Computer Support Forum

driver software for canon A560 not signed in XP

Question: driver software for canon A560 not signed in XP

Inatalled software from CD to run new Canon A560 digital camera. Unable to download from camera as the driver software is "not signed" (I'm using Windows XP).Can open Canon 'Zoombrowser' s/ware only to get cannot detect camera message - have tried other USB ports - no difference.Also get Msg: 3rd party INF does not contain digital signature information.contact with Canon - fruitlesscontact with Dell (XP OS installed on PC) - fruitless.Contact with PC advisor? - Please helpMuge

Relevance 100%
Preferred Solution: driver software for canon A560 not signed in XP

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: driver software for canon A560 not signed in XP

I should add to my previous thread that the camera works fine when connected to my laptop.Muge

3 more replies
Relevance 80.77%

Does anybody know if it is possible to use a Canon Powershot A560 as a webcam? Im talking about using it while it is plugged in through a usb connection.
 

Answer:Solved: Using Canon PS A560 as webcam?

Most digital still cameras are not usable as webcams.

The first reason being, when they are connected via USB to a PC they just become another drive and not a camera.

Secondly the megapixel/resolution of these is also far to big for webcam use.

PP
 

3 more replies
Relevance 79.95%

How do you remove a single or a few pictures at a time. I can remove all but what if I want to remove only a few?
 

Answer:Remove single images on Canon A560

you can do it when its connected to a computer, browse the memory card and delete what you do not want
 

1 more replies
Relevance 63.55%

but the box comes up stating "downloading from windows update" but it never progresses any further even after 1/2 hour !

My machine is an MG 4250 but the driver software states MG 4200

Running Vista

Thanks in anticipation
 

Answer:Trying to install Canon driver software

11 more replies
Relevance 63.55%

I recently bought a canon mv530i on ebay to transfer all my old mini dv tapes onto my computer. No disk came with the device. Try as I might I cannot seem to find the right driver software to install. They all seem to be updates rather than what I need. I am running Win 7. Help please!

Answer:What driver software for canon mv530i?

Windows 7 does not need a special driver for the camera, it should be recognised automatically. Are you using Firewire/IEEE1394 or what Sony and Canon refer to as DV in their handbook? Does your computer have a Firewire input? You can find information about this method of connection on Page 103 of the manual for your camera.
I have a Sony HDR which is very similar to your camera, the biggest problem I have is that some software (Serif MoviePlus) does not connect by Firewire to the camera and yet Roxio Creator and Microsoft MovieMaker have no problem.

4 more replies
Relevance 62.32%

Hello))
I need help..please )
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..
 
 
please help =)

Answer:win 7 x64 cannot insall driver software to my canon mx360 printer

Uninstall ALL software related to Canon, after deleting the printer.
 
Then reinstall everything related to printer anew, following Canon instructions for doing such.
 
Louis

2 more replies
Relevance 57.81%

I recently uninstalled and reinstalled the software (Multipass Manager 3.01) for my Canon C5500 printer; during the reinstall, I am receiving the following error "Failed to register mpservic.exe to windows NT as domain or service". Can anyone give me any insight on how to make the software register this executable to the service MPSERVICE? I tried to remove all entries for the Canon printer in the registry and reinstalled the software; but I am receiving this same error everytime and the software is uninstallled after the error. Please help!!
 

Answer:Reinstall of Canon Multipass 3.01 software for Canon C5500 printer

Two things to try: If you have anti-virus software, disable it, uninstall the cannon stuff. Reboot (be sure av is still disabled), and reinstall. Then reenable av, restart for good measure.

Another suggestion from Canon, though not apparently EXACTLY your issue:

http://www.expressresponse.com/cgi-...02877.2509.2&search_erproduct=MultiPASS+C5500

Also, see this document.. it most likely is not related, but..

http://www.expressresponse.com/cgi-...3490.14078.7&search_erproduct=MultiPASS+C5500
 

3 more replies
Relevance 54.53%

What is the best cpu temp monitoring software with signed drivers for Vista 64. I've usually ran coretemp when I was on Vista 32bit, but I dont want to have to disable driver signing everytime I boot. I've read there is a .bat file that loads the signed drivers for coretemp but again, I would have to do this everytime I boot. What is the best cpu temp software that would work everytime I boot on Vista 64.

Thanks
 

Answer:Best CPU temp software with signed drivers

Try HWmonitor, it's from the guys that make CPU-Z.
I am using it on Vista Ultimate 64bit.
 

5 more replies
Relevance 54.12%

PeerBlock is a fork of the popular Peer Guardian 2 software. Well the folks that are developing it have just received a legally signed driver for PeerBlock which means that it will run on Windows Vista and Windows 7 (32 & 64 bit) without the problems that were plaguing Peer Guardian 2.

You can check it out at PeerBlock Development

PeerBlock Free Download and Reviews - Fileforum

Answer:PeerBlock Now Has a Signed Driver

that software is false security

4 more replies
Relevance 54.12%

I have been trying now to install drivers for my Panasonic Digital Camera, which installs itself as a ZIP drive (it uses a 3.5 100MB ZiP disk instead of memory cards), and Fusion Dazzle which is an analog to digital convereter. Both plug in via USB. They used to work perfectly until I had to reformat and reinstall Windows on my computer.

I now get an error message that it is missing certain files (which ARE on the system) and it is looking for "C:\PCLEUSB.drv". When I point it to the correct driver location I get an error message saying that this driver has not been digitally signed to be compatible for Windows XP and will now exit installation.

I am using the most current drivers from the manufacturer and they say that they are Windows compatible and I am the first to have this problem. So far, they have been unable to assist.

Any suggestions?
Ed
 

Answer:Driver not Windows XP signed

usually the program will ask you if you want to continue, I have never experienced where it just "exited" on it's own. I always continue regardless but it is up to the user.
 

2 more replies
Relevance 54.12%

I recently got a docking station for my laptop (Dell precision M65 w/WinXP Pro SP3 all updates) and when I plugged it in (after all the plug-n-play stuff detected the new docking station stuff), the mouse plugged into the dock USB port would not work (it worked fine previously when plugged into the laptop USB port). I undocked and plugged the mouse back into the laptop's port but it still didn't work.

I went into the device management applet and and tried to update the driver. There was nothing under "Mice and other pointing devices" except the PS/2 touchpad. Under "Human Interface Devices" there was an entry called "HID-Compliant device" If I deleted that device and then did a "scan for hardware changes" I would get the "found new hardware" popup in the tray and then breifly see "Dell USB Optical Mouse" during which the mouse would work but within 2 or 3 seconds it would switch to "HID-Compliant device" and then inform me that my hardware was ready to use at which point the mouse stopped working.

After much screwing around with the device manager and various other USB mice, I found that I could use the "Update Driver" right-click menu item to force the driver to "HID-Compliant mouse" by bypassing all the "Automatic" stuff. This resuted in a working mouse, but I have to do this every time I turn on the laptop.

I have noticed that while following the dialogs during... Read more

More replies
Relevance 54.12%

Hey guys can somebody please help me im trying to install a vodafone 3G modem on my HP Pavilion DV7 laptop but i cant it says driver not digitally signed. Im using windows 7 home premium 64 bit

Answer:driver not digitally signed

Hello Tokelo and welcome to the forums.

Your best bet is try this - Disable Driver Signing in Windows 7

I have not tried it myself but it may help.

Report back with your findings.

Lucky

1 more replies
Relevance 54.12%

Am trying to install HP Deskjet 630c printer and it keeps telling me this driver is not digitally signed. I just put Windows xp on the computer. What does this mean and can I get help? I am not very computer literate and any help would greatly appreciated. Many thanks Paula.

Answer:driver is not digitally signed

"Not digitally signed" means Microsoft have not tested this driver and verified it to be compatible with Win XP.  This does not mean it will not work, you should click on the "continue anyway" to install your print driver.  If this is a concern you should check the HP web site for newer driver tested by MS.Kim

1 more replies
Relevance 54.12%

Greetings to all, I have W520 64 bit Windows 7. I get an alert when I restart the laptop indicating a digital signed driver for drive Rapid Boost Drive. How do I get one or stop getting this message ? Thank youi. Ldxrunner

Answer:Need a digital signed driver

Do you mean RapidBoot?

