Computer Support Forum

Cannot get past "Error InstalShield Scripting Runtime" When reinstalling game

Question: Cannot get past "Error InstalShield Scripting Runtime" When reinstalling game

Last winter I reformatted my HD and re-installed Windows 7 (64 bit). At that time I lost my Flight simulator game that I enjoyed a lot. Lately I tried to re-install my Flight Simulator game but I get the message "Error InstallShield Runtime". Is there a quick fix to this?

Relevance 100%
Preferred Solution: Cannot get past "Error InstalShield Scripting Runtime" When reinstalling game

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Cannot get past "Error InstalShield Scripting Runtime" When reinstalling game

What is the exact game you are installing to check on its compatibility?Is this an installation from Disc or a download off the internet?

6 more replies
Relevance 75.98%

Okay so I reformated (windows xp media center edition, intsalation went smooth cept it asked me for a SP2 cd i just went to cancel and it went on) and then i pop in the mobo cd and i try and install the lan drivers and then i get this message when i tries to install. So then on this comp i get the newest ones of the asus site and then i try that one and i get the same error. Anyone know whats up and how i can get internet on my comp?
 

Answer:"1607: Unable to install InstallShield scripting runtime" Help :/

It sounds like you didn't get a fully accurate install because you skipped the second CD. It's been a while since I installed MCE, but you were supposed to boot from the first CD, and then it will prompt for disc 2. Before it completes, I think it asks for disc 1 again.

Since this is a fresh build, I would start over and re-install again. This time, when it asks you for the CD, put disc 1 back in. It's very well documented on the web that the names given during the install process aren't that clear as to which disc it's asking for.
 

1 more replies
Relevance 75.69%

I'm trying to install Partition Magic (under XP) and get the message: "unable to install installShield Scripting runtime."
There was a thread on this some time back, (now expired) with some suggestions, which I tried. None worked.

Any kind soul out there with suggestions of where I should be going from here?

fvgfvg

Answer:"unable to install installShield Scripting runtime"

Does this help?

http://consumer.installshield.com/kb.asp?id=Q108340

2 more replies
Relevance 105.78%

The subject message pops up any time I attempt to open my IE8 browser using Windows XP and set to my home page "ATT.Yahoo". When I click "OK" in the message, IE closes and tries to recover, but with the same results each time. I know
there is a method to reset IE9, but can't tell if it also pertains to IE8 since it can't be opened.

Answer:"Microsoft Visual C++ Runtime Library" "Runtime Error! Program: C:Program Files\Internet Explorer\iexplore.exe"

Hi,
the first step in troubleshooting IE issues is to test in noAddons Mode.
toolbars.google.com - download and install the latest IE compatible version of the Google Toolbar.
for consumer help with IE select the Help>Online Support menu from IE and follow the prompts for your windows and IE versions. thx.Rob^_^

3 more replies
Relevance 96.35%

When I booted the computer just now, I got this error box pop up just before the lockscreen would normally appear:






Microsoft Visual C++ Runtime Library

Runtime Error!

Program: C:\Windows\System32\LogonUI.exe

This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information



I found the log for the error in the Event Viewer:






Faulting application name: LogonUI.exe, version: 10.0.10586.0, time stamp: 0x5632d88c
Faulting module name: msvcrt.dll, version: 7.0.10586.0, time stamp: 0x5632d79e
Exception code: 0x40000015
Fault offset: 0x000000000000c239
Faulting process ID: 0xafc
Faulting application start time: 0x01d1f18ee729ec8e
Faulting application path: C:\Windows\System32\LogonUI.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report ID: 8fb0fd47-f984-4320-be26-c96df52f02a1
Faulting package full name:
Faulting package-relative application ID:



This error has occurred before but only seems to occur very rarely, and I can just click "OK" and the box disappears and then it skips to the logon screen.

I have run an SFC scan and also a DISM scan via elevated command prompt and neither have detected any issues. I've also checked the startup items by looking in Task Manager, the only startup item that was listed was for Nvidia GeForce Experience which I didn't even have installed so I used Regedit to remove it but ... Read more

More replies
Relevance 96.35%

Hello, I got a BSOD while playing a game last night. After restarting my computer and getting past the
"starting windows" screen I got a consistent BSOD immediately after; I am currently forced to use safe mode.

Some computer specs:
Video card: Nvidia GTX 460
OS: Windows 7
CPU: AMD Phenom II X4 820 Processor 2.80 GHz
RAM: 8 GB

Here's the BSOD info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8009634010
BCP2: FFFFF880073DF14C
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Thinking it was a graphics card driver issue, I rolled back but still got a similar error:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA80092F1010
BCP2: FFFFF880073B2394
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

I've attached logs of the dump files. I plan on putting in an older graphics card and seeing if I can get my computer to start, but I thought I'd post here first.

Answer:BSOD during game; can't get past "starting windows" anymore

You are correct in that the dumps are blaming your NVidia gfx drivers for the crash, first step would be to uninstall/reinstall the latest drivers using DDU or driver sweeper to clear out

If it still fails try the same again using an older version, if it still fails try your other gpu

Basically what you are doing/have already done

1 more replies
Relevance 95.53%

Hey folks:

Don't know exactly what caused it but am now getting the "iexplore.exe" application error message referencing "unknown software" at location 0x77e73887, followed by the "Runtime error 217" at 009BD242. To avoid getting it at startup, I disabled or removed some startup programs (i.e. Sygate PF, KeyWallet, PopUp Stopper). But it just happens later on. For example, I clicked on Stevehp's link to "reveal secret to his PC's awesome power" and it immediately opened the link AND the same darn "iexplore.exe" and "Runtime 217" sequence.

I extracted a fresh copy of "iexplore.exe" to C:\Program Files\Internet Explorer, to no avail. I installed Visual Basic 6.5 Runtime files from Microsoft's VB support site, to no avail. I have performed myriad other system and registry maintenance tasks, but am getting nowhere.

Any ideas? I will appreciate any suggestion whatsoever!

My OS is, of course, WindowsXP SP1 (Build 2600.xpsp1.020828-1920).
 

Answer:Darn "iexplore.exe" and "Runtime 217" error

6 more replies
Relevance 95.12%

Hi Everyone,

A colleague of mine "Mary" is getting a scripting error in her Inbox whenever she looks at emails from one specific staff member, "Jill". Jill is a genuine sender, the messages that she sends do not get moved into Mary's junk, and the content of the emails is business related (e.g.: not funnies, etc).

Mary is using a Windows 7 Professional (64 bit) box with Office Outlook 2010 (32 bit) installed. Additionally she is using Office 365, so emails are being sent / received from the "cloud". I don't think that the cloud itself is the issue, and Mary can open emails from all other staff members, and customers (literally hundreds of different senders) without issue.

I requested that Jill send the same emails through to me in the hope that I could replicate the issue on my computer - however upon receiving the emails I did not see a scripting error. This is quite puzzling and leads me to believe that the issue is on Mary's computer - however it is conceivable that it is a combination of settings on both Mary's & Jill's computers!!!

At any rate here is a screen shot of the scripting error:

Image of Scripting Error

It has been given to me on good authority that the issue is likely one of the Outlook plug-ins, however with literally tens of plug-ins installed I don't want to take "a stab in the dark" and make the situation worse.

If anybody has any suggestions on how to fix this issue they will be greatly appr... Read more

Answer:Scripting error presented when emails are opened from "Jill"

Hi Mr Davo

Try the steps provided from these links:-

Error Message: An Error Has Occurred In the Script on This Page
Remedy Issue: An Error Has Occurred in the Script on This Page | Remedies for Remedy
http://support.microsoft.com/kb/308260

Let us know how it goes

I hope to come back with more suggestions.

2 more replies
Relevance 94.71%

 After I install Chikka messenger v.5, I tried to sign in but an error occurred.. "microsoft visual C++ runtime library"runtime errorprogram C:/users/this application has requested the Runtime to terminate it in an unusual way.please contact the application's support team for more informationhow to deal with this?

Answer:"Microsoft Visual C++ Runtime Library Runtime Error"

try uninstalling and then reinstalling the program

2 more replies
Relevance 89.38%

Hi, all--
You're probably heard it before: I'm getting a runtime error upon startup of norton systemworks\password manager\acctmgr.exe error.

I downloaded and used HiJack, and yes I read the tutorial very carefully and as best I could. Could anyone please help me fix this error?

Thank you kindly.
 

Answer:runtime error: "norton systemworks\password manager\acctmgr.exe error..."

Sounds more like a Software Forum disussion item to me. You may need to uninstall, reboot and reinstall Norton Systemworks.

Is there a particular reason that you think this is related to malware?
 

3 more replies
Relevance 87.74%

This is on my self built desktop listed last in my specs (Intel D845GVSR, ect.)I keep getting these errors in the form of an icon on my desktop. They keep adding up and I keep sending them to recycle bin. I've tried un-install/re-installing Java with the latest version with no joy. My uncle uses this machine and rarely does anything other than Yahoo Mail and Pogo games.The icons are always the same other than the last 4 digits (numeric) in this sequence: 'hs_err_pidxxxx'.Attached is the message of the latest, 'hs_err_pid3668'What's going on here and what do I do now?Also, this machine runs Malwarebytes and MSE antivirus (both up-to-date, scans = "no-infection")Other than this Java issue the machine runs fine.Should I be posting this thread in the malware section?As always, thanks for any help!!![regaining space - attachment deleted by admin]

Answer:"Fatal error has been detected by the Java Runtime Environment"?

Have you tried to update or reload Java?http://www.java.com/en/download/

9 more replies
Relevance 87.74%

Periodically, I get a popup on my desktop that says:


A Runtime Error has occured.
Do you wish to debug?

Line:567
Error: '0.firstChild.style' is null or not an object

Yes No

When I click "Yes":

- "Just In Time Debugging" pops up
- I click the only possible debugger, "New instance of Microsoft Script Editor"
- I click yes
- "Step Into Remote Procedure Call" pops up in a Word-ish program
- I choose "Script" to debug
- The process is "[3220] C:\WINDOWS\svchost.exe"
- I click "Ok"
- "Microsoft Visual Design Studio" pops up
- It says: "Microsoft JScript runtime error: '0.firstChild.style' is null or not an object
- I have a choice of Break, Continue, or Help
- Help is useless
- Continue makes it pop up again
- Break lets me edit the text
- The line is:
elm[0].firstChild.style.background = "none";
- The whole script is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html>
<head>


<title>101186657.no-ip.info</title>
<meta http-equiv="Keywords" content="">
<meta http-equiv="Description" content="">
<meta http-equiv="Content-Type" content="text/html;charset=utf-8">


<link rel="shortcut icon" href="/favicon... Read more

Answer:Runtime Error: "0.firstChild.style" is null or not an object

Hi
You could try this just to see if this helps ?
Symptoms of the problem
When you try to view Web pages in the Microsoft Internet Explorer, you may receive an error message that resembles the following:
Error
A Runtime Error has occurred.
Do you wish to Debug?
Line: line number
Error: nature of script error

Step 1: Start Internet Explorer
1. Click Start, and then click Run.

