Computer Support Forum

Make an 'internal' hard-drive 'external'

Question: Make an 'internal' hard-drive 'external'

I brought a new maxtor 120gb internal hard-drive for my pc. However, I want to connect it externally through usb/serial either as a master or a slave (I don't mind as I have operating systems installed on my original hard-drive and on this new one so I can run from either).

I am sure that I saw the conversion cables somewhere before but I cannot find anything or anywhere to buy it on the net. It would be great if anyone knew what I was talking about and pointed me to a site where I could find something. Thanks.

(by the way the internal hard-drive that I want to connect externally is a normal desktop hard-drive. A similar pic is below)

Relevance 100%
Preferred Solution: Make an 'internal' hard-drive 'external'

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Make an 'internal' hard-drive 'external'

Just buy an enclosure.

http://www.newegg.com/Product/Produc...82E16817146255

Is your hard drive SATA or IDE? The one I linked you is SATA.

9 more replies
Relevance 99.22%

I have been wanting to get an external hard drive to back up data for both my desktop and my wife's laptop, but they're just so doggone expensive. A friend told me that I can buy an internal hard drive with some sort of a case, get a PCI card with an external SATA hookup, and I'm good. I figure this would be cheaper (and a smaller profile to boot). I've already got Acronis True Image so I don't need any backup software. What do I need to look for when I'm shopping for stuff? I'm looking for at least 300 GB
 

Answer:Can I make an INTERNAL hard drive EXTERNAL?

Yeah just buy an external HD enclosure and bingo instant portable HD. Most of them use PATA IDE HDs and USB to connect to a PC.
 

6 more replies
Relevance 93.89%

I have an internal hard disk not in use ,and I would like to make it as external disk !
I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .
So is there another way ? like usb -esata cable ?

Answer:how to make your internal hard drive into and external hard drive ?

Firstly, where are you based (Which country)? I would get the part of the internet, I trust we are talking about a 3.5" drive? Do you have an esata port on your pc? I would get something similar to this, I think: Play.com - Buy CiT 35M17SEF 3.5 inch SATA / USB / Firewire / eSATA External Hard Drive Enclosure online at Play.com and read reviews. Free delivery to UK and Europe!

3 more replies
Relevance 79.95%

Hello I am wanting to buy a 500gb hard drive to back up my 320gb which is nearly full.Sata 3.5 inch. Is there a differnce between manufacturers? For example: I would not buy an unbranded tv but i may consider a Sony if the price was reasonable. Which make do I go for and where is the best place that you have bought from?Thank you.

Answer:Internal hard drive- which make?

There are many reputable makes of HDDs and many good sources. Even the unbranded are often perfectly good and made by well known names.If you are happy with your existing HDD why note identify the manufacturer (Device Manager or Everest Home or similar) and Google for a 500GB version of that? You should get plenty of hits from names you know from this site, adverts, etc.What one person thinks is a good manufacturer and source may be a nightmare for another.

6 more replies
Relevance 79.13%

I see it can be done from an installed to an external, but can it be done in reverse, taking the external cased hard drive and cloning it to an internal? The old hard drive is from an xp laptop, and I can aquire another xp laptop if I can clone this way. Perhaps if I set the enclosure hard drive as master? All ideas are greatly appreciated. Many thanks
 

Answer:Clone a laptop hard drive from an external case to an internal hard drive

6 more replies
Relevance 77.9%

I recently formatted my c drive and now i am reinstalling all the software. I keep all the setups of software in my external hard drive. For installing the software I coy the setup folder of the required software on my laptop, then install it.

Is straightaway installing the software by accessing the external hard drive okay? Does it make any difference in the installation time or any reduction in life of hard disk performance.

Or should I always install through my laptop hard drive?

I am running windows 8.1 pro

Answer:installation software from external hard drive or internal hard drive

Your method is as good as any. If it works, keep doing it.

1 more replies
Relevance 77.08%

Has anyone ever opened up a External Hard Drive and installed it as a Internal Drive? I ask because my computer (HP s3700f) dosen't have the space for a second hard drive and I'l like to replace the 320 Gig with a 1.5 Tb I have.ThanksJohn

Answer:External to Internal Hard Drive

Yes...it will work.But to do it properly even if there isn't enough space would be to create a Clone image of your drive...and then clone it to the new one.Course you'll need to borrow another external since yours is going in the PC.

7 more replies
Relevance 77.08%

I recently replaced my internal hard drive on my laptop. Is there any way that I can see what is on my old hard drive or use my old hard drive as an external one instead of an internal one? Can I purchase an external hard drive case and do it that way?
 

Answer:Internal to External Hard drive??

Yes, all you need is a 2.5" external USB case.

Quite cheap and very useful.
http://insidecomputer.stores.yahoo.net/2usb20alhadr.html
 

3 more replies
Relevance 77.08%

I was wondering if there was anyway i could use my old hard drive from my desktop as an external drive for my laptop. Any help would be greatly appreciated. Thanks.Keep in mind that i am not computer literate.

Answer:Internal Hard Drive as External?

Welcome to Computerhope anotherJeff.Use a external USB enclosure.http://www.newegg.com/Product/Product.asp?Item=N82E16817609001

1 more replies
Relevance 77.08%

got an older compaq ipaq intel pentium III computer w/ 256 mb, 8455 mb hard drive & only 1.1 gb free space on c drive.  so i gotta have more space & am thinking about buying one of following external hard drives on sale: 1)Maxtor Shared Storage Drive w/ 200 gb for $93 or 2) a Maxtor Basics Personal Storage 3200 w/ 200 gb for $80, or see if I can remove the Seagate internal hard drive & install a larger hd. anyone know if this computer is capable of running a newer faster internal hard drive or would i be better off adding 1 of the 2 external hard drives?  also i read one gent's horror story about downloading maxtor's cd at:http://www.computerhope.com/cgi-bin/yabb/YaBB.cgi?num=1166019659/7#7would the maxtor external hard drive work ok w/out downloading their cd?  thanks all & merry christmas!

Answer:internal vs external hard drive

dede...If you plan on keeping this computer, you'd probably want to install a larger internal drive.  It just depends on how confident you are with your computer abilities.  Are you replacing the old drive and reinstalling the OS or are you JUST looking for more space?  If it's the latter, then you just might want to purchase an external drive.  They're easy to install and can be switched between other computers relatively easy.As far as installing Maxtor's Backup utilities, that should be optional.  The only thing needed to make the external drive function is the driver.Merry Christmas!

14 more replies
Relevance 77.08%

I have a seagate ide 120gb hard drive from my old computer that I am tempted to use as a USB external drive on my main computer.I have read numerous reports on these caddy's/enclosures/external disk cases. My question. Is it really as easy as placing this drive in one of these, attaching the cables and pluging this into a USB port on my box. I run XP home/SP2. Will this be recognised as an external storage device that I can immediately reformat?thanks in advance

Answer:Using an Internal Hard Drive as USB External

Hi alljust noticed a similar question to mine earlier in the thread, so I have my answer!

1 more replies
Relevance 77.08%

Hi,

I want to increase my storage space and I was thinking of going for either an internal or external hard drive. I was thinking of getting 250GB for my desktop, but i've noticed you can get 500GB or 1TB or a few bucks more, so might as well get a bigger one? But then comes the question as to how long these would last? Is it a one time investment or 3 years down the lane it would stop working?

Also, I'm not sure how the Ext HD works. For example, can I install a PC game on the Ext Hard drive and then play it from there? Or that will not work? I know I can download stuff to it, but can I actually use the Ext HD to run programs, like DVDs, music or most importantly video games.

The one i'm interested in transfers data at about 400MBps through the USB @ 7200 RPM. Not sure i that makes a difference....

Would really appreciate your help here!

Regards,

S
 

Answer:Internal vs External Hard Drive.

Hi there,

Well from my own personal experience I've found my internal hard drive to be much more reliable than the external, although I did carry the external hard drive around a lot so it might have become a bit battered etc. lol.

