Computer Support Forum

Using Clipper dBase under Windows - help....

Question: Using Clipper dBase under Windows - help....

I maintain some legacy programs written under dBase and compiled with Clipper.I have a couple of problems when running under some versions of Windows ? especially XPNormally the key-code for the left arrow key is identical to Ctrl-S> - both, when tested with a utitlity, are correctly shown as being ASC 19However, when running in a virtual DOS environment, while the left-arrow key works fine, the Ctrl-S> is ignored. I assume that Windows is intercepting the code for some other purpose.Using the Properties of the desktop shortcut to the DOS environment, I have tried various combinations of Compatibility (for Windows) and disabling the Windows Shortcut keys, but no still solution is found.Secondly: the programs frequently use the higher ASCII codes to build boxes on-screen. These generally work fine, but on occasion ? and I can find no reason for why this only happens sometimes ? the characters get mis-interpreted and produce other graphics characters.Would be grateful if anyone knows a solution ? especially to the key-code issue - or even just a pointer to someone who might know.Many thanksDr Philip Ramage

More replies
Relevance 100%
Preferred Solution: Using Clipper dBase under Windows - help....

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 93.48%

Am I the only one still having to modify and keep running mid '80's software, yes, prior to windoze. The s/w is run daily in a very large corporate in a win2000 environment.

Does anyone have any info on what I could use to help transfer the code to something more modern? Of course, the user interface would have to be rewritten.

Yep, I'm very old too.
 

Answer:dBase III+ and Clipper

11 more replies
Relevance 89.38%

I want to ask about porting / converting ancient (20 years old!) dBase / Clipper source code and files to Modern Windows XP environment.

Should I use Codebase and re-compile the program for Microsoft C?

http://www.codebase.com/products/

Is there any other better / simpler ways to port text only applications?

Thank you.
 

Answer:Porting dBase/Clipper Source Code And Files

Are you asking if there's any way of automatically converting the source code or you asking whether you you should rewrite the application. Codebase will not convert an XBase DOS program to a windows program. From what I understand Codebase is a library that allows you to manipulate XBase databases (DBase, Clipper, Paradox etc) with a windows language such as Visual Basic.
 

1 more replies
Relevance 56.99%

does anyone know what happen to that "old" programming language, called clipper, like the old dbase language? what is clipper called today or computer programming language is the most similar to clipper?
 

Answer:ca-clipper 5.3b for dos/windows

OMG! My first job in the computer field! I was the install guy for a point of sale/accounting software for specialty gift shops, which was written in Clipper for DOS. Had to setup that program on point of sale computers for the front, and in the workstations in the office for the accounting part. They kept using the DOS version til past Win98 days, when I left that company. When I first got there they were using Artisoft LANtastic for the networking, on coax.

Pig of a DOS program, had to learn the art of fine tuning config.sys to get conventional memory up past 600.

The owners of the software company used to raise pit bulls...one of them came to the office every day, sorta the mascot of the office. His name was Clipper.

Anyways, I'm not a programmer, I'm a networking guy, but from what I remember in the days before I left that company, the programmers there were having a hard time migrating their program to a native Windows backend.

I believe Clipper for DOS remained for DOS
http://en.wikipedia.org/wiki/Clipper_(programming_language)
and one of the projects designed to migrate it to Windows almost made it..
http://en.wikipedia.org/wiki/Visual_Objects
 

7 more replies
Relevance 55.35%

Has anyone here been able to run dbase III under Windows 7?

I want to continue using this program and am now dual booting to an XP setup in order to do it.

I was not able to get it to run in the Windows 7 virtual machine set up with XP.

Any suggestions or is this an impossible task?
 

Answer:dBase III under Windows 7?

I got it running under the virtual machine in Windows 7 and in Windows 98 compatibility mode. There is a problem now that I have not solved so far but will keep trying. It is that the screen is very small and so far, I cannot correct it by running it "maximized" or in the different screen resolutions.

If I can get this to run in a full screen mode, I will leave the answer here.
 

1 more replies
Relevance 54.53%

Each time I try to update the OneNote Web Clipper app via the Windows Store, it says the following in the screenshot.

Answer:Problems updating OneNote Web Clipper app from Windows Store

I have ran troubleshooting steps on this problem. Nothing seems to fix the problem. That's why I have came here for help. Please help!

4 more replies
Relevance 53.71%

Work has just had its first Windows 8 machine delivered and I am to test.

My first job is to test whether our effective but ancient MS Access with VBA frontend database works with it.

At first glance it doesn't, none of the OCX (32bit) files will register through syswow64 using the commands.

I have tried using 'Whosin' a free internet Database which seems to have a built in registration screen for 3 of the OCX files but I still don't know if they have registered.

Can anybody suggest anything? I am home now but can post the files which need registering when I get to work in the morning.

Any clues, help or preferably solutions will be much appreciated (by the way I have read an article saying Windows 8 doesn't have a registry which I find hard to believe).

Thanks for reading

Gaz

Answer:Registering OCX files with Windows 8 to run dated but necessary dbase

The files I am trying to register are

comdlg32.ocx
cryst32.ocx
msmask32.ocx
comctl32.ocx
msinet.ocx
tabctl32.ocx

I have searched the internet and cannot find any help.

Any help would be really appreciated.

Thanks for reading

Gareth

2 more replies
Relevance 47.56%

I installed the plug in webclipper, from http://pc.freediskspace.com/Index.asp. Its not working right and I just want it off my computer. I get no response from their tech support, and I can't find the application under add/remove programs. What do I do? And I need a recomondation as to some good virus software to install on my 350 mhz Intell Pent. II. I have a creative 48x cd-rom, and a V.90 56k Us Robotics voice Fax modem. Would the wrong driver stop my fax from operating? Does anyone know where to get the right drivers? HELP!
 

Answer:Web Clipper-from freediskspace.com

I like Norton AntiVirus.

If you want to try one for free though, go to www.antivirus.cai.com - it's pretty good too.

USR modem drivers:
http://consumer.3com.com/analog.html
[edit] - fixing my bad link
[This message has been edited by LarryCore (edited 03-11-2000).]
 

3 more replies
Relevance 47.56%
Question: Clipper Summer87

Hello! I have never debugged in Clipper Summer87. Could someone tell me how step by step? I use Plink86 to link and link using a .bat file.

Example of .bat:

clipper @prog -l
clipper main.prg -l -m
clipper index.prg -l -m
clipper rept.prg -m -l

plink86 @prog

Thanks in advance!
 

Answer:Clipper Summer87

12 more replies
Relevance 47.56%
Question: Clipper program

Hi all!
After upgrading Clipper program I cannot open DBF format file.
The error message: 'Corruption detected Clipper'. I tried to search from google but no answer.
What's the problem? What should I do?

More replies
Relevance 47.56%

I'm about to use Evernote Clipper after months. Ive tried multiple times to change password and log onto Evernote Clipper. It tells me the password I'd just changed it to...is incorrect. I've closed/opened Chrome, Evernote Clipper and my computer - and gone to download the latest version - evidently i had the latest. This is feeling like a mobius loop. Any thoughts? Thank you!message edited by Chrisjh

Answer:Evernote Clipper - can't log in

Have you spoken to Evernote support?

