Computer Support Forum

3.5" HDD in a USB Caddy

Question: 3.5" HDD in a USB Caddy

I've a couple of 3.5" HDD (SATA and IDE) taken from an old Desktop and a Samsung PVR. I also have suitable external USB enclosures. The question is which Jumper settings to use (or leave unused) when in a USB enclosure. One HDD (WD) has the Boot flag set (SATA) and the other Seagate (IDE) hasn't. Both are 200-300 GB sized. Any advice appreciated.

Relevance 100%
Preferred Solution: 3.5" HDD in a USB Caddy

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: 3.5" HDD in a USB Caddy

External IDE drive jumper position should be set as master.

1 more replies
Relevance 55.76%

The Dell Optiplex 7040 MT has 2 slots for adding new 2.5" drives. However. instead of the standard 2.75" width (for a new additional 2.5" SSD drive), the slot seems to be about 3.25" wide.
Any suggestions as  to what part number is needed to fit the 2.5" drive in the designated 2.5" slot are appreciated. Thanks.

Answer:Optiplex 7040 MT: Caddy for 2.5" drive (2.5" slot)

Hi Currin,
Thanks for writing to us.
There are two size caddies
X9FV3  :: for 2.5" caddy
0CW33  :: for 3.5" caddy
Do provide us your system tag#, email address and name via private message,by clicking on my name in blue and then select send a private message
Regards

2 more replies
Relevance 55.76%

Hello All,

Here's the situation I'm in. I've got a HDD (Hard Drive disk) with WinXP on it and lots of files and emails that I need. I wanted to make that HDD a backup drive so I bought a USB adapter and a caddy. I plugged it in my main computer but it didn't show up as a new drive, so I went to "Disk Management" to enable the HDD and assign it a drive letter. After I did that and I set the drive to "Active" I get:

"Disk is not formatted"
"The disk in drive D is not formatted"
"Do you want to format it now?"

I've tried to plug it in other computers and it does the same thing. I tried making it the primary partition and I got "No operating system found"

I don't know if I enabled something or the drive syddenly got corrupted. I really need access to the files on the Hard Drive. Any ideas would be greatly appreciated.

Thanks.

Answer:USB/Caddy HDD. I can't access my files. "Disk is not formatted", hlp.

Hi,

You probbly need to look at taking ownership of the files.

M$ KB article

http://support.microsoft.com/kb/308421

hth

Ceri

3 more replies
Relevance 51.66%

I've hit a problem with this device on Windows XP SP2. The device is detected in Device Manager as a "Generic Void Disk USB Device". Windows installs a driver, "5.1.2535.0", but the device does not show under "My Computer". Therefore I cannot format it if it has not got a drive letter. The device comes only with a driver for Windows 98, but claims to be Windows XP compatible. I cannot find a driver on the manufacturer's website. The product is no longer listed on their available closures, so I presume this is just scrap unless I can get Windows to recognise it properly. Any suggestions?
 

Answer:Solved: Sumvision WXT-E 844 2.5" IDE Caddy

8 more replies
Relevance 51.66%

How to obtain the four screws that secure the caddy to the laptop body?  
(Not the screws that keep the HDD inside the caddy.)
Does anyone know the specification for these screws, and where I can buy them?
Thanks in advance.

More replies
Relevance 49.61%

Hello, I just bought an Optiplex 7010 Desktop DT Form Factor (the largest size) and need to know the right part number for the 3.5" Hard Drive Caddy that fits it.

More replies
Relevance 47.97%

Hello to everybody!I have a HP Pavilion g6-1212sqand I would like to replace the optical drive with a HDD installed inside a caddy/or something similar. My difficulty is to find the right part on the market. I'm confusing because I saw that there is 12,7 mm size and 9,5 mm size. Is there someone that can help me indicating which of this two is good? Will be appreciated any suggestion also where I can buy it, I live in Romania. Thanks in advance to who will answer! Adrian S.













Solved!

View Solution.

Answer:HDD Adapter Caddy / Similar to Caddy

Hi, Firstly your machine uses       12.7 mm (0.50-in) fixed SATA tray load Secondary: I don't know they will ship to Romania or not, please try:     http://www.ebay.com.au/itm/SATA-2nd-HDD-SSD-Hard-Drive-Caddy-for-12-7mm-Universal-CD-DVD-ROM-Optical-Bay-/280820379708 Regards.

3 more replies
Relevance 40.59%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

Answer:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Relevance 40.18%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

Answer:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Relevance 38.13%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

Answer:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Relevance 38.13%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

Answer:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Relevance 38.13%

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

More replies
Relevance 38.13%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

Answer:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Relevance 37.72%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

Answer:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Relevance 37.72%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

Answer:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Relevance 37.72%

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

More replies
Relevance 37.31%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

Answer:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Relevance 37.31%

MODS MOVE THIS TO THE RIGHT SECTION IF ITS IN THE WRONG?..thanks!

help me please! about "POP""IMAP""SMTP" incoming/outgoing mail server for Tbird....

i have no clue on what to do.. im stuck at a screen that says this





?..? said:



"Server Infomation"
"Select the type of incoming server you are using"
"[_??_] POP [_??_] IMAP"

"Enter the name of your incoming server (for example, "mail.example.net")."

"Incoming Server: [___????????????????___]"
______________________________________________________________________

"Uncheck this checkbox to store mail for this account in its own directory. that will make this account appear as a top-level acount."

"[_??_] Use Global Inbox (Store mail in Local Folders}"

"Enter the name of your outgoing server (SMTP)(for example, "smtp.example.net")."

"outgoing Server: [___????????????????___]"Click to expand...


 

Answer:help me please! about "POP""IMAP""SMTP" incoming/outgoing mail server for Tbird...

afaik hotmail does not provide pop\imap or smtp for free you may get it if you pay for the hotmail service but i would not recommend you do that just so you can get pop\imap or smtp

hrrm tbird and hotmail from the thunderbird faq
Can I access my Netscape WebMail or Hotmail accounts through Thunderbird?

