Computer Support Forum

In windows 10 any new lock function or only pin lock

Question: In windows 10 any new lock function or only pin lock

In windows 10 any new lock function or only pin lock

Relevance 100%
Preferred Solution: In windows 10 any new lock function or only pin lock

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: In windows 10 any new lock function or only pin lock

Pin & Windows Hello on upcoming devices that allowing users to unlock their device with their eyes....

4 more replies
Relevance 78.01%

Hello! Since the most recent build of W-10 (9879), my caps lock, num lock, and scroll lock lights do not function on either computer on which I have W-10 installed (a desktop with a USB keyboard and a laptop with an integrated keyboard). The keys still work to correctly toggle the functionality, but the keyboard lights don't work. In case it matters, my keyboard's actual backlights and my mouse's internal light (not the laser, the internal LED) are working correctly, it's just the CL, NL, and SL indicators that don't function.

Anyone have any ideas for fixing this?

Answer:Caps lock, num lock, scroll lock lights no longer function

Welcome to Windows TenForums, Vaindil.

It doesn’t seem to work on anyone’s system and there doesn’t seem to be a fix yet. You can read here into the beginning of the next page if you like.

https://www.tenforums.com/general-dis...tml#post167249

18 more replies
Relevance 88.56%

what to do when a dell latitude d630 laptop is not on but cap lock, num lock and scroll lock is on and i'e tried to check the VGA and the processor

More replies
Relevance 86.92%

I'm using an HP Pavilion dv6000 Notebook series. I noticed that my Caps Lock LED is not working but its FUNCTION is working fine.. same goes with Scroll Lock. Here's the weird part.. when I press Num Lock ( function key + scroll lock ) the LED turns on! I already tried a system recovery, it didn't solve the issue. Is there something wrong with my BIOS? Any help from you guys will be highly appreciated.. thanks!

Answer:Caps lock & Scroll Lock LEDs not working but Num Lock is wor...

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly.  Try performing a hard reset first, if it doesn't work then try updating your BIOS.  If neither works...It's pretty much dead and not worth fixing.  To Perform A Hard Reset Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for  5 seconds)Disconnect the AC Adapter from the notebook.Remove the battery from the bottom of the notebook.  There will be a switch/button to eject the battery.Wait at least 1 minute with all power sources disconnected.Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

9 more replies
Relevance 86.92%

Hi,

how to disable Caps lock, num lock, scroll lock screen messages?



I have desktop pc with two keyboards usb and bluetooth. Also TOSHIBA Bluetooth Stack software, but in device manager: keyboard > hid keyboard device both using microsoft drivers. And I dont have any software installed for keyboards. Also bluetooth has separate system tray indications (it is also disabled) so its not that. I made some googling and found other fix it with Hkey_Local_Machine\Software\Widcomm\BTConfig\General KeyIndication set to 0, but I dont have it in registry. Acualy I dont have anywhere in registry KeyIndication. So any ideas how to disable it? Thanks

Answer:Caps lock, num lock, scroll lock screen messages

Hi,

You'll find that the messages are controlled by a piece of software that came pre-installed on your machine when you bought it. Try looking for a Hotkey managing app to see if the notifications can be disabled.


OS

9 more replies
Relevance 86.92%

For some time now, i have been experiencing that my Num Lock, Caps Lock and Scroll Lock all lights up (not blinking) all at the same time, I tried to google it but i can not find any solutions or explanations for it.

Does anyone know if it is bad? and what is causing this?

I am having a wired keyboard with nothing fancy just a standard issue Logitech keyboard.

Answer:Num Lock, Caps Lock and Scroll Lock all lights up (not blinking)

Can you toggle those functions off, one at a time? Sometimes restarting the computer will use the last state it was in, I'd fully shut down and pull the power cord from the computer and the keyboard cable then put them back and try again.

2 more replies
Relevance 84.05%

Looking for a Free Num Lock and Caps Lock indicator software? Download 7Caps.
7Caps is a very small application that aims to notify you in real time whether the status of the Num Lock or Caps Lock keys changes
Download it from its home page. TrayStatus also lets you enable status indicator for Keyboard keys.

More replies
Relevance 84.05%

The volume is set to 10/10 and I get a lock sound when I lock it using the power button. Does this mean that Touch Lock does not actually lock the phone?

More replies
Relevance 83.64%

Hi,

My errors are a freezing cursor - dead mouse on every other reboot ..and.. With file transfers from one HDD to another I will frequently get a system lockup of Windows (forcing me to reboot. hard reboot). My System is CLEAN of viri and trojan as wella s spyware. I Have WinXP Pro Sp2. Running Zone Alarm Pro v6, Eset NOD32 v2.5, Webroot Spysweeper (for coookies and alt scans), Spyware Doctor v.3.2.1.359 (resident), and Trojan Hunter v4 (also resident on boot). I am also booting and browsing with Pop-Up Stopper Pro. My Hardware? Abit NF7-S rev.2, Athlon 3200 Barton core, Best OCZ 400Mhz RAM (?) - 1Gb in dual channel, Audigy 4 Pro for sound. Latest drivers for all "to best of my knowledge" Any Helpers? :)

*More on the file tranfer lock-ups. The two other drives are Seagate drives and identicle. They're 300 Gb each... I have not reformated them since my last Windows reinstall - they were detected right off.

Could be Windows isnt seeing those drives for what they are?? Even worse, a bus problem?

Thank you in advance.

Answer:Mouse Lock-Up (not there on boot) and Windows Lock-Up Transfering Files HDD to HDD.

have you tryed running safemode? is it the same?
run a chkdsk: start > My Computer > right click the drive u want to scan > properties > tools > error checking - Check Now > put tick in both boxes > click start > click to scedule on next boot > restart

see if it returns any errors or corrects this

3 more replies
Relevance 83.64%

Hi, new to these forums, hope I don't break any rules or anything here.

My laptop is a
Sony Vaio - Model: SVE141R11L
Product name: SVE14135CXB
Pre-loaded with Windows 8 x64
Intel(R) Core i5-3230M CPU @ 2.60GHz
6GB RAM w/ 900GB HDD space
Purchased in Navy Exchange last year (around July 2013)

I have dropped it once or twice from at most a 3ft fall inside a padded case. I mostly use my computer for school work, some gaming, extensive video/photo editing, internet browsing. I've installed some debatable programs but have been installed long ago. Most of my programs included Microsoft Office, Adobe suite, Steam, iTunes, uTorrent, McAfee VirusScan Enterprise, Winrar, VLC, etc. But are now gone due to the refresh I had just done last week for prior problems, but still experience problems.

I recently been having issues with my computer where it just won't respond at all. Like today, I had it working for a few hours, but then went out and left my laptop on the lock screen, and came back to it being completely stuck. Completely stuck as in, no keys or clicks would unlock the screen to the login prompt. However, my cursor was fully able to move around the screen, and my caps/num lock buttons work as they display the lights enabling/disabling them. The time when it was stuck was 8:03pm, but the clock was stuck on 7:55. But on the bottom of the front of the laptop, the HDD orange light is not lit up at all, which I believe suggest that the HDD is not reading/properly reading. Oddly e... Read more

Answer:Windows 8 Lock Screen Stuck, Cursor/num/cap lock work

Sounds like one too many drops killed the computer. You may get lucky and find a local mom & pop shop that will fix it cheaper then Sony.

3 more replies
Relevance 83.64%

Not a techie.  Can't get straight answer ANYWHERE.  New laptops tend to NOT have indicators on the keys.  Hoping Windows 10 has indicators that can be turned on and PROBABLY would show up in the tray at the bottom right of the screen. 
I have heard of sites where such things can be downloaded but again NOT a techie, so I hesitate to go outside of Windows/Microsoft for downloads.  I do not know what download sites are safe or spoofs.

Please plain English ... i.e. go to settings etc.  Or just give me a Microsoft approved site for download.
Dez/MJD

More replies
Relevance 82.82%

How do I remove the Caps and Num Lock indictor for a Lenovo G50, that is running Windows 10?

