Computer Support Forum

Epson Colour 460

Question: Epson Colour 460

I have the above printer , and now it refyses to work .I'm using XPpro,tried everything,troubleshooter ,manually loading the printer with xp , uninstalling it reinstalling it , unplugging it , switching it off switching it back on , checking the leads ( kicking it , not quite but close ) downloading new drivers that somehow won't load ? Next place for it is the bin , unless you can help me of course , it won't even print a test page . No new software installed recently so now i'm stuck HELP

Relevance 100%
Preferred Solution: Epson Colour 460

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Epson Colour 460

have you tried using the Epson Printer installation Disk provided with the Printer, and chose the Windows 2000 option install? May give it a KICK start ;)

8 more replies
Relevance 65.6%

I have the Epson 880 and I am very pleased with it, however, I do print holiday photographs quite often, would I notice much difference with the R200 please?

Answer:Epson colour 880 v Epson Photo R200

hi badgermansix i use the 880 &print alot of pics,my friend has the 900 & i cant visibly see any difference,apart from the price of the cartridges.the 200 i believe can print onto discs but apart from that i would stick to the 880 with cartridge prices as low £1.50 for a colour i will stay with my 880.

10 more replies
Relevance 59.04%
Question: Epson colour 440

I got brand new printer gave m e but no one could find driver disk so i downloaded it but my printer just prints lines of non sense and in all different colours but wont print it wont print a word pad doc and wont print from dos either plz help very confuzed beginner
 

Answer:Epson colour 440

Sounds like you downloaded the wrong driver.

On their Windows driver page (assuming you're using Windows) there are several options.

If you're using WinXP, the only WinXP applicable file listed is actually a Monitor utility, but it does not state that it includes the driver (never safe to assume anything).

But if you are using WinXP, it already has many printer drivers included.

Try this:

Right-click My Computer
Select Manage option
Select Device Manager
In right pane, expand [+] Printers
Select your new printer
Uninstall the printer
Reboot your system and see if WinXP automatically loads the driver
This means WinXP already had the correct driver.

If this does not work... Is your printer "new" to you (used from someone else)?

If it is actually store-bought new, it should still be under warranty. Go through the store or Epson and get the CD you are missing.
 

3 more replies
Relevance 59.04%

Epson 440 will not print in colour...Have changed cartridge and cleaned heads several times but no difference...Colour box is ticked on print options..Any tips would help as I was thinking it was maybe blocked jets.
 

Answer:Epson 440 no colour

How old is the printer? Are the heads part of the color cartridge, or separate? If they're separate, maybe they're worn out and need to be replaced.

Here's part of the Epson FAQs:

Q: Why are the colors in my image incorrect?

A: Due to the fact that your monitor and printer use different
technologies to represent colors, your printed colors cannot exactly
match the colors you see on your monitor screen. Check the ink
setting in the printer driver and make sure it is set to Color, not
Black. Make sure the Media Type setting matches the paper or media
loaded. Let the printer driver automatically select other settings
for the best quality. Check to see that the paper is loaded
correctly by removing the paper and reloading it, making sure that
the printable side is face up. You can also adjust various color
settings in your printer driver and possibly your application
software to correct color problems in your image. Also, the print
head nozzles may be clogged. From the Utility section found in the
EPSON printer driver, print a nozzle check and examine the printed
dot pattern. Each staggered horizontal and straight vertical line
should be complete, with no gaps in the dot pattern. If there are
gaps in the dot pattern, clean the print heads by running the head
cleaning utility in the printer driver. Then, print another nozzle
check. A nozzle check and head cleaning must be performed as a
cycle in order for the cleaning cycles to work. If there are still
gaps in th... Read more

2 more replies
Relevance 58.63%

I bought a new pc winxp o/s.My epson printer works ok but the ink status (full/empty) indicator doesn't display.I emailed epson but they tell me there is no driver for this model and the best thing to do is to buy another printer \cheeky so***s) any ideas anyone?

Answer:Epson Stylus colour 600

If the printer works why bother you will know when it's out of ink, by the way it comes out of the printer. We did not always have monitors

3 more replies
Relevance 58.63%

I've got an Epson Stylus SX130 which can print ok in during a nozzle check under the maintenance tab but when I come to print a document is just prints in various shades of black.
I've done numerous nozzle and head cleans and replaced all cartridges but to no avail.
Any ideas?
Many thanks,
S.

Answer:Epson colour problem

Check your Printing Preferences (right click on your printer) to make sure you haven't got GRAYSCALE selected for printing.

2 more replies
Relevance 58.63%
Relevance 58.63%

My old wonderful Stylus Photo 700 seems finally to have bitten the dust and I am waiting to hear if it can be repaired. If not the dealer recommends the Epson Stylus C88 as a replacement. As I use an old Dan Computer with Pentium 11 and do not have USB's as their is a IRQ conflict when I try to use them. My operating system is Windows ME.My query is this. I use 'other make' inks as I am an OAP but looking at the firm's that do these I cannot find the C88 inks listed anywhere. (Except in the USA). Does anyone know where these inks can be obtained in the UK for this printer, or anything about it?

Answer:Epson Colour Stylus C88

click hereIn UK.

2 more replies
Relevance 58.63%
Relevance 58.63%

I have recently started to get problems with my C62, the last three attempts have come outmostly green with yellow as the only other colour,could anyone help please.thanks

Answer:Epson C62 colour problems

Have you tried the epson print head cleaning utility, how olds the colour Cartridge ? if you need new ink try here click here

4 more replies
Relevance 58.63%

Can someone advise on the best programme to use for printing from a Digital Camera using the above printer or should I go for a more up market printer?

Answer:Epson Stylus COLOUR 680

Print quality is limited by the quality of the camera and the printer. But some software can hep - what is it that you want to do? Simply print occasional photos or print pages or thumbnails or what?Epson's photquicker is a good basic program as is irfanview.

10 more replies
Relevance 58.63%

When i try printing on my epson,i get the following message in the internet explorer script window:line:1174char: 1 error: unspecified errorcode: 0url: res://c:\windows\system\shdoclc.dll/previe w.dlgI have'nt used my printer for a couple of months & prior to that i formatted my system which is win98.Any advice

Answer:epson colour printer

Did you re-install the printer driver after formatting? If so try removing the driver using add\remove in control panel, and re-installing.

6 more replies
Relevance 58.63%

five days out of warranty my epson 580 colour printer has spat the dummy and refuses to work - unfortunately epson down under do not work sat/sun and I NEED it NOW - all simple checks have been done and rechecked - it has been re=iinstalled and still the same msg - an unknown error has occured unplug your printer and call a tech - poo

any ideas guys and girls
 

More replies
Relevance 58.63%

Ive just installed new ink Cartridges in my printer but all i get is plain paper no print,ive tried the print haed cleaner but no joy any ideas ??

