Computer Support Forum

e2 fault code on mobo tyan tiger

Question: e2 fault code on mobo tyan tiger

Hello folks wonder if you can help. just got tyan tiger mobo with 2x xeon processors. press start button clicks into life little led counter sticks on e2 and machine beebs.monitor does not come on with a start up screen. got as far to find out cpu's need initualising. no obvious jumbers etc. can anyone help please, David

Relevance 100%
Preferred Solution: e2 fault code on mobo tyan tiger

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: e2 fault code on mobo tyan tiger

please be more specifici did look up some thigns on a board i THINK is yours a product code like Tyan Tiger i7505 or somethingThe E2 code may have something to do with he RAM, its very picky i guess but i cant guarantee this info because i don't know the MOBOs make and model

4 more replies
Relevance 87.74%

So i needed to format my main drive and reinstall windows xp. Everything works until just after the install on the first boot and just after i put in my administrator password the system resets. i remember this happing before when i switched OS's from 2000 to XP. That time i ended up taking it in i remember there was a driver problem and i was given a CD witch i lost. would it be a driver problem because of the 2 processors and and if so how do i solve this?

Answer:tyan tiger k8w s2875 (2 amd opteron)

I rarely ever recommend a BIOS upgrade but, what is your version you are now using?Review the link below.------>GoHere

3 more replies
Relevance 73.8%

Ok. Before I begin, I know a lot of people have had problems in the past. But all forums and threads I read are from 2000- early 2002. I have done SO MUCH to this crap that I don't know what to do. SOMEBODY HELP ME!

Don't think I actually tried? Here're links to the other threads that I went through:

http://forums.techguy.org/t284619.html
http://forums.techguy.org/t286950.html
http://forums.techguy.org/t289255.html

Ok...
When I put this computer together back in September, 2001, I had these components:
Tyan Thunder K7 S2462UNG (Probably Rev. A)
4x Crucial 256MB DDR Reg ECC bla bla RAM
NMB 460W PSU
PNY Verto Geforce3
2x AMD 1.2MP Palomino CPU

Then I started getting blue screens of death ranging from Bad Pool Caller to DRIVER IRQL NOT LESS OR EQUAL to PAGE FAULT IN NON PAGED AREA to KMODE EXCEPTION HANDLING to no-name BSODs.

They said check my RAM, well I bought new Kingston ValueRAM. 4x256's (the ones in the sig). They said the videocard sucks, so I bought a Visiontek Xtasy Geforce Ti4600 AGP 128MB. Then I figured new CPU's so I bought 2x AMD MP 2800+ CPUs. They said the PSU sucks so I bought an Enermax 660W PSU. Then my videocard's fan died, so I bought a brand new BFG Geforce 6800GT that came in today.

I tried to play Doom3 and Roller Coaster tycoon 3 and both gave me PAGE FAULT IN NON PAGED AREA!

NOW WHAT??!?!??!?!?!??!?!?!
I have AMD AGP Miniport Drivers ver. 5.33 from March 2002.
I have AMD Busmaster drivers 1.43
I have Tyan BIOS 2.... Read more

Answer:Tyan Thunder K7...I'm PISSED (Page Fault in Non Paged Area)

16 more replies
Relevance 72.57%

hi,

I bought a PSU which had the correct connectors, but was underpowered, and I want to upgrade to another one, but am not sure if it has the right connectors.

the mobo is an older tyan, and the manual specifies the connectors as

There are three power connectors on your Thunder n3600M S2932-E. The Thunder n3600M S2932-E requires that you have an EPS12V power supply that has a 24-pin, an 8-pin and a 4-pin power connectors.Click to expand...

This PSU has the correct connectors (i think) and just wanted to double check:

1 x 20+4Pin Main Connector
1 x 4+4Pin ATX12V Connector
1 x 8Pin EPS12V Connector
4 x 6+2-Pin PCI-Express Connector
6 x 4Pin Peripheral Connector
6 x 5Pin SATA Connector
2 x 4Pin Floppy ConnectorClick to expand...

can the 4+4pin be used as the 12v 4pin? The one I got before seemed to have the correct connectors:

1 x Main connector (20+4Pin)
1 x 12V(4 Pin) CPU
1 x 12V(8 Pin) CPU
4 x Peripheral
6 x SATA
2 x Floppy
2 x PCI-EClick to expand...

but was underpowered. Anyone have a reccomendation for that mobo? The machine is now pretty old, but still has 8cores and 16gigs of ram, so would like a few more years out of it.
thanks!
bp
 

Answer:PSU compatible with Tyan mobo?

Yes, that rosewill has both the 8pin connector and a 4+4 connector. Your mb needs 3 pw connectors; 24pin atx, 8pin aux, and 4pin aux.

Rosewill is not generally a brand we recommend however if you are not going to stress the pw supply, it should be ok. I have a high end rosewill running on one of my systems however it is not the one I use for gaming.
 

1 more replies
Relevance 70.93%

I have a tyan s2875 mobo with a sata hard drive. When I try to install windows 7 64bit it says it cant find a hard drive. Its done that to me every since I got the mother board. No biggie, I just put in my usb with the drivers and got it to work. Now with windows 7 i cant get it to see the drivers. Am I doing something wrong. I can't find a driver that will work. Any suggestions?

Thanks!

Answer:SATA Driver for 64 bit (Tyan s2875 mobo)

I am using tyan 2885 mother board windows 7 7100. With a highpoint raid card. I am not using on board sata for the operating system hard drive. Try the usb in another port, or try using a floppy drive, even with update not clean install I need to add drivers. using the floppy keeps the install simpler because it lists floppy as A drive the usb is listed at first as c drive, It does install on c drive but it takes time to think about it

9 more replies
Relevance 70.93%

Hi there to all,Does any one have a manual for Tyan SL1832DL or know where i can Get one.I have tried the Tyan website bt it is for S1832DL.Please Help.

Answer:Tyan SL1832DL Mobo. manual required

Check see if it's hear click here

10 more replies
Relevance 54.53%

Brand new PC build, worked fine until half way through windows install then turned off. Now it only turns on from anywhere from 1 second to 1 minute (can get into BIOS) before turning off again.
Removed EVERYTHING apart from CPU, RAM, PSU and behaviour is the same. Tried every combination of ram. With no RAM in at all the power stays on but obviously nothing happens.
I've no other hardware to swap and troubleshoot with so not sure which bit to RMA.
Thanks!!!

Answer:RAM, Mobo or PSU at fault?

Could be any one (or more) of a few things;
First thing I would check is for overheating.
Start by checking the thermal paste is present on the CPU, and making sure that the CPU cooler is fitted properly.
Second option is that the motherboard isn't earthed properly. Check that the mounting points are all present and that the screws are nipped up.
Third, you should be able to check the RAM through Memtest (click here option is that one or more of the components has a fault - a cracked motherboard or faulty PSU are tricky to diagnose without 'spares' to fit and test.
Third

3 more replies
Relevance 54.53%

Intel P3 1.0gb - 256mb ram - mobo Epox EP-3SPATrying to install Win.XP Hdd is recognized in bios on ide1 as is the dvd r/rw on ide2System boots but does not start setup, just gets to a blank (black) screen with flashing cursor.So far have tried:- (a) booting from a hdd which already has XP installed (b) booting from dvd and floppy  (changing boot sequence to suit)(c) changing dvd and floppy drive to known good ones(d) changing ribbon cables(e) setting bios to defaults(f) reseating ram (when the ram is installed in a second pc Memtest86 finds no problemAny ideas welcomed.Thanks

Answer:Is it a mobo fault?

Can you get into windows?

3 more replies
Relevance 53.3%

I'm looking at a friends m/c P4 2.8. With the HDD connected the post screen does not appear, With the HDD disconnected it does appear and will boot to ERD Commander or a boot floppy. the voltage is 4.83V The HDD runs OK as a slave on my P4 3.00 where the voltage is 5.19V Can anyone tell me if 4.83V is too low to run the HDD. Same effect with different HDDs connected. Could it be a MOBO fault

Answer:Power Supply or Mobo fault

What rating in watts is your power supply.These should provide 3.3 5v and 12v - I suspect that the drive is sensitive to low voltages

10 more replies
Relevance 52.89%

my PC did not power up when I pressed power button. The motherboard has lights (leds). turning power on at psu lights up leds. pressing power on pc button fires up the fans for < 1 second and then nothing.fans stop, boot process doesnt proceed but lights remain on board.

So I buy a new psu (another 800 watt). I unplug all but bare essentials on board. same issue. I then take out the 8 pin adapter (so only the 24 pin is connected) and leds remains on and boot up starts (yipee). I then put the 8 pin in again and it fails in the same manner as before.

Gigabyte GA EP45 DQ6 mobo
4 hard drives
2 dvd
intel q550 ( I think)
4 x 2 gb RAM
800 watt psu

any idea where fault lies? I assume board.
 

