Computer Support Forum

Detecting Bad Ram?

Question: Detecting Bad Ram?

I'm not positive I have bad RAM but I rebuilt my computer and noticed a few problems. I didn't put back in my floppy drive so if the programs out there are required to boot I would need one that would work with a bootable cd. Anyways sometimes during Counterstrike or Halflife2 my game will just crash and I get some kinda memory error. I been trying to get Sims Online to work and it just completely freezes while loading. Someone said it could be my memory latency but i'm not sure how to check that, is this signs of bad memory?

Relevance 100%
Preferred Solution: Detecting Bad Ram?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Detecting Bad Ram?

Does your system start to beep in any manner or are you given an error message like "virtual memory dump" ?

4 more replies
Relevance 40.59%

Hi,
I am having trouble with my windows installation after attempting to install windows 10 a second time on the same machine, but different partition.
I have used a bootable USB device with the windows 10 installation (created with the same machine and the same settings for OS).
After pressing F12 and selecting the USB as the boot device, i started the installation process and got to the stage where you select which drive / partition to install windows. But the list only contained the USB device i used to start the installation process, and the SSD did not appear when tried to refresh / reload drives (or unchecked the "hide incompatible drives" checkbox). 
After canceling the installation process, i was met with the following message when rebooting windows:
"Your PC/Device needs to be repaired.
The Boot Configuration Data file is missing some required information.
File: \BCD
Error code: 0x0000034
You'll need to use recovery tools. If you dont have..."

Before the error occured:
I have tried many different things BEFORE i got to the step above where I was able to start the USB stick and consequently ended up with the error.
However when the error occured the BIOS was reset to factory settings and i was able to log in to windows (and listen to spotify for an hour or so) before i tried the install that gave the error:

I tried installing windows 10 with a stick created from another computer. That time I got to the installation process. But when... Read more

More replies
Relevance 30.75%

Hi,

I'm running Windows 7 64 bit, and I've been running on 4 GB RAM for a while.

Today I bought four RAM sticks, 2GB each, and installed it in my desktop. but Windows only saw 4 GB of RAM. So I removed two of them, but now Windows only sees 2 GB of RAM!

My motherboard is Gigabyte GA-EP35C-DS3R . And I've installed the sticks on the yellow and red slots as you can see below:

And here are my RAM specs just in case:

Old RAM sticks: DDR2 5-5-5-18 @ 1.80v, 800MHz

New RAM sticks: DDR2 5-5-5 @ 2.20v, 1066MHz

I'm no hardware guy, so if anyone can make sense of this, I'd really appreciate it. And I've missed mentioning anything important, please let me know.
 

Answer:PC not detecting all RAM

11 more replies
Relevance 30.75%
Question: Not detecting?

Alright I am installing a fresh copy of XP and after I get a certain point I get an error and I seriously have no idea what is wrong.



I press enter then this happens...


 

Answer:Not detecting?

I'm not sure where the point of confusion is, considering the message clearly states it cannot detect the hard drive. If it's a standard IDE drive, check your cables and make sure the BIOS sees it. If it's a Serial ATA, since it's the AMD platform, you need to hit F6 and load the drivers, even if your not running a RAID setup. Also, if it's SATA, make sure the BIOS is set to use it as a regular drive, and not a RAID array.

You didn't bother to tell us if the drive is PATA or SATA, so our help is limited until we know necessary details.
 

5 more replies
Relevance 30.75%
Question: Not detecting IDE

Hope someone can help with this, last week I kept getting the message "Boot Disk Failure Insert System Disk"
After reading a thread I changed the grey cable from the hard drive to the motherboard and all was fine for a week now I get as far as detecting IDE drive and every thing stops there, also I can't get into the BIOS to see if the drive is reconised
I have a Norton Ghost backup but can't change the boot from HDD to CD as I can't get into the BIOS
Would appreciate any help with this.

Happy New Year
 

Answer:Not detecting IDE

I think we need a bit more information, 21st.

Let's start with what you were aiming for when you changed the cable connecting your hard drive to the motherboard. What was the objective? Can you put it back the way it was? What happened when you did?

What's the make and model of the motherboard? With that info, someone here can probably tell you how to get into the BIOS to change the boot order if Googling the motherboard model number doesn't get you that information. (BTW -- have you got the motherboard manual around?)

You say that the boot process gets as far as detecting the connected drives. Does the POST successfully identify the drive? What drive is it? (If the BIOS can identify the drive, it may not be a drive cable issue.)

The error message you get usually comes up when the BIOS is able to interrogate the drive, looks for a Master Boot Record, and does not find one that it can boot from. The MBR could have been corrupted or overwritten.

Another possible cause of that error message is a drive controller failure. There are several things you can do to confirm or eliminate that possibility, but I won't offer any until I know what filesystem(s) are on that drive. Without that knowledge, I might suggest something that gets unreliable results and causes you to wipe the drive when it wasn't necessary.
 

1 more replies
Relevance 30.75%

Hi,

Let me tell you a bit about the bg of my problem,i started my pc with 2 HD one with windows xp <c:> and the other was a backup <d:>,I wanted to try windows 64 bit so i bought another HD and installed it as <e:> after the i installed the trial of 64 i started to get probs with my boot.ini so i uninstalled it with the intention to install S.u.S.e linux but after i uninstalled it i couldn't access my <c:> with XP because it came up with a ntldr error so i installed windows XP on <e:> where 64 bit use to be and repaired my original xp from there.But i found out for some reason the disk names changed and my backup became <c:> my original xp became <e:> and my new xp became <d:>.

I didn't think it was anything serious so i uninstalled the new xp and installed s.u.s.e and told it to install on <d:> where my new xp was but it installed it on <e:> where my original xp was ,i'm guessing it was because of the mix up of all the names and stuff but now i lost my original xp and all its content & when I try to start the original xp (because it still comes up with the boot list) it says hal.dll is missing.

I tried starting s.u.s.e and it asks me for a password but when i enter it it comes up incorrect and when i try it on safemode it asks me for a username that it randomly selected when i was installing it and cannot remember what it was.

I reinstalled xp on the HD where i wanted linux to install <d:&g... Read more

More replies
Relevance 30.75%

Hey there,

I recently installed a 4GB DDR2 800Mhz and under Control Panel\All Control Panel Items\System i can see that installed memory 4.0GB (2.94 usable) so i have 1 GB of ram missing !

anyone?

Answer:W7 64 bit only detecting 3GB out of 4GB

I had the same exact problem. It is a motherboard limitation. You need to go into your BIOS and enable "Memory Remapping". If I remember correctly, it's in the Northbridge settings.

2 more replies
Relevance 30.75%
Question: Not detecting USB

I have a Wireless USB adapter that I'm trying to get on the network. I had it working fine till a network guy come over and started messing around. Now, when I plug in the adapter, the computer either locks up or just doesn't recognize the new hardware. It's getting power fine though. What should I look for to fix? I've tried the Add Hardware but it doesn't detect it either.

Answer:Not detecting USB

Remove all the drivers, programs, and program file folders associated with that network adapter, then reinstall it according to the instructions provided with it.

Did the network guy you are referring to do anything to your laptop specifically?

4 more replies
Relevance 30.75%
Question: Detecting USB 2.0

How can you tell if your PC has USB 2.0?
 

Answer:Detecting USB 2.0

6 more replies
Relevance 30.75%
Question: not detecting

my laptop of windows 8.1, when my mobile is connected to it, its detecting only photo transfer and for the charging but not for other USB options like file transfer what should i do?

Answer:not detecting

What phone is this? Do you see any prompts on your phone?

1 more replies
Relevance 30.75%

Until recently I've been using a 10gb hdd,but have decided to add a 80gb as a slave.However,during boot up my pc hangs on the 'Detecting Primary Slave'line.Please tell me{or give me a link} what I need to to make my pc detect the additional drive.The connections are all okay as are the jumper settings.Btw,although it's a used drive,I've been assured that it's sound.Many thanks,C.D.

Answer:Help with detecting hdd.

What is the make of the new drive?

10 more replies
Relevance 30.75%

Hey guys,

I have a really weird problem where the CD-Rom on my laptop is not detecting CDs when i insert them.

I put the CD into the CD-Rom and i hear it spinning for a minute or so, then it stops. When i go to My Computer and try to open the CD by double clicking the drive, it just opens a blank drive. I have tried multiple types of CDs: games, music, and movie CDs all have the same problem. I know that the CD-Rom itself is not the problem because i had the company, Acer, send me a brand new CD-Rom and the problem persists.