Answer:Epson stylus colour 600

Make sure you have removed the tape on the top of cartidge, and sometimes it can take two or three cleaning cycles for the 600 to pull ink through.

10 more replies
Relevance 57.81%

I'm looking for a driver for this printer.
It's compatible with Windows 7 64 bit.
Which driver do I need and how do I install it on my machine?
I've tried a windows 2000 driver but it won't install.

Answer:Epson Stylus Colour 760 Driver?

Epson Stylus COLOR 760, FAQ - Technical Support - Epson America, Inc.

8 more replies
Relevance 57.81%

Please - How do I print (in colour) on an Epson jet printer 660?

It comes out misty black & white only.

THIS IS FOR PHOTO PRINTING!

THANK YOU - PLEASE ADVISE!
 

Answer:How do I print (in colour) on an Epson jet printer 660?

 

3 more replies
Relevance 57.81%

Recently my Epson stylus 760 colour packed up. It was both very good and reliable. I am looking for something of equal quality / reliability.Any suggestions pleaseThanks

Answer:replacement for Epson stylus760 colour

Canon Pixma iP1800/EN click here = £27.85 delivered. Also from Dixons search for 235748. G

10 more replies
Relevance 57.81%

Trying to use epson stylus printer with windows xp. It prints but not true colour or black. Can I make it compatitable with 98 or make a seperate partitiion and load it on that.

Answer:epson stylus 300 will not print colour under xp

XP should already include the driver for this printer if it's a straightforward Epson Stylus 300 (there are at least two other "300" models). See:click here

3 more replies
Relevance 57.81%

I am using an Epson 2100 via a network connection and am getting a pink/purplish tinge to all the grey colours; I have also added a separate Epson Driver to my pc and still get the same results.The colour on my Monitor is very accurate, I can print the same image to a networked Laser Printer and the colours are spot on!I have tried changing the settings to ICI/sRGB and have also manually altered the colour sliders but still get the same result.I am using genuine Epson Ink; it dosesn't make any difference which type of paper I use either?Has anyone any idea what I can try next?Many thanks

Answer:Colour problems with Epson 2100

Have u tried cleaning the heads

2 more replies
Relevance 57.81%

Hi I have an Epson Photo R1900, it has worked perfectly for a long time, this week I cant seem to make it print correctly, heres some info
- monitor calibrated with Spyder 2
- heads clean and print pattern perfectly
- Win 7 64
- P-Shop CS5
- Epson Premium Semigloss paper

Here- http://www.paulbrooker.com/comp.htm ? are 2 images that show settings and result in the previewer, which is pretty much how it prints...

Would really appreciate any help
Paul
 

More replies
Relevance 57.81%

I've managed to alter the default settings to enable use of new inks, but how do I save these for future use please. The printer seems only to be able to use the new settings once then revert to defaults ?

Answer:epson s22 colour settings saving

Hi there ... Some more Information is needed .. Are you using new ink or refills .. Also do you mean after you Reset the chip ? .. Or are you using Advanced settings

5 more replies
Relevance 57.81%

Yesterday I tried to install new ink cartridges into my printer. ( EPSOM 880 Colour. ) When I powered off the printer the ink carriers stayed to the right when they are supposed to go to the left of the interior to allow access to the housings for the cartridges. The only way I found to get around this was to start to print something, then power off the printer whilst it was some way alomg the printing route. After changing the cartridges with new ones I resumed printing. The ink cartridge indicators now still show both empty and printing is erratic. The test printouts indicated that the heads needed to be cleaned, which I did OK, but when printing text the spacer lines are almost blending together. D I need to reinstall the software and install as a "new" printer?

Answer:Yet another printer problem......EPSON 880 Colour.

click hereI have been reading reviews about the 880, and a lot of people are finding, that after about six months the print heads get clogged, and the only way forward is to take it into an Epson dealer..The price of printers now a days, maybe better off getting a new one?...

5 more replies
Relevance 57.81%

This is a last chance to save my faithful Epson 600 printer which I've always managed to fix but now all three red warning lights alongwith the power light are coming on when the printer is switched on. These lights refer to the 2 cartridges and paper feed. Has anyone had this problem and rectified it? The printer was originally a retiral gift and I'm reluctant to part with it if there is a glimmer of hope!

Answer:Epson Stylus Colour 600 Printer

Download and install this service utility.Once installed use it to reset the counters.click hereThis could relate to the built in feature that asks you with out asking to change the ink pad. Make sure you exit the Epson Printers Monitor before installing...

10 more replies
Relevance 57.81%

My printer has thrown a wobbler(technical term).
1 picture of came out with face yellow probably the background too it was'nt easy to tell.
Looked at utility all colours were very low.
2 replaced colour cartridge face looks better but now has horizontal lines about 3/8" apart.
3 did head alignment & nozzle cleaning utilities still the same.
4 It dos'nt print b/w from word file either.

Any ideas please.

Howard
 

Answer:Epson Colour Stylus 880 advice please

9 more replies
Relevance 57.81%

I changed the black cartridge in my printer and now I get incomplete text (faint and only top half of text). I've tried everything the manual says - and some. Any ideas please?
 

Answer:Epson Stylus 660 Colour won't print!

stepheno
It may end being just a defective cartridge, however you could try these things:
1) Remove cartridge inspect contacts for residue from covering material. Take Swab (q-tip) and alcohol clean contacts thoroughly.
2) Clean contacts on printer same way.
3) Make sure dust and/or coagulated ink is not present on ink nozzles.
4) Reseat cartridge and run printer utility to clean nozzles and run calibration/test page.
If all the above fails return the cartridge as defective and get a new Epson cartridge for your printer.
Dave
 

3 more replies
Relevance 57.81%
Relevance 57.4%

HiMy epson stylus colour 440 printer worked fine with XP home.I bought a new pc and parallel port to USB cable for the epson stylus 440. When I press print it sits in the print queue and fails to print. An odd time it will print.Using xp pro and xp epson stylus colour 440 driver. Note: XP PRO advises that the XP Windows driver for the printer is not the most up to date driver. Yet it works okay with xp home.Can anyone offer any help or advice please?Thanks in advance.

Answer:Parallel to Usb Epson Stylus Colour 440 problem?