No. Netscape WebMail and Hotmail use proprietary protocols. To access WebMail directly through an e-mail client requires you to use Netscape 6+ with AIM; to do so with Hotmail requires either Microsoft Outlook or Outlook Express. Of course, you can access your WebMail account on the Web at http://webmail.netscape.com/, or Hotmail at http://www.hotmail.com/.
 

8 more replies
Relevance 37.31%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

Answer:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Relevance 36.9%

Hey there...I found a folder that I've never seen in my D partition before...I partition my hdd into 3 parts...C=OS installation...D=Programs and Games...E=Misc downloads and music and pr0n ...

Well I've never had a virus or anything in my D partition before...I just found this folder named "winnt" and it had some bat files and some kind of Airline JScript and something that looks like an airplane tracker...

Then in a folder named sdata (still in the winnt folder) there's files like 911, police, air, fire, etc...OMFG!!! This is like some terrorist thing or something...FBI is gonna find me and I'll never see the light of day again!!! I'll miss the [H] and I haven't even watched LOTR Extended Platinum Collectors DVD thing (the big ass package with those book holder things)...I haven't even completed Doom 3 or started playing HL2 or even had a chance to buy an X-Box and play Halo 2!!!

AHHHHHH!!!!!! WTF is this crap on my computer??? I'm gonna delete this...I should delete it right??? Scans say it isn't a virus but what do they know...I'm screwed...

THANX
C'YA
 

Answer:OMG!!! Found some folder with files like "911" "police" "air" and a airplane tracker!

if youre os is on C: there shouldn't be a winnt dir on d:, should be safe to delete it.
 

7 more replies
Relevance 36.9%

Please help review my HijackThis File. My computer has problems with "Redirected Searches", "Advertising Pop-Ups", "Fake Anti-Virus Pop-Ups".

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 11:46:28 PM, on 10/24/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16876)
Boot mode: Normal

Edit by chaslang: Inline HJT log removed. READ & RUN ME FIRST. Malware Removal Guide sticky not followed.
 

Answer:"Redirected Searches", "Advertising Pop-Ups", "Fake Anti-Virus Pop-Ups"

Welcome to Major Geeks!

Please read ALL of this message including the notes before doing anything.

Please follow the instructions in the below link:

READ & RUN ME FIRST. Malware Removal Guide
and attach the requested logs when you finish these instructions.

**** If something does not run, write down the info to explain to us later but keep on going. ****
Do not assume that because one step does not work that they all will not. MGtools will frequently run even when all other tools will not.
After completing the READ & RUN ME and attaching your logs, make sure that you tell us what problems still remain ( if any still do )!
Helpful Notes:

If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:

Starting your computer in Safe mode

If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware and Malwarebytes ( links are given in the READ & RUN ME) onto another PC and then burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.
If you cannot seem to login to an infected user account, try using a different user... Read more

5 more replies
Relevance 36.9%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

Answer:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Relevance 36.9%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

Answer:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Relevance 36.9%

Windows 7 Home Premium

I would provide a screenshot (or three) however that is at the crux of my problem - I should perhaps say my current problem...now, with "7" (I am beginning to tire RAPIDLY of 7, much more quickly than I did with either XP, or Vista).

PROBLEM: When I attempt to "Save As" a document (Notepad, for instance), or even a Paint image, I get a window/page/screen/whatever, that has no "Buttons" ... no button to "Save", no button to "Cancel". Simply NO BUTTONS???

I had this problem the other night, and we "faked" or cheated our way through it, by using the Enter (Return?) Key to advance the cursor (cursor??) to where we wanted to be (well, we "hoped" we were "there", anyway, since we could not "see" what button or drop-down dialog box was selected or highlighted).

It's almost as if I had a "Resolution" problem, whereby the resolution is set too low (say, 800 x 600), things are too big to be seen/won't FIT on the page. However, my resolution is set to the "Recommended" 1366 x 768.

Please help...this Netbook would be a WHOLE LOT easier to throw against a wall than my desktops ever were . . .

Thanks in advance,
glenn . . .
PS, Hoping I was/am clear here...under the drop-down boxes of "File Name" and "Save as Type", there is nothing to select - not "Save" or "OK" or "Cancel" ... NOTHING????... Read more

Answer:No "Buttons" to "Save" or "Cancel" in Dialog Boxes WIN7

Hi,

Type dpi into the Search box and choose "Make text smaller or larger" at the top of the search result list. In the window that opens see what it is set to. You want it at 100% rather than 125% or 150%. So if higher than 100% change it back to 100%. Hit Apply. You will need to reboot. See if that helps.
 

5 more replies
Relevance 36.9%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Relevance 36.9%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Relevance 36.9%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

Answer:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Relevance 36.9%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

Answer:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Relevance 36.9%

Hi, my sister dropped off a gateway MT3432 laptop and when i turned it on, nothing works, It starts up but nothing shows on the screen. I hear the system booting up and spinning off the hard drive but cant get to the BIOS screen or nothing. I tried plugging in an external monitor and still nothing. I don't know what the deal is. Plz Help. I replaced the ram and the harddrive and still doing the same thing.

Answer:GATEWAY LAPTOP WONT BOOT """"HELP""""

Did your sister say she had did anything to the machine?  Played with registry? dropped it?

3 more replies
Relevance 36.08%

Guys,

I am a little confused with regard to some of the mail options in Outlook Express. (I have version 6) What is the difference between the "Drafts" and "Outbox" folders?

Further how does the "Send Later" option work from the file menu? I always thought that "Send Later" was the same as using "Drafts" but what happend was that I was doing an e-mail, went to Drafts, or clicked on "Send Later" or Outbox and then after I clicked on "Send" doing a regular send, I checked my Sent folder and about 3 copies of the same message were delivered to the same person! (I only sent one message-not 3!)

