Computer Support Forum

BSOD when I restart inside of windows

Question: BSOD when I restart inside of windows

i7-7700kAsrock z270 Extreme432GB DDR4-2400 RamGTX 1080Ti FECorsair RM750xSamsung 960EVO 500GB M2Seagate barracuda 6tb x2Windows 10 64bit Build 15063
I've recently built, delided and overclocked my first pc. Everything was running just fine, until recently, I found out that pressing restart inside the windows start menu will shutdown windows, but will always freeze when it starts up again on the spinning dots. It freezes even if I overclock by 100Mhz. It freezes when I manually set multiplier to 45 even though its a 4.5Ghz cpu. The pc starts up just fine, runs just fine, and shuts down just fine. This only happens when I use the restart option inside windows or when an update causes it to restart itself.

I have my cpu OCed to 4.9Ghz at 140mV offset LLC3. Under load it's doing 1.28v. Temps never hit over 79C in p95. My OC is stable for 10 Hours p95 blend, 11 hours p95 small FFT, and an overnight memtest86. It has never crashed on me inside of windows.

Googling tells me that the cpu can't handle the overclock, but I'm passing these stress tests with flying colors. Not only that, but manually setting the cpu to 4.5Ghz results in the same lockup when restarting inside windows. This doesn't happen when I set multiplier to 44 or below, or on stock settings. I've tried updating BIOS from 1.4 to 2.0. I've tried reseating the cpu. Nothing works. Most times, it would restart, and get stuck on the spinning dots and do nothing. Sometimes, it would BSOD after getting stuck on the spinning dots (either WHEA uncorrectable or machine check exception) but the pc will hang at 0% as it's collecting an error report. As such, I'm not sure if my dump log is of any use, but I've attached it anyways. I would appreciate if anyone could help me out or share your past experiences if you have resolved this before on your pc.

DESKTOP-VIC-Mon_05_29_2017_200851_72.zip

Relevance 100%
Preferred Solution: BSOD when I restart inside of windows

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: BSOD when I restart inside of windows

That would be something for an overclocking forum. I think u will get better help there. But I was interested and analysed for u.

These are the results:


Code:
0x0000000A: IRQL_NOT_LESS_OR_EQUAL (16.05.2017 11:51:05) [Windows 10]

CAUSED BY: ntoskrnl

PROCESS: System

Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility


0x0000000A on an OCed System:

Code:
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x0A = add QPI/VTT voltage

read this: Common BSOD Error Code List for Overclocking - Overclock.net Community
The GPU driver also crashed very often:

Code:
2017-05-26T01 36:16.996 Display driver nvlddmkm stopped responding and has successfully recovered.: .
2017-05-26T01 36:16.997 Display driver nvlddmkm stopped responding and has successfully recovered.: .
2017-05-26T01 49:09.063 Display driver nvlddmkm stopped responding and has successfully recovered.: .
2017-05-26T01 49:09.063 Display driver nvlddmkm stopped responding and has successfully recovered.: .
2017-05-26T02 04:10.159 Display driver nvlddmkm stopped responding and has successfully recovered.: .
2017-05-26T02 04:10.159 Display driver nvlddmkm stopped responding and has successfully recovered.: .


But i cannot say if the driver crashes because of the overclocking or has another cause.

Last word from me: MSI Afterburner is known for causing bluescreens too.

0 more replies
Relevance 67.24%

I'm currently having a problem with my computer. It's been troublesome from the start.

Windows XP
AMD Athlon64 x 2 Dual 6400+
2x2 gb Supertalent RAM
nVidia GeForce 8800 GTS graphics card

I have disabled automatically restart after BSOD however it restarts anyways. Errors usually occur when I am running World of Warcraft.
 

Answer:BSOD quickly into restart - Many problems inside

Inside the 3 MiniDumps:




BugCheck 1000007F, {8, 80042000, 0, 0}
Probably caused by : Unknown_Image

BugCheck 1000007F, {8, bab38d70, 0, 0}
Probably caused by : Unknown_Image

BugCheck 1000007F, {8, bab38d70, 0, 0}
Probably caused by : Unknown_ImageClick to expand...

On World of Warcraft game
Try updating your Video and Sound drivers
Note: WOW seems to be the most faulted game seen on TechSpot, many members having issues with this one
 

3 more replies
Relevance 53.71%

my laptop took for everrr 2 restart, i had 2 hard restart, i dont know if this has a virus, or anything or not, but here's a HTJ log, thanks alot .

Logfile of HijackThis v1.99.1
Scan saved at 1:44:13 AM, on 7/7/2006
Platform: Windows 2000 SP3 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\system32\spoolsv.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\system32\regsvc.exe
C:\WINNT\system32\MSTask.exe
C:\WINNT\System32\WBEM\WinMgmt.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\Explorer.EXE
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\Program Files\D-Link AirPlus\AirPlus.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINNT\system32\wuauclt.exe
C:\Documents and Settings\Keith\Desktop\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://us.rd.yahoo.com/customize/ycomp/defaults/sb/*http://www.yahoo.com/search/ie.html
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://us.rd.yahoo.com/customize/ycomp/defaults/sp/*http://www.yahoo.com
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.yahoo.com
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchA... Read more

Answer:took for ever to restart, HJT log inside

16 more replies
Relevance 53.3%

so i took a nap with my pc on, came back to a bsod. i have it set to not restart when i get a bsod so i can write down the info , here it is.


DRIVER_IRQL_NOT_LESS_OR_EQUAL

stop 0x000000d1 (0x000000c , 0x0000002 , 0x0000001 , 0xb7e50ae7)



NDIS.SYS address b7e50ae7 base at b7e2e000 , datestamp 48025d03


\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

hope you can figure out whats causing this.
thanks

Answer:BSOD windows xp sp3 code inside

What is your Anti-Virus program? How do you connect to the internet, is it Wireless or Wired? If Wired, update your Network Adapters driver. If you have a name brand computer (Dell, HP etc) go to the computer manufacturers Support/Download Drivers site and type in your Service Tag or Make and Model # and download the Network Adapter for your model. If you use Bit Defender AV:
Go to Start/Run and type ncpa.cpl and press enter. In the Network Connections, Right click the Local Area Connection/Properties/Internet Protocol (TCP/IP) Use other IP address....uninstall the anti virus security NDIS (Antivirus) mini filter...etc...

4 more replies
Relevance 53.3%

https://drive.google.com/open?id=1BJhjrNSaa6rIpQW1d4R_7aFvTuC0Czqx

google file of the .dmp, just started happening 2 days ago after an update so i'm assuming it's software related, doesn't happen constantly, sometimes i can go hours without blue screening, get a DPC watchdog violation when i let it error report

The bugcheck was: 0x00000133 (0x0000000000000001, 0x0000000000001e00, 0x0000000000000000, 0x0000000000000000). 

More replies
Relevance 52.07%

Hi there!

I built this computer about three years ago (august 2009), and I don't remember when BSODs started. When they started, I didn't notice any regular pattern, but now I am suspecting it's something related to Internet Explorer and Windows Live Hotmail website.

Usually this pc is always on, and I'm used to let my browsers (and their tabs) open, always ready to navigate my fav websites.
If I let Windows Live Hotmail website opend for a while (few hours? a day?) in IE9, a BSOD appear when I click again on that tab.

OS info:
My OS is 64-bit Windows 7 Professional SP1.
I assembled my PC in august 2009 (installing a full retail WinXP 64-bit), then I installed this OS in august 2010.

Hardware info:
Intel Core i7 920 @ 2.67 GHz
ATI Sapphire VAPOR-X 4870 1GB GDDR5
Asus P6T SE
OCZ DDR3 6GB 1600Mhz Platinum Tri Channel

During blue screen, I read something related to atikmpag.sys.
I googled it and I follow instructions for updating/reinstalling video driver, but I never solved the problem.
Ps: sometimes, when BSOD happens, I get nervous and don't give system time to finish the dump... I don't know if this could be a useful info ^^

If you need any more details, please let me know!
I really appreciate your forum and the help you always give people.
Thank you!

Answer:Windows Live Hotmail site inside IE cause me BSOD

Bump!

1 more replies
Relevance 52.07%

Hello there,few days ago i updated some of my pc hardware and went for Windows 7 Ultimate, wanted to try something new
But last few days im getting BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL or Kernel Power...w/e i have no idea what is that so i made those dumps, please help me!

Answer:Getting random BSOD, Windows 7 Ultimate (dumps inside)

Hello. You can see this thread to try to alleviate your problem. Stop overclocking if you are, for anything. Make sure you're running the latest video driver.

Update these drivers to the latest or uninstall them from the system if unimportant:

AsIO AsIO.sys Mon Dec 17 04:11:49 2007
spum spum.sys Sun Mar 22 08:35:35 2009

9 more replies
Relevance 52.07%

Hi,
Well until a couple of weeks ago my computer started to restart when I would be on the web every now and then and an occasional pop-up that says "Ad from Dcads." I would appreciate any assistance in resolving this problem please. Thank-you for your time.

Computer Facts:
-Microsoft Windows XP
-Media Center Edition
-Version 2002
-Service Pack 2

-Gateway
-AMD Athlon(tm) 64 Proccesor
-3500+
-2.21 GHz, 896 MB of RAM

HJT Log:
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:33:47 PM, on 2/27/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16608)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\system32\bsyys.scr
C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe
C:\WINDOWS\RTHDCPL.EXE
C:\Program Files\Digital Media Reader\readericon45G.exe
C:\WINDOWS\system32\LVCOMSX.EXE
C:\Program Files\Logitech\Video\LogiTray.exe
C:\Program Files\Common Files\InstallShield\UpdateService\issch.exe
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\zHotkey.exe
C:\Program Files\QuickTime\QTTask.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Logitech\Video\FxSvr2.exe
C:\Program Files\Gadwin Systems\Prin... Read more

Answer:Pop-up probelm & occasional restart without my consent (HJT Log Inside)

11 more replies
Relevance 51.66%

Hello, this morning I received a blue screen upon turning my PC on, this 'page fault in non paged area' happens during the windows loading screen so I'm unable to get into my PC to get any real information for you guys, I'll write down my PC specs and what I was doing on my PC yesterday that might've caused this, I hope it helps!

PC specs

Windows 7 64bit
Motherboard - Asus Z87-k
CPU - Intel i5-4670k ( I've tried booting in both the stock setting of the CPU and the oc'd setting, neither work
Graphics card - Nvidia 780gt 4gb
RAM - 8gb (2 sticks) DDR3 1600mhz corshair 9-9-9-24
SSD - Samsung 840 pro series 128gb (OS is on this)
HDD - Seagate barracuda 2tb
CPU cooler - Corsair h80
PSU - corsair 750w

Yesterday on my PC I installed the latest windows update and ran 2 games for the first time (apologies if this means nothing )

I had bsod issues in the past but they were due to an over clocked graphics card which has since been reset and I've been all clear since

The only other thing I can give you guys is a picture of the bsod that I took if that's of any use?

Thanks for reading this, I'd be very greatful for any help on this issue, I'm not too knowledgeable on PC's but I will do my best to give you more information if you need it, cheers guys!

EDIT - I ran windows startup repair and it said it couldn't fix my problem automatically

Answer:bsod happening during windows loading screen (more info inside)

Just a quick update, I triedbooting in safe mode and the bsod still happened

Any help would really be appreciated!

5 more replies
Relevance 51.25%

Hi,
my problem with my laptop is Windows 8 BlueScreen and also Restart my laptop Without display BlueScreen and sometime this happened for more than 1 time regularly. this problem is happend Sometimes more than twice a day, when i'm doing regular things like reading a .pdf or watching a movie or gaming.
Please Help me to Salve it.
note1: Here is the .zip file created after i've ran SF Diagnostic Tool Attachment 31753
note2: 1month ago, Updated Windows 8, and components drivers (video, audio, ethernet).
note3: Last night, I installed last updates for Windows 8 Compeletly.

Thank you

Answer:BSoD on Windows 8 & Sudddenly Restart without display BSoD

I'm late for work, but wanted to let you know that I saw this.
I'll be back on this evening, or tomorrow AM with some suggestions.

For starters:





At work we start all repairs with a set of diagnostics. Often they find problems that weren't even expected. It's a waste of time to try to fix software on a system that has hardware problems.
Please try these free diagnostics for starters: Initial Hardware Diagnostics
Also, please ensure that you have ALL available Windows Updates (it may take several trips to get them all).

3 more replies
Relevance 51.25%

Using Win 7 64b home premium, firefox and Hotmail.

I am getting a random little box with numeric 1 and item inside the box when I go the the inbox. I cannot do anything when this box shows up. Usually will go away when I stop and restart Hotmail.

I have done a bunch of Google searches and cannot find any information on this.

If any one has tips on this or has run into it before, I would appreciate the help.

Dave
 

More replies
Relevance 50.84%

Hi,

My computer installed Spywarebot and Virus Protect Pro which I understand are rogue Spyware. I have tried and apparently successfully removed them using by scanning with SpyHunter, Spybot Search & Destroy, Adaware, Registry Mechanic, Spyware Doctor, AVG Anti Malware and my MacAfee Virus scanner.

However, everytime I turn off or restart my computer, it starts up to the windows XP welcome screen, hangs there then reboots and continues to do this cycle. Here is the HJT log:

Logfile of HijackThis v1.99.1
Scan saved at 8:34:50 AM, on 9/08/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\www\Apache22\bin\httpd.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\WIDCOMM\Bluetooth Software\bin\btwdins.exe
C:\WINDOWS\system32\CTsvcCDA.exe
c:\program files\mcafee.com\agent\mcdetect.exe
c:\PROGRA~1\mcafee.com\vso\mcshield.exe
c:\PROGRA~1\mcafee.com\agent\mctskshd.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MpfService.exe
C:\PROGRA~1\McAfee\SPAMKI~1\MSKSrvr.exe
C:\Program Files\MySQL\MySQL Server 5.0\bin\mysqld-nt.exe
C:\WINDOWS... Read more

More replies
Relevance 49.2%

I've been backing up "My Documents" with CDBurnerXP because

1. I consider Windows Backups to be opaque and I prefer to keep them simple and to know what is going on
2. Windows Backups does some things I believe are risky so I will not use it
3. Windows 7 had a deep directory structure problem and I presume Windows 8 continues to
4. It's ridiculous to backup "Windows" when I really only care about the safety of my data and since I am a slow typist who can't type at 3 Gigahertz it seems unlikely that I will ever have produced enough data that won't fit in one piece of optical media
5. I prefer to use a backup medium that has no moving parts and no firmware and humidity and mechanical shock resistant and contains no software and nothing vendor specific and blank DVDs are one such medium
6. I don't understand how a "backup DVD" can get scratched if there are never children and animals in the building (movie DVDs are a different matter)

Unfortunately, I can't continue down this route because my Windows 8 is now inside VirtualBox and I can't seem to make CDBurnerXP and Windows 8 recognize a blank DVD as a suitable target for a backup.