2. In the Open box, type Iexplore.exe, and then click OK.

Step 2: Turn off script debugging
1. On the Tools menu, click Internet Options.

2. In the Internet Options dialog box, click Advanced.

3. Click to select the Disable script debugging check boxes.

4. Click to clear the Display a notification about every script error check box

5. Click OK.

let me know how that goes please
 

3 more replies
Relevance 87.74%

Just re-discovered this forum!

Can anyone help?
I've just bought the newest Nero and Blu-ray/HD-DVD Plug-in but when it tries to transcode videos I get an error (below). I've searched the net and plenty of people get it in all sorts of different programmes on the PC. There's even a MS hotfix for it but it only works for XP (they sent me the link to do it). Anyone know what I can do to prevent it as the software is currently useless and their tech support haven't responded for 2 weeks.

the error that pops up:

Microsoft visual basic c++ runtime library

Runtime Error!

program: C:\location of the programmes exe file

This application has requested the Runtime to terminate it an unusual way. Please contact the application's support team for more information.
any help would be greatly appreciated

I'm using Windows Vista Ultimate 32bit with all updates and my system spec is well above the minimum for the software

on another forum I was told that uninstalling, rebooting and then reinstalling my ATI drivers & software will do it as that installs the Visual C++ stuff but it hasn't worked. Last night I re-installed .net framework 1.1 (with sp1) and I also downloaded & installed C++ Runtime Libraries (2005) from the MS site but it still doesn't work)

I'm now completely stumped and getting desperate but really don't want to have to re-install Vista if I don't need to
 

More replies
Relevance 87.74%

When I click on "Outlook Today" in MS Outlook 2002, I get "A runtime error has occured, do you wish to debug? Line 297, error: Library not registered."

How do I fix this?

Thanks.
 

Answer:MS Outlook 2002 runtime error: "library not regisitered"

Hello. If anyone is reading this post, please let me know how to fix the runtime error in my 8/17 post regarding MS Outlook 2002.

Thanks.

Stuyve
 

1 more replies
Relevance 87.74%

I get this error message all the time including tonight.

"Microsoft Visual C++ Runtime Library"
"Runtime Error!
"Program: C:\Program Files/ America Online/waol.exe
"R6025"
" - pure virtual function call"

The message pops up out of nowhere. It has a red X in the corner. I always get it when I'm using AOL (8.0). I get the error message, AOL freezes, as well as magnifier, which I usually have open. When I click OK, AOL closes and magnifier stays frozen. I click control+alt+delete, go to processes, and end the task of waol.exe. Then magnifier usually goes back to normal. I always lose everything that's open in AOL. This is very frustrating. I tried increasing the virtual memory, but that obviously hasn't helped. This actually happened a little while ago and I don't want to click OK because I would be losing some very important information that would be a huge hassle to redo. Please, can anyone help me? I don't want this to happen anymore. Thanks.

Answer:"Microsoft Visual C++ Runtime Library" error message when I use AOL

welcome
first check for malware/virus infections
your internet access could be broken
i would also reinstall aol--
uninstall all versions from your add/remove software in the control panel first.
your account, screen names, and mail will still be there when your done.

4 more replies
Relevance 87.74%

I ran into this problem about 2 months ago and did everything I could think of to resolve it - i.e. reinstalled AOL, deleted old versions, ran Spybot, antivirus, etc. to no avail. Then it just mysteriously cleared itself up! I don't know what I did since after all that, I still got the error message everytime I tried to start up AOL. Then in trying it one day, it just worked! Well, I had a feeling that wouldn't last. It didn't. Just 2 days ago, the same thing happened again - trying to start AOL and getting, "Visual Basic C++ Runtime Library Runtime Error! Program: C:\PROGRA~1\AOL9~1.0\woal.exe". "This application has requested the Runtime to terminate it in an unusual way. Please contact the applications support team for more information."

I don't use AOL that much anymore but had many emails stored on the "save on my PC" label in AOL and would like to retrieve them if nothing else. I can do without using AOL if I have to but would like to continue using it if possible. Any help with this problem would be greatly appreciated.

I have seen the fix for IE on another thread - remove the Google or Yahoo toolbars but I guess that is not what's causing the problem here. Please help, this is driving me crazy!

Here's a copy of my Hijackthis logfile if that helps:

Logfile of HijackThis v1.99.0
Scan saved at 8:17:35 AM, on 3/22/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.1641... Read more

More replies
Relevance 87.74%

What is this and do I need to fix it? It was a MS problem solving message that came up in my Action Center. I click on the link and it doesn't take me to any downloads.



Solve a problem with Netscape Portable Runtime


Netscape Portable Runtime has stopped working properly.
A newer version of Netscape Portable Runtime is available for download that might solve this problem. Mozilla recommends updating to the latest version of to take advantage of security and stability improvements.
Tap or click to go to the Mozilla website to download the latest version of Netscape Portable Runtime

Netscape Portable RuntimeClick to expand...


 

Answer:"Netscape Portable Runtime has stopped working" error

This is on an XP computer.
I looked in C:\Program Files\Mozilla Firefox
and I have nspr4.dll in there.
Mine has a size of 168 - 172 kb. It is version 4.9.4.0 and was updated on March 8, 2013.
I updated FF then so I guess that came along with v 19.0.2

I just checked my Win 7 computer and it matches the XP one as far as location, size and version.
 

10 more replies
Relevance 87.74%

Hi I am getting this error when installing visual studio 2008. The title of the error dialog box showing "Poor virus".Any one help me regarding this.thnksprasanta

Answer:Getting runtime error 70 "permission denied" on installing visual studio 2008

Make sure you are a Admin on the machine.Also you should check to see if you have any spyware on your machine.http://www.computerhope.com/forum/index.php/topic,46313.0.htmlPost the logs in a new thread in the virus form found here.....http://www.computerhope.com/forum/index.php/board,7.0.html

1 more replies
Relevance 87.33%

Hello there~

Recently, I have encountered a number of rather disturbing problems with my Computer(Windows XP).

With a number of programs, such as CCleaner, SuperAntiSpyware, WinDS Pro, MyDefrag etc. etc.... I got an Error... R6002 - floating point support not loaded. Usually. The Error either appeared when I start the program or when I do something with the program~ For example, CCleaner only got this Error after ending a system cleaning, thus closing. MyDefrag gets the problem all the time but it can be ignored - the program works completely fine.
I tried several things to get rid of the error - checking my registry with different programs, using a multitute of antivirus programs, deinstalling and/or reinstalling Microsoft Visual C++, reinstalling all the affected programs... To no avail - nothing has helped in the least bit.
But while trying to figure this problem out, I encountered another rather disturbing problem: Some of my downloads just won't finish. For example, if I try to download CCleaner from ANY site, no matter which, the download will either always stop at the last missing bytes, dropping to 0 kbps and doing nothing, or the download has 0kbps from the start. I tried a number of things, like restarting the computer, cancelling the download and restarting it... to no avail, once again. The only thing that worked is: Downloading a downloader for the program, like it is always the case on softonic or the likes. By downloading a downloader first, it someti... Read more

Answer:Severe Downloading Issues and "Runtime Error: Floating Point Support Not Loaded"

The file npswf32.dll is for Flash, but my copy is named npswf32_11_6_602_180.dll & dated 3-12-2013

errors like "floating point support not loaded" are created in two ways:
1) the floating point library can not be found
2) the program attempting to load it is not the correct version for your hardware platform.

Your system integrity is questionable (ie likely to be infected), but I would first investigate the Eventlog using Eventvwr.msc and look for errors in the System Log.

Highly recommend you run SFC /SCANNOW (but you will need your install CD or to borrow one from a friend - - it must match your currently installed system).
 

3 more replies
Relevance 87.33%

This shut down occurs ONLY when I am using 3 peripheral usb devices simultaeously and it doesn't happen right away. Sometimes it's an hour and sometimes it's several hours before it crashes. Now there is an executive program that is controlling all of the usb devices, if that makes any difference or not. It never happens any other time. The zip file from your dmp log application is attached.
Thanks
Dave

Answer:Blue screen error 0x00000044; "Kernel Mode Driver Framework Runtime"

Welcome. Caused by USB-to-Serial Cable Driver/GembirdUAS112 Driver Reference Table


May be you want to install an older driver version and see if that helps.



Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\admin\Downloads\OBSERVATORY-Fri_11_21_2014_140649_77\112114-17940-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18526.amd64fre.win7sp1_gdr.140706-1506
Machine Name:
Kernel base = 0xfffff800`0344c000 PsLoadedModuleList = 0xfffff800`0368f890
Debug session time: Fri Nov 21 13:06:35.615 2014 (UTC + 6:00)
System Uptime: 0 days 4:17:12.232
Loading Kernel Symbols
...............................................................
................................................................
................................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

3 more replies
Relevance 87.33%

Any one have a clue what [Runtime error "6" -Overflow] is, why it is generated when attempting to start a program and/or what can be done to correct the problem??? any ideas at all will help...
 

Answer:{Resolved} - Runtime error "6" Overflow in Win2KPro

Greetings

Um... if this were a medical advice site, this is what I just read:

"I get a popping noise every time I bend. Do you know what that is?". At least in the title you mentioned that you were human. No mention of what you were bending, in which way you were bending, whether you know if you are double jointed, etc...
So... let us fill in some gaps:

1) What program are you trying to run?
2) When do you get the error?
3) If the program used to run correctly, what have you added since then?
4) Have you changed any settings, or installed any programs/updates since it was working properly?
5) What is the title of the error box?
6) What is the exact text of the error?

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/multiboot

Every morning is the dawn of a new error...
 

2 more replies
Relevance 87.33%

Ok, I'm sorry if I'm in the wrong section, I'm new here. I would please like someone to help me with this. After a few hours of using my computer, or going away from my computer, I have the error 10055, no buffer space available. I need to restart my computer because my wireless internet apparently does not work. The connection stays fine and constant, but no web pages show up, MSN closes down, and it's like the connection closes down. The title shows sdfsdf (At the top where it shows the name) and it's really annoying. I have a HiJackThis log if you need it. Also, after a little while, I didn't get the error, and I'm just losing my internet connection. It's really annoying because my computer takes a long time to restart. Here is my hijackthis log.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:43:56 PM, on 4/20/2010
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18444)
Boot mode: Normal

Running processes:
C:\Program Files (x86)\Intel\Intel Matrix Storage Manager\IAAnotif.exe
C:\Program Files (x86)\Opera\opera.exe
C:\Program Files (x86)\Windows Live\Messenger\msnmsgr.exe
C:\Program Files (x86)\VoipRaider.com\VoipRaider\voipraider.exe
C:\Program Files (x86)\Yahoo!\Messenger\YahooMessenger.exe
C:\Program Files (x86)\Yahoo!\Search Protection\SearchProtection.exe
C:\Program Files (x86)\Skype\Phone\Skype.exe
C:\Program Files (x86)\uTorrent\uTorrent.exe
C:\Program Files (x86)\ManyCam 2.4\Ma... Read more

Answer:Runtime Error 10055 "No buffer space available"

12 more replies
Relevance 87.33%

I really hope some one can help me with this. I have tried everything I know. Everytime I go to shut down or even log off, this error pops up. I press return, and it carries on as normal but its just really annoying.