So whats it on now Vista ? if so look on the Epson Site for Vista drivers or go to the printer folder choose Add Printer then choose from list of printers

3 more replies
Relevance 57.4%

I acquired the Epson Printer quite some time ago and use it mainly for newsletters and correspondence for a Residents Association. It has worked very well until recently but now the cyan cartridge is not working properly. When I print a test pattern all colours including black print evenly except the cyan which has many "missing" segments in the printed pattern. The instruction book says clean the nozzles through 'Utilities' but many attempts at doing this has shown no improvement. It looks as if some of the cyan nozzles may be really blocked and I wonder if there is anything I can do to clean them. Incidentally I have tried a brand new Epson Cartridge and made sure the paper is correct etc. I do not want to have to send this printer for repair unless it is absolutely necessary (I can't see how to get to the printer heads myself) because it would probably cost an arm and a leg to have it stripped and cleaned. On the other hand I have new cartridges which I have just spent about £90 on!

Answer:Epson Stylus Colour 3000 printer

Can you confirm that this is an Epson Stylus Colour 3000 printer. I can't find any reference to this printer, even on the Epson site? Alternatively, tell us the ink cartridge numbers.

3 more replies
Relevance 57.4%

I have changed all the colour cartridges, done a nozzle check and head clean but the yellow is only printing in bands. HAs anyone any idea how I can solve this problem?
Thanks
 

Answer:Epson SX515W Colour printing problem

You didn't say which Windows version (XP, Vista, 7, 8) and bit version (32-bit, 64-bit) your computer is running.

Here is the support site for the Epson Stylus SX515W All-In-One.

---------------------------------------------------------
 

2 more replies
Relevance 57.4%

my epson printer has started to print very fine blue lines across my photograps when in superfine 1440 dpi, but when in 720 dpi or lower its fine. I have changed printer cartridges, printer cables and reinstalled drivers, I have even tried it on my old macintosh 5400 using the serial cable and the result is the same fine blue lines across the photograph. can anyone help please as 720 dpi is not as good for photographs, and the epson 600 is handy for pc's and my old mac.

Answer:epson stylus colour 600 printout problems

Have you tried going into the printer properties and doing either a clean or a deep clean ?

2 more replies
Relevance 57.4%

Hi all

I have owned my Epson R300 since January and have done a lot of colour printing with it since. I have only ever used genuine cartridges in it and up until recently haven't had any problems. A few days ago I tried to print something, and it came out a sickly greeney-blue colour. I did a nozzle check and discovered that neither of the magentas was printing. I had only changed the cartridge about 3 weeks before hand, and when I checked the level of ink, every cartridge was still showing above 75% ink left. I did several nozzle checks and cleans, and tried printing off images that were mainly pink. The occasional horizontal line of pink came out, but only about 1% of the image that should have been pink, came out pink. The rest came out yellow - I imagine that the pink that it should have been would be a mixutre of the yellow and magentas. I just bought a new set of cartridges reluctantly (they're so expensive, I hate having to change two when they should still be good for a lot more prints). I changed the two magentas, and on the nozzle check, they now come out, but the cyan is no longer coming out. Obviously it's a problem with my printer and not the cartridges. I have always changed the cartridges when the printer tells me to, which is usually all 6 at the same time, so I don't think I have done anything wrong there. I am loathe to swap out the cyan cartridge in case it fixes that problem, but stops another cartridge from working. I hate knowing tha... Read more

Answer:Epson R300 - colour problem with certain cartridges

7 more replies
Relevance 57.4%

Is anyone out there using an Epson Colour 580 inkjet printer with a PC running Windows XP as I have recently upgraded the operating system from W98 and cannot get the printer to work no matter which XP driver I download from the net.I keep getting vague error messages but no printing. It would be very helpful to know if it is possible to get the 580 running with XP before I waste any more time on a "wild goose chase"?Thanks.

Answer:Windows XP and Epson Stylus Colour 580 Printer

Don't know off the top of my head, but I suspect the Epson site will tell you - or indeed the MS site - I think the XP compatability lists are still there.

5 more replies
Relevance 57.4%

i have tried 3 epson printers but the problem is the same it prints all colour but no black. i have also changed the lead to it but with no luck. i have put in a new black cartridge in also. please can you help. tp

Answer:epson printer prints colour but not black

Hi. I'm no expert at this but when I have had a problem with my Epson printer I have uninstalled it and reinstalled it and it has seemed to clear any of my problems

2 more replies
Relevance 57.4%

When scanning colour photos on my Epson 1250, it seems to enhance any blue in the colours, so the final scan is not quite accurate. Is it possible to correct this, and if so, how can I change this in the settings? Also, if it can be changed, is it possible to easily revert to the default settings?Any advice greatly appreciated.

Answer:Epson 1250 scanner, colour problem

Try here click here

2 more replies
Relevance 57.4%

Windows xpPro and Epson Stylus sx200,How can I check whether or not I have the correct colour profile for these two, I have been printing blue tinted pictures, even with new ink.tia

Answer:Colour Profile for winxp pro and epson sx200

^

10 more replies
Relevance 57.4%

when I try to print anything from my epson stylus photo 900, I get a magneta horizontal line which is evenly spaced throught the document.I've tried nozzel cleaning, helped a little bit but came back as bad as before.I've tried realinement, but to no avail.I've tried uninstalling and reinstalling software and up-dating drivers.I've taken the cartridge out (colour one) and found that one of the magnenta section was swamped with ink, so cleared this with a pit of asorbment paper (toilet roll) and cleaned inside the casement bit. and made no difference.At this point I'm not sure weather this is a issue with the inkjet head and it's kackered or weather it's just a carridge problem?I ponder this because it started signs of the magneta line at the end of my last cartridge, and I changed to this one. Which has sat on my desk for a little bit, because I made a mistake of taking it out and replacing it when it was 1/3 full, but it did seem to work o.k at first.any suggestions or is my printer knackered?

Answer:epson dropping a colour line while printing help!

Still no joy, I'm half way through work that needs to be printed (without the lines)monday being my dead lineAnd really need to know weather I have to leg it out and get a new printer

5 more replies
Relevance 57.4%

I have twoo printers attached to my computer, an Epson Stylus 700 and an Epson Stylus 1160. The 1160 does not get used a lot. When I had to replace the black ink cartridge it would not print out although the colour one would. I have tried using the head cleaning facility several times but this has not cured the problem. In fact the ink indicator shows that I have used half of the black ink cartridge in cleaning! Is there anyway I can fix this problem myself? By dismantling the machine or anything else? I have sent Epson Customer Services a couple of E-mails on the subject but have not received a reply. Any help would be greatly appreciated.