Answer:PC won't boot... power issue or mobo fault

...then go after the motherboard
 

3 more replies
Relevance 52.07%

This first started out as a problem installing some of the larger programs such has Adobe CS3 and Microsoft Office 2007. I had a seperate thread on that located here: http://www.techspot.com/vb/topic123304.html

After a lot of troubleshooting, I believe that my problem exists in the RAM. I ran the memtest for both sticks of ram individually and they both failed. The first stick will cause my computer to reboot in the middle of the test. The other stick, I will get a message that says 'unexpected interrupt halting CPU0'.

So here's my question: Is the memory sticks at fault or my mobo?
I want to go ahead and ask for advice so I know if I should buy new RAM or get my mobo replaced.

These are my specs for my computer:
AMD Athlon 7750 Dual-Core Processor 2.71 GHz
GIgabyte GA-MA770-UD3
Microsoft Windows XP Home Edition V2002 SP3
Corsair Dual Channel TWINX 4096MB PC6400 DDR2 800MHz Memory (2 x 2048MB)

Can someone confirm that I'm using the right memory? It's not listed on the Gigabyte's website as one of their supported ones, but it also says that many are not listed.

Any help on this would be great. I've tried testing the memory on other slots with same results and tried cleaning it with an eraser.

Thanks!
 

Answer:Memtest failed, Mobo or Memory Sticks at Fault?

Your board specs say PC2 9600 or DDR2 1200 memory, like this:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820227347
 

6 more replies
Relevance 52.07%
Question: fault code 646

fault code 646 occures during windows update and the update fails.does anybody knows what is this and how can i solve it?

Answer:fault code 646

Hi and welcome to TSF there are quite a few suggestions here http://social.answers.microsoft.com/...5-2f4dd57eee8d

1 more replies
Relevance 51.66%

Can any one help me?. For some unknown reason my DVD/RW is not working.I am using XP Home and my DVD is a ?Liteon DVDRW LDW-8515.It would seem that to the computer the DVD unit does not exist, when I went tothe CONTROL panel and double clicked ADD HARDWARE I found that in the list of ?the following hardware has been installed? that the LITEON DVDRW was listed but with a RED CROSS through it. As I continued checking I found that the unit had been disabled CODE 22.What does this mean and how can I get round it?. Weejohn.

Answer:DVDRW CODE 22 fault

Code 22This device is disabled. (Code 22)Recommended resolutionThe device is disabled because a user disabled it by using Device Manager. Click Enable Device. This starts the Enable Device wizard.

5 more replies
Relevance 50.84%

My Canon MP750 has given the fault Code ##356 and will not fed paper from the rear paper 'hopper'
It will continue to fed paper from the bottom cassette when selected.
Does anyone have any advise on rectification of this fault?

Many thanks for any assistance.
 

Answer:Canon MP750 Fault Code ##356

i did a little searching and found this forum that people talked about this problem and ways they fixed it or tried to fix it. some i would try before others but it worth trying to get it working again.
http://www.fixyourownprinter.com/forums/printer/40962
 

1 more replies
Relevance 50.84%

Hi Guy`s U052 is showing in printers LCD and saying= Print Head Incorrect, Install Correct Print Head.The Printer is 21 months old so out of warranty, nothing has been changed since it was last used??Any Ideas why this has come about and how can I correct it?Regards Stu.

More replies
Relevance 50.84%

HP X7T78UA#ABA Notbook/Samsung note 4 N910A Had a similar issue with an identical note 4 that had to be returned for speaker issues. The issue was resolved with a HP tech taking remote control and fixing the problem on the pc. Now HP warrenty says contact paid support. We still have 11 months on the warrenty??? Looking here to see if this common problem has been identified. We tried reenstallin the orbit on the PC and Note no result.

More replies
Relevance 50.84%

error messageQBWFS0-7P88H6-MFPWL1-60XQ03

Answer:hard disk fault code

Hello  pyeface, Welcome to FORUM !!  Whenever the Hard Disk Short/Long DST test fails that indicates that the Hard Disk Drive has failed and that requires a replacement to resolve the issue  HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby Please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media) Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files. You can also refer to the below shown link for further supporthttp://www.wikihow.com/Recover-Data-from-the-Hard-Drive-of-a-Dead-Laptop Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Drives :http://h10032.www1.hp.com/ctg/Manual/c02876562.pdf  You can Check your warranty Here to verify the status and Click Here to order a new Hard Drive  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on... Read more

1 more replies
Relevance 50.43%

Hi, when I put a DVD into the player on my laptop you can hear it spin up;BUT - it doesn't start to play or come up with any menu automatically.When I therefore go open windows mediae player - it says drive can't detect a DVD in the player.It says code 39 fault - driver may be corrupted or missing! : (Says: could not load driver software.I tried the 'click the link' for it to auto look for a solution - but nothing comes up - i.e. no repsonse at all. I also went into the device manager - and asked it to lok for newer driver software - but it caem back saing it had the latest version installed.Anything else I can try as a novice before I get it sent off for repair??Many thanks, T.ps I have 3000 words to finish writing for college before monday - so don't want to risk killing the laptop!

Answer:Problems with laptop CD driver fault - code 39,

No CD/DVD or CD-ROM access is missing error Code 19, Code 31, Code 32, Code 39, or Code 41 Try this if the optical drives are not appearing in My Computer or Device Manager. (This is sometimes caused by the removal of Roxio or other writing software.) click hereDownload XP_CD-DVD-Fix.zip and save this file to your hard drive. Navigate to where you saved it and double click the file to extract the contents. Locate the EXE file you extracted and double click it. A confirmation dialog will appear when the script is done. You may need to reboot for the change to take effect.This utility is only intended for Windows® XP, but also appears to work for Vista and Windows 7. You may need Administrator level access to use this utility. If you do not have Administrator level access, the program will say it is finished, but will not have made any changes.Similar fixesclick here works for vista or XPclick hereor manual fixRun regedit and navigate to registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}. Highlight it and in the right pane, find the Upperfilters and Lowerfilters values. Highlight each one in turn, right click and delete them. Close regedit and restart the computer. If in doubt make a restore point before making changes.

1 more replies
Relevance 50.43%

Need your help guys. Have this fault code and can't log in. Kids put a dang password on it.











Solved!
View Solution.

Answer:Power on password fault code 97025088

 Try >> 28983008 Enter BIOS and disable password. Use the code as old password leave new blank. Save & Exit.

3 more replies
Relevance 50.43%

 SysnativeFileCollectionApp.zip   1.7MB
  2 downloadsI have a PC running Win7 64b that continues to crash (BSOD) after being on for 3 to 5 minutes.  It gives a page fault error and always  
stops on file MFEEACK.SYS.  Gives an error code of 50
 
I've confirmed the BIOS is up to date, as well as all drivers.  System does not crash in safe mode, which makes me suspect drivers.
I try to do Windows updates but the system doesn't stay up long enough, and it doesn't want to load them in safe mode.
 
Any help appreciated
 
JLSINGLER
 

Answer:BSOD with paging fault - error code 050

Uninstall McAfee.  Also, run the McAfee Consumer Products Removal Tool (free from here:  https://service.mcafee.com/FAQDocument.aspx?id=TS101331 )
 
If this doesn't work, post back and I'll run the dumps out of the reports that you've provided (I'm trying to save time here, I just can't keep up with all the posts - sorry!)
 
Don't forget to install another, freshly downloaded antivirus.  And don't forget to check to ensure that the Windows Firewall is enabled.

1 more replies
Relevance 50.43%

Bought this rubbish in UK  5th march 2016 On the 14th march HP Support remotly downloaded new media driver due to not been able to play DVD"s or watch Videos. Then twice in April system has crashed and just froze and no key would work . Contacted HP support who did there thing of removing anything that will make start up longer even though that wasnt the problem but the 2nd assistant did suggest I did component quick  test of Mother Board,Processor/HardDrive & Memory . This I did and all passed,last few days been having slight problems so decided because I had time to do an Extensive System Test ,after nearly 6 hours of the test it came up with the above code  so I contacted HP support who told me that I would have to take back to the store I purchased it from. I rang them and they said they would send away for repair.. I dont want a repaired laptop I bought a new  laptop not a refurbished bit of rubbish I hope that somebody on here is in a position to get this sorted  out or otherwise im taking this to the press  because this product is not fit for purpose.

Answer:fault code OW11BF-82183KXD7WMA-618303

This is a "User to User" Forum so nobody here is in a position to get this sorted out. I am sure the press will be riveted by your story of a company willing to repair your laptop under warranty but that is not good enough. Fascinating reading. Good luck. 

1 more replies
Relevance 50.43%

Tried the soft reset with no difference.

More replies
Relevance 49.2%

Specs:
Win 7 Ultimate x64 from technet
AMD 1055t CPU
8 GB G Skill Ram had problem with one stick, got it replaced. checked new lot with overnight memtest and no errors.
Blue Screens for more than a month.

HELP please!!!!!

Answer:Win 7 BSOD BC Code 50 fileinfo.sys page fault in no paged area

Could you please enable driver verifier?