3 more replies
Relevance 47.56%
Question: Yankee Clipper fix

My YC has been dropping clippings. The YC website had me download a fix for that. Where I am now is that I have renamed to old YankClip.exe file to read YankClip.exeold, and now my YankClip[1] folder shows that old renamed file with a MS icon and the new file with a YC icon, just as was the case with the old file before I renamed it.

The YC instructions tell me to “Get the ZIP, stop the program, rename the old EXE, and finally copy the new file into the installation directory”. I wasn't sure at what point I was supposed to stop the program, I presume meaning the zip program, and how I was to do that, so what I did was to rename the old EXE first, and then download the new one without interrupting the program

Does what I did amount to “copying the new file into the installation directory"?

Since YC dropped clippings only sporadically, I am wanting to find out now if I did the fix right rather than just wait to see if the dropping problem happens again.

Thanks, grandpaw7
 

Answer:Yankee Clipper fix

Hiya

From what I'm reading, when they say 'stop the program', that may have been the YC program, not the zip.

The way I read it is as this..

Download the zip. Stop the YC program from running. Rename the exe to old, either like what you have done, or as YankClip.old, then open the zip, and extract the new exe into the same folder.

Is that what you did?

Regards

eddie
 

2 more replies
Relevance 47.56%

Yankee Clipper III YC3

A powerful Windows clipboard extender/memory- now in its third generation. Handles Pictures, Richtext, URLS, etc - any size. Features printing, drag and drop, optional permanent storage of clippings. Familiar "Outlook" interface. Freeware.




Features: Current version: 1.0.4.3
Saves past 200 text and RTF, 20 BMP and Metafile, and 200 URL clipboard entries.
Has the ability to save and re-use "boilerplate" clippings. Simply right-click on the item and select "Send to boilerplate". Unlimited boilerplate collections can be created.
URL aware- links copied to clipboard can be instantly launched.
Can float on top of other applications for fast pasting.
No size limits for "clippings".
Prints any text clipboard entry, nicely word-wrapped.
This is a simple program to understand and use.
Has a global hotkey to make the application visible when hidden, and another to instantly show and select past "clippings" without showing the application.
Clippings can be dragged & dropped to/from YCIII.
Can strip unwanted "quote" characters ("<", "|") from "clippings".
Supports ordering of boilerplate items.
Can automatically re-connect to clipboard when rogue applications break clipboard chain.

Answer:Yankee Clipper III YC3

This sounds like what I've been looking for, but does it work with Win 7-64? The site mentions only 32 bit systems.

9 more replies
Relevance 47.56%

Hi
I am running a clipper program on a novell network, and my client machines have been running on Windows 95/98.
I have been operating with the following line in the autoexec.bat :SET CLIPPER=E:00;F:250;SWAPPATH:'C:\WINDOWS\TEMP\'

I have a machine that is not running on Windows XP, and i have no idea where to add the above line, or how to make it work..
each time i try to run that program i get the following error "Unrecoverable Error 5311; cannot create VM swap file"
where do i set the variables in Windows XP?.

Thanks!
 

Answer:Need help with clipper program!

Linpin:

Go to C:\windows\system32, and edit Autoexec.NT and Config.NT there is where the environment variables and DOS configuration must be set, every Dos Box that is opened will use the values within this files.

Don´t expect to see them if you type the SET command, but they are initialized and the clipper program will read them.
 

1 more replies
Relevance 47.56%
Question: Yankee Clipper III

I don't know why, but I can never seem to understand the software instructions. I can get stuff to YC by highlighting it and clicking Edit>Copy, just like usual before I had YC. (I am surprised that the instructions don't say how to get stuff to the Clipboard.) But then how do I paste the stuff, say, in a document I am composing in MS Word? If you don't mind, I need the instructions you would give to a kindergartener. Thanks, grandpaw
 

Answer:Yankee Clipper III

If it is a Windozs app all the Windoze shortcut keys should apply

Ctrl + C = Copy
Ctrl + X = Cut
Ctrl + V = Paste
 

2 more replies
Relevance 47.56%

Hey i have a large .mpg file and i want to clip a section out of it. Do all programs need you to re-assemble all the parts before you play? I want to take a playable section out and delete the rest..like at specific start and end times and everything and then have a playable piece. I did a google search and there seems to be TONS of "editors". And they seem to do so many other things it all seems really complicated to go through all the programs. I would worry wich ones have spyware or would de-stabalize my system if they're done by amateurs.

Any Suggestions?
 

Answer:best MPG clipper/editor??

This is freeware. Not to hard to figure out.

1/ VirtualDub. If you want a close enough good enough edit just use virtualdub.

I've only used it on avi files but it seems to support other formats.
 

1 more replies
Relevance 47.15%

Hi
I have mcafee virus scan profession and its all up to date and also my win xp is up to date but virus scan keeps coming up saying I have these viruses. I try to quarantine them it says it cant as I dont have permissoons.

I have tried turning off my system restore then going to RUN and typing REGEDIT and doing a search for each virus then deleting but when I restart they are back again.

The files that mcaffee detects are

or32sys32.exe
spsp32.exe
hhms64pe.exe
sy32nt.exe

any help is appreciated

Thanks
 

Answer:BackDoor-CJO, AD-Clipper & downloader-OX

I was seeing McAfee return Downloader-OX and two other adware / virus threats. If you will look in the far right of the McAfee notification window (at least with McAfee Enterprise Edition) you will notice what applications are causing you the trouble.

I couldn't see anything in my startup files - either through regedit or Hijackthis! - I simply deleted the infected files (which turned out to be mplayer.exe and TELNET.EXE) and Windows XP restored them.

I'll let you know if I run across anything else, but I seem to be running clean. McAfee seemed to catch the infection before it spread, but everytime I ran Media Player the virus seemed to try and reactivate. Telnet.exe seemed to be automatically being called at points, but after deletion and recreation I haven't seen the problem return.

This issue must be new enough to not have very many posts. McAfee's VIL was no help whatsoever
 

1 more replies
Relevance 47.15%

Operating System: Win 7/64
Computer: HP Elite i7

Problem: Somehow, the Clipper Tool (part of Windows 7) has disappeared. I did not receive the installation disks with my computer. What can I do to reinstall the app?
 

Answer:MS Clipper Tool Disapeared

I guess you mean the snipping tool. It has probably simply disappeared from the Start menu so type snip in the Start > Search box. Snipping tool should appear above.
 

2 more replies
Relevance 47.15%

Hi! I know, this is an old system. I program using VB but every now and then I need to make a change in an old, forgotten system and I really don't have any experience in Clipper. I hope I can find help in this forum.

I am trying to do a create. I have the following but i keep getting a TYPE MISMATCH error:

cPath = "C:\"
cStr = "TempTab"
SELECT 0
CREATE (cPath + cString)

What could I be doing wrong? I am trying to create an empty table to store the TempTab structure info in a new work area.

Thanks in advance!
 

Answer:Clipper Summer87 Question

What are the datatypes for cstr and cpath?