What is the deal with the "Outbox" folder? Apparently that is not like the Drafts folder....correct?

What's the difference between doing a Save, Save As, and Send Later with regard to OE functions? If I want to save a message that isn't done yet, which of these 3 options should I use? (I.e, I want the message to go to the Drafts folder for example and stay there until I TELL OE to send it.) I think whatever I did above was that I modified my message and then click on where it just automatically sent next time I opened the message. A review of these features would be helpful!

Just for the record, I also use Yahoo Mail and find that so much easier!

Jack
 

Answer:Please Review OE "Send", "Drafts", and "Outbox" Options

Jack
To save an E-Mail to your Drafts folder for work on later then you use the File\Save option.
If you wish to save the E-Mail in another format such as .EML or .TXT or .HTM then you use the Save as function. You will also be required to specify a folder to save in or use its "My Documents" default.
Send later function if only one e-mail account exists will place the e-mail in the outbox and send it the next time you click on the send receive button. If you have multiple accounts then you can specify which account to send it from.

Dave
 

2 more replies
Relevance 36.08%

hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane

Answer:Remaking "My Music", "My Pictures", "My Videos" folders

  
Quote: Originally Posted by Legume


hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane


You have a backup from before the problem started? a win 7 dvd to do a repair install?
ken

4 more replies
Relevance 36.08%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

Answer:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

1 more replies
Relevance 36.08%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

Answer:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Relevance 36.08%

Hi
I have recently updated to the creator version
My files end up in unintended destinations. When I click in the documents tab in the sidebar of the documents screen, it takes me to a ?Documents? folder that appears in ?One Drive? group. Any files that I send from my desktop end up there
Those files are also shown when I open the first ?Documents? folder that appears in the ?Quick Access? group. I have similar problems with ?Pictures? folders
I have attached screen shots that I hope will explain. I want all my files of any description to end up in the ?Documents? folder contained in the ?This PC? group. Can anyone help please?
Incidentally, I don?t understand the purpose of ?One Drive?, and don?t believe that I will have a use for it. Can I remove/disable it?

More replies
Relevance 36.08%

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

Answer:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

1 more replies
Relevance 36.08%

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

Answer:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

3 more replies
Relevance 36.08%

Hi:

Looking for insight/advice re: KB3054476.

According to Infoworld, it was "Optional" in May, but I was not offered it then.
This week, it was offered as "Important" and "Recommended" (!), but only for one of my 2 Win7/64 boxes.

I have read the MS KB article, as well as THIS FORUM THREAD, the latter of which includes a report of a BSOD due to this particular update.

However, there isn't much out on the web about it.
And most of the discussion about it is overly technical for me.
And I am confused as to why it was previously offered as "Optional", but now is "Important" or "Recommended".

I don't *think* I "need" it (as I have no webcam on this box). And I don't like to tempt fate by fixing things that are not broken.

So, 3 questions:
Is it safe to install?
Is it really necessary/important?
Or would I be OK to hide it?
Thanks very much in advance!

Answer:KB3054476 offered as "Important"/"Recommended"/"Optional"

The status of updates changes with circumstances.
If an update isn't relevant, it won't be offered at all.
If however it's relevant but the related software is not apparently in use, it may be 'optional' - and gravitate to 'Recommended' or 'Important' if the related software is in use.
It can also be promoted through the hierarchy by MS depending on feedback through WU and error-trapped feedback.


If you have (and use) a webcam, then it's probably best to install the update.

4 more replies
Relevance 35.67%

"";"C:\Windows\System32\services.exe";"Trojan horse Dropper.Generic_c.MMI";"Object is white-listed (critical/system file that should not be removed)"

There are a lot of other trojan horse walkthroughs, if someone can point in the right direction more specific to my horse droppings... :cry

Brand new computer... and AV wasnt the first thing to get downloaded... doh!
 

Answer:C:\Windows\System32\services.exe";"Trojan horse Dropper.Generic_c.MMI"";"Object is

Re: C:\Windows\System32\services.exe";"Trojan horse Dropper.Generic_c.MMI"";"Object i

Welcome to MajorGeeks, thernbear

Delete items using RogueKiller.

Double-click RogueKiller.exe to run. (Vista/7 right-click and select Run as Administrator)
When it opens, press the Scan button
Now press the Delete button.
When it is finished, there will be a log on your desktop called: RKreport[3].txt
Attach RKreport[3].txt to your next message. (How to attach)

__

- Rescan with HitmanPro, when it finds services.exe - Virus, allow it to Replace by clicking the down arrow next to the detection and choosing Replace.
If Desktop.ini - Trojan if detected again, you can allow HitmanPro to Delete this but Ignore any other detections from the time being.
Afterwards, click the Next button.
HitmanPro may want to reboot the PC in order for the changes to take affect, please do so.

__

Once you are back in Windows, run another scan with HitmanPro and then attach the latest hitmanpro.zip log. (How to attach)

__

Completely delete these two folders manually using Windows Explorer:
c:\windows\installer\{0f7e99ff-f00f-32b4-d531-ecd74ed08177}
c:\users\#2\appdata\local\{0f7e99ff-f00f-32b4-d531-ecd74ed08177}

Let me know if you were successful or not.
 

3 more replies
Relevance 35.67%

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

More replies
Relevance 35.67%
Question: IDE HD Caddy

Has anyone tried useing a DVD (apti ) as an exernal via usb in one of these

Answer:IDE HD Caddy

No, but thought about it, in theory it should work.The cases for IDE DVD drives are just larger tahn the ones for a 3.5 hard drive.

