Computer Support Forum

Document Conversion.....

Question: Document Conversion.....

I have discovered a couple of floppy disk's in my drawer that have files written from a word writing prog I had in the mid 90's. For the life of me I cannot remember the prog. All I can say is the icon is a sheet of A4 paper, top right corner folded over, letter "A" in bottom left corner with the business end of a fountain pen touching the "A". The file extention is "write document". It would also appear they are password protected so current MS Office Word cannot convert. Can anyone suggest the prog itself with link if poss (no sure it will work on current spec system tho) or a good document converstion prog with link if poss. Many thanks to anyone who can help....Fox

Relevance 100%
Preferred Solution: Document Conversion.....

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Document Conversion.....

These files may have old ms word or wordperfect extensions but I can't be sure. Anyone in the know. TIA...........Fox

10 more replies
Relevance 59.04%

I have a word document. In the menu bar I've 'Adobe PDF'. On clicking on 'Adobe PDF' I can see an item 'Convert to Adobe PDF'. On selecting this item, I'm asked to save the 'PDF' file but after a few moments my word document closes and the PDF file is also not created.Thanks for your help in advancehttp://www.familycomputerclub.com

Answer:Word document and conversion to PDF

What version of Office are you using?

2 more replies
Relevance 59.04%

I did some homework recently on my brothers computer using word, and saved it as a word file. That was rather stupid because I don't have word, and opening the documents with any program i have results in strange symbols randomly distributed throughout the document. Anyone know of a good conversion program, or anyone have word and want to convert them for me?
Thanks!
 

Answer:Word document conversion?

The free version of office is also known as OpenOffice.

www.openoffice.org

It's a 65mb download, I believe, and has most of the same features of Word, Excel, PowerPoint, etc.

It's open source, so it's free. Almost all linux users use it.
 

1 more replies
Relevance 58.63%

I have a CD that has the entire contents of a 250mb harddrive from a Macintosh Quadra 700 running OS 7.5.3 on it.

I need to take all of the documents on here (all wordperfect for mac) and open them on a windows xp machine running office xp. i think there are converters right in word that should be able to handle this, but when i open any of the documents its just gibberish.

I think the hang up is that "Disk Doubler" was installed on the mac, and i think the files are all disk doubler files (are those like winrar or winzip archives?)

im not the most experienced guy on a mac (im fine on OSX, screwed everwhere else), but is there a program that runs on windows that could un-"disk double" these files and then i could open them with word? Is there a better way to do this?

second part of this question is:
I have several mac hard drives from older macs that have tons of pict files on them, is there a way to batch-convert all of these to jpgs? I can get the files off of the drives and into a mac G3 with a external scsi port and a scsi enclosure. can they be converted either on that mac, or on a windows machine?

Thanks in advance for your help!
 

More replies
Relevance 56.58%

Ok, here's the dilemma: I have various images that are named such as 001.JPG all the way up to the last number which can be something like 250.JPG.

Is there a way to take all that and combine into a single PDF file as an automated batch process or something similar and that each image is its own page?

The same goes with various text documents in either DOC or TXT format.

I have Acrobat XI, but doesn't look like it has that feature (that I can see), and have Foxit but haven't delved too deeply into yet.

Thank you for replying.
 

Answer:Does this exist-- A batch document/image to single PDF file conversion?

I want to say you can do this with ABBYY PDF transformer but I dislike that company so much I don't suggest it.
 

6 more replies
Relevance 45.1%

At first, I don't need to recover my data, I just want my drive back to re-use it.
How can a format my usb drive including all boot sectors which sees to be locked/write-protected by bitlocker?

My problem starts with decrypting my drive by deactivting bitlocker on it by entering the valid password/recovery key. At 36% of decryption the process halts without reason. Now, I'm unable to access my drive or resume the process.

I tried...
    ...to format with windows
   ..remove with diskmgmt
   ... remove with diskpart
   ... repair-bde
   ... manage-bde
   ... ubuntu live cd
   ... mass production tool software, to override the whole stick

nothing worked. The only thing which worked was once the software M3 Bitlocker recovery Free, but just one time to access the locked partition. But, as mentioned I don't need to recover my data. With that tool I'm not able to wipe the drive.

That Bitlocker protects my data till the end is good, but that it breaks my data and my hardware in such a case is not fair.
How can I break the write-protection mode to finally wipe the hard drive?

More replies
Relevance 44.69%

I have a Dell Inspiron 6000 with a 1.5 GHz Pentium M processor, 2 GB RAM and Windows XP/Pro SP 2, InDesign CS3 (v. 5.0.1), and Word 2002 SP 3.

Problem description:

a) I have tried converting InDesign documents and Word documents with long hyperlinks to PDF. I have documents with some hyperlinks that are very long and require more than one line. The hyperlinks that I create in InDesign or Word that require more than one line look OK after conversion to PDF (using the Export command in InDesign), but, if I hover the mouse over the link in the PDF, all the characters in the URL on the second line are missing, and the link doesn’t work. I first discovered this using Acrobat Professional 7. Yesterday I downloaded a trial version of Acrobat Professional 8 (8.1.0), and I still have the problem.

Yes, I know I can create a hyperlink character style in InDesign with the “no break” feature enabled. However, that can result in appearance and text flow problems.

b) Furthermore, I tried to convert a Word document with a long hyperlink to PDF (using the Word Print command), and the same problem occurs.

To make matters worse, when I try to convert any Word document to PDF using the “Adobe PDF/Convert to Adobe PDF” menu item, I get this message:

“The Acrobat PDFMaker server could not be loaded. Do you want to run the installer in repair mode?”

I tried the repair mode. Then I tried it again from the Add/Remove Programs option in Control Panel. That did not solve either problem. R... Read more

More replies
Relevance 44.69%

Hi guys. Can anyone point me to where I can find a method to convert from a C++ CTime object to a SQL DATETIME field and back in C++ ado.net managed code? I've dredged everywhere for almost a full day and can find nothing on it.

Unfortunately the help offered for many areas of C++ by M$ is becoming painfully thin and new processes to me seem to be becoming harder to find out about.

Thanks.
 

Answer:Solved: Conversion between C++ CTime to SQL DATETIME conversion

It's ok now, I solved it myself. It turned out to be remarkably easy (once you know). CString is recognised intrinsically.

CString myString;
...
System::String^ strS = gcnew System::String(myString);
 

1 more replies
Relevance 42.64%

Hi Mr/Ms
I
flash
drive encrypted
with BitLocker 
I used
this
driver for three months my computer is broken I bought a new computer    when i was try my flash disk new computer its give me this  problem 
BitLocker Drive Encryption failed to recover from an abruptly terminated conversion. This could be due to either all conversion logs being corrupted or the media being write-protected
? know my passworrd but I do not know
the BitLocker
recovery key what can i do know pls some one help me 

More replies
Relevance 41.41%

When saving a Word 2007 document as a webpage (htm, html), an extra folder is automatically created besides the hmtl document itself. This folder contains background information like pictures, wallpaper etc. Is there a way to prevent that folder from being created in the first place? I've got Word 2000 on another computer, and when I save my word documents as html files over there, that extra folder is not generated. The only time that folder is created in 2000 is if my documents contain pictures, wallpaper etc. In Word 2007, it is created all the time, even though my documents are just plain text.
 