I do not know clipper, but I would guess you need to caste them to be the same, or the same as CREATE supports.

Also, a quick google makes me think you need to use dircreate to create a folder...
http://www.itlnet.net/programming/program/reference/c53g01c/ng39600.html
 

1 more replies
Relevance 47.15%

After getting my new XP computer, I downloaded the clipboard utility Yankee Clipper, which I used a lot on my older computer. However, I found out I downloaded the wrong version rather than the one I wanted and was used to. So I uninstalled it yesterday morning and instead installed the version I wanted. Then, I got to messing around trying to get YC on my startup and Quick Launch. Somehow, I messed things up so that YC wouldn't work. So I attempted to uninstall this second version of YC (the one I wanted). Add/Remove went through the usual procedure as though the uninstall worked fine. But it didn't. YC was no longer in Add/Remove, but it was big as life everywhere else although it still worked poorly. Then, I used System Restore to go back to yesterday morning before I uninstalled the version I didn't want. I wanted to start all over. So I tried to uninstall that version so I could newly install the good version. But now the bad version won't uninstall. When I try to do that via Add/Remove, I get a Wise Uninstall error saying "Could not open INSTALL.LOG file.

I have no idea what to do now. For one thing, I wonder if the error message means that the Add/Remove program now won't work for anything, or if that error message just applied to YC. I've thought about downloading free uninstaller but I prefer not to do anything till I can get some expert input.

Thank, grandpaw
 

Answer:Can't uninstall Yankee Clipper

6 more replies
Relevance 47.15%

The OneNote Web Clipper suddenly stopped working on all my browsers and computers. I cannot login and I am prompted to enable 3rd party cookies. I have tried deleting all cookies, uninstalling the extension and reinstalling it, but it doesn't work.
I have tried this on Chrome, Firefox and Edge. On all browsers the OneNote Clipper stopped working.
I also found a thread that started today at Microsoft: https://answers.microsoft.com/en-us/msoffice/forum/msoffice_onenote-mso_winother-msoversion_other/onenote-clipper-stopped-working-today-in-chrome/20669212-dc0c-43a0-84bb-e5390dd97bf9
Any ideas?

More replies
Relevance 47.15%

Download: OneNote Clipper

Save anything on the web to OneNote in one click

Keep all your web research in one place. Clip it to OneNote, organize it, and access it from any device.

OneNote Clipper - the easiest way to save anything on the web to OneNote in just one click. It's like your camera for the web.

Researching for a big trip? Gathering recipes for an upcoming party? Collecting inspiration for a home makeover? The OneNote Clipper helps you do all of this quickly and easily. Think of it as your camera for the web, snapshotting any webpage you see directly into OneNote.​
Features

One-click to save any webpage with the extension toolbar OneNote button
One-click to view your clipped webpage in OneNote Online directly from the OneNote Clipper
All of your clips are saved to the Quick Notes section of your default notebook on OneDrive - automatically accessible and fully searchable on all your devices

 

More replies
Relevance 47.15%

Hello, I am using Clipper 5.2 and would like to know how to display a logo at the top of a letter before printing it out. Please help. Thanks!!

Answer:clipper 5.2 how to display logo

If you mean the database application. You will have to embed the logo or download it to the printer.

4 more replies
Relevance 46.33%

I am using Yankee Clipper III (YC3) under Win7 64bit. Occasionally it looses the boilerplates and I can't get them back other than by recreating them. Under Win XP, according to what I have been able to find, the boilerplates are kept in Program Files/YCIII. That doesn't seem to the the case for Win 7. I have restored the YCIII portion of Program Files X86 from a True Image Backup but the boilerplates are still not there.

Will someone please help me get around the problem of having to recreate the boilerplates each time YC3 looses them?

Thank you very much.

Answer:Yankee Clipper III looses its boilerplates

About a year ago I posted this problem and never received a reply. I have nor used this machine very much until recently. The problem just occurred again so here I am again.

Yankee Clipper III looses its boilerplates

I am using Yankee Clipper III (YC3) under Windows 7 64bit. Occasionally it looses the boilerplates and I can't get them back other than by recreating them. Under Win XP, according to what I have been able to find, the boilerplates are kept in Program Files/YCIII. That doesn't seem to the the case for Win 7. I have restored the YCIII portion of Program Files X86 from a True Image Backup but the boilerplates are still not there.

Will someone please help me get around the problem of having to recreate the boilerplates each time YC3 looses them?

Thank you very much.

1 more replies
Relevance 46.33%

I have used Yankee Clipper for a number of years now and it has been a great deal of help to me, largely because of its simplicity. But after I got XP the YC icon on my System Tray started to disappear, not always, but when it did I couldn't find a way to get the YC window to display. When I would click on the YC icon on my desktop or go to YC in Windows Explorer, I would get a message that YC was already running and to look at the System Tray (where the YC icon was no longer there).

YC told me that the problem must have something to do with XP, but couldn't say what. YC suggested that I click Ctrl/Alt/Y. That sometimes brought up the YC screen but not always. It didn't restore the icon to the System Tray.

I wonder if anyone has a suggestion as to what might be the problem and how I can solve it.

grandpaw7
 

Answer:Disappearing Yankee Clipper icon

Perhaps it's not in your startup and should be (and used to be)?

Hit Start-->Run and type msconfig and hit enter.
Go to the Startup tab.
Do you see anything that resembles Yankee Clipper?
If you do and it is NOT checked, check it.
If you don't, reinstall Yankee Clipper. See if you're asked if you want it to start when Windows starts (or to put an icon in the system tray) and say "yes".
 

3 more replies
Relevance 46.33%

We are in the process of developing apps for a manufacturing company and we are stump as to which programming language will be best. The apps wil include all accounts, production, warehousing, etc. and we estimate that it would involve a rather large database. We are thinking of using the ca-clippper language to develop the apps.

Pls give us you opinions and advices. We truly appreciate all opinions and advices.

Thanks & Regards.
 

More replies
Relevance 45.92%
Question: Dbase to text

Quick sketch of the situation: we have a 3rd party stock management application that is written in Foxpro and stores its data in DBF files. One of our customers has asked me if we can provide an hourly update of our stock levels in the form of an .TXT file that has to be FTP’ed to the server of our customer.

I’m trying to find a solution to automate this process.
Technically, it means I have to find a solution to read a DBF file and export a limited number of fields to a comma delimited text file. I can’t export the entire DBF file, because it contains information that our customer is not allowed to know (our purchase price, our profit margin, etc). The whole thing should run without user interaction on a MS Small Business Server. I can’t afford to run the program manually every hour.

Any idea how this could be accomplished? I would like to keep the solution as simple as possible of course.
 

Answer:Dbase to text

7 more replies
Relevance 45.92%

Will dBase III operate on Windows XP?
 

Answer:dBase III Compatibility

ram15 said:

Will dBase III operate on Windows XP?Click to expand...

I'm responding to this because nobody else has. I've not tried using dBIII files directly with XP, but my guess is it will work. The reason I think it will is that virtually all DB programs, including those that only run in XP, will read and export to dBIII or -IV format. Those formats are the defacto universal format for database files.