I have tried reinstalling XP service patch 2, scanning for missing windows files, looked at the leven manager but it tells me nothing, looked at task manager nut there are no running applications, tried resitry cleaning tools, disabled erro reporting.....but nothing has worked.

I think...think...this may have happened after a virus was found on my pc and I chose delete but since then, I have deleted the anti virus program and used another one.

Does any one know, how I can either turn off the message or better still track what file its trying to find. Any help would be most appreciaed.
 

Answer:Update Runtime Error "53" File Not Found

Welcome to TSG...That error message usually includes the name of the .dll file-without that, you're right...tough to pin down.

If you've just recently installed a new program (like your new antivirus), try uninstalling from add/remove programs and reinstalling the application. Corrupted or unfinished installations can be at fault...

If you have the slightest suspicion that there may still be malware on your machine, download hijackthis here:

http://www.thespykiller.co.uk/index.php?action=tpmod;dl=item5

Double click on the HJTsetup.exe icon on your desktop.
By default it will install to C:\Program Files\Hijack This.
Continue to click Next in the setup dialogue boxes until you get to the Select Addition Tasks dialogue.
Put a check by Create a desktop icon then click Next again.
Continue to follow the rest of the prompts from there.
At the final dialogue box click Finish and it will launch Hijack This.
Click on the Do a system scan and save a log file button. It will scan and then ask you to save the log.
Click Save to save the log file and then the log will open in notepad.
Click on "Edit > Select All" then click on "Edit > Copy" to copy the entire contents of the log.
Paste the log in your next reply.
If you haven't already posted then start a new thread in the security forum
DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required.
 

1 more replies
Relevance 87.33%

"runtime error" Do you wish to debug?
line (OMITTED) error syntax error"

then a "just in time debugging message for
some new script editor?
________________________________________________
i am considering this error message as a possible
security concern. on one of my web pages,i received
that message for the first time in 2 years of opening
my web page.

i have had an email hacked during the past 3 days
so anything unusuall, i am considering a security concern
and have spent hours with security software to clean
the computer.

should have security concerns with this new error
message?

thanks
 

More replies
Relevance 86.92%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

Answer:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Relevance 86.51%

I have a new HP 4530s. I was opening an excel sheet and the system froze: the cursor is frozen also. A box reads "Just In-Time Debugging"...an exception "Runtime Error has occurred in script. However, no debuggers are registered that can debug this exception. Unable to JIT debug." It gives the option to hit "okay", but my cursor is frozen. Help! (I'm on another laptop writing this).
 

Answer:Frozen cursor, "Runtime error"

Troubleshooting Runtime Errors
 

1 more replies
Relevance 86.51%

Does anyone know how to get rid of A "Runtime Error" Message that pops up randomly while connected to the internet? It locks up the internet, and forces me to close internet explorer,and restart the program.

Answer:Random "Runtime error" Message

What Runtime Error is it? If you give us the full error message or post a screen shot we can help you.

2 more replies
Relevance 86.51%

Help, if you can,

I am attempting to remove a runtime error 53 message that appears during startup on a Dell machine running XP. No new software has been installed. The only thing that has changed was that McAfee found a virus and removed it, since then the error has been coming up. One more thing - in the top blue margin of the error message, the word "sex" appears.
I have followed the recommendations of other posts and run adaware, spybot, Ace Utilities and have also run a report with Hijack This. Although I have deleted many inconsistencies, I have been unable to get rid of the error message.
Here is the log from Hijack.
Thanks, Al

Logfile of HijackThis v1.97.7
Scan saved at 7:43:15 PM, on 5/24/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\PROGRA~1\COMMON~1\AOL\ACS\acsd.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\wanmpsvc.exe
c:\PROGRA~1\mcafee.com\vso\mcshield.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\hkcmd.exe
C:\WINDOWS\system32\dla\tfswctrl.exe
C:\WINDOWS\System32\DSentry.exe
C:\Program Files\Dell\Media Experience\PCMService.exe
C:\PROGRA~1\mcafee.com\agent... Read more

Answer:Runtime Error "53" - file not found

Rescan and put a check next to each of these then close all browser windows and click "fix checked"

O1 - Hosts file is located at: C:\WINDOWS\System32\drivers\etc\hosts

O2 - BHO: (no name) - {549B5CA7-4A86-11D7-A4DF-000874180BB3} - (no file)

O2 - BHO: (no name) - {FDD3B846-8D59-4ffb-8758-209B6AD74ACC} - (no file)

O4 - HKLM\..\Run: [BJCFD] C:\Program Files\BroadJump\Client Foundation\CFD.exe

O4 - HKLM\..\Run: [D42877F3] C:\WINDOWS\System32\ildhxoadvcp.exe

O4 - HKLM\..\Run: [WSAConfiguration] drrss.exe

O4 - HKLM\..\Run: [rn4d] C:\WINDOWS\System32\f0r0r\kolder.exe C:\WINDOWS\System32\f0r0r\dirote.exe

O4 - HKLM\..\Run: [Microsoft 16Bit Update] wuapdate16.exe

O4 - HKLM\..\RunServices: [WSAConfiguration] drrss.exe

O4 - HKLM\..\RunServices: [9B3A3FDA] C:\WINDOWS\System32\ildhxoadvcp.exe

O4 - HKLM\..\RunServices: [Microsoft 16Bit Update] wuapdate16.exe

O4 - HKCU\..\Run: [Microsoft 16Bit Update] wuapdate16.exe
Then reboot your system into safe mode and delete:
C:\WINDOWS\System32\ildhxoadvcp.exe
C:\WINDOWS\System32\f0r0r\dirote.ex
C:\WINDOWS\System32\drrss.exe
C:\WINDOWS\System32\wuapdate16.exe
how to boot into safe mode
then when complete, post a fresh log please.
 

2 more replies
Relevance 86.51%

Periodically, I get a popup on my desktop that says:


A Runtime Error has occured.
Do you wish to debug?

Line:567
Error: '0.firstChild.style' is null or not an object

Yes No

When I click "Yes":

- "Just In Time Debugging" pops up
- I click the only possible debugger, "New instance of Microsoft Script Editor"
- I click yes
- "Step Into Remote Procedure Call" pops up in a Word-ish program
- I choose "Script" to debug
- The process is "[3220] C:\WINDOWS\svchost.exe"
- I click "Ok"
- "Microsoft Visual Design Studio" pops up
- It says: "Microsoft JScript runtime error: '0.firstChild.style' is null or not an object
- I have a choice of Break, Continue, or Help
- Help is useless
- Continue makes it pop up again
- Break lets me edit the text
- The line is:
elm[0].firstChild.style.background = "none";
- The whole script is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html>
<head>


<title>101186657.no-ip.info</title>
<meta http-equiv="Keywords" content="">
<meta http-equiv="Description" content="">
<meta http-equiv="Content-Type" content="text/html;charset=utf-8">


<link rel=... Read more

Answer:Runtime Error: "0.firstChild.style"

Welcome to Major Geeks!

My first impression is that this is not a problem for the Malware Forum. it looks more like a JavaScript for some site you access ( like http://www.w3.org ) However to make sure that it is not malware, you will have to run the below. Your other choice is to post in the Software Forum.


Please follow the instructions in the below link and attach the requested logs when you finish these instructions.


READ & RUN ME FIRST. Malware Removal Guide

If something does not run, write down the info to explain to us later but keep on going.

Do not assume that because one step does not work that they all will not.
Notes:
If you run into problems trying to run theREAD & RUN ME or any of the scans in normal boot mode. You can running steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:

Starting your computer in Safe mode

If you have problems downloading on the problem PC, download the tools on another PC and burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.

 

1 more replies
Relevance 86.51%

I am having an incredibly hard time with a couple of computers running XP (32 & 64) at different locations and I suspect from the symptoms that there may be a really DEEP malware infestation that survives reinstalling the OS.

Using MWB as a first move is usually recommended, though there are supposedly countermeasures used against MWB. When I downloaded the installer today and used it on one of these machines with a clean OS installation, I got the error in the title, though the program appeared to install and load. I uninstalled and reinstalled with the same result

Any thoughts on this?

Thanks for any help!
 

Answer:MWB "Runtime Error (at 58:205) Could Not Call Proc."

Hiya

Are you still having this problem? If so, are both computers connected to the same router? Also, can you tell me what symptoms you're getting.

On both systems, can you run the following. Just call them computer 1 and 2, so we can work on each easily

Download OTL to your Desktop
(Vista or Win 7 => right click and Run As Administrator)
Double click on the icon to run it. Make sure all other windows are closed and to let it run uninterrupted.
When the window appears, underneath Output at the top change it to Standard Output.
At the top, check the box entitled Scan All Users
Toward the bottom, check:
LOP Check
Purity Check
Under the Standard Registry box change it to All
Do not change any settings unless otherwise told to do so.
It should look like this:

Please copy the text in the code box below and paste it in the Custom Scans/Fixes box in OTL:
Code:

DRIVES
netsvcs
activex
msconfig
drivers32
%systemroot%\assembly\GAC_32\*.ini
%systemroot%\assembly\GAC_64\*.ini
%ALLUSERSPROFILE%\Application Data\*.exe
%APPDATA%\*.
safebootminimal
safebootnetwork
%SYSTEMDRIVE%\*.*
%PROGRAMFILES%\*.exe
%LOCALAPPDATA%\*.exe
%windir%\Installer\*.*
%windir%\system32\tasks\*.*
%windir%\system32\tasks\*.* /64
%systemroot%\Fonts\*.exe
%systemroot%\*. /mp /s
/md5start
pnrpnsp.dll
nwprovau.dll
nlaapi.dll
napinsp.dll
mswsock.dll
winrnr.dll
wshelper.dll
consrv.dll
explorer.exe
winlogon.exe
regedit.exe
Userinit.exe
svchost.exe
services.exe
user32.dll
atapi.sys
csrss.exe
PRINTISOLA... Read more

1 more replies
Relevance 86.51%

Need Urgent help!

