Computer Support Forum

Which 250Gb HD should I go for?

Question: Which 250Gb HD should I go for?

As the subject line says, I'm looking for a 250Gb HD to add a second HD to my main PC.Any suggestions/recommendations?Cheers

Relevance 100%
Preferred Solution: Which 250Gb HD should I go for?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Which 250Gb HD should I go for?

That it's an E-IDE drive that I'm after, not a SATA one.

8 more replies
Relevance 45.51%

Hi, I want to buy a new hard drive for my desktop PC, and I was wondering if the western digital black 250GB hard drive or western digital enterprise 250GB hard drive would work better for such a PC. Both of the HDDs I mentioned are SATA, in case you're wondering.
 

Answer:Solved: western digital black 250GB vs. western digital enterprise 250GB

13 more replies
Relevance 38.54%
Question: 250gb and beyond

Hi all first post and yep theres a problem.... first the specs
MSI 915P Neo2 Platinum board
64bit amd chip
2gb crucial ram 3500
MSI FX5900SP VTD256 ddr
100gb ide
deskstar 250gb ide
deskstar 250gb ide
3 yamaha scsi dvd writers

quite a simple problem you would think....i need both of the 250gig drives to be unpartitioned ( os on one drive). so its down to the 137gb problem. all of the solutions i have read so far is based on the sp1 and sp 2 route .I.e format the drive at 137gig then install windows xp pro and, then update with the pro pack and the drive should be showing at 250gb , im not having too much luck with this approach has anyone any other ideas ?
 

Answer:250gb and beyond

7 more replies
Relevance 38.54%

I wanto buy a samsung evo 850 ssd which is expensive for my budget but i think itll be worth it...
I need advice as i dont know if i need the 500gb as opposed to the 250gb.
Ill only be having my os and a maybe 2 games (overwatch and league of legends) and ill only be watching youtube and movies and doing homework via microsoft office. Will 250gb run out easy if i get it?
Thnks in advance.

More replies
Relevance 38.54%

Hi guys, I want to connect my ps3 hard drive on pc to use it on pc, so when I get my new computer I can use it with it straight away, but right now I want to use it on my current pc, I plugged in both the one cable and the other one (sata), that goes from power supply cable to the HDD.

when I booted the pc it said installing device drive software, and said, device is ready to use, I go to my computer, and it ain't there, do I have to set it as secondary in bios?

Win7 Ultimate final rev

It's automatically set as fourth IDE master. restarted pc and still doesn't show up, I heard I need to format, is that true? like that to know if I should re-gain windows 7 disk

Oh and t's actually 320gb
 

Answer:250gb hdd ps3 on pc?

Open up Disk Management (in the admin tools control panel), it should show up in there. I'd delete all the partitions and create 1 new one that incorporates the whole disk. Then format as NTFS.
 

6 more replies
Relevance 38.13%

Hi
I have looked through previos questions but couldn't find a solution. I have a 250g USB driven HDD not recognised by ny PC. I used the HDD on my TV so I think it will probably need reformatting. When plugged in it appears in Disk Management but without a drive letter and when I right click on the drive most of the options, including allocate letter are greyed out. Any solutions?
TIA

Answer:USB 250GB HDD not recognised by PC

I would recommend PartedMagic, it is now paid for software, but at only $4.99 it is a sound investment. Download it, burn it to a cd or put it on a USB stick and boot from it.
Have the suspect drive connected and PartedMagic should be able to see it and it will enable you to format the drive, whatever the existing filesystem is.

4 more replies
Relevance 38.13%

Hi,

I'm sure this is simple, but I can't figure it out and searching google hasn't found me any answers. I am building a new system. It all works fine. But I have a WD 250GB hard drive I"m using. When I boot from WinXP Pro CD, and go to format the drive and install the OS, it only tells me I can format 130GB of space. Nowhere to be found is the rest of my drive...

Any thoughts as to what I"m doing wrong here?

Thanks!
Kimberly
 

Answer:XP won't format whole 250GB HD

Hi, if the version of Windows on the install CD pre-dates Service Pack 2, you will get this problem.

Microsoft added the ability for Windows to see hard drives bigger than 137 GB in Service Pack 1 (and Service Pack 2).

If you have access to another PC, download Service Pack 2 (which includes Service Pack 1 btw), and integrate it into your install source and burn a new CD from which you can install. You can find good instructions for doing that here:

http://www.winsupersite.com/showcase/windowsxp_sp2_slipstream.asp

You can download Service Pack 2 (full 266 MB package) from here:
http://www.microsoft.com/downloads/...BE-3B8E-4F30-8245-9E368D3CDB5A&displaylang=en

As a workaround, you can create a partition less than 137 GB, install Windows, and then install Service Pack 2 and you will be able to access the rest of the hard drive. Then you can partition the rest from the Computer Management interface (right-click "My Computer" > Manage...)
 

2 more replies
Relevance 38.13%

hello,i have installed a 250GB Western Digital Caviar HD on my system. but i cant seem to get the full 250 GBi have installed XP PRO and service pack 1 but its showing 233GB and it says that its using 106 GB i dont know what to do to have the full 250GB showing, you guys have any pointers pleasethanksVJP4 3.2Ghz HTAsus P4 C800 E-Deluxe512mb PC3200 DDR RAMSapphire All In Wonder Radeon 9800 ProWestern Digital 250 GB Hard DriveAntec 350W PSU

Answer:cant get full 250GB

The drive manufacturers reckon a kilo is 1000 (reasonable, I suppose), but the rest of the computer world regards it as 1024.So a 250Gb drive is 250/1.024/1.024/1.024 = 233Gb.

2 more replies
Relevance 38.13%

Hi

I've recently reinstall a fresh copy of XP Pro, I got a Gigabyte 8inxp MB, a WD 250GB install on primary channel as Master, with 2 partition, 125GB each

I've also got a Maxtor 250GB connect to ATA133 card

Before, I got everything up and running , then I install Maxtor drive, card, and Maxblast 3

and I have drive C = 125GB, D = 125GB, and G = 250GB(this is the Maxtor)

then I do a boot-from-cd and install a fresh copy of XP Pro
now I cannot see my Maxtor

I tried to use my Maxblast3 software to mount the drive, but it say it only detect the Windows drive, therefore it won't let me run

When I tried to run Maxblast3 in DOS (from a floppy), I have to format and erase everything, I don't want to do that, I have some important documents on that drive that I do not want to lose

all drive were NTFS
 

Answer:Cannot see my Maxtor 250GB

10 more replies
Relevance 38.13%

Maxtor 250

Just put a Maxtor 250 GB into my mate's machine, Maxblast3 will only let me have 137GB, Windows XP will only see it as 31.4GB. I've managed to partition & format it in my own machine correctly but when I put it back in his, it F***s up again

I've updated the Via 4in1, the bios is already updated to the latest version

I'm guessing a new MB is in order ??????
 

Answer:Maxtor 250GB seen as 137

i've had that 2 with my 200Gb, windows only allowed 138Gb
do you have SP1 installed cuz that seemed to do the trick on with my 200Gb


:grinthumb The best of Luck :grinthumb
Greetz Selage
 

10 more replies
Relevance 38.13%

Hello, I'm hoping I can find a solution to my problem here as I couldn't find one elsewhere on the net.
I have a laptop and currently have a 120GB hard drive in an external enclosure. I have just bought a new 250GB hard drive and have installed it in the external enclosure. Though partitioning and formating the 120GB was a breeze, I've had nothing but problems with the new 250GB.
Below are the specs of what I'm working with. In both Partion Magic and in the Win2000 Disk Management, it correctly displays the 250GB drive (233GB). Regardless of which program I use (ie. Partion Magic, Win Disk Management, command line FORMAT) I get problems.
Generally, what will happen is it will partition fine. Then it will begin to the formatting process (VERY slowly) and then either throw an error either during or at the end of the process. And this is when I try to format a very small partition (ie. 100MB). I have successfully formated a 10MB partition. On a large partition (ie. 30GB) the format process will start but will not progress.
The only two things I can think of is that the drive is faulty, or because I am booting my OS from a floppy there is some sort of recognition problem.
I can't run the diagnosis software from Maxtor because that requires the drive to be installed internally.
So any help to this problem will be greatly appreciated.
Additionally, how long should it generally take to format the 250GB drive in its entirety?