7 more replies
Relevance 35.67%

i have just purchased a dynamode usb hdd caddy
all the shit in system info shows the device as

1: in usb in shows up as mass storage device
2:in hdd it shows up the wd3200jb hdd

but when i go to windows explorer i cant see the device

..

so first of all what should the jumper settings be on the hdd-- slave,master,cable select ??
and i have been told i have to in initialize the hdd but not sure how to

any other tips would be usefull aswell..

cheers in advance
 

Answer:USB HDD CADDY !!! need help

So windows detects the device. Then it is either -
1) not formatted
2) doesnt have a drive letter

In XP goto CP>admin tools>comp mang.>disk drives
 

2 more replies
Relevance 35.67%

Hi. I bought an acer aspire e5-575g-53vg laptop. It came with an m.2 ssd so there is an open hard drive bay. I want to install a hdd but i dont have the hdd caddy to mount it into the laptop. Ive tried contacting acer live chat support but they cant sell me one because my model didnt come with one. Do you know where to purchase one?

More replies
Relevance 35.67%
Question: Caddy in a g50/80

I have a G50 80 with no dvd drive in it, will it have the components in it to add a caddy and a ssd if I want too, thanks for your help

More replies
Relevance 35.67%

Thats it realy, I was wondering if it might be a good idea as I have a lot of home video to capture and edit . I thought I could use more than one hdd to capture onto and chop and change drives as required. It would also be handy as an off site store for the more important files. But can you use any HDD?Cheers Lixdexik.

Answer:Can any HDD be used as/with a caddy?

Put a HDD to an external enclosure or buy an external HDD.

3 more replies
Relevance 35.67%
Question: HDD Caddy

Does anybody know a part #  or even a website where I can get a optical drive caddy for my HDD there is one that looks close here but it doesn't specifically say L512. I would really appreiciate the help.

Answer:HDD Caddy

thats a good question, i already have the same problem.But I need a caddy for my Idea Pad N581. Can I use an universal adapter, or if there any adapter in the lenovo store?At the moment I do not found the right adapter in the lenovo shop. Who can help me???

1 more replies
Relevance 35.67%

Hello,
I'm having problems with my WD blue 1TB HDD (which came originally with the laptop) being recognized using it in CD-ROM caddy.
I bought Dell Inspiron 17 5767 like a month ago, and of course I want to upgrade it with SSD (Samsung 850 EVO 256 GB), and then use original HDD instead of CD-ROM.
I already read the post: en.community.dell.com/.../19536697
I have Salcar caddy, which is proven good, already in previous 2 laptops, one HP and one Dell. Also the current one with this HDD was tested in older Dell and the disk is recognized and works superb. So from this I can conclude, the caddy and the disk are completely fine, something must be wrong on my new Dell side. 
I upgraded BIOS (to 1.09), SATA and other drivers yesterday ... nothing changes. 
The OS (on the SSD) is original as got from Dell, as the data was migrated with the Samsung utility from original HDD to SSD. Then HDD was formatted, currently has only one partition. 
In BIOS I disabled Virtual machine and LAN boot settings, as they are not needed. Also, LPM is disabled, as suggested in other post. But still no change. 
The HDD in caddy is not recognized in BIOS, nor Windows, nor Disk Management, nor CMD (diskpart).
I also tried to create smaller partition, about 850 GB, still not recognized. I didn't try with smaller than 750 GB, maybe should do this, but I don't believe this is a problem.
I bet there are other users out there with the same problems - did anyone got this worki... Read more

More replies
Relevance 35.67%

hi, i have a problem!i have backed up all my music cds onto a 40 gb seagate drive that sits in a caddy connected via usb.i backed them up via ide then put it in the caddy as i have no space inside my case.now most of the mp3 on there wont play and some play distorted. they all play fine via ide.please help, i like my small case!

More replies
Relevance 35.67%
Question: Caddy

I need to transfer contents of an IDE hard-drive to a Sata machine. I have been told I need a caddy!. I confess I have no idea what this is.Would someone be kind enough to explain what I need and how to get it to work?.Many thanks

Answer:Caddy

This is a IDE caddy that you put your Hard Drive into. click hereThe Jumper on your Drive as to be set to Master for it to work, you then just plug it into a USB port for it to load. Do not just pull it out when you have done as this can damage the drive. In lower Task Bard near clock you will see a Icon with a Green arrow right click on this to safely remove. If you have problems shutting it down, power your PC down then remove the plug before restarting PC

2 more replies
Relevance 35.67%

Hi. I bought an acer aspire e5-575g-53vg laptop. It came with an m.2 ssd so there is an open hard drive bay. I want to install a hdd but i dont have the hdd caddy to mount it into the laptop. Ive tried contacting acer live chat support but they cant sell me one because my model didnt come with one. Do you know where to purchase one?

Answer:Where to buy hdd caddy

You can purchase the caddy in the Acer Store.  This caddy is compatible only with: E5-575G-76YK and E5-575G-53VG models.




Recuerda marcar los comentarios que solucionan tu inconveniente como Aceptar como solución. Esto ayuda a otros usuarios a encontrar la solución con más facilidad. Haz clic en este icono para dar un Kudos a otros usuarios por su esfuerzoRemember to mark posts that resolved your issue with Accept as Solution. Use the Give Kudos button to offer a thumbs-up.

1 more replies
Relevance 35.67%

Hi everyone, I recently purchased the Z50-70 laptop and so far I love it! I feel it could be a little bit faster with a solid state drive, however.  I have a 250GB 840 Evo I can throw in (with a caddy for the 1TB HDD that's already installed), but from what I've researched I can't have a 1TB HDD in the CD drive slot, but I'd rather not put the SSD there, because it wouldn't perform at full speed and would completely defeat the purpose of that drive.  I guess what I'm asking for is the maximum capacity the CD drive slot will allow for a HDD caddy? Thanks!Gage Henry













Solved!

Go to Solution.

Answer:HDD Caddy for HDD in Z50-70?

I just put the sshhd in the caddy and the SSD on it's place. All works great and very fast. No problems.

4 more replies
Relevance 35.67%
Question: HDD Caddy

Hi guys.  It is safe to install a hdd caddy to my laptop? I upgraded my hhd with an Sandisk SSD 240GB but i need more space to store my work. I want to install the caddy on DVD-RW SATA Slot.  Thanks!