My windows won't start and I got an error message "Unable to Locate Component. dwmapi.dll was not found Reinstalling may fix this problem"
I am not good with computer stuff. I tried fixing the problem running recovery disks but the windows still won't start up and the same error message still appears.
I don't remember installing any programs prior to receiving this msg. If this may be caused by spyware/virus type of sort, please also advise on how to fix this problem.
Thanks in advance.

Answer:Error:"dwmapi.dll was not found Reinstalling may fix this problem"

Can you start in safe mode?

2 more replies
Relevance 84.87%

Rec'd runtime error occurred.
do you wish to debug?

Line 150
Error:'documentad1holder' is null or not an abject

I have done deep scans with adaware and spybot,
update my virus protection with AVG6.0

Any suggestions?
 

Answer:Runtime error:"documentad1holder"

6 more replies
Relevance 84.87%

Hi all at TSG!! Had an error come up today...what is it and what do I need to do about it...if anything???

The Error said: "MS Visual C++ Runtime Library / Runtime Error / Program: C:\Program Files\Common File\KeenValue\KeenValue.exe" then says: "This Application has requested the Runtime to Terminate it in an Unusual Way. Please contact the applications support team for more info".

But...not sure of which application caused this error...if I recall correctly...was just playing a game...so I went and checked My Computer, where I have "Keen Value" and "Incredifind BHO" listed under "Program Files"...my only clue to give you that I am aware of...and...how/why did these items get under Program Files? And...did any of these cause this error?

I am totally CLUELESS in CALIFORNIA...seeking out a clue to this matter....and if I can find the answer...it will be from someone here at TSG!! You da best 'o' da best!!! Much Appreciated!!

Thanx...parrotplay / Lee(ann)!!!
 

More replies
Relevance 84.87%
Relevance 84.87%

I am trying to install a math tutorial CD that goes to a stats textbook but when I try to install it gives me the following error:

Run-time error 339:
Component 'RMOC3260.dll" or one of it's dependencies not correctly registered: a file is missing or invalid.

The program works fine on our other computer but I just upgraded to Vists Ultimate 64 on this new machine and it seems to be havving issues. The file 'rmco3260.dll' says that it is a Real Player Active X control on the intall disk if that helps any. I have tried searching for error 339 issues and have tried creating a non-administrator user account and installing on that instead; no joy. I tried manually instaling the file in the system folder using 'regsvr32' in the cmd prompt and it said the file may not be compatable with my operating system. Every diagnostic tool I find seems to only work on 32 bit OSs.

Any insight? Thanks
 

More replies
Relevance 84.87%

Hello,

I'm ashamed to admit this but for about 2 years now, everything i try to log into certain pages (ex. gmail) i get this attached pop-up. i can either hit "no" and be on my way or hit "yes" about 12 times before i'm allowed to proceed. Is this a simple fix? I've done the recommended spyware, adware, malware removals. Thanks in advance.

Kevin
 

Answer:Runtime Error "wish to debug"

Well, this is now more of a future reference for others thread...
I simply went to Windows Online and ran the Debugger. It's all good now.

http://support.microsoft.com/kb/822521
 

1 more replies
Relevance 84.87%

What do I need in order to fix this problem? This pop-up message appears when I patched my game

Answer:Microsoft Visual C++ Runtime Library Runtime Error" error message

According to the error message the application (the patch you installed) isn't working right and for you to contact the folks who made the patch. I'm guessing that would be the support team for Audition Dance Battle or perhaps the support folks for all of e-games.com.ph

::E-Games - Audition Dance Battle::

E-Games Portal

Let them know exactly what the error message says, the specific ID number for the patch you installed, specific info about your computer (make, model, version of Windows you're using, amount of RAM, CPU, etc) so they can figure out what's wrong. In the meantime, you could try uninstalling the patch while waiting for a response. Sorry I can't be more help.

7 more replies
Relevance 83.64%

How I fix it I see many videos see but not work what I do this is my personal software and I install all visual runtime c++
but no where I download "Microsoft Visual C++ Runtime Library"?


help me       



Microsoft Visual C++ Runtime Library "Runtime That's a file for download pls help me?

More replies
Relevance 83.64%

Program: C:\windows\system32\0152\misconfig.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information."
As I don't know what the application is, or who it's support team are, I cannot contact them.  So I do not know what I should do as this message keeps coming up on my desktop.  Please can someone help me by telling me what the
message means and how I should rectify the problem?  Please put your answer in simple, layman's terms as I would not understand any technical terms.
Thank you for taking the time to read this message.

More replies
Relevance 83.64%

Newly purchased Laptop with windows 8.1 OS preinstalled. We have successfully added this system to domain. While accessing the application after logging into the domain with Domain Credential, we found below attached error where  user is having local
admin previledges and  the UAC disabled.

Answer:"This application can't open" --- There is a problem with " application name" . Contact your system administrator about reparing or reinstalling it

Hi,
Firstly, please enable UAC and restart your computer to test if this problem resolved.
If problem persists, try to use APP troubleshooter to check APP problem, if there is any reports, please feel free let us know.
Windows App troubleshooter:
http://go.microsoft.com/fwlink/p/?LinkId=268423

Roger Lu
TechNet Community Support

5 more replies
Relevance 83.23%

Code:
? OS - Windows 7
? x64
? What was original installed OS on system: This
? OEM
? Age of system (hardware): All purchased new, Dec 2010
? Age of OS installation - have you re-installed the OS? Dec 2010, never re-installed
? CPU: Intel i7-950
? Video Card: Palit SONIC nVIDIA GTX 460 Geforce 1GB Graphics Card
? MotherBoard: Gigabyte SKT-1366 X58-USB3 Motherboard
? Power Supply: Corsair 650W
The BSOD only crashed when running Battlefield: Bad Company 2, usually about 20 minutes into the game. This has only started happening in the last week. Before that, I could play this game for hours without a problem.

I previously overclocked it, but returned it to factory settings just to be sure. I was monitoring the core temps the very moment the most recent BSOD happened, and they maxed at about 60.

Thanks for any help,
Michael

Answer:[SOLVED] BSOD - &quot;hardware error&quot; when running a specific game (BC2)

Hello,

First off, your BSODs look remarkably like the ones here: BSOD while playing BFBC2 - Windows 7 Forums

So much so, in fact, that I wonder if PnkBstrB.exe is truly the offending process. See if you can find an updated version of the anti-hacking program. I don't know the game myself, but the guys on SevenForums are discussing PunkBuster more; I suggest you follow their conversation and do what they do.

...Summary of the dumps:

Code:

Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Sat Mar 12 05:33:34.596 2011 (UTC - 5:00)
System Uptime: 0 days 0:42:47.605
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: PnkBstrB.exe
FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE
SystemProductName = X58-USB3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Fri Mar 11 14:12:37.562 2011 (UTC - 5:00)
System Uptime: 0 days 1:41:01.764
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: PnkBstrB.exe
FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE
SystemProductName = X58-USB3
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Fri Mar 11 09:23:19.455 2011 (UTC - 5:00)
System Uptime: 0 days 0:29:... Read more

3 more replies
Relevance 83.23%

I have the game port microsoft sidewinder precision pro, force feedback, and some ch product flight sticks. I bought this brand new sabrent 6 channel 5.1 sound 3D pci card with a game port. Windows XP pro saw the card and installed the drivers. I hooked up the sidewinder went into the control panel to the game controller box. Search down the list and clicked on the sidewinder. When it loaded up I got a message from windows that it detects and is installing the sidewinder, but when I go to the controller box it says it is not connect. Now I triple checked to make sure it was connected properly with both joysticks. I checked to see if there were any updates for the sound card driver and the game port driver, no new updates, and the device manager shows that both are working properly.
I went into the BIOS to disable the on board sound, but that didn't help.
So anyone here know how to correct this? Looks like no matter what joystick I hook up I get the "not connected" error. Help!
 

Answer:New Sabrent Sound Card w/Game Port "Not Connected" error

also I would like to add that I uninstalled and reinstalled the drivers, but no change. Could it be some IRQ sharing conflict?
 

3 more replies
Relevance 83.23%

Hello everyone, I have been trying to use this game modding application that keeps giving me an error on my machines, everyone else seems to be able to run it fine, I'm not quite sure if its a file I'm missing? Or if the application isn't working correctly because I'm missing something... I know this should be seen by the developer but his last word on this application or anything related to this topic has been posted in 2015, he/she disappeared. So if anyone can hint to me what's happening here? It would be appreciated.Here's the code it spits out: (if it doesn't display correctly, pastebin link: See the end of this message for details on invoking just-in-time (JIT) debuggi - Pastebin.com )

Code:
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.************** Exception Text **************System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Users\Mike Fox\Network Offloading\Atari\Test Drive Unlimited\Modding tools\TDUPE 2.77!\temp\debug.log'. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.I... Read more

More replies
Relevance 83.23%

hi,
I'm trying to burn a hogs of war (ps1) iso file which i have converted back from a psp EBOOT file using psx2psp.
I burn the the .ccd file using alcohol 120% and i get the message about the Image size not matching to the Lead-Out recorded in TOC and i select the recommended option to "keep TOC as on source cd, write until end of img file.

can someone pleeease help me get this right as hogs of war is a freking awesome game.
if you can help then hugs and kisses and that mushy krap.

edit: oh and hears the burn error log:

###################### Source Disc/Image Information ######################
Type: CloneCD Image file
Path: C:\Games\Hogs of War\Copy of Hogs of War\
Name: how iso hopefully.ccd
how iso hopefully.img
Size: 484.35 MB
Session: 1
Track: 1
Session 01:
Track 01: Mode 2 Form 1, Length: 122797(239.8 MB), Address: 000000
#############################################################################

####################### Dumping/Recording Progress Log #######################
********* Time stamp of this log file: 30/01/2008 5:44:45 p.m. *********
17:44:45 Processor info: Intel® Pentium® 4 CPU 3.00GHz x 2 (3001MHz)
17:44:45 Memory Available to Windows: 1,048,092 KB
17:44:45 Memory Buffer size: 256 MB
17:44:45 Starting EFM Error Bypass Engine
17:44:45 Image file loading: C:\Games\Hogs of War\Copy of Hogs of War\how iso hopefully.ccd
17:44:45 Source Info: Session: 1, Track: 1, Length: 239.8 MB / 027:17:22
17:44:58 (D TSSTcorp CD/DVDW TS-H552U(1:0): Reco... Read more

Answer:game burning error "human brain input missing"

ok i tried to just burn the iso image without using the .ccd file but i had to set track format, block size, image and trailer size, and whether the data was scrambled and/or contains EDC\ECC info sections.

having no idea i burned with the original settings i.e
track format: track mode 2 form 1
block size: 2352
image trailer size: 0
image header size: 0
data was scrambled: n
// contains EDC/ECC info sections: no

and now the videos have no audio.

any ideas?
 