I have tried reinstalling all of the drivers, multiple times with no success.

This has been an ongoing problem for weeks now, and is frustrating because i can not play games, listen to cds, or even watch dvds so if anyone can help, i would greatly appreciate it.

Answer:CD-Rom not detecting CDs

If you right click on the Drive letter and choose properties and click on the AutoPlay tab is the radio button 'prompt me each time for an action' selected?

I'll continue to research this, sounds like something wierd with your OS, guessing Windows here.

~Ricer333

EDIT: Something just popped in my head. When you go into that area, check to see if your media (music files - .mp3, etc.) are associated with BlankCD in the windows.

You can check this another way. Open up My Computer and select Tools -> Folder Options. Scroll through the extensions list (.mp3, .avi, etc.) and see if for some reason thy are associated with BlackCD.

3 more replies
Relevance 30.75%

i use an adaptor which goes into my usb 2.0 ports ,with a ps2 pad .
It was working fine unitll ive got my pc fixed and new sound card put in
In The control panal and it says not connected but ive got it connected ,i also tryed all 4 of my usb ports and still no luck
I dont seem to need any updates for my pc so im at a loss at how i can fix this i cant even find where the adaptor installed itself to because i want to reinstall it ,ive looked in main places like program files and in my add or remove programs but to no avail.
any help would be apreciated
 

Answer:PC not detecting my ps2 pad

what kind of ps2 pad? like a PLAYSTATION 2 dance pad or a ps2 touch pad (mouse touch pad thingy) if it's the playstation one i wouldn't doupt it if your converter is fried.
 

9 more replies
Relevance 30.75%

Im running windows xp SP2, 2 evga nvidia 8800GT cards, Asus Maximus motherboard, and i have the newest drivers. But i can not get the sli working, ive looked up how to enable sli and its supposed to be in my Nvidia control panel under Manage 3d setting, but theres nothing there that says anything about sli. I have the cards connected to eachother and its setup in the bios to PEG. "PCI EXPRESS GRAPHICS"
 

Answer:XP not detecting SLI

I've had problems with enabling SLI also. In my case, I started with one card and added a second card about a month later. I had to remove all the drivers with only one card installed. Reboot. Go into BIOS and switch from single card to SLI mode. Shut down. Install 2nd card. Power up and install the latest drivers. Reboot. Go into the NVidia Control Panel and enable the SLI (if it doesn't auto enable). Reboot.
That's what I had to do. I hope this helps.
 

1 more replies
Relevance 30.75%

Hello guys! I'm having a problem here. I manually upgraded from windows 7 to Windows 10 and it isn't detecting my cd/dvd rom.



My system specifications are as follows;
FX 6350, 2x4gb ram, gtx 760, gigabyte 78lmt-usb3

Answer:CD/DVD Rom isn't detecting on Win 10!

I'm having the same problem, except the disk drive isn't even showing up in device manager. I assumed it was a problem with the disk since Autoplay did nothing, but i've tried several with no luck.

7 more replies
Relevance 30.75%

Hey everyone, When i go to sytemn information it says 261,616 kb ram. IS ThIS correct???!? What is this problem? this started happening after my other problem please look at this other thread

I am currently running another psu that is 230W but it hasnt had the problem yet like my other one did
 

Answer:PC Detecting Low RAM?!?!

That is correct. 261,616kb divided by 1024KB(the number of KB`s in 1MB) = 256MB of ram.

Regards Howard
 

7 more replies
Relevance 30.75%

A few weeks ago my CD ROM just stopped detecting any CD's.

I tried removing it from the system, reinstalling it, reinstalling drivers, checking for conflicts but nothing works.

Any CD ROM I place in the system doesnt work.

Please tell me how I can fix this problem
 

Answer:CD-ROM not detecting any CD's

First thing: Is windows detecting it? Does it show up in My Computer??

Second: Have you tried using a cd cleaner??

It may be also the drive has gone bad. It does happen.
 

2 more replies
Relevance 30.75%

Hey, so I just recently bought:
CORSAIR 2GB (2 x 1GB) 184-Pin DDR SDRAM Unbuffered DDR 550 (PC 4400) Dual Channel Kit System Memory - Retail

and installed them both in the DualChannel slots on my Asus A8N-SLI mobo. For some reason however, the computer is only detecting 1GB instead of 2, anybody know why this is?

Answer:Only detecting 1GB...

Right off, make sure they're seated properly, a lot of times new RAM is somewhat hard to push down all the way and you think you got it, but you don't really heh, happened to me before once.

Also after that, possible RAM slot could be dead and that would suck!

5 more replies
Relevance 30.75%

Hi, My old Packard Bell PC keeps detecting a PCI multimedia audio devise that is not even installed. It has audio in the mother board which does not work so I have a sound card in it but not in a PCI slot. All the plugged in stuff is accounted for and the drivers are installed. Every time I boot it it says new device so I have tried to find a driver on all the driver cds and 98 disk I have and it can't find any and says unknown device. It won't tell me what it is. Any one have a idea what is happening? Tom

Answer:PC keeps detecting something that is not there,

What pci cards do you have in the computer?

9 more replies
Relevance 30.75%
Question: USB not detecting

guys more power to our forum....

I got a problem here my PC my 4 usb doesnt detecting any devices even my Printer... and my USB CD WRITER.. before its working.. but few days ago its gone...

what is the reason why its happening this...

can anybody help me with my problem....

I have PC
XP
P4 1.7
Intel chips
845g(l)

PEACE

Answer:USB not detecting

Try to reinstall the usb composite device

9 more replies
Relevance 30.75%

Hi guys, Ive got an R50.Recived it with no hdd installed.Put a 10gb Ibm drive into it. Was working great.Then my hdd died. I have attempted to replace it with numerous drives and non are detecting in the unit. Toshiba-MK6014MAP not detecting. A seagate ST94019A . ALSO  have a IBM Travelstar IC25N020ATCS04-0 thats not detecting. I did find but cannont find again the R5X supported list of every tested hdd. Can some one point me in the direction of that HDD compatiblity list that would be great. Cheers 













Solved!

Go to Solution.

Answer:R50 not detecting any hdd

Maybe this might help ?http://www-307.ibm.com/pc/support/site.wss/MIGR-53115.html#12

2 more replies
Relevance 30.75%

Hi

My computer isnt detecting any cds, cdrs, cdrws, et etc.
It is a windows xp.
When ever i put in a cd it won't auto run, and when i double click on the disk drives in 'my computer' it opens a blank page. whenI right click and properties, it says disk is full, even though it isnt detecting one. Any help would be appreciated and thanks alot.

JW
 

Answer:xp not detecting any cds

10 more replies
Relevance 30.75%

Hey Guys,

I have a PC with a 1 TB Sata HDD. I had an old 320gb IDE HDD that I thought I may as well use, So I opened the case plugged in the hdd and while the case was open turned on the pc to test and everything was fine, the hdd was detected and I was able to access it.
Put back on the cover turned on the pc and got suck at start up trying to find the IDE drive. Re opened the case checked cables and tried again...all good!

Now I left the PC for a while and now came back to it, once again I got stuck at the start up while the PC tries to detect any IDE drives. Only way I am able to get to windows is to press F12 to go to startup and select my Sata drive that has windows installed.

Does anyone know what could be causing this?
I didnt touch any of the pins on the IDE drive so I beleive its set to master. I am also running Windows 7.
 

Answer:Detecting second IDE HDD

Is it the only drive on the IDE cable or is there another drive connected to the same IDE cable? Also is the cable 40 wire or 80 wire? Needs to be 80 wire with the blue end connected to the motherboard and the black end connected to he master drive. Also check the jumper of the drive and verify that it is set to Master, you can also try the Cable Select/CS jumper position.
 

1 more replies
Relevance 30.75%

Re: HP a1600n (Media Center) with Win 10 CreatorI have 4GB RAM installed but PC is detecting only 3GB. I installed additional RAM many years ago and PC recognized 4GB. I do not regularly check this so I have no idea when PC started seeing 3 vs 4GB installed RAM.Does this mean one or more of my RAM sticks is defective? How would I check? Thanks.