Using Driver Verifier to identify issues with Drivers

...Summary of the Dumps:
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Tue Jul 13 05:42:37.246 2010 (UTC - 4:00)
System Uptime: 0 days 0:16:28.384
BugCheck 50, {fffff8a1087ade18, 0, fffff80002bc00bf, 5}
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+233 )
BUGCHECK_STR: 0x50
PROCESS_NAME: explorer.exe
??????????????????????????????????????????????????????????????????????????????????????

9 more replies
Relevance 49.2%

Hi,

I'm having problems with a few programs such as Get Connected and PcSync of Nokia PC Suite, Daemon Tools and GTA IV, I get the APPCRASH error saying the program has failed to initialize properly and the details are as follows:
Problem signature
Problem Event Name: APPCRASH
Application Name: GTAIV.exe
Application Version: 1.0.0.0
Application Timestamp: 49189a0c
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a7a6
Exception Code: c0150004
Exception Offset: 00009cac
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 5129
Additional Information 1: 9d13
Additional Information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Additional Information 3: 9d13
Additional Information 4: 1abee00edb3fc1158f9ad6f44f0f6be8
Extra information about the problem
Bucket ID: 1037510633

and for Get Connected:

Problem signature
Problem Event Name: APPCRASH
Application Name: GetConnected.exe
Application Version: 7.1.98.0
Application Timestamp: 498ff73f
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a7a6
Exception Code: c0150004
Exception Offset: 00009cac
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 5129
Additional Information 1: 9d13
Additional Information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Additional Information 3: 9d13
Additional Information 4: 1abee00edb3fc1158f9ad6f44f0f6be8


I tried google but I could only find;
a) people with the ntdll.dll error but not the c0150004 error
b) people with the c0150004 error bu... Read more

More replies
Relevance 48.79%

My screen went dead & the bios fault alrm went off. Two short beeps then one long beep. Looked it up and it says video fault. Took out my graphix card & cleaned fans etc, but still get alarm noise. If I change my graphix card will this solve this fault? or is there some sort of video circuitry on the Motherboard that could have a fault. Don't want to spend money on a new card if the board is at fault - will just get a new system in that case.

Answer:Bios fault code 2 short beeps then 1 long beep - advice pls

Does your mobo have a vga output that you could try?

5 more replies
Relevance 47.97%

Hi,

I have a brand new XPS 15 (9550) machine which I suppose may have a factory defect, but I'd like to try asking here and see if others have similar experiences before sending it to repair.
TL;DR; Issuing a shut down, hibernate or start command makes the laptop go down. Light from the power button goes away. 2 seconds later, the power comes back on and the system starts up.

On delivery, the laptop had Win 10 Pro on it. I want to have a clean install without the bloatware which is often shipped with new computers, so I reinstalled it on the very first day with a USB stick prepared with Windows 10 Pro install media on it. Once installed, I added the WLAN driver and let the machine get all other drivers via Windows update. Once done, I shut down the machine and put it in my bag. So far so good, I thought. 
When i took it of of my bag I instantly noticed that it was hot and that the screen was already at the Windows logon as soon as I flipped up the screen. Logged on and tried to shut it down just to realize that the machine comes back on 2 seconds after completed shut down. I tried this several times to see if it was repeatable, and yes it is. Behavior is same every time. It's the same regardless of choosing shut down, hibernate or sleep. Always 2 seconds after the light on power button goes out, power comes back on.
BIOS wise, 1.2.10 or 1.2.14 release behaves equal. I have tried resetting the BIOS to factory defaults and BIOS defaults as well.
Operating system ... Read more

More replies
Relevance 47.56%

Done two fresh installs of OSR2 and each time it will not pick up the serial mouse.

The ports are listed in device mgr, the PS2 option is disabled in the BIOS, there is no exterior PS2 connector, just a MB option.

Everytime, no DAMN mouse. Under mouse properties in Control panel for mouse description there are four ASCII characters, and they change each time I look at the properties.

I've tried differect mice, different Serial cables, I know it has to do with the ASCII characters under the General tab, but what?

Any ideaa?
 

Answer:Tyan S1571 and No mouse?

10 more replies
Relevance 47.56%

I'm swapping around some old and not-so-old parts to build a computer for my mother. Specs are as follows:

Tyan S2380 mb
Athlon 800 cpu
128mb generic PC-133
Accelgraphics 8mb AGP vid card (that I tried to upgrade to a 16mb TNT2...unsucessfully)
Yamaha sound card
e-tech 56k modem
Deer 250w PS
Western Digital 30gb 5400 RPM ata66 HD
generic 36x cd-rom

As you can tell, this is pretty much a crap system...nothing like my 1.2 ghz Athlon sweetheart. Ahh, but I digress.

Problem #1:
When I first assembled everything (with the TNT2 card), I couldn't even make it through POST. The system would hang as soon as it went through the memory check. Hmm... I went through and tested/removed components until I pinpointed it to the video card. I even have two new ones, and neither worked. The old one still boots (although it's definitely close to failing), so I replaced it and kept going. I checked on Tyan's AGP combatibility list, and they only list Geforce 256 and Geforce 2 cards! *grumble* I had problems with high-end AGP with my G2 card, but all I care about now is basic functionality!

Problem #2:
I'm finally able to detect IDE drives...Oops! I got the HDD and CD-ROM cables reversed. The HDD was on IDE2 and the CD-ROM was on IDE1. Well, I kept booting, just to make sure everything else was fine. After I shut down and changed the cables over, the drives took a LOOOOONG time to detect, then I got a "primary master boot disk failed" error! Go in the CMOS a... Read more

More replies
Relevance 47.56%

I have obtained a used Tyan Tiger MP S2460 Motherboard without the manual. The board is a dual processor capable motherboard and has one atherlon 1.9 GHz processor installed. I was wanting to install a second processor. Does the second processor have to be the same speed as the first? What would happen if the second processor was faster?
 

Answer:Tyan MP S2460 Motherboard

It is not recommended to run two different cpus (even if upping FSB on one) because of instabilities. It can be done in some instances through various means but it is much better to get a MATCHING cpu and avoid any chances at instability or failure. Most mobos don't allow for individual voltage settings on the separate cpus therefore negating the chance to run two different ones. Go to this link and you can get all the info you need about runnung dual cpus:

http://www.2cpu.com

http://forums.2cpu.com/
 

1 more replies
Relevance 47.15%

Hi, just went dual core so i bought a new mother board an ASrock 775Dual-Vista and a new pentium dual core 775 cpu. installed fairly hassle free. But now the cd drive isnt recognized in the device manger it says

This device cannot find enough free resources that it can use. (Code 12)

If you want to use this device, you will need to disable one of the other devices on this system.

this message appears on both the primary and secondary IDE channel i have attached a screen shot to clarify my poor description

Yet again many thanks guys
 

Answer:Solved: New mobo and cpu, Code 10

14 more replies
Relevance 47.15%
Question: mobo beep code

I just realized that I get this one short beep right after I push the power button to turn on my machine. Then it boots up and runs just fine. After looking back through my A+ Managing and Trouble shooting PC book and found out that it's normal to here one or two short beeps that informs me that all is well. I don't remember hearing any beeps on my retail PC's on boot up. Is it me or is something wrong.

Answer:mobo beep code

Look in the back of your motherboard's brochure for details or Upgrading and Repairing PC's 19th Edition. It should be OK, but my mobo had no speaker to hook up so no beeps.

5 more replies
Relevance 47.15%
Question: Mobo error code?

My PCChips M950HLU is giving me fits. I've recently started messing with it again after a long break. When I turned it on today, it just gave me three long beeps with no display at all. What would be the most likely problem to check out on this type of error? It worked just fine last time I messed with it (about a year ago).
 

Answer:Mobo error code?

Depending on what type of bios you have,AMI etc, you can find the different beep codes here -

http://www.bioscentral.com/
You could also try Memtest86 to check your RAM.You can download an ISO image below and create a bootable disk with it.

http://www.memtest86.com/download.html
 

1 more replies
Relevance 47.15%

I managed to make a raid0 but ctrl I does not appear once there is a sata DVD drive attached?I have LSI_1068e_SAS drivers but non are recognised by the install.There are lots of 'non compatible' LSI 1068 drivers on the usb stick,IBM,dell and others.no idea which one to use though?next step is to try an IDE DVD if I can find one or/and make the usb stick bootable and put my win7 on there and try to install without the sata dvd.I though once you made a raid from 2 discs then those discs were 'erased'?one disc of the raid had my installation on it and when I tell the bios there is no raid this installation boots up fine?Both discs are SSD's.Any help or pointers or things to try etc etc most welcome as I am lost right now??????Thanks

Answer:win7 does not see my raid0 on tyan S2696

First thing I would do is forget about RAID 0, it will achieve nothing, especially with SSD drives. RAID 0 is supposed to speed up disk access by splitting the data between the two disk so half is written to one disk and half to the other. In reality the speed up is minimal unless you are reading and writing extremely large files on a regular basis. Because there is no head seek times on an SSD drive, that problem is eliminated.The upshot of this is that if one disk should fail there is no chance of recovery.The fact that you can boot when you tell the BIOS that there is no RAID indicates the then entire operating system is on one drive, not split between the two. Once you have enabled RAID O you need to do a complete re-installation to configure the RAID.I would leave things as they are and use the second drive for storage. Stuart

4 more replies
Relevance 47.15%

Hey,

I AM in NEED of dEsPeRaTe HeLP!