1 more replies
Relevance 83.23%

Joy.cpl opens fine, and each device has "OK" next to it, but when I attempt to click "properties," no worky. Says "Necessary support files not found." I think this may have to do with my monkeying with DirectX, as 9.0c screwed over my joystick's compatibility with X-Wing Alliance, and I used a utility to uninstall it forcibly. I then proceeded to attempt reinstalls with 8.0 and 7.0, but neither worked. Now, after reinstalling 9.0c, the properties button remains unavailable, the joystick -still- doesn't work in X-Wing Alliance, and it's becoming very frustrating. I don't have my Windows 2000 cd as it is in CO with my dad--I do have a full copy on the hard drive, however. Both input devices worked before--one is a usb and one is a serial port. Essentially dxdiag tells me everything is fine regarding inputs, though dsound is apparently an older version, and ddrawex.dll was missing until I copied it back in from a source online. How can I, in order of importance:

A) Return the Properties button to normal functioning
B) Get X-Wing Alliance's aging software to detect my version of DirectX enough to recognize my joystick?

The basic problem with X-Wing isn't appropriate for this forum, natch, but apparently its joystick recognition interface is tied to an outdated dxdiag, and the "configure input" button results in a command to install DirectX 6.1--this didn't happen before with previous versions of DirectX,... Read more

Answer:Game Controllers "Properties" button returns error message

8 more replies
Relevance 83.23%

:wave I have the game port microsoft sidewinder precision pro, force feedback, and some ch product flight sticks. I bought this brand new sabrent 6 channel 5.1 sound 3D pci card with a game port. Windows XP pro saw the card and installed the drivers. I hooked up the sidewinder went into the control panel to the game controller box. Search down the list and clicked on the sidewinder. When it loaded up I got a message from windows that it detects and is installing the sidewinder, but when I go to the controller box it says it is not connect.:cry Now I triple checked to make sure it was connected properly with both joysticks. I checked to see if there were any updates for the sound card driver and the game port driver, no new updates, and the device manager shows that both are working properly.
I went into the BIOS to disable the on board sound, but that didn't help.
So anyone here know how to correct this? Looks like no matter what joystick I hook up I get the "not connected" error. Help!:confused
 

Answer:New Sabrent Sound Card w/Game Port "Not Connected" error

:wave also I would like to add that I uninstalled and reinstalled the drivers, but no change. Could it be some IRQ sharing conflict?:confused
 

6 more replies
Relevance 83.23%

Hi,
I recently bought an old gameport flight control system off eBay for use in flight sims. When I click on the "Add..." button at the game controllers control panel, I get one of those Send Error Report messages. Since I've only had to deal with plug&play USB controllers in the past, I've never had to manually add a controller so I don't know how long this problem has existed on my system. I've tried expanding rundll32 from the WinXP CD into my system32 folder, and I've taken all the steps in the "READ & RUN ME FIRST. Malware Removal Guide". I've searched the internet, but the only results I've found deal with rundll errors while running System Restore. I'm running WinXP Pro SP2 on a homebuild P4. Below I will post some of the details from the error message, and I will also attach the logs from AVG anti-virus, BitDefender, Panda ActiveScan, runkeys, newfiles, and HiJackThis. If any can help me or has any ideas, I would be very grateful.

Thanks in advance.

Error Message:
Run a DLL as an App has encountered a problem and needs to close. We are sorry for the inconvenience.

Error Signature:
EventType : BEX P1 : rundll32.exe P2 : 5.1.2600.2180 P3 : 41107dbc
P4 : dinput8.dll P5 : 5.3.2600.2180 P6 : 411096b0 P7 : 0001874f
P8 : c0000409 P9 : 00000000

Files Included in Report:
C:\DOCUME~1\ZeRo\LOCALS~1\Temp\WER5f02.dir00\rundll32.exe.mdmp
C:\DOCUME~1\ZeRo\LOCALS~1... Read more

Answer:Rundll error at "Game Controllers" control panel

More logs.
 

1 more replies
Relevance 83.23%

2nd time I had this "issue"    found this on the motherpage http://support.microsoft.com/kb/258496anyone had this problem before and what helped you resolve this and / or any advice since this looks like one of those   A. B. C .D. E. F.  or any of the aboveresolutions ?   

Answer:error 1305. "installing new* Company of Heroes" game

I've never had this issue before...not much into gaming...Did you try any of the resolutions Microssoft provided on that link you submitted?

3 more replies
Relevance 82.82%

This is getting to be a real pain. I bougth the "Return of the Kings" last year and this year "Doom 3" and both give me the same problem. They load perfectly okay and even auto start the opening menu when I put CD1 into the drive but when I hit play I get the same message that it can not find disk 1. I have a DVD RW and CD-ROM drive and it works in neither. I have messed around with the Master/Slave setting on each and have even tried removing one then the other just to see if that worked.

I am running XP on an Athlom +2600 with NEC DVD and Lite-On CD-ROM

Any ideas, I trawled the internet with little success.

Answer:"Can Not Find Disk 1" error when starting game

Sometimes games are mislabeled - have you tried the other discs in the sets to see if they work instead?

Also, this normally occurs when the copy protection is kicking in; your games may be misreading your discs in some way due to the hardware and thinking it's actually an illegal copy. Both of these games use Safedisc V3 as the copy protection, so it may be your drives are incompatible with the software. This only happens a very limited amount of the time, and if you have a proof of purchase the company often sends a copy out to you with no protection. Many companies accept the original discs as valid proof of purchase.

2 more replies
Relevance 82.82%

My specifications:

Microsoft Windows 7 Home Premium 64-bit SP1

AMD Phenom II X4 955 -- 55-60?C when gaming

4.00 GB Dual-Channel DDR3 @ 666MHz

MSI 870A-G54 (MS-7599) (CPU1)

767MB GeForce GTX 460 (MSI) -- 40-72?C when gaming (depends on game)

466GB Seagate ST3500418AS ATA Device (SATA)

This freeze occurs in any game I play. I recently had a problem with my system overheating, the CPU reaching max temperatures (65?C), but I fixed that by vaccuuming the insides of the computer, particularly the fans. No game gives an error message except Guild Wars 2, which only mentions an "unrecoverable driver error". I can't give you the exact error message as of this moment because I have to play for a while before it happens. I'll update this thread as soon as I get the error message again.

I should also note that sometimes the system recovers, resulting in a black screen for a few seconds and then the game starts up again. This at least doesn't mean that the system is tired, because this happened once in Guild Wars 2 (and recovered) and then I kept playing for many hours more.

I hope I've given you sufficient information. Let me know if I haven't.

Answer:Freezing during a game -- "unrecoverable driver error"

sounds like a video driver issue. Have you tried downloading and installing the latest driver?

2 more replies
Relevance 82.41%

Trying to fix my friend's laptop. She claims she was watching a youtube video and all of th sudden the computer started acting up and so she rebooted the computer and now it won't boot past the xp logon scren. Comes up with the error: "data execution prevention; userini logon application" with the only option of close message. windows does not contiue to boot and just sits there. I have tried to boot into safe mode but it only gives the option of booting into normal xp media center. tried last known good config and same results. any ideas?

acer aspire 3050-1594
AMD Sempron 3400+
xp media center
 

More replies
Relevance 82%

Hi guys, first off I haven't been here for help in years literally this was the first place I thought of because a few years ago many generous people helped me solve my problem, this place is awesome. Please pardon me as I am only decently literate with computers but try my best.

Ok I am trying to solve an annoying problem for my parent's computer. My dad was typing a normal document in Microsoft Word (OS is XP with System Pack 2, and it is Word 2002) and he said that just yesterday for the first time, after typing for maybe a half hour, a window would pop up with a "runtime error" and it would freeze untill he clicked ok on it, and it would then shut down loosing all his work that he didn't save.

So I got on the computer and opened Microsoft Word, and was able to duplicate the problem time after time but not every single time. When I simply open word, then click to close Word, the box appears, and he verified it is the same box he saw. It says exactly as follows, no more, no less, and every time reads the same -

Microsoft Visual C++ Runtime Library
Runtime Error!
Program:C:\Program Files\Microsoft Office\Office 10\WINWORD.EXE
abnormal program termination

So I tried to research it, and came across a fix on Microsoft's support site saying remove something called COM Add-ins. I did so by following each step removing the one COM add in i found, and it did not resolve the problem at all. It still errors out. SO I grabbed the master disk and un... Read more

Answer:Solved: Microsoft Word keeps throwing up "Microsoft Visual C++ Runtime Library" Error, Arghh!

First, welcome back!!! (although, vaguely, it's like seeing your cousin after many years at a funeral...nice to see you, sorry about the circumstances....)
Well, this isn't fun - the more I looked, the more "answers" and causes I found...
http://en.allexperts.com/q/Microsoft-Word-1058/Microsoft-Word-29.htm
http://support.microsoft.com/default.aspx?scid=kb;en-us;835404
http://support.microsoft.com/?kbid=555220
(I think you probably did what the above is about - COM add-ins)
and two that seem similar, but aren't the same (good ol' MS!)
http://support.microsoft.com/kb/259413/
http://support.microsoft.com/kb/921541/en-us

Good luck and let us know if you get this fixed - and what did it!
 

3 more replies
Relevance 82%

hello,
I use an auction building/submitting program called "auctionsubmit". Just did yet ANOTHER category update to keep up with eBay's unending quest to drive everyone crazy. Program was working fine prior to the update. Now I can open it but can't use some of the functions such as the "extra" option where you would select a second category or gallery pictures. I get a "runtime error 200". Can someone PLEASE tell me how to fix this?
Thanks,
Jan
 

More replies
Relevance 82%

Hello out there;

I am not quite sure where this is being generated from and I do not know how to shut it off or make it quite doing this. I have installed Microsoft office 2000 premium on my computer, which has Front page. I have installed the entire program. Since I have done this it appears that every time there is an error on a webpage that My computer now tells me. "Error: A Runtime error has occured. Do you wish to debug?" then it tells of the error. " Line: 1 Error: syntax". I of course have 2 options, I have said yes on an occation or 2 and find that some unkown to me program opens called Microsoft Environment Editor or debugger. I fished around in this program for a few minutes and must have inadvertantly changed something, cause now When I click yes this program does not open, However I would like for this program to stop asking me if I want to fix these websites.
Does anyone know what is going on with this, and how I can stop it or correct it?

Thank you

Markeysl
 

More replies
Relevance 82%
Question: Runtime error "91"

Wife uses drug reference program in medical transcription. All of a sudden program is giving: runtime error "91" :" Object variable or width black variable not set. "

I can get the program to load in safe mode, but not regular mode. Using Win XP Pro SP1 on Gateway 600X w/1024 ram. This is not the only problem on this machine, but the most pressing.