Answer:Solved: Word 2007, saving document as html document: how to get rid of extra folder?

Managed to find the solution, it was very simple after all. One has to save the document as a filtered webpage and click "yes" when a box pops up warning you that you will use certain featuers which are specific to Office2007, such as the background. Then the document will save without that extra folder and files.
 

1 more replies
Relevance 41.41%

I have two questions regarding documents created in Word 2007...

1) Can links be created within a Word document? For example, can I click on and item my table of contents and have the document jump to that particular section of the document?

2) Also, is there a way to make sections of the document hidden until the user clicks a specific word or graphic in the document?

I'd like to specify a particular instruction and include a "Show example" link that would make a detailed example appear for those who needed the extra help.

Thanks everyone!

Answer:Word 2007 - Links within a document? Hide/Show sections of a document?

If you created table of contents through References - Table of Contents, you can hold Ctrl and click on the item in that table, word will take you there. This feature is standard.

Also, to navigate inside document you can use bookmark option.
Insert bookmarks. Word 2010 Bookmarks
Then insert Hyperlink - in the window select second tab "Place in This Document" and choose your bookmark.

As for hiding parts of document, I do not think that is possible.
You can create that in HTML document with javascript, but not in Word document.

3 more replies
Relevance 41.41%

I am running XP and Word 2000 and Nortons. Word will crash if you leave the document open for a while (there is no specific time frame) and then select close (icon). The error - Microsoft Word for Windows has encountered a problem and needs to close. The details are: AppName: winword.exe
appver 9.0.0.3822
Modname: kernel32.dll
modvers: 5.1.26002180
offset 0001eb33

This has pretty much happened since I got this laptop. I have reformatted and reinstalled everything (due to another problem) and still have the same problem with word. I have used the same CD on other computers to install word and they do not have the same problem.

I use a variety of templates and plain documents in my work and can not pin point it to one template.

If you leave Word open with a document (no matter what size) and come back to it later this is when the problem happens. I started to get around it my saving first then closing, but this no longer works. The save completes and then I select Close and this is when it happens - you get the dreaded pause and then you hear the whirl of the computer and then you get the Microsoft Word for Windows has encountered a problem and needs to close. Firstly I could put up with it but is now just a nusiance.
 

More replies
Relevance 41.41%

This is just one of those odd quirks I have run into. When I open a new document in Word, then open an older file, the new document closes and only the old one is displayed.Using Microsoft Office 2010, specifically Word.Windows 7 64-bitA bit of explanation, I often do research/writing for school or for fun. This issue has always happened, just one of those small annoyances.Here is the exact thing that is happening:1. I open a new (blank) word document, by clicking on the Word icon or by selecting "Open New Document" in the Word program.2. I open an older (saved) Word document, by clicking on the saved file, not by using the "Open" function in Word.3. The New (empty) document disappears, only the older document is open. I must now open a new empty document to write in. What I want to happen:1. Open new document2. Open old document3. Both new and old document are open (2 windows).Other notes in no particular order:- Word has always operated like this. Just wondering if there is a way to stop it.- I am not using the "Open" function in Word to open the older file, I am opening the older file by double-clicking it in the File explorer. When I use the "Open" function in Word, it does the same (basically "closing" the new file in order to open the old one). - I tried searching through Word's settings but couldn't find anything that seemed to relate to this behavior.- As per regular Word behavior, the new document is auto-na... Read more

Answer:Microsoft Word Question (Opening old document closes new empty document)

Yes, you are right. That is normal for MS Word.Do this:Open a new document. Type something. Even a single space. Save it with a name you want. Now open an older document. Both documents can be on the screen or cascaded.If memory is not an issue, you can haven two instances of Word.

4 more replies
Relevance 41%

When I open a saved word document or New blank document, the document is filled with columns or checks fully filled in the document.
How can I avoid this? How to modify the settings. Thanks in advance.

More replies
Relevance 41%

This might be kind of tricky.

We're trying to streamline our RFQ-to-Quote process, which currently utilizes a combination of digital forms and hand-written forms passed among several departments. My boss asked me to modify the RFQ form to save him some typing (because he has to retype all the information in the final Quote), and I--not understanding the complexity of the process--very stupidly told him that it could be done fairly simply using form fields and bookmarks. He's been kind enough to grant me a lot of leniency because for him anything would be better than the current situation, so as long as I can improve on what we use now, he'll be happy.

I thought about creating form templates for each of the departments, then as the original RFQ circulated from one department to the next subsequent forms would be appended to it to create a rolling document. I'm not too happy with the that idea; there's all sorts of room for user error. I thought about creating a single document template containing every department's form, but a) I don't want any single department to be able to modify information gathered during another department's process, and b) certain departments must generate a variable number of copies of their form.

I told my boss the best way to accomplish a secure and low-maintenance RFQ-to-Quote would be to create a stand-alone Quote Generator application, but we both agree the effort is not condusive to the timeframe by whic... Read more

Answer:Word 2000: Creating a Master Document of document templates

6 more replies
Relevance 41%

Is there any free software out there that will allow me to scan a document and convert it into word/excel and allow editing?
 

Answer:Converting scanned document from image to a word/excel document

you are going to want to search for OCR programs.

Try "freeware OCR" in google or check out www.Softpedia.com

example: http://www.softpedia.com/get/Office-tools/Text-editors/SimpleOCR.shtml
 

4 more replies
Relevance 41%

Hi all.

The other day whilst in the throws of fixing another unrelated problem I came across a strange and annoying Word Document problem.

When I bought this word document up it present a very unusual icon. It was grayed out and part of the title contained a ~$ then the name of the document.

When I tried to open it, the word document only opened up to the gray page just before it should turn white displaying the text, and there it froze.

Nothing worked after that! The freeze was so bad that the only way to close the window was to turn the computer off at the tower.

After rebooting I tried it again 2 more times with the same problem freeze occurring in the Word document.

Today I again found another document that caused the same problem, this time the icon for that document was normal but right beside this icon was another malformed grayed out ~$(name) icon.

When I tried to open either of the 2 icons I got the same freezing up problem, just as before.

I tried a previously suggested step in that I opened "Word" and from there navigated to where the bad files were located.

In turn I only hi-lighted each, and at the bottom of that window clicked on the arrow for the drop down box.

I was advised that one of the presented options was to repair the file. No such option was present.

So there you have it. Any advice on this problem please?

Regards

Answer:[SOLVED] Word document freezes computer and document is corrupted

Hi all.

Just to advise that I am going to mark this topic as Solved......to a fashion so to speak.
I may resurrect it at a later stage if the problem re-presents it's self.

