Computer Support Forum

WD 250GB hard drive wont move my files

Question: WD 250GB hard drive wont move my files

Hi, Im new to the forums.

Im having problems with my external harddrive i backed up all my data so i could sort out my virus problem which i used the removal of viruses guide on this site. After, my computer was "cleaned" i plugged in my harddrive and and it was recongnized by Vista but when i try to move all my data back to where it belongs it wont move back. Could this be a virus problem or is my system in need off a proper virus "hunt" and a good virus "clean". i can access the files they just wont go on my computer

Thanks,

Sam

Could it be my hard drive infected with a virus is so tell me how to remove it

Relevance 100%
Preferred Solution: WD 250GB hard drive wont move my files

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: WD 250GB hard drive wont move my files

What happens when you try to transfer files? Do you get an error message? You'll need to be more specific than 'it doesn't work'

3 more replies
Relevance 88.56%

Hi everyone, I hope someone can help me.

As the title says my external hard drive wont allow me to move/copy my files back to my laptop. its a Seagate 500GB external hard drive which I have owed for a few years now with not as much use as id like. I can view photos and other files play videos and music off it but when I go to move a file over to the desktop it pops up with a windows explorer tab showing it has stopped working. which is weird as it has nothing to do with windows explorer then it seems to reload the main screen. I've attached a video showing the problem in the hope someone can diagnose the issue. I did just manage to send a photo and a music file using email back to my computer from the hard drive so its not impossible to get them all back but that would take forever haha. Any help I really would appreciate it and promise once fixed IL use a online cloud service as I know hard drives don't last forever.

it seems I cant upload the video which is annoying as it would make it easier for people to work out the problem.

HARD DRIVE DOESNT SEEM TO BE THE ISSUE!!

sorry I thought this was down to just the hard drive but I've just tried copying a file on the desktop screen and then pasting the copied file onto the desktop screen and it seems the issue is happening with the laptop same problem with the windows explorer tab popping up with the message windows explorer has stopped working followed with another message saying windows explorer is restartin... Read more

Answer:external hard drive wont move/copy files back to laptop

10 more replies
Relevance 85.69%

I'm trying to upgrade from the 30GB Toshiba harddrive that came with the unit to a Western Digital Scorpio Blue 250GB EIDE drive.
I take the swap the 30GB out for the 250GB put in a bootable version of XP SP3 CD-ROM and nothing - no sign that any power is getting to the drive.
The CDROM tries to write boot files to the hard drive but nothing happens.

Same thing happens when I try to use the 3cd pack from Toshiba or the recovery CD from Norton Ghost.
The computer is not seeing the drive. Put the old 30GB drive in and it boots up right away.

My BIOS settings show it to be set up for EIDE and to boot from the CDROM. What steps am I missing?

Answer:Satellite 2410 wont see new 250GB hard drive

Hi

It looks like the BIOS does not recognize the new HDD? I assume it?s too large?
The Satellite 2410 series is old and I assume it will not support bigger HDD?s than 120GB due to the 28bit LBA

So try with smaller HDD like 80GB or 100GB.

Greetings

2 more replies
Relevance 73.39%

i have recently installed two hard drives one running xp and one running linux. I have dvd files on my xp hard drive that i would like to move to the other. Is there any way of doing this?

Answer:move files to another hard drive

????? The "linux drive" is the slave? Why?...the slave isn't bootable. Format the thing with windows. This is a confusing thread to say the least!

4 more replies
Relevance 73.39%

Hey, I'm running XP. I was wondering how I move files from a cd onto the hard drive. When I enter a cd into my disk drive how do I transfer it so that it is now on my hard drive even when you remove the CD.

Thanks

Please respond
 

Answer:Move CD files onto hard drive

10 more replies
Relevance 73.39%

I installed a second internal hard drive that worked fine at first, but recently I was not able to move files onto it. I can play movies and move things from it, but when I try to put something on it, the message box telling the progress seems to freeze, and after a long time, I just close it. My computer is normally fast enough to do this in a couple seconds.

Answer:can't move files onto hard drive

We're gonna need way more info...

2 more replies
Relevance 73.39%

Mine is a desktop running Vista ultimate I have been working with a 40 gig drive. I have added another 500 gig drive. There are two SATA ports on the Intel main board. So far so good.It occurred to me that if I did a clean install of Windows on the new 500 drive I could avoid swapping any malware to the new drive. So:I did a clean install of Windows on the 500 drive with the 40 drive unplugged. Then:I reconnected the 40 drive and copied the files I wanted (documents) to CD drive. Looking good so far as I check the files on the CD.I booted from the 500 drive and, alas: I can't see anything on the CD...I unplug the 500 drive and boot from the 40...The files are there where I left them on the CD.I know that there is a flaw in my understanding, but it seems this should work.Any Ideas?Ivan Copas

Answer:How to move files to a new hard drive.

Easiest solution if they are both SATA drives would be to DLoad and use the Free utilities from the 500G manuf site and "clone" the 40G to the 600.Then you completely remove the 40G and setup the 500 as the boot drive and walla ! !...you're good to go.The 40 can then be hooked up as a slave...formatted and used for storage.PS: This will work even if the 40 is an IDE...post back if you need more info.

2 more replies
Relevance 73.39%

ok i have a Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive and i need to the max of hard drive i can run or allow on my DEll Optiplex 740  small factor tower plus  also need help about if i can upgrade my  ADM Athlon Dual core Processor 4850e  and higher?

Answer:want to upgrade my hard drive Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive

Any 3.5" drive at 2T or under should work fine.  Upgrading the CPU would mean buying used - these CPUs went out of production not long after your system was current - and that was a decade ago.

2 more replies
Relevance 73.39%

Hi guys, computer's running a lil bit slow and wont allow me to install my new mobile phone software as c drive memory is full, i've tried my best to move things to the d drive hard disk but its still really full...

is there any safe way of transferring most of the programs and files over to the second hard drive?

many thanks,
jen
 

Answer:Solved: how do i move files from c drive to d drive (both hard drives)

11 more replies
Relevance 72.98%

Hi!

I have windows 8.1 and c-drive is system drive.
Programs are mainly installed to C: but I have also some programs installed to E: Program Files, Program Files (68), Program Data etc .
Now I want to to move E-drive contents to another hard drive (all files stored on e-drive).

I think the safest way is to reinstall all programs, but I don't want to do this. Also it is possible to move files to new partition which has another drive letter than e: and create link, but this I don't want to do either.

Can I do it like this:
1) Change e-drive letter to x
2) Create new e-drive to another hard drive
3) Copy e-drive contents to new e-dive
4) that is it?

Can I use normal copy - paste to copy all files?
I think register references are the same after these steps because drive letter and content of the e-drive are still the same.

Does my method work? It sound so easy to do. Is it "too easy"? Does it have any risks?

Best regards
Laakspen

Answer:Move program files to another hard drive

Yes, it should as long as the drive letter is the same and also I would move instead of copy to retain the ownership of the files.

8 more replies
Relevance 72.98%

http://www.techsupportforum.com/images/smilies/wave.gif

I have a Dell XP that must be old because I am. Anyway I ordered it with two hard drives, both 30Gig. Both are full. Who knew back six or seven years ago that 30-gigs was (were?) not enough?

I have tried to keep C:/ for programs and D:/ for files. I would like to get an external HDD and move programs onto it in order to free up space on C:/

What kinds of problems will I run into? Will the registry be able to keep up or tag along or edit itself or...? Is it even doable? Will it give me nightmares?

Thanx!
http://www.techsupportforum.com/imag...4-dontknow.gif

Answer:Move program files to new hard drive

There is no real simple way to do that. the only way I know of is to uninstall the programs one by one and reinstall them point at the external drive instead of the C:\ Drive. the best way to do it, in all honsty is to just buy a larger hdd (500gb are around 50.00 these days) and just do a direct drive to drive clone from your old HDD to the New one. A Program like Symmantec Ghost (it's not free but there are others out there that are) will clone everything at a bit level and automatically resize the partition to encompass all the free space.

Just Moving the Program Files directory will only serve to make the programs non-usable. Registry entries will not follow the move.

3 more replies
Relevance 72.98%

I recently got a Solid State Drive to replace my other HDD & kept the HDD as a secondary storage drive.
Can I move the program files folders (Program files, Program files x86 & Prgram data)to the secondary drive to free up some space on the smaller SDD which has my windows installation on & Warcraft.
If I can, can I just drag & drop them?
I'm assuming I'll need to replace my desktop shortcuts as they won't follow the programs.

