Computer Support Forum

HP 1120 Printer Driver

Question: HP 1120 Printer Driver

Does anyone know of anwhere other then HP's website where I can download the printer driver for the Deskjet 1120 (OS Windows 98) as I can't seem to download it from there. Have managed to download other HP printer drivers & software OK. Just getting error message when trying to D/L.

Relevance 100%
Preferred Solution: HP 1120 Printer Driver

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: HP 1120 Printer Driver

Managed to find one on driverguide.com. The search facility wasnt much use though

1 more replies
Relevance 66.42%

I'm going mad trying to use this printer!
I have found only the Vista 32bit drivers.
I tried to install them (by manually select them, not with an exe application, so I can't choose the vista or xp compatibility check) to my windows 7 32bit but at the end I got an error about the spooling service that was blocked during running.
can anyone please help me? thanks!

Answer:Canon Printer LBP 1120

It is best to uninstall the old drivers and run the exe file in compatibility mode for the new driver.

Here's a link to Technet for the same problem.

Canon LBP 1120 can't install : Windows 7 Hardware Compatibility : Windows 7 Beta : Microsoft TechNet Forums

8 more replies
Relevance 66.01%

Dear All,

My printer is flashing a message No Print Cartridge.But Catridge is already there and properly
installed.

Please assist its urgent.
Rgds,
aligahk06
 

Answer:Top Urgent Printer HP laser jet M 1120 MFP

Please dont double post, it annoys the moderators . Is it possible to remove the cartridge and then put it back, making sure its in firmly. Ensure its in exactly the way it should be. Is there a bit of covering tape left on the cartridge?
If that fails, Canon customer services.
 

1 more replies
Relevance 66.01%

Dear All,

My printer is flashing a message No Print Cartridge.But Catridge is already there and properly
installed.

Please assist its urgent.
Rgds,
aligahk06
 

More replies
Relevance 63.14%

Need a driver for 600-1120 I need ACPI\HPQ4000 specifically... is this driver included in bundled drivers? Any help appreciated

Answer:Need ACPI\Hpq4000 driver for 600-1120

 Hi, ACPI\HPQ4000\4&15DD6BE&0  Original Fintek eHome Transceiver Driver ftp://ftp.hp.com/pub/softlib/software11/COL35151/pv-87085-1/sp49795.exe http://support.hp.com/us-en/drivers/selfservice/HP-TouchSmart-600-Desktop-PC-series/4079692/model/41...

2 more replies
Relevance 63.14%

Hi,

I have been searching several websites, downloaded a lot of junk and tested a great many so called solutions. In spite of all efforts I could not find a working solution for the LBP-1120 on W7 x64.
Although I guess most LBP-1120 users got tired of searching and simlpy threw away their printer, I refuse to do that. So I'm running it on Virtual PC under W7 x64, a complicated afair if one has to print just a few copies. The latest thread on this (and most other forums) is of 2009, so did anything happen after that date?
Does any one know of a working (tested!)driver solution for this printer? It's a shame that Cannon did not provide a decent driver. The vista / W7 x64 does not run on x64 platforms in any mode! Even for old Epsons I was able to find W7 x64 drivers.

Kind regards,
Dave
The Netherlands

Answer:Driver for Canon LBP-1120 Lasershot on W7 x64

First, make sure you uninstall any previously installed printer drivers in add/ remove programs which may conflict with the installation.

Check Device Manager for driver issues.

Select the newest version from the list. Then click download.

Do not turn on the printer until the software is installed.

Laser Shot LBP1120

9 more replies
Relevance 61.5%

I recently updated to the Windwos 10 Fall Creators update (Build 1709, 16299.125), and as soon as I updated, the graphics driver failed and switched to the Microsoft Basic Display Adapter. I tried updating and rolling back the driver without success. My driver right now is at the latest version (10.18.10.4358). I already tried fixing this issue with Microsoft support but they couldn't find any solutions. Microsoft Support Link: https://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/intel-hd-graphics-not-working-... 

More replies
Relevance 48.79%

Hiya, I wonder if anyone can help me, I have a BT multijet 3000 printer which worked fine on XP, but when upgraded to vista says unrecognised device, the driver isnt in vista, the cd which accompanied the printer doesnt work, and the company stopped support for the printer before vista came out, I wonder if anyone can help me to find the driver or tell me how to set up a generic printer so it can at least print documents, I tried the generic ones on vista xps and image one, but they didnt work, any way of how to set up the port manually, its USB, and there is no option for usb, just says lpt1 or com ports on the xps one
Help! Thanks

More replies
Relevance 46.74%

G'Day

After successfully installing a Cannon ip 4200 and after a failed install of other programs I had to roll back the windows to the "last system settings that worked". When installing the new printer driver it comes up with numerous errors depending on which method I use to install the driver.

My Question:

Can anyone tell me how to get the printer driver into a fresh state so I can re-install it?

Thanks.

Answer:Printer driver issue - can not reinstall printer driver.

Uninstall the Printer driver in Add Remove Programs. Download Glary utilities and run the defaults. Then go to Start/Run and type CMD and hit enter. in the command prompt type chkdsk /f/r and hitr enter Then type Y and reboot your computer. The Check Disk utility starts at next boot up to correct any errors.

1 more replies
Relevance 46.74%
Question: Canon LBP 1120

Please help me. I have vista 64 but i can't find any driver for Canon LBP 1120. Help me because i don't want to buy another printer.

Answer:Canon LBP 1120

Hi EugeneBek,

Welcome to the forum.

Sorry, the only drivers I can find for the Canon LBP 1120 are the 32 bit ones. There are no 64 bit ones for this printer yet from what I see.

http://software.canon-europe.com/products/0000524.asp

Shawn

1 more replies
Relevance 46.33%

I just got this Lenovo and when setting up, I am pretty sure I downloaded and installed the free Windows 10 upgrade.  In my program information, I only see Windows 8.1 as being installed.  When I go to microsoft browser, it says Windows 10.  How do I find product key for Windows 10.  I tried following directions on lenovo help site but it did not help. thanks for any advice.

More replies
Relevance 46.33%

Hi, I just purchased a Flex 3-1120 with Windows 10 preinstalled via Lenovo.com. When I try to use the Lenovo OKR to restore the system back to the orginal state, it takes to the Windows 10 recovery options. Is this correct? Will the Windows 10 receovery option restore everything including the Lenovo preinstalled programs/apps? Thanks for your assistance!