Anyway, I very much doubt you'll be able to play something like a game although you wouldn't have any problems using video files from the external hard drive. The main problem you'll have with games is that because of the amount of information having to be accessed and because you'll most likely be connecting the external drive to a USB port or at best, a FireWire port, you'll notice performance issues and the hard drive just won't be able to keep up with your computer's requests because of the slow transfer rate.

Cheers,

Andrew.
 

3 more replies
Relevance 77.08%

Is there anyway to make an internal hard drive an external USB one?
 

Answer:External & Internal Hard Drive

Yup just buy an external hard drive enclosure. Drive mounts in the enclosure that provides power and usually has a fan built in. Something like this. Lots to choose from. Just get the ones for USB input. Enclosure has its own power supply and plugs into 115 VAC or whatever the normal power is.

http://www.tigerdirect.com/applications/category/category_slc.asp?CatId=1204
 

3 more replies
Relevance 77.08%

I have a Sata 160 gig hard drive which is partioned 50/50 NTFS/FAT. The C: drive is used for applications and everyday stuff and the D: drive is used for storage of music files, photos, videos etc. this is rapidly filling up and I'm thinking of another larger drive for storage purposes only. Which would be better an external plug in or an internal one? bearing in mind I've only ever fitted memory modules and replaced a cd burner drive with a dvd drive in an older PC, would an internal one be hard to fit? would it have to have an operating system on it? or do you thing a portable device might be better?Also need to think about cost as wellThanks

Answer:Internal or External Hard Drive?

External deffo! You usually just plug in and it will play. You can also take it with you or keep it away from the computer and PCW are flogging a 500gB ONE FOR £80...click here=

8 more replies
Relevance 77.08%

Is there anyway I could use a old internal hard drive as a external hardrive

Answer:External/Internal hard drive

click here for very reasonable caddy's then should be ok.johnny.

2 more replies
Relevance 77.08%

My brother has PC with with a couple 2-3 hundred gigs. He is already running out of space on his computer, as he is a gamer, but only has two games. I've tried to delete a bunch of unneeded files, but that didn't work. Our dad then got him an one terabyte external hard drive. At this moment, I'm trying to figure out how to use it to get more space on his computer. This is my first time on this site after I looked through the interwebs to find nothing of use. Is there a way to make an external hard drive look external to the computer (run with male USB) or at least use it for extra space?
 

Answer:Using external Hard drive as internal

Not sure what you mean by your question. But when you plug in any external drive, Windows will recognize it as a hard drive and assign a drive letter to it. You can then use it like any normal internal drive.

Where things get dicey is if you intend to install programs or have programs point to this drive for basic execution. You can run into a situation where if you use different external drives that there will be a "pointer" issue. But if this is the only external drive you'll use, then it shouldn't present a problem.
 

1 more replies
Relevance 77.08%

Does anyone know a kit where I can make my internal hard drive change to a external one i.e. a case where I can put it in....

Would a USB2 be better than serial? or which is the best for this sort of application?

Answer:internal hard drive -> external

http://www.newegg.com/app/ViewProduc...146-034&depa=0

do you mean that?

5 more replies
Relevance 76.67%

I bought a larger Gig USB external drive to copy all of my files onto in case of a problem with my windows XP Pro Drive and when I try to copy or paste it over to the external drive it gets to some files and says it can not copy because they are in use and nothing is running at the time I am trying to copy everything off my computer to the external hard drive. Is there another way to do this without having to buy a program I can not afford to do on social security?

Answer:copy internal hard drive to external hard dri

What are you trying to copy, the entire HDD contents? What would be the point of that? You can't run Windows or any programs from the external drive using the copy/paste method & you can't copy windows files that are in use. If you want to create an entire backup of your system, there's plenty of free software available for just that purpose. We need an better explanation of what it is you want to do.

2 more replies
Relevance 76.26%

I have a 2TB Western Digital My Book Essentials, it's filled with tons of old photos, movies, docs, games, and I'm scared to think of what else. The SATA to USB connector broke on it, so I took the drive apart and put it inside my computer. I opened up device manager because it wasn't showing up automatically and the 2TB is showing up as unallocated, I'm freaking out now because I'm scared the data was somehow deleted.

What do I do?

edit: I realize also this isn't directly related to Windows 8 (besides the fact it's the OS I'm on), but I don't know where else to post it. I'd also like to say that I had a really deep feeling the drive was going to break continually for about two weeks before it happened, so if you have a similar feeling about something, don't ignore it!

Answer:External hard drive shell broke, salvaged internal drive

As long as your hard disk is still spinning & recognized by Windows, the data in your hard disk is still there, just the File Allocation Table got corrupted, You'll have a good chance to recover your data. What you need is a data recovery program, I use this program in the past:

Data Recovery Software Products - Runtime Software Products

In the mean time, leave this hard disk alone, do not initialize or format it when Windows offers to do so.

32 more replies
Relevance 76.26%

Is it possible to have pre-installed vista on your internal drive then buy a new external drive, install XP on it and then boot that drive to use XP?
 

Answer:Running Xp on an external hard drive with Vista installed on internal drive.

Yes this is possible as long as your BIOS supports booting from USB.
 

1 more replies
Relevance 75.85%

Well heres the deal, I have a WD200JB internal hard drive that I've recently put into an external case to run. The problem is i've only been able to register it for 31GB when its supposed to be 200GB, I'm running XP I've got the newest SP and updates all around, even when i use the Data Lifeguard that came with the hard drive it doesn't pick up on it being more then 31GB. What's the deal on that? Thats about all I can say for now i'm quiet bewildered on what to do, I know computers all around but i'm just new to the external hard drive scene.
Any Help Thanks.

More replies
Relevance 75.85%

hello i have 4 hard disk on my pc 3 hhd and one ssd on ahci mode but the Windows 10 says internal hard drive is external why?

Answer:Windows 10 says internal hard drive is external.

Do you have hot plugging enabled in you BIOS?

0 more replies
Relevance 75.85%

Hello. Newb here. I recently took out the hard drive on my old computer and made it into an external hard drive after purchasing an enclosure for it. Plugging it in, I quicky found that I am unable to find files such as pictures, music, and videos.

Questions:

1. Does anyone know why this would be?
2. If I reconnect HD to old computer, is it safe to assume that files will reappear?

Thank you in advance for any feedback.
 

Answer:Internal to external hard drive issue(s)

6 more replies
Relevance 75.85%

I have one PC (2100MHz Pentium IV)running xp and another networked (333Mhz Pentium III)running 98SE. I am looking to add an extra hard disk for backups (around 200GB is the size/price limit)Am I better off using an external USB drive or should I use an internal one in the 98SE model. This is currently only used to give permanent access to the Compleat Oxford Dictionary and a couple of other CD based applications.

Answer:External v internal hard drive for back up

bump

4 more replies
Relevance 75.85%

How can i use my old internal Pc hard drive as an external usb
storage device
 

More replies
Relevance 75.85%

I am thinking of buying an external hard drive but was wondering how it compares with an internal one on performance

Answer:internal vers external hard drive

Ext - Speed limited to the USB2 speedInt - Can go bang with power supply Unit then you lose any backups on drive with it.

1 more replies
Relevance 75.85%

hello i have 4 hard disk on my pc 3 hhd and one ssd on ahci mode but the Windows 10 says internal hard drive is external why?

Answer:Windows 10 says internal hard drive is external.

Do you have hot plugging enabled in you BIOS?

more replies
Relevance 75.85%

So here's what happened. I've decided to make my 1TB WD external HDD to an internal one, I connected it internally using SATA, booted up Windows, and found it wasn't displayed in my computer.

I tried to assign a drive letter and initialize it, make it active but it stays at a RAW format.

Tried partition recovery wizard but I'm not sure what to recover. When I double click the first in the list, it doesn't bring up anything. I can only double click with the ones with label - see screenshots.

No, I haven't click format the drive yet.

More replies
Relevance 75.85%

I am new to this site so forgive me for not searching for my answer before posing the problem.