More replies
Relevance 35.67%
Question: caddy to z51

i need to install hdd-caddy to my z51-70 laptophttp://hddcaddy.com/en/lenovo-ibm-hdd-caddy/1347-lenovo-z51-70-hdd-caddy.htmlits legal to do this and i didn't not lose my warranty ??and it will work good with my laptop /?

Answer:caddy to z51

i need answer please 

1 more replies
Relevance 35.67%
Question: HD Caddy Bus

Hello, I am thinking about getting a W520.  I plan on placing an additional SSD into the media bay.  What bus is that connected to?  Does that land in the SATA-III bus, or the USB? Thanks!T.J.













Solved!

Go to Solution.

Answer:HD Caddy Bus

SATA-III

1 more replies
Relevance 35.67%

I've got one lying around somewhere... the CD drive caddy... in which you add an SSD and replace your CD drive.

Dumb question: what can I do with this?
Can I have another copy of the Windows?
Can I have Linux and multiple boots?

Thanks
 

Answer:SSD in caddy - what can I do?

Sure.
Just wondering why not install the ssd as an internal drive without the caddy?
 

1 more replies
Relevance 35.67%

I am replacing my hdd with a ssd. Thought of using the existing hdd as a 2nd drive with a hdd caddy. Should I get the 12.7 mm one or the 9.5 mm? Or is there a way to check this?

Answer:HDD Caddy for Z50 - 70

Hi deb i did the same upgrade and i bought  9.5 mm it fit perfect. 

5 more replies
Relevance 35.67%
Question: 8.1 from hd caddy

Hello all,

So I find myself in an odd situation. I upgraded form xp to windows 8.1 on an old laptop I had. Since then, this laptops video card has started to go. So what I am looking to do is to take the hd from that pc, put it in a hardrive caddy, and boot from that on a different computer. For certain reasons I need to retain both OS's.

My question is this. How will Microsoft deal with the licensing in this situation. I attempted this and got a notification that I will need to reactivate windows, but does this count as a second pc in their eyes? Or can I make the call and just say that the hardware has changed.

another note, Ideally I would like to move between both computers without re licensing, but I'm assuming this might not be possible.

More replies
Relevance 35.67%

I bought a Dell XPS 8700 desktop with an intel i7 with a 1 tb drive and 12 gb ram. I bought an intel 535 SSD (240gb) it didn't come with a caddy, and I have no clue which one to buy. Where would I buy one?? It is just " in there" as is, right now and I want it mounted

Answer:Where to buy ssd caddy?

http://www.newegg.com/Product/Produc...=-1&isNodeId=1

Nice thing about the dell 8700 is it has an eMMC card slot

4 more replies
Relevance 35.67%
Question: USB 2 Caddy

Is there any speed limitation for using HD in a USB Caddy?Like EADI posses PC100 and PC133 etc, or it is independent of that ristrictions?Please advise.'Z'

Answer:USB 2 Caddy

You will be limited to the slowest componet in the chain.I.e. the drive speed or the USB2 speed whichever is slowest

2 more replies
Relevance 35.67%

I checked the forum and it seems Lenovo still does not have a 12.7mm caddy for the W510 so I can add a second HD. Or is there any news? Also I see recommondations for the 'Chinese' caddies but it seems despite the fact that they are 12.7mm they might still be lose. Anyways, can somebody provide some experience with these. http://tinyurl.com/2dmlkwb - Link to the 'Chinese' caddies. Thanks

Answer:Caddy for Second HD

Unfortunately i bought the original Lenovo caddy and now i have a empty gap between the caddy and the ultrabay... (angry)Well i think i will find a solution to build a cover to plug it...Chris

7 more replies
Relevance 35.67%

hi, I've bought a new caddy  bay for my T420. I don't know how to setup power manager when using a SSD and a HDD. Anyone using dual SSD and HDD can show me how to setup power manager. Eg, at section "stop hard disk rotation"? I've read that when using a SSD, it should set the section "stop hard disk rotation" for NEVER

More replies
Relevance 35.67%

The desktop i bought from an asset management company did not have hard disk installed and missing the hdd caddy.any help highly appreciated!

Answer:Help! where can I buy the HDD caddy for A58?

 

3 more replies
Relevance 35.67%
Question: M58 HDD Caddy

Hi, I want to fit a second HDD to an M58p small form factor (or whatever these small ones are called!) in place of the optical drive. I assume that Lenovo do a bracket kit for this, but I can't seem to find any part numbers etc... Anyone out there shed any light on this? Many Thanks, Mike

Answer:M58 HDD Caddy

Fitting a HDD into an optical drive bay can be accomplished with an inexpensive 3.5"--> 5.25" conversion kit available anywhere (Like the one HERE). I think Lenovo has a bracket for that but it would be really expensive. The hole for the optical drive can only be covered up by a blank bezel, that's going to be the tough part to find, if it is an issue for you at all.

1 more replies
Relevance 35.67%
Question: Caddy HDD

Hello everyone. I have two "easy" questions: 1) If I open my Lenovo for change HDD with an SSD, I invalidate waranty? 2) Do you know if is reasonable utilize a support caddy for have two drive rather than DVD lector? Thanks

More replies
Relevance 35.67%

Hi. I bought an acer aspire e5-575g-53vg laptop. It came with an m.2 ssd so there is an open hard drive bay. I want to install a hdd but i dont have the hdd caddy to mount it into the laptop. Ive tried contacting acer live chat support but they cant sell me one because my model didnt come with one. Do you know where to purchase one?

Answer:Where to buy hdd caddy

You can purchase the caddy in the Acer Store.  This caddy is compatible only with: E5-575G-76YK and E5-575G-53VG models.





Recuerda marcar los comentarios que solucionan tu inconveniente como Aceptar como solución. Esto ayuda a otros usuarios a encontrar la solución con más facilidad. Haz clic en este icono para dar un Kudos a otros usuarios por su esfuerzoRemember to mark posts that resolved your issue with Accept as Solution. Use the Give Kudos button to offer a thumbs-up.

