Computer Support Forum

PSU, switch, or worse

Question: PSU, switch, or worse

Got a PC here that the lights on the MOBO come on, when you hit the power button, it clicks like it should, the green light comes on, but when you release the button, it goes back off. Initially I thought this was a PSU problem, but now I'm thinking maybe the power switch itself.

Relevance 100%
Preferred Solution: PSU, switch, or worse

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: PSU, switch, or worse

Check the front panel header, to make sure the power switch wire is connected properly.

2 more replies
Relevance 47.97%

Hi all,

I started the day on a high note, before turning on the computer that is, thinking I was going to get some things done. This was not to be: So we start at:

FAIR:
After XP loaded it said that it had recovered from a serious error Product ID _251... so I did some digging around and got some info from microsoft's web pages complete with registry fixes (deleting bad entries, etc.)

I did a quick scan with malwarebytes and it found some stuff that I deleted and when I did a restart it didn't come up correctly.

Went into safe mode and it came up.
(made a HUGE mistake here. Did not copy files I wanted to save when I had the opportunity)
Closed out of safe mode and let it start normally.
Would not boot normally.
Tried to boot in to safe mode and now its recycling back to POST, we have gone to...
BAD:
Hmmm. So I thought how about putting the XP disk in and then do an install leaving file system intact.
When I got to the point of doing the install I chickened out because it said that it might delete the My Documents folder (had some things in there I didn't want to lose) I've done this procedure before and perhaps I should have taken the second opportunity to recover gracefully but I did not.

I hit F3 to cancel out of the install to try and boot from my other HD that has XP (but with some driver issues that I had yet fixed.)

I went into the CMOS to change boot order and notice that the hard drive (the one that I was trying to boot into is not showing ... Read more

Answer:HD/Filesystem prob:Went from fair to bad; then to worse, much worse

Test the HDD with the drive manufacturers disk tools (preferably using a different PC). Run the short and long tests. If either test fails or has errors, the drive is faulty.

4 more replies
Relevance 47.97%

My icons are disappearing
The computer is running slow
Viruses have completely taken over my computer
I am going through financial difficulties right now and would REALLY appreciate help.
I understand computers therefore I can take direction fairly well..
Just please tell me what I need to do.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:19:43 AM, on 5/8/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16544)
Boot mode: Normal

Running processes:
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\WINDOWS\system32\CTsvcCDA.EXE
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Intel\Intel Application Accelerator\iaantmon.exe
C:\PROGRA~1\TRENDM~1\INTERN~1\PcCtlCom.exe
C:\Program Files\Spyware Doctor\pctsAuxs.exe
C:\Program Files\Spyware Doctor\pctsSvc.exe
C:\Program Files\Dell Support Center\bin\sprtsvc.exe
C:\WINDOWS\system32\svchost.exe
C:\PROGRA~1\TRENDM~1\INTERN~1\Tmntsrv.exe
C:\PROGRA~1\TRENDM~1\INTERN~1\tmproxy.exe
C:\WINDOWS\system32\svcd\svchost.exe
C:\Program Files\Canon\CAL\CALMAIN.exe
C:\WINDOWS\system32\dllhost.exe
C:\WINDO... Read more

Answer:It's Getting Worse & Worse. PLEASE. I cannot afford to bring it anywhere:( LOG INSIDE

7 more replies
Relevance 46.33%

Hi everyone,
My bottom fan on my PC was being very loud, so I opened up my case and unplugged the power supply, and flicked off the power switch on the back. I unscrewed the bottom fan and dusted it a little bit, and then I put it back together how it was before.

The part that I unscrewed also contained my hard drive, and now that it is reseated I cannot boot.


At first I got an error when booting:
Loading operating system . . .
disk boot failure, insert system disk and press enter.

THEN, I tried making sure everything was connected well and tight, and now I am not getting anything displayed on my screen.

Apologies for the lack of knowledge and thanks for the help.

Jeremy
 

Answer:Boot problem, getting worse and worse

It is possible that when you removed the fan and hard drive, you plugged the hard drives SATA cable into a different SATA port on the motherboard. Get into the bios, and make sure that the hard drive is being detected properly
 

1 more replies
Relevance 46.33%

I bought a Think Pad in April last year which does not start anymore, no lights,nothing.I wanted to send it back to Lenovo for guarantee.Ther ist only ONE problem, there is no sticker on the laptop which shows me the serial numer. Obviously there supposed to be on, but it is missing!!!I do have the invoice which shows the purchase date, but no serial either.I already quit wasted some time to with this bull**bleep**, I hopefully do not need a layer for that.Here you see the last response of the "support" manager -Dear Michael Mueller,Unfortunately I have to inform you that you have no guarantee for this machine.Repair of machines that do not have a sticker can only be carried out by a Lenovo service partner.Lenovo Service Partner:https://pcsupport.lenovo.com/de/de/serviceproviderIf you have any further questions about this service case, please send us an e-mail to [email protected] or call us on the free phone number DE 0800 - 500 4618 / AT 0810-100-654 / CH 0800-55-54-54. Lenovo regularly conducts customer surveys on service quality.If you are selected, please take a few minutes to answer the questions.We thank you in advance.  Yours sincerely, Davor KrpanLenovo Technical Support IBM Hrvatska d.o.o. za proizvodnju i trgovinuMiramarska 23, 10 000 Zagreb, HrvatskaUpisan kod Trgova?kog suda u Zagrebu pod br. 080011422Temeljni kapital: 788,000.00 kuna - upla?en u cijelostiDirektor: ?eljka Ti?i??iro ra?un kod: RAIFFEISENBANK AUSTRIA d.d. Zagreb,... Read more

Answer:guarantee handling - bad worse than worse

I just forgot to mentioned, that the purchase was done through the Leonovo online shop itself -  VERSANDBESTÄTIGUNG Ihre Bestellung wurde versendetSehr geehrte(r) Michael Müller,vielen Dank für Ihre Bestellung im Lenovo Online-Shop, der von Digital River unterstützt wird.Die folgenden Produkte wurden versendet.Bestelldatum14. April 2017Bestellnummer23856585462Tracking-nummer1ZAF68846704024055Folgende Artikel wurden versendet: BestellmengeProdukt-SKUProduktnameVersandmengeVersandmenge gesamtBetrag120J1CTO1WWThinkPad 13 2G11800,52EURWenn Sie per Kreditkarte bezahlt haben, wurde Ihre Karte nun belastet.

1 more replies
Relevance 46.33%

i've had verizondsl for about half a year or so now, and from last month to present, the connection has been horrible.. sometimes it would just hang for up to a minute at a time, with the modem activity light blinking slowly (loss of connectivity).. before it started, speeds were decent, and although slow compared to the optimum cable i was used to, it was sufficient. now it's just pure garbage. if it weren't for the fact that we're getting free cable, i would immediately switch to roadrunner

i figure asking you guys is probly much more helpful than those scripted outsourced fools at tech support. i tried all that "reset your modem" "unplug the ethernet cord" "make sure you're computer is on" crap already and would like some REAL answers..

PS- at my old house, we used to have verizon as well, and after a while it just stopped all of a sudden and when we called to see what happened, they said since there was construction in the area, they must have switched our phone line over to one with a further CO, and we were now too far to service. verizon is teh gay.
 

Answer:verizondsl getting worse and worse speeds

Well try plugging the modem into the demark jack if you have one (by where the phone line comes into your house). See if this still happensl. If it doesn't maybe something happened to your internal phone lines. (this probalby won't be the issue I'm betting).

Beyond doing that phone your ISP and get them to file a support ticket or whatever they call it there. When I was having trouble with my DSL connection a couple years ago I phoned up, they sent a guy from the telephone company to test the line and they replaced a device at the CO and the connection has been perfect ever since.




The [H]orde needs You!
 

15 more replies
Relevance 46.33%

Initially it was Edge not working properly, now it mostly crashes. Even the new "amazing" feature of tab previews doesn't work properly. Imagine, I moved back to Chrome after so many years of being a happy IE user. Cortana was a bit iffy with "Hey Cortana". Now she doesn't listen to what I say at all, even when I press the button. The notification center has its own mood. Often decides to hide until I restart for absolutely no reason at all. Same goes for the sound volume and other flyouts on the desktop.
In short, there is massive degradation of various major features with every new build. And since I post all the issues I find using the feedback app, I know it is not just me experiencing these things. This is disastrous.
So, is it just me or you experience similar issues yourself?

Answer:Is it just me or does Windows 10 get worse and worse with every new build?

It's just you.

10 more replies
Relevance 46.33%

I was curious if anyone out there knows anything about this...

I have a self-built computer, three years old now...and day by day it's getting worse and worse!

AMD Athalon XP @ 1.1 GHz
512MB PC2700 DDR-SDRAM
Windows XP Pro.
Radeon 9500 Pro. 128MB DDR

The problems started about six months ago--every time I'd turn on the computer, it'd scan the hard drive for errors, claiming an improper shutdown. Then, two months ago, it started going to a black screen saying a windows file is corrupt, use the XP CD to restore the file--but simply restarting the computer at that point would get it going (only came up on a fresh start).

Then in the recent times, the screen is completely black. I turn on the computer, and no signal is sent (I'm guessing) to the monitor, so it's just flashing the power light...but after waiting approximently 10seconds, and restarting ('reset button'), it would go to the other problems--file corrupt screen, then the error scan...and this latest time, it took 4 resets for the screen to catch a signal...

All wires are plugged in good, and everything seems to be functioning properly, except for, of course, this problem I have...and I really have no idea where to start on fixing this. I planned on keeping this computer for another year or so--and hope this can be fixed! Anyways, any ideas/suggestions, please let me know!

Thanks,
-X

Answer:My Computer - Getting Worse & Worse! Is there hope?

take the graphics card out and insert it back in firmly making sure it is sat properly in its slot. check the manufacturers websites for your motherboard and graphics card and see what the bios updates do, and see if they have any FAQ's to check if anyone else has been having similiar problems to you in terms of people who have the same motherboard or graphics card??

Email the manufacturer(s) for your motherboard company and graphics company.

2 more replies
Relevance 42.64%

Hello my new bestest friends. I need help ! (as does everyone who comes here) My computer has been running like a bag of you know what for about 3 weeks. IE became corrupt and will not start even after uninstalling and re installing Versions 6 & 7. However this is not the problem as I am currently using safari and finding it great. The problem lies with my computer and it's sluggishness, ever since IE became corrupt my computer seems to have slowed. I am getting occasional Internal memory (blue dos screen) errors and several other little glitches like windows XP's search program will not close after I perform a file search. I have performed several Virus & spyware checks such as AVG and Spyware Doctor also several registry progs like registry Booster.AVG comes up clean, however Spyware Doctor and Registry Booster both show a lot of Registry errors inluding heaps of lnk file and url files. I removed most of these the first time around but discovered it to have deleted all my shortcuts and bookmarks that I much needed (well not so much the shortcuts) It did not remove the actual .exe files but was a major hassle as my dektop shortcuts where wiped. So I performed a system restore and now have everything back.I am wondering are/have these files become corrupt or is this just overkill on the software (spyware Doc & reg booster) behalf?? I have also noticed in my Hijack this log that there are several (missing files).I am so in need of help as i use my computer to p... Read more

Answer:Need Help Computer Getting Worse And Worse!