4 more replies
Relevance 54.12%

I'll try to keep this brief:

> Upgraded GFX cards to 2 x Asus EAH4980 (ATI Radeon HD4890 architecture) from NVidia 8800GTS

> Performed full format on HD and reinstalled Windows Vista X64 Home Premium as well as SP1 and SP2

> Installed chipset drivers etc.

> Installed bundled VGA drivers (8.592)

> Installed miscellaneous software/games

System was running very stable and performing well in Benchmarking tests and games. I then tried to update the VGA drivers to the latest versions, first from ATI's own website - Catalyst 9.8 with VGA driver displayed in Device Manager as 8.640 - and then from Asus' website - displayed as 8.630 in Device Manager.

No matter what drivers I update to I am met with BSOD errors as soon as I try to run any kind of media on my PC. The dump files/dxdiag info etc. is attached to this post.

Upon investigation I note that one driver is not loading and is listed as 'not digitally signed', namely

ATKDispLowFilter.sys

This driver is an AsusTek release. It appears to load ok before I perform these driver updates. I can find no reference to any issues with it either on Asus' forums or elsewhere so this doesn't appear to be a common problem.

I've tried to locate a signed version of the driver to no avail.

Any solution would be very much appreciated.

Phil



-----------------------------------------------------------------------

System Info:

Asus Rampage Formula MB
Intel Q9550 45nM
Nvidia 4x1... Read more

More replies
Relevance 53.71%

I create a signed driver named fangcloud.sys, and signtool.exe to verify the driver like follow:
PS C:\Program Files (x86)\Windows Kits\10\bin\10.0.15063.0\x86> .\signtool.exe verify /v /pa D:\code\SyncNewVision\build
\windows\component\driver\64\win7\fangcloud.sys

Verifying: D:\code\SyncNewVision\build\windows\component\driver\64\win7\fangcloud.sys

Signature Index: 0 (Primary Signature)
Hash of file (sha1): 11C8FF8DD2070FA8A6EE7727007358812E26AA5A

Signing Certificate Chain:
    Issued to: VeriSign Class 3 Public Primary Certification Authority - G5
    Issued by: VeriSign Class 3 Public Primary Certification Authority - G5
    Expires:   Thu Jul 17 07:59:59 2036
    SHA1 hash: 4EB6D578499B1CCF5F581EAD56BE3D9B6744A5E5

        Issued to: Symantec Class 3 SHA256 Code Signing CA
        Issued by: VeriSign Class 3 Public Primary Certification Authority - G5
        Expires:   Sun Dec 10 07:59:59 2023
        SHA1 hash: 007790F6561DAD89B0BCD85585762495E358F8A5

            Issued to: Hangzhou Yifangyun Network Technology Co., Ltd.
            Issued by: Symantec Class 3 SHA256 Code Signing CA
            Expires:   Tue Aug 20 07:59:59 2019
            SHA1 hash: 12BA8EBB01FCA162472D6A6... Read more

More replies
Relevance 53.71%

Hi, I finally have my File System mini-filter driver working great, and tested it a lot on Vista 64-bit using the testsigning boot option. All was fine.

However, when I turn testsigning OFF and try to start the service (the driver), I get the StartService failed with 577 - windows cannot verify the digital signature. Note that the driver in INSTALLED, and the Registry is updated, etc. I just can't start the service (even when running as Admin).

It is signed using a Microsoft cross-certificate, based on the original certificate issued by GlobalSign, as directed in MSDN. You can examine the certificate using the driver's properties, and all looks fine.

I also tried installing the certificate, but that made no difference. This should all be correct, except that it doesn't work!! Any idea what is going on here? Any help would be greatly appreciated! I thought I was all done with this project, but since it doesn't work, I am currently screwed. THANKS!

More replies
Relevance 53.71%

I have NVIDIA GeForce 8800 GT with which I have had some driver issues. While checking the Driver details in Device Manager I noticed that some Driver files are not digitally signed. These are: C:\Windows\System32\nvcpl.cplC:\Windows\System32\nvcplui.exeC:\Windows\System32\nvcpluir.dllC:\Windows\System32\nvexpbar.dllCould this be causing problems with my drivers?

Answer:Driver files not digitally signed

It is my view that you should always download drivers form the Manufacturers website. To update your current drivers go hereclick here

3 more replies
Relevance 53.71%

Good evening,

I just reinstalled XP on a friends machine that was pooched. It is a Dell DIM4400. Everything is working except for the sound card. It is a built in sound card. When the computer boots up the new hardware wizard comes up asking for a driver for a realtek AC97 Audio device. I have tried everything I can to install the driver but each time I try I get an error that the driver is not digitally signed and it won't install. If I try in safe mode it installs but I get a blue screen upon startup and have to reboot. I do not have the orignial Dell cd but I have tried every driver from the Dell site that should work on this model of computer. I have updated the chip set drivers on the motherboard etc. I just can't get this sound card to work. Any advice??
 

More replies
Relevance 53.71%

My audio driver won't install b/c it's not signed. Anyway around this? I can't use the Vista driver b/c that didn't work for my surround sound on my mobo. ASUS has Win7 x64 drivers, but their not signed

Answer:My audio driver won't install b/c it's not signed -_-

Anyone know how I can get this installed?

9 more replies
Relevance 53.71%

Hey,

So I just upgrade to Vista x64 and 4GB of memory (courtesy of OCZ).

However, when installing the x64 version of MagicDisc/MagicISO I get the following error:

Can I get around this?
 

Answer:Required Digitally Signed Driver?

Uhmmm... yes, you can by pressing F8 at boot time and choosing to ignore the warnings about unsigned drivers, but you have to do it each and every time you boot. There is a way to permanently disable that driver signing requirement but I'm leery to give out the info anymore since it hosed a few people's machines recently.

It wasn't my fault that they chose to continue using shitty old drivers, but they blamed me for the mistake they made anyway.

Vista x64 is a more secure and stable OS than the 32 bit version, and that's one of the primary reasons why: the driver signing requirement. Disabling it or 'getting around it' will more than likely end up causing you issues at some point.

Google can find the specific method to disable the signing requirement permanently, or a search here might find it since it's been posted about 3 times over the past 4 months or so.

Good luck, either way...
 

5 more replies
Relevance 53.71%

G'day. I'm trying to install my old VisionPLus DVB-T card into a Windows 7 O/S box and it won't recognise any of the old drivers. When I try to install the TwinHan Digital tv software, Windows can't/ won't install them.

I've downloaded and tried the latest (DigitalTV 3.4 Build 19-02_20090212) and windows comes up with "Driver not found". I've tried to install in compatability mode but still no good.

When installing the above, it identifies my card as “PCI CX-87A with MCU DVB-S/-C/-T/ATSC card”.

Out of all the available drivers on Twinhan's site, which would be the best for my card?

Thanks
 

Answer:Driver not digitally signed so won't install

64bit Windows 7?

http://suffolk757.com/blog/2009/03/05/installing-unsigned-drivers-in-windows-7/

Out of all the available drivers on Twinhan's site, which would be the best for my card?
Click to expand...

The one written for Vista would be my choice, probably not one for W7 yet, may never be.

Looks like MS ha removed a way to disable unsigned drivers protection in Vista64, so probably is the same for 7
http://www.mydigitallife.info/2008/...-cause-drivers-not-found-in-64-bit-vista-x64/
The issue is known to affect PeerGuardian, TV tuner cards, Gigabit Ethernet adapters, CD/DVD-ROM/RW drives, and many other devices.Click to expand...

Looks like unsigned drivers are a no go for x64 Vista and Windows 7, well there are some workarounds in the article above, sounds like a hassle.
Not sure if this software will work with W7
http://www.tipandtrick.net/2008/per...iver-signature-signing-with-readydriver-plus/
 

3 more replies
Relevance 53.3%

I have known that,the information sent to Microsoft when a user installs a program includes IP address, a hash of the installer and digital signature, and possibly the filename of the application.



from: http://stackoverflow.com/questions/12311203/how-to-pass-the-smart-screen-on-win8-when-install-a-signed-application



The question is that, does Microsoft collect any other information that I dose not mentioned?