1 more replies
Relevance 35.67%
Question: Old Mac CD Caddy

Hello I recently purchased a old Macintosh Colour Classic with a external CD Caddy (Apple CD 150) and a Macintosh IIvx to create simple MIDI songs as a hobby.I was wondering if anyone is able to tell me exactly what a CD Caddy is and if a CD tray is needed in order to use it etc.I have been searching on the net endlessly and have been unable to find anything about them.Thankies  

Answer:Old Mac CD Caddy

1st generation CD drives had a removable plastic holder which you inserted the CD's into.  Then you placed the entire cassette into the drive.  Is that what you have?Is this the drive?  http://www2.sunrem.com/sun02.w?pt=661-1705&catcode=10100Here's the caddy:  http://www2.sunrem.com/sun02.w?pt=678-5059&catcode=10100

1 more replies
Relevance 35.67%
Question: caddy?

 I want a second caddy for switching out the drives on occasion.   I believe quickstart (splashtop) requires the drive to be internal, not USB. Does the S10 share the caddy with another lenovo product, so that I can find it on ebay or elsewhere?  

Answer:caddy?

I would like one as well.

2 more replies
Relevance 35.26%

The qn is in the title really; Where is a good place to get hardware from? I'm guessing I would like a 30 or 40 gig hard disk (2.5 inches?) and a USB2 caddy. Does anyone know or receommend a good price?Thanks

Answer:Where to buy portable HD and caddy

You could try your local Computer Fair or Ebay.Also see this previous thread click here

9 more replies
Relevance 35.26%

I am waiting for my new HDD drive to arrive for my laptop. The old drive is still working but not too reliable, but good enough for using as a temp storage device. If I put this old HDD into a USB caddy is it possible to copy all the data from this drive to the new drive including the Vista OS, enabling me to run Vista on the new HDD instead of the old drive. I have the recovery discs for the old drive but have been told these will not operate on the new HDD because I didn't purchase from the manufacturer. Any help appreciated.

Answer:USB Caddy to HDD copy

I never heard that a new drive would by design stop the old cd/dvd's from recovering the system. It may be that the disks simply use data on the drive that is hidden in a partition..Most new drives come with clone software. You put the new disk in the caddy and then clone it over. Then swap it. "The era of big government is over," said Clinton 1996

3 more replies
Relevance 35.26%

I've taken an IDE HD from my now-defunct old Windows ME computer, placed it in an appropriate caddy and connected it to my newish WinXP machine. The intention was to wipe it and use it as an image and data file back-up. At this point it occurred to me that it would be sensible to look at its contents just in case there was anything left on it worth keeping.However, I'm not sure how to do this, or even if it's possible at this stage. It is recognised in the Disk Management window as Disk03 (but no drive letter), with the right capacity and manufacturer's details, but is marked as not initialized and unallocated. Right-clicking brings up a sub-menu with an 'initialize' option, but I thought this was equivalent to re-formatting it so I'm reluctant to try it.It's not vital, as all the important stuff was backed up and transferred to the new computer. But any comments or advice would, as always, be gratefully received.

Answer:Reading old HD in caddy

Have you changed the jumper on the HD from Master to Slave?Also your ME HD may be FAT32 instead of NTFS. Don't know if this might make it unrecognised.

10 more replies
Relevance 35.26%

Hi all,I own an Ideapad 310 15-ISK. It comes with a 1TB Hard Drive and I want to add an SSD ( solid state drive) by replacing the optical drive and I was asking what are the dimensions of the caddy to put ssd i've to buy ?Because in specification, form factor of optical drive is 9mm and all of the caddy are 9.5mm. Thanks in advance.Regards,

More replies
Relevance 35.26%

I bought this HDD Caddy from NewModeUS to put an additional drive in the UltraBay adapter. There is a clear plastic layer with a tab on the end over the side of the caddy that has the perforated holes in it. Usually I've seen this tab to help pull the hard drive out of it's slot in a computer but I haven't seen it completely cover the perforated holes of the caddy before.  Anyone know if I should leave the plastic layer on the caddy or not? Will it effect the temp of the drive? Thanks,





_______________________________________________________W530 2436-CTO, i7-3820QM, Quadro K2000M 1920x1080 FHD Display, 32GB DDR3 1600 RAM, 500GB 7200rpm Hard Disk









Solved!

Go to Solution.

Answer:NewModeUS HDD Caddy

'afternoon.
 
leave the plastic sheet in place. it'll insulate the exposed pcb surface from the caddy.
 
cheers.

3 more replies
Relevance 35.26%

Hi, I have installed Hdd Caddy for bay adapter , but Notebook (thinkpad w540) can not recognize and see it. But same caddy works excellent on other, Toshiba notebook. what can I do? there is some settings from bios?
 
Thank you in advance
 
 
Moderator comment: Three threads merged. Subjects not edited to better allow following which replies belong together. In the future, please do not replicate threads as it splinters the discussion.

Answer:Hdd Caddy for bay adapte

which model caddy did you get? Also, when you say it doesn't recognise it, does the bios refuse to recognise it too?

9 more replies
Relevance 35.26%

Hi, I have a HP Envy 17-r105ns and would like to add a second HDD. Where can I buy a caddy and cable to do this?  Thanks

Answer:Second HDD caddy needed

Hi,Manual: http://h10032.www1.hp.com/ctg/Manual/c04696907Hard Drive Hardware Kit : 813796-001�Hard drive connector cable : 813795-001�Manual list your notebook comes with dual HDD support.https://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=614If you asked for this, then optical bay caddy is also available:2nd HDD / SSD caddy adapter:https://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=602RegardsVisruth

1 more replies
Relevance 35.26%

Hello
Can I remove optical drive from Toshiba P70-B-11R
and mount 500 GB HDD in caddy instead ?
Which caddy do I need ?
Any for 2.5 inch, 9.7 mm or does it need to be specifically designed for this model ?
If so, some link would be most welcome
Thank You

More replies
Relevance 35.26%

Hello, I received my P70, and I was surprise to see that the dvd isn't hotswapable like it was with my T510.  I can unscrew a screw, and change my dvd my a ssd caddy but there is one available ? When I bought the laptop, I asked for one.  They accepted my request and send one for me, but I received a Dummy caddy, it's even marked on it, DUMMY    (it's used probably to put a blank when we remove the DVD). I think that the right part is 00NY314, but I'm not sure.  Still 50$ US for that, is't a lot, it will be around 75$ CAN.  I need to be sure before I order that part. Can someone confirm that ?  With a picture will be nice, not that I don't trust Lenovo, but I received a dummy part, so...