Hello Krisso,

Welcome to Bleeping Computer

Sorry about the delay. If you still need help, please post a new HijackThis log to make sure nothing has changed, and I'll be happy to look at it for you.

Thanks,
tea

2 more replies
Relevance 36.9%

when i switch on bluetooth-wifi switch my screen immediately goes off after few flickerings in my ideapad y460.When i turn-off the swith immediately am getting the screen. I saw an error message(in red color below) been logged in EventLogger. The ReadyComm.DirectRouter service failed to start due to the following error:The system cannot find the file specified. In windows services panel the ReadyComm.DirectRouter  service pointing to C:\windows\System32\IgrsSvcs.exe -k IgrsSvcs. the IgrsSvcs.exe is not the location instead it is available in C:\Windows\SysWOW64\IgrsSvcs.exe. because of this problem, iam not able to connect my mobile through bluetooth. am not sure whether it is hardware or any  driver problem   

Answer:when switch on bluetooth-wifi switch my screen immediately goes off after few flickering in my y460

remove readycomm application, it's useless.

3 more replies
Relevance 36.9%

Need to no if I have this right

they have a dsl modem going to a Linksys router to a 24 port switch then to a little 4 port switch. sure, so then Would it be modem to router then router to any port on the big switch or is there an uplink port on the big switch it should go to? then you would hook a cat5e from one of the regular ports on the 24 port switch and run it to the uplink port on the 4 port switch need to no if the whole sequence is right. Hope someone can help, john will told me the cable would go from the big switch to the uplink on the small switch but I am wondering if I have it all right or not and wonderiing about from the router to the 24 port switch does the cable just go in a regular port in the big switch or if there is an uplink port does it go there. Hope you can understand my rambleing here. Thanks (please don't send me to a link) just need to no modem to router to regular port or uplink port on 24 port switch then from regular port on 24 port switch to uplink port on the 4 port switch. Thanks
 

Answer:Solved: Windows xp hookup question for modem, router, switch, to switch?

Router to uplink port on 24 port switch, and then normal port on the 24 port switch to uplink port on the second 4 port switch. An auto-MDX port on a device negates the need to worry about uplink ports for that particular cable connection.
 

3 more replies
Relevance 36.9%

I have Windows 7 Professional on my PC. In the first load I had, the PC should automatically detect if the LAN cable was plugged in, turn off the wireless radio, and change the network icon in the right bottom corner to reflect the cable was now in use.
Unfortunately, I had to reload my PC, and since then I can't get it to do it again.
So, what I'd like to achieve is this: Have Windows automatically detect when the cable is plugged in, turn of the wireless radio, and change the network icon in the right bottom corner to reflect the cable is in use - and, obviously, vice versa.
Can someone tell me what I need to do, please?

Answer:Have Windows 7 automatically switch to LAN when cable is plugged in and switch to wireless when it's removed

Hi,
There are two methods can help you.
1. Go to <Network and Sharing><Change Adapter Settings> and right click your wired and wireless adapters one at a time to change the properties. Select IPv4, click <Properties>
then click <Advanced>. For each one, clear the "Automatic metric" check box and assign the metric value manually. Setting your wired adapter?s metric value lower than wireless adapter one, such as ?1? for wired adapter and ?2? for wired adapter.

2. Go to <Network and Sharing><Change Adapter Settings>,
hold down 'alt' to bring up the "File" menu, select "Advanced", select
"Advanced Settings" from the dropdown menu, adjust the priority of your wired adapter higher than your wireless adapter in the "Advanced Settings" window under the "Adapters and Bindings" tab.
Hope this helps.Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

3 more replies
Relevance 36.9%

Am a new Networking BEE I had built a small network of 20 systems at my office and there I had connected a switch and router.

All the switch ports have been covered by all the systems and one port is given to the router
switch(20)----router(LAN)
|
|
|
HUB(8ports)

And also I connected a HUB to the switch ..

It works fine for my internet connections to all the systems but how do i make authentication of passwords and username to my network systems from one server which I use server 2003 at one system

let me know the detailed step by step procedure to build.........

I would feel very happy If at all any Suggestions for me to make my Business grow.....

As early as possible ................

Thanks in Advance

Smiles....[][]
 

Answer:Connection of Router to Switch and also a Hub to Switch - N/W systems internet share

>>I use server 2003 at one system

you need to enable Network Login, but that requires that win2003 have

a domain controller
a DHCP service
and a DNS service.
the Domain Controller is just another name for LDAP and it becomes the control point
for all systems.

get some books on Configuring Win2003 Server
 

4 more replies
Relevance 36.9%

I just got an alienware 13 r3 laptop w/ win 10 pro pre-installed. The hard drive is one 500gb ssd drive. I wanted to partition the drive so that my OS was on a 140gb partition, and then the remaining volume for a media drive.

I wasn't able to shrink the original install volume down enough so I had to do a clean install. I used the media creation tool to create a bootable usb drive. The usb drive was bootable and setup would load but at the media selection page there were no drives visible.

After some research and whatnot I was able to determine that disabling Secure Boot and switching the sata mode to AHCI from RAID did the trick. I was able to re-partition and install win 10 pro.

I have turned Secure Boot back on and I got a warning when I made the change do but the system still boots fine. I haven't changed the sata mode back to RAID because I get a similar warning message and I'm not sure if it will have any effect.

Do I need to? Does it matter? Will it cause a problem? It's a laptop with one drive, does raid even matter in that situation?
This is for UEFI boot systems not legacy BIOS but it may still apply. I don't know.

Thanks for your help.

Answer:Had to Switch to AHCI to Do Clean Install/Re-partition, Switch Back?

I don't see any reason to use RAID if it has only one drive. Maybe I am missing something, though. I would leave it on AHCI.

The way you would change it, though, would be to boot into Windows in safe mode. Delete the device manager entry from the AHCI drive controller. Reboot the computer into UEFI settings and change the mode to RAID. Reboot the computer back into Windows safe mode. Turn off safe mode, reboot the computer back into normal Windows and hope for the best.

8 more replies
Relevance 36.9%

I am not sure what happened here but I have been using Local User to sign in for a couple of years since I installed Windows 10 but suddenly after a reboot, I am now forced to use MS account login. Note, for my initial install, I did use a MS account but then I did not like it and was able to change it to Local user and was using that ever since.

I have searched for solutions but can not find anything that works. Trying to change it directly via the settings/account results in:
Error code (0x80004005) and message: "We're sorry, but something went wrong. Your Microsoft Account wasn't changed to a local account."

I have also tried adding another 'family member' account and get this error:
"We couldn't connect to Microsoft family right now, so your family on this device might not be up to date."
Clicking on add a family member at this point anyway, opens a box that says 'Something went wrong'.

Any solutions that I did try from other sources have not helped.

Does anyone have any idea if this suddenly came with a Windows update, or something I did to myself? Any armstrong ways to fix this and get back to a Local User for sign on to Windows?

Thanks,
Larry

Answer:Sudden switch from Local User to MS account - can not switch back

lrw said:

I am not sure what happened here but I have been using Local User to sign in for a couple of years since I installed Windows 10 but suddenly after a reboot, I am now forced to use MS account login. Note, for my initial install, I did use a MS account but then I did not like it and was able to change it to Local user and was using that ever since.

I have searched for solutions but can not find anything that works. Trying to change it directly via the settings/account results in:
Error code (0x80004005) and message: "We're sorry, but something went wrong. Your Microsoft Account wasn't changed to a local account."

I have also tried adding another 'family member' account and get this error:
"We couldn't connect to Microsoft family right now, so your family on this device might not be up to date."
Clicking on add a family member at this point anyway, opens a box that says 'Something went wrong'.

Any solutions that I did try from other sources have not helped.

Does anyone have any idea if this suddenly came with a Windows update, or something I did to myself? Any armstrong ways to fix this and get back to a Local User for sign on to Windows?

Thanks,
Larry



Hi Larry and welcome to Tenforums.
MS servers were having problems today; probably why you got those errors.
Please try now - everything seems to be back in working order.
Switch to Local Account in Windows 10
.

46 more replies
Relevance 36.9%

Hi, I have a Lenovo t420s with dualboot win7 and Ubuntu. I never had any problems until now and could switch on/off my wireless and bluetooth connections via the Hardware Switch (right bottom left of the notebook) or via FN + F5. However, without any specific reason the wireless and bluetooth was switched off and the the system tells me that I have to switch on WIFI via the Wireless Radio Switch. However, although I can move it, it doesn't make any difference for the Switch. I tried to reset the BIOS to Default and changed the network settings, and also rebooted several times. I won't work with any of the two systems. Any advice would be greatly welcomed!!! Any suggestions?  Thanky so much! Best, Ernest













Solved!

Go to Solution.

Answer:t420s wireless radio switch doesn't switch on / broken

Welcome to the forum.
 
It's possible that the switch is broken. IIRC the switch is installed on a small circuit board that connects via a ribbon cable. It's also possible that this cable is not making good contact. I would suggest that you examine the switch and board for these sorts of issues. 
 
You can get detailed instructions for opening up the T420s and locating components in the Hardware and Maintenance Manual.

2 more replies
Relevance 36.9%

I have a wireless router connected to my modem, and ALL PC's connect to that for internet.

I also have a gigabit switch I use to transfer data in between several of the machines. I do it quite often and I don't want it eating up the wifi bandwidth.
I have done it before, but it has been a long time and I cannot remember how I forced internet traffic over the wifi and local traffic through the switch
Is the only way to do it to specifically tell Windows to use the IP address of the LAN connection? I know it will work that way, forcing local traffic directly to that IP, but I seem to remember there being an easier way to do this.

Thanks.
 

More replies
Relevance 36.49%

EDIT: Figured out what the matter was here: http://hardforum.com/showpost.php?p=1040764063&postcount=7

Hello, all!

A few weeks ago, we got in a shipment of a couple of Trendnet switches to replace ones that died over the summer.

I hooked one up, absolutely no problem (this one: http://www.amazon.com/TRENDnet-16-P...F8&qid=1376386527&sr=8-1&keywords=trendnet+16).

However, when I plugged the other one (http://www.amazon.com/TRENDnet-Unma...TF8&qid=1376386720&sr=8-1&keywords=trendnet+8) into the SAME manageable Netgear GS724T V2 that the 16-port Trendnet was working fine with, it wouldn't communicate.

At the time, I didn't think much about it. I just plugged it into the 16-port Trendnet (which it communicates with fine), and went on my way.

However, tonight I have been working on setting up VLANs. All of the devices plugged into the 16-port switch need to be on one VLAN, while the 8-port Trendnet needs to be on another... Since it doesn't communicate with the Netgear (what I am using to manage VLANs), I am unable to do this directly.

Currently how I have it set up, is I took a 5-port Netgear switch we have here, and just used it as the mediator between the two switches.

Does anyone have any idea why this could be? Even for switches that it does communicate with, it takes a good 15-20 seconds before the lights come on. I'm hoping it's something I can fix locally... With the cost of shipping from here to the states, we m... Read more

Answer:Trendnet Switch Not Playing Nice With Netgear Switch

I'd get used Dell, HP. or Cisco gear off eBay before I'd buy new Trendnet, D-link, or even netgear.

Are you passing the traffic to the Trendnet tagged or untagged? If it is tagged, is it passed as a .1q trunk or simply as tagged packets?
 