I am looking for suggestions for DVD burning software that is free and is known through your personal experience to work inside VirtualBox.

Answer:can I burn a DVD from inside Windows 8 inside VirtualBox

I can't comment on VirtualBox, but the most popular free burning program is Imgburn. Although I have Nero burning software, I find the Imgburn to be easier to use for iso CD's and DVD's.

The Official ImgBurn Website

I also use Macrium for backing up my PC's, but I back up to separate hard drives, not DVD media. There is a free version of Macrium.

Macrium Reflect FREE Edition - Information and download

3 more replies
Relevance 49.2%

Hello.
Usually I use Linux (because its faster easier more secure and just better) but in the past week I have had to install Windows XP pro sp2 on a seperate hard disk for remote desktop connectivity with the Windows system at work.
Installation wouldn't work for whatever reason, so I had to install win2000. I thought I would keep that on, but unfortunatly updates would not work at all. So I then relatively painlessly updated to XP and installed SP2. From there it was working, and everything about it worked (apart from in games I get odd white lines on textures, but thats probably for another thread). After installing all the latest updates, graphics drivers etc I put steam on for some games (mainly cs). During the games occasionally it would freeze the game and lock up the system and if left long enough would bluescreen, say something about nv4_disp.dll and dump my physical memory to disk or something.
Now whenever I try to boot (into any one of the options on the safe mode menu thing) it loads, flashes a BSOD and then restarts.
If anyone can offer any help I would be very grateful.
Cheers, Lee.
 

Answer:BSOD, restart, BSOD, restart - constant cycle

It's the Nvidia drivers that caused this. Find your windows XP cd and boot from it - go to the recovery console and type chkdsk /r. It might fix it so you can boot - if you can log on afterwards, immediately uninstall the nvidia drivers.
 

2 more replies
Relevance 48.79%

Hi all,

I've been having probs with my windows 7 setup. Computer was built by a work colleague a couple years ago and was fine for a bit but then began to bluescreen. Here are the specs...

OS: Windows 7 Home Premium (x64) (build 7600)
MB: ASUSTeK Computer INC. P5Q-PRO
CPU: 2.40 gigahertz Intel Core2 Quad Q6600
GFX: NVIDIA GeForce 9800 GT
RAM: Corsair dominator 2x2048 DDR2


I initially ran memtest and found and replaced 2 out of 4 (1024) faulty memory sticks - the new replacements (2x2048) tested to be fine. After that with bluescreens continuing I decided to upgrade to windows 7, thinking possibly it was down to vista being flaky, and hoping not to have to replace any more hardware.

Well, after two months of stable windows 7 on the machine I found BSOD has come back as of today (8 so far) here are the dumps collated from an app called 'whocrashed'.

Code:
Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.


On Sun 6/13/2010 5:20:49 PM your computer crashed
This was likely caused by the following module: ntoskrnl.exe
Bugcheck code: 0x50 (0xFFFFFF8005382AE0, 0x0, 0xFFFFF800028E9704, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
Dump file: C:\Windows\Minidump\061310-19593-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel &a... Read more

Answer:Windows 7 BSOD/Restart

Hi -

Please follow these instructions --> BSOD Posting Instructions

Regards. . .

jcgriff2

.

1 more replies
Relevance 48.79%

hello.
I'm newbie here. DESKTOP-KS3QIKB-Mon_04_04_2016_195502_94.zip
Im got BSOD in this day. Im try to find out the problem then I find this forum.
anyone help me pls
thank for your time!

Answer:windows 10 pro x64 got BSOD when restart

Hi and welcome to tenforums

So the verbose analysis shows a problem with nvlddmkm. this is an nvidia driver (your graphics card GTX 670).
When we follow the thread we can see that this driver is having an issue.

Code:
Child-SP RetAddr : Args to Child : Call Site
ffffd000`290d40b8 fffff803`a016c2e9 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
ffffd000`290d40c0 fffff803`a016aac7 : 00000000`00000001 00000000`00000000 fffff803`a031b878 c8e00001`0a909963 : nt!KiBugCheckDispatch+0x69
ffffd000`290d4200 fffff803`a005e865 : 6ad1331c`723ebf00 0000002a`ab08ff6e 00000000`00000202 fffff803`a009c2bc : nt!KiPageFault+0x247 (TrapFrame @ ffffd000`290d4200)
ffffd000`290d4390 fffff803`a00ec94f : ffffd000`290d0000 ffffe001`f65253a0 ffffe001`faab36a0 00000000`000003e2 : nt!PspReturnQuota+0x45
ffffd000`290d43f0 fffff800`6c331556 : fffff800`6cd28580 fffff803`a009038e fffff800`6c382374 ffffe001`faab3550 : nt!PsReturnPoolQuota+0x2b
ffffd000`290d4420 fffff800`6cd28580 : fffff803`a009038e fffff800`6c382374 ffffe001`faab3550 ffffe001`f007a180 : nvlddmkm+0x41556
ffffd000`290d4428 fffff803`a009038e : fffff800`6c382374 ffffe001`faab3550 ffffe001`f007a180 fffff800`6c336892 : nvlddmkm+0xa38580
within this thread there is a reference to the IRP

Code:
IRP List:
ffffe001efcce300: (0006,0118) Flags: 00000404 Mdl: 00000000
when we follow the irp we see that the same drive... Read more

0 more replies
Relevance 48.79%

I have a Compaq pressario cq61. and it restarts after showing BSOD and gets stuck at BIOS. please help. i am atatchn the minidump file. i run
windows 7
2gb ram
intel pentium dual core 2.10 ghz. t4300
 

Answer:BSOD and restart on Windows 7

Is your system still under warrenty? Because if it is then you need to have them fix your system with no questions asked. Here is why:

Your error is 0x124: WHEA_UNCORRECTABLE_ERROR and is described as "A fatal hardware error has occurred."

This error code and definition has replaced the older XP code 0x9C: MACHINE_CHECK_EXCEPTION and though it is older the definition still is applicable: This is a hardware issue: an unrecoverable hardware error has occurred. The parameters have different meanings depending on what type of CPU you have but, while diagnostic, rarely lead to a clear solution. Most commonly it results from overheating, from failed hardware (RAM, CPU, hardware bus, power supply, etc.), or from pushing hardware beyond its capabilities (e.g., overclocking a CPU).

Honestly, this is a very difficult error to work with because as it says a clear diagnosis rarely comes forth and I have never seen a minidump with either error codes give a definitive answer. I know IT techs that don't like working with it. What makes it so difficult is that it can be any hardware in your system -- and I mean any. Your dump simply cited hardware as the issue and nothing more definitive which is always the case in these errors.

Here are some of the causes that were determined to be the source o 0x124/0x9C errors from posters here and abroad: NIC, DVD/CD drives, dust build up around the CPU that caused overheating of said CPU, bulging capacitors hidden by heatsi... Read more

11 more replies
Relevance 48.79%

hello.
I'm newbie here. Attachment 73017
Im got BSOD in this day. Im try to find out the problem then I find this forum.
anyone help me pls
thank for your time!

Answer:windows 10 pro x64 got BSOD when restart

Hi and welcome to tenforums

So the verbose analysis shows a problem with nvlddmkm. this is an nvidia driver (your graphics card GTX 670).
When we follow the thread we can see that this driver is having an issue.

Code:
Child-SP RetAddr : Args to Child : Call Site
ffffd000`290d40b8 fffff803`a016c2e9 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
ffffd000`290d40c0 fffff803`a016aac7 : 00000000`00000001 00000000`00000000 fffff803`a031b878 c8e00001`0a909963 : nt!KiBugCheckDispatch+0x69
ffffd000`290d4200 fffff803`a005e865 : 6ad1331c`723ebf00 0000002a`ab08ff6e 00000000`00000202 fffff803`a009c2bc : nt!KiPageFault+0x247 (TrapFrame @ ffffd000`290d4200)
ffffd000`290d4390 fffff803`a00ec94f : ffffd000`290d0000 ffffe001`f65253a0 ffffe001`faab36a0 00000000`000003e2 : nt!PspReturnQuota+0x45
ffffd000`290d43f0 fffff800`6c331556 : fffff800`6cd28580 fffff803`a009038e fffff800`6c382374 ffffe001`faab3550 : nt!PsReturnPoolQuota+0x2b
ffffd000`290d4420 fffff800`6cd28580 : fffff803`a009038e fffff800`6c382374 ffffe001`faab3550 ffffe001`f007a180 : nvlddmkm+0x41556
ffffd000`290d4428 fffff803`a009038e : fffff800`6c382374 ffffe001`faab3550 ffffe001`f007a180 fffff800`6c336892 : nvlddmkm+0xa38580

within this thread there is a reference to the IRP

Code:
IRP List:
ffffe001efcce300: (0006,0118) Flags: 00000404 Mdl: 00000000

when we follow the irp we see that the same d... Read more

4 more replies
Relevance 48.38%

Hello,

So first of all, I am not a computer wizard. Some terms I might not understand as i've never had a problem like this before, but i'll try to enlist as much information as possible.

Since last friday or so, i've suddenly encountered a BSOD. Now, i've had them before and it was only once. After a reboot it usually never happend again and everything was cool. But since friday, they popped up again. Mainly during playing Battlefield 1, but i've also had it happen during Dragon Ball: Xenoverse 2.

I've had multiple BSOD errors, which are:

- IRQL NOT LESS OR EQUAL
- BAD POOL HEADER
- MEMORY_MANAGEMENT
- SYSTEM_SERVICE_EXCEPTION
- APC_INDEX_MISMATCH

Now if it were one, I might've been able to pinpoint the issue, but.. They're constantly different errors that happen. Now, to explain a bit more in detail how it goes:

So i'm just playing a match of Battlefield 1. After 10/15 minutes give or take, it'll bring me to the blue screen. After processing whatever it has to process, computer shuts down and it starts to restart. At this point it will be stuck in an infinite restart loop, where my monitor will not display anything as well. It just says it's not connected to something, which it clearly is. After manually closing and rebooting, i'll have to do this a few times or mess with the HDMI a little bit before I get my monitor to pop up again. Once that happens, I get stuck in the beginning screen where you can see your HDD/SSD installed. It won't go further than that unless I ... Read more

More replies
Relevance 48.38%

Hello,

So first of all, I am not a computer wizard. Some terms I might not understand as i've never had a problem like this before, but i'll try to enlist as much information as possible.

Since last friday or so, i've suddenly encountered a BSOD. Now, i've had them before and it was only once. After a reboot it usually never happend again and everything was cool. But since friday, they popped up again. Mainly during playing Battlefield 1, but i've also had it happen during Dragon Ball: Xenoverse 2.

I've had multiple BSOD errors, which are:

- IRQL NOT LESS OR EQUAL
- BAD POOL HEADER
- MEMORY_MANAGEMENT
- SYSTEM_SERVICE_EXCEPTION
- APC_INDEX_MISMATCH

Now if it were one, I might've been able to pinpoint the issue, but.. They're constantly different errors that happen. Now, to explain a bit more in detail how it goes:

So i'm just playing a match of Battlefield 1. After 10/15 minutes give or take, it'll bring me to the blue screen. After processing whatever it has to process, computer shuts down and it starts to restart. At this point it will be stuck in an infinite restart loop, where my monitor will not display anything as well. It just says it's not connected to something, which it clearly is. After manually closing and rebooting, i'll have to do this a few times or mess with the HDMI a little bit before I get my monitor to pop up again. Once that happens, I get stuck in the beginning screen where you can see your HDD/SSD installed. It won't go further than that unless I ... Read more

Answer:BSOD playing games, so far 5 multiple BSOD errors, listed inside

Solved it after a long few days. Memtest never showed the RAM was broken, but my RAM seemed to be the issue nontheless. I solved it, thanks for the help.

1 more replies
Relevance 48.38%

Hi all! I really need help, everytime I try to install a Windows 7, it restarts or BSOD after the Windows 7 logo.

Here's what happened. I'm gonna tell you how it started.

I was just watching a video and suddenly my speaker started a crashing noises, so I removed the cable and tried reconnecting the cable, but it doesn't sound anymore. So I decided to restart my PC, then after select Windows 7 (I have 2 OS, Vista and Windows 7), it says:
"Windows Failed to start. A recent hardware or software change might be the cause", when I start windows, it restart or BSOD after the logo. I tried entering in Safe Mode but it still stops on a certain file, can't remember it now since I have deleted my OS.

So I also tried booting with my Windows Vista, still can't start it, I tried booting using Last Known Good Configuration but still same result,
here's where it stops when I tried to boot Safe Mode using Vista: crcdisk.sys

I am pretty sure that I didn't add any hardware on my PC.

So here's all the troubleshooting I tried to do:
1. I tried to boot on the Windows 7 Installer to repair the OS, but it restarted after Win7 Logo
2. I tried booting my Harddisk on a different PC, when selecting OS, it still shows Windows Failed to Start", I tried to install a fresh Windows 7, surprisingly, it passed the Windows 7 Logo and it even finished the whole installation, I can successfully open this new installation without any problem (be noted that this is on another PC)
3. Then I tri... Read more

Answer:BSOD/Restart after Windows Logo

This is a hardware issue; something is faulting. Normally, I would think it was the hard drive, but you said it worked in another machine, so this is fairly unlikely. I would still recommend a hard disk diagnostic using the hard drive's manufacturer tools. See HD Diagnostic for how to find the hard disk manufacturer and the diagnostic tools.