Answer:Flex 3-1120 Windows 10 OKR

Iam not sure if it will restore lenovo pre installed apps but it will restore windows 10 completely......  RegardsKamal



Ask any questions or Doubts,Always ready to help.... Dont forget to click kudos if i have helped you

1 more replies
Relevance 46.33%

Fixed: Bug fixes
 

More replies
Relevance 46.33%

New PC with Vista Home Premium (32 bit) and both the Cannon LBP-1120 laser printer and the LiDE50 scanner refuse to work.Downloaded both software from Cannon and the printer is there supposedly working OK in Device Manager. Scanner says it isn't working.Print from Word gets Error - printing under Status which then disappears. Cannon say they will ring back next week as they don't know why! Any thoughts? Thanks

Answer:Canon LBP-1120 and Vista

Have you made the printer the default printer for Vista , I think that when you have word loaded the printing properties default to Microsoft Office Document Image Writer and not your installed printer . Are you using driver 7.1.3.3 for the scanner , if not click here for that version , this is from the Australian Canon site , this is where I got the drivers for my N670u which works well under Vista . Ashley

4 more replies
Relevance 46.33%

Hi all,

has anyone successfully managed to get a Canon LBP-1120 working with Windows 8?

As you might know, Canon does not provide any Win-8 drivers, but only 32-bit drivers.

I've tried playing back and forth with XP/Vista/Win-7 drivers and running the in "compatibility mode" without any success.

Googling gave me several links about this issue, but nothing that solves my problem.

Please help!

Thanks in advance!
 

Answer:Canon LBP-1120 on Windows 8?

Eilenach said:





Hi all,

has anyone successfully managed to get a Canon LBP-1120 working with Windows 8?

As you might know, Canon does not provide any Win-8 drivers, but only 32-bit drivers.

I've tried playing back and forth with XP/Vista/Win-7 drivers and running the in "compatibility mode" without any success.

Googling gave me several links about this issue, but nothing that solves my problem.

Please help!

Thanks in advance!Click to expand...

According to this page, the Canon support may in fact be included with the Windows 8 OS. Follow the instructions there.
 

2 more replies
Relevance 46.33%

I have installed the LBP-1120 printer but somehow contrived to get Japanese voice messages when printing. How do I change these to English? Thanks

Answer:Canon LBP-1120 language

I don't know the printer but on the toolbar look for Options, Preferences, Tools or similar wording and see if it can be changed there.

4 more replies
Relevance 45.92%

i got this canon lbp-1120, it was wworking fine, i did an upgrade to WinXpSp2 now the printer wont install,when i plug it in,the system detect it but i get this massage found new hardware printer installtion cannot be complated. Anybody with a solution to this problem,i 've downloaded the latest drivers and upgrade but it still wont work.
 

More replies
Relevance 45.92%

I just replaced the hard drive and both cooling fans. When the system is powered up the screen flashes between blue to black to gray to (red-green -blue-black horizontal lines) and repeats. I reset the bios still no change. I re checked all connections the board is getting power, i can push the eject on the DVD drive and it works, all fans come on just un able to get to bios screen. I tried powering up and hitting f10  repeatedly no change. There are no beeps what so ever on power up and while the system is on. The reason for the hard drive replacement was it just stopped working, but at the time I was able to at least get to the HP screen and troubleshoot the problem. I tried un plugging power to system holding the power button for five seconds, plugging back in still same problem. I can hit the print button on the keyboard and hear the computer beep, that is the only beeps i can get. 

More replies
Relevance 45.92%

I just received my new Lenovo Flex 3-1120 ( Model: 80LX001KUS).  As delivered, it has 32G of eMMC.  I am desirous of upgrading the machine with a Hard Drive (which I have purchased).    I have discovered that due to the fact that the stock configuration does not have a hard drive that there are two parts that are needed to house and connect the hard drive.  From Lenovo?s parts list those parts are:5B40J08368 HDD Bracket  and5C10J08424 HDD Cable As much as I have tried I cannot find any option for purchasing these parts on-line. Please advise of options to acquire. 

More replies
Relevance 45.92%

I have a new Flex 3 it was working fine yesterday, I shut it down last night and plugged it in, it seems to have a good charge (and I have tried it plugged in as well), but this morning it will not boot up.  I hope I don't have to take this back to BB today, any ideas?













Solved!

Go to Solution.

Answer:Flex 3 -1120 wont power on

I had the same issue. it appears that a driver was installed but the system has stalled. It actually happened twice. I sent it in and they "refreshed" it and it did it again. I let the power die on it and it started back up. I don't know of a way to manually shut it down. The old way was take the battery out but its not the case here. The battery is sealed in side and I didn't want to give them a reason to void the warranty. You can charge stuff with the usb while it's unplugged, try draining the battery that way with a phone or tablet.

2 more replies
Relevance 45.92%

Is there any way to purchase an internal SATA cable (5C10J08424) for my Flex 3-1120 32GB so that I can make use of the internal drive bay?

Answer:Flex 3-1120 SATA cable

I found this:http://www.ebay.com/itm/5C10J08424-Lenovo-80LX001FUS-B-Flex-3-1120-HDD-Cable-B-Grade-A-/171951968701(Sorry if this can not be published)I would like better to buy it from Lenovo Is it possible?Where?many thanks

1 more replies
Relevance 45.92%

I am having trouble printing to our canon printer via a usb cable on my new XP machine. The print goes to the printer then a data protection error or something like that comes up.I've tried updating the print drivers, but the machine still doesn't want to know. But when I connect my hp 959c again via the usb everything works fine. I know the obvious answer is to forget about the canon and just use the hp, but the canon is quicker and cheaper to run.

More replies
Relevance 45.92%

Computer sees external drive, but the drive does not receive info or data

Answer:Can you use USB 3.1 with a Pavilion Slimline Model S5-1120, ...

Hi there @JPMESQ, I hope you find your Support Forum experience a positive one! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you have a question about USB compatibility. I am happy to help with this. According to the USB 3.1 specification, which is referenced here: USB - wikipedia.org, "The USB 3.1 standard is backward compatible with USB 3.0 and USB 2.0." So in terms of the connection it should work, but the performance will be limited by the slower standard. It is possible that some devices using USB 3.1, may not themselves not be backwards compatible, but that would be a case by case issue. I hope that addresses your question, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

1 more replies
Relevance 45.92%

I have a Lenovo Flex 3 1120. When I bought it, I went for the hard drive option that had the cheapest price since all the other options were HDD of various sizes and I knew I was going to upgrade to SSD anyway. The flex 3 I have though, does not have a HDD and uses an eMMC embedded storage. When I went to install the SSD, there is an empty space for where the hard drive would sit and there is no SATA connection. There is a socket in the board that is labeled "SATA conn1" but no cable.
 
I called support and was told it is possible to use the SSD and boot from it. The cable and caddy can be purchased but she said Lenovo will not supply the part. I found the part number I think,  1109-01051, but apparently no one else sells it either. There was one on ebay, but it's gone. anyone know where I can find one?
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

Answer:Flex 3 1120.- No SATA connection!

update: the item number is actually 5C10J08424. I still had a hard time a seller with it in stock. One website wanted about $70 for it not including shipping. I finally found/bought one on encompassparts.com for about $20 including shipping. I'll update once I get to try it out.