More replies
Relevance 30.75%

I finally got my pc to boot into dos but if I try to make it access C:\ it says Invalid drive or something like that, I tried the following commands:
cd C:\
cd C:
cd C:\>
C:
C:\

Answer:Ms-Dos not detecting C:\?

If c: has been formatted NTFS, then DOS cannot read it without some help (NTFS for DOS or a similar app).

3 more replies
Relevance 30.75%

Ok, heres exactly what happend...my friend gave me a hardrive(used) one day since i needed more space, when i attached it to my computer and restarted thats when the problem started, i dont know if either its my motherboard or something but anything connected to the IDEs does not get detected. harddrives,Cdrom etc, the floppy gets detected, and so does my sata raptor. I tried new another power supply..nope...I tried getting new cables, that didnt work..i tried taking out all the harddrives leaving one in, that didnt work...i also flashed my bios to newer updates which also didnt work. then i got the idea of trying to downgrade (using older versions of the "updates" for my bios..and using one hard drive and it just showed me question marks a row of them..i am stumped some help please?

window xp
3200 amd semperon
two kingstong 512s hyper x ram
10,000 rpm raptor (32 g) (sata)
k7n2 delta 2 (platium edition)
floppy drive
radion 9800 pro 256mb
600w power supply

Non detected stuff: (all ide)
20gig IBM harddrive 7200rpm
80gig seagate hd 7200rpm
80gig western dig 7200rpm
52x sony CD rom
dvd rom..
 

Answer:Not detecting Anything with IDE

14 more replies
Relevance 30.75%

In my PC desktop (Dell Dimension E520) I was unable to burn CD. But it could burn DVD and CD-RW. So I added one CD-ROM, but it did not help either. CD-ROM can write on CD-RW but not on CD-R. While I try to write on CD using DVD or CD-ROM it can not detect CD-R. Pop up window gives message to insert CD-R. Interestingly CD-ROM and DVD both can read CD and run CD. I will appreciate if anyone can help me out. If you have question about this complex situation, I will be available at [email protected].Thanks lot - Anwar

Answer:CD-R is not detecting in DVD or CD-ROM

Hi, please do not give out your email address -all communication giving help where possible is done via this Forum, for all to see.Cheers

4 more replies
Relevance 30.75%

I have been trying to get winblows to see another hdd I just added to my system. Nothing special, just an extra 10gb hdd. The BIOS is auto-detecting the hdd, but I can't see it anywhere in winblows. I'm running win98se.

Thanks in advance.

*edit*
Forgot to mention that I have the AN11 mobo.

Was also wondering if there was a way to disable the RAID detection. I don't use RAID and probably won't.
 

Answer:PC not detecting HDD

I also forgot to mention that its a Seagate 10gb drive. Windows can see the master drive fine (which is a maxtor).
 

7 more replies
Relevance 30.75%
Question: Not detecting IDE

Hi, I have a 1998 PC which I am fixing up for my wife. its a Via Technologies X86 based PC with a 350MGz CPU. i have bought a MAXTOR 40Gb HDD to replace the 5Gb existing one and I have hit a problem.When I try to boot up the diagnostics start but then freeze when it gets to 'Detecting IDE Primary Master'i have checked all the cables and plugsin fact tried new IDE cables,checked the jumpers but still cant get past'detecting IDE primary Master.I put the old HDD back in and it boots up fine.I changed the jumper setting and tried installing the new one as a slave but it still froze at the same point. I have disconnected my CD/rom and DVD/RWbut still the same. Am I missing something or could it be a faulty HDD.Any help would be appreciated.Regards

Answer:Not detecting IDE

I'm just tagging along as have similar prob on 1 pc. Ta.

10 more replies
Relevance 30.75%
Question: help detecting

Hello, I need help detecting which of the files hijack this! found that I should fix and delete.

Logfile of HijackThis v1.99.0
Scan saved at 9:22:29 AM, on 2/4/2005
Platform: Windows ME (Win9x 4.90.3000)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\SYSTEM\KERNEL32.DLL
C:\WINDOWS\SYSTEM\MSGSRV32.EXE
C:\WINDOWS\SYSTEM\mmtask.tsk
C:\WINDOWS\SYSTEM\MPREXE.EXE
C:\WINDOWS\SYSTEM\MSTASK.EXE
C:\WINDOWS\SYSTEM\SSDPSRV.EXE
C:\WINDOWS\SYSTEM\ATI2EVXX.EXE
C:\WINDOWS\EXPLORER.EXE
C:\WINDOWS\SYSTEM\RESTORE\STMGR.EXE
C:\WINDOWS\TASKMON.EXE
C:\WINDOWS\SYSTEM\SYSTRAY.EXE
C:\WINDOWS\SYSTEM\ATIPTAXX.EXE
C:\WINDOWS\SYSTEM\PRPCUI.EXE
C:\PROGRAM FILES\DELL\ACCESSDIRECT\DADAPP.EXE
C:\PROGRAM FILES\DELL\RESOLUTION ASSISTANT\COMMON\BIN\RXMON9X.EXE
C:\PROGRAM FILES\DELL\ACCESSDIRECT\DADTRAY.EXE
C:\WINDOWS\SYSTEM\WMIEXE.EXE
C:\PROGRAM FILES\DELL\RESOLUTION ASSISTANT\MOTIVEASSISTANT\BIN\MAD.EXE
C:\PROGRAM FILES\NORTON ANTIVIRUS\NAVAPW32.EXE
C:\WINDOWS\SYSTEM\MDM.EXE
C:\WINDOWS\DOCKAPP.EXE
C:\PROGRAM FILES\MOTIVE\MOTMON.EXE
C:\PROGRAM FILES\HP CD-WRITER\DIRECTCD\DIRECTCD.EXE
C:\PROGRAM FILES\LOGITECH\MOUSEWARE\SYSTEM\EM_EXEC.EXE
C:\PROGRAM FILES\MUSICMATCH\MUSICMATCH JUKEBOX\MM_TRAY.EXE
C:\WINDOWS\SYSTEM\HPZTSB04.EXE
C:\WINDOWS\SYSTEM\QTTASK.EXE
C:\PROGRAM FILES\2PORTALMON.EXE
C:\PROGRAM FILES\ALSET\HELPEXPRESS\DEFAULT\HXDL.EXE
C:\WINDOWS\SYSTEM\SPOOL32.EXE
C:\PROGRAM FILES\MSNIA\TRAYCLNT.EXE
C:\PROGRAM FILES\WINZIP\WZQKPICK.EXE... Read more

Answer:help detecting

Welcome

We ask that you please follow our procedure here. A HJT log is not the first step. Please follow the TUTORIAL listed below. When asked to post a HJT log it must not be inline but rather a .log or .txt file. It must also be place in it's own folder such as C:\Program Files\HJT, not in a temporary file.

This site has alot of good tools for cleaning up your computer. It's very important that the first thing you do is the following:

First, please follow ALL the steps in this Sticky thread READ ME FIRST BEFORE ASKING FOR SUPPORT: Basic Spyware, Trojan And Virus Removal.
If you already have any of the programs linked in the tutorial please double check your version to make sure you have the latest one and that you have any/all updates for the programs.

NOTE: In order to resolve the issues you are having it is very important that you at least try to perform all the steps as outlined. If you have any difficulty please post back letting us know what steps you have completed, what you found while doing the scans if anything and details about any problems you have encountered in completing the steps. The more details you can provide the better.

Try this... you may find it's all you need. If not post your results and I am sure one of the PROS can help you. These guys are quite busy, as you can see by the number of posts, so hang in there. Good Luck!!
 

1 more replies
Relevance 30.75%

First of all hello to all @ Tech Support Guy Forums.

Basicaly I have a Sony VAIO (VGN-AR51M)

I had my laptop sent off for repair as my graphics card is a defect Nvidia chip and it had to be re-balled however you spell it. I now have the laptop back and everything is working absolutely fine.. But! I noticed when I checked in task manager & also the BIOS my laptop was only detecting 1GB of ram in total.. It detected the whole 3GB before just fine.. So i tried a couple of things out..

I took out the 1GB stick of RAM and left the 2GB stick in and it detected the 2GB just fine. I then did the same method with just the 1GB stick left inside and it only detected the 1GB.. (I tried doing both the sticks in each slots each time to check one of the RAM slots wasn't faulty)

The problem I'm having is that when both the sticks of ram (2GB & 1GB) are in the laptop it only detects 1GB of ram.. I have been racking my brains for the past 2 hours wondering how the hell this is possible but it sure as hell is..