8 more replies
Relevance 36.49%

I just noticed recently that when I tried to switch from from the Intel Graphics to the Nvidia card, the light didn't come on. Also I don't know if its related, but there is a weird slowness overall with the computer. Everything seems clean and ok. However I thought it be odd the the switch isn't working any longer and I can't access the Nvidia options either because it isn't connected according to the device manager. I can't find any related issue so I decided to post. Any thoughts or recommendations? Thank you for your help.

Answer:Y570 Not able to switch from Intel to nvidia. Switch not working.

I would get it to service if you still have warranty and don't want to possibly void it. Does the silver switch button jump back to its place when you press it? Or does it feel like it hasn't got a spring to push it back?

9 more replies
Relevance 36.49%

Hi everyone, I searched through the forums but couldn't really find what I was looking for.

Currently we have a DHCP server set up to a switch, that has a special line connecting to a switch in our shop which is just across our back lot, giving network access to the few computers over there. They recently put in a new machine that needs network access, but they have already accidentally cut two ethernet cords. I'm looking to provide a wireless solution for the machine, but I don't want to have to spend a few thousand dollars on a large wireless switch.

Can I plug a wireless router into the switch in our shop, and essentially turn it into a wireless bridge, or is there another, simpler way to do this?

If this has already been answered, sorry for missing it!

Thanks!
 

Answer:Solved: DHCP Server -> Switch -> Switch -> Wireless

While you could use a router, or even configure the router to act as an access point, why not just buy a true access point? They start at $27: http://www.newegg.com/Store/SubCate...ame=Wireless-AP-Bridges-Repeaters&Order=PRICE
 

2 more replies
Relevance 36.49%

Hi,
I am looking to source the switching cable for above. Basically it is a rotating on/off /volume switch on one end of a cable and a 9 pin din type thing on the other that plugs into the bass speaker. The on off part doesn't work and the green on light does not illuminate. I would be willing to pay for such a cable but Maplans etc. haven't got one and Creative no longer manufacture or produce the Creative Inspire T3000 parts and replacement as it has reached its End of Service Life (EOSL)
I'm based in Ireland. any help welcome

Answer:On of switch Creative Inspire T3000 rotating switch /9 pin din?

You could do worse than keep an eye on eBay. There's nothing listed for the T3000 at present, but it could be that other speakers in the Inspire range use the same controller.

2 more replies
Relevance 36.49%

We have 3 16 port switches connected to our router. Everything has been in place and working well since last May.
Beginning this week, as soon as one employee arrives and turns on his pc, every pc on that switch loses internet access. Not network access - can still see other pc's - just no internet.

The pc causing the problems is the oldest on our network, but it is running Win10 like the others. When I check the stats on the router for his IP address, his has the highest transmission numbers.

We are scheduled to replace that pc within the next 2 weeks, but is there something I can/should look at doing in the mean time?
 

More replies
Relevance 36.49%

hi all,

system gets hang, pc configuration is intel 865bgf motherboard with PIV 3ghz ht processor with 80 gb samsung hdd and 266 mb ddr i reinstalled the operating system (xp pro) changed smps and changed 256 ddr but the problem still continues, when the system gets hang i am not able to use my keyboard or mouse i have to restart the system , please help me and also i have to know weather is this the hardware issue or the software issue, and also i am facing same problem with same configuration with the other customer pc .
warm regards,
pradeep
 

Answer:system gets hang (it freezes) only option is to switch off and switch on

12 more replies
Relevance 36.49%

Hi Everyone

I have a Toshiba Satellite P200 and there is a problem with the Display , it works and it does not work .

I have done some checks ,the backlight is on , and it works ok with a second monitor .

The question I really want to ask is , where is the switch or contact on the Lid or body of the Laptop that shuts down the screen when I close the Lid?

I have the Laptop stripped down and I can not see anywhere , where there is some sort of contact mechanical or magnetic between the Lid and Palm rest .

I thought that there me have been something where the Lid Latches close but can not see anything around there .

I know there must be something that puts the laptop into Hibernate when I close the Lid , but where is the sensor or whatever located .

cheers

spike

Answer:Satellite P200- where is the switch that makes display to switch off?

I think the sensor is part of the motherboard but cannot say exactly where it could be located.
But as far as I know the JP9 connector (40pin) is used to connect the display.

However, in my personal opinion its not a sensor issue?
If something is wrong with display, you might need to replace either, LCD panel, FL inverter or should check the connection from display to motherboard

1 more replies
Relevance 36.49%

I am trying to accomplish this:




That is, I have an existing network connecting an office to a colo to the internet. I have a range of public IP addresses assigned to the public interface of a firewall.

I am trying to set up a "public" wireless access network in our office that is completely seperate from our corporate network that we can use for consultants, iPhones, etc that cannot in any way access resources on our corporate network without using VPN.

I envision adding a second loop to our existing network that lives on a seperate VLAN on our switch at the colo that would not have access to our existing VLAN network. I would somehow pass that VLAN traffic across the gigE link to a seperate VLAN on our office switch that would connect to the WAPs of the public network.

Any idea how do do this?


I cannot figure out how to send separate VLAN traffic over the L2 point-to-point link.
 

Answer:Extend a VLAN from one switch over a layer-2 link to another switch?

agrikk said:





Any idea how do do this?
I cannot figure out how to send separate VLAN traffic over the L2 point-to-point link.Click to expand...

My first guess might have to be talking to the people providing you the l2l link between the color and the office.

Would it potentially be easier to just write acls around the "guest access" traffic since you are sharing bandwidth with your production network anyways?

EDIT:

IIRC you are using that sonicwall right? Couldn't you turn one of those ports into your guest access firewall and then do your content filtering and etc with those? Just another thought
 

18 more replies
Relevance 36.49%

I've currently got a router setup with a 10/100 card as the external NIC, and an Intel 10/100/1000 card as the internal NIC, and am running a pure Gigabit network (through a Dell Powerconnect 2608). Yes, I know, without jumbo frames the performance won't be nearly as good, but I got all of the hardware cheap, so isn't a big deal, and I do do very large file transfers regularly between my file server and desktop.

I've also got a Linksys WRT54g right now that I want to setup as a WAP/switch, ignore it's routing capabilities. If I were to plug the WRT54g into my gigabit switch, and have my Xbox and wireless laptop running off of it, would it adversely effect the gigabit network? I know in wireless networking, having an 802.11b card hooked up to an 802.11b/g network will force all clients down to 802.11b- will the same happen here? Will my gigabit clients be forced down to 100mbit, or will they still run at gigabit speeds to each other, just not to the 100mbit clients?
 

Answer:Plugging 100mbit switch into gigabit switch effects?

mpeg4v3, it shouldn't affect gigabit-to-gigabit traffic, only traffic going between the router and the gigabit clients won't be at gigabit speeds. Think in terms of 10/100 switches. Plugging in one 10 Mbit client isn't going to force the whole 10/100 network to 10 Mbit, only that port.

And your statement about mixing 802.11g and 802.11b clients isn't necessarily true. 802.11g clients connected to a 802.11g access point with 802.11b clients also present may experience some degredation, but the typically the whole network doesn't slow down to 802.11b speeds. mixing b and g client
 

3 more replies
Relevance 36.49%

Was working fine. Put it on charger over night and now won't switch on. After pushing on button it keeps vibrating every few seconds so it must have power.

More replies
Relevance 36.49%

One question I need to know

If you go from DSL modem to Router then Router to switch
my question is then
If I wanted to hook another mini linksys switch into the bigger switch would you run the cat5e cable from the first switch to a reg port in the second switch or would you run it to the uplink port and then hook the 1 or 2 computers into the reg ports of the second switch.??
 

Answer:Solved: Windows xp-question of hookup switch to switch?

Obviously, run it to the uplink port if available.
 

3 more replies
Relevance 36.49%

Is it possible to switch off a laptop screen - laptop runs Windows 7 - and prevent it being switched on again, without inputting a password?

I need to keep the laptop running, therefore I can't put it to sleep and logging-off has become a pain.

I've tried the Power Options, but the display comes on again when the mouse is nudged.

I've also tried "Fn + F6" on my Acer laptop, which switches off the screen, but an accidental key press brings it to life again.

Any ingenious little prog around? None I've seen have that crucial password privacy aspect.

Answer:How to switch off laptop screen & password protect switch on again?

a password is is used when you are out but if you are home you don't need a password.. unless you don't trust somebody...

3 more replies
Relevance 35.67%

Can any one advised me

I want to implement network on 6 Floor , 12-12 Port on each portion in one floor, total 24 ports on each floor keeping in mind distance between the each floors how do i connect them with fiber cable (which fiber cable i required) so speed remain constant for all floors.

How is my Idea to implement...right from server room in 1 floor where all internet connection providing to each floor. Cascading from 1 to 2 , 2 to 3, 3 to 4, 4 to 5, 5 to 6. UPon this setup...do i get into a low speed bandwith comparing to 1 floor Network. Does Network Gets slow by connecting through Cat5 UTP cable in cascading example.

Please adviced me.

-Thank Q>
Shiraz
 

Answer:How Can i Connect Gigabyte Switch to Gitabyte Switch

15 more replies
Relevance 35.67%

I thought that I had this all figured out, but my dad just asked me a question about my setup, and I can't answer it.

The setup is like this:
[ip-phones + computers]-->[small switch]-->[managed L2 switch]-->[router]-->[modem]

I have several ip-phones and computers grouped into blocks of 8. Each set of 8 is a medley of phones/computers connected to a small switch http://www.linksys.com/servlet/Sate...nksys/Common/VisitorWrapper&lid=3681322279B34

Each of these switches, in turn, will be connected to a managed L2 switch http://www1.ca.dell.com/content/products/productdetails.aspx/pwcnt_3448p?c=ca&cs=calca1&l=en&s=biz that will create 2 VLANS: One VLAN will contain all of the phones, and the other will contain all of the computers. In turn, each VLAN will have its own router and DSL modem, thereby separating the network traffic.

I know that I can use this L2 switch to make the VLANS based on the MAC addresses of the devices. However, the smaller switches do not support 802.1q [VLANs]. Will it be a problem that the smaller switches do not support VLANs? Essentially, will this setup work to split up network traffic?

Thanks once again,
-Roger
 

Answer:Computer, switch, switch, router, modem

I have the same DELL switch for my phones. You PoE will not carry across the linksys switches, so that is the first problem.
Next are the computers attached to the phones? Or does each device get its own drop?

And whats this about 2 routers and modems? Thats a bit over kill!! QoS would do the trick.

I would run all the devices off the Dell and attach the computers to the Phones (most IP Phones have a passthrough port) Configure the Dell with trunk ports with the Computer VLAN passing untagged traffic making it the native VLAN. While having the phones on a Tagged VLAN(If you phones conig allows you to set the VLAN in its config great! If not you can bind the MAC to the VLAN). The you create a QoS policy giving the VoIP traffic priority!
 

3 more replies
Relevance 35.67%

hi ive recently purchased a y570( last week)and ive come across a series of problems.. i have not reinstalled windows or anything. 1) gpu switch. if i turn it ON from OFF, the USB 3.0 ports stop working until i restart my computer. why is this? 2) wifi. if i switch it from off to on, it doesnt work until i restart my computer. why is this? help me please!

Answer:y570 GPU SWITCH AND WIFI SWITCH ISSUES

Hi heartbeattt,
 
Thanks for posting and welcome to the community,
 
You might want to consider updating your BIOS and the  Lenovo PowerManager, The links can be found below.
 