To illustrate, I write DB apps in MS Access, which will read and export to dbIII or IV format. I also maintain backup records for a small company that still uses (can you believe?!) PFS File, a 1984 DOS program. It runs perfectly under XP, and exports to dbIII format, which I use frequently to bring the records into Access to do some serious report formatting.
 

2 more replies
Relevance 45.92%

Hi

i have a question i have a warehouse and i use microsoft exel for my
main stock list and when i have sold some stock i copy it from exel and then save it as Dbase and use a program called winlabel to make sticker for the goods that works good
but can any one think of a way to make it easier but 1 thing has to stay the same and that is that the stocklist stays in exel?
any ideas?

thanks in advance
adam
 

Answer:help with exel and Dbase

Hello computerhelp, are the addresses or whatever the stickers have on them available to Excel?
If they are you could format an excel sheet to print the stickers and use VBA to populate it, print it, repopulate it etc.
Or you could transfer the whole thing to Access and do it from there
 

1 more replies
Relevance 45.92%
Question: Visual DBase

Help --- Is there away to have Visual DBase delete records automatically after a certain amount of time?
 

Answer:Visual DBase

Visual Dbase is made by whom?
 

2 more replies
Relevance 45.92%

I have a Dbase (Database Program)that runs on my old W3.11 PC. How do I go about installing Dbase on my W98 PC, as I have some useful data I wish to reference before the old PC dies. Thanks David

Answer:Run DBase Version 4 (DOS) on W98 PC

first of all, copy the files into a new folder in C: , preferably dbase,(it will make it easier to find, also keep it less then 8 letters long).If the DBASE is a true dos based utility then you would need to Shutdown and restart in DOS, then at the prompt type dir +press enterthen typecd dbase +press enter (or whatever you have called the new folder)look for the install or setup file,type install or setup, hopefully this will install the app and you should then be able to run it by typing its name,if it doesnt have an install or setup but has a file with a exe extension then try typing that eg. dbase.exe, just type dbase +press enterHope this helpsps i presume you have tried it in windows 98, if not then try it in windows first.good luck

4 more replies
Relevance 45.92%
Question: Dbase to Access

Is there away to move the queries and reports from a dbase program to the access program so that they do not have to be recreated?
 

Answer:Dbase to Access

Access is a database program, but it depends on which program...

For tables, the quick and dirty, if available to you, is to export the entire table in a delimited file (comma, space, tab, etc), you can then easily import into Access.

If you can view your existing queries in a SQL format, you can cut them and paste them into a new Access query by using the SQL view instead of the default Design View (please note that on some intricate SQL queries, you won't be able to view the query in Design View at all...limitation of the type of graphical interface Access uses..

I think you may just be sol on the reports, though....maybe someone else has an idea on this....?

MBN
 

1 more replies
Relevance 45.92%

Hi

i have a question i have a warehouse and i use microsoft exel for my
main stock list and when i have sold some stock i copy it from exel and then save it as Dbase and use a program called winlabel to make sticker for the goods that works good
but can any one think of a way to make it easier but 1 thing has to stay the same and that is that the stocklist stays in exel?
any ideas?

thanks in advance
adam
 

Answer:help with exel and Dbase

Computerhelp, in case you still haven't gotten an answer to your question click on the red triangle and ask one of the Mods to move your thread to the Business Application forum.
 

1 more replies
Relevance 45.92%
Question: Borlands DBASE IV

Does anyone know if Borland's DBASE IV is compatible with XP Professional?

Answer:Borlands DBASE IV

The program may appear to run, but compiled applications won't run properly. The current Windows-compatible version is dBASE Plus.

2 more replies
Relevance 45.92%

I've been dBASE programming since the days of dBASE III, and am currently using dBASE PLUS running under Windows XP. My programming techniques are unchanged since my early days, except for the absolute minimum changes necessary to keep things working under the various versions of dBASE and Windows. (Before anyone asks, the only reason I keep upgrading from previous versions of dBASE and Windows is because I sell my programs and need keep them up to date with the latest Windows.)I'm conscious that one of these days I'm going to have to make the jump to object-oriented programming, rather than my DOS-based methods, because each new release of dBASE drops support for one or two commands; but I can hardly understand one word of the dBASE user "guides".So, the point of this posting is, can anyone recommend a simple first-principles guide to the current best-practice programming techniques for dBASE PLUS?

Answer:Any dBASE users out there?

Here are some URL's I have found:click hereclick here click herebut you could find more by typing <dBASE PLUS> into any search engine

6 more replies
Relevance 45.92%

is there any easy way to bypass a locked dbase in act? I am trying to open a dbase on a employee's pc that is nolonger in the office.

Answer:Unlocking An Act Dbase

No subject matter will be allowed whose purpose is to defeat existing copyright or security measures. If a user persists and/or the activity is obviously illegal the staff reserves the right to remove such content and/or ban the user.Quote taken from [http://www.bleepingcomputer.com/boardrules.php]BleepingComputer.com Message Board Rules[/url].Since Bleeping Computer has no way of verifying, the statements you made. We cannot allow this topic to continue. My suggestion is you contact the former employee and get the password. Since this is legally company property per your claims, they can be compelled to divulge the password. The other option is that if the company has a license for the software you can contact software support. They may be able to help you.This topic is now closed.Animal, Forum Moderator

1 more replies
Relevance 45.51%

I like to use different databases. And one of them is Dbase Plus 10. But some hours ago I have opened my database: File does not exist. This error was viewed me without any reason. Any suggestion with repair foxpro dbf.

More replies
Relevance 45.51%

Beginner

I have an app that creates a dbase file from a dummy file. Works well in 98 an XP. I need it to work with 95 as well, but it comes up with '[ADODC]: Unknown Error. [ADO]' I cannot figure out what .dll file is not being registered for 95.

If I load vb6 then alls well again in 95. Help in this matter will be greatly appreciated...!
 

Answer:(Solved) dbase query for vb6

7 more replies
Relevance 45.51%

I have an okidata printer connected to an emachine computer running windows xp pro but I use dbase programs. The problem is that when the program says print, nothing prints. The printer prints windows programs and when the printer is hooked to another computer it will print dbase programs. Is this an "emachine"? If so, can it be corrected?
 

More replies
Relevance 45.51%

I recently bought a new HP laptop loaded with Windows Vista Home Premium. In addition, I bought a new HP Officejet Pro printer. My problem is that I can't print from an old DBase program that I copied over to my new laptop. I have read that there are problems printing from DOS based programs to printers that connect to USB ports. Does anyone know of a method that would allow me to print from DBase to my new printer?

Thanks for any help!

ronniecr1

More replies
Relevance 45.51%

Help -- I have a computer running Visual DBase, the reports are created through crystal reports -- I am getting the error message CRW - Error has occurred in program close or ignored -- Is there a fix to this?
 