In a nut shell. I spent a lot of time today searching sites and performing tests including searches on my computer program.

I ascertained that all the aforementioned "defective " Word documents originated in the same folder. After performing several search functions with the criteria as ~$.doc no other such files were found on my computer, other that the already mentioned.

All tests suggested would not repair the said documents.

I have now deleted the offenders and I will monitor the situation. If I run into problems again I will re-post.

Thanks anyway.
Regards

2 more replies
Relevance 41%

Hey guys! Is there anybody knows a program that can convert (copy) words in an image to a real document that can be edited from Word?

Thanks
 

Answer:Which software can convert an image of a document to a real document (MS Word)?

If you have MS Office, as I think you do, you might try out this link:

http://weblogs.asp.net/jgalloway/ar...0_-You-may-already-have-it_2E002E002E00_.aspx
 

2 more replies
Relevance 40.59%

Can anyone help - When typing a word document my laptop keeps sending the document when I start typing. Not sure why. Any help appreciated

Answer:When typing a word document my laptop keeps sending the document

Hello

I don?t know what you mean with laptop keeps sending the document but if you have this issue with office word or some other office application, try to check some forum where you can find discussion about similar theme.

I can not give you any precise answer but it is maybe because of office specific settings or you press accidentally some key on the keyboard and on this way interrupt symbols entering.

2 more replies
Relevance 40.59%

I was working on a Word document that someone sent me by email in form of rar and saved the document. I now can't find the revised file and I have lost about 8 hours of work. Any ideas on where I can find this file? I looked in the email that was originally sent, but it is still the old file. I have also done searching on my computer with no luck. Help, I'm desperate!!! I have Word 2007. Please give me reply as soon as possible.
 

Answer:Cannot find the saved revised document in Word document

If you were only hitting "Save" and not "Save As" the document is likely, unfortunately, gone. You can try opening Word by itself and going through recent documents to see if it shows up. If you opened it directly from the email and the email was in Outlook, you might be able to find it in the Outlook Secure Temp Folder. To get to this folder, the easiest way is to send yourself a PDF file, open the PDF from the email then go to File | Properties and on the General tab (this is from memory, so I might be off a little bit) you'll find a location that you can click on. In this folder, you have a slight chance of finding the modified file. The only other option you have, that I can think of, would be digging through your temp folders hoping to find a .tmp or .doc file in there that has the content, but I give that about a .01% chance of happening. Good Luck!
 

5 more replies
Relevance 40.59%

Hi....
I'm using word 2010.
I have a Mailmerge document (actually a company letter with header and footer, used by a package called "Cash4Windows" [C4W]). This document usually has the recipients name and address etc. inserted by C4W.
The document is a template - "xxx.dotx".
What I want to do is strip out the Mailmerge fields and save the document as a normal Word 2010 document, 'cos the User wants to have a blank standard company document available.
I've spent a long time fiddling with the Header and Footer to get just what the User wanted, and I know i could just cut-n-paste the Header and Footer into a new document, then save it as "xxx.docx", but when I looked on various help sites the normal method in Word 2010 seems to be
on the ribbon tab
Select Mailings
Select "Start Mail Merge"
Select "Normal Word Document"
then save the Word document.
I've tried this and it has absolutely no effect, as when I close and reopen Word and select the previously saved document, I still get the "Opening the document will run the following SQL command" splash screen!
I've tried saving the "normalised" document with various different extensions, but nothing seems to get rid of the SQL.
I've also tried opening the VBA editor (Alt+F11) to see if I can find the SQL, thinking that if I can delete the SQL it might cause Word to avoid the prompt, but I can't even find the SQL!!!
I know I'... Read more

More replies
Relevance 40.59%

Hello


I am wondering how to make an hyperlink, from a main document, to a sentence of a sub document that got included through {INCLUDETEXT \\....docx} in the main document?

I posted yesterday this question in another forum.


I do not know how long it will take to get a reply in the other forum. I post the link to the details also in this forum, in order to speed up the process of getting an insight about a posible approach or solution for this problem. I hope this does not violate any of this forum's rules.

Thanks in advance

More replies
Relevance 40.59%

On my previous computer with Windows 2000, I was able to make incremental backups of a Microsoft Word document while it was being created by me. The advantage of this was that if an "accident" happened and the document was lost or corrupted before it was completed or saved to a folder, the partially completed document could be retrieved from a special folder somewhere in C-drive. I was able to specify how often a new backup was created (ex.: every 3 minutes, ex.; every 10 minutes, etc.). It is possible that this special folder also contained backups of all previously saved Word documents, which were also being re-backed up every few minutes. -- I cannot find any reference to this on my new computer (Windows XP and Microsoft Word 2002) in the Windows search engine, or in the Word user interface "Help". I cannot remember how I found this feature on my previous (W~2000) computer. -- Thanks
 

Answer:Word document incremental backing up while the document is being created

I just found where to set up this feature (Word user interface > tools > options > save and also file locations. BUT I STILL NEED HELP BECAUSE THE FEATURE DOES NOT SEEM TO WORK.
 

1 more replies
Relevance 40.59%

Hello,
I used mail merger to create 25 letters to different locations and different people. The source used for the names and address's were from an excel file. I used "Edit Individual Documents" in order to get all the letters in one document. Now the problem is i need a backup of each letter on my computer and i have no clue if its even possible to save each page in the master document as a unique document. If not, is there a way of saving each unique document of a mail merger?
Thanks in advance.
 

More replies
Relevance 40.59%

Hi,

I work at a small non-profit and we have updated two computers with new computers running Windows 7. We use MS Word 2003. I have checked all threads on forum related to this issue, but nothing seems to correct our problem. I would be grateful for any help.

Description of issue: With a Word document open, one should be able to click "File" > "Send To" > Mail Recipient As Attachment", or any of the other mail options, and have the email composition window of Thunderbird pop up. What happens is that Word is attempting to send the attachment via Windows Live Mail. The computer basically freezes. If you try and abort or get out of Word, and error pops up stating you can't close Word until the email has been sent. Finally, you have to force a shut down of the computer.

Internet Explorer shows Thunderbird as default email client. I have check all of the other obvious places for setting the default email client, but I can't seem to find a conflict anywhere on the computer showing Windows Live Email as default client.

As a side note, this employee was using Outlook Express as their email client prior to the computer upgrade and all setting were imported into Windows Live Mail, which was initially used. The employee did not like Windows Live Mail, so I installed Thunderbird. It is used as the default email client and the only issue has been with Word. Additionally, I know that the document could be sent from Windows Explorer by right-cli... Read more

Answer:Can't send Word Document via Thunderbird from open document

Might try uninstalling Word, then reinstalling it.
 