I bought my radeon 9700 from Tyan (www.tyan.com)
and somehow it DoEsN't WoRK!

ie: I can't play ANY GAMES at all, Crashes when I try to start them.


I have updated EVERYTHING on my computer even WinXP SP1 and stuff and this still happens.

some help please?
thx guys

Answer:Help with Tyan Tachyon Radeon G9700 PRO?

oh, I should be more specific.

my comp specs are:
Athlon XP 2200+
512 Corsair DDR
Tyan Tachyon Radeon G9700 (:angry2:)
80gig Seagate (60, 20)

400watts PS
Gigabyte GA-7VAXP - 8X AGP

bla bla bla.
I can't think of anything else right now,
I think the info above should be enough to work with.

Thx guys

3 more replies
Relevance 46.74%

I have already changed faulty RAm and the problem is like boomerand, it gets my blood preasure be high. I attached mini dump file. Any help appreciate. Thanks!!!
 

Answer:Error code 00000050 on new mobo

Go to this Google page for many references to the error code:
http://www.google.com/search?hl=en&q=Error+code+00000050+&btnG=Google+Search&aq=f&oq=

{redoak}
 

1 more replies
Relevance 46.74%

I have a problem with Error code, there are severals but 10000050 is most often.
I attached dump files and txt file from event viewer.

Custom Desktop specification:

AMD Phenom 9600 Agena 2.3GHz Socket AM2+ 95W Quad-Core Processor

GIGABYTE GA-MA790FX-DS5 AM2+/AM2 AMD 790FX ATX Ultra Durable II AMD Motherboard

ASUS EAH3850/G/HTDI/512M Radeon HD 3850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP

Kingston HyperX NVIDIA SLI-Ready 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel

RAM is running on 800 not 1066. Tried to use memchecker and had some problems.

I attached dump file and txt event viewer so any advice would be appreciate.

THANKS !!!!
 

Answer:Error code 10000050 on new mobo

Your one minidumpt cited error 0xA which are strong indications of hardware issues. The problem is that a core Window driver was cited as probably cause which isn't much help.

The other four minidumps were all 0x50. auhma.org describes them as requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).

Again, the driver cited, win32k.sys, is a core Windows driver.

* Why is your memory not running at 1066? Did you set the memory like this or did your motherboard auto set?

* My hunch at this point is bad RAM so run Memtest for a minimum of 7 passes and any errors show corrupted memory that must be replaced. www.memtest.org.

* Also, run chkdsk in your Run Box and if you get no errors in memtest do a full harddrive diagnostics.
 

7 more replies
Relevance 46.74%

I replaced the motherboard with a MSI G41TM-E43, and processor with an Intel E6500. When I start up I get a system configuration error, code purple.

Answer:code purple after mobo change

You have to reinstall the OS. Guess you didn't know you could not swap boards without doing so. None of the drivers presently installed on the hard drive can address the new mainboard.

3 more replies
Relevance 46.74%

Yes, I changed RAM for a new one and still has desktop reboot. It is a nightmare now. Any advice what should I change next? I attached mini dump file. Any help appreciate.

Answer:Error code 00000050 on new mobo

Hello sprinter, welcome to TSF. This could be caused by a bad driver but since I don't know your computer specs have a look here http://support.microsoft.com/kb/894278/en-us.

If you would provide your computer specs we would be able to help you further if this solution doesn't work. Be as precise as possible (e.g. make/model mobo, cpu, ram, etc.).

6 more replies
Relevance 46.74%

Hi, just added some new hardware and now i cant stream DRM protected music or already downloaded protected tracks, im receiving error message number C00D11B1. ive read the Microsoft help but its about as much use as a pogo stick in a swamp. any ideas anyone
 

More replies
Relevance 46.74%

This is probably something stupid I'm missing. I'm building a workstation using a Tyan S2885ANRF motherboard and all the drives are SATA drives. The BIOS sees them, but when I go into the Windows XP pro install, it says that windows can't find any valid drives on which to install.

I thought maybe I needed to load the SATA driver, so I hit F6 when prompted at the start of the windows installer and it asks me for a device driver, but I tried both of the driver floppies the board came with (one says IDE driver disk, the other says RAID driver disk) and it won't load either of them.

Does anyone know what's going on? I have no idea from this point how to get the windows installer to recognize the drives. Thanks in advance for any help.
 

Answer:Tyan S2885ANRF won't recognize SATA drives

JP,

I found a similar problem on another forum. He was using a different MOBO, but the solution may give you direction?
***************************************************************
***************************************************************
Greetings,
Like others, I'm having problems with a fresh XP install on my Mobo and SATA Harddrive. I am able to install and operate Windows 98, just unable to upgrade. I receive the infamous "Setup did not find any hard disk drives installed in your computer."

System Info:
ASUS K8V SE Deluxe motherboard
Seagate ST3160023AS 160 GB SATA hard drive
Windows XP Home Edition (no SP 1)

I have found a page in the manual that says I must use Win XP SP 1 for SATA drives. I have a bootable Win XP disk without SP 1. I'm placing my bets on this. I have to get another copy anyway since Microsoft has wisened up and requires activation.

***************************************************************
WOohOo!! Fixed!

The key was to use the correct version of SATA Driver when F6 is selected. Correct version is VIA VT6420 SATA 2.20

k...time to document everything I did so others can follow quickly:

1. Download VIARAID220d.zip (VIA VT6420 SATA 2.20 file) from Asus website (see first post for link). Unzip and open folder VIARAID/DriverDisk. Run MakeDisk.exe.
2. Ensure SATA Cable is connected to SATA1, not PRI_SATA
3. BIOS Setup
a. Onboard Devices Configuration
i) OnBoard SATA BOOTROM - Enabled
ii) OnBoard Promise Controller - D... Read more

2 more replies
Relevance 46.74%

I've been having a weird problem with my main computer since i got it about a year ago, and after much consideration I think I've found out that it must be ACPI related.

When up and running, the PC is extremely stable, but the problem is at bootup. When I turn the PC on, I get one of the following:

- Hard drives and fans spin up, nothing more happens. Seems like the video card fails to initialize.

- I get as far as POST, then a blue screen.

- The XP logo comes up, but the login screen never shows.

- Seemingly perfect boot, except the sound card is inactive.

- Perfect boot.
Any of these boot options happen totally at random, it's like spinning the ACPI wheel of fortune!

Does anybody have any idea how I can fix this?
System: Tyan Tiger MPX (S2466N-4M) BIOS version 4.05, two Athlon MP 2400+ cpus, 1 Crucial 1GB REG memory stick,
Matrox Parhelia 128MB video card, sound cards: Mackie UAD-1 plugin-card, TC PowerCore and RME Hammerfall DSP.
 

More replies
Relevance 46.74%

Hi

I have a old server PC that I have formatted with windows 2000, mainboard is a Tyan S1867 Thunder 2500. It has USB on board but for the life of me I cant get the USB ports working becuase of lack of driver support over on the TYAN web site.

Any one have any ideas on how I can get the USB ports to work , Im wanting to add a USB keyboard and web cam..

Thx for any help

Link to Mainboard >> http://www.tyan.com/archive/products/html/thunder2500.html
 

Answer:Tyan S1867 Thunder 2500 USB Driver ?

Any one have any ideas , my guess is this Mainboard is not supported by a USB driver for Windows 2000..

If not Im sure a USB pci card will do the trick..
 

1 more replies
Relevance 46.33%

Hopefully this is the right section on the forum, I

Went to jump on my PC this morning and got no response, tried to reboot and nothing. Rebooted it again and got post code 10 (via mobo display) and 4 beeps.

Specs

Intel DZ77GA-70 extreme motherboardI7-3770KASUS AMD 380X12 GB RAMWindows 10Corsair CM550Sandisk SSD for main drive

I searched it up and generic 4 beep post code means "system timer fault" which is non repairable and requires a new MOBO is this correct?

I can't find any info on code 10, for this MOBO.

Tried one stick of RAM in all slots and same result, tried pulling CMOS battery, using back to bios button.

Reseated CPU.

Did a cold hard boot.

All parts are about 7 months old except for the CPU and RAM, which came from my previous pre-built HP tower.

I built it because the MOBO in the HP system died which I first bought in 2012.

Thanks for any help.

More replies
Relevance 46.33%

I recently had to replace my Gateway mobo with this M4A78L-M asus, and the only problem I've had really is that I cannot install my Linksys pci. Under Vista, which I used to run, I had to install the RaLink drivers, and I got that to work. Then I upgraded to Win7 and the OS installed the card itself, without a hitch. Since getting this mobo and reinstalling 7 I can't for the life of me get the wireless card to install. I get a message from device mgr similar to the following: "Windows found the driver software but encountered an error while attempting to install it. Your computer's system firmware does not include enough information to properly configure and use this device. Code 35" going on to tell me to update my bios. I've got the most recent bios from the asus site, I believe it's at 0705, tried different drivers and apps, messed with bios settings, but I can't get it to work. Am I just screwed? Is the only option to try to contact ASUS and pray they solve this issue?

