Computer Support Forum

DNS server unreachable or unavailable 24-01-08-033

Question: DNS server unreachable or unavailable 24-01-08-033

Please can someone help me!I using edimax router to connect to aol, but keep on getting the DNS server unreachable or unavailable (24-01-08-033) error message. until recently it was working perfectly, then this error, i reloaded the software and now when i go to the sign on screen i have to use existing member as username,but it still doess not let me sign on!!My laptop which is connected wirelessly is able to connect nearly always via aol using my normal sign on name.please please can someone help me!!!

Relevance 100%
Preferred Solution: DNS server unreachable or unavailable 24-01-08-033

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: DNS server unreachable or unavailable 24-01-08-033

Check all your IP settings and acount details.If that doesn't work try turning off the router for a few minutes.

1 more replies
Relevance 95.12%

All of a sudden can't connect via Modem to the Internet. Not on Broadband but seem to be getting BB related error message: DNS server unreachable or unavailable >(24-01-08-033)" Anyone got a fix for this? Nellie!

Answer:DNS server unreachable or unavailable

Try click here

5 more replies
Relevance 95.12%

Trying to link new Laptop to USB AOL Broadband Cable Modem, Error message DNS Server unavailable etc, AOL cofirmed modem working have disabled Norton Anti Virus & Firewall but still no Joy, any ideas. Still waiting on response from Dell Technical Support.

Answer:DNS Server Unreachable or unavailable

Have a look in Internet Options/Connections/LAN Settings and make sure "Automatically detect settings" has a tick.

3 more replies
Relevance 94.3%

ive configured my pc to aol broadband, ive connected laptop to router with erthenat cable as "stated in manual", the icon in bottom right of screen says siganl strength excellent , wireless connected, but as soon as i unplug the erthenet cable the internet goes off please helpmy router is thomson speedtouch 576

More replies
Relevance 72.98%

When I try to go to on my desktop PC, it gives me a message that the page is unavailable.
It happens in Chrome, Firefox and IE.
I can go to just fine on all other devices, like my phone, laptop and other computers, so I assume my desktop PC is to blame.
I disabled my Bitdefender Security's antivirus, firewall and its other tools but to no avail.
I used Ccleaner and other tools to clean history, cookies, traces etc. and that didn't help either.
I scanned the computer with Bitdefender and Malbytes, and they found no viruses or other harmful stuff.
I would really appreciate your assistance.

Answer:Solved: unreachable/unavailable all on browsers

15 more replies
Relevance 62.73%
Question: Server unreachable

I cannot get online whenever I try I get the following message in a software Update box. The server is unreachable. Retry the request. When I access network connections, the broadband connection symbol has a x over it, and there is this message. This connection is not available because there is a problem with your modem is network adapter. Can anyone offer any solution please

Answer:Server unreachable

Try to update the driver

4 more replies
Relevance 62.73%

i have bought a second hand laptop microstar medion 2020,i am trying to connect to my existing router thompson 576,i have a belkin pci card and all seems ok,until i try to connect to aol but the followin error comes updns server unavailable24-01-08-033,it is searching for my ip address?? can any one help me i am so near yet so far from connection.i know there is a lot of computer literate people out there can anyone HELP

Answer:dns server unreachable (aol)

what operating system are you using?

2 more replies
Relevance 61.91%


I am using an old laptop as a server for Plex and Subsonic, I login to it via RDP. Often the plex server becomes unreachable. Also at times I can't login via RDP for a few minutes with an error that the host is unreachable, this issue sorts itself after a few minutes and I can then log in again.

I'm wondering could this be due to hard disk spin down as all other power setting are set to stay awake.

This is on a Windows 7 setup, thanks.

Answer:Laptop Server Becomes Unreachable

Apparently this is not due to hard disk spin down as I have set it to never spin down and still experiencing problems.

Any one with any ideas on why I may be having these issues please let me know your thoughts.

1 more replies
Relevance 61.91%

Hi, I'm having a bit of trouble since last week. I have hosting my web site and my laptop can't seem to connect to the web site anymore. Everytime I try, I get an error msg: Gateway time out--- Server Unreachable.. sometimes when I repair the wireless connection I can get access, but sometimes I can't.

I've tried scanning with with Nortons antivirus and scanned with spybot and also with Adware. I'm lost in the dark right now. My Desk top computer can access the web site though.

Can someone help me please.

Answer:Error msg: server unreachable

This is what I got when I just tried that site;

"This page is used to test the proper operation of the Apache HTTP server after it has been installed. If you can read this page, it means that the Apache HTTP server installed at this site is working properly.
If you are a member of the general public:

The fact that you are seeing this page indicates that the website you just visited is either experiencing problems, or is undergoing routine maintenance."

Checking the URL with a server identification tool produced the information that it is online, but returns a "HTTP 1.0 403 Forbidden", which seems to confirm the information above.

The IP address for that domain is Sometimes, using the IP address instead of the URL works better, although I don't expect it will make much difference in this particular case.

3 more replies
Relevance 61.5%

Dear all

Not sure if Networking is the right category for this, but here goes...

We have several Windows Server 2003 boxes in a remote hosting centre that we connect to via Remote Desktop Connection from our offices. At the end of each working day, it's usual practice simply to close the RDC window, and in the morning we can reconnect to the same session and quickly resume working. But on a regular basis, one of the boxes (let's call it W2) becomes unreachable by morning, as in, it's unpingable and to all intents and purposes no longer on the internet.

To resolve this we can use Terminal Services Manager on one of the other remote boxes (let's call it W3) to connect to the problem box and reset the session. But we can only do this from W3 - none of the other remote machines can see W2 at this point in time. When the session has been reset, W2 once again becomes reachable remotely.

The Event Log shows up various suggestions but none of them are conclusive. About a week ago I had this, with a Source of "TermDD", which I thought looked promising:

Event ID 50
The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client.
But I've not had it since and the strage behaviour has continued.

I've also had messages with a Source of "W32Time" that go like this and suggest the moment at which the disconnect occurs:

The time provider NtpClient is currently receiving valid time data ... Read more

Answer:Remote Windows server becomes unreachable

Is bumping frowned upon around here? Apologies if so...

1 more replies
Relevance 60.68%


I've been looking all over the internet to try and resolve this, but I couldn't find a solution... here goes:

I've been unsuccessful in trying to set up my Verizon DSL connection. According to Verizon tech support, the phone line is fine and my problem in connecting lies at home.

The details:

-I haven't been able to run account setup for my DSL service because I'm getting a problem in connecting

-I'm running Win2k

-I'm connected to the DSL Modem with a Belkin NIC

-The connection shows that it's active, BUT it only sends packets, doesn't receive them.

-When I ran ipconfig, my ip was in the range, and Autoconfiguration Enabled read Yes

-When I went to release my IP, I got a message that said
"All adapters bound to DHCP do not havee DHCP addresses. The addresses were automatically configured and can not be released."

-From the Microsoft web site, I followed instructions to disable APIPA found here ->microsoft support link

-Now ipconfig reads my ip as all zeros, and I get an error when I try to run the command /renew that says the DHCP server is unreachable

Thanks in advance


Answer:problems setting up DSL / DHCP server unreachable

9 more replies
Relevance 60.68%

Not really a "problem", but I got to thinking...
Sure- I can get email notifications on my phone if a UPS has lost power, or if the server is under heavy loads and whatnot- but how do I tell when the server is unreachable- for ANY reason?
Say the UPS fails, the NIC fails, or any other reason. How can I be notified of it? The server is down, so obviously the email wouldn't originate from it.

That leaves me to wonder- how do you tell? I'm thinking there has got to be some sort of software somewhere that you install on another PC (maybe the PC and the Server) that talks with the server to make sure it is up. If it is unreachable- it issues an email notification.