8 more replies
Relevance 45.1%

Hey i have a Dell Inspiron 1120 with win7 home premium and out of nowhere when i restarted it it said " a disk read error occurred" and to press ctr,alt,delete to restart the computer. since that didn't work i tried to re install windows 7 and my hard drive wont show up, and even when it does in the middle of the installation a error comes up that says something about the installation files missing i don't remember word for word but it was along the lines of that then when i restart again it says " BOOTMGR Missing" sorry if i left anything out just let me know what other info you need. Thanks

Answer:Dell Inspiron 1120 Boot Problem

Go into BIOS. Does the hard drive show up there?

7 more replies
Relevance 45.1%

Hi, I have a Lenovo Flex 3 1120 and am having trouble playing games on it so i was wondering if i would be able to ugrade my graphics card and what card would be compatible with it. The processor is: Intel Celeron CPU N2840 2.16GHz
RAM: 4.00GB
System type: 64-bit
Graphics: Intel HD
If you need more information let me know how and where to find it becuase i need help. Thanks! 
 
Mod's Edit: Additional information added to Subject line for clarity of issue.
 

More replies
Relevance 45.1%

When I push the start button on right side of the notebook, it will begin to start up.  The 'Lenovo' screen comes on but then the screen goes black and does not start.  I try pushing the start button again but not until I push it for a third time will the windows come up on the screen.  Is this normal or is there a problem I should have fixed?  thanks

More replies
Relevance 45.1%

My battery was charging fine and then I clicked on the battery icon today to open up and the menu and it went from telling me the battery was plugged in and charging to plugged in and not charging. It was like clicking the icon turned off the charging capability. This is a brand new computer, I've only had it for a couple weeks. The battery and adapater are both okay according to OneKey Optimizer, so I can't figure out why it's not charging. Currently running Windows 10 if that helps.

Answer:Lenovo Flex 3-1120 Plugged in, not charging

Does your battery stay at about 60%?  If so, then there actually is no problem.  Lenovo Flex 3 has a feature called "Conservation Mode," which keeps the battery from charging all the way.  This will supposedly increase the lifespan of the battery, which is a good thing, since the battery isn't meant to be replaced.  If you want to charge the battery normally, just click on the battery guage on the taskbar.  You'll find the setting there.

1 more replies
Relevance 45.1%

Hello, My windows updated a few weeks ago and after the update I had a few issues with my touch pad and sound. I was able to roll back my touch pad driver and fix the problem but there has been no update to Realtek High Definition Audio Driver for several years so there was nothing to roll back to. The issue I have been having that my sound has been contstently going up leaving the sound bar on the screen (A picture is attach below if it helps). This has become very annoying since I  have not found a way to get rid of this. So far I have tried updating and deleting then reinstalling the driver but the sound bar remains. Therefore, is there any way I can fix this? Any help will be much appreciated.Thanks,SoundMax 

More replies
Relevance 45.1%

The model of notebook is a Flex 3-1120 Laptop (Lenovo) 80LXV. After downloading Windows 10 my web camera won't function. I tried using the camera application and I was notified with the alert "Something went wrong". Skype also doesnt detect a camera for video calls.
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

More replies
Relevance 45.1%

Upgraded to Win 10 with no problems, I found that touchscreen is available only at login screen. I can type on the screen the password to log in or swipe the login image, or press the shutdown button on the screen, below right, or change the login user on screen. But as soon as I'm in the desktop (or tablet mode, I tried it) the touchscreen is not rworking anymore. As far as I can see touchscreen works perfectly even if there aren't officially  the drivers available for my machine,  I just would like to know how the enable the touchscreen in the desktop mode following the login. Thank you. Enrico










Solved!
View Solution.

Answer:Touchscreen of Touchsmart 610-1120 works only at login

Well I found it: there is a key in the registry that enable/disable the touch screen. I just set it and now it works with no problem at all, nor the drivers have been changed.

6 more replies
Relevance 45.1%

Canon do not support their BJ30 printer on a Windows 7 64 bit OS, and do not supply drivers. Does anyone know how I can use this printer on this OS, by perhaps using similar drivers etc? Thanks.
 

Answer:Printer Driver needed for Canon BJ30 printer on a Windows 7 64bit OS

on another forum, someone has managed to use the BJC-85 printer drivers to work with windows 7 - doesn't
say if 32 or 64bit windows 7 though

also have read here
http://forums.techguy.org/windows-7/990380-windows-7-64-bit-bj.html
 

1 more replies
Relevance 44.69%

I am trying to load printer drivers from the original disk for an HP 5510 multi-function printer onto the printer server of a Buffalo LinkStation LS-VL 1TB NAS Drive. I am using the Add a Printer Wizard and everything goes smoothly until I am asked to choose the appropriate printer driver from a list of different manufacturers and models. As I do not see my model listed under HP, I click the "Have Disk" button and a dialogue box which reads from the D:\ (my CD-ROM drive) pops-up and when I click "Browse" another dialogue box pops-up which lists some folders and files on the CD including autorun.inf. However, when I choose this file to install the drivers, I get a message that says the "disk does not contain information about your printer" and refuses to install. Any ideas?

(Please note that I was able to install this printer seamlessly on 2 Windows 7 machines, and 1 Windows Vista machine using the same procedure. These machines are on the same network with the same NAS hanging off it.)

Windows XP PC
HP 5510 printer with original CD-ROM containing drivers
Buffalo Linkstation LS-VL 1TB NAS Drive with Print Server
 

Answer:Downloading Printer Driver from Disk in Add Printer Wizard

You need to pick the inf file for the driver that you want to install. It is probably further down in the folders possibly under your operating system.

But it is never a good idea to use the software that comes with hardware. It is old, often first release, often buggy, and sometimes not even compatible with some updates. Go to the site and get the latest package.
 

3 more replies
Relevance 44.69%

I've recently bought a new laptop and have Windows 10 on it. I can't get my printer, a Canon Pixma MG4150, to fully work.Initially I just plugged in the printer. Windows would automatically install the drivers and it would succesfully print. However, it wouldn't scan.Therefore, I picked up the manual and read you should install the software on the cd-rom supplied together with the printer, before connecting the printer to the computer. So I uninstalled the printer from Devices, confirmed the printer is no longer listed under devices, and did a reboot with the printer disconnected from the computer (and turned off).Now I insert the printer's cd-rom and select to install the drivers from the menu that the cd-rom presents. This produces the following error message:"Printer driver is currently in use. If you are not using the printer driver, it may be used by other users on this computer. Exit all applications and printer properties and then try again. If you still have a problem, restart the computer and then try again."I don't know how to make this work. In the Task Manager, I don't see any applications that I suspect use the printer. Also rebooting and immediately starting the cd-rom, just produced the same error. Could it be that the operating system itself has the printer drivers in use... Any idea what to do?