Answer:Remove Caps lock/Num lock indicator? (Windows 10)

Hi Thisismyname01 ,
 
 
Welcome to the Community Forums. 
 
On a similar G50 , this was resolved by uninstalling Energy Management .
 
Another steps that was advised :
 
1. Opening Control Panel >Program and Features>Uninstall a Program and look for Caps OSD or Lenovo OSD 
 
2. On the display properties of the graphic card , you may also configure to "Show indicator for a few seconds" . 
 
3. Disable hotkeys from the BIOS ( but this may change all other usable hotkeys ) . Lets's reserve it a last option. 
 
Update us what works for you.
 
 
Regards,

1 more replies
Relevance 79.13%
Question: Function Lock Key

I have recently bought my Lenovo u410, and I seem to have a problem. The media and f1, f2, f3, and etc. keys are on the same keys, and this is where my problems arise; I play games on the computer and I use f1, f2, f3 keys while playing these said games. Whenever pressing the function keys, it instead recognizes it as a media key, and I'm forced to press Fn + F# and this is quite annoying. This is a Windows 8 computer and the BIOS does not have the setting to turn on Fn Lock and there is no Function Lock key anymore. Help!













Solved!

Go to Solution.

Answer:Function Lock Key

Good day and welcome to the community.
 
Have a quick look at: http://service.lenovo.partner-management.com/content/CoursewarePublic/15415/U310_BIOS.swf
Specifically the Configuration tab and the Hotkey Switch item. I believe that in Legacy Mode this will switch the F keys back to standard F1, F2, etc.
 
Regards.

2 more replies
Relevance 79.13%
Question: Function Key Lock

To change the brightness on my T430, I need to press the FN key + F8/F9, is there any way to lock the FN key so that if I want to change brightness I just have to press F8/F9? Sorry if this has been asked before but I tried searching to no avail.

Answer:Function Key Lock

'afternoon.
 
disclaimer: these steps work on my X220. your T430 BIOS screens should be largely similar if not identical.
- boot to your BIOS and select Keyboard/Mouse from the Config menu.
- toggle Fn Key Lock to Enabled.
- save and reboot.
 
in Windows now, you'll be able to press the Fn key, release, and press the desired Fx key. ie no need for Fn+Fx key combo'ing. by pressing Fn twice it locks the effect for the current Windows session. now, pressing the Fx key does not require any Fn key-press. it just executes the function.
 
note, though that the Fn key double-press lock effect doesn't survive a system reboot. I haven't tested whether it survives system standby or hibernation.
 
hth a bit.

3 more replies
Relevance 79.13%

On my task bar I used to have visual aids to see when cap locks etc was on or off, now they have dissapeared?It is a pain when entering passwords with caps and lower case.Can anyone tell me how to turn them back on please?

Answer:CAPS LOCK, NUM LOCK, or SCROLL LOCK

Doesent caps lock light come on when you press Caps Lock?

4 more replies
Relevance 78.31%

I recently upgraded to Windows 8.1, but it reset my custom lock screen image.  I tried re-applying it but the lock
screen preview in the settings is stuck on a load loop.  Does anyone know why that is and why it won't set my custom image as the new lock screen image?
i can't find the  C:\ProgramData\Microsoft\Windows\Systemdata, folder,
in my laptop
how to get default lock screen images in 8.1? plz help me..

Answer:Lock Screen Custom Image Stuck on Load for Windows 8.1, (Can't see the default lock screen images)

Please take a look at this link and it should solve your problem.
http://www.eightforums.com/tutorials/29621-start-screen-set-default-background-image-windows-8-1-a.html

12 more replies
Relevance 78.31%

Any solutions....??? The task bar (windows xp) on my computer is stock on lock, I used malwares antimalware, spybot, avast, avg, security essential from MS nothing works...I don't want to re-format my hard drive, only as last resort.

Answer:windows xp taskbar is lock on lock

Right Click a blank area of the Taskbar,then click "Lock Taskbar", to remove the check mark.

2 more replies
Relevance 78.31%

Hi, here comes clumsy I. So I'm in the middle of formatting my computer, and I want access to the BIOS-panel. But for some weird reason, the FN key doesn't seem to do anything anymore. Despite the fact that it had worked quite fine up until now. Have I toggled some sort of FN-lock? The computer is less than a week old.  Thanks.

More replies
Relevance 78.31%

I am trying to access my Boot Menu. I have a Gigabyte Mobo, so the access is F12. Or Delete for BIOS. When I start the computer, and the screen comes up to select, they don't work. I did some research and it appears my FN keys may be locked. How do I unlock them? And is my assumption correct? Is that the reason they don/t work?

These are the options when my computer boots.

BIOS-Delte
BIOS Setup-QFlash
System Info-F9
Boot Menu-F12
END-QFlash

My keyboard is a wireless Logitech K520 with Unifying USB

Answer:How do I turn off FN (function) lock?

Originally Posted by therealsimpsons


I am trying to access my Boot Menu. I have a Gigabyte Mobo, so the access is F12. Or Delete for BIOS. When I start the computer, and the screen comes up to select, they don't work. I did some research and it appears my FN keys may be locked. How do I unlock them? And is my assumption correct? Is that the reason they don/t work?

These are the options when my computer boots.

BIOS-Delte
BIOS Setup-QFlash
System Info-F9
Boot Menu-F12
END-QFlash

My keyboard is a wireless Logitech K520 with Unifying USB



Tell us what that screen is you are calling "select", please. If it's the Windows Boot Menu screen with the OS, you're way past the POST BIOS operation and the F12 will have no effect. You need to rapidly tap-tap-tap the F12 FN key as the BIOS is coming up, before it gets to the point where it hands over to Windows. Just explain a little more what that screen is. Thanks.

more replies
Relevance 78.31%

I am trying to access my Boot Menu. I have a Gigabyte Mobo, so the access is F12. Or Delete for BIOS. When I start the computer, and the screen comes up to select, they don't work. I did some research and it appears my FN keys may be locked. How do I unlock them? And is my assumption correct? Is that the reason they don/t work?

These are the options when my computer boots.

BIOS-Delte
BIOS Setup-QFlash
System Info-F9
Boot Menu-F12
END-QFlash

My keyboard is a wireless Logitech K520 with Unifying USB

Answer:How do I turn off FN (function) lock?

Originally Posted by therealsimpsons


I am trying to access my Boot Menu. I have a Gigabyte Mobo, so the access is F12. Or Delete for BIOS. When I start the computer, and the screen comes up to select, they don't work. I did some research and it appears my FN keys may be locked. How do I unlock them? And is my assumption correct? Is that the reason they don/t work?

These are the options when my computer boots.

BIOS-Delte
BIOS Setup-QFlash
System Info-F9
Boot Menu-F12
END-QFlash

My keyboard is a wireless Logitech K520 with Unifying USB



Tell us what that screen is you are calling "select", please. If it's the Windows Boot Menu screen with the OS, you're way past the POST BIOS operation and the F12 will have no effect. You need to rapidly tap-tap-tap the F12 FN key as the BIOS is coming up, before it gets to the point where it hands over to Windows. Just explain a little more what that screen is. Thanks.

3 more replies
Relevance 78.31%

When I right click my desktop and go to personalization then click "lock screen" nothing happens and it freezes on background. I have to close out then start over to use other functions. Can anybody help me ? Running Windows 10.

Answer:Lock screen function

Are you running the latest version of Windows?
10586.104?

1 more replies
Relevance 78.31%

When I right click my desktop and go to personalization then click "lock screen" nothing happens and it freezes on background. I have to close out then start over to use other functions. Can anybody help me ? Running Windows 10.

Answer:Lock screen function

Are you running the latest version of Windows?
10586.104?

1 more replies
Relevance 78.31%

Hello, Today I found out there is a way to lock the Fn key in the BIOS which allows you to control the media keys on the double function F3-F12 keys, I thought this was a great feature and so I enabled it. Unfortunately it seems that I am unable to type as long as Fn lock is enabled, volume control also doesn't work. I have to press Fn twice for the keyboard and volume buttons to start responding again, but then Fn lock is disabled again. Is there a way to have Fn lock function without the rest of the keyboard losing its function? Because right now, using the media keys is more cumbersome than it was before while I thought it should have made it easier. Any suggestions?