That of course brings up a problem to my mind- what if that other PC (workstation or whatnot) is at fault? In other words- the server is fine but the client PC's NIC failed? I would get a false alert. In which case I would need a third PC in the mix to verify results of the other two...

Just brainstorming here- anyone have any ideas?

Answer:Email Notification if Server is Unreachable for Whatever Reason?

at my job we use hpov for the servers

15 more replies
Relevance 60.68%

I have had a network for almost two years with no problems, and for some reason my laptop has not been able to get online for about a week. It did this once before last year sometime, and I phoned Bellsouth; they said to shut down all the computers and then restart them, and that fixed the problem. It did not help this time.
I have tried everything I can think of.

My laptop is a Sony Viao with Windows 2000. I am using a Linksys router and wireless card with my Bellsouth Westell DSL modem. Someone else set up the network for me, but I don't have contact with that person any more to help me. I will probably phone Bellsouth again, but thought I'd try this, too. I tried Linksys' live chat but they kept getting disconnected.

When I type in ipconfig /release it says it's already released. When I type in ipconfig /renew it hangs a long time and then tells me that the DHCP server is unreachable.

I have three computers. One is this Dell I am currently typing on, with XP, and it is connected directly (wired) and works fine. Sometimes the connection goes out and I have to unplug the modem and plug it in again and then it works fine. That has always been true, though.

I have another Dell, an old one with Windows 98, and it is wireless. We don't use that one very much because it's slow, but it has a wireless connection and sometimes it can't get online, either. It has troubles but sometimes it works, sometimes it doesn't. That's been for ab... Read more

Answer:DHCP Server unreachable/wireless connection out

6 more replies
Relevance 59.04%

XP Pro SP2, all latest updates. When I reboot, I can correctly sync to a time server, but after an unknown amount of time it goes back to saying "The RPC server is unavailable" instantly after clicking Update Now, regardless of what server I tell it to sync to. I also noticed that if I view my nForce Networking Controller status, then click Properties and go to the Authentication tab, everything is greyed out. If I hit OK without changing anything (I can't change it even if I wanted to), a message pops up saying "An unexpected condition occured. Not all of your requested changes in settings could be made" and just goes back to that window. I have to hit cancel to close it. These two issues seem to be related since right after I reboot, the Authentication tab works normally (as well as the time sync like I mentioned above), and they both seem to stop working at the same time. I have no idea if it happens after something I run or if it's just after a certain amount of time or what. Any ideas?

Answer:Solved: Unable to sync to time server - RPC server is unavailable (but more)

I have the same problem exactly. There is an article at Ed Bott's Windows Expertise ( tyhat discusses problems with the Windows time Server, but nothing he suggested worked for me. It just won't matter what server I choose.

2 more replies
Relevance 54.12%

I'm working with a powershell script that backups and clears the event logs of specified servers. Powershell remoting is enabled on all the servers necessary. All servers are in the same AD domain. However when I go to run this script I get an error that the RPC Server is unavailalbe.

Any feedback would be appreciated.

Answer:RPC Server is unavailable

Check your DNS.

Try with the IP's of the machines instead of the machine names.

9 more replies
Relevance 54.12%

while checking event logs i note a few error messages of above entered by diskeeper any problems likely or the meaning of them?johnny.

Answer:rpc server unavailable

further faul logged also xp proThe server {80EE4901-33A8-11D1-A213-0080C 88593A5} did not register with DCOM within the required timeout. also pc hangs within a few minutes of screensaver running, just seems to be one prob after another lately.johnny

6 more replies
Relevance 54.12%

hi, trying to install a printer to my computer, but keep getting an error reading rpc server is unavailable, can anyone help please???

Answer:rpc server unavailable, need help????


Originally Posted by john mills

hi, trying to install a printer to my computer, but keep getting an error reading rpc server is unavailable, can anyone help please???

Well I found this procedure that fixed this problem for another poster.

I found the problem. The RPC server is unavailable because the service couldn't function properly because it's dependancy (server service) couldn't start... I checked the dependencies through the server's properties and I looked through services and started those required dependancies to start the server service, once that started... Everything functioned properly. Sorry, didn't mean waste the thread. I just hope this thread will come handy to those who stumble upon it through google with a similar problem. xD

If you don't know to get to servces. Start> control panel>administrative tools>services.

Good luck

3 more replies
Relevance 54.12%

I was trying to install the latest ATI Drivers when the Installer gave me an RPC Server Unavailable error. Both RPC Services ARE running. I dont know what else I can do.

Answer:RPC Server Unavailable

Checkout this MS article for a fix:;en-us;Q224370

2 more replies
Relevance 54.12%

I am trying to load a program (Partition Magic 7.01 and I get the message:

"The InstallShield Engine (Kernel.exe) could not be launched.

The RPC server is unavailable"

Answer:RPC server is unavailable

go into Control Panel > Administrative Tools > Services and look to see if the Remote Procedure Call (RPC) service is started and also the startup type is set to automatic.

3 more replies
Relevance 54.12%

Hi folks,I'm running Vista Home Premium SP2. I went to to try to download firefox, and as soon as I clicked on the "Download Firefox" button, I got the message below. This happened when I was at one other site, but I can't remember the name of the site (ETA: I just remembered that it is The only difference was the Line and Char specified in the error. I ran a scan with MBAM and found nothing. I'm wondering why in the world a webpage needs my RPC server. Is that common? Either way, I checked the server and the locator in services, and the server was started. So I don't have a clue what's causing this. Any and all help is much appreciated!Webpage error detailsUser Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB6.4; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; eSobiSubscriber; .NET CLR 3.5.30729; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET CLR 3.0.30729)Timestamp: Tue, 23 Mar 2010 03:21:41 UTCMessage: The RPC server is unavailable.Line: 483Char: 7Code: 0URI:

Answer:The RPC Server is Unavailable

Try it again, and can you download from other sites?Try

27 more replies
Relevance 54.12%

I have windows XP and am getting this error. Any suggestions?

I recently had to use Windows Recovery console to restore the windows\system32\config\system file.

My system boots now, but I had to re-load some drivers and now am getting this RPC error when I try to load some additional programs/utilities.

Any ideas on how to remove/fix? I went to Microsoft and they say it is a windows 2000 error?

Answer:The RPC server is unavailable.

Sounds like it's been
Go to Start>Run, type services.msc, hit enter.


Scroll down until you see Remote Procedure Call (RPC), then look under the Status column to see if it is started. If so, you have a problem. If not, look under the Startup Type to see if it is set to disabled, manual, or automatic (It should be automatic). Change it as necessary (right click the line, click properties, then change it in the drop down and click apply).


3 more replies
Relevance 54.12%

network and sharing center is open, click on sharing and discovery, click "turn on sharing so anyone withnetwork access can open, change, and create files" is checked
attempt to hit apply and get "the rpc server is unavailable....
have done all usual trouble shooting, essentially metaphorically my computer network has no walls as if im in the desert, but i cant go left right forward or backward as no computers or anything are visable on my vista machine. all other 16 networked computers, laptops, ps3's and xbox 360's can see each other and the such. i even have a fedora laptop networked to my 360 for media center... there is no 3rd pty software on my vista problem comuter and the firewall is completely off and still issue continues. i saw in some other posts that ppl were suggesting turning on printer sharing. i can not as i have no printer networked or connected to this computer, its just grayed out.