Answer:Epson 1160 Stylus Colour Printer

I had the same problem (but with a 760). Thats the main problem with Epsons, that the heads don't come as part of the ink cartridge. You could try head cleaning solution (approx £10 for a colour and a black) from any inkjet site. Basically they are cartidges but with cleaning solution. I tried these and they didn't do anything at all. In the end, I was using soo much ink trying to fix the problem, I ended up buying a new printer (SP830)I don't know if this helps really

1 more replies
Relevance 57.4%

My old epson 600 stylus colour printer has started playing up. It refuses to print more than 12 lines of text. It then times out.Any one got any ideas or does it go in the bin?Bruz

Answer:Epson 600 stylus colour printer problem

Hi, bin it - have lots of fun with a new one, so cheap these days.Cheers

5 more replies
Relevance 57.4%

I have been using my 1250 scanner and its attachment for colour slide scanning. Some work great, but some end up with a mauve/blue cast to them, which was not on the original slide. 20-year-old Kodak slides seem to be the worse for this, while Agfa of same age are OK. Why does this happen? Do the settings have to be adjusted for slides? Or is it some layer in the original slide that is not visible to the eye, but is seen by the scanner? I am most perplexed!!

Answer:Epson 1250 - colour slide scanning.

Just getting this in My Postings, to find any responses (have same problem sometimes with Epson 1240U + attachment).

3 more replies
Relevance 57.4%

My friend has the above mentioned printer and has done very little colour printing since he bought it. He has also not printed any 'Black & White' photographs.Despite this, he has seen the colour cartridge indicator gradually go down, and now it has reached the 'Replace Cartridge' condition, and the printer will not even print in black text only.Does anyone have any thoughts on what the problem could be?Never having used an Epson Printer I'm somewhat at a loss to advise him.Thanx in advance.

Answer:Epson Stylus Colour 760 Cartridge problem.

Tell him to leave it switched off all the time until he needs it. If he goes a while without using it print out a small page once or twice a week. Not a expert but this model seems to use a lot of ink during auto setup when switching on.

10 more replies
Relevance 57.4%

When scanning slides with the attachment that comes with the 1250, it consistently fails to scan the whole area of the slide, cropping a bit from both length and breadth. Anyone know how to overcome this, please?

Answer:Epson 1250 colour slide scanning

I can't check the exact details as I have this scanner at work but find the options/configurations and uncheck the transparency/slide preview option.

2 more replies
Relevance 57.4%

I have two desktop computers, one running Vista Home Premium and the other running XP Home. These computers are wirelessly networked, with an Epson Stylus Colour 600 printer connected to the XP system. I can access shared files that are on the Vista computer from XP, but not the other way around. If I try to do this I get an error message stating that the folder isn't accessible, that I might not have permissions, and that there isn't enough server storage to process the request. My main concern, however, is that I can't acces the XP printer from Vista. It shows up in Network, but I can't connect to it; it says that the network name is unavailable. When I drag a file on to the printer, I get the message "Operation could not be completed (error 0x00000709). Make sure that you have typed the name correctly, and that the printer is connected to the network."

Does anybody have any soloutions to my problems?
 

Answer:Printing from Vista to Epson Stylus Colour 600 on XP

16 more replies
Relevance 57.4%

Do any of you geniuse's know if it's possible to get a replacement black print head for the above mentioned printer.The colour print out if great it's just that I think the black is past it's sell by date.I've sent an email to epson but judging by the posting in the consummer room i probably won't get a reply.

Answer:Epson Stylus colour 11s print head

Newuser2, the print head is listed by Epson here click here, and the top level page is here click here but it is likely to be very expensive.

3 more replies
Relevance 57.4%

When scanning slides with the attachment that comes with the 1250, it consistently fails to scan the whole area of the slide, cropping a bit from both length and breadth. Anyone know how to overcome this, please?

Answer:Epson 1250 colour slide scanning

:)

2 more replies
Relevance 57.4%

Hello everyone,I have had this printer since about 1999 without any problems until the last few weeks, so I dont think it ows me anything. On "Best" quality print setting it is fine but recently on normal print setting I am getting banding lines across the page. I have tried all the cleaning and nozzle set up a few times but it does not have any effect, does anyone have any suggestions as to what the problem might be and how to cure it?Pamy

Answer:Epson Stylus colour 600 printing problem

Have you tried running some cleaning cartridges. Look at 7dayshop for cheap ones 0.99p each.. It could be worth a try.

10 more replies
Relevance 57.4%

I am using Adobe Photoshop elements to print digital photographs to an Epson Stylus 950 colour printer.All printed output has a pronounced blue cast, and colours, especially wood browns are not rendered accurately.I have tried colour management on every option - nothing affects the output. My cartridges have not run out. (My monitor is a Sony Multiscan 210ES.Any ideas?

Answer:Colour print problems - Epson Stylus 950

I am not familiar with the Epson Photo printers, mine is a Stylus C80, but I also had serious colour problems. Some photos matched perfectly, whilst others with different predominant colours were way off. On my Printer Driver there is a check box for digital camera correction. In my case I solved the problems by experimenting with different options for Photoenhance Mode, which has different settings for people, nature, standard, and sepia. You could also try these monitor tests to check your monitor calibration:Monitor Tests: Display Calibration click here Monitor Response click here Screen Calibration click here (provided by Huggyg71)

5 more replies
Relevance 57.4%

Some information text on internet pages is in very light colours which are difficult to read when printed.Can the Stylus R220 be set to print black only - my old 890 could but I can't find a suitable command on the 220.

Answer:Set Epson Colour Stylus R220 to black only?

I've not used the Epson R220 myself, but taken from a previous posting on this site (in 2006) You have to select Advanced Settings and tick the "Greyscale" checkbox for printing in black ink only. Hope this helps.

2 more replies
Relevance 57.4%

Hi all, around xmas time I bought a new Epson 830 printer.I have been very pleased with the quality of photo's and all other printing. I now find that, when my colour cartridge has run out, it will not print plain black text, and when i click on print, it only comes up with a window telling me to replace my colour cartridge.I have been into settings, and changed them to print black ink only, but with just the same results.Has anyone else had this problem, or can anyone tell me how to sort it.Thanx in anticipation. Joe.

Answer:Epson 830 black text without colour cartridge.

HiI have had the same problem with Epsons before. The only way round is to replace the colour cartridge. Although you only want to print in Black Epson will not let you print if either cartridge is empty.

2 more replies
Relevance 56.58%

Trying to scan to file colour negs with Epson Perfection 1650 Photo scanner. On Auto it recognises the negs and (eventually - very slowly)scans the strip of 4. As I only want one of the strip I've tried to use the manual mode, hoping to select the single neg from the preview.However, it insists the document is a colour photo and I can't see any way to persuade it otherwise.Is there a way or does it not support colour negs in manual mode?I'm using XP with SP1.