Answer:P70 I it possible to hotswap dvd with a SSD caddy ?

While I can't speak directly to your question, It is clear that hot-swappability of this 4th drive is not a design feature of the P70.  It is a shame that the nod to manufacturing simplification (read: cost & maintenance requirements reduction) had eliminated a very useful feature. With my W700, I can and do swap-out the optical drive for an HDD often to make speedy backups or access archived data.  It is very convenient and helpful. Alas, some would argue that USB 3.0 and Thunderbolt attachment provides adequate support for these things -- I'd still prefer a unit with the easy swap option--a workstation is supposed to be all about power and flexibility.   By way of example, Samsung realized its design error in eliminating some features and re-introduced user-removable storage to its latest line of phones. 





______________________________________________P70, Xeon 1505 CPU, 64 GB ECC RAM 2 x 512 GB NVMe Drives, 1 TB HDD, DVD-RW, 4 K Display, NVIDIA Quadro M4000W700 model 2757-CTO (8 GB RAM, Crucial MX-100 SSD + Hitachi TravelStar 1 TB 7200 RPM Drives, Bluray R/W, NVIDIA Quadro FX3700M, WUXGA); Windows 7 Ultimate SP-1, W700 Mini-Dock

9 more replies
Relevance 35.26%

Easy question for you guys. I want to replace the original HD in my T60 with a larger SATA HD. Can I use the old HD carrier, or do I have to get one that's specifically designed for a SATA HD? Thanks very much in advance for the info.










Solved!
Go to Solution.

Answer:SATA Caddy for T60 ???

The same carrier will work just fine.
 
 

9 more replies
Relevance 35.26%

Hey guys! im new to the forum, so bare with me if i ask something that's already been answered.  the question:i have a spare 2,5" Kingston SSD lying around and i would like to put it in my Acer Apire Es1-572 50N4, i figured i need an ODD (or is is HDD?) caddy, because i want it to occupy the non existing optical drive. I noticed the internal SATA slimport when i pushed out the plastic "thing" that fill out the optical bay, so i know its doable and im pretty sure i need one in 9 or 9,5". What caddy will you recommend?are the caddies universal? PS, i from Denmark if thats make a different.   thanks in advance for you answers 

More replies
Relevance 35.26%
Relevance 35.26%

Hello to all,I hope someone can help me:I have an HP laptop 15-ay 035nl and I bought a Samsung SSD 850 evo and a caddy to replace DVD reader with the HDD mounted on the laptop. What have I done:- SSD has been put in place of the HDD, caddy was not in. I installed Windows 10 and everything was great - I replaced the DVD  with caddy with inside the HDD and here the problems started because: beginning the disk was not recognized, then I mounted again and had to wait a lifetime before it could be recognized by windows.When it was recognized I tried to format it from windows but I could just delete partitions.  I had 500 gb of unallocated space. - At this point, I swapped the two hard drives putting the SSD in the caddy and the HDD inside the laptop. Windows did not start, not only appeared a blue screen saying there was a hardware failure. When I put the SSD within the pc windows it had been corrupted and I had to reinstall windows  again. Same problem happened also when I disconnected the HDD from the motherboard and there was just SSD in the  caddy. - At this point I put the SSD in the laptop and the HDD again in the caddy.  I could not get  to format the HDD neither instal windows on SSD getting the error 80300024. Once I removed the caddy I was able to install windows on the SSD Now I am very confused because I do not know if the problem is the caddy itself or the DVD controller on the motherboard. Can someone help me?Tha... Read more

More replies
Relevance 35.26%
Question: Harddrive Caddy

What is the best way to shut down a USB hard drive caddy? I have a 120gig hardrive in my caddy and am wondering if after I do the safely remove hardware should I then be shutting down the power on my caddy or should I leave it on until I shut down my computer. Also sometimes it will not shut down that way because it says the system is busy and the only way I can shut it down is to turn off the power switch. Could somebody please tell me the safest way to turn on and off this caddy so I don't do harm to my harddrive. Thank you so much.
 

Answer:Harddrive Caddy

9 more replies
Relevance 35.26%

Hi all, I had recently upgraded my HP 15-g002ax with an SSD which now has no additional HDD slots.I believe the DVD drive can be replaced with an HDD + Caddy combination.I understand my laptop needs a 9.5mm one, but it seems there are several types of Caddied - SATA/Universal/Unibody etc. Could anyone assist me with a Caddy compatible with my laptop? Current laptop specifications: http://support.hp.com/us-en/product/HP-15-Notebook-PC-series/6545564/model/7101305/document/c0431501... 

Answer:HDD Caddy for HP 15 G002AX

Hi, Your machines uses a Fixed, serial ATA, 9.5-mm tray load ODD (Optical Dics Drive). Please try:             https://www.amazon.com/WoneNice-caddy-9-5mm-Universal-DVD-ROM/dp/B004Y8SGXW Regards.

1 more replies
Relevance 35.26%

Good morning, i'd like to remove the DVD reader for an additional HDD on HP Notebook but i don't know if i have to buy a 9.5mm or a 12mm caddy.The notebook is HP 15-ay036nl   (PN: X7H91EA #ABZ) 

More replies
Relevance 35.26%

I am updating my equipment and I am loth to get rid of my IDE dvd burner. Is there a caddy available to hold this burner, in the same way as a HDD caddy does?