Comp: Toshiba Satellite 2805-S201
OS: Win2... Read more

Answer:What's with the 250GB Drive

HHhhhhhmmm...sounds like a bad drive to me. Do you have a desktop computer that you can use to attempt to format the drive??

4 more replies
Relevance 38.13%

I've been looking at some of the features in Samsung Magician, and ran the Benchmark test twice. Both times I got very high scores, above the max listed in the program for all 4 tests. I have the drive set to MAXIMUM RELIABILITY. Just wondering about the scores reliability.

Scores in Parentheses are Samsung 's listed maximum high:

Sequential Read
549 mb (540)
Seq write
532mb (520)
Random read
97442 (97000)
Random write
70189 (66000)
 

Answer:Samsung SSD 840 EVO 250gb

Benchmarks are artificial at best [and a benchmark from the mfg is tailored to that particular piece of hardware] I would think you would get different results using a another benchmark program such as ATTO.

In short do not put too much emphasis on any given benchmark. Modern ssd drives are reliable and it should last for quite a while so I would not worry about the drive.
 

3 more replies
Relevance 38.13%

I have two 250GB hard drive in my pc and I'm trying to install Windows XP Pro SP2. It's running on an Abit motherboard with Athlon 64 dual core 4400+ CPU. I got the computer from a friend and decided to do a clean install so I deleted the previous partions and made a new one. It went through the whole formatting process fine then went through the windows setup. It then did an automatic reboot but right after POST it gave me an error message. It said Trap followed by 0000005c ==============EXCEPTION=========================== and a series of hexdecimal messages afterworsd. I've done this twice and had the same problem and I just wanted to know if you guys knew anything about this?

Answer:Installing Win XP Pro SP2 on two 250GB HDD

Greetings gfx dude, Welcome to TSF!

Firstly, you only need to install the Operating System one ONE of the HDD's not both of them.
The second HDD can be connected as a "Slave" and can be used to 'save' everything that you download, plus emails and other data, such as music etc.
I suggest that you check the CD for scratches and marks; wipe it very gently from the centre to the edges with a lint free cloth.
To give you the best chance of getting Windows? installed without hassles, such as those you are experiencing, is to completely wipe the HDD with Darik's Boot N Nuke.
Wiping the HDD this way will completely erase everything off the HDD and take it back to a RAW unformatted state, as if it had just come out of the factory.

Just so that you do not forget anything when doing the installation, please read this...

The Windows? XP Installation Check List.

1. The Windows? XP SP2-CD (naturally)

2. Darik's Boot N Nuke (Click the coloured Link).

3. Please read this guide.

4. The Motherboard CD that contains all the necessary Drivers etc.

A couple of tips...
a. Darik's Boot N Nuke will take about 4? hours to completely wipe the Drive; however, this will vary depending on how big the Drive is. (That estimate is for a 80Gb HDD).

b. When you get to Figure 7 in 'The Guide', you can create more than one partition here by simply telling Windows? how big you want it. Should you do decide to create an extra parti... Read more

1 more replies
Relevance 38.13%

hello i have formatted my new Portable HD after 4months but its showing used space 97mb can anyone pls tell me is that normal or is there sum problem ? i mean it should show used space 0 bytes ?

Answer:WD Portable 250GB HD

Is the file NTFS or other i.e. FAT32?

7 more replies
Relevance 38.13%
Question: SIMPLEDRIVE 250GB

I HAVE A SIMPLEDRIVE 250GB MOD # 96300-40001-001 THAT IS NOT WORKING I CAN NOT ACCESS IT ON A DESKTOP OR LAPTOP ANY THOUGHTS?

Answer:SIMPLEDRIVE 250GB

Hi and Welcome to TSF!

Please do not type in all caps. It is considered rude and yelling.

How have you gone about connecting the drive to your PC?

Does Disk Management see the drive?

11 more replies
Relevance 38.13%

Hello, I just ran out of room on my 500GB HDD, Its a 7200 RPM and I like the speed of it. I started looking for a new HDD when I came across an 60GB SSD. I never thought of buying an SSD before. Now I can't decide if I should get the SSD or the HDD ( same price) I need a new drive for linux, but my current drive only has 3GB left. I was going to partition 30GB to linux and keep 30 for Windows. Then transfer my OS to the remaining 30GB, that would free some room. I am a gamer so I need alot of room for games. If I get the 250GB HDD then I would have alot of room for more games and linux. But then I would not be able to boot Windows 7 in seconds. What should I get?

My specs:
Intel core i5 2500K ( stock speed )
MSI - H61M-P20(G3)
8GB of Vengeance DDR3 RAM @ 1333 CAS 7
GTX 550 Ti 1 GB ( Overclocked )
1 500GB 7200 Western Digital Caviar Blue HDD
500W PSU.

Answer:SSD 60GB or HDD 250GB?

Go with an SSD. If you choose the 60GB SSD, you will have just enough space for the OS and a Office Suite and a few other apps before you start to run out of space. If you can afford it, go with a minimum of 128GB SSD as your primary drive, then wipe your 500GB mechanical drive and use as a storage drive.

3 more replies
Relevance 38.13%

Hello,
 
I do not know what happened.. but I lost... 250gb+ of my files in my laptop. On the HDD where was 40gb free space now there is 326gb..
Most of my programs that I had... they just disappear... same with the movies.. (but for example .3gp files still are there)
Moreover, option "restore system" was disabled...
 
Those are logs from the OTL.. I dont know if it will help...
OTL - http://wklej.to/wfa5K
Extras - http://wklej.to/l4yKb
 
I gave this laptop to a computer shop.. but all they did was trying to install antivirus.. then they did that checkdisk when you start the computer... before the login window (it took like 2h or maybe even more)... after that I took the computer back...
Now I dont know what to do, because files can be overwritten, due to the system partition.
And giving this laptop to a professional shop that is specialized in restoring files will cost me SO MUCH.
 
I beg you for help... on the HDD I had very important things
 
Thanks in advance,
 
Greetings,
 
Btw: Sorry for my english.. I hope you can understand everything

Answer:250gb disappear from hdd

Hello, please repost your question with the full OTL log here so we can advance.
 
Virus, Trojan, Spyware, and Malware Removal Logs

1 more replies
Relevance 38.13%
Question: Deskstar 250Gb Hdd

I just bought a new deskstar 250Gb Hdd which I am trying to install in my Compaq Pressario S3190UK

I know its got to be set to slave but I wasnt sure if I should set it up as a
16 head, a 15 head , 32 byte clip or auto spin dissable and all of those choises are available on the drive

I went for 16 heads and booted up

In " my computer " the new drive does not appear ( I still see all my original drives there) yet in System/Hardware /device manager it shows up under drives and on clicking its properties it says this device is working properly

Without seeing it in the " my computer folder " I cant really format or partition it so I then tried partition magic
That saw it fine and reported its size correctly . I told it to create an ntfs partition and use all the drive . It changed color as it should and all that was left was to click on make changes now but when I did that it went straight back to tell me the new drive had no partitions created

I tried various combinations, of primary or logical drive , small or large partitions and fat or ntfs but always it refuses the last step of actually creating the partition .
What am I doing wrong ?

Regards

Don
 

Answer:Deskstar 250Gb Hdd

First I will assume your drive is showing up as the full size in the bios and is corrrectly identified.

If you are using either xp or win2k. Go to disk management; start>run type in diskmgmt.msc and hit enter. See if your drive shows up there; it should be listed as disk1, disk0 will be the master drive. If it shows up there, you need to partition and format the drive. Right click on the drive and choose to create a partition; I like extended partitions for data / storage drives. After you create the partition, right click again and choose to create logical drive. You can make the entire drive one partition or organize it into say 3 logical drives; whatever you want. After you create the logical drive you will need to format them. Again right click on the logical drive and choose format. Use ntfs for your drive. In fact if you use partitions greater than 32 gig, fat32 is not even an option.

Just think about how you want it organized before you start.
 

3 more replies
Relevance 38.13%

I've recently installed a new MSI KT3 Ultra motherboard, and a new 250 gig western digi hard disk. Now, in the bios it recognises that the drive is 250 gigs however when i setup xp it only recognises it upto 130 gig and won't see the full size of the drive.I know 48-bit LBA mode addressing needs to be enabled and as far as I can see it is turned on in the BIOS and as i say, the bios recognises it as 250 gig but windows doesnt and only shows it as 130 gig.Any ideas?