More replies
Relevance 53.3%

I have known that,the information sent to Microsoft when a user installs a program includes IP address, a hash of the installer and digital signature, and possibly the filename of the application.
from:
http://stackoverflow.com/questions/12311203/how-to-pass-the-smart-screen-on-win8-when-install-a-signed-application
The question is that, does Microsoft collect any other information that I dose not mentioned?

More replies
Relevance 53.3%

OneDrive on my laptop is showing that I am not signed in. I have verified that I am signed into my Microsoft account, and I can access OneDrive online and on my phone.

Answer:Why is OneDrive on my laptop showing as not signed in when I am signed in on all other devices?

I'm not 100% sure, but I believe you might have to sign in separately on your laptop for it.

1 more replies
Relevance 52.89%

If you have a computer that is running Windows 7 or Windows Server 2008 R2 and you install a driver that has a Windows Hardware Quality Labs (WHQL) or Authenticode signature on the computer.
But in Device Manager, when you expand the corresponding device, right-click the driver, and then click Properties and then click the Driver Details button on the Driver tab, you may find that the driver file is displayed as unsigned! This issue occurs because of incorrect logic when the Authenticode flag in the catalog file of the driver is checked.
To fix this issue download and apply this hotfix from KB2619914.

More replies
Relevance 52.89%

downloaded samsung magician and installed it. it started up and apparently i need some sort of digitally signed driver now?

"program compatibility assistant"

"samsung magician application resource
samsung india software operations

windows blocked installation of a digitally unsigned driver. uninstall the program that uses the driver, and control releasers website to get a signed version of the driver"

Answer:samsung magician need digitally signed driver

You don't need Magician for the drive to work just fine. You may not get all the advanced features, but the drive will be plenty fast.

1 more replies
Relevance 52.89%

I'd like to install a graphics card utility called RivaTuner but it requires that signed driver checking is disabled in Vista x64.

I'm running Vista x64 Service Pack 2, so how can I disable signed driver checking?

Answer:How can I disable signed driver checking in Vista x64 SP2?

Hello sofakng,
Try F8 on bootup and disable from there, i think this will work. Good luck and please post your results, thank's.

2 more replies
Relevance 52.89%

I recently purchased a new pc that came with win vista 64 bit premium home installed. I am now reloading all my old programs and I keep getting ?windows requires a digitally signed driver" error message. I also can't seem to play my old movie files, all of which played fine when I had Win XP. Apparently Vista does not want me to make my own decisions, so I am wondering how I might go about disabling all this extra secure vista crap. Can I go into Control panel and disable the BitLocker Drive Encryption? Or do I need uninstall 64bit and install the Vista 32 bit? Would that be a smooth transition? Would all my stuff work again if I had the less securitized 32bit Vista? Thanks for any help you may provide.
Regards,
William

Answer:windows requires digitally signed driver

Welcome to the Vista forums

1) You don't want to disable UAC (User Account Control) as it does a lot to protect your computer from various malware. If you really feel the urge to turn it off, then you can in control panel in the User Account section. Once turned off, you'll get the red shield in the bottom right saying it's disabled. Disable security warnings by opening security centre and going to "change how security centre warns me" or something and choose the "no warnings" option.

2) Just download the Vista codec pack (just Google it and you should find it) and DivX and you should have no problems watching videos.

3) You can install unsigned drivers on Vista 64 bit, do this by running an elevated command prompt (right click on command prompt in Start menu and click "run as administrator".

Type this and press enter bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS

When you reboot, you should be able to install unsigned drivers.
Also, I looked on the HP website for your computer, and it has 6GB RAM, so going to Vista 32bit would only allow you to use about 3.5GB RAM. I also saw it only has an Nvidia 6150e onboard graphic card. Are you using this? As if you upgraded this to a graphic card, you'd notice better performance on Vista as well.

2 more replies
Relevance 52.89%

Hi all,

please can someone help me.....

I am trying to install my Adaptec 1430SA controller card, for use with Win7 64bit, i have been trying for hours !

I have now got as far as windows seeing the right driver for the card, but windows refusing the driver because it is not digitally signed... i have downloaded the correct driver from adpatec.com ensuring it was the driver for use with win7 64 bit...

i dont know what i should do now, ive tried booting from an ms dos diskette and loading the drivers that way, but nothing seems to work....

PLEASE HELP ME !!!

Answer:HELP! Driver is NOT digitally signed for Adaptec 1430SA

Hi press F8 when windows is starting and you can deactivate it for the time you are on, alas you have to do
it each time you reboot. Have to go will try help later.

4 more replies
Relevance 52.89%

downloaded samsung magician and installed it. it started up and apparently i need some sort of digitally signed driver now?

"program compatibility assistant"

"samsung magician application resource
samsung india software operations

windows blocked installation of a digitally unsigned driver. uninstall the program that uses the driver, and control releasers website to get a signed version of the driver"

Answer:samsung magician need digitally signed driver

You don't need Magician for the drive to work just fine. You may not get all the advanced features, but the drive will be plenty fast.

9 more replies
Relevance 52.89%

is it necessary to sign driver in win xp 32 sp2.

when i google i got that it is necessary for win vista , win7 and other upper version.

Answer:windows require a digitally signed driver xp 32 sp2

A signed driver is not necessary in Windows. It is an extra security layer, as drivers can become corrupt by malware. If you obtained the driver from a trusted source (like the device manufacturer's website), you can go ahead and tell Windows to install it.

3 more replies
Relevance 52.89%

I am having a heck of a time. I have installed Windows Vista Home Premium 64 Bit and the ASUS P5QC mobo I have came with an unsigned 64 bit Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
driver.

I called ASUS tech support and talked to them and as of this time, they have only a beta version of the 64 bit signed driver. Vista is not accepting the driver and is considering it as unsigned, so I am left without a computer that can connect to the net.

I have searched hi and low all over the internet to see if I could buy a wired ethernet adapter which has a 64 bit signed driver, but all of the ethernet cards I have been able to find are only compatible with the 32 bit version of Vista or they only have unsigned drivers for their ethernet cards. This is really frustrating!

Does anyone know here WHO (what manufacturer, make, model) of a wired ethernet adapter card 10/100 or 10/1000/1000 (that does not cost a fortune - is retail version, not industrial or commercial)
I might be able to purchase that has the appropriate signed drivers - or

Does anyone here know HOW to disable the signed driver enforcement in Vista Home Premium 64 Bit with SP1? I understand it was possible to do it at one time, but since Microsoft HEXED us with two patches, that route has been disabled. So if there is a way to disable the mandatory signed driver requirement, I would like a step by step explanation of how to do it, in lieu of the need to purchase a new card (my ASIS mobo comes with an UNSIGN... Read more

Answer:Vista 64 Bit Ethernet Signed Driver Trouble

Try Updating your BIOS. I have the ASUS P5QC mobo, and the wired connection works great with Vista Ultimate x64. Perhaps you have a bad mobo?

~Lordbob

27 more replies
Relevance 52.89%

MAIN Problem #1:

Hi I'm wondering if anyone knows if i can find a Microsoft Certified Display adapter/video card driver (are those the same thing?) for my :
ASUS AGP-V7100 Geforce2 MX video card.

runnig win98/SE on a VIA chipset

The reason i ask is because when i look at my drivers through the DirectX diagnostic tool 's display tab it shows my driver as 'nvdisp.drv' and in the 'notes' sections adds :

" The file nvdisp.drv is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs. You may be able to get a signed driver from the manufacturer of the hardware device"

but when i look through the ASUS home page i can't find my video card. I know my driver is from NVIDIA and i've found the right page to update from them but i'm also wanting to update my chipset driver from VIA and they warn of compatibility problems with NVIDIA so i'm looking for a "signed" "certified" or "standard" adpater/driver?
[current driver listed as ASUS AGP-V7100 SDRAM v12.60 in the device manager]
**********************************
**********************************
Related probelm #2

The reason i'm updating my chipset driver is because i need to update my diplay adapter. And I'm updating that because i'm updating my direct X. All because i'm having compatibility problems with my new CD burner's "NERO" software (OEM ver... Read more

Answer:Certified/Signed display adapter/driver?