Answer:Unable to install printer on Win10: Printer driver is in use

Forget about the CD disc. It probably does not have Windows 10 driver for the scanner. Head over to Canon web site and search for latest drivers compatible for Windows 10.i_Xp/Vista/W7/W10 Usermessage edited by XpUser

3 more replies
Relevance 44.69%

Officejet J4550 worked fine until Windows 10 came onto my computer (that took all day). How do I get my computer to recognize and use once again my home printer?

More replies
Relevance 44.69%

I have a new Lenovo Windows 7 PC. I have a Brother MFC-9440CN printer directly attached to it via USB. Per instructions, I did NOT install any Brother software on the new PC. I just connected it via USB and the PC automatically installed the drivers, etc. Printing from that PC to the locally attached printer works like a champ. I have set up this printer via a network share (called BrotherMFC) so I can use this printer from other PCs.

I have a Dell desktop Windows XP PC (that used to be the computer that had this printer locally attached) and a Dell laptop with Windows Vista that I want to access this printer via the network. On each of these PCs, I have gone through the "Add a Printer" wizard and I selected network (vs. local) printer and find the printer share. However when I select the printer share and click OK, it appears to try and install software or something and says the printer driver on the printer server is incorrect. How can this driver be "incorrect" when it is the driver the new PC used to install? Is there a "special" driver the system needs to act as a printer server properly? Or is there any known compatibility issues of printing via a network share form Windows XP and Vista PCs to Windows 7?

I know the most optimum solution is to get a wireless print server, but this solution of using a network/printer share over the network has worked great and saves me having to spend $80/$100 on a wireless print server.

Thanks for any he... Read more

Answer:Incorrect printer driver: Windows 7 printer server

Share Files and Printers between Windows 7 and XP
 

2 more replies
Relevance 44.69%

I have Windows Vista Home Premium 64 bit version and the install of the Brother DCP 7065DN is causing me grief.

The copy and scan functions are operable, but not the printer function.

I am logged in as Administrator in Vista.

Printing a test page returns an "access is denied" message.

So I try to open as administrator and trying the Print test page, returns message "Printer not installed"

I have tried the XP compatibility mode as well as XP and Win7 printer drivers but no success.

I have had no problem installed the printer on another hard drive with Win 7

Brother says my Vista is corrupted and contact support.microsoft.com . How nice, Doing a web search, it seems that Brother definitely has compatibility issues with Vista judging on all the posts. Unfortunately I see few solutions.

Any takers out there?
 

Answer:Brother Printer DCP 7065DN printer driver won't install

14 more replies
Relevance 44.69%

A poster talked about his woes with a printer under Vista; I'm having the same problem with a Lexmark printer on a Gateway . Nearly every time I plug in the USB cable, Vista HP tells me it's searching for the driver software to install. Eventually it does install, with a new printer instance.

I've been through the drill with Lexmark tech support several times; I've downloaded their "cleanup" software to completely uninstall the drivers and then reinstalled, but with no success. Perhaps 75-80 percent of the time I connect the printer, I have to reinstall the drivers.

Lexmark techs also suggested that the BIOS might be out of date, which sounds dubious because Vista handles calls to the printer, not the BIOS. But in any case the BIOS is current.

I'll try the suggestion in the other thread to disable UAC and install, but would appreciate any other thoughts people may have.
 

More replies
Relevance 43.87%

Hi,
I have just installed W7 32 bit on a desktop PC which has a HP deskjet F2180 attached to it via USB. I downloaded the W7 32 bit full feature driver and installed it. I have also enabled the printer to be shared on the network.

Now I have also just installed W732 bit on a Laptop. Both computers in are the same homegroup with same password etc.

When i try to add printer, network printer ... it finds the F2180 HP printer pretty quickly. However when it goes on to connect and download the drivers I get an error ..

"Unable to install printer. Driver files are missing or incorrect ...".

I have been searching for a solution to this, or to try and understand the problem but with no success. It would be really appreciated if anyone can shed any light on this?

Thanks in advance, Mike.

Answer:cant install printer driver when sharing HP printer

Welcome to Windows Seven Forums, Mike.

You may need to turn off password protected sharing in Homegroup's advanced settings.



You may also need to install your printer's HP driver to your laptop rather than the Windows driver.

9 more replies
Relevance 43.87%

I have new PC with vista (32 bit)Do I really have to buy a new printer?I have lexmark P706 printer which I want to keep!Anyone like myself? what did you do?thanks

Answer:Printer driver for Lemark printer (and vista)

click here

4 more replies
Relevance 43.87%

HP's LaserJet's, at least my model 4 and 4+, come with or without
a postscript interpreter. With the PS interpreter it an "m" is added
to the printer model. Adding one of these printers to windows
(for several versions) presents the administrator with several
driver options including:

1) HP LaserJet 4 Plus
2) HP LaserJet 4M Plus
3) HP LaserJet 4M Plus PS 300
4) HP LaserJet 4M Plus PS 600

OK, I understand the basics but not the details and effects of
selecting one driver over another.

Certainly if I select 1) the system will assume the printer has no PS
interpreter and only send PCL output to the printer. But, If I select
2) does that also mean PostScript will never be sent to the printer
as there are PS specific selections in 3) and 4)?

Conversely for 3) or 4) will only PS be sent, with everything
else converted by the driver?

And why resolution specific entries only for 3) and 4). Certainly you
can use either resolution in PCL mode also.

Should I enter 2 separate printers, one for the PCL output and one for PS output? The printer will automatically switch depending on
that is sent to it. Maybe additional ones for "draft" and "final" qualities too
Although I'm using my HP printers as an example, the same lack of
information exists for other printers as they have multiple drivers too. There seems little information available as to the effects or the
reasons for selecting one or another if you have the choice.
 

More replies
Relevance 43.87%

The computer with Windows 98se is not finding the HP Deskjet 960c printer which is connected with a parallel cable to LPT1 connection.  The computer has only one LPT port.  The printer has a USB connection (as does the computer) but I do not have a USB cable for the printer.The printer has never used with this computer but it was working fine on another computer.  Prior to the printer install the computer had been erased and fdisk and windows 98se reloaded.  The printerI found the drivers at DriverGuide.com.  I am not the original owner and I do not have the install instructions or the driver cd.  HP, as of 1 July no longer provides drivers for ME and older or user manuals.  My windows 98se cd does not have the drivers for this HP DeskJet model (stops in the 800 series).The last install attempt, without the drivers installed, during boot up the printer was not detected.  I then turned off the computer, removed the cable, restarted the computer then turned off again, reattached to printer cable and started again.  The computer did not recognized any new hardware during the boot up.  I then opened the printer drivers file.  During the install, a msg box came up saying "Could not locate HP Deskjet 960c on any parallel port.  Below that was a box "Selected port window" with LPT1 in the box.  Another box labeled "Available Port Window" has LPT1 in the box.  In the Award BIOS set up I fou... Read more

Answer:printer driver can find the printer on LPT1

The cable will be a standerd USB to printer cable. Windows 98 will not recognize the printer but you can get the driver from MFG site on the internet and then download it.