Answer:Crystal Reports Through DBase

Hi, tig. I'm thinking CRW is just crystal reports writer. Read and follow the directions under Periodic Hard Drive Maintenance in Article III for troubleshooting any of these types of errors. Once that's done, if the problem still remains, you move on to pinpointing an issue specific with crystal reports. If you do this type of maintenance regularly, then just let me know, and I'll see if I can't find something more specific. (I don't use CR myself)

------------------
~dreamboat~
WeDoManuals
Brainbench MVP for Microsoft Word
Brainbench
 

1 more replies
Relevance 45.51%

I have a new PC w/Vista and only USB ports. I have a HP P2015 laser jet w/ only a USB port. I work with DBase 3 and Dbase 4 which still work fine with Vista but won't print. The long list of HP printers in the Dbase installation programs does not list the P2015 and only lists series or parallel ports. Any good words of wisdom? Thank you all.

And now not so happtoldster
 

Answer:DBase Driver needed

I recently had to get a P2015 printer to work with HTBasic (I think it pre-dates Microsoft). You need to enable file and printer sharing in Vista, and share the printer. Then redirect the printer to LPT1 using this command typed at a prompt, substituting your own computer and printer share names:

NET USE LPT1: \\Computer Name\Printer /PERSISTENT:YES
 

1 more replies
Relevance 45.51%

I'm a novice Access/database user with probably a novice problem. I am trying to export from Access to dBASE. I have followed the instructions for exporting data, searched the help function, the archives in this forum, and my books on Access and have not found the answer to my problem. When I try to save the query to a dBase file, I get a message that reads "field will not fit in record" I have the fields set up in the Access table exactly as the dBase user (my boss) described them. I have checked the fields in each record to see if the data is the correct size. The largest field is 34 and that is how my boss has it set up in his dBase tables. I have no idea how to proceed, and hope someone can help me. Thank you,
 

Answer:Exporting to dBase from Access

13 more replies
Relevance 45.51%

I have used dbase 3 for many years and it still runs on XP. It is doing everything I need and I have kept it because it is simple and does everything I need.

In the future, I doubt that this program will continue to work with newer operating systems and was wondering if anyone knows of a simple program that will import dbase files, sort when needed, and index when needed. That is all I need.

Thanks
 

Answer:Need program to replace dBase 3

I can strongly suggest ALPHA FIVE by Alpha Software.

http://www.alphasoftware.com/

Alpha Five will even be able to use your DBIII files directly in it. Of course, you can also import them into new tables if you want.

Thanks!

Shane
 

1 more replies
Relevance 45.1%

I had created web site which is working fine on my machine I am using the following tools
LANGUAGE = ASP.NET
DATABASE = Dbase

PROBLEM:
I am getting database connection error when I am running this website on server, The Dbase also resides on the same server

CONNECTIONSTRING:
I am using following connection string

“Provider=Microsoft.Jet.OLEDB.4.0;Data Source=D:\\Prism Plus\\Ho_data;Extended Properties=DBASE IV;”

ERROR MESSAGE:

“'D:\Prism Plus\Ho_data' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.”

I will appreciate any help and suggestion
Imran
 

Answer:DBase database connection Problem

so on your server where things aren't working. if you browse to here : 'D:\Prism Plus\Ho_data is there anything there? My guess is no. Your data is probably sitting somewhere else... Maybe crive or e: goodluck
 

1 more replies
Relevance 45.1%

why Visual dBASE won't run in Vista 64 bit version.how to make it runnable

More replies
Relevance 45.1%

For several years now I've been distributing a program written and compiled using various versions of dBASE. Until recently I was on dB2K running under Windows 98SE, and my program would run under anything from Win 3.1 to 2000.Now I've upgraded to Win XP and dBASE PLUS. My program runs okay and compiles okay, and appears to install okay on my customers' machines. But when they try to run it they get an error message "error loading idapi32.dll".The strange thing is the idapi32.dll is a file associated with dB2K and, so far as I can see, is not part of dBASE PLUS or its runtime engine. Any ideas, please?

Answer:dBASE PLUS "error loading IDAPI32.DLL"

using xp compatibilty wizard

10 more replies
Relevance 45.1%

Please email [email protected] and I'll forward an email to you. Thanks!

------------------
~dreamboat~
Brainbench MVP for Microsoft Word
Brainbench
 

More replies
Relevance 45.1%

dbase 3+ I run it now on Windows 98 but I would like to run it on Vista Home Premium

Answer:Can Dbase 3+ run on Vista Home Premuim?

It should run as Vista 32bit still supports legacy DOS applications in a textual window. However Vista doesn't allow full screen for DOS programs. If you need full screen mode you have to run DBase inside a virtual machine as MS Virtual PC under a guest OS as Win 98, MS DOS or FreeDOS.

3 more replies
Relevance 45.1%

I usually pick up on this kind of thing quickly, but SQL Server 2008 R2 is anything but simple.

The first issue I'm running up against is that I'm trying to transfer a database from our old server, running SQL Server Express 2005, to our new server running SQL Server 2008 R2. I did a simple backup and restore using SQL Management Studio. Now, I can see the database using SMS on the new server, but it doesn't show up in the SQL Configuration Manager. As such, I don't think the database is actually 'running' or being advertised. My experience with the full-blown SQL Server software is limited, so I'm not sure what I'm missing.

More replies
Relevance 45.1%

Hi

Can anyone tell me how I go about flagging up a record that becomes 3 days old.

example: Reps report... enter a date.... click a check box to say 3 day follow up. how do I get that report to flag up when it becomes 3 days old??????????????????

What is the formula to work out 3 days from entry and where or what field do I attach it to

Any help would be appreciated guys
 

More replies
Relevance 44.28%

anyone know if you can open /transfer dbase 5.7 files to office 2003 access. or any guide as to how to convert them to M/S aplication ,for presentation use ..Thanks .

Answer:convert Dbase 5.7 files to access 2003

click hereso it shopuld do the trick.Thanks for reading .

1 more replies
Relevance 44.28%

Is there a way to link an Access 2002 dbase file to a
contact listing in Outlook 2002? I have extracted names,
addresses and e-mail addresses from an Access dbase file and imported them into Outlook contacts under Public Folders.
If the Access file is updated with this information,
the user is requesting the contacts be updated as well in
Outlook. Just looking for an automated way to do this.

Thanks.
 

More replies
Relevance 43.87%

I have been reworking a small existing medical research database. In expanding the data fields, I've run into several 'major' problems. Some I have resolved and some proved to be too complex for my limited knowledge. Now I question whether the original dbase design is adequate for the task?

The basis of the study is to follow each patient through cardiac rehab (pre and post) and then to track each patient for 5 years of follow-up (one time per year).

This adds up to 7 visits per patient, times each of the factors (apprx 50). This is where I have the problem. The list of items tracked is extensive, lab values, medications (i.e. increased, reduced), vital signs, level of compliance, cholesterol levels, positive risk factors (i.e. diabetic, hypertensive) etc.

The original dbase tracked the patients for 3 years, and for fewer factors. It worked well. The data entry form was on one page. It was set up as a relational dbase one-to-many (each patient's basic info-to-all variables).

My problem began as I extended each factor by two years, and then added additional subjects for the five years... I ran into the "255" max fields error.