1 more replies
Relevance 40.59%

Dear all previously i have posted for Trojan issue and subsequently received responses from your team on time Now i am interested to know or get rid of issue with word 2003, installed in windows home basic 7 platform.......I work in several Word 2003 documents (on Windows 7 platform) at the same time. When I open the first document it stays open (maximized). If I open a second document, the document opens, but then immediately minimizes down to the task bar. Same result if I open a third document. If I click on the minimized documents to open them again, they open and stay open. why I am seeing a button for each open document in the Task Bar. with Thanks 

Answer:word document minimizes on taskbar if i open second document!!

Right-click on the START button - Properties - Taskbar - Group Similar Taskbar Buttons

3 more replies
Relevance 39.77%

I have enrolled in college after 35 years away.  My professor is posting all documents in Word form.   I have Works.  Can I convert them to open into Works?  Can anybody walk me through it step by step?  I have Word installed, but haven't "bought" the program (free trial that came on computer).  When I try to save the word document and change the save as, I don't get any options except Microsoft Word 97 and All Files.

Answer:How to convert a Word Document to a Works Document

What version works and word?

5 more replies
Relevance 39.77%

URGENT!! (Isn't it always?) I need to convert a multiple tab excel document to a word document. I read that I can save as a pdf, then convert to word but I have only Adobe Reader. If this can be done, is there a way to conserve the original format and the links in the excel doc?I would prefer leaving in excel but the customer needs a word document. Also, just in case I can convince to leave in excel -- is there a way to print the excel file as one document without printing each tab separately? If so, how do I ensure the formatting looks good to print as a regular 8.5 x 11 document?Thanks for any help.

Answer:Converting an excel document to word document

Depending of the size and shape of your Excel sheets can't you just open Word and Insert File?MIKEhttp://www.skeptic.com/

2 more replies
Relevance 39.77%

Hi,
I have problem, when I put link to .XPS document in MS word document, i can't open this link, nothing hapens , links to other file types works fine. XPS document opens without problem with IE when opening file from folder. I tried to lower security setings in IE hidden security zone "my computer" , but this wont help. There is no problem in Windows 7 with xps links. But i need it to work in Vista. I think it's some kind of security problems. Any ideas ?

Vindows Vista32 SP2
MS Office 2007 SP2

Answer:Can't open .XPS document link from word document

Will this be any help:http://www.microsoft.com/whdc/xps/viewxps.mspx

2 more replies
Relevance 39.77%

"How can I convert an Excel document into a Word document?"

Answer:How can I convert an Excel document into a Word document?

When you Paste into Word,Select Paste Special,It should offer you the choice of Unformatted TextOrWhen Paste into Word,look to lower right corner of your paste areathere will be a small Drop BoxClick on the Drop Box and select Keep Text OnlyMIKEhttp://www.skeptic.com/

13 more replies
Relevance 38.54%

Hi, I am trying to edit somethings in a XML document and save it as a notepad or wordpad document. I open it with notepad or wordpad and it allows me to make the changes. However, each time I save it after opening it in notepad or wordpad, it then reverts back to been a XML document.

Answer:XML document won't save as notepad document?

In Notepad/Wordpad, choose Save As and save it with a .txt extension, or else make a copy and change the extension of that from .xml to .txt

1 more replies
Relevance 38.54%

I am a teacher in Tennessee and I need to find a software that will enable me to edit and change a scanned document. I have some old tests and worksheets that I inherited from the teacher that had my room before me. I would like to make some minor changes to the documents without having to retype the entire set of documents. (Things like change the date and the teacher name on the heading, etc...)

Is there a software out there that will allow me to scan a document in and then alter it? These are not copyrighted materials, so that is not an issue.

Preferably, I would like a freeware or shareware or trial version of something to make sure I can navigate it before I shell out a chunk of cash to purchase something.

As a teacher, it is important to me that my materials look professionally done, so I would prefer to edit them on a computer rather than use white out and pen.

thank you so much
teach

Answer:document editing of scanned document?

You can use OCR, i.e text recognition. I'm not 100% sure if Adobe Reader does it, but Adobe Acrobat Pro definitely does. There's probably a few other free alternatives out there as well.

edit: looks like Reader does. How to Enable OCR in Adobe Reader | eHow.com

2 more replies
Relevance 38.54%

I am a teacher in Tennessee and I need to find a software that will enable me to edit and change a scanned document. I have some old tests and worksheets that I inherited from the teacher that had my room before me. I would like to make some minor changes to the documents without having to retype the entire set of documents. (Things like change the date and the teacher name on the heading, etc...)

Is there a software out there that will allow me to scan a document in and then alter it? These are not copyrighted materials, so that is not an issue.

Preferably, I would like a freeware or shareware or trial version of something to make sure I can navigate it before I shell out a chunk of cash to purchase something.

As a teacher, it is important to me that my materials look professionally done, so I would prefer to edit them on a computer rather than use white out and pen.

thank you so much
teach
 

Answer:document editing of scanned document?

6 more replies
Relevance 35.67%

Does anyone know which format is quicker to 'rip'.The size of the document is around 60 pages containing Tables, Thumbnail pictures and text.Many thanks.Angry ;)

Answer:Word Document V PDF Document

What do you mean by rip?

10 more replies
Relevance 35.67%

Hi,

I am not sure if this is possible in word, but say I have document A. I place document A within document x, document y, and document z. Is it possible to make changes to document A and have the changes updated automatically to documents x, y, and z?
I hope this makes sense.

Thanks
 

Answer:Word Document within another document

The only simple way is to go to Insert, Object, Create from file and choose to insert your file as a link (these are 2003 instructions - would be similar in 2007, though.) However, you will then get a questions about the file having links and do you want to update...every time you open the file.
You could also just insert some text and hyperlink it to the other file.
Finally, someone could probably write some VBA that would insert the file and update it every time you opened it.
 

1 more replies
Relevance 33.62%

We have a corporate Enterprise with IE11 on Windows 7. We are using Enterprise Mode instead of "open intranet sites in compatibility view" which is now unchecked.





We want sites to open in IE 8 Document Mode instead of the Edge Default which occurs when we uncheck the intranet site compatibility view.
We have the XML and Enterprise Mode Enabled and it is processing BUT the sites are changing from Edge to Document Mode 5 instead of 8?

I have tried ALL the document modes and even IE 8 Emulation and it doesn't matter which one we set, the sites are going to Document Mode 5, with the exception of Livemeeting.com which is opening in IE 8 Document Mode as it should.

Now we can set it manually in IE using the Emulation but it does not last the session.

<rules version="1">
  <docMode>
    <domain docMode="8">subdir1.mydomain.com</domain>
    <domain docMode="8">subdir2.mydomain.com</domain>
    <domain docMode="8">subdir3.mydomain.com</domain>
    <domain docMode="8">livemeeting.com</domain>
  </docMode>
< /rules>

The sites themselves have a DocType in them.