6 more replies
Relevance 43.87%

I'm new to Win 8 64 bit & managed to load up another HP Netork Printer but the HP 1320 Network Printer is a no go using current HP Help Site Drivers...

Any help is greatly appreciated...

Doug

Toshiba Satellite Laptop
Win 8 64 bit
celetron 1.8 ghz 4 gb ram

Answer:Win 8 64 bit Printer Driver for HP 1320 Network Printer...

Quote:





Originally Posted by artision


I'm new to Win 8 64 bit & managed to load up another HP Netork Printer




Do you mean you installed the Universal Print Driver ?

5 more replies
Relevance 43.46%

Hi Everyone, 

I have a customer who has a Xerox WorkCentre 5890 which is currently installed on a server and shared out .. Normally you just browse out the server double click and it installs , but this I got the following error .. "Printer Driver was Not
Installed Unable to Find a Core Driver Package Site" .. 

I have checked add / remote programs and found no other printer let along Xerox installed .. I have even tried logging into the computer in question as the admin and same error .. I even ran chkdsk, tried to install it by ip address, downloaded
the latest drivers from Xerox and every single time I get that error .. 

The funny part is its only this one computer that is giving me the trouble , all the other computers it install fine with now trouble .. I have ran windows update and all the updates are installed, its running SP1 .. vaild copy of windows .. 

So i am at a lose other ran doing a wipe and reinstall .. Any thoughts ??

More replies
Relevance 43.46%

Hey guys what's up. I searched google and loads of forums and can't find the answer. I have this strange problem with our church's office printer.During installation of  konica minolta bizhub c353 Drivers, software finds my network attached printer, it locates it and shows me the ip address and port number. After installation I try to print to the c353, and it does not print. No error's from win xp and when I open print Que windows and print same document again, I see it's added and then quickly deleted from Que, I check the printer and it's not printed. I tried restarting print spoiler service and no help, I pinged Te printer over cmd and I got replies with 0% packet loss. I also tried prating from different computer on same network with same driver and it printed like a charm. But here is what I also noticed, when add a printer from same manufacturer but differed model and use tcp/ip address to the c353 printer,. And I print a test page or a color document, it prints all black and white. So what happens is when I use a differ en driver from same manufacturer the printer prints without color and I tried alot of models of printers and all printed black and white, but when I use original driver from konica minoltas site I can't print.All network settings are correct on printer and computer. I installed and reinstalled software and driver couple 100's times. And no luck.  Any help is great... Read more

Answer:Printer won't print with correct driver, but prints with diff driver issue.

How many printers and what names appear in control panel "printers" and what if any are "default"? truenorth

1 more replies
Relevance 43.05%

Hello))

I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

Answer:Window 7 64 bit cannot install driver sotware(canon printer driver)

Disconnect and turn your printer off, Uninstall all the printer software, drivers and reboot. Disable any antivirus/antimalware software you may be running and then start the Canon installer again, Do Not Connect the printer until the software asks you to connect the printer and then turn it on. The installer will then search for the printer and will tell you if it finds it. Any antiviirus/firewall or anti-malware software running might block the driver installation so be sure you have turned all of that stuff off

8 more replies
Relevance 43.05%

Hi there,

I am trying to add an Epson XP-610 printer to every endpoints Printer Driver Store in our environment. Does anyone know a way to push a software package in the Print Driver Wizard so anyone can install it at their leisure?


The background of this is that this printer will only work on a specific vehicle that is on a completely different network. Adding it via IP through GPO isn't going to work so I need to stage the drivers and make sure the model appears in this list so individuals
can install it on their own when connecting to the printer.

More replies
Relevance 43.05%

Hello))

I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

Answer:Window 7 64 bit cannot install driver sotware(canon printer driver)

Hi did you try a system restore to a point when it did work.

2 more replies
Relevance 42.64%

I am trying to install Lexmark's universal drivers for my E323 printer. I get to the bit where the install tries to find a printer to create a queue, and then it gets stuck.

If I unplug the printer, delete the Microsoft E323 queue, and then run the Lexmark driver installer again, and if I then get to the page in the installer for finding the printer and connect the printer, there is some brief activity from the installer showing that it has at least seen the printer and is trying to create a queue. However after a couple of seconds I get a notification from the system tray showing that Windows has once again nipped in there and installed its own queue, and the Lexmark driver installation gets stuck once more.

How can I force installation of the Lexmark driver/queue instead of the broken Microsoft driver?

Answer:Can't install Lexmark printer driver because MS driver blocks it

Hello halfbeing and welcome to Seven Forums.

According to Lexmark's compatibility page, the only driver that should be used with the E323 is the Windows 7 OS Driver which should be pre-packaged with the Windows 7 installation media or is available as an optional download from Microsoft or Windows Updates. The Universal Printer Driver doesn't appear to be compatible with the E323.

http://support.lexmark.com/index?pag...erlocale=EN_US

If Lexmark does have a newer driver for your E323, you might be able to find it by following these instructions; especially the part about uninstalling an older driver before installing the newer version.

If that doesn't help there's an email link in the left column here.

3 more replies
Relevance 42.64%

I bought a new PC and want drivers for my old multifunctional PIXMA MP190 - I downloaded the printer driver which is OK - I need the application for scanning and editing documents scanned - this application was included in the initial PIXMA package but I do not have anymore the CD

Answer:mp190 scanner driver have printer driver need scanning one

It's on Pixima's website......http://software.canon-europe.com/pr...

2 more replies
Relevance 42.64%

I am totally weirded out by this. I got a Samsung 850 Evo ssd about a month ago. (I include this because it ?might? cause the problem.) I am running windows 8.1.1 x64.

Last Saturday, I woke up and my computer blue-screened because of a DPC_WATCHDOG something or another. I was able to fix it by updating my GPU and integrated graphics drivers. Yesterday (tuesday), I went to print a document with LibreOffice and it said (copied from a dialog box):
splwow64.exe - Bad Image
---------------------------
C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRV.DLL is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0xc000012f.

Okay, I think, I can print elsewhere. I continue working (still need a solution to this, part 1 of my question is: how do I fix this?).

Here is where it gets weirder, today (twice!) I put my computer to sleep, and when it wakes up, my wifi is gone boom nada. I try toggling my PC into airplane mode. I try turning Airplane mode off, wifi stays off. I try to turn the wifi on.... and it won't turn on . I tried manually dragging it to no avail. I am now assuming this is a driver issue.

Any ideas what could be causing this? I have run a full scan of my AV and am scanning with ESET online, but nothing yet.

Answer:Printer, Display Driver, and Wifi driver corrupted/gone

Well problems went away... still no printer driver.