Answer:BIOS Says 250GB HDD... XP says 130?

bump

3 more replies
Relevance 38.13%

I purchased a new samsung eco drive 1tb hdd to add on to my custom built pc. I currently have the 250gb partitioned with xp on it. I installed XP on the new 1tb and when i have both hdd hooked up, XP gets a blue screen of death with the 250GB... if i unhook either one of the drives and run them alone, they run fine.
I updated the bios, chipset drivers, etc...
 

More replies
Relevance 38.13%

My T510 is getting that and i'm not sure if it's enough space or speed.   is $63 dollars worth a 320gb 7200rpm hd?

Answer:Is 250gb 5400rpm hd enough?

whether it is enough depend on how much programs you have and how much you store on the laptop. 

4 more replies
Relevance 38.13%

hi ,everybody i have a dell d600 laptop with a 40 gb harddrive and 2 gb memory . my question is i am trying to install a 250 gb harddrive ,but the laptop doesn't recognise the drive ,so i can't install windows on it . i even bought vista .the laptop won't recognise the drive .help
 

Answer:250GB Hdd Not Recognized

Hi,

What do you mean the laptop won't recognize the 250GB drive? Do you mean in the BIOS? When trying to install Windows? You can try to download a linux LiveCD like Knoppix or Damn Samll Linux and boot from that (F9 or F12 at the Dell BIOS) and see if it sees it. If so, format with QTParted or Fdisk and then try Windows again. Maybe the drive is bad.

Let me know if this helps.

Adrian
 

1 more replies
Relevance 38.13%

Hi My os : Win10 64 BitSSD : 250GB SamsungBefore posting here I searched here for a solution and i only thread that i find is here l Even if i shrink many of the software out there clones entire disk! Tried Macrium Reflect as per a CNET video, it says not possible to clone to my 250 GB ssd and my C drive is only 105GB with some software like AutoCAD etc.Any solution for this ?

More replies
Relevance 38.13%

Hi,
I just bought a maxtor DiamondMax10 250GB HDD...
and i bought an external case so i can use it on my laptop(toshiba A-50)..

I have used a 400GB external Drive on the same laptop before..
I have also used 200GB external drive before on the same laptop..
all of my previous hdd were western digital....

The problem is:
I wanted to format (partition) the hdd... but the computer said that the capacity (unformatted) is around 2 TB
i tried to format it as one partition, it wont do it...
I tried to minimize the capacity to an acceptable (close to real) level (set it to 230Gb) but it wont do it...

I tried to format it using FAT32, and it worked but to a maximum of 200Gb, it is ok... but the problem is that i can only use 10 GB after that the harddrive gives an error (write-protected)...

1- have anyone used Maxtor drives before as externals???
2- Have any one came across this problem before ???
3- Will it work in a normal PC or not?? (just to format it)... because getting a pc in here is quite difficult

Thanks in advance....

NOTE:
I used the windows XP disk managment tool...
and i used also Partition Magic 8.0....
all with the same results...
 

Answer:problem... 250Gb Hdd is seen as 2TB !!

What external are you putting the drive in?
 

3 more replies
Relevance 38.13%
Question: 250gb hd problem

Hitachi 250gb hd, was working fine, everything was ok. It was split into two partitions a 128Gb clip, and a 104 gb clip. The 128gb clip had information on it. Now the drive is recognized in bios properly. When it boots to windows it comes up as 8gb, and has information on it, but I can't access it. One more thing the drive now says fat, when originialy it was ntfs. Under manager, The drive says it is split at 138g and 104 gb. Any ideas? when I run a drive test the drive says it has a bad cable, I swapped the cable out three or four times, to no avail.

I think I have it all listed, oh windows xp home, installed on it's own drive.
 

Answer:250gb hd problem

Has nothing to do with drivers or Spyware, it is more of a Bios issue. What is the manufacturer and model of the computer that this drive is in? Also, do you have SP2 installed for XP?
 

5 more replies
Relevance 37.72%

Hey guys I'm new to these forums so be nice

I just partitioned my 250gb to 100 and 125 one i want to use for back up which i believe i will use my Acronis for.

The other i want to use as a regular hard drive, with windows XP or Vista,

But when i load the XP cd into the computer the XP disk does not see the USB 250gb drive at all (E: and F, how will i got about loading XP onto this drive?
 

Answer:I partioned my WD 250gb into two seperate ones, now what?

You are done.
Windows is installed on C: no?
The partitions on your removable USB drive can be used for more storage,backups.
 

5 more replies
Relevance 37.72%

It has been 3 or 4 hours and... still going.

Drive is a Western Digital 250 (really more like 232) GB, 8MB cache, one touch, external hard drive.

USB2 connection.

Win XP
1.7 GHz Celeron
756MB DDR RAM
 

Answer:how long does it take to format 250GB?

7 more replies
Relevance 37.72%

Hey this is my first post to this site so please feel free to nag more info out of me if i dont put enough onMy XP Pro recently got a 250 gb Seagate internal hard drive installed into it, yet it takes around 10 to 15 minutes for it to boot.So i decided in the end to have it as a secondary hard drive and have my 80 gb hard drive as a primary. yet when my 250 gb reaches over 91.9 gb full, it will not load anymore data, instead crash and say that i have lost all data that i was moving.If anyone knows whats wrong or even advice, it will be well appreciated.Thanks in advance.

Answer:Boot Problem XP PRO 250GB

How is the drive formatted ? ?NTFS/FAT32 ?2 things you can check: First in device manager find the IDE controller and then the drive andd right clik it and select Properties...Report back what mode it is in. If it's PIO mode this will account for the extreme slowness.2nd DLoad and run Seatools diagnostics on that drive to determine if it's healthy or not.The file is used to create a bootable floppy/CD so you can run it even if Windows won't run.Report back with your findings...

3 more replies
Relevance 37.72%

My computer is only showing it has 127.99gb, when its supposed to have 250gb. Anyone seen this problem before?

Answer:HD showing I only have 127.99gb, its really 250gb

read the first sticky on the forum called: 137gb barrier

maybe the same issue as in yours

8 more replies
Relevance 37.72%

My 4gb USB pendrive appears as only 250mb (EDITED NOW )! What can I do? I have tried using the format option on right click...

Answer:My 4gb USB pendrive appears as only 250gb!

Heh, your complainaing about 246 free gig?

Ok I know you mean meg...

Well I would look in the disk manager in the control panel and see what the partitioning on it is. it may be partitioned wrong. You can delete and repartition it to the full 4 gig. then reformat it again.

6 more replies
Relevance 37.72%

Hi I have an Acer T135 -S870 and would like to install a 250 Gb SATA drive but it is not recognised in the Bios or through Linux Mint that is installed at present on my 80Gb drive in the T135-S870 Could you help me please in solving this problem.

Answer:250Gb drive not recognised

Have you tried to connect only the new hdd with the same cable of the old HDD?

2 more replies
Relevance 37.72%

This is just what is says. A fresh win 10 install on a new SSD. Do not explain to me about cloning.

To date I've upgraded the BIOS (UEFI) on a ASUS P67 Performance Gen3 motherboard. I've changed the SATA Mode to AHCI. I can see the drive in the BIOS.

The Windows installer the page where it lists the drive partitions. I only see one drive partio

Drive 0 Partition 1 239.9GB 232.8 GB Primary

I get the error
Windows can't be installed on drive 0 particion 1. (Show Detailes)

The New button is greyed out and when I select next I get

We couldn't create a new partition or locate an existing one. For more information, see the Setup log files.

Thoughts?

Answer:New WIN 10 Install on new SAMSUNG EVO 250GB SSD

Hello hiltonr92 and welcome to the forums. See if this will help Windows 10 - Clean Install

Are you installed in UEFI Mode? If so, when you boot from the USB drive use the entry that says UEFI and the name of your USB. If not in UEFI, boot from the name of your USB without UEFI in front of it. Delete all partitions on the drive until it says unallocated and then click the 'NEW" button. The installer will create all the necessary partitions. I hope that helps.

2 more replies
Relevance 37.72%

Hi,

Just purchased a new Samsung SP2514 250 gig hdd and XP can only see 32239mb.

Tried using samsung's drive overlay to install xp, but gave up + uninstalled it -(the drive overlay).