Answer:Move Program files to 2nd hard drive?

You will need to uninstall the programs you wish to remove from the SSD and then reinstall from the setup files to your secondary drive. Make sure you use custom install selecting the secondary drive path as your target for installation.
The reason you cannot just move the folders is that the program installations involve registry entries and by moving the folders these will be corrupted and the programs will not work.

2 more replies
Relevance 72.16%

Hello,
I currently have a computer that will not properly boot, so I was wondering if there was a way to move all the files from my current hard drive to an external hard drive, then format the hard drive on the computer and reload the files I know are "clean" or would my only option be to buy a new hard drive, install windows xp on it, and then move the files from the old hard drive to the new one?

Thanks.

-Jason

PS I have a 160gb maxtor external hard drive and a 160gb hard drive in my Dell Dimension 8400. I can also boot to the recovery console, but safe mode is quite difficult to access and I'm not 100% if I can even access it anymore. If you have any other questions just ask.
 

Answer:Move Files to external Hard drive to format

16 more replies
Relevance 72.16%

I have been moving some DVD's (iso and avi files) from my hard drive (C) to an external hard drive (I). At this point I have 45.8 GB of free space on my Hard Drive (C) and I have 62.1 GB of free space on my external hard drive (I).

Every time I try to cut a file from (C) and paste it to (I), I get a message: "cannot copy_____: there is not enough free disc space. Delete one or more files to free disk space and then try again." Generally each of these files I want to move is about 4.4GB. There would appear to be ample space on both the sending and receiving drive to handle 4.4 GB. But what do I know.

I have done disk cleanup, and even used Revo Uninstaller to clean out all temporary files, cookies, Remnants, and my recycle bin.

What do I need to do to cut and paste (or otherwise transfer) the files from (C) to (I)?

Thank you in advance. TSF people have always been able to help me on a timely basis.

Answer:can't move files from hard disc to external drive

Hi Ron!

Try a smaller file - just to see if that works. Try a text document.

15 more replies
Relevance 72.16%

I have a Western Digital USB 160GB External Hard drive attached to my system for storing music albums on. I copy them over using Media Player 10 and scan the sleeve and use this as the thumbnail. I store these ablums in folders A through Z. However, quite often I find that when accessing this drive that some of the files have moved back to the root folder of this "J" drive (where they were originally copied to before sorting them)for no reason. Also, very often, the thumbnail associated to some albums has been replaced by the windows default picture. Anyone point to what is causing this. The file attributes to each folder (Read Only and Hidden) are not checked.Thanks in advanceM Wilding

Answer:External Hard Drive files move for no reason!!!!!

Dunno, something to do with file association?

3 more replies
Relevance 72.16%

Hi everyone. I am trying to move three JPEG pictures from a floppy to my hard drive. Unfortunately I keep getting an error that says:

Cannot copy "filename": Cannot read from the source file or disk.

What do I do?
 

Answer:Can't move JPEG files from floppy to hard drive!

9 more replies
Relevance 72.16%

Hey
Basically I bought an SSD to put Windows 7 on along with some of my most used applications.
However, I want to some how put my users folder and program files folder onto my 500GB HD. I?ve tried multiple times to mess with the registry settings but it doesnt seem to work..? I?ve also tried an application but that just meant when I restarted my PC it diddn?t recognise my user account meaning I couldnt log in at all forcing me to reinstall again?
Any ideas? I basically want only OS & a coupel of aps on SSD while having my desktop/users/prorgam files on my 500gb.
Thanks!

Answer:How can I move my user&program files to a different hard drive?

Well this trick may help
User Folders - Change Default Location
Once you've moved the location you should be able to just copy the contents in question.

2 more replies
Relevance 72.16%

I have an Acer Aspire One netbook that I was running Linux on (Ubuntu 12.4) I had gotten a virus on my netbook and installed Ubuntu so I had a working computer again. Just today, I purchased a Dell Inspiron laptop, 15R, running Windows 7. I put all the files from my netbook onto a seagate external portable hard drive and when I plugged it into my new computer it will not open without reformatting. I need these files off of this, and I know there is a way, I just do not know it. help! Thanks in advance
 

Answer:Move files from hard drive on Windows 7 without reformatting.

What file system is the external HD? Did you format it on Linux or did you use the filesystem it came with?

One thought it if you still have the CD you installed Ubuntu from, you could boot the new laptop from that--you don't want to install but use the Try It option to run Ubuntu live off the CD. Then see if Ubuntu can read your external on the new laptop. Create a new folder on the laptop's C: drive probably sda1 or sda2 (It will have both a Windows and Users folder to help you identify the correct drive) and copy your files over to the new folder.
 

19 more replies
Relevance 72.16%

Ok hopefully someone smarter than me can help me out:

Problem: I have a game image file I want to transfer to my external hard drive. When I try to transfer it it says my external drive is full. I have about 70 gigs of free space on the drive and the image file is 5 gigs.

I've tried to transfer them to 2 different external drives and both say the same thing, "Drive is full... blah blah blah." My friend has the same image file on his comp so I tried to transfer it to my external drive from HIS computer and same problem.

This leads me to believe the problem lies in the image file. .MDS files and .ISO files won't transfer for some reason. I've tried transferring other files of the same size (about 6 gigs) and they transfer fine.

All drives have been defragmented and error checked. Any ideas??

Thanks for your help!! If you solve my problem I'll take you out for a big steak dinner if you come to Canada. Thanks!!!!

AlexW
 

Answer:Can't move my image files to external hard drive!!!

I'm going to guess the hard disk is formatted FAT32 and not NTFS. This limits file sizes to 4gigs, anything larger will result in such an error. You need to convert the drive to NTFS for this to work.

Start, Run, CMD

CONVERT x: /FS/NTFS /X

where x: is the drive letter of the external drive.
 

2 more replies
Relevance 71.34%

Hello. I have a Dell Inspiron 9200 notebook. I take a lot of pictures and noticed they are taking too much space on the C: drive. Yesterday I purchased an external hard drive (Western Digital 120GB). How do I move the photos? I currently sort the photos with Adobe Photoshop Album 2.0.
Can I later on download photos directly to the hard drive?
 

Answer:Solved: Move notebook files to new external hard drive

6 more replies
Relevance 71.34%

ADMIN: Please don't move this topic. This is NOT related to my previous post regarding indexing. Please leave this topic here.Hi allGlad I found this forum. Hoping one of you uber smart people can help me figure out wtf is going on in my computer. Long story short: I have a Seagate external drive hooked up. I back all my data up to it. The other day I accessed it and to my shock ALL FILES were gone. Poof. We're talking thousands of files. Weird though, the folder structure/tree was still completely in tact!! Every folder is there, it's just the files that are gone. I used Recuva This and got about 60% of it back. The other 40% is gone forever I guess. Very sad as there were about 500 family images that we lost.Anyway, I add more files to this drive about three days ago to test. Sure enough they TOO are gone now but their folders are still there! Ugh! Important to note these files are NOT going to the recycle bin for some reason. They are just being zapped from the drive somehow.SOMETHING/SOMEONE is making my files disappear. This drive is NOT being shared on the network. I ran scan disk and no errors were found. Here is my HT log:Logfile of Trend Micro HijackThis v2.0.2 Scan saved at 2:56:07 PM, on 1/31/2010Platform: Unknown Windows (WinNT 6.01.3504)MSIE: Internet Explorer v8.00 (8.00.7600.16385)Boot mode: NormalRunning processes:C:\Program Files (x86)\SUPERAntiSpyware\SUPERAntiSpyware.exeC:\Program Files (x86)\LivePerson&#... Read more

Answer:PLEASE DONT MOVE THIS TOPIC! Files disappearing from hard drive -- please help

Was Nod42 and Nod143.exe virus. Eradicated. So far so good. Thanks for all the help guys. ;)

3 more replies
Relevance 70.52%

I had only 1 hard drive c with only 12 % free space . I had a new hard disk added on hard drive d. I used the following software programs clean disk which did clean temporary files etc., search & destroy to get rid of spyware & diskeeper lite to defrag hard disk. i also removed unwanted programs from add/remove programs. The most free space I could get for free space is 14 %. I have windows xp pro os .I don't have the cds because when i had the pc built all the software was installed but the vendor never gave me the cds for any of the hardware. I would like to increase the free space on hard drive c by moving what ever files or programs i can to new added on volume d. What ever programs files etc I can "automatically " move to hard drive D if possible.Any other advice about this problem is appreciated. Any suggestions greatly appreciated. Also, does any one know that offers A + certification courses "online" with hands on experience? The reason i ask about hands on experince becuase i beleive that is the best way to learn about just about any topic. Being a radiological yechnologist & nuclear medicne technologisy i think it' very important to correlate what one learns fron class to apply that to hands on experince. I am presently unable to work because of a lumbar spine injury & am very interested in learning about building computers & trouble shooting problems (A + certification) with hands on experience. Any advice is much a... Read more

Answer:how to move files & programs from drive c to added on new volume hard disk d?