More replies
Relevance 54.12%

Hello it's Moohy
I am pretty displeased at how my windows 7 32 bit has been performing lately on my end... And no, it's not about speed, it's about many services not starting up, and errors popping out. here is a list of the problems I have (they all appeared at the same
Such as The audio service missing
Can't open Task manager due to pcwum.dll error
Brightness can only be slightly modified
Windows aero has stopped working, and has been reverted to classic
this all happened when I tried restarting my laptop after the pcwum error appeared
Any help will gladly be appreciated
P.s: (I tried checking normal startup in msconfig, and loaded all services, except power, by starting them manually, to no avail)

More replies
Relevance 54.12%

I'm trying to install drivers for my SoundBlaster Audigy 2 ZS, but when the installation starts a message pops up that says:

"The InstallShield Engine (iKernel.exe) could not be launched.

The RPC server is unavailable."

How can I enable or "make available" the RPC server?

Answer:RPC server is unavailable

11 more replies
Relevance 54.12%

Under local services I can't remedy the problem of the RPC server being unavailable. Even after setting it to automatic and setting it to start I'm unable to get the pc to install the printer (note the printer does install to other machines as I tested it with another laptop) I can't start the Print Spooler as well when I attempt to do so I get error 2 The system can not find the file specified.
Thank you for your help in advance.:confused

Answer:The RPC server is unavailable

I fixed this problem with my machine today:-D:
Do this:

1. Open registry editor
2. Make sure that you backup your registry first, then
3. go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\spooler
4. Double click DependOnService
5. Delete all values in box
6. retype RPCSS
7. Click OK...then close registry editor.

Restart your machine.

Hope this helps.


3 more replies
Relevance 54.12%

Now I only know RPC is Unavailable because the SolarWinds WMI Monitor (Points to our DC with Exchange Windows 2008 NOT R2) is telling me so, I have tried most of the check in the services on my XP PC and they all look to be right.
The monitor just occassionally tells me that RPC is unavailable, when I try to ping the server using it's name it isn't there but a ping to its ip address says it is.

More replies
Relevance 54.12%


I'm unable to connect to the internet by either a wireless or lan cable connection, I typed a ipconfig/renew command and got a message that " the RPC server is unavailable". Can anyone tell me how to make the RPC available?
Thank you for your help

More replies
Relevance 54.12%

Im getting this message on my other computer. It will not load my drivers, get online or anything. Any help would be much appreciated. Thank you in advance.

Answer:The RPC server is unavailable.

Try this as is may help, goto start run, then type in services.msc and hit ok, you shoudl then see a service titled RPC, double click on it and make sure it says automatic and is started.

4 more replies
Relevance 54.12%

A few months ago, our printer stopped working.. .unsure why. I bought a new printer (easy fix), HP Deskjet 1050, and went through all of the install, but at the last step, when I connect the USB to my computer (Dell Laptop, Windows XP), it says it cannot finish setup because "RPC Server Unavailable" and on the install screen, it menioned a problem with the Printer Spooling System. I restarted and all that, but to no avail... three hours later, I still need to print docs out... help please!!

Answer:RPC Server Unavailable

Hiya try here,

2 more replies
Relevance 54.12%

Hi -

Upon ipconfig /release or renew it says "rpc server unavailable".

Ive looked at services and and Remote Procedure Call and Endpoint Mapper are started. DHCP says it's "starting". System restore didn't work; resetting IP and winsock didn't work. DCom says its working.

Any ideas?

Thanks in advance.

Answer:RPC server unavailable

Just a guess, but try to stop DHCP and then restart it.
Scan for viruses also - just in case.

3 more replies
Relevance 54.12%

I run XP Professional on my Desktop.

I am currently getting this following error message when using my trados 7 freelancer for translating. (-2147023174): (-2147023174): The REC Server is unavailable.

I cant say that i have done much different with this PC lately, except installed network connection to my laptop that runs Vista. I have AVG as antivirus program (freeware )

Any suggestion what this problem could be caused by - and how do I fix it????


Answer:The REC server in unavailable


1 more replies
Relevance 54.12%

Windows XP Prof SP3
Computer had malware which I have removed using
CCleaner and MalwareBytes
Removed AVG free 8
Installed AVG free 2011 (System now appears Clean)
User complained that he could not connect to the internet. I found that the LAN adpater was not able to gain an IP address and the error after using IPCONFIG /RENEW was RPC Server unavailable. Also found there was no sound as a sound device was not found. When the computer starts I sometimes get an error with ICS not being started and do i want to start it? Say yes and that only error goes away. Have also noticed an error on startup under
Event Viewer\Application\Error - crypt32 (about 6 of them)
My guess is that these are all related to the RPC Server being unavailable. The frustrating thing is that after I try to fix the problem doing various things (inc sfc /scannow) and a restart it works including the sound. Another restart and it fails again. I have not toggled System Restore and feel this may be the problem. I am using the computer now to do this post. I have given it a fixed IP address. Any suggestions?

Answer:RPC Server unavailable

See if this info helps:

7 more replies
Relevance 54.12%

For the past two days When I log-on (to the PC I get the following message:


Register Class Objects failed: hRes= 0x800706BA
The RPC server is unavailable. Maximum retry attempts exceeded.

After being on a few minutes I usually get the following message


The system is shutting down. Please save all work in progress and log off. Any unsaved work will be lost.
The shutdown was initiated by NT AUTHORITY\SYSTEM.

I google the problem but spammy results keep coming up

Answer:The RPC server is unavailable

Held out to be an error caused by damaged system files.
Suggestion to try using System Restore and restore to an earilier point.
I would run the sfc /scannow command myself, since that's the basic cure for damaged/missing system files.

1 more replies
Relevance 54.12%

Been using this Dell laptop for years and been fine!!
Windows XP Pro with Service Pack 3

I did a chkdisc and cleaned up a few things, then all of a sudden, i am having trouble with the RPC Server. A lot of my services have been turned off, and cannot get anything to turn on. ie Skype, Avast etc.

Nothing in my Users listed, cannot download anything but I can surf the Net.

Please help!!! I am fairly computer savey, but cannot seem to fix this!!!


More replies
Relevance 54.12%

My wife installed the new version of Internet Explorer 8. After installing it everything worked properly, but once I turned on the computer the first time after installing the software I start getting the error that I couldn't connect to the internet. the issue was that the computer was "acquiring the network address". After waiting for too long the computer wasn't able to acquire the address.
So I started looking on the internet to solve the problem.
The first thing I tried was using the Command Prompt to check what IP address I had, typing ipconfig. The result I got under IP Address was, so no address. The next step was to use ipconfig/renew. It was on this step when I got the error "The RPC server is unavailable".
The recommended solutions I found took me to the Services window (Undr Control Panel-Administrative Tools-Services) Here the advice was to put the Remote Procedure Call (RPC) on Automatic mode. But the RPC was already on automatic. So what I did was look for other services that were related to the process of acquiring an IP Address. Going through all the list I found the DHCP Client. This one, even though was set up as automatic, for some reason it was stopped. So right-clicking on the DHCP Client-properties, under the general tab, I changed the service status to start. This fixed the whole problem. I am now able to connect to the internet.
I hope this info help someone else with the same problem.

Answer:The RPC Server is Unavailable

Hi and welcome to TSG.
Here is a pretty good guideline for necessary started tasks.
Check your Services are Started on all PCs:
• COM+ Event System (for WZC issues)
• Computer Browser
• DHCP Client
• DNS Client
• Network Connections
• Network Location Awareness
• Remote Procedure Call (RPC)
• Server
• TCP/IP Netbios helper
• Wireless Zero Configuration (XP wireless configurations)
• WLAN AutoConfig (Vista wireless configurations)
• Workstation

Note: You can check the services in Control Panel, Administrative Tools, Services.

All of these services should be started, and their startup type should be automatic (or perhaps manual).

If a service is not running, open it's properties and check the dependencies. Check each of the dependencies and see which one is preventing the service from running. Checking the event log is also a good idea here, there may be clues to what is failing.

The trick generally is not the task itself but the status of the task dependencies that is the killer.
Again,welcome to TSG.We look forward to seeing you post up in the future.