I booted from the Xp cd + installed but XP only sees 32....gig's.

I have enabled big LBA by using EnableBigLba from www.48bitlba.com to no avail.

From searching through the forums, I see that a BIOS update may be necessary.

Do I also need to update my motherboard + chipset?

If so, are reliable updates available free on the net?

Any step-by-step instructions would be greatly appreciated.

Thx in advance
 

Answer:[b]SAMSUNG SP 2514N 250GB HDD[B]

16 more replies
Relevance 37.72%

Bought a new 250 g hd for my box. I want to install xp pro. I am at the stage where it shows 1 partition at 131 gb

Xp pro disk in cd bay, boot disk in floppy.

Any help would be appreciated
Dave
 

Answer:New 250gb hd 131 showing? Partition Help??

Plain-Jane XP by default will only recognize drives up to 132GB. If you create an SP2 slipstreamed CD using autostreamer, it will recognize the full drive upon install. Or, complete your install, update to SP2 and then use the "diskmgmt.msc" command in the "run" line to format the remaining hard drive as a second partition.

Autostreamer: http://www.majorgeeks.com/download.php?det=4444
 

12 more replies
Relevance 37.72%

I have a 250GB Maxtor Hard Drive that I decided to convert to an external drive when I got my new Dell (bad idea). It worked great for about a month, then one day I get an 'ambulance-like' beeping alarm from the external. I'm relatively certain its telling me the hard drive is dead... most likely from insufficient cooling in the cheap external HD case I bought. But, I dont have any experience with hard drive alarms so i thought I'd ask. Does this alarm mean this drive is dead for good?
 

Answer:Dead 250GB Maxtor HD... I think

I would check your documentation from your ext. drive case and see what the sound meant. You can always plug it into an IDE cable to check it.
 

2 more replies
Relevance 37.72%

I have a 250gb Maxtor Diamondmax10 SATA harddrive. In windows it only reads/writes up toe 233gb, it shows that thats its limit. In everest and every other diagnostic tool (hell even BIOS!) they all say that its 250GB. Any idea how I can get my other 17GB back??

Answer:250gb HD only gets 233gb on Windows!

Upgrading Service Pack might help.

Also goto disk managment and see if theres any unallocated space.

5 more replies
Relevance 37.72%

this summer i built myself a new computer. i was having sum trouble getting windows installed and thought it might be 1 of the HD's so i unhooked it. once i got it going i kind of forgot about the 250GB HD until just recently. i hooked it up and formatted it but it only showed up as a 127GB HD when it's supposed to be 250GB. this is very puzzling because on the post screen it clearly reads that it's a 250GB HD.

can someone please tell me what i hav to do to get it working correctly because i'd really like to move my music off of my dad's comp. btw, my system specs are in the sig

Answer:250GB HD showing up as 127GB!?

What kind of hard drive do you have? I don't see the sig on the screen so if its there i just can't see it. Also what operating system are you running??

9 more replies
Relevance 37.72%

Hi,
Me again

Yesterday you solved my problem with my new 250Gb Hdd by pointing me in the direction of Diskmgmt.msc

I now have a second problem , I bought 2 of the drives , One for my XP machine which now works fine thanks , and the other identical hdd for my wifes Win 2000 setup and its on this machine I have the problem

Using diskmgmt it finds the drive no problem but allthough its a 250Gb drive its saying its only a 128

What should I do ?

Regards

Don
 

Answer:2nd Problem with Deskstar 250Gb Hdd

16 more replies
Relevance 37.72%

Hi,

I was wondering if LANParty UT NF3 250Gb Motherboard is good for gaming or other usage. How reliable is this motherboard ?

Thank you
 

Answer:LANParty UT NF3 250Gb MoBo

http://www.anandtech.com/mb/showdoc.aspx?i=2198
 

1 more replies
Relevance 37.72%

ive had the hdd for about a year now and its been working fine, i only used approx 1/3 of the capacity. But the other day my m8 was installing Windows 7 on his laptop, so he filled my hdd up with all his backup, and their wasnt any more space left, the next day i plugged it in & the white light was flashing, but i could not go inside it, it just appears as a "Local Disk (F)" on My computer, and the same on my m8's, (and if u double click it, then a sign appears stating that (F) is nt accesible because of an I/O error). oh and i recently changed it from FAT to RAW cuz it wouldnt allow me to move more than 2gb at a time, dnt knw if that mite be important, any thoughts cuz i reeli need the data....?
 

More replies
Relevance 37.72%

Hi I have an Acer T135 -S870 and would like to install a 250 Gb SATA drive but it is not recognised in the Bios or through Linux Mint that is installed at present on my 80Gb drive in the T135-S870 Could you help me please in solving this problem.

Answer:250Gb drive not recognised

Have you tried to connect only the new hdd with the same cable of the old HDD?

2 more replies
Relevance 37.72%

I've got 2 250GB HDD's, I know FAT32 won't work on, but I really don't want to use NTFS. I run Windows and Linux, so having 500GB of HDD space that Linux finds hard to handle isn't really my best option.

Is there another file system or way around it that I can run on Linux and Windows without to much trouble?
 

Answer:FAT32 and 250GB HDDs

10 more replies
Relevance 37.72%

Computer info:

HP Vectra
VL420 MT
WinXP Home SP2
LBA on
Intel Pentium 4 CPU 2.00 GHz
HP System board A08
Chipset: Intel i845 Rev: A3
Southbridge: Intel 82801BA (1CH2)
BIOS: American Megatrends, Inc.
Version: JA.01.07US
Graphic Interface Version: AGP version 2.0
Intel(R) 82801BA Bus Master IDE Controller
SD RAM 512 MB
PC133
NTFS
(did I miss anything?)

I appologize in advance for the long read.

This computer came with only a 10GB Seagate drive. It has less than 300MB left of unused memory, so I tried installing a 250GB Maxtor. It is only recognized as 30GB in the BIOS. I don't understand this because I have WinXP SP2 and LBA is enabled in the BIOS -
Not only that, but I have another 300GB Seagate that I want to install as a slave (I had previously installed this one as a slave to the 10GB but had the same problem with only 64GB being recognized.
I don't understand why my BIOS isn't recognizing it at it's full capacity since I have the latest version of BIOS and LBA is indeed enabled (I thought SP2 was supposed to correct this problem).

My hope is that someone out there can walk me through this step by step (from erasing the disk to installation) because I've been working on this thing all day long and nothing I've tried seems to work. The 10GB drive has to go. I want to install the 250GB drive as my master, copy the 10GB drive to it (I have Casper XP 3.0 for this purpose), and then install the 300GB drive ... Read more

Answer:250GB drive is seen only as 30GB

Did the Maxtor not come with a setup disc .....?
When you go to control panel / admin tools / computer management / disc management and right click on the "free" space of that drive what options do you get?
 

21 more replies
Relevance 37.72%

Hi, Does anyone have any experience of this USB External hard drive? I think my Western Digital 'My Book' is going to pack up soon, so need to find a replacement. Yesterday i asked about a Buffalo drive and got some positive responses, but this one looks good too (and tiny in size). Thanks - Tony

Answer:Seagate 250gb FreeAgent Go/2.5

I use a Buffalo drive however, and it's extremely reliable - the only irritation is the incessant humming noise the drive motor makes.

1 more replies
Relevance 37.72%

Hello,

can someone help me - I have recently re-installed XP onto a 250GB hdd but it is only seeing 127gb drive. I have service pk1 and service pk2 installed and the bios on the system is seeing the 250gb drive.

Can someone help me

Thanks in advance

Elaine
 

Answer:Re-installed XP wont see 250gb hdd

6 more replies
Relevance 37.72%

My 30gb harddrive in my computer died a few weeks ago and a scoured the stores for a new hd. I found a Maxtor 250gb hard drive on sale at Fry's for $140. It was a great deal for the space but I have some questions on it's performance. It's P-ATA 133 with an 8mb cache,a seek time of 9.3ms and rotates at 7,200 RPM. I do a lot of multiasking with Everquest and just general gaming so my pagefile is huge and constantly used. I also do some video editing.

My real question is how does it rate for my needs. Should I look at buy another smaller hard drive to use as my main or keep use this as my only hard drive?

I have the hard drive split into two partitions right now and am wondering which partion actually is on the outside of the platters so I can properly put the pagefile in it's place? Thanks in advance.
 