Answer:Epson Perfn1650 Photo scanner -colour neg problem

More problems. I'm laboriously using auto mode and now that is playing up. It recognise some neg strips as colour negatives but every third one it see as a colour positive. If I switch off, disconnect the power then remove and replace the TPU connector when switching back on it correctly sees the strip as a clour negative.Frustrating is the politest word that comes to mind.

1 more replies
Relevance 56.58%

Anyone help to remind me how to replace a damaged cartridge before it's completely empty of ink?I've lost the original handbook for Epson Stylus Colour 600. I need to get the carriage to stop at the centre of its movement which happens automatically if the ink is empty.Thanks once again in anticipation!

Answer:Epson Stylus Colour 600 damaged cartridge removal

you should have a piece of software installed on your computer that came with the printer that allows you to change the cartridge. I think it is the one that allows you to select the print quality etc

5 more replies
Relevance 56.58%

Sometimes, and there seems to be no logic to it, my printer decides to try to print wider than the A4 paper loaded such that some 3/4 to 1" of the rh side is in effect off the paper and not printed.I am not fiddling with the printer setings between sites/web pages that do / or do not print correctly. Any ideasTaChris B

Answer:Epson stylus colour 760 misses rh side of page?

A lot of sites cause that to happen, ChrisBnSueR. Try copying and pasteing the text from the site into Word (or any word processor) then printing it.

2 more replies
Relevance 56.17%

Have been using compatible inks for years in our C62 printers with no problems.Just treated myself to an R300 because of the 6 inks and have been more than pleased particularly with the skin tones. Used up the original inks and now on my first set of compatible inks.My problem is that it now appears to be picking on the green on certain parts of the prints. ie certain parts of my wifes dark hair is tinged green. A friends dog which is grey the tips of the ears, eyebrows and around its nose is tinged green.It is not the original digital photos that is the problem because they print out perfect colours on my wifes C62.I thought about replacing just the cyan & light cyan cartridges with originals to see if this works. So my question is has anyone got an R200 or R300 (use same inks) and have exprience of this problem?Or has anyone any ideas how I can sort this out? I would like to keep using compatibles if possible. Thanks you..

Answer:Epson Stylus Photo R300 or R200 colour probs

try running a cleaning cycle.with click herethis does a great job and lets you choose between cleaning individual colours and also gives a thorough clean option which is stronger than the printers own.has other features too like freezer and so on.ps.its free.

10 more replies
Relevance 45.51%

Can anyone suggest a way to get the Microsoft Solitaire Collection colours back. Yesterday, all colour went and the cards just showed in yellow on a black ground. Asked Microsoft, but no help given. Am I the only person with this problem, or has someone
solved it?
Updated drivers for  Nvidia Graphics card.  Reset the Collection under 'Features' in Settings.
Nothing works yet.  Any ideas, anybody?

More replies
Relevance 45.51%

System 7 an elderly Epson scanner Dell colour laser
Copying a black document results in blue prints.which is getting it wrong-system ,scanner or printer?

Answer:W7_stand alone scanner colour laser prints docs in wrong colour

I had the same thing happen although it was an inkjet not a lazer. Re-installing the software fixed it in my case.

4 more replies
Relevance 45.51%

Hi there gurus.
My pc doesn?t show certain colour objects in Publisher 2007 and some on-line sites. Overall, the screen colour is very good. I know the fault is localised, because when I switch to Print Preview in Publisher it looks fine and I can see all the object colours. (I only lose the colour with objects, not text)
Also, when I send a copy of a Publisher page to my partner who is on the same PC, it looks fine on her screen.
I?ve tried going to Install/uninstall programs and run the Repair, but to no avail. The guys in my computer shop are clueless without seeing it. Anyone who can help solve this for me is a gem.
Cheers!
David

More replies
Relevance 45.1%

What's cheaper: colour laser with genuine ink or colour inkjet with compatible inks?

I'm happy to invest in buying a colour laser: but I can't find any refills for lasers
At least they don't seem to be widely available

So, my choice is: colour laser + genuine inks or colour inkjet + compatible inks

From what I know, side by side: laser's are cheaper
But, how about when compared to genuine laser ink to compatible colour inkjet inks?

I should stress that for me needs, I am not overly concerned if using compatibles doesn't give me perfect results - just close as possible is fine for me

What's more important probably is speed of print at highest quality

ANY feedback would be great

Thanks
OM
 

Answer:What's cheaper: colour laser with genuine ink or colour inkjet with ink compatibles?

Finding Compatible Remanufactured Color Toner cartridges can be dicey. While they may be available, the problem may end up being the company tht does the remanufaturing. It is also dependant upon the model printer you get. I have noticed that the savings on my Black Canon X-25 toner cartridge is only about $12 lower than the cost of a Factory original cartridge. There are sites that I would save up to $30 per cartridge, but part of this is eaten up by the shipping charges. For my toner cartridge, I am about 1/2 mile from the store that does nothing but ink and toner refill services, and their garauntee thier cartridges 100%. In 3 years I have only had to return one cartridge and it was an HP #17 Color cartridge.

Now per page printing cost on a laser is much cheaper than on an inkjet. Though the printer cost itself is usually much higher for a Laser. Personally I use the laser much more than than my Inkjet, but I do use the inkjet for all color printing. But then 95% of my printing is monochrome text.
 

1 more replies
Relevance 44.69%

Hi, I'm using the Aerolite theme with Aeroglass, and want a consistent colour for the borders. So I set accent colour from background 'off' and choose the colour. Fine so far.

Now that's ok if I log off and on.

But if I sleep or hibernate (not personally ) and then resume, the colour and setting are lost.

I noticed that on resuming, the border colour is present until the 'Please wait' screen appears, after which these settings are lost.

Any ideas? Thanks!

More replies
Relevance 43.87%

Hello.

I seriously need help with my PC. I've reinstalled Windows XP and Service Pack 2, and I can't chnge the Screen resolution or the colour quality. It sucks. The resolution stays at 800x600, the lowest possible, and the colour quality stays at 8 bit. I think I have a ATI 128 MB DDR Radeon 9800 Pro. I dunno whether thats a driver or what. And I also don't know my graphics card, or whether that will help at all.

I would swear at this point but I'm too young.

Oh but I'll use this instead

Has anyone got any help for me that I can understand. I'm 14 but I still can understand most computer talk.

Anyway thanks very much for reading all this crap and please try not to point out all my spelling mistakes.

Alex Jordan

Answer:[resolved]Help with resolution and colour and colour quality??.. anyone??

Heya, welcome to the forums


Okay, it has to do with your drivers. Go to ATI's website and find your driver.