I have a table of basic patient info, name, age, doctor, start date of cardiac rehab, etc. I have rebuilt the dbase from scratch, several times. I broke out each field group (i.e. blood pressure, cholesterol, medications) into a table of its own. I have tried splitting the entry data form into several, I would '... Read more

Answer:Solved: MS Access 2000 - medical research dbase

16 more replies
Relevance 43.87%

When I attempt to import DBase III data into Access 2000, I get the error message: "The search key was not found in any record". What does this mean, and what do I do to get that data in? It is a .dbf file. It has a .dbt file associated, by the way... should that come in automatically?
 

Answer:Import DBase III date to Access 2000 error

Having similar problem with a DBase file. It is linked into Access 2000 however when we run any form of query against the table we get the "Search key was not found in any record" message.

We have tried the same table in other data center locations and do not have the problem so it seams to be specific to this one file. If you have any info it would be welcomed. If we find any answers to this we will pass them on.

Thanks
M
 

2 more replies
Relevance 43.05%

Hi

Have a new 64bit server running Win2k3 enterprise edition SP1 64bit and loaded Office Pro 2003. Our web people use ASP to get the backend system working

All seems ok until we apply the new IP and then try to login through the webpage which denies access to the dbase and secure area. Our web people say that our 64 bit win2k3 and Access 2003 are wrong together!! MS tell me win2k3 64bit & Access 2003 are good together

Can someone help explain where the incompatibility comes in since multiple web searches cannot locate anyone with this problem and so I cannot find a fix for them. They want me to now buy the std 32 bit OS (lol)

Someone please help with a fix (please explain simply as I'm neither a web, ASP, Access etc person)

Thanks, JB
 

More replies
Relevance 36.9%

About 6 months ago I upgraded from M$ Office Pro 2002 to M$ Office Home & Business 2010.
Just after Christmas, one of my ex-Staff contacted me for details of her employment with me (between 1988 and 2005) and a letter of Reference.
Now I have the old Staff Database in my Archives, but cannot access it as Home and Business does not include Access. I no longer have the old Office (2002) Disks.
Is there any free software that I can use to View that old Access dBase? I do not need to amend it in any way.

Answer:Viewing an Access dBase without Access

http://en.kioskea.net/download/download-6854-ms-access-database-viewer

1 more replies
Relevance 17.63%

When you try to connect to the Microsoft Windows Update Web site or to the Microsoft Update Web site, you may receive the following error code in the windowsupdate.log or CBS.log:
0xC80001FE, 0x80200010, 0x80070643, 0x80246002, 0x80070490, 0x80070420, 0x80073712, 0x80246007, 0x80000FFF, 0x80070424, 0x80248007, 0x8007064C, 0x8024D00C, 0x8007066A, 0x80245003, 0x8024402C, Failed Service pack installation. KB2509997 discusses how to troubleshoot these issues.
Also check out this post: Windows Update Troubleshooter from Microsoft.

Answer:Unable to install Windows Updates in Windows Vista, Windows 7, Windows Server 2008

nothing you said workd on 7 ultimate , also nothing microsoft has will work either I been try ing to download updates for 3 1/2 months cannot do it.
What exactly is happening when you try to update? Getting error code? or nothing? Also what internet security do you use. Could possibly have something installed that is blocking access to the Windows Update site.

3 more replies
Relevance 17.63%

when windows rebooted after the downgrade it immediately went into Windows update and began downloading windows 10 then said ready to install windows 10 with a get satrted option available. I have not been able to change this and get any windows 8.1 updates. I want to be able to remove any requests to downlaod and install windows 10. Have already had one session with tech support from Microsoft and they were unable to fix the problem so far.

More replies
Relevance 16.81%

i went back to windows 7 from windows 10. I have not been able to install windows updates since then. I would like to return to windows 10

More replies
Relevance 16.81%

Windows Vista x86 and Windows 7 x86 users in Catch 22 situation trying to restore systems!
During Factory Restore of Vista x86, upgrade of Vista x86 to Windows 7 Ultimate x86 SP1, or install of Windows 7 Ultimate x86 SP1 and validating install online, Windows Update fails after mandated update.
Unable to manually download requisite updates due to "Browser our of date" error from Microsoft Support website!
Downloads only available from Support.Microsoft.com website

More replies
Relevance 16.4%

Microsoft announced recently that Windows 7 SP1 & Windows 8.1 users have until July 29, 2016 to exercise their option to upgrade their systems to Windows 10 for free  Effective July 29, 2016, Windows 7 SP1 & Windows 8.1 users will have to purchase the Windows 10 upgrade from Microsoft  Microsoft's goal is to help our customers get the most secure and best version of Windows before the promotional offer expires on July 29  Effective immediately, customers on Windows 7 SP1, and Windows 8.1 whose Windows Update settings are configured to accept 'Recommended' updates may start seeing the below notification even if they have not previously reserved the Windows 10 upgrade  If the customer does not cancel or reschedule, by default the upgrade will install at the scheduled time. 

More replies
Relevance 16.4%

The above 2 updates keep coming to my Windows Update but when I install the (2) KB's it says download not installed "Try again" and in History "Install Fail". Please help me, sooo frustrated at this point, usually don't have
issues

Ruth M. Stauffer

More replies
Relevance 16.4%

 

Microsoft announced recently that Windows 7 SP1 & Windows 8.1 users have until July 29, 2016 to exercise their option to upgrade their systems to Windows 10 for free


Effective July 29, 2016, Windows 7 SP1 & Windows 8.1 users will have to purchase the Windows 10 upgrade from Microsoft


Microsoft's goal is to help our customers get the most secure and best version of Windows before the promotional offer expires on July 29


Effective immediately, customers on Windows 7 SP1, and Windows 8.1 whose Windows Update settings are configured to accept 'Recommended' updates may start seeing the below notification even if they have not previously reserved the Windows 10 upgrade


If the customer does not cancel or reschedule, by default the upgrade will install at the scheduled time

 
 

More replies
Relevance 16.4%

Microsoft announced recently that Windows 7 SP1 & Windows 8.1 users have until July 29, 2016 to exercise their option to upgrade their systems to Windows 10 for free  Effective July 29, 2016, Windows 7 SP1 & Windows 8.1 users will have to purchase the Windows 10 upgrade from Microsoft  Microsoft's goal is to help our customers get the most secure and best version of Windows before the promotional offer expires on July 29  Effective immediately, customers on Windows 7 SP1, and Windows 8.1 whose Windows Update settings are configured to accept 'Recommended' updates may start seeing the below notification even if they have not previously reserved the Windows 10 upgrade  If the customer does not cancel or reschedule, by default the upgrade will install at the scheduled time 

More replies
Relevance 16.4%

Hi,I have been looking for a solution to upgrade my Inspiron 1525 laptop, preinstalled with Vista Home Premium 32 bits when I bought it.The target is to prepare path to upgrade to Windows 10.I need Windows 7 or 8 to start with.I could not find a way on Dell website.
Many thanks in advance !Isabelle

Answer:Upgrade for my Inspiron 1525 Laptop from Windows Vista Home Premium 32 bits to Windows 7 or 8 and then to Windows 10

Hi,
Thank you for writing to us!
We would like to inform you that the Inspiron 1525 is not tested for windows 10 and we would not suggest that you upgrade the version of windows 
Kindly private message the service tag and email address.
Thanks
Robin

2 more replies
Relevance 16.4%

Windows 8 Start Screen is a freeware for Windows XP, Windows Vista and Windows offering closest resemblance to Windows 8 like touch like scrolling by dragging. This wonderful freeware Windows 8 Start Screen is licensed under Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 License and is created by dncube. http://dncube.deviantart.com/journal...nd-7-285378349

More replies
Relevance 16.4%

Guys I have "iball slide i701" tab. Help me to install Windows 7 or Windows 8.1. THe mentioned Tab received with Windows 10 OS. RAM in the tab is less and keeps on hanging frequently.