Answer:Some questions about a new 250gb harddrive

I have the drive. Its currently the only drive, and I use a separate partition for the pagefile, but don't see (and didn't expect) a performance improvement. I have a rig with the swapfile on separate drives and it was noticably faster. So I would definately recommend a keeping the old drive - wherever you put the OS, keep the swapfile on the other one.
 

2 more replies
Relevance 37.72%

I have looked all over the internet and cannot find it.

looks like DFI took all the support pages down as well! Any help would be greatly appreciated!!!!
 

Answer:Need manual for LANParty UT NF3 250GB

Found it yet?

Hey there,

Just wondering if you found the manual yet?
I am looking everywhere to try and find one but no luck yet...

Cheers
 

9 more replies
Relevance 37.72%

I am new to this forum and desperate to find a solution to my problem. My colleague told me of this service and here I am.I had a Windows98 PC with an external Maxtor 250GB firewire connected to it. I took the main HD out (the one with the w98) and installed new one and installed a newly purchased copy of XP. At this point I've connected my Maxtor without installing the driver thinking that XP would recognise it, but nothing happened. I installed the driver but nothing? it can be seen in the disk management as disk 1 and that's all; the next step would be a format, which I refuse to do it.I reinstalled my old drive (w98) back into the case, win98 started as normal, I connected the Maxtor and to my big surprise this drive is not being recognised anymore; even when the PC configuration is exactly what it used to be. I only can see the Maxtor through fdisk but not anymore as a 250GB FAT32, apparently now is a 40GB FAT !?!?!!.Please help me. I have far too much data on this drive including pictures going back 4 years and documents. This drive is a back up of my previous PCs. I cannot afford to lose this data.ThanksAndy

Answer:Cannot see Maxtor 250GB Firewire W98 pc --> XP pc

The data's probably there, just need to connect OK. I had trouble with my Maxtor OneTouch when I connected it without the Maxtor drivers installed, even on WinXP. Suggest you install Maxtor drivers properly before connecting. If that doesn't work take the drive to another WinXP comp, but install the drivers first!

10 more replies
Relevance 37.72%

I run win 98se with 2 drives, a 30gb and an 80gb, both work well, but are full. I bought a 250Gb drive to use as a USB external. To try and format the new drive, I replaced the 80 (D Drive) but the new one is only seen as a 65 GB drive. I've tried fdisk and format, Still 65Gb. Anybody any ideas? as always, thanks in advance for any helpCheers

Answer:250Gb drive and win98se

also, if I want to swop it between 2 machines, one win98se, the other XP, will it need to be fat32?

10 more replies
Relevance 37.72%

Just received and installed Maxtor 250GB HDD.I have a Maxtor 120GB as master drive, partitioned as C,D drive, all OK.Slave drive is the 250GB HDD. Been into Disk Manager and it shows as a 131GB partitioned drive.Been in Bios and it shows as 250GB. Where's the rest gone

Answer:XP will only recognise 250GB HDD as 131GB

click here

6 more replies
Relevance 37.72%

Would there be any conflict with this unit and W7.

I looked at this unit and it appears to me that it would be ideal for my laptop. I need about 120gb for backup of my C & D drives. I'm not sure if this unit is the best and find no place to compare it to other comparable products on the market.

If anyone has used this product I would ask your opinion of its performance and one other question. How long does it take for the first download of all files.

Thanks

Answer:Seagate Replica 250gb with W7

If your only use is for disaster recovery, then this drive will do the job...That being said, I would recommend the purchase a large external drive that can also be used for storing individual files/folders...

1 more replies
Relevance 37.72%

Hi to allI have just installed Maxtor 250GB HD into my P4 PC. Cmos bios reports the HD as 250GB during POST and Win XP C: drive properties reports that capacity is 250GB and used space is 134GB!!The only thing on the drive is the OS (winXP) it was brand new I partitioned/ formatted it using my XP cd. If I look at the properties individually on C: drive (windows, program files, docs and settings, etc) they add up to approx 1.5GB but C: properties is 134GB?any suggestions as to why XP is reporting the use incorrectly and a possible fix much appreciated.TIA

Answer:250GB HD showing too big used space

I recently installed a pair of 160gb drives and found on the Maxtor site that in order for the true capacity to be recognised by Windows you need 2 things[otherwise it only recognises up to 137gb];1 - to be running Windows SP12 - to run the Maxtor Big Drive Tool[available from Maxtor support website]

1 more replies
Relevance 37.72%

Hey. I got a 250 gb western digital HD (WDC WD2500JB-00REA0) this started about a week ago, i keep hearing the drive stop like being cut from power and then powering up again,i had my computer on for a couple of weeks before this started could this anyhow affected it. I also tested it with SpeedFan S.M.A.R.T function and it gave me this warning - "NOTE : your hard disk Power On Hours Count attribute current value (96) is below the normal range (97 - 100) reported for your specific hard disk model. Basically your hard disk was powered on for more than the maximum time the average user did. This means that either all of the reports collected are from hard disks that were not powered on for too long (this is realistic for recent models) or that your hard disk is becoming old. Usually this is not considered as a pre-failure advisory, but you should check whether you want to replace the hardware or keep an eye on its performances over time."
Thanks.
 

More replies
Relevance 37.72%

I have a 250GB which seems to have failed entirely now. It's still detectable by Windows - is there any way I can recover the files? They're really important to me. I don't care what it cost to recover them, but of course cheaper the better
 

Answer:250GB Seagate HD failed

Contacy seagate. They should be able to help you.
 

11 more replies
Relevance 37.72%

Hi,

1st off sorry if this has be told before,

I have a 250gb external hdd which now only show 100mb.

It was an old hdd out of an old 7 laptop (which got accidently dropped and insurance replaced) I asked for the hdd back, which when I got it back was fine and working well, I did a quick format and not used it for over a year,

come to use it now to store movies and pictures on and it say volume 100mb?

How do I get the rest back?
Cheers

Answer:250gb hdd showing only 100mb

Can you see it in Disk Management? (right click on My Computer and select Manage, then go to Storage > Disk Management). Disk Management (What It Is and How To Use It)
Is it showing the drive? Does it show the total disk size?

8 more replies
Relevance 37.72%

Hi. I need advice on setting up  a M.2 SSDriveMy Laptop is a ENVY X360 Convertible  Model: m6-w105dxI installed a Samsung EVO M.2 250GB but I really can't make it work.It is  neither recognised by bios nor by OS (windows) or any disk management software (samsung magician or intel rapid storage technology, so I have no clues how to solve this.Samsung 850 EVO M.2 seems to be right choise cosidering my laptop specificationsI contacted HP support and they  told me:  maybe is a loose contact between ssd conector and mainboard slot , I've double cheked that and all seems OK. in place and securedThen they told me to disable secure boot and enable legacy boot option @ bios configuration.... no results after that... SSD keeps unseen by my laptop bios and OS...Any expert advice or any success M.2 SSD installation experience would be really nice and appreciated...I've asked on other threads in this forum with no luck..thank in advance for any help on this.RegardsAle

More replies
Relevance 37.72%

Hey guys.
I setup my system on a 250gb hard drive but system reads it as a 127gb. I downloaded the software for converging it to its original form yet it won't let me as it is the C:// drive. If anyone can point me in a direction that might be able to assist, that would be awesome (i.e. a possible partition of the space that wasn't originally read?) THANK YOU!
 

Answer:Op sys is on 250gb, reads as 127gb

Do you have Windows XP Service Pack 2? That is the usual cause for this problem.
If you do not, you mayl not be able to partition the drive to anything larger than 132 GB... 127 or so after formatting the partition.
It becomes a catch 22. You could partition and format the hard drive to the 250 GB figure, if you had Windows XP Service Pack 2 to do the setup of the NTFS partition. It will work once as the full 250, or so, once it has Windows on it, but getting Windows on it prevents that.
There are solutions online you should be able to find with a Google search, but they require jumping through a few hoops.
One solution is to setup the hard drive as a slave in a computer that has Service Pack 2... or setup the drive with two partitions while slaved in another computer.
Alternately, set it up as 127 GB, then upgrade Windows with the Service Pack 2 disk you buy from Microsoft for $3.40, then use partition magic or Acronis to enlarge the partition.
 