Thx
-Jon
 

More replies
Relevance 46.33%

well the moo is an asus p4s800.. when it starts up all i get is a long beep(around 7 sec) and thats it... no video or anything... anyone got some ideas on what could be fux0red?

its a p4 2.4, geforce 4 TI, 256mb ddr, onboard everything else... any help greatly appreciated
 

Answer:Dead mobo perhaps? help needed with bios code...

Did you check the sticky Read: Beep code list at the top of this forum?

Sounds like a memory problem.
Did you just build this or what? Check every single connector and reseat cards and memory-stick(s).
Some more info is required.
 

4 more replies
Relevance 46.33%

Hopefully this is the right section on the forum, I

Went to jump on my PC this morning and got no response, tried to reboot and nothing. Rebooted it again and got post code 10 (via mobo display) and 4 beeps.

Specs

Intel DZ77GA-70 extreme motherboardI7-3770KASUS AMD 380X12 GB RAMWindows 10Corsair CM550Sandisk SSD for main drive

I searched it up and generic 4 beep post code means "system timer fault" which is non repairable and requires a new MOBO is this correct?

I can't find any info on code 10, for this MOBO.

Tried one stick of RAM in all slots and same result, tried pulling CMOS battery, using back to bios button.

Reseated CPU.

Did a cold hard boot.

All parts are about 7 months old except for the CPU and RAM, which came from my previous pre-built HP tower.

I built it because the MOBO in the HP system died which I first bought in 2012.

Thanks for any help.

Answer:Intel Mobo P.O.S.T Code 10, 4 Beeps, Won't Boot?

UCDHIUS said:

I went to jump on my PC this morning and got no response, tried to reboot and nothing. Rebooted it again and got post code 10 (via mobo display) and 4 beeps.
.....



See: BIOS Beep Codes for Desktop Boards
-- and --
Intel? Desktop Board | DZ77GA-70K | Technical Product Specification (PDF)

page 81 shows the beep codes; pages 83 - 87 show the post codes
I don't see 4 beeps in that manual, 4 beeps is listed in the first reference in the legacy board table. Intel states that the board is no longer supported, so that probably makes it legacy.

The code 10 seems to indicate Resuming from S2
Are there any LED codes?

When you reseated your CPU, did you apply new thermal paste?
You said you tested on RAM in all slots, did you test all RAM in each slot ... or at least one other stick in each slot?

Was there a power outage overnight? The components aren't that old.

3 more replies
Relevance 46.33%

Every time i turn my PC on, it will show post code 40 and my stable 4.6ghz OC will be at stock speeds like nothing took in the BIOS. I've ran countless programs to verify my OC so i'm fairly certain its not the cause. If i reboot my machine, everything comes out fine and ill have a post code of AA which is what i want.

it would be nice to turn on my machine in the morning without having to reboot it after it gets to the desktop. Could this be a windows problem or hardware issue?

thanks for any help.

Answer:Mobo give startup code 40 when booting?

Hi there. I found this page explaining codes with solutions, although not sure if it relates to your problem. Hope it helps you.

Error codes in Device Manager in Windows

8 more replies
Relevance 46.33%

I have been working on building a new Opteron 280 Dual Core - Dual Processor system using a Tyan K8WE S2895 I purchased used off eBay. I have assembled the most bare bone of a system: 1 - Tyan K8WE Motherboard, 1 - 1 GB stick - ECC Registered PC2700 184-pin DDR ram, 1 - Opteron 280 Dual Core, 1 - GeForce 7600 PCI Express X16 256 MB graphic card, 1 - 475 Watt ATXEPS12v - 24 pin + 8 pin split power supply to test out the motherboard for any defects before continuing to purchase parts to build the final system.

I have assembled the system with the Opteron 280 Dual Core seeded in CPU Socket 1 as defined in the manual for a 1 processor system, the ram in the first DIMM slot for CPU Socket 1, the graphic card in the first PCI Express X16 slot and the power supply in the 24 pin + 8 pin split connections. I have attempted to POST the system to make sure the board is not a DOA board and the fan on the processor starts up for 2 seconds the powers back down. The fans on the power supply don't even start.

I have check the motherboard for any damage such as a bad capacitor or leaking capacitor. I have unseated and re-seated the processor. I have no way to test the processor because this is my only Socket 940. I have unplugged the power supply from the motherboard tried it in another system using the split power supply connection, it works so I re-connected it to S2895. I have unseated the ram tried it in another system, it works so I re-seated it. I have unplugged the graph... Read more

Answer:Tyan K8WE S2895 - CPU fans start up then stop

That Tyan is just a bad board. Well known in tech shops.
Regardless, power supply makes no difference for basic driving of a board... there is always enough power from any UL approved one. It is the fancy sudden demands on power that make the differenc.
Messing with a Tyan is a waste of time. There is nothing to learn such as there is with a Biostar, Asus, MSI, Gigabyte...
 

3 more replies
Relevance 46.33%

Hello.

It looks like since i updated Vista with SP1, i'm experiencing paquet loss.
The motherboard is a Tyan 5400xt. (bios Updated to 1.01 - Latest stable)

My cable modem box (ISP one) is on 192.168.1.1.
When i ping -t 192.168.1.1
i have about 30% paquet loss !

I changed the cable, the port on which the cable is plugged.
Disabled IPv6 etc ..

It still happens.

When i do the same test with another computer @home (running vista 32, 3Com chip Lan) No probelm !
Prior installing this 5400xt, i was running a K8we, vista Ultimate x64 SP1 same cable, same switch port : No problems at all.

So i suspect some bug / incompatibily with this Lan chipset and Vista.
I'm running MS drivers because i cannot install the latest Intel Lan drivers.
When I want to install them, it stops with a "software not compatible with this version of windows".

Here are my plans:

Boot a linux live Ubuntu : ping -t and see if it'shardware related or soft.
Then (i suspect soft) Reinstall Vista from Scratch. Update just before SP1.
Install Latest Intel drivers ( i was able to install them prior applying SP1, but after SP1 it starts to behave strangely and when i wanted to uninstall these drivers to test with MS drivers i was not able to uninstall - software incompatible with this version of windows).

Any advice / idea welcomed.
Regards.

Answer:Intel Lan - x64 ultimate SP1 - Paquet Loss. (Tyan 5400xt)

minirecif,

Before you get too excited about packet loss pinging 192.168.1.1, why don't you ping a host on the internet somewhere and see if you see any packet loss there. Try pinging "apple.com" and tell us what you get.

S-

4 more replies
Relevance 46.33%

First my specs

Win XP Pro SE
AMD athlon xp 2000+
1.67 Ghz
256MB RAM
80 GB Hard Drive
DVD RW
CDRW
ACER AL1912 Flat Monitor
NVIDIA RIVA TNT2 Model 64/ 64Pro
Philips Ultimate Edge 5.1 (which now won't work thanks to trying to install radeon**see other thread!)

I want to Install a Tyan Tachyon G9600Pro Radeon 9600 Series

these following numbers are on the board itself.
S/N TQ39629000162
L40A1K002C4

I have tried the following steps.
1. Uninstall NVIDIA RIVA TNT2
2. Install Direct X 10
3. Install latest SIS AGP drivers (GART)

Restart Computer

NOTE: When restarted the computer detected the NVIDIA RIVA Hardware and
may
have installed the software automatically, before I turned it off
again?
This is the only possible thing that could have went wrong? But I don't
know
how it found the drivers since I uninstalled it!

Turn off Computer

4. remove static from body
5. Remove all connections to the PC
6. remove static from self again to be sure
7. Remove old NVIDIA RIVA TNT2 hardware
8. Install G9600Pro Radeon 9600 Series
9. Close up computer and reattach all cables
10. Turn PC on.
11. Immediately on boot up screen things look wrong. Zeros everywhere.
12. WIndows loads up with lots of lines on the screen
13. I install the software provided from the site but windows detects
Radeon 9600 series too, anyway
14. After full installation a restart is prompted
15. I restart but this time the screen is split into two different
i... Read more

Answer:video card tyan radeon 9600 cannot install

The Nvidia drivers are still there because you didn't uninstall them. I suspect you tried using the Device Manager instead of the Add/Remove Programs utility in the Control Panel. Using the Device Manager only disconnects (for lack of a better term) the device from the driver. As soon as you reboot the PC, Windows will reinstall the existing driver, as you have already discovered. Even if you physically remove the card, the driver is still there.

I suggest you uninstall ALL graphics card drivers found in the Add/Remove Programs, reboot, and when Windows want to search or install a new driver, just cancel and install the ATI driver.
 

9 more replies
Relevance 46.33%

i have just ordered 64gb of ram for this beast of a mobo!

Will i need more than 64gb for dx12 when it comes out ?