BIOS : http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS027242
 
Lenovo Power Management : http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS027354
 
I'm not entirely sure what is gong on with the system but I'm suspecting that it could be a software conflict. Please do give that a try and let me know of the changes.
 
Regards
 
 

7 more replies
Relevance 35.67%

i'm using idealpad s10-3t, my wireless connection switch is broken, and i can't switch on my wifi & bluetooth now.how could i on my wirelss connection in this case? p.s.i tried open up laptop bottom case, but really have no idea.i tried fn + f5, but asked me to on the switch.and i tried f2, then f9 to get defaut setting too.all didn't work. please help and i will very much appreciate that. thank you.

Answer:how to switch on wireless device if the switch is damage?

Hi and welcome,
if hardware switch is broken, did not know how ,only the visible plastic knob (good case) or the microswitch itself (bad case ) ,if the  the visible knob is the bad one, you have a chance to move a small microswitch on board , you could try as last try to fix the switch to set all wireless on ..
if you have no warranty of your machine of course ... otherwise call your local service
 
regards KalvinKlein

1 more replies
Relevance 35.67%

i have this sr224 switch and i like to connect it to my giga network sr2024 switch.
now, i plug a utp belden cat5e to port 1 of sr224 and the other end to port 1 of sr2024.
what i got is the whole panel lights of sr224 will blink very fast.
is this normal? or sr224 and sr2024 cannot be paired?

thanks in advance guys
 

More replies
Relevance 35.67%

Hello,

I use windows 7.
When I turn on laptop (acer Aspire 5742) cannot connect to internet until I switch user and log in again. Soon as I touch any browser icon the rest of computer stops responding as well. It's only me on computer. Have virgin media security/ spyware/ virus protection. Tried CCleaner. After I switch user everything is fine.
Additional info; On 16th October had great difficulty getting my emails from Yahoo. Sometimes sign-in box appeared without my security signature and different style of writing for browser remembered log-on details.

Cheers,

Gordon.
 

Answer:Solved: have to switch user to continue after switch on

11 more replies
Relevance 35.67%

Hi Net gurus,
I have a combo router/switch/wireless from my ISP.
I also have another switch/wireless netgear upstairs.
If I have a cable from my ISP router going to the uplink/Internet port on my personal switch,
How should I set both of them up?

- which dhcp should I use (I assume the ISP)?
- If above is true, i assume I simply turn off dhcp on my netgear?
- if i want to use my netgear wireless, will it assign ip addresses using my ISP routers dhcp?

Thx in advance
 

Answer:Best setup for isp router/switch and 2nd personal switch

yes
yes
yes

and i assume you meant your other switch/wireless netgear upstairs is actually a consumer router...

also, don't use the WAN port...

unless of course you don't like the ISP provided box, then you can turn everything off on it, use a bridge mode, and use your netgear... whichever you prefer
 

2 more replies
Relevance 35.67%

Hi, guys. I have connected Huawei switch S5700-24TP-SI-AC with Cisco switch 2960 using one single fiber with LX SFP. The port is up on one side (Blinking on Huawei side) and down on Cisco side...Please help.
 

Answer:Huawei switch vs Cisco switch, How to connect

What kind of 2960 switch do you have? Have you checked the interface to verify the switch recognizes the optic and all the stats report back as normal? Are you using a Cisco branded optic? Do you see light being shot out from the optic in the 2960?
 

2 more replies
Relevance 35.67%

Hi Everyone.....
So, I just got Wireless Broadband hooked up in my business. I hooked the LAN to the Router and then hooked up a 16 port gigabit switch. I have three terminals coming out of it (in the bcak of the building) as well as a line running to the front of the building. At the front of the building I have the line going into another 16 port gigabit switch. I have 4 computer terminals coming out of that switch. I AM getting internet at the back of the building .....but nothing at any of the terminals after the second switch (front of the building). Can someone help?

Thanks!
 

Answer:Router to Switch to Switch.....No Internet at end terminals

7 more replies
Relevance 35.67%

I'm at my wits end... About two weeks ago I bought an Xbox 360 and wanted to set it up on the network here at home. I'm using a Linksys WRT54G router and all the LAN ports were occupied. So I decided to add a D-Link DGS-2205 switch to the network to give me a few more LAN ports. At first I had it connected to the router via a straight-through cable. But then my room-mates started to complain that they were getting slow/spotty access to the Internet. I then came to find out that, because the switch I bought does not have an uplink port, I was suppose to use a cross-over cable. So went up to Fry's and picked up the cable I needed and put it in between the router and the switch. Unfortunately this has not fixed the problem. My room-mates are still complaining about slow/spotty internet access, while everything works fine for me.

Oh and I should mention, too, that if/when they unplug me from the router then their service goes back to normal.....

I'm new to this and have done everything I can think of... I really need help with this, please.
 

Answer:Help! Added a switch to my router and now all traffic is being sent to the switch.

did you assign ip addresses to your pcs/hosts behind the switch? You might want to make them static.

read this
 

9 more replies
Relevance 34.44%

Hi,

I just wanted to start by saying a very big thankyou to all of you that help people on this forum. It is very generous of you and it is appreciated.

I have been infected by this fake security application that says "Windows Security has found critical process activity on your system". It keeps redirecting our web searches. In safe mode I have ran malware bytes, super anti spyware and created a hijack this log all before finding this forum. Both these scans found problems initially however upon following the instructions of this forum no more were found. I tightened up my zonealarm resetting it to default and searching programs that try to run as they popped up, mshta.exe was one of the programs.

I have followed the instruction on this web site to the best of my knowledge and i will attach the logs of the various scans. All scans went well except for the combo fix scan that ran through to stage 50, flashed a page suggesting it was deleting files and then restarted my computer. I repeated it with the same result.

I now have a message that says "SQL Server could not find the default instance (MSSQLSERVER) - please specify the name of an existing instance on the invocation of sqlservr.exe." whenever i start my computer and it takes a long time before all the applications are loaded and ready to be accessed. It seems to run faster if the internet is turned off?

I am posting this from another computer.


Here are the logs - Thankyou for yo... Read more

Answer:Please Help, its getting worse

I am not seeing much in the way of malware on your system. Let's do this and see where you are after:

Download The Avenger by Swandog469, and save it to your Desktop.

* Extract+ avenger.exe from the Zip file and save it to your desktop

Please disable all anti-virus and anti-spyware programs while we do the following (re-enable when you are finished):

Run C:\MGtools\analyse.exe by double clicking on it (Note: if using Vista, don't double click, use right click and select Run As Administrator). This is really HijackThis (select Do a system scan only) and select the following lines but DO NOT CLICK FIX until you exit all browser sessions including the one you are reading in right now:




R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,ProxyServer = http=127.0.0.1:50370
O2 - BHO: Ask Toolbar BHO - {FE063DB1-4EC0-403e-8DD8-394C54984B2C} - (no file)
O3 - Toolbar: (no name) - {FE063DB9-4EC0-403e-8DD8-394C54984B2C} - (no file)
O6 - HKLM\Software\Policies\Microsoft\Internet Explorer\Restrictions present --Unless you set this.
O6 - HKLM\Software\Policies\Microsoft\Internet Explorer\Control Panel present --Unless you set this.Click to expand...

After clicking Fix, exit HJT.

* Run avenger.exe by double-clicking on it.
* -Do not change any check box options!!
* Copy everything in the Quote box below, and paste it into the Input script here: part of the window:



Files to delete:
C:\WINDOWS\Tasks\At1.job
C:\WINDOWS\Ta... Read more

5 more replies
Relevance 34.44%

Hello, I never write posts to ask questions when it comes computers, but this time I saw myself having to do so.
I have had many problems recently, and it just got to the point where stuff just doesnt work anymore.
I upgraded to Win 10 about 10 days after its launch. I loved it. I had that often problem everyone had but I could solve it.
About 20 days ago, everything worked greatly. Then, I don't remember what exactly happened, but all of a sudden I couldn't access the Groove Music App. Then I realized I couldnt open any other Windows built in apps, not even store worked. However, Edge and apps like calendar for some reason do work. So in an attempt to repair this, I messed up the Appdata folders's permissions. I had recently installed this context menu button when I right clicked, that let me take ownership of a folder, so I took the ownership "administrators."
Then, the hidden items check box in the View Tab on Explorer suddenly unchecked itself when I checked it. I looked up online and there it said it had to do with the Administrator account, but hell, I am the admin account on my PC, so this just didnt make sense. Then I read a simple reboot would help, so I rebooted and it was fixed.
This is where I mention my recent installs. Around the time, I installed this now piece of software on my pc, and this software was Bit defender Total Security. I had replaced my previous antivirus, Avast Internet Security, with this. Now, I highly doubt this program contributed to this in ... Read more

Answer:Help! My pc is getting worse

That last part went wrong somehow, here are the links:
click here
href
10-windowsstore/store-not-opening-in-windows-10-this-app-cant-open/c0de1565-9c33-4604-a1cd-b4ce18b72117?page=2&auth=1
10-windowsstore/windows-10-app-store-will-not-run-cannt-add-a-user/682d6bd8-39ae-4ee4-b0fc-c19027b44552?rtAction=1444233209744&auth=1
storeandappswontopenreregistering/
1-windowsstore/windows-store-app-not-opening-in-windows-81/9882357f-ae86-4e4d-ba37-209aa960063c

7 more replies
Relevance 34.44%
Question: Getting worse

I followed your advise to rid my computer of a BHO and virus (red circle w/white X in system tray). Now my computer takes 20 minutes to boot, asks what mode to load in, (safe, normal, MS-DOS, etc), and only loads in 640 x 480 video. I've also lost the printer driver.

Logfile of HijackThis v1.99.1
Scan saved at 12:49:56 PM, on 12/12/05
Platform: Windows 98 SE (Win9x 4.10.2222A)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\SYSTEM\KERNEL32.DLL
C:\WINDOWS\SYSTEM\MSGSRV32.EXE
C:\WINDOWS\SYSTEM\MPREXE.EXE
C:\WINDOWS\SYSTEM\mmtask.tsk
C:\WINDOWS\SYSTEM\MSTASK.EXE
C:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\SYMTRAY.EXE
C:\WINDOWS\EXPLORER.EXE
C:\PROGRAM FILES\NORTON SYSTEMWORKS\NORTON ANTIVIRUS\NAVAPW32.EXE
C:\WINDOWS\SYSTEM\ATIPTAAB.EXE
C:\WINDOWS\SYSTEM\DDHELP.EXE
C:\PROGRAM FILES\HIJACKTHIS\HIJACKTHIS.EXE

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = about:blank
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = about:blank
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.yahoo.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.yahoo.com
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Bar = about:blank
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = about:blank
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.yahoo.com
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant ... Read more

Answer:Getting worse

hi, welcome to TSG.
you don't appear to have a firewall, even if you have a router you still need
a software frewall, downlaod the one from the link below!
Filseclab Personal Firewall Professional Edition

http://www.filseclab.com/eng/download/downloads.htm

http://www.wilderssecurity.com/showthread.php?t=92710
Download the pocket killbox

http://www.bleepingcomputer.com/files/killbox.php
Download A2

http://www.emsisoft.com/en/software/free/

update A2 and run a full scan.
*Download Cleanup from Here

http://www.stevengould.org/software/cleanup/download.html

* A window will open and choose SAVE, then DESKTOP as the destination.
* On your Desktop, click on Cleanup40.exe icon.
* Then, click RUN and place a checkmark beside "I Agree"
* Then click NEXT followed by START and OK.
* A window will appear with many choices, keep all the defaults as set when the Slide Bar to the left is set to Standard Quality.
* Click OK
* run cleanup

have hijack this fix these entries. close all browsers and programmes before
clicking FIX.