12 more replies
Relevance 37.72%

Hi folks,will my laptop work properly with this ssd? Does anyone have it installed in his thinkpad and can say more about it? Or maybe you recommend another drive thanks for your help

Answer:l540 + 250GB Samsung 840 Evo

Hi Phill7,
 
Welcome to Lenovo Community!
 
As per you are query we understood that you are looking for SSD drive compatibility for on ThinkPad L540.
 
As per the Lenovo technical specification ThinkPad L540 will support 250Gb SSD drive, please click here for complete details on the specification.
 
The SSD should be 2.5-inch.
 
Hope this helps!
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 37.72%

I tried to ghost my 60G disk onto 250G on a different computer and it finished OK. But when connecting the new drive (250G) to my T60 it would not boot. Booting from Windows CD showed that all directories were ghosted correctly.What could be the problem?













Solved!

Go to Solution.

Answer:T60 changing disk to 250GB

don't use Ghost use Acronis TrueImage. 

8 more replies
Relevance 37.72%

Hi guysI have recently purchased a crucial 250gb ssd and i want to clone my Lenovo y510p 1Tb HDD. The HDD has 7 partitions. A 1000mb recovery partition, a 350mb recovery partition and another 13.2Gb recovery partition, a 260mb EFI system partition, 100mb oem partition, Windows 8 OS partition , and a Lenovo(D) partition. I'd like to only clone the OS but to do so which partitions are needed to boot into Windows and do I need all the partitions(I really don't want all 3 recovery partitions) and why are there 3 recovery partitions?Thanks
 
 
 
Mod's Edit: System model added to Subject line to improve visibility / clarity

More replies
Relevance 37.72%

This is just what is says. A fresh win 10 install on a new SSD. Do not explain to me about cloning.

To date I've upgraded the BIOS (UEFI) on a ASUS P67 Performance Gen3 motherboard. I've changed the SATA Mode to AHCI. I can see the drive in the BIOS.

The Windows installer the page where it lists the drive partitions. I only see one drive partio

Drive 0 Partition 1 239.9GB 232.8 GB Primary

I get the error
Windows can't be installed on drive 0 particion 1. (Show Detailes)

The New button is greyed out and when I select next I get

We couldn't create a new partition or locate an existing one. For more information, see the Setup log files.

Thoughts?

Answer:New WIN 10 Install on new SAMSUNG EVO 250GB SSD

Hello hiltonr92 and welcome to the forums. See if this will help https://www.tenforums.com/tutorials/1...n-install.html

Are you installed in UEFI Mode? If so, when you boot from the USB drive use the entry that says UEFI and the name of your USB. If not in UEFI, boot from the name of your USB without UEFI in front of it. Delete all partitions on the drive until it says unallocated and then click the 'NEW" button. The installer will create all the necessary partitions. I hope that helps.

6 more replies
Relevance 37.72%

Hi,
Bought a new Western Digital Sata HDD which I got today.
New in anti static bag and labelled WD2500AABS, says on it 250gb.
When I put it in my PC it shows as 40gb.
Thinking this may be an error I booted from Win XP CD to load OS and
it said 38.xx gb.
I have contacted the seller by Email but thought I may get faster and more reliable info from here.
I can of course return it but do not want to if it is me doing something wrong.
Ray

Answer:New 250gb Hdd Shows as 40gb

That model definitely shows as a 250GB see here
What version of XP? if you do not have SP3 you may not have support for large drives.
In Windows, click on Start->Run, enter "regedit".
Navigate to the HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\atapi\Parameters registry subkey.
From the Edit menu, select New, DWORD Value.
Enter the name EnableBigLba, then press Enter.
Double-click the new value, set it to 1, then click OK.
Close the registry editor.
Restart the machine for the change to take effect.

10 more replies
Relevance 37.72%

Hi, I have Lenovo S500 and after I install the OS, the partition OEM Reserved is hidden in Windows and I want to use this because it's to large(it's not a few GB... it's almost 250GB, and i think that it's too much).I want to know why is created this partition? What's his function? Sorry for my bad english. Thanks!

Answer:Lenovo OEM Reserved 250GB

Hi Rxgamer,
 
Welcome to Lenovo Community!
 
I understand your concern, but let me inform you these partitions contain recovery image and Drivers/Default Applications. By deleting the OEM (Original Equipment Manufacturer) partition the system will loose its ability to "Factory Reset/ OKR (One Key Recovery)" of the system.
 
Do post us back for further queries.
 
Best Regards
Shiva Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 37.31%

Hello guys.. newbie here.. just want to seek help regarding HARD Drive replacement , for some reason my laptop wont boot upit only does lights (LED) but will not continue to boot or show the logo/ BIOS so we suspected probably HArdisk problem - in that sense we decided just to BUY a new hard drive and replace the existing 160GB with a 250GB.. Now im not sure if this is compatible enough with the MoBO..and the bios..MODEL : LENOVO 3000 G430 just bought it 4months ago here in Hong Kong.. Advice & tips is appreciated. http://www.vatgia.com/pictures_fullsize/tut1254386189.jpg

Answer:is it ok to put a 250GB Hard drive replacement?

You probably can't update the bios in the machine's current condition and if it's only 4 months old that's probaly unwarranted.Check the size to make sure it slot 1, 2 or 3 ( Different thickness) and bring the old HD with you to the store.Also check to see if the HD is IDE, SATA or PATA. It should say on the HD. If not then check out the spec sheets for your machine. Didn't save them? Try doing a search on here. Good luck with that though, I've seen rubber duckies drown with the level of support that Lenovo offers.Ensure that you have the recovery disks or make them any way you can.Good luck to ya bro.

1 more replies
Relevance 37.31%

I have a Maxtor 250GB Harddrive. I just got it like two months ago. Installed it and it was working fine. I had to get the windows large disk support, use the Maxtor utilities to format it right. Then I had a problem, non HD related, and I reinstalled windows. Now, Windows says theres only 72.6 GB of free space, and that 161GB is used. Since i just got it and have hardly done anything, theres no way it could have filled up. Besides, when I go into it and check the size of everything, right clicking, seeing space etc, theres only approximately 53.6GB used. Why is it freaking out and saying there is only 72GB left?
I have Windows XP Pro, with SP2. I have the large disk support thing, and I tried fixing it with Partition Magic, but it said that the other space was used, when its not. I tried Defragging, Scandisk, with surface scan, and I cant figure out what to do.
 

Answer:Freespace Messed with 250GB HD WinXp

I think that when you reinstalled windows, you just formatted the drive, with default option which was 126gb.

If partition magic cant fix it then you will need to reinstall windows again...
 

3 more replies
Relevance 37.31%

Hi guys,

I was going to do clean install Windows 10 but there was an issue of GPT so I decided to convert into MBR. I didnt selected the volume by mistake and clean the whole disk.

Before there was 2 partitions

C: 150GB
D: 88GB

Now there is only 1 partition

C: 238GB

I have very important data on D drive and I am very confused right now.

Moreover, its still GPT and I also checked on Lupu Linux maybe if its on RAW but its not connecting through usb case.

Regards.

More replies
Relevance 37.31%

I running 32bit amd 3000+on an asrock k8 mb with 1gb ram, however we wanted to mount two maxtor 250gb hd. in the bios the mb id's the drives but when uploading winxp pro only 131gb is seen. Will drive mounting software or a promise card be required???
 

Answer:Solved: Mounting 250gb harddrive

Do you have an xp disk with sp1? If your xp disk is an original xp [without sp1] you will need to either slipstream sp1 to see the full size on install or install with your disk and update to sp1 or sp2. After the update, you will see the rest of the drive as unallocated in disk management. You can create another partition in the unallocated space or use a third party app like partition magic to expand your existing partition into the unallocated space.

BTW if the mb ids the drives correctly with the correct size, you should not need a controller card.
 

3 more replies
Relevance 37.31%

I'm looking for a motherboard around or less than $90. My choices are the Abit NF8 and the DFI LanParty UT nForce3... The DFI is older, but costs more and seems to be very favorable. The Abit NF8 is cheaper, but newer, and seems to outperform the DFI just a tiny bit according to the reviews. Both have what I want: onboard everything (LAN, FireWire, USB, sound) Which one do you recommend? Thanks.
 

Answer:Best AMD socket 754, nForce3 250gb mobo?