Went to Microsoft web site and the technical gobbledegook means nothing. How do I "explicitly add the Everyone group to the trigger service permissions in DCOMCnfg.exe". (see what I mean) Help would really be appreciated!

Thanks!
Jim
 

More replies
Relevance 82%

When I start the computer I get the following error when it tries to start. Then I hit the close button and then the computer stops with the grassy field screen.

Run time error '5':
Invalid procedure call or argument

Running Windows XP Home edition on an HP Pavilion.

Any suggestions? Thanks in advance.
 

More replies
Relevance 82%

I cannot open User Accounts in Control Panel, I keep getting ...

Microsoft (R) HTML Application host has encountered a problem and needs to close.

Anyone with a fix? . My appreciations in advance!
 

Answer:"User Accounts" in Control panel wont Open-Error is "Html application Host Error"

Do you have a recovery restore install disc or partition?
You can try doing a repair or system file check...
Scan For Missing/Corrupt System Files...

Windows XP comes with a wonderful tool called System File Checker (SFC)
Itscans and verifies the versions of all protected system files after you restart your computer...
To Do This:
Click Start menu, and then click the Run icon.
In the small box that Opens, type the three letters: cmd then click the OK button.
In the command prompt window that just opened (a black background and white text), type the following command:
SFC /scannow
And then click OK
You must be logged on as a member of the Administrators group to run SFC..
You will need your Windows XP CD during this procedure if SFC needs to get an original file. Please remember that Windows XP can have multiple instances of a .DLL file and remember which version is for which program.
Notes....
I have been asked if it is possible to have a "progress meter" show when SFC runs... This is the registry hack you need. PLEASE do not go messing with your registry if you do NOT know what you are doing!
System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
Value Name: SFCShowProgress
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = disabled, 1 = enabled)
 

1 more replies
Relevance 82%

Hello,

I need help with this Diskette issue please. "Diskette Drive 0 Seek Failure"
I've had this problem a few times in a couple of years and I have been able to fix the error by pressing F2 and going to the SETUP. And I've done this with no issues. But this time I thought I fixed it but now I get this new error: "A disk read error occurred Press Ctrl+Alt+Del to restart". After I press Ctrl+Alt+Del it takes me back to the same error massage "A disk read error occurred Press Ctrl+Alt+Del to restart". Need help please. This is a Dell Desktop, Windows XP.
Thank you.

Sue
 

Answer:"Diskette Drive 0 Seek Failure" Error Then "A disk read error occurred Press Ctrl..."

9 more replies
Relevance 81.18%

Hi All-
When i open my web application URL in IE 6.0 on XP Machine then my IE get closed automatically and when i check the System Log then in Under Security Log tab it display an Error with description:
"The Windows Firewall has detected an application listening for incoming traffic".

Event Type: Failure Audit
Event Source: Security
Event Category: Detailed Tracking
Event ID: 861
Date: 11/26/2007
Time: 7:29:48 PM
User: ABC\AAA
Computer: XYZ
Description:
The Windows Firewall has detected an application listening for incoming traffic.

Name: -
Path: C:\Program Files\Internet Explorer\iexplore.exe
Process identifier: 3840
User account: XYZ
User domain: ABC
Service: No
RPC server: No
IP version: IPv4
IP protocol: UDP
Port number: 3971
Allowed: No
User notified: No

Please help me what is the cause of this problem and how can i ratify this issue. All help in this is highly appreciated well in advance.

More replies
Relevance 81.18%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

Answer:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Relevance 81.18%

"Where" into what folder do i load a new game.?
my computer loaded a game into a folder that cant be accessed.. this could be the source of many of my game problems

how do i set them up to all be in the same place and have them all work .. i couldn't find it in C:/ i only found it by clicking 'Custom Download" during reinstall

it showed up in a folder listed there, and i was able to track it down.

it is not listed in "Un-Install Programs and Features" .. can i delete it from there, and download it somewhere else.. like the Windows Game list... which would be really handy.. how do i do that.???

sorry to be such an annoyance, i built a computer to play games and ..it seems to need tweek'n to play them..

ANTEC 900 Case.
ASUS Rampage Formula X48.
Intel Xeon 3110 3MHz Core2 Duo.
VISTA 64bit Home Premium.
Silent Knight2 CPU cooler.
8GB OCZ Reaper HPC DDR2 1400.
2x Western Digital Caviar 500GB HD RAID1.
VisionTec Radeon HD 3870 1 Gb.
Cosair 750 watt PSU
OPTI UPS Battery Back Up.

Answer:when i download a game and get "Typical" or "Custom" where do i

Your sentances don't t really make too much sense of the problem.. You download games and try to install them but can't access the install files? Or when you install them you can't access them..?

Make sure you are the administrator of your system

4 more replies
Relevance 80.77%

Hello there!

Would love some help! I bought the new KohanII Kings of War game, downloaded all updates, but the game will not play as this comes up instead, "ChangeResolution failed, NiRenderer Error"...any suggestions as to how to fix that?? I would GREATLY appreciate the help!
 

More replies
Relevance 79.95%

Yesterday a friend pointed out to me that my website has been listed as an attack site by Google and I went to check it out. Apparently hackers had gained my FTP password (I now know FTP is not secure D: I didn't before) and injected iframes with javascript into all my HTML files to download malware. In the process of cleaning up the problem, I accidentally viewed an infected 404 page and now I am trying to make extra sure that my computer did not download any malware.

Now, here's the rub, though: I don't exactly know what my computer might have downloaded. :/ The Google alert is over here: http://safebrowsing.clients.google....ujin/elipsis.jpg&client=googlechrome&hl=en-US and it suggests trojans and "scripting exploits" (I'm not sure if the scripting exploits just refers to the iframes or not...I am kind of dumb about computers ;p)

I have run both Spybot (turned up clean) and Norton AntiVirus in Safe Mode as well as normal mode. Norton found a trojan in my System Volume Information folder called "A0104722.exe." It was quarantined and then deleted. On the advice of a friend I also downloaded HijackThis and ran it. I will post a copy of the log file below for your perusal.

I'm sorry I can't give more information on what malware I may have downloaded. :/ I can really only tell you that I might've downloaded some and that they were most likely trojans (although I don't know which ones specifically). Any help... Read more

More replies
Relevance 79.95%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

Answer:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Relevance 79.95%

I installed an old game (Hexen II) and I chose to install both the normal version of the game as well as the GL version of it. I can run other GL games, but not this one. When running the normal version, it has a flickery horizontal bar effect and freezes on the game loading screen. When I run the GL version, I get three errors, and the game never runs. The errors are: "Genport I/O initialization failure", "grSstSelect: non-existent SST", and "wglCreateContact failed". All of these errors only give the option to choose "OK". What might be wrong?
 

Answer:Old game errors: "Genport I/O initialization failure","grSstSelect: non-existent SST&

6 more replies
Relevance 79.54%

im not sure why windows vista is doing this error how can i fix it The application error "0x7c919af2"referenced memory ae"0x00000010" the memory could not be written'

there shouldnt be any reason it has happening on several applications from games to ie fire fox has done it as well if u can help i would be ever so gratefull
 

Answer:vista The application error "0x7c919af2"referenced memory ae"0x00000010" error

Hi, let us have some Pc specifications.
Check and post
TSG System Information Utility - found here.
http://static.techguy.org/download/SysInfo.exe
======
Download Security Check by screen317 from.
http://screen317.spywareinfoforum.org/
Or
http://www.bleepingcomputer.com/download/securitycheck/

Save it to your Desktop.
Double click the install icon.
If using Vista or Win 7 - right click the icon - run as Administrator
A command Prompt window will open.
Let it scan the Pc - press any key when asked.
It should now open in Notepad.
Copy and Paste the result of the scan in the reply box below.

The saved log will be called checkup.txt.
 

3 more replies
Relevance 79.54%

Hi;
Had a sudden inability to go much further than a third or forth-level download on ANY given webpage and then PC would seize-up, requiring "cont+alt+del" in order to get freed-up. Thought perhaps I picked-up a bug of some sort during a recent google search, and went immediately to Panda and Trendmicro to perform both virus as well as malware scans. While the Panda scan was loading-up, I received the following error message....

... " DoPatch....dll reports error....Error "C:\WINNT\patch.utp"....unreadable or not a patch file..."

Was able to complete both scans. Nothing found other than tracking cookies.

I then did a file serch for the above and located it. It was installed TODAY apparently, and not by me, within minutes of the problem starting.

I'm guessing someone/thing slipped this patch into my WINNT file or modified it while I was doing the google search, so I have included a HJT scan below.

Hope this all makes sense and ties-out to something. Any help would be genuinely appreciated-
thanks
Webz

__________________HIJACK SCAN BELOW__________________________
Logfile of HijackThis v1.99.1
Scan saved at 12:42:23 PM, on 5/11/2005
Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\system32\LEXBCES.EXE
C:\WINNT\syste... Read more

Answer:"DoPatch" error message - "dll reports error" causing pc to seize-up (HJT attached)

Bump for HJT expert
 

1 more replies
Relevance 78.72%

Fix for "Tuner Not Found" error and "Receiver service has stopped working" error listed in next post! -- Errors I'm receiving: "Tuner Not Found""Windows Media Center Receiver Service has stopped working.""Welcome - An upgrade is currently in progress."SpecsIntel P4 3GHz2GB RAMVisionTek Radeon X1300Hauppauge WinTV PVR-150 PCI IIWindows 7 32bit1. Tuner Not FoundOkay, the entire install went without a hitch. On opening Media Center I was told that I needed to setup Live TV. When I click the link I was given the dreaded "The TV signal cannot be configured because no tuner hardware was detected." If I run WinTV from Hauppauge I can view TV just fine.MCE ran fine this morning on Vista SP1 before the install.For the tuner issue I have done the following:-Reseated the card-Updated the drivers-Uninstalled the hardware and rescanned/installed the hardware and drivers-All Windows Updates-Uninstalled all references to Hauppauge on the machine and installed JUST the drivers, no Hauppauge software-Adjusted Log On preferences for Windows Media Center services to Local and manually started ehrecvr and ehsched along with cmd line manual starts-Downloaded new codecs from WinDVD and MSFT-Run the WMC Decoder Checkup Utility from MSFT and changed to Miscrosoft DTV-DVD Video Decoder (the utility recommended I change to this -- only one that is MCE compatible -- but once I did it told me that it is incompatible with sync on WMP10 and that... Read more

Answer:*RESOLVED* Media Center "Tuner Not Found" error, "Receiver service has stopped"

Okay, I resolved the first two issues, Tuner error and ehrecvr error.It had to do with multiple Admin user accounts on my computer. My computer was originally set up with a user Robert Baker with full privileges as administrator. I then also set up a MediaCenter account with full privilidges. For whatever reason the MediaCenter account has access to EVERY action on the computer except starting the ehrecvr service.1.  First set Media Center Service Launcher to log on at NT Authority    Services > Right-Click Windows Media Center Service Launcher > Properties > Log On tab > Log On As 'This account: ' > Type " NT AUTHORITY/LocalService " > Click Apply > General tab > Start service.2. I then set the Media Center Scheduler Service AND Media Center Receiver Service to log on as my other admin account. Same as above but with other account credentials and started the services.3. Reboot and no ehrecvr errors. Since this was a good sign I tried WMC and was able to set up my TV fine.I STILL, however, get the "Upgrade in progress" message when I open Media Center. Anyone know how to fix that? I've run setup again and can't get rid of it.