You are correct that it may be memory. Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

The other two possibilities are your PSU is failing or your motherboard shorted out. You can try Britton30's PSU Testing to check the PSU. This really only helps if the problem is obvious through the multimeter readings, so if it comes back clean, the only real way to test is to swap your current PSU with one that you know works (borrow from a friend if you can). If everything comes back clean out of all these tests (you may want to run Memtest86+ three or four times for seven passes each time before ruling out the memory), it is most likely the motherboard that failed.

Also, if you have any PCI cards, try removing them and seeing if Windows will start.... Read more

6 more replies
Relevance 48.38%

Windows 7 - BSOD 7e while system restartWindows 7 Home Premium, 64bit (installed by recover CD ).

System is just new installed.
Antivirus is Norton
my system specs:
CPU:I7-3610QM 2.3GHz
DDR3 8G
HDD 1T
Display :intel + NVIDIA GeForce GT 630M optimus technologyChief river platform


I've been trying to troubleshoot my BSOD issues the last 2 months but I'm not sure what to do from here. During restart my computer will BSOD; sometimes restart 5~6 times will BSOD, sometimes 2000~3000 times not happen, always seemingly random but once happen ,next time will continuous BSOD.

A few things I've already done:

Updated BIOS.
Scan virus (no virus)


Any help would be appreciated.

Thank you for your time.

Answer:Windows 7 - BSOD 7e while system restart

I'm confused:
Your specs say 32 bit.

Your problem statement says 64 bit.

Help me out please.
thanks

4 more replies
Relevance 48.38%

Hy guys. I have a Dell Laptop (and Inspirion 15R SE - 7520) but after uninstaling a beta version of AMD Catalyst, my laptop entered in BSoD loop. Whenever i try to boot it, it restart and try to auto repair. Doesnt work. I alredy tryied to use a restoration point but doesnt work too. Tryied following Windows instructions, fixing MRB (MBR), etc. Nothing. Please guys. Help me!

Sorry for bad english.

Answer:Windows 8 BSoD restart loop

The next time the system tries to repair, let it finish. On the subsequent boot, hold down your power button while Windows 8 is loading (you'll see a white circle of dots going around) to turn off the system. Start the system up again, then hold down the power button again when you see Windows 8 loading again. Start the system up again, and you should be given advanced options for booting. Use the Troubleshooting options to select Safe Mode.Windows Startup Settings (including safe mode) - Microsoft Windows HelpIn Safe Mode, go into device manager and uninstall your display adapters by expanding the display adapters area, right clicking each display adapter, and selecting the uninstall option. Make sure to Delete driver software for this device when prompted to do so by putting a tick in the box.Open Device Manager

-----

1 more replies
Relevance 48.38%

While I was away I let vidoe play on my monitors and when I came back My PC restarted and my usb key board and mouse did not work. Luckly I have a PS/2 key board connected to my PC for such an emergency. Then from their I shut down the PC but I did a restart and during the shut down phase It gave me a BSOD.
The restart reinitialized both my keyboard and mouse. And when my PC started back up after proper shut down and I let it set for a while it gave me this.


Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: fe
BCP1: 0000000000000008
BCP2: 0000000000000006
BCP3: 0000000000000006
BCP4: FFFFFA800DEBE000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\051213-66830-01.dmp
C:\Users\MainPC\AppData\Local\Temp\WER-74069-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Code:
http://rapidgator.net/file/7eb861ab7cd9f4219d03aa2a306d2bb0/051213-66830-01.dmp.html
http://rapidgator.net/file/4e89a5b434322c80f6de3c64a5f1d166/WER-74069-0.sysdata.xml.html
This is my first post I hope I followed the proper procedure.

According to the Blue Screen of Death (BSOD) ... Read more

Answer:Keyborad and Mouse did fuction after restart BSOD during next Restart

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

1 more replies
Relevance 47.97%

hello, my name is billy, please help me.
i have some problem here,
my windows 8 auto restart when i shut it down and the other problem is bsod when i play fifa.

i've upload some files to tell you what is my problem.
please help me, thankyou for your attention

Answer:my windows 8 auto restart when i shut it down and bsod

You might want to shut off some of those startup programs, like Internet Download Manager and Yahoo Messenger. Does Fifa run under Steam? Well, Steam will not work right unless your Dot Net 4 and above are in perfect order. Also, any time you get a BSOD, you should do an external disk scan, because when windows 8 blue-screens it can sometimes damage your drive. But it is easily fixed, you can download Hiren's Boot CD from the link below, boot to it, go to Dos programs, go into Hard Drive tools, and you can start by seeing if GWscan detects your drive. GWscan is on the 3rd page of entries. If that does not find your drive, you can use the tool for the maker of the drive which should be included in Hard Drive tools.

You want to see if the Disk program detects any read errors, if it finds them, it usually sets it up to repair it with a full disk scan, that will take about an hour for new machines and 500 GB to 1 TB hard drives.

You can also download GWscan or WDdiag or Seagate Seatools from their websites. GWscan is on the Gateway site, but it can check a large number of drives. But that's what I would do first. If your hard drive is OK, then I would start by removing some of those startup items.

1 more replies
Relevance 47.97%

Hi all,

In the past days my laptop shutdown unexpectedly only with uTorrent opened... I thought it was from high temperature but now I just don't know what is it because I don't think the laptop is too much warm and it not doing any heavy task when this happens...

Reports and BSOD logs in attached in this post.
Hope you can help me.

Thanks,
Andr?

Answer:BSOD Windows 7 x64 shutdown and/or restart randomly

Your crash reports indicate a possible problem with your Windows installation. Please follow the Windows Genuine and Activation Issue Posting Instructions. Post the results in your next post; do not start a new thread.







  
Quote: Originally Posted by Brink


NOTE: The MGADIAG report does not contain any sensitive or personal information, and is best posted un-edited for us to be able to help.

7. Select (highlight) all of the MGADiag report that you just pasted, and click on the code box # toolbar icon to wrap the report in a code box when posted. (see screenshot below)

Attachment 220060

3 more replies
Relevance 47.97%

Greetings,

I receive a BSOD everytime I restart windows 8.1 or whenever windows restarts automatically to install updates (although it finishes updating successfully on reboot) with error code 0xc000021a. Besides that, the PC works normally. A few days ago the problem was reversed, i.e. Windows crashed on shut down with the same error but not on restart, this happened after I uncheched the Turn on fast startup option in power options which apparently solved similar problems for other people. I had to perform a Windows Refresh, keeping both files and installed apps intact, to reverse the PC in the previous condition so now it crashes again on restart but afterwards boots normally, though with some delay. I tracked the problem to Winlogon process terminating unexpectedly but I don't know how to fix the problem since a reinstallation of Windows didn't solve it. I suspect that a third party program is causing the problem and since I kept all of them after the refresh it still causes problems. Since I am not an expert however I could be totally wrong. The last incident happened today (18/02/2014) on restart due to a windows update. I would greatly appreciate any help offered on this matter.

Thank you

Answer:BSOD on restart Windows 8.1 0xc000021a WINLOGON_FATALERROR

Hi,

Uninstall Freeride Games or whatever software you have made by them etc...


Code:
4: kd> lmvm X5XSEx_Pr148
start end module name
fffff800`04e12000 fffff800`04e24000 X5XSEx_Pr148 (deferred)
Image path: \??\C:\Program Files (x86)\FreeRide Games\X5XSEx_Pr148.Sys
Image name: X5XSEx_Pr148.Sys
Timestamp: Thu Aug 02 08:51:27 2012 (501A77CF)
CheckSum: 00017C75
ImageSize: 00012000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Update Realtek HD Audio codec driver:

RTKVHD64 RTKVHD64.sys Tue Nov 27 08:48:01 2012 (50B4C491)

Update Synaptics touchpad driver:

SynTP SynTP.sys Fri Nov 30 02:38:37 2012 (50B8627D)

Uninstall Rapport:

RapportCerberus64_59849 RapportCerberus64_59849.sys Sat Sep 21 17:47:05 2013 (523E13D9)
RapportEI64 RapportEI64.sys Wed Jan 22 13:35:14 2014 (52E00F62)
RapportHades64 RapportHades64.sys Wed Jan 22 13:35:12 2014 (52E00F60)
RapportKE64 RapportKE64.sys Wed Jan 22 13:35:12 2014 (52E00F60)
RapportPG64 RapportPG64.sys Wed Jan 22 13:35:32 2014 (52E00F74)

Update from Lenovo (you'll have to e-mail them or something. Nobody knows how to update this and it seems to cause issues on 8(.1) universally):

LhdX64 LhdX64.sys Mon Jan 11 10:06:58 2010 (4B4B3E92)

Uninstall Daemon Tools Lite and replace it with PowerISO:

dtsoftbus01 dtsoftbus01.sys Thu Jun 20 03:22:51 2013 (51C2ADCB)

Uninstall Avast. Use removal tool for it after. Set Windows Firewa... Read more

19 more replies
Relevance 47.97%

Good day people,
does anyone here having the same problem after downgrading from Windows 8 Pro to Windows 7? I'm using Asus S550CM notebook with 4GB RAM, 1.3gHZ CPU, NVIDIA GT635M and Core i5. This happens to me everytime I install Windows 7 in my system. After filling the required fields during the installation, the computer restarts then BSOD. Thanks in advance

Answer:BSOD after the restart during the install of Windows 7 Ultimate

Back up your files, unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, set SATA controller to AHCI, Hard Drive first to boot, Save changes and Exit.

If you notice UEFI Boot choices in BIOS Boot Priority menu then proceed with UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with. If you don't want a UEFI install you can Bypass UEFI to Install WIn7. This video can help you decide: UEFI BIOS vs. Legacy BIOS - YouTube

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. I would use a fresh ISO written with tool in Step 2 as yours is in question.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wipi... Read more

1 more replies
Relevance 47.97%

I started having trouble and posted the minidump in another forum to see if they could help me. I will only reference it here so there would't be any repetitions of tests that I have already done there.
 
http://www.tenforums.com/bsod-crashes-debugging/45979-memory-management-crash.html
 
The last update was after I did a full reinstall of Win10 (not an upgrade from 8.1 like last time) on an SSD drive and it was working fine. [/size]
 
Suddenly, as I was downloading a game, it started working REALLY slowly, the screen turned black and it restarted (so no BSOD that I can tell).[/size]
 
Anyone have any ideas?

Edit: Moved topic from Windows 10 to the more appropriate forum. ~ Animal

Answer:Windows 10 BSOD/Black Screen/Restart

Please run this report collecting tool so that we can provide a complete analysis:  http://omgdebugging.com/bsod-inspector/
When done a Notepad document will open with the name of the file and it's location. (By default it'll be a .zip file located on your Desktop)
Simply upload the .zip file with your next post and we'll move on from there.
If it doesn't work for you, then please try this:  http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/
 

0 more replies
Relevance 47.97%

Ok.. Well..
It all started while i was playing diablo3 and watching a video on my dual monitor setup when my system froze and a blue screen( first time after i got this system from ncix.com two weeks ago). Restarted automatically before i can see what the error was. After reboot. It happened again. Decided to run startup repair and no luck. Went into safe mode with network. Opened exploror and started searching for similar issues. Most recommended system restore. So. Having installed adobe illustrator a day ago and a windows update few days a ago i ran system restore...but got the blue screen again WHILE running restore...
Startup repair -> system restore -> undo restore. "cannot complete restore". Tried going into safe mode with networking but this is when every boot got the split second bsod on windows logo and restarts. Ran windows memory diagnostics
"hardware problem detected"
Opened case took ram on slot 3 out. Ran diagnostic
No problem detected
Reboot
Same bsod at logo
Startup repair
Chkdsk c: /f /r
And this is where i am at

Specs:
Intel i5 3570k not overclocked
Mushkin 120gb ssd. System drive
Wd caviar black 1tb storage drive
Evga gtx560ti fermi 2gb
Gigabyte z68a-d3h-b3
Corsair vengeance 2x4gb ddr3 1600
650w atx corsair gold

Thank you in advance
Please help~~~~

Answer:Bsod at windows logo flashes then restart

Sorry if it looks like i have two topics going on my app shows only one as being on the forum before this post wasnt visable now the newer one i wrote isnt there.. Could be the forum app screwing with my posts?

Anyways. Chkdsk finish with no errors
I restarted had same problem
Spammed f8 turned off auto restart
Wrote down stop codes
Restarted
And now it stuck pre post
So.... I am completely lost

2 more replies
Relevance 47.97%

**EDIT: Included SF Debug zip**
System Specs:
CPU: i7-920 [Cooled via Corsair H-series liquid cooling]
RAM: 12GB Corsair Dominator [Fully tested; 100% pass]
GPU: Geforce GTX 670 4GB [x2; SLI]
OS: Windows 8.1 w/ lastest drivers from Windows Update
Main Drive: Intel 510 120GB SSD

This actually started with Windows 8 at some point. I performed a fresh install of Win8 on a Win7 machine (part of that Win8 Pro for $20).

I had hoped that 8.1 might fix the issue if there was a 'core' driver that had been corrupted...sadly it did not.
Below is the Kernel Memory Dump, this is the same result for every BSoD I get. And the BSoD isn't on every power down...sometimes the machine will sit at 'Shutting Down' for a few seconds (less than 10; <3 SSD) or last over half a minute before finally powering down. The other times...it's upwards to 1 minute and the "unhappy face".

Code:

Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [E:\System Data\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
Symbol search path is: http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
Machine Name:
Kernel base = 0xfffff803`dbe74000 PsLoadedModuleList = 0xfffff803`dc138990
Debug session time: Fri Feb 7... Read more

Answer:[BSoD] Windows 8.1 - On Power Down (Restart or Shutdown)

Hey,

Blue Screen of Death (BSOD) Posting Instructions

7 more replies
Relevance 47.56%

Hey guys,

I have a problem I have never experienced before. I'm running an HP Pavilion 20 SKU Number H5N96AA#ABL which has:
AMD Dual-Core Processor E1-1500 (1.48 GHz)
4 GB DDR3 1 TB HDD
Windows 8.1
AMD Radeon HD 7310

The problem: I am stuck in a restart loop with windows constantly saying that the system has encountered an error and a restart is required. With 'system thread exception not handled" as a reason.