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = about:blank
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = about:blank
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Bar = about:blank
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = about:blank
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = about:blank
R0 - HKLM\Software\Microsoft\Internet Ex... Read more

1 more replies
Relevance 34.44%
Question: bad to worse

Now I'm getting a little spooked.First it was just some irritating re-directs from Google searchers.Then multiple windows began propagating, sometimes blaring music, voices, phone sounds.Then, trying to work my way through the instructions in the preparation guide, I discovered that attempting to run the gmer.exe crashed me, locked up the processor, prevented me to restarting, the whole thing.Now, my touchpad has stopped responding. I uninstalled and restarted to replace the driver, but no effect. I am having to use a USB mouse, which works OK, but has not improved the touchpad.What's next?!Just curious. A question, for those of you who have experience with this forum--how long does it usually take to get help? Should I assume that all topics are addressed eventually, as folks find time? If I have failed to supply some bit of information, or violated some etiquette, I'd rather know, make my amends and start over that wait on the sidelines longer than necessary.Or should I just throw this piece-of-crap netbook out the window and get a real machine?

Answer:bad to worse

Hello pfosinger,It's hard to say how long it will take for a topic to get picked up. I know how frustrating it is when your computer isn't working properly. Let me assure you that your topic isn't lost, forgotten, or ignored. We work with hundreds of logs every day, so we have devised a means of seeing only those topics that don't have responses yet. At the moment, we have nearly 300 unanswered topics, the oldest dated Aug. 26, 2010 at 5:14 pm Eastern Daylight Savings time in the U.S.A. Your log topic is dated Aug. 30 2010 at 10:00 pm using the same time zone.Our volunteer MRT team members have various levels of expertise and training, so while we try to take the oldest DDS/HJT logs, it is often the skill level of the particular helper and sometimes the operating system that dictates which logs get selected first. Some infections are more complicated than others and require a higher skill level to remove. Without that skill level attempted removal could result in disastrous results. In other instances, the helper may not be familiar with the operating system that you are using, since they use another. In either case, neither of us would want someone to assist you who is not familiar with your issue and attempt to fix it.Please be patient. It may take a few more days to get a response but your log will be reviewed and answered as soon as possible. I advise checking your topic once a day for responses as the e-mail notification system is unreliable.Orange ... Read more

2 more replies
Relevance 34.44%

new note pad mesgwhen I boot up.
[.ShellClassInfo]
[email protected]%SystemRoot%\system32\shell32.dll,-21787

I get this on start up and firefox is giving me an error

Well, this is embarrassing.

Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page
Can any one help me out?

Thank you so much
 

More replies
Relevance 34.44%

I just finished a download that had some pretty nasty side effects. I am getting a pop up saying "It is recommended to update you antispyware protection to prevent data loss. Please install the most up-to-date antispyware for you" then an ok button. This isn't the only one, there are about 2 or 3 that seem random, none of which seem encouraging at all. Please help.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 10:48:46 PM, on 1/26/2009Platform: Windows XP SP3, v.5657 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.20935)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\Ati2evxx.exeC:\Program Files\LSI SoftModem\agrsmsvc.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\Program Files\Bonjour\mDNSResponder.exeC:\Program Files\Java\jre6\bin\jqs.exeC:\WINDOWS\system32\svchost.exeC:\Program Files\TVersity\Media Server\MediaServer.exeC:\WINDOWS\explorer.exeC:\Program Files\Unlocker\Un... Read more

Answer:pop ups and probably worse

Hi,Your system is severly infected. Problem with these infections nowadays is, it causes a lot of damage. Even if we clean the malware off your system, I can't guarantee that your system will be clean afterwards, because these infections/bundles leave a lot of leftovers behind that most scanners won't even recognise and logs won't show.Also, I can't promise you we can repair all the damage it caused... Even after cleaning the malware, you can still get errors afterwards because of the damage. Solving these is not always possible since it will be searching for a needle in a haystack to find the right cause and solution.So, we can try to clean this up and do what we can, but keep in mind that we can't solve ALL problems this malware already caused.In light of this it would be wise for you to back up any files and folders that you don't want to lose before we start. Reason I am telling this is because when a system is so terribly infected and we try to clean this up manually, the damage that is already present may interfere with our removal attempts. Actually, this doesn't suprise me at all.I notice that you never scanned with an Antivirus previously before starting this thread - because you don't even have an Antivirus installed!This is somewhat suicidal in today's digital world.That's why I want you to install one first!!* Please install Avira Antivirus: http://www.free-av.com/This is a free Antivirus.Perform a full scan with Avira and let it delete everything it i... Read more

18 more replies
Relevance 34.44%
Question: Bad to Worse

Friends,

It appears my browser (IE/XPpro non-sp2) has been hijacked - at boot time I get an IE page that advertises WinAnti-Virus and demands I purchase. I can close the window and continue, but there are 37 processes running and the drive is constantly active, where an identical box has 28 processes running. I have downloaded (but not run) all the software you recommend, but apparently nudged the wrong bad actor and now the system won't boot at all. I have backed up some data, but don't want to loose everything if I can help it. I don't know how to use command line recovery and I can't remember the Admin password to use it anyway.

This happened once before and I let the system just run and reboot itself and after about 4 hours it was successful. I have about 4 hours on it now and no luck. I will let it run all night to be sure it doesn't heal itself.

If I reload XP, will all my data still be there?

Things started to go south about 2months ago when McAfee found Vundo and couldn't seem to kill it off.....

thanks, GearHead.
 

Answer:Bad to Worse

Hi GearHead,

Check out this link and try the removal tool from Symantec.

READ ME: Virtumundo Problems/Resolution Threads

Should that fail, I would suggest following the steps here:

READ ME FIRST BEFORE ASKING FOR SUPPORT: Basic Spyware, Trojan And Virus Removal

Best luck
PP
 

2 more replies
Relevance 34.44%

my topic is here http://www.bleepingcomputer.com/forums/t/134217/virus-and-rootkits/ and it has been a couple days since a reply, and i was told not to reply again until i get a reply from someone to help me. but my computer is now losing the whole task bar whenever i close anything...i can bring up the task manager and see everything there, and i can ALT+TAB between programs and they will come up, but when i press the windows button will not bring up the start menu. the HJT log is in that other topic. thank you for looking

Answer:I Think My Pc Is Getting Worse

Hi dizz15,I know it's frustrating, but please be patient. It may take a while to get a response, because the HJT Team members are very busy working logs posted before yours. They are volunteers who will help you out as soon as possible.If after 5 days you still have received no response, then post a link to your HJT log in the thread titled "Haven't Had A Reply In Five Days?".To avoid confusion, I am closing this topic.

1 more replies
Relevance 34.44%

I have been workin on this for several days now and I am at my wits end. I am attaching my Bitdefender log and an HJT log. I have followed all of the instructions in the "Before Posting" page. And should tell you the following. My Add/Remove programs hasn't worked in years so when necessary I use the free trials downloadable from various places.
When I try and run Microsoft Windows Defender it says I need to perform an upgrade, and will not open.
I tried running Pandascan this morning and waited for over two hours and it never did complete downloading.
As I mentioned, I am at my wits end and believe it's time for some help.
Thanks
 

Answer:The more I try the worse it gets! I need Help!

Welcome to Majorgeeks!

You did not attach your HJT log. Make sure you follow all instructions in step 7 properly and then attach your HJT log.

You should look at your Bitdefender log (change the .txt to .html and then double click on it and you can see it in your browser) You need to delete those items it is pointing out in your email.

Is your copy of Windows licensed to you and has it been activated with Microsoft?

What happens when you try to use Add/Remove programs? Be specific.
 

9 more replies
Relevance 34.44%

Hi. I hate to be a nooge, but I posted a problem I had a week ago with a single search term being redirected in Google -- only that one search term was redirected. That much has stayed constant -- I've been using Google all week and only that one search term is redirected. My post has dropped down to page 12 and I think it's pretty much off the grid by now.Tonight I tried to run Hostsman to update my Hosts file and Avast! immediately put up the Warning notice that:12/2/2009 11:40:42 PM SYSTEM 2016 Sign of "Win32:Delf-MZG [Trj]" has been found in "C:\Program Files\HostsMan\hm.exe" file.I quarantined the file, but now I'm very concerned. When it was just the one redirect it was interesting, but this has me a bit panicked.I've copied last week's post here.Can anyone help?EDIT: Okay, it looks like Avast! may be reporting false positives right now with virus database 091203-0, the one I'm using right now, according to what I read in the various forums. I'll keep a good thought, anyway.But my redirect problem IS still there, and I'd like to get to the bottom of it, if anyone can help. Thanks!Hello again -- I was here with a severe problem about a year ago. It took several weeks, and a lot of help, but I got cleaned.I also learned a few things. I have since installed the NoScript and Cookie Whitelist addons to Firefox, I installed the free version of ZoneAlarm, and I installed a Hosts file manage... Read more

More replies
Relevance 34.44%
Question: It's worse

my computer has been acting up for awhile running really slow, but now it's started this trick of adjusting the screen every little bit. It either moves up or down. It changes the sizes of the window as well. Then i noticed down at the bottom in the task bar, a button appears for just a second with a little icon in it. Then it disappears before i can do anything. Now, my email has started bouncing and i can't get outlook express to connect. Also, i was kicked off yahoo messenger and then all i could get was page cannot be displayed on even my home page. Here is my HJT log. I would appreciate your help.

Demi

Logfile of HijackThis v1.99.1
Scan saved at 1:01:23 AM, on 3/1/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton Internet Security\NISUM.EXE
C:\Program Files\Norton Utilities\NPROTECT.EXE
C:\WINDOWS\System32\sistray.EXE
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\HP\Dig... Read more

Answer:It's worse

6 more replies
Relevance 34.44%

 Can anyone help??? It all started when I installed a new game (well new for my old PC) the other day, when ever I tried to load it, once it got past the intro video it just returned to the desktop, most of the time, it did occasionally work. So I went to look on the web for advice and was told to update my sound and video drivers. My PC is an old PII 350 with windows 98. I went to ATI and downloaded what it said was the latest driver for my card, now when the game does play the colours are all wrong and blocky (I have also updated direct X above the one the game needs). So I tried a sligthly older driver, which was even worse, so I put the newer one back on. To add to this the company who made my sound card (Aureal) have gone out of business, so don't give drivers now. I have found on another page what was supposed to the the latest driver they did release, but when I load the diagnostic tool on my computer (some sort of direct X thing) when I test the sound, it says there is a fault there too. It seems that what ever I try to do, the thing just gets worse, I am starting to think about getting another PC, but when it works, it does everything I need. Does anyone have and advice how I should try and fix all this? Thanks James

Answer:It just keeps getting worse

Did you simply overwrite the videocard drivers? If yes, you may wish to thoroughly clean your computer by uninstalling them and running a program such Advanced System Optimizer V2 or Advanced Uninstaller Pro 2004 There is also a useful tool that removes drivers for you.. I'll get back to you on that once I recall the name. Even though your soundcard manufacturer has gone out of business, use Google to search for drivers. There is quite a high chance of still finding them.As for DirectX, see to it that you have the latest version from Mirosoft.Buying a new PC will not solve your problems. It is not the PC's fault, it is the users fault. Your problems will just start anew if you donot know what you're doing.