Here's the link

http://ati.amd.com/support/drivers/xp/radeonx-xp.html

Please download and install both the Control Center as well as the Display driver. Then restart your computer and try to change the resolution.

Cheers!
-Facade

16 more replies
Relevance 43.87%

Hello friends,
I was just thinking that wouldn't it be great if we get more color options to change the background color on our Windows Phone devices than just black or white as we get on Windows 8.1 devices to customize background color along with tile colour?
Reply your views !

Answer:More colour options to change background colour

I personally like the black and white, but I saw a mockup of a dim tropical photo in place of the black and it looked quite beautiful.

3 more replies
Relevance 43.87%

Hi Allhope someone more knowledgable can advise - I recently purchased a Lexmark x500n multifunction colour laser printer - I had a big black print job to do excel and word - 2000 pages - i was shocked to see that - ok the black starter cartridge of 2500 pages was nearly empty- fair enough - but all three colour cartridges (1500 page size) were nearly all empty too - I hadn't done any colour printing but when i contacted the manuf they advised that the printer uses colour also to print black!! - it's getting returned to them - but do do all colour lasers do this - obviously this quadruples the costs of printing and has put my costing out of the window!! - any advice would be great - it's a network colour printer, with copier and scanner that I need - a fax would be great but not essential.thanks in advanceTrifly

Answer:COLOUR LASER - PRINTING BLACK USING COLOUR!!

That would pee me off no end. How in God's name can it use colour to create black when there's a black cartridge in there? A cheapo mono laser seems to be your ideal tool. I know nothing about colour laser printers, but is there an option anywhere in the settings to print using only the black cartridge? Does the printer still work if you take out the colour cartridge while printing only black text documents?

4 more replies
Relevance 43.87%

Help please...I do cartoons in Photoshop for magazines...how can I adjust my screen, so that what I see on the screen will match what is printed in my client's magazine? Thanks.click here

Answer:Screen colour to match magazine colour?

I found the easiest way to achieve this was to print the picture and then adjust my screen to match. Once you've adjusted the screen all future pictures which look too light or dark, on screen, can be adjusted to suit within your software.

8 more replies
Relevance 42.23%

I have found out that the wrong driver was installed. I have installed the right one but although it now prints OK in Black I am not getting any colour.I have looked at the properties and the colour box is ticked. The printer does not indicate a lack of colour ink.Can anyone help please?

Answer:No colour from Epsom 740 Colour printer

How long since it printed colour. Why is it you are just having to sort the drivers

10 more replies
Relevance 42.23%

I have found out that the wrong driver was installed. I have installed the right one but although it now prints OK in Black I am not getting any colour.I have looked at the properties and the colour box is ticked. The printer does not indicate a lack of colour ink.Can anyone help please?

Answer:No colour from Epsom 740 Colour printer

has it got new carts in it , and have you taken the protective tabs off of the bottom of the cartridge.not making anybody look stupid but it does happen

2 more replies
Relevance 40.59%

Since I was last on the forum I had problems with the computer continually blinking all the time, as if programme was running in background continually. I had installed Secunia PIS and believed that it may have caused the problem. I then had problem uninstalling Secuni and found that I was able to sort it out using “REGEDIT” in the Software section “user_software” and “machine_software”, click and deleted the programme.

The continual “blinking” saga is still there. But, at the same time I am having problems with printing any documents with the Epson C90, which would take at least three minutes to complete the spooling and printing function. I didn’t have this problem before. I spoke to Epson support and sadly they were no help, except to advise me to uninstall and reinstall the programme.

I thought that possibly my WORD programme could be part of the problem, which is WORD 2000 SR-1 that is fully updated to SR-3. I then uninstalled WORD and reinstalled WORD as per Microsoft Download site for software, and printing problem was still the same.

I also have an Epson TX110, I decided to install the TX110 and use it as the “default printer”, but the same printing problem existed. I then decided to uninstall all EPSON printers completely via “ADD/REMOVE”. The EPSON Software was listed under many components. I “REMOVED” each component, one at a time, but the following four components wouldn’t remove and kept on coming up with and ERROR messages stating: “Specific ... Read more

Answer:Epson components of Epson Printer Software Will not REMOVE

I still have the blinking computer saga, but I was able to ADD/REMOVE the four problematic programmes by doing this:

Click Control Panel – ADD/REMOVE

Programme won’t remove/uninstall and an ERROR appears stating “specific module not found” or any other form of ERROR Message that stops the component being uninstalled.

Steps (Before doing anything on each step, back up and restore):

(1) Go to Microsoft Uninstall Problem Trouble-shooter KB2438651 or later version, and RUN the “FIX IT” download, and if it doesn’t “FIX IT”, then do the following steps.

(2) Click START, go to RUN, type in REGEDIT and go to:
HKey_current_user-software and then find FOLDER and DELETE Folder.
Hkey_current_local_machine-software find FOLDER and DELETE folder.

(3) Go to Hkey_local_machine-software-microsoft-windows-current version, then click (+) for UNINSTALL, scroll down to programme-RIGHT CLICK-DELETE.
(Note: The programme or whatever you are trying to remove from ADD/REMOVE many not be listed under its NAME, then highlight the individual “registry keying information” one at a time and the NAME will be listed in the right column, then RIGHT CLICK and DELETE. Keep going down the “registry keying information”, highlighting each as you go find the name of the problematic programmes, and deleting.

(4) Go to C DRIVE –Program Files and click to see if any other... Read more

1 more replies
Relevance 40.59%

Hello!

Request recommendation between Epson Stylus TX 510 FN or Epson L550 Ink Tank Printer -- I had bought the Epson Stylus 510 FN Multifunction Inkjet Printer in January 2013 and have been facing different problems with at least 5 service requests for different errors/problems. While the local Epson service team has been very helpful and supportive, I am now fed up with the unit and requested Epson for a new replacement or an option to go for a higher-end model (a model upgrade, with the price differential to be borne from my side, of course). The Epson regional head promised a replacement of the unit as the minimum.

I'm waiting to hear from them (they promised to revert in the next day or two), though the minimum they have promised is that they are ready/willing to replace the error-prone Espon Stylus TX 510 FN that I have with a new unit (i.e., same model). If the company HQ does agree for a model upgrade (with the price differential to be borne by me), should I go for the Ink Tank system-based L550 (Fax and Wireless/Ethernet are a must). I see that the Ink Tank systems have been introduced recently. What's their performance like?

Appreciate any feedback on the L550 specifically please. Is the bad experience with the Stylus TX 510 FN (in my case) unusual, or, is the model (Stylus TX 510 FN) having inherent glitches/flaws itself? Finally, should I stick with the Stylus TX 510 FN (i.e., the new Stylus 510FN unit replacement by the company is promised as... Read more

Answer:Epson Stylus TX 510 FN or Epson L550 Ink Tank Printer - which one?