My attempted solutions:
- I have ran several memory tests, including Windows Memory Test, and have not found any RAM issues
- I disabled secure boot, and enabled legacy mode.
- I have attempted to use a Windows 8.1 Home disc image (burnt to a DVD) and boot from there. While it does seem to be booting from the CD/DVD, I get the same error.
- I have attempted to use a windows 10 upgrade image to see if I can attempt to update to windows 10 and solve the issue. I get the same error that it has encountered an error, but the reason changes to "Memory_Management".
- I have attempted to run in safe mode from the USB, attempted to disable automatic restarts, run safe mode with command prompt, enable boot logging, enabled boot logging mode and even tried low resolution mode with no success at extracting any more information.
- I have been able to run Knoppix off a DVD with no problems.

3533mb of RAM were detected.

In Knoppix, trying to mount the NTFS drive that has Windows yields an interesting error. It is:

"This partition contains a Windows 'hibe... Read more

Answer:BSOD Restart Loop on Windows 8.1 and Windows 10 Setup

Hi @fvalle. Welcome aboard.

You got 0x7E BSOD in Win8, and Win10 yields some disk/partition related errors, as I read from your post.

Do you have access to another computer right now? If so, download Partition wizard Bootable CD (the last one in the link). Burn it in a blank CD or in a USB flash stick.

Boot into Partition Wizards GUI following this instructions. When you are on the last screen, take a camera snap of the screen and upload the snap here.
Screenshots and Files - Upload and Post in Ten Forums

We need to see the partitions and parameters.

Also, please fill up your System Specs in full.

1 more replies
Relevance 47.56%

Hey guys,

I have a problem I have never experienced before. I'm running an HP Pavilion 20 SKU Number H5N96AA#ABL which has:
AMD Dual-Core Processor E1-1500 (1.48 GHz)
4 GB DDR3 1 TB HDD
Windows 8.1
AMD Radeon HD 7310

The problem: I am stuck in a restart loop with windows constantly saying that the system has encountered an error and a restart is required. With 'system thread exception not handled" as a reason.

My attempted solutions:
- I have ran several memory tests, including Windows Memory Test, and have not found any RAM issues
- I disabled secure boot, and enabled legacy mode.
- I have attempted to use a Windows 8.1 Home disc image (burnt to a DVD) and boot from there. While it does seem to be booting from the CD/DVD, I get the same error.
- I have attempted to use a windows 10 upgrade image to see if I can attempt to update to windows 10 and solve the issue. I get the same error that it has encountered an error, but the reason changes to "Memory_Management".
- I have attempted to run in safe mode from the USB, attempted to disable automatic restarts, run safe mode with command prompt, enable boot logging, enabled boot logging mode and even tried low resolution mode with no success at extracting any more information.
- I have been able to run Knoppix off a DVD with no problems.

3533mb of RAM were detected.

In Knoppix, trying to mount the NTFS drive that has Windows yields an interesting error. It is:

"This partition contains a Windows 'hibe... Read more

More replies
Relevance 47.56%

So, I've been trying out Windows 7, and I've been pleasantly surprised for the most part. However, I've been getting several BSODs, including some 0x124 ones that I didn't have on this same computer using XP. The only new hardware I've installed is a hard drive. Anyways, the non-0x124 ones happen seemingly randomly, and they force the computer to reboot even though I have automatically reboot on error disabled in the system options, so I'm not sure what they are.

The 0x124 stop has only happened twice, but the other ones are more frequent. I'm looking over this thread for help with the 0x124 stops, but I would really appreciate some help with the others! Here are the only two dumps in my minidump folder, which I'm guessing are the 0x124 ones, but I'll post them anyway.

Answer:BSOD, forces restart but have auto restart off

Yes, it contains 1 STOP 0x124 error message. The only possible issue that I could see is with hamachi.sys dated Feb of 2009 and amdxdata.sys dated May of 2009. Beyond that you're stuck with the advice in the STOP 0x124 thread.

1 more replies
Relevance 47.15%

Have a BSOD on shutdown/restart of the PC where the bluescreen just flashes up on screen for about 4 seconds then goes away again i.e on restart the blue screen flashes up before the dell logo and system boots as normal- i have never seen a blue screen do this before. The blue screen never comes up during normal running of the pc just on shutdown/restart.

i am guessing the fault is with a network driver. I have two NIC on the PC- one internal NIC from Dell and one Intel Gigabit PCIe card. Disabling either one of the cards gets rid of the blue screen. Doesnt matter which is disabled as long as one is disabled so it doesnt appear isolated to one card more some form of conflict.

My real problem is i cannot update the driver for the PCIe card or replace it- it is attached to a camera and the driver and card are the only compatible version with the camera. I also do not have space to add a new NIC card and i need both NIC's to work so i need to somehow get rid of bluescreen without changing the PCIe NIC driver or disabling one of the cards. If it pointed to be an issue with the PCIe NIC hardware i could replace it with an exact card. I have re-installed windows but the issue remains.
Any help would be appreciated i cant find any info on "EbNDIS.sys"

Answer:BSOD on shutdown/restart of windows 7 64 bit Dell PC - EbNDIS.sys

Hello skjom, can you post it following the Blue Screen of Death (BSOD) Posting Instructions?

9 more replies
Relevance 47.15%

Hi,

I recently repurchased a computer off my brother who I sold to a while ago. I have the HDD from back then and simply swapped his HDD for mine. However, the computer simply loads up to the windows logo and then BSOD, and I can't pause the screen or get a good look at the error. Even in safe mode the same thing happens. I've repairing my PC with the windows 7 CD and sfc check using CMD but nothing works.

The only thing I can think of is the video card was upgraded and the drivers are messing up. However i have no idea how to install them as when i download them, they are in .exe format and you cant install drivers that are in exe format. When i plug my brothers HDD in it loads perfectly.

if anyone could please shine some light on this issue itd be much appreciated. thanks!

Answer:BSOD then restart after windows logo - cant use safe mode either

I would suggest reinstalling Windows onto the [new] HDD.

1 more replies
Relevance 47.15%

Hi I'm new here, I've been searching for the error that caused my PC to force restart and I saw that you guys have an entire section with BSOD Crashes. My PC crashed for the third(?) time now, here is the dm log collector log...MIGUEL-Sat_02_21_2015__84435_70.zip. It would be great if some of you guys can help me. Thanks

Answer:BSOD, Windows crashes and prompts to restart while browsin

Please get all available Windows Updates.
I would suggest you to uninstall the currently installed ATI Driver using the Display Driver Tool from this **LINK**. Once it has removed the drivers, reinstall the latest drivers from the ATI Website and see if the crashes persist or not. Uninstall Open Hardware Monitor.


Code:
OpenHardwareMonitor.sys Sat Jul 26 15:29:37 2008 (488B26C1)

OpenHardwareMonitor.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

GEARAspiWDM.sys Thu May 3 21:56:17 2012 (4FA2E2E1)
CD-ROM Class Filter Driver by Gear Software.[br]Also comes with iTunes
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys

HECIx64.sys Tue Jul 3 00:14:58 2012 (4FF21D62)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

dump_storahci.sys Thu Jul 26 04:30:35 2012 (5010ABCB)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys

RTKVHD64.sys Tue Oct 30 10:51:36 2012 (508FA328)
Realtek High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys

intelppm.sys Tue Nov 6 04:55:02 2012 (50988A16)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

Rt630x64.sys Fri Dec 28 01:04:06 2012 (50DCE1F6)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt... Read more

1 more replies
Relevance 46.74%

Hi,

My name is Gil and I've inherited a laptop which I believe was seriously infected (FBI Virus.) I really don't like messing with viruses so I ran malware bytes 100 times, iOBit System Care 100 times and felt like it was running decently for the most part.

Well, after a little bit the computer would no longer load windows and I would receive a BSOD ***STOP: 0x07b error while starting windows. This comes up in Windows Normal and any variation of safe mode. Well when I was messing with it more, I found in system recovery options a factory restore and I ran it. After running this, it is still doing the same thing and continues to BSOD as soon as I get to the starting windows screen.

This could be a hardware issue, but I truly doubt it. I have a second laptop doing the exact same thing within a week of the first one happening.

This has really stressed me out and I truly appreciate any help! Wife has to have a PC to work on for work tomorrow and I really don't want to drop money unnecessarily for a new PC.

Dell Studio 1749
-Win7 64 Bit
-500 GB SATA HDD
 

Answer:Possible Virus / MBR - Infinite Windows Loading/BSOD/Restart loop

Scan result of Farbar Recovery Scan Tool (FRST.txt) (x64) Version: 24-01-2015 01
Ran by SYSTEM on MININT-7PA78QL on 24-01-2015 23:08:12
Running from F:\
Platform: Windows 7 Home Premium (X64) OS Language: English (United States)
Internet Explorer Version 8
Boot Mode: Recovery

The current controlset is ControlSet001
ATTENTION!:=====> If the system is bootable FRST must be run from normal or Safe mode to create a complete log.

Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/

==================== Registry (Whitelisted) ==================

(If an entry is included in the fixlist, the registry item will be restored to default or removed. The file will not be moved.)

HKLM\...\Run: [SynTPEnh] => C:\Program Files\Synaptics\SynTP\SynTPEnh.exe [1909032 2010-01-14] (Synaptics Incorporated)
HKLM\...\Run: [SysTrayApp] => C:\Program Files\IDT\WDM\sttray64.exe [487424 2010-01-20] (IDT, Inc.)
HKLM\...\Run: [QuickSet] => C:\Program Files\Dell\QuickSet\QuickSet.exe [3168336 2009-11-03] (Dell Inc.)
HKLM\...\Run: [IntelWireless] => C:\Program Files\Common Files\Intel\WirelessCommon\iFrmewrk.exe [1926928 2009-09-21] (Intel(R) Corporation)
HKLM-x32\...\Run: [Adobe Reader Speed Launcher] => C:\Program Files (x86)\Adobe\Reader 9.0\Reader\Reader_sl.exe [35696 2009-02-27] (Adobe Systems Incorporated)
HKLM-x32\...\Run: [Dell DataSafe Online] => C:\Program Files (x86)\Dell DataSafe Online\Data... Read more

2 more replies
Relevance 46.74%

Hi!

I've recently been having a restart error on my Toshiba laptop whenever I put it on sleep mode or whenever I close the lid. It doesn't happen every time I do it, but it does happen once a day and it's getting annoying. I've seen a thread here with a similar problem, but that thread is now expired. I've been searching and apparently I've been getting the BSOD Power Drive State Failure 0x9F, even though I don't get the blue screen, it's just black and takes a few seconds longer to get to the log in screen.
I ran WhoCrashed and it reported the crash has something to do with usbfilter.sys and ntoskrnl.exe, and one ntkrnlmp.exe. Now I've checked my drivers and they all are updated to the latest version, the usb filter driver is also updated to the latest verson (2.0.010.273 I believe). I've checked Toshiba but they don't seem to have the previous version of the driver available and I don't really know what to do now. If someone could help me out, I'd very much appreciate it as this error is starting to freak me out. Thank you!

WhoCrashed DUMP ANALYSIS:

System Information (local)
--------------------------------------------------------------------------------

computer name: Jxxxxxx
windows version: Windows 8 , 6.2, build: 9200
windows dir: C:\windows
Hardware: Satellite L955D, TOSHIBA, Portable PC
CPU: AuthenticAMD AMD A8-4555M APU with Radeon(tm) HD Graphics AMD586, level: 21
4 logical processors, active ... Read more

More replies
Relevance 46.74%

Hi, this bsod has been messing with my mind for awhile now. I plugged in a new hard drive planning to upgrade by cloning, then suddenly my computer restarts and it continuously cycles... I disabled the restart on automatic failure to see the bsod and it says:

STOP: 0x0000007B (0xFFFFF880009A9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)

I don't have the windows recovery disk... and I have no idea how to fix it... I can remove the hard drive and plug it into my laptop but I have no idea what to do from there. Please help! Thanks.
 

Answer:Windows boot logo, quick bsod, restart cycle

9 more replies
Relevance 46.74%

Hello,
 
Several days ago, my computer experienced a BSOD with a code irql_not_less_or_equal. 
 
When I tried to restart the computer, as Windows was starting up it BSOD'd again, and now when I try to start the computer, even in safe mode, or trying to restore to a previous point it crashes/BSOD.
 
Reading some stuff about it online, it seems that reinstalling Windows was my best option (I have an OEM 64-bit edition, and if I understand correctly OEM versions of Windows don't have an option to fix it). I'm OK with reinstalling Windows, I'd prefer not to have to of course, but not terrible as I have my important stuff backed up. 
 
So, I put my Windows disk in the DVD tray, and made sure the computer was set to boot with the DVD first, but all that happens is it tries to load Windows and crashes. I've played around with it a bit, tried different setting, but I can't figure out how to get a different result, and I'm not sure if there is something else I should be doing to get it to reinstall Windows, or if it's some bigger issue.
 
 
Few Additional Details
 
I had a couple BSOD over the previous weeks, but had always been able to reboot the computer. The only piece of hardware I had installed recently was a new mouse, and I installed the newest drivers from the company's website. 
 
Any help is appreciated.

Answer:BSOD - Crash on Restart/Safe Mode - Re-install Windows

System manufacturer and model?
 
If self-built...motherboard manufacturer and model?
 
Have you tried running a hard drive diagnostic?
 
Louis

12 more replies
Relevance 46.74%

hi all

i have just installed windows 7 onto this computer and every time i start up and get to desktop everything stops working, no mouse movement, no keyboard input, screen not refreshing or moving. i have run diagnostics on all the hardware nothing wrong there. however it works fine no hanging in safe mode. any help would be much appreciated specifications are:

3.4ghz intel dual core celeron d
nivida gefore 7100 gs
2gb kingston dual channel ram
foxconn rc4107ma motherboard

many thanks in advance

adio2k11

Answer:windows 7 stops at desktop no bsod no error code no restart

That points to a driver. Did you keep the drivers given by the Win7 installer and quickly updated via optional Windows Updates, then only import those missing in Device Manager?