1 more replies
Relevance 40.59%

I can't seem to get Windows 7 SP1 to load a driver for an HP printer that is on my home network. My laptop sees it but won't let me make it the default printer or load a driver so that I can link to it wirelessly. I restored my laptop back to windows 7
because Windows 10 was moving too slow. I only have 4gigs of memory, and windows 10 probably runs better with 8gigs of memory.

More replies
Relevance 39.77%

I had an old canon printer a couple years ago that I long discarded. I also went through the process of uninstalling the printer driver through the printer section of windows 10 setup as well as uninstalling it through the Canon installed software in the all apps section of windows. I did the best I could to make sure all parts were removed before donating it to a friend. My friend still gets a windows update message indicating that the Microsoft still no longer has an updated version of this canon driver available. To this day, Windows Update still attempts to try to update this ghostly installed driver. Does anyone know where to find this ghostly driver and remove it once in for all? Other than poking around the registry is the only place I haven't tried. I appreciate any advice.

More replies
Relevance 39.36%

From a Windows 7, 64bit PC, I am trying to add an HP LaserJet 5100 printer that is connected to another machine on the network. The other machine's OS is XP home 32 bit. I first try adding a printer from Devices and Printers, choosing 'Add a network ... printer', choosing the printer that I want (hplaserjet5100pcl6 on ...) that pops up on the screen, and after waiting for it to install, get message 'No Driver Found'. I press OK, and am presented with 'File needed...' dialog box. I search around blindly for an .inf files that will work, all of them resulting in "windows cannot locate a suitable printer driver...". The other thing I have tried is going to the HP LaserJet 5100 driver page on the HP web site, choosing the driver page for windows 7, 64bit PC, and, being presented with several choices of drivers, I choose the most logical to me, HP Universal Print Driver For Windows PCL6. I download the .exe file, and then run it. The HP Universal Printing Installer comes up, so I agree to their terms, choose Tradition mode, click Install, and then I go through the same steps as before, Add a network ...printer,etc, finally ending with the same 'No driver found', etc. messages. What else can I try?

Answer:I keep getting "File needed: Printer driver INF ..." No driver found

Hi ciccihal, try going through device manager > update driver> browse my computer and point to where the inf file resides

9 more replies
Relevance 38.13%

Good day all! New to the forum so please bear with me. I am giving my daughter a Lexmark 7100 series all-in-one printer. After some research, I found I had to download the x64bit driver for Vista. I tracked down the appropriate driver on Lexmark website. It is an executeable file. First, is this the correct driver? Second, how do we install the driver on her computer? Do we install via the disc and then click the driver file or install the driver file first then the disc? She has Win7 Home Premium x64. Thanks!

Duckman

Answer:Printer Driver Help

This is what has always works best for me when installing a printer on Vista or Windows 7. I can't say it's the best way and others may find a better way. Before I try to install the printer with a disk or file, I just shut down the computer. I then turn on the power to the printer and insert the USB cord in the computer. When the computer boots up it will tell you that it found a new device. It will detect the device and go on line to find the most recent software and install it. You, of course, have to have an internet connection. I'm not saying that there is no better way, just that it works fine for me.

4 more replies
Relevance 38.13%
Question: printer driver

can anyone help me iam using the lexmark 4200 printer my driver have corrupted so please how can i get original drivers

Answer:printer driver

Lexmark Drivers CLICK HERE

10 more replies
Relevance 38.13%
Question: printer driver

why cant instal cannon image class LBP 6030 printer  for window 7

More replies
Relevance 38.13%
Question: DVD printer driver

I upgraded to Vista 64bit 2 months ago, and I have everything working now except for a DVD printer. It is a Teac P11 and needs a CSQ200 64 bit driver. The company says they can't help. They only configure for 32bit. Is there any way to get a driver that will work?

More replies
Relevance 38.13%
Question: printer driver

trying to install printer driver and it says I don't have suficient rights to the driver install.... Any idea?
 

Answer:printer driver

Are you logged on into an administrator account?
 

1 more replies
Relevance 38.13%
Question: Printer Driver

I just purchased a laptop with W7 and I want to use my HP printer that is connected to my desktop that uses XP. I have connected to the network and W7 sees the printer but says it can't locate the driver. I connected the printer directly to the laptop and it set it up as the default printer and says it has the correct driver and even printed to it while connected. But when I disconnect the printer and put it back on the XP and try to connect to it thru the network the W7 says it can't find the '.inf' file. I know this file must be on the W7 machine since it set the printer up and printed to it when it was connected thru a USB port. It asks for a path to find the driver when I try to connect via the network, but when I do a search for 'inf' files I can't find any. Where is this driver located on the W7 machine?
Thanks for any help

Answer:Printer Driver

Hi merisangel,

In order for us to help you, we'll need to know your full system specifications. Please click "User CP" above, then click "Edit System Spec" and fill out everything as completely as possible. Also tell us what manufacturer and model printer you have.

Cheers,

Walker
Windows Outreach Team

7 more replies
Relevance 38.13%
Question: HP Printer driver

I need the latest printer driver for an HP Laserjet IIIP printer for WinXP. HP doesn't support the IIIP any more. Does anyone know where I can get this please?

Henry
 

Answer:HP Printer driver

HP makes their own drivers, so there won't be any new ones.
 

2 more replies
Relevance 38.13%

I am getting "Printer Driver was not installed-The Specified Print Monitor is un-known" message . Lexmark X1100 Series. Windows XP Pro SP2.
Please Help..

Thanx ..
 

Answer:Need Printer Driver Help

reinstall the printer driver.
three ways:
1. Lexmark website >support>download>printer model etc
2. [my computer(right click)>properties>hardware tab>device manager>printers...>lexmark....>update drivers
3. Lexmark CD, reinstall.

confirm the printer is connected properly, ink levels ok, cables/power ok.
 

10 more replies
Relevance 38.13%
Question: Printer Driver

Hello all.

I just realized that, without thinking about it first; I installed Windows 7 with my printer hooked up and it installed a driver for it with no problem at all. I'm glad, now I know that 7 will install with it hooked up.

It also installed a driver for my 9600GT with no problem.

I think that most of the driver incompatibilities are a thing of the past....








Later Ted

Answer:Printer Driver

Think you're right!

6 more replies
Relevance 38.13%
Question: Printer driver

I have a HP Laserjet 6p printer, my operating system is win server 2003 standard edition. I have been looking for driver for this and the only one I can seem to come up with is Microsoft Windows Server 2003 64-Bit Edition. Will this driver work with the standard edition. I dont want to install it and find out later I have really screwed something up. I this driver will not work does anyone no where I can get one that will work with Microsoft Windows Server 2003 standards edition.

thanx
 

Answer:Printer driver

I'd look for a win200o driver
 

2 more replies
Relevance 38.13%

I bought a new HP Pavilion dv6258se? laptop because I have an urgent need to take it various places to copy some documents. I wanted to use my epson all-in-one printer, CX3810. I was told that Epson is not planning to provided updated vista drivers for this printer. Although they have not discontinued it yet. I also noticed that other major companies, like HP, only have limited printer driver support for vista also. Meaning their upgraded drivers only support printing and not scanning. I have windows XP professional on my desktop. Would it be possible to run it through a usb drive on my laptop? Or do you have any other suggestions? I am not sure if it would be a good idea to run XP on a partitioned system drive.
 