I would go with the Abit board, great boards-lots of o/c features
 

1 more replies
Relevance 37.31%

I can't seem to find an answer to this simple question and I found conflicting pieces of information on the official Lenovo product pages.  Any help would be highly appreciated The question is: Can I install the 250GB FDE 7200rpm SATA HD (Lenono Thinkpad's part number 43N3410) on my X60s, Win XP (SP3), model 1704-5LG, which is still running on the original 80GB 5400rpm HD? Thanks in advance!   

Answer:Can 250GB FDE 7200 be installed on my X60s?

Welcome to the forum! You can install any 9.5mm (2.5") SATA laptop drive in your X60s and it will work just fine, and that includes the HD you're interested in. Hope this helps.

4 more replies
Relevance 37.31%

Hello everyoneI am seriously debating between two NVME drivesOn my HP 240Z system.1: SAMSUNG '' 960-EVO 250GB ''2: SAMSUNG '' 950-PRO 256GB ''In mey contry israel the price are Pretty similar:The '' 960-EVO 250GB '' is   298 $And the '' 950-PRO 256GB ''232 $ well is not similar exactlyIn terms of performance i Believe the are the same the '' 960-EVO'' win in a bitBut i'm thinking on the Futureproof you know,Let's say if you play in five years from now how the two drives will performBecause the '950-PRO' is 1 bit for sell '' SLC '' and 5 Year or 200TBW!And the '' 960-EVO '' is 2 bit for sell '' TLC '' and 3 Years or 100 TBW?I would be happy for any suggestionMany thanks

More replies
Relevance 37.31%

This may be a total noob question, but honestly I didn't have any idea what I should search for to find out if this is a known problem. Here it is:

Just put my new system together and in the BIOS it recognizes the drive for what it is, 250GB, but when I went to install XP, it saw it as 130GB. Is there a known reason for this or am I stuck using half of my drive? It's an SATA drive, does this have anything to do with it?

system specs:

Athlon 64 X2 3800+
Asus A8n-e
XFX 7800GT
2GB Corsair valueselect
250GB SATA2 WD HDD
 

Answer:XP only sees 130GB of 250GB drive

You need to see about slipstreaming a copy of Service pack 2 into your install CD. That might be a service pack 2 thing.
 

15 more replies
Relevance 37.31%

Hi all,

I would like to do the upgrade of my Hard Disk (40GB now). What is the maximum HD capacity which my Toshiba supports? Can I put even 250GB?

Another question is, can I buy for example external USB 2,5'' Hard Disk and swap the disk from my laptop with it, I mean put this one from USB case inside my Toshiba and original one from Toshiba to USB case?

Will it works?

Answer:Equium A110-233: Want to upgrade HDD - Can I use 250GB HDD?

Hi,

First thing to do is found out work model of hard drive you have,
in the past i have swaped hdd's around but as i say above, what model?..

Here are some for a Toshiba, but you can use a 3rd party.. i.e Samsung, Western Digital etc..

http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/individualOptions.do?service=UK&OPTION_ID=120291&t oshibaShop=reseller&selCategory=4699

And options for your laptop

http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&DISC_MODEL=0 &highlightOption=5420&PRODUCT_ID=118286&tab=1#1

Im not sure on the hard drive, but i wouldnt put anythink bigger than a 120, maybe a 250..

2 more replies
Relevance 37.31%

Hi

I own a Equium A100-147 with 60Gb HDD. I have a recovery disc and have restored the laptop many times.

I am considering an HDD upgrade to 250GB.

Couple of questions on this...

Will the motherboard accomodate a 250Gb drive??

If i replace the HDD will the recover CD install a fresh copy of te fatory software (inc windows xp MCE)??

Any advice would be gratefully received.

Answer:Equium A100-147 HDD replacement to 250GB possible?

Yes, you can use a 250GB. The notebook has a SATA interface and there is no capacity limit like on IDE.

If you use the recovery CD, you will get the factory settings. This means an XP installation with all drivers and tools.

5 more replies
Relevance 37.31%

Hi guys,

I have seen a WD Scorpio 2.5" 250GB EIDE drive. Can I replace this for the 60GB drive fitted at present?
First, is it possible.
Second is there a limit if any to the size I can fit?
If it is possible, is there anything I will need to do other than just swop it out?

Regards,

David

Answer:Satellite P30-145 can I upgrade HDD from 60GB to 250GB?

In my opinion you cannot do this due to the huge HDD size!
But this is only my personal opinion. The problem is that Toshiba doesn?t provide any information regarding the max possible HDD size.

What you can do is to running some tests and to check it such immense HDD size would be supported.
But I?m sceptical.

1 more replies
Relevance 37.31%

Hi, I just installed 250GB Hard disk on my PC running Win2K (has SP4). I am able to see the capacity as 233GB in Windows explorer but when I enter the setup program while booting the machine it says the capacity of Disk01 is 6GB. Wonder why and is there a way to verify the 233GB capacity which the windows explorer shows ???

I really appreciate your help

Thank You
 

Answer:Testing 250GB capacity in Win 2000

Im a bit confused here? When you go My Computer, C: and properties. How much space does it say you have. In total.
 

2 more replies
Relevance 37.31%

I replaced a Kingston 128GB SSD with a Samsung EVO 250GB SSD. Cloned Kingston SSD to new Samsung SSD using Acronis True Image.

Now, when I boot, it sits there for 30 seconds flashing the hard drive light blinking then proceeds to boot normally. All BIOS settings are default.

Hardware details in Specs.

Booting from the 128GB SSD was fine, no obvious delays.

Any idea what might be causing this? Could the new SSD be defective?

Answer:30 second boot delay with new 250GB Samsung SSD

Hey Rich,

Since it's for 30 seconds, it sounds like the time it waits before the default OS runs automatically. You might check to see if that may be it.

Startup Options - Change Time to Wait before Default OS Runs

15 more replies
Relevance 37.31%

Hello and thank you in advance for your help!

I bought a new Samsung 850 EVO 250GB for my old aging computer and this happened:

1. Cloned my old c: drive to the ssd, replaced it and everything went fine for a while until i started getting an infinite loop.
Windows wouldn't boot. Did a registry recovery via command line but my windows installation went to hell to forcing me to reinstall.

2. From this point everything went to hell, and after multiple windows reinstalls here's some of what happens:
- Windows installs but errors immediately follows;
- Some windows updates install but eventually start failing until windows update fails completely;
- Windows installs, updates install but eventually windows fails to load and enters repair mode claiming startup errors;
- Programs stop working for no apparent reason, some examples: Browsers won't run, file associations disappear (class registration errors), explorer;
- Driver problems with peripherals,
- File system corruption errors;
- I got situations where the computer would get stuck in a reboot/system restore/repair loop
- Automatic and manual restore points disappear making it impossible to restore to an earlier time;
- Changing the sata mode to IDE instead of AHCI seems to solve some of these issues but eventually the system locks up, the hdd light stays on, and after a reset the ssd doesn?t get recognized at startup. I have to power off to get it back but it?s the same all over again.

... Read more

Answer:Samsung 850 EVO 250GB, serious migration problems.

Have you attempted a clean install on the ssd yet, mine works just fine

5 more replies
Relevance 37.31%

Hello, We have a customer who has an R40 that we replaced the drive with at their request for more drive space. The biggest drive we could go with was a 250GB drive. Since we installed the drive, the R40 has found it way back to the shop a couple times for a bad hard drive. We use only NEW drives. The drives have been WD 250 ide notebook drives. The original drive was a 40GB in size. In talking with a colleague form another shop, he suggested that the power supply and battery could play some role in this problem. The laptop battery does not hold a charge. The OS is XP Pro with SP2, the computer does see the entire 250GB when installed, this is seen in My Computer and in the BIOS. Can anyone give a suggestion as to what might be causing the larger drives to not last in the R40. The R40 isa Type 2723-LU2. I would appreciate any advice in troubleshooting this. It could be time for her to move to a new laptop. Thanks, Peter

Answer:R40 on it's third 250GB hard drive in four months

well i don't think the R40 has the shock protection system that came in the later T and R series. This means if the laptop experience constant shocks of some magnitude, this may cause faults to develop in the larger hdd, as the fault tolerance level of these new drives are slightly less than the smaller capacity drives. Usually bad sectors or other mechanical faults may develop, if the the drive head routinely crashes into the platter.   

3 more replies
Relevance 37.31%

I have a 250GB external mini toshiba HDD bus powered and need a device driver to connect to my computer which is running on win98se platform.