Users can get in trouble with Win7 if they used XPired methods to change out all drivers. Win7 is the authority on its own drivers until performance points to problems with one.

If this behavior started after install, See if you have Restore Points to go back to the point where it started then install drivers one-by-one with time to check performance. Do the same with other Updates, in small groups if necessary to rule them out.

3 more replies
Relevance 46.74%

OS - Windows 7
? x64 ?
? Windows 7 Ultimate
? full retail version
? Couple of months
? Re-installed about 3 weeks ago

? Intel i7 quad-core
? Dual-SLI NVIDIA 580 GTX
? ASUS Maximus IV Extreme
? Corsair AX 850 Watts

I built the computer myself about 3 months ago, and have had random BSOD's since I booted it up the first time. I did memtest for 2 passes with no errors, and did Driver Verifier last night with a BSOD this morning, dunno if it was because of Verifier though. I recently had a BSOD about 3 weeks ago and had to re-install Windows because it couldn't repair and I didn't have a System Restore. I also had a USB 3.0 driver that wasn't installed so I installed it, and updated my NVIDIA drivers as well to no avail.

Any help would be greatly appreciated, this is driving me nuts!

Answer:[SOLVED] Screen randomly goes black, Windows says BSOD on restart

Hello,

It seems your video card or its drivers are the ultimate cause of these BSODs. I do notice the nVidia drivers are still a few months behind, so you might try downloading the latest package from here: Drivers - Download NVIDIA Drivers

While it's worth a shot, I honestly doubt it will help. I'd expect a card replacement is necessary. See if you can return the card under the warranty, or at least test a different card in your system.

...Summary of the dumps:

Code:

Built by: 7600.16792.amd64fre.win7_gdr.110408-1633
Debug session time: Fri Aug 5 07:20:17.165 2011 (UTC - 4:00)
System Uptime: 0 days 0:14:46.148
*** WARNING: Unable to verify timestamp for dxgkrnl.sys
*** ERROR: Module load completed but symbols could not be loaded for dxgkrnl.sys
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+801f10 )
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
BUGCHECK_STR: 0x116
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x116_IMAGE_nvlddmkm.sys
BiosReleaseDate = 03/02/2011
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
*** WARNING: Unable to verify timestamp for Unknown_Module_ff111111`ff111111
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_ff111111`ff111111
Built by: 7600.16792.amd64fre.win7_gdr.110408-1633
Debug session... Read more

6 more replies
Relevance 46.33%

G'day All,

First post here - been having this problem for a few months now - developed a work around, but it's starting to get under my skin now.. Mainly because the system does it's updates at night, which means that my PC stays on (after BSOD) and usually keeps the screen on as well, which wakes me up eventually, or keeps the house hot (who cares, anyway.)

I've been reading the forums & trying to work it out myself, except the error code changes depending on what I'm doing..

I've attached the current BSOD grab, hopefully it gives enough information, and I've run the FurMark - and the display driver crashed (as usual - I'm starting to think it might be a faulty Graphics card..)

Enough of my chatter - let me know if it's something simple

Answer:Constant BSOD on Windows update, or System Restart (Or wake from sleep

1, One of the BSODs are caused by OC, stop overlocking the CPU or at least lower the frequency until the system becomes stable

BugCheck 124, {0, fffffa800c55a028, be000000, 800400}

Error : Internal timer (Proc 1 Bank 5)

[CPU Information]
~MHz = REG_DWORD 4217
Component Information = REG_BINARY 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Configuration Data = REG_FULL_RESOURCE_DESCRIPTOR ff,ff,ff,ff,ff,ff,ff,ff,0,0,0,0,0,0,0,0
Identifier = REG_SZ Intel64 Family 6 Model 26 Stepping 5
ProcessorNameString = REG_SZ Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz
Update Signature = REG_BINARY 0,0,0,0,11,0,0,0
Update Status = REG_DWORD 0
VendorIdentifier = REG_SZ GenuineIntel
MSR8B = REG_QWORD 1100000000

Processor may be overclocked!
Expected Frequency: 3200
Actual Frequency: 4217
Overclock Ratio: 1.31

2, Uninstall Daemon Tools and make sure you get rid off the SCSI Pass Through Direct (SPTD) driver.

3, Uninstall or upgrade Hamachi

4, Update the following drivers:

Marvell 91xx SATA 6G Controller
fffff880`01000000 fffff880`0108c000 mv91xx Fri Dec 25 07:45:39 2009 (4B345F93)

Marvell RAID Console
fffff880`0112c000 fffff880`0114c000 jraid Thu Oct 29 09:14:20 2009 (4AE94EDC)

Intel(R) ICH10R SATA AHCI Controller
fffff880`01287000 fffff880`013a3000 iaStor Tue Feb 09 01:11:06 2010 (4B70A81A)

ASUS Xonar Essence STX Audio Device
fffff880`07830000 fffff880`079f5000 cmudaxp Thu Oct 28 10:27:22 2010 (4CC933EA)

Saitek Magic Bus driver
fffff880`07d01000 ... Read more

1 more replies
Relevance 46.33%

Hi everyone,
Newbie here so hope I posted this in the right section.

I am not able to boot up my laptop at all so I cannot do the DM Log Collector, sorry!

I own an ASUS R500A laptop that seemed to have crashed for no reason yesterday. I was using it, went afk for a few hours, came back and saw it in Windows Error Recovery. I had 2 options - Start Windows Normally or Launch Startup Repair. Start Windows Normally loops back to Windows Error Recovery. Launch Startup Repair takes me to a blank screen with ASUS logo and a window X:\windows\system32\cmd.exe. I am unable to type anything in this box.

I cannot boot in Safe Mode (loops again). I get BsoD when i choose "Disable Automatic Restart Upon System Error". I did not install any new hardware or software recently. I also don't have a Windows 7 DVD or Recovery Disk to boot from. After a few more times trying to reboot, F8 on start up no longer takes me to the screen where I can choose to boot in Safe Mode. All I get is the Windows Error Recovery window.

Is this something I can fix on my own or should I bring it to a repair shop? I would appreciate any help you guys can provide! I'm heartbroken that I might have lost all my pictures of my beloved pets that have passed on, as well as my school work.

More replies
Relevance 45.92%

Hello everyone. This morning I turned my computer on to find that Explorer.exe had crashed. I attempted restarting explorer.exe but every time it attempted to restart it would just crash.

Details:

Problem signature:
Problem Event Name: APPCRASH
Application Name: explorer.exe
Application Version: 6.1.7601.17567
Application Timestamp: 4d672ee4
Fault Module Name: comctl32.dll
Fault Module Version: 6.10.7601.17514
Fault Module Timestamp: 4ce7c45b
Exception Code: c0000005
Exception Offset: 000000000010343c
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 7788
Additional Information 2: 7788129339cffbb182e4c538402e9d22
Additional Information 3: 44dd
Additional Information 4: 44dde8a5ebcc1fd558b2464fa8226f18

I have already begun a System Scan using sfc /scannow in Command Prompt...which just finished upon writing this up an Windows didn't find any "integrity violations"

I have NOT installed the latest Windows Updates only because I haven't gotten around to doing it. I have also read on other forums that Microsoft Security Essentials seems to be the culprit but I wanted to come here to verify that with you guys before I start messing with Windows essential applications.

What I will do in the meantime while waiting for an answer here is run a chkdsk and a virus scan(AVG).

Thanks in advance.

EDIT: Rebooted my computer and Explorer.exe now runs fine. The problem I'm going to run with is intermittent but... Read more

Answer:Explorer.exe Crashes, attempts restart, crashes again. Details Inside

Are you running both AVG and MSE? If so, remove one or the other. Having two security programs that accomplish essentially the same tasks can cause conflicts due to them accessing the same system files or system resources simultaneously. It is possible this is the behavior that is causing your explorer.exe issue.

4 more replies
Relevance 45.92%

Hi,

I have my cousins laptop - Dell Inspiron 1545 Laptop - Model: PP41L, With Windows Vista Basic, abd am having issues...

Laptop reboots at the Windows Logon Screen when trying to log into windows. I can log into Windows through Safe mode (and with networking).

Been trying to get an error message off laptop, through BSOD, but reboots too quick to grab.

Have asked a mate and he has said that it refers to video drivers.

Logged into Safe Mode with networking, and tried to download drivers from Dell website, but errors come up with download half way through...

Tried to also re-install windows, using the dell re-installation disc, but unable to see DVD Drive...

Are you able to assist?

Cheers,

Skinster
 

Answer:BSOD & restart loop at windows logon screen - Vista Home Basic

Try to Start in Safe Mode, once it does, Right click on My Computer Select Properties, then on the left pane select Advanced System Settings

Select the 3rd Settings option under Start-up & recovery.
Uncheck Automatically Restart

This wont help you in anyway to get rid of the issue but will buy you time to note down the BSOD error.
 

1 more replies
Relevance 44.69%
Question: BSOD files inside

Hi there,

I've been experiencing a lot of BSOD since purchasing my new laptop.
I thought i fixed the problem with a fresh instal, but it's happening again.

Whenever i run verifier.exe, it causes a blue screen. I removed both sticks of ram separately, and still had the problem. I'm currently running in safe mode /networking, as that's the only way it will start without immediately going into blue screen (i believe verifier is still making this happen after a restart)

Here's the error report -

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: FFFFF8800951D495
BCP2: 0000000000000002
BCP3: 0000000000000008
BCP4: FFFFF8800951D495
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

the mini dump files are attached, as well as the Windows7_Vista_jcgriff2 instructions files, however i when i ran perfmon /report, all i get is this -

An error occured while attempting to generate the report.
The system cannot find the path specified.

The rest of my system details are below -

? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? 64
? What was original installed OS on system? Windows 8
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Full retail (Home Premium)
? Age of system (hardware) 1 month since purchase
? Age of OS installation -... Read more

Answer:BSOD files inside

here's the perfmon /report i couldn't get working earlier -

I have disabled verifier, and running in regular windows mode but it seems like my entire pc is running slower now, as well.

14 more replies
Relevance 44.69%

Hello.
I have dell 3521, lot blue screen before and after format.
Pls don't lock just move the relevant forum.

Answer:BSOD f4 , even after format zip inside

I can't take a look at the moment, but my experience is that F4's are usually a HDD issue.

Run the DOS version of SeaTools in the meantime and I'll take a closer look at the. dmp files this evening.

SeaTools for DOS and Windows - How to Use

4 more replies
Relevance 44.69%

Hello,

I recently change a lot of things in my pc, i5 ram ddr3 p8p67 pro and a I have random bsod. I have no problem during games since I changed my power supply. (I didn't format after the changement)

I noticed that there is a problem with ntoskrnl.exe and AsIo.sys.

On each dump, it seems to be the same cause of the crash

Please find herwith my dumps files

I really thank you for several Help !!

Sincerely,

Answer:Hello BSOD inside w124

I can give you my configuration :
i5 2500 k
8 go ram ddr3 corsair 1600 mhz
p8p67 pro rev3.1 (last bios) (don't know if an update need to format)
gtx 460
seasonic 850 w
Windows 7 x64 ultimate

finally, the massage of the bsod deals with an uncorrectable hardware problem

4 more replies
Relevance 44.69%

I get "Windows has recovered from an unexpected shutdown"
I've never seen it before because i'm usually away from the computer when it happens, possibly it does this when in sleep mode.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 4105

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF880072A6817
BCP3: FFFFF880099D2900
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\101812-12246-01.dmp
C:\Users\Alex\AppData\Local\Temp\WER-13915-0.sysdata.xml

Feel free to ask questions.

Attachment includes Information with SF Diagnostic Tool.

Answer:BSOD Details Inside!

Your graphics driver caused both the BSODs update it:
Name AMD Radeon HD 6800 Series
fffff880`07216000 fffff880`07a27000 atikmdag Fri Nov 26 03:46:44 2010 (4CEF1F94)

Also do the following:
Install SP1
Uninstall Daemon Tools

Update the following drivers:
AMD High Definition Audio Device
fffff880`07ca0000 fffff880`07cc0000 AtihdW76 Wed Nov 17 13:02:04 2010 (4CE3C43C)

Realtek High Definition Audio
fffff880`094e7000 fffff880`09757c00 RTKVHD64 Tue Nov 23 11:14:08 2010 (4CEB93F0)

Realtek PCIe GBE Family Controller
fffff880`07b85000 fffff880`07bf5000 Rt64win7 Mon Mar 21 14:20:32 2011 (4D8750A0)

4 more replies
Relevance 44.69%

I decided to finally purchase a new computer, but also installing my own GPU and PSU.
 
I got the computer itself in the mail, took it a part and everything worked fine. I installed my GPU drivers, and immediately got a BSOD.
 
Funny thing is, whenever I configure the BIOS to boot using the OnBoard graphics, it works fine. I then can disable my OnBoard graphics, then it will force the PC to use my Nvidia GTX 550 TI.
 
 
Yet when I configure the BIOS to start up with my PCI slot, it blue screens.
 
Any ideas? Ive tried to Re-Install windows, but it ends up doing the same thing. Thinking of just returning the PC all together since I have a 1 year warranty

Answer:BSOD with GPU inside PCI slot

Hi
 
to the BC forum.
 
Can you please post the exact make and model number of your motherboard, graphic card and RAM ? . 
 
Did you tried the latest Nvidia driver instead of the default one came with the card ?