11 more replies
Relevance 52.89%

help !!!! i was uninstalling what i thought were unimportant stuff & accidentaly uninstalled my sound manager can anyone tell me where i can find a Windows XP digitally signed Realtek AC?97 driver

Answer:help i need a Windows XP digitally signed Realtek AC’97 driver

Hi mate,
check what make/model is your Motherboard, visit manufacturers web site and download sound driver for that type of Motherboard...

2 more replies
Relevance 52.89%

Hi

The last few times I started my computer, the system comes with the warning:

"Windows requires a digitally signed driver
Driver: Broadcom NetDetect Driver
Service: BASFND
Publisher: Broadcom Corporation
Location: C:\Program Files\Bra...\BASFND.sys"

Windows suggests to uninstall the program or device that uses this driver and check the publishers support site to get a digitally signed driver.

The problem is that I have no idea of which program or hardware is using this driver. All the drivers I have installed in my computer are from the computer manufacturer.
I have also been at Broadcoms homepage and there is plenty of things to download there. But I dont want to ruin anything.

Suggestions on what to do?

System: Windows Vista 64
 

Answer:Windows requires a digitally signed driver

Broadcom is your onboard ethernet, I don't see why it would suddenly complain unless there was an update.:confused You can disable driver signing but it only cures the symptom and not the cause.
 

2 more replies
Relevance 52.89%

I'm trying to install a program, but I says I can't install an unsigned driver.






Quote:
Driver: CPU Core Temperature Monitor
Service: Logitech CPU Core Tempurature (not a typo)


I've tried Disable Driver Signature Enforcement in my bios, and DDISABLE_INTEGRITY_CHECKS in cmd.

Neither works.

Answer:Need to bypass digitally signed driver requirement.

Go to Start Menu > Run and type the following command: bcdedit /set nointegritychecks ON
Restart the PC and install the unsigned driver
After installation go to Start Menu > Run and type the following command: bcdedit /set nointegritychecks OFF
Restart your PC

4 more replies
Relevance 52.48%

My harddrive went out and I put a new one in. It was a brand new drive and I loaded Windows 7 Home Premium 64bit from my laptop's recovery disk that came with the inital purchase. When I started to add the drivers 2 of them came up as unable to verify the signatures. Most importantly the driver for my Wifi adapter, which is an Intel Wifi Link 1000 BGN says this. Windows refuses to run it in that state. So I have no internet and it says that the adapter is not installed or is disabled. When I go into the Device Manager the adapter is there with a yellow "!" and has an error code 52 (for unsigned driver). It shows installed and enabled though

I installed the driver from the intial driver disc and it says unsigned, I was able to get the latest driver from Intel's website and that too says it can't verify the digital signature.

When I boot into the F8 screen and disable driver enforcement I am able to get online.

I'm not sure if this is related or not, but regardless of how I boot, Windows updater and troubleshooters do not work.

I'd appreciate any help.

Answer:Asus recovery - Intel driver not signed (but worked before)

I'm having the exact same problem!! Please let me know if/how you got it fixed. Thanks!

3 more replies
Relevance 52.48%

Windows Vista x64 decided to implement a 'security measure' by which all drivers must be 'digitally signed' to be allowed to install and run. I have a program which is compatible with Vista and x64 bit operating systems, however as its drivers are not digitally signed I cannot run it correctly - I recieve the message 'Windows requires a digitally signed driver' and access to the driver is blocked.

Is there a method of bypassing this?

Answer:'Windows requires a digitally signed driver' - How can I bypass this?

When you boot your system hit F8 and you can bypass it there. You will have to do this every boot. There are a couple applications out there that will do this for you but the names escape me right now.

4 more replies
Relevance 52.48%

I have x220 with Windows 7 Pro 64 bit. Device manager shows under Storage Controllers "Ricoh PCIe SDXC/MMC host controller," but there is a yellow triangle with "!" and a Device Status Code 52 message "Windows cannot verify the digital signature for the drivers required for this device." I checked in C:\Drivers\WIN\Multicard and found two *.cat files--which, I understand, are required to confirm digital signature. Each of them (ridisk.cat and risdxc.cat) has a signed and valid certificate! So what is going on? Will the card reader work? Is there something wrong with how Windows 7 is treating the Ricoh driver, which I downloaded from the Lenovo site? Why should I be getting this grief?













Solved!

Go to Solution.

Answer:Ricoh card reader driver-not digitally signed?

Hello,
 
Perhaps the driver is damaged?
 
Try deleting the Ricoh PCIe SDXC/MMC host controller from the Device Manager and then restarting the computer in order to let the Device Manager re-detect it and re-install the device drivers.  Does that solve the problem?
 
Regards,
 
Aryeh Goretsky
 

5 more replies
Relevance 52.48%

Hello, I have Windows 10 (64 bit) and all the latest Windows + Lenovo updates. The SSD's are Samsung 850 EVO (system) and Samsung 840 EVO (data). Since a few weeks ago, I started seeing a pop-up message, whenever I boot the computer. It says that "A digitaly signed driver is required". Also, the Samsung Magician software reports, that AHCI Mode is deactivated and SATA Interface is N/A. Does that mean that my system is not running on full performance? And is there are solution for these issues? Thank you! 

More replies
Relevance 52.48%

Hello,
I'm at my wits end. Anyone who can help would be my hero.

Acer 5253 laptop, Win7 Home Premium 64bit SP1, AMD C-50.

Trying to use a USB mouse. I have 3 logitech mice. None work because hidclass.sys and hidusb.sys are not digitally signed. If I f8 and disable driver signing enforcement, all 3 mice work, so I'm pretty certain that's the issue.

Tried "Update Driver" via device manager. Windows determined that I already had the best driver and wouldn't do anything.

Logitech does not furnish drivers for Win7. They rely on the native drivers.

Acer does not furnish mouse drivers. They refer you to the manufacturer of the mouse.

Tried copying the files in question from a 64bit machine that showed them to be digitally signed. Renamed the ones on my machine and pasted the ones from the "good" machine. Resolved nothing.

chkdsk /r found problems and repaired them. Didn't help.

sfc /scannow found problems that it could not resolve. Looked in CBS.log and found no references to either of the sys files in question. No resolution.

System Restore only had one restore point, and it was from 2 days ago. Problem was already noticed by then. I suspect that it's been this way since I purchased the laptop a couple of months ago anyway, but if there had been a restore point back at the very beginning, I'd have tried that.

I don't know much about digital signing of drivers. I've seen in a couple of threads that I might be able to sign the drivers myself, ... Read more

Answer:Windows mouse driver files not digitally signed

Mike

Obviously many more problems than just the mouse driver.

You can use earlier drivers (ie from vista, or even XP) if you install them in compatibility mode
[right click the installer>properties>compatibility>chose OS]

The other system problems need a repair install.

4 more replies
Relevance 52.48%

I tried to install Ati tray tools, I got the "signed driver" error notice, so I reboot press F8 and select Disable Signed Driver Checking and try to install again. Same error

I tried bcdedit and still doesn't work

Using Vista64 business SP1
 

Answer:Disable Signed Driver Checking doesn't work

There is a hotfix you have to uninstall

Uninstall hotfix KB938979 and then you should be able to disable driver signing via the F8 method, or the BCEdit method...
 

13 more replies
Relevance 52.48%

OK, I have come across 3 methods to disable driver signing with the bcdedit program on various websites:
bcdedit.exe /set testsigning on/off
bcdedit.exe /set nointegritychecks on/off
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS

What are the differences between them and which one should I use? Oh, how do you re-enable driver signing for the DDISABLE_INTEGRITY_CHECKS method, if I use it?
 