1 more replies
Relevance 34.44%

I have a virus on my computer in which my Windows Defender warning pops up every few minutes I remove it and it keeps coming back. I am also getting lots of internet pop-up ads. Please help before I throw my lap top out of my window. I ran hijackthis:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:44:47 PM, on 12/12/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\McAfee\MBK\MBackMonitor.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\McAfee\MSC\mcmscsvc.exe
c:\program files\common files\mcafee\mna\mcnasvc.exe
c:\PROGRA~1\COMMON~1\mcafee\mcproxy\mcproxy.exe
C:\PROGRA~1\McAfee\VIRUSS~1\mcshield.exe
C:\Program Files\McAfee\MPF\MPFSrv.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Hewlett-Packard\Shared\hpqwmiex.exe
C:\PROGRA~1\McAfee.com\Agent\mcagent.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Java\jre1.5.0_06\bin\jusched.exe
C:\Program Files\hpq\HP Wireless Assistant\HP Wireless Assistant.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\HP\QuickPlay\QPService.exe
C:\Program Files\HP\HP Softw... Read more

Answer:Please help! It's getting worse

it is:
browser modifier: win32/fotomoto
 

2 more replies
Relevance 34.44%

Sorry to be such a bother but this problem is driving me bonkers!
Every turn develops into a new drama-here's the situation so far-

(1.) When I go to click on a program (any program) my computer either immediately or soon afterwards pops up a window that says "program error-process has already been exited-has generated errors and will be closed by windows. You will need to restart the program. An error log is being created." Of course restarting the process only sends me in circles-the same thing continues to happen-sometimes, obviously, I'm able to start the program but usually during the course of operation the "program error" window pops up and it's back to musical chairs again!
My system is, O/S Windows 2000 Pro, P4-1.6GHz 400MHz/P4FAN (P4-1600AR), Motherboard-D850MVL -MB Intel D850MV w/LAN, Rambus 256MB (2).

(2.) Now if I didn't already have enough problems I've apparently been infected with the Fortnight.E virus-it gets worse, in turn, I infected my ex-wife with the virus via an email (well, I'm sure you can imagine my situation-it would be better to have my nipples dipped in honey and dangled over a pool of hungry piranhas-she's pissed! Of course, the fact that the virus installed porno weblinks into her favorite file made matters even more unbearable-you'd think she was a nun or something! At any rate,
I have run a Panda On-Line AV-Scan-several Norton AV scans-SpyBot, Ad-Aware and SpySweeper-nothing works!
... Read more

Answer:Sos....from Bad 2 Worse!

6 more replies
Relevance 34.44%
Question: From Bad to Worse

Hello to all the experts here at Bleeping Computers.

I was in the process of following your steps from the "Preparation Guide" when my computer decided to crash big time.
Initially I had my homepage hijacked by something called start.search.us. That by itself didn't seem to be a big deal. I was proceeding through the steps and made it to step 8 (Create a GMER Log). Approximately 5 minutes into the scan my entire screen went all screwy. It looked like the GMER scan program filled the screen and scrambled itself.

Now my computer won't work at all. After a restart, the computer locks up on the black screen with the green progress bar (Microsoft Corp underneath). I tried a safe mode reboot but it stops loading at the following line of text, "Windows\System32\Drivers\avgidshx.sys" This was the same line of text that was being scanned during the GMER scan.

After another restart (so many I lost count) my computer reads the following, "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:...." Several options are listed but even after inserting the original operating disc to repair, I can't get past the green progress bar thing.

Help!!! I'm moments away from turning this laptop into a very unaerodynamic flying brick.

(I'm typing this on my wife's Macbook, in case anyone was wondering how I could post)

More replies
Relevance 34.44%

I tried to run a payment on a website and the submit button did nothing but make the cursor blink which it still is.  I looked under inspect Element and there was a JS file that downloaded.  I looked at it and it looked fishy.  I tried to run the normal cleaning techniques (ADW Cleaner, JRT, RKiill etc) and they all returned a messagge. "the service cannot accept control messages at this time "
 
It is slowly getting worse by the minute so I am not sure that this will even get to someone in tim,e cause I know u guys are backed up but if possible I dont know what to do I tried to use msconfig.exe , and the search functions to get safe mode to work but I just get either nothing happening or the same message.  I am afraid that if I turn off the computer to shift into safe mode that it will loack up..  Any helop would be appreciated.

Answer:I have something bad going on and ts getting worse byt the second

Sorry, but it seems that your pc is infected with a virus or malware which is going to take some more work and a deeper look. No sense running a bunch of tools here.Please follow this Preparation Guide, post in a new topic and include a link to this thread.Let me know if all went well.

3 more replies
Relevance 34.44%

Ok my computer has been progressivly getting worse becuase before i wasnt able to enter my control panel becuase explorer would just crash. And now i started up my computer and restarted a couple of times and i cannot see my tool bar(the one with the start button) and my cousin is bringing my xp disk christmas.. what can i do in the meantime? oh and when i click my windows key it doesnt do anything.

Answer:it just got worse...

looks like a virus to me
what antivirus program are you using? and is it up to date?

9 more replies
Relevance 34.44%

Is a 635 slower than a 640? Is the camera worse? Is there less internal memory? What are the differences?

Answer:How much worse is a 635 than a 640?

Here's the differences compared to the 640...
The 635...
...has half the RAM, which meant Facebook and Messenger refused to run in my case on W10M, multitasking is less smooth and whatnot. But it works for the basics.
HOWEVER, there are some 635's that have 1 GB of RAM, matching the 640.
...is not supported currently so you won't be getting Windows 10 Mobile easily, although some 635's have indeed been getting it with little effort oddly enough.
...has an inferior, lower-resolution 5 MP camera with no LED flash. (the 640 has a flash and an 8 MP shooter)
...is smaller than the 640.
...does not have a proximity sensor.
...does not have double-tap to wake or Glance.
...has a smaller and lower-resolution display.
...has a smaller battery.
Although the 635 and 640 share the same Snapdragon 400 processor and 8 GB of storage + microSD.
The 640 is the better all-around phone but I your needs are very basic and the 635 is significantly cheaper then the 635 may make sense.

2 more replies
Relevance 34.44%

I've been trying to fix this computer for several days now, and it keeps getting worse instead of better

I know from my Ad-Aware scans that it has coolwebsearch on it, but CWShredder doesnt find anything wrong when I run it. ad-Aware does and keeps fixing it, but it's back within seconds. I've also run spybot search, about buster, and pest patrol. My HJT logs are getting worse, not better.

I would be much obliged if someone could help me; I can't figure out what else to do.
Thanks!
-Vanessa

Here is my HJT log, let me know what if anything else will help.

Logfile of HijackThis v1.97.7
Scan saved at 11:41:07 PM, on 2/4/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Norton Internet Security\ISSVC.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\HPConfig.exe
C:\Program Files\HPQ\Notebook Utilities\HPWirelessMgr.exe
C:\Program... Read more

Answer:It's Getting Worse....

I downloaded the newer version of HJT...new log file is:

Logfile of HijackThis v1.99.0
Scan saved at 12:13:41 AM, on 2/5/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Norton Internet Security\ISSVC.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\HPConfig.exe
C:\Program Files\HPQ\Notebook Utilities\HPWirelessMgr.exe
C:\Program Files\Norton Internet Security\Norton AntiVirus\navapsvc.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\WINDOWS\system32\iety.exe
C:\WINDOWS\system32\wscript.exe
C:\WINDOWS\system32\wscript.exe
C:\WINDOWS\system32\msbo32.exe
C:\DOCUME~1\ness\LOCALS~1\Temp\Temporary Directory 9 for hijackthis.zip\HijackThis.exe
C:\WINDOWS\system32\NOTEPAD.EXE
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\system32\wscript.exe
C:\WINDOWS\system32\cmd.exe
C:\WINDOWS\system... Read more

3 more replies
Relevance 34.44%
Question: Bad to worse

I posted a previous problem in regards to my computer shutting down at random and suspect virus. It seems things have gone from bad to worse in rapid time. I have lost internet connection, I open a program "regedit" and it closes, same with "msconfig" I cannot boot in safe mode. Suddenly all that was in my "connections" are completely gone, that folder is now blank. I know in the past I have tested your patience here but am throwing myself at your mercy once more. Sorry if this should have been posted with my previous question but I am unsure as to how protocol is.

btw forgot to give the basics.
Winxp
Medion computer.
should be current on updates.
again tia.
 

More replies
Relevance 34.44%
Question: Bad to Worse.

Hi all,  So not only does the Control Panel on my T520's nVidia card fail to work, but safe mode doesn't either. It gets stuck in a reboot loop for memory reasons. Using last known boot configuration I can get it to boot normally but the networking cards/drivers don't work. They are detected in Windows 7 but ipconfig only gives the Tunneling adapters.  Any ideas? Or should I just send it in for servicing?













Solved!

Go to Solution.

Answer:Bad to Worse.

Hi kingofthering
 
If you need to use the machine temporary or to ensure your Nvidia GPU is defect, you could change the graphics settings in the BIOS to Integrated Graphics.
 
If you are not technical savvy or / and wish to save the hassle, it's probably good to send it in for servicing.
Have a nice day!
Peter
W520 (4284-A99)
Does someone?s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
http://forums.lenovo.com/t5/General-Discussion/Dol?by-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/6...
http://forums.lenovo.com/t5/IdeaPad-Slate-Tablets/?IdeaPad-Tablet-Sound-Enhancement-Thread/td-p/7150

9 more replies
Relevance 34.44%

i now cannot access my e-mail since doing an update every time i click on the e-mail icon nothing happens its just blank, nutty norm again

Answer:its seems to get worse

What email icon?????????????

3 more replies
Relevance 34.44%

Hey all.
I am loaded with popups. I went through all my prelim scans, booted safe mode, all that jazz. I didn't notice anything for about three minutes, then it all came back. If anything, they just seem to be getting worse. Anyway, here's my log, thank you much for your time.

Logfile of HijackThis v1.97.7
Scan saved at 11:43:05 PM, on 11/27/2004
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\Tablet.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\NORTON~1\navapw32.exe
C:\WINDOWS\Mixer.exe
C:\Program Files\Hewlett-Packard\PhotoSmart\Photo Imaging\Hpi_Monitor.exe
C:\Program Files\Microsoft Hardware\Keyboard\type32.exe
C:\Program Files\Microsoft Hardware\Mouse\point32.exe
C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\E_S4I2G1.EXE
C:\Program Files\QuickTime\qttask.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\WINDOWS\system32\mllcrap.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\system32\wsxsvc\wsxsvc.exe
C:\WINDOWS\system32\vmss\vmss.exe
C... Read more

Answer:Keeps getting worse.

Hi
You will need to get rid of the Peper Trojan first so run the PeperFix from my list..

After that
Make sure you have already run Adaware, Spybot S & D(check for updates) as these will do a preliminary clean first.Some files below may not be present after running the above programs.