<!DOCTYPE
HTML
PUBLIC
"-//W3C//DTD HTML 4.01 Transitional//EN">
<html
dir="ltr"
lang="en">

Does anyone have any ideas on how to get ... Read more

More replies
Relevance 32.39%

I have a client with a problem creating new documents from the File > New > Word Document dropdown from Windows Explorer window. If I set her default font to Times New Roman it will stay for creating new documents from within Word. If she goes the other route mentioned above to create a new document it will always default to Courier. Also when she tries to save the document with the Save As item it defaults to txt instead of a .doc file. I am thinking there are two different templates for these two seperate ways of opening or creating a document.

OS is XP Pro
Word 97 SR-2B

Thanks!
 

Answer:New word Document from File > New > Word Document

bump
 

1 more replies
Relevance 32.39%

I'm creating a document in word 2007 at one point of the document I want to insert a link or icon that points to a separate word document, when the master document is saved both documents are saved as one file so that i can distribute it to other people not linked on a LAN. I don't need the second document to be seen but launched on a separate window when the link or icon is clicked.
Can somebody please help I've seen this on emails and PP presentations but I'm not sure if it can be done in word, I would think so!

Thank
 

Answer:Solved: Word document within a word document

Not hard at all. Open the attached - I have included the instructions to show either the other text (or at least part) or just the icon.
 

3 more replies
Relevance 31.98%

Hi I'm trying to Record a VHS from my VCR into a DVD in my computer, how can I do that? I try using the program "HT Video To DVD" and an S-Video cable from my computer to my VCR but I cant see the image of the VHS in my computer, what am I doing wrong, what can I do? Please help me!
 

Answer:Please someone help me with a VHS to DVD conversion...

15 more replies
Relevance 31.98%

Hi,
I have a logo that needs to be converted to DST file format with the following constraints
Hight 2.5 & stitch count under 10000
Can any one help me in this regard
Thank you
 

More replies
Relevance 31.98%
Question: ISO Conversion

I have a movie that is split as 2 ISO files. I want to burn them back to a viewable DVD. Or at least back to a file state where I can burn them to DVD. I have NERO 7 and CuCuSoft Creator. Help appreciated.

Answer:ISO Conversion

use iso buster or win iso to extract the files,then use nero.

1 more replies
Relevance 31.98%

Hi everybody, I have a club logo that we want to put on our club kit, but was told by the manufacturer that they would need it in .dst format. I've looked around and found a few programs, but they seem to be targeted at professionals and cost a lot of money. Can someone help me with this or suggest an easy way to convert the file?
Here's the logo.

Thanks!
 

Answer:.dst conversion help!

16 more replies
Relevance 31.98%

Hello guys. I need to convert to DVDs to mpeg2 video that I can manipulate. I tried using "VOB2MPG" but that only seems to convert half the DVD and then stops. Does anyone else know a good way to do the coversion. I need help by tomorrow night so PLEASE HELP!!!!!!

Thanks.
 

Answer:Need help with DVD conversion

Well if you want to compress it (divx or xvid), I suggest autogk. Although with this program your kind of limited with the final output.

My method is a little more complex.

DVD Decrypter->DGIndex->AviSynth Script->Virtual Dub

But depending on your manipulation software it might read avisynth scripts. But you can convert it to mpeg2 with v dub if you go that route.

Here's a guide for anime...

http://guide.zhentarim.net/
some of this is outdated

Updated Audio Guide (BeSweet)

http://www.filefarmer.com/movax/guide/index.htm
 

3 more replies
Relevance 31.98%
Question: WDB conversion

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A6-3400M APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 4
RAM: 5610 Mb
Graphics Card: AMD Radeon(TM) HD 6520G, 512 Mb
Hard Drives: C: Total - 460971 MB, Free - 381418 MB;
Motherboard: PEGATRON CORPORATION, TKBSS
Antivirus: Microsoft Security Essentials, Updated and Enabled

I am unable to open WDB files I recently transferred from my old computer. The dialogue box contains: "InfoPath cannot open the following file: (file name).wdb. The file is not a valid XML file. Those files were generated using Microsoft Works 2000.

How do I convert them to open with either Office 2003 or Open Office?

Pablo29
 

Answer:WDB conversion

Not an OS issue so I moved your thread.
 

1 more replies
Relevance 31.98%

Is there an easy way to convert mp3's to WAV's? I have both Roxio's Easy CD Creator and Easy Media Creator, but I can't figure out if they will allow me to do the conversion. I also have Winamp and CDex. I figure I should be able to convert from mp3 to WAV using CDex, but I haven't been able to figure out how. I've heard that Acoustica works well but it isn't free.

I would greatly appreciate from anyone who might be able to help me. Thank you.
 

Answer:mp3 to WAV conversion

15 more replies
Relevance 31.98%

Hi,
I am working on getting a jpg file converted over to a DST file for a baseball hat. I have called a few embroidery places to convert this over and they want to charge 50$. Is there a way to do this myself? I have attached the jpg. Only need it to be 2.5" tall and 3.25 wide. Can anyone help?
 

More replies
Relevance 31.98%
Question: MMF conversion

 hi, everone.i am looking a free software for MP3 to MMF conversion.my mobile phone only accepts MMF audio type as ring tone.Please help if you could.

Answer:MMF conversion

Take a look here, http://216.239.37.104/translate_c?u=http://www.share88.com/download/MMPoly.exe for a specific product and here, http://www.google.com/search?hl=en&q=MP3+to+MMF+conversion&btnG=Google+Search, for info on more options.

1 more replies
Relevance 31.98%

I have been working with an Olympus digital recorder to record and transfer voice files. My problem is that olympus's file compression software saves the files with a .dss extension and I have found that what I really need are files with the .vox extension. Do I have to buy a new recorder or is there an easy way to convert from .dss to .vox? When I called Olympus tech support their tech told me that he has been working with computers a long time, and he had never heard of a 'vox' file. Needless to say, they weren't much help. Thanks!

RET
 

Answer:dss to vox conversion?

11 more replies
Relevance 31.98%

My lotus notes file gets crashed. I want to get back my database Please help me to find a freeware tool.

Thanks.............
Jenifer
 

Answer:NSF to PST conversion

http://www.nsftopst.org/conversionfreeware/
 

6 more replies
Relevance 31.98%
Question: AVI Conversion

What program is the best to use for avi to wmv conversion that is ease of use and user friendly. I'm wanting to compress TV shows that were saved as AVI to a smaller format as WMV. Iv'e tried Using Windows Media Encoder, several times attempted to convert the files..but keep having problems. Someone knows Encoder i'm willing to stick with it..if i can get the help..otherwise it's too much of a headache. Iv'e seen files that were originally over hmm 500,000 compressed down to less then 90,000 being converted to the WMV format. Thanks in Advance

System Specs:

Intel P4 D845WN mobo
Intel P4 1.5 CPU
640 SDRAM
Windows XP Home Edition
 

Answer:AVI Conversion

Why don't you do a search on the web for avi to wmv conversion and download a freeware/shareware and try another program to eliminate the problem. I can easily give you a list of software if I do a search, but you won't be able to know what each one is capable of doing.
 

3 more replies
Relevance 31.98%
Question: Conversion

Is there a cable that can go from the RCA jacks on my television to accept HDMI?
 