Answer:All-in-one printer driver help?

6 more replies
Relevance 38.13%
Question: Driver for printer

Bought a new PC three weeks ago (with XP) and have successfully acquired the CD for my Brother multi-function printer, but HP don't do one for my 'older' Deskjet 810c. So anyone out there who can suggest a source for a download for a driver so that I can use this printer with XP please.

Answer:Driver for printer

Try the Win 2000 driver that should work with ME and 98

9 more replies
Relevance 38.13%

Hi. I am new to Vista. I used to use the free Fax Printer driver in XP to send faxes directly from any program on PC. Can't find it in Vista. Did MS do away with this feature, or do i have to download it from Windows and install it? If so, where? Or, why did MS do away with this good feature?

I have seen some other posts in this forum on this subject, but they seem to sugggest that now you have to buy a software package to do what you could do in XP automatically by simply using the windows printer driver?

Thanks for your help.

Answer:need fax printer driver

Originally Posted by gupta


Hi. I am new to Vista. I used to use the free Fax Printer driver in XP to send faxes directly from any program on PC. Can't find it in Vista. Did MS do away with this feature, or do i have to download it from Windows and install it? If so, where? Or, why did MS do away with this good feature?

I have seen some other posts in this forum on this subject, but they seem to sugggest that now you have to buy a software package to do what you could do in XP automatically by simply using the windows printer driver?

Thanks for your help.




Welcome to the Vista Forums

I recently bought and installed a multi-function printer, which also has a fax feature. The software (drivers) that came with the printer included the necessary files for faxing.

What kind of printer are you using?

2 more replies
Relevance 38.13%
Question: Printer driver

HiCan anyone help me?I've bought a new pc with XP home installed. I've tried to load our old printer on which is a Epson Stylus 480. A error message keeps coming up when trying to print saying check conection cables which are fine?Any ideas would be great?????

Answer:Printer driver

What U need to do is uninstall the old driver & install the new one from the original disk.No disk, no problem... go to click here and download from there.The setting up is simple.One point though is NEVER plug or unplug any device while PC is 'ON'.Good luck.

4 more replies
Relevance 38.13%

I need help installing a HP Photosmart P1000 on XP. The software/drivers on the CD's don't work. I downloaded the driver from HP (3511_enu_w2k_xp_release), but it keeps saying it doesn't pass the 'windows logo test'. I've seen this problem in other threads, but never really saw a solution. Can anybody please help?

Answer:HP printer driver for XP

There is some interesting reading here for you.........:D

3 more replies
Relevance 38.13%
Question: Printer Driver

I have an Epson C44UX, not that old. I had to wipe out my HD and now I can't find the CD for the printer. I tried getting the latest driver from Epson but the file I downloaded from them is corrupt and doesn't work. I downloaded it twice, just in case it was me. I then tried getting a driver from Epson UK, but that one doesn't work either. Any suggestions? Thanks.
 

Answer:Printer Driver

8 more replies
Relevance 38.13%

Hi, Bought a new mac which I love. Had a HP laserjet printer that I wanted to keep using. Tried to install the driver, didn't work. Now somebody gave me another driver that works apparently  however, my mac won't install it since it says that I already have a driver (a newer version) installed. I want to disinstall the driver to install the one that will supposedly work. However, can find out how to disinstall the first driver. Can anybody help?ThanksM.

Answer:Looking for help with printer driver

It's actually called Uninstall.I'm not really sure with Macs, but I found this:http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00270665&lc=en&cc=us&dlc=&product=79502&rule=7437

7 more replies
Relevance 38.13%

I have an acer aspire r 11 and a kodak easy share 5300 and I cannot seem to get it to function. It only says missing drivers.
 

Answer:Need driver for my printer.

11 more replies
Relevance 38.13%
Question: Printer Driver

Recently after running a hijack this scan i managed to delete a driver used by the printer, by accident...Now everytime i start up the computer a box comes up saying "unable to start HPZipm12.exe" or some words to that effect, i am unsure now what to do as i an unable to print anything, i found the driver on the software that came with the printer but i do not know if it is the right one, and if it is where this file should be in order to start up on start up. Anyone have any ideas?

Answer:Printer Driver

If you go to click here you should be able to download the latest printer drivers for your model.

4 more replies
Relevance 38.13%

I am trying to add a network printer. The printer is plugged into a print server. I have the port all set up, but when I try to select a driver, the right model is not there. There is one for a HP PSC 950 (mine is a 1210). When I tell it to find is on the CD, I get a blank screen and I cannot go on.
If this is confusing, ask and I might be able to be more specific.

How do I get the driver to show up?
 

Answer:No Driver for Printer

You first need to install the port mapped IP address for the print server and then install the drivers. The drivers you are looking for are not in the root folder of the CD for the printer either, you will need to browse to the driver folder on the CD for your particular language. If it is a USB all-in-one printer you may also not be able to use it as a network printer and if you can you will have to install all of the software for the printer.
 

2 more replies
Relevance 38.13%
Question: printer driver

can not install epson 600 on xp using onboard driver please advise regards nigel

Answer:printer driver

you can have a look here click here

1 more replies
Relevance 38.13%

I have a laptop running windows 7, connecting to a remote HP printer shared on a PC running XP. I see the printer but when I try to install it, Windows 7 cant find the driver. I hooked up the printer directly and Win7 installs it perfectly but not when the printer is remote. You can't download a windows 7 driver from HP.

Any ideas?

Answer:Need printer driver for 7

Make and model of the printer?
If Win7 drivers aren't available, you can try Vista drivers in compatibility mode:

Quote:




Compatibilty Mode Driver Installation:
1 - Download the latest driver from the manufacturer's website.
2 - Uninstall the current drivers using the Control Panel...Programs and features...Uninstall a program applet. Then verify that the driver/device has been removed in Device Manager
3 - Right click on freshly downloaded driver installation file and select "Properties"
4 - Select the Compatibility tab - and do the following:
- Click on the "Change settings for all users" button
- Click on the box to select "Run this program in compatibility mode for" and then select Windows Vista Service Pack 1
- Click on the box to select "Run as administrator"
- Click on OK to exit all the dialogs
5 - Right click on the driver installation file and select "Run as administrator"
6 - Let it install and see if that stops the BSOD's.
Also, here's an article on adding legacy devices to Win7: http://technet.microsoft.com/en-us/m.../ee851685.aspx




But, if there aren't Win7 drivers for the printer - then there's no guarantee that it'll ever work with a Win7 system. It may well be that the networking difficulties are the reason that they don't offer a Win7 driver.