More replies
Relevance 16.4%

guys i have windows 8 pro. i want windows 10 . i cant upgrade to windows 8.1 and then get the upgrde for windows 10. please help me. when i go to the store i dont see the windows 8.1 update nor the windows 10 update

More replies
Relevance 16.4%
Relevance 16.4%
Relevance 16.4%

i am not good at english, hope i can make myself clear.hello, everyone. this is all my fault. i download a movie call "Brave" via torrent from internet. after download i can't open the video file, the readme file tell me that i need to install a decoder software in the same folder. i use the microsoft security essential to scan this "decoder", all good. so i install it after scaning.then, bad thing happened. the microsoft security essential realtime protection shut down. windows fire wall shut down. windows update shut down. the most important, all of those three could not be restart and i can't find each of them in the services.msci search on google for a solution. it take a long time. finally, i found something on the google. the solution is use "sc" command to recreate the service on services.msc. then i download a reg file called "wscsvc.reg" from that site, and import it to the system.http://pressf1.pcworld.co.nz/showthread.php?116524-Win7-Security-Centre-service-missing-after-malware-infectionWindows Registry Editor Version 5.00[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\wscsvc]"DisplayName"="@%SystemRoot%\\System32\\wscsvc.dll,-200""ErrorControl"=dword:00000001"ImagePath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\ 74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\ 00,76,... Read more

Answer:missing server Windows security center, windows firewall and windows update in services.msc

DownloadTDSSkillerLaunch it.Click on change parameters-Select TDLFS file systemClick on "Scan".Please post the LOG report(log file should be in your C drive) Do not change the default options on scan resultsDownloadaswMBRLaunch it, allow it to download latest Avast! virus definitionsClick the "Scan" button to start scan.After scan finishes,click on Save logPost the log results hereDownloadESET online scannerInstall itClick on START,it should download the virus definitionsWhen scan gets completed,click on LIST of found threatsExport the list to desktop,copy the contents of the text file in your reply

23 more replies
Relevance 16.4%

Only 9 days to go before the upgrade is no longer available and i need some help please. It looks like the windows 10 was able to download, but not able to install but i don't know.??

More replies
Relevance 15.99%

Microsoft plans to release the latest version of Windows 10 Technical Preview build (Windows 10 Consumer Preview build) in the third or fourth week of January, 2015. The Consumer Preview build will include many new features and improvements in addition to the features that we have already seen in the officially released Windows 10 9841 and 9879 builds.

When Microsoft releases the consumer preview (Windows 10 Technical Preview for consumers) build of Windows 10 in January, existing users who are running the official Windows 10 9879 build will be able to upgrade to the latest build by retaining data and installed programs.

For users who would like to perform a clean install of the latest build Microsoft will offer ISO image of the same. Users can then install Windows 10 on a virtual machine or prepare the bootable USB to install Windows 10 from USB on PC.

For those Windows 7 and Windows 8.1 users who would like to upgrade their existing installation to the latest Windows 10 Preview build in January, Microsoft has released a free tool which will automatically serve you the latest Windows 10 Preview build via Windows Update in early 2015. That is, in simple words, Windows 7 and Windows 8.1 users can upgrade to Windows 10 Preview via Windows Update when the official preview is made available in early 2015.

To get Windows 10 Preview via Windows Updates in early 2015, you just need to download and run a small tool named Prepare Windows 8.1/7 for Windows Technical Preview build. ... Read more

Answer:Microsoft Releases Tool To Prepare Windows 7/8.1 PC To Get Windows 10 Preview Via Windows Updates

Will it be possible to upgrade from TP to the final version when it comes out without the need of fresh install?
 

8 more replies
Relevance 15.99%

How to install Windows 10 on a Dell OptiPlex 3040 MT coming with Windows 7 Pro x64 installed (and which includes a Windows 10 Pro license)?
The system comes with a DVD labeled Windows 10 Pro x64 reading "use to reinstall the operating system on a system with OS installed"

More replies
Relevance 15.99%

Hi everyone, I'm trying to update my Sony VAIO Flip 13 (SVF13N17PXB) with Windows 8.1 Pro to Windows 10 Pro. During the installation process (Installing features and drivers part) I get stock on 6% of "features and driver installation" (for like a good 30 min). Then installation get stock on 71% (overall % completion), a time at which I get a BSOD (DRIVER_POWER_STATE_FAILURE).
After the restart (rolling back to Windows 8.1 of course), I get a windows update error: C1900101-40017.
I suspect this is a driver issue, does anyone have this same problem and knows what might be causing this issue (I successfully updated my Sony VAIO DUO 11 in ~20 minutes with no problem, and my drivers and Windows updates in that computer were really out of date so I don't know what the issue might be).
Thanks everyone beforehand

Answer:Getting BSOD Windows 8.1 Pro to Windows 10 Pro (at ~72%) - Windows update error code: C1900101-40017

No body having this issue? Well that's interesting

2 more replies
Relevance 15.99%

I own several computers. Some PC's and a mid-2010 iMac 27 inch. Windows 10 upgrade worked fine on my PC's. After I signed up for the upgrade on my iMac Bootcamp running Windows 7 Ultimate, Apple announced it will not support my particular iMac version. I
have tried to no avail to stop the Windows 10 upgrade, which has failed several times. I have uninstalled Windows updates associated with the upgrade: KB 3035583, KB 3033929, and KB2952664, and hidden them in Windows Update. Any suggestions as to how to stop
Windows 10 upgrade? Any work around to install the upgrade on my iMac?

Thanks, Jeff

More replies
Relevance 15.99%

When I upgraded I lost use of the bluetooth service on my HP Pavillion DV7 notebook with
Intel Centrino Wireless-N o + WiMAX 6150 chip. The bluetooth driver was not working and identified as the Atheros driver. I went to the Intel site and downloaded and updated the latest Wimax 6150 driver for Windows 10 64 bit and
also updated the laptop chipset. The bluetooth driver was unchanged.
Upon further reading on the Intel site, I read that when the Wimax 6150 is using Windows 7, the bluetooth driver is Atheros, but when using Windows 8.1, or 10, it requires a Wimax 6150 bluetooth driver. Fair enough, except that Intel
does not offer this particular driver!
I tried first to update the Atheros driver, but it said it was the latest one, and up to date. I then deleted the Atheros driver hoping that its replacement would be installed with the Wimax 6150 update, but nothing happened. Now,
in Device Manager, I no longer have a line for bluetooth since I deleted the Atheros driver. Can someone point me to a site that has a Wimax 6150 bluetooth driver for Windows 10- I'd like to use my bluetooth service on this laptop!