A month ago my five year old Dell running ceased Windows XP SP3 ceased booting. I ended up buying a new machine, Dell running Windows 7. Since the old machine will not boot, I have connected the old hard drive to the new machine because I need many of the files saved there. The problem seems to be entering the hard drive with access as if it were the primary source (Windows XP login and administrator PW). The new machine does recognize the drive and all the files however due to "security restrictions" I can not even view a photo from the old drive.

Is there a way I can access the old drive's files? Ideally, I would like to even to be able to access my email accounts from the old drive so I can transfer files which had been "saved to this machine" so I can transfer them to the server and in turn save them to the new machine.

I am not sure if it is possible but if I were able to create a back door remote access (without being able to initiate it from the old computer) I think I may be able to get what I need and want - like my iTunes, photos, etc...

Any help will be much appreciated, thanks
 

Answer:Accessing an internal hard drive as if it is external.

You simply need to take ownership of the files, see here: http://www.blogsdna.com/2159/how-to...sions-to-access-files-folder-in-windows-7.htm
 

1 more replies
Relevance 75.85%

I have changed my system and have a Seagate 30Gbyte hard drive from my old computer. I thought I would be able to use it in the new machine as a backup device.My problem is that the old drive is connected to the m/b by a 'wide cable' and the new one via a totally different cable, much narrower. Not very technical I'm affraid.Is there a way that I can connect the old drive externally? Perhaps via a caddy and either parralel or usb?Any thoughts would be appreciated.Keith

Answer:can internal hard drive convert to external?

No problems at all. An external USB2/Firewire (whichever suits you - probably USB2 is marginally more straightforward) enclosure with an internal IDE interface will do you nicely. They're the commonest type and available just about "anywhere".

8 more replies
Relevance 75.85%

So here's what happened. I've decided to make my 1TB WD external HDD to an internal one, I connected it internally using SATA, booted up Windows, and found it wasn't displayed in my computer.

I tried to assign a drive letter and initialize it, make it active but it stays at a RAW format.

Tried partition recovery wizard but I'm not sure what to recover. When I double click the first in the list, it doesn't bring up anything. I can only double click with the ones with label - see screenshots.

No, I haven't click format the drive yet.

More replies
Relevance 75.85%

So here's what happened. I've decided to make my 1TB WD external HDD to aninternal one, I connected it internally using SATA, booted up Windows, and found it wasn't displayed in my computer.

I tried to assign a drive letter and initialize it, make it active but it stays at a RAW format.

Tried partition recovery wizard but I'm not sure what to recover. When I double click the first in the list, it doesn't bring up anything. I can only double click with the ones with label - see screenshots.

No, I haven't click format the drive yet.

Answer:RAW external hard drive after making it internal

If no data is on the drive, just format it. Same thing happened to my buddy. Plug in using USB cable, works fine, plug in computer, read RAW. Reformatting the drive was the only fix for us.

If important data is on it, you may want to hook it back up into the external casing and connect externally before doing this. Don't want to lose critical files.

1 more replies
Relevance 75.85%

So here's what happened. I've decided to make my 1TB WD external HDD to aninternal one, I connected it internally using SATA, booted up Windows, and found it wasn't displayed in my computer.

I tried to assign a drive letter and initialize it, make it active but it stays at a RAW format.

Tried partition recovery wizard but I'm not sure what to recover. When I double click the first in the list, it doesn't bring up anything. I can only double click with the ones with label - see screenshots.

No, I haven't click format the drive yet.

More replies
Relevance 75.85%

Is it possible to purchase an internal hard drive and an external hard drive enclosure and combine the two?

Answer:Internal/External hard Drive Question

Of course you can.

3 more replies
Relevance 75.85%

i just had an external hard drive die and i know, usually, the first to go is the circuit board in them so i took the drive out to see if it would work in my pc and either the drive is telling the pc it wants to boot from disc or vice versa but either way it won't let the pc start/boot up it's plugged in correct because i have a second working drive now i just unplugged that and put the drive in question there and sorry for not being very detailed i tried this a few weeks ago and don't remember the exact line it gave. the external is a maxtor one touch 3 500gb my system is xp pro service pack 3 intel celeron cpu 2.40ghz 224mb of ram.. Thanks for any input.
 

Answer:external hard drive died want to try it as internal.

What exactly are you trying to achieve? Just retrieving data?
I think your saying your hopeing it's the external box that died and not the drive itself?
You say you removed your second working drive? So you still have your first (boot drive) installed and the HD you think died?

Easiest thing I can think of is install a working drive in the external case. If it works the other drive is dead and the external case is fine.
 

1 more replies
Relevance 75.85%

I have several old hard drives. Is there an adpater available to convert the 4 pin internal power connector to an external source ?
I have an adapter for the interface but not the power.

More replies
Relevance 75.85%

I have several old hard drives. Is there an adpater available to convert the 4 pin internal power connector to an external source ?
I have an adapter for the interface but not the power.

More replies
Relevance 75.85%

I earlier posted about the Aspire AST690-UP925A having 250GB hard drive. I since then contacted Aspire chat support. Apparently, not being tech savy we didn't realize 250 gb hard drive only 112 c drive is able to be used, the d data drive holds the programs to run the computer.

I didn't mean can I use the external hard drive internally. I meant, if I hook it up externally would it work in place of the internal hard drive that is nearly full except for around 10 GB?

So, unfortunately the computer isn't as big as you believe. But...I wanted to know if I purchase (I was looking at western digital elements 2TB external hard drive). Can we use it for this computer. It will not run itunes or anything like that, but we can obviously go online.

My brother wants to buy a new computer, but I know that is probably not the way to go. Should we get an internal hard drive installed and other memory or something or can we use the external hard drive?

I would appreciate any informed help on this since we do not no technical info on computers. Can't really afford to buy another computer right now.

Thanks in advance
 

Answer:Can external hard drive be used for full internal hard drive?

If you want to take out the drive from external hard drive case and install it in your desktop/laptop, then usually you can. Usually external hard drives are just ordinary hard drives accompanied by some extra controller to make it able to "talk" via general ports (e.g. USB). However I am not familiar with digital elements 2TB , so I can not confirm it. But I do have WD external drive, which I had positively confirm that its real drive is just ordinary hard drive.

Note that if you decide to do this, I suggest to find experience people to work on extracting the drive. If you do it yourself you will risk to damage it, and you don't want that since usually opening the closure means voiding the warranty.
 

2 more replies
Relevance 75.85%

Hi, for nearly a year now I've been using a Buffalo 500GB external hard drive.
Just yesterday though, after unplugging it from my PC, using it on another Windows 7 machine and then attempting to reconnect it the my PC, it began to show up on My Computer as a Local Disk rather than an external. In addition, when I try to access it, it gives me this message: E:\ is not accessible. The file or directory is corrupted and unreadable. My question is, is there any way to return the drive to it's original state or recover the data inside? The data is of extreme importance.
Thanks for any help.
 

More replies
Relevance 75.85%

I am unsure about what happens after you convert your internal hard drive to an external hard drive... Let's say the internal HDD was your only laptop HDD and you replaced it with a SSD. If you convert your old internal HDD to an external HDD, what would happen when you open it up on your newly installed OS (on the SSD)?

I am trying to download a new OS but us my old internal HDD as an external drive just to access specific files. However, I don't want any other data/programs/settings/etc. downloaded onto my new SSD. Do I need to delete my old OS when I convert my old internal HDD into an external HDD or does the OS simply get "reduced" to a bunch of files that I will see on my newly installed OS?

If anyone is able to clarify these questions that would be fantastic!
 

Answer:What happens after you convert your internal hard drive to an external hard drive?

does the OS simply get "reduced" to a bunch of files that I will see on my newly installed OS?Click to expand...

Yes
it will just be seen as a data drive and you would need to goto the directory for your data
it wont run as an OS at all
 

3 more replies
Relevance 75.85%

I had been using my Hitachi 320g external HD for 2yrs.It had not problem until yesterday I transfering some files from my Drive C to Hitachi HD when the computer hang.I unpluged the external HD and restart PC.When I pluged in the external HD again it was recognised as interrnal HD.I've problem accessing the files.The PC detected it was FAT32 since my system was NTFS and asked me to reformat my external HD.I tried connect to other PC but no different.
 