Welcome to the forum indieprint In all likely hood the best answer I think you'll receive would be to compare two reviews and look for features that you will require.

The problem with printers is they are especially electrically and mechanically complex even in the computing world and the reliability can be very random when you have so many moving parts, also there is the work load, maintenance schedule, toner and ink quality, paper quality, computer stability, multiple experience levels. You could read ten reviews of the same printer and each would have a different experience so even if your lucky enough to receive a reply from a forum member with his experience of those two exact models I wouldn't use that as the basis for a new purchase.

So I would read as many respected technology reviews and also as many consumer reviews from printing suppliers and of course take into account you ink running costs.

Again welcome to the forum and I hope you get a more helpful reply.
 

2 more replies
Relevance 40.59%

Since I was last on the forum I had problems with the computer continually blinking all the time, as if programme was running in background continually. I had installed Secunia PIS and believed that it may have caused the problem. I then had problem uninstalling Secuni and found that I was able to sort it out using “REGEDIT” in the Software section “user_software” and “machine_software”, click and deleted the programme.

The continual “blinking” saga is still there. But, at the same time I am having problems with printing any documents with the Epson C90, which would take at least three minutes to complete the spooling and printing function. I didn’t have this problem before. I spoke to Epson support and sadly they were no help, except to advise me to uninstall and reinstall the programme.

I thought that possibly my WORD programme could be part of the problem, which is WORD 2000 SR-1 that is fully updated to SR-3. I then uninstalled WORD and reinstalled WORD as per Microsoft Download site for software, and printing problem was still the same.

I also have an Epson TX110, I decided to install the TX110 and use it as the “default printer”, but the same printing problem existed. I then decided to uninstall all EPSON printers completely via “ADD/REMOVE”. The EPSON Software was listed under many components. I “REMOVED” each component, one at a time, but the following four components wouldn’t remove an... Read more

Answer:Epson components of Epson Printer Software Will not REMOVE

I have taken further steps from many answers found on the Google search engine.

(1) I ran Microsoft fix-it on uninstalling problems,and I fixed one EPSON item that wasn't neither of the components that are still listed on ADD/REMOVE.

(2) I went REGEDIT Hkey-Local-Machine-Software-microsoft windonw- current version-uninstall and scrolled down to those EPSON components, and hit the DELETE button.

(3) I then went to C Drive-Programme Files and clicked on three EPSON files that were still listed and deleted them.

I assumed after all of that it would remove all in total, but those entries are still listed on the ADD/REMOVE population. Any idea how to delete these, or even if they are there and it appears that all EPSON components have been DELETED, would it be okay to download the TX110 printer again?

Thanks and regards

2 more replies
Relevance 40.59%

The Epson Perfection Scanner 1250 which is installed on my PC with Windows XP SP2, used to work but no longer does. I have re-installed the scanner software from the CD supplied with the scanner, but when I try and use it I get a message : Epson Twain 5 Scanner Model not supported by Epson Twain. Any suggestions?
Will
 

Answer:Solved: Epson Perfection 1250 & Epson Twain %

I spoke to Epson. They told me to download a new driver. Shouldn't be a problem, but first I have to install Winzip. I think it is best to regard the problem as Solved. Will
 

1 more replies
Relevance 39.77%

Cannot start new Epson V350 scanner. XP says "EpsonScan cannot be started." A possible pointer to the problem is the fact that XP Device Manager window is blank despite four added hardware peripherals. Any help would be appreciated.Zil Doggo

Answer:New Epson V350, XP says "Epson scan cannot be star

Epson hardware can be very particular to install. Do the following[assuming you did not do it in the first place] Come off line and close down your A/V protection and fire wall. Remove the epson installation. Restart the machine Re install. If you use a photo editor see if that will detect that particular TWAIN device .Come back with the results

3 more replies
Relevance 38.13%

I recently bought some ink catridges from 7-dayshop.com for my Epson 830 Photoprinter.These have been excellent (and cheap!), but I notice that when fitting a new cartridge a message appears with words to the effect that 'this is not an Epson replacent and may not give correct colours etc - do you want to continue ?'How does the printer recognise that this is not the 'Real Thing' ?

Answer:Epson 830 printer - Non Epson Cartridges

Because on the cart there is a chip now, on real epson ones it tells the printer, wht other printers its been in when it was made, exactly how much ink is left etc etc etc.now with the compatibles they cant do this as the chip information is copyrighted by epson. Stalker

2 more replies
Relevance 38.13%

Hi,I have an Epson 900 inkjet printer.The ink cartridges are running low so I need to buy some more.Should I buy official Epson ink carts or other brands epson compatable ink carts?I want the BEST quality that my printer can produce as I use it a lot for photo printing.Many thanks,Jordan

Answer:Epson Inkjet carts - Epson or "other" ?

The only problem you might find with compatibles in my experience is that the heads need cleaning more often. If you do a lot of printing, that shouldn't be problem. The cost savings are significant. I buy Jettec cartridges from Westlakes for my C80 which are £7 for colour and £14 for black. Print quality is the same. Choice Stationery are cheaper still.

5 more replies
Relevance 38.13%

Hi I am hoping that some one can help solve this problem for me we have just upgraded our computer and it has windows 7 as the OS we used XP previously.

The printer / scanner works fineas a printer however my problem is that the scanner part will only work with windows fax scan, I used to scan using epson scan on the old computer and I find this much more flexable than the windows fax scan. however it will not run on the new computer. I have down loaded the 64 bit driver (as we are using windows 7 64 bit) and installed it but when I try to start epson scan I get " epson scan cannot be started" " try trouble shooting" which I have done and have set the compatibility settings to use XP service pack 3 and run as administrator. And this does not help.

Can anyone offer some suggestions how I may get this to work and also explain the solution in step by step process as i only have a basic knowledge when it comes to computers.

Thanks
Jason

Answer:Epson cx3900 and epson scan

You can try some freeware graphics programs that have scan support such as
http://xnview.com/en/index.html
and
http://www.irfanview.com/

3 more replies
Relevance 38.13%

So I recently replaced my ageing printer with an Epson XP-432 and my O/S is Windows 7, I got it up and running and software installed all ok.
Now I'm trying to establsh an issue with the Epson Scan software but for some or known reason it's not launching, I've tried re-installing the software but no change.
Has anyone else had the same issue?
Thanks
Rob

More replies
Relevance 35.26%

my family have bought me an epson CX3200 all in one machine for my birthday,i have an epson C42UX that it will replace, could you tell me please do i have to remove all the existing epson software that i have on my pc when i remove my old printer before installing my new all in one. regards joel.