1 more replies
Relevance 54.12%

Hey guys...

I havent bin on here in a while... but yah im having prob's listening to music on my comp... whenevever i go to open my WMP [windows media player] it like just flickers allot and doesnt work.... so i have to CTRL +ALT+DELETE its *** but yah and whenever i try my other proggy for listening to music its like 'The RPC server is unavailable' ......any help TEAM??? haha well ill check up on u guys in a bitt... lets get this shizz solved so i can get my trance going on FEEEL THEE VIBEEE... haha ya cya guys

Answer:RPC server unavailable

check the ms knowledge base because that msg could be alot of problems

6 more replies
Relevance 54.12%

Hi, a week or more ago I disabled a few tasks in scheduler and it was not a problem until this morning, I try to turn on pc and can't get past the log in screen. Google this everyone keeps saying make sure this or that is running but I'm stuck simply logging in?

What do I need to do?



Answer:RPC server is unavailable

Any help?

I have booted into Windows repair mode and now have command prompt up, RpcSs is already running, I tried to net start DHCP client but message "the dependency service or group failed to start"

I flying blind here and don't want to mess this up further.

2 more replies
Relevance 54.12%

Having just refomated my disc and put a another version of XP home, with sp2, on my pc, all works well, but, when I try to reinstal my printer (epson r1800) I get 'rpc sever is not available'. Any help please.

Answer:rpc server is unavailable

Security updates and Patches. This is what Microsoft fix say's.

3 more replies
Relevance 54.12%

When trying to connect to the internet via a cable modem the computer will not connect and says "unable to configure interface....." and that the RPC server is unavailable. Have tried both wirelessly through a Linksys router that is currently providing Internet wirelessly to a laptop and also through a wired connection through the router.Any help would be much appreciated, I am lead to believe that there could be important files missing however this is not confirmed...Thanks in advance,Rick0684

Answer:RPC Server Unavailable will give you something to look at until someone can here=

1 more replies
Relevance 54.12%

Welcome, raindogs&cats. Unless the following words in this post miraculously clear everything up for you it will be to your advantage to start your own thread and describe what you have and what problem(s) you're encountering. We can then try to tailor responses for you.

To check on services: Control Panel - Administrative Tools - Services. Right clicking on a service will give some more options; the one selected above was Properties, and then the Dependencies tab. On that tab you can learn the prerequisites for the service and also what else depends on the service.

that was the last post i saw ... under the dependencies tab it says no dependencies im kinda stumped to what to do

More replies
Relevance 54.12%

I am trying to install Namo Webeditor 4during installation I get an error message : Setup failed to launch install engine.The RPC server is unavailable.I have checked in services and RPC status is started and startup type is automatic.RPC locator startuptype is manual. From what I gather these settings are both correct so I am somewhat bemused.Any ideas anyoneTa PootiePS XPHome SP2

Answer:RPC server unavailable

trying the link to download WebEditor 6.0 Trial Download.See if you have the same problem as with version4 ?click here

3 more replies
Relevance 54.12%

Hi allI am new to this forum. I was installing 2 new XP pro comuters to my office network with a domain. its on a 2003 server R2. I tried to join the domain after i did the initial bootup and after i updated with latest updates for the computer. I get a message stattiing unable to join the net work.... RPC server is not available. Please help me with issue. Same thing happens with the secnd computer thats a HP unit. i could join my domain in past without problems.Please the server working fine and it has about 10 other computers running on it at a given time.ThanksRaj

Answer:RPC Server is unavailable

doc doc, "after i updated with latest updates for the computer". Suspect that's your reason. Any way to undo the update? Suspect it might be happy if you join first, THEN update. Computers are sometime very sensitive to change(?).HTH.Ed in Texas.

2 more replies
Relevance 54.12%

I am trying to install a printer on a non networked PC. When it loads it gives me this error "RPC Server Unavailable". I went into services under admin tools and made sure it was on. Both Remote Procedure Call and Remote Procedure Call Locator are on and set to automatic. Is there something I am missing here? Like I said the PC is not part of a network at all.

Answer:RPC Server Unavailable

Try turning off the XP firewall. That sounds like the culprit. It's in the advanced tab on the network settings.

Er, if this is not a printer share then ignore that. When you go to install the printer is it on an LPT cable or a USB printer?

Is your Spooler service running?

If it's an LPT printer is your LPT port turned on in the BIOS?

1 more replies
Relevance 54.12%

I have a Windows Home Server SP3 (Windows server 2003).

I took my computer over to my cousins house and I wasn't able to share the folder over the network.

I am back at my house trying to fix this now.

I tried various things but still couldn't get it working.

When I open network connections it says (empty)

I can get to the internet and ping my laptop but my laptop cannot ping the server.

Whenever I try and install a new network adapter I get "The RPC server is unavailable"

Also the network connections service says "starting".
When I do ipconfig /all next to the ethernet adapter it has a long hash tag instead of the name.

Anyone know how I can fix this?

Answer:The RPC server is unavailable

Symptom: Your network connections folder is empty.

Hold the Windows key and press R, then type CMD to open a command prompt:

In the command prompt window that opens, type type the following commands, follow each one with the Enter key:

regsvr32 netshell.dll
regsvr32 netcfgx.dll
regsvr32 netman.dll

Reboot the computer.

2 more replies
Relevance 54.12%

My computer is connected to the internet, but i cannot get any page to load. When i troubleshoot the connection i get the error,"DNS server might be unavailable". I have emptied the DNS cache. I have restored the computer to factory settings. How do i fix this?

Answer:DNS server might be unavailable

Try changing the DNS servers to Google's and

1 more replies
Relevance 54.12%

hi, hope somebody will able help me on this one.i have installed windows media centre and i can not connect it to the internet. when i try to install any drivers i get message RPC server is unavailable. does anybody know how to make it work?if i look in network connections there is nothing but when i looked in device manager my ethernet adapter is installed properly i dont understand it. can anyone help me please.

Answer:RPC server is unavailable help please

Try Google or click here;en-us;Q224370

10 more replies
Relevance 54.12%

I've searched all over to find a fix for this problem and have no joy yet. It just started without me doing anything that I know of.
Basically, I can't access other systems on the network. When I try to turn on public folder sharing, I get the error "RPC Server is unavailable". WHen I try to turn on File Sharing, it does nothing but go back to the screen and shows it as 'off'.
So, I actually did some research and there's very little info on it in Vista. I looked at the service and can't see how I can even turn it on or's all greyed out. I'm thinking of doing a repair to Vista which I've never done but there's got to be a way around this. Even turning the firewall off has done no good.
If anyone has any ideas, I'll be very appreciative.


Answer:RPC Server is unavailable

Hi Paul

When options are greyed out, that can often mean you're not currently logged in with administrative rights. You can also right-click the system utility that you wish to use, and select "run as administrator", and provide the administrator password.

I know the following solution might seem obvious, but if everything was working previously (and recently), you can try Vista's System Restore - using a restore point from prior to your connection issues.

As malware has a bad habit of mucking up network settings (in the effort to enlist your PC as part of a "botnet", for example), it's a good idea to run as many scans as you can on as thorough settings as possible. Should you find (or simply strongly suspect) a malware presence, visit the 5-Step Security Checklist here at TSF ---

Should your PC prove malware-free, and System Restore prove to be either ineffective or unavailable, check in the EventViewer logs for entries that coincide with connection failures. And also view Vista networking setup tips from the TechNet folks -- Vista has a few things to look at that weren't around in XP:

Best of luck
. . . Gary

2 more replies
Relevance 54.12%

Had to reinstall Win XP Pro SP2, on Dell Dimension E510, dual Intel Pentium. On the reboot, it recognized the HP OfficeJet G85 printer, but the following error message came up when trying to install the drivers: "Cannot install this hardware, RPC server is unavailable." I check taskmanager, and spooler isn't running (and i don't have lexserver running either), but when I check the system the spooler status is active. Not quite sure what to do at this point.