More replies
Relevance 35.26%

Hi all, I buy a L440 and I noticed that it hasn't got cd drive and I want to put in this place a caddy with an other SSD. I want to know if it is possible and if it is complicated to remove the protector.










Solved!
Go to Solution.

Answer:L440 put a caddy with a new ssd

Have a look at the Hardware Maintenance Manual to get an idea how to open things.Furthermore you might consider installing an m2 ssd .

5 more replies
Relevance 35.26%

I have new pc with win7, and have tried to connect a 320GB Seagate Barracuda 7200 HDD using caddy, thru USB, so that I can copy old files from it.
An older 80GB Maxtor DiamondMax lus 9 ATA/133 HDD connects, with jumper at cable select.
The Seagate, using same jumper settings, audibly connects, and shows up in disk management as "Dynamic" and "Invalid" below, and doesn't assign a letter.
I haver tried other jumper settings with same result.

Any ideas?
 

Answer:can't see hdd in caddy on win7

I don't know what caused the disc to be seen as dynamic and or invalid but there seems to be a fix of changing it back to a Basic disk.

Now, you can't use disk management to do it because that method formats the disc destroying all data.

I see two methods for keeping data safe.

1) Using TestDisk http://mypkb.wordpress.com/2007/03/28/how-to-non-destructively-convert-dynamic-disks-to-basic-disks/

2) Using a Hex Editor http://www.wilderssecurity.com/showthread.php?t=191006

If you use the hex editor method the trick will be finding the correct disk connected to your computer. It should show as a removable disk which should make it straight froward.

As far as I can tell either method will work. I've navigated both programs so if you have any questions--ask away.

A thread that might be informative by reading through comments. http://windows7forums.com/windows-7-support/3906-dynamic-disk-invalid.html
 

2 more replies
Relevance 35.26%

... would it work (USB 2.0 interface)? I know that for extra storage, a 300Gb disc seems good value - but I get the backup storage (on DVD RW discs) and a DVD copier too - alll in one portable package - but wd this setup of an external caddy containing an internal DVD RW actually work?

Answer:CAddy & Internal DVD RW ...

CDROM caddies are not very common, but in principle I don't see why it shouldn't work. A USB2 enclosure is just a box with an IDE to USB2 adaptor. For a DVD burner, the caddy must be USB2 and your computer must support it as well (firewire would probably be slightly better). USB1 would be too slow to cope with the data transfer required for burning DVD.

4 more replies
Relevance 35.26%
Question: T420 HDD Caddy?

Anyone use one that fits properly without the gap? read that the one for sale on the Lenovo website will leave a gap on the T420. Looking to get one like this:http://www.ebay.co.uk/itm/2nd-SATA-Hard-Drive-Bay-Caddy-12-7MM-Lenovo-Thinkpad-T420-T510-T520-W520-/...  













Solved!

Go to Solution.

Answer:T420 HDD Caddy?

Did you ever purchase that Item??I am presently in the UK and looking to order one for my T420. 

2 more replies
Relevance 35.26%

Hello,

Can you put a normal Blu-Ray drive, ( http://www.ebuyer.com/product/139985 ) into a normal external caddy?

I'm thinking there could be HDCP issues?

Regards,

Alex.
 

Answer:Can you put a Blu-Ray drive into a caddy?

A Blu-Ray drive is the same size a a non-Blu-Ray drive, so yes you can put it in a caddy
 

1 more replies
Relevance 35.26%

I've just fitted a hard drive caddy and put 2nd hd in it.It has a sliding lock at the front which prevents the caddy from being removedand it also incoporates a power switch.The instuctions say the drive can be hot-swapped because releasing the lockcuts off the power supply to the disk in the caddy. If I do this with W98 runningis there likely to be a problem when I put the other disk in?My instinct is to switch the computer off before swapping drives. Any views / experiences on this please?CD

Answer:HD Caddy and hot swapping.

It is hot swappable,if you use software,but is it necessary?safer to swap when machine is off.Why risk losing your files.

3 more replies
Relevance 35.26%

Hi, I upgraded 1TB HDD to SSD and it works fine. The problem is after I install the origianl HDD to 2nd HDD caddy, windows 10 does not reconize it. When I tried to connect via SATA USB cable, it worked fine (was able to assign a driver letter to the HDD).  So here's my situation.SSD: All origianl data is migrated (even recoverary D drive) and installed in MB.HDD: formated and installed via 2nd HDD Caddy.BIOS: Updated to most recent version (2.00) In the disk management, it shows as following image: http://imgur.com/3A5f5MJI do see the HDD spaces, but  nothing appears when I right click these empty volumes.C and D drives are from the SSD. Can anyone help me with this issue? Thanks in advanced! 

Answer:Z51/70 2nd HDD CADDY Problem

Have this problem to, I wait for some answer, maybe lenovo will bring us BIOS update an then will suport 2-nd  hdd

1 more replies
Relevance 35.26%

Hello guys,I've got a problem with my caddy (second) HDD in my g6.Before few days i did fresh new installation on brand new ssd (kingston v300 if it does it matter) with windows 10 on it (while installing my second HDD it wasn't in laptop).All seems perfectly fine,works well and so on....after that i decided to put my caddy hdd back in place (instead CDROM of course) and after boot it wasn't there,was unrecognizable from BIOS and from Windows.I tried with few methods to detect it :Computer Manage > Disk Managementfrom disk part in windows promptfrom Device Manager and still the same,it still unseeable.I decide a problem comes from my caddy and change with a new one (this time was with switch ,first one wasn't with it) and still the same - invisible caddy hdd.After that put hdd back in a main socket,and formatted it,try again and...nothing,try and swtich theirs places and still same.Use last version for BIOS and all drivers looks uptodate.Thanks.Best Regards

More replies