Answer:one epson printer for epson all in one

No, leave it where it is. Instal the new one and it will join the other. After install and putting the new as default click Printers and Faxes from the start menu and see them side by side. Any bother and you can click back to the old one.

4 more replies
Relevance 31.57%

Hi,

I know some basic stuff about computers, but I don't know how to fix this problem.

I have Windows XP. Firstly, the computer started running slower than usual for a while (a few weeks), then one day when I started the computer up, a screen came up in the DOS bit at the start asking me what mode I wanted to start in as there was a problem. I selected the option (and Im paraphrasing here) 'The last good configuration' as it seemed best. From then on, the colour went to 4 bit, and an 800x600 resolution. I can't change these settings as I normally would, as there are no other options available. I can use the computer fairly normally, except the awful colour and res. However, if the screensaver comes on, and I re-activate the screen, it will be totally messed up - the edges puffed out like a pincushion setting, black and white, lines travelling down the screen and flickering, sometimes going totally black then coming back again.

My housemate started the computer up and somehow got the original DOS screen back asking which mode to start in - he selected 'safe mode' and the colour was then good - except the internet then wouldn't connect. (I have broadband so it's normally automatic - I don't know how to connect it manually)

This is my brother's computer, so I don't know a lot about it - programs and so on - he's un-contactable at the moment and will be for a couple of months... I'd greatly appreciate any he... Read more

Answer:4 bit colour - why?

to connect to the internet in safe mode you have to select safe mode with networking

But sorry thats all I can offer at the moment
 

3 more replies
Relevance 31.57%
Question: colour

i just got another 512 ram today and stuck i in and i also reset my cmos as it was comeing up with bad checksum error when my pc booted. i then started up my pc and all the wrightin on the start up was yellow . it continued to loads windows xp and everything was in a shade of yellow so i thought i must of knocked something while i was putting in my ram. i shut my pc down and checked everything and restarted my pc but now everything is in a shade of red, i restarted my pc again but it still stays red. never known this happining before anyone got a clue to whats wrong

Answer:colour

i found the problem the dvi adapter had a few pinns missing changed it with another and now its fine

1 more replies
Relevance 31.57%
Question: Colour in win '98

I just recently (Yesterday) reinstalled my friends windows '98 OS, and now he can only get 16 bit colour so a lot of web pages are appearing in odd colours. Any ideas on how to resolve this problem????Thanks in advanceJason

Answer:Colour in win '98

First check in Control Panel/display to make sure the color is set correctly in there. If it is look in System/Device Manager for any conflict on his Graphics card, if there is look at the troubleshooting tips.

3 more replies
Relevance 31.57%

Just reinstalled Win98 and only have 16 colours. Have tried to find a driver thro DriverGuide, Microsoft, and other popular driver sites. I have a Liteon A1554NEL monitor. My windows disk would probably have a driver, but I don't know what to look for as its all abbreviated or code. Help would be appreciated.
 

Answer:Where has all the colour gone?

6 more replies
Relevance 31.57%

For images I use both Irfanview and XnView (both great apps) but I want to associate jpgs with Xnview for opening from Explorer. When I double click the photo I get a dialogue box telling me this is not a 32 bit application.

Sure enough - in Display, settings I do not have the choice of 32 bit colour. Can I rectify this?

Running W2K, 800 Celeron, 128 ram, S3 Trio 3D/2X Version 5.30.04 (8 mg shared ), CM1772FS Monitor 17" (New) set at 1024x768, No graphics card.

Many thanks in advance.

stepheno

ps I have installed the most up to date drivers for the monitor
 

Answer:How to get 32 bit colour?

8 more replies
Relevance 31.57%
Question: No colour

Hello,I am new to the Acer forum and this is my first post. Good to be here. I have an Acer pc which will be a year old next month. Recently, I have been able to print in black and white only. No colour. The test page from the printer is in colour. Device Manager does not tell me I need new drivers. Could there be another problem I have overlooked? Will welcome your input.Thanks.CarleySr. AcerPC,64 bitIntel i54440, Win 8.1ITB hard driveNon-touch Emsisoft Antimalware and Antivirus











Solved!
Go to Solution.

Answer:No colour

Thank you for getting back. The printer printed in colour from my Win 7 laptop.I tried some troubleshooting with Win 8 and the problem was corrected.I don't know what the problem was.Sorry, I should have checked the details. Anyway, it works. Thanks. 













View solution in original post

3 more replies
Relevance 31.57%

I like using "windguru" for forecasting the weather. Based in the Czech Republic, they're usually spot on which is more than I can say for the local effort.

Until recently I used Netscape 7.2 and subsequent to that Opera vers 11. These both colour coded the wind speeds and gusts and the expected temperatures; you know ranging from blue for cold to red for hot. For various reasons I have had to make use of IE-8. I can't get anything in colour. Temperatures and wind speeds are just black numerals on a white background. I've searched through IE's options but can't find any tweak to resolve this. The URL is www.windguru.cz and I'm running XP home. Can anyone help?

Thanks
 

More replies
Relevance 31.57%

runnin xp on hp 64 bit i only have 4 colours colours wont hold very hard to read the screen

Answer:colour very very low

Try re-installing the graphics driver for your PC or laptop model from the HP website:HP Drivers for UK models: http://www8.hp.com/uk/en/support-dr...HP Drivers for US models: http://www8.hp.com/us/en/support-dr...

2 more replies
Relevance 31.57%

Amber. Black. Cyan. Denim. E what?
What's your guess?

Answer:So what's the next Colour?

Emerald

2 more replies
Relevance 31.57%
Question: no colour

i have a lexmark 1270 all in one. i have recently got a new pc running winxp pro as i was on the old pc. my problem is that my printer no longer prints in colour only b&w. i know the printer is ok as ive tried it on another pc. is there a setting i need to change to allow colour printing..thanks in advance

Answer:no colour

Check the printer software is not set to print black only Setting ? Printers and Fax ? Right Click on the printer - Properties

7 more replies
Relevance 31.57%
Question: Colour Ink

Brother DCP 135C Yellow and Magneta colours not printing properly. Have done a clean few times and even used some cleaning fluid on heads but still no joy. Using CISS

Answer:Colour Ink

Have a look here for a solution link text.
I have found that using the clean ing facility repeatedly then leaving it to soak for an hour or two and repeating the operation often works.

3 more replies
Relevance 31.57%

Follow up to post on 20.01.04 requesting help to get a colour picture on my TV to watch movies from my computer.

Answer:'Gaz 25' or 'Ton' - TV-out, no colour (20.01.04)

in the original thread - not in a new one.

2 more replies