19 more replies
Relevance 78.31%

Hope this query is in the right section -tried to use my LDS 1881 England Census CDs last night - but having problems with the Viewer.

I have V4 which up to now has worked perfectly - tried to re-install it
and I keep getting "Failed to extract file "Dll_ini" from binary table"
error message.

BUT no problems on my laptap which has the Viewer installed from the
same CD.

Have had a few problems with computer of late - it was in the workshop
3 weeks ago because of some corrupt Windows files - could that be the
problem?

Grateful for any advice, suggestions as to what to do!
 

More replies
Relevance 78.31%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

Answer:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Relevance 78.31%

I'm running Windows 7 on a DELL XPS. Before this happened a disk scan was running and I reset the computer before it was finished. It restarted the first time, but by the time I got back to the computer it was on the "Strike f1 to retry boot" screen.I've tried turning on CAPS LOCK, NUM LOCK & SCROLL LOCK and hitting ALT - E,F,B, but that did not seem to work. I don't know if I did the combination work or something, but I tried a variety of combos and none of them seemed to work. I also tried reloading the default settings in the Boot options menu and that did not seem to help either. I've read resetting the BIOS is a possible solution, but I'm not sure what the next step is at this point.Any help would be greatly appreciated.* UPDATE: I just ran a diagnostics test and it said Error Code 0141 - No Drive Detected

Answer:Getting "Strike f1 to retry boot" "Error Code 0141 - No Drive Detected"

Its having issues detecting the hard drive. What is the exact make/model number of this computer?Curious as to why you didnt allow it to finish properly? Did it take forever getting hung at a certain point of the scandisk in which you told it to reboot because it was not progressing further? I have a strong feeling you will need to replace the hard drive. The system sensed an issue with the drive before it died and it attempted a scandisk to try to repair, and right now it sounds like the issue with the drive got worse from the point in which the system detected a scandisk was necessary to correct for errors.

14 more replies
Relevance 78.31%

I've been having some problems with my computer and I've always somehow managed to work my way around the issues spyware/malware etc. have created but lately it's been getting out of hand.. Some time ago I got a virus or something that made the entire tab under "Processes" dissapear. So I could not see process-names in the task-manager. I have re-installed XP but this problem persists. I have been using a different application to monitor and handle processes.

The problem now is the constant pop-ups generated from this fake anti-virus program calling itself "Anti Virus Pro 2007" or something.. It pops up with fake commercials, and even attach itself into other explorer-windows while I view other pages.

As popups and messageboxes keep popping up, I close them, but after a while windows will open a messagebox telling me "Buffer overrun detected in e:\Windows\system32\explorer.exe" (or \\windows\explorer.exe I don't remember really but you get the idea) and explorer.exe will be terminated, sometimes taking some internet explorer windows along with it, other times explorer.exe just starts up again and all my windows remain.

I used to have Norton but was forced to remove it as it was sucking up all my CPU. It rendered my computer useless, as I mainly use it for gaming.

I've also experienced having the connection between me and my modem broken while beeing on the internet, and I don't know if my computer actually is offline or if -I'm- just... Read more

Answer:Infected - "Win Anti Spyware" "Buffer overrun error" and a fake dialer or something++

Hello and welcome to TSF

Please download ComboFix

Note: It is important that it is saved directly to your desktop.

Close all browsers. Double click combofix.exe & follow the prompts.
When finished, it will produce a log for you. Post that log in your next reply.
Note: Do not mouseclick combofix's window while it's running. That may cause it to stall.

You are using an older version of HijackThis. Please do the following to download and install the latest version of HijackThis v2.0.2:

CLICK HERE to download the HijackThis Installer:Save HJTInstall.exe to your desktop.
Double-click on HJTInstall.exe to run the program.
By default it will install to C:\Program Files\Trend Micro\HijackThis.
Accept the license agreement by clicking the "I Accept" button.
Click on the "Do a system scan and save a log file" button. It will scan and then ask you to save the log.
Click "Save log" to save the log file and then the log will open in Notepad.
Click on "Edit -> Select All" then click on "Edit -> Copy" to copy the entire contents of the log.
Come back here to this thread and paste the log in your next reply.
Do NOT have HijackThis fix anything yet! Most of what it finds will be harmless or even required.

You may delete the older version once you have successfully downloaded and installed the latest version of HijackThis v2.0.2.

Expected logs:

Combofix.txt
HijackThis log

19 more replies
Relevance 78.31%

I am using a WD Proxkey DSC and while signing I am getting the following error"
"The Windows Cryptographic Service provider reported an error: The parameter is incorrect. Error Code: 2148073511"

More replies
Relevance 78.31%

as described in the title when i boot my laptop: http://www.newegg.com/Product/Product.aspx?Item=N82E16834117780R
i get the "disk read error -> press cntrl alt del to restart" message. I then tried to access the backup partition through f10 only to run into this error "status : 0xc00000e9 Info : an unexpected I/O error has occurred" it seems that it cant communicate with my hard drive.

I read a few other forum posts but didnt see anyone have the 0xc00000e9 error also. Bios boot priorities are in order if that matters.

Is there a fix without having to replace the entire HD and buy a new vista installation(preinstalled w/ no disc in the box).

Im very reluctant to take it to a service center as i can very likely fix it myself (with the help of the friendly people here of course), only problem is im having a little trouble..finding.. my HD in this damn notebook.. heh, ill figure that part out. new to notebook repair.

Thanks in advance. Danny

edit: found the HD, doesnt look like it even uses a cable, just plugs right into what i assume is the mb. dont know if that helps just supplying what i can.
 

More replies
Relevance 78.31%

I use Windows XP. I boot from my 40gig HD and have an 80gig slave drive. My computer's worked great untill 2 days ago. Now whenever I boot up, it does the usual cd rom and floppy drive noises then it shows a black screen that says "A Disk Read Error Occured. Press CTRL ALT DELETE"

So I CTRL ALT DELETE it and then it tries to boot up and says "Error Reading Operating System". It alternates between these two messages when I reboot

Here's the thing though, After about about 20 minutes messing with the computer (turning it off and on and restarting multiple times), it will finally load windows and work just fine. All my data is on my hard drive and everthing runs smooth. But then it will give me the same errors when I try to boot up the next time.

What can I do?

Answer:"Disk Read Error" AND "Error Reading Operating System"

Tried using your XP disc to repair the OS ?

9 more replies
Relevance 77.9%

im trying to install itunes + quicktime. when i try to install these i recieve an error message: installshield, 1607: unable to install installshield scripting runtime. can anyone help as its really annoying. thanks
 

Answer:installshield scripting runtime error

Error -1607: Unable to Install InstallShield Scripting Run Time
 

1 more replies
Relevance 77.9%

Anyone tried deleting a registry key in Windows 7?  Got "access denied" or "Error while deleting key"?
The usual response is, "You need to run regedit as an administrator".  but I *AM* logged in as Administrator, and running regedit as administrator, trying to assign administrator full permissions on that registry key in order to delete it!!  
Am I mistaken, or isn't Administrator supposed to be able to administer and control all the settings on the computer, in order to set it up for the "Average Joe" user?
So, under the permissions menu of that key, go to advanced, change the owner from System to Administrator, and try again.  It's no longer saying "access denied", but "Cannot delete xxxxxx. Error while deleting key".

The scenario: Basically, the wireless has stopped working on a laptop. The device does not show up in Device Manager, but is in the registry, so the normal procedure is to delete the registry entry for the device in HKLM/System/CurrentControlSet (and /ControlSet001) /Enum/PCI    ,then attach the device or restart the computer, it finds the "new" hardware and reinstalls it. Easy!...

Not with permission restrictions on the administrator account it's not!  So I need to give myself permission, to give myself permission, to do a simple task like delete a single registry key!  Why, Microsoft, why???!!!  Please just make the Administrator accoun... Read more

More replies
Relevance 77.9%

Windows XP SP2

Ok, I tried some things in other threads but to no avail. But some threads are having my same problems. First this about:blank crap is always my home page even if I change it, as well as these porn links in my favorites list. I've run scans with 5 different virus/ adware scan programs but it doesn't fix it. However, it got even worse-- I can no longer open things like My Computer, My Documents or even Control Panel to try and uninstall software. When I try to open any folder my computer freezes temp. and I get the following message: "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience."

PLEASE Somebody help me. I have hijack this, if that helps. AHHHHHHHHHHH!!!!!!
 

Answer:Solved: I can't open anything "Dr. wtsn error" & I can't remove "blank: about" adware.

14 more replies
Relevance 77.9%

I only get the BSOD when playing games, not any specific game, but any, sometime i can go a whole week of playing games and have no BSOD at all, and somedays 5 minutes after a game is running it will BSOD everytime, all day long. When I try to Run any game like GW2 Or Inquisition my pc turns into Bluescreen with an error CRITICAL_PROCESS_DIED or KERNEL_DATA_INPAGE_ERROR ..I've already Updated all my drivers and reinstalled all my games, also run chkdsk /f and memtest with no problems.


This is the screen:

Also this is my dump config:
(note that i have windows 8.1, not 7)

Still it doesn't create any File or Folder and when the BSOD happens the blue screen say that its collecting info but it doesn't get off 0% .
It's the same with the critical process died it just goes to the blue screen saying its collecting info but it also doesn't get off 0%.

I'm completely baffled with what to do as the blue screen view hasn't picked up anything and i cant find the dump files.
 

Answer:"Critical Process Died" & "Kernel Data Inpage Error"

Hi BTW, welcome to the TSG Forums....

You may find this from the MS Community helpful. If Greek is easier to understand than this article then come back to this Forum and someone will help you.

http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/windows-81-bsod-kernel-data-inpage-error-and/b67ae41a-9228-4462-9c53-d1f5d115f784

T.
 

1 more replies
Relevance 77.9%

I have upgraded 5 machines and clean installed 3 machines.