You can just drag and drop data files from C: to D:, but any programs you want to move will have to be uninstalled from C: and reinstalled on D:
 

2 more replies
Relevance 68.88%

Hi! I do not know when and why did this happen but whoever invented this paranoid (hidemysecretsfrommywife) control system of sharing and permissions should be declared as the Enemy of Mankind, or the Antichrist!
I can understand that one wants to protect C: from malwares. But have you seen a malware attacking an external drive???

I have Windows7, I have an external drive where I store all my pictures taken and my music files. I already tried everything advanced sharing and so on. Still: I can only create a new folder with a right click in the drive or inside existing folders but I can not do anything else. The disk is write protected, check write permissions.
In fact, the disk isn't write protected.

If I create a new folder, I can put in it and do whatever I want inside the new folder. But I have no permission to do anything outside a new folder, i.e. with my original media files!

Why? Who does benefit from this? What is this craziness???

Answer:[SOLVED] No permission to create/ move, copy, delete files in external hard drive

Hi akofalvi.

Try this:

1. Start > Run "cmd" (this opens a command prompt window)
2. type--> diskpart (this will open another command window in a few seconds)
3. type--> list volume (this will list all of the volumes currently recognized in your system)
4. type--> select volume # (this number is going to be your external drive)
5. type--> attributes disk clear readonly

I will say this: this procedure has been met with mixed results and your problem may return. Some have even had this issue and it turned out to be a setting in Windows Media Player of all things (whoda thunk?) One responder in a forum had this to say about this very problem: what i found to fix this was to remove the settings in media player allowing it to re-organize and rename files, after which i went to the tools/advanced/restore media library and allowed it to dump my current library and reset it. That's just an FYI.

I hope that'll help. Let me know.

Good day!

Mike

PS: As an afterthought, you may need to log in to the REAL administrator account (which needs to be activated manually) and set your permissions there for your regular user name. We'll go down that path if the above procedure doesn't net you anything positive.

1 more replies
Relevance 67.65%

i recently bought an internal seagate 250gb hard drive and when i installed it it is only finding 232gb i was wondering how i can access the other 18gbs if that is possible. i have seen the 137gb barrier but not something like this. all help would be appreciated.

Answer:250gb hard drive not full 250

its the way that windows reports space compared to the hdd manufactures. the hd manufactures report a meg as 1000 KB, while windows reports it as 1024 KB. no over a large amount of storage (say 80gb) the number will shrink, but the space is still there (will be reported as 74.5GB in windows). so what you have is normal.

2 more replies
Relevance 67.65%

I am new to this forum and have a question.

I have a new computer with Windows 7 home basic on it and all works well. Except the external harddrive of Iomega 250GB USB 2.0. The computer doesn?t see the drive. On this drive is are the backups of files that I want to install on this new computer.
How can I solve this problem? I googled for drivers but cannot find anything.

Answer:Iomega 250GB USB 2.0 Hard Drive

it shows nothing at all in computer? what if you unplug the usb then plug it back in again while windows is running? does anything happen?

and please fill in your system specs it may help if someone else sees this thread

5 more replies
Relevance 67.65%

Hi beautiful people,

Currently im using a 60gb partition for windows 7 32 bits ultimate in a SATA HD (AIHC mode), i've been told in the past that it is not recommended to use the entire HD as one partition cause slows the system (the needle works more), is that still true?

Answer:Windows 7 in a 250GB Hard Drive

To a certain extent yes, It is better to have one partition in the top of your drive to hold your system files (programs, drivers, etc) and another partition to hold your data. This will help your system run faster.

However, you cannot just rely on this alone. You should do regular disk cleanup using a program like CCleaner (don't use the registry cleaner option) and defragment your hard drive regularly as well.

9 more replies
Relevance 67.65%

I attempted to add a 250 GB hard drive to my PC, 3.0 Ghz, GA-8S648FX MB with 1 Gig DDR Ram. When I boot my PC and go into the bios, it sees the PC, however when the PC boots it doesn't show it in control panel or in "My Computer". I am running Windows XP Pro 2nd Edition and am frustrated. I have the most current bios for my motherboard and Gigabyte says it should be no problem on their end. So what am I doing wrong? I have tried both setting drives as Cable Select and also Master/Slave. I have tried setting it up with the original Windows XP Pro disk but it only sees 137MB. Any ideas? I got a real good deal so I bought 2 of these 250 GB drives for my PCs, too bad they can't see the. BTW, both PCs are the same motherboard only difference is that one of the PCs is a 2.8 Ghz CPU (INTEL). Thanks

Answer:PC won't format 250GB hard drive

Try going to the drive manufacturers website and download their tools and use this to format. There is an issue with drives above 137mb but I thought this was solved with XP.

4 more replies
Relevance 67.65%

Hello guys.. newbie here.. just want to seek help regarding HARD Drive replacement , for some reason my laptop wont boot upit only does lights (LED) but will not continue to boot or show the logo/ BIOS so we suspected probably HArdisk problem - in that sense we decided just to BUY a new hard drive and replace the existing 160GB with a 250GB.. Now im not sure if this is compatible enough with the MoBO..and the bios..MODEL : LENOVO 3000 G430 just bought it 4months ago here in Hong Kong.. Advice & tips is appreciated. http://www.vatgia.com/pictures_fullsize/tut1254386189.jpg

Answer:is it ok to put a 250GB Hard drive replacement?

You probably can't update the bios in the machine's current condition and if it's only 4 months old that's probaly unwarranted.Check the size to make sure it slot 1, 2 or 3 ( Different thickness) and bring the old HD with you to the store.Also check to see if the HD is IDE, SATA or PATA. It should say on the HD. If not then check out the spec sheets for your machine. Didn't save them? Try doing a search on here. Good luck with that though, I've seen rubber duckies drown with the level of support that Lenovo offers.Ensure that you have the recovery disks or make them any way you can.Good luck to ya bro.

1 more replies
Relevance 67.65%

If I attach my 250gb hard drive to a 6 yr old mobo, should it recogise it?I purely want to be able to run the maxtor powermax dos util software and won't be booting into windows at all.thanks.

Answer:250gb hard drive and 6yr old mobo

Only way to find out is try it.

6 more replies
Relevance 67.65%

Hello, We have a customer who has an R40 that we replaced the drive with at their request for more drive space. The biggest drive we could go with was a 250GB drive. Since we installed the drive, the R40 has found it way back to the shop a couple times for a bad hard drive. We use only NEW drives. The drives have been WD 250 ide notebook drives. The original drive was a 40GB in size. In talking with a colleague form another shop, he suggested that the power supply and battery could play some role in this problem. The laptop battery does not hold a charge. The OS is XP Pro with SP2, the computer does see the entire 250GB when installed, this is seen in My Computer and in the BIOS. Can anyone give a suggestion as to what might be causing the larger drives to not last in the R40. The R40 isa Type 2723-LU2. I would appreciate any advice in troubleshooting this. It could be time for her to move to a new laptop. Thanks, Peter

Answer:R40 on it's third 250GB hard drive in four months

well i don't think the R40 has the shock protection system that came in the later T and R series. This means if the laptop experience constant shocks of some magnitude, this may cause faults to develop in the larger hdd, as the fault tolerance level of these new drives are slightly less than the smaller capacity drives. Usually bad sectors or other mechanical faults may develop, if the the drive head routinely crashes into the platter.   

3 more replies
Relevance 67.65%

Hi all, hopefully someone can help?Approx 2 years ago i bought a Medion portable hard drive from my local Aldi. Everything has been fine until today when the connection seems loose. If i connect the hard drive to the cable and plug it into my laptop the hard drive turns on, but the laptop doesn't recognise it, and says its malfunctioned.How do i go about fixing it if at all, and have i lost everything on my portable hard drive.Many thanks,Chris

Answer:Medion 250gb Hard Drive

You could probably disconnect the drive and use it in another external caddy.Before buying another caddy you need to know whether the drive is a SATA or PATA (IDE) probably a SATA if only two years old.