Answer:RPC Server is unavailable

check it is enabled in services

3 more replies
Relevance 54.12%

I have been having a lot of problems on my Dell (Windows XP), mostly programs not responding. My problem right now is that the "RPC server is unavailable". I am also noticing that javascript or new windows will not pop up for me. What's the problem??? Thanks

Answer:RPC server unavailable

If you (or persons unknown) have disabled Remote Procedure Call try this:

3 more replies
Relevance 54.12%

Got this response on another computer using XP, dont know Service Pack No and dont know what it means except that printer wont work and cannot install it either! What happened and how can it be resolved? Anyone?

Answer:RPC server unavailable

See if this website has the solution for you.

1 more replies
Relevance 54.12%

I cannot access the RPC server. After I log on, I get the error message of

"System Error &H800706BA (-2147023174). The RPC server is unavailable."

Whenever I run services.msc and try to start it from there, I get the message:

"Could not start the Remote Procedure Call RPC service on Local Computer.
Error 5. Access is Denied."

I tried to download AVG antivirus, but it won't install without access to the RPC server.

Answer:RPC server is unavailable

16 more replies
Relevance 54.12%

I'm trying to install a new printer, and it won't install because the rpc server is unavailable. I went into the admin tools then services, to check it, and it is running. I've been trying to research the internet for possible solutions and it seems this is a common problem... but with a very basic understanding of how to navigate through the inner-workings of my computer, i'm kinda stuck. So...

1. How do I check windows firewall for file and print sharing exception?


2. IF that doesn't work, i came across an article saying to:

1. Copy the Spoolss.exe and Spoolss.dll files from another Windows NT 4.0-based server or workstation to the %SystemRoot%\System32 folder on the affected computer.

2. Apply or reapply the latest appropriate Windows NT service pack, and then restart the computer.

3.Set the Remote Procedure Call (RPC) Service to start automatically:
Click Start, point to Settings, click Control Panel, and then double-click Services.
On the Service list, click Remote Procedure Call (RPC) Service, and then click Startup.
Under Startup Type, click Automatic, and then click OK.
4. Restart your computer.

BUT i have no idea how to do either #1 or #2. could anyone explain this for me? Any help would be much appreciated thanks

More replies
Relevance 54.12%

I was trying to access Partition Magic 7.0. It vanished from my Start -All Programs menu but the file still existed in my Programs folder. (At least part of it). I attempted to reinstall it and received the following error message-

"The Installation Engine (ikernal.exe) could not be launched.

The RPC server is unavailable."

It worked fine recently. (No vuruses or spyware)

Answer:The RPC server is unavailable

I recently had the same error when trying to install an ATI video driver except I didn't have the "ikernal.exe" in the message; all I had was the "RPC server..." part. So I did some research at the Microsoft knowledge base and it seems that the RPC error can be caused by anything from networking a printer, to directory migration, to trying to view remote services. In my situation, I had just formatted the HD and done a clean install of XP (well, not really 'clean' because there were a couple error messages during install due to a bad CDROM drive) when I got the error. I ended up reformatting and reloading XP again (this time with a different CDROM) and everything was OK after that; the ATI driver (and all others) installed perfectly. I know this isn't a whole lot of help, but I'm still researching it and if I find anything of use, I'll be sure to post it.... good luck!


1 more replies
Relevance 54.12%

Can anybody help me. My PC was fine but now I cannot connect to the internet. I use broadband but I just keep getting a message 'searching for IP address'
i rang the helpline and this is what happened

Run - ipconfig = everything was blank
Run - ipconfig/renew = RPC Server unavailable
Run - service.msc (i think) RPC server says it has started.

Helpline now just says its a 'windows problem' but did not seem to be able to tell me how to sort it out!!!

I am running Win XP home with service pack 2
my network adapter is a realtek (something)


Thanks in advance

Answer:RPC Server unavailable

can you do a system restore to before it happened ?

7 more replies
Relevance 53.71%

"DHCP server unreachable" error message.
Could you please help me?

I have a crossover cable between my laptop and my home PC, with my laptop as the main computer. I have the laptop IP set to, and the Home PC to 'Obtain and IP address Automatically'.

This set up actually worked for some time. Sometimes, when I open up the command prompt and type in 'ipconfig', it gives me a 168.xx.xx.xx address, and I just type in 'ipconfig /release' and 'ipconfig /renew' and after a minute of waiting, I used to get a 192.168.0.XX address. After this, I was able to share the Internet Connection between the 2 computers, the files etc.

But of late, I have not been able to get this 192 IP address. After typing in 'ipconfig /release' and 'ipconfig /renew', after a minute of waiting, I get a "DHCP server unreachable" error message.

I have tried restaring the PC etc etc, but I continually get this same message. I can ping from the Home PC if I put in a address on the Home PC, and I can even share files.... but I am NOT able to share the Internet connection!!

Please suggest what needs to be done. Thank you!!

Any help at all is welcome.

Answer:"DHCP server unreachable" error message.

perhaps ur IP has detected this. Could this possibly be not allowed by ur ISP? If so, your ISP probably did something to keep you from doing this. Also, for better results, use a router it works much better and you are usually always garunteed 100% uptime and no problems.

3 more replies
Relevance 53.71%

I am a beginner and know very little so please take this into consideration.
I am using Windows 7.
When I start up my computer and type in my User name I get the message that RPC server is unavailable. I really dont have a clue what RPC is, why I'm suddenly getting this message when i have done nothing differently and how I go about sorting it. Can anyone help! Please!

Answer:RPC server is unavailable on start-up

9 more replies
Relevance 53.71%

I get this error message when trying to print to a shared printer connected to another machine, now my first thought was that she was trying to print when the other machine was off b/c of the times in which it stops working (after 5pm or early in morning). However, my boss informs me this is not the case, I am thinking maybe a firewall or sharing issue but, it may be something else. Any Ideas?

Answer:The RPC server is unavailable when printing

This can occur if you have only one DC (domain controller) and it does not have file and printer sharing enable on its network card.Click to expand...

1 more replies
Relevance 53.71%

I just completed a session in the Hijack This section of TSF with Ried. He did an excellent job.
I now have another problem I think pertains to this forum and he has referred me here.

I have an HP 1400 series printer connected to this system which had been working fine for at least a year with no problems. A day or so after the malware cleanup I attempted to print a file and when I switched the printer on, Windows announced it had found new hardware. Windows even identified the device as the 1400. The install hardware wizard came up and I proceeded through that process. The wizard halted with an error message that included the name of the printer and "an error occurred during device installation. The RPC server is unavailable." I thought I would try to re-install the software from my printer disc. This did not re-establish the printer.

I think the RPC server is a service that may have been disabled or obliterated either during cleanup or I could invent any number of likely scenarios.

I did a google search with keywords download Microsoft print spooler, since at least one error message might have contained the word spooler. There is a Microsoft Knowledge Base article having to do with a vulnerability involving the print spooler or the server. I downloaded the fix offered just in case I had not done so with Windows Automatic Updates. At this writing, the printer is still seen as new hardware and the hardware wizard will not complete.
If y... Read more

Answer:RESOLVED: RPC server us unavailable

RPC Server is a service configurable via Administrative Tools. Think it should be set to "Automatic".

I would uninstall the HP printer software, reboot and then reinstall.