Answer:Fn lock function on T430

Hi, erceve
 
Yes, this should be possible. There are two possible settings for the Fn key: Legacy and Standard. Legacy Mode works in the traditional sense. The secondary key functions become usable when the Fn key is pressed. Standard Mode takes the approach where the Fn key enables the function keys (F1-F12.) In this mode the function keys become the secondary, not the primary, functions. To enable this, I would disable the Fn Key Lock in the BIOS and then boot as normally. When in Windows, hold the Fn key for about ten seconds. A menu should appear that will allow you to switch the Fn key behavior. 
 
Hope it helps,Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

8 more replies
Relevance 77.49%

i enter 840g3 uefi and try to set the drive lock function to my 2 SATA ssd.but it shows"cycle power manager the disk, you cannot change it."what's the meaning and how to configue drive lock?

More replies
Relevance 77.49%

Please Help i'm really trying to switch my function keys to the standard f1-f12 buttons and i cant figure out how to switch it to such... ive been to my bios screen but there isn't an option that states a fn switch of somesort... ive been searching the web for answers but so far no luck i hope someone here can  

Answer:Function Lock Key ideapad z400

hi Synx,
 
Welcome to the Lenovo Forums.
 
The Lenovo Z400 here on the lab doesn't have the keyboard remapping feature on the BIOS unlike other units, however, using an app called SharpKeys enables me to change the Mute Key (Fn+F1) to a regular F1 key.
 
Give it a shot - Map Any Key to Any Key on Windows 7 / XP / Vista (works also in Windows 8)
 
 
 
Hope this helps

9 more replies
Relevance 77.49%

Hi
May I know is there the function that double tap on the nav bar to lock the screen? Like in the Lumia 640.

Answer:Do Lumia 930 has the function to double tap the nav bar to lock?

The 930 has no navigation bar to double tap. It has actual dedicated keys.
So no.

2 more replies
Relevance 77.49%

Hi guys. My Windows 7 laptop crashed and the information on the hard drive was restored from back-up. Now I'm trying to get back full functionality as before.

I value being able to hear when I have turned on or off (sometimes accidentally) things like Caps Lock and Num Lock.

I went to the Ease of Access Center and ticked the box for turning on Toggle function (then hit Apply).

But I still am not getting a beep for Caps Lock (etc.), on or off.

What's my next move please?!

Thanks - Ken18

Answer:Audible Caps Lock won't function

You hit apply and hopefully OK next also. Then reboot.

2 more replies
Relevance 77.49%

I just purchased the Yoga and I need to use Excel all the time for work, which requires constant use of the Function keys 1-12.  I want to lock my function keys and I have been going crazy trying to figure out how to do it on Windows 8.  I spent about 4 hours trying to do it.  Can someone please help me?

Answer:Yoga (Lock) Function Keys- Help!

Shutdown, press NOVO button and select BIOS Setup, switch to 2nd page, disable Hotkey Mode





------------------------------------------------------------------------How to get BIOS version: Windows key + R --> cmd --> wmic bios get smbiosbiosversion

2 more replies
Relevance 77.49%

Hello,I would like to persistently lock the function keys at my E531 laptop. I know you can switch between function keys and multimedia functions by setting FnLock (Fn+ESC), but unfortunately this setting is volatile: everytime I restart the system (even from power saving mode), it is lost and the keys default to multimedia again. Using this laptop only for "real work", with software that extensively uses the function keys, this is really getting on my nerves...  Is there any way to persistently lock the function keys to generate F1..F12 keycodes?If I'd ever need the multimedia functions, I'll luckily hold down the Fn key before... OS is Windows 8.1. Thanks for any help,Tilmann 













Solved!

Go to Solution.

Answer:Persistently lock function keys!?

Hi Tilmann,
 
Welcome to Lenovo Community Forums!
 
To use the function keys to enable the standard functions instead of multimedia functions, go to BIOS by tapping F1 when system starts. Under config tab, go to keyboard/mouse. Change F1-F12 keys to legacy mode. Save and exit BIOS by pressing F10.
 
Hope this helps!
 
Best regards,
Mithun.





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Relevance 77.49%

Hello all,

Stayed up way to late watching the election last night....

I can't get my brain around how to limit the size of a sum function. I'm using the following function to count back YTD but I want to limit it to only 12 months back from the absolute reference ($C$9), which is a drop down, because of multiple years of data:

=SUM(OFFSET(C2,0,0,1,MONTH($C$9)))
Should I be using this way or using another function?

=SUM(C2:INDEX(C2:Z2,12)
Thanks!

LDP Analyst
 

Answer:Brain Lock on Sum of set Dates Function

7 more replies
Relevance 77.49%

Hey there! I recently purchased an L450 (model 20DT001DUS Windows 7 Professional) that has an issue with the functionlock, as it's reversed. The indicator (on the individual key) is lit, along with the on-screennotification, but the laptop behaves as if it were not locked. The opposite happens as well, where itappears unlocked but behaves like being locked. I also had dealt with an E450 (running W7 Pro as well) thathad the exact same problem (out of the box, too). It's just quite frustrating at the moment, and any advicewould be appreciated.As a side note, the option of using legacy keyboard functionality (within Windows) and all that doesn't fixthe issue, unfortunately. It simply reverts after the laptop turns off.Thank you! 

Answer:L450 Function Key Lock Backwards

Not sure if it helps, but these are my options in the bios. They don't seem to alleviate the problem.  http://i.imgur.com/bc0ckUD.jpg

1 more replies
Relevance 77.49%

On the T440 the function lock has to be on for the F1-12 keys to function normally, otherwise they work as their special function.  This is opposite conventional function locks where normally the user must hold Fn and press F# to make the special function happen or they enable function lock and can press the F# keys to get the special function. I have found othre threads that point to a BIOS update that allowed the conventional/standard way of doing this to be enabled but I just updated to the latest version 2.27 and it does not have the Hotkey swap option in BIOS or in windows mobility center. Here are 3 similar threads but for different models.https://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Function-Lock-Key/m-p/1096829#M86625https://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Is-there-a-way-to-reverse-the-Function-Fn-...https://forums.lenovo.com/t5/Lenovo-3000-and-Essential/G400s-G500s-How-to-swap-FN-keys/ta-p/1312569 Can there be a BIOS update issued for the T440 to enable this functionality?

Answer:T440 Function Lock Reverse

Hi Hellgiver,
 
Welcome to Lenovo Community!
 
As per your query we understood that you are facing the issue with keyboard function keys on ThinkPad T440.
 
To resolve the issue I suggest you to check with pressing Fn+Esc key on the keyboard to change the setting.
 
Hope this helps. 
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Relevance 76.67%

HelloAfter updating the Yoga 3 Pro with the files listet on Lenovo site:(http://support.lenovo.com/us/en/products/laptops-and-netbooks/yoga-series/yoga-3-pro-1370-laptop-len...the Keybort will not accept "caps lock" anymore, i need "capslock" to unlock my Harddisk... external Keyboard has also no "capslock" function Operating System ; WIN 8.1Lenovo Yoga 3 Prothanks for any suggestions

More replies
Relevance 76.67%

How do I lock the function keys on my new Spectre x360?

Answer:How do I lock the function keys on my new Spectre x360?

Hello, here is the solution for your question, http://h20435.www2.hp.com/t5/The-Next-Bench-Blog/HOW-TO-Disable-The-Fn-Function-on-HP-Laptops/ba-p/7... #hpexpertday




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

1 more replies
Relevance 76.67%

I have to keep pressing the fn key to use f2 etc.I would change it in BOIS but I can't seem to get to it, I'm guessing because the f keys are actually functions at point of boot up.Any ideas on how to get into BOIS?.ThanksIggy.

Answer:HP Pavililon function lock key change and getting to BOIS

Immediately after powering on start tapping the Esc key. This will bring up a menu where F10 to enter BIOS is an option. Does that work to get into BIOS?