4 more replies
Relevance 67.24%

Ok, I just built my own custom computer with a little from my friends. And we got it all running and working now, however Windows XP Pro is only detecting the 250GB as 130GB, and this is even when we "formated," and partitioned with Windows XP Pro.

Its not the Hard drive, because we built 2 of the exact same (1 for me and 1 for my bro) however its happening on both machines.

Any help, without wipping the currect data on them? (We've already transfered the data from our laptops to the new computers with our 5pc network)

Answer:250GB Hard Drive detected as 130GB?

What kind of hard drives are these? There might be a Bios limitation you need to overcome.

25 more replies
Relevance 67.24%

Good Morning:I have Xp on one drive (120Gb) and Vista on another drive (200Gb) although I could move that one to another 120Gb drive.I also have a 250Gb Western Digital USB2 external drive which I would like to partition to make it a back-up for the two operating systems.Can anyone point me to an easy (and cheap) program to do that. And, will it be a problem to copy across since the 200Gb only contains about 110Gb currently?Thanks in advance!

Answer:Partitioning 250Gb external hard drive

click here|623991677&gclid=CP38iLSsh4cCFTeEEAodQ2pAZA

9 more replies
Relevance 67.24%

Hi there, I've got a 250gb maxtor HD and it can't be detected in bios or something is wrong. WHENEVER its connected (either on its own or with another drive), it says "error loading OS".
(PC boots fine with my other Maxtor 120gb HD)

On some sites it says to set Bios HD Access to LARGE instead of auto/lba etc

BUT - my bios doesnt show me such a setting when i go into HD config screen. I know what screen it should be on, but believe me, there is no "large" option for HD access.

Motherboard = MSI MS-6567


Can someone pls help me?? Thanks so much

Dom
 

Answer:BIOS won't recognise 250gb Hard Drive

Well, error loading OS only shows that it can't load an OS. Do you have an OS on that drive?
At bootup, your BIOS should list the drives it detects. Do you see the Maxtor in the list (next to the optical drive)?

That's a rather old motherboard. It could be that it simply does not support hard drives larger than ~130GB. And I can't see a BIOS update that would fix it either.. You can try updating to the latest BIOS and hope that it fixes the problem of course.
 

4 more replies
Relevance 67.24%

Greetings,
I have been helping neighbour with their Lenovo-b50-80. It originally came with Windows 8.1 and I have upgraded it to Windows 10 and after a few hiccups is working perfectly.
The next stage of upgrading this laptop is to clone the 500GB original drive to a 250GB Samsung SSD using Aomei Backupper Standard 3.2 and Aomei Partition Assistant 6.0

When I go to Disk Management I find that the disk has 6 partitions. Most of which are probably linked to recovering the OS back to Win 8.1
I would like to get rid of all unessential disk space and so I thought I would ask for your suggestions.
At this moment all the files including Windows.old are located on the C: drive.
Many thanks,
s.


 

Answer:Resizing Hard-drive To Clone To 250gb Ssd

So I found https://support.lenovo.com/gb/en/documents/ht077144. Towards the end of the page is this image;




Which is 2 partitions short of the Lenovo in #1. The 2 missing 1. Lenovo D: drive NTFS partition and 2. 1000MB partition.
Maybe I should keep them all...
s.
 

13 more replies
Relevance 67.24%

I bought a Seagate hybrid hard drive listed at 250GB. when I look at the disk using Acronis disk Director it show the disk size as 110GB. I know the actual size is usually smaller than the listed size but more than 50% smaller? Seems bogus to me.
 

Answer:250GB hard drive only shows 110GB

16 more replies
Relevance 67.24%

Hello, I've recently done a clean install of Windows 7 Ultimate and one of my harddrives is not showing up correctly. The harddrive itself is my Local Disk D, it hasn't got any system files on it however it is displaying at the wrong size:

The problem lies in the fact that on boot my Computer's BIOS detects the harddrive as a 233GB harddrive. This is not a problem as I understand that the harddrive itself isn't the exact size as what it says on the box, however the Windows 7 installation and Windows itself only detects the harddrive as being 148gb.

What I've Tried Doing:
I've tried different things to resolve this issue. I've looked at the Disk Management, but there are no extra partitions and I've also looked at the harddrive in Partition Manager which again only picked up 149gb and no unallocated space.
I've run a partition recovery tool in Partition Manager which did not detect any lost partitions containing the rest of the harddrive.
My System:


Code:

------------------
System Information
------------------
Time of this report: 10/18/2010, 18:30:10
Machine name: SAM-PC
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: To Be Filled By O.E.M.
System Model: To Be Filled By O.E.M.
BIOS: BIOS Date: 09/23/03 17:35:41 Ver: 08.00.09
Processor: AMD Opteron(tm) Processor 146, ~2.0GHz
Memory: 2046MB RAM
Available OS Memory: 2046MB RAM
Page File: 890MB used, 3202MB ... Read more

Answer:IDE Maxtor 250gb Hard drive Problem.

Hello samboyd93. Welcome to the forum.

The only thing I can think of is that the drive is set as a SATA2 drive on an older computer that only does SATA1 (please fill in your "My System Specs" to help avoid these kinds of guesses) although I doubt it.

If you look at the back of the HDD there are jumper pins. Setting a jumper sets the SATA speed on most drives. You may need to consult the HDD's documentation to see what the different jumper positions do. Every manufacturer has a different setup.

I would try setting the drive as SATA1 to test. But both drives should be at the same setting. Also try plugging the problem drive into a different port or using a different SATA cable. Can't hurt, might help.

You should also go into your BIOS and check the settings for that drive and compare them to the settings for the other drive. They should be the same.

Hope that helps.

9 more replies
Relevance 67.24%

I have recently fitted a Hitachi Deskstar 250gb Hard drive(model:HDS722525VLAT80) to my computer.

After Re-instaling windows (xp) the drive was showing as 125gb.

I have been told this is because windows xp will only support 125gb without service pack 2.

I have now downloaded SP2. but it still shows as 125gb.

Any ideas what I can do to fix this????????????
 

Answer:250gb Hard drive shows as 125gb

When you partitioned and formatted the drive, it didn't have any service packs, so it limited the format to what you see. If you go into Disk Management, you'll find that you now have about half the drive listed as "Unallocated". You can create a partition on this section and format it, then it will be available for use as a new drive letter.
 

1 more replies
Relevance 67.24%

I previously used windows xp and just went and bought a new hard drive and windows 10 usb. Im confused. I installed the hard drive along with my old master drive, using it as slave i presume. Will it auto partition the new hard drive

Answer:Clean install on a new 250gb hard drive/

no instructions came with the hard drive

2 more replies
Relevance 67.24%

I think this must be fairly new but I cannot find any info or specification on HP website or with a search on Google. I particularly want to know if its file system is NTFS or FAT32 as my PC is Widows XP with NTFS. Maplin are the only people I have seen who have it on the shelf -not even Amazon have it as they still push the ?previous? 250GB model from HP.

Answer:HP ELEMENTS 250GB External Hard Drive

Cancel this thread as data now found.

1 more replies
Relevance 67.24%

Ok guys the story so far i have recieve my new 250GB hard drive my bios recognises it as a primary and a slaveall ok so far, XP doesnt recognise it in my computer settings but does if you go to control panel system then device manager any ideas below previous postingP.s. how do you turn below in to the words CLICK HEREclick here

Answer:Hard Drive + Cables 250Gb Continued

You need to go to right click on My Computer and choose 'Manage' then Disk management.You will see the drive in the list. Right click on the left hand box and choose 'initialize'. When this is done right click on the right hand side and choose 'New partition'. When you have done this right click again and choose 'Format'

10 more replies
Relevance 67.24%

I previously used windows xp and just went and bought a new hard drive and windows 10 usb. Im confused. I installed the hard drive along with my old master drive, using it as slave i presume. Will it auto partition the new hard drive

Answer:Clean install on a new 250gb hard drive/

no instructions came with the hard drive

5 more replies
Relevance 67.24%

Hi all,

A friend of mine is having problems with a 250GB Seagate Hard drive.

It was bought from a computer shop and they fitted it for him. When he took it home the computer didnít recognise it. It then recognised it as 250gb, but his Windows OS wouldnít work properly (it would some times work and other times wouldnít).

He had the drive refreshed, re-formatted and had the partitions removed and rebuilt. Its then that 130GB disappeared.