Answer:need help with enabling and disabling signed driver enforcement in vista 64

I'm using the last one and to re-enable it type: bcdedit /deletevalue loadoptions
 

2 more replies
Relevance 52.48%

Hi all, Following device:ThinkPad E531Graphics: Intel HD 4000System: Win7 Pro Following problem:1) Approx. 2 month ago a windows update caused a problem with the hdmi at my laptop. There was no connection to the TV possible anymore (I tried the TV, the cable and the hdmi device already).2) I installed a new driver (origin: Lenovo support page). Result: Windows messages that the driver is not digitally signed...Hence, the device "vga save" was set. What I've already tried, everything as admin:1) look for older drivers: Got only one and it didn't work2) Tried to install a driver directly from Intel: Didn't work3) Tried to disable the signing (GPEdit.msc -  code signature ...). Here I had the problem that I even have no line with the code signature to set the ignore property4) Tried to install the drivers (Intel and Lenovo) in the testmode. The waring message about unsigned drivers came5) Tried to create a certificate. Here the cmd said the command is not known.6) Tried to install the drivers (Intel and Lenovo) after setting the "TESTSIGNING" off (BCDEdit). The waring message about unsigned drivers came My question:Any ideas or similar experiences?I can not believe that the Lenovo or Intel drivers are not signed. But why Windows does not accept them?Is the available update to Win10 an option? Generally: Failure F40 (the failure is 40 cm in front of the monitor) is not excluded  Thank you very much in advance.Regards,Stefan 

More replies
Relevance 52.48%

No, I'm not asking, how to... I'm telling you how to

In a shell with admin rights, enter:

bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS

and yes, it's DD... no typo. Reboot and enjoy.
 

Answer:Disabling signed driver enforcment in Vista x64 final

What? Don't you know Microsoft knows what's best for you? How dare you try to think for yourself!
 

24 more replies
Relevance 52.07%

Hi.I am having a Z580 (Windows 7 65 bit home premium) laptop.Recently I am experincing many problems with my wireless adapter.After a few seconds of switching on, wireless symbol will show "Limited Access". I will try troubleshooting, but the system will hang and i have to force it to shutdown.So I have un-installed the wireless driver and re-installed it. But now the same "Limited Access" happens and when i troubelshoot, (Reseting wireless adapter) the adapter goes off and it is shown that "Adapter is experiencing driver or hardware related problems". When i looked into device manager it is shown that ""This device cannot start .Code10"". Also when i checked the details, it is showing that "'the driver is not digitally signed"".Please help me solve this issue asap.

Answer:Wireless Adapter is not working (Code 10) "Driver is not digitally signed"

Update : If i put laptop in sleep after wireless becomes "Limited access"  after 10-15 mins if i reopen it, wifi is connected normally and it works! but for a period less than 10 mins.. After that again "Limited access" is coming and nothing will load!!! it is becoming a serious issue plz help

1 more replies
Relevance 52.07%

This is more of a bug report rather than a question.


When installing the latest version of Message Analyzer 1.4 (Build 4.0.8110.0) on a clean installation of Windows 10 Pro (Build 14393.222), it shows an error saying 'A Digitally Signed Driver Is Required' Message Analyzer -- WFP Callout Driver.
I'm guessing maybe due to the new driver signing requirements in Windows 10 1607 Anniversary Update...
https://blogs.msdn.microsoft.com/windows_hardware_certification/2016/07/26/driver-signing-changes-in-windows-10-version-1607/

More replies
Relevance 52.07%

Hi,

This is my first post on these forums, so please excuse me if anything is wrong.

Details of the problem: I have a Sony VAIO laptop that runs Windows 7 Home Premium x64. I recently downloaded the same version from digital river that has SP1 included and installed it on my laptop. I installed the drivers that I had downloaded from sony's esupport site which went fine. After I rebooted and tried to install the rest of the drivers, I started getting the Code 52 error: Windows cannot verify the signature of this driver. I've seen that every driver can be installed immediately after the system has been booted the first time (after a clean install). Once rebooted, it starts giving the code 52 error. I can't install my iPhone drivers (through iTunes) or PS3 utilities because of this. I'm wondering what changes during the first reboot. I must also say that these very same drivers were used on the previous build of Win 7 HP that I was using except that it did not have SP1 integrated.

Has anyone had a similar experience? I know that the digital signature check can be disabled using bcdedit.exe but I want Windows 7 to work the way it should: it should stop me from using unsigned drivers while installing signed drivers correctly. Does any one have any clue to what's going on with my Win7 on my laptop?

Answer:Driver Digital Signature error when using signed drivers (Code 52)

Hi ajayav, Welcome to Sevenforums.

Boot into Advanced Boot Options and disable driver signing checking.

The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

Disabling driver signature enforcement has helped a lot of users in fixing the issue.

You may also delete the USB "Upper Filter" & "Lower Filter" Entry and check if that helps.

Before we go any further, please first backup the Registry.

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

1. Click “Start”, type “regedit” (without quotation marks) in the “Search” bar and press Enter.

Note: If UAC (User Account Control) pops up, please accept it.

2. Right click “Computer” (the root node) in the left pane, click “Export” under the “File” menu, choose “All” under “Export range”, and select “Desktop&... Read more

5 more replies
Relevance 51.66%

So hey all,

I was watching a movie on my laptop 2 days ago but suddenly the right click stopped working! I tried to reinstall the driver and it worked for a little bit but it kept on spamming the right click menu!

But now it won't work at all. Why did that happened?

Answer:Satellite C50-A560 - right click has suddenly stopped working

can anyone help? :) ty

7 more replies
Relevance 51.66%

I have a Cannon power shot A560 that has a new set of AA batteries in it
but it will say "change batteries" when I turn it on.

So with I do is pull out a small watch battery in and put it back into the
cammera and it will normlly true on for a 5 or 4 time then it will
again say "change batteries". What is the problem here? Do I
need a new watch battery in it? The battery that I pull out is
a pansonic C 1200.
Thank you,
 

Answer:Cannon Power Shot A560 say Change Batteries

you may need a new watch battery - how old is it ?
 

3 more replies
Relevance 51.25%

windows 10 version 1607
after clean install ?
Samsung magician 4.9.7

Answer:does samsung magician show ahci disabled with signed driver error on

Does on mine, even though speccy etc all show it being on, must be a magician error.

14 more replies
Relevance 51.25%

H5321GW didnt have proper signed driver for Windows Server 2016. Why? On windows 10 the driver is working (Version 8.2.5.0 from 6/11/2015), i saved and pushed into the Windows Deployment System, but after under Windows Server 2016 didnt work, because of signature missing. When will be available updated driver for the mobile broadband?? .... And Bluetooth connect to PAN also dont have. (BTH\MS_BTHPAN)


























H5321GW.JPG ?73 KB

More replies
Relevance 51.25%

windows 10 version 1607
after clean install ?
Samsung magician 4.9.7

More replies
Relevance 51.25%

When I downloaded/installed Everest Home Edition I got and error message shown in the attached image although Everest seems to work fine. How do I make Vista accept non-digitally signed drivers that I trust?This is on my HP 6715b in specs, Vista Business x64[regaining space - attachment deleted by admin]

Answer:Everest Home Edition download. Message = driver not digitally signed

To be on the safe side, reckon the download was ruined by some kind of malicious software. Perhaps on your system.Ask a friend to download it and see if he gets the same thing.EDIT:Just did download from the majorgeeks. Works on both XP and Vista. Scanned with Avast and no threat found.You have malware. Or a bad download.

8 more replies
Relevance 50.84%

Hi all,
I am wondering how do I digitally sign my driver so that it can be installed on a Win7 Ultimate SP1 in a VMWare virtual machine. I have used Visual Studio 2013 to sign my driver and cat files using a certificate I obtained from GlobalSign. Both of these
files passed the signtool check, but when trying to install in this virtual machine it generates an error code 52.
Thanks in advance for any help

More replies
Relevance 50.84%

I have a problem with a RAID device. vista wont update it from the internet automatically so i used the my motehrboard cd to install it off. everything went ok and it installed well. the only problem was that when vista booted back up the driver wasnt digitally signed so vista wouldnt boot up into windows. i had to take out the hardrive and put it in as a slave and delete the files through xp. does anyone know where i can get this driver from that has been digitally signed?