So my question to you guys.. How do I fix it?
 

Answer:3GB RAM only detecting 1GB

Have you called the repair shop and ask them what could be the problem since it was working before you sent it to them?
 

2 more replies
Relevance 30.75%
Question: usb not detecting

hey m using windows 7...ultimate....and in dat my usb is not getting detected...actually its showing dat drivers are installed ...bt in my computer window its not showing it as a drive...so i cant open my storage device...

Answer:usb not detecting

Try USB device with a different computer, if still not detected then usb device may have fault.

1 more replies
Relevance 30.75%
Question: Not detecting HDD

Hey guys.

I'm getting a DISK BOOT ERROR INSERT SYSTEM DISK message after switching a new power supply and CD-ROM drive into my old computer. I'm attempting to repair or reinstall Windows, but it's not reading my HDD as existing. I've tried switching IDE cables and changing things around in the BIOS, but to no avail. I know the HDD is fine because I tested it in another box, but whatever I do, the HDD won't read. Any suggestions?
 

Answer:Not detecting HDD

potential problems:
bad IDE cable
Bad controller card
DIP switches set wrong (master for slave or vice versa)
Cable installed wrong.
 

1 more replies
Relevance 30.75%

hello first off i just put together this computer for my sisters kids for christmas..... first thing that is happening is when i leave something in the floppy or cd rom and try and boot up it. says detecting ide and gets stuck there for along time..... second off i have a maxtor 80 gig 7200 8 mg buffer and it formated to a 76 gig is this correct??? please help me and happy holidays!
 

Answer:Help With Cd Rom Ide Detecting

16 more replies
Relevance 30.75%

I just bought a WD Caviar 80GB 8mb cache HD for my Dell Dimension 4100. I want to have this hard drive set as the slave for my computer; however, it is not being detecting. I connected everything properly with the jumper settings set correctly and it still does not detect.

One wierd thing is, if I set the WD hard drive as the master, it boots directly to a screen saying "insert a disk to A: to boot" or something like that. (although, I realize the HD has nothing on it and has not been formatted), the wierd thing is that it boots directly to this screen and seems to skip loading anything else on the system like the memory, floppy, etc.

Any ideas on what could be the problem here?

I'm trying to find new firmware for the motherboard, but I'm finding it hard to find...
 

Answer:2nd HD not detecting

11 more replies
Relevance 30.75%

Dear All,                    I have vista installed on my lenovo 3000 laptop. My CD ROM is not detecting any written CDs, i mean to say CD on which any softwares or songs are written from some other PCs. It is detecting only few CDs e.g. Driver CDs which came with Laptop, or Modem driver CD or CD which came with Tata-indicom USB Modem.This is happening from last few days, I have reinstalled vista but same problem is there.Can anyone plz help me out of this problem. 

More replies
Relevance 30.75%

my pc has had a 160 gig hdd in it and i recently purchased a 200gb hdd put it in my pc turned it on and its not detected...it is detected in my bios and in my hardware list but i cant see it in my computer or when i put in the disk to set up the hard drive it doesnt see it is there...i have it set up in slave position on the cable and have it set to cable select jumper any help please would be greatly apreciated thanks

Answer:PLEASE help hdd not detecting :(

1-Get the latest Bios for ur motherboard.

2- If you are connecting the 160 gig hdd together with ur new 200 gb , then try connecting -only- your new hdd.

3- Just to ensure its not a master/slave issue....unplug all ur CD-ROM(s) drivers ( power and IDE cables ) , in other words , make ONLY ur 200 hdd connected and give it a try.

Hope this helps

3 more replies
Relevance 30.34%

I recently had to reinstall windows due to a severe infection. I was unable to determine the viruses involved.

The problem is that i have a jump drive that I keep alot of file for school on. Before the infection killed my computer i had it plugged in. I have tried searching the forums to get a tool that would look for infectants on USB drives but was unable to find any. I have used MBAM to search it and it came up with nothing. I there anything I can do? Reobtaining 800mb of pdfs is not possible given my time constraints so I need something to check this drive before i put it back iinto my freshly reinstalled computer.

Answer:Detecting Usb virus

I would start with sub's flash disinfector, I use it on every drive I come accrossPlease download Flash_Disinfector.exe by sUBs and save it to your desktop.Double-click Flash_Disinfector.exe to run it and follow any prompts that may appear.The utility may ask you to insert your flash drive and/or other removable drives. Please do so and allow the utility to clean up those drives as well.Hold down the Shift key when inserting the drive until Windows detects it to keep autorun.inf from executing if it is present.Wait until it has finished scanning and then exit the program.Reboot your computer when done.Note: As part of its routine, Flash_Disinfector will create a hidden folder named autorun.inf in each partition and every USB drive that was plugged in when you ran it. Do not delete this folder...it will help protect your drives from future infection by keeping the autorun file from being installed on the root drive and running other malicious files.Next scan the drive with an updated good antivirus like avira or whatever one you use, then a good online oneMBAM was never intended to find infected installersI am checking to see which online scanner will allow a selective scan of only an external drive

4 more replies
Relevance 30.34%

i have a MSI KT3 Ultra-ARU KT333 Motherboard.. and when i tryed to put in 512mb ddr 266 ram (184 pin) it would not decet it all i got was a beeping sound when it started up.. when i put in the 128 and the 512 it starts up but only the 128 is detected.. what i want to to know is how can i get it to detect the 512 sticks that i have?? or is the 512 to big for it.. should i go with 3 sticks of 256?

any help would be apprecated


2501

Answer:motherboard not detecting new ram

personally, i'd like to ask you which OS you're using, because i had a similar problem with winME, wouldn't detect anything over 512 actually... also, check to see if your board is 266 compliant, i'm not going to search online to findout for you, you have the manual handy.. right? anyways, lemme know about your OS and i'll continue from there =) also gimme the specs on your pc

8 more replies
Relevance 30.34%

Running Windows XP with 1GB of RAM and only 960MB shows up when I goto My Computer properties. The full amount shows up in BIOS. It also shows 960MB in the Task Manager.
 

Answer:XP not detecting all of memory

If you have onboard video it will 'borrow' some of the total RAM.
 

2 more replies
Relevance 30.34%
Question: Stop detecting me

Hi all,

Not sure if this is in right section or not.

Sometimes i use yahoo to chat to family and friends. Sometimes i just log on to check a few things then log right off again. However, i have been informed by my brother that he uses a website called http://detectinvisible.com/ and can tell when im really offline or invisable. I know they must bypass something in yahoo to tell you this but i have no idea what it is.

I hear there are a few websites that now offer this and wondered if there was a way i could go online and appear offline should i decide without people knowing im really online. There probably isnt but you never know. I'm not really sure how they do it. Seems nothing is private anymore.

I've tried all sorts of suggestions but it seems nothing works. Dodgey Yahoo again.

Thank you all

Andy
 

Answer:Stop detecting me

Your brother is putting himself at risk, that site is engaged in phishing.
 

2 more replies
Relevance 30.34%

basicly my problem is i can put in the cd and the autorun will work and the game start menu thing will come up, but when i click "Play WarcraftII: Th Forzen Throne" i get a sys msg saying

CD-ROM Drive ERROR

'Please verify that yopur Frozen throne disk is in your CD-ROM drive, then click on 'Retry'

the disk is in there and it is in perfect condition so no read error or anything

i think the problem is beacause yesterday i installed a slave hardrive and a printer that has digital camera slots so the comp reads it as a removable drive

what this did was change my CD-ROM drive all the way from D: drive to F: drive and thats where i think the problem is, the game is checking for the disk in drive E: (the removable drive) i installed the slave drive and then played war3 before installing the printer. the CD-ROm drive was E: then and it worked also, but it stopped working after installing the printer and CD-ROM chanign to F: drive


and yes i have tried uninstalling and reinstalling, twice now in fact
 

Answer:Help please with war3 not detecting cd in cd-rom?

your cd rom drive might be dirty, try cleaning it.
 

8 more replies
Relevance 30.34%

Hey all. I recently decided to build a new pc seeing as my old one was very out of date.

I got it all working fine apart from the SATA HDD i bought.

Currently i've got it running on an old IDE HDD thats just too small for my needs so i got hold of a WD SATA drive and i'm really getting stressed over this thing.