Does anyone know what may have caused this (sorry I havenít given much info, but this is all I know) and if so, whether itís fixable. I have suggested that the drive be taken back to the shop that it was bought from, under warranty.

If you need any more info, please ask, and I will try and find out.

Any help would be appreciated.

Thanks in advance.
 

Answer:250GB Hard drive only shows 120GB.

7 more replies
Relevance 66.42%

Ive been reading around and noticed that problems like this are fairly common. Im having troubles finding something that applies to me. I have a Dell Dimensin 8100 P4 1.4 GHZ, its sorta old i guess, it was a relatively new P4 computer i think. I just bought a Hitachi GSX 250GB ATA-100 IDE 8MB Buffer hard drive and havent been able to get it to be recognized at more than 127GB. I tried updating my BIOS (went from Revision A02 to AO9) but that didnt make any difference on the drive. DO i have to wipe the drive and start over with the blank drive or what? I also read that XP Home needs SP1 to recognized more than 127GB so i downloaded SP2 and it didnt make a difference. If anyone can clear up why this isnt working thatd be great.Thanks Alot
Brian
 

Answer:Solved: 250GB Hard Drive Only Showing as 127GB

12 more replies
Relevance 66.42%

Hi there,

My Sister owns a ASUS laptop running Windows Vista and has a portable hard drive (WD 250GB) which she uses to back up her files and to store her business files and personal files (music, photos, videos etc.) however, i plugged it into my MacBook to transfer files onto it. Now when i try to plug it back into her Asus, it doesn't recognise it and when "Computer" is opened the hard drive is displayed as "Local Disk (G". I am able to double click the text, but a window pops up saying "You need to format the disk in drive G: before you can use it." But i do not want to format the hard drive because the files on it aren't backed up. I've tried plugging it back into my MacBook, but that doesn't recognise it either.

Any help would be fantastic!

Thanks
 

Answer:WD 250GB Portable Hard Drive requesting format

you may need to rename it as for example in her comp that may have been E drive and in mac F drive so drives have gotten mixed up
try vista disc management if you can see it there change drive letter, or try in safe mode, ie connect drive with comp off then re boot into safe mode
 

1 more replies
Relevance 66.42%

Hello all. I'm hoping someone can help me. I have a 250gb maxtor hard drive. I have just purchased my second external case off of ebay and it does not work!!

The first one was no name brand, it says "Awesome" on the case and has lights that light up around the case. It said on the web it supports up to 250gb, and on the auction. When I plug it in, it recognizes it and I can view an play files off of it for maybe 5 minutes then it says "USB device not recognized" and gives errors like "this usb device can run faster on USB 2.0" which it is in a 2.0 port. Funny thing is right when I got it, it worked for a few hours, it kept working pretty well at first for maybe a week, then it just stops working after a few minutes.

So I purchased another one on ebay, another non name brand, it said it supports up to 250 gb, and this one it recognizes it for a few seconds and then it is suddently not on my computer at all. I have checked the device manager under both of these items and for drivers, etc. Everything seems to be working fine. I even downloaded a file that helps your computer recognize high disk space, although I was told on XP I don't have to do that. So what do you all think?? Is it just the cheap external case?? I have a Dell Inspirion 1100 with a celeron processor, purchased 1.5 years ago. I have tried the case on other computers that were better than mine, I have tried the hard drive straight into a computer and it works fine. I have the... Read more

Answer:Need help with getting 250gb hard drive in external case to work.

mmm... i had a problem like that with a flash drive. it worked for a couple of months, and then it just randomly disapperaed, and when i plug it in, it is not recognised anywhere atall on the system where it should be listed. i have never been able to solve that one.

2 more replies
Relevance 66.42%

I recently upgrade my PC, and have installed a NEW 250 GB S-ATA Hard drive.
My bios has been upgraded, and when in the BIOS setup it recognizes the drive as what it should be, 250GB, When I was installing XP and creation a partition thru the intall progam it only let me setup a 131GB partition. I set up a 100GB partition and left the rest to play with afterwards. In the Computer management/disk manager in XP I have my 100GB partition and only 30GB of unallocated space to work with.

Does anyone know how I can resolve this problem?

Shamus

Answer:250GB Hard drive, Windows only allows 131GB partitionable

Since this was a fresh install you need to add SP2. XP came out with a 137G limitation which was addressed with SP1. SP2 has replaced SP1.

If you only want a single 250G partition there are a couple of ways to address it.

1) Install SP2 and then run Partition Magic to resize the primary partition to pick up the extra 150G.

or
2) Slipstream SP2 into your copy of XP and then start over from scratch with a fresh install.
Chas

2 more replies
Relevance 66.42%

Hi,

I'd like to upgrade my current HD to the Seagate 250GB Internal Ultra ATA Hard Drive. My computer is 7 years old this June, so I'm curious about whether it's compatible or not. My current HD's specs are located here: http://support.mpccorp.com/apps/specs.asp?ID=1971

Specifically: Embedded Controller Interface: (40 pin) EIDE
Physical Dimensions (H x W x D): 1" x 5.78" x 4"

I have the most recent BIOS update for my computer which was released in 2002. I run XP SP2, PIII 735 MHz, 256 Megs RAM. Do you think this upgrade would work or would I just need to toss the idea and get a new computer?

Also, the HD's specs are located here: http://www.bestbuy.com/site/olspage.jsp?skuId=8004679&type=product&id=1155848396138

Thanks so much,
James
 

Answer:Seagate 250GB Internal Ultra ATA Hard Drive

The 7200 hard drive wil give better data transfer, but on your system, p111, 735mhz, increasing your ram would help, I would say, more.
XP runs better with more memory.
Upgrading to a later cpu, and motherboard, would give your old pc, a new lease of life.
 

20 more replies
Relevance 66.42%

I'm not sure if the hard drive is failing, its an older IDE drive. I just formatted the drive and disk manager only shows it with 26.9GB and no other unallocated space. Is there any way to reclaim the lost space or is this a typical sign of a drive on its last legs?

Answer:250GB hard drive newly formatted only showing 26.9GB

Hi and welcome to SevenForums,
See what mini tool shows
Best Free Partition Manager for Windows | MiniTool Partition Free

3 more replies
Relevance 66.42%

I'm not sure if the hard drive is failing, its an older IDE drive. I just formatted the drive and disk manager only shows it with 26.9GB and no other unallocated space. Is there any way to reclaim the lost space or is this a typical sign of a drive on its last legs?

Answer:250GB hard drive newly formatted only showing 26.9GB

Hi and welcome to SevenForums,
See what mini tool shows
Best Free Partition Manager for Windows | MiniTool Partition Free

1 more replies
Relevance 66.42%

There is in regards to my SimpleTech portable hard drive and My new Dell Inspiron N7010 17R which has windows 7. It tells me that it can not recognize the device when I plug it into my USB port. It works great in my Dell Inspiron that has windows XP and my Lenovo at work that also runs windows XP. I have tried another laptop at my place of employment that has windows 7 on it and I get the same error message on that machine also. It has to be a conflict with the SimpleTech 250gb and Windows 7.
Your Help is very much appreciated!!

Answer:simpletech 250gb external hard drive & windows 7

Hi and welcome to TSF please try here to see if there is something at the support site for your drive to work with win 7 http://www.simpletech.com/support/support_downloads.php

3 more replies
Relevance 66.01%

I have a western digital 250 gig serial ata, and the other day I accidently screwed up the winlogon.exe system file so it was no longer accessable. I decided it was time to buy a new hard drive (maxtor)to have more space and so that I wouldnt have to format the wetsern digital and do a fresh install, this way I could just set the WD as a slave and transfer the files over to my Mator. I install the maxtor as the master and then install windows 2k on it. I then try goiong into my computer so I can start trasnfering my files, and the old hard drive shows up (Western Digital), however, the hard drive shows as 0 bytes, as used and capacity. The hard drive deffinately is not empty and has a cxpacity of 250 GIGS. What could be causing this, I really dont want to format my hard drive, thats the whole reason I bought the second one. Could this be like this because the old HD was installed with xp and the new one has 2000 on it?

Answer:Second Hard Drive Wont Show Any Files

Hello,

...Have you set the jumpers on your Hard Drives correctly?