16 more replies
Relevance 53.71%

I have been having this issue. I came to my PC the other day and I couldn't connect to the internet. My first thought was to reset my modem/router. Did so and no changes. (This PC is connected directly to the modem). My phone and tv were connected to my WiFi so I checked the other PC directly connected and it was still connected to the internet. So I checked my network connection and it was showing limited or no connectivity. I tried to repair and it said IP address could not be renewed. So I tried to go into the command prompt and renew it. Thats when I got the error RPC Server is unavailable. I had never seen that error before. I did some research tried a few things and nothing seemed to work. I then figured I would try to access a prior system restore point. Well that worked but when I restart my PC it does back to having this issue.

The only thing I have done recently which I figure may have caused an issue was plug a laptop SATA HD into one of the slave spots. Needed to remove some files from it. I have done this before without any complications. I can't think of anything else that I have done differently.

Answer:[SOLVED] RPC Server is unavailable

Go to Start/Run and type services.msc and press enter. In the Services window, scroll down to Remote Procedure Call (RPC) and double click it. Make sure the Startup type is set to Automatic and that the Service is Started. You may need to start the DCOM Server Process and the RPC Endpoint Mapper as well.

19 more replies
Relevance 53.71%

Hi all,

I'm wondering if you can help. I have been printing from a networked PC & have had no trouble at all in doing so.

Today however the PC in question keeps throwing up the error message 'RPC Server unavailable' whenever I try to print anything?

Your help & advice is greatly appreciated.


Answer:Solved: RPC Server is unavailable

Try restarting the Remote Procedure Call Service.

2 more replies
Relevance 53.71%

I keep getting this popup and it says 'The email server is currently unavailable!'. It happens regularly but not all the time and sometimes all at once. You know like buses! Thanks for your help in advance!

P.S It seems as though it's nothing to do with the email client.

Answer:email server is currently unavailable!

Quote: Originally Posted by Obsidian

I keep getting this popup and it says 'The email server is currently unavailable!'. It happens regularly but not all the time and sometimes all at once. You know like buses! Thanks for your help in advance!

P.S It seems as though it's nothing to do with the email client.

That usually means that the service that provides the email is having problems. Go to their website see if any mention is made of a problem.


9 more replies
Relevance 53.71%

Hello all,
I just finished building my computer, specs below, and im having a problem getting the internet to work. When ever i release and renew my ip it says dhcp server unavailable, i tryed reinstalling the nic driver , removing and adding my tcp\ip protocol,tryed a different nic to but i get the same problem so im just not sure what else to try
O and im running 98se

Thanks for your help


Answer:dhcp server unavailable?

8 more replies
Relevance 53.71%

I got this error msg when I attempted to launch a full system backup using Acronis (True Image Home 2010). I "Googled it" and found this forum!! This very thread was posted back in Aug 08 by AbsentHarvest, and dealt with not being able to share files between his PC and a laptop. The "fix" was to look in the Services listing accessed via Start ->Run-> Services.msc, and confirm that Remote Procedure Call was "Started" and set to "Automatic Startup" (right-click and open Properties if not).

My Acronis problem was not solved at this point (because RPC, in my, case was on & running), but selecting the "Depencencies" tab at the top of the Properties Window showed that the "Acronis Scheduler2 Service" DID/DOES depend on RPC running.

This (now) obvious connection between RPC and the Acronis Scheduler2 Service (even though the actual error message was misleading) "turned on the light" for me: I remembered turning this Acronis service OFF a few weeks ago (via one of the Startup Mgr utilities), thinking it was involved with scheduling/running Acronis backups automatically. (I thought I had perhaps selected this option by mistake during the Acronis setup procedure.

So, it was all somewhat "fortuitous", but turning Acronis Scheduler2 back ON/Automatic did solve my problem, and the backup ran successfully!!

Now, having said all this (and perhaps it will be useful to someone), this is my first post... Read more

Answer:Solved: RPC Server Unavailable

Welcome to TSG.
looks like your name is already corrected.

And you are correct. Using Acronis for backup, I also forgot that I stopped it and had to click on it again in msconfig and the Timeout monitor monitor under the Startup tab.
thanks for reminding us.

1 more replies
Relevance 53.71%

I had a problem with my XP system suddenly seeing my external firewire drive as letter H, when I needed it to be 'G'... This is a job for ComputerManagement--/ Disc Management.. After failing and reading up, I discovered you must:
make sure:
--you have your TCP port enabled in Windows Firewall.. A whole other subject....
--Make sure you have the correct Windows Service enabled and STARTED, such as RPC (Remote Procedure Call)
--enable the DCOM tunneling, (go to Start and then Run. Write DCOMCNFG and then click on the Component Services. From the component services, go to My Computer and choose Properties. After this, turn to Default Properties tab and then Enable DCOM.

More replies
Relevance 53.71%

Hey all this is a somewhat complicated problem.

I had a stubborn rootkit virus that I was finally able to remove after 8 hours and several different anti-virus scans.

Once finished I re-booted and found I could not log on to the internet. I tried Start> run> ipconfig/renew and received the following error:

No operation can be performed on Local Area Connection while it has its media disconnected.
An error occurred while renewing interface Wireless Network Connection 2: The RPC server is unavailable

I went to Start > Run > Services and located the Remote Procedure Call (RCP) and the Remote Procedure Call Locater services and set them both to start automatically.

DCOM Server Process Launcher
and Wireless Zero Config are also both working and set to start automatically.

I rebooted to the same problem. There are no dependencies for this service, and they appear to be running properly but I still get the RPC Server is unavailable message.

Could I have inadvertently deleted a vital registry during the anti-virus scans?

The last ditch effort is to do an XP install repair, but I'd rather not if I can avoid it.

Any help would be appreciated. I've beet at this for HOURS.

Thank you!

Answer:windows XP says RCP server is unavailable

Hello,Please follow the instructions in ==>This Guide<==. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.If HelpBot replies to your topic, PLEASE follow Step One so it will report your topic to the team members.Orange Blossom

2 more replies
Relevance 53.71%

I'm running Win XP Home EDition and I'm logged on as the Administrator. Everything was working fine then all of a sudden I received errors "No printer installed." There is no printer showing to uninstall.

I've tried to add my Epson printer using the "Add Printer Wizard to add the printer, received error message "Operation could not be completed."

The hardward wizard states there was an error during installation "RPC server is unavailable."

Device Manager shows no problems but no printer installed.

Answer:RPC server is unavailable."

try going to the start button, go to run| and type :
services.msc. after this, look for remote procedure call service or something like it. check to see if there is anything abnormal wit' this service.

2 more replies
Relevance 53.71%

The computer i'm using now, is a stationary computer. (Zero)
It's directly connected to the router. My laptop connects to the router wirelessly. I have no problem sharing files on the laptop. Zero, the stationary computer can access the files on the laptop. However, it won't let me share files to my laptop. (or share in general).

Stationary Computer (Zero) Running OS: Vista Basic
Laptop/ Running OS: Vista Premium

So, instantly I looked around online and I've found that this has occured through service pack upgrades etc. This computer is brand new, I had purchased it a couple of days prior to this posting.

The key problem. Is that the File Sharing won't enable. (SEE RPC ERROR/jpg)
As you can see, there is a message indicating that... "The RPC Server is unavailable".
I have checked my firewall settings. (ZoneAlarm Free Firewall) Sharing is allowed.

So, I've looked around some more, and I found that people are having trouble with the service itself. I open Services (As Admin) and look at the RPC service. It's automatic and has started. However, it won't allow me to restart the service, or edit it in any manner. (SEE RPC SERVICE.jpg)

Both computers are WORKGROUP, they're both named and both are Public Network. I'm stumped on this one. It has no problem accessing shared files, however I cannot share files in return which is required, this issue is important.

Any suggestions or solutions are welcome, thanks.

Answer:Solved: The RPC server is unavailable.