6 more replies
Relevance 44.69%

When it happens, my com suddenly slowdown and freezes eventually (in 5-10 seconds)
 
Spoiler (Highlight to read)
On Sun 24/6/2012 11:05:58 GMT your computer crashedcrash dump file: C:\windows\Minidump\062412-25849-01.dmpThis was probably caused by the following module: nvlddmkm.sys (nvlddmkm+0x19E4D4)Bugcheck code: 0x116 (0xFFFFFA80077712B0, 0xFFFFF8800F3DC4D4, 0x0, 0x2)Error: VIDEO_TDR_ERRORfile path: C:\windows\system32\drivers\nvlddmkm.sysproduct: NVIDIA Windows Kernel Mode Driver, Version 301.42 company: NVIDIA Corporationdescription: NVIDIA Windows Kernel Mode Driver, Version 301.42Bug check description: This indicates that an attempt to reset the display driver and recover from a timeout failed.A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 301.42 , NVIDIA Corporation).Google query: nvlddmkm.sys NVIDIA Corporation VIDEO_TDR_ERROROn Sun 24/6/2012 11:05:58 GMT your computer crashedcrash dump file: C:\windows\memory.dmpThis was probably caused by the following module: dxgkrnl.sys (dxgkrnl!TdrResetFromTimeout+0x214)Bugcheck code: 0x116 (0xFFFFFA80077712B0, 0xFFFFF8800F3DC4D4, 0x0, 0x2)Error: VIDEO_TDR_ERRORfile path: C:\windows\system32\drivers\dxgkrnl.sysproduct: Microsoft? Windows? Operating Systemcompany: Microsoft Corporationdescription: DirectX Graphics KernelBug check description: This indicates that an at... Read more

Answer:Y 570 BSOD (Whocrashed log inside)

hi!!, some days ago i was reading about that issue, and is because the driver of the video card that the laptop has installed is the responsible of the BSOD, just install the most recent driver, and forget the BSOD! l

3 more replies
Relevance 44.69%

Hey guys, cant seem to solve this issue by myself. Please advise.My system configCPU: Intel E7200 - 375*9.5 @ 1.2750v (266*[email protected] default)RAM: Gskill DDR2 2x2gb 900Mhz CL4 @ 2.05v (800Mhz [email protected] default)Mobo: MSI P35 Neo3GPU: XFX 8800GT 710/1825/1000 (Core Clock/Shader/Memory)PSU: Corsair VX450OS: Windows 7 beta build 7000 64bitI am getting BSOD during startup, either during logon where one puts in the password or within 2 minutes after login.This doesn't happen every time.I have succesfully stress tested my overclock, 7 Hours OCCT and 4 hours memtest86+(6 loops). All temps are within limits, though I'm not sure about the northbridge. It was very hot when I touched it after 4 hours of successful memory testing.I got 3 BSOD consecutively on each restart after completing the 4 hours of memory testing. No bsod on 4th restart and after that.I was having a similar issue in Vista Ultimate x64 before i decided to try Win7.Below is my Windows debugger(x64) log.Please help me identify whats causing the BSOD.Microsoft ? Windows Debugger Version 6.11.0001.402 AMD64Copyright ? Microsoft Corporation. All rights reserved.Loading Dump File [C:\Windows\Minidump\030109-17234-01.dmp]Mini Kernel Dump File: Only registers and stack trace are availableSymbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbolsExecutable search path is: Windows 7 Kernel Version 7000 MP (2 procs) Free x64Product: WinNt, suite: TerminalServer SingleUserTSBuilt ... Read more

Answer:BSOD // windbg log inside

Hi there!

This may be a processor issue. You may want to get your processor tested at a local computer repair shop!

9 more replies
Relevance 44.69%

Hey all, very frustrated here, any help would be brilliant.



If need anything else ill do my best.

John

Answer:Several BSOD all different, details inside.

Hello JT and welcome to Sevenforums!

To be able to help you we'll need a little more information on a few things. Please read the below tutorial, to figure how to make a complete post. By that, we're able to investigate your crashes to the end. If you're having any questions just ask us.

http://www.sevenforums.com/crashes-d...tructions.html

Thank you for you attention!
Frederik.

9 more replies
Relevance 44.69%

Hello,

I recently change a lot of things in my pc, i5 ram ddr3 p8p67 pro and a I have random bsod. I have no problem during games since I changed my power supply. (I didn't format after the changement)

I noticed that there is a problem with ntoskrnl.exe and AsIo.sys.

On each dump, it seems to be the same cause of the crash

Please find herwith my dumps files

I really thank you for several Help

I can give you my configuration :
i5 2500 k
8 go ram ddr3 corsair 1600 mhz
p8p67 pro rev3.1 (last bios) (don't know if an update need to format)
gtx 460
seasonic 850 w
Windows 7 x64 ultimate

finally, the massage of the bsod deals with an uncorrectable hardware problem

Answer:Hello BSOD inside 0x00000124

In order to assist you better, we will need you to follow the http://www.sevenforums.com/crashes-d...tructions.html. Thank you.

3 more replies
Relevance 44.69%

Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


please help i am not to good with computers

Answer:BSOD please help codes inside!!!

  
Quote: Originally Posted by harlee123


Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
please help i am not to good with computers



We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* ... Read more

9 more replies
Relevance 44.28%

Hello,

A little background:

Around a year ago I had signed up for Private Internet Access, which installs the TAP9 driver (OpenVPN I believe). I started to get blue screens on my machine (Win7 Ultimate x64), so I installed it on a 2nd Windows machine (identical OS). Same thing. As soon as I started the VPN, blue screen. I installed VirtualBox VM software, same thing on both machines. After trying various things, I ended up sending the motherboard back to ASRock (It was a Z87 Professional). They found nothing wrong, but I ended up doing a fresh install of Win7 and everything was great for about a year. Then I started having machine lockups and found out that my SSDs (Samsung 840 EVOs) were victim to the slowdowns that a lot of people were complaining about. I tried upgrading the firmware and running their "fix", then the blue screens started to happen again, this time at random times. Removed the drives, did a fresh install onto some WD Black drives, and everything was working fine. I thought the motherboard had finally crapped out as even with the onboard LAN ports, the network icon would end up with a yellow exclamation mark after about 5 minutes of usage. I had to use an add-on card to get it to work, so I decided to just build a pretty much brand new system.

I just built it today:
ASRock Extreme6/ac / Intel i7-5930K (brand new)
32Gb G.skill DDR4 (new)
Samsung 850 Pro (apparently these drives did not have the same problems as the 840s) (new) ... Read more

Answer:BSOD After connecting to VPN (details inside)

No one has any ideas either? I am stumped myself how this could happen. I tried connecting to a different router but with the same effect last night. Of course it's going through my FIOS router, but it kind of has to. I might try enabling the onboard Wi-Fi tonight and connecting via my phone's hotspot, I'm that much out of ideas.

1 more replies
Relevance 44.28%

First I was getting continues bsod and I figure out that maybe because I OC my CPU so I reset my bios to normal and my system work for long time without bsod.

Then it occurred later twice one after updating my nvidia driver to 320.18 a week ago so I figured maybe FireFox problem with the new nvidia driver so I unchecked option "use hardware acceleration when available" and there was no bsod for a week, today it occurred after start my system for just few minutes !!

? OS - Windows 7
? x86 x64
? What was original installed OS on system? Windows 7 64bit sp1
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? retail
? Age of system (hardware) 3 years
? Age of OS installation - have you re-installed the OS? reinstalled but I dont remember when.

? CPU: i7 860
? Video Card: 460 gtx
? MotherBoard: Biostar i55
? Power Supply - brand & wattage: Cooler Master 850W Pro

? System Manufacturer: N/A
? Exact model number (if laptop, check label on bottom): Desktop PC

Thanks

Answer:bsod (full details inside)

Hi -

The 2 dumps in the zip are from February snd show the overclock -

Code:
BiosReleaseDate = 06/02/2010
SystemManufacturer = BIOSTAR Group
SystemProductName = TPower I55
MaxSpeed: 2800
CurrentSpeed: 3050
We need current dumps.

Run - http://www.techsupportforum.com/foru...ed-473665.html

Regards. . .

jcgriff2

`

8 more replies
Relevance 44.28%

Basically at the beginning of last month my computer started to have random BSOD issues. I have uninstalled/re-installed drivers and tried several other recommended fixes. Now I come to you for help. The requested files are attached in a compressed folder.

Running windows 7 64 bit, Radeon 5450, AMD Athlon II x 4 640 Processor (at stock speed). Age...approx 2 1/2 - 3 years old (maybe a little more). Age of OS installation - same as age of computer. System manufacturer - HP.

Model : p6754y

If additional information is needed please just ask.

Thank you for taking the time to look at this post.

Answer:BSOD Problems, reports inside, please help.

Hi,

We have various bug checks:

WHEA_UNCORRECTABLE_ERROR (124)

A fatal hardware error has occurred. This fatal error displays data from the Windows Hardware Error Architecture (WHEA).

If we run an !errrec on the 2nd parameter of the bugcheck (address of the WER structure) we get the following:


Code:

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa8006baf978
Section @ fffffa8006bafa50
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : BUS error
Operation : Generic
Flags : 0x00
Level : 3
CPU Version : 0x0000000000100f53
Processor ID : 0x0000000000000000
^^ BUS error.


Code:

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8006bafa08
Section @ fffffa8006bafb90
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : BUSLG_GENERIC_ERR_*_TIMEOUT_ERR (Proc 0 Bank 4)
Status : 0xfa00000000070f0f
^^ Specifically, a timeout occurred somewhere along the bus (Processor 0 - Cache Bank 4 - *main CPU core*)
SYSTEM_SERVICE_EXCEPTION (3b)

This indicates... Read more

1 more replies
Relevance 44.28%

I have a Dell D620 running windows 7. In the past couple months I have had a handful of BSOD's at start up. The sign in page comes up and boom Blue Screen. Attached are the dump files.

32 bit OS
Core2 Duo
4GB ram

Answer:BSOD- Help needed Dumps inside

  
Quote: Originally Posted by cerveza1980


I have a Dell D620 running windows 7. In the past couple months I have had a handful of BSOD's at start up. The sign in page comes up and boom Blue Screen. Attached are the dump files.

32 bit OS
Core2 Duo
4GB ram


The Windows Debugging Tools aren't able to access symbols for your operating system files (in particular NTOSKRNL.EXE / NTKRNLMP.EXE / NTKRNLPA.EXE / NTKRPAMP.EXE) from the Microsoft Symbol Server - so that makes debugging them difficult if not impossible.

Please do the following:
- activate/validate the Windows installation at Genuine Microsoft Software
- run sfc.exe /scannow to replace any problem files
- open a support incident with Microsoft to see if they can fix the missing symbols issue ( Windows 7 Solution Center )
- If that doesn't fix it, then wipe the hard drive and reinstall Windows
- don't use "leaked"/torrent builds


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\032710-18330-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not b... Read more

2 more replies
Relevance 44.28%

Hello please help fixing this BSOD. If anything else needed to get the fix just ask.
Thanks in advance.

More replies
Relevance 44.28%

I had alot of things going on at once and not sure which one may have cuased the BSOD.
I had Swtor open on my main monitor, and my secondary one had a youtube video open as well as 5 other tabs open in chrome, and i had a HD video playing in VLC. All of a sudden crash so im posting the dump here for someone to look at. thanks

Answer:BSOD & SWTOR (Dump Inside)

nVidia High Definition Audio and Cisco VPN are disabled. Is this deliberate? If so, why?
Please enable these programs/devices, update their drivers, and then (if so desired) re-disable them again.

EVGA Precision (along with Riva Tuner and MSI Afterburner) are known to cause BSOD's in Win7 systems. Please uninstall this application immediately.

Your Abit uGuru drivers date from 2006. They must be updated or removed from your system.

Your nVidia System Utility Driver (nvoclk64.sys) dates from 2007. It must also be updated or removed from your system.

If you are overclocking, please stop while we're troubleshooting. Once we're finished and your system is stable, feel free to resume the overclock. The memory dump shows a small overclock (48 mHz).

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please either update the older drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having di... Read more

9 more replies
Relevance 44.28%

So the BSOD has only happened once but i have had 2 weird graphical issues where swtor crashed and both monitors flashed then my right monitor gets covered in GREEN SNOW. drivers are up to date and the BSOD came after the second time i got the green snow screen and had to reset the pc to get the snow off the screen. Heres the dump file. I also ran Memtest immediately after the BSOD just to check and it ran for almost 3 hours with no errors. 8gigs of ram and it made it through 2 full passes in that timeframe.

Answer:BSOD & SWTOR (Dump Inside)

Code:
Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\projectdwnshft\010712-20968-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03002000 PsLoadedModuleList = 0xfffff800`03247670
Debug session time: Sat Jan 7 14:18:10.236 2012 (GMT-7)
System Uptime: 0 days 0:04:32.845
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Probably caused by : usbuhci.sys ( usbuhci!UhciProcessDoneIsochTd+27 )

Followup: MachineOwner
---------

1: kd> !analyze -v
********************... Read more

6 more replies
Relevance 44.28%

My computer experiences problems everyday. I installed a fresh copy of windows and formatted my computer, thinking that would solve it, but it didnt. I get this in a report. I have also included PERFMON+BSOD report. I hope someone can help

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 4105

Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF80002B02AF7
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\072212-17284-01.dmp
C:\Users\Danny\AppData\Local\Temp\WER-25896-0.sysdata.xml

Answer:(BSOD) Full report inside.

There are 2 dumps in the upload, one naming atikmdag.sys(video driver) the second
casino.exe which probably is video related.

2 dumps naming different process on a new install is usually hardware related, any chance you have another video card to test with?

We should probably also take a look at the temps and volts on the system. D/L and run Hardware Monitor do something intense like a virus scan or gaming for a bit, Alt+Tab back to HWM expand all the trees and use the Win7 snipping tool to grab a screen shot of the HWM window, post the screen shot using the paperclip button in the advanced message box(Go Advanced button).

Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Owner\_jcgriff2_\dbug\__Kernel__\071812-21106-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02a19000 PsLoadedModuleList = 0xfffff800`02c5d670
Debug session time: Wed Jul 18 19:29:16.582 2012 (UTC - 4:00)
System Uptime: 0 days 2:41:25.862
Loading Kernel Symbols
...............................................................
........................... Read more

5 more replies
Relevance 44.28%

For some time now my computer locks up with a bsod saying bad_pool_header but it varies sometimes. I have Windows xp sp2 with all the updates and i got the latest bios version too.

http://rapidshare.de/files/6201480/minidumps.zip.html
 

Answer:BSOD problem..(minidumps inside)

Just got another Bad_pool_header BSOD heres the mindump.

Please some help me!
 