3 more replies
Relevance 65.6%

I'd like to get a 250GB SSD in my T450s when I order it, but Lenovo is charging $280 for the upgrade. So I'm thinking to order a T450s with a conventional 500GB spinning hard drive and buy a Crucial 256GB SSD elsewhere for $105. I would save $175 plus have a 500GB hard drive which I could erase and format and put into an external enclosure and use for other stuff. My question is -- I'm going to order the T450s with the Windows 7 Professional installation, so can I easily swap out the 500GB hard drive for the Crucial 256GB SSD (I'm ordering from elsewhere), and reinstall/recover Windows 7 Pro from recovery discs? I'm assuming that recovery discs are included or can be downloaded. Or, could I restore to the Crucial 256GB SSD from the recovery partition on the 500GB hard drive? How would I do this? 

Answer:Order T450s with 500GB hard drive, upgrade to 250GB SSD

Download and install Macrium Reflect.  There's a free version that makes clones.  Clone the factory drive to the SSD, then swap it out.  You don't get recovery disks.   The recovery software, though, has the option of creating a recovery disk set from the recovery partition that is installed on the drive.  So, you could burn the disks and put them away as your recovery solution.  When you clone the factory drive, you have the option of selecting which partions to include on the cloned drive.  If you've burned the disks first, you can simply not select the recovery partition (which is typically lettered "Q") and just clone the system reserved and Windows partitions and save yourself the disk space on the SSD. Once you've got it set up to your satisfaction, and you have the disks, then format the factory drive to use for your other purposes. 

9 more replies
Relevance 65.6%

I'm running Windows 7 Pro and the only option I see when I right click on the drives are NTFS or exFAT.

Hopefully it will be something easy because I'm not at all handy with the command prompt, unless someone walks me thru it.
 

Answer:Need to format a 160gb & 250gb external USB hard drive to FAT32?

have a read ta this,maybe helpful... http://uk.wrs.yahoo.com/_ylt=A03uv8...54/**http://www.neurostechnology.com/node/407
 

2 more replies
Relevance 65.6%

This is not a repeat! It's just that I read somewhere about one needs to make sure that it is formatted to NTFS. My Windows XP Sp2 is formatted to NTFS so will this present no problem when I come to use the drive?

Answer:Maplins 250GB Western Digital External Hard Drive

No roblem.Used one for two years.

5 more replies
Relevance 65.6%

Maplins list this as 'New'. Price is £69.99 inc vat ex store. Has anyone got/know of this drive and if so what are their opinions.

Answer:Maplins 250GB Western Digital External Hard Drive

Ordered one from Amazon £11 cheaper, delivery due tomorrow.

2 more replies
Relevance 65.19%

I am trying to open a Vista Hitachi Sata drive on my xp machine, but it open the files.
Is there any drivers I need to download, or software?
Thanks
Dave

Answer:Vista Hard Drive Wont Open Xp Files

I guess I don't understand.

Your title says one thing, your post says another.

What do you mean by "open"? What files can you not access on the drive in question?

Louis

9 more replies
Relevance 64.78%

I am trying to install an hitachi hard drive into dell 4600 my bios auto detects but when I go into my computer in windows xp the drive doesn't show up... Can any one help me???
 

Answer:Solved: Installing Hitchi 250gb hard drive in dell 4600

8 more replies
Relevance 64.78%

This hard drive originally was in my brother's computer. He had XP installed, went to install Windows 7 and after the first reboot, it would just hang on the bios screen.

I played with the jumper settings and such, nothin'. Put it in a few other computers, nothin'.

I was just curious, is it something that can be fixed or should I lay it on my desk to hold down some papers?
 

Answer:Seagate Barracuda 7200 250GB Hard Drive - Stopped working

8 more replies
Relevance 64.78%

I dropped my laptop and the screen broke (at least that is the obvious damage). I was quoted about $800 to repair and replace it.

I don't want to buy a new different one right now for several reasons. Is it possible to just buy an identical used computer and switch hard drives (assuming the used one is in working order)?

I have a Gateway Solo 5300 with Win98SE, Office XP, and several other registered programs.

Thanks
 

Answer:If I move my hard drive to a different laptop will it move everything I need?

Yeah, that will probably work! You might have to DL a driver or two but Win98 moves pretty good from computer to computer...
 

3 more replies
Relevance 64.37%

I recently received the blue screen of death. I restarted it, and it continuously gives me the error "windows-delayed write failed" and this happens for multiple "folders" or something....
Anyway, after restarting again (or just turning it off because I cannot click on anything) it fails to boot up at all. I cannot even do it in safe mode. And when I could, I couldn't do anything anyway.
I CANNOT lose my files, and I was told to use the program UBUNTU to get the files off of my hard drive, and then continue to reinstall windows to wipe everything out. However I am very confused on how to do this. They said that UBUNTU is a watered down version of windows and I should be able to get my data and save it somewhere else, even though I cannot even get on my computer right now.
How will I be able to get this program off my CD when I put it in my CD drive, if I can't do anything on my computer?
AHHHHH HELP!!! PLEASE
 

Answer:Backing up files on hard drive (when computer wont boot up)

14 more replies
Relevance 64.37%

The Acer C: drive is now full and the Data D: drive is empty, but it is not recognizing it automatically. This computer is my brother's, he bought it new and has it at my house. It came formatted with no disc's and I'm not sure where his books for it are. Can anyone tell me how to activate the second hard drive so I can use itunes and download video, etc.

It would be very much appreciated. My brother uses the computer here but it has been here for at least 3 years maybe and the book is misplaced. He mostly uses it for youtube, facebook, and stuff like that and is less computer educated than I am at tech stuff, which isn't saying much.

Thanks in advance for any help.
 

Answer:Aspire AST690-UP925A 250GB SATA hard disk first drive full and won't go to 2nd

Boot into Bios, usually by hitting F8 as soon as the POST screen appears and see if the hard drives are both recognised. If the spare drive does not show in the Bios it either has a fault or it is not correctly connected.

What OS is on the PC.
 

7 more replies
Relevance 64.37%

Hi I'm Mark. I'm having a problem when it comes with my notebook [dell inspiron 600m] and my external hard disk [WD Elements 250gb]. when I connected the 5 pin cable of the external hard disk to the usb port of the notebook, the connection is seem to unstable or on-and-off, therefore making file copying impossible. The external hard drive and the notebook is in good condition, although I can't really figure out what seems to be the problem. I am also having a theory that this might be a power supply problem. I would be very grateful to someone who can help me about this matter..
 

More replies
Relevance 64.37%

Does anyone know how many milliamps this device draws?

The "Technical Specification" provides plenty of info but does not specify the actual current. All it says is that it is powered directly from the USB port. But I need to know exactly what the peak ma of this device is.

TiA

T
 

Answer:Western Digital My Passport Essential 250GB USB 2.0 Portable External Hard Drive

15 more replies
Relevance 62.32%

Hey Everyone,

I just got a Maxtor 120GB Hard drive, and I currently have a 30GB Maxtor in my computer at the moment. I know a lot about computers, but hard drive images are one of the few things I have little experience with.

I would like to keep my operating system, XP Home, and all of its programs, files, settings, etc all together. Basically, the currect exact state it is right now as if I'm on my 30GB. I've seen my school use images to put the same image on like 20 computers.

Trust me, I'v had to re-load program after program on my dads computer and I'm already sick of doing it, so I want to avoid that lol.

I'm pretty sure there is a way do to this, and if so, can you tell me how, or give me a link to something I can read so I can pull this off. Don't want to put a fresh install of XP and reload everything and re install programs and all that stuff.

Thanks!
David Waters

Answer:Move 30GB Hard Drive Data To New 120GB Hard Drive

Can I do this without CD's, because 15GB of data wont fit on a Cd...I wonder if there is a way I can like just move it over to the other drive or something. pls help.

Thanks!
David

9 more replies
Relevance 62.32%

I use hdclone to move all my data from a 40 to a new 250gb but it is not the size my new 250 is reading 37gb and 7gb left
 

Answer:I use hdclone to move all my data from a 40gb to a new 250gb but it is not the size

9 more replies
Relevance 60.68%

Is there any software that will allow me to do this using a CD Image ... I just can't boot my computer into Windows to get the files by using installed software. Any suggestions?

Answer:Hard Drive Dead ... Need to move folder over to new hard drive!

Please explain more fully what you want to do. If your hard drive is dead, any folders on it have gone to computer heaven. Perhaps you need a bootable CD-ROM?

5 more replies
Relevance 60.68%

A friend brought me her computer. It is a Sony Vasio Laptop model: PCG-5K1L. It has a Hitachi 250GB 5400RPM SATA HDD that has failed do to physical damage (she dropped it). Is it possible to move all the data, including the Vista Home Premium OS from the old HDD to a new HDD so she doesn't have to buy a new OS?