9 more replies
Relevance 53.71%

My daughters computer is losing the internet connection after 10 o15 minutes online. A message will appear:
brand____product version Error Connection to service failed. Please reinstall brand product version.
I've tried doing a network connection repair by typing in the command prompt: netsh int ip reset resetlog.txt and that's when I get RPC Server Unavailable.
Netgear 54 Mbps Wireless PCI adapter wg311v3
Belkin G router
Dell Dimension 4600
Win XP Home
80 gb HDD
1.25 Memory
I've gone in Services but have not found RPC Server. I've seen RPC Locator. I've checked the properties of that and the dependecies and re-started this program.
The router and modem is just on the other side of wall from where the computer is, about 15 ft.
One other thing, the cmos batteryl must be needing changed because the time has been showing 2004. I change the date and time back but within a week, it's back to 2004 again.
Any suggestions!

Answer:Solved: RPC Server Unavailable!

12 more replies
Relevance 53.71%

Hello all!

I am not a "computer" person, so I hope you will be patient with me. I have an accounting system on my computer for travel agencies. Friday afternoon I started getting the following error: "System Error/Code: 1722/RPC Server is Unavailable". I an unable to access or run any of my reports out of the program. Last night I completely shut the whole system down in hopes it would be okay today. Unfortunately I have the same problem. I have called the organization that we purchased the software from and they said they have never seen that error before. Do you have any suggestions on what I can do to check this out??

More replies
Relevance 53.71%

After installing several WIN 7 updates I lost my audio, (Creative Audigy).
In checking the services, I found that when I try to start the Audio service, I find that all dependencies are working except, "Windows Audio Endpoint Builder"

When I try to start it, I get, "ERROR 1722 RPC Service Unavailble"
In checking RPC service I find that it is running.

When I disable the Audigy and use the Motherboard audio, I get the same result, no audio.

Anybody have an idea? I have checked many forums, even Microsoft, to no avail.

Answer:No Audio and RPC Server Unavailable

Hi Vamark,
If you have no audio at all, it must be the drivers. If audio works with everything else, I found you a possible solution from this forum:
"Windows Audio Endpoint Builder" service will not start

3 more replies
Relevance 53.71%

Whilst trying to download images to Windows XP from a digital camera the above message appeared. I've no idea what to do about it, it's the first time the message has ever come up. What do I do?

Answer:the rpc server is unavailable message

check control panel/administrative tools/services/ and scroll down to "remote procedure call",double click and set to automatic from the list in the drop down box.set "remote procedure call locator" below the above to manual.try also setting the print spooler service to automatic also if your having problems there.restart the computer to take effect.

3 more replies
Relevance 53.71%

My audio device has stopped working. The audio service has stopped and will not restart with error 1068 Dependency or group failed to start. Audio Endpoint builder reports RPC server is unavailable. RPC, RPC locator and RPC endpoint mapper are all started: Audio device is installed and reports driver is working properly (Its a firewire Presonus firebox) I have un-installed and re-installed it. I read a report saying Java install could be a problem so I have un-installed it. I have recently installed a NAS device, but the Audio has worked perfectly for days since the installation. I haven't found anything else that doesn't work so-far, despite the fact that there are lots of dependencies listed for RPC. I have rebooted the system several times to no avail.
Help! I cant watch my Family Guy DVD's without audio!!!

Answer:Solved: RPC server unavailable.

7 more replies
Relevance 53.71%

I get this error trying to install my newest Video Drivers

And another when trying to click on a picture link

I've gotten a couple others here and there, usually when trying to install something.
I made sure I have the RPC set to Automatic and it is started, I even tried restarting it.

I don't think I have any spyware running or anything, I've ran Spybot and Adaware.

I looked at this

but when I checked my registry everything seemed to be in order, I think. I'm not real sure, but I don't want to go down that road and royally mess everything up.

Anyways, I also tried to
Start | Run
type in net start rpcss
click OK

I got the cmd box to popup, but nothing was fixed. Every road I've went down has came to a dead end. I could easily do a reformat, but then I'd have to transfer a good 70g of files to my other computer, which would be a royal pain that I'd love to avoid.

Any ideas that I may have missed would be helpful. Cheers.
Edit - My DxDiag just in case it might help.

Answer:RPC server is unavailable. Yes, I did a search.

6 more replies
Relevance 52.89%

I have set up an Exchange 2010 server on Windows Server 2008 R2. When running the Outlook Connectivity Test at, everything appears OK except for the last stage:

Attempting to ping the MAPI Mail Store endpoint with identity: mail.[domain].com:6001.


The attempt to ping the endpoint failed.


 Tell me more about this issue and how to resolve it


Additional Details


The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process.
Elapsed Time: 5037 ms.

I have checked the firewall on the server and port 6001 is open. I have tried awarding port 6001 to the server from the router. still no improvement. I am somewhat new to the exchange server scene so the tech net link above didn't make an awful lot of sense. 
what else can cause this sort of error?

More replies
Relevance 52.89%

HI, I have 2 separate HDDs on my PC, both were running Windows 7 (home and pro)

I decided to upgrade 7 home to the free windows 10, after a lengthy install it completed fine. However when I rebooted my PC to get into 7 pro a login prompt appears before desktop starts saying " rpc server is unavailable "
Ive tried using the repair cd for startup errors

Checked sfc - all files ok
Im unable to get into 7 pro since installing 10... on a different drive.
I am able to access files within 7 pro's HDD *via* windows 10's desktop if this can solve anything.

More replies
Relevance 52.89%

RPC server is unavailable when I keep trying to update my clock on the PC, no matter what site I try, I have tried to disable the AV proggie but still get the same error message, any other suggestions, thanks in advance

Answer:rpc server is unavailable when trying to updat PC Clock

Wow i guess no takers on this one, LOL

8 more replies
Relevance 52.89%

When trying to open MS Exchange Server the following message appears: : ?Your Microsoft Exchange Server is unavailable.? Any recommendations?

Answer:Microsoft Exchange Server is unavailable

Wat email application are you using? Windows Mail, Microsoft Outlook, Thyunderbird, etc.? Has it been configured for your email account? That message usually means there's a problem with your client's setup and less often by an actual problem with the server.

2 more replies
Relevance 52.89%

Internet Service
Default Outlook Express Mail Not Configured
Default Outlook Express News Not Configured
- Internet Explorer Web Proxy WMI Error FAILED
Unable to connect to WMI namespace 'netdiagnostics'
Computer Information
- Computer System WMI Error FAILED
Unable to connect to WMI namespace 'win32_computersystem'
+ Operating System WMI Error FAILED
Unable to connect to WMI namespace 'win32_operatingsystem'
- Version WMI Error FAILED
Unable to connect to WMI namespace 'win32_operatingsystem'
Modems and Network Adapters
- Modems WMI Error FAILED
Unable to connect to WMI namespace 'win32_potsmodem'
- Network Adapters WMI Error FAILED
Unable to connect to WMI namespace 'win32_networkadapterconfiguration'
- Network Clients WMI Error FAILED
Unable to connect to WMI namespace 'win32_networkclient'

More replies
Relevance 52.89%

I'm trying to manage a large number backups for Windows PCs using Acronis 11.5 but I've constantly been getting an error on Windows XP machines that is preventing me from doing so.  I came across the error through cmd using ipconfig /registerdns
and it is "RPC server is unavailable" which only happens on select Windows XP machines. 

I have checked The RPC service is set to start automatically and is running.  I've also checked that the registry files and they are there.  The event viewer has no errors relating to RPC (quite a few relating to WMI however).  I have
checked some other things I just forget what they are so if you suggest it I can try it again.

More replies
Relevance 52.89%

When trying to open MS Exchange Server the following message appears: : ?Your Microsoft Exchange Server is unavailable.? Any recommendations?