9 more replies
Relevance 44.28%

Hey, When i play games after 10-15 mins my comp shuts down and i get the following:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1053
Additional information about the problem:
BCCode: 116
BCP1: FFFFFA800C38F010
BCP2: FFFFF8800FDFD8BC
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\062313-31075-01.dmp
C:\Users\Martin\AppData\Local\Temp\WER-59748-0.sysdata.xml

I did this guide here with SF diagnostic and this is my zipfile. Please help!!!

my issue.zip

Answer:Bsod while playing game. (Zip inside)

Can no one help me?

6 more replies
Relevance 43.87%

Hi. I've been having this problem for about one year now and I decided it's time I sought online help. My PC is about 2 and a half years old and the current windows installation is roughly 2 years old (windows 7 professional x64 from microsoft academic alliance...).
Crashes/freezes happen at random times (I had gone about a month with none) and not when a particular program is running. I've attached minidump files and system health report.

Answer:BSOD BSOD Driver irql-not-less-or-equal/freezes with immediate restart

Related to netr7364.sys 802.11 USB Wireless Adapter Driver from Ralink Technology, Corp. I would re-install newest

ALSO

Asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).

9 more replies
Relevance 43.87%

i had BSOD 5 days ago on my Brand new self made computer , and then a system update happen 1 day after the BSOD of death(s) and it stopped for 3 days , and then it happened again , but this time , it BSOD and then restarted my computer for me it self . I uninstalled aero and any dvd driver virtual installer and installed sptd installer as people say that was the case of the bsod and how to fix it. But after all that , i wake up too a restarted computer saying windows have had a unexpected shutdown etc etc .

I have attached my dump files here .

my computer has the following ( just on my receipt)

Intel core 15-3750k Processor (6M cache , 3.40 ghz )

Gigabyte Z77x-ud3h Motherboard

Corsair 120gb neutron ssd

corsair 16gb (2x8gb) vegeance ddr3 1600mhz cl9

liteon ihas324 dvdrw black

gigabyte gtx660 Ti standard

750w xfx core edition psu

nzxt phantom bk full tower cs

coolermaster hyper 412 slim cpu cooler



really worried about it since i had so much hype for a new fast computer and then these BSOD keep popping up

thanks for your time and helping me out

Answer:BSOD randomly , Dumpfile inside ? please help , no clue what it is

Welcome
Dump files are not attached. Please follow these instructions to upload files and other documents
Blue Screen of Death (BSOD) Posting Instructions

2 more replies
Relevance 43.87%

The error:

Assinatura do problema:
Nome do Evento de Problema: BlueScreen
Vers?o do sistema operacional: 6.1.7601.2.1.0.256.1
Identifica??o da Localidade: 2070

Informa??es adicionais sobre o problema:
BCCode: 1a
BCP1: 00008884
BCP2: 851CE8C0
BCP3: 851CF51C
BCP4: 00000500
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Arquivos que ajudam a descrever o problema:
C:\Windows\Minidump\061116-17940-01.dmp
C:\Users\Pedro\AppData\Local\Temp\WER-32635-0.sysdata.xml

Leia nossa declara??o de privacidade online:
Declara??o de Privacidade do Windows 7 - Microsoft Windows

Se a declara??o de privacidade online n?o estiver dispon?vel, leia nossa declara??o de privacidade offline:
C:\Windows\system32\pt-BR\erofflps.txt
----------------
I uploaded bluescreenview log and log collector
Pc was formated, installed drives, updated amd drive from oficial site, and for last updated all my drives with drive booster 3 pro and the problem persists.

More replies
Relevance 43.87%

Hello all,
First time posting here so let me know if I'm doing anything wrong.

So I have been having BSOD pretty regularly after a recent erase and install of Windows 7. At first it started off my keyboard would stop responding and I would have to restart my computer. The thing about that is it would hang at 'shutting down" and not do anything. Now I'm getting BSOD with mostly the same errors about twice a day with the keyboard thing. I tried using Verifier but it keeps crashing before it gets into windows. I'm attaching the dump logs from the SF Diag tool.

Answer:BSOD Few times a day 0x000000c9 (dumps inside)

Hi GenericHero, welcome to SF .

I can relate as Iwas experiencing pretty much the same things you are that is why when going through
the dumps the picture painted in my head was a dying motherboard, which is what I had .

How old are the components?

3 more replies
Relevance 43.87%

Hello, I've bought a new computer and I've playing battlefield 3 and I've been getting bluescreens at random intervals, 5 minutes into the game this morning, yesterday I played for hours without one. I've had 4 in total over the course of 6 hours playing. I've attached the files that were requested in the sticky & also my minidumps.

My windows is 64 bit, retail, just got installed this week, my hardware is all new, it got tested at the pc shop for over 24 hours under heavy load with no issues, so this is a bit worrying =(

I managed to keep 2 of the 4 bluescreen extra info -
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 3081

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002FF9DD3
BCP3: FFFFF880055515A0
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\110511-5382-01.dmp
C:\Users\Luke\AppData\Local\Temp\WER-7035-0.sysdata.xml

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 3081

Additional information about the problem:
BCCode: a
BCP1: 0000000000000100
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF80002E8ABB6
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
I also ran the windows system checker 5 times and it didn't f... Read more

Answer:BSOD playing BF3, multiple errors inside

I had no bluescreens for 4 days doing the same thing, then got 3 within 12 hours of each other - heres the extra dump files, maybe someone will be able to help me this time =)

2 more replies
Relevance 43.87%

PC Specs:

AMD Athlon FX-55
Asus A8V-Deluxe motherboard
Graphics Card(s): GeForce 6800GT (also tried Radeon 9800 Pro)
RAM: 2GB Kingston in 4x KVR400X64C3A/512 modules
HDD's: 2x WD Caviar 250GB 7200 RPM models (and an older WD IDE model) in a RAID0 configuration using the Promise FastTrack 378 controller.
Windows XP x64 Edition
PSU: CoolerMaster Real Power RS-450-ACLY ATX12V 450W

I use the onboard soundcard, and have no PCI cards installed.

For starters: I built this machine about two and a half years ago, and it has been rock solid for the last two and a half years up until about a week ago.

Here's my issue: I started getting various crashes, everything from DRIVER_IRQL_NOT_LESS_EQUAL to NTFS.sys or fasttx2k.sys (the onboard RAID controller of my motherboard's driver) to no BSOD and just random reboots.

I've got a fair bit of PC building experience and extra hardware laying around, so I decided to troubleshoot the problem for a bit myself before asking for help. I've cleaned all the parts with compressed air, and all the contacts of the RAM cards and my video card, but still no luck, the system still crashed.

I started by running memtest for a night, and it got through 8 passes on all 2GB of RAM with no errors. Kingston is usually quality RAM, so I didn't really think this was the problem.

Then, I unplugged my HDD's from the RAID controller, and stuck in an old IDE HDD I had laying around and formatted it to a new ... Read more

Answer:Numerous Crashes/BSOD's... info inside

Okay, this is what I found:

Your first two Minis point to driver fault with tcpip.sys which is a file essential for a Windows based machine machine to use tcp/ip protocols (use Networking or the Internet).

There was also this warning that ntoskrnl.exe was unabled to be verified by checksum; therfore there is the possibility it could be either corrupted or missing.


* Microsoft has information on errors with tcpip.sys


Third Minidump - amdk8.sys which is an AMD Processor Driver required by motherboards supporting AMD Athlon processors.

In all three minies you will find them pointing to either X64_0xD1 errors (the first two) or X64_IP_MISALINGED (third one).

I know you did a fresh reinstall of XP, but the dumps are pointing to faulty drivers as the issues. Could it be your CPU???

By the way, I know several people who have the same motherboard and they all say the same thing, "Rock Solid."
 

8 more replies
Relevance 43.87%

I have a Gateway DX4710-UB301A, with an AMD Radeon HD 6600 series and Windows 7 Professional. It randomly blue screens, no matter what I'm doing at the time. The error codes are in the attached picture. Also I don't know if it's related, but I have 6 GBs of ram installed (two 2gbs,and two 1gbs), but the system settings AND the BIOS say that it only has 4gbs, and I ran the diagnostic and it didn't detect any problems.

Answer:Random BSOD on computer(errors inside)

Hi and welcome to TSF!

So many different crashcodes usuall indicates a ram / memory issue.
Also, some systems / mobos do not seem to handle mixing different types of RAM sticks well.

Please as a test, take out the two 1GB sticks. See if it runs more stable. Also for more specific help, please upload full info as described here:
http://www.techsupportforum.com/foru...ml#post2545708

2 more replies
Relevance 43.87%

Dell Desktop Computer
date of purchase Jan 2011
Windows 7 Home premium Service Pack 1 64 bit OEM (original install)
Model: Studio XPS 7100
5.9 windows rating
Processor: AMD Phenom II X6 1045T Processor 2.7 GHz
8 GB of ram
AMD Radeon HD 6670 (brand new)

Tech guy at work suspected the video card. We replaced it with a new one and it still BSOD'ed

Initially when I am about to BSOD my display's will turn off. This is why we replaced the video card. Sometimes they come back on and I can proceed as normal, however when the audio cuts out I know it will then BSOD.

Once the audio cuts out or freezes on a note the BSOD will occur in about 10-seconds.

Thanks in advance dear gurus for all your help and consideration.

-Nick

Answer:BSOD - Crashes randomly about once per day.. details inside

Security Software: ??? Make sure to install security software. I recommend either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.
Crashes are DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.
If you are overclocking any hardware, please stop.

Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.
Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.
Download the drivers you want for your display card(s)
Click Start Menu
Click Control Panel
Click Uninstall a program
For AMD:Uninstall AMD Catal... Read more

3 more replies
Relevance 43.87%

Hello,
I'm sorry to bother you helpful people, but it seems that my Laptop (Asus X550L, Win 8.1) has been having random BSODs regardless of what I am doing. Hopefully I'll manage to upload the dump correctly :P

Thank you in advance!

Answer:BSOD can't point to specific cause (Dump inside)

Hi Kurgelis & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
******************************************************************************** *
* Bugcheck Analysis *
* *
*******************************************************************************
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd00023eecc30, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd00023eecb88, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
------------------


TRAP_FRAME: ffffd00023eecc30 -- (.trap 0xffffd00023eecc30)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe001a29c55a0 rbx=0000000000000000 rcx=0000000000000003
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff801bf901bc9 rsp=ffffd00023eecdc0 rbp=ffffe0019d2fd100
r8=ffffd00023eecde0 r9=0000000000... Read more

3 more replies
Relevance 43.87%

Normally I can get by these on my own, but my friend is having frequent BSoD and I'm very unfamiliar with this one.

Any help would be appreciated.

Information:
Gateway MX3701
-Windows XP
Probably caused by : ntoskrnl.exe ( nt+22f13 )

Minidump attached. (There were several, but they were all the same. This is the most recent one.)
 

Answer:Laptop giving BSoD, minidump inside

This minidump is a 1A error. Microsoft's recommended fix is to install KB931784: http://support.microsoft.com/kb/929338
 

1 more replies
Relevance 43.87%

Hello everyone i keep getting BSOD when i turn the pc off while using chrome with many tabs open (some of them tend to be youtube clips or any other flash player) so i unistalled chrome and insalled firefox i just got another BSOD watching a vimeo video. Here is my log hope you guys can help me.
Best Regards

Edit: Here is the windows log

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88010355DBB
BCP3: FFFFF880037E8328
BCP4: FFFFF880037E7B90
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\100214-31247-01.dmp
C:\Users\Reis\AppData\Local\Temp\WER-133302-0.sysdata.xml

Answer:BSOD i suspect flash player (DM log inside)

Hi

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats including BSODs.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows
Report us for any further BSOD after installing Service Pack 1.

2 more replies
Relevance 43.46%

I just rebuilt my game pc and ever since I installed windows 7 64bit anytime I hit restart it says windows is shutting down, the screen goes black and stays black. I have to press the power button to force a shut down and then restart it. BUT, if I shut down windows with the shut down button the pc powers off normally and hitting the power button makes it boot just fine. So everything works perfect, except when I try to use the restart button on windows it hangs after it says shutting down windows.

I have every update available from windows update installed already, disc has service pack 1 on it already.

I am running windows 7 64 bit pro installed. (I did a clean install, no upgrades)



My hardware in it is...... (everything has the current drivers installed)

Gigabyte z170xp-sli motherboard that has the current bios installed.

Intel core i7 6700k 4.0ghz cpu.

Crucial mx300 SSD hard drive.

Evga gtx 1070 video card.

Sound blaster z sound card.

16gb corsair ddr4 ram.

Corsair 650 watt PSU.

27 inch samsung monitor connected via hdmi.

More replies
Relevance 43.46%

I've got a problem. This laptop starts over after reboot, within 2 minutes. Gets the error: Windows has encountered a critical problem and will restart in one minute.

MS Security Essentials thinks it has SIREFIR. But wont clean. I cant get MALWAREBYTES to run.

Would hate to reinstall... Attached is FRST log.

What's my next step?

Scan result of Farbar Recovery Scan Tool (FRST written by Farbar) Version: 25-07-2012 01
Ran by SYSTEM at 25-07-2012 11:22:11
Running from F:\
Windows 7 Enterprise (X86) OS Language: English(US)
The current controlset is ControlSet003

========================== Registry (Whitelisted) =============

HKLM\...\Run: [GrooveMonitor] "C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe" [30040 2009-02-26] (Microsoft Corporation)
HKLM\...\Run: [IgfxTray] C:\Windows\system32\igfxtray.exe [141848 2009-09-23] (Intel Corporation)
HKLM\...\Run: [HotKeysCmds] C:\Windows\system32\hkcmd.exe [173592 2009-09-23] (Intel Corporation)
HKLM\...\Run: [Persistence] C:\Windows\system32\igfxpers.exe [150552 2009-09-23] (Intel Corporation)
HKLM\...\Run: [Adobe ARM] "C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe" [843712 2012-01-02] (Adobe Systems Incorporated)
HKLM\...\Run: [AppleSyncNotifier] C:\Program Files\Common Files\Apple\Mobile Device... Read more

Answer:Restart loop: Windows has encountered a critical problem and will restart in one minute

Please do the following:Open notepad (Start =>All Programs => Accessories => Notepad). Please copy the entire contents of the code box below. (To do this highlight the contents of the box, right click on it and select copy. Right-click in the open notepad and select Paste). Save it on the flashdrive as fixlist.txt start
HKLM\...\Run: [] [x]
C:\Windows\Installer\{afa9be9c-6e25-844d-0d21-e6f80b2448ce}
C:\Users\Project 9\AppData\Local\{afa9be9c-6e25-844d-0d21-e6f80b2448ce}
endNOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating systemNow please enter System Recovery Options then select Command PromptRun FRST (or FRST64 if you have the 64bit version) and press the Fix button just once and wait.The tool will make a log on the flashdrive (Fixlog.txt) please post it to your reply.While you are still booted into System Recovery Options run FRST.