When the drive is plugged in and i go into the bios the section where the drive is displayed is blank yet i press enter and i can go into the next menu where i can choose to auto detect the drive. When i auto detect it nothing happens.

My IDE Optical drives and my IDE HDD work perfectly.

I have tried reinstalling win xp and putting on the sata/raid drivers but after the F6 part where you have to press s to choose the driver i get two options one for a nvidea storage driver and the other for a raid driver. If i choose the storeage driver it says it has encountered a problem.

If i go for the raid driver the windows installation carries on until it goes to boot up into the desktop and i get a blue screen of death denoting a hardware failure.

I have an:

ECS mobo
AMD Athlon 64 4200+
2 GB 800mhz ram
Gforce 8600GT
40gb IDE HDD
160gb WD SATA HDD

Please help, i'm running out of hair to pull out.
 

Answer:BIOS Not Detecting HDD

OK, if the bios does not detect the drive, you are wasting your time with drivers, reinstalling windows, etc.

Have you tried a different sata cable?
Have you tried a different sata power connector?

You may just have a failed drive.
 

3 more replies
Relevance 30.34%

Hi all,

I have a problem on my hands unfortunately..

I have myself a Lenovo h50-50 and it is listed under my system specs. I went to turn on my PC after replacing my hard drive in it, and no screen whatsoever upon boot. The monitor does not turn on at all. I noticed that my led keyboard and everything else lit up fine and I could tell the PC booted because it took a while of holding my power button to turn it off.

What I've tried:

-put in another gpu
-reseat the camos battery
-change power supply unit
-unplug hard drives

I don't know what's going on because I remove my gpu and the PC boots with the screen lighting up. Everything is normal except for the gpu when I put it in my tower.


Any help would be greatly appreciated and I will gladly mark this as solved if it is fixed.

Answer:Lenovo H50-50 not detecting gpu

I found this:

https://forums.lenovo.com/t5/Lenovo-...0/td-p/1845869

Could my gpu's just not be supported by this motherboard? Should I just get a gpu in the list? Which one should I get then if I should?

1 more replies
Relevance 30.34%

I am too feeling the pain of this issue and more. Ok so here I go thinking adding 2 more identical sticks of RAM to bring my total up to 4gb will be easy - oh no... during POST it will only see 3gigs (tested each module in various slots and what not they work fine) - in the BIOS it only shows 3gigs, in normal running only 3gigs - yet when i run CPU-Z to check things out it finds all 4 modules and displays 4 gigs. frustrated i go digging thinkin' it can be sorted but i've had no luck yet. To stay on topic heres what i also see in the graphic adepter settings.

Total mem: 1535
Dedicated: 256
System video mem: 0
Shared system mem: 1279

i feel i'm fighting a loosing battle

any and all help will be appreciated, thanks!
 

Answer:System not detecting all RAM

10 more replies
Relevance 30.34%

sir,

i recently created an user account as a member of administrator, but when i logged in with that user account i can not access lan settings as it is showing cross mark on it. I even unable to open my computer. when i tried to give print out it is not working but when i posed anti virus i can give print outs. internet is working fine. please help me to resolve this issue.

thanks

Answer:lan is not detecting in one particular user

Can you access the LAN with the Built In Administrator account? Not the new user you created? Is this computer part of a Domain? Or is it part of a P2P network? Or is there a Group Policy on this computer?

3 more replies
Relevance 30.34%

I have tried uninstalling and installing it, but it still doesn't work. When I go into device properties, it says the drive is working fine. Any CD I put in (DVD, CD-RW, music CD, games) does not get detected. The green light comes on, and it sounds as if it is trying to work, and then nothing happens. I'm sorry if this isn't enough information but Im not too good with computers....at all.

Also, I opened it up and unplugged and replugged everything in there, but I really don't think the cables are the problem.

Help me please!

Edit: I also tried a cleaning CD (it has little brushes on it) but even that didn't get detected.
 

Answer:DVD/CD drive not detecting anything.

:wave Welcome to Major Geeks! :major

Unfortunately, it sounds to me like the drive has read its last disc. You can try hooking up the CD drive to a friends PC, or create a bootable CD on a PC that has a working CD burner and then try booting to it in your PC to see if the CD drive works independent of Windows. Those are the only 2 ways I can think of to test it. If you have access to a PC with a CD burner, use something like a bootable memory diagnostic (there's one at this link; you can use it to create an .ISO file which you'd then burn as an image to a CD-R or CDRW) or a bootable HD daignostic (download from your hard drive maker's web site).... -OR- if you have your Windows install disc, try booting to it. If you can boot to it, then we know the drive itself is OK and that the problem is elsewhere.

Good luck!
:-D
 

4 more replies
Relevance 30.34%

Not sure whether this should go in the hardware or software section but im assuming its a software problem so here goes.
I just built a comp over the weekend and for some reason windows is detecting a 3.5in floppy but I do not have one. Anyone got any ideas as to why its doing this and what I need to do to make it go away
 

Answer:xp detecting floppy thats not there

I would first check your BIOS, if your BIOS is unchanged from your previous install, it will tell Windows that there is a floppy there, you should be able to make the changes in your BIOS to eliminate the Floppy, if not remove the BIOS Battery for about a minute, then reinstall. Hope That Helps, Oh and WELCOME TO MAJOR GEEKS NEWCOMP
 

5 more replies
Relevance 30.34%

Hi

I have been getting a "Windows XP" has recovered from a serious error report. THis tells me that I have some driver issues. I found a piece of software called "Driver Detector".

It told me that i had some "Bad anbd out of date" drivers - which surprised me because me PC is only about 3 months old. Anyway, before I shell out for this software so that I can download the drivers I need is it going to work?

I am nervous - ios driver detector any good? Can anybody recommend another one?

Thanks
Edward
 

Answer:Driver Detecting...

Detective not detector

whoops - its was driver detective not detector...



D'OH
 

7 more replies
Relevance 30.34%

I just formatted my computer and installed my OS (Windows XP) but somehow my USBs are not working and are not detecting the connected hardware.

LINK

Solutions please.

Thanks.
 

Answer:USB not working/detecting

Did you install the motherboard chipset drivers after installing XP? They should be available from the computer or motherboard manufacturer websites.
 

1 more replies
Relevance 30.34%

Running windows 10 with AVG free and malwarebytes loaded. 3 or 4 time over the last week AVG pops up detecting (1st time) Ranson:win32/Exxroute (following times) Ransomer.LRV and points to a random .DLL file in the windows/temp directory. I took a look today and did not see that or any other DLL's in temp (checked hidden) directory prior to cleaning then I let AVG clean as I have before, I have run Malwarebytes and found nothing, today ran Adcleaner and it came up with a registry threat at HKLM/software/description I searched the registry and was unable to find that combination (I did not have adcleaner repair it). At this point I believe that the ransomer exists on my PC as nothing has been cleaned and it keeps popping up.
 
Thanks in advance for any help
Ken

More replies
Relevance 30.34%

when installing operating system windows files copying but in second step(progaram file,i382etc..) dvd drive not detecting
 

More replies
Relevance 30.34%

im having a hard time fixing this gyn.cmd. everytime i used the FlashDrive from my PC (computer 1) and use it to the other computer (computer 2) , the computer 2 can detect a virus named: Gyn.cmd! but why i can't detect it from my computer 1? i used thesame antivirus. both computer installed Avast home edition. please help... thank You-vince

Answer:problem detecting the gyn.cmd on my PC..

Please download Flash_Disinfector.exe by sUBs and save it to your desktop.Double-click Flash_Disinfector.exe to run it and follow any prompts that may appear.The utility may ask you to insert your flash drive and/or other removable drives. Please do so and allow the utility to clean up those drives as well.Hold down the Shift key when inserting the drive until Windows detects it to keep autorun.inf from executing if it is present.Wait until it has finished scanning and then exit the program.Reboot your computer when done.Note: As part of its routine, Flash_Disinfector will create a hidden folder named autorun.inf in each partition and every USB drive that was plugged in when you ran it. Do not delete this folder...it will help protect your drives from future infection by keeping the autorun file from being installed on the root drive and running other malicious files.----------------------------------Then, you might want to run Mbam on your computerThe process of cleaning your computer may require you to temporarily disable some security programs. If you are using SpyBot Search and Destroy, please refer to Note 2 at the bottom of this page.Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has ... Read more

1 more replies
Relevance 30.34%

I have been told that if I install a new motherboard and video card I can boot up with my present hard drive with XP Home SP2 on it and Windows will detect the new hardware and ask for the drivers and then I will be good to go. Is this correct or is it just a wishful urban legend?
 