She's had the computer for awhile and doesn't have any restore or repair disks. I happen to have a Vista repair disk (from an old laptop). Am I able to install the repair disk on the new HDD and then use the product key on the underside of her computer to install Vista?

Thanks for your help. If this topic has been covered successfully in this forum in the past, just link me to it. I tried looking but am not exactly sure how to phrase the search question. I've looked, but not satisfied with what I have been finding.

Thanks
 

Answer:How do I take Vista off my old failing hard drive and move it to a new hard drive?

In spite of the physical damage you can still read the hard drive? Try cloning the drive or imaging the needed partitions. I use Macrium Reflect Free. Easeus Todo Backup is another free one, and there are lots more.

Am I able to install the repair disk on the new HDD and then use the product key on the underside of her computer to install Vista?Click to expand...

Only if the "repair disk" is a Vista installation DVD. Repair disks just include the Recovery Console programs (I probably don't have the correct term there) to fix issues with booting and startup, etc.
 

3 more replies
Relevance 59.04%

I recently bought an old used PC (Dell XPS Gen. 2 ? Pentium 4 3.0 GHz, 2 GB RAM), installed my 1 TB SATA hard drive and a new install of Windows XP SP3. I?ve also got an IDE hard drive in there with lots of media files on it. I?ve been trying to copy or move files from an external USB hard drive to the IDE drive, but nearly every time I try to do so, Windows Explorer (or Q-Dir) will lock up, with the progress bar showing very little progress. I have been able to copy a few small files successfully, but anything else seems to crash it. I?ve checked for DMA/PIO status and have found that it has reverted to PIO several times, and I?ve deleted the primary IDE channel in device manager so that it would reinstall with DMA mode. The problem persists. My device manager shows two primary IDE channels and one secondary IDE channel. I have the 1 SATA hard drive, 1 IDE hard drive, and 1 SATA DVD burner installed.
Any ideas?

Thanks

Answer:Windows XP locks up when I try to copy or move files from external drive to IDE drive

can you write a file to the drive?
any files you can open on the drive? Or do you get access denied when you try to open a file?

4 more replies
Relevance 59.04%

Good afternoon All,Yes I did fill the partition......and I knew from the forum what was happening..I did redirect to the D drive for the future.I was having a multide of problems with vista Sp1 and Tmproxey, trend micro crap and others etc........ I now want to use the one key recovery because of my recent issues. I saw the COA2 program but it looks like it won't work with vista  Is there a way to move Programs easily to the D Drive???I do not have CDs for some of the programs so i don't think i can uninstall and reinstall to the other drive...Any ideas ?Thanks in advanceTBIMessage Edited by TheBigIndian on 07-28-2008 12:14 PM

More replies
Relevance 58.63%

i removed a hard disk from my old pc,as the processor had blown,and i have windows xp pro installed,the user account i used was passworded,so when i try to access my files on the slave h/d is doesnt allow me to open the folder or access these files.....i need help......as i must get to these files,i tried using the hard drive as my master it dosent allow me to use it as the master h/d is anyway to remove this protection as i need these files!

any help appreciated

thanks
 

Answer:Can't Move Files From Slave Hard Disk

Well, you have this option, on the system you are using right now, after shut down, disconnect the hard drive (from the working system, just unplug power and data cables) change your old hard drive jumpers to Master and connect the cables you disconnected to your old drive (you can just sit the drive on something instead of installing it in the bay) and follow:

How to: Repair Windows XP/2000 if you are unable to boot into Windows .

After you do the recovery, back up your data, disconnect the old hard drive; re connect the other drive back up.
 

2 more replies
Relevance 58.63%

My computer is telling my that i have very low disk space, because my "C:" drive is entirely full, but my "D:" drive is empty. My computer is acting strangely (like freezing and making everything turn huge and differently-colored) due to this memory space problem. How can I move some of the files that are filling my full drive into the empty one? Pleeaasse help, this has been a problem for a while and I can't take it anymore. Thanks a lot.

Answer:How can I move files between hard disk drives?

I recommend that you move your My Documents folder and your Desktop to your D: drive, as well as any other files (pictures, videos etc) that you might consider irreplaceable.

You can use Tweak UI:

http://www.microsoft.com/windowsxp/d...powertoys.mspx

Download > Install > Open it > expand My Computer > click on Special Folders > select Desktop > click on Change Location and select a place on your D: drive.

8 more replies
Relevance 58.63%

How can I move files from hard disk C to disk D?

Answer:how move files between hard disk drives

and welcome to the Forum

Open each drive with Windows Explorer . . highlight the files you want ot move, right click on one and hold . . drag to the target drive and release . . choose Move.

8 more replies
Relevance 58.63%

hi im costac19, new to major geeks im trying to swap my 80gb sata hard drive for a 320gb samsung ide hard drive how do i do it? are the cables the same and how do i swap the data from one drive to the other. thank you to any one that can help a new member and a novice upgrader.
 

Answer:i wont to swap my 80gb sata hard drive for a samsung 320gb ide hard drive. i a

Hi

No the cables are not the same, SATA and IDE are very different.

So ground info is needed though....

What motherboard do you have, make and model?
If you dont know this info then Everest Free will help just tell us what is listed under Computer > Summary > Motherboard

or tell us if this PC is a OEM build as in HP, Sony, Dell etc again model and version number is needed.

These days most or majority of motherboards that employ SATA only have 1 at most IDE connections, so if your using 2 CD/DVD drives the connector capacity will be full.


If you do have a spare IDE connection, then my advice to you is to keep the SATA drive as the primary C: drive ( as they are faster in data transfer than IDE ) and use the ID drive as storage, so once the IDE drive is installed copy all your normal data/music/video/image etx files to the larger drive and just use the SATA for the OS and applications.
 

7 more replies
Relevance 58.22%

Is it possible to move the hard drive from the Z400 and move it to the DVD drive bay? I would like to replace the hard drive with an SSD. If so, which drive bay adapter has the best fit? If it is hard to remove the hard drive, can i install the SSD in the drive bay and boot from there and use the hard drive as a data disc? Any step by step instructions on removing hard drive? 

Answer:Move Hard Drive or install SSD to the DVD drive bay on Z400??

Anyone?

4 more replies
Relevance 58.22%

I have a 160gb hard drive on my laptop which i want to upgrade to a 750gb. I have no windows disc and no restore disc. is there any way to clone the entire contents of the 160gb (including windows vista) to the new drive.....

Answer:upgrading hard drive, how do i move windows to new drive

Almost every company offers the user some way to create disks. Make the disks now for protection or consider ordering them if you need to.Generally companies that sell laptop hard drives also offer some way to clone the old one over. You may have received a usb to sata adapter or you may need to get one. You also may need to download the software from the hard drive makers site if it didn't come in box. A Pit Bull is like a gun you can pet. And there is no safety on it.

4 more replies
Relevance 58.22%

How do I reverse this problem? I moved my downloads, documents, desktop and music before realizing that these files were merging instead of doing what I intended.By which I mean the desktop, documents, downloads and music files have now all been named D:\ and the contents of each file are now the same. Meaning my desktop for instance is cluttered with everything from my downloads file. I cannot delete them from my desktop as it says they will be permanently deleted nor can I move them into the original download file because it to consists of the same files! Is there a way I can restore them to the original state? I can't move them back using the same process which is frustrating.
I was following instructions as I wanted to move my basic files from my SSD to my Hard Drive. The process of which was searching "C:\Users\MyName" > Right click on a folder (i.e Downloads) > Click "Properties" > Click "Location" Tab > Click "Move" > Select your secondary hard-drive and so on for each document. But in doing so they have now become merged (all displaying the same files) How do I fix this?
Your help would be much appreciated. Thanks!

Answer:Tried to move basic files from (C) drive to (D) drive and now they have merged!

First thing to do is to make a back up of all your user folders contents on to an external drive preferably. Then if anything (will?) goes belly up you will still have your data. Have a read here , especially option two.
You should then be able to delete the folders on the D drive and start again.
My setup I don't use a redirect switch. I simply create folders on the D drive. Download2 for instance and use my browser to change the destination of downloads to Download2 on the D drive. If I've downloaded a music file I can then check the file is ok and copy and paste to my music2 folder on the D drive. Photos, etc. you can save the same way.
If I've downloaded a program installation file, say, Ccleaner for instance, I'll create a ccleaner folder (D) and install to it. The shortcut on your desktop still works. It's all manual but easily done and takes no time.
That leaves Windows in a default state with no redirecting switches so if I need to reinstall or upgrade Windows both drives are independent.
That's my theory and it works for me.
Good luck.