More replies
Relevance 52.89%

My RAID0 pair of discs failed after 8 years service on my P4P800-E. I have replaced them with a RAID1 pair. After some effort (I'm not an expert) , I have managed to configure the new HDDs and to reload XP Media Centre edition onto the system. Next, trying to use the motherboard CD to load drivers etc I immediately come across the message "RPC server unavailable" (the same message also came up towards the end of OS installation when Windows installer tried to install a printer ("How did it know what I had in the way of a printer?" I ask myself)). Also had the message that may be linked: MAPI32 was not found.

I'm puzzled by all this as I have installed XP on a couple of machines in the past and have not tripped up over anything so difficult to resolve.

I have now added SP2, but not SP3 yet. Neither Memory modules nor Video Card were changed in this HDD re-installation. No other software has been loaded.

I have tried Googling the topic and I see RPC problems seem somewhat common; however I either cannot relate the details to my circumstances or do not understand the answers.

I would be very grateful for advice.

More replies
Relevance 52.89%

I wonder if anyone out there can help me,
Iím having a serious problem with my Pc.
It all just happened out of the blue.
I will explain the symptoms.

When I switch my computer on and try to click on a program, I get one of the following errors:
the interface is unknown or
rpc server is unavailable
I canít access my computer, any files or any internet connection.

Iíve tried a system restore with my Win 7 disc which didnít work
I tried repairing it with my Win 7 disc and the first time it worked.
I managed to get on and do everything I needed.
Once reset the whole thing started again, but this time with the following error::
user profile server failed to login.

So I reset and it starts up and goes back to a vicious loop whereby I get the interface is unknown or rpc server is unavailable, if I try to do something it usually restarts itself or if I leave it, it restarts around 10 minutes later.
After about the 5th or 6th restart. it's back to normal, only to start the loop all over again after the next shut down/reset

The Win 7 disk wonít repair it any more.
Bare in mind it starts ok in safe mode, but I havenít installed anything new or made any changes in a while, so I donít know what Iím looking for.
Does anyone have a solution?

Answer:the interface is unknown/rpc server is unavailable/

If the system is running without issues in safe mode, I would first suggest trying a Clean Startup and determine what is causing the problem. If that is a No Go, you could try a Repair Install No data would be lost in this.

1 more replies
Relevance 52.89%

I have a user that has not been in the office or logged into his comp in about 3 months. I opened his Outlook (2000) and it said "Microsoft Exchange Server unavailable... The Server containg the Global Address List is no longer available". I am running Exchange Server 2003 b.t.w. - Where do I begin here? I can't even get into his Outlook.... HELP!!!!!!

More replies
Relevance 52.89%

I have a small network I run at home, 3 xp Machines, 1 Vista Ult, connecting to 2003 Enterprise Server. The server is only being used to run Apache, MySql, PHP, and as a file server. There is no domain set up. Only the Vista isn't from my MSDN Universal Subscription. If I turn off the server for whatever reason, once I reboot a machine, it's gone from the network, but will immediately reappear once the server is back online. Is this normal behavior? On the machine I work on all the time, I get the message Network is unavailable, you may not have permission, etc. It doesn't even show up itself in networking until the server is back. Is this default behavior when there's a server in the network?

Answer:Network unavailable unless server is present

9 more replies
Relevance 52.89%

At this time, July 9th, 11:00 AM EST, neither my nor my collegue's Lenovo Thinkpad X60s's can connect to the Package Index Server. Is there an unscheduled outage? Moderator Note; please update your profile with your correct country location as per the forum rules. Products, options and services vary from market to market. Knowing your location helps us help youMessage Edited by andyP on 07-09-2008 05:17 PM

More replies
Relevance 52.89%

HI i have a wireless router but my laptop wont connect, it says dns server unavailable or unreachable, im with aol who dont have the right answers, could someone pleas help its been 5 days of trying, my laptop has a built in wirless connection, my router is a thomson speedtouch 576, my laptop picks up the name of the router, but a pop up says little or no connectivity,

Answer:dns server unavailable or reachable - help needed

<<< a pop up says little or no connectivity >>>That suggests that the wireless adapter hasn't been able to get its IP address from the router and Windows has allocated an address in the 169.254.x.x range, which won't let you get online. Have you actually "connected" to the router? If you run the adapter's software, the Site Monitor should look for "Available Networks" to connect to. When it finds the one with the SSID (network name) that matches your router's, you "connect" to that network and the little icon should then get a "halo" to show that it has connected.

4 more replies
Relevance 52.89%

While I am Taking a print out, the error appear show that "RPC server unavailable"

I am using XP operating system.

Can anyone tell me how to fix up this problem

Answer:RPC Server Unavailable while taking print out

Hi and welcome to TSF!

Here's a couple of things to try.
1: Go to Start -> Run and type in 'services.msc' (no quotes). Scroll down and try to find 'Remote Procedure Call (RPC)'. If it says stopped, click on the 'Start the service' on the panel to the left. Then double click its entry in the 'Startup Type' column and set it to 'Automatic'.
2: If that doesn't work or you can't find the RPC entry, post back and then we can try some registry changes. (I didn't post the registry changes yet because modifying the registry may leave you with a unusable Operating System which needs to be reinstalled)

1 more replies
Relevance 52.89%

so sorry. posted in the wrong part. my laptop is a windows XP (inspiron b130). sorry too frustrated after the malware protector 2008 thing and now this. if the admin can move this to the rt place please? sorry and thank you.

i found out my RPC server is unavailable when i saw the clock is all wrong. keep giving me the time in this standard 00:58 but the time was 1:05am. that and when i tried to clean my hard drive, it tried to configuration "microsoft ....something 2003" and told me that it can't detect SKU112.CAB. couldn't find it anywhere. i think i must have delete some files i shouldnt have or during the malware protector 2008 removal process something occurred. that and now all of a sudden i have more than 3/4 of free space on the disk while b/f that i have more than 1/2 of used space. the microsoft support center didnt help much. so please help me out. would really appreciated it.

ps: now it doesnt prompt me to confirgurate the microsoft thingy anymore or tell me that the is missing but i would still like to know what was wrong and how to deal with it anyway in case something like this happen again.

More replies
Relevance 52.89%

my mates pc had the blue screen of death, I've managed to get it working again. I downloaded the drivers for the modem and network utility from the dell site but when the setup installer for the drivers runs it comes up with RCP srever unavailable and quits the installation.
Can anyone explain this for me and/or give a solution?

Answer:rcp server unavailable during driver installation

are you running the application locally or over the network from another computer?

3 more replies
Relevance 52.89%

Hi all,

Just getting my drivers updated before installing a second graphics card.
After doing what looked like installing all of the files it gives me the error in the screen shot attached. "RPC server is unavailable".
I've read through the previous thread about this located in the following:

There was a very handy section that read :-"I found the problem. The RPC server is unavailable because the service couldn't function properly because it's dependancy (server service) couldn't start... I checked the dependencies through the server's properties and I looked through services and started those required dependancies to start the server service, once that started... Everything functioned properly. Sorry, didn't mean waste the thread. I just hope this thread will come handy to those who stumble upon it through google with a similar problem. xD"

Thing is, when I look in the dependencies of any service it tells me there's none?? >.<
I wonder if this could be something to do with a windows update issue of some kind (which I do have a couple of).
Need these drivers installed, I've tried a mental amount of first line fixes.

Any help would be much appreciated.

Answer:The RPC server is unavailable, follow on from last thread.

6 more replies
Relevance 52.89%

i just installed windows server 2008 in vmware workstation and the virtual nic card is not listed when i go into the network and sharing center, what can i do to get the ethernet interface to show up

ps. this also happens when i install it on a real machine, the network interfaces aren't listed. is it the os or do i need to provide windows with drivers for the ethernet ports

More replies