Then....
Turn off your System Restore SEE HERE Reinstate it when your log is cleaned and then create a new restore point.Close your browser window and run hjt in safe mode... HOW TO RUN SAFE MODE and have "Hijack This" fix all the following items by placing a check in the appropriate boxes and selecting "fix checked".
Folders that have been highlighted RED in the log will need to be uninstalled.Check first as some folders maybe uninstalled via the Add/Remove program. Files highlighted in BLACK in the log will need to be removed from your hard drive. Make sure to have your system set to show hidden files and folders.. HOW TO SHOW FILES ..Please post a new log when finished...

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = file://C:\WINDOWS\system32\SearchBar.htm
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =
O2 - BHO: (no name) - {016235BE-59D4-4CEB-ADD5-E2378282A1D9} - C:\Program Files\CxtPls\cxtpls.dll
O2 - BHO: (no name) - {C5183ABC-EB6E-4E05-B8C9-500A16B6CF94} - (no file)
O3 - Toolbar: Band Class - {C5183ABC-EB6E-4E05-B8C9-500A16B6CF94} - (no file)
O4 - HKLM\..\Run: [W7ABA] c:\documents and settings\... Read more

5 more replies
Relevance 34.44%
Question: It could be worse

I come to this forum and read all the time in search of knowledge . With the reading and help of the fine people here I have fixed many problems . Some posts I have read complain about a program taking a minute to start up . Some complain about a slow boot up . Well when I said it could be worse I found one that couldn't be . Uncle brought his PC out to me to see iffin I could make it work for him . HP Pailion with 128 ram and XP Home . Hooked it up to my monitor and turned it on . One hour and 15 minutes later I could finally do something . First thing I attempted to do was run defrag . It took 15 minutes for the menue to work enough to let me click on defrag and another 29 minutes to open defrag . Now I have it open and click on derag to run , 7 hours later it finished . Pc Was still slow . A bit better but not much . Started to empty temp folders . One temp folder took 15 minutes to empty . Emptied all the temp folders and the history then deleated some programs . Only deleted 3 small programs but with them and the temp folders I regained 17 gigs of hard drive . Did another defrag and this time it went much faster . Then I started on malware and viruses . Did the ususal scans I learned from here and took a bunch of them out . Got to the point that the PC was healthy again . Took out the 128 megs of ram and replaced it with 512 which is the max for this HP . Now it is running very smooth and probably as fast as it ever will . So when you think you are running slow do t... Read more

More replies
Relevance 34.44%

I've had 10 for a few months now. During that time I've had several automatic updates. Most have been unnoticeable, a few others were anti productive. The first and the last (two days ago) have been horrible. When I first downloaded 10 I immediately lost my CD/DVD drive. No matter where I look my computer can't find the old one. It also disabled sound from anything I recorded. The latest update is making me log in if I leave the computer for more than a couple of minutes. It also makes me wait before the log in window pops up. I'm beginning to think that switching from 8 to 10 was not a good decision.

Answer:Just when you think it can't be worse!

Would you consider doing an in-place upgrade install, also known as Repair install ?
Repair Install Windows 10 with an In-place Upgrade

9 more replies
Relevance 34.44%

dear all, any softwares that can fix this...

3 men go into a hotel for the night. The clerk informs them that it's $30 for the room, so they each take out a $10 bill to pay for the room. So far they paid $30, correct? You with me so far? Good.

A few moment after the men went up to the room, the manager reminds the clerk that there was a special promotion that night, and that the room was only $25. So the clerk gives the bell boy five dollars to bring back to the men. On his way up to the room, the bell boy says. "Hey, I'm not stupid, I'll give each of the man a dollar back and keep two for myself, $5 right, 30-5=25.

Well, since the bell boy gave each man a dollar back, that means each man only paid $9, correct?

Well, the last time I checked, 9x3=27, plus the 2 that the bell boy took makes 29, what happened to the other dollar??????

[This message has been edited by kokaik (edited 07-03-2000).]
 

Answer:the more you think, the worse it gets

7 more replies
Relevance 34.44%
Question: Gotten Worse...

I know i posted about it a couple days ago with my computer going down the pooper. Well it was running real smooth untill recently. i had lots of disk drive space open now today it says i have 55.6GB of free space now i have a total of 74.5. I have been running virus protectors and spyware programs but its not working and there are icons showing up on my desktop that i cannot get rid of.... Do i have to re install windows or something? Sorry to ask again but i need help. Also i forgot to mention in my add remove programs there is a new program called search plug in and also micromedia flash player which im unfimiliar with and they are the biggest files in there.
 

Answer:Gotten Worse...

Please don't start a new thread for the same issue

If you are not getting any responses bump the original back to the top by simply posting to it...

here's the oiriginal... http://forums.techguy.org/t313054.html

closing this one

buck
 

1 more replies
Relevance 34.44%

Hi, I have been using PC tools for the last couple of years with no bother. However, when I wanted to put it on my laptop I lost the ability to access the internet. They told me (eventuallY) to reboot using my windows XP home edition disc. having done that I was initially able to access the internet, but I could not open links or download any thing, and now explorer won't open at all, I just get error reporting. Things have gone from bad to worse and I need some help.Thanks

Answer:going from bad to worse

sorry - spyware doctor

2 more replies
Relevance 34.44%

I've had 10 for a few months now. During that time I've had several automatic updates. Most have been unnoticeable, a few others were anti productive. The first and the last (two days ago) have been horrible. When I first downloaded 10 I immediately lost my CD/DVD drive. No matter where I look my computer can't find the old one. It also disabled sound from anything I recorded. The latest update is making me log in if I leave the computer for more than a couple of minutes. It also makes me wait before the log in window pops up. I'm beginning to think that switching from 8 to 10 was not a good decision.

Answer:Just when you think it can't be worse!

Would you consider doing an in-place upgrade install, also known as Repair install ?
Repair Install Windows 10 with an In-place Upgrade

0 more replies
Relevance 34.44%

Like all AOL software, I'm wondering if the new AIM version is worse than the previous. Has anyone tried it yet?

It seems to have a lot of the features that AIM mods have introduced. I use DeadAIM myself, and have loved it for years. I tend to like things minimal. I've tried GAIM and Trillian, but I only use AIM, and GAIM messes up direct connections and profiles. I've tried AIMutation (sp?) and didn't like it much either.

What do you guys think?
 

Answer:AIM 6: worse because it's new?

i like it, but alot of people don't.
you just have to tweak it to the way you want it.
 

3 more replies
Relevance 34.44%

Just a curiosity question. I found an old AMD K6 chip in a scrap computer.
I would like to know if it is better/faster than my "Cyrix Instead" with MMX?
Both I think are 266's and socket 7.......

It's for my first PC that is now used for solitaire and surfing the net...

And what steps, if any, should I do to swap them, if the K-6 turns out better?
 

Answer:Better/Worse? Two old CPU's for old PC..

10 more replies
Relevance 34.44%
Question: from bad to worse

please help-got a new laptop trying to use the wi fi.there is no wireless connection icon any where.maybe there no driver,im guessing. do i need to use the disc that came with my router.my other laptop works fine.maybe i need to use another keycode,i dont know please help.thanks

Answer:from bad to worse

I think you're already running a thread on this: click herePlease don't double-post.

1 more replies
Relevance 34.44%

Hi,
I made a post about my windows 7 explorer crashing, it seem to only happen when I move files from my internal to my external hard drive. it was still happening, nothing i tried fixed it.but NOW its gotten worse. Its crashing on a loop...every single second.this happens as SOON as I SIGN ON...in seconds it crashing and looping
and I cannot do a thing but use my internet...I get a message that tells me my program
fences (stardock program) has detected that there is problem with 7, and it disables itself, Then windows7 explorer crashes. sends info. then restarts...If I start a video or a program before it closes (which is seconds) then it will run. I have been up for HOURS trying to get this solved. I have NO clue what is going on. I ran Anti-Spyware free edition, found 8 harmful things, had them deleted. I also ran my microsoft essentials...BEFORE that..and it Finds nothing...it NEVER does. but anti does...that confuses me.

SO what is going on? what do I do? PLEASE anyone, I am computer illiterate...
I have windows 7 (genuine)
32bit home premium.
I was tryng to get the rest of the info. but I can't as the explorer is completely locked up as I type this...please help I am so frustrated, I want to make Bill Gates come fix my computer lol...who has his number!?
ASLO! After it crashes and re-opens it keeps bringing up the c drive file location library? every single time, so now i have a list of these file locations open...also I JUST get a message saying that my firewall is... Read more

Answer:Oh no its worse! Help!

Can you get into Safe mode instead? If so, does it happen in safe mode?
Safe Mode

EdiT:--------------------------------------
Do you have a system restore point you can revert to?
http://www.sevenforums.com/tutorials/700-system-restore.html

Oops sorry just read last line of your post.

9 more replies
Relevance 34.44%

hi

im connectiong a switch to a switch, what connection do i use straight or cross.


thanks
 

Answer:switch to switch straight or cross

standard rj45 cables
 

5 more replies
Relevance 34.44%

We are moving to a new office location. The guys who will be setting our network is proposing the following equipment:

1. 3Com 24-port 10/100 mbps switch
2. 24-port Patch panel
3. 6u data cabinet
4. 1u cable management

The new office will be a 2-floor building with around 40 computers. I asked some of my friends who are more expert on network setup and told me typical switch (Linksys, Cisco) will do if we need to save some money.

What do you think? Thanks a lot!
 

Answer:Is 3Com 24-switch necessary or typical switch will do?

Well, first off, I'd be specifying a gigabit switch for expandability, I can't see investing in a 10/100 switch in 2010! If you don't need a managed switch, or need to save money initially, and unmanaged switch will probably be significantly cheaper.

In point of fact, if you want to go really cheap, you can get away for less than $100!

http://www.newegg.com/Product/Produ...igabit switch&bop=And&Order=PRICE&PageSize=20
 

3 more replies
Relevance 34.44%

Hello all

I just installed 4GB ram on my 32 vista and it only recognized 3GB in the os (vista 32) and all 4GB in the bios. so I decided to use the /3GB Switch, by using that command in bcdedit, it all worked good. The problem is now I have 3069 mb physical memory and ONLY 209 mb Kernal Memory!!! so I used the "bcdedit /deletevalue IncreaseUserVa" and bcedit said it worked successfuly so i restart my pc and it STILL had the same memory! so right now im stuck with only 209 mb Kernal memory! any ideas on how to fix this? I looked all over google and found nothing. Should I keep these settings or try and fix it?how do i fix it?
 

Answer:3GB switch will not switch back, vista 32!

I am not too familiar with those commands you speak of, but I do have a question: Is the video card built into the motherboard? If so, what amount of system memory is being shared with it? Besides that, I have no more ideas to offer you. Sorry
 

3 more replies
Relevance 34.44%

Hello,
I have my new router up and running. As part of the upgrade, I replaced an old WRT54G I had been using as a wired WAP and switch in my living room with a Trendnet 8 port gigabit switch. I was getting good connection of my TV, XBOX, Blu Ray players through the LAN ports on the WAP before. Now I replaced that with the switch and get nothing. I thought the switch was plug and play and I'd have to do nothing. The connection lights are on but the devices say they can't get an IP address from the router. Any idea why? For reference, I am using the Buffalo G450 router and another one of these switches In another room.
Any idea what I should try next?
Thanks,
Pay
 

Answer:Replaced WAP with switch, now no connection through switch?