More replies
Relevance 75.85%

I have an HP dv6810us. its 7200 rpm and only has 160 gigabytes of space. I just bought a Western Digital My Book Essential 2TB external hard drive, at 7200 rpm; model: WDBAAF0020HBK-NESN. I have put ALL my movies, documents, music, pictures, and everything other than my programs and stuff that came with my computer. I only have 20 gigabytes left on my computer i was wondering how i could somehow turn my external hard drive into my internal hard drive....and how. any websites of videos that could lead me to the right place would be very helpful. i have used 140 gigs of space on my computer mostly due to the sims 3 and programs. please help!

Answer:Making an external hard drive your internal hard drive

Hang on, so if I understand you correctly you've got a 160Gb drive installed in your laptop and it's only got 20Gb free space left. So now you want to put the 2TB drive into the laptop? Sorry, but that won't work. You'll need to buy another 2.5" drive.Is the drive inside your laptop SATA or IDE?

3 more replies
Relevance 75.85%

Hi guys,

I'm new on any sort of forums so go easy if it's a stupid question..but here goes.

Me and my brother built me a new computer from scratch (he did the building - i did the watching).

To cut a long story short - I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.

When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.

Does anyone know how I can get the internal drive to stop acting like an external drive?

Any help would be greatly appreciated.

Answer:Internal Hard Drive acting like an External Hard Drive

This is the way it works. I have an 80GB SSD and an internal HDD and the same happens if the file/folder is large enough. If you just copy a few MBs, you will not see the window with the green stripe running. But if e.g. you copy 500MBs, you will see it. It physically moves the data. That is different if you copy on the same volume from one folder to another. Then it only makes an entry in the MFT.

6 more replies
Relevance 75.03%

My sister's hard drive was going out, so i decided to buy her a new one. I also got an external enclosure to put the old one it. I installed the new one, and got windows to starting up, then I left. Well, she is now saying the 2.5" external enclosure will not fit her hard drive.

The hard drive in the enclosure is a hitachi 60gig, not sure of the model number. The hard drive in the computer is a 250gig that i bought from circuit city, where the enclosure is from also.

Are there special connections for this? It doesn't make sense that it would take a normal drive to replace the old one, but not be able to use a normal enclosure.
 

Answer:Toshiba Laptop internal hard drive being used as an external

Did you buy the correct enclosure to fit the drive?
Pata or Sata?
 

1 more replies
Relevance 75.03%

Hi

My brothers hard drive packed up after about 13 months and the computer store he bought the HP desktop only offers a 4 month quarantee. The literatuer from HP gives a 2 year guaruntee - but brother is too lazy to pursue it. He is also a computer ***.

I would like to know the pros and cons of external hard drives. We live in darkest africa and the stores here are not good at stocking the spares of items they sell.

Can anyone please advise? I am capable of instaliing an internal hard drive - but I cannot find one for his computer
 

Answer:Pros and cons of external or internal hard drive

I would say that internal HD are more reliable because you are eliminating the USB connection. If it is possible to install an internal drive I would definitely recommend that choice over an external.

Why are you having trouble finding an internal drive for that computer. What type is the original? IDE HD are getting harder to find these days but if it is an IDE drive any size IDE drive will work up to 500gb.
 

3 more replies
Relevance 75.03%

I've got an internal 200gb seagate hard drive that i'm putting into an enclosure and running it via usb. what location do I need to have that little jumper in if this is how you are looking at the drive if I just want to use it as extra storage? :

::::::::::::::::::: :::: ****

it is currently in the second position-> ::::

edit: do i need to format the drive, first?
 

Answer:Internal Hard Drive in External Enclosure Problems

12 more replies
Relevance 75.03%

I don't know if I'm going crazy or something, this is not the first time happened to me. For transferring large amount of data from a desktop to a laptop. (80GB - 100GB). I would usually pulled out the internal 2.5 HDD thru USB to the desktop and transfer the files directly. This is like the third times happening. I created a backup folder on the root of the external HDD and copied the files over. I took about an hour to do it. I didn't get an error messages of any kind for the whole process and safely removed the HDD after. As soon as I connected the HDD back to the laptop internally. All the files just disappeared. It happened twice on a Windows 8 HDD, and today I was a Windows 7 HDD. Anyone has the same experience, or have I gone cuckoo.

Answer:Missing files from external (internal) Hard Drive

Can you elaborate please? The partition and folder is there but files missing, or no partition either?

3 more replies
Relevance 75.03%

Hi all,

I have a simple question, and first off a disclosure, I haven't done any system imaging before.

If my purpose is to clone an internal HDD (Fujitsu 120 GB with about 80 GB used) on an old Compaq laptop to an external hard drive (WD Scorpio Black 320 GB), so that I can actually SWAP them when the need arises (ie. install the WD in the laptop), should I expect:
a) an exact copy of the internal drive, including OS, programs, data AND boot files?
b) the above to be done with either Acronis, as provided by WD, or Macrium Reflect?

Also, since I have extra space on the WD drive, should I use it as a plain back up of data as well on a separate partition, or restoring an image works best on one simple partition?

Now, here's the kicker, I read on this and other forums about perfect Image Creations, but definitely not perfect Image Recoveries! Is there a way to test it? Testing it, as in disabling the internal hard drive (thru BIOS?) and starting Windows from the external drive, is that possible? I think not

Thank you.

More replies
Relevance 75.03%

Hello all. I need some more space and I have a extra 1tb external hd. I want to turn my usb 3.0 external into a sata internal. Will this be the same performance as a regular internal drive with same specs(like if both are 7200rpm). Isn't it the same thing? Or external not made to be as good as internal drives?

Answer:External Usb 3.0 hard drive used as internal affect performance?

A hard drive will only run at a certain speed.

An external drive is used for storage, no reason for it to be super speedy.

If you want to take apart a perfectly good working external drive to gain a millisecond or 2 of speed, that is your choice.

USB 3.0 - Wikipedia, the free encyclopedia

Difference between SATA I, SATA II and SATA III

Need more space, just buy another hard drive for the pc.

8 more replies
Relevance 75.03%

I have a hard drive enclosure that was made by Sabrent that is currently not in use. I purchased it earlier this year from Amazon.com (See http://www.amazon.com/gp/product/B001PHLMAE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 [Date accessed: 03-14-2015 @ 7:36 PM]). I have a 4TB SATA Internal Hard drive that is currently not in use. I purchased it earlier this year from Amazon.com (See http://www.amazon.com/dp/B00LO3KMK0 [Date accessed: 03-14-2015 @ 7:38 PM]). My question to you is will this SATA Hard Drive, inside the hard drive enclosure, work with my Windows XP Operating system. I also have a 2 TB Hard Driving made by Western Digital somewhere in my house.

Please keep in mind that my motherboard model number is NF4UL-A9. I purchased it from this website earlier this year:

Biostar NF4UL-A9 Socket 939, AMD Motherboard
http://www.ebay.com/itm/331243140431?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
(Date accessed: 01-27-2015 @ 11:52 AM)
(Search engine used: Ebay.com)

The motherboard above was made on or around 2004. I have 4GB (however, it only shows 3.2 GB because it is 32-bit) of RAM installed on that motherboard.

In general, I have two computers. I have the NF4UL-A9 desktop. In addition, I have a HP Pavillion Laptop (Model Number dv7-6b32us) that I purchased in December 2011. It has Windows 7 Ultimate Operating System.
 

Answer:Will a 4 TB Internal/External hard Drive work with Windows XP?

7 more replies
Relevance 74.62%

Hi all,

Basic summary - I put together a home theater PC (HTPC) a few months ago, the internal hard drive started out ok, then started clicking with long load times, now the PC will only turn on (no image to monitor) and loud hard drive clicking. However, when I moved hard drive to external enclosure, hard drive clicked for 15 minutes, and is now silent. What's going on?