Answer:Tyan S7002AG2NR Intel 5520 1366 x 2 Motherboard help

What does onboard RAM have to do with DirectX. Assuming DX12 means DirectX 12. Shouldn't you be more concerned with what Video card you are going to use? A quick Google shows that board as only having 1 PCIe x16 slot, so no SLI or Crossfire for you I guess. Nice board by the way but isn't that a bit of overkill for a desktop gaming PC. I assume gaming as you mentioned DX12, or are you into video editing or something similar?

5 more replies
Relevance 45.92%

Hey Guys
My mate bought a set of 8gb (2x4) F3 12800CL9D- 8GBXL and later decided to get sniper series. he waited about 4 months to change his mind but hadn't started his built yet.

I agreed to buy it off him for 40bucks still sealed.

I have the same memory in my current setup with Asrck z68 extreme4

The system has crashed a few times and BSOD as well since adding the extra memory.

Ran MEMTEST86+ for 14hours and no dramas. All good. As soon as i booted up windows again i get a 45error code in the motherboard debug. I took out the 2 new sticks and it booted fine.

The timing and voltage setting is still default. Is it necessary to make changes to the timing and voltage settings in the motherboard BIOS?

Some minidump files
030212-12729-01.dmp
030412-10374-01.dmp
031212-10327-01.dmp
thanks

Answer:Z68 asrocks mobo debug code 45 after extra ram sticks

Hi


For first step just,


Remove Mcafee from your system,restart.



Run the Mcafee\cleaner to clean any remaining mcafee fragments,restart.



Download and install Microsoft Security Essentials with windows firewall enable.



Finish with the above steps and post back with results\news.

8 more replies
Relevance 45.92%

Hey guys, I'm hoping someone can come up with some ideas here..

Just purchased a tyan S5396 (Tempest 5400XT).
Dropped it in, with 2 Quad Core intels, 4GB of Ram (crucial), and 2 Western Digital 750Gig Sata-II drives. Also, I have tried a SATA DVD writer (LiteON) as well, but I will get to that in a minute. I'm running BIOS 1.01

In BIOS I turn on RAID in the ATA controller settings. I reboot, and configure the RAID bios for RAID 1 in an array called VOLUME01. So far things are good.

So using the SATA DVD drive, I pop in my new Windows XP SP2 disk (32bit) and away we go.

I press F6 to load the RAID drivers from the Tyan website, and pick any of the 4 options available. Mind you there is only 1 RAID option that doesn't say "Mobile" in it. With any of these drivers loaded I get a BSOD 0x7b - Disk controller driver issue.
Fine..

I pull the SATA DVD on a hunch and put in a PATA CDROM drive from another computer.
Load the RAID driver and this time no BSOD, YEAH!

However now the XP setup is claiming that it couldn't find and hard disk drives installed on this computer.

I have also tried turning off raid and just using the 2 disks as regular SATA drives..

Same issue...

This is supposed to be a server class board, so I would have figured RAID wouldn't be an issue. Any ideas on this?

The driver options are as follows:
Intel ICH9 SATA AHCIController (Desktop ICH9R)
Intel 82801HEM SATA RAID Controller (Mobile ICH8M-E)
Intel 82801HEM/HBM Sata ... Read more

More replies
Relevance 45.92%

Hi,

going to make a system with the above board and two processors, and either a 8800gt or 9800 gtx+.

Would this power supply be a good choice?:

http://www.lambda-tek.com/computing/pcdesigner.htm

If not, any suggestions would be appreciated.

Finally, I have heard that these processors can be quite hot - would anyone care to recommend fans to use for these?

thanks again,

gubar
 

Answer:Power supply for Tyan Thunder K8WE and 2 x Opteron 208 (also, fans)

Your link doesn't provide any info...
 

5 more replies
Relevance 44.28%

When trying to update via Windows Update I got the above mentioned fault announcement. Network is working properly. Windows update problem solver doesn't solve this problem. What to do? Thanks! 

More replies
Relevance 44.28%

I have Windows 7 home installed on my Aspire one, I have tried to instal an IP security camera but I k
keep getting "Sorry. Your system seems to no have libRCodec.dll.
Having carried out a search on the web RegCure offered to rectify the issue,
Naving Purchased,installed and tried the software I have found no improvement and as such contacted RegCure requesting a solution or my payment back. However j
if anyone has come across and resolved this problem I would appreciate your help.

Thanks

Peter Hargrave

Answer:Fault code "system seems to no have libRCodec.dll."

Please update/complete your pc specs.

3 more replies
Relevance 42.64%

Hi, just about November i had to take my Lenovo G580 to Curry's/PC World, now it went in for Warrenty Repair on the Charging Port *Randomly stopped charging* turned out to be broken??... so anyway about 12-15 days down the line i had picked it back up from the shop and was all good until the other day i went to watch a movie via HDMI to TV and it doesnt work.. Laptop screen goes black then comes back then nothing on TV screen dosnt make a noise like it used to when HDMI cable was plugged in, it makes the noise when it is unplugged though, Ive tried this on a couple of Tv's and used different HDMI cables which all work as new, I have also checked ports on tv with different laptop and ports/cables work fine so it must be the laptop, now here is the thing i have checked all drivers and they are updated i even reinstalled the Graphics Drive and still nothing, I have been going mad and even Full wiped the laptop with the Settings thats the laptop gives you and it still dosnt work... the Laptop came back from Lenovo with 6months extra warrenty on it but i think this is just for the part that they have replaced? but surely it should be covered if this has been damaged at service centre (lenovo), Thanks.

Answer:Laptop = Charger Fault (Repaired @ Lenovo) = Fault with HDMI Now...

Anyone out there? Does this Forum not support people that has purchased Lenovo goods?...

1 more replies
Relevance 42.23%

Help please! I'm using AOL 7.0 and IE 5.5. I've been getting the following error messages a lot:

WAOL caused a stack fault in module <unknown> at 0000:00000003.
Registers:
EAX=00000000 CS=0157 EIP=00000003 EFLGS=00010212
EBX=00000005 SS=015f ESP=03d1fba0 EBP=00000230
ECX=80d9f9bf DS=015f ESI=00000001 FS=2957
EDX=00000000 ES=015f EDI=c23b36a0 GS=0000
Bytes at CS:EIP:
00 65 04 70 00 16 00 a3 09 65 04 70 00 f4 d3 0d
Stack dump:
c23b36a0 00000230 00000001 713d0000 03d1fbf0 00000000 713e2dc1 713d0000 713d82e5 713d0000 00000001 00000000 00000001 713d13e4 713d6b6b 713d0000

WAOL caused an invalid page fault in
module KERNEL32.DLL at 0157:bff88a37.
Registers:
EAX=00000000 CS=0157 EIP=bff88a37 EFLGS=00000246
EBX=00000000 SS=015f ESP=03d1fbbc EBP=03d1fbec
ECX=71425378 DS=015f ESI=71425378 FS=2957
EDX=c0022798 ES=015f EDI=00000001 GS=0000
Bytes at CS:EIP:
a1 b8 19 fc bf 50 e8 9a b6 fe ff ff 76 04 e8 92
Stack dump:
71425378 7140fee2 71425378 00000001 7140f4e2 713d13f0 713d6b96 713d0000 00000000 00000000 713d0000 817134a0 03d1fdb8 bff7c00d 713d0000 00000000

This also occurs when using IE itself instead of AOL, except of course it says IE caused...blah blah. After closing the error boxes, I get a white page saying "page could not be displayed". This seems to occur exclusively when trying to log on to an account or going to the checkout page when buying something online. I'm also unable to download active x controls because, according to a box ... Read more

More replies
Relevance 41.82%
Question: tiger

i am trying to play tiger woods 2005 with my son .but we are having difficulty trying to connect together. i have entered the ip address and pressed the host button but we cant connect. would be grateful for any help on which way to do it correctly. ingadora

Answer:tiger

Do you have a software or hardware firewall installed?Can you connect your computers across the network otherwise?

7 more replies
Relevance 41.41%

hey guys not sure if this belongs in this forum but i just got a blue screen with this error up after trying to connect to a wireless network. going through the event viewer i have the following details

Error code 10000050, parameter1 a50773d0, parameter2 00000000, parameter3 ad0931bb, parameter4 00000000.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.


0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 35 1000005
0020: 30 20 20 50 61 72 61 6d 0 Param
0028: 65 74 65 72 73 20 61 35 eters a5
0030: 30 37 37 33 64 30 2c 20 0773d0,
0038: 30 30 30 30 30 30 30 30 00000000
0040: 2c 20 61 64 30 39 33 31 , ad0931
0048: 62 62 2c 20 30 30 30 30 bb, 0000
0050: 30 30 30 30 0000


if anyone can shed some light on what happened id be grateful

thanks

More replies
Relevance 41.41%
Question: Tiger Direct

How do you guys rate Tiger Direct?
 