1 more replies
Relevance 76.67%

Hello,

it appears to be problems when I lock my computer. When I start typing my keyboard is completely broken. I'm not sure about what the problem is, but it seems all the meta keys have gone bananas. In Linux I would simply solve it by pressing all the Metas like ctrl, alt etc, but this doesn't work here.

So, right now; Screen Lock is the same as Reboot computer. Do you have any advice for me?

Thanks.

More replies
Relevance 76.67%

Trying to use the F1-F12 keys w/o holding down the "FN" key.Tried FN+ESC key together but does not change the action, always set for the multi-media functions ? Can it be changed in the "BIOS" ?

More replies
Relevance 76.67%

After calling up the list using ctrl alt delete I check Lock. Everything was fine for a few weeks but now I hear the computer going out of lock mode at least once every forty-five minutes.I turn on the monitor and the sign in screen is up instead of the no signal advisory. After a short while the function kicks back in.

Should I stop trying to keep the computer in Lock? I've been advised by some never to turn the computer off and keep it in Lock mode when not using it. I prefer having everything loaded up so I don't have to wait between five and ten minutes for everything to load up. I just want to make sure I'm not harming my computer.

Thanks.

Answer:lock function is on but computer continues to start

Um... You seem to be confusing Lock mode and Sleep mode. Locking your computer is not by itself supposed to put your computer into Sleep mode. It is perfectly normal to see the sign in screen when your computer is Locked. Whether a locked computer will go into Sleep mode by itself depends on your Sleep settings, which is a separate issue.

If you don't want your computer to stay on all the time, then a good idea would be to put your computer in Sleep mode when you are not using it. Note: Sleep mode, not Lock mode.

2 more replies
Relevance 76.67%

i hope anyone can give me a solution.............. if i play games i dont use the touch pad... but i do use the keyboard.... i would like to turn it off but the function keys wont work................ the other keys seems to be ok.... any suggestion?

Answer:my function key to lock my touch pad doesnt work

 
Hi
 
Welcome To Lenovo Community
 
We are really sorry to hear about the issue you are facing,  
Based from what i read in your post, seems like your hotkey drivers are not working
Please try installing Lenovo Energy Management drivers from the support website
Restart the system and check
 
 
Do give this a try and let us know  
 
 
 
Hope This Helps
Cheers!!!
 
 
 
------------------------------------------------------------------------------------------------------------------------------------------------------------WW Social Media Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!How to send a private message? --> Check out this article.
English Community   Deutsche Community   Comunidad en Español
 

1 more replies
Relevance 76.26%

When i try to wake my phone up, it shows "resuming" for two or three seconds and then displays the lock screen. Is anyone else facing this issue ? Is there any solution to this problem ?

More replies
Relevance 76.26%

I'm using Ideapad Y570 and I've found that My Caps lock,Num lock & Hard disk drive indicator didn't work, while other indicators work properly. Does anyone have some solution for this problem?
 
 P.S. My O.S. is Windows 7 64 bit
 
Thankyou
 
posts merged 













Solved!

Go to Solution.

Answer:My Caps lock,Num lock & Hard disk drive indicator aren't work

Anybody knows? Please Help

9 more replies
Relevance 76.26%

id like to know if I can create a lock screen when my computer boots up to completely lock it from a very advanced user? Or any other ideas would be great. I'd like to know when im not home my computer is completely locked from my very spying boyfriend! I live alone, but sometimes he's here while im working. Im using windows 7 home premium. Thanks ahead of time for any ideas
 

Answer:would know if ican setup a lock screen wheny computer boots up to completly lock it .

Re: would know if ican setup a lock screen wheny computer boots up to completly lock

Don't log in :-D

Use a very difficult password. We have plenty of password generators on majorgeeks.
Enable the system admin account and password protect it.
Those two are probably enough. How advanced is he?
 

9 more replies
Relevance 76.26%

I was on my Y560 Model 0646 checking my email and the computer shut off on me.  I went to turn it back on and it does not turn on.  The caps lock and number lock light up.  Blue tooth, Battery, and Video status all light up above keyboard in status area.  None of the fans are going, and it does not sound like anything is running.  I tried removing the power and battery and pressing power button a few times.  Also tried to remove power and battery and holding down power and nothing.  It's almost like it freezes.  I can push the mute button and it lights up, but then cannot turn it off.  Please help.  Laptop just went out of warranty last month.

Answer:Y560 will not turn on. Caps Lock and Number lock light up but not fans or boot

I'm guessing it is because of the motherboard. Since it is out of warranty can a Y560 motherboard be purchased anywhere? Any ideas? Please help.

7 more replies
Relevance 76.26%

While following instructions in manual, it tells me I need a lock code. Where can I find it?
"Lock Mode
When the phone is in Lock Mode, restrictions are placed on phone use. You can
receive calls and messages, but cannot place outgoing calls (except for emergency
numbers) until you unlock the phone. Lock Mode also restricts access to menus and
the volume key. Your phone’s Lock Code is required. To access Lock settings:
From standby mode, press Menu ? Settings ? Phone Settings ? Security ? Lock
Phone."

Answer:SAMSUNG R451c Lock Mode Cannot find my phone’s Lock Code.

Isn't it a (4 digit?) code that you create yourself, or is there a default code already set?

2 more replies
Relevance 76.26%

I went into Ease of access center, Make the keyboard easier to use, and turned on toggle keys to make sounds when I hit these keys - Caps lock, Num Lock and Scroll Lock - but I get no sound when I hit any of these keys. What is the problem?

Answer:toggles keys selected to make sounds for Caps Lock, Num Lock

is the system volume up

Check Toggle Keys and hit apply

6 more replies
Relevance 76.26%

My Toshiba satellite c650d seems to have power...the on button is green. The screen is black, the numbers and caps lock lights are on and wont go off. The disk drive makes the usual booting up noise but that is all she does. Ive unplugged and removed the battery and that did nothing. I cant even turn it off with the on/off button to remove that battery and then turn it on again. I removed and reinserted the memory (both) and I can't take the hard drive out, its held in by a screw. Is my "friend" dead?

Answer:toshiba satelite c650d caps lock light, number lock is on an

If, as it sounds, it is booting up but not ever displaying anything on the screen, check the cable between the motherboard and the screen. It might just be one of the connectors (at either end) has worked loose. With the computer well booted up, move the screen gently down to nearly closed. If you ever see anything on the screen then it could be the cable is faulty where it hinges.Always pop back and let us know the outcome - thanks

2 more replies
Relevance 76.26%

I have a Ideapad Y560P that shut down suddenly and when we tried to turn it back on, the Caps Lock and Num Lock (on F8 key) lights go on but the computer does not start. I saw a similar thread from 2010 but there was no resolution. I assume that the two lights on at the same time at attempted start indicate some kind of "fault" condition in the computer. I have not been able to get the bios to start so that I could run diagnostics. I pulled the battery and held down power for 30 seconds, pressed start twice, put the battery back in but still won't start. I pulled memory out, trying to get a POST "beep" error but that didn't occur. I put memory back in one dimm at a time. I pulled the Hard Drive out and put it in an external enclosure and was able to extract the information to another laptop so I'm pretty sure I didn't have a hardware Hard Drive failure. Other than the one reference in this forum I haven't seen any information about this kind of, what I assume is a, hardware failure. I assume that Lenovo has some kind of guide that tells them what the lights mean. The computer was about six months out of warrenty when it failed. I called Lenovo to attempt to extend the warranty but they won't once it is out of warranty. Looking for some idea of what failed, whether it is worth getting one of Lenovo's listed companies that repair laptops to look at it and fix the problem.













Solved!

Go to Solution.

Answer:Lenovo Ideapad Y560P Will Not Boot. Caps Lock and Num Lock lights on.