Answer:Conversion

Does the TV have any other inputs? What is the model of the TV?

I wouldn't expect the quality to be very good with a composite input and you will also need to see what resolutions the TV supports, it may be limited to a very low 640x480 resolution that newer PC's don't support properly.

Here's some adapter devices that you may be able to get from Walmart and see how they work: https://www.walmart.com/tp/hdmi-to-rca-converter
 

1 more replies
Relevance 31.98%

Hello all. My neighbour is a huge history buff and a hat collector, and he wanted to print himself some hats to do with history and Canada. He went to the local Lids store and they told him he needed a .DST file, so he asked for my help. I did a Google search and ended up here. Here are the 3 images he was looking to get on 3 different hats.



For the last image, the one of the great lakes, also maybe some text below it that simply says The Great Lakes.

He isn't too picky about these, they just need to be able to fit on baseball caps. He doesn't care about fonts or anything, just that The War of 1812 hat has red lettering.

If anyone would be be able to help me or point me in the right direction, I'd be very grateful. I'm also more than willing to pay people for their time, as long as they let me know their price range beforehand.

Thanks very much for taking the time to read this.
 

Answer:.DST conversion help

Here's a screen shot and a zip file with the DST and color chart for the Great Lakes. The other two are more detailed than I can donate time to so you may need to have LIDS do the digitizing on those. They will need the contents of the zip file to do the hat.
 

2 more replies
Relevance 31.98%

I have a document that was created on a Mac and I would like to access it from MS Word. Does anyone have a suggestion on how I can convert it?

Many Thanks!
 

Answer:Mac to PC Conversion

16 more replies
Relevance 31.98%

Convert an MP3 to M4A? ... OK, I have seen stuff on the web about it, of-course, and the hits all offer software downloads & such, promising UBER conversion etc. I just decided to trust this site more. My question should be: Which software is recommended for the task? Would anyone happen to know of a safe download (& where to find it)?

Answer:Mp3 To M4a Conversion?

You can convert .mp3 to .m4a.Do a search on the search engines and there are tons of information on how to do it.

7 more replies
Relevance 31.98%
Question: Conversion

Hello all,I downloaded a few music videos and would like to burn them to DVD. Can someone suggest a software that might be able to convert the format played on Windows Media to that, that will play on a DVD after it is burned.Thank you, Hennessy

Answer:Conversion

http://www.download.com/HT-Fireman-CD-DVD-Burner/3000-2646_4-10419166.htmlhttp://www.download.com/Sun-CD-DVD-Burner/3000-2646_4-10416370.html?tag=lst-0-6http://www.download.com/Flash-CD-DVD-Burner/3000-2646_4-10426826.html?tag=lst-0-8

1 more replies
Relevance 31.98%
Question: conversion to pdf

how to convert a open office spreadsheet to pdf by a single mouse kick

Answer:conversion to pdf

Download one of the free PDF converters such as CutePDF, PrimoPDF, BullZip, etc. These converters install as "printers" on your system, available via the printer list in any app.When you "print" to the app it creates a PDF.Set the app as your default printer and with a single click of the print icon, you'll create a PDF.Since I doubt you'll want the PDF app to be your default printer, you have a couple of other choices:1 - Settle for more than a "single" click and choose the PDF app each time you print.Something like:File...Print...choose the PDF app...OK2 - Create a macro that captures your current default printer setting, switches your printer to the PDF app, prints out the doc and then reinstates your normal default printer.That macro could be attached to an button so that a single click would execute it.I could do it with VBA for Excel, but I don't know the OOO3 macro language well enough to write one for OOO3. Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

3 more replies
Relevance 31.98%

Hello all.
Any thoughts on the simpliest program for accomplishing this?
Thanks.
 

Answer:PDF Conversion to JPG

7 more replies
Relevance 31.98%

I am trying to convert FreeHand 9 files to a file type that can be opened on a general use computer(jpeg,els,). Is there any software that could help me accomplish this. This is kind of a new area for me, so any help would be appreciated.

More replies
Relevance 31.98%
Question: wab conversion

Wrinkly1 is back again asking for help,I have an exported address book from Outlook Express which I seem unable to import. Is there a programme that converts wab files so that at least I can read them and re-enter as needed ?I knew I should not have shot my Pigeon!

Answer:wab conversion

You should be able to import address book as a wab file.

4 more replies
Relevance 31.98%
Question: Conversion

Forgive me if I'm asking in the wrong area, but I am wondering if anyone uses software or even non software (external devices) to convert music from LPs, tapes to MP3s and video to video formats. I am searching for something with ease of use for my mother who would love to convert her old collection of music for an Ipod. She's been wanting to do this for awhile now and I thought it would be a good Xmas gift.

If I'm in the wrong area, I appreciate a direction to the correct area.

All help appreciated.

Thank you

Answer:Conversion

Well, I can give you a partial answer.

There is a commercial application called Roxio Easy Media Creator that is a comprehensive suite of tools for creating, and editing all kinds of media such as video, audio, pictures, etc. and then managing them such as creating home DVDs, video clips, slide shows and of course disk burning. It costs around $50 and is easy enough to use since it is designed for the casual home user.

Within this suite is a utility called "LP and Tape Assistant". This utility has you connect the audio output from a LP player or Tape drive (or any audio source) to the input to your sound card on your PC. The utility then 'captures' the audio that comes out of your PC sound card (speakers) and converts it to any of several sound formats (such as MP3, WMA, WAV, etc.) and stores it in a file on your hard disk. You must do any queueing of the pieces and must manually type in the title, artist etc. if you want to so there is a fair amount of work involved. There are controls to autopause, silence system sounds etc. This utility can also be used to capture any audio from any source that is being sent to your PC speakers so you can surf the web looking for online radio to capture.

The same producer (Roxio) has provided, as a free 'Gadget' for Windows Vista, a stripped down version of this utility (LP and Tape Assistant, not the entire Easy Media Creator) that will do the capture and record functions of the full utility. The Gadget ... Read more

5 more replies
Relevance 31.98%

conversion of vb.net to exe

Answer:conversion of vb.net to exe

Google yields:http://www.google.com/search?q=vb.n...You have to be a little bit crazy to keep you from going insane.

2 more replies
Relevance 31.98%
Question: swf conversion

How can I convert an .swf file into .mp4 or anything I can actually view it on?
 

More replies
Relevance 31.98%

Does anyone know how to convert .dbx files to .eml or restore .dbx files back to outlook express in a format in which they can be read............also, .wab, the default OE/Win address book......is there a way to convert that to a .csv file.

Brent
 

Answer:*.dbx, and *.wab conversion

http://majorgeeks.com/download.php?det=4179
 

1 more replies
Relevance 31.98%

i have tried converting our .pst to .nsf using migration tools of lotus notes 6, unfortunately not all of them were converted. any suggestions there? Our company right now is migrating from exchange to domino, and i do need help.
 