Answer:silicon image sil3114 sata raid controller digitaly signed driver

Originally Posted by UKMach


I have a problem with a RAID device. vista wont update it from the internet automatically so i used the my motehrboard cd to install it off. everything went ok and it installed well. the only problem was that when vista booted back up the driver wasnt digitally signed so vista wouldnt boot up into windows. i had to take out the hardrive and put it in as a slave and delete the files through xp. does anyone know where i can get this driver from that has been digitally signed?




HI.
This it?s the good driver > http://www.siliconimage.com/docs/Si3..._x64_15100.zip < only you need install and then vista x64 uptade whit the new version.

Regard

2 more replies
Relevance 50.84%

Dear all, I don't find this driver on the Lenovo website.Please, could you help me to find the link? Thanks a lot,Kind regards,Manu

Answer:unable to find the signed driver ACPI/IBM00068 for T400 6475-U2G Win7 64x

i have the same problem but didn't get an answer...http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/ACPI-LEN0068-5-amp-2890D699-amp-0/m-p/93269...

2 more replies
Relevance 50.43%

Hello))

I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

Answer:Window 7 64 bit cannot install driver sotware(canon printer driver)

Disconnect and turn your printer off, Uninstall all the printer software, drivers and reboot. Disable any antivirus/antimalware software you may be running and then start the Canon installer again, Do Not Connect the printer until the software asks you to connect the printer and then turn it on. The installer will then search for the printer and will tell you if it finds it. Any antiviirus/firewall or anti-malware software running might block the driver installation so be sure you have turned all of that stuff off

8 more replies
Relevance 50.43%

Hello))

I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

Answer:Window 7 64 bit cannot install driver sotware(canon printer driver)

Hi did you try a system restore to a point when it did work.

2 more replies
Relevance 49.61%

This driver (or part of it) is not digitally signed, hence during silent install in SCCM TS Windows 7 x64 it will "hang" waiting to accept the unsigned driver (NOT during Apply drivers, but Sequence that runs setup.exe - I install ALL graphics drivers this way!)

http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=D4HM1
Had top revert to previous version
Intel HD, 5300, 5500, 6000, 515, 520, 530, P530, Iris 540 Graphics Driver, 20.19.15.4390, A05
to be able to do silent install!
Somebody else might have noticed?
Seb

More replies
Relevance 47.56%
Question: Canon Software

I never had so much trouble installing the software as with Canon.. When i did first install, software couldn't find my camera. So I thought, I did something stupid, unistalled it and cleaned the system from all leftovers with RegCleaner and YourUninstaller..Now you would think, OK.. Let's do it again.. No way.. When you try new install, it says everything is already installed and there's nothing you can do to convince the stupid computer that it ain't so.. Did any of you guy's have same expirience with Canon?Before it was easy.. You drop Twain modules in PS Import/Export stick the card in card reader en voila.. It seems times are changed.. If anyone have good tip, I'd appreciate to hear from you.. Thanx.. Edited;I see I posted it in wrong section.. But it was installed on 98SE..Mod Edit: Moved to "other applications" where it will get more attention. jgweed

Answer:Canon Software

I was going trough my registry and found this..
HKEY_LOCAL_MACHINE,Software,Canon, Canon Camera TWAIN Driver, EOS-1D Mark II

Do anybody think I can delete this map manually, or is there other method of doing this? Thanx in advance...

3 more replies
Relevance 47.15%

Hello everyone.

Recently I kept getting this popup saying *A digitally signed driver is required*

How do I find out what program is using this unsigned driver to remove this popup?

Answer:How to solve "digitally signed driver is required"

Any warnings in Device Manager ?

0 more replies
Relevance 47.15%

Hello everyone.

Recently I kept getting this popup saying *A digitally signed driver is required*

How do I find out what program is using this unsigned driver to remove this popup?

Answer:How to solve "digitally signed driver is required"

Any warnings in Device Manager ?

more replies
Relevance 46.74%

Problem downloading canon photo software for powershot 720IS on XP system.
Once downloaded Outlook will not open. Also box pops up that indicates Business Manager must close down.
Need help.
Thanks
 

Answer:Canon Photo Software

What is the "canon photo software"?
Is the "...must close" error box, the only one you receive? Does it (or any other errors) not specify any more details?
 

8 more replies
Relevance 46.74%

Hi

Have installed Canon MF4690PL vista drivers and run update for win10 which showed drivers as correctly loaded in device manager.

Have installed Canon Toolbox for scanning from this device. There isn't much wrong and I'm sure that I just haven't found the correct path to resolution.

The scanner works from within the toolbox software and produces an image a set, either pdf or tif etc, tot he set location. However it does not seem able to display the scanned file in the relevant application, instead giving an error that the application cannot be started. See screenshots.

Can anyone shed any light on what settings may be causing this?



Please NOTE: the same happens with adobe pdf scans, will not open adobe pdf reader to display the scanned file.

Answer:Canon Toolbox Software

Go to canon's site and download your drivers from here, and any software you need.
i-SENSYS MF4690PL - Canon Europe)

5 more replies
Relevance 46.74%

I just bought a Canon S5 IS camera, which comes with imaging software.

I also have a HP PSC 1610 all-in-one printer, which has imaging software installed already.

Is there any problem with having both of these programs installed? Or should I remove one first before installing the other?

There is no other camera software on the computer at all. This is my first camera.

Thanks,
RootbeaR
 

Answer:Canon & HP Imaging software

I have a HP Puter, HP camera, two Sonys and a HP AIO 1610xi

I have removed all but the basic 1610 scanner software and will not install any other camera software.

Instead .. I have installed the freeware Irfanview for all my Camera Viewing and basic Editing work ...
and it also runs my 1610 Scanner.
http://www.irfanview.com/

For any advanced image editing .. I would recommend Photoshop Elements 6.0

Not familiar with Canon .. but you could probably install it and use either HP Image Zone or Canon if you want.
But you don't need any Camera software to get your pics from the camera.
 

3 more replies
Relevance 46.74%

Hi,

I will start from the beginning. The other day I was trying to upload pictures from my camera to the computer using the canon software (ZoomBrowser EX). For some unknown reason it was unable to "find" the camera (it was working before this). After a while, I gave up and uninstalled the program. I tried to reinstall the program but it failed part-way thru. and now i am unable to uninstall it again, and i cant install it because it says a previous version already exists. Any ideas? please help I am totally lost.

thanx
 

Answer:canon software problem

16 more replies
Relevance 46.74%

Does anyone have any experience with NetSpot? I can't to seem to find any documentation on it, well at least not from official sites.
 

More replies
Relevance 46.74%

Hi all,

My dad recently picked up a Canon MV800i MiniDV video camera. Got the FireWire lead and ports available, but without the installation CD. Drivers are not a problem (Windows 7 seems to have some native drivers), but I need help finding the software to transfer from the camera to the computer.

I have gone through the Canon site through and through and pulled up nothing, and sites like download.com and MajorGeeks do not seem to have the program either. Does anyone know where to find this software? Is it freely available (ie freeware)? Thank you in advanced.
 

Answer:Canon video software

Did you try Windows Movie Maker already ? It has a capture video wizard.
Click Start, then All Programs and WMM is listed.
 

3 more replies
Relevance 46.74%

Hi, my canon scanner comes with a program that automatically converts the scanned documents into pdf format. Recently I got an HP 3 in one printer-scanner and I'm just wondering if there's a way I can use the canon program to convert the documents scanned by the HP scanner.

Thx.
 