Sys Info for Helpful Laptop - (running Windows 7 Home Premium 32 bit) (note - this is for the laptop I'm connecting the external hard drive via USB to, NOT the PC that the hard drive was in)
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3002 Mb
Graphics Card: ATI Mobility Radeon HD 3400 Series , 256 Mb
Hard Drives: C: Total - 141124 MB, Free - 22170 MB; F: Total - 715301 MB, Free - 537492 MB; G: Total - 99 MB, Free - 71 MB; Q: Total - 9999 MB, Free - 3228 MB; S: Total - 1499 MB, Free - 616 MB;
Motherboard: LENOVO, 2764CTO, Not Available, VF29T9693B3
Antivirus: AntiVir Desktop, Updated and Enabled

Sys Info for Problematic Desktop (running Windows 7 Home Premium 32 bit)
Antec MicroFusion Remote 350 Micro ATX Media Center / HTPC Case
ASUS M4A78L-M AM3/AM2+/AM2 AMD 760G HDMI Micro ATX AMD Motherboard
Athlon II X2 240 AM3 2.8GHZ 2MB 45NM 65W 4000MHZ Pib
Sapphire Radeon HD 5570 - 1 GB DDR3 HDMI/DVI-I/VGA PCI-Expre... Read more

Answer:Seagate internal hard drive clicks when in PC, but not when in external enclosure?

7 more replies
Relevance 74.62%

Hello! I have an internal WD 750GB "green" SATA hard drive. I took the hard drive out of the computer and have put it into an external USB hard drive bay. However: when I plug the external hard drive bay into my laptop, windows recognizes the drive (including the correct model number) but says I need to format it before I can use it.

The drive is allocated a letter in "My computer", but if I try to enter the drive it asks whether I want to format.

The drive also appears in the Device Manager (but with no partition shown). I can click on a "populate" button and it then shows a partition with the correct volume size but this doesn't solve the problem.

I've also checked the disk by going Control Panel -> Administrative Tools -> Computer Management -> Disk Management and it shows the drive as being a "RAW" partition which is not correct.

I am running Windows XP but I also get similar problems when I check on a different laptop with Windows 7.

I've tried the external hard drive bay with 2 different drives and the same problem occurs so hopefully the drives themselves are OK (I can't check them in a different computer for now unfortunately). The drives appear to spin up OK.

I would prefer to avoid formatting the drive as it has data on it. I do have a copy of the data at home (in a different continent!) but would prefer to avoid waiting until I next go home.

Any idea what the problem could be? I wonder ... Read more

More replies
Relevance 74.62%

i have a seagate 7200.8 250 Gbyte internal harddrive pluged into a RocketFish USB 2.0 Hard Drive enclosure. I'm Running Windows Vista Home Premium on my toshiba notebook and when ihook up the enclosure into my laptop it makes the noise that it finds the enclosure but nothing comes up in My Computer to get into the te hard drive. the hard drive was bought new and first put into a desktop with Windows XP, but itook the hard drive to BestBuy and when they pluged it into there computer there running Vista it worked fine. it wont work on mine can anybody tell me what might be the problem???
 

Answer:External, internal hard drive wont work on Vista

15 more replies
Relevance 74.62%

I have opened my external Western Digital Hard drive and have installed it SATA to my pc, It appears in the bios but not my computer....how do i sort this? i have downloaded a pc utility from WD and its approved that the HD is working correctly.

Answer:External Hard Drive to Internal......Appears in BIOS but not my Computer?

You need to partition it and format it for it to be shown in My Computer. If Windows 7 go to Computer
Right Click then click on Manage
Click 'Disk Management'
You should see your drive. It will probably say unallocated .
Right click on the unallocated drive, and choose 'New Simple Volume'
Choose what format you want it and let it format.

2 more replies
Relevance 74.62%

I have been looking for a 2TB portable external hard drive with USB 3.0 or equivalent. I'm now thinking seriously about getting a WD:
http://www.tigerdirect.com/applicati...023&CatId=4227

I'm hearing on other threads that external drives are not built for continuous use (cooling has been mentioned as an issue) and that one needs to go the more expensive route of an internal hard drive in a separately purchased enclosure.

I would prefer having a secondary hard drive running concurrently with my computer. I know cooling devices are available for the internal HDD + enclosure combinations. Are they available for external hard drives?

I intend to have online backup to supplement hardware backup.

Comments on this dispute?

Present :Windows XP
Home Edition
Version 2002
32-bit
Service Pack 3

Dell DIMENSION DIM2400
Intel(R)
Pentium(R) 4 CPU 2.66GHz
x86 Family 15 Model 2 Stepping 9
2.05 GB of RAM
Graphics Card: Intel(R) 82845G/GL/GE/PE/GV
Graphics Controller, 64 Mb
Hard Drive Size 114.4GB
Free Space 37.2 GB
Motherboard: Dell Computer Corp., 0G1548
Antivirus : avast!

Intending to move as soon as I find one to a new laptop with state of the art home user processing, at least 1 TB hard drive, and at least 8 GB RAM.
 

Answer:Your view on backup with external hard drive vs. internal HDD in an enclosure?

16 more replies
Relevance 74.62%

Okay I built a new PC and I know The PC hard drive is most likely infected, and I want to get the data from its internal Drive D: moved to my new built PC. I also have a USB 2.0 External Enclosure with a seagate drive in it that has Microsoft XP on it as well I want to use as well. that particular drive. It was being used on old PC as well so it might have bugs.
 
I have had Malware bytes and Nortons for over 8 years installed on my pcs. (Yes I hold a Lifetime Malware-bytes subscription) and I need to keep the hidden pesky bug where its at. I just need the Data on D and to be able to use the External drive again. I don't want to hook them up and get a virus. Since the D drive is a Western digital Veloci Raptor Drive I wont fit in the Enclosure I got, so it will have to be hooked into the new PC SATA port and powered up for a short time. to move the 200GB of Data to a Brand New 500GB Samsung 850. Just need to make sure no bugs come along for the ride. (Teenage Son has been using it) He gets to keep have it after I'm done pulling data. 
 
New PC Build 
Asus Sabertooth 990fx R2.0 
8350 FX970 EvGa16GB/ 2 x 500GB SATA 850 SamsungCOSMOS II Cooler Master
 
 
 If I need to provide any more information please let me know, and thank you in advance. 

Answer:Need Help Preventing External and Internal Hard Drive Infecting New Build PC

Bee24:
to the Bleeping Computer Am I Infected? - What Do I Do? Forum. My name is Phil, and if you would permit, since we will be working together, I would like to address you by your first name, if that is alright with you.
I am sorry to hear of the issues you are having with your computer.  Let's see if I understand the issue that you seeking to resolve.  You have a new computer and an old computer.  You old computer has an external D: drive, which is a WD Velociraptor, and which you believe to be infected.  Why do you believe it is infected?
 
The external drive has 200 GB of data files that you want to transfer to the new computer?
 
You have some options, if the above is correct:
 
1. we try to clean up the external (and internal) drives of your old computer before you attempt the data transfer.
 
2. you could make a backup of your data files on your old computer and simply restore the data files to the new computer using a "clean" external drive, if you are sure that the data files themselves are not infected.
 
If you want to try option 1, then follow the instructions below, but only if I have understood the problem correctly.  If I am mistaken in my interpretation of your problem, please post back and provide precise details of the problem and where my interpretation is mistaken and wait for further instructions from me.
 
 
 
Assuming I have understood the problem correctly and you want to try option 1... Read more

17 more replies
Relevance 74.62%

I am trying to back up my hard drive to an external hard drive. I have a 4GB file on the internal hard drive which I am trying to move to the external hard drive. I have 227GB free on the external yet everytime i try to copy the file i get a message saying "cannot copy there is not enough free disk space delete one or more files to free disk space, and then try again. " it also gives me the option to do disk clean up. By doing this is shows to checkboxes one for recycle bin one for catalog files for the content indexer both are okb in size.

Can anybody tell me why I cant copy the file over when I have more then enough room?
 