Make sure their isn't a specific uplink port that has to be used on the switch and your going straight from the router to the switch.
 

5 more replies
Relevance 34.44%

I have a PCI WIFI adapter card fitted to my PC and I have discovered the transmission is causing some interference with my wireless telephone. Is there a way to de-activate the wifi card temporarily from the PC keyboard in order to use the telephone, without powering down the PC?Apologies if this is obvious to the learned, but I am new to this wifi thing ;-)

Answer:Switch off PC wifi card without switch off PC....

it's a rare problem.You can disable the card - go to Control panel and click on the system icon. Then click on the Hardware tab and on the Device manager button. Look for your PCI card - it will be under network adapters - and double click on it. Now look at the 'Device useage' box at the bottom, and select 'Do not use this device - disable' option. Reverse the procedure to enable the card.This all seems like a lot of effort to resolve the problem - have you tried selecting a different channel on your wireless phone's base station?

3 more replies
Relevance 34.44%

Hello all,
I had been looking and reading articles about this (3 days so far) on SmallNetBuilder and DD-WRT but was unable to solve it.
Can anyone clue/link me in what might be wrong or what I might be missing?
A friend thinks the switch is messing things up and I should do a router-router-router configuration (instead of router-switch-router).
What do you think?
Thanks in advance.


Why:
Got a router that has a USB port (for print server)

Goal:
Get all PCs to see printer and have access to the internet

Problem:
2 out of 3 PCs can't see printer
(the PCs that are behind the switch can't; the PC doesn't have a switch in the way can see the printer)

Limitations (right now):
-Internet cable comes in downstairs. (connected to modem and immediately to router than to the wall. one PC is connected to this router which i'll call 'router_1')
-walljack is a ethernet cable that goes to a switch (inside a wall in the closet).
-Printer is upstairs (along with other PCs)




Code:
(internet)
|
{modem}----{router_1}----{pc}
|
{switch}
/ \
{router_p} {pc_1}
/ \
{printer_1} {pc_2}

Additional info that might not be useful?:
router_1 = Dlink DI-624
(an old but reliable router we got from 4 years ago.) Using newest Dlink firmware (2006)

router_withPrintSever = Asus WL-520GU.
Trie... Read more

Answer:2 Routers 1 Switch: PC behind a Switch seeing Printer

Are both doing routing?

If so routing twice is never good. You probably have Router one handing out something like 192.168.xxx.xxx and router 2 is getting 192.168.xxx.xxx and handing out something like 192.168.yyy.yyy. Turn routing off on router 2 and this should fix your issue.
 

3 more replies
Relevance 34.44%

Hi, i have a AIO B50-30 and I'm trying to connect via the hdmi input socket my TV satellite box. I have found out recently that there is a switch on the side of the unit that will allow you to switch to the input channels so allowing viewing of the box and other like units Xbox etc. My issue is that I'm pressing the switch but nothing is happening it's simply staying on my desktop on Windows 10. Can anyone please help to see if I'm doing this right or am I missing something ?.  Any help, suggestions would be gratefully received since there is very little on the subject in connection with this particular model .thanks in advance.

More replies
Relevance 34.44%

I need a new 24 port POE 10/100 + 2 port non-POE/POE 10/100/1000 port switch.

I was looking at either the
3CR17571-91 , ~$1200
http://www.3com.com/products/en_US/detail.jsp?tab=features&pathtype=purchase&sku=3CR17571-91

or the Catalyst 3560-24TS , ~$1600
http://www.cisco.com/en/US/products/hw/switches/ps5528/index.html

Why would I choose one over the other?

Thanks.
 

Answer:Why Cisco switch over 3com switch

I would go with the Cisco because I have seen more random lock up issues on 3com gear than I can count.
 

23 more replies
Relevance 34.44%

I understand that a hub is more like a party line, where all devices hear and read data before sending it to next port, and a switch is advanced hub. But, what is a router. I know what a wireless router is, but they say a router is more advanced than a switch. Can you buy a non-wireless router?

Also, can you connect 2 switches together? So, Modem-----to Switch----to Switch----Computer

And both switches have other devices connected?

Answer:Hub vs Switch vs Router/ 2 Switch Story

you CAN buy a non-wireless router--but--the two I found on Amazon were only 10/100 (most modern systems use gigabit ethernet 10/100/1000) but wired are generally cheaper than a wireless router(the Cisco below is NOT cheap)--however--it's not necessary to use the wireless part of the wireless router as most have at least 4 ports (wired).

Yes you can connect switches together but they won't allow for multiple computers to connect to the Internet (at least not easily nor in a way that makes sense).

What devices are you trying to connect together?

wired routers:
Amazon.com: TRENDnet 4-Port Broadband Router TW100-S4W1CA (Black): Electronics

Amazon.com: Cisco-Linksys EtherFast Cable/DSL Router with 4-Port 10/100 Switch: Electronics

4 more replies
Relevance 34.44%

What is the difference between a workgroup switch and just a simple switch?

I'd assumed it was just a naming thing but then I saw a 5-port switch and 5-port workgroup switch from the same company so...
 

Answer:workgroup switch vs. plain switch

A switch is pretty much the same as anyother switch, now perhaps one was labeled a hub? A hub is a "dumb" device that sends any packets that come in to all ports on the device, where a switch "smart" device will route it to the proper ethernet port. But also by workgroup they may mean the device is designed to be stacked with other similar devices, ie have some sort of groove or special stacking method.
 

3 more replies
Relevance 34.44%

I recently bought a wireless routerProblem is every time I switch laptop to wireless the BSOD appearsI have a novatech notebook(quite old), running xp professional and it has worked wirelessly in the pastSorry I have no further details about the BSOD but just wondering if the laptop has given up the ghost completely(really hope not!)Anyone else had the same problem or can give any clue as to what it could beregardsto ya

Answer:when I switch wireless switch on I get BSOD

We need to know the STOP code error message that appears on the blue screen.

3 more replies
Relevance 34.44%

Could I use the reset switch to turn on my comp instead of the power since I destroyed it?
 

Answer:Reset Switch <--> Power Switch

Yes, this should be very easy. All you have to do is switch the arround on your motherboard.
 

2 more replies
Relevance 34.44%

In another thread I recently posted, some people recommended I buy a 10/100 switch with 2 gig-ports. Should I just buy an all gig-port switch, or is there a difference???
 

Answer:10/100 Switch with 2-gig ports vs All gig-port switch

What's the application?

Is it just for your house?
 

3 more replies
Relevance 34.03%

Please can someone give me EASY CLEAR instructions how to get rid of this data miner..i am running windows xp and bullseye used to just open a web page..numerous times...however now opens a small window on every page I open as a layer over the web page i am trying to view..please adivse thank you,,,,

Answer:Bullseye..getting worse

click here

2 more replies
Relevance 34.03%
Question: Worse Virus EVER!

I am running Vista on my HP Pavilion e9150t and got a bad virus. I logged onto my computer and all my picture files are there and I can access them, however, when I go to save them onto thumb drive etc. everything is shut down. My internet is wiped out, as well as my Dvd drive. It will not let me open or send anything to my thumb drive, external hard drive or bluetooth. I can still use my camera cards though.

My Avast has been shut down and so has my security center. It wiped out Spybot and hackthis, Malebytes still scans (unsuccessfully). It will not let me boot in Safe Mode of any find. Firewall is shut down too.

This is one of the several error messages I get. "the dependency service or group failed to start"

I back-up my files once a month, but have about 100 pictures that have not been backed up and I have to try to save them. Please help!
UPDATE: Malware bytes completed a scan and this time found 2. They are Malware.Generic (file) and Disabled.Cryptsvc (Registry Data)
 

Answer:Worse Virus EVER!

You'd be best posting this under the Security & HJT section mate. Use "Report" at the bottom of your message and somebody will move it for you.
 

2 more replies
Relevance 34.03%

is there an easy way to stop these pop ups invading my computer every time i go on to amazon to look for something, windows 7

Answer:pop ups getting worse from amazon

Have you enabled the inbuilt PopUP blocker in your Browser? and do you have an additional AdBlocker for your browser?

3 more replies
Relevance 34.03%

I pretty much summed it up in the questionnaire. I'm trying to save my dad's notebook from layers and layers of browse hijackers, adwares and maybe something even worse, I don't know.

Hopefully you guys can show me the right tools and instructions for the job.
Thank you in advance!
 

More replies
Relevance 34.03%

My desktop has slowed down substantially and occasionally freezes all apps. Even after checking for malware and running a registry cleaner, nothing appears to be a problem.

Anything further to suggest?


Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A4-3420 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 2
RAM: 7666 Mb
Graphics Card: AMD Radeon HD 6410D Graphics, 512 Mb
Hard Drives: C: Total - 936682 MB, Free - 794298 MB; D: Total - 17083 MB, Free - 2095 MB; F: Total - 1907599 MB, Free - 733989 MB; I: Total - 3815413 MB, Free - 1578731 MB;
Motherboard: PEGATRON CORPORATION, 2ACF
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

Answer:Sluggishness & Worse

Motherboard: PEGATRON CORPORATION, 2ACF

Hard Drives: C: Total - 936682 MB, Free - 794298 MB; D: Total - 17083 MB, Free - 2095 MB; F: Total - 1907599 MB, Free - 733989 MB; I: Total - 3815413 MB, Free - 1578731 MB;Click to expand...

You appear to have a HP/Compaq brand desktop and appear to have 2 TB and 4 TB external hard drives connected to it.

What's the model name and model number of that desktop?

---------------------------------------------------------

Go here, then click the large blue "Download Now @ Bleeping Computer" button to download and save AdwCleaner.exe to your desktop.

Close all open windows first, then double-click AdwCleaner.exe to load its main window.

Click the "Scan" button, then allow the scanning process to finish.
(Note: There may be several seconds delay before the progress bar appears, so be patient.)

Click the "Report" button.

When the log appears, save it.

Return here to your thread, then copy-and-paste the ENTIRE log here.

---------------------------------------------------------
 

3 more replies
Relevance 34.03%

Well this all happened after I accidentally clicked a "you have won a million dollars" pop up in the middle of a site. Every minute now my computer is getting worse and worse, Half of my desktop is filled with random programs now and more just keep coming. I've tried symantec antivirus, spybot S&D, and adaware, and nothing is working. I have been keeping up on windows updates as well so I can't imagine how things have gotten so screwed up in fifteen minutes. As a last resort I ran hijackthis and saved the log. Hopefully someone here can help me. Adaware will delete 220 objects then ill run it immediately after and 300 objects will be infected. I have no idea what's going on and I'm about to scream. Here's the log:

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Intel\ASF Agent\ASFAgent.exe
C:\PROGRA~1\SYMANT~1\SYMANT~1\DefWatch.exe
C:\Program Files\Dell\OpenManage\Client\Iap.exe
C:\WINDOWS\system32\cba\pds.exe
C:\PROGRA~1\Iomega\System32\AppServices.exe
C:\PROGRA~1\SYMANT~1\SYMANT~1\Rtvscan.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\Program Files\Iomega\AutoDisk\ADService.exe
C:\WINDOWS\system32\cba\xfr.exe
C:\WINDOWS\system32\MsgSys.EXE
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\qpexgy.exe
C:\PROGRA~1... Read more

Answer:I've tried EVerything and my computer is only getting worse.

16 more replies