Can any one HELP?
 

Answer:External 250gb usb hdd, win98 drivers

You can try installing the chipset software for your motherboard, but that may not work. If you can provide the exact model of the hard drive and the make/model of your motherboard, we may be able to help. Win98SE has very limited native USB support and there may not be any way to get the drive to work. If there's any way you can update your OS to something even slightly newer, like WinME even, the support for the drive would be built-in....
 

4 more replies
Relevance 37.31%

I use W7 Home Premium and would like to make a backup of my entire system. I will use the image method and the combination of my C and D discs are about 125GB total. It appears to me that this Seagate will do the job, however, I would like some opinions before I purchase it. Thanks

Answer:Seagate 250GB USB External Drive

You can get a 1TB external hd for $75. Why limit yourself. You can store an image of your hd, as well as back it up. Will the 250GB be ok? Yes. But go ahead and get the larger drive.
**GO 82nd - All the way! **

3 more replies
Relevance 37.31%

Hi, I'm new to the DIY PC World and urgently need some help.
My hard disc is a Samsung 250Gb disc and it is recognised in the BIOS. As soon as I attempt to install Windows XP, when formatting, it only recognises 127Gb. I installed it anyway and ran some Windows updates from the MS site, thinking this might fix the problem. It didn't. I also accessed the Disc Management window (saw this advice in one of your threads) to no avail: it says that this device is working properly, although only showing 127Gb. If this is important, my CPU is an Adlon 64 Venice 3000+.
I'm grateful for any advice any of you might have.... !!!
Katrin
 

Answer:Need Help!! 250Gb Harddisc in BIOS, but only 125Gb in MS XP

11 more replies
Relevance 37.31%

I added a Samsung EVO 250GB SSD. Cloned previous boot drive which was a 128GB SSD to it using Acronis True Image. Now, when I boot, it sits there for 30 seconds flashing the hard drive light then proceeds to boot normally. All BIOS settings are default. Lenovo IdeaCenter K450Intel 4th Gen i7, 16GB of ram Bootign from the 128GB SSD was fine, no obvious delays. Any idea what might be causing this?













Solved!

Go to Solution.

Answer:30 second delay since adding Samsung 250GB SSD

Hi Ztruker,thanks for psoting. Try uninstalling the the Intel Rapid Start software and let me know of the diffrence you see.REgards

5 more replies
Relevance 37.31%

I am new to this forum and have a question.

I have a new computer with Windows 7 home basic on it and all works well. Except the external harddrive of Iomega 250GB USB 2.0. The computer doesn?t see the drive. On this drive is are the backups of files that I want to install on this new computer.
How can I solve this problem? I googled for drivers but cannot find anything.

Answer:Iomega 250GB USB 2.0 Hard Drive

it shows nothing at all in computer? what if you unplug the usb then plug it back in again while windows is running? does anything happen?

and please fill in your system specs it may help if someone else sees this thread

5 more replies
Relevance 37.31%

Hey guys (and ladies).

Although there are many forums with this topic laid out, I have tried everything by the book and have no luck. Here's the problem:

I have a 4 drive setup:
-60Gb SSD (Windows 7 Ult x64 + some programs) (c)
-30Gb SSD (i)
-1Tb HDD (h)
-250Gb HDD (empty reserved for Win) (f)

As the 60Gb SSD drive is full I want to migrate the whole drive to the empty 250Gb HDD. Of course, no need to say that I want everything to run afterwards without any re-installs (also the files on i and h)

I have tried many clone softwares (Paragon, EaseUS ToDo etc) and the clone goes ok, but it wont boot from the destination drive. Luckily enough I still have the original c drive otherwise I would be stuck!
I also looked at the Windows backup and restore, but by default it want to clone all my drives and I cant deselect them (over a Tb of a backup??)

Now what can I do to get this sorted? I just want contents of the 60Gb SSD (with Win7) on the empty 250Gb HDD.
Any ideas of a program that DOES work?
Also, when cloned, the new drive is not 'c' anymore.
How would all programs/files work?
Or is the idea that you delete the original drive and then rename the copy to 'c'?

I probably do something wrong, but a clean install would take days (as webdesigner I use loads of software and not looking forward to reinstall all those)

Thanks a ton for a possible solution!!

Answer:Clone 60Gb SSD to 250Gb HDD - not working so far

Did you check the boot order or sequence on bios after the clone process? And second, you need to clone from outside windows using the bootable version of Paragon, EaseUS, Acronis, etc.

3 more replies
Relevance 37.31%

Hi,

I have sony vaio VGN-NW15G with 250GB HDD Vista Home premium 32bit
Recently my HDD crashed to respond so I bought new 750GB HDD.
Once I replaced with new One I try to run Recovery disk to install everything but I am fail to install error:333.
I have no Idea how can i install vista again.

If any one can help I appriciate for help.

Chetan

Answer:How to install Everything in new upgraded 750gb hdd from 250gb

The recovery discs that come with preloaded systems usually require the HD currently in the machine to be exactly the same as the one that was in the unit when sold. I would contact the maker or check their online support. Perhaps you can get a discounted upgrade to Windows 7. Or you may be able to install Windows 7 for evaluation purposes using an install image. You may want to check out Windows 7 Help Forums for guidance. The evaluation period is plenty of time to determine everything works.

6 more replies
Relevance 37.31%

I am trying to decide what type of HD to put in my computer...a 250GB SATA or a 320GB RAID 0 (2 x 160GB SATA HDDs)...and would really appreciate hearing your thoughts.

I will be using it mostly for everything from statistical analysis, writing, etc. to music, pictures, DVDs and flight simulator work. The bottom line is data preservation is important. I have lately been hearing that RAID 0 does not provide any real performance improvements and carries more risk of data loss. I have also been told by the folks at Symantec and Norton that some programs such as Go Back will not work on RAID disks.

If what I have been told is true, RAID 0 carries little in the way of performance improvements, but an increase in data loss risk and more limiting in some program availability making the 250GB SATA sound more appealing.

Could you please tell me if this is true...what are your experiences/thoughts?

Thank you very much!
 

Answer:320GB RAID 0 VS 250GB SATA...please help!...

9 more replies
Relevance 37.31%

i need to format HDD to fat32 for a movie player standalone....win7 is formatting to some funny format and making my hdd drive click in the player.

what do i do to format to fat32 and what cluster size , ty

Answer:Format to Fat32 for 250Gb in windows 7

Hi ollie007

Welcome to SevenForums
Are you having issues converting media (video) to a standalone player (format) or do you want to convert the data (video) to fat32 format?

Regards

6 more replies
Relevance 37.31%

Hi beautiful people,

Currently im using a 60gb partition for windows 7 32 bits ultimate in a SATA HD (AIHC mode), i've been told in the past that it is not recommended to use the entire HD as one partition cause slows the system (the needle works more), is that still true?

Answer:Windows 7 in a 250GB Hard Drive

To a certain extent yes, It is better to have one partition in the top of your drive to hold your system files (programs, drivers, etc) and another partition to hold your data. This will help your system run faster.

However, you cannot just rely on this alone. You should do regular disk cleanup using a program like CCleaner (don't use the registry cleaner option) and defragment your hard drive regularly as well.

9 more replies
Relevance 37.31%

Does anyone have external speakers for a tablet?

I'm looking for speakers that will give high quality sound with my Archos 70 IT 250GB. I don't need speakers that will blast really loud, but I do want good quality sound with some volume.

I'd like to have speakers that I can carry with me in my backpack, that will somehow close safely, so as not to ruin the speakers.
 

More replies
Relevance 37.31%

Am looking at buying an external hard drive to use as a secondary back up device for my music collection etc, while still regularly backing up my important documents on DVDs. I've been looking around and I like the price of the Western Digital My Book 250GB Essential USB 2.0 External Hard Drive (55 from amazon.co.uk). It's got pretty good reviews and WD is a big name with a decent reputation.

Am only looking to spend around 60 and am not looking for anything massive. Anyone have any thoughts or suggestions? Am looking to order the external HDD this weekend.

Thanks!
 

Answer:Western Digital My Book 250GB

There's nothing wrong with your current choice.
 

1 more replies
Relevance 37.31%

how can I create a 250gb data partition on my hard drive Move my files to it and then wipe the Windows partitions and then reinstall windows so that I don't lose my files.

More replies