Answer:Detecting new hardware

Leo will tell you http://ask-leo.com/can_i_use_my_old_hard_drives_with_a_new_motherboard.html
 

1 more replies
Relevance 30.34%

Hey. I recently upgraded my computer from 512MB of RAM with one gig of RAM. The problem is, after installing it, my computer is only detecting 960MB of RAM total.

Specs:
AMD Sempron Processor 2800+
1.61 GHz
960MB RAM
NVIDIA GeForce 6100

Any explanations or solutions? Thanks in advance.
 

Answer:Computer not detecting all ram

11 more replies
Relevance 30.34%

Just purchased a new SATA II HDD from PC World. When trying to run FDISK the system tells me the HDD is not present - any ideas please?

Answer:Detecting Sata II HDD

Have you loaded sata drivers?FDisk does not work with NFTS formatted drives if you have formtted the SATA drive in NTFS.

2 more replies
Relevance 30.34%

Ok I have Windows Xp and when I installed my DVD Writer it showed both the Writer and cdr in windows explorer, when I went and installed sonic software for recording dvd's I noticed the cd' drives were missing from windows explorer, there are exclamation points next to the drives! When i click on properties it says hardware detected but there is an error in the registry? any ideas?

Answer:Need help with detecting CD Drives

Umm pc-doctor? I'm sorry if my response is inadequate, because I don't have much knowledge in this field. Also is there an option for "repair" or something like that?

2 more replies
Relevance 30.34%

i have 6 gig dual channel ram installed, bios detects it but windows says i only have 3 gig under system properties. i have no problems in the device manager. whats wrong?

Answer:windows not detecting ram

Are you running a 64 bit system? If not Windows can't handle anything above about 3.2 GB RAM.

7 more replies
Relevance 30.34%

I have just bought a new mother board and it intermittently will not detect that the cat 5 is connected at startup. If I unplug the cable and plug it in it will then detect it (this can take several attempts) I am using win 7 but it was the same on vista, and all drivers are up to date.

Answer:pc not detecting cat 5 cable

Have you tried a different cat 5 cable? Possible cable fault!

4 more replies
Relevance 30.34%
Question: Detecting drivers

is there a programme that can detect and aid in downloading of the drivers i need after formatting?

Answer:Detecting drivers

Have you resolved you other problem or is this a different computer?

7 more replies
Relevance 30.34%

Running Windows XP with 1GB of RAM and only 960MB shows up when I goto My Computer properties. The full amount shows up in BIOS. It also shows 960MB in the Task Manager.

Answer:XP not detecting all memory

Do you have a graphics card or any other device that may use the RAM?? Ive heard of graphics card using the RAM before.

2 more replies
Relevance 30.34%

I tried many online solutions like updating wi fi drivers , disabling wifi driver then scanning for hardware changes ,wi fi adapter ->properties->ipv4->set everything automatic , but still my wi fi adapter is not detecting the wi fi signals , the wi fi button is also on. but it is indicating 'NOT AVAILABLE' . and i think this problem is coming after i replaced my laptop's panel and hinges from hp service centre.  Is it a hardware problem??

More replies
Relevance 30.34%
Question: detecting malwares

Good afternoon everybody,

I am asking this perhaps silly question because I'm having issues with my computer.

What is the difference between HiJackThis and Combofix ?

Is one more dedicated to some seachs than the other ?

Many Thanks for your answer

Regards

FMM

Answer:detecting malwares

Hello fermomi and to BleepingComputer.HijackThis (HJT) and ComboFix (CF) are fundamentally different tools. HJT is primarily a special registry frontend that scans certain portions of the Windows registry and displays them in an easy to read format. It also make removing entries from said portions of the registry easier. Not everything that appears in a HJT scan is malware!!! It requires a good deal of knowledge and training to be able to interpret a HJT log correctly. CF on the other hand is a special tool designed by sUBs. Its purpose is to assist a malware removal specialist in cleaning a machine. CF is an extremely powerful tool. For the benefit of both you and others who may read this thread, please heed the following warning:ComboFix is intended by its creator to be "used under the guidance and supervision of an expert", NOT for private use. Please read Combofix's Disclaimer. When CF is run without trained assistance, it can no longer be considered a "safe" tool. Using this tool incorrectly could lead to disastrous problems with your operating system such as preventing it from ever starting again.You may find this topic to be helpful - ComboFix usage, Questions, Help? - Look here***************************************************If you are having problems with malware, I would suggest you start a thread in our Am I infected? What do I do? forum stating all your symptoms, any steps you have already taken in an attempt to solve the problem, and any other detail... Read more

3 more replies
Relevance 30.34%

I went to burn a DVD yesterday, and I was quite frustrated to find that every time I clicked the option to start the burn, an error popped up saying that there was no CD recordable drives detected. Now I tried Microsoft's tutorial on setting the registry files to properly connect my device ( http://support.microsoft.com/kb/316529/EN-US/) , but the files they started to talk about in steps 6 and beyond, weren't showing up in mine.

I have a brand new Toshiba laptop with MCE 2005, and the driver it came with for the writing/reading capabilities is a Matshita UJ-8 driver, and is supposedly capable of reading, writing, and formatting discs of all types.

I also have tried listening to music cds, and that doesn't work either. If anyone knows what's going on, I'd appreciate it. Thanks-

Answer:Not detecting drivers

Solved the issue after modifying the registry.

1 more replies
Relevance 30.34%

Can anyone tell me why in my BIOS my HDD and DVD rom are present as master and slave but when windows load up the dvd rom is no where to be seen. I just install a new MOBO and I need to load all the chipset drivers via my dvd rom but it cant detect my drive. Any ideas why this happends and what is the way around this? appreciate any help that anyone can provide.

Answer:windows 98 not detecting dvd rom

Are you using a blank hard drive or is it one with windows on it from a previous system?I am wondering if its the latter if that is somehow causing this.

10 more replies
Relevance 30.34%

Hey I have a eMachine, D3123 (http://www.emachines.com/products/products.html?prod=D3123).

The issue is: when I start the system, all the fans and lights run but I get a long beep pause continuously.

Before this current problem, the system would just start but not boot up. The fans and lights would run but nothing happened. I reseated the CPU and heatsink. Now the beeping occurs. I only have 1 stick of RAM. I've tried reseating still the same thing.

I also took out the RAM and got the same thing.

I guess the motherboard is not detecting any RAM at all.

The PSU works fine, the power fan spins.
The CPU heats up nicely without fan. I was careful not to over heat.
I've removed all extra cards.
 

Answer:Motherboard not detecting RAM

Sounds like it could be ram - try a different stick, or try it in a different slot (depending on the specs of your computer)
 

3 more replies
Relevance 30.34%

Alright, I just got asked by someone at work if there was something out there to detect keyloggers for her home computer. I told her just to run ad-aware and spybot s&d, and to run a good anti-virus program, like Norton or trend micro. However, she got a little more in-depth and said that she believes both her husband and sister are spying on her because they believe she is having an affair or something. Well, I kind of tuned her out once she started talking about her personal life, but while I was standing there thinking of the keylogger problem I realized that I did not know of any specific programs to detect such a thing. This person is not the type of person that should be digging around her registry, so is there some simple program out there designed to specifically detect keylogger programs running on a computer? I may as well make her a recommendation if there is one.
 

Answer:Detecting Keyloggers

First thing i would haver her look for is something like this, http://electronickits.com/spy/finish/computer/key.htm

check this out to, the exe names and such
http://itim.tamu.edu/htmlfs/keystrokelogging.shtml
 

8 more replies
Relevance 30.34%

Dear All,

I'm new to this site, and Spyware as of this week. Having looked at the other topics, I know you guys can pull this one out for me!

I am running Norton and Antispyware (installed after problem arose)

When I start up my pc, after about 1-2 mins my internet dialler pops up and prompts me to connect. If I go to settings it shows it is trying to go to a website clon.biz (can't remember if the dialler number changes - don't think so)

Antispyware now recognises the attempted change of setting, and is blocked to not allow it. However it still happens everytime I start up, and really I want to to go away.