Answer:Solved: copying from internal to external hard drive says not enough room when there is

14 more replies
Relevance 74.62%

I have been looking for a 2TB portable external hard drive with USB 3.0 or equivalent. I'm now thinking seriously about getting a WD:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1455023&CatId=4227

I'm hearing on other threads that external drives are not built for continuous use (cooling has been mentioned as an issue) and that one needs to go the more expensive route of an internal hard drive in a separately purchased enclosure.

I would prefer having a secondary hard drive running concurrently with my computer. I know cooling devices are available for the internal HDD + enclosure combinations. Are they available for external hard drives?

I intend to have online backup to supplement hardware backup.

Comments on this dispute?



Present :Windows XP
Home Edition
Version 2002
32-bit
Service Pack 3

Dell DIMENSION DIM2400
Intel(R)
Pentium(R) 4 CPU 2.66GHz
2.66 Ghz. 2.00 GB of RAM
Hard Drive Size 111.72 GB
Free Space 37.3 GB

Intending to move as soon as I find one to a new laptop with state of the art home user processing, at least 1 TB hard drive, and at least 8 GB RAM.
 

Answer:Your view on subject of external hard drive vs. internal HD in an enclosure?

Personally, I prefer buying a highly rated bare drive and placing it in a fan cooled enclosure - especially if it will be running for hours at a time.

The best internal drives (like WD Caviar Black or RE series) have a five year warranty, versus 1-2 years for pre-built external drives. To me, it's worth a few extra bucks versus taking chances on losing data due to an overheating drive.
 

3 more replies
Relevance 74.62%

My laptop just recently had the mobo fried, and I managed to salvage the hard drive. I bought an external enclosure and plugged it into another laptop to get the information I wanted off of it (music, etc). However, access is restricted to the hard drive. How can I access it?
 

More replies
Relevance 73.8%

I have a kaser 500GB external hard drive, i belive the enclosure is messed up because the transfer speed is only usb 1.1 speed and i've tried everything possable to change it. I was wondering if i could remove the case and just use the IDE drive as an internal drive? I want to try this first and if its not possible than i'll buy an enclosure.
 

Answer:External hard drive to internal IDE drive

Go ahead and do this... Make sure you pay attention to master/slave settings if IDE or the SATA connections if the drive is Serial ATA
 

8 more replies
Relevance 73.8%

I am having a problem with unwanted installations to external hard drive when it seems i have no control over where program or microsoft updates install. actually the worst problem was when windows live updates and installations went to external. i did not discover this until recently and this explained why i have had to reinstall vista several times. i can always unplug the external if necessary but i would rather not. i asked western digital why this happens and they told me that since my internal hard drive is smaller than external that vista seems to not have solved this installation glitch yet. i prefer to use my external as storage for files and backups etc. does anyone know how to make my system recognize main drive as the smaller one. i hope this is clear enough to merit an answer. i have already suffered through a 3 day phone help with tech finally telling me to reinstall vista, which i did and it solved several other problems but not the int/ext installation issues.
thank you
fran

Answer:programs and updates install to external hard drive instead of internal sata

I would recommend backing up your data to the external drive. Shutting down. Unplugging the external drive. Reinstalling Vista on a clean setup. Boot up with the DVD and remove the partitions from your internal drive. Shutting down. Turn on and install starting fresh.

2 more replies
Relevance 73.8%

Hello all. I have a technical background (hardware control systems), but am by no means a threat to any IT guy who actually understands DOS (Greek), or different OS platforms. In that regard, I will claim ignorance with a smidgen of knowledge---just so you know who you are dealing with and will correspondingly, dumb down your answers to my level (slightly smarter than a pile of rocks when it comes to absorbing this type of information).

I have a Dell GX630, 3.2 GHz computer with Windows XP Pro SP3 that is replacing my older 700MHz machine. I have painfully copied all programs, files, and added the peripheral hardware (printer, scanner, modems) to make this a duplicate replacement computer system with an addition monitor.

I have read all the posts for making a bootable flash drive (stick) and made both a Hirens bootable stick (three different sticks, Sandisk 4GB, Kingston 1 GB, and a generic 16GB) and a BartPE bootable CD disk?.my eyes bled, and the hammering base drum in my head has subsided. I?m Scotch/Irish/German with no desire to conquer the world, drink every Pub dry, and do it for little or no money, but I am stubborn, hard-headed, and tenacious to a fault.

My goal is to make a stand-a-lone Seagate FreeAgent USB (self powered) external drive, a working replacement "main drive (0)" for my computer with it?s own operating system
(XP Pro SP3). I used the Seagate software to clone the C SATA drive to this USB drive (NTFS). The reality is to have a cloned... Read more

Answer:Can you make an external USB hard drive, bootable and use as a Primary Drive

Hi

not sure what you are trying to acheive, from what ive read you cant get windows to boot from an exteranl usb hdd no matter what you do.

if its just for disaster recovery then do what i do.

you can ,make flash sticks bootable but i never could make a HDD bootable using windows, so i took the drive out of the enclosure and put it in my laptop, i booted from a win98 cd and fdisked and formatted the drive then sys'd it to make it bootable, i copied ghost onto it and wrote a small autoexec.bat file to set ghost running at boot up.

i then booted from it with it plugged into the laptop and ran a disk clone to a file onto the USB HDD.

when i want to restore it i just image the drive in from the USB HDD and im done.
 

5 more replies
Relevance 73.39%

I bought an external HD enclosure thinking I could put a spare 2.5" Hitachi DK23AA drive into it and have a handy 12 GB USB doodad to play with. I have the jumper placed correctly (according to Hitachi) to make it a slave and I can even see it in the device manager but not in "My Computer"...there is no drive assignment being made.

Does this sound familiar to anyone? Any ideas?


 

Answer:Trying to make an external hard drive work (USB)

If the device manager can see it, go into the Disk Manager (Computer Management, depending upon OS) and see if the drive is there (it probably won't have a drive letter assigned to it). If it is, right-click on the device and assign an unused drive letter to it. Should work from there... Can't give exact instructions without knowing which OS you're running.
 

3 more replies
Relevance 73.39%

Hello.

I'm trying to make an external hard drive bootable without losing any data that's already stored on it, if possible and use it to install Windows 7 on my computer, I'm currently running XP. Thanks!

Answer:trying to make an external hard drive bootable

What, no one knows how?

9 more replies
Relevance 73.39%

I need this problem solved because i need some few work moved to Vista computer... but it's 10GB and it's too big...

I have several HDD... I need to reduce some space in laptop
 

Answer:How can i make my hard drive 3.5" to external HDD

you can try to get an Enclosure for the Drive..

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1800603&Sku=ULT33051
 

2 more replies
Relevance 73.39%

Hello I'm going to add a SSD hard drive to the NB200 and was wondering what the G-sensor added to the dimensions of the hard drive that comes as standard? I wish to use the internal standard one as an external hard drive in an external case via usb.

Thanks for the info

Answer:G-sensor on hard drive - can I make the HD an external one?

My friend has an NB200 and I upgraded the HDD in it, and I believe the G-Sensor is not part of the HDD, and not added to the HDD. Its a component on the Mainboard so you wont be able to remove it from the system.

2 more replies
Relevance 73.39%

Just got a maxtor one touch 250gb hard drive,and its my first experience of an external drive.I`ve already noted that you can partition it,same as an internal drive,but after doing so,it it possible to make one of these partitions bootable??
I`ve got the drive for back ups,i`m planning on partitioning it 50 gig,os back up,and 200 gig data back up,it would be really handy if it was possible to copy over my current c drive onto the 50 gig partition[as this holds my operating system],and make this bootable,if the worst happens and my current set up goes tits up.I was planning on using Norton Ghost to make the backups,and the drive is both USB2 and firewire compliant,then if needed i could simply set the bios to boot from the external drive and all will not have been lost[seems like a good idea to me anyway!]
I`ve not asked anyone about this yet,and this seems to be the place to come for info on such a subject.
Many thanks in advance for any help,i`d really appreciate it!

 

Answer:Can you make an external hard drive bootable??