1 more replies
Relevance 38.13%
Question: Printer Driver

HELP I HAVE A CANON BJC5100 PRINTER
AND WINDOWS XP
CANON DOES NOT HAVE A DRIVER FOR XP
IS THERE ANY WAY I CAN GET AROUND THIS
AND USE THIS GREAT PRINTER
THANKS WILDBIRD
 

Answer:Printer Driver

From what I gather from searching, an XP driver for that printer does not exist but the Win2K driver will work with some tweaking.
 

2 more replies
Relevance 38.13%
Question: Printer - Driver

AT MY WORK I HAVE A HEWLETT PACKARD LASER JET 3100 AND ONE DAY IT DECIDED TO JUST STOP WORKING. IF YOU PRINT, THE LITTLE DIALOG BOX IS THERE, BUT NO PRINTS COME OUT. OUR IT PEOPLE HAVE BEEN OUT TO TAKE A LOOK AND THEY THINK IT IS SOMETHING TO DO WITH THE DRIVER. THE COMPUTER IS RUNNING WINDOWS 2000 AND THE HP INTERNET SITE IS NOW CHARGING FOR THE DRIVER ON A CD. MY COMPANY WILL ARRANGE FOR SOMEONE TO COME OUT TO TRY AND FIX THE PROBLEM BUT IT WILL COST TIME AND PARTS.

DOES ANYONE HAVE A WINDOWS 2000 DRIVER FOR THIS PRINTER, OR CAN HELP ME?

THANKS, LAURA
 

Answer:Printer - Driver

Well...

In my opinion if it was working and one day it stopped I would say that it is not the driver but possibly...

Has the IT dept. stopped and started the print spooler on the print server ??, or have they turned off the printer and restarted it ??, or have they checked the connections??, or it could be a bad Jet Direct card in the printer...
 

3 more replies
Relevance 38.13%

I have just been given a Brother HL-5130 Laser Printer but do not have a driver for it. I am on Windows 98 can any one help as to where I might find a driver to download Please.

Answer:Printer Driver Help

You can download the driver from here click here

5 more replies
Relevance 38.13%
Question: Add Printer Driver

I have a toshiba Satellite running XP
I am trying to install PDF Converter 3 Professional and it is saying that it can not the AddPrinter Driver. Any suggestions?
Thanks
tony
 

Answer:Add Printer Driver

what rights do you have on the pc?
 

1 more replies
Relevance 38.13%
Question: Printer driver

I did a diagnostic report on my computer and it says a driver is not installed for my printer. My printer prints fine but I'm trying to learn how to scan from my printer to my computer and I think this might be the problem. Do I need to put the original disk for my printer and install it again?? Thanks for the help....

Answer:Printer driver

That'd be best, or get the newest one off the makers website.

8 more replies
Relevance 38.13%

the driver for my epson 600 seems to get lost. when i try to print if gives me 'out of paper' or 'offline' message. everyday. if i reload the software, or 'add hardware', add printer, pick epson 600, and then 'use the current drivers', it then works again for the rest of the day. tomorrow it will be 'out of paper' again. the epson lq850, which i also have, connected to another lpt doesn't have this problem. any ideas?
 

Answer:printer driver keeps going away

8 more replies
Relevance 38.13%
Question: PDF Printer Driver

HiI have just updated my computer system but I have lost some useful things I used to have. Probably a common issue. Prevoiusly I had a PDF printer driver, which I found useful. Predominately I used it for forwarding documents I had scanned and then sent as PDF atatchments in e-mail. If I remember rightly this driver came bundled with some software package. In short does anybody know where I can find such a driver.Yours HopefullyAndyE61

Answer:PDF Printer Driver

Free PDF convertor (acts like a printer): click hereMore features in this prog, but you have to pay for it.... click here

3 more replies
Relevance 38.13%
Question: printer driver

Hi for all,
need to install a printer driver from a cd but have a message : action blocked and have to contact admin. i m the admin and. the pilote is not on Samsung web site. how can unblock the config of win. 10 to be able to insall the driver . thank's

Answer:printer driver

Right click on the setup and choose Run as administrator.

What is your printer model anyway?

1 more replies
Relevance 38.13%
Question: Printer driver

Can anyone please help. I have a Canon Pixma ix6550 printer, and my OS is Windows7 32 bit. My problems I have had the canon driver loaded which is telling me on the test page that everything is fine and the driver is working properly. However when I come to print a page I get nothing at all. Can somebody gice me a siete that is free and trustworhty, I have looked through a lot of the sites and they want to charge. As ever your knowledge and answers are most welcome. Sconedd.

Answer:Printer driver

Are you saying that you have actually printed out the test page and that it prints out correctly but that pages from Word documents or the Web for example do not print? Just want to clear that up before offering any advice.

5 more replies
Relevance 38.13%

please sent to me driver for star lc-20 printer ....... for windows xp or windows 7.0

Answer:driver of printer lc-20

http://www.starmicronics.com/Suppor...

2 more replies
Relevance 38.13%

Hi I'm running windows Me and a friend give us their Hp deskjet 890c printer but their cd won't install the drivers to my windows me computer.I have search for the drivers from Hp. But Hp no longer support windows me or windows 98. So how can I find drivers to install this printer.

Answer:Help with Printer Hp driver

A Google search for "HP Win98 driver" perhaps?http://www.download.com/HP-DeskJet-890-Series-Printer-Driver-Windows-98-/3000-2116_4-1631277.html

1 more replies
Relevance 38.13%
Question: Printer driver

Epson925How can I check the new driver is installed?

Answer:Printer driver

You really need to get into the Printer properties.Right click the printer icon and choose Properties then Advanced, on that page you'll find the driver dialogue, click new driver then Have Disk, point at the software you updated it from and if Windows cannot find a better match you've obviously updated it.It would really help if you let people know which operating system you are using.

4 more replies
Relevance 38.13%

I need to install my Toshiba e studio16 Copier/printer to my windows 7 system. But i do not have the signed driver for windows 7. Can you send me the windows 7 digitally signed driver for Toshiba e studio16 Copier/printer


Best Regards

skice10
 

Answer:Printer driver need

can you find drivers that works in Vista? -then they should work too
 

1 more replies
Relevance 38.13%

Having misplaced/lost the driver CD for Dell 1320c printer ,it should be easy to download the same.
But no this is computering after all, the site lists many versions of the same ,which one is mine? No idea,nothing for it but to download and try one after another.
So I did that,many did nothing.
Then one elicited a response from the printer, it woke up the engine ran,then it went back to sleep.
So any ideas on how to select the right one ?
Dell1320c, direct USB connection to Win XP pro/sp3

Answer:Which printer driver?

I assume you have seen this?
Dell1320c drivers

4 more replies
Relevance 38.13%
Question: Printer driver

Hi guys,


Where to find a correct driver for TallyGericom 9022 printer Win XP please?

More replies