More replies
Relevance 15.99%

Hello. I have a question.

When I disable the Aero Snap (& consequently Aero Shake) option, I notice that my mouse/pointer scheme is also changed to "None" from the Windows 7 default setting "Windows Aero (system scheme)". When I turn back on "Windows Aero (system scheme)", I turn back on Aero Snap (& consequently Aero Shake) option.

I want to have the "Windows Aero (system scheme)" for my mouse/pointers scheme, but disable the Aero Snap (& consequently Aero Shake) option. How can I do that? Can I? What do I need to do?

I am assuming it may not be through conventional means (like checking boxes or changing drop down menus), but changes to file paths or registries maybe?

Please reply.

Thank you!
 

Answer:When Disabling Windows Snap in Windows 7, Loose Windows Aero Pointers Scheme?

Stand corrected now... ...When I turn back on "Windows Aero (system scheme)", I DO NOT turn back on Aero Snap (& consequently Aero Shake) option. Good. I do not know what was happening then??? Maybe someone can still elaborate.
 

1 more replies
Relevance 15.99%

IN Windows 7 my back up was working fine. I then upgraded to Windows 10. Due to heating problems with my laptop I downgraded back to Windows 7. Now I find that many systems are not working including the back. It just gives me this error.

I have already done the " restore default libraries" as suggested in some blogs but the problem persists. 
Can you help me this problems and the other issues of programmes not updating automatically. 
thanks 
Sanjay
 

More replies
Relevance 15.99%

   Dear Team
       I have windows 2012 R2 domain server. It is connected domain perfectly windows 7 pro .
      But if i connected domain windows 7 ultimate . It is showing DNS error. I am joining same process win7 pro.
      please help me how to join windows 7 ultimate in domain.

   Note. I give my client PC windows 7 ultimate network proper DNS.

More replies
Relevance 15.99%

I cannot figure out how to get all of my email stores moved from my old PC (Windows Vista/Windows Mail) to my new PC (Windows 7/Outlook 2013). Is there a way to successfully do this or do I need to give up?? When trying to use the export function for messages in windows mail it comes up with an error message to say 'The export could not be performed. An error accured while initializing MAPI.' All my email accounts are POP3. I did find the email stores and transfered them manually to the new PC but I opened them on the new PC in outlook then only a small fraction of emails was there and they were all jumbled up and my folder structure did not transfer. Can this transfer be done or not? Hope to get some useful answer. Cheers, Torsten.

More replies
Relevance 15.99%

I cannot figure out how to get all of my email stores moved from my old PC (Windows Vista/Windows Mail) to my new PC (Windows 7/Outlook 2013). Is there a way to successfully do this or do I need to give up?? When trying to use the export function for messages in windows mail it comes up with an error message to say 'The export could not be performed. An error accured while initializing MAPI.' All my email accounts are POP3. I did find the email stores and transfered them manually to the new PC but I opened them on the new PC in outlook then only a small fraction of emails was there and they were all jumbled up and my folder structure did not transfer. Can this transfer be done or not? Hope to get some useful answer. Cheers, Torsten.

More replies
Relevance 15.99%

Hey all,

Firstly I hope i have posted this in the right forum.

As the name states I can not use any of my windows security I know this is because of a fake anti virus i had at one point, I also can't install any other virus protection or firewalls onto my computer.

I'm assuming this has to do with what the virus has done with my computers registry, correct me if I'm wrong.

I want to restore my registry back to its default I have tried the reg restore /? command in cmd but it comes up with (see attached picture) and am not sure what this means or for the next step for me to take to continue the command.

Is there any down side to restoring my registry to its default as well?
 

Answer:Unable to use windows fire wall or windows update all windows security disabled..

16 more replies
Relevance 15.99%

tried loading using the all apps icon, then tried tried signing in to Microsoft xbox and accessing solitaire via that games menu. both methods result in the page saying that the game is loading,but after 10 minutes, still no game has appeared.

More replies
Relevance 15.99%

I implement Point of Sale systems. Currently our POS network may have a mix of Windows platforms, mostly 7 Pro and 8.1. Windows updates need to be installed, but we handle this process manually, with the setting "download updates but let me choose
when to install them". I'm looking for a way that our clients can sit down periodically on the main computer and install updates (during non-business hours), and also push them out to the other computers in the workgroup (which may be on a different OS).
Is this possible?

More replies
Relevance 15.99%

There are many programs that are using a shared file on the server from clients from XP to Windows 10. From time to time it seems like there is a network outage and the handle to the file is broken and the file
cannot be read or updated. It seems more prevalent on a Windows 2012 server but may have happened from time to time on 2008 & 2008 R2. However there are not any network problems so it just leaves the server & Client

I have searched for possible resolutions including:-


Turning  off the Cache for the share

Disabling the network adapter power setting to allow windows to put the device to sleep.

Disabling  Antivirus/configuring it to ignore folders for on access scanning

Disabling SMB  Signing

Configuring the  clients DWORD registry value SilentForcedAutoReconnect=1 in HKEY_LOCAL_MACHINE\Software\Microsoft\CurrentVersion\NetCache

Setting the "NET CONFIG SERVER /AUTODISCONNECT:-1" to not drop client
connections


The last bit of trouble shooting that I can think of is to disable SMB2 and SMB3 as that does a lot of caching and batching of packets which could also be the cause of the problem.

I have looked at
http://support.microsoft.com/kb/2696547/en-us

I have disabled SMB2&3 on the server as that is very straight forward.
When I get to the section about disabling SMB2 on the client the command fails.


sc config
lanmanworksta... Read more

Answer:Disabling SMB2 and SMB3 Client from Windows Vista, Windows 7 and Windows 8.

Roger

I realise that I actually typed "Browser" not "bowser" in the command.
I'm testing on a non-internet connected network so I hadn't copied and pasted the command from the test computer.
The command was
    sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi

I actually typed
    sc.exe config lanmanworkstation depend= browser/mrxsmb10/nsi


If found a
post where in the comments someone did the same as me!

Thanks once again for your time taken in responding.

Rob

8 more replies
Relevance 15.99%

How to install Windows 10 on a Dell OptiPlex 3040 MT with Windows 7 Pro preinstalled (includes Windows 10 Pro) ?
The system comes with a DVD labeled Windows 10 Pro x64 and reading "to be used on a system with an OS installed and to be used only to reinstall the operating system".

More replies
Relevance 15.99%

I upgraded my computer to Windows 10 recently.But after that,whenever I log in,files keep getting deleted.One day,I saved my assignments onto the computer.The next day,BAM it's gone,followed by other apps like spotify etc.It's really frustrating as I have to keep redownloading everything,only to find that it's deleted the next day.On that of that,I don't have a windows store and windows widgets like timer etc.I desperately need help as it's been going on for the past few days and I have tons of assignments to submit soon.

More replies
Relevance 15.99%