Answer:Canon scanner software

Not sure that would work, you could always scan then print to pdf with the program below, I use and think it's great.

http://sector7g.wurzel6.de/pdfcreator/index_en.htm
 

1 more replies
Relevance 46.74%

my digital ixus 300 software(canon zoom browser) is very unstable on my system. everything is ok until i try to delete photos. then the system shuts down and gives me error codes.
i uninstalled then re-installed but the problem still the same.
i guess i removed everything when i uninstalled the 1st time but there were still old photos when the installed the 2nd time.
is it possible to find out if there is a software conflict on the system.
thanks
 

Answer:canon ixus 300 software

Hiya

When these error codes come up, are there any Details Buttons? If so, can you copy/paste the contents. If there aren't, can you tell us the error codes?

Lets have a look at your startup Programs. Go to Run and type MSINFO32. If you get an error, Programs | Accessories | System Tools | System Information.
On the left choose Software Enviroment, then Startup Programs. Copy/paste the list here. If you cannot, Action | Save as Text File and copy/paste that way.

Also, what is your OS?

Regards

eddie
 

2 more replies
Relevance 46.74%

Hi

Have installed Canon MF4690PL vista drivers and run update for win10 which showed drivers as correctly loaded in device manager.

Have installed Canon Toolbox for scanning from this device. There isn't much wrong and I'm sure that I just haven't found the correct path to resolution.

The scanner works from within the toolbox software and produces an image a set, either pdf or tif etc, tot he set location. However it does not seem able to display the scanned file in the relevant application, instead giving an error that the application cannot be started. See screenshots.

Can anyone shed any light on what settings may be causing this?



Please NOTE: the same happens with adobe pdf scans, will not open adobe pdf reader to display the scanned file.

Answer:Canon Toolbox Software

Go to canon's site and download your drivers from here, and any software you need.
i-SENSYS MF4690PL - Canon Europe)

10 more replies
Relevance 46.74%

Mod Edit:  Split from http://www.bleepingcomputer.com/forums/t/485057/eos-utility-has-stopped-net-framework/ - Hamluis
 
IIIPGCIII, I'm having the identical problem.    myerror messages are identical with minor number differences in items 2,3 &7 on the initial error report.  the event viewer is completely identical.   Your OS version is completely identical.    
 
I only have one .net framework ver 4.5.1   have done the repair with no change.   I've installed the latest updates from canon, uninstalled the apps, run a registry repair all to no avail. 
 
One other symptom.    when the app starts a windows warning comes up "do you want to allow the following program from an unknown ....to make changes on this computer"   that DID NOT happen earlier when the app worked perfectly.   I suspect some kind of windows security update has broken things.    Some other obscure applications I run also show the same warning.
 
I looked for a *.ini file or something where the setups are stored-- can't find one.   is the app storing setups inside itself( self modifying code)?   or is it storing setups in the registry?  
 
I talked so some poor guy running the canon help desk.   He says the app was written by an unknown Australian company, couldn't give me the name.   Next time I call them I'm going to press him harder to provide the name.  He claims n... Read more

Answer:Canon Software Issues

Have you disabled your antivirus and any other security software that would interrupt a driver installation? Also try running the EOS installer in Administrator mode. (right click on the installer. select properties in the drop down box. From the properties menu, select Compatibility tab. Check the box at the bottom that states "Run this Program as Administrator" Click o.k.)

4 more replies
Relevance 46.74%

Hi,
I just got a used thinkpad T41 with Windows XP sp2 and am trying to install all my software. My Canon camera software Zoombrowser and other bundled software CD shows up when I place it in the drive. But when I click on the box to install the software, the cd starts spinning but after 15 secs stops, and nothing gets installed. I have tried using Start, Run , setup.exe and the same thing happens.

This is also occuring on other software I am trying to install.

Did not have any trouble installing MS office...

Jim
 

Answer:new Canon software will not install on XP

15 more replies
Relevance 46.74%

Only been here an hour and already on to my second problem, lol.

So my only other problem is one little hardware adapter that has 64bit drivers... but they're not signed.

Is a "Syba" Serial to USB Adapter (SY-USB-S)...

basically I need to use it so that my battey backup can talk with Windows and give reports on power spikes etc... as well as control the shutdown of windows when I'm not around if there's a power outage.

Now, it's not a huge deal as the battery backup will still work of course, but the extra features won't work until Windows can communicate with it. Unfortunatly the backup only as a serial connection (and my motherboad doesn't) so I'm forced to use the "Serial (RS232) to USB" adapter.

So I'm wondering a few things.

1) can I force Vista x64 to use the unsigned driver from the company?

2) can I trick Vista x64 into thinking the driver is signed? (or someone mod the drive to that it is signed by me?)

3) Anyone know of a signed driver from another company that will work with this item? I assume a few companies use the same chip inside the device. All it does is make a bridge from USB to serial so it's a pretty simply device as well.

4) Anyone know of another Serial to USB adapter that has singed drivers that I could purchase to replace the current one?

Thanks again for any advice or help,
TK.

Answer:Vista x64 Driver "not signed" question...

Hi TK,

This will allow the unsigned driver to run in Vista. Hope it works for you.

- Allow Unsigned drivers to run

Shawn

10 more replies
Relevance 46.33%

Can anyone pint me in the direction for the Canon software for a Canon Pixma IP5200. I want to be able to once again print onto DVDs but cannot. I have aprint driver installed that works, but the Easy print toolbox and CD label print software from Canon won't install
Thanks

Answer:Canon Pixma software and drivers

I used Vista Canon drivers for mine... Running them in Vista Sp1 compatibility mode and installed as administrator... Worked for me.

3 more replies
Relevance 46.33%

Second half of message[E:\software\SDI\english\PANEL1.INI]ParseIniStatus: COMPLETED CheckCIGRegistration> CIG_IC_SHARED_KEY : 0 CIG_IJ_SHARED_KEY : 0[E:\software\SDI\english\PANEL1.INI]ParseIniStatus: COMPLETEDWelcome.InstallMode : CUSTOMSoftware.Name : Digital Photo ProfessionalSoftware.Name : Digital Photo Professional RAW Development LibrarySoftware.Name : Image handling libraryTarget.Path : C:\Program Files\Canon\Target.DiskCapacity : 108914MBTarget.DiskFreeArea : 28042MB[E:\software\DPP\common\install.ini]ParseIniStatus: COMPLETED[E:\software\DPP\english\install_lang.ini]ParseIniStatus: COMPLETED[E:\software\DPPLIB\COMMON\INSTALL.INI]ParseIniStatus: COMPLETED[E:\software\Image Handling Library\COMMON\INSTALL.INI]ParseIniStatus: COMPLETED[E:\software\Image Handling Library\english\INSTALL_lang.INI]ParseIniStatus: COMPLETED[E:\software\DPP\common\install.ini]ParseIniStatus: COMPLETED[E:\software\DPP\english\install_lang.ini]ParseIniStatus: COMPLETED[E:\software\DPPLIB\COMMON\INSTALL.INI]ParseIniStatus: COMPLETED[E:\software\Image Handling Library\COMMON\INSTALL.INI]ParseIniStatus: COMPLETED[E:\software\Image Handling Library\english\INSTALL_lang.INI]ParseIniStatus: COMPLETED[Digital Photo Professional]Setup.StartTime: 21/12/2009 11:38:23CustomDLL.FileName: E:\software\DPP\COMMON\DPPCustomInstall.dllCustomDLL.ReturnValue: Install_CheckExistingVersion 0x00000000ExistingVer.Number: NONECustomDLL.ReturnValue: Install_AfterRemoveExistingVersion 0x00000000CustomDLL.ReturnValue: ... Read more

Answer:Can't load Canon software - Part 2

XP Home SP3 on both

2 more replies
Relevance 46.33%

I am running windows 7 home premium. I have a Canon MX860 printer and the software that came with for the pc interface is some how blocked. I contacted Canon and they had me set up another user account and the software worked fine. They suggested there is something in windows that is blocking it, perhaps something to do with permissions?
Any help would be appreciated
Thanks
 

More replies
Relevance 46.33%

The printhead on my Canon iP4500 has failed after less than 18 months (fine white lines all across photos, no amount of head cleaning will cure it). A new print head costs nearly as much as a new printer!As it is less than two years old, Canon Service Centre have offered to take it in part exchange for the latest model, the iP4600, at a bargain price.According to Canon.co.uk product comparison, the 4600 seems identical to my 4500 except for two important things:(1) the 4600 ink cartridges produce considerably fewer pages / photos than the 4500, so presumably the running costs will be much more. Please can any 4600 user comment on this?(2) I need to print CD / DVD discs. Under "Software Included", Canon's comparison says the 4500 includes "CD-LabelPrint", but the 4600 apparently does not include this. Will I have to buy additional software to print onto CD / DVD on the 4600, or will it be OK?Any advice will be greatly appreciated.

