touch screen not working

Answer:Toshiba Satellite L15W-B touch screen not working

What version of Windows is currently installed?
Also, make sure the driver for the touch screen is installed. You can normally find correct drivers by going on the laptop manufacturers web site and going to their drivers and support section (be sure to choose the correct model of the laptop because many have same name but different variations).

Be sure it's not turned off by some hot key on the keyboard and check device manager to see if it's picking up some sort of input device other than touchpad keyboard.

1 more replies
Relevance 71.75%

HELP!

I had a problem with my adapter plug in my laptop, so I completely disassembled it to check out what the problem was. I put it back together properly, but now my screen does not turn on when I power on my computer! I went back to see if my cables were inputted, and they were! I don't understand why it's not working.
 

Answer:HELP ME! Toshiba Satellite A135-S4666 screen not working!

Can you see the screen if you shine a light on it? I assume it works fine with an external monitor?
 

3 more replies
Relevance 71.75%

When starting up it then get frozen on the toshiba screen so unable to go into safe mode etc...

Can anyone help?

Answer:Satellite Pro L300 freezes on Toshiba Splash screen

Hi

This would mean that your notebook cannot pass the POST (Power On Self Test).

Power on self test is a short diagnostic test which checks the motherboard and the connected devices?
Theoretically everything could cause this issue? faulty motherboard, RAM malfunction, etc?

In your case I recommend removing the RAM modules and to check the single modules.
You can try to remove only one module. Check both modules using this procedure?

Otherwise you will need an help from professional technician? the guy could run some tests in order to find out what part malfunctions..

2 more replies
Relevance 71.75%

My satellite L300 starts up with the Toshiba screen and keeps on starting regularly until I see the blue Windows sign saying Please wait... After that the screen goes black and it switches back to the Toshiba opening screen. I tried going into the system by pressing F2 or F12 but I am a technical noob and that is way to complicated for me.

According to my sister it has something to do with a faulty download and that I have to insert some kind of code in either of the systems (F2 or F12).

Is anyone familiar with this problem and can someone maybe explain to me how to fix this?

Thank you!

Answer:Satellite L300 keeps restarting to Toshiba opening screen

Try please to start notebook in safe mode.
When you switch it on press F8 to enter advanced boot options. There you will find safe mode option.

Wait until windows loads. I hope you will be able to do this.

What you can try then is to roll back OS to earlier time using system restore option.

Please test it and send some feedback.

1 more replies
Relevance 71.75%

Hello All, my laptop has started behaving a little bizarrely! 6 times out of 10 boot ups my laptop screen is white. If I connect my machine to a monitor then my desktop is visible and works perfectly normally? If I restart then maybe my screen comes back, maybe not. There seems to be no reason for it, totally random?? Or is it ??? Could anyone offer any insight?
Many thanks,
Tray

More replies
Relevance 71.75%

Hi, I am running vista basic in a Toshiba Satellite A215 I was uninstalling firefox when my computer stalled. I tried to reboot, the loading bar came up, after that the screen went black with a mouse cursor arrow. I tried safe mode. Same result. I tried "0 + power" method for factory default. Same result. I dont have the recovery cd. Is there any way to restore factory default without it?  Thanks, RayEdit: Moved topic from Introductions to the more appropriate forum. ~ Animal

Answer:Toshiba Satellite Black Screen White Arrow

Possibly useful, http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Unable-to-restore-laptop-to-factory-settings/td-p/311868 .
 
Louis

1 more replies
Relevance 71.75%

Hi,

I have a 2 week old P770.
Last week the Laptop turned itself off all of a sudden.

I was a very hot day - i dont know if this had anything to do with it ? It seemed very hot.
I put the fan on next to the laptop and directed the fan toward the vents. I use the Laptop on a table. When i turned it back on i got the Toshiba Innovation screen and down the bottom it says press <F2> to enter set up or <F12> enter boot menu.

I press F2 nothing happens. I press F12 nothing happens. I press CTRL F2, SHIFT F2, ALT F2, etc etc etc
I gave up and turned off the Laptop waited a while and turn it back on.
I did this a couple of times and eventually it went into what looked like the boot menu and i followed the instructions.

Now this has happened to me a couple of times in the last 2 weeks - but only when i completely shut down the night before.

Now its dont it again this morning and its driving me crazy. Please help !

Answer:Toshiba Innovation screen when turning Satellite P770 on

There is an entry in the Toshiba Knowledge Base dated 16/2/12 about improved fan control on Satellites (no models given) by updating the bios and there is a v1.8 bios update dated 14/02/12. Is this the solution?

3 more replies