Type the following in the edit box after "Search:" so it looks like this:

Search: services.exe
Click Search button and post the log it makes to your reply.Reboot Normally.

2 more replies
Relevance 43.46%

I have try all the ideas everyone has had about drivers, deleting the file that causes the problem and nothing is working.. not sure if one of the video cards is going bad, but here is the dump file if anyone can help greatly appreciated.. win 7 ultimate 64
I7 2600

Answer:BSOD Bccode 116 atikmpag.sys dump file inside

STOP 0x116: VIDEO_TDR_ERROR troubleshooting

Either your RAM or one of the video is defective, try using one card at a time.
RAM - Test with Memtest86+

2 more replies
Relevance 43.46%

Hi,

I randomly have been getting BSOD's since 2 days after my machine has been running fine for months. I have no idea what to do, after some google'ing I already did a /sfc scan. to no avail (mostly because it can't finish because of BSOD's),

apperantly some outdated driver could be the cause of this. As a last resort I'm sharing my Minidump files and I hope you guys could help me.
http://www.mediafire.com/?4nz92n4i2dvn2ol
Kind regards, Alibambam!
 

Answer:Getting BSOD's (DPC_Watchdog_Violation) randomly since 2 days, minidumps inside

14 more replies
Relevance 43.46%

First I will give a short backstory on my problem. Every day I will get a blue screen and do a system restore and it will work again for a day or two, but then I will get the same BSoD again. I have recovery discs should I use them? Or is there a way to fix this? Thank you.


Problem signature:
Problem Event Name: BlueScreen
Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF800030C273D
BCP3: 0000000000000000
BCP4: 0000000000007D93
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Answer:BSoD: Memory Management + additional information inside

Follow the instructions here> http://www.techsupportforum.com/foru...ta-452654.html
Lets see if the BSOD dump file(s) can tell us whats going on.

1 more replies
Relevance 43.46%

Hey all.

I've recently had a machine blue screening, used to be perfectly fine. I think it's hardware failure.






Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 109
BCP1: A3A039D895C47924
BCP2: B3B7465EE841487A
BCP3: FFFFF80003853B10
BCP4: 0000000000000001
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1


Tried to upload .dmp file but it said it was unable to upload.

Answer:BSOD idling machine, error logs inside

Click on button below ....

It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip. Screenshots and Files - Upload and Post in Seven Forums

1 more replies
Relevance 43.46%

I've been getting the blue screen randomly a lot lately

any help?

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2058

Additional information about the problem:
BCCode: 50
BCP1: FFFFE4801867D6B4
BCP2: 0000000000000001
BCP3: FFFFF80003089A18
BCP4: 0000000000000007
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Answer:BSOD Browsing the internet error and details inside

This happened a few moments ago:

do you know what could be causing it?

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2058

Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF80002CDB712
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

4 more replies
Relevance 43.46%

? OS - Vista/ Windows 7? Windows 7 Home Premium
? x86 (32-bit) or x64? x64
? What was original installed OS on system? This OS, Win7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM version, came pre-installed
? Age of system (hardware) Approximately 1 month old
? Age of OS installation - have you re-installed the OS? No, approximately 1 month old OS
? CPU Intel Core i5 760 2.80ghz (Stock setting)
? Video Card EVGA Geforce GTX 460 SuperClocked Edition 1GB Memory (Stock setting)
? MotherBoard MSI H55M-P33
? Power Supply - brand & wattage Xion 600 watts

God I hope someone can help me. My system will not boot at all, and I'm forced to use SafeMode. I'm not sure how useful the information will be in the attached file since I'm in SafeMode, but the perfmon test wouldn't work. I got an error saying the system cannot find the path specified. If there are any other ways for me to post or describe information please let me know and I'll gladly do so.

The BSODS will occur either during the Windows Loading screen, right before the desktop appears, or about 30 seconds after my desktop appears. It's almost like clockwork, and I'm forced to use SafeMode. I got this system about a month ago from iBuyPower, and haven't tampered with anything and have only gamed and browsed on it. I really hope I can find a solution before I consider sending it back, and I have more faith in the support here just by readi... Read more

Answer:Bizarre BSOD on startup. Detailed info inside.

Hello and welcome to TSF.

All bugchecks are video-related. The fact that a System Restore didn't help tells me that there's something wrong with that graphics card. I truly think your best bet is to send it back to the manufacturer or RMA the card.

I find it strange that it's so systematic if it's hardware-related, though. One thing you can try to do from Safe Mode is reinstall DirectX: Download details: DirectX End-User Runtime Web Installer

If that doesn't help, you can try removing the video driver via Device Manager (help here if you need it: Accessing Device Manager | DT Roberts) and seeing if you can get into Windows normally.

Keep us posted. Best of luck.

Devin

BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Jan 7 02:52:00.740 2011 (UTC - 5:00)
System Uptime: 0 days 0:00:46.222
BugCheck 117, {fffffa8006ae4010, fffff88004935e64, 0, 0}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+12ee64 )
BUGCHECK_STR: 0x117
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Dec 29 21:31:38.164 2010 (UTC - 5:00)
System Uptime: 0 days 1:39:24.272
BugCheck 116, {fffffa80042db4e0, fffff88004f5c028, ffffffffc000009a, 4}
*** WARNIN... Read more

9 more replies
Relevance 43.46%

Hello experts,

During the past 2 weeks i've been having some troubles with my brand new laptop and i want to make sure that this is not a hardware malfunction. Since my experience with debugging windows errors and troubleshooting such issues is pretty limited and basic i would like you to help me out with this before returning the unit to the vendor.

ROG edition G752VT laptop
8gb ram (1 stick)
gtx 970m
i7-6700hq
1tb hdd
no ssd
The only attached peripheral is a logitech m185 wireless mouse.
Nvidia drivers are latest (the only one system notified me needs update).

The laptop crashes, everything freezes for about 10 seconds or so then it automatically restarts. This only happened while having lineage2 (game) in background and browsing facebook using chrome, this time i had a steam download happening. Every bsod i got happened 1 second after i clicked a facebook or youtube link that opened a new chrome tab (not that it matters that much). The laptop came with w10 preinstalled and i was the first person to start it. I do not have any dubious, pirated or black market programs since i like to keep my system clean.

I'd like to point out that i got the laptop yesterday, had some issues with CPU load in background, it was about 20% used while doing nothing. Tracing the issue lead me to some ACPI.sys file that was using these resources unnecessarily. googling around i found out that this might be caused by a variety of different drivers/programs/situations.

Today , the CPU was in... Read more

Answer:ROG G752VT - Brand new laptop(s) same BSOD. Details inside

Hi CarlsbergFTW,

Welcome to the 10forums.

The crash was caused by a driver I believe is from ASUS software.
Please remove the ASUS software and let me know how it goes

Code:
*** WARNING: Unable to verify timestamp for NFC_Driver.sys
*** ERROR: Module load completed but symbols could not be loaded for NFC_Driver.sys

0: kd> lmvm NFC_Driverstart end module name
fffff801`d8ca0000 fffff801`d8cb0000 NFC_Driver T (no symbols)
Loaded symbol image file: NFC_Driver.sys
Image path: \SystemRoot\system32\drivers\NFC_Driver.sys
Image name: NFC_Driver.sys
Timestamp: Sun Jan 04 16:11:48 2015 (54A95834)
CheckSum: 0001CE52
ImageSize: 00010000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

0 more replies
Relevance 43.46%

hello..
I am having a problem with my laptop, with vista home prem. installed on it
I've been having this blue screen (blue screen of death) everytime I start my pc up

I can only login on safe mode which I am right now..
I scanned the first time with kaspersky when he only found 1 virus now i scanned it again it shows 7 viruses, 3 supposably quarantined, 1 repaired, 1 removed
I know for a fact that it didnt remove it cause thats what it said ast the firsdt scan
any help would be very appreciated

here is my hijackthis




Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:59:46 PM, on 8/15/2009
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v7.00 (7.00.6002.18005)
Boot mode: Safe mode with network support


Edit by chaslang: Inline HJT log removed. READ & RUN ME FIRST. Malware Removal Guide sticky not followed.Click to expand...


 

Answer:NTOSKRNL-HOOK virus, BSoD, Hijackthis inside

Welcome to Major Geeks!

Please follow the instructions in the READ & RUN ME FIRST link given futher down and attach the requested logs when you finish these instructions.

If you have problems where no tools seem to run, please try following the steps given in the below and then continue on no matter what you find. You only need to try the TDSSserv steps if having problems getting scans in the Read & Run Me First. If TDSSserv is not found, just continue on with the READ & RUN ME.
TDSSserv Non-Plug & Play Driver Disable

READ & RUN ME FIRST. Malware Removal Guide

If something does not run, write down the info to explain to us later but keep on going.
Do not assume that because one step does not work that they all will not.
After completing the READ & RUN ME and attaching your logs, make sure that you tell us what problems still remain ( if any still do )!
Helpful Notes:

If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:

Starting your computer in Safe mode

If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware, Malwarebytes and Spybot ( links are given in the READ & RUN ME) onto another PC and then burn to a CD. Then copy them to the problem PC. You will have to skip g... Read more

1 more replies
Relevance 43.46%

My laptop (Compaq) got BSOD after exploring internet , i saw somewhere that i should post Log files(c:\windows\minidump) if anyone could help me files in attachment

btw. i have to upload 2x because it has 700kb
 

Answer:BSOD after exploring the internet (Minidump files inside)

Many of your logs show a problem with RT61.SYS, a wireless adapter driver. Try uninstalling and reinstalling your wireless adapter software.
 

1 more replies
Relevance 43.46%

Hi Everyone:

This is my first post, I was on a PC hiatus while using Macs for a while, but gaming brought me back, and this seems like the place to post. I looked up my issue on Google and searched this forum to no avail.

I just got a new PC running windows 7 x64 with an AMD Radeon 7970 and Dual Screen Monitors via HDMI (One goes from DVI in the video card to HDMI on the monitor and the other just HDMI to HDMI, since the video card only has 1 HDMI port)
I have read through all posts here and have updated my direrctx (just in case) and uninstalled my Catalyst Control Center/Video drivers and reinstalled the newest versions.

If I am playing games, or when I leave my computer running and come back, I usually get:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8018DA04E0
BCP2: FFFFF88004398768
BCP3: 0000000000000000
BCP4: 000000000000000D
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\060512-9126-01.dmp
C:\Users\ScottRTL\AppData\Local\Temp\WER-170431-0.sysdata.xml

I tried to access both files above and I do not have access to them...(says I do not have Administrator Privileges, but I am logged in as Admin) I was however, able to copy them to my dropbox. I was hoping everyone would be able to help me, because even if I could read the file,... Read more

Answer:BSOD Randomly with Dual Monitors - Details Inside:

I have a similar problem and if you search 7970 dual monitor blue screen (or bsod) you'll see that its pretty common with the 7970, especially when running hdmi and dvi. I posted my dmp files here:
blue screen problem, BCCode&#58; 116 - Microsoft Answers

and I've been told it was a problem with my virtu drivers (lucid virtu), which is causing direct x to crash.

I've heard the problem doesn't occur when using a display port connection and any other connection. Also amd just released ccc 12.6 beta which is suppose to help with the problem. I'm thinking I'm going to try the beta, if I don't have any problems I will let you know.

5 more replies
Relevance 43.46%

Whenver i play utube music or w.e. it will freeze frequently and make noises because the video is playing. Then come back a bit later, but if i play a game it would much longer for that to even happen, but still freezes either way tho, but if u play utube, comes in faster, it's a 4+ yrs old computer, it's an all in one pc(ik it's lame =/) just want to know if it's my video card or what's causing the problem?

I mean i have stressed the video card for 30mins+ before, and nothing... Any ideas? I'll attach the logs, using SF diagnostic tool->grab all. I probably need to get a new computer, but if i somehow could fix this one, i could keep using it for a while longer at least. If you need more information, just reply to what i need to provide to you. Thanks.

Answer:BSOD playing utube music-read inside...

Code:
BugCheck D1, {538, 2, 0, fffff880040a6836}
This bugcheck indicates a driver attempted to access a pageable memory address when the IRQL was too high (2), to access pageable memory the IRQL must be at 1 or below. In this case, even if the IRQL was below 2 it would still bugcheck, given that A page fault which is what occurs when invalid memory is referenced in pageable memory isn't allowed to happen about IRQL 1 and it's an invalid address, I believe the starting address for user mode is something like 0x00010000 anything below is reserved so accessing it is not allowed.


Code:
fffff880`02f21be8 fffff800`02c8c169 : 00000000`0000000a 00000000`00000538 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`02f21bf0 fffff800`02c8ade0 : 00000000`00000000 fffffa80`045e7f50 fffff880`009e6180 00000000`00000087 : nt!KiBugCheckDispatch+0x69
fffff880`02f21d30 fffff880`040a6836 : fffff880`040a90f1 fffffa80`068db770 fffff880`040a39f3 fffffa80`05fa6ab7 : nt!KiPageFault+0x260
fffff880`02f21ec8 fffff880`040a90f1 : fffffa80`068db770 fffff880`040a39f3 fffffa80`05fa6ab7 00000000`00000087 : athrx+0x59836
fffff880`02f21ed0 fffffa80`068db770 : fffff880`040a39f3 fffffa80`05fa6ab7 00000000`00000087 fffffa80`05926470 : athrx+0x5c0f1

Code:
1: kd> lmvm athrx
start end module name
fffff880`0404d000 fffff880`041ca000 athrx T (no symbols)
Loaded symbol image file: athrx.sys
Image path: \SystemRoot\system32\DRIVERS\athrx.sy... Read more

4 more replies