I have run a full scan, nothing.
I have looked in obvious places (startup menu etc) - nothing

As a computer dunce I'm unsure about stoping any processes or applications as they all appear to be recognised.

Any ideas????

Ta!

Answer:detecting but not removing

Download Autoruns from here:http://www.sysinternals.com/ntw2k/freeware/autoruns.shtmlRun it.Then Click FILE - SAVEAS - and save it as a txt file. Then post the text file here.

6 more replies
Relevance 30.34%

Ok, so I was running Win 7 RC and it was great. Its on a dual boot hard drive with xp installed. Anyways, one day it wouldn't boot into Win 7, so I ran a scan with Win 7's memory diagnostic scan and it said I had some sort of hardware problem. I didn't think that was the case since Win XP boots fine. So I talked to a buddy of mine and he told me he had a similar issue and he resolved it by removing all his ram and putting 1 stick at a time back in, and everything was fine afterwards. So I tried the same thing. I have 4 sticks - 2x1GB and 2x512MB. After I tried this method, I all of the sudden lost 1 GB of RAM. What I noticed was it was a specific 2 slots on my motherboard that doesn't seem to be detecting them. I also noticed that my northbridge fan wasn't working. I just finished replacing that.

So far I have tried a few things. I checked to make sure that the ram was still working. All the sticks work fine. The motherboard has 2 green dimm slots and 2 purple, the purple are the ones that don't work. I took all my ram out and put a single stick into a purple lot, and the system wouldn't boot. The bios only detects the ram in the green slots, along with Windows, but CPU-Z detects all 3 GB and even tells me which ram stick is in what dimm. I attached some photos of the CPU-Z on the ram. I also ran the regular windows ram diagnostic test, and after 67 passes, no errors.

Also, after reseating the ram a few times, Win 7 boots fine now, but th... Read more

Answer:Windows not detecting all my ram

9 more replies
Relevance 30.34%

I just recently bought a gig of ram to upgrade my computer (I also got a new gpu with it), but I had both sticks of ram in (I have two gigs) and it detected both sticks, but I reinstalled my OS.. and then my pc stopped detecting both, I know that neither are fried because they work individually just fine, yet together they don't work right. If it helps one is DDR and the other is DDR2. If you need to know the companies, I can post them too.
 

Answer:Computer isn't detecting all of my RAM

There is your problem. DDR and DDR2 can't work together. The number indicates a channel the ram operates at. Looks like it can see it there but not use it because you MB is not designed to work with DDR2. I'm surprised it fit in the slow. I would go buy a stick of DDR considering its awfully cheap now with DDR3 out, and see what happens when you put it in with the other DDR stick.
 

1 more replies
Relevance 30.34%

hey everyone...
just now...i put in a cd and i noticed that my cd rom drive wasnt working....i went to my computer..then my cdrom drive...n it said please insert a disk.....i then put the same cd into my burner drive..n it opened the cd rom...but none of the files were displayed.....
can somebody please help?
because i just installed win xp...n i hav backups on the cd roms...
thx alot
 

Answer:cd rom drive not detecting...somebody please help

6 more replies
Relevance 30.34%

Hello ppl, I im having a gt640 galaxy gpu and a mercury 1480twn monitor.As u see u are mentioned with ur monitor name in windows screen resolution interface and detects whats better for u and just shows limited options in the drop down box.But recently my resolution changed automatically and the drop down option shows n no. of different resolutions also my monitor name is not mentionedUpdate : I tried uninstalling and reinstalling the gpu drivers but didnt workmessage edited by Smit

Answer:Gpu not detecting my monitor

Please use complete words in your posts to make them easier to understand. Thanks.According to the spec sheet for your monitor, the native resolution is 1280 x 800 @ 60Hz so that is what you should be using. There are no monitor drivers available, probably because it's old & no longer supported. Whether it's recognized by make/model in Windows isn't important, but using the correct screen resolution is - set it & forget it.http://www.mercury-pc.com/product-s...Here's the latest graphics driver for your GT 640:http://www.nvidia.com/download/driv...

4 more replies
Relevance 30.34%

Hi guys,
I have another problem. I have a LiteON SOHW-1633S DVD Burner and LG DRG8160b DVD-ROM. I write several DVDs using my DVD burner. But the problem is that whenever I insert the bunrt DVD into any drive, it's not detected by windows! Sometimes it detectes and after restarting it fails to detect! But all the time I am able to read all the files using special software like CD/DVD diagnostic, CD Roller etc..

Also I have updated the latest firmware for my DVD-Burner and possibly latest Firmware for my DVD-ROM (which is really old). I have the ASPI layer v4.70 installed and working properly which is tested from Nero InfoTool.

Plz help guys
Thanks in advance
 

Answer:DVDs & CDs not detecting!

10 more replies
Relevance 30.34%
Question: Detecting CDRW

I am not a GENIUS in fixing. When I go to "My Computer: I don't see me F: drive. It was working before, perfectly. WHAT'S WRONG? My CDRW is connected.

PS: I am using XP.
 

More replies
Relevance 30.34%

Hi

I am trying to duel run xp and vista. I currently have vista 64 bit running and have created a second primary partition. However when trying to install xp it only detects one partition (C drive with vista installed). In disk management the new partition is showing as healthy. Is it because i am using an old version of xp (version 2002)? Or is there another reason?

Many Thanks

Answer:xp not detecting new partition

Delete the new partition in Vista, and then setup should see it as unallocated space. Press C and it will let you create a new partition.

7 more replies
Relevance 30.34%

Hello,

I recently installed windows Xp next to my Windows Vista. I plan to use XP for gaming. So anyways, I got everything to work, I got dual boot working. The only big problem I have is that XP doesn't seem to detect any drivers. I tried to manually install some. I succeeded on installing my Nvidia video card driver, was quite easy because it was just .exe.

First of all, I have no sound and internet. So my priority is to get the network card driver to work first, so I don't have to switch from XP to Vista over and over just to go to the internet.

This is what I tried: I went to the website of my computer brand (http://ts.fujitsu.com/support/downloads.html), I selected my computer (AMILO Desktop Pi 3630)
Then I get a list like this: Flash - Bios, Audio, Chipset, Graphic, Home PC, LAN, WLAN, and Other.
I clicked LAN, and downloaded the driver it said (LAN nForce Realtek RTL8211 (Onboard on MB MS-7504PV, ?ATX, V 1.1, Socket 775) )
I put that on my external harddrive, rebooted my computer, went to XP, I went to Device Manager, rightclicked on what looked the most like a network card (it was something with Ethernet).
What you should know: There were around 4-5 devices with an exclamation mark next to it
I went through the wizard, browsed to my external HD, clicked the .ini file (from the driver I downloaded), it said it was installing some files. It looked good, until it finished, it gave me this error: This device is not working properly because Windows cannot l... Read more

Answer:XP not detecting any drivers

Welcome to TSF!

All of the drivers at that site are for Vista. Doesn't look like they support XP on that system. Only thing they show for XP is System Diagnostics

You'll need to identify the hardware, either from the website or while booted to Vista and then see if you can track down drivers for it from the different manufacturers web sites.

For instance the Ethernet (LAN) is a nForce Realtek RTL8211. The nForce means it's part of the Nvidia chipset, and Realtek won't have drivers for it. So you'll need to go to Nvidia's web site.

I believe this is the driver for your chipset (and LAN/SATA)
http://www.nvidia.com/object/nforce_winxp_15.26.html

You can try www.driverguide.com to search for the Audio driver (alc azalia 888s), or search Google.

1 more replies
Relevance 30.34%

I have been having some pretty weird computer problems the last couple days. My keyboard started asking funny, then video conferencing started freaking out...and I was not using it at the time either, last night I had closed IE and went to reopen it and IE started going nuts. It kept opening one page after another, by the time I had gotten it to stop I had 60+ pages open.

I turn on my computer this morning only to find that it will not leave the Detecting IDE Drives.... screen. I have tried to get into the SetUp, but nothing happens. I have files that I would like to possibly save, if I can get past this screen.

I am running Windows XP Home.
Any suggestions or any help would very much appreciated, I only want to get in to save some files then I'll gladly wipe out my computer and start over.
I am currenty using my laptop lol

Thanks!
Dee
 

Answer:Detecting Drives...

16 more replies
Relevance 30.34%

I have had a 1gb stick of ram in my motherboard and I have had the computer for not even a year. Well it has worked all this time but today I installed another 2gb of patriot memory and when I restarted my computer the BIOS and System only detect the 2gb. How can I make the system detect all of the ram??
 