With that device, you may be able to clone your c drive using Maxtor's MaxBlast 3. If it did not come with the drive, you can download it from their site. I have a Maxtor one touch 300gb drive, and I believe that the one touch sofware itself will also let you make a clone of your bootable partition, but I'm not sure if you can actually boot from the one touch with that image.

Good Luck!
EBM
 

5 more replies
Relevance 73.39%

Just got a 500gb external hard drive and I have loaded most of my software onto it. However I want to keep all my music and pitires on itm biy if I click on the desctop icon it takes me to C drive and not M (THE EXTERNAL ONE)I want my documents etc set to my external driveMany Thanks in advanceIan

Answer:How do I make my external hard drive - default

click hereThis could be what you need

4 more replies
Relevance 72.57%

HiI have external HD and I would to know how to protect it from earse the data.(I need that the HD will be read only).I am using windows 7Regards

Answer:How to make external hard drive read only in windows 7

make external hard drive read only windows 7https://www.google.com.au/webhp?hl=...

3 more replies
Relevance 72.57%

I have windows 10 and i want to dual boot into windows 7, but i want to use my external hard drive as a local disk in windows 7Idk what i did but i went on command prompt and used diskpart and formatted my hard drive into ntfsAnd its taking so long to formatPls help

Answer:How to Make my external hard drive into a local disk

Windows will not boot from an external without a sledgehammer and a full day of tweaking so your wasting your time...

3 more replies
Relevance 72.57%

Hello I hope im not making a mistake here but would like to know
how can i install windows 7 using my external hard drive using this... How To make Bootable USB

without encountering this STOP: 0X0000007B

i mean i will use my external hard drive as bootable usb to install windows 7 on my netbook toshiba nb250 plz help

Answer:How can i make/install windows 7 using my external hard drive ?

   Information
We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.
& made the Startup Repair CD.
startup repair disc-create



Did you make the OEM manufacturer's Recovery Disks?

How to use Toshiba Recovery.
How to use the Toshiba HDD Recovery Utility

You can order Toshiba Recovery disks from here:
https://www.csd.toshiba.com/cgi-bin/...rification.jsp

9 more replies
Relevance 71.75%

This is probably a real basic question. I want to make an image of my hard drive using Macrium Free. The MBR is 100 MB and the primary drive is 471 GB. Do I need at least 471.1 GB of free space on the external drive for the image or does the imaging software compress the size so that a lesser amount of space is needed?

Answer:How much space is needed to make an image on an external hard drive

It will apx. 60% of the SPACE USED, not the total size of the partition.

i.e. If you USE 100 GB of the 471 GB, the image will be apx. 60 GB

1 more replies
Relevance 71.75%

This notebook has only 28 GB of disk space, and installed with Windows 10, only less than 10 GB free disk space is left. It cannot install Windows 10 update on Day 1, since I bought it. The error message says at least 10 GB of free disk space is required to install Windows 10 update. If I connect an external hard drive by USB port, how can I make it to serve as expanded hard disk space of the computer, so I can run Windows 10 update. Is any additional SW or system setup required?

More replies
Relevance 70.93%

My neighbour got an Kodack EasyShare M381 and I'm helping her with it. The computer is not recognizing the digital camera as an external source. The computer does beep when I plug in the usb and when I disconnected. (Camera is on of course) She is elderly and DOES not know how to use the Software that comes with it! The software does recognize the camera and can transferred the pics but...

I want to make it easy for her. I want it so she just plug in the camera with the usb and She clicks on My Computer and sees it there as an external hard drive so all she have to do is Click on it and sees her pictures there and just drag it out.

Thanks for your help!
ps. An card reader would be the last option, she don't want to mess around with the camera "insides" she get nervous and confuse about where to open the camera and how to take out the memory card (she's afraid to break it)
 

Answer:How 2 make computer recognize digital camera as external hard drive

11 more replies
Relevance 70.52%

Hi Everybody, I have had my T410s for 9 months and I love it. No problems at all. I was a contractor so I could use whatever laptop I wanted. Now I work for a big company that issued me a Thinkpad T410 with Windows XP. Now the T410 model has a huge heavy battery compared to the T410s. An ex-colleague of mine used to have a T60p with 2 internal Hard Drives one with Windows XP and one with Windows 7, and he could boot the computer with the Hard Drive of choice. Does anybody know how to do that? I already got the bay and the Windows XP Hard Drive inside the T410s. Thank you in advance Nicky

Answer:T410s with Windows 7 and additional internal Hard Drive with Windows XP. How do I make them work?

You hit F12 at boot and it allows you to select between HDD0 and HDD1. I'm pretty sure HDD0 is the internal, and HDD1 is the UltraBay. I'm certain you will have a fair bit of driver issues if the T410 and T410s have different hardware, especially on XP.

2 more replies
Relevance 70.11%

Hi Everyone,I have an spare internal hd that I would like to use as an external hd using usb1.Is this possble for me to do and where would i get the cables ect from?Thanks Beverley

Answer:make internal hd into an external hd

Easiest thing would be to get one of these click here(hope that works!)

3 more replies
Relevance 70.11%

Hey people,

So here's my issue, recently took out my laptop HDD and formatted it, NTFS format, and stored stuff on it. Now when I place that in an enclosure and want to use it as an external HDD drive, it doesnt pick up the device.

Through Diskpart I am able to give the drive a letter and access it, but when I "Safely" remove device, the Drive letters remain....

1St problem, Do I need to do anything special to make the Device a Plug and Play ?
2nd Question, am currently consulting google on the matter, HOW do I remove the Drive Letters that I assigned through Diskpart from "My Computer"

Answer:Make Internal HDD to External

Diskpart isn't the easiest way to do so, and I hope that didn't do anything to the drive. The easiest is to assign the drive a letter in Disk Management. But, to back up a bit, is it recognized in Disk Management, first.

1 more replies
Relevance 70.11%

I need help making my computer's ip's the same.
 

Answer:How to make internal and external ip's the same

Why would you be wanting to do this?
What is the nature of the external IP address? Is it a dynamic IP address - if so you'll have some considerable fun running to keep up!
A little more info wouldn't go amiss - nature of external IP address, type of router (NAT, not NAT)? And again, what is it that needs the two addresses to be the same?
 

3 more replies
Relevance 70.11%

I have a failing seagate 3TB HDD (am getting cycle redundancy errors) I would like to put in the PC as an internal WITHOUT losing any files. How would I go about that, as when I have done it before it has asked me to format drive.

Ending up fixing it, it got to 73% on chkdsk with a errors and stopped but I then did a /f and it fixed the problem.

Answer:Make an External HDD to Internal HDD

That drive does not sound good. I would not trust it.

2 more replies
Relevance 69.29%

Hi All,

Please can someone help.

I have a second HDD that - at the moment - is just sitting in my computer (not in any cradle or anything - as I have a Dell Dimension, and they don't like you adding extra bits to their systems) I am thinking of buying one of the HDD cases so that I can turn it into an External drive.

My question is:

I also have an Internal DVD writer, which - again being a Dell computer - I cannot install into my computer (as the drive is wider than the space to put it in the computer). Is it possible to get a case similar to the HDD one to turn it into an External drive (I would buy an External writer, but I haven't got the funds at the moment)

If anyone has any ideas or knows of somewhere I can buy one of these, please let me know.
 

Answer:Is it possible to make an Internal DVD writer, External?

9 more replies
Relevance 69.29%

I would like,if possible,to make my Freecom Classic series cd-burner into an internal one.Having been told some time ago that it will speed up the burning process,would it be possible please to fit the unit into my ATX case?If so,how do I go about it?There are spare bays available,also spare power plugs from my new PSU.I'm on 98SE,and have the installation floppy.Any ideas/suggestions welcomed please,I've got some work stuff to do tonight on my pc,so apologies for any delays in answering.

Answer:How can I make an external cd-writer into internal

Apart from doubting, depending on its construction, whether you can do what you require, a new internal CD rewriter is only around £10 to £12 these days and, even better, a DVD rewriter from £18 upwards for the very latest top brand name models.