Answer:Canon iP4600 - must I buy software to print CDs?

The IP4600 does include the label print software .From click herePrint on DVD/CDManaging your data storage is easy as you can personalise your DVDs and CDs for business, friends and family. Simply print direct onto the surface of the printable DVD or CD. CD-LabelPrint software lets you create layouts by adding your own text and images.

10 more replies
Relevance 46.33%

I have a new canon rebel xt and have followed the software installation guide and I'm getting 'windows was unable to located the software for this device.
Can anyone help solve this please?
I use windows ME
 

Answer:need help with canon rebel xt software installation

6 more replies
Relevance 46.33%

sponsor said:

what should I consider before buying a digital camera ?Click to expand...

Hi everybody. Can someone of you help me with this problem?
I bought a new canon powershot A70 camed with canon utilities cd and Arc software cd. the second one Arc software installas very quick but the secind one does not.The cd is not broken it is kept in very well condition.
My computer has Win XP proffesional SP1 on A Compaq Evo N800v laptop. It was installed once and uninstalled after some canon software updates from their web site.
The error shown when i tryed to install is "file transfer error, installation failed" and stops. i have a snapshot of the problem.
Please email me at [email protected] or yahoo at adriancristinac or hotmail at adrianraceanu
Thank you very much.
Respectfully Adrian.
 

Answer:Canon original software problem

welcome adriancristi

I split your post from the other thread...
Always better to start a new thread rather than tag onto another...

Have you tried uninstalling all the related Canon software and starting fresh as per the manual?

buck
 

1 more replies
Relevance 46.33%

I fitted a second hard drive today all successfully. I deleted my Canon camera software from the original hard drive using the unistall software that came with it so I could install it afresh on the new drive.When I run the installation CD I set the destination folder to one I've created on the new drive but half way through installation it tells me its already installed and won't continue.The 'add/remove' utility lists the software still although it doesn't display a file size, and a search on 'My Computer' doesn't show anything from Canon.How can I find the offending files still remaining so I can delete them to reinstall the complete software?

Answer:problems re-installing Canon software

Install and run this program and delete anything it finds in applications.click here

2 more replies
Relevance 46.33%

I have recently discovered that my Canon Lide 30 Scanner will not function, because I think there's a problem with the software.I recently installed Windows SP2 and I suspect that this could be the cause. I do have the installation disc, and I also tried to download the latest software, but still with no joy.Where would I look to see if there's a patch to upgrade the software for the Lide 30, if SP2 is installed.Cheers.

Answer:Canon Lide 30 software problem.

have you tried this site click here

6 more replies
Relevance 46.33%

How can download the software for Canon printer LBP 2900B for window7 with 64 bit

Answer:How can download the software for Canon print

From the manufacturers home page.http://support-in.canon-asia.com/P/...Click Here on HowTo ask good Question to get best HelpLet us know, if the problem is solved !!!

2 more replies
Relevance 46.33%

I have a Canon i350 printer that has a very cool feature in the software that came with it called 'Simulate Illustration'. It's in the 'effects' tab of its properties. It makes the photo look like a pencil drawing. The two different settings it has are just perfect-no thinking about it. I am getting rid of that printer and wondered if its possible to somehow use that feature printing from an HP Photosmart 8250. I don't want to delete that software until I know. I use PaintShop Pro and have PhotoShop also. If anyone knows of a quick way to have one of those set to do as good of a job, without having to do all the adjustment levels etc., please let me know.
Thanks!
 

Answer:Switching printer software HP to Canon?

6 more replies
Relevance 46.33%

I've been trying to load software that came with my new Canon camera. All goes well until it gets to loading a programme called Digital Photo Professional when it stops part way through with the following message (I know it's a bit long but someone might be able to pick something from it)The same problem happens when trying to load Photoshop CS4. The same disks load quite happily on my laptop.[System Information]Installer.Version : 1.6.2.14Installer.Path : E:\software\install\common\install.exeSystem.CPUNum : 1System.Architecture : 0System.ProcessorLevel : 15System.ProcessorRevision: 0x1F00System.PhysicalRAM : 2047MBOS.WinNT : TRUEOS.64bit : FALSEOS.Major : 5OS.Minor : 1OS.Build : 2600OS.ServicePack : Service Pack 3OS.SuiteMask : 0x00000300OS.ProductType : 0x00000001OS.WinDir : C:\WINDOWSOS.LangID : 0x0809System.DiskCapacity : 108914MBSystem.DiskFreeArea : 28049MB[CONFIGURATION][E:\software\SDI\COMMON\master.ini]ParseIniStatus: COMPLETED[E:\software\SDI\english\Master_lang.ini]Error.Description: Ini File Open Error ( 1 )ParseIniStatus: ERROR[E:\software\SDI\english\Region.ini]ParseIniStatus: COMPLETEDRegionDlg.RegionCode : europeCountryDlg.CountryCode : GBLangDlg.Lang : ENGLISH[E:\software\SDI\COMMON\master.ini]ParseIniStatus: COMPLETED[E:\software\SDI\english\Master_lang.ini]Error.Description: Ini File Open Error ( 1 )ParseIniStatus: ERROR[E:\software\SDI\english\Region.ini]ParseIniStatus: COMPLETED[E:\software\DPP\common\install.ini]ParseIniStatus: COMPLETED[E:\software\DPP... Read more

Answer:Can't load Canon software - Part 1

Try asking your question at...click here

1 more replies
Relevance 46.33%

Have just got new computer running XP Home Edition.Printer is a Canon LBP-660. Downloaded driver from Canon website but it will not load as the error message states that I need to be using Windows 95 or 98. Yet it worked on my old computer running XP pro. Is there another compatible driver I could use? Any help greatly appreciated.
 

Answer:Canon LBP-660 driver

Have you tried the Windows 2000 drivers: http://software.canon-europe.com/so...ndows_nt_40__2000_r112s4954.asp?model=LBP-660
 

1 more replies
Relevance 46.33%

I have a Canon LBP 660 printer for which I need a driver.  This model is not included in Canon's list of downloadable drivers.  Can anyone point me at a source?

Answer:Driver for canon LBP-660

You didn't mention what OS your're running. Maybe this will help:http://software.canon-europe.com/Printers/Laser_Beam_Printers/LBP660542.aspGood luck.  

1 more replies
Relevance 46.33%
Question: Canon Driver

It seems like this is an impossible task.

I work at a non-profit (read: no budget) and our 3 computers crashed. We got a new laptop donated and everything is installed on it. However, we cannot find a driver for our copier:

Canon GP 200

Which supports Windows 7 Home Premium 64 bit

HELP!

We cannot afford a new printer and everything is set aside from this... anyone?

Answer:Canon Driver

Hi sunnyslope, Welcome to the forums, I'm afraid doing a quick search failed to find a driver for the printer after 2005 and that was for win2000/XP Canon U.S.A. : Support & Drivers : GP200 you may be able to try to install these drivers in compatibility mode

9 more replies
Relevance 46.33%

I am using W& RC and cannot get my Canon Lide 80 scanner to work.I`ve tied loading new drivers but get a message that I need a WIA driver.Canon don`t seem to be that helpfull when questioned about W7 drivers.Would the retail version of W7 have this problem solved?It seems that although W7 has a large amount of drivers in it, it doen`t seem that helpful if I can`t load original software such as Canon scan toolbox.When I used Windows 7 upgrade advisor it showed no problems with my peripherals.Can anyone explain please.I don`t want to get the retail version if I`m going to have problems.

Answer:Canon WIA driver for W7

found this that says what to do for the message you are gettingclick here

3 more replies