2 more replies
Relevance 58.22%

HiI would like to move all files from drive D to drive C on a B50-70. Can I safely do that?Do I need to close all programs running to do that transfer?  There are only 2 folders in drive D:Drivers and Applications D drive size is 26GBC is the larger drive D drive is named Lenovo; seems it was shipped this way.    

More replies
Relevance 57.81%

When ever I try and move anything to my hard drive, I keep getting this message,




Can anyone please help me out. I'm using a WD My Book Essentials
 

Answer:Can't move anything to my hard drive!

A little more info might be helpful: operating system/service pack #, USB compatibility between your computer and the external drive, file attributes for the ext. drive (is the My Book 'read-only'?), etc...

Did the file transfer process work before and quit, or is this the first time you've tried to transfer?
 

7 more replies
Relevance 57.81%

All,
I am new to this site and I am not sure if my question needs to be in the hardware or software post.
I recently had my primary hard drive quite in my xp pc. It would not boot. It was running fine, and then I turned it off for a thunder storm. The pc did not want to boot again. I was getting a boot.ini error. After trying to get it to boot with no luck I decided to buy a new pc. I bought an e machine. I have a friend that has had good luck with his.
I took the slave hard drive (160g seagate) out of my old pc and put in an external case that is usb to the new pc. The new pc is a T6524 with xp media center edition. The pc sees the hard drive but it will not let me access it. The pc asks if I want to format it. Then I slaved it like in the old pc on the same IDE cable as the primary and have not changed the jumper setting.
When I look in the computer manager it shows the hard drive but it is not the correct capacity and it has no file system.
Is this a compatiblity problem or a xp problem? I would like to get the data off of this drive. Does anyone have any suggestions?

Thanks
 

Answer:Help! Hard drive move

does it show as D drive E drive if so try right click and click on explore
also while right clicked go to security and take ownership/possession of drive.you do not need format to change file system to or from ntfs or fat32
while usb the usb software may have changed it to ext2
 

10 more replies
Relevance 57.81%

Hi all i am running a dual boot setup i have XP on one HD and 7 on the other, it seems that the MBR is installed on the HD which has XP installed on it as i found out when i unplugged it 7 would not boot up!! I am looking to remove the HD with XP as I dont use it, can i move the MBR to the HD with 7 on?

hope you can help

Craney

Answer:Can I move MBR to different hard drive?

Yes, first mark Win7 active in XP Disk Management, or using free Partition Wizard bootable CD.

Next unplug XP HD, boot into Win7 DVD Repair console or Repair CD, click through to Recovery Tools list to run Startup Repair up to 3 separate times with reboots to write the MBR to Win7.

4 more replies
Relevance 57.81%

Hello All,

I would appreciate for any help on the following:
I have two computers one with PATA drive and the other with SATA.
And I would like to add the older one to my new one and also take advantage of using some software which were installed on PATA drive.
I know my new computer can take one more hard drive.

Would that be possible and what I need to do?

Thanks again!
 

Answer:Move a hard drive from one PC to another

8 more replies
Relevance 57.81%
Question: Move hard drive

I want to move my old is win 8.1 to a newer computer. I want to move the whole hard drive with the OS and the software included. The problem that I find is that when I start the computer it shows me the BIOS and after that a black screen with a cursor. I cannot access to the safe mode in order to check what happens. And I've tried F8, an external recovery drive and a software to tell the OS that it should start in safe mode. It always show me black screen with cursor.The newer computer is good enough to to run win 8.1. Any clue??

Answer:Move hard drive

Your Windows 8.1 license is tied to the PC it was delivered in.  That was part of the license agreement.  You will need to purchase a license key and perform a clean install to the hard disk on the new PC. What is the brand and model of newer computer?

1 more replies
Relevance 57.81%

I need to move EVERYTHING on this hard drive to a new one. Operating System, programs, everything. I need to do this real soon because my hard drive is almost dead. I keep getting all sorts of CHKDSK errors at start-up and files icons being changed and file names being changed to funky looking symbols and characters. This hard drive is from 2001 so it should have been about dead by now. I've done research already and these are the symptoms. I have rid my computer of malware, adware, viruses etc. etc. so now I only have one option left (if its even an option at all.) Can this be done?
 

Answer:Need to move EVERYTHING to a new hard drive!!!

16 more replies
Relevance 57.81%

i was using a 20 gig hard drive as my sole hard drive. when it got full, i purchased an 80 gig hard drive and set it up as a new volume. initially i had planned to move everything to the new HD and use the 20 gig one as a scratch disk for photoshop. a friend told me that he had also had two hard drives but uses the small one only to store/run the operating system. thus speeding up the OS and giving photoshop more space to use. (we both spend the majority of our computer time in photoshop, so it's a priority)
i figured at first that i should just copy and paste all my files and settings to new HD "E:" and reinstall OS on original "c" drive. but i don't really know how i would redirect OS to look for everything on the other drive. (settings, music files etc.) actually the first thing i tried was the XP "files and settings transfer wizard," designating the new drive as middleman/removable storage device. it prepared everything to transfer but when it finished that step it did not go on to the actual transfer. as you have certainly surmised, i don't know what i'm doing. so here i am. any advice would be appreciated.
 

Answer:How do i move everything but xp to a new hard drive?

you would still have to reinstall all programs on the new drive. you could 'slave' the old drive to the new, the copy/paste files over.

or 'clone the original drive.

free clone is clonemaxx. google for it.

i've used it, and its easy and great!!

the new drive will be an exact copy of the old.
 

3 more replies
Relevance 57.81%

after a discussion on defraggler and how it runs so slowly scanning all my image files, someone suggested i move some files onto another drive and see if that takes care of the problem..where do i temporarily move said files and move them back? -pertaining to local disk C and D

Answer:How to move files to another drive?

You have a few options.
1. Use an external hard drive
2. Create a partition on your hard drive
3. Burn them to a DVD

9 more replies
Relevance 57.81%

I have a pc, and I'm running Windows 98. My "C" drive was full so I just recently installed an extra drive in my computer. Now I'd like to move some or all of the files from my "C" drive to my new "D" drive and free up the space in the "C" drive. How do I do this?
 

Answer:How do I move files from one drive to another?

16 more replies
Relevance 57.81%

I recently upgraded my daughter laptop from Win8.1 to Win.10 and realized that comp. has 2 partitions(C & D). Everything is for some reason on C drive(OS,programs,photos,videos,music) and it's almost full while D drive(data) is completely empty. Both drives are 256 GB big. Is there a way to move personal files to D and leave C just for OS and programs? After that I will change destination path.
 

More replies
Relevance 57.4%

Hello,

can someone help me - I have recently re-installed XP onto a 250GB hdd but it is only seeing 127gb drive. I have service pk1 and service pk2 installed and the bios on the system is seeing the 250gb drive.

Can someone help me

Thanks in advance

Elaine
 

Answer:Re-installed XP wont see 250gb hdd

6 more replies
Relevance 57.4%

Hi,  I just got my p50 in the mail and am all set to go. I'd like to just pop out my ssd from my w530 and put it into my p50 without reinstalling windows. Anyone else done this? Success or Failure?  Thanks,Paul 

Answer:Move hard drive from w530 to new p50?

Depends on your objective. If you are using this drive for data, and booting from the OEM drive (presumably an M.2), there should be no problem, except that your apps will need to be reinstalled. If your plan is to boot directly from the older drive, I'd be very surprised if you can make this work at all, or without a ton of unnecessary and potentially problematic work.  You will encounter at least two to three classes of issues (if running on an MS-Platform.  Linux, I can't really speak to but I'm sure some variation on these themes might apply): 1) Windows (whatever modern version) will recognize that the OS is not running on the machine upon which it was generated--at minimum, it will give you that "counterfeit OS" series of messages and associated problems. 2) The device drivers will likely also not work correctly -- especially if you are on an SSD.  Microns do not behave exactly the same as Intel or Samsung devices; I have encountered bizarre interactions with Intel storage drivers even on clean installs. 3)  While not likely, you might possibly trash all the registry settings and "hidden" locations which contain critical (and often obscure) data necessary for running your apps. So, be careful, make several full and image backups and have fun, if you really want to experiment.  Don't say you weren't warned, though! 





______________________________________________P70, Xeon 1505 C... Read more

3 more replies