Answer:.pst to .nsf conversion?

You check out this? - http://www.transend.com/ looks like exactly what your looking for.
 

3 more replies
Relevance 31.98%

Hi guys

Same old story... lost my w98 1st edition PC to a HDD failure....Managed to recover the OE4 MDX files from the win 98 pc and tried to import them into OE6 on new Win XP. put them in a folder called c:\my documents\mail and ran import. OE6 could not find it. I am of the understanding that OE4 and OE6 have to be installled on the same machine for the import to work. I no longrt have OE4 does anyone have a copy or know where i can download one? Is there an easier way of converting MDX to DBX or even PST?

Does anyone know of a thrird party conversion/migration tool for this purpose.

Please I need some help urgently
Cheers
RAZ
 

Answer:HELP Please...OE4 to OE6 MDX to DBX/PST Conversion

6 more replies
Relevance 31.98%
Question: DVD Conversion

Hi GuysI posted a question 3 months ago regarding DVD conversion from a DVD produced on a Macbook and got no response, well if it means anything I have more info on its production. It was produced using Imovie HD6 on a Macbook. Does anyone have any ideas how I can get it to play on my Win PC runnng XP Home SP3. As it is now the disc is not recognised in either of my 2 PC's or my laptop. It plays fine on my TV.CheersAllan

Answer:DVD Conversion

as far as i'm aware windows doesn't play DVDs natively. Licensing restrictionsDownload VLC media player and "open disc" from that. That plays anything!

4 more replies
Relevance 31.98%
Question: .ram Conversion

Are there any programs that convert Real Media into mp3 or something more standard like that?

Answer:.ram Conversion

http://www.dbpoweramp.com/

3 more replies
Relevance 31.98%

Can anyone lead me towards a free progamme to convert PDF files to DOC or to other graphic file format please?- Wol

Answer:Conversion from pdf

Google is your friend Wol click here=

3 more replies
Relevance 31.98%
Question: .CMV conversion

in the game Dwarf Fortress there is an ingame recorder however it saves the vids to a .CMV file which I don't know how to change, I looked up .CMV and its like a corel animation...? I think? I have had no luck finding a converter though, can I get a lil help?

More replies
Relevance 31.98%

I desperately need to convert files from .TIF format to .PDF format on a regular basis. All of the "free" conversion programs I find either install adware as a part of their installation or require you to install adware prior to allowing you to install the program (ie: PDF995). Does anyone know of a truly free converter?

Thanks in advance!
StartingOver

Answer:.TIF to .PDF conversion

Have a look through these offeringshttp://sourceforge.net/search/?type_of_sea...+.pdf+converter

3 more replies
Relevance 31.98%

Dear folk,

Last month I switched from Outlook for Mac 2011 to Windows Outlook 2010. I found that both the email clients support different file types for storing emails and other mailbox data, i.e. OLM in Outlook for Mac and PST in Windows Outlook. Let's come to the point now.

I need to access my old OLM files in Windows Outlook, but it is not possible without conversion. I searched a lot and came to know about many third-party utilities. Besides them, I found a blog post published about using IMAP to transfer email.

A manual trick is given in this blog post and it can help me import my OLM files' data to a new PST file according to the blogger. But I'm not sure about this. Can you please check the trick and let me know if it would be useful or not?

Thanks.
 

Answer:OLM to PST conversion???

Hi and welcome to TSG. The 'blog' is very spam like so I have removed the link.

If your question is if you can setup IMAP and and move over your POP3 or archived emails to that type of account for migrating to another computer then absolutely you can do that.

FYI, most email services these day support IMAP or are ActiveSync accounts, using a POP account is something you should rarely use and you'll avoid this problem.
 

3 more replies
Relevance 31.98%

I want to throw some music into a Powerpoint I'm making, but it will only let me use Wav's. I keep trying to find an MP3 to Wav converter on the web, but all that keeps coming up ia really unreliable trial-ware. Is there some kind of free software I can use to convert MP3 files to Wavs, or some kind of trick I could use?
 

Answer:MP3 to Wav conversion

12 more replies
Relevance 31.98%

HELLO,SORRY I DON'T SPEAK AND WRITE INGLISHI HAVE A THINKCENTRE M57P VISTA B.I UNISTALLED VISTA BUT I NOT CAN INSTALLED XP BEAUCOSE THE INSTRUCION FOR WIN XP CONVERSION KIT IS DIFFERENT TO REALITY.I HAVE 1 DVD RESCUE AND RECOVERY AND            1 DVD THINKCENTRE  PRODUCT RECOVERY DVD.

Answer:HELP FOR WIN XP CONVERSION KIT

NOTE:  Make sure you use the create your recovery media to make a recovery cd set for your vista preload.  Otherwise you wont have it to restore if you ever decide to go back to Vista.  1)  Power down your system 2) Put the Rescue & Recovery cd into the cd drive. 3)  Power on the system 4)  Follow screens to recover your system with XP If your system wont boot off the CD you will need to go into the BIOS (press F1 on cold boot) and change the boot sequence to put the cd drive before the HDD.





_____________________________Ed ShumpertService Operations ManagerNA Service & Support

1 more replies
Relevance 31.98%

Recently, I had to reinstall Windows to fix a spyware and adware problem and now i have SP2 installed. On the C drive, I have a separate folder that has every file and program which was installed on the old system (i.e. before I had SP2 insalled). Is it ok to just delete this whole file as I dont need anything from it and it's taking up a whole chunk of hard drive space (a good 20-25 GB)? The folder is simply just another folder on the C drive, it is not in the Program Files or Windows folders.
 

Answer:Conversion to XP SP2

There's no point in keeping the installed program files after you re-install Windows. They are pretty useless.

One point. If you have customized things in some of the applications, and you're going to install them again, you might want to sort through the folders and save any customized application settings.
 

2 more replies
Relevance 31.98%
Question: Conversion

I am doing a project and I need to edit something from my camcorder. I am using Windows Movie Maker. How do I convert something from a camcorder to wmv?

Answer:Conversion

you camcorder should have had some software for editing and transfering video data to a PC. a program i use for all my conversion needs is WinAVI. and you can snag it for 19.95. it converts it all. DVDs AVIs WMVs even RM files too. you can convert many formats into those listed and other formats as well. even turn an AVI into a DVD and watch it on HOME DVD players. i love this lil program!

2 more replies
Relevance 31.98%

What is a free and easy way to convert WMA files to MP3 format?I've tried using the winamp transcoder plug-in but it doesn't seem to work. Whenever I try to transcode a file, an error message is brought up and no conversion takes place.Thanks for any help.

Answer:Help with WMA to MP3 conversion

This is just perfect for the job click here

2 more replies
Relevance 31.98%

I have a little problem with Microsoft Word.