MiKershaw wrote:I have a Ideapad Y560P that shut down suddenly and when we tried to turn it back on, the Caps Lock and Num Lock (on F8 key) lights go on but the computer does not start. I saw a similar thread from 2010 but there was no resolution. I assume that the two lights on at the same time at attempted start indicate some kind of "fault" condition in the computer. I have not been able to get the bios to start so that I could run diagnostics. I pulled the battery and held down power for 30 seconds, pressed start twice, put the battery back in but still won't start. I pulled memory out, trying to get a POST "beep" error but that didn't occur. I put memory back in one dimm at a time. I pulled the Hard Drive out and put it in an external enclosure and was able to extract the information to another laptop so I'm pretty sure I didn't have a hardware Hard Drive failure. Other than the one reference in this forum I haven't seen any information about this kind of, what I assume is a, hardware failure. I assume that Lenovo has some kind of guide that tells them what the lights mean. The computer was about six months out of warrenty when it failed. I called Lenovo to attempt to extend the warranty but they won't once it is out of warranty. Looking for some idea of what failed, whether it is worth getting one of Lenovo's listed companies that repair laptops to look at it and fix the problem.HiIn my experirience, these two lights don't mean anything specifically.The only good and co... Read more

3 more replies
Relevance 75.85%

Is it possible to force the function lock key 'on' during boot-up with a wireless keyboard

Answer:winxp force function lock wireless keyboard

Ripped from another site:The new Microsoft keyboards assign actions such as Save or Open to the function keys. To enable the default functionality of a function key without performing the action that Microsoft has assigned to the key, you must press the Function Lock key before you press the function key. Unfortunately, the new keyboards don't contain a programmatic way to set the state of the Function Lock key. Therefore, you can't configure the keyboard to enable the Function Lock key by default; you must press Function Lock every time you start your machine.

3 more replies
Relevance 75.85%

Hello comunity, I have few problems with my new T540p Laptop.  First problem:After rebooting system are multimedia keys active (F1=mute, F2=volume -, etc...) but I need clasic function keys (F1, F2, F3... Unfortunately I am not able to to permanently swap it. I can only pres Fn+Esc - but it is until notebook is rebooted. I read, that there should be possibility to change it in BIOS, but unfortunately I dont have option to change it inmy version of bios. Is there any chance to do it by another way? (Some utility/software/register modification etc?)I am really upset about locking Fn all the time.  Second problem: I nstalled Hotkey Features on my laptop. Everything works fine, but NumLock ON signalization is allways visible. Once I turn off NumLock, it dissapear whitin 5 sec. I believe, that this permanet signalization is becouse of models WITHOUT numeric keyboard, so there was necessary to make this signalization permanent.Is any way, to remove thos signalization? Thanks for your reply.













Solved!

Go to Solution.

Answer:T540p - How to set function keys to Standard F1-F12 and Num-Lock signalization

Are you running Win7 or Win8?
 
For the first problem, BIOS itself should remember the last state of Fn-Lock, and then restore it after shutdown/reboot.  Are you sure you're using latest BIOS?  
 
For the second problem, are you using the latest version of hotkeys?
 
T540p driver matrix (to find the latest versions of BIOS and hotkeys):
http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS038410

2 more replies
Relevance 75.85%

My friends dv7-1135nr is not posting. The num lock and caps lock led light will flash once every 2 seconds at the same time. According to HP this issue is a " not functional" cpu. I am ordering another cpu for 16.00 off ebay because this is cheaper opposed to ordering another board. Anyone else have this issue? And if so did you fix it ?
 

Answer:dv7-1135nr black screen caps lock/num lock flashing

6 more replies
Relevance 75.85%

I have G500 laptop running windows 8.1 64 bit.  I have noticed that there is no indicator light for when num lock is on.  The light on the front of the computer under the touchpad comes on when caps lock is active, but not for num lock.  Is there any indicator for num lock on this computer?

Answer:G500 indicator light works for caps lock, but not for num lock

Hi Kimikat730,
 
Welcome to Lenovo Community!
 
I?m sorry to inform you that there is no other indicator in G500 Laptop for Num-Lock key.
 
Do post us back for further queries.
 
Best Regards

Shiva Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 75.85%

I have a Satellite C660 which was working fine this morning. When I returned from work and powered it on, the entire keyboard is not working and therefore cannot enter my login details.
The Num lock and Caps lock are lit.

Any ideas on how to resolve this?

Answer:Satellite C660 - keyboard is not working but Num lock and Caps lock are lit

Hi

Are you able to disable the CapsLock and NumLock?
Can you access the BIOS pressing F2 while powering up the unit?

If this does not work, I would recommend checking an external USB keyboard.
If the USB keyboard would functions, then this means that the internal keyboard is faulty and needs to be replaced.

3 more replies
Relevance 75.85%

Hello guys,

I recently upgraded to Windows 10 and I am having some issues.

First one is: When I click jpg, gif, or any image files that uses the photo viewer as a default viewer, photo viewer pops up twice, one with the file I selected and one with the collection screen. It only does this on the first view of a image file after reboot. Once it does this, it doesn't do it until I reboot.

Second one is: I use a PIN as my login password. The number lock on the log in screen doesn't work. I almost always have to press NUM Lock button in order to use the number key pad. I checked the BIOS setting and Num Lock is on.

I will be appreciate any help.

Answer:Photo viewer pops up twice and number lock doesn't lock on log in

skyblue said:

Hello guys,

I recently upgraded to Windows 10 and I am having some issues.

First one is: When I click jpg, gif, or any image files that uses the photo viewer as a default viewer, photo viewer pops up twice, one with the file I selected and one with the collection screen. It only does this on the first view of a image file after reboot. Once it does this, it doesn't do it until I reboot.

Second one is: I use a PIN as my login password. The number lock on the log in screen doesn't work. I almost always have to press NUM Lock button in order to use the number key pad. I checked the BIOS setting and Num Lock is on.

I will be appreciate any help.



You've posted 2 different problems that should have been separate posts. I don't have a solution to the first but the second is probably because the keyboard driver has not yet loaded before getting logged in. I saw the same during setup of a new ASUS Notebook just yesterday that came with Win8.1. Disconcerting was the lack of a light or screen indication that the NumLk key had been pressed, just noticed the same is occurring on my Dell Inspiron 15R that has been Upgraded to Win10 although it is a rescued/rehabbed Notebook, it does have the light on the front edge of the case, just does not turn on.

1 more replies
Relevance 75.85%

My recent purchase of the above All-in-One PC (running on Windows 10) included the Lenovo SK-8861 keyboard which has no lights for the CAPS LOCK and NUM LOCK keys. How do I get them to be displayed on the screen when pressed? When I went into Display Settings in Control Panel, I could not find the option to set them on or off.  so, based on the instructions on https://support.lenovo.com/gb/en/solutions/ht002122, I installed the Hotkey driver from http://support.lenovo.com/gb/en/downloads/ds031814.  When I now go into Advanced Settings under Display Settings and click on Screen Configurations, I can see the Enable on-screen display checkbox and the Appearance settiings but the expected Indicator Settings for NUM LOCK and CAPS LOCK aren't being displayed as expected. Can anybody advise what I need to do to enable these settings? Lenovo On-Screen-Display is listed under the Installed Programs in Control Panel. Many thanks.      

Answer:Displaying the CAPS LOCK and NUM LOCK indicators on the Lenovo AIO 510 Ideacentre

I do not have an answer for how to enable them via the control plane, but I can point you to a free tool called Keyboard LEDs that I have used in the past that when installed will put an indicator in the system tray, and will sound a tone  and display on screen if so configured in its settings.. Cheers,   

1 more replies
Relevance 75.85%

i recently encountered a small problem with the onscreen display when trying to turning some functions on and off. i've noticed that when i tried to turn caps on, it does not display the "Caps On" on the lower right bottom of the screen. i just want to know if anyone have encountered this problem or could solve it. as an obseravation, i noticed that the display disappeared ever since i install word 2003. thank you.





Thinkpad X61: 7675-CTO, T7500 NV, 1GB RAM, 120 HDD, 1GB Turbo Memory, VIsta Business

Answer:Onscreen display not working for Caps Lock or Number Lock

Hi ! Same for me, but LED is ok for me.  