5 more replies
Relevance 68.88%

Greetings,I need to make my Seagate Barracuda ST 380011A HDD into an external drive. It is currently a 'slave' on an old computer, want to use it as external drive on new computer. All of the 'enclosures' or 'cradles' I see are identified as being IDE, while the ST 380011A is identified as being ATA.Will any of these IDE 'enclosures' work with this drive? Is this drive what they call a 3.5 inch drive? I am specifically looking at http://www.amazon.com/CoolMax-HD-360B-U2-Aluminum-External-Enclosure/dp/B000BRWHMQ/ref=pd_bbs_2?ie=UTF8&s=electronics&qid=1203194839&sr=8-2will that enclosure work with the ST 380011A ?regards,stevenjs___________________________"I am but an egg."--Stranger in a Strange Land

Answer:Need to make internal HDD into external USB -- exactly what enclosure will work?

IDE/ATA are the same designation...any IDE enclosure will work.

1 more replies
Relevance 68.06%

I'm writing this post because this was asked so many times over, but nobody seems to have come up with a good answer. People suggested some trials of paid programs, but that's not really an everyman solution. I don't know on how many machines my workaround will work, depends on the audio chip.

I'm going to tell you how to do this in foobar2000. My system is Win7.

0) I think that this will work only if you see something like this in your Playback devices (right-click windows audio icon & select from menu to launch it):





So if the headphone output is not "Ready" when nothing is plugged into it, you will maybe be able to use the HDMI output if you feel adventurous, or for that matter any output that you have. You possibly have no idea why I'm talking about that, but this will be clear after reading through the rest of my little manual.

-------------------

1) download & install foobar2000 here: http://www.foobar2000.org/download
play around with it of you don't know the player.

2) download & install the latest ASIO4ALL here: http://www.asio4all.com/
leave all install options default.

3) download ASIO support for foobar2000: http://www.foobar2000.org/components/view/foo_out_asio
double-click it, fb2k will install it automatically.

4) go to foobar2000 file->preferences->output->asio. Check if asio4all is visible at the top list. You can use the x64 driver (requires foobar2000 restart)

5) Add a ne... Read more

Answer:Make your laptop internal & external speakers play together

Props to OP - I've found a somewhat related hassle-free solution for desktops with Realtek Audio.

In the settings, you can 'disable front jack detection'. Therefore, speakers connected to the rear panel won't stop when you plug something else in the front.
 

5 more replies
Relevance 67.24%

I currently have a pc that was windows 2000 that is now not working. I recently put a new hard drive into the pc and it currently store all my music (itunes) and document flies. I would like to if it is possible to take the hard drive out and connect it to my other computer externally. The only other issue is the other computer is running on vista. Is it possible to do this?
 

Answer:Can I make my internal HD external and I change the type of microsoft it runs with?

Yes, you can take that hard drive out of the 2k machine and read it just fine in Vista. What you can't do is take your OS drive from 2k and boot another machine with it, but I don't think that is what you were asking.
 

2 more replies
Relevance 65.19%

i HAD FORGOTEN THE WINDOWS PASSWORD and formated the hd from the blue button goig to install Linux soon so what the hell clean it up been a few years since I had used this brain box anyway start anew well didn't do any prior copies no back up now im stuck with out that hd option any good ideas i have copied pc doc master boot and some patch works thru this forum but noting seems to work booting sequence @ #1,cd #2ubs & hd last it had window 2000 in it... How can I get bios fixed??? any ideas out there???

Answer:r-50 1830 MISSING FOLDER (hard drive direct memory) +(internal network device)+(internal erthnet )

I read your message 3 times but still didnt get what are you trying to say.

6 more replies
Relevance 64.37%

I was going to go buy a external hd from BEst Buy or CompUSA, but everything I've read on here says it's cheper and just as good to build your own. Well, when it comes to that kind of stuff I'm basically clueless. What would I need to buy?

For the casing, if I get get a smaller 2.5 or 3.5 inch one would I be limiting the amount of gigs I could put in it?

Would I need to buy a specific type of hard drive for it to fit?

What else would I need?

Any help would be greatly appreciated. Thanks in advance!
 

Answer:Want to "make" an external hard drive

6 more replies
Relevance 63.55%

So my 1 TB internal hard drive has less than 30 GB of space and I want to upgrade to a 2 TB internal so I can hold more of my games on it. How would I be able to transfer every single thing from the 1 TB to the 2 TB?

Answer:Help Upgrading 1 TB Internal to 2 TB Internal Hard Drive

Assuming this is for a desktop, you would plug in the new HDD into the sata port on your motherboard, amd make sure it is getting power from the PSU, and win7 should recognize it and mount it. You then make sure its has the NTFS file system and you can drag and drop from one drive to the other. Or use a program to copy over files like teracopy. I use teracopy because it keeps exact listing of what is being copied and exact info about size. Now as far as transferring games, I may be wrong but I think you would have to reinstall the game into the larger drive if you wanted to make use of the 2tb drive. I am not a big gamer so take my game advice with a bit of salt, I am simply trying my best to help you out

6 more replies
Relevance 63.14%

Hi all,
 
I am attempting to install Win7 in an Inspiron 1545 with a new SATA hard drive that was purchased. When i insert the drive, I get "Internal Hard Disk Drive Not Found." I have verified the drive is not showing in the BIOS, I've already attempted to reseat the drive several times. In addition, I've attempted to load the chipset drivers, SATA drivers, etc from Dells website, the drive still does not show in the OS install when booting to DVD or in bios.
I dont believe it to be an issue with the new drive, as I plugged the new drive into another model Dell laptop and it recognizes the drive fine in BIOS, also I can still boot to the previous hard drive in this laptop without issue when i plug it back in.
Is there a specific driver, etc that I need to use for the drive to be recognized or other thoughts people have?

Answer:Inspiron 1545- replacing hard drive, new SATA drive not found "Internal Hard Disk Drive Not Found

This is strange - either the new hard drive has a rare compatibility issue with your onboard controller (I use a 500Gbyte in my 1545 without probs)) or it is a mechanical problem.I would take a close look at the physical dimensions and compare your original hdd with the new one.Watch the video (even though it's about a 1525 (similar to an 1545) and an SSD hdd) -  go to 2:20

10 more replies
Relevance 62.73%

I'm using windows 7 64 bit and have my hard drives set on AHCI, but all my internal drives have the, "Safely Remove Hardware and Eject Media" icon in the taskbar. How do I eliminate this?

Before the format I had my drives set on IDE and didn't have this problem....
 

Answer:Internal hard drives seen as external?

This is caused by the hotswap functionality that is native to AHCI. Typically, the drivers will mark your installed root partition (C as non-swappable. The integrated drivers with 7 do not do this. The solution is to upgrade to the latest storage drivers available on the manufacturer website for the motherboard.
 

1 more replies
Relevance 62.73%

I need to upgrade my hard drive (currently only have 8mb). As I am really new to all this upgrading malarky I was thinking about getting an external drive (just plug and play). Is it worth getting an external drive as an upgrade? WIll there be much difference in performance etc? Any other hints / tips / advice?
Thanks
Michelle
 

Answer:Internal v External Hard Drives

6 more replies
Relevance 62.73%

I have 3 hard drives on my computer. One hard drive named C is only used for my Win XP Pro SP3 operating system and nothing else. A second hard drive I use for all my data, video, files, folders etc. The third hard drive is used for the backup of all my data from the second drive.

I have been recommended by some people to use an external hard drive as I will have a problem if I have a computer crash. I can’t see the problem as I am assuming that my C drive only would be affected. The other 2 drives being almost a copy of each other. A crash wouldn’t affect these 2 drives.

My understanding of external hard drives is that they are only external because of the portability factor. The problem with external hard drive is usually misuse in handling and cooling. Drives used internally re often more reliable and often have better cooling.

The reason for this post I to ask do I have all my facts right.
 

Answer:Internal or external hard drives?

Depends on how safe you want to be. In case of a HDD failure, you are fairly safe. However, there are numerous other issues that could occur, such as a lightning strike or a faulty power supply which could affect one or all of the HDD's.
 

1 more replies