I need to convert .doc file into .pdf. For that, I'm using Acrobat Professional as a tool in Microsoft Word. However, when I do it, it simply doesn't show my footer (which consists of an image) in .pdf. The header also has an image, but it shows it nicely. My footer is actually a part of a watermark - does that have to do anything with the problem? When I print the document on an actual printer, it actually works well, but conversion to .pdf is messed up.
I've tried printing to .pdf, but other images get messed up even though the footer is displayed (although it looks quite bad).

I'd appreciate any kind of help!

Answer:Help with .doc to .pdf conversion

Hi -

If you are using Office 2007, Microsoft offers a free download add-on that will allow you to save a .doc or .docx file in PDF or XPS format.

http://www.microsoft.com/downloads/d...displaylang=en

I have not yet tested it with Office 14 (2010).

Regards. . .

jcgriff2

.

3 more replies
Relevance 31.98%
Question: DVD Conversion

Could someone please recommend a good free program that will allow me to either:

1. Convert a Region 2 DVD to a Region 1 DVD

OR

2. Convert a Region 2 DVD to .avi file

Thank you.

Answer:DVD Conversion

I am not exactly sure what you mean, but I know that dvd shrink and dvd decryptor both has many features to minipulate dvds.

5 more replies
Relevance 31.98%
Question: flv conversion????

Okay. I tried about 9 kinds of video converters but none of them can convert flv videos to mp4, avi or any other format. Other formats work (avi-mp4, mp4-avi etc.) What is this kind of problem? For about 2-4 months I had no problem converting flv files w/ my converters but now...none of them will work when it comes to flv.

Any idea what's happening?

Thanks!

Answer:flv conversion????

flv files can be viewed with vlc media player and it's free. They can be burnt to dvd with vso convertxtodvd unfortunately this isn't free, but is worth the money.

If you need to convert it for editing I can't help, I've looked in the past myself lol.

1 more replies
Relevance 31.98%

I have got my son a psp and he has lots of ps2 games and I was wondering if there is a way I can play his ps2 games on his psp.
Not sure if this would be done by puting games on the memory card or what.
Any info will be appreciated greatly.

P.s. It is firmware 2.71.

Cheers, Allan.
 

Answer:ps2 - psp conversion

As far as I am aware, SONY has not released any information on transferring PS2 games to PSP.
 

1 more replies
Relevance 31.98%
Question: DST Conversion

Need this photo converted to a DST so i can get it embroidered on a hat.
 

More replies
Relevance 31.98%
Question: VCD Conversion

Are there any freeware utilities to convert common video filetypes to VCD format?

Answer:VCD Conversion

try nero demo
http://www.nero.com/nero7/eng/nero7-demo.php

2 more replies
Relevance 31.98%

hi can anyone tell me how to convert dvd to avi format? which program is best to use. i would like to back up some dvd movies to avi format cos i know that it will save me some space on my comp. some dvd movies are 5GB or more and those converted to avi format are around 700MB. i sew some movies converted to avi with XViD codec or some like that....any help?

Answer:dvd conversion to avi

nobody ?

4 more replies
Relevance 31.98%

Hi,
I need to convert this .png file into a .dst file. Please could you help?
Many thanks
H
 

Answer:PNG to DST conversion

Have a READ at http://forums.techguy.org/digital-photography-imaging/1116354-guidelines-re-requests-dst-file.html
 

1 more replies
Relevance 31.98%

does anyone know if any of the MP3 encoders up on Windows Media website convert from WMA to MP3 ?

i have a bunch of WMA files, which i would like to convert to MP3 to put on my iPod.

is there any other software that can convert from WMA to MP3 ?

thanks!
 

Answer:WMA to MP3 conversion?

Try this site:

http://www.wma-mp3.com/
 

1 more replies
Relevance 31.98%
Question: Conversion

At least I think that's what it's called.My laptop is a Dell Latitude C800 Professional Version. I used to have a Memorex CD/RW Recorder. It used Nero 6. (the unit died). I did a backup with Nero's backup feature.  Now when I try to open a file, I get a screen that has nothing but a mess of symols. How can I change this into something I can read.   

Answer:Conversion

If you can see the file type extension (.nco), change it to .zip, and open it with whatever program you usually open .zips with. If not, go to control panel --> folder options --> view --> uncheck "hide file extensions for known types" so you can see the filetype.(see http://www.fileinfo.net/extension/nco)

2 more replies
Relevance 31.98%

Anyone know a good freeware m4v to dvd conversion tool.

Answer:m4v to dvd conversion

This is good: Click here

2 more replies
Relevance 31.98%

Hi,guyz is there any software which can batch convert transparent PNG file in to two separate BMP files---One as the image itself and the second one as Transparency Mask.

There is one freeware here which does the job but it doestn't support batch conversion.So,if you have any idea how to make that freeware to batch convert(like using .bat fle ..etc),Plz share it with me.

Thanks!
 

Answer:About Png Conversion!

7 more replies
Relevance 31.98%

Hi,

I have written a small PC GAME. It uses a webcam, and you can bounce a ball around on the screen. It is preferable to use 32bit color mode, and have your webcam plugged into the PC.

It can be downloaded at:

http://www.geocities.com/raylito/game.zip

Please contact me at [email protected] if you are interested in this game.

Thanks,
Ray
 

More replies
Relevance 31.98%

I had recently recieved a server case to build a fellow pastor a high-end system for ministry purposes. Much to my dismay, the case came with an AT power supply. If any of you have moderate hardware expierience, you should know that the switch is connected directly to the power supply (in comparison to the ATX format which plugs the power switch into the mainboard and feeds off of the power running though the mainboard.)

Since I will be using an ATX power supply, I have a couple questions:

1) Is it possible to convert the power switch to be usable for an ATX power supply?

2) If so, how would I go about doing that? (four wires run into this switch, they are color coded as follows: Brown, Blue, White and Black)

3) If it is not possible to convert a switch, then where would a new ATX switch be purchaseable at?

A picture of both the computer and the switch has been attached to see what I'm working with.
 

Answer:at to atx conversion

Howdy there unitedistand...

It can be done, but...because the switch is either always on, or always off, it would be very confusing as to how to power it up, and down, ( IE: you would have to push the switch to power it up, then push the switch again to break the connection, and do the same thing again to power it down, and for this to work you would need an OHM meter to check the switch, to see which wires make the connection ), however...assuming that the motherboard is an ATX motherboard, you can get an ATX power switch such as this, it should work just fine...
 

3 more replies
Relevance 31.98%
Question: drm conversion

hi there has anyone else had this problem?
I use aimersoft drm media converter
Over last year it worked fine
I've converted bbc programmes on protected wmv to unprotected wmv and then burnt to dvd using Aimersoft video ultimate.
Recently I tried this and it didn't work got a message " invalid floating point operation"
Repeated messages to technical support was unsucessful and aimersoft could only suggest try another product
I use windows xp
Any suggestions (even rude ones) gratefully received
 

Answer:drm conversion

as the DRM media converter is used to remove the DRM protection, we cannot assist you here. Closing thread, please read the rules page at www.techguy.org/rules.html .
 

1 more replies