Experienced an issue with one machine with continuous corruption problems

After the 3rd attempt I discovered that even with a Clean Install of Win 10 I get unrepairable errors - Sorry I don't have screen captures of the "exact" wording:

(Just to be clear, I have not installed ANYTHING ELSE, other than Windows 10 and the corruption is unrepairable immediately)

Heres what I did to find the issue;

Open CMD in Administrator (type cmd in Cortana search bar, RIGHT CLICK and select "Run as Administrator")

After using command:

sfc /scannow

Windows reports errors which cannot be repaired

Running the following command should repair the issue:

DISM /Online /Cleanup-Image /RestoreHealth

BUT DOESN'T - You get this message:

Deployment Image Servicing and Management tool
Version: 10.xxxxxxxxx
Image Version: 10.xxxxxxxxx
[==========================100.0%==========================]
Error: xxxxxxxxx
The source files could not be downloaded. Use the "source" option to specify the location of the files that are required to restore the feature.

For more information, review the log file.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

I have tried a few different options, including mounting the ISO and directing the DISM command to look directly on the mounted drive

Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:D:\sources\install.wim:1 /limitaccess
(where "D" i... Read more

More replies
Relevance 77.9%

Hey guys, I'm having a bit of trouble with the board. I'm using Firefox 1.0.4 and I'm seeing just regular text instead of these buttons. I'm sure I probably fudged something in Firefox, but I can't figure out how to fix it.

Any ideas? Thanks!
 

Answer:Strange error using forum buttons ("Go to first new post", "View first unread", etc.)

get myie2
 

8 more replies
Relevance 77.9%

While using "Windows Explorer" as an FTP client I have put the system into a state where any attempts to access an FTP folder from "Windows Explorer" produces the following dialog:
Dialog Title: "FTP Folder Error"
Dialog Icon: Information Icon
Dialog Text: "Windows cannot access this folder.  Make sure you typed the file name correctly and that you have permission to access the folder.  Details: No more Internet handles can be allocated"
Dialog Buttons: OK
I had used the "Add a network location" feature of "Windows Explorer" to add an FTP site.  The FTP folder appears under "Computer" in the left panel of "Windows Explorer." 
It is not mapped to a drive letter.  I then initiated a large FTP transfer operation by using drag-and-drop from the FTP folder to a local folder.  A portion of the transfer completed as expected but after some time it produced the "No more Internet
handles can be allocated" error.  When OK was clicked the transfer was terminated.  In this case I am using large to refer to many thousands of files and directories to be transferred as opposed to a small count of files having many bytes.
After the initial error dialog is cleared with the OK button and the transfer is terminated I can then reliably reproduce the dialog.  Any attempt to open an FTP network location
from "Windows Explorer" will produce a n... Read more

More replies
Relevance 77.9%

I have an IBM thinkpad (a friend of mine) that I'm trying to see what's wrong with it.  Whenever you start it up, it runs through the diagnostic tests and eventually provides the message listed in my subject.  I attempted to press f12 during one of the reboots since i saw something on here from someone else that had luck but didn't really see anything i felt comfortable about changing.  After i exited, it began rebooting and displayed the error "No operating system found".  I then turned the power off and began receiving the same message as i originally got "a disk read error occurred".  Before i received the computer, my friend was told the hard drive was shot and there was no hope in retrieving any files.  Is this true?  Any help would be greatly appreciated. Thank you,Frank

Answer:"A disk read error occurred" "Press Ctrl+Alt+Del to restart"

Quote from: Katman_09 on October 29, 2010, 05:04:19 PM...Before i received the computer, my friend was told the hard drive was shot and there was no hope in retrieving any files.  Is this true?....Your description seems to indicate this is true.

2 more replies
Relevance 77.9%

I just resolved an issue I had with the wireless connectivity of my Acer notebook computer and now I am getting strange error messages. When I try (not every instance) to open device manager I will get the message "Failed to open empty document." From there I will occasionally get "Parser" messages that say "Value creation failed at line 843" or "line 422." I read what I could find about these messages and it points to MMC as the cause. How do I go about fixing this annoying problem if anyone knows?
 

More replies
Relevance 77.9%

Hi Everyone,

i am using CRichEditCtrl::GetLine() function to read the text from a dialog.
If my text contains any space character then it is throwing improper argument error and the application getting closed in vista only.....
What is the actual problem ????? why it is happening with vista only...?

Please suggest

More replies
Relevance 77.9%

I have a big problem here,
I have used my hard disk for 9month,
Yesterday when I watched movie on the half way,
My hard disk suddenly disfuntion,
And I thought my laptop problem due to always lagging so I restart my computer.
But after that I can't read my hard disk (WD)in my computer.
It can read in computer management there.

Ways I try:
1)I try to uninstall and reinstalled again,BUT it doesn't work.
2)I try to unchecked the hide folder and device at view.
3)I try to update the software BUT it still disfunction.
4)I try to use disk management and initialized it BUT there appeared CANNOT INITIALIZED Due to I/O device error.

Any solution for me ?

Answer:Hard Disk can't read in "my computer ", "initialized",I/O device error

The most usual cause is that the Hard Drive is beginning to fail. Back up your stuff. Go to the website of the manufacturer and test the drive.

8 more replies
Relevance 77.9%

hi can u help me about instruction at "0x7c9100c8" referenced memory at "0x666f7260" it always appear every 4 hours and then my computer start counting for shutdown or restart. help please . . .

More replies
Relevance 77.08%

I keep getting error 1607: Unable to install InstallShield Scripting Runtime.I went to the site and did everything they suggested, but it won't work. I can't install almost nothing now. I even tried the system restore. Anyone wanna help?Edit: I am using Win XP Pro SP2.

Answer:Installshield error 1607 Scripting RUntime

D you have Administrative privileges on this computer?If not...have the Adminstrator install the prgram for you.

3 more replies
Relevance 77.08%

Okay, I have an ATI Radeon 8500 on my Windows XP system, and one day, after my dad had used the computer, the 3D video driver stoppeed working. He can't recall doing anything. So it goes. I think "whatever", downloaded the latest Catalyst drivers, and try to install it, only to get the message "INF Error, Video Driver Not Found" and then "Try to set up your adapter with a standard VGA driver before running setup". I tried googling for info (apparently it's a common-ish issue), but I never found anything that worked. I tried uninstalling anything ATI and then installing, to no avail. I tried uninstalling the error-listed VGA adapter from the Device Manager and then running install which didn't work. Rebooting after that also didn't work (it popped up with "New hardware found" after the reboot, but it couldn't find the proper drivers).

After an unedifying series of adventures I got to http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=45&kind=1 which has several drivers for my mobo. I first downloaded (obviously) the VGA driver, and tried to run setup. Unfortunately, after preparing the install, an Error message pops up saying "The system cannot detect the device, please confirm that the device is configured properly and restart the setup program." I then tried downloading the AGP upgrade, installed it, but nothing changed. I also downloaded the BIOS update, since it mention... Read more

Answer:"INF Error", VGA Driver "Missing" Installing ATI Catalyst Drivers

the radeon is not integrated with your motherboard, and the onboard video has probably been disabled in the BIOS. to install the appropriate drivers for an ATI radeon 8500 card you need to download and install the drivers from ati's website. from there you can download the latest version of catalyst and install that.
 

13 more replies
Relevance 77.08%

My computer gets the following Error Message everytime I try to go on Fire Fox, Restore to an ealier date, go to a website from a web address in an email in Outlook Express, download certain software or downloads:

XUL Runner
Errorlatform version 1.9.0.4 is not compatible with min version>=1.9.0.5. max version<=1.9.0.5 .

I am able, however, to get on the Internet with Internet Explorer. When I Clean the Disk, the number value of stuff to erase increases rather than get wipped out. It is now up over 300,000 MB's. It slowly started at 25 MB's and has grown very, very slowly. I Clean the Disk and Degfrag every time I use the computer.

My system is a Dell Dimension 3000 using Windows XP Home Edition.

This ubiquitous error message constantly pops up and blocks me from doing certain things. I have tried Restoring the computer to an earlier date. I have used the Dell drivers to try to clean the hard drive, but I am blocked.

I first noticed this in early November 2008. The Verizon Anti-Virus System did nothing to alert me to any viruses.

I have spent a good amount of time trying to solve the problem, but it is out of my knowledge of information.

Any help is appreciated.
Thanks
Zyklon
 

Answer:Error Message "XUL Runner" Platform Version "1.9.0.4" not Compatible

Ok let us start simply
This may just be a corrupted install of firefox or and incompatability issue with a add-on.

Some Firefox issues can be resolved by downloading a new Firefox installer from Mozilla.com and then closing Firefox, deleting the Firefox installation directory and reinstalling Firefox. (On a typical Windows install, you would delete the C:\Program Files\Mozilla Firefox folder and then reinstall Firefox using the "Standard" Setup Type.) Another option would be to uninstall Firefox and then reinstall into a different folder location, which is done using the "Custom" Setup Type on Windows and choosing a different Destination Folder for the install location (e.g., C:\Program Files\Firefox3). [3]

or for a completely clean install of FF

* First, download an official version of Firefox from Mozilla.com (or download Firefox 2 if your system can't run the current version) and save it to your desktop or other location. Avoid unofficial download sites that bundle Firefox with other software such as the Google Toolbar.
* Next, completely uninstall your current version of Firefox as outlined in Uninstalling Firefox. (Note that removing the Firefox installation directory will also fix some problems related to old or incompatible browser plugins on Windows systems, by removing plugin files that may be contained in the C:\Program Files\Mozilla Firefox\plugins folder.)
* Important: If you haven't already created a new Firefox profil... Read more

2 more replies
Relevance 77.08%

Wanted to resurrect an older thread, but its closed :
http://forums.techguy.org/windows-xp/652638-error-moving-file-folder-directory.html

Please read completely before responding.
I am a 30 year IT pro, most of it as a programmer. I am the geek in charge of a tech non profit org in Hawaii. www.HawaiianHope.org
so yea.. i have at least half a clue.

Here is the deal.
In doing drive copies, data recoveries, etc... when we are moving a mass amount of data from one drive to another we run into this problem a lot.
"Error moving file or folder" -- "directory is not empty"
If you restart the move, it will continue on and keep going, restart enough times and eventually it will move all directories.

I think its a programming issue with windows and wonder if anyone has a work around ?

I have a suspicion that the copy process is getting out of sequence. That it is trying to move a folder before it actually emptied it. Possibilities are :
1) windows forgot its place in moving through and navigating numerous sub directories and it is having a problem with “recursive calls.”
2) Computers with hyper threading or dual core processors are spawning the movement of files across multiple processes, and some are getting ahead of the other.
3) It did actually move the file, but the cache or something in memory has not updated, or the full data write has not completed yet before it tried to move the directory. (delayed write)
Yes, you can copy and then delete the old... Read more

Answer:"Error moving file or folder" -- "directory is not empty"

This is a known issue. It is by design.

As you may know, moving is in its essence an unsafe process. It would be better to use the actual sequence of copy and then delete.
 

3 more replies