Answer:Tiger Direct

8 more replies
Relevance 41.41%

didn't see a Mac area so here goes

Trying to get Open Office and GIMP installed on a new iMac (not a new, new one though). just updated to 10.4.3, and I can't get X11 working. I downloaded the package, and Tiger won't let me install it.
I get a message saying 'newer software is aleady installed on the drive. Yet when I tr to run GIMP, it tells me Apples X11 is needed.

Anybody know whats going on?
Thanks.
TLK
 

Answer:X11 issues in Tiger...

Yup. You need to install X11 from the Tiger CD. That is the latest version of Apple's X11.
 

5 more replies
Relevance 41.41%
Question: Tiger Direct ?

Hello everyone. I wasn't certain where to put this so I figured this was the best place...if not please tell me where this should go.
I am looking to build 2 mayby 3 new pc's for the office and TigerDirect.ca has a good offer. My questions is "Has anyone had any problems ordering from TigerDirect and is the product delivered matched to product ordered.?"

Any and all imput is welcomed and if anyone know of any other Canadian site that are reliable I would really appreciate it.

Thanks
Louise
 

Answer:Tiger Direct ?

16 more replies
Relevance 41.41%
Question: Tiger Woods 99

When I play Tiger Woods 99 with the 3D accelerator turned on the game runs slowly and jerks. This obviously means that I have to turn it off again to play. I can't help feeling I'm missing out on some quality. I have a Pentium2 350mhz, 192mb of RAM and a Diamond Viper V770 32mb graphics card.
 

Answer:Tiger Woods 99

I've heard people say to turn down (or was it up?) hardware acceleration:

Start-Settings-Control Panel
Double-click System
Performance tab
Graphics button

Hope this helps.

------------------
~dreamboat~
Brainbench MVP for Microsoft Word
http://www.brainbench.com
 

1 more replies
Relevance 41.41%
Question: Tiger woods 08

I just installed Tiger Woods 08 on my HP PC (Brand new duel core) that runs windows Vista and I keep getting a message that I have to insert the cd. When I do windows tells me it the wrong cd. The game installed with out a problem. Any one know what's up?
 

Answer:Tiger woods 08

7 more replies
Relevance 41.41%
Question: Tiger computer

I have a tiger computer that im trying to restore the operating system on. It belongs to someone else who never got any documentation or disks with it. It looks as if the restore image is located on a seperate partition on the hard drive but I can not figure out how to boot to that partition. There is no message at startup indicating how to enter the restore feature. Has anyone had any experience with these computers ? I believe the model number is syx bio-em-83848 but I cannot find any information on the web. Thanks in advance.
 

Answer:Tiger computer

7 more replies
Relevance 41.41%
Question: Tiger Direct

A friend is thinking of buying a computer from Tiger Direct. I know nothing about them. What do you think?

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1209446&CatId=1344
 

Answer:Tiger Direct

I don't get it. How is that link supposed to answer my question?
 

18 more replies
Relevance 41.41%
Question: tiger direct?

do any of you guys shop at tigerdirect.com? They have cheap prices but ary they reliable? I was thinking of buying a barebones kit from them. If they are not reliable or have bad products, where else can i go? where do you guys go to but cheap computer stuff?

Answer:tiger direct?

I heard on another forum that they have one of the poorest reseller ratings. I wouldn't buy from them.

Newegg.com on the other hand have an excellent reputation for customer service and reliablity.

EDIT: Well i found their rating... here's the link for it. Doesn't seem to be that horrible, but still I wouldn't trust buying from them unless it was like a mousepad or a cheap mouse or similar.

http://www.resellerratings.com/seller1983.html

9 more replies
Relevance 41.41%

Cant seem to get "shot calling" or wagering to Work, my "black" button is fine because I can add spin etc.

Do you have to be in a certain game mode to access these features?
 

More replies
Relevance 40.59%

Hello,

Sr. Citizen now, and I'll tell you; this stuff doesn't get any easier.
I've gotten such really great help here in the past, let me take the liberty of asking this too. Great Forum; tremendous asset.

My HP Pavillion's Desktop HD has conked out after about 3 yrs, and as I don't really feel up to replacing the HD, etc., I'll be getting a new one.

Read all the reviews can make one crazy.
Seems like no one really likes their Dell, HP, Gateway, etc. Or any !
Can go up to about $ 700 for a new Desktop.

All in all, it seems as if ASUS has about the best rep. these days per many reviews I've read ? But, there have apparently been many "piece of junk" comments also
True ? Comments ?

Anyway, would also appreciate any comments on NewEgg or Tiger Direct as to buying a desktop ? Warr., how hard to return in practice, etc. ?
Which has the better rep. ? Why ?
Or, anyone else, perhaps ?

Does it make more sense to buy from ASUS directly; I think you can ?

Again, much thanks for all the help; both now and in the past.

Bob

Answer:Tiger Direct, NewEgg ?

I've heard from a very good and well informed friend that ASUS is one of the most reliable ones because they make their own motherboards. If you are looking for great customer service though, I'd personally recommend Dell, my brother has had a dell laptop for 4-5 years and their customer service is amazing, they come within 1-2 days to fix any problem he has had.

9 more replies
Relevance 40.59%
Question: tiger woods 2006

does anyone know weather the hackers round and the amateur tour in the pga game mode is supposed to have commentary.ea sports support as per usual isnt any good.got up to date drivers on g/c and s/c

Answer:tiger woods 2006

Hi SopwithThe commentary starts in later rounds of the gameSteve

2 more replies
Relevance 40.59%

What makes windows 7 premium full only $109 at tiger direct. There's no picture of the actual box like everywhere else.
 

Answer:windows 7 from tiger direct

That's about right for an OEM license (NewEgg has it for $104 for example).

Bear in mind that the OEM license limits (in theory) installation to the original machine upon which the OS is activated (i.e. you're not supposed to later re-install it on a physically different machine, even if you remove it from the first machine). Where as a non-OEM license permits transfer between machines.
 

3 more replies
Relevance 40.59%

I have a friend who has a Mac w/ the Tiger OS. When she send a Word file, the people she sends it to cannot open the file. She sent one to me and it shows up as a .dat file.

What is the fix for this?
 

Answer:Mac Tiger OS and Microsoft Word

She needs to save the file as a doc file before she sends it.
 

1 more replies
Relevance 40.59%

Has any tried running Tiger with VMware yet? I'm trying to get it going but i'm not sure how I can install the OS on a virtual disk.

Once i can get that going, I know how to make a virtual disk and run things from there.

But does anyone have any clue how to set up tiger-86 for VMWare folders?
 

More replies
Relevance 40.59%
Question: tiger woods 2010

have tried this question on games forum no repliesare pc gamers once again being left out is there to be no pc format of the above game

More replies
Relevance 40.59%

I posted this earlier at the Toshiba forum, but from what I've seen no one is wanting to answer too much on anything over there. Vista Forums seem to have a lot of quality people helping others, so here goes....

08-23-2009 03:06 AM
I am working on an A300-1J1 (French Keyboard & Vista 32). The machine is owned by a member of my family, and when I got it it was totally down due to virus contamination. I started out getting the system virus free and by using Bit Defender, Avira Rescue and Trinity Rescue Disk, I managed to get it to the point where I was not finding any malware, but still couldn't boot due to files being trashed by the various malware that had been picked up. The machine was so hard down that it would BSOD almost contiously on a boot or would hang in the welcome screen. I removed the hard drive and put it in a USB Sata external unit and then did a Avira check and it told me that the unit was clean, I then did a chkdsk /f /r and had 5 files that had been damaged and were repaired. I then did a defrag and re installed the drive and it boots fine, but i cannot seem to use any of my USb flash drives or my USB sata eternal units on it. It keeps trying to install USB Controllers and Intel USB Devices, but it tells me that when I plug in a USB flash drive or a Sata drive that it doesn't recognize the peripheral..... I am running another AV check on the unit now and a... Read more

Answer:I feel like I am riding a tiger

It sounds like it would have been easier to clean install Vista, no? Nonetheless, I like your spirit. If you're missing discs, by the way, the Vista Anytime Upgrade disc can be used to clean install (there is a torrent for it, I suggest backing up the activation key first), and recovery discs can be downloaded quite easily (Google should point you in the right direction, I don't believe they are different for different models/manufacturers).

Here's what I found on fixing problematic USB drivers in Vista. Basically, the file responsible for locating the drivers is corrupt. You need to delete it (after applying the proper permissions) so that Vista will recreate it. Check out the link for the entire process.

Umm... Regarding the French, if I understood that it's a problem, Vista very easily switches between languages. Win+R, type intl.cpl and press enter (Control Panel>Clock, Language and Region>Regional and Language Options). Go to the Administrative tab, and click Change system locale... I believe this changes the language of Windows (restart required). Also, even though your keyboard may not show you the letters you're typing, but if you touch-type, you can easily manage the input language of the keyboard under the Keyboards and Languages tab. Having a picture of the QWERTY layout usually helps out a lot if you need to find what letters are where.

5 more replies
Relevance 40.59%

Hi guyz

I have TW 2004,5,6,7 & 8.
2007 & 8 run fine.
2004,5 & 6 wont run

I have Home Premium 64bit
System is all updated.