Answer:System not detecting ram??

8 more replies
Relevance 30.34%

Have had some small technical problems with windows programming.
Purchased a 160 gig External HDD to back up complete system and info data etc BUT unfortunately computer wont detect External HDD as Add hardware programming in control panel not responding....Does anyone please have an easy solution on how to get the info from the computer to the HDD and/or even detect it? regards Neil:pray:

Answer:Not Detecting Hardware

If you received a CD with your external HD use it to load the drivers for it, otherwise Google the manufacturer's web site and find the drivers for your particular model and install them. Theoretically, Windows should have a driver suitable but ......

5 more replies
Relevance 30.34%

I tried to fix my son's computer which would not boot.The first tried to reinstall Windows XP Home and was told there was a problem with the hard drive. I formatted the c drive using a Windows 98 boot disk. I then tried to install Windows XP Home butnow the computer couldn't find c drive. I rebooted a few times and now the computer cannot detect the primary master or the CD ROM drive. I'm not sure where to go from here.
 

Answer:Not Detecting Drives

first check on the Bios those the bios see the primary master or the CD ROM drive ?
next if bios dont see it check the cable make sure is in on the primary IDE channel
next check on the Hardrive jumpers make sure is set to master if you have any other hardrive unplug from the system and only work with the main drive next will be to download the diagnotic software for your hardrive and have your drive check or write zero to the drive if you dont need anything from the drive and you want to do a clean install of windows xp if you do going to do a clean install setup your bios to boot from the cdrom first put your windows xp cd in the windows xp cd will let you format and partition the drive before you install windows
 

3 more replies
Relevance 30.34%

Hello, HP 250 G3 notebookProduct number: J4T62EA#ABB It's not detecting the CD/DVD drive. I don't see it in the Device Manager:  Also when the device Eject button is pressed it's not reacting at all... Can you please help me to find a solution ?Thanks for your support!

More replies
Relevance 30.34%

If I change the CD/DVD in my drive, it doesn't notice. Opening it just shows what was on the previous one.

I've tried uninstalling them and letting XP refind them, which it does, but the problem persists.

In W98SE, There was a "Remount" option, when right-xlixking on the relevant drive.

A) Is there any way of getting this "Remount" thing for XP, like a DOS command, or summat?

Or...

B) Any ideas as to how this little quirk may be fixed?
 

Answer:XP Pro not detecting CD change.

Katzy said:

If I change the CD/DVD in my drive, it doesn't notice. Opening it just shows what was on the previous one.

I've tried uninstalling them and letting XP refind them, which it does, but the problem persists.

In W98SE, There was a "Remount" option, when right-xlixking on the relevant drive.

A) Is there any way of getting this "Remount" thing for XP, like a DOS command, or summat?

Or...

B) Any ideas as to how this little quirk may be fixed?Click to expand...

I used to have the same problem exactly. What worked for me was to turn autoplay back on. (It was disabled because I found it annoying).
 

2 more replies
Relevance 30.34%

I just installed a new motherboard and 2 new sticks of RAM (for a total of 2GB), and my computer runs great. However, when I right-click "My Computer", Windows says it only detects 1.75GB of RAM?
Any ideas why this might happen?
Thanks
 

Answer:Computer not detecting all my RAM

6 more replies
Relevance 30.34%

i recently uninstalled web n walk usb device from my computer.
and when i tried to restore it wont dectect it.
i have tried various methods, but it does not seem to be anywhere.
the device is working i have checked it on another computer.
i have a feeling i may have removed the usb mass storage device by mistake.
any idea

Answer:detecting a new device

Check the USB device section in Device Manager and see if any of the entries there have a red "x" or a yellow "!" mark next to them. I suspect they will probably show as alright. To update your USB connections right click on each entry in the USB section and select "Uninstall" (answer yes or okay to the prompt that comes up). Once they are all gone close device manager and reboot. Windows will reinstall them for you. Let us know if that gets it going.

1 more replies
Relevance 30.34%
Question: Virus Detecting

Ok, I know there's problems with my computer and internet and I know I have viruses but Norton isn't picking anything up. Is there a better program that'll do a deeper scan and help either bring those out or fix them. Every time I use Spybot or RegScrub XP the problems are still there and my java has to be re-installed.
 

Answer:Virus Detecting

10 more replies
Relevance 30.34%

well yeah i think there is something wrong with the usb hubs...cuz when i try to put in the mp3 player it wouldnt detect it...

and when i tried plugging in the printer it wouldnt detect it either...also in the devices manager thingy "universal serial bus controllers" is not there...but on my other system its there...and it detects fine...

i dont know whats wrong please help...thanks in advance
 

Answer:USB hubs not detecting anything?

9 more replies
Relevance 30.34%
Question: Detecting Arrays?

My computer(Details listed in signature) is annoying. I recently repaired missing or corrupted files with the Windows XP CD. Now my computer randomly freezes whenever Im on it. Everytime I restart it, and the last time I restarted it it told me that it was Detecting Arrays..THEN it would restart and go back to detecting arrays. IT keeps doing it over and over again. Then lastly it took me to a screen where i could enter the setup. But i dont want to mess around with *censored* in there. Anyone have any idea what to do?

Answer:Detecting Arrays?

http://www.computerhope.com/cgi-bin/yabb/YaBB.cgi?num=1172955595;start=allPlease keep your issue in the original thread...You need to determine as was asked if that is a SATA HDD or not.If it isn't there is no need for RAID to be enabled on that machine.Either dis-able it in the BIOS or un-install the drivers.

1 more replies
Relevance 30.34%

Hello Everyone:

Its official my computer has put me over the edge. I am using Windows XP and to tell you the truth Iím not that impress with it. When Rebooting the System, Plug and Play Message 'New Hardware Found' or Add New Hardware Wizard Appears saying it has detected a printer, doesn't give the name of the printer just that it detects one. However the printer has been installed and is working great. I thought maybe it wasnít installed correctly since the computer keeps detecting it so I uninstalled it and reinstalled. This didnít help so I had thought I had it figured out again what I would do is agree to the install this new printer so I went through the process once it was finished it said unable to find the new hardware, problem with installing new hardware WELL of course it did because its already installed your stupid computer. So I noticed at the end of this install process that there is an area that if you keep checked off it wonít look for this hardware again, at least thats what it says, however this didnít work it still detects this printer. Soooooooooo what I did next was try re-installing Windows XP why? I had to do something; I thought maybe the problem was with XP. But guess what? This stupid computer still detects this printer. Now I can click cancel every time I re-boot but thatís just a pain, besides the computer freezes up until this detection process is started and complete. This is a new computer and the printer has been sent ba... Read more

Answer:Detecting New Hardware

6 more replies
Relevance 30.34%

My Compaq LTE 5400 doesn't detect the floppy or hard drive.
It boots with the following message:

"49152

<F10> to enter Computer Setup"
-next screen-
"No boot disk in the system -- install a boot disk and restart"
If I enter Setup, both Hard Drive and MultiBay fields say 'none'
I would greatly appreciate any help with this.

Thanks
 

Answer:LTE 5400 not detecting HD or FD

16 more replies
Relevance 30.34%

Hi All, My back up drive has stopped working, here is what happened

1) The drive was being detected in the bios and showing in My Computer, but it was not possible to access it and it caused a major slow down of xp.

2) Now its not showing in the bios or My Computer, but the drive is spinning , i am going to try a new ide cable , any other ideas would be appreciated before i try to reover the data

Dude044
 

Answer:detecting from the bios

6 more replies
Relevance 30.34%

hEY EVERY1!
the problem is actually my bro!.... he inserted my 1GB Flash Memory in a computer "EFffected with fffffvirus"... and now my Flash is not detecting in any pc... when i connect it to my pc or on a laptop... windows shrieks.....
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
For assistance in solving this problem, click this message and laugh as much as you caaaaan!!!!!! haaaaaaaaaahhhaaaaa

Please any one can tell me how to reset this Flash so dat i can detect this with any tool specially desinged to repair the flash memory.... Note: Please i dont need any kind of data if it was there... I'm looking for a tool which can repair it by reseting the memory... and windows can detect it again... thanx

yeah something written on it... """---- 515UASO-1G ----""" Thanx in advance....
 

More replies