Thinkpad X41: P M 778(1.6GHz), 1GB RAM, 60GB HD, Intel 900, Intel 802.11abg wireless, Bluetooth/Modem, 1Gb Ethernet, Secure chip, Fingerprint reader,X4 UltraBase + CDRW/DVD, WinXP Pro

6 more replies
Relevance 75.44%

Well, I have no idea what caused this but the tablet buttons (even the on/off button) the lights for caps lock and scroll lock as well as the automatic screen orientation change when I flip it to be a tablet have stopped working.Also the screen does not turn off anymore when the lid is closed. Reinstalled pretty much all of the drivers, no effect.Any ideas? Is this thing already broken?

Answer:X41 tablet buttons + scroll lock and caps lock lights + screen orientation change stopped working!

well, SOMETHING is broken.. though it would seen unlikely it is hardware.. a question: did you load anything new just before this happened..?anything at all..scanner drivers or printer drivers or a new application..? OH!, welcome to the lenovo community..! 





Bill Morrow, kept by parrotsSysop - forum.thinkpads.comX300, T60p, X60s,X60T (sxga+), Transnote, MacBook Pro, iPhone, iPod----She was not what you would call refined.She was not what you would call unrefined.She was the type of person who kept a parrot.Mark Twain

4 more replies
Relevance 75.03%

   Hi,I have an inspiron 9400 that has been having some issues lately.  As of right now, when I push the power button, the power light comes on but it does not boot or even post.  The Num lock stays on and the caps lock and scroll lock lights blink for about 40 seconds then the whole thing shuts off.  This can obviously be only a few things but, how to I figure out what those blinking lights mean.  I have search dell support but have found nothing.  Any help is greatly appreciated. Thanks 

Answer:blinking Caps lock and Scroll lock/ no boot up

Try reseating your RAM securely in their slots.  I have read that blinking of any of the lock indicators is a sign of memory failure.

21 more replies
Relevance 75.03%

Hi. I recently bought a new R5-417T laptop, and in the process of personalisation found no intuitive way to disable the caps-lock or num-lock notifications. (Windows 10 btw)  ^Notification in question^ How would I go about disabling this? I've tried looking in the BIOS, in regedit and some mythical "Launch Manager" program bundled with older acer laptops that I can't find a working version for.

Answer:How to DISABLE Caps-lock and Num-lock screen notif...

Caps lock is thr Caps lock key.For Num lock try Fn and F11.

7 more replies
Relevance 75.03%

Hello my friend.
i have a problem woth my EliteBook 8460p.
the caps lock and num lock blinks 4 times each time and then turns off totally.
what is the problem?..

More replies
Relevance 75.03%

How do I get rid of the gray lock beside the irs.gov website and turn it into a green lock?
There are many websites referenced to tell one what the gray lock means, but none to tell you how to get rid of it.  Please help!

More replies
Relevance 75.03%

On a Lenovo Ideapad 310 and have no idea how to remove the annoying caps lock and number lock indicator. I have tried to turn it off through the advanced settings on the display section however Windows 10 does not seem to allow that adapter screen and instead takes me to another screen that doesn't have the same settings.













Solved!

Go to Solution.

Answer:Caps Lock and Number Lock indicator removal for Wi...

This post offers a solution:https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Flex-3-on-screen-Caps-Lock-Pop-up/m-p/3...

1 more replies
Relevance 75.03%

Hi, i've been reading through an endless amount of forum threads to figure out how to remove this caps lock indicator and have not been able to fix my problem. It seems every solution in the control panel does not fit, and no matter how much i look in Registry Editor I can't find the right folders. I don't have the Widcomm folders.  This is what I have tried. 1. unchecking any caps lock indication in the control panel.2. Looking through Registry Editor to delete/rename/alter files.3. Deleting and re-installing Lenovo Energy Manager. How is this problem fixed for me?  I am running windows 10, and a rather new Lenovo Y50 laptop

More replies
Relevance 75.03%

ANyone have aclue how to get these working again  i did a clean install of windows and for the life of me can't get these to work I've installed all drivers from the drivers page with no luck

More replies
Relevance 75.03%

Lenovo Y720 So, when I hit caps ock or num lock an on screen display tells me whether capslock or num ock has been pushed. While I appreciate it is helpful for some, in my case it become a hinderance. You need to remove "num lock" for single key print screen request, and if I have a short time frame, I am stuck without being able to screenshot until the num lock indicator goes away.  How do I turn off the on screen display.  Now, before you send me to the previously asked questions of similar nature, I have tried. There is no "display settings" in Control Panel. There is no "advanced display settings" on the settings panel. And there is no way to control it through NVIDIA or Intel graphics settings (that I can see).  Thanks kindly. 

More replies
Relevance 75.03%

I have a Acer Aspire 7750G-9411 laptop. I recently had to reload my operating system. since then the "on-screen " icon for the cap's lock and number's lock does not show up. I made sure to download and install all of the drivers but have been able to restore this one frature. Thanks for any help you can give me. Cliff

Answer:on-screen icon for Caps lock / number's lock is mi...

If you are using Windows 8, then it is important to note that the on-screen indicators for Num Lock and Caps Lock are not available in Windows 8. To know more about this, you can refer to the link below:http://acer.custhelp.com/app/answers/detail/a_id/30035/~/no-num-lock-and-caps-lock-indicator If you are using Windows 7, you can check if following the steps below helps:1. Click on "Start".2. Type keyboard in the "Search" field.3. Double-click "Keyboard options".4. Go to "Key settings" tab and then, go to "Key settings" list.5. Locate and double-click "Caps Lock" and select the option "Display Caps Lock status on screen". Click "Finish".6. Follow Step 5 for Nums Lock as well. Hope this will resolve your issue.

1 more replies
Relevance 75.03%

I have an Athlon 650, 512 MB PC running Windows 2000 server edition running Internet Connection Sharing (for cable modem), and IIS 5.0 for several web sites. I also use it as a file server. I usually leave it just sitting there and just update things every once in a while. I don't even have a monitor hooked to it. Should I hit CTRL-ALT-DEL and click the "lock computer" or log out? Would this make it more secure somehow to hacks? I haven't had any problems yet, but I just want it secure as possible.

Any help would be appreciated!
Thanks,

Cory
 

Answer:Win2K server - ICS, IIS, etc... - should I lock the PC - CTRL-ALT-DEL -Lock computer?

According to what microsoft says, Yes, it will provide an added layer of security.
 

2 more replies
Relevance 75.03%

Hello My notebook is not booting, the only sign I get is the Scrool Lock and Caps Lock lights blinking repeatedly three times. Important to mention that this laptop has a history of overheating and problems with its battery (battery was not charging anymore). Thank you very much.

Answer:Caps Lock and Scroll Lock blinking, will not boot up

Hello @FerrariLuis, Match the sequence of 'blinks' to those shown in the table below. Try to reseat the Memory     Hope this helps, for any further queries reply to the post and feel free to join us again !!  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 

7 more replies
Relevance 75.03%

After installing windows 10 I no longer get the Caps Lock & Num Lock hot key indication on the screen for my Think Pad E550. 










Solved!
Go to Solution.

Answer:Hot Keys for Caps lock/Num lock indicator dont wor...

Hi DBooker,
 
Welcome to Lenovo Forums!
 
Try uninstalling and reinstalling the hotkeys from the device manager.
 
Please let me know whether the above step helped you.            
Thank you, have a good day.
 
Did someone help you today? Click on the ?upper half star? at the left side of the post to thank them with a Kudo!
 
Regards,
Naveen.v

3 more replies
Relevance 75.03%

I have a Vista home premium Thirty Two bit on a HP DV Six Thousand laptop.
A few days ago, I have no idea how, but the scroll lock has been turned on. This is also the num lock key. so now my down and right arrows don't work and neither do my number keys, except numbers 6 and 5. Please help. The signs that are doubled up with the number keys don't work either since the num ock is on. This is so frustrating. How can I turn this scroll lock / num lock key off?
Thanks in advance.