How do I install 04,5 & 6 plz?
2005 is my fav game.

Even Coursedownloads. com guyz cant help, it was them that told me about you guyz

PLZ help I am a Computer knumbnutz so keep it simple plz

Regards

Normz

Answer:Tiger Woods PGA TOUR

Hi,

Try the answer here: -

Tiger woods 2006 & Worms 3d & Fifa 2006

2 more replies
Relevance 40.59%

can anyone please advise me on running tw08 with windows 7.
thanks
derek

Answer:tiger woods pga tour 08

Right click your game shortcut.
Choose properties.
Choose Compatibility Tab.
Put check mark in "Disable desktop composition"
Click apply and ok.

3 more replies
Relevance 40.59%

I just got DSL from Qwest and they gave me an Actiontec DSL modem with wireless gateway. Since I have two computers, a Gateway Essential from 1998 running Windows 98 and a brand new iMac G5 which has a built-in wireless card they connected the modem to the gateway. I can access the internet on both computers just fine. However I want to be able to share files between the computers. I have no idea how to set up the network on windows 98. I went into control panel and then network and I have Client for Microsoft Network installed and I also checked the File and Print Sharing ability. What else do I need to do?

Answer:Networking Windows 98 & MAC OSX Tiger

Quote:




Originally posted by novacaine98
I just got DSL from Qwest and they gave me an Actiontec DSL modem with wireless gateway. Since I have two computers, a Gateway Essential from 1998 running Windows 98 and a brand new iMac G5 which has a built-in wireless card they connected the modem to the gateway. I can access the internet on both computers just fine. However I want to be able to share files between the computers. I have no idea how to set up the network on windows 98. I went into control panel and then network and I have Client for Microsoft Network installed and I also checked the File and Print Sharing ability. What else do I need to do?




Hope this helps...

How to

1 more replies
Relevance 40.59%

Get ready. From today, in four days, windows will become OBSELETE to the power of MAC OS X TIGER. Myself, I am a windows user. I like windows. But MACOS X TIGER is going to blow away windows to peices. Dashboard has widgets built in. Bonjour is the communication powerhouse thing. Xgrid for a supercomputer. 64-bit ALPHA compatability. Billed as the most advanced OS, it may blow away windows. It can even talk to windows computers.

Sorry about the rambling. Please comment.

Answer:Mac OS Tiger is going to KILL windows.

Costs how much? That'll keep comsumers away

9 more replies
Relevance 40.59%
Question: tiger woods 2005

my computer keeps crashing when playing tiger woods 2005 i can play it for five minutes then it crashes, i have windows xp home edition
 

Answer:tiger woods 2005

6 more replies
Relevance 40.59%

Hi,
I am receiving a "CANNOT LOCATE DVD ROM" error message for Tiger Woods PGA Tour 07 even though the DVD is currently in my "E" drive.

I played this game on this computer as recently as last year, but due to a virus, was forced to reformat my hard drive.

My specs are:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.20GHz, x86 Family 15 Model 4 Stepping 1
Processor Count: 1
RAM: 2046 Mb
Graphics Card: RADEON X300 Series, 128 Mb
Hard Drives: C: Total - 305234 MB, Free - 258642 MB;
Motherboard: Dell Inc. , 0U7077, , ..CN481114AI00L1.
Antivirus: Webroot AntiVirus with Spy Sweeper, Updated: Yes, On-Demand Scanner: Enabled
2 LG DVD RAM SUPER MULTI DRIVES

Since the reformat both these DVD drives are having great difficulty playing EA Sports games. Watching movies and playing CDs is no problem, but most of my game discs--which worked fine before the reformat--no longer do.

The discs themselves are fine as I installed them on another computer with no problem.

They just are no longer playing on this computer.

I have tried multiple installs and uninstalls using each drive all with the same result.

Before you ask, I am using the original discs with CD KEYS -- No cracks.

Not sure what to do next. Any help would be greatly appreciated.

Regards,

goaliefn
 

Answer:Cannot locate dvd rom -- tiger woods 07

7 more replies
Relevance 40.59%
Question: Tiger Woods 2007

Hello everyone! I have an HP vista 64 bit laptop. I am trying to play Tiger Woods 2007 with my new Logitech Rumblepad2 and I can't get it to work? I have downloaded the latest version from Logitech and still nothing. Everything I see says that my controller was installed corrrectly. Can anyone help me? thanks

More replies
Relevance 40.59%
Question: tiger woods 2005

I have this game and it says that I must have a pentuim 2 500mhz. well I meet this requirment by having a pentium 3 at like 700 mhz. now the problem is that when I go to play the game I can't read what the game says. I get to the main menu and all the boxes are black and I can't tell what the heck it says. any help?
 

Answer:tiger woods 2005

10 more replies
Relevance 40.59%
Question: Tiger woods 2005

Strange thing happened on the way to the golf game. I have played this same game the 2004 version for a year now on this puter. Now I have the 2005 version which has the same system requirments as the okd one. However I cannot start the game I get an error message that says Display Memory not enough. The requirment is for 16mb video card and is the same as 2004 which as I said I still play?? Help Anyone

Answer:Tiger woods 2005

I doubt they are precisely the same. Contact technical support (EA?) and see if your system is compatible. There's more to videocards than just the amount of memory.

2 more replies
Relevance 40.59%
Question: Tiger Woods 2004

Hi all,

Just a question I'm not really expecting a fix.....I have downloaded the Demo version of Tiger Woods 2004 to see what it is like before buying it. But for some reason as the program is loading it suddenly stops at the same point every time and returns to the desktop. I have played Tiger Woods 2002 & 2003 with no problems at all and the system requirements appear to be the same for 2003 as for 2004, has anyone any ideas why this may be happening??? As you will see my system is not the most powerful thing around and I am wondering is my system up to running the program.
Thanks

Wizzkid
 

Answer:Tiger Woods 2004

7 more replies
Relevance 40.59%

When I put the dvd in the drive, nothing happens. When I try to install from the E:\ drive I get the error E:\is not a valid win32 application. Please help
Bart
 

Answer:tiger woods 07 dvd game for pc

Does the computer have a DVD drive? It was an option component for the system listed in your profile.
 

2 more replies
Relevance 40.59%
Question: tiger woods 2000

Could somebody please help me.I've just purchased tiger woods 2000 for my nephew.But the guy in the shop said that we might not be able to play online as he wasn't sure if the server was still active.Does anybody know if this is right ?.

Answer:tiger woods 2000

patchs click hereand as far as i know pga2000 is compatable to play online as 2001 click here

2 more replies
Relevance 40.59%

I play madden 2005 online with PS2 all the time. But when i try to play tiger online it fails. It loads the lobby of people who are playing but when i try to actually play it always says can not connect to peer. I have my ps2 hooked up from my router. Im wondering if this has anything to due with closed ports or something like that. Does anyone have any ideas or had similar problems. thanks
ross
 

Answer:Tiger Woods PGA 2005

ok i read this on EA's site:

Unfortunately, EA has become aware that people that have a DSL Connection with a PPPoE protocol can play the tournaments, but the competitive multiplayer portion of the game will not connect. Unfortunately this is an issue with the software and there are a few workarounds. You should still be able to play this game with a dial-up connection, which most DSL providers include with their package deals. Also, if you have a router, you should be able to put your PPPoE settings into the router so that you can set the internet information on you memory card to Auto, which will allow the Playstation 2 to connect to the online multiplayer portion of the game..

PPP0E:

(Point-to-Point Protocol Over Ethernet) A standard for incorporating the popular PPP protocol, widely used for dial-up Internet connections, into a cable modem connection that uses Ethernet as its transport to the carrier's facilities. Used by a large number of cable modem providers, PPPoE supports the protocol layers and authentication widely used in PPP and enables a point-to-point ( Peer to Peer) connection to be established in the normally multipoint architecture of Ethernet. A discovery process in PPPoE determines the Ethernet MAC address of the remote device in order to establish a session

does anyone know how i can do this?
 

2 more replies
Relevance 40.59%

as anybody had any problems with the game crashing during play, i have tried all the usual. i can only think its my graphics card now.nividia g force fx 5600 128mb

Answer:tiger woods 2004 for pc

and your win os.

7 more replies
Relevance 40.59%

Recently installed a Brand new copy of Tiger Woods PGA Tour 2008 on my machine.
Upon starting the game, I get a dialog box stating that it has encountered an error and needs to close.
My machine meets or surpasses all requirements for the game.
Sorry, but haven't yet copied the error numbers.( got too PO'ed at it,I guess.)
 

Answer:Problem with Tiger Woods.

most problems with pc games are related to drivers or direct x. Make sure all of your drivers are up to date, and that direct x is up to date. there also could be an issue with user account control (for vista and 7) .

this is from eagames support
http://support.ea.com/cgi-bin/ea.cf...W5jb3VudGVyZWQgYW4gZXJyb3I*&p_li=&p_topview=1

or you may just have to reinstall it. that sometimes fixes issues.
 

4 more replies