Answer:Unlock Scroll lock / Num lock keys on HP DV 6 Thousand

Welcome
How to Activate the Scroll Lock on an HP Pavilion DV6000 Laptop | eHow.com

1 more replies
Relevance 75.03%

Hi, im using a Packard Bell butterfly touch and until recently this had been my linux machine with my full size laptop running windows, however with windows 8 I decided id utilize the touchscreen on this machine and have a swap around. Replaced Ubuntu with Windows 8 fine however now on some of my keys the fn key is reversed (Ive included a picture to show which keys). The keys affected imply that number lock is on, however it is not and i have ensured so using registry editor, stick keys is not on either.

Any help much appreciated as this is driving me mad and makes typing very awkward...

cheers
kez

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8 Pro, 64 bit
Processor: Genuine Intel(R) CPU U2300 @ 1.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3998 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family (Microsoft Corporation - WDDM 1.1), 1807 Mb
Hard Drives: C: Total - 670401 MB, Free - 482981 MB; D: Total - 29691 MB, Free - 26409 MB;
Motherboard: Packard Bell, SJM12-MS-CAP
Antivirus: Windows Defender, Disabled
 

More replies
Relevance 75.03%

Good afternoon,

I just did a clean install of 7 to fix errors with my laptop, and it fixed one, but not the other main issues,
My caps lock, and number lock button on the keyboard don't have a light on it and the pop up that is supposed to pop up doesn't show up on screen.
I figured by doing a clean install it would all magically appear again... I was wrong, I have tweaked everything I could think of looking/trying to change setting from the keyboard in control panel, (including messing around with ease of use) and Gateways so called "support" area was of no help, as well as googling the issue has led me down a path of useless tips, I have also looked on this forum for help.

Any help in this area would be GREATLY appreciated!!

Answer:Caps Lock/Num Lock, on screen pop up gone Gateway NV77

Ok, I have a problem I have set up the sound, and it does not play a sound.

1 more replies
Relevance 75.03%

I have an HP Pavilion Laptop that is about 2 years old. I usually keep it in Hibernate mode but last night I shut it down totally and this morning woke up and the Caps lock and Num lock keys are blinking. Any clues as to what the problem is? All led lights on top are lit. Screen does not come up at all. I am going to try the hard reset to see if that is the problem. Any ideas would help.
 

Answer:Hp Pavilion Blinking Caps Lock and Num Lock keys

Hi, Welcome to TSG forums!
You might try booting it into safe mode....while computer is booting, continously tap the F8 key. This should open it in safe mode. If it does, use the arrow keys to move up to 'last known good configuration' click on enter, let the machine do its thing.
Let us know how it goes
Vicks
 

2 more replies
Relevance 75.03%

Hi. I recently bought a new R5-417T laptop, and in the process of personalisation found no intuitive way to disable the caps-lock or num-lock notifications. (Windows 10 btw)  ^Notification in question^ How would I go about disabling this? I've tried looking in the BIOS, in regedit and some mythical "Launch Manager" program bundled with older acer laptops that I can't find a working version for.

Answer:How to DISABLE Caps-lock and Num-lock screen notif...

Caps lock is thr Caps lock key.For Num lock try Fn and F11.

6 more replies
Relevance 75.03%

Hiii there, I have just locked my personal folder through Priyan's lock but unable to unlock it again. An icon of Control panel is being shown instead of default icon. and when I am opening it, control panel window is shown. What to do? ***email removed*** It will be a great help as this folder contain very important personal documents. Please reply asap.
 

Answer:unlock folder lock protected by priyans lock

11 more replies
Relevance 75.03%

I went to get my HP dv4 Pavilion laptop after work tonight to check email and i opened it up and moved around the mouse to wake it up...the lights on they keyboard all came on as if it were starting but the screen stayed black. I waited a few minutes because sometimes it's been known to take a few seconds to actually kick on...but nothing happened so I forced shutdown by holding the power button. Turned it back on and the screen came on(with a "your system didn't shut down properly error screen) but it still started, but now the Caps Lock and Scroll keys had blinking lights on the side and top, blinking together about every second. I tried tapping the buttons and nothing happened. What caused this and how can i get rid of the blinking. I've read from doing a google search that shutting down, taking the battery out and unplugging from the A/C adapter and holding the power button for 15 seconds takes care of the problem...but I would like to make sure that is safe before trying as this is a fairly new laptop(just got it at Christmas time). I'm running Windows 7 if that makes a difference. would also like to add that I just noticed that my little batter icon says it is plugged in but not charging....it's sitting at 80%....this is a brand new ac adapter that I just got last week...so I hope it's not that.Thank you for any help you can give me....and sorry if this isn't the right forum....it seemed to be the best fit.

Answer:Scroll/Num Lock and Caps Lock LED's blinking and battery not...

In order to help you further, could you please provide us with more information about your computer? Please post the specific model number or the (PN - Part Number) from the white tag on your computer. This will help us locate drivers and identify correct parts for your specific model. Make sure you've got the latest HP system BIOS installed.

9 more replies
Relevance 75.03%

My hp touchsmart tx2 when I power on the display stays black but num lock and caps lock lights flash ?

More replies
Relevance 75.03%

Caps lock and scroll lock blinking, will not boot up 

Answer:caps lock and scroll lock blinking, will not boot up

Hi, Can you match the sequence of 'blinks' to those shown in the table below.  Can you post back with the full Model No. and Product No. of your notebook - see Here for a guide on locating this information. Regards, DP-K 

7 more replies
Relevance 74.21%

Every time I press caps lock, to turn on or turn off, I can't keep typing until some process completes. The icon for capson/capsoff comes onscreen, and while it's there I can't keep typing, until some time passes. Very frustrating!
 

Answer:caps lock function takes a long time and bogs the computer

can i disable the onscreen icon - maybe that's taking processor time
 

1 more replies
Relevance 73.8%

When you choose lock the taskbar, it does stop you from resizing sections of it but it doesn't stop you from doing other things, like re-arranging icons in the quicklaunch folder.

Is there any way I can lock the icon layout in quicklaunch? Sometimes I might accidentally drop something in there when I meant to be dragging it to do an "open with", or I might accidentally click as I'm moving my mouse over the icons and it drags an icon to a different position and I have to figure out where to drag it back to, and in the most bizarre Windows feature ever ... if I then shutdown and startup, despite having moved that icon back to it's original position, after startup it'll be back to the wrong position (that it only spent 3 seconds being in by mistake).

Currently I just have a screenshot of my icons and have to use that as reference to keep them in the places I want them. Example ( imgur.com/UjltgAh ):

Answer:"Lock the Taskbar" doesn't really lock it, how can I truly lock it?

This seems like it will do what you want if the bottom icon is considered the thumbnail but I think they mean the aero peek thumbnail.
http://rammichael.com/7-taskbar-tweaker

5 more replies
Relevance 73.8%

When you choose lock the taskbar, it does stop you from resizing sections of it but it doesn't stop you from doing other things, like re-arranging icons in the quicklaunch folder.

Is there any way I can lock the icon layout in quicklaunch? Sometimes I might accidentally drop something in there when I meant to be dragging it to do an "open with", or I might accidentally click as I'm moving my mouse over the icons and it drags an icon to a different position and I have to figure out where to drag it back to, and in the most bizarre Windows feature ever ... if I then shutdown and startup, despite having moved that icon back to it's original position, after startup it'll be back to the wrong position (that it only spent 3 seconds being in by mistake).

Currently I just have a screenshot of my icons and have to use that as reference to keep them in the places I want them. Example ( imgur.com/UjltgAh ):

More replies
Relevance 73.8%

I need help. I will explain when I believe the problem began. I Had windows xp running with 3 harddrives and a Cdrom drive. My CdRom drive began to give me problems, so I was going to swap it with one from one of my other computers. At the same time I wanted to change the way I had all my drives connected. I had originally had the 80 gig drive as a Primary Master, with a smaller drive acting as the Slave. I also had the Cdrom as Master Secondary drive and a smaller drive attached as the Slave. Now everthing was running fine, exept that my cdrom drive would read the discs only if it would start up with the disk in the drive. If I tried to change it, windows would ask me to place a disk in the F: drive, when there already was one. I thought to replace the CdRom drive with another working device. while at the same time I decided to change up my Connections. I took the "new" cd rom drive and made it Slave Primary to the Master 80 Gig drive. then I took the two smaller drives and put them together as sencondary devices. when I tried to turn on the computer all that happens is, as soon as I touch the power my 3 lights on my keyboard come on. Num Lock Caps Lock and Scroll Lock. I know the drive is turning on because I can feel & here it wirr. I tried taking everything off except for the 80 gig drive and I still got the same problem. Later on I noticed that there are a bunch of smaller connections that come from the front of my computer power, sleep, and reset buttons. ... Read more

Answer:NumLock Caps Lock & Scroll Lock all lit up!!??

8 more replies
Relevance 73.8%

Hi All.

I have a new one installed Lenovo T450s with Windows 10 Entreprise.
I have joined the machine into a domain without some active GPO.
When I'm at home or sitting at a customer and must unlock the screen, it takes a war! It is as if searching for the DNS server for my AD domain as my PC is a member of.
In Windows 7 or Windows 8 there is no problem.
This is not a problem in Windows 7 or Windows 8.
Some have suggestions?

Thank you

More replies
Relevance 73.8%

Hello! Recently, I turned on the on screen indicators for caps and num lock by accident when trying to get the pop-up window to stop opening every time I hit one of the buttons. Now I don't know how to disable it, and it's a pain while playing games. Solutions tried:Going to preference, there is no "On-Screen Display Tab"Going to run the regedit. Any help would be appreciated!












Solved!

Go to Solution.

Answer:Y50 Remove Caps lock/Num lock indicator?

hi Vilvern,
 
Welcome to Lenovo Community Forums!
 
AFAIK,
  If the system does not have CAPS OSD under Control Panel / Uninstall a Program to uninstall
You will need to Uninstall the Lenovo Energy managemenr Under the Programs / Uninstall a program.
 
Regards
Solid Cruver




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Relevance 73.8%

Ok I've been suffering this issue with Windows 10 for as long as I can remember, and it's stopping me using it as the primary OS.

In short I have two, intermittent issues which nothing I do seems to resolve.

1: After waking up from sleep and typing my username password and hitting return, the screen goes black. Cursor moves, Windows + P operates (Screen options do appear from the right) but doesn't actually make any difference, and I'm stuck having to hard reset because ctrl alt del doesn't work either. This isn't an every time issue, hence googling seems to fail miserably because all the examples are people getting it every time. This, for me, is a 3 in 10 regularity.

2: Logging a user off occasionally sees the lock screen ... locking up. Ironically. Mouse moves, and power button DOES work but that's all that works.

These issues are plaguing me and I just cannot fix them - endless googling has left me empty handed, and I've tried disabling SLI. No help. I've tried disabling apps. No help. Nothing I do makes any difference and event viewer doesn't seem to reveal anything useful either.

Anyone got any idea how I can resolve this?

System is:

132GB SSD OCZ
2TB Seagate HDD
4790K
2x980Ti SLI
32 GB RAM @ 1800 Corsair
Asus Z97-A
Windows 10 & Windows 7 dual boot 64.

Answer:Being absolutely tortured by lock screen lock ups...please help!

Disable Internal PLL Overvoltage. It should be 'Auto' by default. Choose 'Disable' from the dropdown and disable it.

Attachment 89957

See how it goes. Let us know.

17 more replies
Relevance 73.8%

Dear team,                                           I have HP Probook 4440s Laptop.My laptop working fine, But Caps lock light is not glowing. I cant understand the if caps lock its on or off.Kindly please provide the solution for this problem\                                                                               Thanking you ,                                                                                                                                               With regards,                                                                                              &n... Read more

More replies
Relevance 73.8%

Good Day  Please can you help me. I have an ideapd z580 and recently noticed that I'm unable to determine whether my num lock or caps lock is on. There used to be an icon indicator but not anymore and I don't know why. I also tried to go on to advanced settings (under screen resolution) and I noticed that I don't have the "on-screen display tab". What can i do? 

Answer:caps lock and num lock indicator isn't working....

Hi jarryd,
 
Welcome to the community,
 
This should be fixed easily by installing the latest version of the power management driver.
 
I am not sure what machine you have so you can find it at our support site:
 
support.lenovo.com

2 more replies
Relevance 73.8%

these lights flash inconjuction with a pop down menu resembling a right click on the mouse that did not ocurr. At times the system will navigte backwards as if the back tab were hit when it was not

Answer:Flashing num lock and scroll lock lights

Manuals Dell™ Dimension™ 2400 Serieshttp://support.dell.com/support/edo...Service manual - viewhttp://support.dell.com/support/edo...Service manual - Advanced troubleshootinghttp://support.dell.com/support/edo...There's nothing in there about flashing num lock and scroll lock leds, but there's other info. ......Your system produces normal error beeps, or diagnostic error patterns of leds, rather than flashing leds on the keyboard to indicate errors. You could try searching for something such asDimension flashing "num lock"orDimension blinking "Num Lock"Many "hits" are for systems much newer than yours. Very few if any are for Dimension models. .......Have you tried a different keyboard ?....."these lights flash inconjuction with a pop down menu resembling a right click on the mouse that did not ocurr"What words are on the menu ?........My guess would be your power supply is failing.If the leds flash BEFORE the operating system loads, it probably IS failing. If you can borrow a power supply to try with your system, try connecting that. ............Or failing capacitors can cause all sorts of weird symptoms. Open up your case and examine the mboard to see if you have bad capacitors, and/or other findable signs of mboard damage .What to look for, mboard symptoms, example pictures:http://www.badcaps.net/pages.php?vid=5Home page that site - what the problem is caused by- he says there are STILL bad capacitors on more recent mboards.http://www.badcaps.net/Pictures of blown ca... Read more

14 more replies
Relevance 73.8%

Ok I've been suffering this issue with Windows 10 for as long as I can remember, and it's stopping me using it as the primary OS.

In short I have two, intermittent issues which nothing I do seems to resolve.

1: After waking up from sleep and typing my username password and hitting return, the screen goes black. Cursor moves, Windows + P operates (Screen options do appear from the right) but doesn't actually make any difference, and I'm stuck having to hard reset because ctrl alt del doesn't work either. This isn't an every time issue, hence googling seems to fail miserably because all the examples are people getting it every time. This, for me, is a 3 in 10 regularity.

2: Logging a user off occasionally sees the lock screen ... locking up. Ironically. Mouse moves, and power button DOES work but that's all that works.

These issues are plaguing me and I just cannot fix them - endless googling has left me empty handed, and I've tried disabling SLI. No help. I've tried disabling apps. No help. Nothing I do makes any difference and event viewer doesn't seem to reveal anything useful either.

Anyone got any idea how I can resolve this?

System is:

132GB SSD OCZ
2TB Seagate HDD
4790K
2x980Ti SLI
32 GB RAM @ 1800 Corsair
Asus Z97-A
Windows 10 & Windows 7 dual boot 64.

More replies
Relevance 73.8%

sir i really want to know that why windows phones are so behind to android phones. Till now you were not been able to provide us with patern lock or seprate locks for different application, so that i can secure my personal things with a another lock system. even in new window 10 preview there is no option of this type or lock. why you are so behind to android, atleast provide use with different apps lock system so that if onces my phone is been unlock then also i am ensure that my personal files could not been open. when these facities will be provided to us, when we all switch to android phones.

Answer:About Pattern lock & Separate Application Lock..

Originally Posted by tangledW There's no pattern unlock on iPhone either.
Just go buy an Android if it's so important to you, but don't act like your files aren't secure without it. There's still the code lock, and Windows Hello features are coming as well. How many Androids have retina scan unlock?

3 more replies
Relevance 73.8%

why is my caps lock and scroll lock flashing? is there's a problem whit my laptop? my laptop is compaq with window vista..how to resolve the problem?

Answer:caps lock and scroll lock blinking

Might be a ram issue try either removing one at a time if you have two.If not then try reseating the one installed and also do a memory diagnostic test.

2 more replies